Mel Gorman [Mon, 7 Oct 2013 10:28:50 +0000 (11:28 +0100)]
mm: numa: Do not migrate or account for hinting faults on the zero page
The zero page is not replicated between nodes and is often shared between
processes. The data is read-only and likely to be cached in local CPUs
if heavily accessed meaning that the remote memory access cost is less
of a concern. This patch prevents trapping faults on the zero pages. For
tasks using the zero page this will reduce the number of PTE updates,
TLB flushes and hinting faults.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
[ Correct use of is_huge_zero_page]
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1381141781-10992-13-git-send-email-mgorman@suse.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Mel Gorman [Mon, 7 Oct 2013 10:28:49 +0000 (11:28 +0100)]
mm: Only flush TLBs if a transhuge PMD is modified for NUMA pte scanning
NUMA PTE scanning is expensive both in terms of the scanning itself and
the TLB flush if there are any updates. The TLB flush is avoided if no
PTEs are updated but there is a bug where transhuge PMDs are considered
to be updated even if they were already pmd_numa. This patch addresses
the problem and TLB flushes should be reduced.
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1381141781-10992-12-git-send-email-mgorman@suse.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Mel Gorman [Mon, 7 Oct 2013 10:28:48 +0000 (11:28 +0100)]
mm: Do not flush TLB during protection change if !pte_present && !migration_entry
NUMA PTE scanning is expensive both in terms of the scanning itself and
the TLB flush if there are any updates. Currently non-present PTEs are
accounted for as an update and incurring a TLB flush where it is only
necessary for anonymous migration entries. This patch addresses the
problem and should reduce TLB flushes.
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1381141781-10992-11-git-send-email-mgorman@suse.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Mel Gorman [Mon, 7 Oct 2013 10:28:47 +0000 (11:28 +0100)]
mm: Account for a THP NUMA hinting update as one PTE update
A THP PMD update is accounted for as 512 pages updated in vmstat. This is
large difference when estimating the cost of automatic NUMA balancing and
can be misleading when comparing results that had collapsed versus split
THP. This patch addresses the accounting issue.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1381141781-10992-10-git-send-email-mgorman@suse.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Mel Gorman [Mon, 7 Oct 2013 10:28:46 +0000 (11:28 +0100)]
mm: Close races between THP migration and PMD numa clearing
THP migration uses the page lock to guard against parallel allocations
but there are cases like this still open
Task A Task B
--------------------- ---------------------
do_huge_pmd_numa_page do_huge_pmd_numa_page
lock_page
mpol_misplaced == -1
unlock_page
goto clear_pmdnuma
lock_page
mpol_misplaced == 2
migrate_misplaced_transhuge
pmd = pmd_mknonnuma
set_pmd_at
During hours of testing, one crashed with weird errors and while I have
no direct evidence, I suspect something like the race above happened.
This patch extends the page lock to being held until the pmd_numa is
cleared to prevent migration starting in parallel while the pmd_numa is
being cleared. It also flushes the old pmd entry and orders pagetable
insertion before rmap insertion.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1381141781-10992-9-git-send-email-mgorman@suse.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Mel Gorman [Mon, 7 Oct 2013 10:28:45 +0000 (11:28 +0100)]
mm: numa: Sanitize task_numa_fault() callsites
There are three callers of task_numa_fault():
- do_huge_pmd_numa_page():
Accounts against the current node, not the node where the
page resides, unless we migrated, in which case it accounts
against the node we migrated to.
- do_numa_page():
Accounts against the current node, not the node where the
page resides, unless we migrated, in which case it accounts
against the node we migrated to.
- do_pmd_numa_page():
Accounts not at all when the page isn't migrated, otherwise
accounts against the node we migrated towards.
This seems wrong to me; all three sites should have the same
sementaics, furthermore we should accounts against where the page
really is, we already know where the task is.
So modify all three sites to always account; we did after all receive
the fault; and always account to where the page is after migration,
regardless of success.
They all still differ on when they clear the PTE/PMD; ideally that
would get sorted too.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1381141781-10992-8-git-send-email-mgorman@suse.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Mel Gorman [Mon, 7 Oct 2013 10:28:44 +0000 (11:28 +0100)]
mm: Prevent parallel splits during THP migration
THP migrations are serialised by the page lock but on its own that does
not prevent THP splits. If the page is split during THP migration then
the pmd_same checks will prevent page table corruption but the unlock page
and other fix-ups potentially will cause corruption. This patch takes the
anon_vma lock to prevent parallel splits during migration.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1381141781-10992-7-git-send-email-mgorman@suse.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Mel Gorman [Mon, 7 Oct 2013 10:28:43 +0000 (11:28 +0100)]
mm: Wait for THP migrations to complete during NUMA hinting faults
The locking for migrating THP is unusual. While normal page migration
prevents parallel accesses using a migration PTE, THP migration relies on
a combination of the page_table_lock, the page lock and the existance of
the NUMA hinting PTE to guarantee safety but there is a bug in the scheme.
If a THP page is currently being migrated and another thread traps a
fault on the same page it checks if the page is misplaced. If it is not,
then pmd_numa is cleared. The problem is that it checks if the page is
misplaced without holding the page lock meaning that the racing thread
can be migrating the THP when the second thread clears the NUMA bit
and faults a stale page.
This patch checks if the page is potentially being migrated and stalls
using the lock_page if it is potentially being migrated before checking
if the page is misplaced or not.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1381141781-10992-6-git-send-email-mgorman@suse.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Mel Gorman [Mon, 7 Oct 2013 10:28:42 +0000 (11:28 +0100)]
mm: numa: Do not account for a hinting fault if we raced
If another task handled a hinting fault in parallel then do not double
account for it.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1381141781-10992-5-git-send-email-mgorman@suse.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Mon, 7 Oct 2013 10:28:41 +0000 (11:28 +0100)]
sched/numa: Fix comments
Fix a 80 column violation and a PTE vs PMD reference.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1381141781-10992-4-git-send-email-mgorman@suse.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Mel Gorman [Mon, 7 Oct 2013 10:28:40 +0000 (11:28 +0100)]
mm: numa: Document automatic NUMA balancing sysctls
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1381141781-10992-3-git-send-email-mgorman@suse.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Wed, 9 Oct 2013 10:36:13 +0000 (12:36 +0200)]
Merge tag 'v3.12-rc4' into sched/core
Merge Linux v3.12-rc4 to fix a conflict and also to refresh the tree
before applying more scheduler patches.
Conflicts:
arch/avr32/include/asm/Kbuild
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Linus Torvalds [Sun, 6 Oct 2013 21:00:20 +0000 (14:00 -0700)]
Linux 3.12-rc4
Eric W. Biederman [Sat, 5 Oct 2013 20:15:30 +0000 (13:15 -0700)]
net: Update the sysctl permissions handler to test effective uid/gid
Modify the code to use current_euid(), and in_egroup_p, as in done
in fs/proc/proc_sysctl.c:test_perm()
Cc: stable@vger.kernel.org
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reported-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 6 Oct 2013 20:38:31 +0000 (13:38 -0700)]
Merge git://git./linux/kernel/git/nab/target-pending
Pull SCSI target fixes from Nicholas Bellinger:
"Here are the outstanding target fixes queued up for v3.12-rc4 code.
The highlights include:
- Make vhost/scsi tag percpu_ida_alloc() use GFP_ATOMIC
- Allow sess_cmd_map allocation failure fallback to use vzalloc
- Fix COMPARE_AND_WRITE se_cmd->data_length bug with FILEIO backends
- Fixes for COMPARE_AND_WRITE callback recursive failure OOPs + non
zero scsi_status bug
- Make iscsi-target do acknowledgement tag release from RX context
- Setup iscsi-target with extra (cmdsn_depth / 2) percpu_ida tags
Also included is a iscsi-target patch CC'ed for v3.10+ that avoids
legacy wait_for_task=true release during fast-past StatSN
acknowledgement, and two other SRP target related patches that address
long-standing issues that are CC'ed for v3.3+.
Extra thanks to Thomas Glanzmann for his testing feedback with
COMPARE_AND_WRITE + EXTENDED_COPY VAAI logic"
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
iscsi-target; Allow an extra tag_num / 2 number of percpu_ida tags
iscsi-target: Perform release of acknowledged tags from RX context
iscsi-target: Only perform wait_for_tasks when performing shutdown
target: Fail on non zero scsi_status in compare_and_write_callback
target: Fix recursive COMPARE_AND_WRITE callback failure
target: Reset data_length for COMPARE_AND_WRITE to NoLB * block_size
ib_srpt: always set response for task management
target: Fall back to vzalloc upon ->sess_cmd_map kzalloc failure
vhost/scsi: Use GFP_ATOMIC with percpu_ida_alloc for obtaining tag
ib_srpt: Destroy cm_id before destroying QP.
target: Fix xop->dbl assignment in target_xcopy_parse_segdesc_02
Linus Torvalds [Sun, 6 Oct 2013 20:35:15 +0000 (13:35 -0700)]
Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dma
Pull slave-dmaengine fixes from Vinod Koul:
"Here is the slave dmanegine fixes. We have the fix for deadlock issue
on imx-dma by Michael and Josh's edma config fix along with author
change"
* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: imx-dma: fix callback path in tasklet
dmaengine: imx-dma: fix lockdep issue between irqhandler and tasklet
dmaengine: imx-dma: fix slow path issue in prep_dma_cyclic
dma/Kconfig: Make TI_EDMA select TI_PRIV_EDMA
edma: Update author email address
Shawn Bohrer [Fri, 4 Oct 2013 19:24:53 +0000 (14:24 -0500)]
sched/rt: Remove redundant nr_cpus_allowed test
In
76854c7e8f3f4172fef091e78d88b3b751463ac6 ("sched: Use
rt.nr_cpus_allowed to recover select_task_rq() cycles") an
optimization was added to select_task_rq_rt() that immediately
returns when p->nr_cpus_allowed == 1 at the beginning of the
function.
This makes the latter p->nr_cpus_allowed > 1 check redundant,
which can now be removed.
Signed-off-by: Shawn Bohrer <sbohrer@rgmadvisors.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Mike Galbraith <mgalbraith@suse.de>
Cc: tomk@rgmadvisors.com
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1380914693-24634-1-git-send-email-shawn.bohrer@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Linus Torvalds [Sat, 5 Oct 2013 19:17:24 +0000 (12:17 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
"This is a small collection of fixes, including a regression fix from
Liu Bo that solves rare crashes with compression on.
I've merged my for-linus up to 3.12-rc3 because the top commit is only
meant for 3.12. The rest of the fixes are also available in my master
branch on top of my last 3.11 based pull"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
btrfs: Fix crash due to not allocating integrity data for a bioset
Btrfs: fix a use-after-free bug in btrfs_dev_replace_finishing
Btrfs: eliminate races in worker stopping code
Btrfs: fix crash of compressed writes
Btrfs: fix transid verify errors when recovering log tree
Linus Torvalds [Sat, 5 Oct 2013 19:11:40 +0000 (12:11 -0700)]
Merge tag 'gpio-v3.12-2' of git://git./linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"Two patches for the OMAP driver, dealing with setting up IRQs properly
on the device tree boot path"
* tag 'gpio-v3.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio/omap: auto-setup a GPIO when used as an IRQ
gpio/omap: maintain GPIO and IRQ usage separately
Linus Torvalds [Sat, 5 Oct 2013 18:54:10 +0000 (11:54 -0700)]
Merge tag 'usb-3.12-rc4' of git://git./linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are none fixes for various USB driver problems. The majority are
gadget/musb fixes, but there are some new device ids in here as well"
* tag 'usb-3.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: chipidea: add Intel Clovertrail pci id
usb: gadget: s3c-hsotg: fix can_write limit for non-periodic endpoints
usb: gadget: f_fs: fix error handling
usb: musb: dsps: do not bind to "musb-hdrc"
USB: serial: option: Ignore card reader interface on Huawei E1750
usb: musb: gadget: fix otg active status flag
usb: phy: gpio-vbus: fix deferred probe from __init
usb: gadget: pxa25x_udc: fix deferred probe from __init
usb: musb: fix otg default state
Linus Torvalds [Sat, 5 Oct 2013 18:26:19 +0000 (11:26 -0700)]
Merge tag 'tty-3.12-rc4' of git://git./linux/kernel/git/gregkh/tty
Pull tty fixes from Greg KH:
"Here are two tty driver fixes for 3.12-rc4.
One fixes the reported regression in the n_tty code that a number of
people found recently, and the other one fixes an issue with xen
consoles that broke in 3.10"
* tag 'tty-3.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
xen/hvc: allow xenboot console to be used again
tty: Fix pty master read() after slave closes
Linus Torvalds [Sat, 5 Oct 2013 18:25:38 +0000 (11:25 -0700)]
Merge tag 'staging-3.12-rc4' of git://git./linux/kernel/git/gregkh/staging
Pull staging fixes from Greg KH:
"Here are 4 tiny staging and iio driver fixes for 3.12-rc4. Nothing
major, just some small fixes for reported issues"
* tag 'staging-3.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: comedi: ni_65xx: (bug fix) confine insn_bits to one subdevice
iio:magnetometer: Bugfix magnetometer default output registers
iio: Remove debugfs entries in iio_device_unregister()
iio: amplifiers: ad8366: Remove regulator_put
Darrick J. Wong [Fri, 20 Sep 2013 03:37:07 +0000 (20:37 -0700)]
btrfs: Fix crash due to not allocating integrity data for a bioset
When btrfs creates a bioset, we must also allocate the integrity data pool.
Otherwise btrfs will crash when it tries to submit a bio to a checksumming
disk:
BUG: unable to handle kernel NULL pointer dereference at
0000000000000018
IP: [<
ffffffff8111e28a>] mempool_alloc+0x4a/0x150
PGD
2305e4067 PUD
23063d067 PMD 0
Oops: 0000 [#1] PREEMPT SMP
Modules linked in: btrfs scsi_debug xfs ext4 jbd2 ext3 jbd mbcache
sch_fq_codel eeprom lpc_ich mfd_core nfsd exportfs auth_rpcgss af_packet
raid6_pq xor zlib_deflate libcrc32c [last unloaded: scsi_debug]
CPU: 1 PID: 4486 Comm: mount Not tainted 3.12.0-rc1-mcsum #2
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
task:
ffff8802451c9720 ti:
ffff880230698000 task.ti:
ffff880230698000
RIP: 0010:[<
ffffffff8111e28a>] [<
ffffffff8111e28a>] mempool_alloc+0x4a/0x150
RSP: 0018:
ffff880230699688 EFLAGS:
00010286
RAX:
0000000000000001 RBX:
0000000000000000 RCX:
00000000005f8445
RDX:
0000000000000001 RSI:
0000000000000010 RDI:
0000000000000000
RBP:
ffff8802306996f8 R08:
0000000000011200 R09:
0000000000000008
R10:
0000000000000020 R11:
ffff88009d6e8000 R12:
0000000000011210
R13:
0000000000000030 R14:
ffff8802306996b8 R15:
ffff8802451c9720
FS:
00007f25b8a16800(0000) GS:
ffff88024fc80000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
000000008005003b
CR2:
0000000000000018 CR3:
0000000230576000 CR4:
00000000000007e0
Stack:
ffff8802451c9720 0000000000000002 ffffffff81a97100 0000000000281250
ffffffff81a96480 ffff88024fc99150 ffff880228d18200 0000000000000000
0000000000000000 0000000000000040 ffff880230e8c2e8 ffff8802459dc900
Call Trace:
[<
ffffffff811b2208>] bio_integrity_alloc+0x48/0x1b0
[<
ffffffff811b26fc>] bio_integrity_prep+0xac/0x360
[<
ffffffff8111e298>] ? mempool_alloc+0x58/0x150
[<
ffffffffa03e8041>] ? alloc_extent_state+0x31/0x110 [btrfs]
[<
ffffffff81241579>] blk_queue_bio+0x1c9/0x460
[<
ffffffff8123e58a>] generic_make_request+0xca/0x100
[<
ffffffff8123e639>] submit_bio+0x79/0x160
[<
ffffffffa03f865e>] btrfs_map_bio+0x48e/0x5b0 [btrfs]
[<
ffffffffa03c821a>] btree_submit_bio_hook+0xda/0x110 [btrfs]
[<
ffffffffa03e7eba>] submit_one_bio+0x6a/0xa0 [btrfs]
[<
ffffffffa03ef450>] read_extent_buffer_pages+0x250/0x310 [btrfs]
[<
ffffffff8125eef6>] ? __radix_tree_preload+0x66/0xf0
[<
ffffffff8125f1c5>] ? radix_tree_insert+0x95/0x260
[<
ffffffffa03c66f6>] btree_read_extent_buffer_pages.constprop.128+0xb6/0x120
[btrfs]
[<
ffffffffa03c8c1a>] read_tree_block+0x3a/0x60 [btrfs]
[<
ffffffffa03caefd>] open_ctree+0x139d/0x2030 [btrfs]
[<
ffffffffa03a282a>] btrfs_mount+0x53a/0x7d0 [btrfs]
[<
ffffffff8113ab0b>] ? pcpu_alloc+0x8eb/0x9f0
[<
ffffffff81167305>] ? __kmalloc_track_caller+0x35/0x1e0
[<
ffffffff81176ba0>] mount_fs+0x20/0xd0
[<
ffffffff81191096>] vfs_kern_mount+0x76/0x120
[<
ffffffff81193320>] do_mount+0x200/0xa40
[<
ffffffff81135cdb>] ? strndup_user+0x5b/0x80
[<
ffffffff81193bf0>] SyS_mount+0x90/0xe0
[<
ffffffff8156d31d>] system_call_fastpath+0x1a/0x1f
Code: 4c 8d 75 a8 4c 89 6d e8 45 89 e0 4c 8d 6f 30 48 89 5d d8 41 83 e0 af 48
89 fb 49 83 c6 18 4c 89 7d f8 65 4c 8b 3c 25 c0 b8 00 00 <48> 8b 73 18 44 89 c7
44 89 45 98 ff 53 20 48 85 c0 48 89 c2 74
RIP [<
ffffffff8111e28a>] mempool_alloc+0x4a/0x150
RSP <
ffff880230699688>
CR2:
0000000000000018
---[ end trace
7a96042017ed21e2 ]---
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Chris Mason [Sat, 5 Oct 2013 14:51:32 +0000 (10:51 -0400)]
Merge branch 'for-linus' into for-linus-3.12
Linus Torvalds [Sat, 5 Oct 2013 03:50:16 +0000 (20:50 -0700)]
Merge branch 'for-linus' of git://git.samba.org/sfrench/cifs-2.6
Pull CIFS fixes from Steve French:
"Small set of cifs fixes. Most important is Jeff's fix that works
around disconnection problems which can be caused by simultaneous use
of user space tools (starting a long running smbclient backup then
doing a cifs kernel mount) or multiple cifs mounts through a NAT, and
Jim's fix to deal with reexport of cifs share.
I expect to send two more cifs fixes next week (being tested now) -
fixes to address an SMB2 unmount hang when server dies and a fix for
cifs symlink handling of Windows "NFS" symlinks"
* 'for-linus' of git://git.samba.org/sfrench/cifs-2.6:
[CIFS] update cifs.ko version
[CIFS] Remove ext2 flags that have been moved to fs.h
[CIFS] Provide sane values for nlink
cifs: stop trying to use virtual circuits
CIFS: FS-Cache: Uncache unread pages in cifs_readpages() before freeing them
Linus Torvalds [Sat, 5 Oct 2013 03:48:20 +0000 (20:48 -0700)]
Merge tag 'pci-v3.12-fixes-1' of git://git./linux/kernel/git/helgaas/pci
Pull PCI fix from Bjorn Helgaas:
"We merged what was intended to be an MMCONFIG cleanup, but in fact,
for systems without _CBA (which is almost everything), it broke
extended config space for domain 0 and it broke all config space for
other domains.
This reverts the change"
* tag 'pci-v3.12-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
Revert "x86/PCI: MMCONFIG: Check earlier for MMCONFIG region at address zero"
Bjorn Helgaas [Fri, 4 Oct 2013 22:14:30 +0000 (16:14 -0600)]
Revert "x86/PCI: MMCONFIG: Check earlier for MMCONFIG region at address zero"
This reverts commit
07f9b61c3915e8eb156cb4461b3946736356ad02.
07f9b61c was intended to be a cleanup that didn't change anything, but in
fact, for systems without _CBA (which is almost everything), it broke
extended config space for domain 0 and all config space for other domains.
Reference: http://lkml.kernel.org/r/
20131004011806.GE20450@dangermouse.emea.sgi.com
Reported-by: Hedi Berriche <hedi@sgi.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Linus Torvalds [Fri, 4 Oct 2013 22:03:42 +0000 (15:03 -0700)]
Merge tag 'pm+acpi-3.12-rc4' of git://git./linux/kernel/git/rafael/linux-pm
Pull ACPI and power management fixes from Rafael Wysocki:
- The resume part of user space driven hibernation (s2disk) is now
broken after the change that moved the creation of memory bitmaps to
after the freezing of tasks, because I forgot that the resume utility
loaded the image before freezing tasks and needed the bitmaps for
that. The fix adds special handling for that case.
- One of recent commits changed the export of acpi_bus_get_device() to
EXPORT_SYMBOL_GPL(), which was technically correct but broke existing
binary modules using that function including one in particularly
widespread use. Change it back to EXPORT_SYMBOL().
- The intel_pstate driver sometimes fails to disable turbo if its
no_turbo sysfs attribute is set. Fix from Srinivas Pandruvada.
- One of recent cpufreq fixes forgot to update a check in cpufreq-cpu0
which still (incorrectly) treats non-NULL as non-error. Fix from
Philipp Zabel.
- The SPEAr cpufreq driver uses a wrong variable type in one place
preventing it from catching errors returned by one of the functions
called by it. Fix from Sachin Kamat.
* tag 'pm+acpi-3.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: Use EXPORT_SYMBOL() for acpi_bus_get_device()
intel_pstate: fix no_turbo
cpufreq: cpufreq-cpu0: NULL is a valid regulator, part 2
cpufreq: SPEAr: Fix incorrect variable type
PM / hibernate: Fix user space driven resume regression
Linus Torvalds [Fri, 4 Oct 2013 21:47:22 +0000 (14:47 -0700)]
Merge tag 'xfs-for-linus-v3.12-rc4' of git://oss.sgi.com/xfs/xfs
Pull xfs bugfixes from Ben Myers:
"There are lockdep annotations for project quotas, a fix for dirent
dtype support on v4 filesystems, a fix for a memory leak in recovery,
and a fix for the build error that resulted from it. D'oh"
* tag 'xfs-for-linus-v3.12-rc4' of git://oss.sgi.com/xfs/xfs:
xfs: Use kmem_free() instead of free()
xfs: fix memory leak in xlog_recover_add_to_trans
xfs: dirent dtype presence is dependent on directory magic numbers
xfs: lockdep needs to know about 3 dquot-deep nesting
Linus Torvalds [Fri, 4 Oct 2013 21:05:38 +0000 (14:05 -0700)]
selinux: remove 'flags' parameter from avc_audit()
Now avc_audit() has no more users with that parameter. Remove it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 4 Oct 2013 19:57:22 +0000 (12:57 -0700)]
selinux: avc_has_perm_flags has no more users
.. so get rid of it. The only indirect users were all the
avc_has_perm() callers which just expanded to have a zero flags
argument.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ilya Dryomov [Wed, 2 Oct 2013 17:41:01 +0000 (20:41 +0300)]
Btrfs: fix a use-after-free bug in btrfs_dev_replace_finishing
free_device rcu callback, scheduled from btrfs_rm_dev_replace_srcdev,
can be processed before btrfs_scratch_superblock is called, which would
result in a use-after-free on btrfs_device contents. Fix this by
zeroing the superblock before the rcu callback is registered.
Cc: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Ilya Dryomov [Wed, 2 Oct 2013 16:39:50 +0000 (19:39 +0300)]
Btrfs: eliminate races in worker stopping code
The current implementation of worker threads in Btrfs has races in
worker stopping code, which cause all kinds of panics and lockups when
running btrfs/011 xfstest in a loop. The problem is that
btrfs_stop_workers is unsynchronized with respect to check_idle_worker,
check_busy_worker and __btrfs_start_workers.
E.g., check_idle_worker race flow:
btrfs_stop_workers(): check_idle_worker(aworker):
- grabs the lock
- splices the idle list into the
working list
- removes the first worker from the
working list
- releases the lock to wait for
its kthread's completion
- grabs the lock
- if aworker is on the working list,
moves aworker from the working list
to the idle list
- releases the lock
- grabs the lock
- puts the worker
- removes the second worker from the
working list
......
btrfs_stop_workers returns, aworker is on the idle list
FS is umounted, memory is freed
......
aworker is waken up, fireworks ensue
With this applied, I wasn't able to trigger the problem in 48 hours,
whereas previously I could reliably reproduce at least one of these
races within an hour.
Reported-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Liu Bo [Tue, 1 Oct 2013 15:49:49 +0000 (23:49 +0800)]
Btrfs: fix crash of compressed writes
The crash[1] is found by xfstests/generic/208 with "-o compress",
it's not reproduced everytime, but it does panic.
The bug is quite interesting, it's actually introduced by a recent commit
(
573aecafca1cf7a974231b759197a1aebcf39c2a,
Btrfs: actually limit the size of delalloc range).
Btrfs implements delay allocation, so during writeback, we
(1) get a page A and lock it
(2) search the state tree for delalloc bytes and lock all pages within the range
(3) process the delalloc range, including find disk space and create
ordered extent and so on.
(4) submit the page A.
It runs well in normal cases, but if we're in a racy case, eg.
buffered compressed writes and aio-dio writes,
sometimes we may fail to lock all pages in the 'delalloc' range,
in which case, we need to fall back to search the state tree again with
a smaller range limit(max_bytes = PAGE_CACHE_SIZE - offset).
The mentioned commit has a side effect, that is, in the fallback case,
we can find delalloc bytes before the index of the page we already have locked,
so we're in the case of (delalloc_end <= *start) and return with (found > 0).
This ends with not locking delalloc pages but making ->writepage still
process them, and the crash happens.
This fixes it by just thinking that we find nothing and returning to caller
as the caller knows how to deal with it properly.
[1]:
------------[ cut here ]------------
kernel BUG at mm/page-writeback.c:2170!
[...]
CPU: 2 PID: 11755 Comm: btrfs-delalloc- Tainted: G O 3.11.0+ #8
[...]
RIP: 0010:[<
ffffffff810f5093>] [<
ffffffff810f5093>] clear_page_dirty_for_io+0x1e/0x83
[...]
[ 4934.248731] Stack:
[ 4934.248731]
ffff8801477e5dc8 ffffea00049b9f00 ffff8801869f9ce8 ffffffffa02b841a
[ 4934.248731]
0000000000000000 0000000000000000 0000000000000fff 0000000000000620
[ 4934.248731]
ffff88018db59c78 ffffea0005da8d40 ffffffffa02ff860 00000001810016c0
[ 4934.248731] Call Trace:
[ 4934.248731] [<
ffffffffa02b841a>] extent_range_clear_dirty_for_io+0xcf/0xf5 [btrfs]
[ 4934.248731] [<
ffffffffa02a8889>] compress_file_range+0x1dc/0x4cb [btrfs]
[ 4934.248731] [<
ffffffff8104f7af>] ? detach_if_pending+0x22/0x4b
[ 4934.248731] [<
ffffffffa02a8bad>] async_cow_start+0x35/0x53 [btrfs]
[ 4934.248731] [<
ffffffffa02c694b>] worker_loop+0x14b/0x48c [btrfs]
[ 4934.248731] [<
ffffffffa02c6800>] ? btrfs_queue_worker+0x25c/0x25c [btrfs]
[ 4934.248731] [<
ffffffff810608f5>] kthread+0x8d/0x95
[ 4934.248731] [<
ffffffff81060868>] ? kthread_freezable_should_stop+0x43/0x43
[ 4934.248731] [<
ffffffff814fe09c>] ret_from_fork+0x7c/0xb0
[ 4934.248731] [<
ffffffff81060868>] ? kthread_freezable_should_stop+0x43/0x43
[ 4934.248731] Code: ff 85 c0 0f 94 c0 0f b6 c0 59 5b 5d c3 0f 1f 44 00 00 55 48 89 e5 41 54 53 48 89 fb e8 2c de 00 00 49 89 c4 48 8b 03 a8 01 75 02 <0f> 0b 4d 85 e4 74 52 49 8b 84 24 80 00 00 00 f6 40 20 01 75 44
[ 4934.248731] RIP [<
ffffffff810f5093>] clear_page_dirty_for_io+0x1e/0x83
[ 4934.248731] RSP <
ffff8801869f9c48>
[ 4934.280307] ---[ end trace
36f06d3f8750236a ]---
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Josef Bacik [Mon, 30 Sep 2013 18:10:43 +0000 (14:10 -0400)]
Btrfs: fix transid verify errors when recovering log tree
If we crash with a log, remount and recover that log, and then crash before we
can commit another transaction we will get transid verify errors on the next
mount. This is because we were not zero'ing out the log when we committed the
transaction after recovery. This is ok as long as we commit another transaction
at some point in the future, but if you abort or something else goes wrong you
can end up in this weird state because the recovery stuff says that the tree log
should have a generation+1 of the super generation, which won't be the case of
the transaction that was started for recovery. Fix this by removing the check
and _always_ zero out the log portion of the super when we commit a transaction.
This fixes the transid verify issues I was seeing with my force errors tests.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Linus Torvalds [Fri, 4 Oct 2013 19:54:11 +0000 (12:54 -0700)]
selinux: remove 'flags' parameter from inode_has_perm
Every single user passes in '0'. I think we had non-zero users back in
some stone age when selinux_inode_permission() was implemented in terms
of inode_has_perm(), but that complicated case got split up into a
totally separate code-path so that we could optimize the much simpler
special cases.
See commit
2e33405785d3 ("SELinux: delay initialization of audit data in
selinux_inode_permission") for example.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Thierry Reding [Tue, 1 Oct 2013 14:47:53 +0000 (16:47 +0200)]
xfs: Use kmem_free() instead of free()
This fixes a build failure caused by calling the free() function which
does not exist in the Linux kernel.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
(cherry picked from commit
aaaae98022efa4f3c31042f1fdf9e7a0c5f04663)
tinguely@sgi.com [Fri, 27 Sep 2013 14:00:55 +0000 (09:00 -0500)]
xfs: fix memory leak in xlog_recover_add_to_trans
Free the memory in error path of xlog_recover_add_to_trans().
Normally this memory is freed in recovery pass2, but is leaked
in the error path.
Signed-off-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
(cherry picked from commit
519ccb81ac1c8e3e4eed294acf93be00b43dcad6)
Dave Chinner [Sun, 29 Sep 2013 23:37:04 +0000 (09:37 +1000)]
xfs: dirent dtype presence is dependent on directory magic numbers
The determination of whether a directory entry contains a dtype
field originally was dependent on the filesystem having CRCs
enabled. This meant that the format for dtype beign enabled could be
determined by checking the directory block magic number rather than
doing a feature bit check. This was useful in that it meant that we
didn't need to pass a struct xfs_mount around to functions that
were already supplied with a directory block header.
Unfortunately, the introduction of dtype fields into the v4
structure via a feature bit meant this "use the directory block
magic number" method of discriminating the dirent entry sizes is
broken. Hence we need to convert the places that use magic number
checks to use feature bit checks so that they work correctly and not
by chance.
The current code works on v4 filesystems only because the dirent
size roundup covers the extra byte needed by the dtype field in the
places where this problem occurs.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
(cherry picked from commit
367993e7c6428cb7617ab7653d61dca54e2fdede)
Dave Chinner [Sun, 29 Sep 2013 23:37:03 +0000 (09:37 +1000)]
xfs: lockdep needs to know about 3 dquot-deep nesting
Michael Semon reported that xfs/299 generated this lockdep warning:
=============================================
[ INFO: possible recursive locking detected ]
3.12.0-rc2+ #2 Not tainted
---------------------------------------------
touch/21072 is trying to acquire lock:
(&xfs_dquot_other_class){+.+...}, at: [<
c12902fb>] xfs_trans_dqlockedjoin+0x57/0x64
but task is already holding lock:
(&xfs_dquot_other_class){+.+...}, at: [<
c12902fb>] xfs_trans_dqlockedjoin+0x57/0x64
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&xfs_dquot_other_class);
lock(&xfs_dquot_other_class);
*** DEADLOCK ***
May be due to missing lock nesting notation
7 locks held by touch/21072:
#0: (sb_writers#10){++++.+}, at: [<
c11185b6>] mnt_want_write+0x1e/0x3e
#1: (&type->i_mutex_dir_key#4){+.+.+.}, at: [<
c11078ee>] do_last+0x245/0xe40
#2: (sb_internal#2){++++.+}, at: [<
c122c9e0>] xfs_trans_alloc+0x1f/0x35
#3: (&(&ip->i_lock)->mr_lock/1){+.+...}, at: [<
c126cd1b>] xfs_ilock+0x100/0x1f1
#4: (&(&ip->i_lock)->mr_lock){++++-.}, at: [<
c126cf52>] xfs_ilock_nowait+0x105/0x22f
#5: (&dqp->q_qlock){+.+...}, at: [<
c12902fb>] xfs_trans_dqlockedjoin+0x57/0x64
#6: (&xfs_dquot_other_class){+.+...}, at: [<
c12902fb>] xfs_trans_dqlockedjoin+0x57/0x64
The lockdep annotation for dquot lock nesting only understands
locking for user and "other" dquots, not user, group and quota
dquots. Fix the annotations to match the locking heirarchy we now
have.
Reported-by: Michael L. Semon <mlsemon35@gmail.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
(cherry picked from commit
f112a049712a5c07de25d511c3c6587a2b1a015e)
Linus Torvalds [Fri, 4 Oct 2013 16:06:13 +0000 (09:06 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/mszeredi/fuse
Pull fuse bugfixes from Miklos Szeredi:
"This contains two more fixes by Maxim for writeback/truncate races and
fixes for RCU walk in fuse_dentry_revalidate()"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: no RCU mode in fuse_access()
fuse: readdirplus: fix RCU walk
fuse: don't check_submounts_and_drop() in RCU walk
fuse: fix fallocate vs. ftruncate race
fuse: wait for writeback in fuse_file_fallocate()
Linus Torvalds [Fri, 4 Oct 2013 16:05:12 +0000 (09:05 -0700)]
Merge tag 'iommu-fixes-v3.12-rc3' of git://git./linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
"A couple of fixes from the IOMMU side:
- some small fixes for the new ARM-SMMU driver
- a register offset correction for VT-d
- add MAINTAINERS entry for drivers/iommu
Overall no really big or intrusive changes"
* tag 'iommu-fixes-v3.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
x86/iommu: correct ICS register offset
MAINTAINERS: add overall IOMMU section
iommu/arm-smmu: don't enable SMMU device until probing has completed
iommu/arm-smmu: fix iommu_present() test in init
iommu/arm-smmu: fix a signedness bug
Linus Torvalds [Fri, 4 Oct 2013 16:04:26 +0000 (09:04 -0700)]
Merge tag 'arm64-stable' of git://git./linux/kernel/git/cmarinas/linux-aarch64
Pull ARM64 fixes/updates from Catalin Marinas:
- Bug-fixes (get_user/put_user, incorrect register width for ASID,
FPSIMD initialisation)
- Kconfig clean-up
- defconfig update
* tag 'arm64-stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64:
arm64: Remove duplicate DEBUG_STACK_USAGE config
arm64: include VIRTIO_{MMIO,BLK} in defconfig
arm64: include EXT4 in defconfig
arm64: fix possible invalid FPSIMD initialization state
arm64: use correct register width when retrieving ASID
arm64: avoid multiple evaluation of ptr in get_user/put_user()
Linus Torvalds [Fri, 4 Oct 2013 16:03:51 +0000 (09:03 -0700)]
Merge branch 'upstream' of git://git.linux-mips.org/ralf/upstream-linus
Pull MIPS fixes from Ralf Baechle:
"Two small fixes for 3.12 only this week. I have a few more fixes
pending but those are conceptually more complex so will have to wait
for a bit longer"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: Fix forgotten preempt_enable() when CPU has inclusive pcaches
MIPS: Alchemy: MTX-1: fix incorrect placement of __initdata tag
Linus Torvalds [Fri, 4 Oct 2013 16:03:07 +0000 (09:03 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Two simplefb fixes"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/simplefb: Mark framebuffer mem-resources as IORESOURCE_BUSY to avoid bootup warning
x86/simplefb: Fix overflow causing bogus fall-back
Linus Torvalds [Fri, 4 Oct 2013 16:02:35 +0000 (09:02 -0700)]
Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull irq fix from Ingo Molnar:
"Frederic's minimal fix for hardirq/softirq nesting crashes"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irq: Force hardirq exit's softirq processing on its own stack
Ingo Molnar [Fri, 4 Oct 2013 08:24:49 +0000 (10:24 +0200)]
sched/wait: Clean up wait.h details a bit
Since we are changing wait.h profoundly, use the opportunity to:
- add a sentence to explain what this file is about
- remove whitespace noise
- prettify weird looking line break fixup attempts
- standardize type definition and initialization sequences
- use consistent style details
No code is changed.
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/n/tip-O8dIie5swnctqpupakatvqyq@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Michael Grzeschik [Tue, 17 Sep 2013 13:56:08 +0000 (15:56 +0200)]
dmaengine: imx-dma: fix callback path in tasklet
We need to free the ld_active list head before jumping into the callback
routine. Otherwise the callback could run into issue_pending and change
our ld_active list head we just going to free. This will run the channel
list into an currupted and undefined state.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Michael Grzeschik [Tue, 17 Sep 2013 13:56:07 +0000 (15:56 +0200)]
dmaengine: imx-dma: fix lockdep issue between irqhandler and tasklet
The tasklet and irqhandler are using spin_lock while other routines are
using spin_lock_irqsave/restore. This leads to lockdep issues as
described bellow. This patch is changing the code to use
spinlock_irq_save/restore in both code pathes.
As imxdma_xfer_desc always gets called with spin_lock_irqsave lock held,
this patch also removes the spare call inside the routine to avoid
double locking.
[ 403.358162] =================================
[ 403.362549] [ INFO: inconsistent lock state ]
[ 403.366945] 3.10.0-
20130823+ #904 Not tainted
[ 403.371331] ---------------------------------
[ 403.375721] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
[ 403.381769] swapper/0 [HC0[0]:SC1[1]:HE1:SE0] takes:
[ 403.386762] (&(&imxdma->lock)->rlock){?.-...}, at: [<
c019d77c>] imxdma_tasklet+0x20/0x134
[ 403.395201] {IN-HARDIRQ-W} state was registered at:
[ 403.400108] [<
c004b264>] mark_lock+0x2a0/0x6b4
[ 403.404798] [<
c004d7c8>] __lock_acquire+0x650/0x1a64
[ 403.410004] [<
c004f15c>] lock_acquire+0x94/0xa8
[ 403.414773] [<
c02f74e4>] _raw_spin_lock+0x54/0x8c
[ 403.419720] [<
c019d094>] dma_irq_handler+0x78/0x254
[ 403.424845] [<
c0061124>] handle_irq_event_percpu+0x38/0x1b4
[ 403.430670] [<
c00612e4>] handle_irq_event+0x44/0x64
[ 403.435789] [<
c0063a70>] handle_level_irq+0xd8/0xf0
[ 403.440903] [<
c0060a20>] generic_handle_irq+0x28/0x38
[ 403.446194] [<
c0009cc4>] handle_IRQ+0x68/0x8c
[ 403.450789] [<
c0008714>] avic_handle_irq+0x3c/0x48
[ 403.455811] [<
c0008f84>] __irq_svc+0x44/0x74
[ 403.460314] [<
c0040b04>] cpu_startup_entry+0x88/0xf4
[ 403.465525] [<
c02f00d0>] rest_init+0xb8/0xe0
[ 403.470045] [<
c03e07dc>] start_kernel+0x28c/0x2d4
[ 403.474986] [<
a0008040>] 0xa0008040
[ 403.478709] irq event stamp: 50854
[ 403.482140] hardirqs last enabled at (50854): [<
c001c6b8>] tasklet_action+0x38/0xdc
[ 403.489954] hardirqs last disabled at (50853): [<
c001c6a0>] tasklet_action+0x20/0xdc
[ 403.497761] softirqs last enabled at (50850): [<
c001bc64>] _local_bh_enable+0x14/0x18
[ 403.505741] softirqs last disabled at (50851): [<
c001c268>] irq_exit+0x88/0xdc
[ 403.513026]
[ 403.513026] other info that might help us debug this:
[ 403.519593] Possible unsafe locking scenario:
[ 403.519593]
[ 403.525548] CPU0
[ 403.528020] ----
[ 403.530491] lock(&(&imxdma->lock)->rlock);
[ 403.534828] <Interrupt>
[ 403.537474] lock(&(&imxdma->lock)->rlock);
[ 403.541983]
[ 403.541983] *** DEADLOCK ***
[ 403.541983]
[ 403.547951] no locks held by swapper/0.
[ 403.551813]
[ 403.551813] stack backtrace:
[ 403.556222] CPU: 0 PID: 0 Comm: swapper Not tainted 3.10.0-
20130823+ #904
[ 403.563039] Backtrace:
[ 403.565581] [<
c000b98c>] (dump_backtrace+0x0/0x10c) from [<
c000bb28>] (show_stack+0x18/0x1c)
[ 403.574054] r6:
00000000 r5:
c05c51d8 r4:
c040bd58 r3:
00200000
[ 403.579872] [<
c000bb10>] (show_stack+0x0/0x1c) from [<
c02f398c>] (dump_stack+0x20/0x28)
[ 403.587955] [<
c02f396c>] (dump_stack+0x0/0x28) from [<
c02f29c8>] (print_usage_bug.part.28+0x224/0x28c)
[ 403.597340] [<
c02f27a4>] (print_usage_bug.part.28+0x0/0x28c) from [<
c004b404>] (mark_lock+0x440/0x6b4)
[ 403.606682] r8:
c004a41c r7:
00000000 r6:
c040bd58 r5:
c040c040 r4:
00000002
[ 403.613566] [<
c004afc4>] (mark_lock+0x0/0x6b4) from [<
c004d844>] (__lock_acquire+0x6cc/0x1a64)
[ 403.622244] [<
c004d178>] (__lock_acquire+0x0/0x1a64) from [<
c004f15c>] (lock_acquire+0x94/0xa8)
[ 403.631010] [<
c004f0c8>] (lock_acquire+0x0/0xa8) from [<
c02f74e4>] (_raw_spin_lock+0x54/0x8c)
[ 403.639614] [<
c02f7490>] (_raw_spin_lock+0x0/0x8c) from [<
c019d77c>] (imxdma_tasklet+0x20/0x134)
[ 403.648434] r6:
c3847010 r5:
c040e890 r4:
c38470d4
[ 403.653194] [<
c019d75c>] (imxdma_tasklet+0x0/0x134) from [<
c001c70c>] (tasklet_action+0x8c/0xdc)
[ 403.662013] r8:
c0599160 r7:
00000000 r6:
00000000 r5:
c040e890 r4:
c3847114 r3:
c019d75c
[ 403.670042] [<
c001c680>] (tasklet_action+0x0/0xdc) from [<
c001bd4c>] (__do_softirq+0xe4/0x1f0)
[ 403.678687] r7:
00000101 r6:
c0402000 r5:
c059919c r4:
00000001
[ 403.684498] [<
c001bc68>] (__do_softirq+0x0/0x1f0) from [<
c001c268>] (irq_exit+0x88/0xdc)
[ 403.692652] [<
c001c1e0>] (irq_exit+0x0/0xdc) from [<
c0009cc8>] (handle_IRQ+0x6c/0x8c)
[ 403.700514] r4:
00000030 r3:
00000110
[ 403.704192] [<
c0009c5c>] (handle_IRQ+0x0/0x8c) from [<
c0008714>] (avic_handle_irq+0x3c/0x48)
[ 403.712664] r5:
c0403f28 r4:
c0593ebc
[ 403.716343] [<
c00086d8>] (avic_handle_irq+0x0/0x48) from [<
c0008f84>] (__irq_svc+0x44/0x74)
[ 403.724733] Exception stack(0xc0403f28 to 0xc0403f70)
[ 403.729841] 3f20:
00000001 00000004 00000000 20000013 c0402000 c04104a8
[ 403.738078] 3f40:
00000002 c0b69620 a0004000 41069264 a03fb5f4 c0403f7c c0403f40 c0403f70
[ 403.746301] 3f60:
c004b92c c0009e74 20000013 ffffffff
[ 403.751383] r6:
ffffffff r5:
20000013 r4:
c0009e74 r3:
c004b92c
[ 403.757210] [<
c0009e30>] (arch_cpu_idle+0x0/0x4c) from [<
c0040b04>] (cpu_startup_entry+0x88/0xf4)
[ 403.766161] [<
c0040a7c>] (cpu_startup_entry+0x0/0xf4) from [<
c02f00d0>] (rest_init+0xb8/0xe0)
[ 403.774753] [<
c02f0018>] (rest_init+0x0/0xe0) from [<
c03e07dc>] (start_kernel+0x28c/0x2d4)
[ 403.783051] r6:
c03fc484 r5:
ffffffff r4:
c040a0e0
[ 403.787797] [<
c03e0550>] (start_kernel+0x0/0x2d4) from [<
a0008040>] (0xa0008040)
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Michael Grzeschik [Tue, 17 Sep 2013 13:56:06 +0000 (15:56 +0200)]
dmaengine: imx-dma: fix slow path issue in prep_dma_cyclic
When perparing cyclic_dma buffers by the sound layer, it will dump the
following lockdep trace. The leading snd_pcm_action_single get called
with read_lock_irq called. To fix this, we change the kcalloc call from
GFP_KERNEL to GFP_ATOMIC.
WARNING: at kernel/lockdep.c:2740 lockdep_trace_alloc+0xcc/0x114()
DEBUG_LOCKS_WARN_ON(irqs_disabled_flags(flags))
Modules linked in:
CPU: 0 PID: 832 Comm: aplay Not tainted 3.11.0-
20130823+ #903
Backtrace:
[<
c000b98c>] (dump_backtrace+0x0/0x10c) from [<
c000bb28>] (show_stack+0x18/0x1c)
r6:
c004c090 r5:
00000009 r4:
c2e0bd18 r3:
00404000
[<
c000bb10>] (show_stack+0x0/0x1c) from [<
c02f397c>] (dump_stack+0x20/0x28)
[<
c02f395c>] (dump_stack+0x0/0x28) from [<
c001531c>] (warn_slowpath_common+0x54/0x70)
[<
c00152c8>] (warn_slowpath_common+0x0/0x70) from [<
c00153dc>] (warn_slowpath_fmt+0x38/0x40)
r8:
00004000 r7:
a3b90000 r6:
000080d0 r5:
60000093 r4:
c2e0a000 r3:
00000009
[<
c00153a4>] (warn_slowpath_fmt+0x0/0x40) from [<
c004c090>] (lockdep_trace_alloc+0xcc/0x114)
r3:
c03955d8 r2:
c03907db
[<
c004bfc4>] (lockdep_trace_alloc+0x0/0x114) from [<
c008f16c>] (__kmalloc+0x34/0x118)
r6:
000080d0 r5:
c3800120 r4:
000080d0 r3:
c040a0f8
[<
c008f138>] (__kmalloc+0x0/0x118) from [<
c019c95c>] (imxdma_prep_dma_cyclic+0x64/0x168)
r7:
a3b90000 r6:
00000004 r5:
c39d8420 r4:
c3847150
[<
c019c8f8>] (imxdma_prep_dma_cyclic+0x0/0x168) from [<
c024618c>] (snd_dmaengine_pcm_trigger+0xa8/0x160)
[<
c02460e4>] (snd_dmaengine_pcm_trigger+0x0/0x160) from [<
c0241fa8>] (soc_pcm_trigger+0x90/0xb4)
r8:
c058c7b0 r7:
c3b8140c r6:
c39da560 r5:
00000001 r4:
c3b81000
[<
c0241f18>] (soc_pcm_trigger+0x0/0xb4) from [<
c022ece4>] (snd_pcm_do_start+0x2c/0x38)
r7:
00000000 r6:
00000003 r5:
c058c7b0 r4:
c3b81000
[<
c022ecb8>] (snd_pcm_do_start+0x0/0x38) from [<
c022e958>] (snd_pcm_action_single+0x40/0x6c)
[<
c022e918>] (snd_pcm_action_single+0x0/0x6c) from [<
c022ea64>] (snd_pcm_action_lock_irq+0x7c/0x9c)
r7:
00000003 r6:
c3b810f0 r5:
c3b810f0 r4:
c3b81000
[<
c022e9e8>] (snd_pcm_action_lock_irq+0x0/0x9c) from [<
c023009c>] (snd_pcm_common_ioctl1+0x7f8/0xfd0)
r8:
c3b7f888 r7:
005407b8 r6:
c2c991c0 r5:
c3b81000 r4:
c3b81000 r3:
00004142
[<
c022f8a4>] (snd_pcm_common_ioctl1+0x0/0xfd0) from [<
c023117c>] (snd_pcm_playback_ioctl1+0x464/0x488)
[<
c0230d18>] (snd_pcm_playback_ioctl1+0x0/0x488) from [<
c02311d4>] (snd_pcm_playback_ioctl+0x34/0x40)
r8:
c3b7f888 r7:
00004142 r6:
00000004 r5:
c2c991c0 r4:
005407b8
[<
c02311a0>] (snd_pcm_playback_ioctl+0x0/0x40) from [<
c00a14a4>] (vfs_ioctl+0x30/0x44)
[<
c00a1474>] (vfs_ioctl+0x0/0x44) from [<
c00a1fe8>] (do_vfs_ioctl+0x55c/0x5c0)
[<
c00a1a8c>] (do_vfs_ioctl+0x0/0x5c0) from [<
c00a208c>] (SyS_ioctl+0x40/0x68)
[<
c00a204c>] (SyS_ioctl+0x0/0x68) from [<
c0009380>] (ret_fast_syscall+0x0/0x44)
r8:
c0009544 r7:
00000036 r6:
bedeaa58 r5:
00000000 r4:
000000c0
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Peter Zijlstra [Wed, 2 Oct 2013 09:49:47 +0000 (11:49 +0200)]
MAINTAINERS, sched: Update file pattern
Took a while to sort out these bits and we'd like to be Cc:-ed on
future modifications to the waitqueue APIs and all that.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/n/tip-0ix315c7qcz88slmnrpshvmf@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Wed, 2 Oct 2013 09:22:33 +0000 (11:22 +0200)]
sched/wait: Make the __wait_event*() interface more friendly
Change all __wait_event*() implementations to match the corresponding
wait_event*() signature for convenience.
In particular this does away with the weird 'ret' logic. Since there
are __wait_event*() users this requires we update them too.
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20131002092529.042563462@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Wed, 2 Oct 2013 09:22:32 +0000 (11:22 +0200)]
sched/wait: Collapse __wait_event_hrtimeout()
While not a whole-sale replacement like the others we can still reduce
the size of __wait_event_hrtimeout() considerably by noting that the
actual core of __wait_event_hrtimeout() is identical to what
___wait_event() generates.
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20131002092528.972793648@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Wed, 2 Oct 2013 09:22:31 +0000 (11:22 +0200)]
sched/wait: Collapse __wait_event_killable()
Reduce macro complexity by using the new ___wait_event() helper.
No change in behaviour, identical generated code.
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20131002092528.898691966@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Wed, 2 Oct 2013 09:22:30 +0000 (11:22 +0200)]
sched/wait: Collapse __wait_event_interruptible_tty()
Reduce macro complexity by using the new ___wait_event() helper.
No change in behaviour, identical generated code.
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20131002092528.831085521@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Wed, 2 Oct 2013 09:22:29 +0000 (11:22 +0200)]
sched/wait: Collapse __wait_event_interruptible_lock_irq_timeout()
Reduce macro complexity by using the new ___wait_event() helper.
No change in behaviour, identical generated code.
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20131002092528.759956109@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Wed, 2 Oct 2013 09:22:28 +0000 (11:22 +0200)]
sched/wait: Collapse __wait_event_interruptible_lock_irq()
Reduce macro complexity by using the new ___wait_event() helper.
No change in behaviour, identical generated code.
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20131002092528.686006009@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Wed, 2 Oct 2013 09:22:27 +0000 (11:22 +0200)]
sched/wait: Collapse __wait_event_lock_irq()
Reduce macro complexity by using the new ___wait_event() helper.
No change in behaviour, identical generated code.
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20131002092528.612813379@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Wed, 2 Oct 2013 09:22:26 +0000 (11:22 +0200)]
sched/wait: Collapse __wait_event_interruptible_exclusive()
Reduce macro complexity by using the new ___wait_event() helper.
No change in behaviour, identical generated code.
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20131002092528.541716442@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Wed, 2 Oct 2013 09:22:25 +0000 (11:22 +0200)]
sched/wait: Collapse __wait_event_interruptible_timeout()
Reduce macro complexity by using the new ___wait_event() helper.
No change in behaviour, identical generated code.
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20131002092528.469616907@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Wed, 2 Oct 2013 09:22:24 +0000 (11:22 +0200)]
sched/wait: Collapse __wait_event_interruptible()
Reduce macro complexity by using the new ___wait_event() helper.
No change in behaviour, identical generated code.
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20131002092528.396949919@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Wed, 2 Oct 2013 09:22:23 +0000 (11:22 +0200)]
sched/wait: Collapse __wait_event_timeout()
Reduce macro complexity by using the new ___wait_event() helper.
No change in behaviour, identical generated code.
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20131002092528.325264677@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Wed, 2 Oct 2013 09:22:22 +0000 (11:22 +0200)]
sched/wait: Collapse __wait_event()
Reduce macro complexity by using the new ___wait_event() helper.
No change in behaviour, identical generated code.
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20131002092528.254863348@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Wed, 2 Oct 2013 09:22:21 +0000 (11:22 +0200)]
sched/wait: Introduce ___wait_event()
There's far too much duplication in the __wait_event macros; in order
to fix this introduce ___wait_event() a macro with the capability to
replace most other macros.
With the previous patches changing the various __wait_event*()
implementations to be more uniform; we can now collapse the lot
without also changing generated code.
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20131002092528.181897111@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Wed, 2 Oct 2013 09:22:20 +0000 (11:22 +0200)]
sched/wait: Change the wait_exclusive control flow
Purely a preparatory patch; it changes the control flow to match what
will soon be generated by generic code so that that patch can be a
unity transform.
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20131002092528.107994763@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Wed, 2 Oct 2013 09:22:19 +0000 (11:22 +0200)]
sched/wait: Change timeout logic
Commit
4c663cf ("wait: fix false timeouts when using
wait_event_timeout()") introduced an additional condition check after
a timeout but there's a few issues;
- it forgot one site
- it put the check after the main loop; not at the actual timeout
check.
Cure both; by wrapping the condition (as suggested by Oleg), this
avoids double evaluation of 'condition' which could be quite big.
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20131002092528.028892896@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Wed, 2 Oct 2013 09:22:18 +0000 (11:22 +0200)]
sched/wait: Make the signal_pending() checks consistent
There's two patterns to check signals in the __wait_event*() macros:
if (!signal_pending(current)) {
schedule();
continue;
}
ret = -ERESTARTSYS;
break;
And the more natural:
if (signal_pending(current)) {
ret = -ERESTARTSYS;
break;
}
schedule();
Change them all into the latter form.
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20131002092527.956416254@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
David Vrabel [Tue, 1 Oct 2013 18:00:49 +0000 (19:00 +0100)]
xen/hvc: allow xenboot console to be used again
Commit
d0380e6c3c0f6edb986d8798a23acfaf33d5df23 (early_printk:
consolidate random copies of identical code) added in 3.10 introduced
a check for con->index == -1 in early_console_register().
Initialize index to -1 for the xenboot console so earlyprintk=xen
works again.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Cohen [Tue, 1 Oct 2013 21:32:58 +0000 (14:32 -0700)]
usb: chipidea: add Intel Clovertrail pci id
Also clean up the last item of the pci id list to be "cleaner".
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 2 Oct 2013 13:57:51 +0000 (14:57 +0100)]
staging: comedi: ni_65xx: (bug fix) confine insn_bits to one subdevice
The `insn_bits` handler `ni_65xx_dio_insn_bits()` has a `for` loop that
currently writes (optionally) and reads back up to 5 "ports" consisting
of 8 channels each. It reads up to 32 1-bit channels but can only read
and write a whole port at once - it needs to handle up to 5 ports as the
first channel it reads might not be aligned on a port boundary. It
breaks out of the loop early if the next port it handles is beyond the
final port on the card. It also breaks out early on the 5th port in the
loop if the first channel was aligned. Unfortunately, it doesn't check
that the current port it is dealing with belongs to the comedi subdevice
the `insn_bits` handler is acting on. That's a bug.
Redo the `for` loop to terminate after the final port belonging to the
subdevice, changing the loop variable in the process to simplify things
a bit. The `for` loop could now try and handle more than 5 ports if the
subdevice has more than 40 channels, but the test `if (bitshift >= 32)`
ensures it will break out early after 4 or 5 ports (depending on whether
the first channel is aligned on a port boundary). (`bitshift` will be
between -7 and 7 inclusive on the first iteration, increasing by 8 for
each subsequent operation.)
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: <stable@vger.kernel.org> # 3.10.y 3.11.y 3.12.y
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nicholas Bellinger [Thu, 3 Oct 2013 21:03:59 +0000 (14:03 -0700)]
iscsi-target; Allow an extra tag_num / 2 number of percpu_ida tags
This patch bumps the default number of tags allocated per session by
iscsi-target via transport_alloc_session_tags() -> percpu_ida_init()
by another (tag_num / 2).
This is done to take into account the tags waiting to be acknowledged
and released in iscsit_ack_from_expstatsn(), but who's number are not
directly limited by the CmdSN Window queue_depth being enforced by
the target.
Using a larger value here is also useful to prevent percpu_ida_alloc()
from having to steal tags from other CPUs when no tags are available
on the local CPU, while waiting for unacknowledged tags to be released.
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Nicholas Bellinger [Thu, 3 Oct 2013 20:56:14 +0000 (13:56 -0700)]
iscsi-target: Perform release of acknowledged tags from RX context
This patch converts iscsit_ack_from_expstatsn() to populate a local
ack_list of commands, and call iscsit_free_cmd() directly from RX
thread context, instead of using iscsit_add_cmd_to_immediate_queue()
to queue the acknowledged commands to be released from TX thread
context.
It is helpful to release the acknowledge commands as quickly as
possible, along with the associated percpu_ida tags, in order to
prevent percpu_ida_alloc() from having to steal tags from other
CPUs while waiting for iscsit_free_cmd() to happen from TX thread
context.
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Nicholas Bellinger [Thu, 3 Oct 2013 20:37:21 +0000 (13:37 -0700)]
iscsi-target: Only perform wait_for_tasks when performing shutdown
This patch changes transport_generic_free_cmd() to only wait_for_tasks
when shutdown=true is passed to iscsit_free_cmd().
With the advent of >= v3.10 iscsi-target code using se_cmd->cmd_kref,
the extra wait_for_tasks with shutdown=false is unnecessary, and may
end up causing an extra context switch when releasing WRITEs.
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Linus Torvalds [Thu, 3 Oct 2013 15:56:41 +0000 (08:56 -0700)]
Merge git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm NULL deref fix from Gleb Natapov.
* git://git.kernel.org/pub/scm/virt/kvm/kvm:
Fix NULL dereference in gfn_to_hva_prot()
Linus Torvalds [Thu, 3 Oct 2013 15:55:50 +0000 (08:55 -0700)]
Merge branch 'for-curr' of git://git./linux/kernel/git/vgupta/arc
Pull ARC fix from Vineet Gupta:
"Chrisitian found/fixed issue with SA_SIGINFO based signal handler
corrupting the user space registers post after signal handling"
* 'for-curr' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: Fix signal frame management for SA_SIGINFO
Linus Torvalds [Thu, 3 Oct 2013 15:54:39 +0000 (08:54 -0700)]
Merge branch 'merge' of git://git./linux/kernel/git/benh/powerpc
Pull powerpc fixes from Ben Herrenschmidt:
"Here are a few powerpc fixes, all aimed at -stable, found in part
thanks to the ramping up of a major distro testing and in part thanks
to the LE guys hitting all sort interesting corner cases.
The most scary are probably the register clobber issues in
csum_partial_copy_generic(), especially since Anton even had a test
case for that thing, which didn't manage to hit the bugs :-)
Another highlight is that memory hotplug should work again with these
fixes.
Oh and the vio modalias one is worse than the cset implies as it
upsets distro installers, so I've been told at least, which is why I'm
shooting it to stable"
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
powerpc/tm: Switch out userspace PPR and DSCR sooner
powerpc/tm: Turn interrupts hard off in tm_reclaim()
powerpc/perf: Fix handling of FAB events
powerpc/vio: Fix modalias_show return values
powerpc/iommu: Use GFP_KERNEL instead of GFP_ATOMIC in iommu_init_table()
powerpc/sysfs: Disable writing to PURR in guest mode
powerpc: Restore registers on error exit from csum_partial_copy_generic()
powerpc: Fix parameter clobber in csum_partial_copy_generic()
powerpc: Fix memory hotplug with sparse vmemmap
Nicholas Bellinger [Wed, 2 Oct 2013 00:04:40 +0000 (17:04 -0700)]
target: Fail on non zero scsi_status in compare_and_write_callback
This patch addresses a bug for backends such as IBLOCK that perform
asynchronous completion via transport_complete_cmd(), that will call
target_complete_failure_work() -> transport_generic_request_failure(),
upon exception status and invoke cmd->transport_complete_callback()
-> compare_and_write_callback() incorrectly during the failure case.
It adds a check for a non zero se_cmd->scsi_status within the first
invocation of compare_and_write_callback(), and will jump to out plus
up se_device->caw_sem before exiting the callback.
Reported-by: Thomas Glanzmann <thomas@glanzmann.de>
Tested-by: Thomas Glanzmann <thomas@glanzmann.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Nicholas Bellinger [Tue, 1 Oct 2013 23:53:10 +0000 (16:53 -0700)]
target: Fix recursive COMPARE_AND_WRITE callback failure
This patch addresses a bug when compare_and_write_callback() invoked from
target_complete_ok_work() hits an failure from __target_execute_cmd() ->
cmd->execute_cmd(), that ends up calling transport_generic_request_failure()
-> compare_and_write_post(), thus causing SCF_COMPARE_AND_WRITE_POST to
incorrectly be set.
The result of this bug is that target_complete_ok_work() no longer hits
the if (!rc && !(cmd->se_cmd_flags & SCF_COMPARE_AND_WRITE_POST) check
that forces an immediate return, and instead double completes the se_cmd
in question, triggering an OOPs in the process.
This patch changes compare_and_write_post() to only set this bit when a
failure has not already occured to ensure the immediate return from within
target_complete_ok_work(), and thus allow transport_generic_request_failure()
to handle the sending of the CHECK_CONDITION exception status.
Reported-by: Thomas Glanzmann <thomas@glanzmann.de>
Tested-by: Thomas Glanzmann <thomas@glanzmann.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Nicholas Bellinger [Tue, 1 Oct 2013 23:46:37 +0000 (16:46 -0700)]
target: Reset data_length for COMPARE_AND_WRITE to NoLB * block_size
This patch resets se_cmd->data_length for COMPARE_AND_WRITE emulation
within sbc_compare_and_write() to NoLB * block_size in order to address
a bug with FILEIO backends where a I/O failure will occur when data_length
does not match the I/O size being actually dispatched for the individual
per block READs + WRITEs.
This is done late enough in sbc_compare_and_write() after the memory
allocations have occured in transport_generic_new_cmd() to not cause
any unwanted side-effects.
Reported-by: Thomas Glanzmann <thomas@glanzmann.de>
Tested-by: Thomas Glanzmann <thomas@glanzmann.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Jack Wang [Mon, 30 Sep 2013 08:09:05 +0000 (10:09 +0200)]
ib_srpt: always set response for task management
The SRP specification requires:
"Response data shall be provided in any SRP_RSP response that is sent in
response to an SRP_TSK_MGMT request (see 6.7). The information in the
RSP_CODE field (see table 24) shall indicate the completion status of
the task management function."
So fix this to avoid the SRP initiator interprets task management functions
that succeeded as failed.
Signed-off-by: Jack Wang <jinpu.wang@profitbricks.com>
Cc: stable@vger.kernel.org # 3.3+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Michael Neuling [Thu, 26 Sep 2013 03:29:09 +0000 (13:29 +1000)]
powerpc/tm: Switch out userspace PPR and DSCR sooner
When we do a treclaim or trecheckpoint we end up running with userspace
PPR and DSCR values. Currently we don't do anything special to avoid
running with user values which could cause a severe performance
degradation.
This patch moves the PPR and DSCR save and restore around treclaim and
trecheckpoint so that we run with user values for a much shorter period.
More care is taken with the PPR as it's impact is greater than the DSCR.
This is similar to user exceptions, where we run HTM_MEDIUM early to
ensure that we don't run with a userspace PPR values in the kernel.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Cc: <stable@vger.kernel.org> # 3.9+
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Michael Neuling [Wed, 2 Oct 2013 07:15:15 +0000 (17:15 +1000)]
powerpc/tm: Turn interrupts hard off in tm_reclaim()
We can't take IRQs in tm_reclaim as we might have a bogus r13 and r1.
This turns IRQs hard off in this function.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Cc: <stable@vger.kernel.org> # 3.9+
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Michael Ellerman [Wed, 2 Oct 2013 08:04:06 +0000 (18:04 +1000)]
powerpc/perf: Fix handling of FAB events
Commit
4df4899 "Add power8 EBB support" included a bug in the handling
of the FAB_CRESP_MATCH and FAB_TYPE_MATCH fields.
These values are pulled out of the event code using EVENT_THR_CTL_SHIFT,
however we were then or'ing that value directly into MMCR1.
This meant we were failing to set the FAB fields correctly, and also
potentially corrupting the value for PMC4SEL. Leading to no counts for
the FAB events and incorrect counts for PMC4.
The fix is simply to shift left the FAB value correctly before or'ing it
with MMCR1.
Reported-by: Sooraj Ravindran Nair <soonair3@in.ibm.com>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Cc: <stable@vger.kernel.org> # 3.10+
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Prarit Bhargava [Mon, 23 Sep 2013 13:33:36 +0000 (09:33 -0400)]
powerpc/vio: Fix modalias_show return values
modalias_show() should return an empty string on error, not -ENODEV.
This causes the following false and annoying error:
> find /sys/devices -name modalias -print0 | xargs -0 cat >/dev/null
cat: /sys/devices/vio/4000/modalias: No such device
cat: /sys/devices/vio/4001/modalias: No such device
cat: /sys/devices/vio/4002/modalias: No such device
cat: /sys/devices/vio/4004/modalias: No such device
cat: /sys/devices/vio/modalias: No such device
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: <stable@vger.kernel.org>
Nishanth Aravamudan [Tue, 1 Oct 2013 21:04:53 +0000 (14:04 -0700)]
powerpc/iommu: Use GFP_KERNEL instead of GFP_ATOMIC in iommu_init_table()
Under heavy (DLPAR?) stress, we tripped this panic() in
arch/powerpc/kernel/iommu.c::iommu_init_table():
page = alloc_pages_node(nid, GFP_ATOMIC, get_order(sz));
if (!page)
panic("iommu_init_table: Can't allocate %ld bytes\n", sz);
Before the panic() we got a page allocation failure for an order-2
allocation. There appears to be memory free, but perhaps not in the
ATOMIC context. I looked through all the call-sites of
iommu_init_table() and didn't see any obvious reason to need an ATOMIC
allocation. Most call-sites in fact have an explicit GFP_KERNEL
allocation shortly before the call to iommu_init_table(), indicating we
are not in an atomic context. There is some indirection for some paths,
but I didn't see any locks indicating that GFP_KERNEL is inappropriate.
With this change under the same conditions, we have not been able to
reproduce the panic.
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: <stable@vger.kernel.org>
Madhavan Srinivasan [Tue, 1 Oct 2013 19:04:10 +0000 (00:34 +0530)]
powerpc/sysfs: Disable writing to PURR in guest mode
arch/powerpc/kernel/sysfs.c exports PURR with write permission.
This may be valid for kernel in phyp mode. But writing to
the file in guest mode causes crash due to a priviledge violation
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: <stable@vger.kernel.org>
Paul E. McKenney [Tue, 1 Oct 2013 07:11:35 +0000 (17:11 +1000)]
powerpc: Restore registers on error exit from csum_partial_copy_generic()
The csum_partial_copy_generic() function saves the PowerPC non-volatile
r14, r15, and r16 registers for the main checksum-and-copy loop.
Unfortunately, it fails to restore them upon error exit from this loop,
which results in silent corruption of these registers in the presumably
rare event of an access exception within that loop.
This commit therefore restores these register on error exit from the loop.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Paul E. McKenney [Tue, 1 Oct 2013 06:54:05 +0000 (16:54 +1000)]
powerpc: Fix parameter clobber in csum_partial_copy_generic()
The csum_partial_copy_generic() uses register r7 to adjust the remaining
bytes to process. Unfortunately, r7 also holds a parameter, namely the
address of the flag to set in case of access exceptions while reading
the source buffer. Lacking a quantum implementation of PowerPC, this
commit instead uses register r9 to do the adjusting, leaving r7's
pointer uncorrupted.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Nathan Fontenot [Fri, 27 Sep 2013 15:18:09 +0000 (10:18 -0500)]
powerpc: Fix memory hotplug with sparse vmemmap
Previous commit
46723bfa540... introduced a new config option
HAVE_BOOTMEM_INFO_NODE that ended up breaking memory hot-remove for ppc
when sparse vmemmap is not defined.
This patch defines HAVE_BOOTMEM_INFO_NODE for ppc and adds the call to
register_page_bootmem_info_node. Without this we get a BUG_ON for memory
hot remove in put_page_bootmem().
This also adds a stub for register_page_bootmem_memmap to allow ppc to build
with sparse vmemmap defined. Leaving this as a stub is fine since the same
vmemmap addresses are also handled in vmemmap_populate and as such are
properly mapped.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: <stable@vger.kernel.org> [v3.9+]
Gleb Natapov [Tue, 1 Oct 2013 16:58:36 +0000 (19:58 +0300)]
Fix NULL dereference in gfn_to_hva_prot()
gfn_to_memslot() can return NULL or invalid slot. We need to check slot
validity before accessing it.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
David Herrmann [Wed, 2 Oct 2013 14:41:04 +0000 (16:41 +0200)]
x86/simplefb: Mark framebuffer mem-resources as IORESOURCE_BUSY to avoid bootup warning
IORESOURCE_BUSY is used to mark temporary driver mem-resources
instead of global regions. This suppresses warnings if regions
overlap with a region marked as BUSY.
This was always the case for VESA/VGA/EFI framebuffer regions so
do the same for simplefb regions. The reason we do this is to
allow device handover to real GPU drivers like
i915/radeon/nouveau which get the same regions via PCI BARs.
Maybe at some point we will be able to unregister platform
devices properly during the handover. In this case the simplefb
region would get removed before the new region is created.
However, this is currently not the case and would require rather
huge changes in remove_conflicting_framebuffers(). Add the BUSY
marker now and try to eventually rewrite the handover for a next release.
Also see kernel/resource.c for more information:
/*
* if a resource is "BUSY", it's not a hardware resource
* but a driver mapping of such a resource; we don't want
* to warn for those; some drivers legitimately map only
* partial hardware resources. (example: vesafb)
*/
This suppresses warnings like:
------------[ cut here ]------------
WARNING: CPU: 2 PID: 199 at arch/x86/mm/ioremap.c:171 __ioremap_caller+0x2e3/0x390()
Info: mapping multiple BARs. Your kernel is fine.
Call Trace:
dump_stack+0x54/0x8d
warn_slowpath_common+0x7d/0xa0
warn_slowpath_fmt+0x4c/0x50
iomem_map_sanity_check+0xac/0xe0
__ioremap_caller+0x2e3/0x390
ioremap_wc+0x32/0x40
i915_driver_load+0x670/0xf50 [i915]
...
Reported-by: Tom Gundersen <teg@jklm.no>
Tested-by: Tom Gundersen <teg@jklm.no>
Tested-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Link: http://lkml.kernel.org/r/1380724864-1757-1-git-send-email-dh.herrmann@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Linus Torvalds [Thu, 3 Oct 2013 04:48:32 +0000 (21:48 -0700)]
Merge tag 'fixes-for-linus' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"We have a fairly large batch of fixes this time around, mostly just
due to various platforms all having a fix or two more than usual.
Worth pointing out are:
- A fix for EDMA on Davinci/OMAP where channel allocation broke with
the DT conversion. Due to some miscommunication we didn't
understand the impact of the breakage, so we were pushing back on
it for 3.12, but it sounds like it's actually breaking quite a few
people out there.
- A bunch of fixes for Marvell platforms, some straggling fixes for
merge window fallout and some fixes for a couple of the platforms
(Netgear RN102 in particular).
- A fix for a race between multi-cluster power management and cpu
hotplug on Versatile Express.
And a bunch of other smaller fixes that all add up.
We'll be switching over into stricter regressions-only mode from here
on out"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (31 commits)
ARM: multi_v7_defconfig: add SDHCI for i.MX
bus: mvebu-mbus: Fix optional pcie-mem/io-aperture properties
ARM: mvebu: add missing DT Mbus ranges and relocate PCIe DT nodes for RN102
ARM: at91: sam9g45: shutdown ddr1 too when rebooting
MAINTAINERS: ARM: SIRF: use kernel.org mail box
MAINTAINERS: ARM: SIRF: add missed drivers into maintain list
ARM: edma: Fix clearing of unused list for DT DMA resources
ARM: vexpress: tc2: fix hotplug/idle/kexec race on cluster power down
ARM: dts: sirf: fix interrupt and dma prop of VIP for prima2 and atlas6
ARM: dts: sirf: fix the ranges of peri-iobrg of prima2
ARM: dts: makefile: build atlas6-evb.dtb for ARCH_ATLAS6
ARM: dts: sirf: fix fifosize, clks, dma channels for UART
ARM: mvebu: Add DT entry for ReadyNAS 102 to use gpio-poweroff driver
ARM: mvebu: fix ReadyNAS 102 Power button GPIO to make it active high
ARM: mach-integrator: Add stub for pci_v3_early_init() for !CONFIG_PCI
ARM: shmobile: Remove #gpio-ranges-cells DT property
gpio: rcar: Remove #gpio-range-cells DT property usage
ARM: shmobile: armadillo: fixup ether pinctrl naming
ARM: shmobile: Lager: add Micrel KSZ8041 PHY fixup
ARM: shmobile: update SDHI DT compatibility string to the <unit>-<soc> format
...
Christian Ruppert [Wed, 2 Oct 2013 09:13:38 +0000 (11:13 +0200)]
ARC: Fix signal frame management for SA_SIGINFO
Previously, when a signal was registered with SA_SIGINFO, parameters 2
and 3 of the signal handler were written to registers r1 and r2 before
the register set was saved. This led to corruption of these two
registers after returning from the signal handler (the wrong values were
restored).
With this patch, registers are now saved before any parameters are
passed, thus maintaining the processor state from before signal entry.
Signed-off-by: Christian Ruppert <christian.ruppert@abilis.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Linus Torvalds [Thu, 3 Oct 2013 03:58:33 +0000 (20:58 -0700)]
Merge git://git./linux/kernel/git/davem/sparc
Pull sparc fixes from David Miller:
"Couple of small bug fixes:
1) strlcpy in ldom_reboot() is still not quite right, use sprintf
instead from Kees Cook.
2) Generic hugetlb interface pte checks should use the widest return
type, otherwise high bits can get chopped off.
3) Fix build with PCI MSI enabled on 32-bit sparc"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc: fix MSI build failure on Sparc32
sparc: remove deprecated IRQF_DISABLED
mm: Fix generic hugetlb pte check return type.
sparc: fix ldom_reboot buffer overflow harder
Olof Johansson [Thu, 3 Oct 2013 03:55:05 +0000 (20:55 -0700)]
Merge tag 'fixes-3.12-2' of git://git.infradead.org/linux-mvebu into fixes
From Jason Cooper:
mvebu fixes for v3.12 (round 2)
- mvebu
- fix ReadyNAS 102 power button (needs to be active high)
- fix ReadyNAS 102 automated rebooting (prevent hang) by add gpio-poweroff
node
- fix booting ReadyNAS 102 by adding MBus ranges and PCIe DT nodes
- mvebu-mbus: prevent PCIe driver from continuing with corrupted resource
* tag 'fixes-3.12-2' of git://git.infradead.org/linux-mvebu:
bus: mvebu-mbus: Fix optional pcie-mem/io-aperture properties
ARM: mvebu: add missing DT Mbus ranges and relocate PCIe DT nodes for RN102
ARM: mvebu: Add DT entry for ReadyNAS 102 to use gpio-poweroff driver
ARM: mvebu: fix ReadyNAS 102 Power button GPIO to make it active high
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Mon, 30 Sep 2013 00:34:45 +0000 (17:34 -0700)]
ARM: multi_v7_defconfig: add SDHCI for i.MX
Turn on SDHCI for i.MX support so machines can boot with local rootfs
on SD. Tested on a Wandboard Quad.
Signed-off-by: Olof Johansson <olof@lixom.net>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Thomas Petazzoni [Wed, 11 Sep 2013 10:32:05 +0000 (12:32 +0200)]
sparc: fix MSI build failure on Sparc32
Commit
ebd97be635 ('PCI: remove ARCH_SUPPORTS_MSI kconfig option')
removes the ARCH_SUPPORTS_MSI Kconfig option that allowed
architectures to indicate whether they support PCI MSI or not. Now,
PCI MSI support can be compiled in on any architecture thanks to the
use of weak functions thanks to
4287d824f265 ('PCI: use weak functions
for MSI arch-specific functions').
So, architecture specific code is now responsible to ensure that its
PCI MSI code builds in all cases, or be appropriately conditionally
compiled.
On Sparc, the MSI support is only provided for Sparc64, so the
ARCH_SUPPORTS_MSI kconfig option was only selected for SPARC64, and
not for the Sparc architecture as a whole. Therefore, removing
ARCH_SUPPORTS_MSI broke Sparc32 configurations with CONFIG_PCI_MSI=y,
because the Sparc-specific MSI code is not designed to be built on
Sparc32.
To solve this, this commit ensures that the Sparc MSI code is only
built on Sparc64. This is done thanks to a new Kconfig Makefile helper
option SPARC64_PCI_MSI, modeled after the existing SPARC64_PCI. The
SPARC64_PCI_MSI option is an hidden option that is true when both
Sparc64 PCI support is enabled and MSI is enabled. The
arch/sparc/kernel/pci_msi.c file is now only built when
SPARC64_PCI_MSI is true.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Opdenacker [Sat, 7 Sep 2013 07:38:09 +0000 (09:38 +0200)]
sparc: remove deprecated IRQF_DISABLED
This patch proposes to remove the IRQF_DISABLED flag from sparc architecture
code. It's a NOOP since 2.6.35 and it will be removed one day.
Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Miller [Wed, 2 Oct 2013 18:25:09 +0000 (14:25 -0400)]
mm: Fix generic hugetlb pte check return type.
The include/asm-generic/hugetlb.h stubs that just vector huge_pte_*()
calls to the pte_*() implementations won't work in certain situations.
x86 and sparc, for example, return "unsigned long" from the bit
checks, and just go "return pte_val(pte) & PTE_BIT_FOO;"
But since huge_pte_*() returns 'int', if any high bits on 64-bit are
relevant, they get chopped off.
The net effect is that we can loop forever trying to COW a huge page,
because the huge_pte_write() check signals false all the time.
Reported-by: Gurudas Pai <gurudas.pai@oracle.com>
Tested-by: Gurudas Pai <gurudas.pai@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: David Rientjes <rientjes@google.com>
Kees Cook [Wed, 2 Oct 2013 05:13:34 +0000 (22:13 -0700)]
sparc: fix ldom_reboot buffer overflow harder
The length argument to strlcpy was still wrong. It could overflow the end of
full_boot_str by 5 bytes. Instead of strcat and strlcpy, just use snprint.
Reported-by: Brad Spengler <spender@grsecurity.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
projects / linux-2.6-microblaze.git / log