drm/amdgpu/UAPI: add new CTX OP to get/set stable pstates

Add a new CTX ioctl operation to set stable pstates for profiling.
When creating traces for tools like RGP or using SPM or doing
performance profiling, it's required to enable a special
stable profiling power state on the GPU.  These profiling
states set fixed clocks and disable certain other power
features like powergating which may impact the results.

Historically, these profiling pstates were enabled via sysfs,
but this adds an interface to enable it via the CTX ioctl
from the application.  Since the power state is global
only one application can set it at a time, so if multiple
applications try and use it only the first will get it,
the ioctl will return -EBUSY for others.  The sysfs interface
will override whatever has been set by this interface.

Mesa MR: https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/207

v2: don't default r = 0;
v3: rebase on Evan's PM cleanup

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/swsmu/i2c: return an error if the SMU is not running

Return an error if someone tries to use the i2c bus when the
SMU is not running.  Otherwise we can end up sending commands
to the SMU which will either get ignored or could cause other
issues depending on what state the GPU and SMU are in.

Cc: Luben.Tuikov@amd.com
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: Enable FRU EEPROM for Sienna Cichlid

Enable the FRU EEPROM I2C bus for Sienna Cichlid
server boards, for which it is enabled by checking
the VBIOS version.

Cc: Roy Sun <Roy.Sun@amd.com>
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: Expose the FRU SMU I2C bus

Expose both SMU I2C buses. Some boards use the same bus for both the RAS
and FRU EEPROMs and others use different buses.  This enables the
additional I2C bus and sets the right buses to use for RAS and FRU EEPROM
access.

Cc: Roy Sun <Roy.Sun@amd.com>
Co-developed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add 1.3.1/2.4.0 athub CG support

This patch adds 1.3.1/2.4.0 athub clock gating support.

Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: convert code name to ip version for athub

Use IP version rather than codename for athub.

Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix unused variable warning

[Why]
It will build failed with unused variable 'dc' with
'-Werror=unused-variable'enabled when CONFIG_DRM_AMD_DC_DCN
is not defined.

Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: get hash bit for CH4 in umc channel index

On ALDEBARAN, the umc channel bits are not original values, they
are hashed.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: update algorithm of umc address conversion

On ALDEBARAN, we need to traverse all column bits higher than
BIT11(C4C3C2) in a row, the shift of R14 bit should be also taken
into account. Retire all pages we find.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: increase bad page number for umc ras query

One piece of umc normalizing address can be mapped to 16 pieces of
physical address in each umc channel on ALDEBARAN.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add umc_fill_error_record to make code more simple

Create common amdgpu_umc_fill_error_record function for all versions
of UMC and clean up related codes.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

display/amd: decrease message verbosity about watermarks table failure

A number of BIOS versions have a problem with the watermarks table not
being configured properly.  This manifests as a very scary looking warning
during resume from s0i3.  This should be harmless in most cases and is well
understood, so decrease the assertion to a clearer warning about the problem.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Wipe all VRAM on free when RAS is enabled

On GPUs with RAS, poison can propagate between processes if VRAM is not
cleared when it is freed or allocated. The reason is, that not all write
accesses clear RAS poison. 32-byte writes by the SDMA engine do clear RAS
poison. Clearing memory in the background when it is freed should avoid
major performance impact. KFD has been doing this already for a long time.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix an error message in rmmod

[why]
In rmmod procedure, kfd sends cp a dequeue request, but the
request does not get response, then an error message "cp
queue pipe 4 queue 0 preemption failed" printed.

[how]
Performing kfd suspending after disabling gfxoff can fix it.

Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Tianci.Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: fix the deadlock observed on performance_level setting

The sub-routine(amdgpu_gfx_off_ctrl) tried to obtain the lock
adev->pm.mutex which was actually hold by amdgpu_dpm_force_performance_level.
A deadlock happened then.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: correct the MGpuFanBoost support for Beige Goby

The existing way cannot handle Beige Goby well as a different
PPTable data structure(PPTable_beige_goby_t instead of PPTable_t)
is used there.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add Missing HPO Stream Encoder Function Hook

[Why]
configure_dp_hpo_throttled_vcp_size() was missing promotion before, but it was covered by
not calling the missing function hook in the old interface hpo_dp_link_encoder->funcs.

Recent refactor replaces with new caller link_hwss->set_throttled_vcp_size
which needs that hook, and that causes null ptr hang.

Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: svm range restore work deadlock when process exit

kfd_process_notifier_release flush svm_range_restore_work
which calls svm_range_list_lock_and_flush_work to flush deferred_list
work, but if deferred_list work mmput release the last user, it will
call exit_mmap -> notifier_release, it is deadlock with below backtrace.

Move flush svm_range_restore_work to kfd_process_wq_release to avoid
deadlock. Then svm_range_restore_work take task->mm ref to avoid mm is
gone while validating and mapping ranges to GPU.

Workqueue: events svm_range_deferred_list_work [amdgpu]
Call Trace:
 wait_for_completion+0x94/0x100
 __flush_work+0x12a/0x1e0
 __cancel_work_timer+0x10e/0x190
 cancel_delayed_work_sync+0x13/0x20
 kfd_process_notifier_release+0x98/0x2a0 [amdgpu]
 __mmu_notifier_release+0x74/0x1f0
 exit_mmap+0x170/0x200
 mmput+0x5d/0x130
 svm_range_deferred_list_work+0x104/0x230 [amdgpu]
 process_one_work+0x220/0x3c0

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reported-by: Ruili Ji <ruili.ji@amd.com>
Tested-by: Ruili Ji <ruili.ji@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Ensure mm remain valid in svm deferred_list work

svm_deferred_list work should continue to handle deferred_range_list
which maybe split to child range to avoid child range leak, and remove
ranges mmu interval notifier to avoid mm mm_count leak. So taking mm
reference when adding range to deferred list, to ensure mm is valid in
the scheduled deferred_list_work, and drop the mm referrence after range
is handled.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reported-by: Ruili Ji <ruili.ji@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Don't take process mutex for svm ioctls

SVM ioctls take proper svms->lock to handle race conditions, don't need
take process mutex to serialize ioctls. This also fixes circular locking
warning:

WARNING: possible circular locking dependency detected

  Possible unsafe locking scenario:

        CPU0                    CPU1
        ----                    ----
   lock((work_completion)(&svms->deferred_list_work));
                                lock(&process->mutex);
                     lock((work_completion)(&svms->deferred_list_work));
   lock(&process->mutex);

   *** DEADLOCK ***

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/display: Remove t_srx_delay_us.

Unused. Convert the divisions into asserts on the divisor, to
debug why it is zero. The divide by zero is suspected of causing
kernel panics.

While I have no idea where the zero is coming from I think this
patch is a positive either way.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: enable heavy-weight TLB flush on Vega20

It is to meet the requirement for memory allocation
optimization on MI50.

Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add determine passthrough under arm64

add determine for passthrough mode under arm64 by reading
CurrentEL register

v2: squash in warning fix (Alex)

Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: convert to DCE IP version checking

Use IP versions rather than asic_type to differentiate IP version specific features.

Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: convert to UVD IP version checking

Use IP versions rather than asic_type to differentiate IP version specific features.

Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: convert to NBIO IP version checking

Use IP versions rather than asic_type to differentiate IP version specific features.

Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: don't use /** for non-kernel-doc comments

Change a static function's comment from "/**" (indicating kernel-doc
notation) to "/*" (indicating a regular C language comment).
This prevents multiple kernel-doc warnings:

  drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c:4343: warning: Function parameter or member 'max_supported_frl_bw_in_kbps' not described in 'intersect_frl_link_bw_support'
  drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c:4343: warning: Function parameter or member 'hdmi_encoded_link_bw' not described in 'intersect_frl_link_bw_support'
  drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c:4343: warning: expecting prototype for Return PCON's post FRL link training supported BW if its non(). Prototype was for intersect_frl_link_bw_support() instead

Fixes: c022375ae095 ("drm/amd/display: Add DP-HDMI FRL PCON Support in DC")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Fangzhi Zuo <Jerry.Zuo@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: remove redundant assignment to reg

The pointer reg is being assigned a value that is not read, the
exit path via label 'out' never accesses it. The assignment is
redundant and can be removed.

Cleans up clang scan build warning:
drivers/gpu/drm/radeon/radeon_object.c:570:3: warning: Value
stored to 'reg' is never read [deadcode.DeadStores]

Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: return -ENOTSUPP if there is no get_dpm_ultimate_freq function

clang static analysis reports this represenative problem
amdgpu_smu.c:144:18: warning: The left operand of '*' is a garbage value
        return clk_freq * 100;
               ~~~~~~~~ ^

If there is no get_dpm_ultimate_freq function,
smu_get_dpm_freq_range returns success without setting the
output min,max parameters.  So return an -ENOTSUPP error.

Fixes: e5ef784b1e17 ("drm/amd/powerplay: revise calling chain on retrieving frequency range")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Wrap dcn301_calculate_wm_and_dlg for FPU.

Mirrors the logic for dcn30. Cue lots of WARNs and some
kernel panics without this fix.

Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix FP start/end for dcn30_internal_validate_bw.

It calls populate_dml_pipes which uses doubles to initialize the
scale_ratio_depth params. Mirrors the dcn20 logic.

Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix a NULL pointer dereference in amdgpu_dm_connector_add_common_modes()

In amdgpu_dm_connector_add_common_modes(), amdgpu_dm_create_common_mode()
is assigned to mode and is passed to drm_mode_probed_add() directly after
that. drm_mode_probed_add() passes &mode->head to list_add_tail(), and
there is a dereference of it in list_add_tail() without recoveries, which
could lead to NULL pointer dereference on failure of
amdgpu_dm_create_common_mode().

Fix this by adding a NULL check of mode.

This bug was found by a static analyzer.

Builds with 'make allyesconfig' show no new warnings,
and our static analyzer no longer warns about this code.

Fixes: e7b07ceef2a6 ("drm/amd/display: Merge amdgpu_dm_types and amdgpu_dm")
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display/dc/calcs/dce_calcs: Fix a memleak in calculate_bandwidth()

In calculate_bandwidth(), the tag free_sclk and free_yclk are reversed,
which could lead to a memory leak of yclk.

Fix this bug by changing the location of free_sclk and free_yclk.

This bug was found by a static analyzer.

Builds with 'make allyesconfig' show no new warnings,
and our static analyzer no longer warns about this code.

Fixes: 2be8989d0fc2 ("drm/amd/display/dc/calcs/dce_calcs: Move some large variables from the stack to the heap")
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: convert amdgpu_display_supported_domains() to IP versions

Check IP versions rather than asic types.

Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: handle BACO synchronization with secondary funcs

Extend secondary function handling for runtime pm beyond audio
to USB and UCSI.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: move runtime pm init after drm and fbdev init

Seems more logical to enable runtime pm at the end of
the init sequence so we don't end up entering runtime
suspend before init is finished.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: move PX checking into amdgpu_device_ip_early_init

We need to set the APU flag from IP discovery before
we evaluate this code.

Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: set APU flag based on IP discovery table

Use the IP versions to set the APU flag when necessary.

Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/pm/smu7: drop message about VI performance levels

Earlier chips only had two performance levels, but newer
ones potentially had more.  The message is harmless.  Drop the
message to avoid spamming the log.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1874
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Call dc_stream_release for remove link enc assignment

[Why]
A porting error resulted in the stream assignment for the link
being retained without being released - a memory leak.

[How]
Fix the porting error by adding back the dc_stream_release() intended
as part of the original patch.

Fixes: 0bb245558584 ("drm/amd/display: retain/release at proper places in link_enc assignment")

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add debug option for z9 disable interface

[Why]
To help triage issues and coordinate driver/bios release dependency

[How]
Only enable the new Z9 interface when debug option is set, otherwise
treat Z10 only support case as Zstate disallowed.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix zstate allow interface to PMFW

[Why]
psr_feature_enabled flag is dynamically updated, and sometimes when
zstate allow status is determined the flag has not been set to true yet
even on PSR enabled config, lid off/on is such a case, which will result
in zstate disabled even though PSR is supported.

[How]
Check the supported PSR version and the PSR disable status instead.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Disable physym clock

[How & Why]
Disable physym clock when it's not in use.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Eric Yang <Eric.Yang2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: David Galiffi <David.Galiffi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix disabling dccg clocks

[How & Why]
Updated procedure to match hardware programming guide.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Eric Yang <Eric.Yang2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: David Galiffi <David.Galiffi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: allow set dp drive setting when stream is not present

[why]
There is a change previously to disallow DM to set dp drive setings when
stream is not present. The logic might not work well with DP PHY
complaince scenario with a PHY test fixture attachment. We need to make
the method allow DP link drive settings changes even without stream
attached to it.

[how]
revert back to previous code in set drive setting function then add an
empty link_resource structure, then assign link resource based on
current link resource if link resource is allocated to the current pipe.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove unnecessary function definition

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.170

This version brings along the following fixes:

- Z9 improvements
- Clocks management adjustments
- Code cleanup
- Improve DSC and MST code

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Reset preferred training settings immediately

[Why & How]
In order to easily test ilr by immediately reset the preferred training settings,
fix the code to disable skip_immediate_retrain.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Solomon Chiu <solomon.chiu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: [FW Promotion] Release 0.0.101.0

- Add Scr8 for GPINT messaging between driver and fw

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Update VSC HDR infoPacket on TF change

[why]
OnSetSourceContentAttribute it does not trigger an update for the VSC
with TF change.

[how]
In this call, create a new VSC infoPacket based on the new config, and
allow DisplayTarget decide if an update and pursuant passive flip is
necessary

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Reza Amini <Reza.Amini@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove PHY repeater count check for LTTPR mode

[why]
Due to bad hardware, the PHY repeater count in LTTPR cap is read as 0xFF
in some monitors while the LTTPR is actually present.

[how]
Remove PHY repeater counter check when configuring LTTPR mode.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Sung Joon Kim <sungkim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Support synchronized indirect reg access

[Why]
indirect register index/data pair may be used by multi-threads.  when it
happens, it would cause register access issue that is hard to trace.

[How]
Using cgs service, which provide a sync indirect reg access api.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Roy Chan <roy.chan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DSC Enable for Synaptics Hub

DSC sequence for non virtual dpcd synaptics hub

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Retrieve MST Downstream Port Status

Determine if DFP present and the type of downstream device
based on dsc_aux

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add Synaptics Fifo Reset Workaround

Sequence to reset synaptics SDP fifo before enabling first stream

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add Cable ID support for native DP

[Why/How]
We need to handle cable capabilities for cables that support cable ID.
The cable attributes are intersected with the verified link caps to
determine appropriate max link rate. After determining cable attributes
we update the DP receiver.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: George Shen <George.Shen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Use PSR version selected during set_psr_caps

[Why]
If the DPCD caps specifies a PSR version newer than PSR_VERSION_1 then
we fallback to using PSR_VERSION_1 in amdgpu_dm_set_psr_caps.

This gets overriden with the raw DPCD value in amdgpu_dm_link_setup_psr,
which can result in DMCUB hanging if we pass in an unsupported PSR
version number.

[How]
Fix the hang by using link->psr_settings.psr_version directly during
amdgpu_dm_link_setup_psr.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Change return type of dm_helpers_dp_mst_stop_top_mgr

Prepare for future dm can have different implementation depends on the
return value.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Ian Chen <ian.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Only set PSR version when valid

[Why]
DMCUB will hang if we send a PSR unsupported set version command.

This can occur if we fall-through into the default case in the switch
statement for PSR version.

[How]
Add an unsupported check after the switch statement.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Change error to warning when hpd remains low for eDP

[WHY?]
SKUs that contain an unused eDP connector will throw an error when no
display is connected.

[HOW?]
Change error to a warning.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Dillon Varone <divarone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Driver support for MCLK query tool

Implement handling for escape call to query the MCLK switch support for
the current display config.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: do not compare integers of different widths

[Why & How]
Increase width of some variables to avoid comparing integers of
different widths

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add protection in link encoder matching logic

[Why]
Link encoders are created based on its engine ID. The position of a link
encoder in an array could be null since it didn't be allocated.  Current
matching logic didn't consider this situation and could get null
encoder.

[How]
To add null encoder check to make the matching logic can go to next to
get a valid one.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Martin Tsai <martin.tsai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Don't update drm connector when read local EDID

[Why]
Currently, when we're tentatively detecting link configuration under mst
case, we will wrongly notify a none existing stream sink to drm layer.

It's due to we'll call amdgpu_dm_update_connector_after_detect() within
dm_helpers_read_local_edid() to update connector when we're still under
tentative detection procedure.

[How]
dm_helpers_read_local_edid() was designed to do "read" only. Don't
update drm connector status when we're still under detection process.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix a coding error causing set throttled vcp size skipped for dpia

[why]
There is a recent refactor that contains a typo to cause set throttled
vcp size skipped for dpia link. The change is to fix this typo so it won't cause
black screen

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: rename dc_link_hwss struct to link_hwss

[why]
This is internal to dc so we don't have to add a prefix to indicate it
is dc link_hwss instead someone else link_hwss.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add more link_hwss types and method to decide which one

[why]
as we add more link_hwss we are making a generic way to determine which type
of link_hwss we should use.
Later on we may think of introduce a link policy layer. it could be a thin layer
that decide the type of link_hwss we use. So instead of passing in link and link_res
we can just pass in link_policy and swtich based on link_policy->get_link_hwss_type.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: abstract encoder related hwseq across different types

[why]
Current we have hundreds of if/else or switch statement to check
encoder type in dc_link level. The reason is because depending
on the type of encoder dc_link needs to perform similar programming
task but with different encoder interfaces. The story is to abstract
these interfaces so dc_link can just perform the programming task
without knowing the detail of which encoder it's dealing with.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Drop DCN for DP2.x logic

[Why & How]
DCN guard is not necessary for DP2.x relevant logic.
Drop them.

v2: squash in fix for misplaced #endif (Alex)

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Jerry Zuo <Jerry.Zuo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add work around to enforce TBT3 compatibility.

[Why]
According to the USB4 specification, FEC and DSC should be disabled
when a USB4 DPIA operates in TBT3 compatibility mode.

[How]
Upon detecting that a USB4 DPIA is connected to a device that is known
to operate in TBT3 mode, disable FEC and DSC support if they have been
reported by the TBT3 device.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Meenakshikumar Somasundaram <Meenakshikumar.Somasundaram@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: factor out dp detection link training and mst top detection

[why]
dc_link_detect_helper has multiple purpose:
1. Detect link and local sink.
2. Verify link capability by performing detection link training.
3. Start mst topology discovery and if succeeded fails the current interface.

This is difficult to maintain as item 2 has become more destructive to current
dc state. The change is to decouple these sequences to its own functions.
Eventually only item 2 is a destructive method and we will redesign this
sequence with a more unified policy across different encoder types.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: use existing fini_smc_tables function for cyan skillfish

Remove redundant code and use general smu_v11_0_fini_smc_tables function.

Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: add get_dpm_ultimate_freq function for cyan skillfish

Some clients(e.g., kfd) query sclk/mclk through this function.
As cyan skillfish doesn't support dpm, for sclk, set min/max
to CYAN_SKILLFISH_SCLK_MIN/CYAN_SKILLFISH_SCLK_MAX(to maintain the
existing logic).For others, set both min and max to current value.

Before this patch:
 # /opt/rocm/opencl/bin/clinfo

 Max clock frequency:                           0Mhz

After this patch:
 # /opt/rocm/opencl/bin/clinfo

 Max clock frequency:                           2000Mhz

v2:
 - Maintain the existing min/max sclk logic.(Lijo)
v3:
 - Avoid fetching metrics table twice.(Lijo)

Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amdgpu: No longer insert ras blocks into ras_list if it already exists in ras_list"

This reverts commit df4f0041c6ef497e598a67e367db835489162754.

Xgmi ras initialization had been moved from .late_init to early_init,
the defect of repeated calling amdgpu_ras_register_ras_block had been
fixed, so revert this patch.

Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Move xgmi ras initialization from .late_init to .early_init

Move xgmi ras initialization from .late_init to .early_init, which let
xgmi ras can be initialized only once.

Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix channel index mapping for SIENNA_CICHLID

Pmfw read ecc info registers in the following order,
     umc0: ch_inst 0, 1, 2 ... 7
     umc1: ch_inst 0, 1, 2 ... 7
The position of the register value stored in eccinfo
table is calculated according to the below formula,
     channel_index = umc_inst * channel_in_umc + ch_inst
Driver directly use the index of eccinfo table array
as channel index, it's not correct, driver needs convert
eccinfo table array index to channel index according to
channel_idx_tbl.

Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: switch to common helper to read bios from rom

create a common helper function for soc15 and onwards
to read bios image from rom

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: retire rlc callbacks sriov_rreg/wreg

Not needed anymore.

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Zhou, Peng Ju <PengJu.Zhou@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: switch to amdgpu_sriov_rreg/wreg

Instead of ip specific implementation for rlcg
indirect register access

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Zhou, Peng Ju <PengJu.Zhou@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add helper for rlcg indirect reg access

The helper will be used to access registers from sriov
guest in full access time

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Zhou, Peng Ju <PengJu.Zhou@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: init rlcg_reg_access_ctrl for gfx10

Initialize all the register offsets that will be
used in rlcg indirect reg access path for gfx10
in sw_init phase

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Zhou, Peng Ju <PengJu.Zhou@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: init rlcg_reg_access_ctrl for gfx9

Initialize all the register offsets that will be
used in rlcg indirect reg access path for gfx9 in
sw_init phase

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Zhou, Peng Ju <PengJu.Zhou@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add structures for rlcg indirect reg access

Add structures that are used to cache registers offsets
for rlcg indirect reg access ctrl and flag availability
of such interface

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Zhou, Peng Ju <PengJu.Zhou@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: switch to get_rlcg_reg_access_flag for gfx10

Switch to common helper to query rlcg access flag
specified by sriov host driver for gfx10

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Zhou, Peng Ju <PengJu.Zhou@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: switch to get_rlcg_reg_access_flag for gfx9

Switch to common helper to query rlcg access flag
specified by sriov host driver for gfx9

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Zhou, Peng Ju <PengJu.Zhou@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add helper to query rlcg reg access flag

Query rlc indirect register access approach specified
by sriov host driver per ip blocks

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Zhou, Peng Ju <PengJu.Zhou@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: clean up some inconsistent indenting

Eliminate the follow smatch warning:
drivers/gpu/drm/amd/display/dc/dml/calcs/dce_calcs.c:3415 bw_calcs() warn: inconsistent indenting

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix memory leak

[why]
Resource release is needed on the error handling path
to prevent memory leak.

[how]
Fix this by adding kfree on the error handling path.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Yongzhi Liu <lyz_cs@pku.edu.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: remove useless if

Clean the following coccicheck warning:

./drivers/gpu/drm/amd/pm/legacy-dpm/si_dpm.c:7035:2-4: WARNING: possible
condition with no effect (if == else).

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu/amdgpu_cs: fix refcount leak of a dma_fence obj

This issue takes place in an error path in
amdgpu_cs_fence_to_handle_ioctl(). When `info->in.what` falls into
default case, the function simply returns -EINVAL, forgetting to
decrement the reference count of a dma_fence obj, which is bumped
earlier by amdgpu_cs_get_fence(). This may result in reference count
leaks.

Fix it by decreasing the refcount of specific object before returning
the error code.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/display: use msleep rather than udelay for long delays

Some architectures (e.g., ARM) throw an compilation error if the
udelay is too long.  In general udelays of longer than 2000us are
not recommended on any architecture.  Switch to msleep in these
cases.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/display: adjust msleep limit in dp_wait_for_training_aux_rd_interval

Some architectures (e.g., ARM) have relatively low udelay limits.
On most architectures, anything longer than 2000us is not recommended.
Change the check to align with other similar checks in DC.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: filter out radeon secondary ids as well

Older radeon boards (r2xx-r5xx) had secondary PCI functions
which we solely there for supporting multi-head on OSs with
special requirements.  Add them to the unsupported list
as well so we don't attempt to bind to them.  The driver
would fail to bind to them anyway, but this does so
in a cleaner way that should not confuse the user.

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: use dev_*** to print output in multiple GPUs

In multiple GPU configuration, when failed to send a SMU
message, it's hard to figure out which GPU has such problem.
So it's not comfortable to user.

[40190.142181] amdgpu: [powerplay]
last message was failed ret is 65535
[40190.242420] amdgpu: [powerplay]
failed to send message 201 ret is 65535
[40190.392763] amdgpu: [powerplay]
last message was failed ret is 65535
[40190.492997] amdgpu: [powerplay]
failed to send message 200 ret is 65535
[40190.743575] amdgpu: [powerplay]
last message was failed ret is 65535
[40190.843812] amdgpu: [powerplay]
failed to send message 282 ret is 65535

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: drop WARN_ON in amdgpu_gart_bind/unbind

NULL pointer check has guarded it already.

calltrace:
amdgpu_ttm_gart_bind+0x49/0xa0 [amdgpu]
amdgpu_ttm_alloc_gart+0x13f/0x180 [amdgpu]
amdgpu_bo_create_reserved+0x139/0x2c0 [amdgpu]
? amdgpu_ttm_debugfs_init+0x120/0x120 [amdgpu]
amdgpu_bo_create_kernel+0x17/0x80 [amdgpu]
amdgpu_ttm_init+0x542/0x5e0 [amdgpu]

Fixes: 1b08dfb889b2c5 ("drm/amdgpu: remove gart.ready flag")
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Not to call dpcd_set_source_specific_data during resume.

[Why]
During resume path, dpcd_set_source_specific_data is taking
extra time when core_link_write_dpcd fails on DP_SOURCE_OUI+0x03
and DP_SOURCE_MINIMUM_HBLANK_SUPPORTED. Here,aux->transfer fails
with multiple retries and consume significant amount time during
S0i3 resume.

[How]
Not to call dpcd_set_source_specific_data during resume path
when there is no oled panel connected and achieve faster resume
during S0i3.

Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Rajib Mahapatra <rajib.mahapatra@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: drop unneeded hwmgr->smu_lock

As all those related APIs are already well protected by adev->pm.mutex.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: drop unneeded feature->mutex

As all those related APIs are already well protected by adev->pm.mutex.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: drop unneeded smu_baco->mutex

As those APIs related are already well protected by adev->pm.mutex.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: drop unneeded smu->sensor_lock

As all those related APIs are already well protected by
adev->pm.mutex and smu->message_lock.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>