linux-2.6-microblaze.git
12 years agoASoC: core: Fix check before defaulting to regmap
Mark Brown [Wed, 1 Aug 2012 19:05:47 +0000 (20:05 +0100)]
ASoC: core: Fix check before defaulting to regmap

Check if the chip has provided a write operation (which is mandatory for
I/O) rather than looking for control data as some of the MFDs use a global
for this. Also skip the attempt if there's no regmap available by device
in case things get confused by the attempt to default.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
12 years agoASoC: wm8962: Allow VMID time to fully ramp
Mark Brown [Mon, 30 Jul 2012 17:24:19 +0000 (18:24 +0100)]
ASoC: wm8962: Allow VMID time to fully ramp

Required for reliable power up from cold.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org
12 years agoASoC: AC97 doesn't use regmap by default
Manuel Lauss [Tue, 31 Jul 2012 12:42:27 +0000 (14:42 +0200)]
ASoC: AC97 doesn't use regmap by default

Since commit 38cbf9598feba97de9f9b43efa9153fd7c1a2ec9
("ASoC: core: Try to use regmap if the driver doesn't set up any I/O")
any ASoC codec which doesn't set codec::control_data is assumed
to use regmap.  That doesn't work with AC97 so this workaround
sets the codec::control_data member to a random value to restore
proper behaviour.

Tested with WM9712.

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: sgtl5000: enable VAG_POWER for LINE_IN
Dong Aisheng [Fri, 27 Jul 2012 11:18:42 +0000 (19:18 +0800)]
ASoC: sgtl5000: enable VAG_POWER for LINE_IN

LINE_IN also needs VAG_POWER on or we may hear noise when directly
route LINE_IN to Headphone Mux.
Tested on imx28evk.

Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: ab8500: Inform SoC Core that we have our own I/O arrangements
Lee Jones [Tue, 31 Jul 2012 14:45:41 +0000 (15:45 +0100)]
ASoC: ab8500: Inform SoC Core that we have our own I/O arrangements

If codec->control_data is not populated SoC Core assumes we want to
use regmap, which fails catastrophically, as we don't have one:

Unable to handle kernel NULL pointer dereference at virtual address 00000080
pgd = c0004000
[00000080] *pgd=00000000
Internal error: Oops: 17 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 1    Not tainted  (3.5.0-rc6-00884-g0b2419e-dirty #130)
PC is at regmap_read+0x10/0x5c
LR is at hw_read+0x80/0x90
pc : [<c01a91b8>]    lr : [<c0216804>]    psr: 60000013

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: omap: Add missing modules aliases to get sound working on omap devices
Guillaume Gardet [Thu, 12 Jul 2012 13:08:16 +0000 (15:08 +0200)]
ASoC: omap: Add missing modules aliases to get sound working on omap devices

This patch add missing modules aliases to get sound working on omap devices.

Tested on Beagleboard xM rev. B.

This patch is against 3.5-rc6 vanilla.

Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr>
Signed-off-by: Mans Rullgard <mans.rullgard@linaro.org>
From 18b1ba8becc3dd256bdaad2d825f46b551debda3 Mon Sep 17 00:00:00 2001
From: Guillaume GARDET <guillaume.gardet@oliseo.fr>
Date: Tue, 10 Jul 2012 13:47:16 +0200
Subject: [PATCH] Add missing modules aliases to fix audio on omap devices
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agosound: tegra_alc5632: Adjust to of_get_named_gpio() change
Roland Stigge [Mon, 18 Jun 2012 16:42:22 +0000 (18:42 +0200)]
sound: tegra_alc5632: Adjust to of_get_named_gpio() change

of_get_named_gpio() was changed to return -EPROBE_DEFER in case of
gpios not probed yet. This patch adjusts tegra_alc5632 to this.

Signed-off-by: Roland Stigge <stigge@antcom.de>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agosound: tegra_wm8903: Adjust to of_get_named_gpio() change
Roland Stigge [Mon, 18 Jun 2012 16:42:21 +0000 (18:42 +0200)]
sound: tegra_wm8903: Adjust to of_get_named_gpio() change

of_get_named_gpio() was changed to return -EPROBE_DEFER in case of
gpios not probed yet. This patch adjusts tegra_wm8903 to this.

Signed-off-by: Roland Stigge <stigge@antcom.de>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: mc13783: Provide codec->control_data
Fabio Estevam [Thu, 26 Jul 2012 18:29:03 +0000 (15:29 -0300)]
ASoC: mc13783: Provide codec->control_data

If codec->control_data is not provided, the following crash happens:

Unable to handle kernel NULL pointer dereference at virtual address 00000078
pgd = 80004000
[00000078] *pgd=00000000
Internal error: Oops: 5 [#1] SMP ARM
Modules linked in:
CPU: 0    Tainted: G        W     (3.5.0-next-20120725+ #1263)
PC is at regmap_read+0x18/0x64
LR is at hw_read+0x50/0x98
pc : [<802bcd90>]    lr : [<803cad18>]    psr: 60000013
...

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: ux500: Include the correct header files
Lee Jones [Thu, 26 Jul 2012 10:28:38 +0000 (11:28 +0100)]
ASoC: ux500: Include the correct header files

Thought to be another merge error, board-mop500-msp.h has never existed
in the upstream kernel, only msp.h. This patch changes the include files
to match the existing file name.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: wm8994: Hold runtime PM reference while handling mic and jack IRQs
Mark Brown [Tue, 24 Jul 2012 14:48:57 +0000 (15:48 +0100)]
ASoC: wm8994: Hold runtime PM reference while handling mic and jack IRQs

Ensures that we don't interact badly with the power management framework,
especially in the cases where we're doing deferred work or we're using a
direct GPIO for these signals.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: sgtl5000: remove unneeded snd_soc_dapm_new_widgets in probe
Dong Aisheng [Fri, 20 Jul 2012 09:20:26 +0000 (17:20 +0800)]
ASoC: sgtl5000: remove unneeded snd_soc_dapm_new_widgets in probe

There's a driver bug that sgtl5000 dapm widget kcontrols do not work.
e.g. can not select capture mux with amixer tool(no error info prompted).

The root cause is that we still call snd_soc_dapm_new_widgets in
codec driver probe function afer converting to table based widgets.
This will cause the card dapm widgets are instantiated before the
dapm_routes are registered.
Then, no available dapm widget pathes can be found during instantiation
which finally will cause soc_dapm_mux_update_power to fail(can not find
correct path with kcontrol) in snd_soc_dapm_put_enum_double function.

Here we remove the unneeded snd_soc_dapm_new_widgets in codec probe
and let the soc core to handle the register sequence properly.
Then we can fix above issue.

Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: mxs-saif: set a base clock rate for EXTMASTER mode work
Dong Aisheng [Fri, 20 Jul 2012 09:20:25 +0000 (17:20 +0800)]
ASoC: mxs-saif: set a base clock rate for EXTMASTER mode work

Set an initial clock rate for the saif internal logic to work
properly. This is important when working in EXTMASTER mode that
uses the other saif's BITCLK&LRCLK but it still needs a basic
clock which should be fast enough for the internal logic.

Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: mxs-saif: fix clock prepare and enable unbalance issue
Dong Aisheng [Fri, 20 Jul 2012 09:20:24 +0000 (17:20 +0800)]
ASoC: mxs-saif: fix clock prepare and enable unbalance issue

Currently we directly call a clock_enable in trigger function without
a clk_prepare as pair first.
This will cause system hang immediately when run capture because
the clock was not prepared(playback does not hang because the clock was
prepared already by get_mclk before), a warning message in clock framework
may cause a deadlock to reclaim clock lock (see: pl011_console_write).

Here we prepare clock first in hw_param, then enable it in trigger
function to guarantee the balance.

Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: wm8994: Ensure there are enough BCLKs for four channels
Mark Brown [Fri, 22 Jun 2012 16:21:17 +0000 (17:21 +0100)]
ASoC: wm8994: Ensure there are enough BCLKs for four channels

Otherwise if someone tries to use all four channels on AIF1 with the
device in master mode we won't be able to clock out all the data.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org
12 years agoMerge branch 'for-3.5' into for-3.6
Mark Brown [Mon, 23 Jul 2012 09:45:07 +0000 (10:45 +0100)]
Merge branch 'for-3.5' into for-3.6

12 years agoASoC: dapm: Fix _PRE and _POST events for DAPM performance improvements
Mark Brown [Fri, 20 Jul 2012 16:29:34 +0000 (17:29 +0100)]
ASoC: dapm: Fix _PRE and _POST events for DAPM performance improvements

Ever since the DAPM performance improvements we've been marking all widgets
as not dirty after each DAPM run. Since _PRE and _POST events aren't part
of the DAPM graph this has rendered them non-functional, they will never be
marked dirty again and thus will never be run again.

Fix this by skipping them when marking widgets as not dirty.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Cc: stable@vger.kernel.org
12 years agoASoC imx-audmux: add MX31_AUDMUX_PORT7_SSI_PINS_7 define
Torben Hohn [Wed, 18 Jul 2012 13:01:17 +0000 (15:01 +0200)]
ASoC imx-audmux: add MX31_AUDMUX_PORT7_SSI_PINS_7 define

The MX31 Audmux also has 7 Ports.
This patch adds the missing define, and makes the debugfs code iterate
over that port too.

Signed-off-by: Torben Hohn <torbenh@linutronix.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: littlemill: Add userspace control of the WM1250 I/O
Mark Brown [Wed, 18 Jul 2012 18:16:06 +0000 (19:16 +0100)]
ASoC: littlemill: Add userspace control of the WM1250 I/O

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: wm8994: Update micdet for irqdomain conversion
Mark Brown [Wed, 18 Jul 2012 18:11:30 +0000 (19:11 +0100)]
ASoC: wm8994: Update micdet for irqdomain conversion

The conversion of the core driver to irqdomains means that we don't need
and irq_base to have working interrupts so use wm8994_request_irq() to
deal with looking up the interrupt number for the micdet IRQ.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: Convert S3C2412 I2S driver to gpiolib API
Sylwester Nawrocki [Fri, 13 Jul 2012 17:22:45 +0000 (19:22 +0200)]
ASoC: Convert S3C2412 I2S driver to gpiolib API

The s3c2410_gpio* calls are obsolete and have been scheduled for
removal since several kernel releases. Remove them and use common
gpiolib API.
This patch is a prerequisite for removal of the obsolete S3C24XX
SoC GPIO definitions.

Compile tested only.

Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: Convert S3C24XX I2S driver to gpiolib API
Sylwester Nawrocki [Fri, 13 Jul 2012 17:22:44 +0000 (19:22 +0200)]
ASoC: Convert S3C24XX I2S driver to gpiolib API

The s3c2410_gpio* calls are obsolete and have been scheduled for
removal since several kernel releases. Remove them and use common
gpiolib API.
This patch is a prerequisite for removal of the obsolete S3C24XX
SoC GPIO definitions.

Tested on Micro2440-SDK.

Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: dapm: Fix compilation warning
Marek Belisko [Thu, 12 Jul 2012 21:00:16 +0000 (23:00 +0200)]
ASoC: dapm: Fix compilation warning

Fix following:
sound/soc/soc-dapm.c: In function ‘dapm_clock_event’:
sound/soc/soc-dapm.c:1021:1: warning: control reaches end of non-void function [-Wreturn-type]

Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: wm8962: Redo early init of the part on resume
Mark Brown [Wed, 11 Jul 2012 18:03:48 +0000 (19:03 +0100)]
ASoC: wm8962: Redo early init of the part on resume

Ensure robust startup of the part by going through the reset procedure
prior to resyncing the full register cache, avoiding potential intermittent
faults in some designs.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org
12 years agoASoC: Free memory in the error paths of soc_of_parse_audio_routing()
Matthias Kaehlcke [Wed, 11 Jul 2012 15:36:34 +0000 (17:36 +0200)]
ASoC: Free memory in the error paths of soc_of_parse_audio_routing()

Release the memory of the routing table before leaving the function upon errors
in the device tree

Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: wm5110: Add audio CODEC driver
Mark Brown [Mon, 9 Jul 2012 18:09:41 +0000 (19:09 +0100)]
ASoC: wm5110: Add audio CODEC driver

The WM5110 is a highly integrated low power audio subsystem for
smartphones, tablets and other portable audio devices. It combines
an advanced DSP feature set with a flexible, high performance audio
hub CODEC.

This patch adds the audio CODEC driver for the device.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: STA529: fix an error message
Dan Carpenter [Wed, 11 Jul 2012 06:41:23 +0000 (09:41 +0300)]
ASoC: STA529: fix an error message

GCC complains that "ret" is uninitialized here.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-By: Rajeev Kumar <rajeev-dlh.kumar@st.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: arizona: Support variable FLL VCO multipliers
Mark Brown [Tue, 10 Jul 2012 16:03:46 +0000 (17:03 +0100)]
ASoC: arizona: Support variable FLL VCO multipliers

Some Arizona chips have a higher frequency for the FLL VCO, support this
in the common code.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: tlv320aic3x: add input clock selection
Jiri Prchal [Tue, 10 Jul 2012 12:36:58 +0000 (14:36 +0200)]
ASoC: tlv320aic3x: add input clock selection

This patch adds input selection of main codec clock - from what pin.
Both registers set same value since codec uses clock divider or pll at one time.

Signed-off-by: Jiri Prchal <jiri.prchal@aksignal.cz>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: tlv320aic3x: add AGC settings
Jiri Prchal [Tue, 10 Jul 2012 12:35:11 +0000 (14:35 +0200)]
ASoC: tlv320aic3x: add AGC settings

This patch adds AGC target level and times settings for TLV320AIC3x.
Enums uses small arrays of two channels left and right since it uses different registers.

Signed-off-by: Jiri Prchal <jiri.prchal@aksignal.cz>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: tlv320aic3x: add deemphasis switch
Jiri Prchal [Mon, 9 Jul 2012 07:48:44 +0000 (09:48 +0200)]
ASoC: tlv320aic3x: add deemphasis switch

This patch adds missing deemphasis switch.

Signed-off-by: Jiri Prchal <jiri.prchal@aksignal.cz>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: wm5102: Fix cut'n'paste for digital volume registers
Mark Brown [Mon, 9 Jul 2012 18:08:23 +0000 (19:08 +0100)]
ASoC: wm5102: Fix cut'n'paste for digital volume registers

The analogue PGA shifts were used; this makes no practical difference as
the values are the same.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: arizona: Add IN4 to the mixer tables
Mark Brown [Mon, 9 Jul 2012 18:09:01 +0000 (19:09 +0100)]
ASoC: arizona: Add IN4 to the mixer tables

Some devices have four input structures rather than three.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: arizona: Export dai_ops
Mark Brown [Mon, 9 Jul 2012 11:16:41 +0000 (12:16 +0100)]
ASoC: arizona: Export dai_ops

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: omap-mcpdm: Add missing MODULE_ALIAS
Peter Ujfalusi [Fri, 6 Jul 2012 10:19:10 +0000 (12:19 +0200)]
ASoC: omap-mcpdm: Add missing MODULE_ALIAS

The MODULE_ALIAS() was missing from the driver.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: arizona: Change DAPM routes for AIF clocks when we change them
Mark Brown [Thu, 5 Jul 2012 16:26:59 +0000 (17:26 +0100)]
ASoC: arizona: Change DAPM routes for AIF clocks when we change them

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
12 years agoASoC: dapm: Allow routes to be deleted at runtime
Mark Brown [Thu, 5 Jul 2012 16:24:19 +0000 (17:24 +0100)]
ASoC: dapm: Allow routes to be deleted at runtime

Since we're now relying on DAPM for things like enabling clocks when we
reparent the clocks for widgets we need to either use conditional routes
(which are expensive) or remove routes at runtime. Add a route removal
API to support this use case.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
12 years agoASoC: dapm: Mark widgets as dirty when a route is added
Mark Brown [Thu, 5 Jul 2012 16:20:06 +0000 (17:20 +0100)]
ASoC: dapm: Mark widgets as dirty when a route is added

If we add a new route at runtime then we'll need to recheck the connections
to the affected widgets.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
12 years agoASoC: dpcm: Allow FE to be opened without valid BE routes.
Liam Girdwood [Fri, 6 Jul 2012 16:07:00 +0000 (17:07 +0100)]
ASoC: dpcm: Allow FE to be opened without valid BE routes.

Some userspace will open a PCM device and then configure mixers
for routing before triggering. This patch allows userspace to do
this sequence.

Signed-off-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: twl6040: fix spelling mistake
Simon Wilson [Fri, 6 Jul 2012 16:04:17 +0000 (17:04 +0100)]
ASoC: twl6040: fix spelling mistake

Fix spelling mistake in "High-Performance" option of twl6040 power mode.

Signed-off-by: Simon Wilson <simonwilson@google.com>
Signed-off-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: dapm: Make sure all dapm contexts are updated
Liam Girdwood [Fri, 6 Jul 2012 15:56:16 +0000 (16:56 +0100)]
ASoC: dapm: Make sure all dapm contexts are updated

Make sure we set the bias level for all DAPM contexts when
changing level.

Signed-off-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: pcm: Clean up logging in soc_new_pcm()
Liam Girdwood [Fri, 6 Jul 2012 15:54:52 +0000 (16:54 +0100)]
ASoC: pcm: Clean up logging in soc_new_pcm()

Use dev_ style logging throughout soc_new_pcm()

Signed-off-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: dapm: Fix locking during codec shutdown
Liam Girdwood [Fri, 6 Jul 2012 15:57:05 +0000 (16:57 +0100)]
ASoC: dapm: Fix locking during codec shutdown

Codec shutdown performs a DAPM power sequence that might cause conflicts
and/or race conditions if another stream power event is running simultaneously.
Use card's dapm mutex to protect any potential race condition between them.

Signed-off-by: Misael Lopez Cruz <misael.lopez@ti.com>
Signed-off-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org
12 years agoASoC: wm1250-ev1: Flag all supported rates in the DAI
Mark Brown [Thu, 5 Jul 2012 13:30:59 +0000 (14:30 +0100)]
ASoC: wm1250-ev1: Flag all supported rates in the DAI

Not previously noticed due to normal usage being with CODEC<->CODEC links.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: wm5102: Allow routing through the ASRCs
Mark Brown [Wed, 4 Jul 2012 19:07:03 +0000 (20:07 +0100)]
ASoC: wm5102: Allow routing through the ASRCs

This enables common telephony use cases.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: arizona: Enable ASYNCCLK domain for audio interfaces
Mark Brown [Wed, 4 Jul 2012 19:05:57 +0000 (20:05 +0100)]
ASoC: arizona: Enable ASYNCCLK domain for audio interfaces

If an audio interface is configured to use ASYNCCLK then update the
asynchronous sample rate rather than one of our primary sample rates.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: imx-mc13783: Add audmux settings for mx27pdk
Fabio Estevam [Tue, 3 Jul 2012 18:44:58 +0000 (15:44 -0300)]
ASoC: imx-mc13783: Add audmux settings for mx27pdk

mx27pdk board also has a mc13783 codec.

Add support for it and do a run-time machine type check to perform the correct
audiomux settings.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: fsl: remove unneeded AUDMUX register setting from imx-sgtl5000
Hui Wang [Wed, 4 Jul 2012 07:38:27 +0000 (15:38 +0800)]
ASoC: fsl: remove unneeded AUDMUX register setting from imx-sgtl5000

If we don't set IMX_AUDMUX_V2_PTCR_TCLKDIR in the AUDMUX PTCR
register (means Tx clock pin is input), we don't need to set
IMX_AUDMUX_V2_PTCR_TCSEL as well. Since both i.MX35, i.MX51 and
i.MX6 datasheet says "When Tx clock pin set as an input, the TCSEL
settings are ignored".

Signed-off-by: Hui Wang <jason77.wang@gmail.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: arizona: Be more forgiving in BCLK selection
Mark Brown [Wed, 4 Jul 2012 18:07:09 +0000 (19:07 +0100)]
ASoC: arizona: Be more forgiving in BCLK selection

Allow any BCLK which can be divided down to generate LRCLK, not just the
lowest possible BCLK to clock out the samples.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: arizona: Implement AIF clock configuration
Mark Brown [Wed, 4 Jul 2012 16:32:05 +0000 (17:32 +0100)]
ASoC: arizona: Implement AIF clock configuration

Allow the user to select which of the system clocks each AIF is referenced
to and constran the DAI to the set of frequencies which can be generated
from that clock.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: arizona: Rename current rates tables to bclk_rates
Mark Brown [Wed, 4 Jul 2012 17:58:04 +0000 (18:58 +0100)]
ASoC: arizona: Rename current rates tables to bclk_rates

They're the rates for the BCLK, not for the sample rate, so rename so that
we don't confuse ourselves.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: dwc: Staticise non-exported i2s_start()
Mark Brown [Wed, 4 Jul 2012 18:04:11 +0000 (19:04 +0100)]
ASoC: dwc: Staticise non-exported i2s_start()

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: SPEAr spdif_out: Add spdif out support
Vipin Kumar [Wed, 4 Jul 2012 10:41:13 +0000 (16:11 +0530)]
ASoC: SPEAr spdif_out: Add spdif out support

This patch implements the spdif out driver for ST peripheral. This
peripheral implements IEC60958 standard

Signed-off-by: Vipin Kumar <vipin.kumar@st.com>
Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: STA529: Add support for STA529 Audio Codec
Rajeev Kumar [Wed, 4 Jul 2012 10:41:12 +0000 (16:11 +0530)]
ASoC: STA529: Add support for STA529 Audio Codec

The STA529 is a digital stereo class-D audio amplifier. It includes an
audio DSP, an ST proprietary high-efficiency class-D driver and CMOS
power output stage. It is intended for high-efficiency
digital-to-power-audio conversion for portable applications.

Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: tlv320aic3x: extending registers cache
Jiri Prchal [Wed, 4 Jul 2012 06:12:51 +0000 (08:12 +0200)]
ASoC: tlv320aic3x: extending registers cache

Adds missing register default values to cache.

Signed-off-by: Jiri Prchal <jiri.prchal@aksignal.cz>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: tlv320aic3x: add missing registers and bits
Jiri Prchal [Wed, 4 Jul 2012 06:12:50 +0000 (08:12 +0200)]
ASoC: tlv320aic3x: add missing registers and bits

Adds register and bit shift definitions in header file.
Changes are for TLV320AIC310x based on data sheet.

Signed-off-by: Jiri Prchal <jiri.prchal@aksignal.cz>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: wm8994: Don't suspend accessory detection
Mark Brown [Tue, 26 Jun 2012 10:06:53 +0000 (11:06 +0100)]
ASoC: wm8994: Don't suspend accessory detection

Leave it up to the machine driver to disable accessory detection if
desired, the common pattern is to have accessory detection be a wake
source.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: core: Try to use regmap if the driver doesn't set up any I/O
Mark Brown [Fri, 22 Jun 2012 12:04:02 +0000 (13:04 +0100)]
ASoC: core: Try to use regmap if the driver doesn't set up any I/O

Since most new drivers are expected to use regmap and since frequently the
only thing we need to do in the CODEC probe function is configure the I/O
try to initialise the register I/O using regmap if the driver hasn't done
so after probe().

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
12 years agoASoC: wm8962: Log AIF configuration requested by hw_params()
Mark Brown [Mon, 2 Jul 2012 17:19:58 +0000 (18:19 +0100)]
ASoC: wm8962: Log AIF configuration requested by hw_params()

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: dapm: Fix dapm_set_path_status() connect
Benoît Thébaudeau [Mon, 2 Jul 2012 11:45:21 +0000 (13:45 +0200)]
ASoC: dapm: Fix dapm_set_path_status() connect

dapm_set_path_status() sets connect incorrectly in the case max > 1 with invert.
In that case, the raw disconnect value should be max, which corresponds to the
userspace value 0.

This use case currently does not appear upstream, but it could break
SOC_DAPM_SINGLE() or SOC_DAPM_SINGLE_TLV() elsewhere or in the future.

This patch completes commit 3a9abe8.

Cc: Liam Girdwood <lrg@ti.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: <alsa-devel@alsa-project.org>
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: tegra: use dmaengine based dma driver
Laxman Dewangan [Fri, 29 Jun 2012 11:34:33 +0000 (17:04 +0530)]
ASoC: tegra: use dmaengine based dma driver

Use the dmaengine based Tegra APB DMA driver for
data transfer between SPI fifo and memory in
place of legacy Tegra APB DMA.

Because generic soc-dmaengine-pcm uses the DMAs API
based on dmaengine, using the exported APIs provided
by this generic driver.

The new driver is selected if legacy driver is not
selected and new dma driver is enabled through config
file.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: dapm: Remove incomplete stereo code
Benoît Thébaudeau [Tue, 3 Jul 2012 18:18:17 +0000 (20:18 +0200)]
ASoC: dapm: Remove incomplete stereo code

Stereo is not yet supported by dapm widgets, so remove stereo code from
snd_soc_dapm_get_volsw(), and warn if stereo controls are detected.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: smdk_wm8994: Convert to use snd_soc_register_card()
Sachin Kamat [Tue, 3 Jul 2012 08:34:04 +0000 (14:04 +0530)]
ASoC: smdk_wm8994: Convert to use snd_soc_register_card()

Current method for machine driver to register with the ASoC core is to use
snd_soc_register_card() instead of creating a "soc-audio" platform device.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Sangbeom Kim <sbkim73@samsung.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: mioa701: convert to snd_soc_register_card API
Robert Jarzmik [Sat, 30 Jun 2012 17:25:08 +0000 (19:25 +0200)]
ASoC: mioa701: convert to snd_soc_register_card API

The mioa701 board code is converted to the snd_soc_register_card()
and snd_soc_unregister_card() APIs.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: tlv320aic3x: Fix codec pll configure bug
Hebbar, Gururaja [Tue, 26 Jun 2012 13:55:11 +0000 (19:25 +0530)]
ASoC: tlv320aic3x: Fix codec pll configure bug

In sound/soc/codecs/tlv320aic3x.c

        data = snd_soc_read(codec, AIC3X_PLL_PROGA_REG);
        snd_soc_write(codec, AIC3X_PLL_PROGA_REG,
                      data | (pll_p << PLLP_SHIFT));

In the above code, pll-p value is OR'ed with previous value without
clearing it. Bug is not seen if pll-p value doesn't change across
Sampling frequency.

However on some platforms (like AM335x EVM-SK), pll-p may have different
values across different sampling frequencies. In such case, above code
configures the pll with a wrong value.
Because of this bug, when a audio stream is played with pll value
different from previous stream, audio is heard as differently(like its
stretched).

Signed-off-by: Hebbar, Gururaja <gururaja.hebbar@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org
12 years agoASoC: wm2200: Add missing BCLK rate
Mark Brown [Wed, 20 Jun 2012 13:16:57 +0000 (14:16 +0100)]
ASoC: wm2200: Add missing BCLK rate

Without this very high BCLKs will be configured incorrectly.

Reported-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org
12 years agoASoC: dapm: Fix snd_soc_dapm_put_volsw() connect
Benoît Thébaudeau [Mon, 18 Jun 2012 20:41:28 +0000 (22:41 +0200)]
ASoC: dapm: Fix snd_soc_dapm_put_volsw() connect

snd_soc_dapm_put_volsw() sets connect incorrectly in the case max > 1 with
invert. In that case, the raw disconnect value should be max, which corresponds
to the userspace value 0.

This use case currently does not appear upstream, but it could break
SOC_DAPM_SINGLE() or SOC_DAPM_SINGLE_TLV() elsewhere or in the future.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: spdif: Build separate RX and TX objects
Mark Brown [Fri, 29 Jun 2012 01:34:46 +0000 (02:34 +0100)]
ASoC: spdif: Build separate RX and TX objects

Otherwise we fail to link when building as modules due to multiple
init/exit functions.

Reported-by: Fengguang Wu <wfg@linux.intel.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: spdif_receiver: Add support for spdif in Audio Codec
Vipin Kumar [Thu, 28 Jun 2012 07:01:37 +0000 (12:31 +0530)]
ASoC: spdif_receiver: Add support for spdif in Audio Codec

This patch adds the support for spdif in audio codec.

Signed-off-by: vipin Kumar <vipin.kumar@st.com>
Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: dwc: Add missing __iomem annotations
Mark Brown [Thu, 28 Jun 2012 12:11:47 +0000 (13:11 +0100)]
ASoC: dwc: Add missing __iomem annotations

Otherwise sparse gets very upset with us.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: wm5102: Remove unused platform data header
Mark Brown [Wed, 27 Jun 2012 13:59:20 +0000 (14:59 +0100)]
ASoC: wm5102: Remove unused platform data header

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoALSA: hda - Fix power-map regression for HP dv6 & co
Takashi Iwai [Tue, 26 Jun 2012 15:35:10 +0000 (17:35 +0200)]
ALSA: hda - Fix power-map regression for HP dv6 & co

The recent fix for power-map controls (commit b0791dda813) caused
regressions on some other HP laptops.  They have fixed pins but these
pins are exposed as jack-detectable.  Thus the driver tries to control
the power-map dynamically per jack detection where it never gets on.

This patch adds the check of connection and it assumes the no jack
detection is available for fixed pins no matter what pin capability
says.

BugLink: http://bugs.launchpad.net/bugs/1013183
Reported-by: Luis Henriques <luis.henriques@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Initialize caches at codec reconfiguration
Takashi Iwai [Tue, 26 Jun 2012 13:01:33 +0000 (15:01 +0200)]
ALSA: hda - Initialize caches at codec reconfiguration

Better to clean up the caches for avoiding inconsistent codec state
after the reconfiguration.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Fix memory leaks at module unload
Takashi Iwai [Tue, 26 Jun 2012 13:00:20 +0000 (15:00 +0200)]
ALSA: hda - Fix memory leaks at module unload

Some caches aren't released properly at module unloading time.

Cc: <stable@vger.kernel.org> [v3.4+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Fix memory leaks in Realtek & Conexant codec parsers
Takashi Iwai [Tue, 26 Jun 2012 12:54:32 +0000 (14:54 +0200)]
ALSA: hda - Fix memory leaks in Realtek & Conexant codec parsers

When moved to the helper code, forgot to release the verb arrays.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Add Realtek ALC280 codec support
David Henningsson [Mon, 25 Jun 2012 17:49:28 +0000 (19:49 +0200)]
ALSA: hda - Add Realtek ALC280 codec support

This chip looks very similar to ALC269 and ALC27* variants. The bug reporter
has verified that sound was working after this patch had been applied.

Cc: stable@kernel.org
BugLink: https://bugs.launchpad.net/bugs/1017017
Tested-by: Richard Crossley <richardcrossley@o2.co.uk>
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Remove obsoleted CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS
Takashi Iwai [Mon, 25 Jun 2012 12:36:43 +0000 (14:36 +0200)]
ALSA: hda - Remove obsoleted CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS

I simply forgot to remove this entry although all Realtek quirks have
been dropped.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoASoC: wm8994: remove duplicate code
Jaroslav Kysela [Mon, 28 May 2012 09:14:33 +0000 (11:14 +0200)]
ASoC: wm8994: remove duplicate code

It seems that the code duplication was added at a merge operation.

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: usb-audio: add BOSS GT-100 support
Clemens Ladisch [Sat, 23 Jun 2012 15:30:47 +0000 (17:30 +0200)]
ALSA: usb-audio: add BOSS GT-100 support

Reported-by: John McFarland <mcfarljm@gmail.com>
Tested-by: John McFarland <mcfarljm@gmail.com>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoASoC: dwc: Bodge around continuing absence of clock API stubs
Mark Brown [Mon, 25 Jun 2012 09:01:27 +0000 (10:01 +0100)]
ASoC: dwc: Bodge around continuing absence of clock API stubs

The patches for stubbing out the generic clock API still haven't been
applied so we need to either add ifdefs here or add a dependency until
someone decides to actually apply them.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: wm8996: Move register default configuration to I2C probe
Mark Brown [Mon, 11 Jun 2012 11:10:50 +0000 (19:10 +0800)]
ASoC: wm8996: Move register default configuration to I2C probe

This gets the registers set up as early as possible, mainly useful for the
GPIOs to ensure that they're in the correct mode.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: wm8996: Inline wm8996_reset() and optimise cache-only usage
Mark Brown [Mon, 11 Jun 2012 10:41:16 +0000 (18:41 +0800)]
ASoC: wm8996: Inline wm8996_reset() and optimise cache-only usage

There is only one caller and this allows us to cleanly leave the CODEC
with the internal LDO powered down which is the default state we're
looking for and means that we can robustly disable the register cache
only when we either disable the LDO or power down the external
regulators.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: wm8996: Move regulator notifier callbacks into I2C level
Mark Brown [Mon, 11 Jun 2012 10:42:06 +0000 (18:42 +0800)]
ASoC: wm8996: Move regulator notifier callbacks into I2C level

Now that we're using regmap the cache is available here.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: wm8904: Move register default setup into I2C probe()
Mark Brown [Sat, 9 Jun 2012 03:57:37 +0000 (11:57 +0800)]
ASoC: wm8904: Move register default setup into I2C probe()

Get it done as early as possible, it's neater and minimises the time the
pins aren't configured as requested.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: wm8904: Move regulator acquisition and device identification to I2C
Mark Brown [Sat, 9 Jun 2012 03:41:58 +0000 (11:41 +0800)]
ASoC: wm8904: Move regulator acquisition and device identification to I2C

It's more idiomatic to have the resource allocation at this level.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: wm8904: Rely entirely on the core for bias level management
Mark Brown [Sat, 9 Jun 2012 03:30:43 +0000 (11:30 +0800)]
ASoC: wm8904: Rely entirely on the core for bias level management

Even though the WM8904 is able to use idle_bias_off during both probe
and resume we were needlessly leaving the device in standby mode. Instead
power the device down as soon as we've confirmed that we can talk to it
and don't manage the bias level at all over suspend and resume, the core
will take us down to our minimum power level.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoMerge tag 'v3.5-rc4' into for-3.6
Mark Brown [Mon, 25 Jun 2012 08:52:59 +0000 (09:52 +0100)]
Merge tag 'v3.5-rc4' into for-3.6

Linux 3.5-rc4 contains some bug fixes which overlap with new features.

12 years agoASoC: dmaengine_pcm: fix typo in comment
Uwe Kleine-König [Mon, 25 Jun 2012 07:28:46 +0000 (09:28 +0200)]
ASoC: dmaengine_pcm: fix typo in comment

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoLinux 3.5-rc4
Linus Torvalds [Sun, 24 Jun 2012 19:53:04 +0000 (12:53 -0700)]
Linux 3.5-rc4

12 years agoFix typo in printed messages
Anatol Pomozov [Sat, 23 Jun 2012 22:54:34 +0000 (15:54 -0700)]
Fix typo in printed messages

Coult -> Could

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoMerge git://git.kernel.org/pub/scm/virt/kvm/kvm
Linus Torvalds [Sun, 24 Jun 2012 18:02:09 +0000 (11:02 -0700)]
Merge git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM fixes from Avi Kivity:
 "Fixing a scheduling-while-atomic bug in the ppc code, and a bug which
  allowed pci bridges to be assigned to guests."

* git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: PPC: Book3S HV: Drop locks around call to kvmppc_pin_guest_page
  KVM: Fix PCI header check on device assignment

12 years agoMerge tag 'rdma-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
Linus Torvalds [Sun, 24 Jun 2012 18:00:07 +0000 (11:00 -0700)]
Merge tag 'rdma-fixes' of git://git./linux/kernel/git/roland/infiniband

Pull InfiniBand/RDMA fixes from Roland Dreier:
 - Fixes to new ocrdma driver
 - Typo in test in CMA

* tag 'rdma-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  RDMA/cma: QP type check on received REQs should be AND not OR
  RDMA/ocrdma: Fix off by one in ocrdma_query_gid()
  RDMA/ocrdma: Fixed RQ error CQE polling
  RDMA/ocrdma: Correct queue SGE calculation
  RDMA/ocrdma: Correct reported max queue sizes
  RDMA/ocrdma: Fixed GID table for vlan and events

12 years agoMerge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm...
Linus Torvalds [Sun, 24 Jun 2012 17:57:59 +0000 (10:57 -0700)]
Merge tag 'fixes-for-linus' of git://git./linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "Nothing very controversial in here.  Most of the fixes are for OMAP
  this time around, with some orion/kirkwood and a tegra patch mixed in."

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: Orion: Fix Virtual/Physical mixup with watchdog
  ARM: Kirkwood: clk_register_gate_fn: add fn assignment
  ARM: Orion5x - Restore parts of io.h, with rework
  ARM: OMAP4: hwmod data: Force HDMI in no-idle while enabled
  ARM: OMAP2+: mux: fix sparse warning
  ARM: OMAP2+: CM: increase the module disable timeout
  ARM: OMAP4: clock data: add clockdomains for clocks used as main clocks
  ARM: OMAP4: hwmod data: fix 32k sync timer idle modes
  ARM: OMAP4+: hwmod: fix issue causing IPs not going back to Smart-Standby
  ARM: OMAP: Fix Beagleboard DVI reset gpio
  arm/dts: OMAP2: Fix interrupt controller binding
  ARM: OMAP2: Fix tusb6010 GPIO interrupt for n8x0
  ARM: OMAP2+: Fix MUSB ifdefs for platform init code
  ARM: tegra: make tegra_cpu_reset_handler_enable() __init
  ARM: OMAP: PM: Lock clocks list while generating summary
  ARM: iconnect: Remove include of removed linux/spi/orion_spi.h

12 years agoMerge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Linus Torvalds [Sun, 24 Jun 2012 17:57:15 +0000 (10:57 -0700)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux

Pull drm fixes from Dave Airlie:
 "Nothing major in here, one radeon SI fix for tiling, and one uninit
  var fix, two minor header file fixes."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm: drop comment about this header being autogenerated.
  drm/edid: don't return stack garbage from supports_rb
  vga_switcheroo: Add include guard
  drm/radeon: SI tiling fixes for display

12 years agoMerge branches 'cma' and 'ocrdma' into for-linus
Roland Dreier [Sun, 24 Jun 2012 11:59:59 +0000 (04:59 -0700)]
Merge branches 'cma' and 'ocrdma' into for-linus

12 years agoARM: Orion: Fix Virtual/Physical mixup with watchdog
Andrew Lunn [Fri, 22 Jun 2012 06:54:02 +0000 (08:54 +0200)]
ARM: Orion: Fix Virtual/Physical mixup with watchdog

The orion watchdog is expecting to be passed the physcial address of
the hardware, and will ioremap() it to give a virtual address it will
use as the base address for the hardware. However, when creating the
platform resource record, a virtual address was being used.

Add the necassary #define's so we can pass the physical address as
expected.

Tested on Kirkwood and Orion5x.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Olof Johansson <olof@lixom.net>
12 years agoARM: Kirkwood: clk_register_gate_fn: add fn assignment
Marc Kleine-Budde [Fri, 22 Jun 2012 06:54:01 +0000 (08:54 +0200)]
ARM: Kirkwood: clk_register_gate_fn: add fn assignment

In commit:
    98d9986 ARM: Kirkwood: Replace clock gating
the kirkwood clock gating has been reworked. A custom variant of
clock gating, that calls a custom function before gating the clock
off, has been introduced. However in clk_register_gate_fn() this
custom function "fn" is never assigned.

This patch adds the missing fn assignment.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@blackshift.org>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Olof Johansson <olof@lixom.net>
12 years agoARM: Orion5x - Restore parts of io.h, with rework
Andrew Lunn [Fri, 22 Jun 2012 18:57:57 +0000 (20:57 +0200)]
ARM: Orion5x - Restore parts of io.h, with rework

Commit 4d5fc58dbe34b78157c05b319669bb3e064ba8bd (ARM: remove bunch of
now unused mach/io.h files) removed the orion5x io.h. Unfortunately,
this is still needed for the definition of IO_SPACE_LIMIT which
overrides the default 64K. All Orion based systems have 1Mbyte of IO
space per PCI[e] bus, and try to request_resource() this size. Orion5x
has two such PCI buses.

It is likely that the original, removed version, was broken. This
version might be less broken. However, it has not been tested on
hardware with a PCI card, let alone hardware with a PCI card with IO
capabilities.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
12 years agoMerge tag 'omap-fixes-a-for-3.5rc' of git://git.kernel.org/pub/scm/linux/kernel/git...
Olof Johansson [Sat, 23 Jun 2012 23:16:29 +0000 (16:16 -0700)]
Merge tag 'omap-fixes-a-for-3.5rc' of git://git./linux/kernel/git/pjw/omap-pending into fixes

From Paul Walmsley (as per Tony Lindgren's request):
 "Some uncontroversial OMAP clock, hwmod, and compiler warning fixes for 3.5-rc"

* tag 'omap-fixes-a-for-3.5rc' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending:
  ARM: OMAP4: hwmod data: Force HDMI in no-idle while enabled
  ARM: OMAP2+: mux: fix sparse warning
  ARM: OMAP2+: CM: increase the module disable timeout
  ARM: OMAP4: clock data: add clockdomains for clocks used as main clocks
  ARM: OMAP4: hwmod data: fix 32k sync timer idle modes
  ARM: OMAP4+: hwmod: fix issue causing IPs not going back to Smart-Standby
  ARM: OMAP: PM: Lock clocks list while generating summary

12 years agoMerge tag 'omap-fixes-for-v3.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel...
Olof Johansson [Sat, 23 Jun 2012 23:11:50 +0000 (16:11 -0700)]
Merge tag 'omap-fixes-for-v3.5-rc3' of git://git./linux/kernel/git/tmlind/linux-omap into fixes

From Tony Lindgren:
"Here are a few fixes with the biggest one being fix for Beagle DVI
 reset. All of them are regression fixes, except for the missing omap2
 interrupt controller binding that somehow got missed earlier."

* tag 'omap-fixes-for-v3.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP: Fix Beagleboard DVI reset gpio
  arm/dts: OMAP2: Fix interrupt controller binding
  ARM: OMAP2: Fix tusb6010 GPIO interrupt for n8x0
  ARM: OMAP2+: Fix MUSB ifdefs for platform init code