git.monstr.eu Git - linux-2.6-microblaze.git/log

selftests/ftrace: Fix eprobe syntax test case to check filter support

Fix eprobe syntax test case to check whether the kernel supports the filter
on eprobe for filter syntax test command. Without this fix, this test case
will fail if the kernel supports eprobe but doesn't support the filter on
eprobe.

Link: https://lore.kernel.org/all/167309834742.640500.379128668288448035.stgit@devnote3/
Fixes: 9e14bae7d049 ("selftests/ftrace: Add eprobe syntax error testcase")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>

tracing/eprobe: Fix to add filter on eprobe description in README file

Fix to add a description of the filter on eprobe in README file. This
is required to identify the kernel supports the filter on eprobe or not.

Link: https://lore.kernel.org/all/167309833728.640500.12232259238201433587.stgit@devnote3/
Fixes: 752be5c5c910 ("tracing/eprobe: Add eprobe filter support")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>

x86/kprobes: Fix arch_check_optimized_kprobe check within optimized_kprobe range

When arch_prepare_optimized_kprobe calculating jump destination address,
it copies original instructions from jmp-optimized kprobe (see
__recover_optprobed_insn), and calculated based on length of original
instruction.

arch_check_optimized_kprobe does not check KPROBE_FLAG_OPTIMATED when
checking whether jmp-optimized kprobe exists.
As a result, setup_detour_execution may jump to a range that has been
overwritten by jump destination address, resulting in an inval opcode error.

For example, assume that register two kprobes whose addresses are
<func+9> and <func+11> in "func" function.
The original code of "func" function is as follows:

   0xffffffff816cb5e9 <+9>:     push   %r12
   0xffffffff816cb5eb <+11>:    xor    %r12d,%r12d
   0xffffffff816cb5ee <+14>:    test   %rdi,%rdi
   0xffffffff816cb5f1 <+17>:    setne  %r12b
   0xffffffff816cb5f5 <+21>:    push   %rbp

1.Register the kprobe for <func+11>, assume that is kp1, corresponding optimized_kprobe is op1.
  After the optimization, "func" code changes to:

   0xffffffff816cc079 <+9>:     push   %r12
   0xffffffff816cc07b <+11>:    jmp    0xffffffffa0210000
   0xffffffff816cc080 <+16>:    incl   0xf(%rcx)
   0xffffffff816cc083 <+19>:    xchg   %eax,%ebp
   0xffffffff816cc084 <+20>:    (bad)
   0xffffffff816cc085 <+21>:    push   %rbp

Now op1->flags == KPROBE_FLAG_OPTIMATED;

2. Register the kprobe for <func+9>, assume that is kp2, corresponding optimized_kprobe is op2.

register_kprobe(kp2)
  register_aggr_kprobe
    alloc_aggr_kprobe
      __prepare_optimized_kprobe
        arch_prepare_optimized_kprobe
          __recover_optprobed_insn    // copy original bytes from kp1->optinsn.copied_insn,
                                      // jump address = <func+14>

3. disable kp1:

disable_kprobe(kp1)
  __disable_kprobe
    ...
    if (p == orig_p || aggr_kprobe_disabled(orig_p)) {
      ret = disarm_kprobe(orig_p, true)       // add op1 in unoptimizing_list, not unoptimized
      orig_p->flags |= KPROBE_FLAG_DISABLED;  // op1->flags ==  KPROBE_FLAG_OPTIMATED | KPROBE_FLAG_DISABLED
    ...

4. unregister kp2
__unregister_kprobe_top
  ...
  if (!kprobe_disabled(ap) && !kprobes_all_disarmed) {
    optimize_kprobe(op)
      ...
      if (arch_check_optimized_kprobe(op) < 0) // because op1 has KPROBE_FLAG_DISABLED, here not return
        return;
      p->kp.flags |= KPROBE_FLAG_OPTIMIZED;   //  now op2 has KPROBE_FLAG_OPTIMIZED
  }

"func" code now is:

   0xffffffff816cc079 <+9>:     int3
   0xffffffff816cc07a <+10>:    push   %rsp
   0xffffffff816cc07b <+11>:    jmp    0xffffffffa0210000
   0xffffffff816cc080 <+16>:    incl   0xf(%rcx)
   0xffffffff816cc083 <+19>:    xchg   %eax,%ebp
   0xffffffff816cc084 <+20>:    (bad)
   0xffffffff816cc085 <+21>:    push   %rbp

5. if call "func", int3 handler call setup_detour_execution:

  if (p->flags & KPROBE_FLAG_OPTIMIZED) {
    ...
    regs->ip = (unsigned long)op->optinsn.insn + TMPL_END_IDX;
    ...
  }

The code for the destination address is

   0xffffffffa021072c:  push   %r12
   0xffffffffa021072e:  xor    %r12d,%r12d
   0xffffffffa0210731:  jmp    0xffffffff816cb5ee <func+14>

However, <func+14> is not a valid start instruction address. As a result, an error occurs.

Link: https://lore.kernel.org/all/20230216034247.32348-3-yangjihong1@huawei.com/
Fixes: f66c0447cca1 ("kprobes: Set unoptimized flag after unoptimizing code")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Cc: stable@vger.kernel.org
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>

x86/kprobes: Fix __recover_optprobed_insn check optimizing logic

Since the following commit:

commit f66c0447cca1 ("kprobes: Set unoptimized flag after unoptimizing code")

modified the update timing of the KPROBE_FLAG_OPTIMIZED, a optimized_kprobe
may be in the optimizing or unoptimizing state when op.kp->flags
has KPROBE_FLAG_OPTIMIZED and op->list is not empty.

The __recover_optprobed_insn check logic is incorrect, a kprobe in the
unoptimizing state may be incorrectly determined as unoptimizing.
As a result, incorrect instructions are copied.

The optprobe_queued_unopt function needs to be exported for invoking in
arch directory.

Link: https://lore.kernel.org/all/20230216034247.32348-2-yangjihong1@huawei.com/
Fixes: f66c0447cca1 ("kprobes: Set unoptimized flag after unoptimizing code")
Cc: stable@vger.kernel.org
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>

kprobes: Fix to handle forcibly unoptimized kprobes on freeing_list

Since forcibly unoptimized kprobes will be put on the freeing_list directly
in the unoptimize_kprobe(), do_unoptimize_kprobes() must continue to check
the freeing_list even if unoptimizing_list is empty.

This bug can happen if a kprobe is put in an instruction which is in the
middle of the jump-replaced instruction sequence of an optprobe, *and* the
optprobe is recently unregistered and queued on unoptimizing_list.
In this case, the optprobe will be unoptimized forcibly (means immediately)
and put it into the freeing_list, expecting the optprobe will be handled in
do_unoptimize_kprobe().
But if there is no other optprobes on the unoptimizing_list, current code
returns from the do_unoptimize_kprobe() soon and does not handle the
optprobe which is on the freeing_list. Then the optprobe will hit the
WARN_ON_ONCE() in the do_free_cleaned_kprobes(), because it is not handled
in the latter loop of the do_unoptimize_kprobe().

To solve this issue, do not return from do_unoptimize_kprobes() immediately
even if unoptimizing_list is empty.

Moreover, this change affects another case. kill_optimized_kprobes() expects
kprobe_optimizer() will just free the optprobe on freeing_list.
So I changed it to just do list_move() to freeing_list if optprobes are on
unoptimizing list. And the do_unoptimize_kprobe() will skip
arch_disarm_kprobe() if the probe on freeing_list has gone flag.

Link: https://lore.kernel.org/all/Y8URdIfVr3pq2X8w@xpf.sh.intel.com/
Link: https://lore.kernel.org/all/167448024501.3253718.13037333683110512967.stgit@devnote3/
Fixes: e4add247789e ("kprobes: Fix optimize_kprobe()/unoptimize_kprobe() cancellation logic")
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Linux 6.2

Merge tag 'x86-urgent-2023-02-19' of git://git./linux/kernel/git/tip/tip

Pull x86 fix from Thomas Gleixner:
"A single fix for x86.

  Revert the recent change to the MTRR code which aimed to support
  SEV-SNP guests on Hyper-V. It caused a regression on XEN Dom0 kernels.

  The underlying issue of MTTR (mis)handling in the x86 code needs some
  deeper investigation and is definitely not 6.2 material"

* tag 'x86-urgent-2023-02-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mtrr: Revert 90b926e68f50 ("x86/pat: Fix pat_x_mtrr_type() for MTRR disabled case")

Merge tag 'timers-urgent-2023-02-19' of git://git./linux/kernel/git/tip/tip

Pull timer fix from Thomas Gleixner:
"A fix for a long standing issue in the alarmtimer code.

  Posix-timers armed with a short interval with an ignored signal result
  in an unpriviledged DoS. Due to the ignored signal the timer switches
  into self rearm mode. This issue had been "fixed" before but a rework
  of the alarmtimer code 5 years ago lost that workaround.

  There is no real good solution for this issue, which is also worked
  around in the core posix-timer code in the same way, but it certainly
  moved way up on the ever growing todo list"

* tag 'timers-urgent-2023-02-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  alarmtimer: Prevent starvation by small intervals and SIG_IGN

Merge tag 'irq-urgent-2023-02-19' of git://git./linux/kernel/git/tip/tip

Pull irq fix from Thomas Gleixner:
"A single build fix for the PCI/MSI infrastructure.

  The addition of the new alloc/free interfaces in this cycle forgot to
  add stub functions for pci_msix_alloc_irq_at() and pci_msix_free_irq()
  for the CONFIG_PCI_MSI=n case"

* tag 'irq-urgent-2023-02-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  PCI/MSI: Provide missing stubs for CONFIG_PCI_MSI=n

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull kvm/x86 fixes from Paolo Bonzini:

- zero all padding for KVM_GET_DEBUGREGS

- fix rST warning

- disable vPMU support on hybrid CPUs

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  kvm: initialize all of the kvm_debugregs structure before sending it to userspace
  perf/x86: Refuse to export capabilities for hybrid PMUs
  KVM: x86/pmu: Disable vPMU support on hybrid CPUs (host PMUs)
  Documentation/hw-vuln: Fix rST warning

Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull arm64 regression fix from Will Deacon:
"Apologies for the _extremely_ late pull request here, but we had a
  'perf' (i.e. CPU PMU) regression on the Apple M1 reported on Wednesday
  [1] which was introduced by bd2756811766 ("perf: Rewrite core context
  handling") during the merge window.

  Mark and I looked into this and noticed an additional problem caused
  by the same patch, where the 'CHAIN' event (used to combine two
  adjacent 32-bit counters into a single 64-bit counter) was not being
  filtered correctly. Mark posted a series on Thursday [2] which
  addresses both of these regressions and I queued it the same day.

  The changes are small, self-contained and have been confirmed to fix
  the original regression.

  Summary:

   - Fix 'perf' regression for non-standard CPU PMU hardware (i.e. Apple
     M1)"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: perf: reject CHAIN events at creation time
  arm_pmu: fix event CPU filtering

Merge tag 'block-6.2-2023-02-17' of git://git.kernel.dk/linux

Pull block fix from Jens Axboe:
"I guess this is what can happen when you prep things early for going
  away, something else comes in last minute. This one fixes another
  regression in 6.2 for NVMe, from this release, and hence we should
  probably get it submitted for 6.2.

  Still waiting for the original reporter (see bugzilla linked in the
  commit) to test this, but Keith managed to setup and recreate the
  issue and tested the patch that way"

* tag 'block-6.2-2023-02-17' of git://git.kernel.dk/linux:
  nvme-pci: refresh visible attrs for cmb attributes

Merge tag 'mm-hotfixes-stable-2023-02-17-15-16-2' of git://git./linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
"Six hotfixes. Five are cc:stable: four for MM, one for nilfs2.

  Also a MAINTAINERS update"

* tag 'mm-hotfixes-stable-2023-02-17-15-16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  nilfs2: fix underflow in second superblock position calculations
  hugetlb: check for undefined shift on 32 bit architectures
  mm/migrate: fix wrongly apply write bit after mkdirty on sparc64
  MAINTAINERS: update FPU EMULATOR web page
  mm/MADV_COLLAPSE: set EAGAIN on unexpected page refcount
  mm/filemap: fix page end in filemap_get_read_batch

nilfs2: fix underflow in second superblock position calculations

Macro NILFS_SB2_OFFSET_BYTES, which computes the position of the second
superblock, underflows when the argument device size is less than 4096
bytes.  Therefore, when using this macro, it is necessary to check in
advance that the device size is not less than a lower limit, or at least
that underflow does not occur.

The current nilfs2 implementation lacks this check, causing out-of-bound
block access when mounting devices smaller than 4096 bytes:

I/O error, dev loop0, sector 36028797018963960 op 0x0:(READ) flags 0x0
phys_seg 1 prio class 2
NILFS (loop0): unable to read secondary superblock (blocksize = 1024)

In addition, when trying to resize the filesystem to a size below 4096
bytes, this underflow occurs in nilfs_resize_fs(), passing a huge number
of segments to nilfs_sufile_resize(), corrupting parameters such as the
number of segments in superblocks.  This causes excessive loop iterations
in nilfs_sufile_resize() during a subsequent resize ioctl, causing
semaphore ns_segctor_sem to block for a long time and hang the writer
thread:

INFO: task segctord:5067 blocked for more than 143 seconds.
      Not tainted 6.2.0-rc8-syzkaller-00015-gf6feea56f66d #0
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:segctord        state:D stack:23456 pid:5067  ppid:2
flags:0x00004000
Call Trace:
  <TASK>
  context_switch kernel/sched/core.c:5293 [inline]
  __schedule+0x1409/0x43f0 kernel/sched/core.c:6606
  schedule+0xc3/0x190 kernel/sched/core.c:6682
  rwsem_down_write_slowpath+0xfcf/0x14a0 kernel/locking/rwsem.c:1190
  nilfs_transaction_lock+0x25c/0x4f0 fs/nilfs2/segment.c:357
  nilfs_segctor_thread_construct fs/nilfs2/segment.c:2486 [inline]
  nilfs_segctor_thread+0x52f/0x1140 fs/nilfs2/segment.c:2570
  kthread+0x270/0x300 kernel/kthread.c:376
  ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308
  </TASK>
...
Call Trace:
  <TASK>
  folio_mark_accessed+0x51c/0xf00 mm/swap.c:515
  __nilfs_get_page_block fs/nilfs2/page.c:42 [inline]
  nilfs_grab_buffer+0x3d3/0x540 fs/nilfs2/page.c:61
  nilfs_mdt_submit_block+0xd7/0x8f0 fs/nilfs2/mdt.c:121
  nilfs_mdt_read_block+0xeb/0x430 fs/nilfs2/mdt.c:176
  nilfs_mdt_get_block+0x12d/0xbb0 fs/nilfs2/mdt.c:251
  nilfs_sufile_get_segment_usage_block fs/nilfs2/sufile.c:92 [inline]
  nilfs_sufile_truncate_range fs/nilfs2/sufile.c:679 [inline]
  nilfs_sufile_resize+0x7a3/0x12b0 fs/nilfs2/sufile.c:777
  nilfs_resize_fs+0x20c/0xed0 fs/nilfs2/super.c:422
  nilfs_ioctl_resize fs/nilfs2/ioctl.c:1033 [inline]
  nilfs_ioctl+0x137c/0x2440 fs/nilfs2/ioctl.c:1301
  ...

This fixes these issues by inserting appropriate minimum device size
checks or anti-underflow checks, depending on where the macro is used.

Link: https://lkml.kernel.org/r/0000000000004e1dfa05f4a48e6b@google.com
Link: https://lkml.kernel.org/r/20230214224043.24141-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: <syzbot+f0c4082ce5ebebdac63b@syzkaller.appspotmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

hugetlb: check for undefined shift on 32 bit architectures

Users can specify the hugetlb page size in the mmap, shmget and
memfd_create system calls.  This is done by using 6 bits within the flags
argument to encode the base-2 logarithm of the desired page size.  The
routine hstate_sizelog() uses the log2 value to find the corresponding
hugetlb hstate structure.  Converting the log2 value (page_size_log) to
potential hugetlb page size is the simple statement:

1UL << page_size_log

Because only 6 bits are used for page_size_log, the left shift can not be
greater than 63.  This is fine on 64 bit architectures where a long is 64
bits.  However, if a value greater than 31 is passed on a 32 bit
architecture (where long is 32 bits) the shift will result in undefined
behavior.  This was generally not an issue as the result of the undefined
shift had to exactly match hugetlb page size to proceed.

Recent improvements in runtime checking have resulted in this undefined
behavior throwing errors such as reported below.

Fix by comparing page_size_log to BITS_PER_LONG before doing shift.

Link: https://lkml.kernel.org/r/20230216013542.138708-1-mike.kravetz@oracle.com
Link: https://lore.kernel.org/lkml/CA+G9fYuei_Tr-vN9GS7SfFyU1y9hNysnf=PB7kT0=yv4MiPgVg@mail.gmail.com/
Fixes: 42d7395feb56 ("mm: support more pagesizes for MAP_HUGETLB/SHM_HUGETLB")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reviewed-by: Jesper Juhl <jesperjuhl76@gmail.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Anders Roxell <anders.roxell@linaro.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Sasha Levin <sashal@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/migrate: fix wrongly apply write bit after mkdirty on sparc64

Nick Bowler reported another sparc64 breakage after the young/dirty
persistent work for page migration (per "Link:" below). That's after a
similar report [2].

It turns out page migration was overlooked, and it wasn't failing before
because page migration was not enabled in the initial report test
environment.

David proposed another way [2] to fix this from sparc64 side, but that
patch didn't land somehow. Neither did I check whether there's any other
arch that has similar issues.

Let's fix it for now as simple as moving the write bit handling to be
after dirty, like what we did before.

Note: this is based on mm-unstable, because the breakage was since 6.1 and
we're at a very late stage of 6.2 (-rc8), so I assume for this specific
case we should target this at 6.3.

[1] https://lore.kernel.org/all/20221021160603.GA23307@u164.east.ru/
[2] https://lore.kernel.org/all/20221212130213.136267-1-david@redhat.com/

Link: https://lkml.kernel.org/r/20230216153059.256739-1-peterx@redhat.com
Fixes: 2e3468778dbe ("mm: remember young/dirty bit for page migrations")
Link: https://lore.kernel.org/all/CADyTPExpEqaJiMGoV+Z6xVgL50ZoMJg49B10LcZ=8eg19u34BA@mail.gmail.com/
Signed-off-by: Peter Xu <peterx@redhat.com>
Reported-by: Nick Bowler <nbowler@draconx.ca>
Acked-by: David Hildenbrand <david@redhat.com>
Tested-by: Nick Bowler <nbowler@draconx.ca>
Cc: <regressions@lists.linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Merge tag 'powerpc-6.2-6' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fix from Michael Ellerman:

- Prevent fallthrough to hash TLB flush when using radix

Thanks to Benjamin Gray and Erhard Furtner.

* tag 'powerpc-6.2-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: Prevent fallthrough to hash TLB flush when using radix

Merge tag 'nfs-for-6.2-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull NFS client fix from Trond Myklebust:
"Unfortunately, we found another bug in the NFSv4.2 READ_PLUS code.

  Since it has not been possible to fix the bug in time for the 6.2
  release, let's just revert the Kconfig change that enables it:

   - Revert 'NFSv4.2: Change the default KConfig value for READ_PLUS'"

* tag 'nfs-for-6.2-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  Revert "NFSv4.2: Change the default KConfig value for READ_PLUS"

Merge tag 'sound-fix-6.2' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
"A few last-minute fixes. The significant ones are two ASoC SOF
  regression fixes while the rest are trivial HD-audio quirks.

  All are small / one-liners and should be pretty safe to take"

* tag 'sound-fix-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ASoC: SOF: Intel: hda-dai: fix possible stream_tag leak
  ALSA: hda/realtek: Enable mute/micmute LEDs and speaker support for HP Laptops
  ALSA: hda/realtek: fix mute/micmute LEDs don't work for a HP platform.
  ALSA: hda/realtek - fixed wrong gpio assigned
  ALSA: hda: Fix codec device field initializan
  ALSA: hda/conexant: add a new hda codec SN6180
  ASoC: SOF: ops: refine parameters order in function snd_sof_dsp_update8

Merge tag 'gpio-fixes-for-v6.2-part2' of git://git./linux/kernel/git/brgl/linux

Pull gpio fix from Bartosz Golaszewski:

- fix a memory leak in gpio-sim that was triggered every time libgpiod
tests are run in user-space

* tag 'gpio-fixes-for-v6.2-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: sim: fix a memory leak

Merge tag 'ata-6.2-rc8' of git://git./linux/kernel/git/dlemoal/libata

Pull ata fixes from Damien Le Moal:
"Three small fixes for 6.2 final:

   - Disable READ LOG DMA EXT for Samsung MZ7LH drives as these drives
     choke on that command, from Patrick.

   - Add Intel Tiger Lake UP{3,4} to the list of supported AHCI
     controllers (this is not technically a bug fix, but it is trivial
     enough that I add it here), from Simon.

   - Fix code comments in the pata_octeon_cf driver as incorrect
     formatting was causing warnings from kernel-doc, from Randy"

* tag 'ata-6.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  ata: pata_octeon_cf: drop kernel-doc notation
  ata: ahci: Add Tiger Lake UP{3,4} AHCI controller
  ata: libata-core: Disable READ LOG DMA EXT for Samsung MZ7LH

Merge tag 'mmc-v6.2-rc5' of git://git./linux/kernel/git/ulfh/mmc

Pull MMC fixes from Ulf Hansson:
"MMC core:
   - Fix potential resource leaks in SDIO card detection error path

  MMC host:
   - jz4740: Decrease maximum clock rate to workaround bug on JZ4760(B)
   - meson-gx: Fix SDIO support to get some WiFi modules to work again
   - mmc_spi: Fix error handling in ->probe()"

* tag 'mmc-v6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: jz4740: Work around bug on JZ4760(B)
  mmc: mmc_spi: fix error handling in mmc_spi_probe()
  mmc: sdio: fix possible resource leaks in some error paths
  mmc: meson-gx: fix SDIO mode if cap_sdio_irq isn't set

Merge tag 'sched-urgent-2023-02-17' of git://git./linux/kernel/git/tip/tip

Pull scheduler fixes from Ingo Molnar:

- Fix user-after-free bug in call_usermodehelper_exec()

- Fix missing user_cpus_ptr update in __set_cpus_allowed_ptr_locked()

- Fix PSI use-after-free bug in ep_remove_wait_queue()

* tag 'sched-urgent-2023-02-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/psi: Fix use-after-free in ep_remove_wait_queue()
  sched/core: Fix a missed update of user_cpus_ptr
  freezer,umh: Fix call_usermode_helper_exec() vs SIGKILL

Merge tag 'nvme-6.2-2022-02-17' of git://git.infradead.org/nvme into block-6.2

Pull NVMe fix from Christoph:

"nvme fix for Linux 6.2

- fix visibility of the CMB sysfs attributes (Keith Busch)"

* tag 'nvme-6.2-2022-02-17' of git://git.infradead.org/nvme:
nvme-pci: refresh visible attrs for cmb attributes

Revert "NFSv4.2: Change the default KConfig value for READ_PLUS"

This reverts commit 7fd461c47c6cfab4ca4d003790ec276209e52978.

Unfortunately, it has come to our attention that there is still a bug
somewhere in the READ_PLUS code that can result in nfsroot systems on
ARM to crash during boot.

Let's do the right thing and revert this change so we don't break
people's nfsroot setups.

Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

gpio: sim: fix a memory leak

Fix an inverted logic bug in gpio_sim_remove_hogs() that leads to GPIO
hog structures never being freed.

Fixes: cb8c474e79be ("gpio: sim: new testing module")
Reported-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Merge tag 'asoc-fix-v6.2-rc8-2' of https://git./linux/kernel/git/broonie/sound into for-linus

ASoC: One more fix for v6.2

One more fix from Peter which he'd very much like to get into
v6.2.

nvme-pci: refresh visible attrs for cmb attributes

The sysfs group containing the cmb attributes is registered before the
driver knows if they need to be visible or not. Update the group when
cmb attributes are known to exist so the visibility setting is correct.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=217037
Fixes: 86adbf0cdb9ec65 ("nvme: simplify transport specific device attribute handling")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Merge tag 'drm-fixes-2023-02-17' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
"Just a final collection of misc fixes, the biggest disables the
  recently added dynamic debugging support, it has a regression that
  needs some bigger fixes.

  Otherwise a bunch of fixes across the board, vc4, amdgpu and vmwgfx
  mostly, with some smaller i915 and ast fixes.

  drm:
   - dynamic debug disable for now

  fbdev:
   - deferred i/o device close fix

  amdgpu:
   - Fix GC11.x suspend warning
   - Fix display warning

  vc4:
   - YUV planes fix
   - hdmi display fix
   - crtc reduced blanking fix

  ast:
   - fix start address computation

  vmwgfx:
   - fix bo/handle races

  i915:
   - gen11 WA fix"

* tag 'drm-fixes-2023-02-17' of git://anongit.freedesktop.org/drm/drm:
  drm/amd/display: Fail atomic_check early on normalize_zpos error
  drm/amd/amdgpu: fix warning during suspend
  drm/vmwgfx: Do not drop the reference to the handle too soon
  drm/vmwgfx: Stop accessing buffer objects which failed init
  drm/i915/gen11: Wa_1408615072/Wa_1407596294 should be on GT list
  drm: Disable dynamic debug as broken
  drm/ast: Fix start address computation
  fbdev: Fix invalid page access after closing deferred I/O devices
  drm/vc4: crtc: Increase setup cost in core clock calculation to handle extreme reduced blanking
  drm/vc4: hdmi: Always enable GCP with AVMUTE cleared
  drm/vc4: Fix YUV plane handling when planes are in different buffers

MAINTAINERS: update FPU EMULATOR web page

The web page entry for the FPU EMULATOR no longer works. I notified Bill
of this and he asked me to update it to this new entry.

Link: https://lkml.kernel.org/r/20230214170208.17287-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Bill Metzenthen <billm@melbpc.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/MADV_COLLAPSE: set EAGAIN on unexpected page refcount

During collapse, in a few places we check to see if a given small page has
any unaccounted references. If the refcount on the page doesn't match our
expectations, it must be there is an unknown user concurrently interested
in the page, and so it's not safe to move the contents elsewhere.
However, the unaccounted pins are likely an ephemeral state.

In this situation, MADV_COLLAPSE returns -EINVAL when it should return
-EAGAIN. This could cause userspace to conclude that the syscall
failed, when it in fact could succeed by retrying.

Link: https://lkml.kernel.org/r/20230125015738.912924-1-zokeefe@google.com
Fixes: 7d8faaf15545 ("mm/madvise: introduce MADV_COLLAPSE sync hugepage collapse")
Signed-off-by: Zach O'Keefe <zokeefe@google.com>
Reported-by: Hugh Dickins <hughd@google.com>
Acked-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/filemap: fix page end in filemap_get_read_batch

I was running traces of the read code against an RAID storage system to
understand why read requests were being misaligned against the underlying
RAID strips.  I found that the page end offset calculation in
filemap_get_read_batch() was off by one.

When a read is submitted with end offset 1048575, then it calculates the
end page for read of 256 when it should be 255.  "last_index" is the index
of the page beyond the end of the read and it should be skipped when get a
batch of pages for read in @filemap_get_read_batch().

The below simple patch fixes the problem.  This code was introduced in
kernel 5.12.

Link: https://lkml.kernel.org/r/20230208022400.28962-1-coolqyj@163.com
Fixes: cbd59c48ae2b ("mm/filemap: use head pages in generic_file_buffered_read")
Signed-off-by: Qian Yingjin <qian@ddn.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

powerpc/64s: Prevent fallthrough to hash TLB flush when using radix

In the fix reconnecting hash__tlb_flush() to tlb_flush() the
void return on radix__tlb_flush() was not restored and subsequently
falls through to the restored hash__tlb_flush().

Guard hash__tlb_flush() under an else to prevent this.

Fixes: 1665c027afb2 ("powerpc/64s: Reconnect tlb_flush() to hash__tlb_flush()")
Reported-by: "Erhard F." <erhard_f@mailbox.org>
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230217011434.115554-1-bgray@linux.ibm.com

Merge tag 'drm-intel-fixes-2023-02-16' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- Moving gen11 hw wa to the right place. (Matt)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y+47eUvwbafER35/@intel.com

Merge tag 'drm-misc-fixes-2023-02-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

Multiple fixes in vc4 to address issues with YUV planes, HDMI and CRTC;
an invalid page access fix for fbdev, mark dynamic debug as broken, a
double free and refcounting fix for vmwgfx.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230216091905.i5wswy4dd74x4br5@houat

Merge tag 'amd-drm-fixes-6.2-2023-02-15' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-6.2-2023-02-15:

amdgpu:
- Fix GC11.x suspend warning
- Fix display warning

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230216041122.7714-1-alexander.deucher@amd.com

arm64: perf: reject CHAIN events at creation time

Currently it's possible for a user to open CHAIN events arbitrarily,
which we previously tried to rule out in commit:

  ca2b497253ad01c8 ("arm64: perf: Reject stand-alone CHAIN events for PMUv3")

Which allowed the events to be opened, but prevented them from being
scheduled by by using an arm_pmu::filter_match hook to reject the
relevant events.

The CHAIN event filtering in the arm_pmu::filter_match hook was silently
removed in commit:

  bd27568117664b8b ("perf: Rewrite core context handling")

As a result, it's now possible for users to open CHAIN events, and for
these to be installed arbitrarily.

Fix this by rejecting CHAIN events at creation time. This avoids the
creation of events which will never count, and doesn't require using the
dynamic filtering.

Attempting to open a CHAIN event (0x1e) will now be rejected:

| # ./perf stat -e armv8_pmuv3/config=0x1e/ ls
| perf
|
|  Performance counter stats for 'ls':
|
|    <not supported>      armv8_pmuv3/config=0x1e/
|
|        0.002197470 seconds time elapsed
|
|        0.000000000 seconds user
|        0.002294000 seconds sys

Other events (e.g. CPU_CYCLES / 0x11) will open as usual:

| # ./perf stat -e armv8_pmuv3/config=0x11/ ls
| perf
|
|  Performance counter stats for 'ls':
|
|            2538761      armv8_pmuv3/config=0x11/
|
|        0.002227330 seconds time elapsed
|
|        0.002369000 seconds user
|        0.000000000 seconds sys

Fixes: bd2756811766 ("perf: Rewrite core context handling")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230216141240.3833272-3-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>

arm_pmu: fix event CPU filtering

Janne reports that perf has been broken on Apple M1 as of commit:

  bd27568117664b8b ("perf: Rewrite core context handling")

That commit replaced the pmu::filter_match() callback with
pmu::filter(), whose return value has the opposite polarity, with true
implying events should be ignored rather than scheduled. While an
attempt was made to update the logic in armv8pmu_filter() and
armpmu_filter() accordingly, the return value remains inverted in a
couple of cases:

* If the arm_pmu does not have an arm_pmu::filter() callback,
  armpmu_filter() will always return whether the CPU is supported rather
  than whether the CPU is not supported.

  As a result, the perf core will not schedule events on supported CPUs,
  resulting in a loss of events. Additionally, the perf core will
  attempt to schedule events on unsupported CPUs, but this will be
  rejected by armpmu_add(), which may result in a loss of events from
  other PMUs on those unsupported CPUs.

* If the arm_pmu does have an arm_pmu::filter() callback, and
  armpmu_filter() is called on a CPU which is not supported by the
  arm_pmu, armpmu_filter() will return false rather than true.

  As a result, the perf core will attempt to schedule events on
  unsupported CPUs, but this will be rejected by armpmu_add(), which may
  result in a loss of events from other PMUs on those unsupported CPUs.

This means a loss of events can be seen with any arm_pmu driver, but
with the ARMv8 PMUv3 driver (which is the only arm_pmu driver with an
arm_pmu::filter() callback) the event loss will be more limited and may
go unnoticed, which is how this issue evaded testing so far.

Fix the CPU filtering by performing this consistently in
armpmu_filter(), and remove the redundant arm_pmu::filter() callback and
armv8pmu_filter() implementation.

Commit bd2756811766 also silently removed the CHAIN event filtering from
armv8pmu_filter(), which will be addressed by a separate patch without
using the filter callback.

Fixes: bd2756811766 ("perf: Rewrite core context handling")
Reported-by: Janne Grunau <j@jannau.net>
Link: https://lore.kernel.org/asahi/20230215-arm_pmu_m1_regression-v1-1-f5a266577c8d@jannau.net/
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Asahi Lina <lina@asahilina.net>
Cc: Eric Curtin <ecurtin@redhat.com>
Tested-by: Janne Grunau <j@jannau.net>
Link: https://lore.kernel.org/r/20230216141240.3833272-2-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>

Merge tag 'net-6.2-final' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
"Fixes from the main networking tree only, probably because all
  sub-trees have backed off and haven't submitted their changes.

  None of the fixes here are particularly scary and no outstanding
  regressions. In an ideal world the "current release" sections would be
  empty at this stage but that never happens.

  Current release - regressions:

   - fix unwanted sign extension in netdev_stats_to_stats64()

  Current release - new code bugs:

   - initialize net->notrefcnt_tracker earlier

   - devlink: fix netdev notifier chain corruption

   - nfp: make sure mbox accesses in IPsec code are atomic

   - ice: fix check for weight and priority of a scheduling node

  Previous releases - regressions:

   - ice: xsk: fix cleaning of XDP_TX frame, prevent inf loop

   - igb: fix I2C bit banging config with external thermal sensor

  Previous releases - always broken:

   - sched: tcindex: update imperfect hash filters respecting rcu

   - mpls: fix stale pointer if allocation fails during device rename

   - dccp/tcp: avoid negative sk_forward_alloc by ipv6_pinfo.pktoptions

   - remove WARN_ON_ONCE(sk->sk_forward_alloc) from
     sk_stream_kill_queues()

   - af_key: fix heap information leak

   - ipv6: fix socket connection with DSCP (correct interpretation of
     the tclass field vs fib rule matching)

   - tipc: fix kernel warning when sending SYN message

   - vmxnet3: read RSS information from the correct descriptor (eop)"

* tag 'net-6.2-final' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (35 commits)
  devlink: Fix netdev notifier chain corruption
  igb: conditionalize I2C bit banging on external thermal sensor support
  net: mpls: fix stale pointer if allocation fails during device rename
  net/sched: tcindex: search key must be 16 bits
  tipc: fix kernel warning when sending SYN message
  igb: Fix PPS input and output using 3rd and 4th SDP
  net: use a bounce buffer for copying skb->mark
  ixgbe: add double of VLAN header when computing the max MTU
  i40e: add double of VLAN header when computing the max MTU
  ixgbe: allow to increase MTU to 3K with XDP enabled
  net: stmmac: Restrict warning on disabling DMA store and fwd mode
  net/sched: act_ctinfo: use percpu stats
  net: stmmac: fix order of dwmac5 FlexPPS parametrization sequence
  ice: fix lost multicast packets in promisc mode
  ice: Fix check for weight and priority of a scheduling node
  bnxt_en: Fix mqprio and XDP ring checking logic
  net: Fix unwanted sign extension in netdev_stats_to_stats64()
  net/usb: kalmia: Don't pass act_len in usb_bulk_msg error path
  net: openvswitch: fix possible memory leak in ovs_meter_cmd_set()
  af_key: Fix heap information leak
  ...

Merge tag 'block-6.2-2023-02-16' of git://git.kernel.dk/linux

Pull block fixes from Jens Axboe:
"Just a few NVMe fixes that should go into the 6.2 release, adding a
  quirk and fixing two issues introduced in this release:

   - NVMe fixes via Christoph:
       - Always return an ERR_PTR from nvme_pci_alloc_dev (Irvin Cote)
       - Add bogus ID quirk for ADATA SX6000PNP (Daniel Wagner)
       - Set the DMA mask earlier (Christoph Hellwig)"

* tag 'block-6.2-2023-02-16' of git://git.kernel.dk/linux:
  nvme-pci: always return an ERR_PTR from nvme_pci_alloc_dev
  nvme-pci: set the DMA mask earlier
  nvme-pci: add bogus ID quirk for ADATA SX6000PNP

Merge tag 'spi-v6.2-rc8-abi' of git://git./linux/kernel/git/broonie/spi

Pull spi fix from Mark Brown:
"One more last minute patch for v6.2 updating the parsing of the newly
  added spi-cs-setup-delay-ns.

  It's been pointed out that due to the way DT parsing works the change
  in property size is ABI visible so let's not let a release go out
  without it being fixed. The change got split from some earlier ABI
  related fixes to the property since the first version sent had a build
  error"

* tag 'spi-v6.2-rc8-abi' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: Use a 32-bit DT property for spi-cs-setup-delay-ns

Merge tag 'gpio-fixes-for-v6.2' of git://git./linux/kernel/git/brgl/linux

Pull gpio fixes from Bartosz Golaszewski:

- fix a potential Kconfig issue with gpio-mlxbf2 not selecting
   GPIOLIB_IRQCHIP

- another immutable irqchip conversion, this time for gpio-vf610

- fix a wakeup issue on Clevo NH5xAx

* tag 'gpio-fixes-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: mlxbf2: select GPIOLIB_IRQCHIP
  gpiolib: acpi: Add a ignore wakeup quirk for Clevo NH5xAx
  gpio: vf610: make irq_chip immutable
  gpiolib: acpi: remove redundant declaration

stop mainaining UUID

The uuid code is very low maintainance now that the major overhaul
has completed, and doesn't need it's own tree. All the recent work
has been done by Andy who'd like to stay on as a reviewer without an
explicit tree.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

orphan sysvfs

This code has been stale for years and I have no way to test it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kvm: initialize all of the kvm_debugregs structure before sending it to userspace

When calling the KVM_GET_DEBUGREGS ioctl, on some configurations, there
might be some unitialized portions of the kvm_debugregs structure that
could be copied to userspace. Prevent this as is done in the other kvm
ioctls, by setting the whole structure to 0 before copying anything into
it.

Bonus is that this reduces the lines of code as the explicit flag
setting and reserved space zeroing out can be removed.

Cc: Sean Christopherson <seanjc@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: <x86@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: stable <stable@kernel.org>
Reported-by: Xingyuan Mo <hdthky0@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Message-Id: <20230214103304.3689213-1-gregkh@linuxfoundation.org>
Tested-by: Xingyuan Mo <hdthky0@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

ASoC: SOF: Intel: hda-dai: fix possible stream_tag leak

The HDaudio stream allocation is done first, and in a second step the
LOSIDV parameter is programmed for the multi-link used by a codec.

This leads to a possible stream_tag leak, e.g. if a DisplayAudio link
is not used. This would happen when a non-Intel graphics card is used
and userspace unconditionally uses the Intel Display Audio PCMs without
checking if they are connected to a receiver with jack controls.

We should first check that there is a valid multi-link entry to
configure before allocating a stream_tag. This change aligns the
dma_assign and dma_cleanup phases.

Complements: b0cd60f3e9f5 ("ALSA/ASoC: hda: clarify bus_get_link() and bus_link_get() helpers")
Link: https://github.com/thesofproject/linux/issues/4151
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230216162340.19480-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Merge tag 'asoc-fix-v6.2-rc8' of https://git./linux/kernel/git/broonie/sound into for-linus

ASoC: Fix for v6.2

One non-urgent fix for v6.2, this could possibly wait till the
merge window.

Merge tag 'intel-gpio-v6.2-2' of git://git./linux/kernel/git/andy/linux-gpio-intel into gpio/for-current

intel-gpio for v6.2-2

* Ignore spurious wakeup by touchpad on Clevo NH5xAx
* Miscellaneous fix(es)

devlink: Fix netdev notifier chain corruption

Cited commit changed devlink to register its netdev notifier block on
the global netdev notifier chain instead of on the per network namespace
one.

However, when changing the network namespace of the devlink instance,
devlink still tries to unregister its notifier block from the chain of
the old namespace and register it on the chain of the new namespace.
This results in corruption of the notifier chains, as the same notifier
block is registered on two different chains: The global one and the per
network namespace one. In turn, this causes other problems such as the
inability to dismantle namespaces due to netdev reference count issues.

Fix by preventing devlink from moving its notifier block between
namespaces.

Reproducer:

# echo "10 1" > /sys/bus/netdevsim/new_device
# ip netns add test123
# devlink dev reload netdevsim/netdevsim10 netns test123
# ip netns del test123
[ 71.935619] unregister_netdevice: waiting for lo to become free. Usage count = 2
[ 71.938348] leaked reference.

Fixes: 565b4824c39f ("devlink: change port event netdev notifier from per-net to global")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230215073139.1360108-1-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

igb: conditionalize I2C bit banging on external thermal sensor support

Commit a97f8783a937 ("igb: unbreak I2C bit-banging on i350") introduced
code to change I2C settings to bit banging unconditionally.

However, this patch introduced a regression:  On an Intel S2600CWR
Server Board with three NICs:

- 1x dual-port copper
  Intel I350 Gigabit Network Connection [8086:1521] (rev 01)
  fw 1.63, 0x80000dda

- 2x quad-port SFP+ with copper SFP Avago ABCU-5700RZ
  Intel I350 Gigabit Fiber Network Connection [8086:1522] (rev 01)
  fw 1.52.0

the SFP NICs no longer get link at all.  Reverting commit a97f8783a937
or switching to the Intel out-of-tree driver both fix the problem.

Per the igb out-of-tree driver, I2C bit banging on i350 depends on
support for an external thermal sensor (ETS).  However, commit
a97f8783a937 added bit banging unconditionally.  Additionally, the
out-of-tree driver always calls init_thermal_sensor_thresh on probe,
while our driver only calls init_thermal_sensor_thresh only in
igb_reset(), and only if an ETS is present, ignoring the internal
thermal sensor.  The affected SFPs don't provide an ETS.  Per Intel,
the behaviour is a result of i350 firmware requirements.

This patch fixes the problem by aligning the behaviour to the
out-of-tree driver:

- split igb_init_i2c() into two functions:
  - igb_init_i2c() only performs the basic I2C initialization.
  - igb_set_i2c_bb() makes sure that E1000_CTRL_I2C_ENA is set
    and enables bit-banging.

- igb_probe() only calls igb_set_i2c_bb() if an ETS is present.

- igb_probe() calls init_thermal_sensor_thresh() unconditionally.

- igb_reset() aligns its behaviour to igb_probe(), i. e., call
  igb_set_i2c_bb() if an ETS is present and call
  init_thermal_sensor_thresh() unconditionally.

Fixes: a97f8783a937 ("igb: unbreak I2C bit-banging on i350")
Tested-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Co-developed-by: Jamie Bainbridge <jbainbri@redhat.com>
Signed-off-by: Jamie Bainbridge <jbainbri@redhat.com>
Signed-off-by: Corinna Vinschen <vinschen@redhat.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230214185549.1306522-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

drm/amd/display: Fail atomic_check early on normalize_zpos error

[Why]

drm_atomic_normalize_zpos() can return an error code when there's
modeset lock contention. This was being ignored.

[How]

Bail out of atomic check if normalize_zpos() returns an error.

Fixes: b261509952bc ("drm/amd/display: Fix double cursor on non-video RGB MPO")
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amd/amdgpu: fix warning during suspend

Freeing memory was warned during suspend.
Move the self test out of suspend.

Link: https://bugzilla.redhat.com/show_bug.cgi?id=2151825
Cc: jfalempe@redhat.com
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-and-tested-by: Evan Quan <evan.quan@amd.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x

Merge branch '10GbE' of git://git./linux/kernel/git/tnguy/net-queue

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2023-02-14 (ixgbe, i40e)

This series contains updates to ixgbe and i40e drivers.

Jason Xing corrects comparison of frame sizes for setting MTU with XDP on
ixgbe and adjusts frame size to account for a second VLAN header on ixgbe
and i40e.

* '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  ixgbe: add double of VLAN header when computing the max MTU
  i40e: add double of VLAN header when computing the max MTU
  ixgbe: allow to increase MTU to 3K with XDP enabled
====================

Link: https://lore.kernel.org/r/20230214185146.1305819-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'apparmor-v6.2-rc9' of git://git./linux/kernel/git/jj/linux-apparmor

Pull apparmor fix from John Johansen:
"Regression fix for getattr mediation of old policy"

* tag 'apparmor-v6.2-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
apparmor: Fix regression in compat permissions for getattr

Merge tag 'nvme-6.2-2023-02-15' of git://git.infradead.org/nvme into block-6.2

Pull NVMe fixes from Christoph:

"nvme fixes for Linux 6.2

- always return an ERR_PTR from nvme_pci_alloc_dev (Irvin Cote)
- add bogus ID quirk for ADATA SX6000PNP (Daniel Wagner)
- set the DMA mask earlier (Christoph Hellwig)"

* tag 'nvme-6.2-2023-02-15' of git://git.infradead.org/nvme:
  nvme-pci: always return an ERR_PTR from nvme_pci_alloc_dev
  nvme-pci: set the DMA mask earlier
  nvme-pci: add bogus ID quirk for ADATA SX6000PNP

Merge tag 'nfsd-6.2-6' of git://git./linux/kernel/git/cel/linux

Pull nfsd fix from Chuck Lever:

- Fix a teardown bug in the new nfs4_file hashtable

* tag 'nfsd-6.2-6' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: don't destroy global nfs4_file table in per-net shutdown

Merge tag 'trace-v6.2-rc7-2' of git://git./linux/kernel/git/trace/linux-trace

Pull tracing fixlet from Steven Rostedt:
"Make trace_define_field_ext() static.

  Just after the fix to TASK_COMM_LEN not converted to its value in
  trace_events was pulled, the kernel test robot reported that the
  helper function trace_define_field_ext() added to that change was only
  used in the file it was defined in but was not declared static.

  Make it a local function"

* tag 'trace-v6.2-rc7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing: Make trace_define_field_ext() static

apparmor: Fix regression in compat permissions for getattr

This fixes a regression in mediation of getattr when old policy built
under an older ABI is loaded and mapped to internal permissions.

The regression does not occur for all getattr permission requests,
only appearing if state zero is the final state in the permission
lookup. This is because despite the first state (index 0) being
guaranteed to not have permissions in both newer and older permission
formats, it may have to carry permissions that were not mediated as
part of an older policy. These backward compat permissions are
mapped here to avoid special casing the mediation code paths.

Since the mapping code already takes into account backwards compat
permission from older formats it can be applied to state 0 to fix
the regression.

Fixes: 408d53e923bd ("apparmor: compute file permissions on profile load")
Reported-by: Philip Meulengracht <the_meulengracht@hotmail.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>

gpio: mlxbf2: select GPIOLIB_IRQCHIP

This driver uncondictionally uses the GPIOLIB_IRQCHIP so
select it.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

gpiolib: acpi: Add a ignore wakeup quirk for Clevo NH5xAx

The commit 1796f808e4bb ("HID: i2c-hid: acpi: Stop setting wakeup_capable")
changed the policy such that I2C touchpads may be able to wake up the
system by default if the system is configured as such.

However for some devices there is a bug, that is causing the touchpad to
instantly wake up the device again once it gets deactivated. The root cause
is still under investigation (see Link tag).

To workaround this problem for the time being, introduce a quirk for this
model that will prevent the wakeup capability for being set for GPIO 16.

Fixes: 1796f808e4bb ("HID: i2c-hid: acpi: Stop setting wakeup_capable")
Link: https://lore.kernel.org/linux-acpi/20230210164636.628462-1-wse@tuxedocomputers.com/
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: <stable@vger.kernel.org> # v6.1+
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

gpio: vf610: make irq_chip immutable

Since recently, the kernel is nagging about mutable irq_chips:

"not an immutable chip, please consider fixing it!"

Drop the unneeded copy, flag it as IRQCHIP_IMMUTABLE, add the new
helper functions and call the appropriate gpiolib functions.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

gpiolib: acpi: remove redundant declaration

Remove acpi_device declaration, as it is no longer needed.

Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

perf/x86: Refuse to export capabilities for hybrid PMUs

Now that KVM disables vPMU support on hybrid CPUs, WARN and return zeros
if perf_get_x86_pmu_capability() is invoked on a hybrid CPU. The helper
doesn't provide an accurate accounting of the PMU capabilities for hybrid
CPUs and needs to be enhanced if KVM, or anything else outside of perf,
wants to act on the PMU capabilities.

Cc: stable@vger.kernel.org
Cc: Andrew Cooper <Andrew.Cooper3@citrix.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: https://lore.kernel.org/all/20220818181530.2355034-1-kan.liang@linux.intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230208204230.1360502-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86/pmu: Disable vPMU support on hybrid CPUs (host PMUs)

Disable KVM support for virtualizing PMUs on hosts with hybrid PMUs until
KVM gains a sane way to enumeration the hybrid vPMU to userspace and/or
gains a mechanism to let userspace opt-in to the dangers of exposing a
hybrid vPMU to KVM guests. Virtualizing a hybrid PMU, or at least part of
a hybrid PMU, is possible, but it requires careful, deliberate
configuration from userspace.

E.g. to expose full functionality, vCPUs need to be pinned to pCPUs to
prevent migrating a vCPU between a big core and a little core, userspace
must enumerate a reasonable topology to the guest, and guest CPUID must be
curated per vCPU to enumerate accurate vPMU capabilities.

The last point is especially problematic, as KVM doesn't control which
pCPU it runs on when enumerating KVM's vPMU capabilities to userspace,
i.e. userspace can't rely on KVM_GET_SUPPORTED_CPUID in it's current form.

Alternatively, userspace could enable vPMU support by enumerating the
set of features that are common and coherent across all cores, e.g. by
filtering PMU events and restricting guest capabilities. But again, that
requires userspace to take action far beyond reflecting KVM's supported
feature set into the guest.

For now, simply disable vPMU support on hybrid CPUs to avoid inducing
seemingly random #GPs in guests, and punt support for hybrid CPUs to a
future enabling effort.

Reported-by: Jianfeng Gao <jianfeng.gao@intel.com>
Cc: stable@vger.kernel.org
Cc: Andrew Cooper <Andrew.Cooper3@citrix.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: https://lore.kernel.org/all/20220818181530.2355034-1-kan.liang@linux.intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230208204230.1360502-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

sched/psi: Fix use-after-free in ep_remove_wait_queue()

If a non-root cgroup gets removed when there is a thread that registered
trigger and is polling on a pressure file within the cgroup, the polling
waitqueue gets freed in the following path:

do_rmdir
   cgroup_rmdir
     kernfs_drain_open_files
       cgroup_file_release
         cgroup_pressure_release
           psi_trigger_destroy

However, the polling thread still has a reference to the pressure file and
will access the freed waitqueue when the file is closed or upon exit:

fput
   ep_eventpoll_release
     ep_free
       ep_remove_wait_queue
         remove_wait_queue

This results in use-after-free as pasted below.

The fundamental problem here is that cgroup_file_release() (and
consequently waitqueue's lifetime) is not tied to the file's real lifetime.
Using wake_up_pollfree() here might be less than ideal, but it is in line
with the comment at commit 42288cb44c4b ("wait: add wake_up_pollfree()")
since the waitqueue's lifetime is not tied to file's one and can be
considered as another special case. While this would be fixable by somehow
making cgroup_file_release() be tied to the fput(), it would require
sizable refactoring at cgroups or higher layer which might be more
justifiable if we identify more cases like this.

  BUG: KASAN: use-after-free in _raw_spin_lock_irqsave+0x60/0xc0
  Write of size 4 at addr ffff88810e625328 by task a.out/4404

CPU: 19 PID: 4404 Comm: a.out Not tainted 6.2.0-rc6 #38
Hardware name: Amazon EC2 c5a.8xlarge/, BIOS 1.0 10/16/2017
Call Trace:
<TASK>
dump_stack_lvl+0x73/0xa0
print_report+0x16c/0x4e0
kasan_report+0xc3/0xf0
kasan_check_range+0x2d2/0x310
_raw_spin_lock_irqsave+0x60/0xc0
remove_wait_queue+0x1a/0xa0
ep_free+0x12c/0x170
ep_eventpoll_release+0x26/0x30
__fput+0x202/0x400
task_work_run+0x11d/0x170
do_exit+0x495/0x1130
do_group_exit+0x100/0x100
get_signal+0xd67/0xde0
arch_do_signal_or_restart+0x2a/0x2b0
exit_to_user_mode_prepare+0x94/0x100
syscall_exit_to_user_mode+0x20/0x40
do_syscall_64+0x52/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
</TASK>

Allocated by task 4404:

kasan_set_track+0x3d/0x60
__kasan_kmalloc+0x85/0x90
psi_trigger_create+0x113/0x3e0
pressure_write+0x146/0x2e0
cgroup_file_write+0x11c/0x250
kernfs_fop_write_iter+0x186/0x220
vfs_write+0x3d8/0x5c0
ksys_write+0x90/0x110
do_syscall_64+0x43/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd

Freed by task 4407:

kasan_set_track+0x3d/0x60
kasan_save_free_info+0x27/0x40
____kasan_slab_free+0x11d/0x170
slab_free_freelist_hook+0x87/0x150
__kmem_cache_free+0xcb/0x180
psi_trigger_destroy+0x2e8/0x310
cgroup_file_release+0x4f/0xb0
kernfs_drain_open_files+0x165/0x1f0
kernfs_drain+0x162/0x1a0
__kernfs_remove+0x1fb/0x310
kernfs_remove_by_name_ns+0x95/0xe0
cgroup_addrm_files+0x67f/0x700
cgroup_destroy_locked+0x283/0x3c0
cgroup_rmdir+0x29/0x100
kernfs_iop_rmdir+0xd1/0x140
vfs_rmdir+0xfe/0x240
do_rmdir+0x13d/0x280
__x64_sys_rmdir+0x2c/0x30
do_syscall_64+0x43/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd

Fixes: 0e94682b73bf ("psi: introduce psi monitor")
Signed-off-by: Munehisa Kamata <kamatam@amazon.com>
Signed-off-by: Mengchi Cheng <mengcc@amazon.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/lkml/20230106224859.4123476-1-kamatam@amazon.com/
Link: https://lore.kernel.org/r/20230214212705.4058045-1-kamatam@amazon.com

Documentation/hw-vuln: Fix rST warning

The following warning:

Documentation/admin-guide/hw-vuln/cross-thread-rsb.rst:92: ERROR: Unexpected indentation.

was introduced by commit 493a2c2d23ca. Fix it by placing everything in
the same paragraph and also use a monospace font.

Fixes: 493a2c2d23ca ("Documentation/hw-vuln: Add documentation for Cross-Thread Return Predictions")
Reported-by: Stephen Rothwell <sfr@canb@auug.org.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

net: mpls: fix stale pointer if allocation fails during device rename

lianhui reports that when MPLS fails to register the sysctl table
under new location (during device rename) the old pointers won't
get overwritten and may be freed again (double free).

Handle this gracefully. The best option would be unregistering
the MPLS from the device completely on failure, but unfortunately
mpls_ifdown() can fail. So failing fully is also unreliable.

Another option is to register the new table first then only
remove old one if the new one succeeds. That requires more
code, changes order of notifications and two tables may be
visible at the same time.

sysctl point is not used in the rest of the code - set to NULL
on failures and skip unregister if already NULL.

Reported-by: lianhui tang <bluetlh@gmail.com>
Fixes: 0fae3bf018d9 ("mpls: handle device renames for per-device sysctls")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/sched: tcindex: search key must be 16 bits

Syzkaller found an issue where a handle greater than 16 bits would trigger
a null-ptr-deref in the imperfect hash area update.

general protection fault, probably for non-canonical address
0xdffffc0000000015: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x00000000000000a8-0x00000000000000af]
CPU: 0 PID: 5070 Comm: syz-executor456 Not tainted
6.2.0-rc7-syzkaller-00112-gc68f345b7c42 #0
Hardware name: Google Google Compute Engine/Google Compute Engine,
BIOS Google 01/21/2023
RIP: 0010:tcindex_set_parms+0x1a6a/0x2990 net/sched/cls_tcindex.c:509
Code: 01 e9 e9 fe ff ff 4c 8b bd 28 fe ff ff e8 0e 57 7d f9 48 8d bb
a8 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c
02 00 0f 85 94 0c 00 00 48 8b 85 f8 fd ff ff 48 8b 9b a8 00
RSP: 0018:ffffc90003d3ef88 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000015 RSI: ffffffff8803a102 RDI: 00000000000000a8
RBP: ffffc90003d3f1d8 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000000 R12: ffff88801e2b10a8
R13: dffffc0000000000 R14: 0000000000030000 R15: ffff888017b3be00
FS: 00005555569af300(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000056041c6d2000 CR3: 000000002bfca000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
tcindex_change+0x1ea/0x320 net/sched/cls_tcindex.c:572
tc_new_tfilter+0x96e/0x2220 net/sched/cls_api.c:2155
rtnetlink_rcv_msg+0x959/0xca0 net/core/rtnetlink.c:6132
netlink_rcv_skb+0x165/0x440 net/netlink/af_netlink.c:2574
netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline]
netlink_unicast+0x547/0x7f0 net/netlink/af_netlink.c:1365
netlink_sendmsg+0x91b/0xe10 net/netlink/af_netlink.c:1942
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg+0xd3/0x120 net/socket.c:734
____sys_sendmsg+0x334/0x8c0 net/socket.c:2476
___sys_sendmsg+0x110/0x1b0 net/socket.c:2530
__sys_sendmmsg+0x18f/0x460 net/socket.c:2616
__do_sys_sendmmsg net/socket.c:2645 [inline]
__se_sys_sendmmsg net/socket.c:2642 [inline]
__x64_sys_sendmmsg+0x9d/0x100 net/socket.c:2642
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80

Fixes: ee059170b1f7 ("net/sched: tcindex: update imperfect hash filters respecting rcu")
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tipc: fix kernel warning when sending SYN message

When sending a SYN message, this kernel stack trace is observed:

...
[   13.396352] RIP: 0010:_copy_from_iter+0xb4/0x550
...
[   13.398494] Call Trace:
[   13.398630]  <TASK>
[   13.398630]  ? __alloc_skb+0xed/0x1a0
[   13.398630]  tipc_msg_build+0x12c/0x670 [tipc]
[   13.398630]  ? shmem_add_to_page_cache.isra.71+0x151/0x290
[   13.398630]  __tipc_sendmsg+0x2d1/0x710 [tipc]
[   13.398630]  ? tipc_connect+0x1d9/0x230 [tipc]
[   13.398630]  ? __local_bh_enable_ip+0x37/0x80
[   13.398630]  tipc_connect+0x1d9/0x230 [tipc]
[   13.398630]  ? __sys_connect+0x9f/0xd0
[   13.398630]  __sys_connect+0x9f/0xd0
[   13.398630]  ? preempt_count_add+0x4d/0xa0
[   13.398630]  ? fpregs_assert_state_consistent+0x22/0x50
[   13.398630]  __x64_sys_connect+0x16/0x20
[   13.398630]  do_syscall_64+0x42/0x90
[   13.398630]  entry_SYSCALL_64_after_hwframe+0x63/0xcd

It is because commit a41dad905e5a ("iov_iter: saner checks for attempt
to copy to/from iterator") has introduced sanity check for copying
from/to iov iterator. Lacking of copy direction from the iterator
viewpoint would lead to kernel stack trace like above.

This commit fixes this issue by initializing the iov iterator with
the correct copy direction when sending SYN or ACK without data.

Fixes: f25dcc7687d4 ("tipc: tipc ->sendmsg() conversion")
Reported-by: syzbot+d43608d061e8847ec9f3@syzkaller.appspotmail.com
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Link: https://lore.kernel.org/r/20230214012606.5804-1-tung.q.nguyen@dektech.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

igb: Fix PPS input and output using 3rd and 4th SDP

Fix handling of the tsync interrupt to compare the pin number with
IGB_N_SDP instead of IGB_N_EXTTS/IGB_N_PEROUT and fix the indexing to
the perout array.

Fixes: cf99c1dd7b77 ("igb: move PEROUT and EXTTS isr logic to separate functions")
Reported-by: Matt Corallo <ntp-lists@mattcorallo.com>
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230213185822.3960072-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch '100GbE' of git://git./linux/kernel/git/tnguy/net-queue

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2023-02-13 (ice)

This series contains updates to ice driver only.

Michal fixes check of scheduling node weight and priority to be done
against desired value, not current value.

Jesse adds setting of all multicast when adding promiscuous mode to
resolve traffic being lost due to filter settings.

* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: fix lost multicast packets in promisc mode
ice: Fix check for weight and priority of a scheduling node
====================

Link: https://lore.kernel.org/r/20230213185259.3959224-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: use a bounce buffer for copying skb->mark

syzbot found arm64 builds would crash in sock_recv_mark()
when CONFIG_HARDENED_USERCOPY=y

x86 and powerpc are not detecting the issue because
they define user_access_begin.
This will be handled in a different patch,
because a check_object_size() is missing.

Only data from skb->cb[] can be copied directly to/from user space,
as explained in commit 79a8a642bf05 ("net: Whitelist
the skbuff_head_cache "cb" field")

syzbot report was:
usercopy: Kernel memory exposure attempt detected from SLUB object 'skbuff_head_cache' (offset 168, size 4)!
------------[ cut here ]------------
kernel BUG at mm/usercopy.c:102 !
Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 4410 Comm: syz-executor533 Not tainted 6.2.0-rc7-syzkaller-17907-g2d3827b3f393 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/21/2023
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : usercopy_abort+0x90/0x94 mm/usercopy.c:90
lr : usercopy_abort+0x90/0x94 mm/usercopy.c:90
sp : ffff80000fb9b9a0
x29: ffff80000fb9b9b0 x28: ffff0000c6073400 x27: 0000000020001a00
x26: 0000000000000014 x25: ffff80000cf52000 x24: fffffc0000000000
x23: 05ffc00000000200 x22: fffffc000324bf80 x21: ffff0000c92fe1a8
x20: 0000000000000001 x19: 0000000000000004 x18: 0000000000000000
x17: 656a626f2042554c x16: ffff0000c6073dd0 x15: ffff80000dbd2118
x14: ffff0000c6073400 x13: 00000000ffffffff x12: ffff0000c6073400
x11: ff808000081bbb4c x10: 0000000000000000 x9 : 7b0572d7cc0ccf00
x8 : 7b0572d7cc0ccf00 x7 : ffff80000bf650d4 x6 : 0000000000000000
x5 : 0000000000000001 x4 : 0000000000000001 x3 : 0000000000000000
x2 : ffff0001fefbff08 x1 : 0000000100000000 x0 : 000000000000006c
Call trace:
usercopy_abort+0x90/0x94 mm/usercopy.c:90
__check_heap_object+0xa8/0x100 mm/slub.c:4761
check_heap_object mm/usercopy.c:196 [inline]
__check_object_size+0x208/0x6b8 mm/usercopy.c:251
check_object_size include/linux/thread_info.h:199 [inline]
__copy_to_user include/linux/uaccess.h:115 [inline]
put_cmsg+0x408/0x464 net/core/scm.c:238
sock_recv_mark net/socket.c:975 [inline]
__sock_recv_cmsgs+0x1fc/0x248 net/socket.c:984
sock_recv_cmsgs include/net/sock.h:2728 [inline]
packet_recvmsg+0x2d8/0x678 net/packet/af_packet.c:3482
____sys_recvmsg+0x110/0x3a0
___sys_recvmsg net/socket.c:2737 [inline]
__sys_recvmsg+0x194/0x210 net/socket.c:2767
__do_sys_recvmsg net/socket.c:2777 [inline]
__se_sys_recvmsg net/socket.c:2774 [inline]
__arm64_sys_recvmsg+0x2c/0x3c net/socket.c:2774
__invoke_syscall arch/arm64/kernel/syscall.c:38 [inline]
invoke_syscall+0x64/0x178 arch/arm64/kernel/syscall.c:52
el0_svc_common+0xbc/0x180 arch/arm64/kernel/syscall.c:142
do_el0_svc+0x48/0x110 arch/arm64/kernel/syscall.c:193
el0_svc+0x58/0x14c arch/arm64/kernel/entry-common.c:637
el0t_64_sync_handler+0x84/0xf0 arch/arm64/kernel/entry-common.c:655
el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591
Code: 91388800 aa0903e1 f90003e8 94e6d752 (d4210000)

Fixes: 6fd1d51cfa25 ("net: SO_RCVMARK socket option for SO_MARK with recvmsg()")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Erin MacNeil <lnx.erin@gmail.com>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Link: https://lore.kernel.org/r/20230213160059.3829741-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

drm/vmwgfx: Do not drop the reference to the handle too soon

v3: Fix vmw_user_bo_lookup which was also dropping the gem reference
before the kernel was done with buffer depending on userspace doing
the right thing. Same bug, different spot.

It is possible for userspace to predict the next buffer handle and
to destroy the buffer while it's still used by the kernel. Delay
dropping the internal reference on the buffers until kernel is done
with them.

Instead of immediately dropping the gem reference in vmw_user_bo_lookup
and vmw_gem_object_create_with_handle let the callers decide when they're
ready give the control back to userspace.

Also fixes the second usage of vmw_gem_object_create_with_handle in
vmwgfx_surface.c which wasn't grabbing an explicit reference
to the gem object which could have been destroyed by the userspace
on the owning surface at any point.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Fixes: 8afa13a0583f ("drm/vmwgfx: Implement DRIVER_GEM")
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230211050514.2431155-1-zack@kde.org
(cherry picked from commit 9ef8d83e8e25d5f1811b3a38eb1484f85f64296c)
Cc: <stable@vger.kernel.org> # v5.17+

drm/vmwgfx: Stop accessing buffer objects which failed init

ttm_bo_init_reserved on failure puts the buffer object back which
causes it to be deleted, but kfree was still being called on the same
buffer in vmw_bo_create leading to a double free.

After the double free the vmw_gem_object_create_with_handle was
setting the gem function objects before checking the return status
of vmw_bo_create leading to null pointer access.

Fix the entire path by relaying on ttm_bo_init_reserved to delete the
buffer objects on failure and making sure the return status is checked
before setting the gem function objects on the buffer object.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Fixes: 8afa13a0583f ("drm/vmwgfx: Implement DRIVER_GEM")
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230208180050.2093426-1-zack@kde.org
(cherry picked from commit 36d421e632e9a0e8375eaed0143551a34d81a7e3)
Cc: <stable@vger.kernel.org> # v5.17+

drm/i915/gen11: Wa_1408615072/Wa_1407596294 should be on GT list

The UNSLICE_UNIT_LEVEL_CLKGATE register programmed by this workaround
has 'BUS' style reset, indicating that it does not lose its value on
engine resets. Furthermore, this register is part of the GT forcewake
domain rather than the RENDER domain, so it should not be impacted by
RCS engine resets. As such, we should implement this on the GT
workaround list rather than an engine list.

Bspec: 19219
Fixes: 3551ff928744 ("drm/i915/gen11: Moving WAs to rcs_engine_wa_init()")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230201222831.608281-2-matthew.d.roper@intel.com
(cherry picked from commit 5f21dc07b52eb54a908e66f5d6e05a87bcb5b049)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

ixgbe: add double of VLAN header when computing the max MTU

Include the second VLAN HLEN into account when computing the maximum
MTU size as other drivers do.

Fixes: fabf1bce103a ("ixgbe: Prevent unsupported configurations with XDP")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

i40e: add double of VLAN header when computing the max MTU

Include the second VLAN HLEN into account when computing the maximum
MTU size as other drivers do.

Fixes: 0c8493d90b6b ("i40e: add XDP support for pass and drop actions")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

ixgbe: allow to increase MTU to 3K with XDP enabled

Recently I encountered one case where I cannot increase the MTU size
directly from 1500 to a much bigger value with XDP enabled if the
server is equipped with IXGBE card, which happened on thousands of
servers in production environment. After applying the current patch,
we can set the maximum MTU size to 3K.

This patch follows the behavior of changing MTU as i40e/ice does.

References:
[1] commit 23b44513c3e6 ("ice: allow 3k MTU for XDP")
[2] commit 0c8493d90b6b ("i40e: add XDP support for pass and drop actions")

Fixes: fabf1bce103a ("ixgbe: Prevent unsupported configurations with XDP")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Merge tag 'pm-6.2-rc9' of git://git./linux/kernel/git/rafael/linux-pm

Pull power management fix from Rafael Wysocki:
"Add a missing NULL pointer check to the cpufreq drver for Qualcomm
platforms (Manivannan Sadhasivam)"

* tag 'pm-6.2-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: qcom-hw: Add missing null pointer check

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull kvm fixes from Paolo Bonzini:
"Certain AMD processors are vulnerable to a cross-thread return address
  predictions bug. When running in SMT mode and one of the sibling
  threads transitions out of C0 state, the other thread gets access to
  twice as many entries in the RSB, but unfortunately the predictions of
  the now-halted logical processor are not purged. Therefore, the
  executing processor could speculatively execute from locations that
  the now-halted processor had trained the RSB on.

  The Spectre v2 mitigations cover the Linux kernel, as it fills the RSB
  when context switching to the idle thread. However, KVM allows a VMM
  to prevent exiting guest mode when transitioning out of C0 using the
  KVM_CAP_X86_DISABLE_EXITS capability can be used by a VMM to change
  this behavior. To mitigate the cross-thread return address predictions
  bug, a VMM must not be allowed to override the default behavior to
  intercept C0 transitions.

  These patches introduce a KVM module parameter that, if set, will
  prevent the user from disabling the HLT, MWAIT and CSTATE exits"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  Documentation/hw-vuln: Add documentation for Cross-Thread Return Predictions
  KVM: x86: Mitigate the cross-thread return address predictions bug
  x86/speculation: Identify processors vulnerable to SMT RSB predictions

ALSA: hda/realtek: Enable mute/micmute LEDs and speaker support for HP Laptops

On HP Laptops, requires the ALC245_FIXUP_CS35L41_SPI_2_HP_GPIO_LED quirk to
make its audio LEDs and speaker work.

Signed-off-by: Andy Chi <andy.chi@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230214140432.39654-1-andy.chi@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

cpufreq: qcom-hw: Add missing null pointer check

of_device_get_match_data() may return NULL, so add a check to prevent
potential null pointer dereference.

Issue reported by Qualcomm's internal static analysis tool.

Fixes: 4f7961706c63 ("cpufreq: qcom-hw: Move soc_data to struct qcom_cpufreq")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

ALSA: hda/realtek: fix mute/micmute LEDs don't work for a HP platform.

There is a HP platform needs ALC236_FIXUP_HP_GPIO_LED quirk to
make mic-mute/audio-mute working.

Signed-off-by: Andy Chi <andy.chi@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230214035853.31217-1-andy.chi@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

alarmtimer: Prevent starvation by small intervals and SIG_IGN

syzbot reported a RCU stall which is caused by setting up an alarmtimer
with a very small interval and ignoring the signal. The reproducer arms the
alarm timer with a relative expiry of 8ns and an interval of 9ns. Not a
problem per se, but that's an issue when the signal is ignored because then
the timer is immediately rearmed because there is no way to delay that
rearming to the signal delivery path.  See posix_timer_fn() and commit
58229a189942 ("posix-timers: Prevent softirq starvation by small intervals
and SIG_IGN") for details.

The reproducer does not set SIG_IGN explicitely, but it sets up the timers
signal with SIGCONT. That has the same effect as explicitely setting
SIG_IGN for a signal as SIGCONT is ignored if there is no handler set and
the task is not ptraced.

The log clearly shows that:

   [pid  5102] --- SIGCONT {si_signo=SIGCONT, si_code=SI_TIMER, si_timerid=0, si_overrun=316014, si_int=0, si_ptr=NULL} ---

It works because the tasks are traced and therefore the signal is queued so
the tracer can see it, which delays the restart of the timer to the signal
delivery path. But then the tracer is killed:

   [pid  5087] kill(-5102, SIGKILL <unfinished ...>
   ...
   ./strace-static-x86_64: Process 5107 detached

and after it's gone the stall can be observed:

   syzkaller login: [   79.439102][    C0] hrtimer: interrupt took 68471 ns
   [  184.460538][    C1] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
   ...
   [  184.658237][    C1] rcu: Stack dump where RCU GP kthread last ran:
   [  184.664574][    C1] Sending NMI from CPU 1 to CPUs 0:
   [  184.669821][    C0] NMI backtrace for cpu 0
   [  184.669831][    C0] CPU: 0 PID: 5108 Comm: syz-executor192 Not tainted 6.2.0-rc6-next-20230203-syzkaller #0
   ...
   [  184.670036][    C0] Call Trace:
   [  184.670041][    C0]  <IRQ>
   [  184.670045][    C0]  alarmtimer_fired+0x327/0x670

posix_timer_fn() prevents that by checking whether the interval for
timers which have the signal ignored is smaller than a jiffie and
artifically delay it by shifting the next expiry out by a jiffie. That's
accurate vs. the overrun accounting, but slightly inaccurate
vs. timer_gettimer(2).

The comment in that function says what needs to be done and there was a fix
available for the regular userspace induced SIG_IGN mechanism, but that did
not work due to the implicit ignore for SIGCONT and similar signals. This
needs to be worked on, but for now the only available workaround is to do
exactly what posix_timer_fn() does:

Increase the interval of self-rearming timers, which have their signal
ignored, to at least a jiffie.

Interestingly this has been fixed before via commit ff86bf0c65f1
("alarmtimer: Rate limit periodic intervals") already, but that fix got
lost in a later rework.

Reported-by: syzbot+b9564ba6e8e00694511b@syzkaller.appspotmail.com
Fixes: f2c45807d399 ("alarmtimer: Switch over to generic set/get/rearm routine")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87k00q1no2.ffs@tglx

x86/mtrr: Revert 90b926e68f50 ("x86/pat: Fix pat_x_mtrr_type() for MTRR disabled case")

Commit

90b926e68f50 ("x86/pat: Fix pat_x_mtrr_type() for MTRR disabled case")

broke the use case of running Xen dom0 kernels on machines with an
external disk enclosure attached via USB, see Link tag.

What this commit was originally fixing - SEV-SNP guests on Hyper-V - is
a more specialized situation which has other issues at the moment anyway
so reverting this now and addressing the issue properly later is the
prudent thing to do.

So revert it in time for the 6.2 proper release.

[ bp: Rewrite commit message. ]

Reported-by: Christian Kujau <lists@nerdbynature.de>
Tested-by: Christian Kujau <lists@nerdbynature.de>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/4fe9541e-4d4c-2b2a-f8c8-2d34a7284930@nerdbynature.de

net: stmmac: Restrict warning on disabling DMA store and fwd mode

When setting 'snps,force_thresh_dma_mode' DT property, the following
warning is always emitted, regardless the status of force_sf_dma_mode:

dwmac-starfive 10020000.ethernet: force_sf_dma_mode is ignored if force_thresh_dma_mode is set.

Do not print the rather misleading message when DMA store and forward
mode is already disabled.

Fixes: e2a240c7d3bc ("driver:net:stmmac: Disable DMA store and forward mode if platform data force_thresh_dma_mode is set.")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230210202126.877548-1-cristian.ciocaltea@collabora.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

nvme-pci: always return an ERR_PTR from nvme_pci_alloc_dev

Don't mix NULL and ERR_PTR returns.

Fixes: 2e87570be9d2 ("nvme-pci: factor out a nvme_pci_alloc_dev helper")
Signed-off-by: Irvin Cote <irvin.cote@insa-lyon.fr>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme-pci: set the DMA mask earlier

Set the DMA mask before calling dma_addressing_limited, which depends on it.

Note that this stop checking the return value of dma_set_mask_and_coherent
as this function can only fail for masks < 32-bit.

Fixes: 3f30a79c2e2c ("nvme-pci: set constant paramters in nvme_pci_alloc_ctrl")
Reported-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Michael Kelley <mikelley@microsoft.com>

net/sched: act_ctinfo: use percpu stats

The tc action act_ctinfo was using shared stats, fix it to use percpu stats
since bstats_update() must be called with locks or with a percpu pointer argument.

tdc results:
1..12
ok 1 c826 - Add ctinfo action with default setting
ok 2 0286 - Add ctinfo action with dscp
ok 3 4938 - Add ctinfo action with valid cpmark and zone
ok 4 7593 - Add ctinfo action with drop control
ok 5 2961 - Replace ctinfo action zone and action control
ok 6 e567 - Delete ctinfo action with valid index
ok 7 6a91 - Delete ctinfo action with invalid index
ok 8 5232 - List ctinfo actions
ok 9 7702 - Flush ctinfo actions
ok 10 3201 - Add ctinfo action with duplicate index
ok 11 8295 - Add ctinfo action with invalid index
ok 12 3964 - Replace ctinfo action with invalid goto_chain control

Fixes: 24ec483cec98 ("net: sched: Introduce act_ctinfo action")
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://lore.kernel.org/r/20230210200824.444856-1-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: stmmac: fix order of dwmac5 FlexPPS parametrization sequence

So far changing the period by just setting new period values while
running did not work.

The order as indicated by the publicly available reference manual of the i.MX8MP [1]
indicates a sequence:

* initiate the programming sequence
* set the values for PPS period and start time
* start the pulse train generation.

This is currently not used in dwmac5_flex_pps_config(), which instead does:

* initiate the programming sequence and immediately start the pulse train generation
* set the values for PPS period and start time

This caused the period values written not to take effect until the FlexPPS output was
disabled and re-enabled again.

This patch fix the order and allows the period to be set immediately.

[1] https://www.nxp.com/webapp/Download?colCode=IMX8MPRM

Fixes: 9a8a02c9d46d ("net: stmmac: Add Flexible PPS support")
Signed-off-by: Johannes Zink <j.zink@pengutronix.de>
Link: https://lore.kernel.org/r/20230210143937.3427483-1-j.zink@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ata: pata_octeon_cf: drop kernel-doc notation

Fix a slew of kernel-doc warnings in pata_octeon_cf.c by changing
all "/**" comments to "/*" since they are not in kernel-doc format.

Fixes: 3c929c6f5aa7 ("libata: New driver for OCTEON SOC Compact Flash interface (v7).")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/all/202302101722.5O56RClE-lkp@intel.com/
Cc: David Daney <ddaney@caviumnetworks.com>
Cc: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>

ata: ahci: Add Tiger Lake UP{3,4} AHCI controller

Mark the Tiger Lake UP{3,4} AHCI controller as "low_power". This enables
S0ix to work out of the box. Otherwise this isn't working unless the
user manually sets /sys/class/scsi_host/*/link_power_management_policy.

Intel lists a total of 4 SATA controller IDs in [1] for those mobile
PCHs. This commit just adds the "AHCI" variant since I only tested
those.

[1]: https://cdrdv2.intel.com/v1/dl/getContent/631119

Signed-off-by: Simon Gaiser <simon@invisiblethingslab.com>
CC: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>

ata: libata-core: Disable READ LOG DMA EXT for Samsung MZ7LH

Samsung MZ7LH drives are spewing messages like this in to dmesg with AMD
SATA controllers:

ata1.00: exception Emask 0x0 SAct 0x7e0000 SErr 0x0 action 0x6 frozen
ata1.00: failed command: SEND FPDMA QUEUED
ata1.00: cmd 64/01:88:00:00:00/00:00:00:00:00/a0 tag 17 ncq dma 512 out
res 40/00:01:01:4f:c2/00:00:00:00:00/00 Emask
0x4 (timeout)

Since this was seen previously with SSD 840 EVO drives in
https://bugzilla.kernel.org/show_bug.cgi?id=203475 let's add the same
fix for these drives as the EVOs have, since they likely have very
similar firmwares.

Signed-off-by: Patrick McLean <chutzpah@gentoo.org>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>

mmc: jz4740: Work around bug on JZ4760(B)

On JZ4760 and JZ4760B, SD cards fail to run if the maximum clock
rate is set to 50 MHz, even though the controller officially does
support it.

Until the actual bug is found and fixed, limit the maximum clock rate to
24 MHz.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230131210229.68129-1-paul@crapouillou.net
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: mmc_spi: fix error handling in mmc_spi_probe()

If mmc_add_host() fails, it doesn't need to call mmc_remove_host(),
or it will cause null-ptr-deref, because of deleting a not added
device in mmc_remove_host().

To fix this, goto label 'fail_glue_init', if mmc_add_host() fails,
and change the label 'fail_add_host' to 'fail_gpiod_request'.

Fixes: 15a0580ced08 ("mmc_spi host driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230131013835.3564011-1-yangyingliang@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: sdio: fix possible resource leaks in some error paths

If sdio_add_func() or sdio_init_func() fails, sdio_remove_func() can
not release the resources, because the sdio function is not presented
in these two cases, it won't call of_node_put() or put_device().

To fix these leaks, make sdio_func_present() only control whether
device_del() needs to be called or not, then always call of_node_put()
and put_device().

In error case in sdio_init_func(), the reference of 'card->dev' is
not get, to avoid redundant put in sdio_free_func_cis(), move the
get_device() to sdio_alloc_func() and put_device() to sdio_release_func(),
it can keep the get/put function be balanced.

Without this patch, while doing fault inject test, it can get the
following leak reports, after this fix, the leak is gone.

unreferenced object 0xffff888112514000 (size 2048):
  comm "kworker/3:2", pid 65, jiffies 4294741614 (age 124.774s)
  hex dump (first 32 bytes):
    00 e0 6f 12 81 88 ff ff 60 58 8d 06 81 88 ff ff  ..o.....`X......
    10 40 51 12 81 88 ff ff 10 40 51 12 81 88 ff ff  .@Q......@Q.....
  backtrace:
    [<000000009e5931da>] kmalloc_trace+0x21/0x110
    [<000000002f839ccb>] mmc_alloc_card+0x38/0xb0 [mmc_core]
    [<0000000004adcbf6>] mmc_sdio_init_card+0xde/0x170 [mmc_core]
    [<000000007538fea0>] mmc_attach_sdio+0xcb/0x1b0 [mmc_core]
    [<00000000d4fdeba7>] mmc_rescan+0x54a/0x640 [mmc_core]

unreferenced object 0xffff888112511000 (size 2048):
  comm "kworker/3:2", pid 65, jiffies 4294741623 (age 124.766s)
  hex dump (first 32 bytes):
    00 40 51 12 81 88 ff ff e0 58 8d 06 81 88 ff ff  .@Q......X......
    10 10 51 12 81 88 ff ff 10 10 51 12 81 88 ff ff  ..Q.......Q.....
  backtrace:
    [<000000009e5931da>] kmalloc_trace+0x21/0x110
    [<00000000fcbe706c>] sdio_alloc_func+0x35/0x100 [mmc_core]
    [<00000000c68f4b50>] mmc_attach_sdio.cold.18+0xb1/0x395 [mmc_core]
    [<00000000d4fdeba7>] mmc_rescan+0x54a/0x640 [mmc_core]

Fixes: 3d10a1ba0d37 ("sdio: fix reference counting in sdio_remove_func()")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230130125808.3471254-1-yangyingliang@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: meson-gx: fix SDIO mode if cap_sdio_irq isn't set

Some SDIO WiFi modules stopped working after SDIO interrupt mode
was added if cap_sdio_irq isn't set in device tree. This patch was
confirmed to fix the issue.

Fixes: 066ecde6d826 ("mmc: meson-gx: add SDIO interrupt support")
Reported-by: Geraldo Nascimento <geraldogabriel@gmail.com>
Tested-by: Geraldo Nascimento <geraldogabriel@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/816cba9f-ff92-31a2-60f0-aca542d1d13e@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Merge tag 'mm-hotfixes-stable-2023-02-13-13-50' of git://git./linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
"Twelve hotfixes, mostly against mm/.

  Five of these fixes are cc:stable"

* tag 'mm-hotfixes-stable-2023-02-13-13-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  of: reserved_mem: Have kmemleak ignore dynamically allocated reserved mem
  scripts/gdb: fix 'lx-current' for x86
  lib: parser: optimize match_NUMBER apis to use local array
  mm: shrinkers: fix deadlock in shrinker debugfs
  mm: hwpoison: support recovery from ksm_might_need_to_copy()
  kasan: fix Oops due to missing calls to kasan_arch_is_ready()
  revert "squashfs: harden sanity check in squashfs_read_xattr_id_table"
  fsdax: dax_unshare_iter() should return a valid length
  mm/gup: add folio to list when folio_isolate_lru() succeed
  aio: fix mremap after fork null-deref
  mailmap: add entry for Alexander Mikhalitsyn
  mm: extend max struct page size for kmsan

ice: fix lost multicast packets in promisc mode

There was a problem reported to us where the addition of a VF with an IPv6
address ending with a particular sequence would cause the parent device on
the PF to no longer be able to respond to neighbor discovery packets.

In this case, we had an ovs-bridge device living on top of a VLAN, which
was on top of a PF, and it would not be able to talk anymore (the neighbor
entry would expire and couldn't be restored).

The root cause of the issue is that if the PF is asked to be in IFF_PROMISC
mode (promiscuous mode) and it had an ipv6 address that needed the
33:33:ff:00:00:04 multicast address to work, then when the VF was added
with the need for the same multicast address, the VF would steal all the
traffic destined for that address.

The ice driver didn't auto-subscribe a request of IFF_PROMISC to the
"multicast replication from other port's traffic" meaning that it won't get
for instance, packets with an exact destination in the VF, as above.

The VF's IPv6 address, which adds a "perfect filter" for 33:33:ff:00:00:04,
results in no packets for that multicast address making it to the PF (which
is in promisc but NOT "multicast replication").

The fix is to enable "multicast promiscuous" whenever the driver is asked
to enable IFF_PROMISC, and make sure to disable it when appropriate.

Fixes: e94d44786693 ("ice: Implement filter sync, NDO operations and bump version")
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

ice: Fix check for weight and priority of a scheduling node

Currently checks for weight and priority ranges don't check incoming value
from the devlink. Instead it checks node current weight or priority. This
makes those checks useless.

Change range checks in ice_set_object_tx_priority() and
ice_set_object_tx_weight() to check against incoming priority an weight.

Fixes: 42c2eb6b1f43 ("ice: Implement devlink-rate API")
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>