linux-2.6-microblaze.git
5 years agoMerge tag 'drm-fixes-2019-05-24-1' of git://anongit.freedesktop.org/drm/drm
Linus Torvalds [Fri, 24 May 2019 16:12:46 +0000 (09:12 -0700)]
Merge tag 'drm-fixes-2019-05-24-1' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
 "Nothing too unusual here for rc2. Except the amdgpu DMCU firmware
  loading fix caused build breakage with a different set of Kconfig
  options. I've just reverted it for now until the AMD folks can rewrite
  it to avoid that problem.

  i915:
   - boosting fix
   - bump ready task fixes
   - GVT - reset fix, error return, TRTT handling fix

  amdgpu:
   - DMCU firmware loading fix
   - Polaris 10 pci id for kfd
   - picasso screen corruption fix
   - SR-IOV fixes
   - vega driver reload fixes
   - SMU locking fix
   - compute profile fix for kfd

  vmwgfx:
   - integer overflow fixes
   - dma sg fix

  sun4i:
   - HDMI phy fixes

  gma500:
   - LVDS detection fix

  panfrost:
   - devfreq selection fix"

* tag 'drm-fixes-2019-05-24-1' of git://anongit.freedesktop.org/drm/drm: (32 commits)
  Revert "drm/amd/display: Don't load DMCU for Raven 1"
  drm/panfrost: Select devfreq
  drm/gma500/cdv: Check vbt config bits when detecting lvds panels
  drm/vmwgfx: integer underflow in vmw_cmd_dx_set_shader() leading to an invalid read
  drm/vmwgfx: NULL pointer dereference from vmw_cmd_dx_view_define()
  drm/vmwgfx: Use the dma scatter-gather iterator to get dma addresses
  drm/vmwgfx: Fix compat mode shader operation
  drm/vmwgfx: Fix user space handle equal to zero
  drm/vmwgfx: Don't send drm sysfs hotplug events on initial master set
  drm/i915/gvt: Fix an error code in ppgtt_populate_spt_by_guest_entry()
  drm/i915/gvt: do not let TRTTE and 0x4dfc write passthrough to hardware
  drm/i915/gvt: add 0x4dfc to gen9 save-restore list
  drm/i915/gvt: Tiled Resources mmios are in-context mmios for gen9+
  drm/i915/gvt: use cmd to restore in-context mmios to hw for gen9 platform
  drm/i915/gvt: emit init breadcrumb for gvt request
  drm/amdkfd: Fix compute profile switching
  drm/amdgpu: skip fw pri bo alloc for SRIOV
  drm/amd/powerplay: fix locking in smu_feature_set_supported()
  drm/amdgpu/gmc9: set vram_width properly for SR-IOV
  drm/amdgpu/soc15: skip reset on init
  ...

5 years agoRevert "drm/amd/display: Don't load DMCU for Raven 1"
Dave Airlie [Fri, 24 May 2019 09:55:32 +0000 (19:55 +1000)]
Revert "drm/amd/display: Don't load DMCU for Raven 1"

This reverts commit 55143dc23ca4792868ea8c17bce65ca7b3d3e8c4.

This causes build breakags with some Kconfigs so revert for now.

Fixes: 55143dc23ca4 ("drm/amd/display: Don't load DMCU for Raven 1")

Signed-off-by: Dave Airlie <airlied@redhat.com>
5 years agoMerge tag 'drm-intel-fixes-2019-05-23' of git://anongit.freedesktop.org/drm/drm-intel...
Dave Airlie [Fri, 24 May 2019 04:01:00 +0000 (14:01 +1000)]
Merge tag 'drm-intel-fixes-2019-05-23' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- Fix boosting of new client to be non-preemptive
- Fix to actually bump ready tasks ahead of busywaits
- Includes gvt-fixes-2019-05-21

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190523094221.GA26026@jlahtine-desk.ger.corp.intel.com
5 years agoMerge tag 'xfs-5.2-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Linus Torvalds [Thu, 23 May 2019 18:18:18 +0000 (11:18 -0700)]
Merge tag 'xfs-5.2-fixes-1' of git://git./fs/xfs/xfs-linux

Pull xfs fix from Darrick Wong:
 "Fix an accounting mistake where we included the log space when
  calculating the reserve space for metadata expansion"

* tag 'xfs-5.2-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: don't reserve per-AG space for an internal log

5 years agoMerge tag 'docs-5.2-fixes' of git://git.lwn.net/linux
Linus Torvalds [Thu, 23 May 2019 15:13:07 +0000 (08:13 -0700)]
Merge tag 'docs-5.2-fixes' of git://git.lwn.net/linux

Pull documentation fixes from Jonathan Corbet:
 "A handful of fixes for a docs build problem, along with catching the
  spdxcheck.py script up with the current state of affairs"

* tag 'docs-5.2-fixes' of git://git.lwn.net/linux:
  Documentation: kdump: fix minor typo
  scripts/spdxcheck.py: Add dual license subdirectory
  scripts/spdxcheck.py: Fix path to deprecated licenses
  counter: fix Documentation build error due to incorrect source file name

5 years agoMerge branch 'drm-fixes-5.2' of git://people.freedesktop.org/~agd5f/linux into drm...
Dave Airlie [Thu, 23 May 2019 02:04:00 +0000 (12:04 +1000)]
Merge branch 'drm-fixes-5.2' of git://people.freedesktop.org/~agd5f/linux into drm-fixes

Fixes for 5.2:
- Fix for DMCU firmware issues for stable
- Add missing polaris10 pci id to kfd
- Screen corruption fix on picasso
- Fix for driver reload on vega10
- SR-IOV fixes
- Locking fix in new SMU code
- Compute profile switching fix for KFD

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190522205425.3657-1-alexander.deucher@amd.com
5 years agoMerge tag 'drm-misc-fixes-2019-05-22' of git://anongit.freedesktop.org/drm/drm-misc...
Dave Airlie [Thu, 23 May 2019 02:03:35 +0000 (12:03 +1000)]
Merge tag 'drm-misc-fixes-2019-05-22' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

- sun4i fixes to hdmi phy as well as u16 overflow in dsi (left from -next-fixes)
- gma500 fix to make lvds detection more reliable
- select devfreq for panfrost since it can't probe without it

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20190522194440.GA22359@art_vandelay
5 years agoMerge branch 'vmwgfx-fixes-5.2' of git://people.freedesktop.org/~thomash/linux into...
Dave Airlie [Thu, 23 May 2019 02:02:30 +0000 (12:02 +1000)]
Merge branch 'vmwgfx-fixes-5.2' of git://people.freedesktop.org/~thomash/linux into drm-fixes

A set of misc fixes for various issues that have surfaced recently.
All Cc'd stable except the dma iterator fix which shouldn't really cause
any real issues on older kernels.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: "Thomas Hellstrom (VMware)" <thomas@shipmail.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190522115408.33185-1-thomas@shipmail.org
5 years agodrm/panfrost: Select devfreq
Ezequiel Garcia [Fri, 17 May 2019 15:00:42 +0000 (12:00 -0300)]
drm/panfrost: Select devfreq

Currently, there is some logic for the driver to work without devfreq.
However, the driver actually fails to probe if !CONFIG_PM_DEVFREQ.

Fix this by selecting devfreq, and drop the additional checks
for devfreq.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190517150042.776-1-ezequiel@collabora.com
5 years agoMerge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Linus Torvalds [Wed, 22 May 2019 15:36:16 +0000 (08:36 -0700)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull arm64 fixes from Will Deacon:

 - Fix SPE probe failure when backing auxbuf with high-order pages

 - Fix handling of DMA allocations from outside of the vmalloc area

 - Fix generation of build-id ELF section for vDSO object

 - Disable huge I/O mappings if kernel page table dumping is enabled

 - A few other minor fixes (comments, kconfig etc)

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: vdso: Explicitly add build-id option
  arm64/mm: Inhibit huge-vmap with ptdump
  arm64: Print physical address of page table base in show_pte()
  arm64: don't trash config with compat symbol if COMPAT is disabled
  arm64: assembler: Update comment above cond_yield_neon() macro
  drivers/perf: arm_spe: Don't error on high-order pages for aux buf
  arm64/iommu: handle non-remapped addresses in ->mmap and ->get_sgtable

5 years agoMerge tag 'gfs2-5.1.fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2...
Linus Torvalds [Wed, 22 May 2019 15:31:09 +0000 (08:31 -0700)]
Merge tag 'gfs2-5.1.fixes2' of git://git./linux/kernel/git/gfs2/linux-gfs2

Pull gfs2 fix from Andreas Gruenbacher:
 "Fix a gfs2 sign extension bug introduced in v4.3"

* tag 'gfs2-5.1.fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: Fix sign extension bug in gfs2_update_stats

5 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Linus Torvalds [Wed, 22 May 2019 15:28:16 +0000 (08:28 -0700)]
Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:

 1) Clear up some recent tipc regressions because of registration
    ordering. Fix from Junwei Hu.

 2) tipc's TLV_SET() can read past the end of the supplied buffer during
    the copy. From Chris Packham.

 3) ptp example program doesn't match the kernel, from Richard Cochran.

 4) Outgoing message type fix in qrtr, from Bjorn Andersson.

 5) Flow control regression in stmmac, from Tan Tee Min.

 6) Fix inband autonegotiation in phylink, from Russell King.

 7) Fix sk_bound_dev_if handling in rawv6_bind(), from Mike Manning.

 8) Fix usbnet crash after disconnect, from Kloetzke Jan.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (21 commits)
  usbnet: fix kernel crash after disconnect
  selftests: fib_rule_tests: use pre-defined DEV_ADDR
  net-next: net: Fix typos in ip-sysctl.txt
  ipv6: Consider sk_bound_dev_if when binding a raw socket to an address
  net: phylink: ensure inband AN works correctly
  usbnet: ipheth: fix racing condition
  net: stmmac: dma channel control register need to be init first
  net: stmmac: fix ethtool flow control not able to get/set
  net: qrtr: Fix message type of outgoing packets
  networking: : fix typos in code comments
  ptp: Fix example program to match kernel.
  fddi: fix typos in code comments
  selftests: fib_rule_tests: enable forwarding before ipv4 from/iif test
  selftests: fib_rule_tests: fix local IPv4 address typo
  tipc: Avoid copying bytes beyond the supplied data
  2/2] net: xilinx_emaclite: use readx_poll_timeout() in mdio wait function
  1/2] net: axienet: use readx_poll_timeout() in mdio wait function
  vlan: Mark expected switch fall-through
  macvlan: Mark expected switch fall-through
  net/mlx4_en: ethtool, Remove unsupported SFP EEPROM high pages query
  ...

5 years agoMerge tag 'for-5.2/dm-fix-1' of git://git.kernel.org/pub/scm/linux/kernel/git/device...
Linus Torvalds [Wed, 22 May 2019 15:10:35 +0000 (08:10 -0700)]
Merge tag 'for-5.2/dm-fix-1' of git://git./linux/kernel/git/device-mapper/linux-dm

Pull device mapper fix from Mike Snitzer:
 "Fix a particularly glaring oversight in a DM core commit from 5.1 that
  doesn't properly trim special IOs (e.g. discards) relative to
  corresponding target's max_io_len_target_boundary()"

* tag 'for-5.2/dm-fix-1' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm: make sure to obey max_io_len_target_boundary

5 years agogfs2: Fix sign extension bug in gfs2_update_stats
Andreas Gruenbacher [Fri, 17 May 2019 18:18:43 +0000 (19:18 +0100)]
gfs2: Fix sign extension bug in gfs2_update_stats

Commit 4d207133e9c3 changed the types of the statistic values in struct
gfs2_lkstats from s64 to u64.  Because of that, what should be a signed
value in gfs2_update_stats turned into an unsigned value.  When shifted
right, we end up with a large positive value instead of a small negative
value, which results in an incorrect variance estimate.

Fixes: 4d207133e9c3 ("gfs2: Make statistics unsigned, suitable for use with do_div()")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Cc: stable@vger.kernel.org # v4.4+
5 years agodm: make sure to obey max_io_len_target_boundary
Michael Lass [Tue, 21 May 2019 19:58:07 +0000 (21:58 +0200)]
dm: make sure to obey max_io_len_target_boundary

Commit 61697a6abd24 ("dm: eliminate 'split_discard_bios' flag from DM
target interface") incorrectly removed code from
__send_changing_extent_only() that is required to impose a per-target IO
boundary on IO that exceeds max_io_len_target_boundary().  Otherwise
"special" IO (e.g. DISCARD, WRITE SAME, WRITE ZEROES) can write beyond
where allowed.

Fix this by restoring the max_io_len_target_boundary() limit in
__send_changing_extent_only()

Fixes: 61697a6abd24 ("dm: eliminate 'split_discard_bios' flag from DM target interface")
Cc: stable@vger.kernel.org # 5.1+
Signed-off-by: Michael Lass <bevan@bi-co.net>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
5 years agousbnet: fix kernel crash after disconnect
Kloetzke Jan [Tue, 21 May 2019 13:18:40 +0000 (13:18 +0000)]
usbnet: fix kernel crash after disconnect

When disconnecting cdc_ncm the kernel sporadically crashes shortly
after the disconnect:

  [   57.868812] Unable to handle kernel NULL pointer dereference at virtual address 00000000
  ...
  [   58.006653] PC is at 0x0
  [   58.009202] LR is at call_timer_fn+0xec/0x1b4
  [   58.013567] pc : [<0000000000000000>] lr : [<ffffff80080f5130>] pstate: 00000145
  [   58.020976] sp : ffffff8008003da0
  [   58.024295] x29: ffffff8008003da0 x28: 0000000000000001
  [   58.029618] x27: 000000000000000a x26: 0000000000000100
  [   58.034941] x25: 0000000000000000 x24: ffffff8008003e68
  [   58.040263] x23: 0000000000000000 x22: 0000000000000000
  [   58.045587] x21: 0000000000000000 x20: ffffffc68fac1808
  [   58.050910] x19: 0000000000000100 x18: 0000000000000000
  [   58.056232] x17: 0000007f885aff8c x16: 0000007f883a9f10
  [   58.061556] x15: 0000000000000001 x14: 000000000000006e
  [   58.066878] x13: 0000000000000000 x12: 00000000000000ba
  [   58.072201] x11: ffffffc69ff1db30 x10: 0000000000000020
  [   58.077524] x9 : 8000100008001000 x8 : 0000000000000001
  [   58.082847] x7 : 0000000000000800 x6 : ffffff8008003e70
  [   58.088169] x5 : ffffffc69ff17a28 x4 : 00000000ffff138b
  [   58.093492] x3 : 0000000000000000 x2 : 0000000000000000
  [   58.098814] x1 : 0000000000000000 x0 : 0000000000000000
  ...
  [   58.205800] [<          (null)>]           (null)
  [   58.210521] [<ffffff80080f5298>] expire_timers+0xa0/0x14c
  [   58.215937] [<ffffff80080f542c>] run_timer_softirq+0xe8/0x128
  [   58.221702] [<ffffff8008081120>] __do_softirq+0x298/0x348
  [   58.227118] [<ffffff80080a6304>] irq_exit+0x74/0xbc
  [   58.232009] [<ffffff80080e17dc>] __handle_domain_irq+0x78/0xac
  [   58.237857] [<ffffff8008080cf4>] gic_handle_irq+0x80/0xac
  ...

The crash happens roughly 125..130ms after the disconnect. This
correlates with the 'delay' timer that is started on certain USB tx/rx
errors in the URB completion handler.

The problem is a race of usbnet_stop() with usbnet_start_xmit(). In
usbnet_stop() we call usbnet_terminate_urbs() to cancel all URBs in
flight. This only makes sense if no new URBs are submitted
concurrently, though. But the usbnet_start_xmit() can run at the same
time on another CPU which almost unconditionally submits an URB. The
error callback of the new URB will then schedule the timer after it was
already stopped.

The fix adds a check if the tx queue is stopped after the tx list lock
has been taken. This should reliably prevent the submission of new URBs
while usbnet_terminate_urbs() does its job. The same thing is done on
the rx side even though it might be safe due to other flags that are
checked there.

Signed-off-by: Jan Klötzke <Jan.Kloetzke@preh.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoselftests: fib_rule_tests: use pre-defined DEV_ADDR
Hangbin Liu [Tue, 21 May 2019 06:40:47 +0000 (14:40 +0800)]
selftests: fib_rule_tests: use pre-defined DEV_ADDR

DEV_ADDR is defined but not used. Use it in address setting.
Do the same with IPv6 for consistency.

Reported-by: David Ahern <dsahern@gmail.com>
Fixes: fc82d93e57e3 ("selftests: fib_rule_tests: fix local IPv4 address typo")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet-next: net: Fix typos in ip-sysctl.txt
Masanari Iida [Tue, 21 May 2019 03:41:15 +0000 (12:41 +0900)]
net-next: net: Fix typos in ip-sysctl.txt

This patch fixes some spelling typos found in ip-sysctl.txt

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoipv6: Consider sk_bound_dev_if when binding a raw socket to an address
Mike Manning [Mon, 20 May 2019 18:57:17 +0000 (19:57 +0100)]
ipv6: Consider sk_bound_dev_if when binding a raw socket to an address

IPv6 does not consider if the socket is bound to a device when binding
to an address. The result is that a socket can be bound to eth0 and
then bound to the address of eth1. If the device is a VRF, the result
is that a socket can only be bound to an address in the default VRF.

Resolve by considering the device if sk_bound_dev_if is set.

Signed-off-by: Mike Manning <mmanning@vyatta.att-mail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: phylink: ensure inband AN works correctly
Russell King [Mon, 20 May 2019 15:07:20 +0000 (16:07 +0100)]
net: phylink: ensure inband AN works correctly

Do not update the link interface mode while the link is down to avoid
spurious link interface changes.

Always call mac_config if we have a PHY to propagate the pause mode
settings to the MAC.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agousbnet: ipheth: fix racing condition
Bernd Eckstein [Mon, 20 May 2019 15:31:09 +0000 (17:31 +0200)]
usbnet: ipheth: fix racing condition

Fix a racing condition in ipheth.c that can lead to slow performance.

Bug: In ipheth_tx(), netif_wake_queue() may be called on the callback
ipheth_sndbulk_callback(), _before_ netif_stop_queue() is called.
When this happens, the queue is stopped longer than it needs to be,
thus reducing network performance.

Fix: Move netif_stop_queue() in front of usb_submit_urb(). Now the order
is always correct. In case, usb_submit_urb() fails, the queue is woken up
again as callback will not fire.

Testing: This racing condition is usually not noticeable, as it has to
occur very frequently to slowdown the network. The callback from the USB
is usually triggered slow enough, so the situation does not appear.
However, on a Ubuntu Linux on VMWare Workstation, running on Windows 10,
the we loose the race quite often and the following speedup can be noticed:

Without this patch: Download:  4.10 Mbit/s, Upload:  4.01 Mbit/s
With this patch:    Download: 36.23 Mbit/s, Upload: 17.61 Mbit/s

Signed-off-by: Oliver Zweigle <Oliver.Zweigle@faro.com>
Signed-off-by: Bernd Eckstein <3ernd.Eckstein@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoMerge tag 'selinux-pr-20190521' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Tue, 21 May 2019 19:51:20 +0000 (12:51 -0700)]
Merge tag 'selinux-pr-20190521' of git://git./linux/kernel/git/pcmoore/selinux

Pull SELinux fix from Paul Moore:
 "One small SELinux patch to fix a problem when disconnecting a SCTP
  socket with connect(AF_UNSPEC)"

* tag 'selinux-pr-20190521' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: do not report error on connect(AF_UNSPEC)

5 years agoMerge tag 'spdx-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh...
Linus Torvalds [Tue, 21 May 2019 19:33:38 +0000 (12:33 -0700)]
Merge tag 'spdx-5.2-rc2' of git://git./linux/kernel/git/gregkh/driver-core

Pull SPDX update from Greg KH:
 "Here is a series of patches that add SPDX tags to different kernel
  files, based on two different things:

   - SPDX entries are added to a bunch of files that we missed a year
     ago that do not have any license information at all.

     These were either missed because the tool saw the MODULE_LICENSE()
     tag, or some EXPORT_SYMBOL tags, and got confused and thought the
     file had a real license, or the files have been added since the
     last big sweep, or they were Makefile/Kconfig files, which we
     didn't touch last time.

   - Add GPL-2.0-only or GPL-2.0-or-later tags to files where our scan
     tools can determine the license text in the file itself. Where this
     happens, the license text is removed, in order to cut down on the
     700+ different ways we have in the kernel today, in a quest to get
     rid of all of these.

  These patches have been out for review on the linux-spdx@vger mailing
  list, and while they were created by automatic tools, they were
  hand-verified by a bunch of different people, all whom names are on
  the patches are reviewers.

  The reason for these "large" patches is if we were to continue to
  progress at the current rate of change in the kernel, adding license
  tags to individual files in different subsystems, we would be finished
  in about 10 years at the earliest.

  There will be more series of these types of patches coming over the
  next few weeks as the tools and reviewers crunch through the more
  "odd" variants of how to say "GPLv2" that developers have come up with
  over the years, combined with other fun oddities (GPL + a BSD
  disclaimer?) that are being unearthed, with the goal for the whole
  kernel to be cleaned up.

  These diffstats are not small, 3840 files are touched, over 10k lines
  removed in just 24 patches"

* tag 'spdx-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (24 commits)
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 25
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 24
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 23
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 22
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 21
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 20
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 19
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 18
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 17
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 15
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 14
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 12
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 11
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 10
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 9
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 7
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 5
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 4
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 3
  ...

5 years agoMerge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Linus Torvalds [Tue, 21 May 2019 19:24:24 +0000 (12:24 -0700)]
Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6

Pull crypto fixes from Herbert Xu:

 - Two long-standing bugs in the powerpc assembly of vmx

 - Stack overrun caused by HASH_MAX_DESCSIZE being too small

 - Regression in caam

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: vmx - ghash: do nosimd fallback manually
  crypto: vmx - CTR: always increment IV as quadword
  crypto: hash - fix incorrect HASH_MAX_DESCSIZE
  crypto: caam - fix typo in i.MX6 devices list for errata

5 years agoDocumentation: kdump: fix minor typo
Cengiz Can [Tue, 14 May 2019 16:17:25 +0000 (19:17 +0300)]
Documentation: kdump: fix minor typo

kdump.txt had a minor typo.

Signed-off-by: Cengiz Can <cengizc@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
5 years agoscripts/spdxcheck.py: Add dual license subdirectory
Sven Eckelmann [Sat, 11 May 2019 20:19:17 +0000 (22:19 +0200)]
scripts/spdxcheck.py: Add dual license subdirectory

The licenses from the other directory were partially moved to the dual
directory in commit 8ea8814fcdcb ("LICENSES: Clearly mark dual license only
licenses"). checkpatch therefore rejected files like
drivers/staging/android/ashmem.h with

  WARNING: 'SPDX-License-Identifier: GPL-2.0 OR Apache-2.0 */' is not supported in LICENSES/...
  #1: FILE: drivers/staging/android/ashmem.h:1:
  +/* SPDX-License-Identifier: GPL-2.0 OR Apache-2.0 */

Fixes: 8ea8814fcdcb ("LICENSES: Clearly mark dual license only licenses")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
5 years agoMerge tag 'gvt-fixes-2019-05-21' of https://github.com/intel/gvt-linux into drm-intel...
Joonas Lahtinen [Tue, 21 May 2019 11:37:37 +0000 (14:37 +0300)]
Merge tag 'gvt-fixes-2019-05-21' of https://github.com/intel/gvt-linux into drm-intel-fixes

gvt-fixes-2019-05-21

- vGPU reset fix with sane init breadcrumb (Weinan)
- Fix TRTT handling to use context state (Yan)
- Fix one error return (Dan)

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
From: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190521062408.GH12913@zhen-hp.sh.intel.com
5 years agotreewide: Replace GPLv2 boilerplate/reference with SPDX - rule 25
Thomas Gleixner [Sun, 19 May 2019 13:51:55 +0000 (15:51 +0200)]
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 25

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it would be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 6 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154043.007767574@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agotreewide: Replace GPLv2 boilerplate/reference with SPDX - rule 24
Thomas Gleixner [Sun, 19 May 2019 13:51:54 +0000 (15:51 +0200)]
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 24

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or any
  later version this program is distributed in the hope that it will
  be useful but without any warranty without even the implied warranty
  of merchantability or fitness for a particular purpose see the gnu
  general public license for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 50 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154042.917228456@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agotreewide: Replace GPLv2 boilerplate/reference with SPDX - rule 23
Thomas Gleixner [Sun, 19 May 2019 13:51:53 +0000 (15:51 +0200)]
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 23

Based on 1 normalized pattern(s):

  this software may be redistributed and or modified under the terms
  of the gnu general public license as published by the free software
  foundation either version 2 of the license or any later version this
  program is distributed in the hope that it will be useful but
  without any warranty without even the implied warranty of
  merchantability or fitness for a particular purpose see the gnu
  general public license for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 2 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154042.800979546@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agotreewide: Replace GPLv2 boilerplate/reference with SPDX - rule 22
Thomas Gleixner [Sun, 19 May 2019 13:51:52 +0000 (15:51 +0200)]
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 22

Based on 1 normalized pattern(s):

  the code contained herein is licensed under the gnu general public
  license you may obtain a copy of the gnu general public license
  version 2 or later at the following locations

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 4 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154042.707528683@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agotreewide: Replace GPLv2 boilerplate/reference with SPDX - rule 21
Thomas Gleixner [Sun, 19 May 2019 13:51:51 +0000 (15:51 +0200)]
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 21

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details you
  should have received a copy of the gnu general public license along
  with this program if not write to the free software foundation

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 2 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154042.615184352@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agotreewide: Replace GPLv2 boilerplate/reference with SPDX - rule 20
Thomas Gleixner [Sun, 19 May 2019 13:51:50 +0000 (15:51 +0200)]
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 20

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details you
  should have received a copy of the gnu general public license along
  with this program see the file copying if not write to the free
  software foundation inc 51 franklin steet fifth floor boston ma
  02110 1301 usa

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 41 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154042.524645346@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agotreewide: Replace GPLv2 boilerplate/reference with SPDX - rule 19
Thomas Gleixner [Sun, 19 May 2019 13:51:49 +0000 (15:51 +0200)]
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 19

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details you
  should have received a copy of the gnu general public license along
  with this program if not write to the free software foundation 51
  franklin street fifth floor boston ma 02110 1301 usa

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 2 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154042.432790911@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agotreewide: Replace GPLv2 boilerplate/reference with SPDX - rule 18
Thomas Gleixner [Sun, 19 May 2019 13:51:48 +0000 (15:51 +0200)]
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 18

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 or at your option any
  later version this program is distributed in the hope that it will
  be useful but without any warranty without even the implied warranty
  of merchantability or fitness for a particular purpose see the gnu
  general public license for more details you should have received a
  copy of the gnu general public license along with this program see
  the file copying if not write to the free software foundation 675
  mass ave cambridge ma 02139 usa

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 52 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154042.342335923@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agotreewide: Replace GPLv2 boilerplate/reference with SPDX - rule 17
Thomas Gleixner [Sun, 19 May 2019 13:51:47 +0000 (15:51 +0200)]
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 17

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 or at your option any
  later version this program is distributed in the hope that it will
  be useful but without any warranty without even the implied warranty
  of merchantability or fitness for a particular purpose see the gnu
  general public license for more details you should have received a
  copy of the gnu general public license along with this program if
  not see http www gnu org licenses

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 13 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154042.236620792@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agotreewide: Replace GPLv2 boilerplate/reference with SPDX - rule 15
Thomas Gleixner [Sun, 19 May 2019 13:51:45 +0000 (15:51 +0200)]
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 15

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details you
  should have received a copy of the gnu general public license along
  with this program if not see http www gnu org licenses the full gnu
  general public license is included in this distribution in the file
  called copying

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 9 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154042.045106120@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agotreewide: Replace GPLv2 boilerplate/reference with SPDX - rule 14
Thomas Gleixner [Sun, 19 May 2019 13:51:44 +0000 (15:51 +0200)]
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 14

Based on 1 normalized pattern(s):

  gnu cc is free software you can redistribute it and or modify it
  under the terms of the gnu general public license as published by
  the free software foundation either version 2 or at your option any
  later version gnu cc is distributed in the hope that it will be
  useful but without any warranty without even the implied warranty of
  merchantability or fitness for a particular purpose see the gnu
  general public license for more details you should have received a
  copy of the gnu general public license along with gnu cc see the
  file copying if not write to the free software foundation 59 temple
  place suite 330 boston ma 02111 1307 usa

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154041.940713800@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agotreewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13
Thomas Gleixner [Sun, 19 May 2019 13:51:43 +0000 (15:51 +0200)]
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13

Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details you
  should have received a copy of the gnu general public license along
  with this program if not see http www gnu org licenses

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details [based]
  [from] [clk] [highbank] [c] you should have received a copy of the
  gnu general public license along with this program if not see http
  www gnu org licenses

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 355 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154041.837383322@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agotreewide: Replace GPLv2 boilerplate/reference with SPDX - rule 12
Thomas Gleixner [Sun, 19 May 2019 13:51:42 +0000 (15:51 +0200)]
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 12

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose good title or non infringement see the gnu general public
  license for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 7 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154041.727898173@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agotreewide: Replace GPLv2 boilerplate/reference with SPDX - rule 11
Thomas Gleixner [Sun, 19 May 2019 13:51:41 +0000 (15:51 +0200)]
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 11

Based on 1 normalized pattern(s):

  this program is free software you can distribute it and or modify it
  under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 1 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154041.622608495@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agotreewide: Replace GPLv2 boilerplate/reference with SPDX - rule 10
Thomas Gleixner [Sun, 19 May 2019 13:51:40 +0000 (15:51 +0200)]
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 10

Based on 1 normalized pattern(s):

  licensed under the fsf s gnu public license v2 or later

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 2 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154041.526489261@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agotreewide: Replace GPLv2 boilerplate/reference with SPDX - rule 9
Thomas Gleixner [Sun, 19 May 2019 13:51:39 +0000 (15:51 +0200)]
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 9

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details you
  should have received a copy of the gnu general public license along
  with this program if not you can access it online at http www gnu
  org licenses gpl 2 0 html

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 1 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154041.430943677@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agotreewide: Replace GPLv2 boilerplate/reference with SPDX - rule 7
Thomas Gleixner [Sun, 19 May 2019 13:51:37 +0000 (15:51 +0200)]
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 7

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details the full
  gnu general public license is included in this distribution in the
  file called copying

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 9 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154041.244154651@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agotreewide: Replace GPLv2 boilerplate/reference with SPDX - rule 5
Thomas Gleixner [Sun, 19 May 2019 13:51:35 +0000 (15:51 +0200)]
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 5

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details you
  should have received a copy of the gnu general public license along
  with this program if not see http www gnu org licenses the full gnu
  general public license is included in this distribution in the file
  called license

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154041.052102771@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agotreewide: Replace GPLv2 boilerplate/reference with SPDX - rule 4
Thomas Gleixner [Sun, 19 May 2019 13:51:34 +0000 (15:51 +0200)]
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 4

Based on 1 normalized pattern(s):

  licensed under gplv2 or later

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 118 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154040.961286471@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agotreewide: Replace GPLv2 boilerplate/reference with SPDX - rule 3
Thomas Gleixner [Sun, 19 May 2019 13:51:33 +0000 (15:51 +0200)]
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 3

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 or
  later as published by the free software foundation

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 9 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154040.848507137@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agotreewide: Replace GPLv2 boilerplate/reference with SPDX - rule 1
Thomas Gleixner [Sun, 19 May 2019 13:51:31 +0000 (15:51 +0200)]
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 1

Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details you
  should have received a copy of the gnu general public license along
  with this program if not write to the free software foundation inc
  51 franklin street fifth floor boston ma 02110 1301 usa

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option [no]_[pad]_[ctrl] any later version this program is
  distributed in the hope that it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details you should have received a copy of the gnu general
  public license along with this program if not write to the free
  software foundation inc 51 franklin street fifth floor boston ma
  02110 1301 usa

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 176 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154040.652910950@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agodrm/gma500/cdv: Check vbt config bits when detecting lvds panels
Patrik Jakobsson [Tue, 16 Apr 2019 11:46:07 +0000 (13:46 +0200)]
drm/gma500/cdv: Check vbt config bits when detecting lvds panels

Some machines have an lvds child device in vbt even though a panel is
not attached. To make detection more reliable we now also check the lvds
config bits available in the vbt.

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1665766
Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190416114607.1072-1-patrik.r.jakobsson@gmail.com
5 years agotreewide: Add SPDX license identifier - Makefile/Kconfig
Thomas Gleixner [Sun, 19 May 2019 12:07:45 +0000 (13:07 +0100)]
treewide: Add SPDX license identifier - Makefile/Kconfig

Add SPDX license identifiers to all Make/Kconfig files which:

 - Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agotreewide: Add SPDX license identifier for more missed files
Thomas Gleixner [Sun, 19 May 2019 12:08:20 +0000 (13:08 +0100)]
treewide: Add SPDX license identifier for more missed files

Add SPDX license identifiers to all files which:

 - Have no license information of any form

 - Have MODULE_LICENCE("GPL*") inside which was used in the initial
   scan/conversion to ignore the file

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agotreewide: Add SPDX license identifier for missed files
Thomas Gleixner [Sun, 19 May 2019 12:08:55 +0000 (13:08 +0100)]
treewide: Add SPDX license identifier for missed files

Add SPDX license identifiers to all files which:

 - Have no license information of any form

 - Have EXPORT_.*_SYMBOL_GPL inside which was used in the
   initial scan/conversion to ignore the file

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agodrm/vmwgfx: integer underflow in vmw_cmd_dx_set_shader() leading to an invalid read
Murray McAllister [Mon, 20 May 2019 09:57:34 +0000 (21:57 +1200)]
drm/vmwgfx: integer underflow in vmw_cmd_dx_set_shader() leading to an invalid read

If SVGA_3D_CMD_DX_SET_SHADER is called with a shader ID
of SVGA3D_INVALID_ID, and a shader type of
SVGA3D_SHADERTYPE_INVALID, the calculated binding.shader_slot
will be 4294967295, leading to an out-of-bounds read in vmw_binding_loc()
when the offset is calculated.

Cc: <stable@vger.kernel.org>
Fixes: d80efd5cb3de ("drm/vmwgfx: Initial DX support")
Signed-off-by: Murray McAllister <murray.mcallister@gmail.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
5 years agodrm/vmwgfx: NULL pointer dereference from vmw_cmd_dx_view_define()
Murray McAllister [Sat, 11 May 2019 06:01:37 +0000 (18:01 +1200)]
drm/vmwgfx: NULL pointer dereference from vmw_cmd_dx_view_define()

If SVGA_3D_CMD_DX_DEFINE_RENDERTARGET_VIEW is called with a surface
ID of SVGA3D_INVALID_ID, the srf struct will remain NULL after
vmw_cmd_res_check(), leading to a null pointer dereference in
vmw_view_add().

Cc: <stable@vger.kernel.org>
Fixes: d80efd5cb3de ("drm/vmwgfx: Initial DX support")
Signed-off-by: Murray McAllister <murray.mcallister@gmail.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
5 years agodrm/vmwgfx: Use the dma scatter-gather iterator to get dma addresses
Thomas Hellstrom [Wed, 15 May 2019 15:45:23 +0000 (17:45 +0200)]
drm/vmwgfx: Use the dma scatter-gather iterator to get dma addresses

Use struct sg_dma_page_iter in favour struct of sg_page_iter, which fairly
recently was declared useless for obtaining dma addresses.

With a struct sg_dma_page_iter we can't call sg_page_iter_page() so
when the page is needed, use the same page lookup mechanism as for the
non-sg dma modes instead of calling sg_dma_page_iter.

Note, the fixes tag doesn't really point to a commit introducing a
failure / regression, but rather to a commit that implemented a simple
workaround for this problem.

Cc: Jason Gunthorpe <jgg@mellanox.com>
Fixes: d901b2760dc6 ("lib/scatterlist: Provide a DMA page iterator")
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
5 years agodrm/vmwgfx: Fix compat mode shader operation
Thomas Hellstrom [Thu, 4 Apr 2019 13:25:43 +0000 (13:25 +0000)]
drm/vmwgfx: Fix compat mode shader operation

In compat mode, we allowed host-backed user-space with guest-backed
kernel / device. In this mode, set shader commands was broken since
no relocations were emitted. Fix this.

Cc: <stable@vger.kernel.org>
Fixes: e8c66efbfe3a ("drm/vmwgfx: Make user resource lookups reference-free during validation")
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
5 years agodrm/vmwgfx: Fix user space handle equal to zero
Thomas Hellstrom [Tue, 7 May 2019 09:10:10 +0000 (11:10 +0200)]
drm/vmwgfx: Fix user space handle equal to zero

User-space handles equal to zero are interpreted as uninitialized or
illegal by some drm systems (most notably kms). This means that a
dumb buffer or surface with a zero user-space handle can never be
used as a kms frame-buffer.

Cc: <stable@vger.kernel.org>
Fixes: c7eae62666ad ("drm/vmwgfx: Make the object handles idr-generated")
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
5 years agodrm/vmwgfx: Don't send drm sysfs hotplug events on initial master set
Thomas Hellstrom [Tue, 7 May 2019 09:07:53 +0000 (11:07 +0200)]
drm/vmwgfx: Don't send drm sysfs hotplug events on initial master set

This may confuse user-space clients like plymouth that opens a drm
file descriptor as a result of a hotplug event and then generates a
new event...

Cc: <stable@vger.kernel.org>
Fixes: 5ea1734827bb ("drm/vmwgfx: Send a hotplug event at master_set")
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
5 years agodrm/i915/gvt: Fix an error code in ppgtt_populate_spt_by_guest_entry()
Dan Carpenter [Mon, 13 May 2019 09:22:44 +0000 (12:22 +0300)]
drm/i915/gvt: Fix an error code in ppgtt_populate_spt_by_guest_entry()

"ret" is uninitialized on this path but it should be -EINVAL.

Fixes: 930c8dfea4b8 ("drm/i915/gvt: Check if get_next_pt_type() always returns a valid value")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
5 years agodrm/i915/gvt: do not let TRTTE and 0x4dfc write passthrough to hardware
Yan Zhao [Wed, 8 May 2019 02:16:44 +0000 (22:16 -0400)]
drm/i915/gvt: do not let TRTTE and 0x4dfc write passthrough to hardware

the vGPU write on TRTTE and 0x4dfc is now write to vreg first. their
values all be restored hardware when context switching.

Fixes: e39c5add3221 ("drm/i915/gvt: vGPU MMIO virtualization")
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
5 years agodrm/i915/gvt: add 0x4dfc to gen9 save-restore list
Yan Zhao [Wed, 8 May 2019 02:16:33 +0000 (22:16 -0400)]
drm/i915/gvt: add 0x4dfc to gen9 save-restore list

0x4dfc is in-context mmio for gen9+, but each vm have different settings
need to add it to save-restore list along with other trtt registers

Fixes: 178657139307 ("drm/i915/gvt: vGPU context switch")
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
5 years agodrm/i915/gvt: Tiled Resources mmios are in-context mmios for gen9+
Yan Zhao [Wed, 8 May 2019 02:15:00 +0000 (22:15 -0400)]
drm/i915/gvt: Tiled Resources mmios are in-context mmios for gen9+

TRVATTL3PTRDW(0x4de0-0x4de4), TRNULLDETCT(0x4de8), TRINVTILEDETCT(0x4dec),
TRTTE(0x4df0), TRVADR(0x4df4) are in-context mmios for gen9+

Fixes: 178657139307 ("drm/i915/gvt: vGPU context switch")
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
5 years agodrm/i915/gvt: use cmd to restore in-context mmios to hw for gen9 platform
Yan Zhao [Wed, 8 May 2019 02:14:04 +0000 (22:14 -0400)]
drm/i915/gvt: use cmd to restore in-context mmios to hw for gen9 platform

for restore-inhibit context, hardware will not load in-context mmios
(engine context part) to hardware, but hardware will save the mmio
values in hardware back to context image. So, in order to save correct
values of vGPU back to context image, values of vGPU mmios have to be
loaded into hardware first for restore-inhibit context.

In this patch, the mechanism is applied to all gen9 platform.

The reason excluding gen8 platforms is only because of lacking of testing
on those platforms.

v3: for mocs registers, goto in-context mmios save-restore path for skl
platform as well (weinan li)
v2: update vreg when scanning indirect context for inhibit context for
gen9

Cc: Weinan Li <weinan.z.li@intel.com>
Acked-by: Weinan Li <weinan.z.li@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
5 years agodrm/i915/gvt: emit init breadcrumb for gvt request
Weinan [Fri, 10 May 2019 07:57:20 +0000 (15:57 +0800)]
drm/i915/gvt: emit init breadcrumb for gvt request

"To track whether a request has started on HW, we can emit a breadcrumb at
the beginning of the request and check its timeline's HWSP to see if the
breadcrumb has advanced past the start of this request." It means all the
request which timeline's has_init_breadcrumb is true, then the
emit_init_breadcrumb process must have before emitting the real commands,
otherwise, the scheduler might get a wrong state of this request during
reset. If the request is exactly the guilty one, the scheduler won't
terminate it with the wrong state. To avoid this, do emit_init_breadcrumb
for all the requests from gvt.

v2: cc to stable kernel

Fixes: 8547444137ec ("drm/i915: Identify active requests")
Cc: stable@vger.kernel.org
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Weinan <weinan.z.li@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
5 years agodrm/amdkfd: Fix compute profile switching
Harish Kasiviswanathan [Fri, 25 Jan 2019 21:35:35 +0000 (16:35 -0500)]
drm/amdkfd: Fix compute profile switching

Fix compute profile switching on process termination.

Add a dedicated reference counter to keep track of entry/exit to/from
compute profile. This enables switching compute profiles for other
reasons than process creation or termination.

Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Eric Huang <JinhuiEric.Huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
5 years agoselinux: do not report error on connect(AF_UNSPEC)
Paolo Abeni [Fri, 10 May 2019 17:12:33 +0000 (19:12 +0200)]
selinux: do not report error on connect(AF_UNSPEC)

calling connect(AF_UNSPEC) on an already connected TCP socket is an
established way to disconnect() such socket. After commit 68741a8adab9
("selinux: Fix ltp test connect-syscall failure") it no longer works
and, in the above scenario connect() fails with EAFNOSUPPORT.

Fix the above explicitly early checking for AF_UNSPEC family, and
returning success in that case.

Reported-by: Tom Deseyn <tdeseyn@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 68741a8adab9 ("selinux: Fix ltp test connect-syscall failure")
Suggested-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
5 years agonet: stmmac: dma channel control register need to be init first
Weifeng Voon [Tue, 21 May 2019 05:38:38 +0000 (13:38 +0800)]
net: stmmac: dma channel control register need to be init first

stmmac_init_chan() needs to be called before stmmac_init_rx_chan() and
stmmac_init_tx_chan(). This is because if PBLx8 is to be used,
"DMA_CH(#i)_Control.PBLx8" needs to be set before programming
"DMA_CH(#i)_TX_Control.TxPBL" and "DMA_CH(#i)_RX_Control.RxPBL".

Fixes: 47f2a9ce527a ("net: stmmac: dma channel init prepared for multiple queues")
Reviewed-by: Zhang, Baoli <baoli.zhang@intel.com>
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Weifeng Voon <weifeng.voon@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: stmmac: fix ethtool flow control not able to get/set
Tan, Tee Min [Tue, 21 May 2019 04:55:42 +0000 (12:55 +0800)]
net: stmmac: fix ethtool flow control not able to get/set

Currently ethtool was not able to get/set the flow control due to a
missing "!". It will always return -EOPNOTSUPP even the device is
flow control supported.

This patch fixes the condition check for ethtool flow control get/set
function for ETHTOOL_LINK_MODE_Asym_Pause_BIT.

Fixes: 3c1bcc8614db (“net: ethernet: Convert phydev advertize and supported from u32 to link mode”)
Signed-off-by: Tan, Tee Min <tee.min.tan@intel.com>
Reviewed-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Voon, Weifeng <weifeng.voon@intel.com@intel.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: qrtr: Fix message type of outgoing packets
Bjorn Andersson [Mon, 20 May 2019 23:51:56 +0000 (16:51 -0700)]
net: qrtr: Fix message type of outgoing packets

QRTR packets has a message type in the header, which is repeated in the
control header. For control packets we therefor copy the type from
beginning of the outgoing payload and use that as message type.

For non-control messages an endianness fix introduced in v5.2-rc1 caused the
type to be 0, rather than QRTR_TYPE_DATA, causing all messages to be dropped by
the receiver. Fix this by converting and using qrtr_type, which will remain
QRTR_TYPE_DATA for non-control messages.

Fixes: 8f5e24514cbd ("net: qrtr: use protocol endiannes variable")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonetworking: : fix typos in code comments
Weitao Hou [Mon, 20 May 2019 05:23:17 +0000 (13:23 +0800)]
networking: : fix typos in code comments

fix accelleration to acceleration

Signed-off-by: Weitao Hou <houweitaoo@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoptp: Fix example program to match kernel.
Richard Cochran [Mon, 20 May 2019 05:15:05 +0000 (22:15 -0700)]
ptp: Fix example program to match kernel.

Ever since commit 3a06c7ac24f9 ("posix-clocks: Remove interval timer
facility and mmap/fasync callbacks") the possibility of PHC based
posix timers has been removed.  In addition it will probably never
make sense to implement this functionality.

This patch removes the misleading example code which seems to suggest
that posix timers for PHC devices will ever be a thing.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoMerge tag 'kbuild-fixes-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahi...
Linus Torvalds [Tue, 21 May 2019 00:22:17 +0000 (17:22 -0700)]
Merge tag 'kbuild-fixes-v5.2' of git://git./linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - remove unused cc-ldoption

 - do not check the name uniquness of builtin modules to avoid false
   positives

* tag 'kbuild-fixes-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: do not check name uniqueness of builtin modules
  kbuild: drop support for cc-ldoption

5 years agofddi: fix typos in code comments
Weitao Hou [Mon, 20 May 2019 04:49:38 +0000 (12:49 +0800)]
fddi: fix typos in code comments

fix abord to abort

Signed-off-by: Weitao Hou <houweitaoo@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoMerge branch 'kselftests-fib_rule_tests-fix'
David S. Miller [Tue, 21 May 2019 00:20:20 +0000 (20:20 -0400)]
Merge branch 'kselftests-fib_rule_tests-fix'

Hangbin Liu says:

====================
kselftests: fib_rule_tests: fix "from $SRC_IP iif $DEV" match testing

As all the IPv4 testing addresses are in the same subnet and egress device ==
ingress device, to pass "from $SRC_IP iif $DEV" match test, we need enable
forwarding to get the route entry.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoselftests: fib_rule_tests: enable forwarding before ipv4 from/iif test
Hangbin Liu [Mon, 20 May 2019 04:36:55 +0000 (12:36 +0800)]
selftests: fib_rule_tests: enable forwarding before ipv4 from/iif test

As all the testing addresses are in the same subnet and egress device ==
ingress device. We need enable forwarding to get the route entry.

Also disable rp_filer separately as some distributions enable it in
startup scripts.

Fixes: 65b2b4939a64 ("selftests: net: initial fib rule tests")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoselftests: fib_rule_tests: fix local IPv4 address typo
Hangbin Liu [Mon, 20 May 2019 04:36:54 +0000 (12:36 +0800)]
selftests: fib_rule_tests: fix local IPv4 address typo

The IPv4 testing address are all in 192.51.100.0 subnet. It doesn't make
sense to set a 198.51.100.1 local address. Should be a typo.

Fixes: 65b2b4939a64 ("selftests: net: initial fib rule tests")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agotipc: Avoid copying bytes beyond the supplied data
Chris Packham [Mon, 20 May 2019 03:45:36 +0000 (15:45 +1200)]
tipc: Avoid copying bytes beyond the supplied data

TLV_SET is called with a data pointer and a len parameter that tells us
how many bytes are pointed to by data. When invoking memcpy() we need
to careful to only copy len bytes.

Previously we would copy TLV_LENGTH(len) bytes which would copy an extra
4 bytes past the end of the data pointer which newer GCC versions
complain about.

 In file included from test.c:17:
 In function 'TLV_SET',
     inlined from 'test' at test.c:186:5:
 /usr/include/linux/tipc_config.h:317:3:
 warning: 'memcpy' forming offset [33, 36] is out of the bounds [0, 32]
 of object 'bearer_name' with type 'char[32]' [-Warray-bounds]
     memcpy(TLV_DATA(tlv_ptr), data, tlv_len);
     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 test.c: In function 'test':
 test.c::161:10: note:
 'bearer_name' declared here
     char bearer_name[TIPC_MAX_BEARER_NAME];
          ^~~~~~~~~~~

We still want to ensure any padding bytes at the end are initialised, do
this with a explicit memset() rather than copy bytes past the end of
data. Apply the same logic to TCM_SET.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoMerge branch 'net-readx_poll_timeout'
David S. Miller [Tue, 21 May 2019 00:00:47 +0000 (20:00 -0400)]
Merge branch 'net-readx_poll_timeout'

Benedikt Spranger says:

====================
Convert mdio wait function to use readx_poll_timeout()

On loaded systems with a preemptible kernel both functions
axienet_mdio_wait_until_ready() and xemaclite_mdio_wait() may report a
false positive error return.
Convert both functions to use readx_poll_timeout() to handle the
situation in a safe manner.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
5 years ago2/2] net: xilinx_emaclite: use readx_poll_timeout() in mdio wait function
Kurt Kanzenbach [Sun, 19 May 2019 17:59:37 +0000 (19:59 +0200)]
2/2] net: xilinx_emaclite: use readx_poll_timeout() in mdio wait function

On loaded systems with a preemptible kernel the mdio_wait() function may
report an error while everything is working fine:

xemaclite_mdio_wait():
  xemaclite_readl() -> chip not ready
  --> interrupt here (other work for some time / chip become ready)
  if (time_before_eq(end, jiffies))
    --> false positive error report

Replace the current code with readx_poll_timeout() which takes care
of the situation.

Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Benedikt Spranger <b.spranger@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years ago1/2] net: axienet: use readx_poll_timeout() in mdio wait function
Kurt Kanzenbach [Sun, 19 May 2019 17:59:36 +0000 (19:59 +0200)]
1/2] net: axienet: use readx_poll_timeout() in mdio wait function

On loaded systems with a preemptible kernel the mdio_wait() function may
report an error while everything is working fine:

axienet_mdio_wait_until_ready():
  axienet_ior() -> chip not ready
  --> interrupt here (other work for some time / chip become ready)
  if (time_before_eq(end, jiffies))
    --> false positive error report

Replace the current code with readx_poll_timeout() which take care
of the situation.

Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Benedikt Spranger <b.spranger@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agokbuild: do not check name uniqueness of builtin modules
Masahiro Yamada [Mon, 20 May 2019 02:54:37 +0000 (11:54 +0900)]
kbuild: do not check name uniqueness of builtin modules

I just thought it was a good idea to scan builtin.modules in the name
uniqueness checking, but a couple of false positives were found.

Stephen reported a false positive for ppc64_defconfig:

  warning: same basename if the following are built as modules:
    arch/powerpc/platforms/powermac/nvram.ko
    drivers/char/nvram.ko

The former is never built as a module as you see in
arch/powerpc/platforms/powermac/Makefile:

  # CONFIG_NVRAM is an arch. independent tristate symbol, for pmac32 we really
  # need this to be a bool.  Cheat here and pretend CONFIG_NVRAM=m is really
  # CONFIG_NVRAM=y
  obj-$(CONFIG_NVRAM:m=y)         += nvram.o

Another example of false positive is arm64 defconfig:

  warning: same basename if the following are built as modules:
    arch/arm64/lib/crc32.ko
    lib/crc32.ko

It is true CONFIG_CRC32 is a tristate option but it is always 'y' since
it is select'ed by ARM64. Hence, neither of them is built as a module
for the arm64 build.

From the above, modules.builtin essentially contains false positives.
I do not think it is a big deal as far as kmod is concerned, but false
positive warnings in the kernel build make people upset. It is better
to not check it.

Even without builtin.modules checked, we have enough (and more solid)
test coverage with allmodconfig.

While I touched this part, I replaced the sed code with neater one
provided by Stephen.

Link: https://lkml.org/lkml/2019/5/19/120
Link: https://lkml.org/lkml/2019/5/19/123
Fixes: 3a48a91901c5 ("kbuild: check uniqueness of module names")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoscripts/spdxcheck.py: Fix path to deprecated licenses
Sven Eckelmann [Sat, 11 May 2019 20:19:16 +0000 (22:19 +0200)]
scripts/spdxcheck.py: Fix path to deprecated licenses

The directory name for other licenses was changed to "deprecated" in
commit 62be257e986d ("LICENSES: Rename other to deprecated"). But it was
not changed for spdxcheck.py. As result, checkpatch failed with

  FAIL: "Blob or Tree named 'other' not found"
  Traceback (most recent call last):
    File "scripts/spdxcheck.py", line 240, in <module>
      spdx = read_spdxdata(repo)
    File "scripts/spdxcheck.py", line 41, in read_spdxdata
      for el in lictree[d].traverse():
    File "/usr/lib/python2.7/dist-packages/git/objects/tree.py", line 298, in __getitem__
      return self.join(item)
    File "/usr/lib/python2.7/dist-packages/git/objects/tree.py", line 244, in join
      raise KeyError(msg % file)
  KeyError: "Blob or Tree named 'other' not found"

Fixes: 62be257e986d ("LICENSES: Rename other to deprecated")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
5 years agocounter: fix Documentation build error due to incorrect source file name
Randy Dunlap [Sun, 19 May 2019 04:29:58 +0000 (21:29 -0700)]
counter: fix Documentation build error due to incorrect source file name

Fix kernel-doc build error in Documentation/driver-api/generic-counter.rst
of incorrect source file name.
Fixes this warning and error:

Error: Cannot open file ../drivers/counter/generic-counter.c
WARNING: kernel-doc '../scripts/kernel-doc -rst -enable-lineno -export ../drivers/counter/generic-counter.c' failed with return code 2

Fixes: 09e7d4ed8991 ("docs: Add Generic Counter interface documentation")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
5 years agovlan: Mark expected switch fall-through
Gustavo A. R. Silva [Mon, 20 May 2019 14:51:05 +0000 (09:51 -0500)]
vlan: Mark expected switch fall-through

In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.

This patch fixes the following warning:

net/8021q/vlan_dev.c: In function ‘vlan_dev_ioctl’:
net/8021q/vlan_dev.c:374:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
   if (!net_eq(dev_net(dev), &init_net))
      ^
net/8021q/vlan_dev.c:376:2: note: here
  case SIOCGMIIPHY:
  ^~~~

Warning level 3 was used: -Wimplicit-fallthrough=3

This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agomacvlan: Mark expected switch fall-through
Gustavo A. R. Silva [Mon, 20 May 2019 14:44:49 +0000 (09:44 -0500)]
macvlan: Mark expected switch fall-through

In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.

This patch fixes the following warning:

drivers/net/macvlan.c: In function ‘macvlan_do_ioctl’:
drivers/net/macvlan.c:839:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
   if (!net_eq(dev_net(dev), &init_net))
      ^
drivers/net/macvlan.c:841:2: note: here
  case SIOCGHWTSTAMP:
  ^~~~

Warning level 3 was used: -Wimplicit-fallthrough=3

This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet/mlx4_en: ethtool, Remove unsupported SFP EEPROM high pages query
Erez Alfasi [Mon, 20 May 2019 14:42:52 +0000 (17:42 +0300)]
net/mlx4_en: ethtool, Remove unsupported SFP EEPROM high pages query

Querying EEPROM high pages data for SFP module is currently
not supported by our driver but is still tried, resulting in
invalid FW queries.

Set the EEPROM ethtool data length to 256 for SFP module to
limit the reading for page 0 only and prevent invalid FW queries.

Fixes: 7202da8b7f71 ("ethtool, net/mlx4_en: Cable info, get_module_info/eeprom ethtool support")
Signed-off-by: Erez Alfasi <ereza@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoxfs: don't reserve per-AG space for an internal log
Darrick J. Wong [Mon, 20 May 2019 18:25:39 +0000 (11:25 -0700)]
xfs: don't reserve per-AG space for an internal log

It turns out that the log can consume nearly all the space in an AG, and
when this happens this it's possible that there will be less free space
in the AG than the reservation would try to hide.  On a debug kernel
this can trigger an ASSERT in xfs/250:

XFS: Assertion failed: xfs_perag_resv(pag, XFS_AG_RESV_METADATA)->ar_reserved + xfs_perag_resv(pag, XFS_AG_RESV_RMAPBT)->ar_reserved <= pag->pagf_freeblks + pag->pagf_flcount, file: fs/xfs/libxfs/xfs_ag_resv.c, line: 319

The log is permanently allocated, so we know we're never going to have
to expand the btrees to hold any records associated with the log space.
We therefore can treat the space as if it doesn't exist.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
5 years agodrm/amdgpu: skip fw pri bo alloc for SRIOV
Yintian Tao [Thu, 16 May 2019 05:07:26 +0000 (13:07 +0800)]
drm/amdgpu: skip fw pri bo alloc for SRIOV

PSP fw primary buffer is not used under SRIOV.
Under SRIOV, VBIOS or hypervisor driver will load psp
sos and psp sysdrv. Therefore, we don't need to
allocate memory for it.

v2: remove superfluous check for amdgpu_bo_free_kernel().

Signed-off-by: Yintian Tao <yttao@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
5 years agodrm/amd/powerplay: fix locking in smu_feature_set_supported()
Dan Carpenter [Wed, 15 May 2019 09:51:30 +0000 (12:51 +0300)]
drm/amd/powerplay: fix locking in smu_feature_set_supported()

There is a typo so the code unlocks twice instead of taking the lock and
then releasing it.

Fixes: f14a323db5b0 ("drm/amd/powerplay: implement update enabled feature state to smc for smu11")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
5 years agodrm/amdgpu/gmc9: set vram_width properly for SR-IOV
Alex Deucher [Fri, 17 May 2019 14:31:43 +0000 (09:31 -0500)]
drm/amdgpu/gmc9: set vram_width properly for SR-IOV

For SR-IOV, vram_width can't be read from ATOM as
RAVEN, and DF related registers is not readable, so hardcord
is the only way to set the correct vram_width.

Reviewed-by: Yintian Tao <yttao@amd.com>
Signed-off-by: Trigger Huang <Trigger.Huang@amd.com>
Signed-off-by: Yintian Tao <yttao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
5 years agodrm/amdgpu/soc15: skip reset on init
Alex Deucher [Fri, 17 May 2019 14:21:13 +0000 (09:21 -0500)]
drm/amdgpu/soc15: skip reset on init

Not necessary on soc15 and breaks driver reload on server cards.

Acked-by: Amber Lin <Amber.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
5 years agodrm/amdgpu: keep stolen memory on picasso
Flora Cui [Fri, 17 May 2019 03:33:56 +0000 (11:33 +0800)]
drm/amdgpu: keep stolen memory on picasso

otherwise screen corrupts during modprobe.

Signed-off-by: Flora Cui <flora.cui@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
5 years agotipc: fix modprobe tipc failed after switch order of device registration
Junwei Hu [Mon, 20 May 2019 06:43:59 +0000 (14:43 +0800)]
tipc: fix modprobe tipc failed after switch order of device registration

Error message printed:
modprobe: ERROR: could not insert 'tipc': Address family not
supported by protocol.
when modprobe tipc after the following patch: switch order of
device registration, commit 7e27e8d6130c
("tipc: switch order of device registration to fix a crash")

Because sock_create_kern(net, AF_TIPC, ...) called by
tipc_topsrv_create_listener() in the initialization process
of tipc_init_net(), so tipc_socket_init() must be execute before that.
Meanwhile, tipc_net_id need to be initialized when sock_create()
called, and tipc_socket_init() is no need to be called for each namespace.

I add a variable tipc_topsrv_net_ops, and split the
register_pernet_subsys() of tipc into two parts, and split
tipc_socket_init() with initialization of pernet params.

By the way, I fixed resources rollback error when tipc_bcast_init()
failed in tipc_init_net().

Fixes: 7e27e8d6130c ("tipc: switch order of device registration to fix a crash")
Signed-off-by: Junwei Hu <hujunwei4@huawei.com>
Reported-by: Wang Wang <wangwang2@huawei.com>
Reported-by: syzbot+1e8114b61079bfe9cbc5@syzkaller.appspotmail.com
Reviewed-by: Kang Zhou <zhoukang7@huawei.com>
Reviewed-by: Suanming Mou <mousuanming@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agodrm/amdkfd: Add missing Polaris10 ID
Kent Russell [Mon, 13 May 2019 13:00:05 +0000 (09:00 -0400)]
drm/amdkfd: Add missing Polaris10 ID

This was added to amdgpu but was missed in amdkfd

Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.rg
5 years agodrm/amd/display: Don't load DMCU for Raven 1
Harry Wentland [Mon, 29 Apr 2019 13:39:15 +0000 (09:39 -0400)]
drm/amd/display: Don't load DMCU for Raven 1

[WHY]
Some early Raven boards had a bad SBIOS that doesn't play nicely with
the DMCU FW. We thought the issues were fixed by ignoring errors on DMCU
load but that doesn't seem to be the case. We've still seen reports of
users unable to boot their systems at all.

[HOW]
Disable DMCU load on Raven 1. Only load it for Raven 2 and Picasso.

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
5 years agodrm/amd/display: Add ASICREV_IS_PICASSO
Harry Wentland [Tue, 14 May 2019 13:05:37 +0000 (09:05 -0400)]
drm/amd/display: Add ASICREV_IS_PICASSO

[WHY]
We only want to load DMCU FW on Picasso and Raven 2, not on Raven 1.

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
5 years agoMerge tag 'for-5.2-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave...
Linus Torvalds [Mon, 20 May 2019 16:52:35 +0000 (09:52 -0700)]
Merge tag 'for-5.2-rc1-tag' of git://git./linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:
 "Notable highlights:

   - fixes for some long-standing bugs in fsync that were quite hard to
     catch but now finaly fixed

   - some fixups to error handling paths that did not properly clean up
     (locking, memory)

   - fix to space reservation for inheriting properties"

* tag 'for-5.2-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  Btrfs: tree-checker: detect file extent items with overlapping ranges
  Btrfs: fix race between ranged fsync and writeback of adjacent ranges
  Btrfs: avoid fallback to transaction commit during fsync of files with holes
  btrfs: extent-tree: Fix a bug that btrfs is unable to add pinned bytes
  btrfs: sysfs: don't leak memory when failing add fsid
  btrfs: sysfs: Fix error path kobject memory leak
  Btrfs: do not abort transaction at btrfs_update_root() after failure to COW path
  btrfs: use the existing reserved items for our first prop for inheritance
  btrfs: don't double unlock on error in btrfs_punch_hole
  btrfs: Check the compression level before getting a workspace

5 years agodrm/i915: Truly bump ready tasks ahead of busywaits
Chris Wilson [Wed, 15 May 2019 13:00:49 +0000 (14:00 +0100)]
drm/i915: Truly bump ready tasks ahead of busywaits

In commit b7404c7ecb38 ("drm/i915: Bump ready tasks ahead of
busywaits"), I tried cutting a corner in order to not install a signal
for each of our dependencies, and only listened to requests on which we
were intending to busywait. The compromise that was made was that
instead of then being able to promote the request with a full
NOSEMAPHORE like its non-busywaiting brethren, as we had not ensured we
had cleared the semaphore chain, we settled for only using the NEWCLIENT
boost. With an over saturated system with multiple NEWCLIENTS in flight
at any time, this was found to be an inadequate promotion and left us
with a much poorer scheduling order than prior to using semaphores.

The outcome of this patch, is that all requests have NOSEMAPHORE
priority when they have no dependencies and are ready to run and not
busywait, restoring the pre-semaphore ordering on saturated systems.

We can demonstrate the effect of poor scheduling order by oversaturating
the system using gem_wsim on a system with multiple vcs engines
(i.e running the same workloads across more clients than required for
peak throughput, e.g. media_load_balance_17i7.wsim -c4 -b context):

x v5.1 (normalized)
+ tip
* fix
+------------------------------------------------------------------------+
|                                                                    x   |
|                                                                    x   |
|                                                                    x   |
|                                                                    x   |
|                                                                   %x   |
|                                                                  %%x   |
|                                                                  %%x   |
|                                                                  %%x   |
|                                                                  %%x   |
|                                                                  %%x   |
|                                                                  %%x   |
|                                                                  %%x   |
|                                                                  %%x   |
|                                                                  %%x   |
|                                                                  %%x   |
|                                                                  %#x   |
|                                                                  %#x   |
|                                                                  %#x   |
|                                                                  %#x   |
|                                                                  %#x   |
|         +                                                        %#xx  |
|         +                                                        %#xx  |
|         +                                                       %%#xx  |
|         +                                                       %%#xx  |
|         +                                                       %%#xx  |
|         +                                                       %%#xx  |
|         +                                                       %%##x  |
|         +++                                                     %%##x  |
|         +++                                                     %%##x  |
|         +++                                                     %%##x  |
|        ++++                                                     %%##x  |
|        ++++                                                     %%##x  |
|        ++++                                                     %%##xx |
|        ++++                                                     %###xx |
|        ++++                                                     %###xx |
|        ++++                                                     %###xx |
|        ++++                                                     %###xx |
|        ++++ +                                                   %#O#xx |
|        ++++ +                                                   %#O#xx |
|        ++++++ +                                                 %#O#xx |
|       ++++++++++                                                %OOOxxx|
|       ++++++++++       +                                       %#OOO#xx|
|     + ++++++++++++ ++ +++++    +                        ++    @@OOOO#xx|
|                                                                   |A_| |
||__________M_______A____________________|                               |
|                                                                 |A_|   |
+------------------------------------------------------------------------+
    N           Min           Max        Median           Avg        Stddev
x 120       0.99456       1.00628      0.999985     1.0001545  0.0024387139
+ 120      0.873021       1.00037      0.884134    0.90148752   0.039190862
Difference at 99.5% confidence
-0.098667 +/- 0.0110762
-9.86517% +/- 1.10745%
(Student's t, pooled s = 0.0277657)
% 120      0.990207       1.00165     0.9970265    0.99699748     0.0021024
Difference at 99.5% confidence
-0.003157 +/- 0.000908245
-0.315651% +/- 0.0908105%
(Student's t, pooled s = 0.00227678)

Fixes: b7404c7ecb38 ("drm/i915: Bump ready tasks ahead of busywaits")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Cc: Dmitry Ermilov <dmitry.ermilov@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190515130052.4475-2-chris@chris-wilson.co.uk
(cherry picked from commit 17db337f5098d29415314c4a588b842fc684394b)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
5 years agodrm/i915: Downgrade NEWCLIENT to non-preemptive
Chris Wilson [Wed, 15 May 2019 13:00:51 +0000 (14:00 +0100)]
drm/i915: Downgrade NEWCLIENT to non-preemptive

Commit 1413b2bc0717 ("drm/i915: Trim NEWCLIENT boosting") had the
intended consequence of not allowing a sequence of work that merely
crossed into a new engine the privilege to be promoted to NEWCLIENT
status. It also had the unintended consequence of actually making
NEWCLIENT effective on heavily oversubscribed transcode machines and
impacting upon their throughput.

If we consider a client packet composed of (rcsA, rcsB, vcs) and 30 of
those clients, using the NEWCLIENT boost that will be scheduled as

rcsA x 30, (rcsB, vcs) x 30

where as before it would have been

(rcsA, rcsB, vcs) x 30

That is with NEWCLIENT only boosting the first request of each client,
we would execute all rcsA requests prior to running on the vcs engines;
acruing a lot of dead time as compared to the previous case where the
vcs engine would be started in parallel to processing the second client.

The previous patch has the effect of delaying submission until it is
required by a third party (either the user with an explicit wait, or by
another client/engine). We reduce the NEWCLIENT bump to a mere WAIT,
which has the effect of removing its preemptive grant and reducing it to
the same level as any other user interaction -- that it will not be
promoted above the interengine dependencies, and so preventing NEWCLIENTS
from starving other engines. This a large nerf to the rrul properties of
the current NEWCLIENT, but it still does give prioritised submission to
new requests from light workloads.

References: b16c765122f9 ("drm/i915: Priority boost for new clients")
Fixes: 1413b2bc0717 ("drm/i915: Trim NEWCLIENT boosting") # customer impact
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Cc: Dmitry Ermilov <dmitry.ermilov@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190515130052.4475-4-chris@chris-wilson.co.uk
(cherry picked from commit 68fc728b01fcc93b26d52f6e884e738962a49a66)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
5 years agodrm/i915: Bump signaler priority on adding a waiter
Chris Wilson [Wed, 15 May 2019 13:00:50 +0000 (14:00 +0100)]
drm/i915: Bump signaler priority on adding a waiter

The handling of the no-preemption priority level imposes the restriction
that we need to maintain the implied ordering even though preemption is
disabled. Otherwise we may end up with an AB-BA deadlock across multiple
engine due to a real preemption event reordering the no-preemption
WAITs. To resolve this issue we currently promote all requests to WAIT
on unsubmission, however this interferes with the timeslicing
requirement that we do not apply any implicit promotion that will defeat
the round-robin timeslice list. (If we automatically promote the active
request it will go back to the head of the queue and not the tail!)

So we need implicit promotion to prevent reordering around semaphores
where we are not allowed to preempt, and we must avoid implicit
promotion on unsubmission. So instead of at unsubmit, if we apply that
implicit promotion on adding the dependency, we avoid the semaphore
deadlock and we also reduce the gains made by the promotion for user
space waiting. Furthermore, by keeping the earlier dependencies at a
higher level, we reduce the search space for timeslicing without
altering runtime scheduling too badly (no dependencies at all will be
assigned a higher priority for rrul).

v2: Limit the bump to external edges (as originally intended) i.e.
between contexts and out to the user.

Testcase: igt/gem_concurrent_blit
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190515130052.4475-3-chris@chris-wilson.co.uk
(cherry picked from commit 6e7eb7a80769e7250e31652b96918cf7f3e0d285)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>