Heiner Kallweit [Sun, 22 Aug 2021 13:57:27 +0000 (15:57 +0200)]
cxgb4: Validate VPD checksum with pci_vpd_check_csum()
Validate the VPD checksum with pci_vpd_check_csum() to simplify the code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Sun, 22 Aug 2021 13:56:24 +0000 (15:56 +0200)]
bnxt: Search VPD with pci_vpd_find_ro_info_keyword()
Use pci_vpd_find_ro_info_keyword() to search for keywords in VPD to
simplify the code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Sun, 22 Aug 2021 13:55:23 +0000 (15:55 +0200)]
bnxt: Read VPD with pci_vpd_alloc()
Use pci_vpd_alloc() to dynamically allocate a properly sized buffer and
read the full VPD data into it.
This simplifies the code, and we no longer have to make assumptions about
VPD size.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Sun, 22 Aug 2021 13:54:23 +0000 (15:54 +0200)]
bnx2x: Search VPD with pci_vpd_find_ro_info_keyword()
Use pci_vpd_find_ro_info_keyword() to search for keywords in VPD to
simplify the code.
str_id_reg and str_id_cap hold the same string and are used in the same
comparison. This doesn't make sense, use one string str_id instead.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Sun, 22 Aug 2021 13:53:23 +0000 (15:53 +0200)]
bnx2x: Read VPD with pci_vpd_alloc()
Use pci_vpd_alloc() to dynamically allocate a properly sized buffer and
read the full VPD data into it.
This simplifies the code, and we no longer have to make assumptions about
VPD size.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Sun, 22 Aug 2021 13:52:01 +0000 (15:52 +0200)]
bnx2: Replace open-coded version with swab32s()
Use swab32s() instead of open-coding it.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Sun, 22 Aug 2021 13:50:50 +0000 (15:50 +0200)]
bnx2: Search VPD with pci_vpd_find_ro_info_keyword()
Use pci_vpd_find_ro_info_keyword() to search for keywords in VPD to
simplify the code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Sun, 22 Aug 2021 13:49:36 +0000 (15:49 +0200)]
sfc: falcon: Search VPD with pci_vpd_find_ro_info_keyword()
This is the same as
37838aa437c7 "sfc: Search VPD with
pci_vpd_find_ro_info_keyword()", just for the falcon chip version.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Sun, 22 Aug 2021 13:48:33 +0000 (15:48 +0200)]
sfc: falcon: Read VPD with pci_vpd_alloc()
This is the same as
5119e20facfa "sfc: Read VPD with pci_vpd_alloc()",
just for the falcon chip version.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 22 Aug 2021 20:39:56 +0000 (21:39 +0100)]
Merge branch 'mlxsw-refactor-parser'
Ido Schimmel says:
====================
mlxsw: Refactor parsing configuration
The Spectrum ASIC has a configurable limit on how deep into the packet
it parses. By default, the limit is 96 bytes.
There are several cases where this parsing depth is not enough and there
is a need to increase it: Decapsulation of VxLAN packets and
timestamping of PTP packets.
Currently, parsing depth API is maintained as part of VxLAN module,
because the MPRS register which configures parsing depth also configures
UDP destination port number used for VxLAN encapsulation and
decapsulation.
However, in addition to two above mentioned users of this API, the
multipath hash code also needs to invoke it in order to correctly hash
based on inner fields of IPv6-in-IPv6 packets.
Upcoming support for IPv6-in-IPv6 tunneling will add another user, as
without increasing the parsing depth such packets cannot be properly
decapsulated.
Therefore, this patchset refactors the parsing configuration API and
moves it out of the VxLAN module to the main driver code.
Tested using existing selftests.
Patch set overview:
Patch #1 adds the new parsing configuration infrastructure.
Patch #2 converts existing users to the new infrastructure.
Patch #3 deletes the old infrastructure.
Patch #4 calls the new infrastructure from the multipath hash code.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Amit Cohen [Sun, 22 Aug 2021 11:37:16 +0000 (14:37 +0300)]
mlxsw: spectrum_router: Increase parsing depth for multipath hash
Commit
01848e05f8bb ("mlxsw: spectrum_router: Add support for inner
layer 3 multipath hash policy") and commit
daeabf89eb89 ("mlxsw:
spectrum_router: Add support for custom multipath hash policy") added
support for multipath hash policies where the hash is calculated based
on inner packet fields.
For IPv6-in-IPv6 packets, the default parsing depth (96 bytes) is not
enough when these policies are used.
Therefore, for such cases, call the new API to increase / decrease the
parsing depth as necessary. Care is taken to ensure the API is not
called multiple times.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Amit Cohen [Sun, 22 Aug 2021 11:37:15 +0000 (14:37 +0300)]
mlxsw: Remove old parsing depth infrastructure
The previous patches added new API to handle parsing depth and converted
the existing code to use it.
Remove the old infrastructure which is not needed anymore.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Amit Cohen [Sun, 22 Aug 2021 11:37:14 +0000 (14:37 +0300)]
mlxsw: Convert existing consumers to use new API for parsing configuration
Convert VxLAN and PTP modules to increase parsing depth using new API
that was added in the previous patch.
Separate MPRS register's configuration to VxLAN related configuration
and parsing depth configuration. Handle each one using the appropriate
API.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Amit Cohen [Sun, 22 Aug 2021 11:37:13 +0000 (14:37 +0300)]
mlxsw: spectrum: Add infrastructure for parsing configuration
Spectrum ASICs have a configurable limit on how deep into the packet
they parse. By default, the limit is 96 bytes.
There are several cases where this parsing depth is not enough and there
is a need to increase it. Currently, increasing parsing depth is
maintained as part of VxLAN module, because the MPRS register which
configures parsing depth also configures UDP destination port number
used for VxLAN encapsulation and decapsulation.
Add an API for increasing parsing depth as part of spectrum.c code, so
that it will be possible to use it from other modules. In addition, add
an API for setting UDP destination port and protect it using a dedicated
lock for saving parsing configurations. The lock is needed as not all
the callers hold RTNL lock.
Maintain a counter for increased parsing depth consumers. For first
consumer subscription, increase the parsing depth and for last consumer
unsubscription, set parsing depth to default value.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 22 Aug 2021 20:38:16 +0000 (21:38 +0100)]
Merge branch 'octeontx2-misc-fixes'
Sunil Goutham says:
====================
octeontx2: Miscellaneous fixes
This patch series contains a bunch of miscellaneous fixes
for various issues like
- Free unallocated memory during driver unload
- HW reading transmit descriptor from wrong address
- VF VLAN strip offload MCAM entry installation failure
- Pkts not being distributed across queues in RSS context
- Wrong interface backpressure configuration for NIX1 block on 98xx
- etc
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Geetha sowjanya [Sun, 22 Aug 2021 12:02:27 +0000 (17:32 +0530)]
octeontx2-af: cn10k: Use FLIT0 register instead of FLIT1
RVU SMMU widget stores the final translated PA at
RVU_AF_SMMU_TLN_FLIT0<57:18> instead of FLIT1 register. This patch
fixes the address translation logic to use the correct register.
Fixes:
893ae97214c3 ("octeontx2-af: cn10k: Support configurable LMTST regions")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sunil Goutham [Sun, 22 Aug 2021 12:02:26 +0000 (17:32 +0530)]
octeontx2-pf: Fix algorithm index in MCAM rules with RSS action
Otherthan setting action as RSS in NPC MCAM entry, RSS flowkey
algorithm index also needs to be set. Otherwise whatever algorithm
is defined at flowkey index '0' will be considered by HW and pkt
flows will be distributed as such.
Fix this by saving the flowkey index sent by admin function while
initializing RSS and then use it when framing MCAM rules.
Fixes:
81a4362016e7 ("octeontx2-pf: Add RSS multi group support")
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sunil Goutham [Sun, 22 Aug 2021 12:02:25 +0000 (17:32 +0530)]
octeontx2-pf: Don't install VLAN offload rule if netdev is down
Whenever user changes interface MAC address both default DMAC based
MCAM rule and VLAN offload (for strip) rules are updated with new
MAC address. To update or install VLAN offload rule PF driver needs
interface's receive channel info, which is retrieved from admin
function at the time of NIXLF initialization.
If user changes MAC address before interface is UP, VLAN offload rule
installation will fail and throw error as receive channel is not valid.
To avoid this, skip VLAN offload rule installation if netdev is not UP.
This rule will anyway be reinslatted as part of open() call.
Fixes:
fd9d7859db6c ("octeontx2-pf: Implement ingress/egress VLAN offload")
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geetha sowjanya [Sun, 22 Aug 2021 12:02:24 +0000 (17:32 +0530)]
octeontx2-af: Check capability flag while freeing ipolicer memory
Bandwidth profiles (ipolicer structure)is implemented only on CN10K
platform. But current code try to free the ipolicer memory without
checking the capibility flag leading to driver crash on OCTEONTX2
platform. This patch fixes the issue by add capability flag check.
Fixes:
e8e095b3b3700 ("octeontx2-af: cn10k: Bandwidth profiles config support")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geetha sowjanya [Sun, 22 Aug 2021 12:02:23 +0000 (17:32 +0530)]
octeontx2-af: Use DMA_ATTR_FORCE_CONTIGUOUS attribute in DMA alloc
CN10K platform requires physically contiguous memory for LMTST
operations which goes beyond a single page. Not having physically
contiguous memory will result in HW fetching transmit descriptors from
a wrong memory location.
Hence use DMA_ATTR_FORCE_CONTIGUOUS attribute while allocating
LMTST regions.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Naveen Mamindlapalli [Sun, 22 Aug 2021 12:02:22 +0000 (17:32 +0530)]
octeontx2-pf: send correct vlan priority mask to npc_install_flow_req
This patch corrects the erroneous vlan priority mask field that was
send to npc_install_flow_req.
Fixes:
1d4d9e42c240 ("octeontx2-pf: Add tc flower hardware offload on ingress traffic")
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hariprasad Kelam [Sun, 22 Aug 2021 12:02:21 +0000 (17:32 +0530)]
octeontx2-pf: Don't mask out supported link modes
Supported link modes are updated by firmware in shared
structure per interface. Kernel uses this value to display
supported link modes via ethtool.
Currently there is extra validation that firmware updated
modes are validated against internal list of supported modes.
As intenal list of supported modes are not updated frequently
new modes supported by firmware are not updated to ethtool.
Hence remove extra validation and report all firmware updated
modes.
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geetha sowjanya [Sun, 22 Aug 2021 12:02:20 +0000 (17:32 +0530)]
octeontx2-af: Handle return value in block reset.
Print debug message if any of the RVU hardware blocks
reset fails.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Subbaraya Sundeep [Sun, 22 Aug 2021 12:02:19 +0000 (17:32 +0530)]
octeontx2-af: cn10k: Fix SDP base channel number
As per hardware the base channel number configured
for programmable channels of a block must be multiple
of number of channels of that block. This condition
is not met for SDP base channel currently. Hence this
patch ensures all the base channel numbers of all
blocks are multiple of number of channels present in
the blocks. Also instead of hardcoding SDP number
of channels the same is read from the NIX_AF_CONST1
register.
Fixes:
242da439214b ("octeontx2-af: cn10k: Add support for programmable")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Subbaraya Sundeep [Sun, 22 Aug 2021 12:02:18 +0000 (17:32 +0530)]
octeontx2-pf: Fix NIX1_RX interface backpressure
'bp_ena' in Aura context is NIX block index, setting it
zero will always backpressure NIX0 block, even if NIXLF
belongs to NIX1. Hence fix this by setting it appropriately
based on NIX block address.
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rafał Miłecki [Fri, 20 Aug 2021 16:15:33 +0000 (18:15 +0200)]
dt-bindings: net: brcm,unimac-mdio: convert to the json-schema
This helps validating DTS files.
Introduced example binding changes:
1. Fixed reg formatting
2. Swapped #address-cells and #size-cells incorrect values
3. Renamed node: s/phy/ethernet-phy/
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 22 Aug 2021 08:49:04 +0000 (09:49 +0100)]
Merge branch 'dsa-docs'
Vladimir Oltean says:
====================
DSA documentation updates for v5.15
There were some documentation-visible changes made to DSA in the
net-next tree for v5.15. There may be more, but these are the ones I am
aware of.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Sat, 21 Aug 2021 23:04:41 +0000 (02:04 +0300)]
docs: net: dsa: document the new methods for bridge TX forwarding offload
Two new methods have been introduced, add some verbiage about what they do.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Sat, 21 Aug 2021 23:04:40 +0000 (02:04 +0300)]
docs: net: dsa: remove references to struct dsa_device_ops::filter
This function has disappeared in commit
edac6f6332d9 ("Revert "net: dsa:
Allow drivers to filter packets they can decode source port from"").
Also, since commit
4e50025129ef ("net: dsa: generalize overhead for
taggers that use both headers and trailers"), the next paragraph is no
longer true (it is still discouraged to do that, but it is now
supported, so no point in mentioning it). Delete.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Sat, 21 Aug 2021 23:04:39 +0000 (02:04 +0300)]
docs: net: dsa: sja1105: update list of limitations
Remove the paragraphs that talk about the various modes of traffic
support, bridging with foreign interfaces, etc etc. There is nothing
that the user needs to know now, it should all work out of the box as
expected.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Sat, 21 Aug 2021 23:04:38 +0000 (02:04 +0300)]
docs: devlink: remove the references to sja1105
The sja1105 driver has removed its devlink params, so there is nothing
to see here.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 22 Aug 2021 08:44:17 +0000 (09:44 +0100)]
Merge branch 'ipa-autosuspend'
Alex Elder says:
====================
net: ipa: enable automatic suspend
At long last, the first patch in this series enables automatic
suspend managed by the power management core. The remaining two
just rename things to be "power" oriented rather than "clock"
oriented.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder [Fri, 20 Aug 2021 16:01:29 +0000 (11:01 -0500)]
net: ipa: rename "ipa_clock.c"
Finally, rename "ipa_clock.c" to be "ipa_power.c" and "ipa_clock.h"
to be "ipa_power.h".
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder [Fri, 20 Aug 2021 16:01:28 +0000 (11:01 -0500)]
net: ipa: rename ipa_clock_* symbols
Rename a number of functions to clarify that there is no longer a
notion of an "IPA clock," but rather that the functions are more
generally related to IPA power management.
ipa_clock_enable() -> ipa_power_enable()
ipa_clock_disable() -> ipa_power_disable()
ipa_clock_rate() -> ipa_core_clock_rate()
ipa_clock_init() -> ipa_power_init()
ipa_clock_exit() -> ipa_power_exit()
Rename the ipa_clock structure to be ipa_power. Rename all
variables and fields using that structure type "power" rather
than "clock".
Rename the ipa_clock_data structure to be ipa_power_data, and more
broadly, just substitute "power" for "clock" in places that
previously represented things related to the "IPA clock".
Update comments throughout.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder [Fri, 20 Aug 2021 16:01:27 +0000 (11:01 -0500)]
net: ipa: use autosuspend
Use runtime power management autosuspend.
Up until this point, we only suspended the IPA hardware for system
suspend; now we'll suspend it aggressively using runtime power
management, setting the initial autosuspend delay to half a second
of inactivity.
Replace pm_runtime_put() calls with pm_runtime_put_autosuspend(),
call pm_runtime_mark_last_busy() before each of those. In places
where we're shutting things down, or decrementing power references
for errors, use pm_runtime_put_noidle() instead.
Finally, remove ipa_runtime_idle(), so the ->runtime_suspend
callback will occur if idle.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 20 Aug 2021 17:09:22 +0000 (10:09 -0700)]
Merge tag 'mac80211-next-for-net-next-2021-08-20' of git://git./linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
Minor updates:
* BSS coloring support
* MEI commands for Intel platforms
* various fixes/cleanups
* tag 'mac80211-next-for-net-next-2021-08-20' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next:
cfg80211: fix BSS color notify trace enum confusion
mac80211: Fix insufficient headroom issue for AMSDU
mac80211: add support for BSS color change
nl80211: add support for BSS coloring
mac80211: Use flex-array for radiotap header bitmap
mac80211: radiotap: Use BIT() instead of shifts
mac80211: Remove unnecessary variable and label
mac80211: include <linux/rbtree.h>
mac80211: Fix monitor MTU limit so that A-MSDUs get through
mac80211: remove unnecessary NULL check in ieee80211_register_hw()
mac80211: Reject zero MAC address in sta_info_insert_check()
nl80211: vendor-cmd: add Intel vendor commands for iwlmei usage
====================
Link: https://lore.kernel.org/r/20210820105329.48674-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
David S. Miller [Fri, 20 Aug 2021 14:00:35 +0000 (15:00 +0100)]
Merge branch 'bridge-vlan'
Nikolay Aleksandrov says:
====================
net: bridge: mcast: add support for port/vlan router control
This small set adds control over port/vlan mcast router config.
Initially I had added host vlan entry router control via vlan's global
options but that is really unnecessary and we can use a single per-vlan
option to control it both for port/vlan and host/vlan entries. Since
it's all still in net-next we can convert BRIDGE_VLANDB_GOPTS_MCAST_ROUTER
to BRIDGE_VLANDB_ENTRY_MCAST_ROUTER and use it for both. That makes much
more sense and is easier for user-space. Patch 01 prepares the port
router function to be used with port mcast context instead of port and
then patch 02 converts the global vlan mcast router option to per-vlan
mcast router option which directly gives us both host/vlan and port/vlan
mcast router control without any additional changes.
This way we get the following coherent syntax:
[ port/vlan mcast router]
$ bridge vlan set vid 100 dev ens20 mcast_router 2
[ bridge/vlan mcast router ]
$ bridge vlan set vid 100 dev bridge mcast_router 2
instead of:
$ bridge vlan set vid 100 dev bridge mcast_router 1 global
The mcast_router should not be regarded as a global option, it controls
the port/vlan and bridge/vlan mcast router behaviour.
This is the last set needed for the initial per-vlan mcast support.
Next patch-sets:
- iproute2 support
- selftests
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Nikolay Aleksandrov [Fri, 20 Aug 2021 12:42:55 +0000 (15:42 +0300)]
net: bridge: vlan: convert mcast router global option to per-vlan entry
The per-vlan router option controls the port/vlan and host vlan entries'
mcast router config. The global option controlled only the host vlan
config, but that is unnecessary and incosistent as it's not really a
global vlan option, but rather bridge option to control host router
config, so convert BRIDGE_VLANDB_GOPTS_MCAST_ROUTER to
BRIDGE_VLANDB_ENTRY_MCAST_ROUTER which can be used to control both host
vlan and port vlan mcast router config.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nikolay Aleksandrov [Fri, 20 Aug 2021 12:42:54 +0000 (15:42 +0300)]
net: bridge: mcast: br_multicast_set_port_router takes multicast context as argument
Change br_multicast_set_port_router to take port multicast context as
its first argument so we can later use it to control port/vlan mcast
router option.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sunil Goutham [Fri, 20 Aug 2021 08:25:22 +0000 (13:55 +0530)]
octeontx2-pf: Add check for non zero mcam flows
This patch ensures that mcam flows are allocated
before adding or destroying the flows.
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
jing yangyang [Fri, 20 Aug 2021 03:35:27 +0000 (20:35 -0700)]
tools/net: Use bitwise instead of arithmetic operator for flags
This silences the following coccinelle warning:
"WARNING: sum of probable bitmasks, consider |"
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: jing yangyang <jing.yangyang@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 20 Aug 2021 13:45:48 +0000 (14:45 +0100)]
Merge branch 'ipa-kill-off-ipa_clock_get'
Alex Elder says:
====================
net: ipa: kill off ipa_clock_get()
This series replaces the remaining uses of ipa_clock_get() with
calls to pm_runtime_get_sync() instead. It replaces all calls to
ipa_clock_put() with calls to pm_runtime_put().
This completes the preparation for enabling automated suspend under
the control of the power management core code. The next patch (in
an upcoming series) enables that. Then the "ipa_clock" files and
symbols will switch to using an "ipa_power" naming convention instead.
Additional info
It is possible for pm_runtime_get_sync() to return an error. There
are really three cases, identified by return value:
- 1, meaning power was already active
- 0, meaning power was not previously active, but is now
- EACCES, meaning runtime PM is disabled
One additional case is EINVAL, meaning a previous suspend or resume
(or idle) call returned an error. But we have always assumed this
won't happen (we previously didn't even check for an error).
But because we use pm_runtime_force_suspend() to implement system
suspend, there's a chance we'd get an EACCES error (the first thing
that function does is disable runtime suspend). Individual patches
explain what happens in that case, but generally we just accept that
it could be an unlikely problem (occurring only at startup time).
Similarly, pm_runtime_put() could return an error. There too, we
ignore EINVAL, assuming the IPA suspend and resume operations won't
produce an error. EBUSY and EPERM are not applicable, EAGAIN is not
expected (and harmless). We should never get EACCES (runtime
suspend disabled), because pm_runtime_put() calls match prior
pm_runtime_get_sync() calls, and a system suspend will not be
started while a runtime suspend or resume is underway. In summary,
the value returned from pm_runtime_put() is not meaningful, so we
explicitly ignore it.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder [Thu, 19 Aug 2021 22:19:27 +0000 (17:19 -0500)]
net: ipa: kill ipa_clock_get()
The only remaining user of the ipa_clock_{get,put}() interface is
ipa_isr_thread(). Replace calls to ipa_clock_get() there calling
pm_runtime_get_sync() instead. And call pm_runtime_put() there
rather than ipa_clock_put(). Warn if we ever get an error.
With that, we can get rid of ipa_clock_get() and ipa_clock_put().
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder [Thu, 19 Aug 2021 22:19:26 +0000 (17:19 -0500)]
net: ipa: don't use ipa_clock_get() in "ipa_modem.c"
When we open or close the modem network device we need to ensure the
hardware is powered. Replace the callers of ipa_clock_get() found
in ipa_open() and ipa_stop() with calls to pm_runtime_get_sync().
If an error is returned, simply return that error to the caller
(without any error or warning message). This could conceivably
occur if the function was called while the system was suspended,
but that really shouldn't happen. Replace corresponding calls to
ipa_clock_put() with pm_runtime_put() also.
If the modem crashes we also need to ensure the hardware is powered
to recover. If getting power returns an error there's not much we
can do, but at least report the error. (Ideally the remoteproc SSR
code would ensure the AP was not suspended when it sends the
notification, but that is not (yet) the case.)
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder [Thu, 19 Aug 2021 22:19:25 +0000 (17:19 -0500)]
net: ipa: don't use ipa_clock_get() in "ipa_uc.c"
Replace the ipa_clock_get() call in ipa_uc_clock() when taking the
"proxy" clock reference for the microcontroller with a call to
pm_runtime_get_sync(). Replace calls of ipa_clock_put() for the
microcontroller with pm_runtime_put() calls instead.
There is a chance we get an error when taking the microcontroller
power reference. This is an unlikely scenario, where system suspend
is initiated just before we learn the modem is booting. For now
we'll just accept that this could occur, and report it if it does.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder [Thu, 19 Aug 2021 22:19:24 +0000 (17:19 -0500)]
net: ipa: don't use ipa_clock_get() in "ipa_smp2p.c"
If the "modem-init" Device Tree property is present for a platform,
the modem performs early IPA hardware initialization, and signals
this is complete with an "ipa-setup-ready" SMP2P interrupt. This
triggers a call to ipa_setup(), which requires the hardware to be
powered.
Replace the call to ipa_clock_get() in this case with a call to
pm_runtime_get_sync(). And replace the corresponding calls to
ipa_clock_put() with calls to pm_runtime_put() instead.
There is a chance we get an error when taking this power reference.
This is an unlikely scenario, where system suspend is initiated just
before the modem signals it has finished initializing the IPA
hardware. For now we'll just accept that this could occur, and
report it if it does.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder [Thu, 19 Aug 2021 22:19:23 +0000 (17:19 -0500)]
net: ipa: don't use ipa_clock_get() in "ipa_main.c"
We need the hardware to be powered starting at the config stage of
initialization when the IPA driver probes. And we need it powered
when the driver is removed, at least until the deconfig stage has
completed.
Replace callers of ipa_clock_get() in ipa_probe() and ipa_exit(),
calling pm_runtime_get_sync() instead. Replace the corresponding
callers of ipa_clock_put(), calling pm_runtime_put() instead.
The only error we expect when getting power would occur when the
system is suspended. The ->probe and ->remove driver callbacks
won't be called when suspended, so issue a WARN() call if an error
is seen getting power.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder [Thu, 19 Aug 2021 21:12:28 +0000 (16:12 -0500)]
net: ipa: fix TX queue race
Jakub Kicinski pointed out a race condition in ipa_start_xmit() in a
recently-accepted series of patches:
https://lore.kernel.org/netdev/
20210812195035.
2816276-1-elder@linaro.org/
We are stopping the modem TX queue in that function if the power
state is not active. We restart the TX queue again once hardware
resume is complete.
TX path Power Management
------- ----------------
pm_runtime_get(); no power Start resume
Stop TX queue ...
pm_runtime_put() Resume complete
return NETDEV_TX_BUSY Start TX queue
pm_runtime_get()
Power present, transmit
pm_runtime_put() (auto-suspend)
The issue is that the power management (resume) activity and the
network transmit activity can occur concurrently, and there's a
chance the queue will be stopped *after* it has been started again.
TX path Power Management
------- ----------------
Resume underway
pm_runtime_get(); no power ...
Resume complete
Start TX queue
Stop TX queue <-- No more transmits after this
pm_runtime_put()
return NETDEV_TX_BUSY
We address this using a STARTED flag to indicate when the TX queue
has been started from the resume path, and a spinlock to make the
flag and queue updates happen atomically.
TX path Power Management
------- ----------------
Resume underway
pm_runtime_get(); no power Resume complete
start TX queue \
If STARTED flag is *not* set: > atomic
Stop TX queue set STARTED flag /
pm_runtime_put()
return NETDEV_TX_BUSY
A second flag is used to address a different race that involves
another path requesting power.
TX path Other path Power Management
------- ---------- ----------------
pm_runtime_get_sync() Resume
Start TX queue \ atomic
Set STARTED flag /
(do its thing)
pm_runtime_put()
(auto-suspend)
pm_runtime_get() Mark delayed resume
STARTED *is* set, so
do *not* stop TX queue <-- Queue should be stopped here
pm_runtime_put()
return NETDEV_TX_BUSY Suspend done, resume
Resume complete
pm_runtime_get()
Stop TX queue
(STARTED is *not* set) Start TX queue \ atomic
pm_runtime_put() Set STARTED flag /
return NETDEV_TX_BUSY
So a STOPPED flag is set in the transmit path when it has stopped
the TX queue, and this pair of operations is also protected by the
spinlock. The resume path only restarts the TX queue if the STOPPED
flag is set. This case isn't a major problem, but it avoids the
"non-trivial amount of useless work" done by the networking stack
when NETDEV_TX_BUSY is returned.
Fixes:
6b51f802d652b ("net: ipa: ensure hardware has power in ipa_start_xmit()")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 20 Aug 2021 13:39:52 +0000 (14:39 +0100)]
Merge branch 'ocelot-vlan'
Vladimir Oltean says:
====================
Small ocelot VLAN improvements
This small series propagates some VLAN restrictions via netlink extack
and creates some helper functions instead of open-coding VLAN table
manipulations from multiple places.
This is split from the larger "DSA FDB isolation" series, hence the v2
tag:
https://patchwork.kernel.org/project/netdevbpf/cover/
20210818120150.892647-1-vladimir.oltean@nxp.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Thu, 19 Aug 2021 17:40:08 +0000 (20:40 +0300)]
net: mscc: ocelot: use helpers for port VLAN membership
This is a mostly cosmetic patch that creates some helpers for accessing
the VLAN table. These helpers are also a bit more careful in that they
do not modify the ocelot->vlan_mask unless the hardware operation
succeeded.
Not all callers check the return value (the init code doesn't), but anyway.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Thu, 19 Aug 2021 17:40:07 +0000 (20:40 +0300)]
net: mscc: ocelot: transmit the VLAN filtering restrictions via extack
We need to transmit more restrictions in future patches, convert this
one to netlink extack.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Thu, 19 Aug 2021 17:40:06 +0000 (20:40 +0300)]
net: mscc: ocelot: transmit the "native VLAN" error via extack
We need to reject some more configurations in future patches, convert
the existing one to netlink extack.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 20 Aug 2021 13:36:42 +0000 (14:36 +0100)]
Merge branch 'ocelot-phylink-fixes'
Vladimir Oltean says:
====================
Ocelot phylink fixes
This series addresses a regression reported by Horatiu which introduced
by the ocelot conversion to phylink: there are broken device trees in
the wild, and the driver fails to probe the entire switch when a port
fails to probe, which it previously did not do.
Continue probing even when some ports fail to initialize properly.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Thu, 19 Aug 2021 16:49:58 +0000 (19:49 +0300)]
net: mscc: ocelot: allow probing to continue with ports that fail to register
The existing ocelot device trees, like ocelot_pcb123.dts for example,
have SERDES ports (ports 4 and higher) that do not have status = "disabled";
but on the other hand do not have a phy-handle or a fixed-link either.
So from the perspective of phylink, they have broken DT bindings.
Since the blamed commit, probing for the entire switch will fail when
such a device tree binding is encountered on a port. There used to be
this piece of code which skipped ports without a phy-handle:
phy_node = of_parse_phandle(portnp, "phy-handle", 0);
if (!phy_node)
continue;
but now it is gone.
Anyway, fixed-link setups are a thing which should work out of the box
with phylink, so it would not be in the best interest of the driver to
add that check back.
Instead, let's look at what other drivers do. Since commit
86f8b1c01a0a
("net: dsa: Do not make user port errors fatal"), DSA continues after a
switch port fails to register, and works only with the ports that
succeeded.
We can achieve the same behavior in ocelot by unregistering the devlink
port for ports where ocelot_port_phylink_create() failed (called via
ocelot_probe_port), and clear the bit in devlink_ports_registered for
that port. This will make the next iteration reconsider the port that
failed to probe as an unused port, and re-register a devlink port of
type UNUSED for it. No other cleanup should need to be performed, since
ocelot_probe_port() should be self-contained when it fails.
Fixes:
e6e12df625f2 ("net: mscc: ocelot: convert to phylink")
Reported-and-tested-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Horatiu Vultur [Thu, 19 Aug 2021 16:49:57 +0000 (19:49 +0300)]
net: mscc: ocelot: be able to reuse a devlink_port after teardown
There are cases where we would like to continue probing the switch even
if one port has failed to probe. When that happens, we need to
unregister a devlink_port of type DEVLINK_PORT_FLAVOUR_PHYSICAL and
re-register it of type DEVLINK_PORT_FLAVOUR_UNUSED.
This is fine, except when calling devlink_port_attrs_set on a structure
on which devlink_port_register has been previously called, there is a
WARN_ON in devlink_port_attrs_set that devlink_port->devlink must be
NULL.
So don't assume that the memory behind dlp is clean when calling
ocelot_port_devlink_init, just zero-initialize it.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 20 Aug 2021 13:34:49 +0000 (14:34 +0100)]
Merge branch 'dpaa2-switch-phylikn-fixes'
Vladimir Oltean says:
====================
dpaa2-switch phylink fixes
This is fixing two regressions introduced by the recent conversion of
the dpaa2-switch driver to phylink.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Thu, 19 Aug 2021 14:40:19 +0000 (17:40 +0300)]
net: dpaa2-switch: call dpaa2_switch_port_disconnect_mac on probe error path
Currently when probing returns an error, the netdev is freed but
phylink_disconnect is not called.
Create a common function between the unbind path and the error path,
call it the opposite of dpaa2_switch_probe_port: dpaa2_switch_remove_port,
and call it from both the unbind and the error path.
Fixes:
84cba72956fd ("dpaa2-switch: integrate the MAC endpoint support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Thu, 19 Aug 2021 14:40:18 +0000 (17:40 +0300)]
net: dpaa2-switch: phylink_disconnect_phy needs rtnl_lock
There is an ASSERT_RTNL in phylink_disconnect_phy which triggers
whenever dpaa2_switch_port_disconnect_mac is called.
To follow the pattern established by dpaa2_eth_disconnect_mac, take the
rtnl_mutex every time we call dpaa2_switch_port_disconnect_mac.
Fixes:
84cba72956fd ("dpaa2-switch: integrate the MAC endpoint support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 20 Aug 2021 13:31:46 +0000 (14:31 +0100)]
Merge branch 'gmii2rgmii-loopback'
Gerhard Engleder says:
====================
Add Xilinx GMII2RGMII loopback support
The Xilinx GMII2RGMII driver overrides PHY driver functions in order to
configure the device according to the link speed of the PHY attached to
it. This is implemented for a normal link but not for loopback.
Andrew told me to use phy_loopback and this changes make phy_loopback
work in combination with Xilinx GMII2RGMII.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Gerhard Engleder [Thu, 19 Aug 2021 13:11:54 +0000 (15:11 +0200)]
net: phy: gmii2rgmii: Support PHY loopback
Configure speed if loopback is used. read_status is not called for
loopback.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Gerhard Engleder [Thu, 19 Aug 2021 13:11:53 +0000 (15:11 +0200)]
net: phy: Uniform PHY driver access
struct phy_device contains a pointer to the PHY driver and nearly
everywhere this pointer is used to access the PHY driver. Only
mdio_bus_phy_may_suspend() is still using to_phy_driver() instead of the
PHY driver pointer. Uniform PHY driver access by eliminating
to_phy_driver() use in mdio_bus_phy_may_suspend().
Only phy_bus_match() and phy_probe() are still using to_phy_driver(),
because PHY driver pointer is not available there.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Gerhard Engleder [Thu, 19 Aug 2021 13:11:52 +0000 (15:11 +0200)]
net: phy: Support set_loopback override
phy_read_status and various other PHY functions support PHY specific
overriding of driver functions by using a PHY specific pointer to the
PHY driver. Add support of PHY specific override to phy_loopback too.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 20 Aug 2021 13:28:55 +0000 (14:28 +0100)]
Merge branch 'sparx5-dma'
Steen Hegelund says:
====================
Adding Frame DMA functionality to Sparx5
v2:
Removed an unused variable (proc_ctrl) from sparx5_fdma_start.
This add frame DMA functionality to the Sparx5 platform.
Until now the Sparx5 SwitchDev driver has been using register based
injection and extraction when sending frames to/from the host CPU.
With this series the Frame DMA functionality now added.
The Frame DMA is only used if the Frame DMA interrupt is configured in the
device tree; otherwise the existing register based injection and extraction
is used.
The Sparx5 has two ports that can be used for sending and receiving frames,
but there are 8 channels that can be configured: 6 for injection and 2 for
extraction.
The additional channels can be used for more advanced scenarios e.g. where
virtual cores are used, but currently the driver only uses port 0 and
channel 0 and 6 respectively.
DCB (data control block) structures are passed to the Frame DMA with
suitable information about frame start/end etc, as well as pointers to DB
(data blocks) buffers.
The Frame DMA engine can use interrupts to signal back when the frames have
been injected or extracted.
There is a limitation on the DB alignment also for injection: Block must
start on 16byte boundaries, and this is why the driver currently copies the
data to into separate buffers.
The Sparx5 switch core needs a IFH (Internal Frame Header) to pass
information from the port to the switch core, and this header is added
before injection and stripped after extraction.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Steen Hegelund [Thu, 19 Aug 2021 07:39:40 +0000 (09:39 +0200)]
arm64: dts: sparx5: Add the Sparx5 switch frame DMA support
This adds the interrupt for the Sparx5 Frame DMA.
If this configuration is present the Sparx5 SwitchDev driver will use the
Frame DMA feature, and if not it will use register based injection and
extraction for sending and receiving frames to the CPU.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steen Hegelund [Thu, 19 Aug 2021 07:39:39 +0000 (09:39 +0200)]
net: sparx5: switchdev: adding frame DMA functionality
This add frame DMA functionality to the Sparx5 platform.
Ethernet frames can be extracted or injected autonomously to or from the
device’s DDR3/DDR3L memory and/or PCIe memory space. Linked list data
structures in memory are used for injecting or extracting Ethernet frames.
The FDMA generates interrupts when frame extraction or injection is done
and when the linked lists need updating.
The FDMA implements two extraction channels, one per switch core port
towards the VCore CPU system and a total of six injection channels.
Extraction channels are mapped one-to-one to the CPU ports, while injection
channels can be individually assigned to any CPU port.
- FDMA channel 0 through 5 corresponds to CPU port 0 injection direction
FDMA_CH_CFG[channel].CH_INJ_PORT is set to 0.
- FDMA channel 0 through 5 corresponds to CPU port 1 injection direction when
FDMA_CH_CFG[channel].CH_INJ_PORT is set to 1.
- FDMA channel 6 corresponds to CPU port 0 extraction direction.
- FDMA channel 7 corresponds to CPU port 1 extraction direction.
The FDMA implements a strict priority scheme among channels. Extraction
channels are prioritized over injection channels and secondarily channels
with higher channel number are prioritized over channels with lower number.
On the other hand, ports are being served on an equal-bandwidth principle
both on injection and extraction directions. The equal-bandwidth principle
will not force an equal bandwidth. Instead, it ensures that the ports
perform at their best considering the operating conditions.
When more than one injection channel is enabled for injection on the same
CPU port, priority determines which channel can inject data. Ownership
is re-arbitrated on frame boundaries.
The FDMA processes linked lists of DMA Control Block Structures (DCBs). The
DCBs have the same basic structure for both injection and extraction. A DCB
must be placed on a 64-bit word-aligned address in memory. Each DCB has a
per-channel configurable amount of associated data blocks in memory, where
the frame data is stored.
The data blocks that are used by extraction channels must be placed on
64-bit word aligned addresses in memory, and their length must be a
multiple of 128 bytes.
A DCB carries the pointer to the next DCB of the linked list, the INFO word
which holds information for the DCB, and a pair of status word and memory
pointer for every data block that it is associated with.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 20 Aug 2021 12:28:38 +0000 (13:28 +0100)]
Merge tag 'batadv-next-pullrequest-
20210820' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
This (updated) cleanup patchset includes the following patches:
- bump version strings, by Simon Wunderlich
- update docs about move IRC channel away from freenode,
by Sven Eckelmann (updated, added missing sign-off)
- Switch to kstrtox.h for kstrtou64, by Sven Eckelmann
- Update NULL checks, by Sven Eckelmann (2 patches)
- remove remaining skb-copy calls for broadcast packets,
by Linus Lüssing
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 20 Aug 2021 11:49:04 +0000 (12:49 +0100)]
Merge tag 'mlx5-updates-2021-08-19' of git://git./linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2021-08-19
This series introduces the support for two new mlx5 features:
1) Sample offload for tunneled traffic
2) devlink rate objects support
1) From Chris Mi: Sample offload for tunneled traffic
=====================================================
Background and solution
-----------------------
Currently the sample offload actions send the encapsulated packet
to software. This series de-capsulates the packet before performing
the sampling and set the tunnel properties on the skb metadata
fields to make the behavior consistent with OVS sFlow.
If de-capsulating first, we can't use the same match like before in
default table. So instantiate a post action instance to continue
processing the action list. If HW can preserve reg_c, also use the
post action instance.
Post action infrastructure
--------------------------
Some tc actions are modeled in hardware using multiple tables
causing a tc action list split. For example, CT action is modeled
by jumping to a ct table which is controlled by nf flow table.
sFlow jumps in hardware to a sample table, which continues to a
"default table" where it should continue processing the action list.
Multi table actions are modeled in hardware using a unique fte_id.
The fte_id is set before jumping to a table. Split actions continue
to a post-action table where the matched fte_id value continues the
execution the tc action list.
This series also introduces post action infrastructure. Both ct and
sample use it.
Sample for tunnel in TC SW
--------------------------
tc filter add dev vxlan1 protocol ip parent ffff: prio 3 \
flower src_mac 24:25:d0:e1:00:00 dst_mac 02:25:d0:13:01:02 \
enc_src_ip 192.168.1.14 enc_dst_ip 192.168.1.13 \
enc_dst_port 4789 enc_key_id 4 \
action sample rate 1 group 6 \
action tunnel_key unset \
action mirred egress redirect dev enp4s0f0_1
MLX5 sample HW offload
----------------------
For the following typical flow table:
+-------------------------------+
+ original flow table +
+-------------------------------+
+ original match +
+-------------------------------+
+ sample action + other actions +
+-------------------------------+
We translate the tc filter with sample action to the following HW model:
+---------------------+
+ original flow table +
+---------------------+
+ original match +
+---------------------+
| set fte_id (if reg_c preserve cap)
| do decap
v
+------------------------------------------------+
+ Flow Sampler Object +
+------------------------------------------------+
+ sample ratio +
+------------------------------------------------+
+ sample table id | default table id +
+------------------------------------------------+
| |
v v
+-----------------------------+ +-------------------+
+ sample table + + default table +
+-----------------------------+ +-------------------+
+ forward to management vport + |
+-----------------------------+ |
+-------+------+
| |reg_c preserve cap
| |or decap action
v v
+-----------------+ +-------------+
+ per vport table + + post action +
+-----------------+ +-------------+
+ original match +
+-----------------+
+ other actions +
+-----------------+
2) From Dmytro Linkin: devlink rate object support for mlx5_core driver
=======================================================================
HIGH-LEVEL OVERVIEW
Devlink leaf rate objects created per vport (VF/SF, and PF on BlueField)
in switchdev mode on devlink port registration.
Implement devlink ops callbacks to create/destroy rate groups, set TX
rate values of the vport/group, assign vport to the group.
Driver accepts TX rate values as fraction of 1Mbps.
Refactor existing eswitch QoS infrastructure to be accessible by legacy
NDO rate API and new devlink rate API. NDO rate API is not
removed/disabled in switchdev mode to not break existing users. Rate
values configured with NDO rate API are not visible for devlink
infrastructure, therefore APIs should not be used simultaneously.
IMPLEMENTATION DETAILS
Driver provide two level rate hierarchy to manage bandwidth - group
level and vport level. Initially each vport added to internal unlimited
group created by default. Each rate element (vport or group) receive
bandwidth relative to its parent element (for groups the parent is a
physical link itself) in a Round Robin manner, where element get
bandwidth value according to its weight. Example:
Created four rate groups with tx_share limits:
$ devlink port function rate add \
pci/0000:06:00.0/group_1 tx_share 30gbit
$ devlink port function rate add \
pci/0000:06:00.0/group_2 tx_share 20gbit
$ devlink port function rate add \
pci/0000:06:00.0/group_3 tx_share 20gbit
$ devlink port function rate add \
pci/0000:06:00.0/group_4 tx_share 10gbit
Weights created in HW for each group are relative to the bigest tx_share
value, which is 30gbit:
<group_1> 1.0
<group_2> 0.67
<group_3> 0.67
<group_4> 0.33
Assuming link speed is 50 Gbit/sec and each group can sustain such
amount of traffic, maximum bandwidth is 50 / (1.0 + 0.67 + 0.67 + 0.33)
= ~18.75 Gbit/sec. Normilized bandwidth values for groups:
<group_1> 18.75 * 1.0 = 18.75 Gbit/sec
<group_2> 18.75 * 0.67 = 12.5 Gbit/sec
<group_3> 18.75 * 0.67 = 12.5 Gbit/sec
<group_4> 18.75 * 0.33 = 6.25 Gbit/sec
If in example above group_1 doesn't produce any traffic, then maximum
bandwidth becomes 50 / (0.67 + 0.67 + 0.33) = ~30.0 Gbit/sec. Normalized
values:
<group_2> 30.0 * 0.67 = 20.0 Gbit/sec
<group_3> 30.0 * 0.67 = 20.0 Gbit/sec
<group_4> 30.0 * 0.33 = 10.0 Gbit/sec
Same normalization applied to each vport in the group.
Normalized values are internal, therefore driver provides QoS
tracepoints for next events:
* vport rate element creation/deletion:
* vport rate element configuration;
* group rate element creation/deletion;
* group rate element configuration.
PATCHES OVERVIEW
1 - Moving and isolation of eswitch QoS logic in separate file;
2 - Implement devlink leaf rate object support for vports;
3 - Implement rate groups creation/deletion;
4 - Implement TX rate management for the groups;
5 - Implement parent set for vports;
6 - Eswitch QoS tracepoints.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 20 Aug 2021 11:16:05 +0000 (12:16 +0100)]
Merge tag 'for-net-next-2021-08-19' of git://git./linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
- Add support for Foxconn Mediatek Chip
- Add support for LG LGSBWAC92/TWCM-K505D
- hci_h5 flow control fixes and suspend support
- Switch to use lock_sock for SCO and RFCOMM
- Various fixes for extended advertising
- Reword Intel's setup on btusb unifying the supported generations
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 20 Aug 2021 11:04:50 +0000 (12:04 +0100)]
Merge tag 'batadv-next-pullrequest-
20210819' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
This cleanup patchset includes the following patches:
- bump version strings, by Simon Wunderlich
- update docs about move IRC channel away from freenode,
by Sven Eckelmann
- Switch to kstrtox.h for kstrtou64, by Sven Eckelmann
- Update NULL checks, by Sven Eckelmann (2 patches)
- remove remaining skb-copy calls for broadcast packets,
by Linus Lüssing
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Lüssing [Sun, 16 May 2021 22:33:09 +0000 (00:33 +0200)]
batman-adv: bcast: remove remaining skb-copy calls
We currently have two code paths for broadcast packets:
A) self-generated, via batadv_interface_tx()->
batadv_send_bcast_packet().
B) received/forwarded, via batadv_recv_bcast_packet()->
batadv_forw_bcast_packet().
For A), self-generated broadcast packets:
The only modifications to the skb data is the ethernet header which is
added/pushed to the skb in
batadv_send_broadcast_skb()->batadv_send_skb_packet(). However before
doing so, batadv_skb_head_push() is called which calls skb_cow_head() to
unshare the space for the to be pushed ethernet header. So for this
case, it is safe to use skb clones.
For B), received/forwarded packets:
The same applies as in A) for the to be forwarded packets. Only the
ethernet header is added. However after (queueing for) forwarding the
packet in batadv_recv_bcast_packet()->batadv_forw_bcast_packet(), a
packet is additionally decapsulated and is sent up the stack through
batadv_recv_bcast_packet()->batadv_interface_rx().
Protocols higher up the stack are already required to check if the
packet is shared and create a copy for further modifications. When the
next (protocol) layer works correctly, it cannot happen that it tries to
operate on the data behind the skb clone which is still queued up for
forwarding.
Co-authored-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Sven Eckelmann [Sun, 8 Aug 2021 17:11:08 +0000 (19:11 +0200)]
batman-adv: Drop NULL check before dropping references
The check if a batman-adv related object is NULL or not is now directly in
the batadv_*_put functions. It is not needed anymore to perform this check
outside these function:
The changes were generated using a coccinelle semantic patch:
@@
expression E;
@@
- if (likely(E != NULL))
(
batadv_backbone_gw_put
|
batadv_claim_put
|
batadv_dat_entry_put
|
batadv_gw_node_put
|
batadv_hardif_neigh_put
|
batadv_hardif_put
|
batadv_nc_node_put
|
batadv_nc_path_put
|
batadv_neigh_ifinfo_put
|
batadv_neigh_node_put
|
batadv_orig_ifinfo_put
|
batadv_orig_node_put
|
batadv_orig_node_vlan_put
|
batadv_softif_vlan_put
|
batadv_tp_vars_put
|
batadv_tt_global_entry_put
|
batadv_tt_local_entry_put
|
batadv_tt_orig_list_entry_put
|
batadv_tt_req_node_put
|
batadv_tvlv_container_put
|
batadv_tvlv_handler_put
)(E);
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Sven Eckelmann [Sun, 8 Aug 2021 17:56:17 +0000 (19:56 +0200)]
batman-adv: Check ptr for NULL before reducing its refcnt
The commit
b37a46683739 ("netdevice: add the case if dev is NULL") changed
the way how the NULL check for net_devices have to be handled when trying
to reduce its reference counter. Before this commit, it was the
responsibility of the caller to check whether the object is NULL or not.
But it was changed to behave more like kfree. Now the callee has to handle
the NULL-case.
The batman-adv code was scanned via cocinelle for similar places. These
were changed to use the paradigm
@@
identifier E, T, R, C;
identifier put;
@@
void put(struct T *E)
{
+ if (!E)
+ return;
kref_put(&E->C, R);
}
Functions which were used in other sources files were moved to the header
to allow the compiler to inline the NULL check and the kref_put call.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Sven Eckelmann [Fri, 23 Jul 2021 17:23:17 +0000 (19:23 +0200)]
batman-adv: Switch to kstrtox.h for kstrtou64
The commit
4c52729377ea ("kernel.h: split out kstrtox() and simple_strtox()
to a separate header") moved the kstrtou64 function to a new header called
linux/kstrtox.h.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Sven Eckelmann [Sun, 13 Jun 2021 14:37:47 +0000 (16:37 +0200)]
batman-adv: Move IRC channel to hackint.org
Due to recent developments around the Freenode.org IRC network, the
opinions about the usage of this service shifted dramatically. The majority
of the still active users of the #batman channel prefers a move to the
hackint.org network.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Dmytro Linkin [Tue, 1 Jun 2021 10:24:00 +0000 (13:24 +0300)]
net/mlx5: E-switch, Add QoS tracepoints
Add tracepoints to log QoS enabling/disabling/configuration for vports
and rate groups.
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Huy Nguyen <huyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Dmytro Linkin [Tue, 1 Jun 2021 09:37:39 +0000 (12:37 +0300)]
net/mlx5: E-switch, Allow to add vports to rate groups
Implement eswitch API that allows updating rate groups. If group
pointer is NULL, then move the vport to internal unlimited group zero.
Implement devlink_ops->rate_parent_node_set() callback in the terms of
the new eswitch group update API.
Enable QoS for all group's elements if a group has allocated BW share.
Co-developed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Huy Nguyen <huyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Dmytro Linkin [Mon, 31 May 2021 15:19:50 +0000 (18:19 +0300)]
net/mlx5: E-switch, Allow setting share/max tx rate limits of rate groups
Provide eswitch API to allow controlling group rate limits. Use it to
implement devlink_ops->mlx5_devlink_rate_node_tx_{share|max}_set().
The share rate will create relative bandwidth share on the groups level
while within the group the user can set shared rate on the member vports
of that group and this rate will be relative to the group's share rate.
The group with the highest shared rate will get a BW share of 100 and
the rest of the groups will get a value that reflects the ratio between
their share rate and the maximum share rate.
Example:
Created four rate groups with tx_share limits:
$ devlink port function rate add \
pci/0000:06:00.0/group_1 tx_share 30gbit
$ devlink port function rate add \
pci/0000:06:00.0/group_2 tx_share 20gbit
$ devlink port function rate add \
pci/0000:06:00.0/group_3 tx_share 20gbit
$ devlink port function rate add \
pci/0000:06:00.0/group_4 tx_share 10gbit
Assuming link speed is 50 Gbit/sec ratio divider will be
50 / (30+20+20+10) = 0.625. Normalized rate values for the groups:
<group_1> 30 * 0.625 = 18.75 Gbit/sec
<group_2> 20 * 0.625 = 12.5 Gbit/sec
<group_3> 20 * 0.625 = 12.5 Gbit/sec
<group_4> 10 * 0.625 = 6.25 Gbit/sec
Rate group with unlimited tx_share rate will receive minimum BW value
(1Mbit/sec) if presented any group with tx_share rate limit. This allow
to not drop all packets in case of heavy traffic.
Co-developed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Huy Nguyen <huyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Dmytro Linkin [Mon, 31 May 2021 14:08:14 +0000 (17:08 +0300)]
net/mlx5: E-switch, Introduce rate limiting groups API
Extend eswitch API with rate limiting groups:
- Define new struct mlx5_esw_rate_group that is used to hold all
internal group data.
- Implement functions that allow creation, destruction and cleanup of
groups.
- Assign all vports to internal unlimited zero group by default.
This commit lays the groundwork for group rate limiting by implementing
devlink_ops->rate_node_{new|del}() callbacks to support creating and
deleting groups through devlink rate node objects. APIs that allows
setting rates and adding/removing members are implemented in following
patches.
Co-developed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Huy Nguyen <huyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Dmytro Linkin [Fri, 28 May 2021 14:42:15 +0000 (17:42 +0300)]
net/mlx5: E-switch, Enable devlink port tx_{share|max} rate control
Register devlink rate leaf object for every eswitch vport.
Implement devlink ops that enable setting shared and max tx rates
through devlink API.
Extract common eswitch code from existing tx rate set function that is
accessed through NDO to be reused for the devlink. Values configured
with NDO API are not visible for the devlink API, therefore shouldn't be
used simultaneously.
When normalizing the BW share value, dividing the desired minimum rate
by the common divider results in losing information since the quotient
is rounded down. This has a significant affect on configurations of low
rate where the round down eliminates a large percentage of the total
rate. To improve the formula, round up the division result to make sure
that the BW share is at least the value it was supposed to be and won't
lost a significant amount of the expected value.
Co-developed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Huy Nguyen <huyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Dmytro Linkin [Fri, 28 May 2021 14:30:22 +0000 (17:30 +0300)]
net/mlx5: E-switch, Move QoS related code to dedicated file
Move eswitch QoS related code into dedicated file. Provide eswitch API
to access this code meaning it is isolated and restricted to be used
only by eswitch.c. Exception is legacy NDO vf set rate, which moved to
esw/legacy.c.
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Huy Nguyen <huyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Chris Mi [Mon, 21 Jun 2021 07:49:50 +0000 (10:49 +0300)]
net/mlx5e: TC, Support sample offload action for tunneled traffic
Currently the sample offload actions send the encapsulated packet
to software. This commit decapsulates the packet before performing
the sampling and set the tunnel properties on the skb metadata
fields to make the behavior consistent with OVS sFlow.
If decapsulating first, we can't use the same match like before in
default table. So instantiate a post action instance to continue
processing the action list. If HW can preserve reg_c, also use the
post action instance.
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Chris Mi [Fri, 30 Apr 2021 07:17:33 +0000 (10:17 +0300)]
net/mlx5e: TC, Restore tunnel info for sample offload
Currently the sample offload actions send the encapsulated packet
to software. sFlow expects tunneled packets to be decapsulated while
having the tunnel properties on the skb metadata fields.
Reuse the functions used by connection tracking to map the outer
header properties to a unique id. The next patch will use that id
to restore the tunnel information of decapsulated packets onto the
skb.
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Chris Mi [Fri, 30 Apr 2021 09:08:40 +0000 (12:08 +0300)]
net/mlx5e: TC, Remove CONFIG_NET_TC_SKB_EXT dependency when restoring tunnel
CONFIG_NET_TC_SKB_EXT controls the SKB extension support for
restoring chain ids. SKB extension is not required for tunnel
restoration.
Remove the CONFIG_NET_TC_SKB_EXT dependency as a pre-step for
using the tunnel restore methods for sample offload use cases.
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Chris Mi [Tue, 17 Aug 2021 03:23:09 +0000 (11:23 +0800)]
net/mlx5e: Refactor ct to use post action infrastructure
Move post action table management to common library providing
add/del/get API. Refactor the ct action offload to use the common
API.
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Chris Mi [Mon, 16 Aug 2021 14:00:30 +0000 (22:00 +0800)]
net/mlx5e: Introduce post action infrastructure
Some tc actions are modeled in hardware using multiple tables
causing a tc action list split. For example, CT action is modeled
by jumping to a ct table which is controlled by nf flowtable.
sFlow jumps in hardware to a sample table, which continues to a
"default table" where it should continue processing the action list.
Multi table actions are modeled in hardware using a unique fte_id.
The fte_id is set before jumping to a table. Split actions continue
to a post-action table where the matched fte_id value continues the
execution the tc action list.
Currently the post-action design is implemented only by the ct
action. Introduce post action infrastructure as a pre-step for
reusing it with the sFlow offload feature. Init and destroy the
common post action table. Refactor the ct offload to use the
common post table infrastructure in the next patch.
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Chris Mi [Wed, 2 Jun 2021 03:23:08 +0000 (06:23 +0300)]
net/mlx5e: CT, Use xarray to manage fte ids
IDR is deprecated. Use xarray instead.
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Chris Mi [Wed, 18 Aug 2021 12:18:57 +0000 (20:18 +0800)]
net/mlx5e: Move sample attribute to flow attribute
Currently it is in eswitch attribute. Move it to flow attribute to
reflect the change in previous patch.
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Chris Mi [Wed, 18 Aug 2021 07:52:18 +0000 (15:52 +0800)]
net/mlx5e: Move esw/sample to en/tc/sample
Module sample belongs to en/tc instead of esw. Move it and rename
accordingly.
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Saeed Mahameed [Mon, 16 Aug 2021 18:58:19 +0000 (11:58 -0700)]
net/mlx5e: Remove mlx5e dependency from E-Switch sample
mlx5/esw/sample.c doesn't really need mlx5e_priv object, we can remove
this redundant dependency by passing the eswitch object directly to
the sample object constructor.
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Jakub Kicinski [Fri, 20 Aug 2021 01:09:18 +0000 (18:09 -0700)]
Merge git://git./linux/kernel/git/netdev/net
drivers/ptp/Kconfig:
55c8fca1dae1 ("ptp_pch: Restore dependency on PCI")
e5f31552674e ("ethernet: fix PTP_1588_CLOCK dependencies")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Thu, 19 Aug 2021 19:33:43 +0000 (12:33 -0700)]
Merge tag 'net-5.14-rc7' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes, including fixes from bpf, wireless and mac80211
trees.
Current release - regressions:
- tipc: call tipc_wait_for_connect only when dlen is not 0
- mac80211: fix locking in ieee80211_restart_work()
Current release - new code bugs:
- bpf: add rcu_read_lock in bpf_get_current_[ancestor_]cgroup_id()
- ethernet: ice: fix perout start time rounding
- wwan: iosm: prevent underflow in ipc_chnl_cfg_get()
Previous releases - regressions:
- bpf: clear zext_dst of dead insns
- sch_cake: fix srchost/dsthost hashing mode
- vrf: reset skb conntrack connection on VRF rcv
- net/rds: dma_map_sg is entitled to merge entries
Previous releases - always broken:
- ethernet: bnxt: fix Tx path locking and races, add Rx path
barriers"
* tag 'net-5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (42 commits)
net: dpaa2-switch: disable the control interface on error path
Revert "flow_offload: action should not be NULL when it is referenced"
iavf: Fix ping is lost after untrusted VF had tried to change MAC
i40e: Fix ATR queue selection
r8152: fix the maximum number of PLA bp for RTL8153C
r8152: fix writing USB_BP2_EN
mptcp: full fully established support after ADD_ADDR
mptcp: fix memory leak on address flush
net/rds: dma_map_sg is entitled to merge entries
net: mscc: ocelot: allow forwarding from bridge ports to the tag_8021q CPU port
net: asix: fix uninit value bugs
ovs: clear skb->tstamp in forwarding path
net: mdio-mux: Handle -EPROBE_DEFER correctly
net: mdio-mux: Don't ignore memory allocation errors
net: mdio-mux: Delete unnecessary devm_kfree
net: dsa: sja1105: fix use-after-free after calling of_find_compatible_node, or worse
sch_cake: fix srchost/dsthost hashing mode
ixgbe, xsk: clean up the resources in ixgbe_xsk_pool_enable error path
net: qlcnic: add missed unlock in qlcnic_83xx_flash_read32
mac80211: fix locking in ieee80211_restart_work()
...
Linus Torvalds [Thu, 19 Aug 2021 19:19:58 +0000 (12:19 -0700)]
Merge tag 'platform-drivers-x86-v5.14-4' of git://git./linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- Enable SW_TABLET_MODE support for the TP200s
- Enable WMI on two more Gigabyte motherboards
* tag 'platform-drivers-x86-v5.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: gigabyte-wmi: add support for B450M S2H V2
platform/x86: gigabyte-wmi: add support for X570 GAMING X
platform/x86: asus-nb-wmi: Add tablet_mode_sw=lid-flip quirk for the TP200s
platform/x86: asus-nb-wmi: Allow configuring SW_TABLET_MODE method with a module option
Colin Ian King [Wed, 18 Aug 2021 13:09:27 +0000 (14:09 +0100)]
octeontx2-af: remove redudant second error check on variable err
A recent change added error checking messages and failed to remove one
of the previous error checks. There are now two checks on variable err
so the second one is redundant dead code and can be removed.
Addresses-Coverity: ("Logically dead code")
Fixes:
a83bdada06bf ("octeontx2-af: Add debug messages for failures")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210818130927.33895-1-colin.king@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 19 Aug 2021 18:51:13 +0000 (11:51 -0700)]
Merge tag 'linux-can-next-for-5.15-
20210819' of git://git./linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
linux-can-next-for-5.15-
20210819
The first patch is by me, for the mailmap file and maps the email
address of two former ESD employees to a newly created role account.
The next 3 patches are by Oleksij Rempel and add support for GPIO
based switchable CAN bus termination.
The next 3 patches are by Vincent Mailhol. The first one changes the
CAN netlink interface to not bail out if the user switched off
unsupported features. The next one adds Vincent as the maintainer of
the etas_es58x driver and the last one cleans up the documentation of
struct es58x_fd_tx_conf_msg.
The next patch is by me, for the mcp251xfd driver and marks some
instances of struct mcp251xfd_priv as const. Lad Prabhakar contributes
2 patches for the rcar_canfd driver, that add support for RZ/G2L
family.
The next 5 patches target the m_can/tcan45x5 driver. 2 are by me an
fix trivial checkpatch warnings. The remaining 3 patches are by Matt
Kline and improve the performance on the SPI based tcan4x5x chip by
batching FIFO reads and writes.
The last 7 patches are for the c_can driver. Dario Binacchi's patch
converts the DT bindings to yaml, 2 patches by me fix a typo and
rename a macro to properly represent the usage. The last 4 patches are
again by Dario Binacchi and provide a performance improvement for the
TX path by operating the TX mailboxes as a true FIFO.
* tag 'linux-can-next-for-5.15-
20210819' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (22 commits)
can: c_can: cache frames to operate as a true FIFO
can: c_can: support tx ring algorithm
can: c_can: exit c_can_do_tx() early if no frames have been sent
can: c_can: remove struct c_can_priv::priv field
can: c_can: rename IF_RX -> IF_NAPI
can: c_can: c_can_do_tx(): fix typo in comment
dt-bindings: net: can: c_can: convert to json-schema
can: m_can: Batch FIFO writes during CAN transmit
can: m_can: Batch FIFO reads during CAN receive
can: m_can: Disable IRQs on FIFO bus errors
can: m_can: fix block comment style
can: tcan4x5x: cdev_to_priv(): remove stray empty line
can: rcar_canfd: Add support for RZ/G2L family
dt-bindings: net: can: renesas,rcar-canfd: Document RZ/G2L SoC
can: mcp251xfd: mark some instances of struct mcp251xfd_priv as const
can: etas_es58x: clean-up documentation of struct es58x_fd_tx_conf_msg
MAINTAINERS: add Vincent MAILHOL as maintainer for the ETAS ES58X CAN/USB driver
can: netlink: allow user to turn off unsupported features
can: dev: provide optional GPIO based termination support
dt-bindings: can: fsl,flexcan: enable termination-* bindings
...
====================
Link: https://lore.kernel.org/r/20210819133913.657715-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Thu, 19 Aug 2021 14:17:55 +0000 (17:17 +0300)]
net: dpaa2-switch: disable the control interface on error path
Currently dpaa2_switch_takedown has a funny name and does not do the
opposite of dpaa2_switch_init, which makes probing fail when we need to
handle an -EPROBE_DEFER.
A sketch of what dpaa2_switch_init does:
dpsw_open
dpaa2_switch_detect_features
dpsw_reset
for (i = 0; i < ethsw->sw_attr.num_ifs; i++) {
dpsw_if_disable
dpsw_if_set_stp
dpsw_vlan_remove_if_untagged
dpsw_if_set_tci
dpsw_vlan_remove_if
}
dpsw_vlan_remove
alloc_ordered_workqueue
dpsw_fdb_remove
dpaa2_switch_ctrl_if_setup
When dpaa2_switch_takedown is called from the error path of
dpaa2_switch_probe(), the control interface, enabled by
dpaa2_switch_ctrl_if_setup from dpaa2_switch_init, remains enabled,
because dpaa2_switch_takedown does not call
dpaa2_switch_ctrl_if_teardown.
Since dpaa2_switch_probe might fail due to EPROBE_DEFER of a PHY, this
means that a second probe of the driver will happen with the control
interface directly enabled.
This will trigger a second error:
[ 93.273528] fsl_dpaa2_switch dpsw.0: dpsw_ctrl_if_set_pools() failed
[ 93.281966] fsl_dpaa2_switch dpsw.0: fsl_mc_driver_probe failed: -13
[ 93.288323] fsl_dpaa2_switch: probe of dpsw.0 failed with error -13
Which if we investigate the /dev/dpaa2_mc_console log, we find out is
caused by:
[E, ctrl_if_set_pools:2211, DPMNG] ctrl_if must be disabled
So make dpaa2_switch_takedown do the opposite of dpaa2_switch_init (in
reasonable limits, no reason to change STP state, re-add VLANs etc), and
rename it to something more conventional, like dpaa2_switch_teardown.
Fixes:
613c0a5810b7 ("staging: dpaa2-switch: enable the control interface")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20210819141755.1931423-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel [Thu, 19 Aug 2021 10:58:42 +0000 (13:58 +0300)]
Revert "flow_offload: action should not be NULL when it is referenced"
This reverts commit
9ea3e52c5bc8bb4a084938dc1e3160643438927a.
Cited commit added a check to make sure 'action' is not NULL, but
'action' is already dereferenced before the check, when calling
flow_offload_has_one_action().
Therefore, the check does not make any sense and results in a smatch
warning:
include/net/flow_offload.h:322 flow_action_mixed_hw_stats_check() warn:
variable dereferenced before check 'action' (see line 319)
Fix by reverting this commit.
Cc: gushengxian <gushengxian@yulong.com>
Fixes:
9ea3e52c5bc8 ("flow_offload: action should not be NULL when it is referenced")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20210819105842.1315705-1-idosch@idosch.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 19 Aug 2021 16:56:42 +0000 (09:56 -0700)]
Merge branch 'intel-wired-lan-driver-updates-2021-08-18'
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2021-08-18
This series contains updates to i40e and iavf drivers.
Arkadiusz fixes Flow Director not using the correct queue due to calling
the wrong pick Tx function for i40e.
Sylwester resolves traffic loss for iavf when it attempts to change its
MAC address when it does not have permissions to do so.
====================
Link: https://lore.kernel.org/r/20210818174217.4138922-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sylwester Dziedziuch [Wed, 18 Aug 2021 17:42:17 +0000 (10:42 -0700)]
iavf: Fix ping is lost after untrusted VF had tried to change MAC
Make changes to MAC address dependent on the response of PF.
Disallow changes to HW MAC address and MAC filter from untrusted
VF, thanks to that ping is not lost if VF tries to change MAC.
Add a new field in iavf_mac_filter, to indicate whether there
was response from PF for given filter. Based on this field pass
or discard the filter.
If untrusted VF tried to change it's address, it's not changed.
Still filter was changed, because of that ping couldn't go through.
Fixes:
c5c922b3e09b ("iavf: fix MAC address setting for VFs when filter is rejected")
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Gurucharan G <Gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Arkadiusz Kubalewski [Wed, 18 Aug 2021 17:42:16 +0000 (10:42 -0700)]
i40e: Fix ATR queue selection
Without this patch, ATR does not work. Receive/transmit uses queue
selection based on SW DCB hashing method.
If traffic classes are not configured for PF, then use
netdev_pick_tx function for selecting queue for packet transmission.
Instead of calling i40e_swdcb_skb_tx_hash, call netdev_pick_tx,
which ensures that packet is transmitted/received from CPU that is
running the application.
Reproduction steps:
1. Load i40e driver
2. Map each MSI interrupt of i40e port for each CPU
3. Disable ntuple, enable ATR i.e.:
ethtool -K $interface ntuple off
ethtool --set-priv-flags $interface flow-director-atr
4. Run application that is generating traffic and is bound to a
single CPU, i.e.:
taskset -c 9 netperf -H 1.1.1.1 -t TCP_RR -l 10
5. Observe behavior:
Application's traffic should be restricted to the CPU provided in
taskset.
Fixes:
89ec1f0886c1 ("i40e: Fix queue-to-TC mapping on Tx")
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 19 Aug 2021 15:58:16 +0000 (08:58 -0700)]
Merge https://git./linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2021-08-19
We've added 3 non-merge commits during the last 3 day(s) which contain
a total of 3 files changed, 29 insertions(+), 6 deletions(-).
The main changes are:
1) Fix to clear zext_dst for dead instructions which was causing invalid program
rejections on JITs with bpf_jit_needs_zext such as s390x, from Ilya Leoshkevich.
2) Fix RCU splat in bpf_get_current_{ancestor_,}cgroup_id() helpers when they are
invoked from sleepable programs, from Yonghong Song.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests, bpf: Test that dead ldx_w insns are accepted
bpf: Clear zext_dst of dead insns
bpf: Add rcu_read_lock in bpf_get_current_[ancestor_]cgroup_id() helpers
====================
Link: https://lore.kernel.org/r/20210819144904.20069-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
projects / linux-2.6-microblaze.git / log