drm/amd/powerplay: Enable SOCCLK ULV for sienna_cichlid

Enable FW DSTATE for sienna_cichlid.
Enable DF CSTATE for sienna_cichlid.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: make gfx ds can be configure for sienna_cichlid

Make GFX deep sleep can be configure for sienna_cichlid.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/powerplay: set UCLK DPM for sienna_cichlid

Enable uclk dpm for sienna_cichlid.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/powerplay: set Thermal control for sienna_cichlid

Enable Auto Thermal Throttling for sienna_cichlid.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: enable SOC Clock Deep Sleep for sienna_cichlid

Enable System On Chip Clock Deep Sleep for sienna_cichlid.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: enable Graphics Clock Deep Sleep for sienna_cichlid

Enable Graphics Clock Deep Sleep for sienna_cichlid.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: enable Ultra Low Voltage for sienna_cichlid

Support Ultra Low Voltage for sienna_cichlid.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: set FCLK DPM for sienna_cichlid

Support for FCLK DPM for sienna_cichlid.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: set SOCCLK DPM for sienna_cichlid

Support for SOCCLK DPM for sienna_cichlid.
Use feature mask to control DPM for sienna_cichlid.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: add support to set performance level for sienna_cichlid

Support for performance level set for sienna_cichlid.
Set standard performance level not fully support, will set to auto
performance level.
Set peak performance level not fully support, will do nothing with it.
Force clk level only support for 2 level for fine grained DPM.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/powerplay: add initial swSMU support for sienna_cichlid (v2)

SMU11 based similar to navi1x.

v2: squash in SMU IF updates

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add virtual display support for sienna_cichlid

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx10: change register configure for sienna_cichlid

Update sienna_cichlid register configuration for sienna_cichlid
to match the update of header files.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: correct SDMA3 IH clinet id for sienna_cichlid

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add sdma ip block for sienna_cichlid (v5)

Sienna_Cichlid have 4 sdma controllers.

v2: add missing license to sdma_common.h (Alex)
v3: rebase (Alex)
v4: squash in policy fix (Alex)
v4: squash in fw_name fix

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add sdma2 and sdma3 irqsrc header files for sienna_cichlid (v2)

Add irq src headers for additional SDMA blocks.

v2: Add missing licenses (Alex)

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add gfx ip block for sienna_cichlid (v3)

Add support for GC 10.3.

v2: Squash in gb_addr_config fix (Alex)
v3: Add num_pkrs support (Alex)

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add ih ip block for sienna_cichlid

Update IH handling for sienna_cichlid

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add gmc ip block for sienna_cichlid

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add support gfxhub for sienna_cichlid (v3)

GFX10.3 is used for sienna_cichlid.

v2: squash in BANK_SELECT and FRAGMENT_SIZE fixes (Alex)
v3: squash in smallk update (Alex)

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add support on mmhub for sienna_cichlid

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/soc15: add common ip block for sienna_cichlid

Add common ip block for sienna_cichlid.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: initialize IP offset for sienna_cichlid (v2)

Add IP offset headers and state.

V2: squash in updates (Alex)

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/soc15: add support for sienna_cichlid

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx10: add clockgating support for sienna_cichlid

Same as navi10.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gmc10: add sienna_cichlid support

Same as navi10.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx10: add support for sienna_cichlid firmware

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: set asic family and ip blocks for sienna_cichlid

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: set fw load type for sienna_cichlid

Same as Navi1x.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add sienna_cichlid gpu info firmware v2

gpu info fw contains chip specific parameters.

v2: fix fw_name

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add sienna_cichlid asic type

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add dcn30 Headers (v2)

DCN 3.0 display controller registers

v2: squash in updates from Bhawan.

Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add VCN3.0 register headers (v2)

Sienna_Cichlid VCN headers

v2: squash in updates (Alex)

Signed-off-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add ATHUB 2.1 header files (v2)

v2: squash in updates (Alex)

Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add GC 10.3 header files (v2)

Add GC10.3 related header files.

v2: squash in updates (Alex)

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: restrict bo mapping within gpu address limits

Have strict check on bo mapping since on some systems, such as A+A or
hybrid, the cpu might support 5 level paging or can address memory above
48 bits but gpu might be limited by hardware to just use 48 bits. In
general, this applies to all asics where this limitation can be checked
against their max_pfn range. This restricts the range to map bo within
pratical limits of cpu and gpu for shared virtual memory access.

Reviewed-by: Oak Zeng <oak.zeng@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add unique_id and serial_number for Arcturus v3

Add support for unique_id and serial_number, as these are now
the same value, and will be for future ASICs as well.

v2: Explicitly create unique_id only for VG10/20/ARC
v3: Change set_unique_id to get_unique_id for clarity

Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add ReadSerial defines for Arcturus

Add the ReadSerial definitions for Arcturus to the arcturus_ppsmc.h
header for use with unique_id

Unrevert: Supported in SMU 54.23, update values to match SMU spec

Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove useless code in RAS

Module parameter amdgpu_ras_mask has been involved in
the calculation of ras support capability, so drop this
redundant code.

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix RAS memory leak in error case

RAS context memory needs to freed in failure case.

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/fru: fix header guard and include header

Fix the fru eeprom header guard and include it in the .c file.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/nv: enable init reset check

gpu reset is implemented for navi so we can enable this.

Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/nv: remove some dead code

navi never supported the pci config reset.  Neither did
vega.

Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/nv: allow access to SDMA status registers

For access via ioctl for tools like umr and mesa.

Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: use IP discovery table for renoir

Rather than relying on gpu info firmware.

Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: clean up discovery testing

Rather than checking of the variable is enabled and the
chip is the right family check for the presence of the
discovery table.

Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: skip gpu_info firmware if discovery info is available

The GPU info firmware is only applicable at bring up when the
IP discovery table is not present.  If it's available, use that
first and then fallback to parsing the gpu info firmware.

Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: give better names for the thermal IRQ related APIs

Thermal control is performed by PMFW. What handled in driver is
just whether or not to enable the alert(to driver).

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: use the common APIs for IRQ disablement/enablement

Also the new logics for MP1 SW IRQs disablement/enablement are added.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: stop thermal IRQs on suspend

Added missing thermal IRQs disablement on suspend.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: added a sysfs interface for thermal throttling related V4

User can check and set the enablement of throttling logging and
the interval between each logging.

V2: simplify the sysfs interface(no string parsing)
V3: add proper lock protection on updating throttling_logging_rs.interval
V4: documentation cosmetic per Luben's suggestion

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: enable thermal throttling logging support V2

Currently this feature is supported on Arcturus only. PMFW will
interrupt driver the first time when thermal throttling happened
and every one second afterwards if the throttling continuing. On
receiving the 1st interrupt, driver logs it the first time. However,
if the throttling continues, the logging will be performed every
minute to avoid log flooding.

V2: simplify the implemention by ratelimited printk

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: implement ASIC specific thermal throttling logging

Enable this for Arcturus only for now.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: update Arcturus smu-driver headers

To fit the latest 54.24.0 PMFW.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: ack the SMUToHost interrupt on receive V2

There will be no further interrupt without proper ack
for current one.

V2: fix typo to really set ACK bit only

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: fix a dereference of pdd before it is null checked

Currently pointer pdd is being dereferenced when assigning pointer
dpm and then pdd is being null checked.  Fix this by checking if
pdd is null before the dereference of pdd occurs.

Addresses-Coverity: ("Dereference before null check")
Fixes: 32cb59f31362 ("drm/amdkfd: Track SDMA utilization per process")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/pm: return an error during GPU reset or suspend (v2)

Return an error for sysfs and debugfs power interfaces during
gpu reset and suspend.  Prevents access to the hw while it may
be in an unusable state.

v2: squash in fix to drop suspend check

Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gmc10: program the smallK fragment size

Explicitly set the smallk size to 0 (4k).  This is the hw
default, but set it anyway just in case something else
changed it.

Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amd/display: disable dcn20 abm feature for bring up"

This reverts commit 96cb7cf13d8530099c256c053648ad576588c387.

This change was used for DCN2 bringup and is no longer desired.
In fact it breaks backlight on DCN2 systems.

Cc: Alexander Monakov <amonakov@ispras.ru>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Anthony Koo <Anthony.Koo@amd.com>
Cc: Michael Chiu <Michael.Chiu@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reported-and-tested-by: Alexander Monakov <amonakov@ispras.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Fix GCC 10 compiler warning

GCC 10 was complaining about how we append data to a buffer using snprintf:

drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_topology.c: In function ‘perf_show’:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_topology.c:214:3: warning: ‘snprintf’ argument 4 overlaps destination object ‘buf’ [-Wrestrict]
  214 |   snprintf(buffer, PAGE_SIZE, "%s"fmt, buffer, __VA_ARGS__)
      |   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

This patch fixes the warnings and makes the sysfs code more efficient
by remembering the offset in the buffer between append operations.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Aaron Liu <aaron.liu@amd.com>
Tested-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Amber Lin <Amber.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: Fix the CGCG setting is overwritten for SRIOV.

For SRIOV, since the CP_INT_CNTL_RING0 is programed on host side.
The Guest should not program CP_INT_CNTL_RING0 again.

Signed-off-by: Gavin Wan <Gavin.Wan@amd.com>
Reviewed-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.87

Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Don't compare same stream for synchronized vblank

[Why]
When determining synchronzied vblank we don't need to compare the stream
with itself

[How]
If comparing same stream, continue to next iteration

Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: [FW Promotion] Release 1.0.12

[Header Changes]
  - Combine all interface dependencies between driver and fw into a
    single header file
  - Add FW Versioning to the dmub_cmd.h file

Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: enable plane if container of plane_status changed

[why]
We hit an issue which driver reallocate a pipe from desktop bottom
pipe to video bottom pipe. In this case, driver need to re-enable
plane.

[how]
Enable plane if container of plane status changed.

Signed-off-by: Hugo Hu <hugo.hu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: combine public interfaces into single header

[Why]
We want to better encapsulate all driver-fw dependencies into a single
file.

[How]
Combine all the headers under inc folder into a single header

Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Allow Diagnostics test with eDP not connected

[Why]
Diagnostics DIO test with eDP not connected is required to run

[How]
Allow Diagnostics test with eDP not connected to skip link detection but
still execute DIO test

Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: unit show garbage when do OPTC blank

[Why]
Unit enter to S4, garbage show on screen when do OPTC blank.

[How]
Wait for vblank then do OPTC blank

Signed-off-by: Paul Hsieh <paul.hsieh@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Guard against invalid array access

[Why]
There are scenarios where no OPP is assigned to an OTG so its value is
0xF which is outside the size of the OPP array causing a potential
driver crash.

[How]
Change the assert to an early return to guard against access.  If
there's no OPP assigned already, then OTG will be blank anyways so no
functionality should be lost.

Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Zhan Liu <Zhan.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Disable PG on NV12

[Why]
HW team request to disable PG on NV12 (fixing missed cases)

[How]
Disable dpp and hubp PG

Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Increase Default Sizes of FW State and Trace Buffer

[WHY]
To facilitate DM removing the dependency between dc and the firmware
binary.

[HOW]
Setting the default values to match VBIOS: 64 KB. These values are only
used if meta is absent.

Signed-off-by: David Galiffi <David.Galiffi@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Handle link loss interrupt better

[Why]
Link loss currently only retrains and re-enables the stream.  This can
cause issues for some sinks.

[How]
When link loss occurs, the link and stream(s) should be completely
disabled and then reenabled.

Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: simplify dml log2 function

Current implementation is slightly inaccurate and will often
result in truncation/floor operation decrementing an exact
integer output by 1.

Only rounded down output is ever expected, just extract the fp
exponent for this to increase performance and avoid any
truncation issues.

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix incorrect HDCP caps for dongle

[Why]
Previously we used link signal type to get the caps. We should use the
sink signal type

[How]
Use sink signal type instead of link signal type

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: link_status not align when power off encoder

[Why]
The link_status is incorrect cause driver power off eDP when backlight
on. Some eDP panels may show garbage on screen.

[How]
Correct link_status when power off encoder

Signed-off-by: Paul Hsieh <paul.hsieh@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.86

Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Improve the MTYPE comments

Use words insteads of acronyms for better understanding.

Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Track SDMA utilization per process

Track SDMA usage on a per process basis and report it through sysfs.
The value in the sysfs file indicates the amount of time SDMA has
been in-use by this process since the creation of the process.
This value is in microsecond granularity.

Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: add check before i2c_add_adapter

smu_i2c_eeprom_init may be invoked twice or more
under sroiv mode, while we don't want to add check
if (!amdgpu_sriov_vf) before we invoke smu_i2c_eeprom_init/fini
each time, so we check if i2c adapter is already added
before we invoke i2c_add_adapter

Signed-off-by: Wenhui Sheng <Wenhui.Sheng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: remove SRIOV check in SMU11 (v2)

We don't need SRIOV check after we enable SMC msg filter in SMU11

v2: squash in unused variable fix, unused ids

Signed-off-by: Wenhui Sheng <Wenhui.Sheng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: enable SMC message filter

1. enable SMC message filter in SRIOV situation
2. return -EACCESS if msg is blocked from smu_msg_get_index
3. if msg is block, always return 0 from smu_v11_0_send_msg_with_param

Signed-off-by: Wenhui Sheng <Wenhui.Sheng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: add SMC message filter for SMU11

1. add smu_11_0_msg_mapping definition
2. add valid info for each SMC message in SRIOV

Signed-off-by: Wenhui Sheng <Wenhui.Sheng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: check whether SMU IP is enabled before access

Since on early phase of bringup, the SMU IP may be not enabled or
supported. Without this, we may hit null pointer dereference on
accessing smu->adev.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Yong Zhao <Yong.Zhao@amd.com>
Tested-by: Yong Zhao <Yong.Zhao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Make BREAK_TO_DEBUGGER() a debug print

[Why]
Warnings in the kernel are generally treated as errors.

The BREAK_TO_DEBUGGER macro is not a critical error or warning, but
rather intended for developer use to help investigate behavior and
sequences for other issues.

We do still make use of DC_ERROR/ASSERT(0) in various places in the
code for things that are genuine issues.

Since most developers don't actually KGDB while debugging the kernel
these essentially would have no value on their own since the KGDB
breakpoint wouldn't trigger - ASSERT(0) was used as a shortcut to get
a stacktrace.

[How]
Turn it into a DRM_DEBUG_DRIVER print instead. We unfortunately lose
the stacktrace, but we still do retain some of the useful debug
information this offers by having at least the function and line
number loggable.

If KGDB is supported in the kernel this will still trigger a real
breakpoint as well.

Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/[radeon|amdgpu]: Replace one-element array and use struct_size() helper

The current codebase makes use of one-element arrays in the following
form:

struct something {
    int length;
    u8 data[1];
};

struct something *instance;

instance = kmalloc(sizeof(*instance) + size, GFP_KERNEL);
instance->length = size;
memcpy(instance->data, source, size);

but the preferred mechanism to declare variable-length types such as
these ones is a flexible array member[1][2], introduced in C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on. So, replace
the one-element array with a flexible-array member.

Also, make use of the new struct_size() helper to properly calculate the
size of struct SISLANDS_SMC_SWSTATE.

This issue was found with the help of Coccinelle and, audited and fixed
_manually_.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour")

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm: Replace one-element array and use struct_size() helper

The current codebase makes use of one-element arrays in the following
form:

struct something {
    int length;
    u8 data[1];
};

struct something *instance;

instance = kmalloc(sizeof(*instance) + size, GFP_KERNEL);
instance->length = size;
memcpy(instance->data, source, size);

but the preferred mechanism to declare variable-length types such as
these ones is a flexible array member[1][2], introduced in C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on. So, replace
the one-element array with a flexible-array member.

Also, make use of the new struct_size() helper to properly calculate the
size of struct NISLANDS_SMC_SWSTATE.

This issue was found with the help of Coccinelle and, audited and fixed
_manually_.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour")

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: put some case statments in family order

SI and CIK came before VI and newer asics.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/sdma4: simplify the logic around powering up sdma

Just check if it's an APU.  The checks for the ppfuncs are
pointless because if we don't have them we can't power up
sdma anyway so we shouldn't even be in this code in the first
place.  I'm not sure about the in_gpu_reset check.  This
probably needs to be double checked.  The fini logic doesn't
match the init logic however with that in_gpu_reset check
in place which seems odd.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: simplify mec2 fw check

Check if mec2 fw exists rather than checking asic types.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: simplify CZ/ST and KV/KB/ML checks

Just check for APU.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: simplify raven and renoir checks

Just check for APU.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx10: add navi12 to gfxoff case

Looks like it should be handled here as well.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/sdma4: add renoir to powergating setup

Looks like renoir should be handled here as well.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: simplify ATIF backlight handling

Just register the a pointer to the backlight device and use
that. Unifies the DC and non-DC handling.

Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: disable AGP by default

Always use the PCI GART instead. We just have to many cases
where AGP still causes problems. This means a performance
regression for some GPUs, but also a bug fix for some others.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: print warning when input address is invalid

This will assist debug in error injection case.

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: skip smu_i2c_eeprom_init/fini under sriov mode

When smu_i2c_eeprom_init is called on the smu resuming process
under sroiv mode, there will be a call trace:
[  436.377690]  dump_stack+0x63/0x85
[  436.377695]  kobject_init+0x77/0x90
[  436.377704]  device_initialize+0x28/0x110
[  436.377708]  device_register+0x12/0x20
[  436.377756]  i2c_register_adapter+0xeb/0x400
[  436.377763]  i2c_add_adapter+0x5a/0x80
[  436.377951]  arcturus_i2c_eeprom_control_init+0x60/0x80 [amdgpu]
[  436.378123]  smu_resume+0xcc/0x110 [amdgpu]
[  436.378247]  amdgpu_device_gpu_recover+0xfb1/0xfc0 [amdgpu]
[  436.378401]  amdgpu_job_timedout+0xf2/0x150 [amdgpu]
[  436.378414]  drm_sched_job_timedout+0x70/0xc0 [amd_sched]
[  436.378420]  ? drm_sched_job_timedout+0x70/0xc0 [amd_sched]
[  436.378430]  process_one_work+0x1fd/0x3f0
[  436.378438]  worker_thread+0x34/0x410
[  436.378444]  kthread+0x121/0x140
[  436.378451]  ? process_one_work+0x3f0/0x3f0
[  436.378456]  ? kthread_create_worker_on_cpu+0x70/0x70
[  436.378464]  ret_from_fork+0x35/0x40

This is because smu_i2c_eeprom is not released on gpu recovering.
Actually, smu_i2c_eeprom_init/fini are only needed under bare
mental mode.

Signed-off-by: Hua Zhang <hua.zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: remove the support of vega20 from swsmu

by default, vega20 will use legacy powerplay driver.
in order to maintain the code conveniently in the future,
remove the support of vega20 from swsmu.

Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: remove the support of xgmi pstate on vega20 from swsmu

the vega20 asic uses legacy powerplay driver by default.

1. cleanup is_support_sw_smu_xgmi() function.
(only use for vega20 xgmi pstate check)
2. by default, the vega20 set xgmi pstate by legacy powerplay routine.

Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: change memory training to common function

Change memory training init and finit a common function, as it only have
software behavior do not relay on the IP version of PSP.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>