Martin KaFai Lau [Wed, 9 Mar 2022 09:05:09 +0000 (01:05 -0800)]
bpf: Remove BPF_SKB_DELIVERY_TIME_NONE and rename s/delivery_time_/tstamp_/
This patch is to simplify the uapi bpf.h regarding to the tstamp type
and use a similar way as the kernel to describe the value stored
in __sk_buff->tstamp.
My earlier thought was to avoid describing the semantic and
clock base for the rcv timestamp until there is more clarity
on the use case, so the __sk_buff->delivery_time_type naming instead
of __sk_buff->tstamp_type.
With some thoughts, it can reuse the UNSPEC naming. This patch first
removes BPF_SKB_DELIVERY_TIME_NONE and also
rename BPF_SKB_DELIVERY_TIME_UNSPEC to BPF_SKB_TSTAMP_UNSPEC
and BPF_SKB_DELIVERY_TIME_MONO to BPF_SKB_TSTAMP_DELIVERY_MONO.
The semantic of BPF_SKB_TSTAMP_DELIVERY_MONO is the same:
__sk_buff->tstamp has delivery time in mono clock base.
BPF_SKB_TSTAMP_UNSPEC means __sk_buff->tstamp has the (rcv)
tstamp at ingress and the delivery time at egress. At egress,
the clock base could be found from skb->sk->sk_clockid.
__sk_buff->tstamp == 0 naturally means NONE, so NONE is not needed.
With BPF_SKB_TSTAMP_UNSPEC for the rcv tstamp at ingress,
the __sk_buff->delivery_time_type is also renamed to __sk_buff->tstamp_type
which was also suggested in the earlier discussion:
https://lore.kernel.org/bpf/
b181acbe-caf8-502d-4b7b-
7d96b9fc5d55@iogearbox.net/
The above will then make __sk_buff->tstamp and __sk_buff->tstamp_type
the same as its kernel skb->tstamp and skb->mono_delivery_time
counter part.
The internal kernel function bpf_skb_convert_dtime_type_read() is then
renamed to bpf_skb_convert_tstamp_type_read() and it can be simplified
with the BPF_SKB_DELIVERY_TIME_NONE gone. A BPF_ALU32_IMM(BPF_AND)
insn is also saved by using BPF_JMP32_IMM(BPF_JSET).
The bpf helper bpf_skb_set_delivery_time() is also renamed to
bpf_skb_set_tstamp(). The arg name is changed from dtime
to tstamp also. It only allows setting tstamp 0 for
BPF_SKB_TSTAMP_UNSPEC and it could be relaxed later
if there is use case to change mono delivery time to
non mono.
prog->delivery_time_access is also renamed to prog->tstamp_type_access.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220309090509.3712315-1-kafai@fb.com
Martin KaFai Lau [Wed, 9 Mar 2022 09:05:02 +0000 (01:05 -0800)]
bpf: Simplify insn rewrite on BPF_WRITE __sk_buff->tstamp
BPF_JMP32_IMM(BPF_JSET) is used to save a BPF_ALU32_IMM(BPF_AND).
The skb->tc_at_ingress and skb->mono_delivery_time are at the same
offset, so only one BPF_LDX_MEM(BPF_B) is needed.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220309090502.3711982-1-kafai@fb.com
Martin KaFai Lau [Wed, 9 Mar 2022 09:04:56 +0000 (01:04 -0800)]
bpf: Simplify insn rewrite on BPF_READ __sk_buff->tstamp
The skb->tc_at_ingress and skb->mono_delivery_time are at the same
byte offset. Thus, only one BPF_LDX_MEM(BPF_B) is needed
and both bits can be tested together.
/* BPF_READ: a = __sk_buff->tstamp */
if (skb->tc_at_ingress && skb->mono_delivery_time)
a = 0;
else
a = skb->tstamp;
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220309090456.3711530-1-kafai@fb.com
Martin KaFai Lau [Wed, 9 Mar 2022 09:04:50 +0000 (01:04 -0800)]
bpf: net: Remove TC_AT_INGRESS_OFFSET and SKB_MONO_DELIVERY_TIME_OFFSET macro
This patch removes the TC_AT_INGRESS_OFFSET and
SKB_MONO_DELIVERY_TIME_OFFSET macros. Instead, PKT_VLAN_PRESENT_OFFSET
is used because all of them are at the same offset. Comment is added to
make it clear that changing the position of tc_at_ingress or
mono_delivery_time will require to adjust the defined macros.
The earlier discussion can be found here:
https://lore.kernel.org/bpf/
419d994e-ff61-7c11-0ec7-
11fefcb0186e@iogearbox.net/
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220309090450.3710955-1-kafai@fb.com
Yihao Han [Thu, 10 Mar 2022 09:28:27 +0000 (01:28 -0800)]
bpf, test_run: Use kvfree() for memory allocated with kvmalloc()
It is allocated with kvmalloc(), the corresponding release function
should not be kfree(), use kvfree() instead.
Generated by: scripts/coccinelle/api/kfree_mismatch.cocci
Fixes:
b530e9e1063e ("bpf: Add "live packet" mode for XDP in BPF_PROG_RUN")
Signed-off-by: Yihao Han <hanyihao@vivo.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20220310092828.13405-1-hanyihao@vivo.com
Toke Høiland-Jørgensen [Thu, 10 Mar 2022 11:02:28 +0000 (12:02 +0100)]
bpf: Initialise retval in bpf_prog_test_run_xdp()
The kernel test robot pointed out that the newly added
bpf_test_run_xdp_live() runner doesn't set the retval in the caller (by
design), which means that the variable can be passed unitialised to
bpf_test_finish(). Fix this by initialising the variable properly.
Fixes:
b530e9e1063e ("bpf: Add "live packet" mode for XDP in BPF_PROG_RUN")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220310110228.161869-1-toke@redhat.com
Niklas Söderlund [Thu, 10 Mar 2022 12:18:46 +0000 (13:18 +0100)]
bpftool: Restore support for BPF offload-enabled feature probing
Commit
1a56c18e6c2e4e74 ("bpftool: Stop supporting BPF offload-enabled
feature probing") removed the support to probe for BPF offload features.
This is still something that is useful for NFP NIC that can support
offloading of BPF programs.
The reason for the dropped support was that libbpf starting with v1.0
would drop support for passing the ifindex to the BPF prog/map/helper
feature probing APIs. In order to keep this useful feature for NFP
restore the functionality by moving it directly into bpftool.
The code restored is a simplified version of the code that existed in
libbpf which supposed passing the ifindex. The simplification is that it
only targets the cases where ifindex is given and call into libbpf for
the cases where it's not.
Before restoring support for probing offload features:
# bpftool feature probe dev ens4np0
Scanning system call availability...
bpf() syscall is available
Scanning eBPF program types...
Scanning eBPF map types...
Scanning eBPF helper functions...
eBPF helpers supported for program type sched_cls:
eBPF helpers supported for program type xdp:
Scanning miscellaneous eBPF features...
Large program size limit is NOT available
Bounded loop support is NOT available
ISA extension v2 is NOT available
ISA extension v3 is NOT available
With support for probing offload features restored:
# bpftool feature probe dev ens4np0
Scanning system call availability...
bpf() syscall is available
Scanning eBPF program types...
eBPF program_type sched_cls is available
eBPF program_type xdp is available
Scanning eBPF map types...
eBPF map_type hash is available
eBPF map_type array is available
Scanning eBPF helper functions...
eBPF helpers supported for program type sched_cls:
- bpf_map_lookup_elem
- bpf_get_prandom_u32
- bpf_perf_event_output
eBPF helpers supported for program type xdp:
- bpf_map_lookup_elem
- bpf_get_prandom_u32
- bpf_perf_event_output
- bpf_xdp_adjust_head
- bpf_xdp_adjust_tail
Scanning miscellaneous eBPF features...
Large program size limit is NOT available
Bounded loop support is NOT available
ISA extension v2 is NOT available
ISA extension v3 is NOT available
Signed-off-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20220310121846.921256-1-niklas.soderlund@corigine.com
Alexei Starovoitov [Wed, 9 Mar 2022 22:19:23 +0000 (14:19 -0800)]
Merge branch 'Add support for transmitting packets using XDP in bpf_prog_run()'
Toke Høiland-Jørgensen says:
====================
This series adds support for transmitting packets using XDP in
bpf_prog_run(), by enabling a new mode "live packet" mode which will handle
the XDP program return codes and redirect the packets to the stack or other
devices.
The primary use case for this is testing the redirect map types and the
ndo_xdp_xmit driver operation without an external traffic generator. But it
turns out to also be useful for creating a programmable traffic generator
in XDP, as well as injecting frames into the stack. A sample traffic
generator, which was included in previous versions of the series, but now
moved to xdp-tools, transmits up to 9 Mpps/core on my test machine.
To transmit the frames, the new mode instantiates a page_pool structure in
bpf_prog_run() and initialises the pages to contain XDP frames with the
data passed in by userspace. These frames can then be handled as though
they came from the hardware XDP path, and the existing page_pool code takes
care of returning and recycling them. The setup is optimised for high
performance with a high number of repetitions to support stress testing and
the traffic generator use case; see patch 1 for details.
v11:
- Fix override of return code in xdp_test_run_batch()
- Add Martin's ACKs to remaining patches
v10:
- Only propagate memory allocation errors from xdp_test_run_batch()
- Get rid of BPF_F_TEST_XDP_RESERVED; batch_size can be used to probe
- Check that batch_size is unset in non-XDP test_run funcs
- Lower the number of repetitions in the selftest to 10k
- Count number of recycled pages in the selftest
- Fix a few other nits from Martin, carry forward ACKs
v9:
- XDP_DROP packets in the selftest to ensure pages are recycled
- Fix a few issues reported by the kernel test robot
- Rewrite the documentation of the batch size to make it a bit clearer
- Rebase to newest bpf-next
v8:
- Make the batch size configurable from userspace
- Don't interrupt the packet loop on errors in do_redirect (this can be
caught from the tracepoint)
- Add documentation of the feature
- Add reserved flag userspace can use to probe for support (kernel didn't
check flags previously)
- Rebase to newest bpf-next, disallow live mode for jumbo frames
v7:
- Extend the local_bh_disable() to cover the full test run loop, to prevent
running concurrently with the softirq. Fixes a deadlock with veth xmit.
- Reinstate the forwarding sysctl setting in the selftest, and bump up the
number of packets being transmitted to trigger the above bug.
- Update commit message to make it clear that user space can select the
ingress interface.
v6:
- Fix meta vs data pointer setting and add a selftest for it
- Add local_bh_disable() around code passing packets up the stack
- Create a new netns for the selftest and use a TC program instead of the
forwarding hack to count packets being XDP_PASS'ed from the test prog.
- Check for the correct ingress ifindex in the selftest
- Rebase and drop patches 1-5 that were already merged
v5:
- Rebase to current bpf-next
v4:
- Fix a few code style issues (Alexei)
- Also handle the other return codes: XDP_PASS builds skbs and injects them
into the stack, and XDP_TX is turned into a redirect out the same
interface (Alexei).
- Drop the last patch adding an xdp_trafficgen program to samples/bpf; this
will live in xdp-tools instead (Alexei).
- Add a separate bpf_test_run_xdp_live() function to test_run.c instead of
entangling the new mode in the existing bpf_test_run().
v3:
- Reorder patches to make sure they all build individually (Patchwork)
- Remove a couple of unused variables (Patchwork)
- Remove unlikely() annotation in slow path and add back John's ACK that I
accidentally dropped for v2 (John)
v2:
- Split up up __xdp_do_redirect to avoid passing two pointers to it (John)
- Always reset context pointers before each test run (John)
- Use get_mac_addr() from xdp_sample_user.h instead of rolling our own (Kumar)
- Fix wrong offset for metadata pointer
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Toke Høiland-Jørgensen [Wed, 9 Mar 2022 10:53:46 +0000 (11:53 +0100)]
selftests/bpf: Add selftest for XDP_REDIRECT in BPF_PROG_RUN
This adds a selftest for the XDP_REDIRECT facility in BPF_PROG_RUN, that
redirects packets into a veth and counts them using an XDP program on the
other side of the veth pair and a TC program on the local side of the veth.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220309105346.100053-6-toke@redhat.com
Toke Høiland-Jørgensen [Wed, 9 Mar 2022 10:53:45 +0000 (11:53 +0100)]
selftests/bpf: Move open_netns() and close_netns() into network_helpers.c
These will also be used by the xdp_do_redirect test being added in the next
commit.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220309105346.100053-5-toke@redhat.com
Toke Høiland-Jørgensen [Wed, 9 Mar 2022 10:53:44 +0000 (11:53 +0100)]
libbpf: Support batch_size option to bpf_prog_test_run
Add support for setting the new batch_size parameter to BPF_PROG_TEST_RUN
to libbpf; just add it as an option and pass it through to the kernel.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220309105346.100053-4-toke@redhat.com
Toke Høiland-Jørgensen [Wed, 9 Mar 2022 10:53:43 +0000 (11:53 +0100)]
Documentation/bpf: Add documentation for BPF_PROG_RUN
This adds documentation for the BPF_PROG_RUN command; a short overview of
the command itself, and a more verbose description of the "live packet"
mode for XDP introduced in the previous commit.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220309105346.100053-3-toke@redhat.com
Toke Høiland-Jørgensen [Wed, 9 Mar 2022 10:53:42 +0000 (11:53 +0100)]
bpf: Add "live packet" mode for XDP in BPF_PROG_RUN
This adds support for running XDP programs through BPF_PROG_RUN in a mode
that enables live packet processing of the resulting frames. Previous uses
of BPF_PROG_RUN for XDP returned the XDP program return code and the
modified packet data to userspace, which is useful for unit testing of XDP
programs.
The existing BPF_PROG_RUN for XDP allows userspace to set the ingress
ifindex and RXQ number as part of the context object being passed to the
kernel. This patch reuses that code, but adds a new mode with different
semantics, which can be selected with the new BPF_F_TEST_XDP_LIVE_FRAMES
flag.
When running BPF_PROG_RUN in this mode, the XDP program return codes will
be honoured: returning XDP_PASS will result in the frame being injected
into the networking stack as if it came from the selected networking
interface, while returning XDP_TX and XDP_REDIRECT will result in the frame
being transmitted out that interface. XDP_TX is translated into an
XDP_REDIRECT operation to the same interface, since the real XDP_TX action
is only possible from within the network drivers themselves, not from the
process context where BPF_PROG_RUN is executed.
Internally, this new mode of operation creates a page pool instance while
setting up the test run, and feeds pages from that into the XDP program.
The setup cost of this is amortised over the number of repetitions
specified by userspace.
To support the performance testing use case, we further optimise the setup
step so that all pages in the pool are pre-initialised with the packet
data, and pre-computed context and xdp_frame objects stored at the start of
each page. This makes it possible to entirely avoid touching the page
content on each XDP program invocation, and enables sending up to 9
Mpps/core on my test box.
Because the data pages are recycled by the page pool, and the test runner
doesn't re-initialise them for each run, subsequent invocations of the XDP
program will see the packet data in the state it was after the last time it
ran on that particular page. This means that an XDP program that modifies
the packet before redirecting it has to be careful about which assumptions
it makes about the packet content, but that is only an issue for the most
naively written programs.
Enabling the new flag is only allowed when not setting ctx_out and data_out
in the test specification, since using it means frames will be redirected
somewhere else, so they can't be returned.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220309105346.100053-2-toke@redhat.com
Andrii Nakryiko [Wed, 9 Mar 2022 01:39:29 +0000 (17:39 -0800)]
Merge branch 'BPF test_progs tests improvement'
Mykola Lysenko says:
====================
First patch reduces the sample_freq to 1000 to ensure test will
work even when kernel.perf_event_max_sample_rate was reduced to 1000.
Patches for send_signal and find_vma tune the test implementation to
make sure needed thread is scheduled. Also, both tests will finish as
soon as possible after the test condition is met.
====================
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Mykola Lysenko [Tue, 8 Mar 2022 20:04:49 +0000 (12:04 -0800)]
Improve stability of find_vma BPF test
Remove unneeded spleep and increase length of dummy CPU
intensive computation to guarantee test process execution.
Also, complete aforemention computation as soon as
test success criteria is met
Signed-off-by: Mykola Lysenko <mykolal@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220308200449.1757478-4-mykolal@fb.com
Mykola Lysenko [Tue, 8 Mar 2022 20:04:48 +0000 (12:04 -0800)]
Improve send_signal BPF test stability
Substitute sleep with dummy CPU intensive computation.
Finish aforemention computation as soon as signal was
delivered to the test process. Make the BPF code to
only execute when PID global variable is set
Signed-off-by: Mykola Lysenko <mykolal@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220308200449.1757478-3-mykolal@fb.com
Mykola Lysenko [Tue, 8 Mar 2022 20:04:47 +0000 (12:04 -0800)]
Improve perf related BPF tests (sample_freq issue)
Linux kernel may automatically reduce kernel.perf_event_max_sample_rate
value when running tests in parallel on slow systems. Linux kernel checks
against this limit when opening perf event with freq=1 parameter set.
The lower bound is 1000. This patch reduces sample_freq value to 1000
in all BPF tests that use sample_freq to ensure they always can open
perf event.
Signed-off-by: Mykola Lysenko <mykolal@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220308200449.1757478-2-mykolal@fb.com
Adrian Ratiu [Tue, 8 Mar 2022 12:14:28 +0000 (14:14 +0200)]
tools: Fix unavoidable GCC call in Clang builds
In ChromeOS and Gentoo we catch any unwanted mixed Clang/LLVM
and GCC/binutils usage via toolchain wrappers which fail builds.
This has revealed that GCC is called unconditionally in Clang
configured builds to populate GCC_TOOLCHAIN_DIR.
Allow the user to override CLANG_CROSS_FLAGS to avoid the GCC
call - in our case we set the var directly in the ebuild recipe.
In theory Clang could be able to autodetect these settings so
this logic could be removed entirely, but in practice as the
commit
cebdb7374577 ("tools: Help cross-building with clang")
mentions, this does not always work, so giving distributions
more control to specify their flags & sysroot is beneficial.
Suggested-by: Manoj Gupta <manojgupta@chromium.com>
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/lkml/87czjk4osi.fsf@ryzen9.i-did-not-set--mail-host-address--so-tickle-me
Link: https://lore.kernel.org/bpf/20220308121428.81735-1-adrian.ratiu@collabora.com
Felix Maurer [Thu, 3 Mar 2022 11:15:26 +0000 (12:15 +0100)]
selftests/bpf: Make test_lwt_ip_encap more stable and faster
In test_lwt_ip_encap, the ingress IPv6 encap test failed from time to
time. The failure occured when an IPv4 ping through the IPv6 GRE
encapsulation did not receive a reply within the timeout. The IPv4 ping
and the IPv6 ping in the test used different timeouts (1 sec for IPv4
and 6 sec for IPv6), probably taking into account that IPv6 might need
longer to successfully complete. However, when IPv4 pings (with the
short timeout) are encapsulated into the IPv6 tunnel, the delays of IPv6
apply.
The actual reason for the long delays with IPv6 was that the IPv6
neighbor discovery sometimes did not complete in time. This was caused
by the outgoing interface only having a tentative link local address,
i.e., not having completed DAD for that lladdr. The ND was successfully
retried after 1 sec but that was too late for the ping timeout.
The IPv6 addresses for the test were already added with nodad. However,
for the lladdrs, DAD was still performed. We now disable DAD in the test
netns completely and just assume that the two lladdrs on each veth pair
do not collide. This removes all the delays for IPv6 traffic in the
test.
Without the delays, we can now also reduce the delay of the IPv6 ping to
1 sec. This makes the whole test complete faster because we don't need
to wait for the excessive timeout for each IPv6 ping that is supposed
to fail.
Fixes:
0fde56e4385b0 ("selftests: bpf: add test_lwt_ip_encap selftest")
Signed-off-by: Felix Maurer <fmaurer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/4987d549d48b4e316cd5b3936de69c8d4bc75a4f.1646305899.git.fmaurer@redhat.com
Shung-Hsi Yu [Mon, 7 Mar 2022 05:29:18 +0000 (13:29 +0800)]
bpf: Determine buf_info inside check_buffer_access()
Instead of determining buf_info string in the caller of check_buffer_access(),
we can determine whether the register type is read-only through
type_is_rdonly_mem() helper inside check_buffer_access() and construct
buf_info, making the code slightly cleaner.
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/YiWYLnAkEZXBP/gH@syu-laptop
KP Singh [Mon, 7 Mar 2022 13:30:48 +0000 (13:30 +0000)]
bpf/docs: Update list of architectures supported.
vmtest.sh also supports s390x now.
Signed-off-by: KP Singh <kpsingh@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220307133048.1287644-2-kpsingh@kernel.org
KP Singh [Mon, 7 Mar 2022 13:30:47 +0000 (13:30 +0000)]
bpf/docs: Update vmtest docs for static linking
Dynamic linking when compiling on the host can cause issues when the
libc version does not match the one in the VM image. Update the
docs to explain how to do this.
Before:
./vmtest.sh -- ./test_progs -t test_ima
./test_progs: /usr/lib/libc.so.6: version `GLIBC_2.33' not found (required by ./test_progs)
After:
LDLIBS=-static ./vmtest.sh -- ./test_progs -t test_ima
test_ima:OK
Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED
Reported-by: "Geyslan G. Bem" <geyslan@gmail.com>
Signed-off-by: KP Singh <kpsingh@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220307133048.1287644-1-kpsingh@kernel.org
Yuntao Wang [Sat, 5 Mar 2022 16:10:13 +0000 (00:10 +0800)]
bpf: Remove redundant slash
The trailing slash of LIBBPF_SRCS is redundant, remove it. Also inline
it as its only used in LIBBPF_INCLUDE.
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220305161013.361646-1-ytcoode@gmail.com
Guo Zhengkui [Sun, 6 Mar 2022 02:34:26 +0000 (10:34 +0800)]
libbpf: Fix array_size.cocci warning
Fix the following coccicheck warning:
tools/lib/bpf/bpf.c:114:31-32: WARNING: Use ARRAY_SIZE
tools/lib/bpf/xsk.c:484:34-35: WARNING: Use ARRAY_SIZE
tools/lib/bpf/xsk.c:485:35-36: WARNING: Use ARRAY_SIZE
It has been tested with gcc (Debian 8.3.0-6) 8.3.0 on x86_64.
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220306023426.19324-1-guozhengkui@vivo.com
Yuntao Wang [Fri, 4 Mar 2022 07:04:08 +0000 (15:04 +0800)]
bpf: Replace strncpy() with strscpy()
Using strncpy() on NUL-terminated strings is considered deprecated[1].
Moreover, if the length of 'task->comm' is less than the destination buffer
size, strncpy() will NUL-pad the destination buffer, which is a needless
performance penalty.
Replacing strncpy() with strscpy() fixes all these issues.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220304070408.233658-1-ytcoode@gmail.com
lic121 [Tue, 1 Mar 2022 13:26:23 +0000 (13:26 +0000)]
libbpf: Unmap rings when umem deleted
xsk_umem__create() does mmap for fill/comp rings, but xsk_umem__delete()
doesn't do the unmap. This works fine for regular cases, because
xsk_socket__delete() does unmap for the rings. But for the case that
xsk_socket__create_shared() fails, umem rings are not unmapped.
fill_save/comp_save are checked to determine if rings have already be
unmapped by xsk. If fill_save and comp_save are NULL, it means that the
rings have already been used by xsk. Then they are supposed to be
unmapped by xsk_socket__delete(). Otherwise, xsk_umem__delete() does the
unmap.
Fixes:
2f6324a3937f ("libbpf: Support shared umems between queues and devices")
Signed-off-by: Cheng Li <lic121@chinatelecom.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220301132623.GA19995@vscode.7~
Alexei Starovoitov [Sun, 6 Mar 2022 02:38:15 +0000 (18:38 -0800)]
Merge branch 'bpf: add __percpu tagging in vmlinux BTF'
Hao Luo says:
====================
This patchset is very much similar to Yonghong's patchset on adding
__user tagging [1], where a "user" btf_type_tag was introduced to
describe __user memory pointers. Similar approach can be applied on
__percpu pointers. The __percpu attribute in kernel is used to identify
pointers that point to memory allocated in percpu region. Normally,
accessing __percpu memory requires using special functions like
per_cpu_ptr() etc. Directly accessing __percpu pointer is meaningless.
Currently vmlinux BTF does not have a way to differentiate a __percpu
pointer from a regular pointer. So BPF programs are allowed to load
__percpu memory directly, which is an incorrect behavior.
With the previous work that encodes __user information in BTF, a nice
framework has been set up to allow us to encode __percpu information in
BTF and let the verifier to reject programs that try to directly access
percpu pointer. Previously, there is a PTR_TO_PERCPU_BTF_ID reg type which
is used to represent those percpu static variables in the kernel. Pahole
is able to collect variables that are stored in ".data..percpu" section
in the kernel image and emit BTF information for those variables. The
bpf_per_cpu_ptr() and bpf_this_cpu_ptr() helper functions were added to
access these variables. Now with __percpu information, we can tag those
__percpu fields in a struct (such as cgroup->rstat_cpu) and allow the
pair of bpf percpu helpers to access them as well.
In addition to adding __percpu tagging, this patchset also fixes a
harmless bug in the previous patch that introduced __user. Patch 01/04
is for that. Patch 02/04 adds the new attribute "percpu". Patch 03/04
adds MEM_PERCPU tag for PTR_TO_BTF_ID and replaces PTR_TO_PERCPU_BTF_ID
with (BTF_ID | MEM_PERCPU). Patch 04/04 refactors the btf_tag test a bit
and adds tests for percpu tag.
Like [1], the minimal requirements for btf_type_tag is
clang (>= clang14) and pahole (>= 1.23).
[1] https://lore.kernel.org/bpf/
20211220015110.3rqxk5qwub3pa2gh@ast-mbp.dhcp.thefacebook.com/t/
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Hao Luo [Fri, 4 Mar 2022 19:16:57 +0000 (11:16 -0800)]
selftests/bpf: Add a test for btf_type_tag "percpu"
Add test for percpu btf_type_tag. Similar to the "user" tag, we test
the following cases:
1. __percpu struct field.
2. __percpu as function parameter.
3. per_cpu_ptr() accepts dynamically allocated __percpu memory.
Because the test for "user" and the test for "percpu" are very similar,
a little bit of refactoring has been done in btf_tag.c. Basically, both
tests share the same function for loading vmlinux and module btf.
Example output from log:
> ./test_progs -v -t btf_tag
libbpf: prog 'test_percpu1': BPF program load failed: Permission denied
libbpf: prog 'test_percpu1': -- BEGIN PROG LOAD LOG --
...
; g = arg->a;
1: (61) r1 = *(u32 *)(r1 +0)
R1 is ptr_bpf_testmod_btf_type_tag_1 access percpu memory: off=0
...
test_btf_type_tag_mod_percpu:PASS:btf_type_tag_percpu 0 nsec
#26/6 btf_tag/btf_type_tag_percpu_mod1:OK
libbpf: prog 'test_percpu2': BPF program load failed: Permission denied
libbpf: prog 'test_percpu2': -- BEGIN PROG LOAD LOG --
...
; g = arg->p->a;
2: (61) r1 = *(u32 *)(r1 +0)
R1 is ptr_bpf_testmod_btf_type_tag_1 access percpu memory: off=0
...
test_btf_type_tag_mod_percpu:PASS:btf_type_tag_percpu 0 nsec
#26/7 btf_tag/btf_type_tag_percpu_mod2:OK
libbpf: prog 'test_percpu_load': BPF program load failed: Permission denied
libbpf: prog 'test_percpu_load': -- BEGIN PROG LOAD LOG --
...
; g = (__u64)cgrp->rstat_cpu->updated_children;
2: (79) r1 = *(u64 *)(r1 +48)
R1 is ptr_cgroup_rstat_cpu access percpu memory: off=48
...
test_btf_type_tag_vmlinux_percpu:PASS:btf_type_tag_percpu_load 0 nsec
#26/8 btf_tag/btf_type_tag_percpu_vmlinux_load:OK
load_btfs:PASS:could not load vmlinux BTF 0 nsec
test_btf_type_tag_vmlinux_percpu:PASS:btf_type_tag_percpu 0 nsec
test_btf_type_tag_vmlinux_percpu:PASS:btf_type_tag_percpu_helper 0 nsec
#26/9 btf_tag/btf_type_tag_percpu_vmlinux_helper:OK
Signed-off-by: Hao Luo <haoluo@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220304191657.981240-5-haoluo@google.com
Hao Luo [Fri, 4 Mar 2022 19:16:56 +0000 (11:16 -0800)]
bpf: Reject programs that try to load __percpu memory.
With the introduction of the btf_type_tag "percpu", we can add a
MEM_PERCPU to identify those pointers that point to percpu memory.
The ability of differetiating percpu pointers from regular memory
pointers have two benefits:
1. It forbids unexpected use of percpu pointers, such as direct loads.
In kernel, there are special functions used for accessing percpu
memory. Directly loading percpu memory is meaningless. We already
have BPF helpers like bpf_per_cpu_ptr() and bpf_this_cpu_ptr() that
wrap the kernel percpu functions. So we can now convert percpu
pointers into regular pointers in a safe way.
2. Previously, bpf_per_cpu_ptr() and bpf_this_cpu_ptr() only work on
PTR_TO_PERCPU_BTF_ID, a special reg_type which describes static
percpu variables in kernel (we rely on pahole to encode them into
vmlinux BTF). Now, since we can identify __percpu tagged pointers,
we can also identify dynamically allocated percpu memory as well.
It means we can use bpf_xxx_cpu_ptr() on dynamic percpu memory.
This would be very convenient when accessing fields like
"cgroup->rstat_cpu".
Signed-off-by: Hao Luo <haoluo@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220304191657.981240-4-haoluo@google.com
Hao Luo [Fri, 4 Mar 2022 19:16:55 +0000 (11:16 -0800)]
compiler_types: Define __percpu as __attribute__((btf_type_tag("percpu")))
This is similar to commit
7472d5a642c9 ("compiler_types: define __user as
__attribute__((btf_type_tag("user")))"), where a type tag "user" was
introduced to identify the pointers that point to user memory. With that
change, the newest compile toolchain can encode __user information into
vmlinux BTF, which can be used by the BPF verifier to enforce safe
program behaviors.
Similarly, we have __percpu attribute, which is mainly used to indicate
memory is allocated in percpu region. The __percpu pointers in kernel
are supposed to be used together with functions like per_cpu_ptr() and
this_cpu_ptr(), which perform necessary calculation on the pointer's
base address. Without the btf_type_tag introduced in this patch,
__percpu pointers will be treated as regular memory pointers in vmlinux
BTF and BPF programs are allowed to directly dereference them, generating
incorrect behaviors. Now with "percpu" btf_type_tag, the BPF verifier is
able to differentiate __percpu pointers from regular pointers and forbids
unexpected behaviors like direct load.
The following is an example similar to the one given in commit
7472d5a642c9:
[$ ~] cat test.c
#define __percpu __attribute__((btf_type_tag("percpu")))
int foo(int __percpu *arg) {
return *arg;
}
[$ ~] clang -O2 -g -c test.c
[$ ~] pahole -JV test.o
...
File test.o:
[1] INT int size=4 nr_bits=32 encoding=SIGNED
[2] TYPE_TAG percpu type_id=1
[3] PTR (anon) type_id=2
[4] FUNC_PROTO (anon) return=1 args=(3 arg)
[5] FUNC foo type_id=4
[$ ~]
for the function argument "int __percpu *arg", its type is described as
PTR -> TYPE_TAG(percpu) -> INT
The kernel can use this information for bpf verification or other
use cases.
Like commit
7472d5a642c9, this feature requires clang (>= clang14) and
pahole (>= 1.23).
Signed-off-by: Hao Luo <haoluo@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220304191657.981240-3-haoluo@google.com
Hao Luo [Fri, 4 Mar 2022 19:16:54 +0000 (11:16 -0800)]
bpf: Fix checking PTR_TO_BTF_ID in check_mem_access
With the introduction of MEM_USER in
commit
c6f1bfe89ac9 ("bpf: reject program if a __user tagged memory accessed in kernel way")
PTR_TO_BTF_ID can be combined with a MEM_USER tag. Therefore, most
likely, when we compare reg_type against PTR_TO_BTF_ID, we want to use
the reg's base_type. Previously the check in check_mem_access() wants
to say: if the reg is BTF_ID but not NULL, the execution flow falls
into the 'then' branch. But now a reg of (BTF_ID | MEM_USER), which
should go into the 'then' branch, goes into the 'else'.
The end results before and after this patch are the same: regs tagged
with MEM_USER get rejected, but not in a way we intended. So fix the
condition, the error message now is correct.
Before (log from commit
696c39011538):
$ ./test_progs -v -n 22/3
...
libbpf: prog 'test_user1': BPF program load failed: Permission denied
libbpf: prog 'test_user1': -- BEGIN PROG LOAD LOG --
R1 type=ctx expected=fp
0: R1=ctx(id=0,off=0,imm=0) R10=fp0
; int BPF_PROG(test_user1, struct bpf_testmod_btf_type_tag_1 *arg)
0: (79) r1 = *(u64 *)(r1 +0)
func 'bpf_testmod_test_btf_type_tag_user_1' arg0 has btf_id 136561 type STRUCT 'bpf_testmod_btf_type_tag_1'
1: R1_w=user_ptr_bpf_testmod_btf_type_tag_1(id=0,off=0,imm=0)
; g = arg->a;
1: (61) r1 = *(u32 *)(r1 +0)
R1 invalid mem access 'user_ptr_'
Now:
libbpf: prog 'test_user1': BPF program load failed: Permission denied
libbpf: prog 'test_user1': -- BEGIN PROG LOAD LOG --
R1 type=ctx expected=fp
0: R1=ctx(id=0,off=0,imm=0) R10=fp0
; int BPF_PROG(test_user1, struct bpf_testmod_btf_type_tag_1 *arg)
0: (79) r1 = *(u64 *)(r1 +0)
func 'bpf_testmod_test_btf_type_tag_user_1' arg0 has btf_id 104036 type STRUCT 'bpf_testmod_btf_type_tag_1'
1: R1_w=user_ptr_bpf_testmod_btf_type_tag_1(id=0,ref_obj_id=0,off=0,imm=0)
; g = arg->a;
1: (61) r1 = *(u32 *)(r1 +0)
R1 is ptr_bpf_testmod_btf_type_tag_1 access user memory: off=0
Note the error message for the reason of rejection.
Fixes:
c6f1bfe89ac9 ("bpf: reject program if a __user tagged memory accessed in kernel way")
Signed-off-by: Hao Luo <haoluo@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220304191657.981240-2-haoluo@google.com
Alexei Starovoitov [Sat, 5 Mar 2022 23:29:36 +0000 (15:29 -0800)]
Merge branch 'Fixes for bad PTR_TO_BTF_ID offset'
Kumar Kartikeya Dwivedi says:
====================
This set fixes a bug related to bad var_off being permitted for kfunc call in
case of PTR_TO_BTF_ID, consolidates offset checks for all register types allowed
as helper or kfunc arguments into a common shared helper, and introduces a
couple of other checks to harden the kfunc release logic and prevent future
bugs. Some selftests are also included that fail in absence of these fixes,
serving as demonstration of the issues being fixed.
Changelog:
----------
v3 -> v4:
v3: https://lore.kernel.org/bpf/
20220304000508.
2904128-1-memxor@gmail.com
* Update commit message for __diag patch to say clang instead of LLVM (Nathan)
* Address nits for check_func_arg_reg_off (Martin)
* Add comment for fixed_off_ok case, remove is_kfunc check (Martin)
v2 -> v3:
v2: https://lore.kernel.org/bpf/
20220303045029.
2645297-1-memxor@gmail.com
* Add my SoB to __diag for clang patch (Nathan)
v1 -> v2:
v1: https://lore.kernel.org/bpf/
20220301065745.
1634848-1-memxor@gmail.com
* Put reg->off check for release kfunc inside check_func_arg_reg_off,
make the check a bit more readable
* Squash verifier selftests errstr update into patch 3 for bisect (Alexei)
* Include fix from Nathan for clang warning about missing prototypes
* Add unified __diag_ingore_all that works for both GCC/LLVM (Alexei)
Older discussion:
Link: https://lore.kernel.org/bpf/20220219113744.1852259-1-memxor@gmail.com
Kumar Kartikeya Dwivedi (7):
bpf: Add check_func_arg_reg_off function
bpf: Fix PTR_TO_BTF_ID var_off check
bpf: Disallow negative offset in check_ptr_off_reg
bpf: Harden register offset checks for release helpers and kfuncs
compiler_types.h: Add unified __diag_ignore_all for GCC/LLVM
bpf: Replace __diag_ignore with unified __diag_ignore_all
selftests/bpf: Add tests for kfunc register offset checks
====================
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Kumar Kartikeya Dwivedi [Fri, 4 Mar 2022 22:46:45 +0000 (04:16 +0530)]
selftests/bpf: Add tests for kfunc register offset checks
Include a few verifier selftests that test against the problems being
fixed by previous commits, i.e. release kfunc always require
PTR_TO_BTF_ID fixed and var_off to be 0, and negative offset is not
permitted and returns a helpful error message.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220304224645.3677453-9-memxor@gmail.com
Kumar Kartikeya Dwivedi [Fri, 4 Mar 2022 22:46:44 +0000 (04:16 +0530)]
bpf: Replace __diag_ignore with unified __diag_ignore_all
Currently, -Wmissing-prototypes warning is ignored for GCC, but not
clang. This leads to clang build warning in W=1 mode. Since the flag
used by both compilers is same, we can use the unified __diag_ignore_all
macro that works for all supported versions and compilers which have
__diag macro support (currently GCC >= 8.0, and Clang >= 11.0).
Also add nf_conntrack_bpf.h include to prevent missing prototype warning
for register_nf_conntrack_bpf.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220304224645.3677453-8-memxor@gmail.com
Kumar Kartikeya Dwivedi [Fri, 4 Mar 2022 22:46:43 +0000 (04:16 +0530)]
compiler_types.h: Add unified __diag_ignore_all for GCC/LLVM
Add a __diag_ignore_all macro, to ignore warnings for both GCC and LLVM,
without having to specify the compiler type and version. By default, GCC
8 and clang 11 are used. This will be used by bpf subsystem to ignore
-Wmissing-prototypes warning for functions that are meant to be global
functions so that they are in vmlinux BTF, but don't have a prototype.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220304224645.3677453-7-memxor@gmail.com
Nathan Chancellor [Fri, 4 Mar 2022 22:46:42 +0000 (04:16 +0530)]
compiler-clang.h: Add __diag infrastructure for clang
Add __diag macros similar to those in compiler-gcc.h, so that warnings
that need to be adjusted for specific cases but not globally can be
ignored when building with clang.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220304224645.3677453-6-memxor@gmail.com
[ Kartikeya: wrote commit message ]
Kumar Kartikeya Dwivedi [Fri, 4 Mar 2022 22:46:41 +0000 (04:16 +0530)]
bpf: Harden register offset checks for release helpers and kfuncs
Let's ensure that the PTR_TO_BTF_ID reg being passed in to release BPF
helpers and kfuncs always has its offset set to 0. While not a real
problem now, there's a very real possibility this will become a problem
when more and more kfuncs are exposed, and more BPF helpers are added
which can release PTR_TO_BTF_ID.
Previous commits already protected against non-zero var_off. One of the
case we are concerned about now is when we have a type that can be
returned by e.g. an acquire kfunc:
struct foo {
int a;
int b;
struct bar b;
};
... and struct bar is also a type that can be returned by another
acquire kfunc.
Then, doing the following sequence:
struct foo *f = bpf_get_foo(); // acquire kfunc
if (!f)
return 0;
bpf_put_bar(&f->b); // release kfunc
... would work with the current code, since the btf_struct_ids_match
takes reg->off into account for matching pointer type with release kfunc
argument type, but would obviously be incorrect, and most likely lead to
a kernel crash. A test has been included later to prevent regressions in
this area.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220304224645.3677453-5-memxor@gmail.com
Kumar Kartikeya Dwivedi [Fri, 4 Mar 2022 22:46:40 +0000 (04:16 +0530)]
bpf: Disallow negative offset in check_ptr_off_reg
check_ptr_off_reg only allows fixed offset to be set for PTR_TO_BTF_ID,
where reg->off < 0 doesn't make sense. This would shift the pointer
backwards, and fails later in btf_struct_ids_match or btf_struct_walk
due to out of bounds access (since offset is interpreted as unsigned).
Improve the verifier by rejecting this case by using a better error
message for BPF helpers and kfunc, by putting a check inside the
check_func_arg_reg_off function.
Also, update existing verifier selftests to work with new error string.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220304224645.3677453-4-memxor@gmail.com
Kumar Kartikeya Dwivedi [Fri, 4 Mar 2022 22:46:39 +0000 (04:16 +0530)]
bpf: Fix PTR_TO_BTF_ID var_off check
When kfunc support was added, check_ctx_reg was called for PTR_TO_CTX
register, but no offset checks were made for PTR_TO_BTF_ID. Only
reg->off was taken into account by btf_struct_ids_match, which protected
against type mismatch due to non-zero reg->off, but when reg->off was
zero, a user could set the variable offset of the register and allow it
to be passed to kfunc, leading to bad pointer being passed into the
kernel.
Fix this by reusing the extracted helper check_func_arg_reg_off from
previous commit, and make one call before checking all supported
register types. Since the list is maintained, any future changes will be
taken into account by updating check_func_arg_reg_off. This function
prevents non-zero var_off to be set for PTR_TO_BTF_ID, but still allows
a fixed non-zero reg->off, which is needed for type matching to work
correctly when using pointer arithmetic.
ARG_DONTCARE is passed as arg_type, since kfunc doesn't support
accepting a ARG_PTR_TO_ALLOC_MEM without relying on size of parameter
type from BTF (in case of pointer), or using a mem, len pair. The
forcing of offset check for ARG_PTR_TO_ALLOC_MEM is done because ringbuf
helpers obtain the size from the header located at the beginning of the
memory region, hence any changes to the original pointer shouldn't be
allowed. In case of kfunc, size is always known, either at verification
time, or using the length parameter, hence this forcing is not required.
Since this check will happen once already for PTR_TO_CTX, remove the
check_ptr_off_reg call inside its block.
Fixes:
e6ac2450d6de ("bpf: Support bpf program calling kernel function")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220304224645.3677453-3-memxor@gmail.com
Kumar Kartikeya Dwivedi [Fri, 4 Mar 2022 22:46:38 +0000 (04:16 +0530)]
bpf: Add check_func_arg_reg_off function
Lift the list of register types allowed for having fixed and variable
offsets when passed as helper function arguments into a common helper,
so that they can be reused for kfunc checks in later commits. Keeping a
common helper aids maintainability and allows us to follow the same
consistent rules across helpers and kfuncs. Also, convert check_func_arg
to use this function.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220304224645.3677453-2-memxor@gmail.com
Alexei Starovoitov [Sat, 5 Mar 2022 17:38:15 +0000 (09:38 -0800)]
Merge branch 'libbpf: support custom SEC() handlers'
Andrii Nakryiko says:
====================
Add ability for user applications and libraries to register custom BPF program
SEC() handlers. See patch #2 for examples where this is useful.
Patch #1 does some preliminary refactoring to allow exponsing program
init, preload, and attach callbacks as public API. It also establishes
a protocol to allow optional auto-attach behavior. This will also help the
case of sometimes auto-attachable uprobes.
v4->v5:
- API documentation improvements (Daniel);
v3->v4:
- init_fn -> prog_setup_fn, preload_fn -> prog_prepare_load_fn (Alexei);
v2->v3:
- moved callbacks and cookie into OPTS struct (Alan);
- added more test scenarios (Alan);
- address most of Alan's feedback, but kept API name;
v1->v2:
- resubmitting due to git send-email screw up.
Cc: Alan Maguire <alan.maguire@oracle.com>
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Andrii Nakryiko [Sat, 5 Mar 2022 01:01:29 +0000 (17:01 -0800)]
selftests/bpf: Add custom SEC() handling selftest
Add a selftest validating various aspects of libbpf's handling of custom
SEC() handlers. It also demonstrates how libraries can ensure very early
callbacks registration and unregistration using
__attribute__((constructor))/__attribute__((destructor)) functions.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/20220305010129.1549719-4-andrii@kernel.org
Andrii Nakryiko [Sat, 5 Mar 2022 01:01:28 +0000 (17:01 -0800)]
libbpf: Support custom SEC() handlers
Allow registering and unregistering custom handlers for BPF program.
This allows user applications and libraries to plug into libbpf's
declarative SEC() definition handling logic. This allows to offload
complex and intricate custom logic into external libraries, but still
provide a great user experience.
One such example is USDT handling library, which has a lot of code and
complexity which doesn't make sense to put into libbpf directly, but it
would be really great for users to be able to specify BPF programs with
something like SEC("usdt/<path-to-binary>:<usdt_provider>:<usdt_name>")
and have correct BPF program type set (BPF_PROGRAM_TYPE_KPROBE, as it is
uprobe) and even support BPF skeleton's auto-attach logic.
In some cases, it might be even good idea to override libbpf's default
handling, like for SEC("perf_event") programs. With custom library, it's
possible to extend logic to support specifying perf event specification
right there in SEC() definition without burdening libbpf with lots of
custom logic or extra library dependecies (e.g., libpfm4). With current
patch it's possible to override libbpf's SEC("perf_event") handling and
specify a completely custom ones.
Further, it's possible to specify a generic fallback handling for any
SEC() that doesn't match any other custom or standard libbpf handlers.
This allows to accommodate whatever legacy use cases there might be, if
necessary.
See doc comments for libbpf_register_prog_handler() and
libbpf_unregister_prog_handler() for detailed semantics.
This patch also bumps libbpf development version to v0.8 and adds new
APIs there.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/20220305010129.1549719-3-andrii@kernel.org
Andrii Nakryiko [Sat, 5 Mar 2022 01:01:27 +0000 (17:01 -0800)]
libbpf: Allow BPF program auto-attach handlers to bail out
Allow some BPF program types to support auto-attach only in subste of
cases. Currently, if some BPF program type specifies attach callback, it
is assumed that during skeleton attach operation all such programs
either successfully attach or entire skeleton attachment fails. If some
program doesn't support auto-attachment from skeleton, such BPF program
types shouldn't have attach callback specified.
This is limiting for cases when, depending on how full the SEC("")
definition is, there could either be enough details to support
auto-attach or there might not be and user has to use some specific API
to provide more details at runtime.
One specific example of such desired behavior might be SEC("uprobe"). If
it's specified as just uprobe auto-attach isn't possible. But if it's
SEC("uprobe/<some_binary>:<some_func>") then there are enough details to
support auto-attach. Note that there is a somewhat subtle difference
between auto-attach behavior of BPF skeleton and using "generic"
bpf_program__attach(prog) (which uses the same attach handlers under the
cover). Skeleton allow some programs within bpf_object to not have
auto-attach implemented and doesn't treat that as an error. Instead such
BPF programs are just skipped during skeleton's (optional) attach step.
bpf_program__attach(), on the other hand, is called when user *expects*
auto-attach to work, so if specified program doesn't implement or
doesn't support auto-attach functionality, that will be treated as an
error.
Another improvement to the way libbpf is handling SEC()s would be to not
require providing dummy kernel function name for kprobe. Currently,
SEC("kprobe/whatever") is necessary even if actual kernel function is
determined by user at runtime and bpf_program__attach_kprobe() is used
to specify it. With changes in this patch, it's possible to support both
SEC("kprobe") and SEC("kprobe/<actual_kernel_function"), while only in
the latter case auto-attach will be performed. In the former one, such
kprobe will be skipped during skeleton attach operation.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/20220305010129.1549719-2-andrii@kernel.org
David S. Miller [Sat, 5 Mar 2022 11:16:56 +0000 (11:16 +0000)]
Merge branch 'bnxt_en-updates'
Michael Chan says:
====================
bnxt_en: Updates.
This patch series contains mainly NVRAM related features. More
NVRAM error checking and logging are added when installing firmware
packages. A new devlink hw health report is now added to report
and diagnose NVRAM issues. Other miscellaneous patches include
reporting correctly cards that don't support link pause, adding
an internal unknown link state, and avoiding unnecessary link
toggle during firmware reset.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vikas Gupta [Sat, 5 Mar 2022 08:54:42 +0000 (03:54 -0500)]
bnxt_en: add an nvm test for hw diagnose
Add an NVM test function for devlink hw reporter.
In this function an NVM VPD area is read followed by
a write. Test result is cached and if it is successful then
the next test can be conducted only after HW_RETEST_MIN_TIME to
avoid frequent writes to the NVM.
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kalesh AP [Sat, 5 Mar 2022 08:54:41 +0000 (03:54 -0500)]
bnxt_en: implement hw health reporter
This reporter will report NVM errors which are non-fatal.
When we receive these NVM error events, we'll report it
through this new hw health reporter.
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Edwin Peer [Sat, 5 Mar 2022 08:54:40 +0000 (03:54 -0500)]
bnxt_en: Do not destroy health reporters during reset
Health reporter state should be maintained over resets. Previously
reporters were destroyed if the device capabilities changed, but
since none of the reporters depend on capabilities anymore, this
logic should be removed.
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Sat, 5 Mar 2022 08:54:39 +0000 (03:54 -0500)]
bnxt_en: Eliminate unintended link toggle during FW reset
If the flow control settings have been changed, a subsequent FW reset
may cause the ethernet link to toggle unnecessarily. This link toggle
will increase the down time by a few seconds.
The problem is caused by bnxt_update_phy_setting() detecting a false
mismatch in the flow control settings between the stored software
settings and the current FW settings after the FW reset. This mismatch
is caused by the AUTONEG bit added to link_info->req_flow_ctrl in an
inconsistent way in bnxt_set_pauseparam() in autoneg mode. The AUTONEG
bit should not be added to link_info->req_flow_ctrl.
Reviewed-by: Colin Winegarden <colin.winegarden@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Sat, 5 Mar 2022 08:54:38 +0000 (03:54 -0500)]
bnxt_en: Properly report no pause support on some cards
Some cards are configured to never support link pause or PFC. Discover
these cards and properly report no pause support to ethtool. Disable
PFC settings from DCBNL if PFC is unsupported.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Edwin Peer [Sat, 5 Mar 2022 08:54:37 +0000 (03:54 -0500)]
bnxt_en: introduce initial link state of unknown
This will force link state to always be logged for initial NIC open.
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kalesh AP [Sat, 5 Mar 2022 08:54:36 +0000 (03:54 -0500)]
bnxt_en: parse result field when NVRAM package install fails
Instead of always returning -ENOPKG, decode the firmware error
code further when the HWRM_NVM_INSTALL_UPDATE firmware call fails.
Return a more suitable error code to userspace and log an error
in dmesg.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kalesh AP [Sat, 5 Mar 2022 08:54:35 +0000 (03:54 -0500)]
bnxt_en: add more error checks to HWRM_NVM_INSTALL_UPDATE
FW returns error code "NVM_INSTALL_UPDATE_CMD_ERR_CODE_ANTI_ROLLBACK"
in the response to indicate that HWRM_NVM_INSTALL_UPDATE command has
failed due to Anti-rollback feature. Parse the error and return an
appropriate error code to the user.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kalesh AP [Sat, 5 Mar 2022 08:54:34 +0000 (03:54 -0500)]
bnxt_en: refactor error handling of HWRM_NVM_INSTALL_UPDATE
This is in anticipation of handling more "cmd_err" from FW in the next
patch.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 5 Mar 2022 11:12:09 +0000 (11:12 +0000)]
Merge branch 'axienet-napi-gro-support'
Robert Hancock says:
====================
NAPI/GRO support for axienet driver
Add support for NAPI and GRO receive in the Xilinx AXI Ethernet driver,
and some other related cleanups.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Robert Hancock [Sat, 5 Mar 2022 02:24:43 +0000 (20:24 -0600)]
net: axienet: add coalesce timer ethtool configuration
Add the ability to configure the RX/TX coalesce timer with ethtool.
Change default setting to scale with the clock rate rather than being a
fixed number of clock cycles.
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Robert Hancock [Sat, 5 Mar 2022 02:24:42 +0000 (20:24 -0600)]
net: axienet: reduce default RX interrupt threshold to 1
Now that NAPI has been implemented, the hardware interrupt mitigation
mechanism is not needed to avoid excessive interrupt load in most cases.
Reduce the default RX interrupt threshold to 1 to reduce introduced
latency. This can be increased with ethtool if desired if some applications
still want to reduce interrupts.
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Robert Hancock [Sat, 5 Mar 2022 02:24:41 +0000 (20:24 -0600)]
net: axienet: implement NAPI and GRO receive
Implement NAPI and GRO receive. In addition to better performance, this
also avoids handling RX packets in hard IRQ context, which reduces the
IRQ latency impact to other devices.
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Robert Hancock [Sat, 5 Mar 2022 02:24:40 +0000 (20:24 -0600)]
net: axienet: don't set IRQ timer when IRQ delay not used
When the RX or TX coalesce count is set to 1, there's no point in
setting the delay timer value since an interrupt will already be raised
on every packet, and the delay interrupt just causes extra pointless
interrupts.
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Robert Hancock [Sat, 5 Mar 2022 02:24:39 +0000 (20:24 -0600)]
net: axienet: Clean up DMA start/stop and error handling
Simplify the DMA error handling process, and remove some duplicated code
between the DMA error handling and the stop function.
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Robert Hancock [Sat, 5 Mar 2022 02:24:38 +0000 (20:24 -0600)]
net: axienet: Clean up device used for DMA calls
Instead of using lp->ndev.parent to find the correct device to use for
DMA API calls, just use the dev attribute in the device structure.
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Robert Hancock [Sat, 5 Mar 2022 02:24:37 +0000 (20:24 -0600)]
net: axienet: fix RX ring refill allocation failure handling
If a memory allocation error occurred during an attempt to refill a slot
in the RX ring after the packet was received, the hardware tail pointer
would still have been updated to point to or past the slot which remained
marked as previously completed. This would likely result in the DMA engine
raising an error when it eventually tried to use that slot again.
If a slot cannot be refilled, then just stop processing and do not move
the tail pointer past it. On the next attempt, we should skip receiving
the packet from the empty slot and just try to refill it again.
This failure mode has not actually been observed, but was found as part
of other driver updates.
Fixes:
8a3b7a252dca ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 5 Mar 2022 11:04:25 +0000 (11:04 +0000)]
Merge branch 'dsa-realtek-add-rtl8_4t-tags'
Luiz Angelo Daros de Luca says:
====================
net: dsa: realtek: add rtl8_4t tag
This patch series adds support for rtl8_4t tag. It is a variant of
rtl8_4 tag, with identical values but placed at the end of the packet
(before CRC).
It forces checksum in software before adding the tag as those extra
bytes at the end of the packet would be summed together with the rest of
the payload. When the switch removes the tag before sending the packet
to the network, that checksum will not match.
It might be useful to diagnose or avoid checksum offload issues. With an
ethertype tag like rtl8_4, the cpu port ethernet driver must work with
cksum_start and chksum_offset to correctly calculate checksums. If not,
the checksum field will be broken (it will contain the fake ip header
sum). In those cases, using 'rtl8_4t' might be an alternative way to
avoid checksum offload, either using runtime or device-tree property.
Regards,
Luiz
v4-v5)
- tags in alphabetical order in dsa_port.yaml
- remove ret var from rtl8365mb_change_tag_protocol
- Comment typos fixes
v3-v4)
- added rtl8_4 and rtl8_4t to dsa_port.yaml
- removed generic considerations about checksum problems with DSA tags.
They belong to Documentation/networking/dsa/dsa.rst
v2-v3)
- updated tag documentation (file header)
- do not remove position and format from rtl8365mb_cpu
- reinstate cpu to rtl8365mb
- moved rtl8365mb_change_tag_protocol after rtl8365mb_cpu_config
- do not modify rtl8365mb_cpu_config() logic
- remove cpu arg from rtl8365mb_cpu_config(); get it from priv
- dropped tag_protocol from rtl8365mb. It is now derived from
cpu->position.
- init cpu struct before dsa_register as default tag must be already
defined before dsa_register()
- fix formatting issues
v1-v2)
- remove mention to tail tagger, use trailing tagger.
- use void* instead of char* for pointing to tag beginning
- use memcpy to avoid problems with unaligned tags
- calculate checksum if it still pending
- keep in-use tag protocol in memory instead of reading from switch
register
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Luiz Angelo Daros de Luca [Thu, 3 Mar 2022 01:52:35 +0000 (22:52 -0300)]
net: dsa: realtek: rtl8365mb: add support for rtl8_4t
The trailing tag is also supported by this family. The default is still
rtl8_4 but now the switch supports changing the tag to rtl8_4t.
Reintroduce the dropped cpu in struct rtl8365mb (removed by
6147631).
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Luiz Angelo Daros de Luca [Thu, 3 Mar 2022 01:52:34 +0000 (22:52 -0300)]
net: dsa: tag_rtl8_4: add rtl8_4t trailing variant
Realtek switches supports the same tag both before ethertype or between
payload and the CRC.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Luiz Angelo Daros de Luca [Thu, 3 Mar 2022 01:52:33 +0000 (22:52 -0300)]
dt-bindings: net: dsa: add rtl8_4 and rtl8_4t tag formats
Realtek rtl8365mb DSA driver can use these two tag formats.
Cc: devicetree@vger.kernel.org
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Sat, 5 Mar 2022 05:54:33 +0000 (21:54 -0800)]
Merge branch 'mptcp-selftest-refinements-and-a-new-test'
Mat Martineau says:
====================
mptcp: Selftest refinements and a new test
Patches 1 and 11 improve the printed output of the mptcp_join.sh
selftest.
Patches 2-8 add a test for the MP_FASTCLOSE option, including
prerequisite changes like additional MPTCP MIBs.
Patches 9-10 add some groundwork for upcoming tests.
====================
Link: https://lore.kernel.org/r/20220304193636.219315-1-mathew.j.martineau@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Geliang Tang [Fri, 4 Mar 2022 19:36:36 +0000 (11:36 -0800)]
selftests: mptcp: update output info of chk_rm_nr
This patch updated the output info of chk_rm_nr. Renamed 'sf' to 'rmsf',
which means 'remove subflow'. Added the display of whether the inverted
namespaces has been used to check the mib counters.
The new output looks like this:
002 remove multiple subflows syn[ ok ] - synack[ ok ] - ack[ ok ]
rm [ ok ] - rmsf [ ok ]
003 remove single address syn[ ok ] - synack[ ok ] - ack[ ok ]
add[ ok ] - echo [ ok ]
rm [ ok ] - rmsf [ ok ] invert
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Geliang Tang [Fri, 4 Mar 2022 19:36:35 +0000 (11:36 -0800)]
selftests: mptcp: add more arguments for chk_join_nr
This patch added five more arguments for chk_join_nr(). The default
values of them are all zero.
The first two, csum_ns1 and csum_ns1, are passed to chk_csum_nr(), to
check the mib counters of the checksum errors in ns1 and ns2. A '+'
can be added into this two arguments to represent that multiple
checksum errors are allowed when doing this check. For example,
chk_csum_nr "" +2 +2
indicates that two or more checksum errors are allowed in both ns1 and
ns2.
The remaining two, fail_nr and rst_nr, are passed to chk_fail_nr() and
chk_rst_nr() respectively, to check the sending and receiving mib
counters of MP_FAIL and MP_RST.
Also did some cleanups in chk_fail_nr(), renamed two local variables
and updated the output message.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Geliang Tang [Fri, 4 Mar 2022 19:36:34 +0000 (11:36 -0800)]
selftests: mptcp: add invert check in check_transfer
This patch added the invert bytes check for the output data in
check_transfer().
Instead of the file mismatch error:
[ FAIL ] file received by server does not match (in, out):
-rw------- 1 root root
45643832 Jan 16 15:04 /tmp/tmp.9xpM6Paivv
Trailing bytes are:
MPTCP_TEST_FILE_END_MARKER
-rw------- 1 root root
45643832 Jan 16 15:04 /tmp/tmp.wnz1Yp4u7Z
Trailing bytes are:
MPTCP_TEST_FILE_END_MARKER
Print out the inverted bytes like this:
file received by server has inverted byte at
7454789
file received by server has inverted byte at
7454790
file received by server has inverted byte at
7454791
file received by server has inverted byte at
7454792
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Geliang Tang [Fri, 4 Mar 2022 19:36:33 +0000 (11:36 -0800)]
selftests: mptcp: add fastclose testcase
This patch added the self test for MP_FASTCLOSE. Reused the argument
addr_nr_ns2 of do_transfer() to pass the extra arguments '-I 2' to
mptcp_connect commands. Then mptcp_connect disconnected the
connections to trigger the MP_FASTCLOSE sending and receiving. Used
chk_fclose_nr to check the MP_FASTCLOSE mibs and used chk_rst_nr to
check the MP_RST mibs. This test used the test_linkfail value to make
1024KB test files.
The output looks like this:
Created /tmp/tmp.XB8sfv1hJ0 (size 1024 KB) containing data sent by client
Created /tmp/tmp.RtTDbzqrXI (size 1024 KB) containing data sent by server
001 fastclose test syn[ ok ] - synack[ ok ] - ack[ ok ]
ctx[ ok ] - fclzrx[ ok ]
rtx[ ok ] - rstrx [ ok ] invert
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Geliang Tang [Fri, 4 Mar 2022 19:36:32 +0000 (11:36 -0800)]
selftests: mptcp: reuse linkfail to make given size files
This patch reused the test_linkfail values above 2 to make test files with
the given sizes (KB) for both the client side and the server side. It's
useful for the test cases using different file sizes.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Geliang Tang [Fri, 4 Mar 2022 19:36:31 +0000 (11:36 -0800)]
selftests: mptcp: add extra_args in do_transfer
Instead of using a global variable mptcp_connect, this patch added
a new local variable extra_args in do_transfer() to store the extra
arguments passing to the mptcp_connect commands.
This patch also renamed the speed level 'least' to 'speed_*'. This
more flexible way can avoid the need to add new speed levels in the
future.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Geliang Tang [Fri, 4 Mar 2022 19:36:30 +0000 (11:36 -0800)]
selftests: mptcp: add the MP_RST mibs check
This patch added a new function chk_rst_nr() to check the numbers
of the MP_RST sending and receiving mibs.
Showed in the output whether the inverted namespaces check order is used.
Since if we pass -Cz to mptcp_join.sh, the MP_RST information is showed
twice.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Geliang Tang [Fri, 4 Mar 2022 19:36:29 +0000 (11:36 -0800)]
mptcp: add the mibs for MP_RST
This patch added two more mibs for MP_RST, MPTCP_MIB_MPRSTTX for
the MP_RST sending and MPTCP_MIB_MPRSTRX for the MP_RST receiving.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Geliang Tang [Fri, 4 Mar 2022 19:36:28 +0000 (11:36 -0800)]
selftests: mptcp: add the MP_FASTCLOSE mibs check
This patch added a new function chk_fclose_nr() to check the numbers
of the MP_FASTCLOSE sending and receiving mibs.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Geliang Tang [Fri, 4 Mar 2022 19:36:27 +0000 (11:36 -0800)]
mptcp: add the mibs for MP_FASTCLOSE
This patch added two more mibs for MP_FASTCLOSE, MPTCP_MIB_MPFASTCLOSETX
for the MP_FASTCLOSE sending and MPTCP_MIB_MPFASTCLOSERX for receiving.
Also added a debug log for MP_FASTCLOSE receiving, printed out the recv_key
of MP_FASTCLOSE in mptcp_parse_option to show that MP_RST is received.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Geliang Tang [Fri, 4 Mar 2022 19:36:26 +0000 (11:36 -0800)]
selftests: mptcp: adjust output alignment for more tests
The number of self tests in mptcp_join.sh will soon be more than 100, the
output alignment is no longer OK. This patch adjusted it.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Meng Tang [Thu, 3 Mar 2022 10:08:15 +0000 (18:08 +0800)]
bcm63xx_enet: Use platform_get_irq() to get the interrupt
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on
static allocation of IRQ resources in DT core code, this
causes an issue when using hierarchical interrupt domains
using "interrupts" property in the node as this bypassed
the hierarchical setup and messed up the irq chaining.
In preparation for removal of static setup of IRQ resource
from DT core code use platform_get_irq().
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Link: https://lore.kernel.org/r/20220303100815.25605-1-tangmeng@uniontech.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jonathan Lemon [Fri, 4 Mar 2022 05:46:15 +0000 (21:46 -0800)]
ptp: ocp: Add serial port information to the debug summary
On the debug summary page, show the /dev/ttyS<port> mapping.
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Link: https://lore.kernel.org/r/20220304054615.1737-1-jonathan.lemon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Horatiu Vultur [Fri, 4 Mar 2022 14:09:18 +0000 (15:09 +0100)]
net: sparx5: Fix initialization of variables on stack
The variables 'res' inside the functions sparx5_ptp_get_1ppm and
sparx5_ptp_get_nominal_value was not initialized. So in case of the default
case of the switch after, it would return an uninitialized variable.
This makes also the clang builds to failed.
Fixes:
0933bd04047c3b ("net: sparx5: Add support for ptp clocks")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20220304140918.3356873-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Sat, 5 Mar 2022 03:42:04 +0000 (19:42 -0800)]
Merge tag 'for-net-next-2022-03-04' of git://git./linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
- Add new PID/VID (0x13d3/0x3567) for MT7921
- Add new PID/VID (0x2550/0x8761) for Realtek 8761BU
- Add support for LG LGSBWAC02 (MT7663BUN)
- Add support for BCM43430A0 and BCM43430A1
- Add support for Intel Madison Peak (MsP2)
* tag 'for-net-next-2022-03-04' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (21 commits)
Bluetooth: btusb: Add another Realtek 8761BU
Bluetooth: hci_bcm: add BCM43430A0 & BCM43430A1
Bluetooth: use memset avoid memory leaks
Bluetooth: btmtksdio: Fix kernel oops when sdio suspend.
Bluetooth: btusb: Add a new PID/VID 13d3/3567 for MT7921
Bluetooth: move adv_instance_cnt read within the device lock
Bluetooth: hci_event: Add missing locking on hdev in hci_le_ext_adv_term_evt
Bluetooth: btusb: Make use of of BIT macro to declare flags
Bluetooth: Fix not checking for valid hdev on bt_dev_{info,warn,err,dbg}
Bluetooth: mediatek: fix the conflict between mtk and msft vendor event
Bluetooth: mt7921s: support bluetooth reset mechanism
Bluetooth: make array bt_uuid_any static const
Bluetooth: 6lowpan: No need to clear memory twice
Bluetooth: btusb: Improve stability for QCA devices
Bluetooth: btusb: add support for LG LGSBWAC02 (MT7663BUN)
Bluetooth: btusb: Add support for Intel Madison Peak (MsP2) device
Bluetooth: Improve skb handling in mgmt_device_connected()
Bluetooth: Fix skb allocation in mgmt_remote_name() & mgmt_device_connected()
Bluetooth: mgmt: Remove unneeded variable
Bluetooth: hci_sync: fix undefined return of hci_disconnect_all_sync()
...
====================
Link: https://lore.kernel.org/r/20220304193919.649815-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Sat, 5 Mar 2022 03:28:17 +0000 (19:28 -0800)]
Merge https://git./linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-03-04
We've added 32 non-merge commits during the last 14 day(s) which contain
a total of 59 files changed, 1038 insertions(+), 473 deletions(-).
The main changes are:
1) Optimize BPF stackmap's build_id retrieval by caching last valid build_id,
as consecutive stack frames are likely to be in the same VMA and therefore
have the same build id, from Hao Luo.
2) Several improvements to arm64 BPF JIT, that is, support for JITing
the atomic[64]_fetch_add, atomic[64]_[fetch_]{and,or,xor} and lastly
atomic[64]_{xchg|cmpxchg}. Also fix the BTF line info dump for JITed
programs, from Hou Tao.
3) Optimize generic BPF map batch deletion by only enforcing synchronize_rcu()
barrier once upon return to user space, from Eric Dumazet.
4) For kernel build parse DWARF and generate BTF through pahole with enabled
multithreading, from Kui-Feng Lee.
5) BPF verifier usability improvements by making log info more concise and
replacing inv with scalar type name, from Mykola Lysenko.
6) Two follow-up fixes for BPF prog JIT pack allocator, from Song Liu.
7) Add a new Kconfig to allow for loading kernel modules with non-matching
BTF type info; their BTF info is then removed on load, from Connor O'Brien.
8) Remove reallocarray() usage from bpftool and switch to libbpf_reallocarray()
in order to fix compilation errors for older glibc, from Mauricio Vásquez.
9) Fix libbpf to error on conflicting name in BTF when type declaration
appears before the definition, from Xu Kuohai.
10) Fix issue in BPF preload for in-kernel light skeleton where loaded BPF
program fds prevent init process from setting up fd 0-2, from Yucong Sun.
11) Fix libbpf reuse of pinned perf RB map when max_entries is auto-determined
by libbpf, from Stijn Tintel.
12) Several cleanups for libbpf and a fix to enforce perf RB map #pages to be
non-zero, from Yuntao Wang.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (32 commits)
bpf: Small BPF verifier log improvements
libbpf: Add a check to ensure that page_cnt is non-zero
bpf, x86: Set header->size properly before freeing it
x86: Disable HAVE_ARCH_HUGE_VMALLOC on 32-bit x86
bpf, test_run: Fix overflow in XDP frags bpf_test_finish
selftests/bpf: Update btf_dump case for conflicting names
libbpf: Skip forward declaration when counting duplicated type names
bpf: Add some description about BPF_JIT_ALWAYS_ON in Kconfig
bpf, docs: Add a missing colon in verifier.rst
bpf: Cache the last valid build_id
libbpf: Fix BPF_MAP_TYPE_PERF_EVENT_ARRAY auto-pinning
bpf, selftests: Use raw_tp program for atomic test
bpf, arm64: Support more atomic operations
bpftool: Remove redundant slashes
bpf: Add config to allow loading modules with BTF mismatches
bpf, arm64: Feed byte-offset into bpf line info
bpf, arm64: Call build_prologue() first in first JIT pass
bpf: Fix issue with bpf preload module taking over stdout/stdin of kernel.
bpftool: Bpf skeletons assert type sizes
bpf: Cleanup comments
...
====================
Link: https://lore.kernel.org/r/20220304164313.31675-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Helmut Grohne [Sat, 26 Feb 2022 15:22:56 +0000 (16:22 +0100)]
Bluetooth: btusb: Add another Realtek 8761BU
This device is sometimes wrapped with a label "EDUP".
T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=03 Dev#=107 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=2550 ProdID=8761 Rev= 2.00
S: Manufacturer=Realtek
S: Product=Bluetooth Radio
S: SerialNumber=
00E04C239987
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Signed-off-by: Helmut Grohne <helmut@subdivi.de>
Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1955351
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Luca Weiss [Fri, 25 Feb 2022 20:41:38 +0000 (21:41 +0100)]
Bluetooth: hci_bcm: add BCM43430A0 & BCM43430A1
Add the compatible for BCM43430A0 bluetooth used in lg-lenok and
BCM43430A1 used in asus-sparrow.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Minghao Chi (CGEL ZTE) [Fri, 25 Feb 2022 07:41:52 +0000 (07:41 +0000)]
Bluetooth: use memset avoid memory leaks
Use memset to initialize structs to prevent memory leaks
in l2cap_ecred_connect
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Yake Yang [Tue, 22 Feb 2022 23:56:00 +0000 (07:56 +0800)]
Bluetooth: btmtksdio: Fix kernel oops when sdio suspend.
Do not kfree the skb when the skb failed to send with __hci_cmd_sync
2435.241210] Call trace:
[ 2435.241224] kfree_skb+0x20/0x140
[ 2435.241240] btmtksdio_sdio_wakeup+0x8c/0xcc
[ 2435.241360] hci_suspend_notifier+0x108/0x184
[ 2435.241377] notifier_call_chain_robust+0x58/0xd8
[ 2435.241390] blocking_notifier_call_chain_robust+0x54/0x84
[ 2435.241402] pm_notifier_call_chain_robust+0x2c/0x4c
[ 2435.241414] suspend_prepare+0x40/0x238
[ 2435.241425] enter_state+0xec/0x3a8
[ 2435.241436] pm_suspend+0x60/0xcc
[ 2435.241446] state_store+0xb8/0x114
[ 2435.241460] kobj_attr_store+0x18/0x2c
[ 2435.241473] sysfs_kf_write+0x44/0x58
[ 2435.241486] kernfs_fop_write_iter+0xf4/0x190
[ 2435.241500] vfs_write+0x2b0/0x2e4
[ 2435.241511] ksys_write+0x80/0xec
[ 2435.241523] __arm64_sys_write+0x24/0x30
[ 2435.241538] el0_svc_common+0xf0/0x1d8
[ 2435.241550] do_el0_svc_compat+0x28/0x54
[ 2435.241564] el0_svc_compat+0x10/0x1c
[ 2435.241574] el0_sync_compat_handler+0xa8/0xcc
[ 2435.241586] el0_sync_compat+0x188/0x1c0
[ 2435.241606] Code:
a9014ff4 910003fd b40002c0 aa0003f3 (
b84d4c08)
[ 2435.241619] ---[ end trace
d496539b850baf14 ]---
Fixes:
ce64b3e94919 ("Bluetooth: mt7921s: Support wake on bluetooth")
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Yake Yang <yake.yang@mediatek.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Yake Yang [Tue, 22 Feb 2022 23:55:59 +0000 (07:55 +0800)]
Bluetooth: btusb: Add a new PID/VID 13d3/3567 for MT7921
Add VID 13D3 & PID 3567 for MediaTek MT7921 USB Bluetooth chip.
The information in /sys/kernel/debug/usb/devices about the Bluetooth
device is listed as the below.
T: Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3567 Rev= 1.00
S: Manufacturer=MediaTek Inc.
S: Product=Wireless_Device
S: SerialNumber=
000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us
I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Yake Yang <yake.yang@mediatek.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Niels Dossche [Sat, 12 Feb 2022 23:14:30 +0000 (00:14 +0100)]
Bluetooth: move adv_instance_cnt read within the device lock
The field adv_instance_cnt is always accessed within a device lock,
except in the function add_advertising. A concurrent remove of an
advertisement with adding another one could result in the if check
"if a new instance was actually added" to not trigger, resulting
in not triggering the "advertising added event".
Signed-off-by: Niels Dossche <niels.dossche@ugent.be>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Niels Dossche [Wed, 9 Feb 2022 14:08:51 +0000 (15:08 +0100)]
Bluetooth: hci_event: Add missing locking on hdev in hci_le_ext_adv_term_evt
Both hci_find_adv_instance and hci_remove_adv_instance have a comment
above their function definition saying that these two functions require
the caller to hold the hdev->lock lock. However, hci_le_ext_adv_term_evt
does not acquire that lock and neither does its caller hci_le_meta_evt
(hci_le_meta_evt calls hci_le_ext_adv_term_evt via an indirect function
call because of the lookup in hci_le_ev_table).
The other event handlers all acquire and release the hdev->lock and they
follow the rule that hci_find_adv_instance and hci_remove_adv_instance
must be called while holding the hdev->lock lock.
The solution is to make sure hci_le_ext_adv_term_evt also acquires and
releases the hdev->lock lock. The check on ev->status which logs a
warning and does an early return is not covered by the lock because
other functions also access ev->status without holding the lock.
Signed-off-by: Niels Dossche <niels.dossche@ugent.be>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Luiz Augusto von Dentz [Thu, 3 Mar 2022 22:17:07 +0000 (14:17 -0800)]
Bluetooth: btusb: Make use of of BIT macro to declare flags
This makes use of BIT macro when declaring BTUSB flags which makes it
understand how many bits are in use and many are left.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Luiz Augusto von Dentz [Thu, 3 Mar 2022 21:11:57 +0000 (13:11 -0800)]
Bluetooth: Fix not checking for valid hdev on bt_dev_{info,warn,err,dbg}
This fixes attemting to print hdev->name directly which causes them to
print an error:
kernel: read_version:367: (efault): sock
000000006a3008f2
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Sean Wang [Tue, 8 Feb 2022 18:17:41 +0000 (02:17 +0800)]
Bluetooth: mediatek: fix the conflict between mtk and msft vendor event
There is a conflict between MediaTek wmt event and msft vendor extension
logic in the core layer since
145373cb1b1f ("Bluetooth: Add framework for
Microsoft vendor extension") was introduced because we changed the type of
mediatek wmt event to the type of msft vendor event in the driver.
But the purpose we reported mediatek event to the core layer is for the
diagnostic purpose with that we are able to see the full packet trace via
monitoring socket with btmon. Thus, it is harmless we keep the original
type of mediatek vendor event here to avoid breaking the msft extension
function especially they can be supported by Mediatek chipset like MT7921
, MT7922 devices and future devices.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Chih-Ying Chiang [Tue, 8 Feb 2022 18:17:40 +0000 (02:17 +0800)]
Bluetooth: mt7921s: support bluetooth reset mechanism
Implement .cmd_timeout to reset the MT7921s device via a dedicated GPIO
pin when the firmware hang or the command has no response.
Co-developed-by: Mark Chen <mark-yw.chen@mediatek.com>
Signed-off-by: Mark Chen <mark-yw.chen@mediatek.com>
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Chih-Ying Chiang <chih-yin.chiang@mediatek.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Colin Ian King [Mon, 14 Feb 2022 21:51:30 +0000 (21:51 +0000)]
Bluetooth: make array bt_uuid_any static const
Don't populate the read-only array bt_uuid_any on the stack but
instead make it static const. Also makes the object code a little
smaller.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Christophe JAILLET [Sun, 13 Feb 2022 21:30:47 +0000 (22:30 +0100)]
Bluetooth: 6lowpan: No need to clear memory twice
'peer_addr' is a structure embedded in 'struct lowpan_peer'. So there is no
need to explicitly call memset(0) on it. It is already zeroed by kzalloc()
when 'peer' is allocated.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Zijun Hu [Mon, 14 Feb 2022 10:43:39 +0000 (18:43 +0800)]
Bluetooth: btusb: Improve stability for QCA devices
WCN6855 2.1 will reset to apply firmware downloaded, so wait
a moment for reset done then go ahead to improve stability.
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Piotr Dymacz [Fri, 11 Feb 2022 09:31:03 +0000 (10:31 +0100)]
Bluetooth: btusb: add support for LG LGSBWAC02 (MT7663BUN)
The LG LGSBWAC02 (FCC ID: BEJLGSBWAC02) is a combo Wi-Fi/BT module which
can be found in several different LG TV models. This module is based on
already supported MediaTek MT7663U series.
Device from /sys/kernel/debug/usb/devices:
T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=02 Dev#= 4 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=043e ProdID=310c Rev= 1.00
S: Manufacturer=MediaTek Inc.
S: Product=Wireless_Device
S: SerialNumber=
000000000
C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=100mA
A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 8 Cls=ff(vend.) Sub=ff Prot=ff Driver=mt7663u
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Kiran K [Mon, 31 Jan 2022 16:32:35 +0000 (22:02 +0530)]
Bluetooth: btusb: Add support for Intel Madison Peak (MsP2) device
$ lsusb
Bus 003 Device 003: ID 8087:0035 Intel Corp.
$ cat /sys/kernel/debug/usb/devices
T: Bus=03 Lev=01 Prnt=01 Port=09 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=8087 ProdID=0035 Rev= 0.00
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Radoslaw Biernacki [Tue, 1 Feb 2022 20:10:33 +0000 (20:10 +0000)]
Bluetooth: Improve skb handling in mgmt_device_connected()
This patch introduce eir_skb_put_data() that can be used to simplify
operations on eir in goal of eliminating the necessity of intermediary
buffers.
eir_skb_put_data() is in pair to what eir_append_data() does with help of
eir_len, but without awkwardness when passing return value to skb_put() (as
it returns updated offset not size).
Signed-off-by: Radoslaw Biernacki <rad@semihalf.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
projects / linux-2.6-microblaze.git / log