linux-2.6-microblaze.git
11 years agontfs: drop vmtruncate
Marco Stornelli [Sat, 15 Dec 2012 10:58:36 +0000 (11:58 +0100)]
ntfs: drop vmtruncate

Removed vmtruncate

Signed-off-by: Marco Stornelli <marco.stornelli@gmail.com>
Reviewed-by: Anton Altaparmakov <anton@tuxera.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agonilfs2: drop vmtruncate
Marco Stornelli [Sat, 15 Dec 2012 10:57:37 +0000 (11:57 +0100)]
nilfs2: drop vmtruncate

Removed vmtruncate

Signed-off-by: Marco Stornelli <marco.stornelli@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agoncpfs: drop vmtruncate
Marco Stornelli [Sat, 15 Dec 2012 10:57:03 +0000 (11:57 +0100)]
ncpfs: drop vmtruncate

Removed vmtruncate

Signed-off-by: Marco Stornelli <marco.stornelli@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agominix: drop vmtruncate
Marco Stornelli [Sat, 15 Dec 2012 10:56:25 +0000 (11:56 +0100)]
minix: drop vmtruncate

Removed vmtruncate

Signed-off-by: Marco Stornelli <marco.stornelli@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agologfs: drop vmtruncate
Marco Stornelli [Sat, 15 Dec 2012 10:55:42 +0000 (11:55 +0100)]
logfs: drop vmtruncate

Removed vmtruncate

Signed-off-by: Marco Stornelli <marco.stornelli@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agohfsplus: drop vmtruncate
Marco Stornelli [Sat, 15 Dec 2012 10:55:07 +0000 (11:55 +0100)]
hfsplus: drop vmtruncate

Removed vmtruncate

Signed-off-by: Marco Stornelli <marco.stornelli@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agojfs: drop vmtruncate
Marco Stornelli [Sat, 15 Dec 2012 10:54:25 +0000 (11:54 +0100)]
jfs: drop vmtruncate

Removed vmtruncate

Signed-off-by: Marco Stornelli <marco.stornelli@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agohpfs: drop vmtruncate
Marco Stornelli [Sat, 15 Dec 2012 10:53:50 +0000 (11:53 +0100)]
hpfs: drop vmtruncate

Removed vmtruncate

Signed-off-by: Marco Stornelli <marco.stornelli@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agohfs: drop vmtruncate
Marco Stornelli [Sat, 15 Dec 2012 10:53:15 +0000 (11:53 +0100)]
hfs: drop vmtruncate

Removed vmtruncate

Signed-off-by: Marco Stornelli <marco.stornelli@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agobfs: drop vmtruncate
Marco Stornelli [Sat, 15 Dec 2012 10:52:33 +0000 (11:52 +0100)]
bfs: drop vmtruncate

Removed vmtruncate

Signed-off-by: Marco Stornelli <marco.stornelli@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agoaffs: drop vmtruncate
Marco Stornelli [Sat, 15 Dec 2012 10:51:53 +0000 (11:51 +0100)]
affs: drop vmtruncate

Removed vmtruncate

Signed-off-by: Marco Stornelli <marco.stornelli@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agoadfs: drop vmtruncate
Marco Stornelli [Sat, 15 Dec 2012 10:51:11 +0000 (11:51 +0100)]
adfs: drop vmtruncate

Removed vmtruncate

Signed-off-by: Marco Stornelli <marco.stornelli@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agoocfs2: drop vmtruncate
Marco Stornelli [Sat, 15 Dec 2012 10:50:20 +0000 (11:50 +0100)]
ocfs2: drop vmtruncate

Removed vmtruncate

Signed-off-by: Marco Stornelli <marco.stornelli@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agoomfs: drop vmtruncate
Marco Stornelli [Sat, 15 Dec 2012 10:49:42 +0000 (11:49 +0100)]
omfs: drop vmtruncate

Removed vmtruncate

Signed-off-by: Marco Stornelli <marco.stornelli@gmail.com>
Acked-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agoprocfs: drop vmtruncate
Marco Stornelli [Sat, 15 Dec 2012 10:48:48 +0000 (11:48 +0100)]
procfs: drop vmtruncate

Removed vmtruncate

Signed-off-by: Marco Stornelli <marco.stornelli@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agoreiserfs: drop vmtruncate
Marco Stornelli [Sat, 15 Dec 2012 10:47:31 +0000 (11:47 +0100)]
reiserfs: drop vmtruncate

Removed vmtruncate

Signed-off-by: Marco Stornelli <marco.stornelli@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agosysv: drop vmtruncate
Marco Stornelli [Sat, 15 Dec 2012 10:45:58 +0000 (11:45 +0100)]
sysv: drop vmtruncate

Removed vmtruncate

Signed-off-by: Marco Stornelli <marco.stornelli@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agoufs: drop vmtruncate
Marco Stornelli [Sat, 15 Dec 2012 10:45:14 +0000 (11:45 +0100)]
ufs: drop vmtruncate

Removed vmtruncate

Signed-off-by: Marco Stornelli <marco.stornelli@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agofs: Fix imbalance in freeze protection in mark_files_ro()
Jan Kara [Wed, 5 Dec 2012 13:40:14 +0000 (14:40 +0100)]
fs: Fix imbalance in freeze protection in mark_files_ro()

File descriptors (even those for writing) do not hold freeze protection.
Thus mark_files_ro() must call __mnt_drop_write() to only drop protection
against remount read-only. Calling mnt_drop_write_file() as we do now
results in:

[ BUG: bad unlock balance detected! ]
3.7.0-rc6-00028-g88e75b6 #101 Not tainted
-------------------------------------
kworker/1:2/79 is trying to release lock (sb_writers) at:
[<ffffffff811b33b4>] mnt_drop_write+0x24/0x30
but there are no more locks to release!

Reported-by: Zdenek Kabelac <zkabelac@redhat.com>
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agovfs: remove DCACHE_NEED_LOOKUP
Jeff Layton [Wed, 28 Nov 2012 16:30:53 +0000 (11:30 -0500)]
vfs: remove DCACHE_NEED_LOOKUP

The code that relied on that flag was ripped out of btrfs quite some
time ago, and never added back. Josef indicated that he was going to
take a different approach to the problem in btrfs, and that we
could just eliminate this flag.

Cc: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agopath_init(): make -ENOTDIR failure exits consistent
Al Viro [Thu, 20 Dec 2012 18:41:28 +0000 (13:41 -0500)]
path_init(): make -ENOTDIR failure exits consistent

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agovfs: remove unneeded permission check from path_init
Jeff Layton [Tue, 11 Dec 2012 13:56:16 +0000 (08:56 -0500)]
vfs: remove unneeded permission check from path_init

When path_init is called with a valid dfd, that code checks permissions
on the open directory fd and returns an error if the check fails. This
permission check is redundant, however.

Both callers of path_init immediately call link_path_walk afterward. The
first thing that link_path_walk does for pathnames that do not consist
only of slashes is to check for exec permissions at the starting point of
the path walk.  And this check in path_init() is on the path taken only
when *name != '/' && *name != '\0'.

In most cases, these checks are very quick, but when the dfd is for a
file on a NFS mount with the actimeo=0, each permission check goes
out onto the wire. The result is 2 identical ACCESS calls.

Given that these codepaths are fairly "hot", I think it makes sense to
eliminate the permission check in path_init and simply assume that the
caller will eventually check the permissions before proceeding.

Reported-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agovfs, freeze: use ACCESS_ONCE() to guard access to ->mnt_flags
Miao Xie [Fri, 16 Nov 2012 09:23:50 +0000 (17:23 +0800)]
vfs, freeze: use ACCESS_ONCE() to guard access to ->mnt_flags

The compiler may optimize the while loop and make the check just be done once,
so we should use ACCESS_ONCE() to guard access to ->mnt_flags

Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc
Linus Torvalds [Thu, 20 Dec 2012 04:31:02 +0000 (20:31 -0800)]
Merge git://git./linux/kernel/git/davem/sparc

Pull sparc fixes from David Miller:
 "Please pull to get these sparc AES/DES/CAMELLIA crypto bug fixes as
  well as an addition of a pte_accessible() define for sparc64 and a
  hugetlb fix from Dave Kleikamp."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc64: Set CRYPTO_TFM_REQ_MAY_SLEEP consistently in CAMELLIA code.
  sparc64: Set CRYPTO_TFM_REQ_MAY_SLEEP consistently in DES code.
  sparc64: Fix ECB looping constructs in AES code.
  sparc64: Set CRYPTO_TFM_REQ_MAY_SLEEP consistently in AES code.
  sparc64: Fix AES ctr mode block size.
  sparc64: Fix unrolled AES 256-bit key loops.
  sparc64: Define pte_accessible()
  sparc: huge_ptep_set_* functions need to call set_huge_pte_at()

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Linus Torvalds [Thu, 20 Dec 2012 04:29:15 +0000 (20:29 -0800)]
Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:

 1) Really fix tuntap SKB use after free bug, from Eric Dumazet.

 2) Adjust SKB data pointer to point past the transport header before
    calling icmpv6_notify() so that the headers are in the state which
    that function expects.  From Duan Jiong.

 3) Fix ambiguities in the new tuntap multi-queue APIs.  From Jason
    Wang.

 4) mISDN needs to use del_timer_sync(), from Konstantin Khlebnikov.

 5) Don't destroy mutex after freeing up device private in mac802154,
    fix also from Konstantin Khlebnikov.

 6) Fix INET request socket leak in TCP and DCCP, from Christoph Paasch.

 7) SCTP HMAC kconfig rework, from Neil Horman.

 8) Fix SCTP jprobes function signature, otherwise things explode, from
    Daniel Borkmann.

 9) Fix typo in ipv6-offload Makefile variable reference, from Simon
    Arlott.

10) Don't fail USBNET open just because remote wakeup isn't supported,
    from Oliver Neukum.

11) be2net driver bug fixes from Sathya Perla.

12) SOLOS PCI ATM driver bug fixes from Nathan Williams and David
    Woodhouse.

13) Fix MTU changing regression in 8139cp driver, from John Greene.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (45 commits)
  solos-pci: ensure all TX packets are aligned to 4 bytes
  solos-pci: add firmware upgrade support for new models
  solos-pci: remove superfluous debug output
  solos-pci: add GPIO support for newer versions on Geos board
  8139cp: Prevent dev_close/cp_interrupt race on MTU change
  net: qmi_wwan: add ZTE MF880
  drivers/net: Use of_match_ptr() macro in smsc911x.c
  drivers/net: Use of_match_ptr() macro in smc91x.c
  ipv6: addrconf.c: remove unnecessary "if"
  bridge: Correctly encode addresses when dumping mdb entries
  bridge: Do not unregister all PF_BRIDGE rtnl operations
  use generic usbnet_manage_power()
  usbnet: generic manage_power()
  usbnet: handle PM failure gracefully
  ksz884x: fix receive polling race condition
  qlcnic: update driver version
  qlcnic: fix unused variable warnings
  net: fec: forbid FEC_PTP on SoCs that do not support
  be2net: fix wrong frag_idx reported by RX CQ
  be2net: fix be_close() to ensure all events are ack'ed
  ...

11 years agoMerge tags 'dt-for-linus', 'gpio-for-linus' and 'spi-for-linus' of git://git.secretla...
Linus Torvalds [Thu, 20 Dec 2012 04:26:16 +0000 (20:26 -0800)]
Merge tags 'dt-for-linus', 'gpio-for-linus' and 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6

Pull devicetree, gpio and spi bugfixes from Grant Likely:
 "Device tree v3.8 bug fix:
   - Fixes an undefined struct device build error and a missing symbol
     export.

  GPIO device driver bug fixes:
   - gpio/mvebu-gpio: Make mvebu-gpio depend on OF_CONFIG
   - gpio/ich: Add missing spinlock init

  SPI device driver bug fixes:
   - Most of this is bug fixes to the core code and the sh-hspi and
     s3c64xx device drivers.

   - There is also a patch here to add DT support to the Atmel driver.
     This one should have been in the first round, but I missed it.
     It's a low risk change contained within a single driver and the
     Atmel maintainer has requested it."

* tag 'dt-for-linus' of git://git.secretlab.ca/git/linux-2.6:
  of: define struct device in of_platform.h if !OF_DEVICE and !OF_ADDRESS
  of: Fix export of of_find_matching_node_and_match()

* tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6:
  gpio/mvebu-gpio: Make mvebu-gpio depend on OF_CONFIG
  gpio/ich: Add missing spinlock init

* tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6:
  spi/sh-hspi: fix return value check in hspi_probe().
  spi: fix tegra SPI binding examples
  spi/atmel: add DT support
  of/spi: Fix SPI module loading by using proper "spi:" modalias prefixes.
  spi: Change FIFO flush operation and spi channel off
  spi: Keep chipselect assertion during one message

11 years agoMerge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux
Linus Torvalds [Thu, 20 Dec 2012 04:24:25 +0000 (20:24 -0800)]
Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux

Pull drm bugfix from Dave Airlie:
 "Just a single urgent regression fix, seeing a few wierd behaviours I'd
  like not to persist."

* 'drm-next' of git://people.freedesktop.org/~airlied/linux:
  drm/ttm: fix delayed ttm_bo_cleanup_refs_and_unlock delayed handling

11 years agoMerge tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso...
Linus Torvalds [Thu, 20 Dec 2012 04:23:37 +0000 (20:23 -0800)]
Merge tag 'random_for_linus' of git://git./linux/kernel/git/tytso/random

Pull random updates from Ted Ts'o:
 "A few /dev/random improvements for the v3.8 merge window."

* tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
  random: Mix cputime from each thread that exits to the pool
  random: prime last_data value per fips requirements
  random: fix debug format strings
  random: make it possible to enable debugging without rebuild

11 years agosparc64: Set CRYPTO_TFM_REQ_MAY_SLEEP consistently in CAMELLIA code.
David S. Miller [Wed, 19 Dec 2012 23:44:31 +0000 (15:44 -0800)]
sparc64: Set CRYPTO_TFM_REQ_MAY_SLEEP consistently in CAMELLIA code.

We use the FPU and therefore cannot sleep during the crypto
loops.

Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agosparc64: Set CRYPTO_TFM_REQ_MAY_SLEEP consistently in DES code.
David S. Miller [Wed, 19 Dec 2012 23:43:38 +0000 (15:43 -0800)]
sparc64: Set CRYPTO_TFM_REQ_MAY_SLEEP consistently in DES code.

We use the FPU and therefore cannot sleep during the crypto
loops.

Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agosparc64: Fix ECB looping constructs in AES code.
David S. Miller [Wed, 19 Dec 2012 23:30:07 +0000 (15:30 -0800)]
sparc64: Fix ECB looping constructs in AES code.

Things works better when you increment the source buffer pointer
properly.

Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agosparc64: Set CRYPTO_TFM_REQ_MAY_SLEEP consistently in AES code.
David S. Miller [Wed, 19 Dec 2012 23:22:03 +0000 (15:22 -0800)]
sparc64: Set CRYPTO_TFM_REQ_MAY_SLEEP consistently in AES code.

We use the FPU and therefore cannot sleep during the crypto
loops.

Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agosparc64: Fix AES ctr mode block size.
David S. Miller [Wed, 19 Dec 2012 23:20:23 +0000 (15:20 -0800)]
sparc64: Fix AES ctr mode block size.

Like the generic versions, we need to support a block size
of '1' for CTR mode AES.

This was discovered thanks to all of the new test cases added by
Jussi Kivilinna.

Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agosparc64: Fix unrolled AES 256-bit key loops.
David S. Miller [Wed, 19 Dec 2012 23:19:11 +0000 (15:19 -0800)]
sparc64: Fix unrolled AES 256-bit key loops.

The basic scheme of the block mode assembler is that we start by
enabling the FPU, loading the key into the floating point registers,
then iterate calling the encrypt/decrypt routine for each block.

For the 256-bit key cases, we run short on registers in the unrolled
loops.

So the {ENCRYPT,DECRYPT}_256_2() macros reload the key registers that
get clobbered.

The unrolled macros, {ENCRYPT,DECRYPT}_256(), are not mindful of this.

So if we have a mix of multi-block and single-block calls, the
single-block unrolled 256-bit encrypt/decrypt can run with some
of the key registers clobbered.

Handle this by always explicitly loading those registers before using
the non-unrolled 256-bit macro.

This was discovered thanks to all of the new test cases added by
Jussi Kivilinna.

Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agosolos-pci: ensure all TX packets are aligned to 4 bytes
David Woodhouse [Wed, 19 Dec 2012 11:01:21 +0000 (11:01 +0000)]
solos-pci: ensure all TX packets are aligned to 4 bytes

The FPGA can't handled unaligned DMA (yet). So copy into an aligned buffer,
if skb->data isn't suitably aligned.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agosolos-pci: add firmware upgrade support for new models
Nathan Williams [Wed, 19 Dec 2012 11:01:20 +0000 (11:01 +0000)]
solos-pci: add firmware upgrade support for new models

Signed-off-by: Nathan Williams <nathan@traverse.com.au>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agosolos-pci: remove superfluous debug output
Nathan Williams [Wed, 19 Dec 2012 11:01:19 +0000 (11:01 +0000)]
solos-pci: remove superfluous debug output

Signed-off-by: Nathan Williams <nathan@traverse.com.au>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agosolos-pci: add GPIO support for newer versions on Geos board
Nathan Williams [Wed, 19 Dec 2012 11:01:18 +0000 (11:01 +0000)]
solos-pci: add GPIO support for newer versions on Geos board

dwmw2: Tidy up a little, simpler matching on which GPIO is being accessed,
       only register on newer boards, register under PCI device instead of
       duplicating them under each ATM device.

Signed-off-by: Nathan Williams <nathan@traverse.com.au>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years ago8139cp: Prevent dev_close/cp_interrupt race on MTU change
John Greene [Wed, 19 Dec 2012 09:47:48 +0000 (09:47 +0000)]
8139cp: Prevent dev_close/cp_interrupt race on MTU change

commit:  cb64edb6b89491edfdbae52ba7db9a8b8391d339 upstream

Above commit may introduce a race between cp_interrupt and dev_close
/ change MTU / dev_open up state. Changes cp_interrupt to tolerate
this.  Change spin_locking in cp_interrupt to avoid possible
but unobserved race.

Reported-by: "Francois Romieu" <romieu@fr.zoreil.com>
Tested on virtual hardware, Tx MTU size up to 4096, max tx payload
    was ping -s 4068 for MTU of 4096. No real hardware, need test
    assist.

Signed-off-by: "John Greene" <jogreene@redhat.com>
CC: "David S. Miller" <davem@davemloft.net>
CC: "David Woodhouse" <David.Woodhouse@intel.com>
Tested-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agogpio/mvebu-gpio: Make mvebu-gpio depend on OF_CONFIG
Gregory CLEMENT [Wed, 19 Dec 2012 11:31:11 +0000 (12:31 +0100)]
gpio/mvebu-gpio: Make mvebu-gpio depend on OF_CONFIG

When building without device tree support (for the mv78x00 SoCs for
example), the build failed because of_irq_count is undeclared. However
mvebu-gpio is not designed to build without device tree support. So
make it depends on OF_CONFIG, remove the #ifdef OF_CONFIG line and the
platform_device_id.

Tested on RD-78x00-mASA, DB-78460-BP, DB-88F6710-BP-DDR3,
DB-MV784MP-GP, Mirabox and OpenBlocks AX3.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
11 years agogpio/ich: Add missing spinlock init
Jean Delvare [Sun, 16 Dec 2012 20:31:40 +0000 (21:31 +0100)]
gpio/ich: Add missing spinlock init

As reported by CONFIG_DEBUG_SPINLOCK=y.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
11 years agodrm/ttm: fix delayed ttm_bo_cleanup_refs_and_unlock delayed handling
Maarten Lankhorst [Wed, 19 Dec 2012 17:21:10 +0000 (18:21 +0100)]
drm/ttm: fix delayed ttm_bo_cleanup_refs_and_unlock delayed handling

Fix regression introduced by 85b144f860176
"drm/ttm: call ttm_bo_cleanup_refs with reservation and lru lock held, v3"

Slowpath ttm_bo_cleanup_refs_and_unlock accidentally tried to increase
refcount on &bo->sync_obj instead of bo->sync_obj.

The compiler didn't complain since sync_obj_ref takes a void pointer,
so it was still valid c.

This could result in lockups, memory corruptions, and warnings like
these when graphics card VRAM usage is high:

------------[ cut here ]------------
WARNING: at include/linux/kref.h:42 radeon_fence_ref+0x2c/0x40()
Hardware name: System Product Name
Pid: 157, comm: X Not tainted 3.7.0-rc7-00520-g85b144f-dirty #174
Call Trace:
[<ffffffff81058c84>] ? warn_slowpath_common+0x74/0xb0
[<ffffffff8129273c>] ? radeon_fence_ref+0x2c/0x40
[<ffffffff8125e95c>] ? ttm_bo_cleanup_refs_and_unlock+0x18c/0x2d0
[<ffffffff8125f17c>] ? ttm_mem_evict_first+0x1dc/0x2a0
[<ffffffff81264452>] ? ttm_bo_man_get_node+0x62/0xb0
[<ffffffff8125f4ce>] ? ttm_bo_mem_space+0x28e/0x340
[<ffffffff8125fb0c>] ? ttm_bo_move_buffer+0xfc/0x170
[<ffffffff810de172>] ? kmem_cache_alloc+0xb2/0xc0
[<ffffffff8125fc15>] ? ttm_bo_validate+0x95/0x110
[<ffffffff8125ff7c>] ? ttm_bo_init+0x2ec/0x3b0
[<ffffffff8129419a>] ? radeon_bo_create+0x18a/0x200
[<ffffffff81293e80>] ? radeon_bo_clear_va+0x40/0x40
[<ffffffff812a5342>] ? radeon_gem_object_create+0x92/0x160
[<ffffffff812a575c>] ? radeon_gem_create_ioctl+0x6c/0x150
[<ffffffff812a529f>] ? radeon_gem_object_free+0x2f/0x40
[<ffffffff81246b60>] ? drm_ioctl+0x420/0x4f0
[<ffffffff812a56f0>] ? radeon_gem_pwrite_ioctl+0x20/0x20
[<ffffffff810f53a4>] ? do_vfs_ioctl+0x2e4/0x4e0
[<ffffffff810e5588>] ? vfs_read+0x118/0x160
[<ffffffff810f55ec>] ? sys_ioctl+0x4c/0xa0
[<ffffffff810e5851>] ? sys_read+0x51/0xa0
[<ffffffff814b0612>] ? system_call_fastpath+0x16/0x1b

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Acked-by: Paul Menzel <paulepanter@users.sourceforge.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
11 years agoMerge tag 'xtensa-20121218' of git://github.com/czankel/xtensa-linux
Linus Torvalds [Wed, 19 Dec 2012 21:05:22 +0000 (13:05 -0800)]
Merge tag 'xtensa-20121218' of git://github.com/czankel/xtensa-linux

Pull Xtensa patchset from Chris Zankel:
 "This contains support of device trees, many fixes, and code clean-ups"

* tag 'xtensa-20121218' of git://github.com/czankel/xtensa-linux: (33 commits)
  xtensa: don't try to build DTB when OF is disabled
  xtensa: set the correct ethernet address for xtfpga
  xtensa: clean up files to make them code-style compliant
  xtensa: provide endianness macro for sparse
  xtensa: fix RASID SR initialization
  xtensa: initialize CPENABLE SR when core has one
  xtensa: reset all timers on initialization
  Use for_each_compatible_node() macro.
  xtensa: add XTFPGA DTS
  xtensa: add support for the XTFPGA boards
  xtensa: add device trees support
  xtensa: add IRQ domains support
  xtensa: add U-Boot image support (uImage).
  xtensa: clean up boot make rules
  xtensa: fix mb and wmb definitions
  xtensa: add s32c1i-based spinlock implementations
  xtensa: add s32c1i-based bitops implementations
  xtensa: add s32c1i-based atomic ops implementations
  xtensa: add s32c1i sanity check
  xtensa: add trap_set_handler function
  ...

11 years agoMerge branch 'x86/nuke386' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Linus Torvalds [Wed, 19 Dec 2012 21:02:23 +0000 (13:02 -0800)]
Merge branch 'x86/nuke386' of git://git./linux/kernel/git/tip/tip

Pull one final 386 removal patch from Peter Anvin.

IRQ 13 FPU error handling is gone.  That was not one of the proudest
moments in PC history.

* 'x86/nuke386' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, 386 removal: Remove support for IRQ 13 FPU error reporting

11 years agoMerge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Wed, 19 Dec 2012 20:56:42 +0000 (12:56 -0800)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull small x86 fixes from Peter Anvin:
 "A collection of very small fixes, mostly pure documentation."

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, doc: Document that bootloader ID 4 is used also by iPXE
  x86, doc: Add a formal bootloader ID for kexec-tools
  x86, 8042: Enable A20 using KBC to fix S3 resume on some MSI laptops

11 years agonet: qmi_wwan: add ZTE MF880
Bjørn Mork [Wed, 19 Dec 2012 04:15:51 +0000 (04:15 +0000)]
net: qmi_wwan: add ZTE MF880

The driver description files gives these names to the vendor specific
functions on this modem:

 diag: VID_19D2&PID_0284&MI_00
 nmea: VID_19D2&PID_0284&MI_01
 at:   VID_19D2&PID_0284&MI_02
 mdm:  VID_19D2&PID_0284&MI_03
 net:  VID_19D2&PID_0284&MI_04

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agodrivers/net: Use of_match_ptr() macro in smsc911x.c
Sachin Kamat [Wed, 19 Dec 2012 01:17:10 +0000 (01:17 +0000)]
drivers/net: Use of_match_ptr() macro in smsc911x.c

Add CONFIG_OF guard and use of_match_ptr macro.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agodrivers/net: Use of_match_ptr() macro in smc91x.c
Sachin Kamat [Wed, 19 Dec 2012 01:17:09 +0000 (01:17 +0000)]
drivers/net: Use of_match_ptr() macro in smc91x.c

This eliminates having an #ifdef returning NULL for the case
when OF is disabled.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoipv6: addrconf.c: remove unnecessary "if"
Cong Ding [Tue, 18 Dec 2012 12:08:56 +0000 (12:08 +0000)]
ipv6: addrconf.c: remove unnecessary "if"

the value of err is always negative if it goes to errout, so we don't need to
check the value of err.

Signed-off-by: Cong Ding <dinggnu@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agobridge: Correctly encode addresses when dumping mdb entries
Vlad Yasevich [Tue, 18 Dec 2012 11:54:08 +0000 (11:54 +0000)]
bridge: Correctly encode addresses when dumping mdb entries

When dumping mdb table, set the addresses the kernel returns
based on the address protocol type.

Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Acked-by: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agobridge: Do not unregister all PF_BRIDGE rtnl operations
Vlad Yasevich [Wed, 19 Dec 2012 09:13:48 +0000 (09:13 +0000)]
bridge: Do not unregister all PF_BRIDGE rtnl operations

Bridge fdb and link rtnl operations are registered in
core/rtnetlink.  Bridge mdb operations are registred
in bridge/mdb.  When removing bridge module, do not
unregister ALL PF_BRIDGE ops since that would remove
the ops from rtnetlink as well.  Do remove mdb ops when
bridge is destroyed.

Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoMerge tag 'for-linus-20121219' of git://git.infradead.org/linux-mtd
Linus Torvalds [Wed, 19 Dec 2012 20:47:41 +0000 (12:47 -0800)]
Merge tag 'for-linus-20121219' of git://git.infradead.org/linux-mtd

Pull MTD updates from David Woodhouse:
 - Various cleanups especially in NAND tests
 - Add support for NAND flash on BCMA bus
 - DT support for sh_flctl and denali NAND drivers
 - Kill obsolete/superceded drivers (fortunet, nomadik_nand)
 - Fix JFFS2 locking bug in ENOMEM failure path
 - New SPI flash chips, as usual
 - Support writing in 'reliable mode' for DiskOnChip G4
 - Debugfs support in nandsim

* tag 'for-linus-20121219' of git://git.infradead.org/linux-mtd: (96 commits)
  mtd: nand: typo in nand_id_has_period() comments
  mtd: nand/gpio: use io{read,write}*_rep accessors
  mtd: block2mtd: throttle writes by calling balance_dirty_pages_ratelimited.
  mtd: nand: gpmi: reset BCH earlier, too, to avoid NAND startup problems
  mtd: nand/docg4: fix and improve read of factory bbt
  mtd: nand/docg4: reserve bb marker area in ecclayout
  mtd: nand/docg4: add support for writing in reliable mode
  mtd: mxc_nand: reorder part_probes to let cmdline override other sources
  mtd: mxc_nand: fix unbalanced clk_disable() in error path
  mtd: nandsim: Introduce debugfs infrastructure
  mtd: physmap_of: error checking to prevent a NULL pointer dereference
  mtg: docg3: potential divide by zero in doc_write_oob()
  mtd: bcm47xxnflash: writing support
  mtd: tests/read: initialize buffer for whole next page
  mtd: at91: atmel_nand: return bit flips for the PMECC read_page()
  mtd: fix recovery after failed write-buffer operation in cfi_cmdset_0002.c
  mtd: nand: onfi need to be probed in 8 bits mode
  mtd: nand: add NAND_BUSWIDTH_AUTO to autodetect bus width
  mtd: nand: print flash size during detection
  mted: nand_wait_ready timeout fix
  ...

11 years agouse generic usbnet_manage_power()
Oliver Neukum [Tue, 18 Dec 2012 04:46:12 +0000 (04:46 +0000)]
use generic usbnet_manage_power()

This covers the drivers that can use a primitive
implementation.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agousbnet: generic manage_power()
Oliver Neukum [Tue, 18 Dec 2012 04:45:52 +0000 (04:45 +0000)]
usbnet: generic manage_power()

Centralise common code for manage_power() in usbnet
by making a generic simple implementation

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agousbnet: handle PM failure gracefully
Oliver Neukum [Tue, 18 Dec 2012 04:45:29 +0000 (04:45 +0000)]
usbnet: handle PM failure gracefully

If a device fails to do remote wakeup, this is no reason
to abort an open totally. This patch just continues without
runtime PM.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoksz884x: fix receive polling race condition
Lennert Buytenhek [Tue, 18 Dec 2012 03:57:00 +0000 (03:57 +0000)]
ksz884x: fix receive polling race condition

The ksz884x driver does receive processing in a custom tasklet, and
seems to be assuming that since it takes its private interface spinlock
with spin_lock_irq(), it won't be running concurrently with its own
interrupt handler, as it cannot be preempted by it, but since its
interrupt handler doesn't do any locking whatsoever, the receive
processing tasklet and interrupt handler can end up running concurrently
on different CPUs.

As a result of this, the ksz884x receive path ends up locking up fairly
easily, when the receive processing tasklet's reenabling of receive
interrupts (due to it being done with polling the receive ring) races
with the interrupt handler's disabling of receive interrupts (due to a
new receive interrupt coming in) resulting in the receive interrupt
being masked but the receive processing tasklet not being scheduled.

Fix this by making the ksz884x interrupt handler take its private
interface spinlock.  This requires upgrading the spin_lock() in the
transmit cleanup tasklet to a spin_lock_irq(), as otherwise the IRQ
handler can preempt transmit cleanup and deadlock the system, but
with those two changes, no more receive lockups have been observed.

Reported-by: Chris Healy <cphealy@gmail.com>
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
----
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoqlcnic: update driver version
Signed-off-by: Sony Chacko [Tue, 18 Dec 2012 07:59:51 +0000 (07:59 +0000)]
qlcnic: update driver version

Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoqlcnic: fix unused variable warnings
Shahed Shaikh [Tue, 18 Dec 2012 07:59:50 +0000 (07:59 +0000)]
qlcnic: fix unused variable warnings

qlcnic_hw.c:370: warning: variable cmd_desc set but not used
qlcnic_hw.c:368: warning: variable consumer set but not used
qlcnic_main.c:448: warning: variable ref_count set but not used
qlcnic_main.c:534: warning: variable mem_base set but not used
qlcnic_ctx.c:137: warning: variable tmp_tmpl set but not used
qlcnic_ctx.c:133: warning: variable version set but not used
qlcnic_minidump.c:200: warning: variable opcode set but not used

Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agowatchdog: Fix disable/enable regression
Bjørn Mork [Wed, 19 Dec 2012 19:51:31 +0000 (20:51 +0100)]
watchdog: Fix disable/enable regression

Commit 8d4516904b39 ("watchdog: Fix CPU hotplug regression") causes an
oops or hard lockup when doing

 echo 0 > /proc/sys/kernel/nmi_watchdog
 echo 1 > /proc/sys/kernel/nmi_watchdog

and the kernel is booted with nmi_watchdog=1 (default)

Running laptop-mode-tools and disconnecting/connecting AC power will
cause this to trigger, making it a common failure scenario on laptops.

Instead of bailing out of watchdog_disable() when !watchdog_enabled we
can initialize the hrtimer regardless of watchdog_enabled status.  This
makes it safe to call watchdog_disable() in the nmi_watchdog=0 case,
without the negative effect on the enabled => disabled => enabled case.

All these tests pass with this patch:
- nmi_watchdog=1
  echo 0 > /proc/sys/kernel/nmi_watchdog
  echo 1 > /proc/sys/kernel/nmi_watchdog

- nmi_watchdog=0
  echo 0 > /sys/devices/system/cpu/cpu1/online

- nmi_watchdog=0
  echo mem > /sys/power/state

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=51661

Cc: <stable@vger.kernel.org> # v3.7
Cc: Norbert Warmuth <nwarmuth@t-online.de>
Cc: Joseph Salisbury <joseph.salisbury@canonical.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
John W. Linville [Wed, 19 Dec 2012 18:00:00 +0000 (13:00 -0500)]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless into for-davem

11 years agoMerge tag 'for-3.8-rc1' of git://gitorious.org/linux-pwm/linux-pwm
Linus Torvalds [Wed, 19 Dec 2012 16:19:07 +0000 (08:19 -0800)]
Merge tag 'for-3.8-rc1' of git://gitorious.org/linux-pwm/linux-pwm

Pull pwm changes from Thierry Reding:
 "A new driver has been added for the SPEAr platform and the
  TWL4030/6030 driver has been replaced by two drivers that control the
  regular PWMs and the PWM driven LEDs provided by the chips.

  The vt8500, tiecap, tiehrpwm, i.MX, LPC32xx and Samsung drivers have
  all been improved and the device tree bindings now support the PWM
  signal polarity."

Fix up trivial conflicts due to __devinit/exit removal.

* tag 'for-3.8-rc1' of git://gitorious.org/linux-pwm/linux-pwm: (21 commits)
  pwm: samsung: add missing s3c->pwm_id assignment
  pwm: lpc32xx: Set the chip base for dynamic allocation
  pwm: lpc32xx: Properly disable the clock on device removal
  pwm: lpc32xx: Fix the PWM polarity
  pwm: i.MX: eliminate build warning
  pwm: Export of_pwm_xlate_with_flags()
  pwm: Remove pwm-twl6030 driver
  pwm: New driver to support PWM driven LEDs on TWL4030/6030 series of PMICs
  pwm: New driver to support PWMs on TWL4030/6030 series of PMICs
  pwm: pwm-tiehrpwm: pinctrl support
  pwm: tiehrpwm: Add device-tree binding
  pwm: pwm-tiehrpwm: Adding TBCLK gating support.
  pwm: pwm-tiecap: pinctrl support
  pwm: tiecap: Add device-tree binding
  pwm: Add TI PWM subsystem driver
  pwm: Device tree support for PWM polarity
  pwm: vt8500: Ensure PWM clock is enabled during pwm_config
  pwm: vt8500: Fix build error
  pwm: spear: Staticize spear_pwm_config()
  pwm: Add SPEAr PWM chip driver support
  ...

11 years agoof: define struct device in of_platform.h if !OF_DEVICE and !OF_ADDRESS
Jonas Gorski [Wed, 19 Dec 2012 15:10:09 +0000 (09:10 -0600)]
of: define struct device in of_platform.h if !OF_DEVICE and !OF_ADDRESS

Fixes the following warning:

include/linux/of_platform.h:106:13: warning: 'struct device' declared
inside parameter list [enabled by default]
include/linux/of_platform.h:106:13: warning: its scope is only this
definition or declaration, which is probably not what you want [enabled
by default]

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Rob Herring <robherring2@gmail.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
11 years agoMerge tag 'for-v3.8-part2' of git://git.infradead.org/battery-2.6
Linus Torvalds [Wed, 19 Dec 2012 16:14:08 +0000 (08:14 -0800)]
Merge tag 'for-v3.8-part2' of git://git.infradead.org/battery-2.6

Pull battery update, part 2, from Anton Vorontsov:
 "These are left overs that I didn't have time to review/apply before
  the merge window opened.  I didn't want to "spoil" the first pull
  request with these late patches, so they were not included:

   - A small patch for the RX51 OMAP board (Nokia N900 phone), the patch
     creates a battery monitor device instance, so that it can be
     probed.  It was acked by the OMAP maintainer;

   - A couple of late bug fixes for the charger-manager: corrects corner
     cases for the battery full handling."

* tag 'for-v3.8-part2' of git://git.infradead.org/battery-2.6:
  charger-manager: Fix bug when check dropped voltage after fullbatt event
  charger-manager: Fix bug related to checking fully charged state of battery
  ARM: OMAP: rx51: Register platform device for rx51_battery

11 years agoMerge tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Wed, 19 Dec 2012 15:55:08 +0000 (07:55 -0800)]
Merge tag 'modules-next-for-linus' of git://git./linux/kernel/git/rusty/linux

Pull module update from Rusty Russell:
 "Nothing all that exciting; a new module-from-fd syscall for those who
  want to verify the source of the module (ChromeOS) and/or use standard
  IMA on it or other security hooks."

* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  MODSIGN: Fix kbuild output when using default extra_certificates
  MODSIGN: Avoid using .incbin in C source
  modules: don't hand 0 to vmalloc.
  module: Remove a extra null character at the top of module->strtab.
  ASN.1: Use the ASN1_LONG_TAG and ASN1_INDEFINITE_LENGTH constants
  ASN.1: Define indefinite length marker constant
  moduleparam: use __UNIQUE_ID()
  __UNIQUE_ID()
  MODSIGN: Add modules_sign make target
  powerpc: add finit_module syscall.
  ima: support new kernel module syscall
  add finit_module syscall to asm-generic
  ARM: add finit_module syscall to ARM
  security: introduce kernel_module_from_file hook
  module: add flags arg to sys_finit_module()
  module: add syscall to load module from fd

11 years agoMerge tag 'byteswap-for-linus-20121219' of git://git.infradead.org/users/dwmw2/byteswap
Linus Torvalds [Wed, 19 Dec 2012 15:52:48 +0000 (07:52 -0800)]
Merge tag 'byteswap-for-linus-20121219' of git://git.infradead.org/users/dwmw2/byteswap

Pull preparatory gcc intrisics bswap patch from David Woodhouse:
 "This single patch is effectively a no-op for now.  It enables
  architectures to opt in to using GCC's __builtin_bswapXX() intrinsics
  for byteswapping, and if we merge this now then the architecture
  maintainers can enable it for their arch during the next cycle without
  dependency issues.

  It's worth making it a par-arch opt-in, because although in *theory*
  the compiler should never do worse than hand-coded assembler (and of
  course it also ought to do a lot better on platforms like Atom and
  PowerPC which have load-and-swap or store-and-swap instructions), that
  isn't always the case.  See

     http://gcc.gnu.org/bugzilla/show_bug.cgi?id=46453

  for example."

* tag 'byteswap-for-linus-20121219' of git://git.infradead.org/users/dwmw2/byteswap:
  byteorder: allow arch to opt to use GCC intrinsics for byteswapping

11 years agoblk: avoid divide-by-zero with zero discard granularity
Linus Torvalds [Wed, 19 Dec 2012 15:18:35 +0000 (07:18 -0800)]
blk: avoid divide-by-zero with zero discard granularity

Commit 8dd2cb7e880d ("block: discard granularity might not be power of
2") changed a couple of 'binary and' operations into modulus operations.
Which turned the harmless case of a zero discard_granularity into a
possible divide-by-zero.

The code also had a much more subtle bug: it was doing the modulus of a
value in bytes using 'sector_t'.  That was always conceptually wrong,
but didn't actually matter back when the code assumed a power-of-two
granularity: we only looked at the low bits anyway.

But with potentially arbitrary sector numbers, using a 'sector_t' to
express bytes is very very wrong: depending on configuration it limits
the starting offset of the device to just 32 bits, and any overflow
would result in a wrong value if the modulus wasn't a power-of-two.

So re-write the code to not only protect against the divide-by-zero, but
to do the starting sector arithmetic in sectors, and using the proper
types.

[ For any mathematicians out there: it also looks monumentally stupid to
  do the 'modulo granularity' operation *twice*, never mind having a "+
  granularity" in the second modulus op.

  But that's the easiest way to avoid negative values or overflow, and
  it is how the original code was done. ]

Reported-by: Ingo Molnar <mingo@kernel.org>
Reported-by: Doug Anderson <dianders@chromium.org>
Cc: Neil Brown <neilb@suse.de>
Cc: Shaohua Li <shli@fusionio.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agospi/sh-hspi: fix return value check in hspi_probe().
Cyril Roelandt [Wed, 12 Dec 2012 00:24:54 +0000 (01:24 +0100)]
spi/sh-hspi: fix return value check in hspi_probe().

According to its documentation, clk_get() returns a "valid IS_ERR() condition
containing errno", so we should call IS_ERR() rather than a NULL check.

Signed-off-by: Cyril Roelandt <tipecaml@gmail.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
11 years agospi: fix tegra SPI binding examples
Allen Martin [Fri, 14 Dec 2012 19:05:12 +0000 (11:05 -0800)]
spi: fix tegra SPI binding examples

Fix name of slink binding and address of sflash example to make it
self consistent.

Signed-off-by: Allen Martin <amartin@nvidia.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
11 years agoof: Fix export of of_find_matching_node_and_match()
Grant Likely [Wed, 19 Dec 2012 10:45:36 +0000 (10:45 +0000)]
of: Fix export of of_find_matching_node_and_match()

Commit 50c8af4cf9, "of: introduce for_each_matching_node_and_match()"
renamed of_find_matching_node() to of_find_matching_node_and_match() and
created a new static inline of_find_matching_node() wrapper around the
new name. However, the change neglected to change the EXPORT_SYMBOL()
reference causing build errors for modules.

This patch fixes the EXPORT_SYMBOL() statement. Discovered on a PowerPC
Efika build with the mpc52xx_uart driver being built as a module.

Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
11 years agoxtensa: don't try to build DTB when OF is disabled
Max Filippov [Mon, 10 Dec 2012 21:26:21 +0000 (01:26 +0400)]
xtensa: don't try to build DTB when OF is disabled

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
11 years agoxtensa: set the correct ethernet address for xtfpga
Chris Zankel [Thu, 29 Nov 2012 00:52:09 +0000 (16:52 -0800)]
xtensa: set the correct ethernet address for xtfpga

The last byte of the mac address is determined by a DIP switch, so
update the OF property with that address.

Signed-off-by: Chris Zankel <chris@zankel.net>
11 years agoxtensa: clean up files to make them code-style compliant
Chris Zankel [Thu, 29 Nov 2012 00:53:51 +0000 (16:53 -0800)]
xtensa: clean up files to make them code-style compliant

Remove heading and trailing spaces, trim trailing lines, and wrap lines
that are longer than 80 characters.

Signed-off-by: Chris Zankel <chris@zankel.net>
11 years agoxtensa: provide endianness macro for sparse
Max Filippov [Mon, 10 Dec 2012 21:26:25 +0000 (01:26 +0400)]
xtensa: provide endianness macro for sparse

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
11 years agoxtensa: fix RASID SR initialization
Max Filippov [Mon, 10 Dec 2012 21:26:24 +0000 (01:26 +0400)]
xtensa: fix RASID SR initialization

set_rasid_register accepts new RASID SR value, but ASID_USER_FIRST is
ASID value for the ring 1; RASID value is made by ASID_INSERT macro.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
11 years agoxtensa: initialize CPENABLE SR when core has one
Max Filippov [Mon, 10 Dec 2012 21:26:23 +0000 (01:26 +0400)]
xtensa: initialize CPENABLE SR when core has one

XCHAL_CP_NUM is defined in variant/tie.h and it is not included by
head.S, leaving CPENABLE register uninitialised. XCHAL_HAVE_CP is
defined in variant/core.h to 1 when core has CPENABLE SR.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
11 years agoxtensa: reset all timers on initialization
Max Filippov [Mon, 10 Dec 2012 21:26:22 +0000 (01:26 +0400)]
xtensa: reset all timers on initialization

There are XCHAL_NUM_TIMERS, reset them all.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
11 years agoUse for_each_compatible_node() macro.
Wei Yongjun [Mon, 3 Dec 2012 08:35:11 +0000 (00:35 -0800)]
Use for_each_compatible_node() macro.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
11 years agoxtensa: add XTFPGA DTS
Max Filippov [Sat, 3 Nov 2012 08:57:52 +0000 (12:57 +0400)]
xtensa: add XTFPGA DTS

Add common XTFPGA parts as *.dtsi (base board, flash) and DTS for LX60
and for ML605.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
11 years agoxtensa: add support for the XTFPGA boards
Max Filippov [Mon, 5 Nov 2012 03:37:14 +0000 (07:37 +0400)]
xtensa: add support for the XTFPGA boards

The Avnet LX60/LX110/LX200 board is an FPGA board that can be configured with
an Xtensa processor and an OpenCores Ethernet device.

Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
11 years agoxtensa: add device trees support
Max Filippov [Sat, 3 Nov 2012 20:30:13 +0000 (00:30 +0400)]
xtensa: add device trees support

Device trees allow specification of hardware topology and device
parameters at runtime instead of hard-coding them in platform setup
code. This allows running single binary kernel on a range of compatible
boards.

New boot parameters tag BP_TAG_FDT is allocated and a pointer to flat
device tree is passed in it.

Note that current interrupt mapping scheme uses single cell for
interrupt identification. That means that IRQ numbers used in DTS must
be CPU internal IRQ numbers, not external. It is possible to extend
interrupt identification to two cells, and use second cell to tell
external IRQ numbers form internal. That would allow to use single DTS
on multiple boards with different mapping of external IRQ numbers.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
11 years agoxtensa: add IRQ domains support
Max Filippov [Sat, 3 Nov 2012 20:29:12 +0000 (00:29 +0400)]
xtensa: add IRQ domains support

IRQ domains provide a mechanism for conversion of linux IRQ numbers to
hardware IRQ numbers and vice versus. It is used by OpenFirmware for
linking device tree objects to their respective interrupt controllers.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
11 years agoxtensa: add U-Boot image support (uImage).
Max Filippov [Mon, 5 Nov 2012 03:36:00 +0000 (07:36 +0400)]
xtensa: add U-Boot image support (uImage).

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
11 years agoxtensa: clean up boot make rules
Max Filippov [Mon, 5 Nov 2012 05:10:00 +0000 (09:10 +0400)]
xtensa: clean up boot make rules

- remove duplicate rules for binary and packed image
- use predefined macros for ld/objcopy/gzip
- remove build-id section from bootable elf image

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
11 years agoxtensa: fix mb and wmb definitions
Max Filippov [Sat, 24 Nov 2012 02:22:08 +0000 (06:22 +0400)]
xtensa: fix mb and wmb definitions

Define mb and wmb as memw to force memory barrier.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
11 years agoxtensa: add s32c1i-based spinlock implementations
Max Filippov [Sun, 11 Nov 2012 03:01:21 +0000 (07:01 +0400)]
xtensa: add s32c1i-based spinlock implementations

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
11 years agoxtensa: add s32c1i-based bitops implementations
Max Filippov [Sun, 11 Nov 2012 01:47:25 +0000 (05:47 +0400)]
xtensa: add s32c1i-based bitops implementations

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
11 years agoxtensa: add s32c1i-based atomic ops implementations
Max Filippov [Sat, 10 Nov 2012 23:30:02 +0000 (03:30 +0400)]
xtensa: add s32c1i-based atomic ops implementations

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
11 years agoxtensa: add s32c1i sanity check
Max Filippov [Wed, 28 Nov 2012 07:33:02 +0000 (11:33 +0400)]
xtensa: add s32c1i sanity check

Add a brief sanity test of S32C1I functionality.  This instruction
is needed by the kernel and userland as part of the base ABI
(including GCC atomic builtins, certain threading packages, future
atomic support in the C++ standard, etc).  However, correct operation
of this instruction requires some cooperation by hardware external to
the processor (such as bus bridge, bus fabric, or memory controller).
Minimally exercising this mechanism and reporting explicit status
early in the boot process is helpful to chip vendors using the Linux
kernel as a benchmark of correctness of hardware.

As it turns out, S32C1I is not exercised by the kernel and by uClibc
based userland as of early June 2008.  This is expected to change
soon as both incorporate more recent open source developments.

Signed-off-by: Marc Gauthier <marc@tensilica.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
11 years agoxtensa: add trap_set_handler function
Max Filippov [Mon, 19 Nov 2012 04:30:15 +0000 (08:30 +0400)]
xtensa: add trap_set_handler function

trap_set_handler sets new C-handler in the exception table and returns
previous handler.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
11 years agoxtensa: initialize atomctl SR
Max Filippov [Mon, 19 Nov 2012 03:00:41 +0000 (07:00 +0400)]
xtensa: initialize atomctl SR

In order to use S32C1I instruction on cores with ATOMCTL SR the register
must be properly initialized.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
11 years agoxtensa: save and restore scompare1 SR on kernel entry
Max Filippov [Thu, 15 Nov 2012 02:25:48 +0000 (06:25 +0400)]
xtensa: save and restore scompare1 SR on kernel entry

Although scompare1 may be saved/restored by xchal_ncp_{load,store}
macros, explicit save/restore of registers manipulated by the kernel
itself is considered more correct.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
11 years agoxtensa: display s32c1i feature flag in cpuinfo
Max Filippov [Sun, 11 Nov 2012 00:44:22 +0000 (04:44 +0400)]
xtensa: display s32c1i feature flag in cpuinfo

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
11 years agoxtensa: fix CPU cache flags formatting
Max Filippov [Sat, 10 Nov 2012 21:29:10 +0000 (01:29 +0400)]
xtensa: fix CPU cache flags formatting

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
11 years agoxtensa: properly fix missing compiler barrier in simcall
Max Filippov [Mon, 22 Oct 2012 04:42:39 +0000 (08:42 +0400)]
xtensa: properly fix missing compiler barrier in simcall

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
11 years agoxtensa: fix build warning for arch/xtensa/mm/tlb.c
Max Filippov [Mon, 5 Nov 2012 03:44:03 +0000 (07:44 +0400)]
xtensa: fix build warning for arch/xtensa/mm/tlb.c

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
11 years agoxtensa: provide DMA_ERROR_CODE definition
Max Filippov [Thu, 1 Nov 2012 14:38:27 +0000 (18:38 +0400)]
xtensa: provide DMA_ERROR_CODE definition

This fixes the following allmodconfig build error:

drivers/uio/uio_dmem_genirq.c:95:18: error: 'DMA_ERROR_CODE' undeclared (first use in this function)
drivers/uio/uio_dmem_genirq.c:238:18: error: 'DMA_ERROR_CODE' undeclared (first use in this function)
make[3]: *** [drivers/uio/uio_dmem_genirq.o] Error 1

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
11 years agoxtensa: ISS: add BASE_BAUD definition to serial.h
Max Filippov [Wed, 31 Oct 2012 08:37:04 +0000 (12:37 +0400)]
xtensa: ISS: add BASE_BAUD definition to serial.h

This fixes the following build error in allyesconfig:

drivers/tty/serial/8250/8250_early.c: In function 'parse_options':
drivers/tty/serial/8250/8250_early.c:160:18: error: 'BASE_BAUD' undeclared (first use in this function)

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
11 years agoxtensa: provide proper assembler function boundaries with ENDPROC()
Chris Zankel [Sat, 17 Nov 2012 00:16:20 +0000 (16:16 -0800)]
xtensa: provide proper assembler function boundaries with ENDPROC()

Use ENDPROC() to mark the end of assembler functions.

Signed-off-by: Chris Zankel <chris@zankel.net>
11 years agoxtensa: make DoubleExceptionVector literals fit the gap
Max Filippov [Thu, 9 Aug 2012 01:25:35 +0000 (05:25 +0400)]
xtensa: make DoubleExceptionVector literals fit the gap

Manually load references to exc_table from the explicit literal in order
to fit DoubleExceptionVector.literals into the available 16-byte gap
before DoubleExceptionVector.text in the absence of link time
relaxation. Without this fix DoubleExceptionVector.literal section
overlaps DoubleExceptionVector.text section in the linked vmlinux image.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
11 years agoxtensa: add config option to disable linker relaxation
Chris Zankel [Tue, 13 Nov 2012 23:16:36 +0000 (15:16 -0800)]
xtensa: add config option to disable linker relaxation

The default linker behavior is to optimize identical literal values and
remove unnecessary overhead from assembler-generated "longcall" sequences
to reduce code size. Provide an option to disable this behavior to improve
compile time.

Signed-off-by: Chris Zankel <chris@zankel.net>