drm/amd/display: add mechanism to skip DCN init

[Why]
If optimized init is done in FW. DCN init be skipped in driver. This
need to be communicated between driver and fw and maintain backwards
compatibility.

[How]
Use DMUB scratch 0 bit 2 to indicate optimized init done in fw and
use DMUB scatch 4 bit 0 to indicate drive supports the optimized flow
so FW will perform it.

Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fine tune logic of edid max TMDS clock check

[WHY]
Check max_tmds_clk_mhz firstly will restrict pixel clock under HDMI
1.4, thus HDMI2.0 port can't correctly support 4K 60Hz.

[HOW]
Fine tune the logic to check max_forum_tmds_clk_mhz firstly.

Signed-off-by: Dale Zhao <dale.zhao@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Added local_sink null check before access

[Why & How]
Need to check if local_sink is NULL before accessing.

Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: clip plane rects in DM before passing into DC

[Why]
DC global validation can fail when userspace requests to draw large
plane without performing the clipping themselves.

This is observed in the IGT kms_plane panning tests for 4K displays
where they draw an 8K plane without any clipping while expecting only
the top 4K to be drawn.

[How]
DRM already has helpers to take care of the clipping necessary and to
mark whether a plane is visible or not, so make use of these helpers
in DM before passing the plane to DC.

Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.90

Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: [FW Promotion] Release 1.0.18

[Header Changes]
- Update scratch information for boot status

Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Correctly respond in psr enablement interface

[Why]
dc_link_set_psr_allow_active() always returns true, even in the case
that PSR is not supported.

[How]
Hook up the return value of dc_link_set_psr_allow_active().

Signed-off-by: Camille Cho <Camille.Cho@amd.com>
Reviewed-by: Josip Pavic <Josip.Pavic@amd.com>
Acked-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix DML failures caused by doubled stereo viewport

[Why]
Side-by-side and Top-and-bottom stereo configurations fail DML mode
validation due to Viewport exceeded.

This is because we consider the planes as being pipe split in pipe
population so we end up doubling the viewport width, eg. from 4k to 8k.

[How]
These pipes technically aren't hsplit, so add a check for determining
whether is_hsplit should be set.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: enable assr

[Why]
assr is content protection for eDP, in order to use it we need to call
psp ta (dtm)

[How]
We have a enable_assr callback, hook into this and call the correct psp
cmd id to enable assr.

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: implement edid max TMDS clock check in DC

[WHY]
Currently DC doesn't check requested pixel clock against an EDID
specified TMDS max clock if it exists, passing modes that should fail

[HOW]
Add max TMDS clk to edid caps and perform check during validation

Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: [FW Promotion] Release 1.0.17

Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fixed using wrong eDP power sequence function pointer

[why]
dc->hwss->edp_backlight_control is null, it would casue it only be off
main-link of eDP.  It is not worng behavior for eDP power sequence off.

[how]
Must use hwseq->funcs.edp_backlight_control finction pointer for edp
backlight.

Signed-off-by: Yi-Ling Chen <Yi-Ling.Chen2@amd.com>
Reviewed-by: Sung Lee <Sung.Lee@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix calculation of virtual channel payload

[why]
The calculation of virtual channel payload would not take link settings
in account. As we calculate VCPI slots needed both PBN for stream and
also PBN per time slot.  Before we would use generic PBN per time slot,
which would not change with link settings causing wrong Payload
allocation.

[how]
Provide PBN per time slot for each Virtual channel payload calculation.

Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: [FW Promotion] Release 1.0.16

Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Use dmub fw to lock pipe, cursor, dig

[Why]
Hw lock manager adds the ability to lock pipe, cursor, and dig in fw.

[How]
Send hw lock command to fw to lock pipe, cursor, and dig.

Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm amdgpu: SI UVD enabled on Verde, Tahiti, Pitcairn

Enable asic Verde, Tahiti and Pitcairn UVD block.

Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm amdgpu: SI UVD enable for Oland

Enable Oland UVD block.

Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm amdgpu: SI UVD add uvd_v3_1 to makefile

Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm amdgpu: SI UVD context rreg/wreg

Implement SI uvd_ctx_rreg/wreg functions.

Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm amdgpu: SI UVD v3_1 (v2)

Implement SI UVD. The SI UVD firmware requires validation.

v2: squash in missing brace fix (Colin Ian King)

Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm amdgpu: SI UVD registers

Add SI UVD registers files.

Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm amdgpu: SI UVD PACKET_TYPE0

Fix packet_type0 definition in sid.

Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm amdgpu: SI UVD add firmwares

For implement UVD on SI asic, add Oland, Pitcairn, Verde, Tahiti firmwares.

Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/uvd3.x: fix register definition warnings

drop the duplicate register macros from sid.h and use the
standard ones in the oss register headers.

Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix compilation error on allmodconfig

when compiled with allmodconfig option, there are error
messages as below:

ERROR: modpost:
"mod_color_is_table_init"
[drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!
ERROR: modpost:
"mod_color_get_table"
[drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!
ERROR: modpost:
"mod_color_set_table_init_state"
[drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!

To fix the issue, this commits removes
CONFIG_DRM_AMD_DC_DCN guard in color/makefile.

Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
CC: Lewis Huang <Lewis.Huang@amd.com>
CC: Aric Cyr <Aric.Cyr@amd.com>
CC: Alexander Deucher <Alexander.Deucher@amd.com>
CC: Harry Wentland <hwentlan@amd.com>
CC: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
CC: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
CC: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix unused variable

SOC15_WAIT_ON_RREG's return value needn't always been handled by
caller. new design is to fix this kind of unused variable.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add fw release for sdma v5_0

sdma fw isn't released when module exit

Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Wenhui Sheng <Wenhui.Sheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: sdma v5_2 ring bo mem leak

invoke amdgpu_ring_fini for each sdma instance

Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Wenhui Sheng <Wenhui.Sheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove perf level dpm in one-VF

On Navi12 platform, node power_dpm_force_performance_level
doesn't work correctly in one-VF mode with at least three
smu messages not supported:
SMU_MSG_SetSoftMaxByFreq
SMU_MSG_SetSoftMinByFreq
SMU_MSG_TransferTableDram2Smu

Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Wenhui Sheng <Wenhui.Sheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add XGMI support for sienna cichlid

support for setting up XGMI FB address regions

Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: restrict the hw sched jobs number to power of two

the module parameter sched_hw_submission is probably from user mode,
and the kernel need to check whether it is legal.

1. align hw sched jobs to power of 2 and set minimum number is 2.
2. use kernel api is_power_of_2() to simplify driver code.

Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Update bounding box states (v2)

[Why]
We need to update each p-state in the bounding box

[How]
Update states when assigning values to clocks

v2: squash in patch to set min values (Alex)

Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove redundant initialization of variable ret

The variable ret is being initialized with a value that is never read
and it is being updated later with a new value.  The initialization is
redundant and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove unused functions

Remove unused amdgpu_xgmi_hive_try_lock() and smu7_reset_asic_tasks().

Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/display: properly guard the calls to swSMU functions

It's only applicable on newer asics.  We could end up here when
using DC on older asics like SI or KV.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1170
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/display bail early in dm_pp_get_static_clocks

If there are no supported callbacks.  We'll fall back to the
nominal clocks.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1170
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn2.0: fix no previous prototype for functions

Include header file vcn_v2_0.h

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn1.0: fix no previous prototype for functions

Include header file vcn_v1_0.h

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/pm: fix ref count leak when pm_runtime_get_sync fails

The call to pm_runtime_get_sync increments the counter even in case of
failure, leading to incorrect ref count.
In case of failure, decrement the ref count before returning.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/debugfs: fix ref count leak when pm_runtime_get_sync fails

The call to pm_runtime_get_sync increments the counter even in case of
failure, leading to incorrect ref count.
In case of failure, decrement the ref count before returning.

Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: label internally used symbols as static

Used sparse(make C=1) to find these loose ends.

Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/powerplay: label internally used symbols as static

Used sparse(make C=1) to find these loose ends.

Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: label internally used symbols as static

Used sparse(make C=1) to find these loose ends.

v2:
removed unwanted extra line

Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: label internally used symbols as static

Used sparse(make C=1) to find these loose ends.

v2:
removed unwanted extra line

Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/jpeg2.0: fix no previous prototype for functions

Include header file jpeg_v2_0.h.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/jpeg1.0: fix no previous prototype for functions

Include header file jpeg_v1_0.h.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: fix ref count leak when pm_runtime_get_sync fails

The call to pm_runtime_get_sync increments the counter even in case of
failure, leading to incorrect ref count.
In case of failure, decrement the ref count before returning.

Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/fence: fix ref count leak when pm_runtime_get_sync fails

The call to pm_runtime_get_sync increments the counter even in case of
failure, leading to incorrect ref count.
In case of failure, decrement the ref count before returning.

Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/debugfs: fix memory leak when amdgpu_virt_enable_access_debugfs failed

Fix memory leak in amdgpu_debugfs_gpr_read not freeing data when
amdgpu_virt_enable_access_debugfs failed.

Fixes: 95a2f917387a2 ("drm/amdgpu: restrict debugfs register access under SR-IOV")
Signed-off-by: Chen Tao <chentao107@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/debugfs: fix memory leak when pm_runtime_get_sync failed

Fix memory leak in amdgpu_debugfs_gpr_read not freeing data when
pm_runtime_get_sync failed.

Fixes: a9ffe2a983383 ("drm/amdgpu/debugfs: properly handle runtime pm")
Signed-off-by: Chen Tao <chentao107@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: vcn_v2_5_mc_resume_dpg_mode() can be static

Fixes: c422a628925d ("drm/amdgpu: rename macro for VCN2.0 2.5 and 3.0")
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix compiler warning

Fixes below warning:
drivers/gpu/drm/amd/amdgpu/df_v3_6.c: In function ‘df_v3_6_reset_perfmon_cntr’:
drivers/gpu/drm/amd/amdgpu/df_v3_6.c:571:2: warning: ‘hi_base_addr’ may be used
uninitialized in this function [-Wmaybe-uninitialized]
  571 |  df_v3_6_perfmon_wreg(adev, lo_base_addr, 0, hi_base_addr, 0);
      |  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/smu: unify smu ppt callback macros

v1: add the new macro "smu_ppt_xxx()" to unify smu callback interfaces
v2: rename the macro smu_ppt_xxx to smu_ppt_funcs.

Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/smu: unify pptable_func{} callback interface

the pptable_func callback sets should be has unify interface,
so use "smu" as the pptable_func interface first parameter.

fix interfaces:
1. i2c_eeprom_init
2. i2c_eeprom_fini

Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Update DCN3 bounding box

[Why]
We want to update the bounding box to have more granular control of the
DCFCLK.

[How]
Setup DCFCLK to use STA values and also optimal values based on
UCLK.

Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove distinction between explicit and implicit sync (v2)

According to Marek a pipeline sync should be inserted for implicit syncs well.

v2: bump the driver version

Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: Fix offset for SQ_DEBUG_STS_GLOBAL on gfx10 (v2)

Despite having different IP offsets the computed address of the register(s)
are the same between gfx7..gfx10.  This patch fixes the offset relative
to the GC block on gfx10.

(v2): SQ_DEBUG_STS_GLOBAL2 is 0x10 higher ...

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: Fix reference count leaks caused by pm_runtime_get_sync

On calling pm_runtime_get_sync() the reference count of the device
is incremented. In case of failure, decrement the
reference count before returning the error.

Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/display: fix ref count leak when pm_runtime_get_sync fails

The call to pm_runtime_get_sync increments the counter even in case of
failure, leading to incorrect ref count.
In case of failure, decrement the ref count before returning.

Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix ref count leak in amdgpu_display_crtc_set_config

in amdgpu_display_crtc_set_config, the call to pm_runtime_get_sync
increments the counter even in case of failure, leading to incorrect
ref count. In case of failure, decrement the ref count before returning.

Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix ref count leak in amdgpu_drm_ioctl

in amdgpu_drm_ioctl the call to pm_runtime_get_sync increments the
counter even in case of failure, leading to incorrect
ref count. In case of failure, decrement the ref count before returning.

Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix ref count leak in amdgpu_driver_open_kms

in amdgpu_driver_open_kms the call to pm_runtime_get_sync increments the
counter even in case of failure, leading to incorrect
ref count. In case of failure, decrement the ref count before returning.

Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: fix multiple reference count leak

On calling pm_runtime_get_sync() the reference count of the device
is incremented. In case of failure, decrement the
reference count before returning the error.

Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx9: Fix incorrect firmware size calculation

[WHY]
The memcpy() function copies n bytes from memory area src to memory area
dest. So specify the firmware size in bytes.

[How]
Correct the calculation.

Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Lei Guo <raykwok1150@163.com>
Reviewed-by: Junwei Zhang <zjunweihit@163.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix documentation around busy_percentage

Add rename the gpu busy percentage for consistency and
add the mem busy percentage documentation.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/pm: update comment to clarify Overdrive interfaces

Vega10 and previous asics use one interface, vega20 and newer
use another.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Fix reference count leaks.

kobject_init_and_add() takes reference even when it fails.
If this function returns an error, kobject_put() must be called to
properly clean up the memory associated with the object.

Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Add eviction debug messages

Use WARN to print messages with backtrace when evictions are triggered.
This can help determine the root cause of evictions and help spot driver
bugs triggering evictions unintentionally, or help with performance tuning
by avoiding conditions that cause evictions in a specific workload.

The messages are controlled by a new module parameter that can be changed
at runtime:

  echo Y > /sys/module/amdgpu/parameters/debug_evictions
  echo N > /sys/module/amdgpu/parameters/debug_evictions

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu:  Fix SQ_DEBUG_STS_GLOBAL* registers

Forgot to subtract the SOC15 IP offsetand add the BASE_IDX values.

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Get num_chans from VBIOS table

Get the values from VBIOS table

Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: add missing fill of the array`s first element

In function fill_iram_v_2, the ram_table->bright_neg_gain`s
first element [0][0] seems to be missing. This change is just
to make the code a bit readable.

Signed-off-by: Bernard Zhao <bernard@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Reconfigure ULV for gfx9 server SKUs

SDMA ULV can benefit low-power modes, but can sometimes cause
latency increases in small SDMA transfers. Server SKUs have a
different trade-off space in this domain, so this configures
the server SKUs' ULV hysteresis times differently than consumer
SKUs'.

Signed-off-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Use correct major in devcgroup check

The existing code used the major version number of the DRM driver
instead of the device major number of the DRM subsystem for
validating access for a devices cgroup.

This meant that accesses allowed by the devices cgroup weren't
permitted and certain accesses denied by the devices cgroup were
permitted (if they matched the wrong major device number).

Signed-off-by: Lorenz Brun <lorenz@brun.one>
Fixes: 6b855f7b83d2f ("drm/amdkfd: Check against device cgroup")
Reviewed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.89

Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: [FW Promotion] Release 1.0.15

[Header Changes]
- Add new initialization bits for driver to check
  firmware status
- Add command for HW locking via DMUB

Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Not doing bios data pack.

[Why]
dmub FW running abnormal after resume from S0i3 due
to data aliagnment issue.

[How]
Before having a solution for this issue, temparory
not doing data pack.

Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Sung Lee <Sung.Lee@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: not reset dmub in driver.

[Why]
during S0i3, set power state is toggled a few times,
and dmub uC will restart with current reset/hw_init.

[How]
Remove reset in set power state, and before doing hw_init,
check if dmub is enabled, and doing FW autoload check only
if dmub is already enabled.

Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Disable pipe split for modes with borders

[Why]
For some special timing with border, like DMT 640*480 72Hz,
pipe split can't handle well. Thus, it will be black screen
for these special timing.

[How]
Disable pipe split for these timing with borders as W/A.

Signed-off-by: Dale Zhao <dale.zhao@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: change global buffer to local buffer

[Why]
Multi-adapter calculate regamma table at the same time.
Two thread used the same global variable cause race
condition.

[How]
Change global buffer to local buffer

Signed-off-by: Lewis Huang <Lewis.Huang@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Improve DisplayPort monitor interop

[Why]
DC is very fast at link training and stream enablement
which causes issues such as blackscreens for non-compliant
monitors.

[How]
After debugging with scaler vendors we implement the
minimum delays at the necessary locations to ensure
the monitor does not hang.  Delays are generic due to
lack of IEEE OUI information on the failing displays.

Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Acked-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Enable use of dmub iff dmcu is disabled

[Why & How]
DMUB command table should be allowed to be used
only if dmcu is explicitly disabled.

Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: make calculate watermarks a function pointer

To allow code reuse with minimal duplication watermark
calculation needs to be function pointer.

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add helper to convert DC status

During the debugging process related to a hot-plug
problem with 4k display, we realized that we had
some issues related to the global state validation.
This problem was not explicitly highlighted in the
dmesg log, for this reason, this commit adds a function
that converts `enum dc_status` to a human-readable
string and appends the proper warning message in case
of failure.

Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add support for per-state dummy-pstate latency

[why]
Dummy pstate latency actually varies between different
UCLK frequencies, when calculating watermark C, if DAL
always assumes worst case, then it can lead to dummy
pstate not supported scenarios.

[how]
Rather than statically calculating dummy pstate using
worst case, we store the entire table of UCLK to dummy
pstate relationships.  On a per mode basis, we calculate
the actual UCLK lower limit, and use the dynamic worst
case dummy pstate latency.  This prevents the situation
where we don't support full p-state (which will force
high DPM), but still use low DPM dummy pstate latency.

Signed-off-by: Jun Lei <jun.lei@amd.com>
Reviewed-by: Joshua Aberback <Joshua.Aberback@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Revert "DP link layer test 4.2.1.1 fix due to specs update"

[why]
The change causes some regression in a common use case.
Will need more investigation before fixing the original issue.

[how]
This reverts commit fb8cf277b16d3f8b16941d217f7bae4ed7e73bea.

Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove unnecessary mpcc updates

We were updating mpcc if there were tree changes which
is unnecessary since any mpcc being added or removed
will automatically update the tree.

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: runtime select dmub emulatior.

[Why & How]
Add emul specific hw function to dmub, in case of
emulator is created, we can runtime switch between
dmub emulator or dmub uC via is_virtual flag in dmub.

Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Passing initial SDP deadline to dmub

[Why]
The SDP deadline indicate the vertical time to send CRC
infopacket in PSR.

Signed-off-by: po-tchen <po-ting.chen@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Force delay after DP receive power up

[Why]
Some sprcified monitor scalar cannot recognize timing
change on demand. Once the link phy disable and enable
during a short period then the Sink protection mechanism
could keep the screen in blank and cannot be recoverred.

[How]
To add 100ms delay between enable link phy and link training.

Signed-off-by: Martin Tsai <martin.tsai@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.88

Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: [FW Promotion] Release 1.0.14

[Header Changes]
       - Add SDP transmission deadline for PSR config cmd

Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: update audio wall clock programming

[why]
for audio on real TV issue.

[how]
-add wall clock programming for DPREF based when
Pixel clock is done by DP DTO.

Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix VBA chroma calculation for pipe splitting

[Why]
DML failures occur for 420 modes with dynamic pipe
splitting enabled because the ChromaViewport exceeds
the ChromaSurfaceWidth.

This is caused by adding the viewport_width instead
of the viewport_width_c.

This similarly occurs for rotated modes due to the
use of viewport_height instead of viewport_height_c.

[How]
Correct the calculations.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Revert "enable plane if plane_status changed"

This reverts commmit fd0293dd5b68a67a8731d54a6b334945e4e95757.

Signed-off-by: Hugo Hu <hugo.hu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove unused macro from dcn21

[Why]
SOC_BOUNDING_BOX_VALID is unused and not required for dcn21.

[How]
Remove it.

Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Use u16 for drm_bpp in DSC calculations

[Why]
DSC calculations fail because the u16 bits_per_pixel from
the DRM struct is being casted to the u8 drm_bpp parameters
and locals. Integer wraparound is happening because this
value is greater than 255.

[How]
Use u16 to match what's in the structure instead of u8.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Move call to disable DPG

[WHY]
Disabling DPG should happen after setting watermarks and clocks

Signed-off-by: Wesley Chalmers <wchalmer@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: [FW Promotion] Release 1.0.13

[Header Changes]
       - Version bump to 1.0.13

Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix incorrect dcn1 bandwidth calculations

[WHY]
Typos cause bandwidth calculation errors, one
of which can cause infinite loop on dcn1 with eDP

Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Rework dsc to isolate FPU operations

When we want to use float point operation on Linux
we need to use within special kernel protection
(`kernel_fpu_{begin,end}()`.), otherwise the kernel
can clobber userspace FPU register state. For detecting
these issues we use a tool named objtool (with -Ffa
flags) to highlight the FPU problems, all warnings can
be summed up as follows:

./tools/objtool/objtool check -Ffa
drivers/gpu/drm/amd/display/dc/dml/dml_common_defs.o

[..] dc/dsc/rc_calc.o: warning: objtool: get_qp_set()+0x2f8:
FPU instruction outside of kernel_fpu_{begin,end}()
[..] dc/dsc/rc_calc.o: warning: objtool: dsc_roundf()+0x5:
FPU instruction outside of kernel_fpu_{begin,end}()
[..] dc/dsc/rc_calc.o: warning: objtool: dsc_ceil()+0x5:
FPU instruction outside of kernel_fpu_{begin,end}()
[..] dc/dsc/rc_calc.o: warning: objtool: get_ofs_set()+0x3eb:
FPU instruction outside of kernel_fpu_{begin,end}()
[..] dc/dsc/rc_calc.o: warning: objtool: calc_rc_params()+0x3c:
FPU instruction outside of kernel_fpu_{begin,end}()
[..] dc/dsc/dc_dsc.o: warning: objtool:
get_dsc_bandwidth_range.isra.0()+0x8d:
FPU instruction outside of kernel_fpu_{begin,end}()
[..] dc/dsc/dc_dsc.o: warning: objtool: setup_dsc_config()+0x2ef:
FPU instruction outside of kernel_fpu_{begin,end}()
[..] dc/dsc/rc_calc_dpi.o: warning: objtool:copy_pps_fields()+0xbb:
FPU instruction outside of kernel_fpu_{begin,end}()
[..] dc/dsc/rc_calc_dpi.o: warning: objtool:
dscc_compute_dsc_parameters()+0x7b:
FPU instruction outside of kernel_fpu_{begin,end}()

This commit fixes the above issues by rework DSC as described:

1. Isolate all FPU operations in a single file;
2. Use FPU flags only in the file that handles FPU operations;
3. Isolate all functions that require float point operation in static
   functions;
4. Add a mid-layer function that does not use any float point operation,
   and that could be safely invoked in other parts of the code.
5. Keep float point operation under DC_FP_{START/END} macro.

CC: Christian König <christian.koenig@amd.com>
CC: Alexander Deucher <Alexander.Deucher@amd.com>
CC: Peter Zijlstra <peterz@infradead.org>
CC: Tony Cheng <tony.cheng@amd.com>
CC: Harry Wentland <hwentlan@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>