drm/xe/vm: Defer vm rebind until next exec if nothing to execute

If all compute engines of a vm in compute mode are idle,
defer a rebind to the next exec to avoid the VM unnecessarily trying
to make memory resident and compete with other VMs for available
memory space.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/tests: Test both CPU- and GPU page-table updates with the migrate test

Add a test parameter to force GPU page-table updates with the migrate
test and test both CPU- and GPU updates. Also provide some timing
results.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Use a small negative initial seqno

Causes an early 32-bit wrap and may thus help CI catch wrapping errors
that may otherwise not show early enough.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Introduce xe_engine_is_idle()

Introduce xe_engine_is_idle, and replace the static function in
xe_migrate.c.
The latter had two flaws. First the seqno == 1 test might return a false
true value each time the seqno counter wrapped, Second, the
cur_seqno == next_seqno test would never return true.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/tests: Support CPU page-table updates in the migrate test

The migrate test currently supports only GPU pagetable updates and
will thus break if we fix the CPU pagetable update selection.

Fix the migrate test first.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/migrate: Update cpu page-table updates

Don't wait for GPU to be able to update page-tables using CPU. Putting
ourselves to sleep may be more of a problem than using GPU for
page-table updates. Also allow the vm to be NULL since the migrate
kunit test uses NULL for vm.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Use a define to set initial seqno for fences

Also for HW fences, write the initial seqno - 1 to the HW completed
seqno to initialize.

v2:
- Use __dma_fence_is_later() to compare hw fence seqnos. (Matthew Auld)

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/xe_uc_fw: Use firmware files from standard locations

The GuC/HuC firmware files used by Xe drivers are the same as
used by i915. Use the already-known location to find those
firmware files, for a couple of reasons:

1. Avoid having the same firmware placed on two different
   places on MODULE_FIRMWARE(), if both 915 and xe drivers
   are compiled;

2. Having firmware files located on different locations may end
   creating bigger initramfs, as the same files will be copied
   twice my mkinitrd/dracut/...;

3. this is the place where those firmware files are located at
   https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git
   Upstream doesn't expect them to have on other places;

4. When built with display support, DMC firmware will be
   loaded from i915/ directory. It is very confusing to have
   some firmware files on a different place for the same driver.

Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Lucas de Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
[ Mostly agree with the direction of "use the firmware blobs from
  upstream at their current location for these platforms". Previous
  directory was not wrong as the plan was to have it handled in the
  upstream firmware repo. For future platforms the location can be
  changed if the support is only in xe ]
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230310081338.3275583-1-mauro.chehab@linux.intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/irq: the irq handler local variable need not be static

It's just a local variable.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Replace i915 with xe in uapi

All structs and defines had already been renamed to "xe", but some
comments with "i915" were left over. Rename them.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20230313211628.2492587-1-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Add missing LRC workarounds for graphics 1200

Synchronize LRC workarounds for graphics version 1200 with i915 up to
commit 7cdae9e9ee5e ("drm/i915: Move DG2 tuning to the right function").
These were probably missed for TGL/RKL before because in i915 it uses a
!IS_DG1() condition.  Avoid a similar issue by just checking the
graphics version 1200 since DG1 is 1210.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230314003012.2600353-14-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Add missing ADL-P engine workaround

Add the one missing workaround for ADL-P when comparing to i915 up to
commit 7cdae9e9ee5e ("drm/i915: Move DG2 tuning to the right function").

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230314003012.2600353-13-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Add missing DG2 lrc workarounds

Synchronize with i915 the DG2 lrc workarounds as of
commit 4d14d7717f19 ("drm/i915/selftest: Fix ktime_get() and h/w access
order").

A few simplifications were done when the WA should be applied to some
steps of a subplatform and all the steppings of the other subplatforms.
In this case, it was simply applied to all the steppings, which only
means applying it to a few more A* steppings.

The implementation of the workaround 16011186671 triggers a bug in the
RTP infra: it's not possible to set the flag the usual way when having
multiple actions in the entry. This may be fixed later, but for now it's
sufficient to just set the flag directly without the helper macro.

v2: Fix 14014947963 to use FIELD_SET (Matt Roper)

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230314003012.2600353-12-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Add missing DG2 lrc tunings

Synchronize with i915 the DG2 tunings as of
commit 4d14d7717f19 ("drm/i915/selftest: Fix ktime_get() and h/w access
order").

Contrary to the tuning "gang timer" for TGL, there is no quick
justification for why the read back is disabled in i915. Keep it
with that flag for now. That can be tentatively removed later when the
read values are checked.

v2: Use XEHP_FF_MODE2 instead of GEN12_FF_MODE2 (Matt Roper)

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230314003012.2600353-11-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Add missing DG2 engine workarounds

Synchronize with i915 the DG2 gt workarounds as of
commit 4d14d7717f19 ("drm/i915/selftest: Fix ktime_get() and h/w access
order").

A few simplifications were done when the WA should be applied to
some steps of a subplatform and all the steppings of the other
subplatforms. This happened with Wa_1509727124, Wa_22012856258 and a few
others. In figure the pre-production steppings will be removed, so this
can be already simplified a little bit.

v2:
  - Make 1308578152 conditional on first gslice fused off
  - Add the missing Wa_1608949956/Wa_14010198302 (Matt Roper)
v3:
  - Do not duplicate the implementation of 18019627453 since it's
    already covered by other WA numbers in graphics versions 1200 and
    1210

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230314003012.2600353-10-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Add missing DG2 gt workarounds and tunings

Synchronize with i915 the DG2 gt workarounds as of
commit 4d14d7717f19 ("drm/i915/selftest: Fix ktime_get() and h/w access
order").

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230314003012.2600353-9-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Add PVC engine workarounds

Sync PVC engine workarounds with i915.

v2: Remove 16016694945. It was added by mistake. It's a GT workaround,
already present in the GT table (Matt Roper)

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230314003012.2600353-8-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Add PVC gt workarounds

Synchronize with i915 the PVC gt workarounds as of committ
commit 4d14d7717f19 ("drm/i915/selftest: Fix ktime_get() and h/w
access order").

v2: Add masked flag to XEHPC_LNCFMISCCFGREG0 (Matt Roper)

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230314003012.2600353-7-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Reorder WAs to consider the platform

Now that number of platforms is growing, it's getting hard to know the
workarounds for each platform. Split the entries inside the same table
so the workarounds checking IP version are listed first, followed by
each platform. Next step when it grows too much is to split in smaller
tables.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230314003012.2600353-6-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/debugfs: Dump register save-restore tables

Add debugfs entry to dump the final tables with register save-restore
information.

For the workarounds, this has a format a little bit different than when the
values are applied because we don't want to read the values from the HW
when dumping via debugfs. For whitelist it just re-uses the print
function added for when the whitelist is being built.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230314003012.2600353-5-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Print whitelist while applying

Besides printing the various register save-restore, it's also useful to
know the register being allowed/denied access from unprivileged batch
buffers. Print them during device probe.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230314003012.2600353-4-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/reg_sr: Tweak verbosity for register printing

If there is no register to save-restore or whitelist, just return. This
drops some noise from the log, particurlarly for platforms with several
engines like PVC:

[drm:xe_reg_sr_apply_mmio [xe]] Applying bcs0 save-restore MMIOs
[drm:xe_reg_sr_apply_whitelist [xe]] Whitelisting bcs0 registers
[drm:xe_reg_sr_apply_mmio [xe]] Applying bcs1 save-restore MMIOs
[drm:xe_reg_sr_apply_whitelist [xe]] Whitelisting bcs1 registers
[drm:xe_reg_sr_apply_mmio [xe]] Applying bcs2 save-restore MMIOs
[drm:xe_reg_sr_apply_whitelist [xe]] Whitelisting bcs2 registers
[drm:xe_reg_sr_apply_mmio [xe]] Applying bcs5 save-restore MMIOs
[drm:xe_reg_sr_apply_whitelist [xe]] Whitelisting bcs5 registers
[drm:xe_reg_sr_apply_mmio [xe]] Applying bcs6 save-restore MMIOs
[drm:xe_reg_sr_apply_whitelist [xe]] Whitelisting bcs6 registers
[drm:xe_reg_sr_apply_mmio [xe]] Applying bcs7 save-restore MMIOs
[drm:xe_reg_sr_apply_whitelist [xe]] Whitelisting bcs7 registers
[drm:xe_reg_sr_apply_mmio [xe]] Applying bcs8 save-restore MMIOs
[drm:xe_reg_sr_apply_whitelist [xe]] Whitelisting bcs8 registers
[drm:xe_reg_sr_apply_mmio [xe]] Applying ccs0 save-restore MMIOs
[drm:xe_reg_sr_apply_mmio [xe]] REG[0x20e4] = 0x00008000
[drm:xe_reg_sr_apply_mmio [xe]] REG[0xb01c] = 0x00000001
[drm:xe_reg_sr_apply_mmio [xe]] REG[0xe48c] = 0x00000800
[drm:xe_reg_sr_apply_mmio [xe]] REG[0xe7c8] = 0x40000000
...

On a PVC system it should show something like below. Whitelist calls
are still there since they aren't actually empty - driver just doesn't
print each individual entry. This will be fixed in future.

[drm:xe_reg_sr_apply_whitelist [xe]] Whitelisting bcs0 registers
[drm:xe_reg_sr_apply_whitelist [xe]] Whitelisting bcs1 registers
[drm:xe_reg_sr_apply_whitelist [xe]] Whitelisting bcs2 registers
[drm:xe_reg_sr_apply_whitelist [xe]] Whitelisting bcs5 registers
[drm:xe_reg_sr_apply_whitelist [xe]] Whitelisting bcs6 registers
[drm:xe_reg_sr_apply_whitelist [xe]] Whitelisting bcs7 registers
[drm:xe_reg_sr_apply_whitelist [xe]] Whitelisting bcs8 registers
[drm:xe_reg_sr_apply_mmio [xe]] Applying ccs0 save-restore MMIOs
[drm:xe_reg_sr_apply_mmio [xe]] REG[0x20e4] = 0x00008000
[drm:xe_reg_sr_apply_mmio [xe]] REG[0xb01c] = 0x00000001
[drm:xe_reg_sr_apply_mmio [xe]] REG[0xe48c] = 0x00000800
[drm:xe_reg_sr_apply_mmio [xe]] REG[0xe7c8] = 0x40000000

v2: Only tweak log verbosity, leave the whitelist printout for later
    since decoding the whitelist is more complex.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230314003012.2600353-3-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/rtp: Add match helper for gslice fused off

Add match helper to detect when the first gslice is fused off, as needed
by future workarounds.

v2:
  - Add warning if called on a platform without geometry pipeline
    (Matt Roper)
  - Hardcode 4 as the number of gslices, which matches all the currently
    supported platforms. PVC doesn't have geometry pipeline and
    shouldn't use this function (Matt Roper)

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230314003012.2600353-2-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: add xe_ttm_stolen_cpu_access_needs_ggtt()

xe_ttm_stolen_cpu_inaccessible() was originally meant to just cover the
case where stolen is not directly CPU accessible on some older
integrated platforms, and as such a GGTT mapping was also required for
CPU access (as per the check in xe_bo_create_pin_map_at()).

However with small-bar systems on dgfx we have one more case where
stolen is also inaccessible, however here we don't have any fallback
GGTT mode for CPU access. Fix the check in xe_bo_create_pin_map_at() to
make this distinction clear. In such a case the later vmap() will fail
anyway.

v2: fix kernel-doc warning
v3: Simplify further and remove cpu_inaccessible()

Suggested-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: one more s/lmem/vram/

Looks to have been introduced in some very recent changes, in-between
merging the driver wide s/lmem/vram/.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Fix overflow in vram manager

The overflow caused xe_bo_restore_kernel to return an error
Fix overflow in vram manager alloc function.

Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: make compound literal initialization const

Be careful about having const in the compound literal initialization to
keep the initializers in rodata. Here, the impact is 1.8k of mutable
data moved to rodata.

add/remove: 0/1 grow/shrink: 0/0 up/down: 0/-1804 (-1804)
Data                                         old     new   delta
__compound_literal                          1804       -   -1804
Total: Before=42425, After=40621, chg -4.25%
add/remove: 0/0 grow/shrink: 1/0 up/down: 1804/0 (1804)
RO Data                                      old     new   delta
__compound_literal                          7696    9500   +1804
Total: Before=138535, After=140339, chg +1.30%

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230309121746.479146-1-jani.nikula@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/pvc: Remove A* steppings

The PVC pre-production A* steppings are not going to be supported in xe
driver - the steppings are important for the WAs and since we are not
adding the pre-productions ones, there is no need to add the stepping.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Name LRC wa after the engine it belongs

This makes it easier when printing the register-save-restore values
to know what is the engine.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Remove dump function from reg_sr

The dump function was originally added with the idea that it could be
re-used both for printing the reg-sr data and saving it to pass to GuC
via ADS. This was not used by the GuC integration, so remove it now to
give place to a new debug.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/rtp: Add match for render reset domain

This allows to create WA/tuning rules that match the first engine that
is either of compute or render class. This matters for platforms that
don't have a render engine and that may have arbitrary compute engines
fused off: some register programming need to be added to one of those
engines.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/rtp: Move match function from wa to rtp

Match functions are generally useful for other parts of the code (e.g.
xe_tuning.c). Move and rename the single one available to create a place
where similar match functions can be added.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Constify xe_dss_mask_group_ffs()

Due to how xe_dss_mask_t is implemented, the type is a pointer. Since
this is only used for looking up the bits, make it const so it can be
used together with a const gt passed around.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Allow const propagation in gt_to_xe()

Replace the inline function with a _Generic() so gt_to_xe() can work
with a const struct xe_gt*, which leads to a const struct xe *.
This allows a const gt being passed around and when the xe device is
needed, compiler won't issue a warning that calling gt_to_xe() would
discard the const. Rather, just propagate the const to the xe pointer
being returned.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/mcr: Document how to initialize group/instance

Add a sentence about the initialization so it's clear for newcomers how
to tweak the init functions for new platforms.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/mcr: Add L3BANK steering for DG2

Some register ranges with replication type L3BANK were missing from the
driver table. The following warning was triggering when adding a
workaround touching the register 0xb188:

xe 0000:03:00.0: Did not find MCR register 0xb188 in any MCR steering table

Add the L3BANK ranges according to the spec.

v2:
  - Fix typo in one of the ranges: s/0x00BCFF/0x008CFF/ (Matt Roper)
  - Add termination rule in the init function for L3BANK (Matt Roper)

Bspec: 66534
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/vm: Use the correct vma destroy sequence on userptr failure

Fix the below warning by using the correct vma destroy sequence:

[   92.204921] ------------[ cut here ]------------
[   92.204954] WARNING: CPU: 3 PID: 2449 at drivers/gpu/drm/xe/xe_vm.c:933 xe_vma_destroy+0x280/0x290 [xe]
[   92.205002] Modules linked in: ccm nft_objref cmac nf_conntrack_netbios_ns nf_conntrack_broadcast nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat ip6table_nat ip6table_mangle ip6table_raw ip6table_security iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_mangle iptable_raw iptable_security ip_set nf_tables nfnetlink ip6table_filter iptable_filter bnep sunrpc vfat fat iwlmvm mac80211 intel_rapl_msr ee1004 ppdev intel_rapl_common snd_hda_codec_realtek libarc4 iTCO_wdt snd_hda_codec_generic intel_pmc_bxt x86_pkg_temp_thermal iTCO_vendor_support intel_powerclamp coretemp intel_cstate iwlwifi btusb btrtl btbcm snd_hda_intel btintel snd_intel_dspcfg eeepc_wmi snd_hda_codec asus_wmi bluetooth snd_hwdep snd_seq ledtrig_audio snd_hda_core snd_seq_device sparse_keymap cfg80211 snd_pcm intel_uncore joydev platform_profile mei_me wmi_bmof intel_wmi_thunderbolt snd_timer pcspkr ecdh_generic i2c_i801 snd
[   92.205060]  ecc mei rfkill soundcore idma64 i2c_smbus parport_pc parport acpi_pad acpi_tad xe drm_ttm_helper ttm i2c_algo_bit drm_suballoc_helper kunit drm_buddy gpu_sched drm_display_helper drm_kms_helper drm crct10dif_pclmul crc32_pclmul crc32c_intel nvme nvme_core e1000e ghash_clmulni_intel drm_panel_orientation_quirks video wmi pinctrl_tigerlake usb_storage ip6_tables ip_tables fuse
[   92.205242] CPU: 3 PID: 2449 Comm: xe_vm Tainted: G     U             6.1.0+ #120
[   92.205254] Hardware name: ASUS System Product Name/PRIME B560M-A AC, BIOS 0403 01/26/2021
[   92.205266] RIP: 0010:xe_vma_destroy+0x280/0x290 [xe]
[   92.205299] Code: 74 15 48 8b 93 a0 01 00 00 48 8b 83 a8 01 00 00 48 89 42 08 48 89 10 4c 89 ab a0 01 00 00 4c 89 ab a8 01 00 00 e9 1b fe ff ff <0f> 0b e9 a3 fe ff ff 0f 0b e9 82 fe ff ff 66 90 0f 1f 44 00 00 48
[   92.205322] RSP: 0018:ffffaadd465c3a58 EFLAGS: 00010246
[   92.205331] RAX: 0000000000000000 RBX: ffff9706d53ed400 RCX: 0000000000000001
[   92.205341] RDX: ffff9706d53ed480 RSI: ffffffffa756dc2b RDI: ffffffffa760a05e
[   92.205351] RBP: 0000000000000000 R08: 0000000000000000 R09: 000000002c5370a2
[   92.205361] R10: ffff9706ca520000 R11: 0000000022c5370a R12: ffff9706cad03800
[   92.205370] R13: 000000000004ffff R14: fffffffffffffff2 R15: 0000000000000000
[   92.205380] FS:  00007fe98203a940(0000) GS:ffff970dffac0000(0000) knlGS:0000000000000000
[   92.205392] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   92.205400] CR2: 00007fe982ccb000 CR3: 000000010d6e6003 CR4: 0000000000770ee0
[   92.205410] PKRU: 55555554
[   92.205415] Call Trace:
[   92.205419]  <TASK>
[   92.205426]  vm_bind_ioctl_lookup_vma+0x9bb/0xbf0 [xe]
[   92.205461]  ? lock_is_held_type+0xe3/0x140
[   92.205472]  ? xe_vm_find_overlapping_vma+0x77/0x90 [xe]
[   92.205503]  ? __vm_bind_ioctl_lookup_vma.constprop.0+0x9e/0xe0 [xe]
[   92.205533]  ? __lock_acquire+0x3a3/0x1fb0
[   92.205543]  ? register_lock_class+0x38/0x480
[   92.205550]  ? __lock_acquire+0x3a3/0x1fb0
[   92.205558]  ? __lock_acquire+0x3a3/0x1fb0
[   92.205567]  ? __lock_acquire+0x3a3/0x1fb0
[   92.205579]  ? lock_acquire+0xbf/0x2b0
[   92.205586]  ? lock_acquire+0xcf/0x2b0
[   92.205597]  xe_vm_bind_ioctl+0x977/0x1c30 [xe]
[   92.205630]  ? find_held_lock+0x2b/0x80
[   92.205640]  ? lock_release+0x131/0x2c0
[   92.205648]  ? xe_vm_ttm_bo+0x40/0x40 [xe]
[   92.205677]  drm_ioctl_kernel+0xa1/0x150 [drm]
[   92.205706]  drm_ioctl+0x221/0x420 [drm]
[   92.205727]  ? xe_vm_ttm_bo+0x40/0x40 [xe]
[   92.205764]  __x64_sys_ioctl+0x8d/0xd0
[   92.205774]  do_syscall_64+0x37/0x90
[   92.205781]  entry_SYSCALL_64_after_hwframe+0x63/0xcd
[   92.205790] RIP: 0033:0x7fe982be8d6f
[   92.205797] Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <89> c2 3d 00 f0 ff ff 77 18 48 8b 44 24 18 64 48 2b 04 25 28 00 00
[   92.205821] RSP: 002b:00007ffde9f9c560 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[   92.205832] RAX: ffffffffffffffda RBX: 00007fadeadbe000 RCX: 00007fe982be8d6f
[   92.205842] RDX: 00007ffde9f9c5f0 RSI: 0000000040786445 RDI: 0000000000000003
[   92.205851] RBP: 00007ffde9f9c5f0 R08: 00007fadeadbe000 R09: 0000000000040000
[   92.205861] R10: 0000000000000003 R11: 0000000000000246 R12: 0000000040786445
[   92.205871] R13: 0000000000000003 R14: 0000000000000003 R15: 00007fe982e02000
[   92.205888]  </TASK>
[   92.205892] irq event stamp: 82723
[   92.205897] hardirqs last  enabled at (82731): [<ffffffffa617660e>] __up_console_sem+0x5e/0x70
[   92.205910] hardirqs last disabled at (82738): [<ffffffffa61765f3>] __up_console_sem+0x43/0x70
[   92.205922] softirqs last  enabled at (82182): [<ffffffffa60f026d>] __irq_exit_rcu+0xed/0x160
[   92.205935] softirqs last disabled at (82163): [<ffffffffa60f026d>] __irq_exit_rcu+0xed/0x160
[   92.205947] ---[ end trace 0000000000000000 ]---

Reported-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Add support for CCS engine fusing

For Xe_HP platforms that can have multiple CCS engines, the
presence/absence of each CCS is inferred by the presence/absence of any
DSS in the corresponding quadrant of the GT's DSS mask.

This handling is only needed on platforms that can have more than one
CCS.  The CCS is never fused off on platforms like MTL that can only
have one.

v2:
 - Add extra warnings to try to catch mistakes where the register counts
   in get_num_dss_regs() are updated without corresponding updates to
   the register parameters passed to load_dss_mask().  (Lucas)
 - Add kerneldoc for xe_gt_topology_has_dss_in_quadrant() and clarify
   why we care about quadrants of the DSS space.  (Lucas)
 - Ensure CCS engine counting treats engine mask as 64-bit.  (Lucas)

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230309005530.3140173-2-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Separate engine fuse handling into dedicated functions

The single function to handle fuse registers for all types of engines is
becoming a bit long and hard to follow (and we haven't even added the
compute engines yet).  Let's split it into dedicated functions for each
engine class.

v2:
 - Add note about BCS0 always being present.  (Bala)
 - Add forcewake assertion to read_copy_fuses.  (Bala)

Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230309005530.3140173-1-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: s/lmem/vram/

This seems to be the preferred nomenclature in xe. Currently we are
intermixing vram and lmem, which is confusing.

v2 (Gwan-gyeong Mun & Lucas):
  - Rather apply to the entire driver

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/guc: Handle regset overflow check for entire GT

Checking whether a single engine's register save/restore entries
overflow the expected/pre-allocated GuC ADS regset area isn't terribly
useful; we actually want to check whether the combined entries from all
engines on the GT overflow the regset space.

Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230308005509.2975663-1-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/stolen: Exclude reserved lmem portion

The address set by firmware in GEN12_DSMBASE in driver initialization
doesn't mean "anything above that and until end of lmem is part of DSM".
In fact, there may be a few KB that is not part of DSM on the end of
lmem. How large is that space is platform-dependent, but since it's
always less than the DSM granularity, it can be simplified by simply
aligning the size down.

Suggested-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/migrate: Fix number of PT structs in docbook

Update xe_migrate_doc.h with 32 page table structs (not 48)

v2: minor typo fix

Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230306133459.7803-1-niranjana.vishwanathapura@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/tests: Grab a memory access reference around the migrate sanity test

It appears we don't hold a memory access reference for the accesses in
this test, which may results in printed warnings and possibly the GT
not woken up for the memory accesses.

Add a memory access reference around the test.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/tests: Remove CONFIG_FB dependency

We currently don't have any tests that explicitly depends on this
config option, so remove that build dependency.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Fix ROW_CHICKEN2 define

When this register was added in xe for some workarounds, it was copied
from i915 before the registers got changed to add the MCR annotation.
The register 0xe4f4 is MCR since gen8, long before any GPU supported by
the xe driver. Replace all occurrences with the right register.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230306165757.633796-1-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Fix duplicated setting for register 0x6604

The following warning shows up for TGL:

[drm:xe_reg_sr_add [xe]] *ERROR* Discarding save-restore reg 6604 (clear: 00ff0000, set: 00040000, masked: no): ret=-22
[drm:xe_reg_sr_add [xe]] *ERROR* Discarding save-restore reg 6604 (clear: 00ff0000, set: 00040000, masked: no): ret=-22

That is because the same register is being set both by the WAs and the
tunings. Like was done in i915, prefer the tuning over the workaround
since that is applicable for more platforms. Also fix the tuning: it
was incorrectly using the MCR version of the register, but that only
became true in XEHP.

References: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/233
Reported-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20230306212450.803557-1-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Fix size of xe_eu_mask_t

XE_MAX_DSS_FUSE_REGS was being used to calculate the size of
xe_eu_mask_t while it should use XE_MAX_EU_FUSE_REGS.
There are no know issues about this but fixing it anyways.

Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Fix typo persitent->persistent

Fix typo as noticed by Matt Roper:

git grep -l persitent | xargs sed -i 's/persitent/persistent/g'

... and then fix coding style issues.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/20230302013411.3262608-2-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/device: Prefer the drm-managed mutex_init

There's inconsistent use of mutex_init(), in xe_device_create(), with
several of them never calling mutex_destroy() in xe_device_destroy().
Migrate all of them to drmm_mutex_init(), so the destroy part is
automatically called.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230225002138.1759016-2-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/bo: explicitly reject zero sized BO

In the depths of ttm, when allocating the vma node this should result in
-ENOSPC it seems. However we should probably rather reject as part of
our own ioctl sanity checking, and then treat as programmer error in the
lower levels.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: prefer xe_bo_create_pin_map()

With small-bar we likely want to annotate all the kernel users that
require CPU access with vram. If xe_bo_create_pin_map() is the central
place for that then we should have a central place to annotate.

This also simplifies the code and fixes what appears to be a double
xe_bo_put(hwe->hwsp) in the error handling.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/mocs: Drop HAS_RENDER_L3CC flag

The HAS_RENDER_L3CC is set unconditionally so there's no need to keep it
as a dedicated flag.  For error checking purposes, we can just make sure
the 'table' field is initialized properly.

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Suggested-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/mocs: LNCF MOCS settings only need to be restored on pre-Xe_HP

Reprogramming the LNCF MOCS registers on render domain reset is not
intended to be regular driver programming, but rather the implementation
of a specific workaround (Wa_1607983814).  This workaround no longer
applies on Xe_HP any beyond, so we can expect that these registers, like
the rest of the LNCF/LBCF registers, will maintain their values through
all engine resets.  We should only add these registers to the GuC's
save/restore list on platforms that need the workaround.

Furthermore, xe_mocs_init_engine() appears to be another attempt to
satisfy this same workaround.  This is unnecessary on the Xe driver
since even on platforms where the workaround is necessary, all
single-engine resets are initiated by the GuC and thus the GuC will take
care of saving/restoring these registers.  The only host-initiated
resets we have in Xe are full GT resets which will already
(re)initialize these registers as part of the regular xe_mocs_init()
flow.

v2:
 - Add needs_wa_1607983814() so that calculate_regset_size() doesn't
   overallocate regset space when the workaround isn't needed.  (Lucas)
 - On platforms affected by Wa_1607983814, only add the LNCF MOCS
   registers to the render engine's GuC save/restore list; resets of
   other engines don't need to save/restore these.

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/mocs: add MTL mocs

It was incorrectly using dg2_mocs for now.

v2 (MattR):
 - Use REG_GENMASK/REG_FIELD_PREP for bitfields
 - Add bspec references

Bspec: 45101, 45410, 63882
Signed-off-by: Philippe Lecluse <philippe.lecluse@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/mocs: Drop duplicate assignment of uc_index

The DG1 branch needlessly assigns uc_index twice.  Drop the second
instance.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/mocs: Drop xe_mocs_info_index

The values in the xe_mocs_info_index enum only match old pre-gen12
hardware not supported by the Xe driver.

The only usage of this enum was to set a default value for
info->unused_entries_index, but this is unnecessary since every platform
in the subsequent switch statement sets a proper platform-specific value
(and the XE_MOCS_PTE default doesn't even make sense since the hardware
dropped the "use PAT settings" capability in gen12).

v2:
 - Add a check that unusued_entries_index is non-zero; even for
   platforms where this is a valid table entry, it's never the one we
   want this value assigned to.  (Lucas)

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/mocs: Add missing RKL handling

RKL should use the same "gen12" MOCS handling as TGL/ADL-S/ADL-P.

Bspec: 45101
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/mocs: Drop unwanted TGL table

TGL/RKL/ADLS/ADLP are all supposed to use the same MOCS table, with
values defined in the bspec.  Any entries listed in the bspec as
reserved/error/undefined should always be initialized to the most cached
and least coherent setting possible so that any userspace accidentally
referencing those undefined entries will only experience an increase in
coherency if spec updates down the road start defining real values.

The TGL and gen12 table entries defined in the driver today are
identical except that the TGL includes one additional (incorrect)
setting for table index 1.  Furthermore, the TGL-specific initialization
does not define a dedicated value for info->unused_entries_index, so
this incorrect table entry 1 also gets used to populate the MOCS
registers for all reserved/unused table entries.  This incorrect
behavior is a holdover from i915 where the platform was enabled with an
incorrect setting and by the time we noticed, it was too late to fix the
table without breaking ABI compatibility (and on TGL we did indeed have
some buggy userspace that was referencing the 'reserved' entry 1).
Since the Xe driver starts fresh with a clean slate on ABI, there's no
need to repeat the mistakes of i915 here.

v2:
 - Reword/clarify commit message.  (Lucas)

Bspec: 45101
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Do not spread i915_reg_defs.h include

Reduce the use of i915_reg_defs.h so it can be encapsulated in a single
place.

1) If it was being included by mistake, remove
2) If it was included for FIELD_GET()/FIELD_PREP()/GENMASK() and the
   like, just include <linux/bitfield.h>
3) If it was included to be able to define additional registers, move
   the registers to the relavant headers (regs/xe_regs.h or
   regs/xe_gt_regs.h)

v2:
  - Squash commit fixing i915_reg_defs.h include and with the one
    introducing regs/xe_reg_defs.h
  - Remove more cases of i915_reg_defs.h being used when all it was
    needed was linux/bitfield.h  (Matt Roper)
  - Move some  registers to the corresponding regs/*.h file (Matt Roper)

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Rodrigo squashed here the removal of the i915 include]

drm/xe: Prefer single underscore for header guards

Keep header guards consistent with regard to ifdef used. Prefer the more
commonly used in the driver.

$ git grep  "ifndef __XE_" -- drivers/gpu/drm/xe | wc -l
8
$ git grep  "ifndef _XE_" -- drivers/gpu/drm/xe | wc -l
112

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Remove dependency on intel_mchbar_regs.h

The only thing really needed is the base offset, MCHBAR_MIRROR_BASE_SNB.
Remove the include and just define it inplace.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/guc_pc: Move gt register to the proper place

Move a few defines from xe_guc_pc.c to the right register, now that
there is one: xe_gt_regs.h.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Remove dependency on i915_reg.h

Copy the macros used by xe in i915_reg.h to regs/xe_regs.h. A minimal
cleanup is done while copying so they adhere minimally to the coding
style.  Further reordering and cleaning is left for later.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Remove dependency on intel_gpu_commands.h

Copy the macros used by xe in intel_gpu_commands.h to
regs/xe_gpu_commands.h. PIPE_CONTROL_3D_ENGINE_FLAGS and
PIPE_CONTROL_3D_ARCH_FLAGS were already defined in
drivers/gpu/drm/xe/xe_ring_ops.c and only used there. So let that define
to be used instead of also adding to the new header.

v2: Let PIPE_CONTROL_3D_ENGINE_FLAGS/PIPE_CONTROL_3D_ARCH_FLAGS in the
    only .c that uses it instead of redefining (Matt Roper)

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Remove dependency on intel_lrc_reg.h

Create regs/xe_lrc_layout.h file with all the offsets used by the xe
driver. Eventually the xe driver may use a different way to define them
since it doesn't supported below gen12.

v2: Rename file to intel_lrc_layout.h since it's not really about
    registers (Matt Roper)

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Remove dependency on intel_gt_regs.h

Create regs/xe_gt_regs.h file with all the registers and bit
definitions used by the xe driver. Eventually the registers may be
defined in a different way and since xe doesn't supported below gen12,
the number of registers touched is much smaller, so create a new header.

The definitions themselves are direct copy from the
gt/intel_gt_regs.h file, just sorting the registers by address.
Cleaning those up and adhering to a common coding style is left for
later.

v2: Make the change to MCR_REG location in a separate patch to go
    through the i915 branch  (Matt Roper / Rodrigo)

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Remove dependency on intel_engine_regs.h

Create regs/xe_engine_regs.h file with all the registers and bit
definitions used by the xe driver. Eventually the registers may be
defined in a different way and since xe doesn't supported below gen12,
the number of registers touched is much smaller, so create a new header.

The definitions themselves are direct copy from the
gt/intel_engine_regs.h file, just sorting the registers by address.
Cleaning those up and adhering to a common coding style is left for
later.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Sort includes

Sort includes and split them in blocks:

1) .h corresponding to the .c. Example: xe_bb.c should have a "#include
   "xe_bb.h" first.
2) #include <linux/...>
3) #include <drm/...>
4) local includes
5) i915 includes

This is accomplished by running
`clang-format --style=file -i --sort-includes drivers/gpu/drm/xe/*.[ch]`
and ignoring all the changes after the includes. There are also some
manual tweaks to split the blocks.

v2: Also sort includes in headers

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Assume MTL's forcewake register continues to future platforms

Starting with MTL, the GT forcewake ack register moved from 0x130044 to
0xDFC.  We expect this change to carry forward to future platforms as
well, so forcewake initialization should use an IP version check instead
of matching the MTL platform specifically.

The (re)definition of FORCEWAKE_ACK_GT_MTL in the forcewake file is also
unnecessary; we can take the definition that already exists in the
dedicated register header.

Bspec: 65031, 64629
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Remove gen-based mmio offsets from hw engine init

During early generations of Intel GPUs, hardware engines would sometimes
move to new MMIO offsets from one platform/generation to the next.
These days engines the hardware teams put more effort into ensuring that
engines stay at consistent locations; even major design changes (like
the introduction of standalone media) keep the MMIO locations of the
engines constant.

Since all platforms supported by the Xe driver are new enough to have a
single MMIO offset for each engine (and since our crystal ball says that
these offsets are very unlikely to change again in the foreseeable
future), we can simplify the driver's engine definitions and remove the
gen-based MMIO bases.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Fix kunit integration due to missing prototypes

In order to avoid  -Werror=missing-prototypes, add the prototypes
in a separate tests/<test-name>_test.h file that is included by both
the implementation (tests/xe_<testname>.c, injected in xe.ko) and the
kunit module (tests/xe_<testname>_test.c -> xe-<testname>-test.ko).

v2: Add header and don't add ifdef to files that are already not built
when not using kunit (Matt Auld)

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/pm: fix unbalanced ref handling

In local_pci_probe() the core kernel increments the rpm for the device,
just before calling into the probe hook. If the driver/device supports
runtime pm it is then meant to put this ref during probe (like we do in
xe_pm_runtime_init()). However when removing the device we then also
need to take the reference back, otherwise the ref that is put in
pci_device_remove() will be unbalanced when for example unloading the
driver, leading to warnings like:

    [ 3808.596345] xe 0000:03:00.0: Runtime PM usage count underflow!

Fix this by incrementing the rpm ref when removing the device.

v2:
  - Improve the terminology in the commit message; s/drop/put/ etc (Lucas & Rodrigo)
  - Also call pm_runtime_forbid(dev) (Rodrigo)

Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/193
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/guc: Remove i915_regs.h include

i915_regs.h is not needed, particularly in a header file. What is needed
is i915_reg_defs.h for use of _MMIO() and similar macros.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Remove outdated build workaround

Use the more common "call cc-disable-warning" way to disable warnings.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Remove duplicate media_ver

media_verx100 supersedes the info from media_ver. Leave media_ver in the
struct xe_device_desc, used in xe_pci.c since it's easier to define
common parts of the platforms like that. However all the rest of the
driver should be using media_verx100 that is more future proof.

Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/216
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Add missing include xe_wait_user_fence.h

Make xe_wait_user_fence.c include xe_wait_user_fence.h so it doesn't
rely on indirect includes and also doesn't fail the build due to missing
prototype for xe_wait_user_fence_ioctl().

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Add missing doc for xe parameter

Fix the following warning:

../drivers/gpu/drm/xe/xe_ttm_stolen_mgr.c:55: warning: Function
parameter or member 'xe' not described in
'xe_ttm_stolen_cpu_inaccessible'

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Remove unused functions

xe_gt_topology_dss_group_mask and xe_gt_topology_count_dss are probably
leftover from initial implementation - they are not called from
anywhere. Remove those functions.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Fix application of LRC tunings

LRC tunings were added after the gt ones and didn't add the call
in xe_gt_record_default_lrcs() to process them like is done for
workarounds. Add such a function and call it from
xe_gt_record_default_lrcs().

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Make local functions static

A few static functions not being declared like that break the build with
W=1, like e.g.

cc1: all warnings being treated as errors
make[2]: *** [../scripts/Makefile.build:250: drivers/gpu/drm/xe/xe_gt.o] Error 1
../drivers/gpu/drm/xe/xe_guc.c:240:6: error: no previous prototype for ‘guc_write_params’ [-Werror=missing-prototypes]
  240 | void guc_write_params(struct xe_guc *guc)
      |      ^~~~~~~~~~~~~~~~

Make them static.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/query: zero the region info

There are also some reserved fields in here which are not currently
cleared when handing back to userspace. Otherwise we might run into
issues if we later wish to use them.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Lucas De Marchi lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/stolen: don't map stolen on small-bar

The driver should still be functional with small-bar, just that the vram
size is clamped to the BAR size (until we add proper support for tiered
vram). For stolen vram we shouldn't iomap anything if the BAR size
doesn't also contain the stolen portion, since on discrete the stolen
portion is always at the end of normal vram. Stolen should still be
functional, just that allocating CPU visible io memory will always
return an error.

v2 (Lucas)
  - Mention in the commit message that stolen vram is always as the end
    of normal vram, which is why stolen in not mappable on small-bar
    systems.
  - Just make xe_ttm_stolen_inaccessible() return true for such cases.
    Also rename to xe_ttm_stolen_cpu_inaccessible to better describe
    that we are talking about direct CPU access. Plus add some
    kernel-doc.

Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/209
Reported-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/mmio: fix forcewake ref leak in xe_mmio_ioctl

Make sure we properly release the forcewake ref on all error paths.

v2(Lucas):
  - Make it less verbose and just fold the unimplemented options into
    the default. The exact return value doesn't seem to matter for the
    corresponding IGT.
  - Replace the user triggerable WARN() with drm_dbg().

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Remove unseless xe_force_wake_prune.

(!(gt->info.engine_mask & BIT(i))) cases are already
handled in the init function. And these masks are not
modified between the init and the prune.

Suggested-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>

drm/xe: Update the list of devices to add even more TGL devices

The list of GTs got splitted a while back between GT1
and GT2 on TGL.

References: https://patchwork.freedesktop.org/patch/388414/
CC: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Carlos Santa <carlos.santa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Initialize ret in mcr_lock()

ret is not initialized in mcr_lock() when running in platforms with
graphics IP version < 1270, this could cause drm_WARN_ON_ONCE()
to hit eventually(what just happened to me).

Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/rtp: Support multiple actions per entry

Just like there is support for multiple rules per entry in an rtp table,
also support multiple actions. This makes it easier to add support for
workarounds that need to change multiple registers. It also makes it
slightly more readable as now the action part resembles the rule part.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/rtp: Split action and entry flags

Entry flags is meant for the whole entry, including the rule
evaluation. Action flags are for flags applied to the register or
action being taken. Since there's only one action per entry, the
distinction was not important and a u8 was spared. However more and more
workarounds are needing multiple actions. This prepares for multiple
action support.

Right now there are these action flags:

 - XE_RTP_ACTION_FLAG_MASKED_REG: register in the action is a masked
   register
 - XE_RTP_ACTION_FLAG_ENGINE_BASE: the engine base should be added to
   the register in order to form the real address

And this entry flag:

 - XE_RTP_ENTRY_FLAG_FOREACH_ENGINE: the rules should be evaluated for
   each engine on the gt. It also automatically implies
   XE_RTP_ACTION_FLAG_ENGINE_BASE.

Since there are likely not that many rules, reduce n_rules to u8 so the
overall entry size doesn't increase more than needed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Rename xe_rtp_regval to xe_rtp_action

It's true that the struct records the register and the value (in form of
2 masks) to restore, but it also records more fields important to
the application of workarounds/tuning, etc. One important part is what
is the macro used to record these fields: SET/CLR/WR/FIELD_SET/etc.

Thinking of the table as a set of rules + actions is more intuitive than
rules + regval.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/mcr: Add SQIDI steering for DG2

Like detailed in commit 927dfdd09d8c ("drm/i915/dg2: Add SQIDI
steering"), some registers are expected to have the selector
initialized just once and never set to anything else. For xe, the
registers with SQIDI replication type (SF and MCFG) were missing,
resulting in warnings like:

[  410.685565] xe 0000:03:00.0: Did not find MCR register 0x8724 in any MCR steering table

While adding these registers, abstract the handling for
"dg2_gam_ranges", moving them together with SF/MCFG to a dedicated
table. This also avoids that range to be checked for platforms other
than DG2. For DG2, this is the new steering output:

# cat /sys/kernel/debug/dri/0/gt0/steering
...
IMPLICIT steering: group=0x0, instance=0x0
0x000b00 - 0x000bff
0x001000 - 0x001fff
0x004000 - 0x004aff
0x008700 - 0x0087ff
0x00c800 - 0x00cfff
0x00f000 - 0x00ffff

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/mcr: Use designated init for xe_steering_types

There is already a BUILD_BUG_ON() check to make sure the size follow the
number of steering types. Also make sure the right index is being used
for each steering type.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Remove TODO from workaround documentation

LRC workarounds are already implemented: remove leftover TODO.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Remove TODO from rtp infra

The function pointer is already present as match_func, inside
struct xe_rtp_rule and handled as so instead of inside rtp_regval as
originally thought out when this was written.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Fix xe_tuning include

xe_tuning.c should include xe_tuning.h, not xe_wa.h

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Fix typo in MCR documentation

Add missing "multicast" word and adapt/wrap the rest of the sentence.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Add debugfs for dumping GGTT mappings

Adding a debugfs dump of GGTT was useful for some debugging I did,
and easy to add. Might be useful for others too.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Drop TLB invalidation from ring operations

Now that we issue TLB invalidations on unbinds and rebind from execs we
no longer need to issue TLB invalidations from the ring operations.

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>

drm/xe: Add TLB invalidation fence after rebinds issued from execs

If we add an TLB invalidation fence for rebinds issued from execs we
should be able to drop the TLB invalidation from the ring operations.

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>

drm/xe: Add has_asid to device info

Rather than alias supports_usm to ASIS support, add an explicit
variable to indicate ASID support.

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>