linux-2.6-microblaze.git
8 years agodrm/imx: removed optional dummy encoder mode_fixup function.
Carlos Palminha [Mon, 15 Feb 2016 13:00:13 +0000 (13:00 +0000)]
drm/imx: removed optional dummy encoder mode_fixup function.

mode_fixup function for encoder drivers became optional with patch
http://patchwork.freedesktop.org/patch/msgid/1455106522-32307-1-git-send-email-palminha@synopsys.com

This patch set nukes all the dummy mode_fixup implementations.

(made on top of Daniel topic/drm-misc branch)

Signed-off-by: Carlos Palminha <palminha@synopsys.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/8bf274e8f6908142a9f940d3f2913e4a735e0caa.1455540137.git.palminha@synopsys.com
8 years agodrm/gma500: removed optional dummy encoder mode_fixup function.
Carlos Palminha [Mon, 15 Feb 2016 13:00:00 +0000 (13:00 +0000)]
drm/gma500: removed optional dummy encoder mode_fixup function.

mode_fixup function for encoder drivers became optional with patch
http://patchwork.freedesktop.org/patch/msgid/1455106522-32307-1-git-send-email-palminha@synopsys.com

This patch set nukes all the dummy mode_fixup implementations.

(made on top of Daniel topic/drm-misc branch)

Signed-off-by: Carlos Palminha <palminha@synopsys.com>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/b704458dc68a73cfb5507933c1df0c2a79e186eb.1455540137.git.palminha@synopsys.com
8 years agodrm/radeon: removed optional dummy encoder mode_fixup function.
Carlos Palminha [Mon, 15 Feb 2016 13:01:05 +0000 (13:01 +0000)]
drm/radeon: removed optional dummy encoder mode_fixup function.

mode_fixup function for encoder drivers became optional with patch
http://patchwork.freedesktop.org/patch/msgid/1455106522-32307-1-git-send-email-palminha@synopsys.com

This patch set nukes all the dummy mode_fixup implementations.

(made on top of Daniel topic/drm-misc branch)

Signed-off-by: Carlos Palminha <palminha@synopsys.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1b99680b8cf81977597dec5daedff9b684d3ed19.1455540137.git.palminha@synopsys.com
8 years agodrm/cirrus: removed optional dummy encoder mode_fixup function.
Carlos Palminha [Mon, 15 Feb 2016 12:59:23 +0000 (12:59 +0000)]
drm/cirrus: removed optional dummy encoder mode_fixup function.

mode_fixup function for encoder drivers became optional with patch
http://patchwork.freedesktop.org/patch/msgid/1455106522-32307-1-git-send-email-palminha@synopsys.com

This patch set nukes all the dummy mode_fixup implementations.

(made on top of Daniel topic/drm-misc branch)

Signed-off-by: Carlos Palminha <palminha@synopsys.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/a53767402bd4a69c3d2a546b7f4d4d122134b545.1455540137.git.palminha@synopsys.com
8 years agodrm/bochs: removed optional dummy encoder mode_fixup function.
Carlos Palminha [Mon, 15 Feb 2016 12:59:12 +0000 (12:59 +0000)]
drm/bochs: removed optional dummy encoder mode_fixup function.

mode_fixup function for encoder drivers became optional with patch
http://patchwork.freedesktop.org/patch/msgid/1455106522-32307-1-git-send-email-palminha@synopsys.com

This patch set nukes all the dummy mode_fixup implementations.

(made on top of Daniel topic/drm-misc branch)

Signed-off-by: Carlos Palminha <palminha@synopsys.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/d8b87edea28c8211e1711348143e4c355764a8c4.1455540137.git.palminha@synopsys.com
8 years agodrm/ast: removed optional dummy encoder mode_fixup function.
Carlos Palminha [Mon, 15 Feb 2016 12:59:00 +0000 (12:59 +0000)]
drm/ast: removed optional dummy encoder mode_fixup function.

mode_fixup function for encoder drivers became optional with patch
http://patchwork.freedesktop.org/patch/msgid/1455106522-32307-1-git-send-email-palminha@synopsys.com

This patch set nukes all the dummy mode_fixup implementations.

(made on top of Daniel topic/drm-misc branch)

Signed-off-by: Carlos Palminha <palminha@synopsys.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/12e1e900724c890166b88b0f4d67baba387482af.1455540137.git.palminha@synopsys.com
8 years agodrm/amdgpu: removed optional dummy encoder mode_fixup function.
Carlos Palminha [Mon, 15 Feb 2016 12:58:31 +0000 (12:58 +0000)]
drm/amdgpu: removed optional dummy encoder mode_fixup function.

mode_fixup function for encoder drivers became optional with patch
http://patchwork.freedesktop.org/patch/msgid/1455106522-32307-1-git-send-email-palminha@synopsys.com

This patch set nukes all the dummy mode_fixup implementations.

(made on top of Daniel topic/drm-misc branch)

Signed-off-by: Carlos Palminha <palminha@synopsys.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/8c4710ee930d2ab3a505b8d3cd724f4f4c79b3df.1455540137.git.palminha@synopsys.com
8 years agodrm/exynos: removed optional dummy encoder mode_fixup function.
Carlos Palminha [Mon, 15 Feb 2016 12:58:20 +0000 (12:58 +0000)]
drm/exynos: removed optional dummy encoder mode_fixup function.

mode_fixup function for encoder drivers became optional with patch
http://patchwork.freedesktop.org/patch/msgid/1455106522-32307-1-git-send-email-palminha@synopsys.com

This patch set nukes all the dummy mode_fixup implementations.

(made on top of Daniel topic/drm-misc branch)

Signed-off-by: Carlos Palminha <palminha@synopsys.com>
[danvet: Squash in 2nd exynos patch.]
Link: http://patchwork.freedesktop.org/patch/msgid/3768b670931572de51fca1102efa18d20dd770ee.1455540137.git.palminha@synopsys.com
Link: http://patchwork.freedesktop.org/patch/msgid/4906a9925eebbe55489b1005c449b426a61c09bd.1455540137.git.palminha@synopsys.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
8 years agodrm/udl: removed optional dummy encoder mode_fixup function.
Carlos Palminha [Mon, 15 Feb 2016 12:57:58 +0000 (12:57 +0000)]
drm/udl: removed optional dummy encoder mode_fixup function.

mode_fixup function for encoder drivers became optional with patch
http://patchwork.freedesktop.org/patch/msgid/1455106522-32307-1-git-send-email-palminha@synopsys.com

This patch set nukes all the dummy mode_fixup implementations.

(made on top of Daniel topic/drm-misc branch)

Signed-off-by: Carlos Palminha <palminha@synopsys.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/a7ebfb6c6c333056d0a77d2684c539107ee63589.1455540137.git.palminha@synopsys.com
8 years agodrm/virtio: removed optional dummy encoder mode_fixup function.
Carlos Palminha [Mon, 15 Feb 2016 12:57:38 +0000 (12:57 +0000)]
drm/virtio: removed optional dummy encoder mode_fixup function.

mode_fixup function for encoder drivers became optional with patch
http://patchwork.freedesktop.org/patch/msgid/1455106522-32307-1-git-send-email-palminha@synopsys.com

This patch set nukes all the dummy mode_fixup implementations.

(made on top of Daniel topic/drm-misc branch)

Signed-off-by: Carlos Palminha <palminha@synopsys.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/85230bc1356eb52257aaa1e1965adae2f00db5cd.1455540137.git.palminha@synopsys.com
8 years agodrm/fb_helper: Use add_one_connector in add_all_connectors.
Maarten Lankhorst [Mon, 15 Feb 2016 12:45:16 +0000 (13:45 +0100)]
drm/fb_helper: Use add_one_connector in add_all_connectors.

add_all_connectors doesn't checks whether reallocation is needed, but add_one does.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1455540316-17066-2-git-send-email-maarten.lankhorst@linux.intel.com
8 years agodrm/fb_helper: Use correct allocation count for arrays.
Maarten Lankhorst [Mon, 15 Feb 2016 12:45:15 +0000 (13:45 +0100)]
drm/fb_helper: Use correct allocation count for arrays.

The fb helper iterates over connectors, using fb_helper->num_connectors
makes it more clear what size the allocations are.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1455540316-17066-1-git-send-email-maarten.lankhorst@linux.intel.com
8 years agodrm/i915: Set aux.dev to the drm_connector device, instead of drm_device.
Rafael Antognolli [Thu, 21 Jan 2016 23:10:20 +0000 (15:10 -0800)]
drm/i915: Set aux.dev to the drm_connector device, instead of drm_device.

So far, the i915 driver and some other drivers set it to the drm_device,
which doesn't allow one to know which DP a given aux channel is related
to. Changing this to be the drm_connector provides proper nesting, still
allowing one to get the drm_device from it. Some drivers already set it
to the drm_connector.

This also removes the need to add a sysfs link for the i2c device under
the connector, as it will already be there.

v9:
 - As a side effect, drm_dp_aux_unregister() must be called before
 intel_connector_unregister(), as both the aux.dev and the i2c adapter
 dev are children of the drm_connector device now. Calling
 drm_dp_aux_unregister() before prevents them from being destroyed
 twice.

v10:
 - move aux_fini() to connector_unregister(), instead of moving
 drm_dp_aux_unregister() outside of connector_register().

Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1453417821-2811-4-git-send-email-rafael.antognolli@intel.com
8 years agodma-buf: Add ioctls to allow userspace to flush
Daniel Vetter [Thu, 11 Feb 2016 22:04:51 +0000 (20:04 -0200)]
dma-buf: Add ioctls to allow userspace to flush

The userspace might need some sort of cache coherency management e.g. when CPU
and GPU domains are being accessed through dma-buf at the same time. To
circumvent this problem there are begin/end coherency markers, that forward
directly to existing dma-buf device drivers vfunc hooks. Userspace can make use
of those markers through the DMA_BUF_IOCTL_SYNC ioctl. The sequence would be
used like following:
     - mmap dma-buf fd
     - for each drawing/upload cycle in CPU 1. SYNC_START ioctl, 2. read/write
       to mmap area 3. SYNC_END ioctl. This can be repeated as often as you
       want (with the new data being consumed by the GPU or say scanout device)
     - munmap once you don't need the buffer any more

v2 (Tiago): Fix header file type names (u64 -> __u64)
v3 (Tiago): Add documentation. Use enum dma_buf_sync_flags to the begin/end
dma-buf functions. Check for overflows in start/length.
v4 (Tiago): use 2d regions for sync.
v5 (Tiago): forget about 2d regions (v4); use _IOW in DMA_BUF_IOCTL_SYNC and
remove range information from struct dma_buf_sync.
v6 (Tiago): use __u64 structured padded flags instead enum. Adjust
documentation about the recommendation on using sync ioctls.
v7 (Tiago): Alex' nit on flags definition and being even more wording in the
doc about sync usage.
v9 (Tiago): remove useless is_dma_buf_file check. Fix sync.flags conditionals
and its mask order check. Add <linux/types.h> include in dma-buf.h.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Reviewed-by: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Tiago Vignatti <tiago.vignatti@intel.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1455228291-29640-1-git-send-email-tiago.vignatti@intel.com
8 years agodrm/dp: Add a drm_aux-dev module for reading/writing dpcd registers.
Rafael Antognolli [Thu, 21 Jan 2016 23:10:19 +0000 (15:10 -0800)]
drm/dp: Add a drm_aux-dev module for reading/writing dpcd registers.

This module is heavily based on i2c-dev. Once loaded, it provides one
dev node per DP AUX channel, named drm_dp_auxN, where N is an integer.

It's possible to know which connector owns this aux channel by looking
at the respective sysfs /sys/class/drm_aux_dev/drm_dp_auxN/connector, if
the connector device pointer was correctly set in the aux helper struct.

Two main operations are provided on the registers read and write. The
address of the register to be read or written is given using lseek. The
seek position is updated upon read or write.

v2:
 - lseek is used to select the register to read/write
 - read/write are used instead of ioctl
 - no blocking_notifier is used, just a direct callback

v3:
 - use drm_dp_aux_dev prefix for public functions
 - chardev is named drm_dp_auxN
 - read/write don't allocate a buffer anymore, and transfer up to 16 bytes a
   time
 - remove notifier list from the implementation
 - option on menuconfig is now a boolean
 - add inline stub functions to avoid breakage when this option is disabled

v4:
 - fix build system changes - actually disable this module when not selected.

v5:
 - Use kref to avoid device closing while still in use
 - Don't use list, use an idr for storing aux_dev
 - Remove "connector" attribute
 - set aux.dev to the connector drm_connector device, instead of
   drm_device

v6:
 - Use atomic_t for usage count
 - Use a mutex instead of spinlock for idr lock
 - Destroy chardev immediately on unregister
 - other minor suggestions from Ville

v7:
 - style fixes
 - error handling fixes

v8:
 - more error handling fixes

v9:
 - remove module_init and module_exit, and add drm_dp_aux_dev_init/exit
 to drm_kms_helper_init/exit.

Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1453417821-2811-3-git-send-email-rafael.antognolli@intel.com
8 years agodrm/kms_helper: Add a common place to call init and exit functions.
Rafael Antognolli [Thu, 21 Jan 2016 23:10:18 +0000 (15:10 -0800)]
drm/kms_helper: Add a common place to call init and exit functions.

The module_init and module_exit functions will start here, and call the
subsequent init's and exit's.

v10:
 - Keep __init on drm_fb_helper init function.
 - Move MODULE_* macros to the common file.

Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1453417821-2811-2-git-send-email-rafael.antognolli@intel.com
8 years agodrm/msm: remove unused variable
Arnd Bergmann [Thu, 11 Feb 2016 09:10:00 +0000 (10:10 +0100)]
drm/msm: remove unused variable

After the drm_device_is_unplugged() was removed, the 'dev' variable is now
unused, and we get a warning for that:

drivers/gpu/drm/msm/msm_fbdev.c: In function 'msm_fbdev_mmap':
drivers/gpu/drm/msm/msm_fbdev.c:65:21: error: unused variable 'dev' [-Werror=unused-variable]

This removes the variable as well.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: e9f8250f2f92 ("drm/msm: remove the drm_device_is_unplugged check")
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1455181810-3910161-1-git-send-email-arnd@arndb.de
8 years agodrm/bridge: removed dummy mode_fixup function from dw-hdmi.
Carlos Palminha [Wed, 10 Feb 2016 16:10:39 +0000 (16:10 +0000)]
drm/bridge: removed dummy mode_fixup function from dw-hdmi.

Other bridge drivers don't implement this optional function.
Removed dummy code from dw-hdmi brigde driver.

Signed-off-by: Carlos Palminha <palminha@synopsys.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1455120639-29934-1-git-send-email-palminha@synopsys.com
8 years agodrm/i2c/tda998x: removed unnecessary code, mode_fixup is now optional.
Carlos Palminha [Wed, 10 Feb 2016 15:29:27 +0000 (15:29 +0000)]
drm/i2c/tda998x: removed unnecessary code, mode_fixup is now optional.

Removed dummy mode_fixup.

Signed-off-by: Carlos Palminha <palminha@synopsys.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1455118167-12178-3-git-send-email-palminha@synopsys.com
8 years agodrm/i2c/sil164: removed unnecessary code, mode_fixup is now optional.
Carlos Palminha [Wed, 10 Feb 2016 15:29:26 +0000 (15:29 +0000)]
drm/i2c/sil164: removed unnecessary code, mode_fixup is now optional.

Removed dummy mode_fixup.

Signed-off-by: Carlos Palminha <palminha@synopsys.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1455118167-12178-2-git-send-email-palminha@synopsys.com
8 years agoapple-gmux: Fix build breakage if !CONFIG_ACPI
Lukas Wunner [Wed, 10 Feb 2016 13:17:41 +0000 (14:17 +0100)]
apple-gmux: Fix build breakage if !CONFIG_ACPI

The DRM drivers i915, nouveau and radeon may be compiled with
CONFIG_ACPI not set, in which case acpi_dev_present() is undefined.

Add a no-op stub for apple_gmux_present() which is used if
CONFIG_APPLE_GMUX is not enabled to avoid build breakage.
(CONFIG_APPLE_GMUX depends on CONFIG_ACPI.)

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20160210131741.GA15492@wunner.de
8 years agodrm: fixes crct set_mode when encoder mode_fixup is null.
Carlos Palminha [Wed, 10 Feb 2016 12:15:22 +0000 (12:15 +0000)]
drm: fixes crct set_mode when encoder mode_fixup is null.

Avoids null crash when encoders don't implement mode_fixup.

Signed-off-by: Carlos Palminha <palminha@synopsys.com>
[danvet: Also update kerneldoc.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1455106522-32307-1-git-send-email-palminha@synopsys.com
8 years agodrm: fixes when i2c encoder slave mode_fixup is null.
Carlos Palminha [Wed, 10 Feb 2016 12:08:38 +0000 (12:08 +0000)]
drm: fixes when i2c encoder slave mode_fixup is null.

Avoid i2c slave encoder drivers to copy/paste code to implement functions that will
only return true.

Signed-off-by: Carlos Palminha <palminha@synopsys.com>
[danvet: whitespace requested by Jani.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1455106118-32145-1-git-send-email-palminha@synopsys.com
8 years agodrm/gma500: fix error path in gma_intel_setup_gmbus()
Rasmus Villemoes [Tue, 9 Feb 2016 20:11:12 +0000 (21:11 +0100)]
drm/gma500: fix error path in gma_intel_setup_gmbus()

The current code fails to call i2c_del_adapter on
dev_prev->gmbus[0].adapter, and if the for loop above failed already
at i==0, all hell breaks loose when we do the loop body for
i = -1,-2,...

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Link: http://patchwork.freedesktop.org/patch/msgid/1455048677-19882-2-git-send-email-linux@rasmusvillemoes.dk
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
8 years agodrm: Add drm_format_plane_width() and drm_format_plane_height()
Ville Syrjälä [Tue, 9 Feb 2016 15:29:44 +0000 (17:29 +0200)]
drm: Add drm_format_plane_width() and drm_format_plane_height()

Add a few helpers to get the dimensions of the chroma plane(s).

v2: Add kernel-doc (Daniel)
v3: Fix kerneldoc "Returns:" style (Daniel)
    Uninline the functions and check for num_planes (Daniel)
v4: Add the required EXPORT_SYMBOL()s

Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1455031784-10941-1-git-send-email-ville.syrjala@linux.intel.com
8 years agodrm/msm: remove the drm_device_is_unplugged check
Haixia Shi [Fri, 5 Feb 2016 21:57:43 +0000 (13:57 -0800)]
drm/msm: remove the drm_device_is_unplugged check

This flag is only used for drm/udl.

Signed-off-by: Haixia Shi <hshi@chromium.org>
Reviewed-by: Stéphane Marchesin <marcheu@chromium.org>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1454709464-2536-1-git-send-email-hshi@chromium.org
8 years agodrm: modes: add missing [drm] to message printing
LABBE Corentin [Thu, 4 Feb 2016 14:03:52 +0000 (15:03 +0100)]
drm: modes: add missing [drm] to message printing

The warning message in drm_mode_parse_command_line_for_connector miss
the [drm] at beginning.
This patch add it and take the opportunity to convert
printk(KERN_WARNING to pr_warn()

Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1454594633-15100-1-git-send-email-clabbe.montjoie@gmail.com
8 years agoch7006: correctly handling failed allocation
Insu Yun [Thu, 28 Jan 2016 23:54:36 +0000 (18:54 -0500)]
ch7006: correctly handling failed allocation

Since drm_property_create_range can be failed in memory pressure,
it needs to be checked and return -ENOMEM.

Signed-off-by: Insu Yun <wuninsu@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1454025276-13465-1-git-send-email-wuninsu@gmail.com
8 years agodrm/radeon: Defer probe if gmux is present but its driver isn't
Lukas Wunner [Mon, 11 Jan 2016 19:09:20 +0000 (20:09 +0100)]
drm/radeon: Defer probe if gmux is present but its driver isn't

gmux is a microcontroller built into dual GPU MacBook Pros.
On pre-retina MBPs, if we're the inactive GPU, we need apple-gmux
to temporarily switch DDC so that we can probe the panel's EDID.

The checks for CONFIG_VGA_ARB and CONFIG_VGA_SWITCHEROO are necessary
because if either of them is disabled but gmux is present, the driver
would never load, even if we're the active GPU. (vga_default_device()
would evaluate to NULL and vga_switcheroo_handler_flags() would
evaluate to 0.)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/552da6d85a82092146af7b0693595fa2a9ea376b.1452525860.git.lukas@wunner.de
8 years agodrm/nouveau: Defer probe if gmux is present but its driver isn't
Lukas Wunner [Mon, 11 Jan 2016 19:09:20 +0000 (20:09 +0100)]
drm/nouveau: Defer probe if gmux is present but its driver isn't

gmux is a microcontroller built into dual GPU MacBook Pros.
On pre-retina MBPs, if we're the inactive GPU, we need apple-gmux
to temporarily switch DDC so that we can probe the panel's EDID.

The checks for CONFIG_VGA_ARB and CONFIG_VGA_SWITCHEROO are necessary
because if either of them is disabled but gmux is present, the driver
would never load, even if we're the active GPU. (vga_default_device()
would evaluate to NULL and vga_switcheroo_handler_flags() would
evaluate to 0.)

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115
Tested-by: Lukas Wunner <lukas@wunner.de>
    [MBP  9,1 2012  intel IVB + nvidia GK107  pre-retina  15"]
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/d9542ca5041178165d3ff286c90cc99634f7d2ce.1452525860.git.lukas@wunner.de
8 years agodrm/i915: Defer probe if gmux is present but its driver isn't
Lukas Wunner [Mon, 11 Jan 2016 19:09:20 +0000 (20:09 +0100)]
drm/i915: Defer probe if gmux is present but its driver isn't

gmux is a microcontroller built into dual GPU MacBook Pros.
On pre-retina MBPs, if we're the inactive GPU, we need apple-gmux
to temporarily switch DDC so that we can probe the panel's EDID.

The checks for CONFIG_VGA_ARB and CONFIG_VGA_SWITCHEROO are necessary
because if either of them is disabled but gmux is present, the driver
would never load, even if we're the active GPU. (vga_default_device()
would evaluate to NULL and vga_switcheroo_handler_flags() would
evaluate to 0.)

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115
Tested-by: Lukas Wunner <lukas@wunner.de>
    [MBP  9,1 2012  intel IVB + nvidia GK107  pre-retina  15"]
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/f56ee6a0600a3e1bb5bed4d0db4ed9ade7445c47.1452525860.git.lukas@wunner.de
8 years agoapple-gmux: Add helper for presence detect
Lukas Wunner [Mon, 11 Jan 2016 19:09:20 +0000 (20:09 +0100)]
apple-gmux: Add helper for presence detect

Centralize gmux' ACPI HID in a header file and add apple_gmux_present().
This can be used by other drivers to activate quirks specific to dual
GPU MacBook Pros & Mac Pros. The alternative would be to hardcode DMI
or PCI IDs and amend them whenever Apple introduces a new machine.

Tested-by: Lukas Wunner <lukas@wunner.de>
    [MBP  9,1 2012  intel IVB + nvidia GK107  pre-retina  15"]
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/89c23769058a340e5e11d4a7102f3793d3b0c94c.1452525860.git.lukas@wunner.de
8 years agodrm/radeon: Switch DDC when reading the EDID
Lukas Wunner [Mon, 11 Jan 2016 19:09:20 +0000 (20:09 +0100)]
drm/radeon: Switch DDC when reading the EDID

The pre-retina MacBook Pro uses an LVDS panel and a gmux controller
to switch the panel between its two GPUs. The panel mode in VBIOS
is notoriously bogus on these machines.

Use drm_get_edid_switcheroo() in lieu of drm_get_edid() on LVDS
if the vga_switcheroo handler is capable of temporarily switching
the panel's DDC lines to the discrete GPU. This allows us to retrieve
the EDID if the panel is currently muxed to the integrated GPU.

This only enables EDID probing on the pre-retina MBP (2008 - 2013).
The retina MBP (2012 - present) uses eDP and gmux is not capable of
switching AUX separately from the main link on these models.
This will be addressed in later patches.

List of pre-retina MBPs with dual GPUs, one of them AMD:
    [MBP  8,2 2011  intel SNB + amd turks     pre-retina  15"]
    [MBP  8,3 2011  intel SNB + amd turks     pre-retina  17"]

v3: Commit newly added due to introduction of drm_get_edid_switcheroo()
    wrapper which drivers need to opt-in to.

v5: Rebase on "vga_switcheroo: Add handler flags infrastructure",
    i.e. call drm_get_edid_switcheroo() only if the handler
    indicates that DDC is switchable.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/dae71655e8c484fbef492d3389c157975f9622c9.1452525860.git.lukas@wunner.de
8 years agodrm/nouveau: Switch DDC when reading the EDID
Lukas Wunner [Mon, 11 Jan 2016 19:09:20 +0000 (20:09 +0100)]
drm/nouveau: Switch DDC when reading the EDID

The pre-retina MacBook Pro uses an LVDS panel and a gmux controller
to switch the panel between its two GPUs. The panel mode in VBIOS
is notoriously bogus on these machines.

Use drm_get_edid_switcheroo() in lieu of drm_get_edid() on LVDS
if the vga_switcheroo handler is capable of temporarily switching
the panel's DDC lines to the discrete GPU. This allows us to retrieve
the EDID if the panel is currently muxed to the integrated GPU.
Likewise, ask vga_switcheroo to switch DDC before probing LVDS
connectors.

This only enables EDID probing on the pre-retina MBP (2008 - 2013).
The retina MBP (2012 - present) uses eDP and gmux is not capable of
switching AUX separately from the main link on these models.
This will be addressed in later patches.

List of pre-retina MBPs with dual GPUs, either or both Nvidia:
    [MBP  5,1 2008  nvidia MCP79 + G96        pre-retina  15"]
    [MBP  5,2 2009  nvidia MCP79 + G96        pre-retina  17"]
    [MBP  5,3 2009  nvidia MCP79 + G96        pre-retina  15"]
    [MBP  6,2 2010  intel ILK + nvidia GT216  pre-retina  15"]
    [MBP  6,1 2010  intel ILK + nvidia GT216  pre-retina  17"]
    [MBP  9,1 2012  intel IVB + nvidia GK107  pre-retina  15"]

v3: Commit newly added due to introduction of drm_get_edid_switcheroo()
    wrapper which drivers need to opt-in to.

v5: Rebase on "vga_switcheroo: Add handler flags infrastructure",
    i.e. call drm_get_edid_switcheroo() only if the handler
    indicates that DDC is switchable.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115
Tested-by: Lukas Wunner <lukas@wunner.de>
    [MBP  9,1 2012  intel IVB + nvidia GK107  pre-retina  15"]
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/e9466eb3d66b5b30f1e93c3b3da79d8b9ad0830f.1452525860.git.lukas@wunner.de
8 years agodrm/i915: Switch DDC when reading the EDID
Lukas Wunner [Mon, 11 Jan 2016 19:09:20 +0000 (20:09 +0100)]
drm/i915: Switch DDC when reading the EDID

The pre-retina MacBook Pro uses an LVDS panel and a gmux controller
to switch the panel between its two GPUs. The panel mode in VBIOS
is notoriously bogus on these machines and some models have no
VBIOS at all.

Use drm_get_edid_switcheroo() in lieu of drm_get_edid() on LVDS
if the vga_switcheroo handler is capable of temporarily switching
the panel's DDC lines to the integrated GPU. This allows us to
retrieve the EDID if the panel is currently muxed to the discrete GPU.

This only enables EDID probing on the pre-retina MBP (2008 - 2013).
The retina MBP (2012 - present) uses eDP and gmux is not capable of
switching AUX separately from the main link on these models.
This will be addressed in later patches.

List of pre-retina MBPs with dual GPUs, one of them Intel:
    [MBP  6,2 2010  intel ILK + nvidia GT216  pre-retina  15"]
    [MBP  6,1 2010  intel ILK + nvidia GT216  pre-retina  17"]
    [MBP  8,2 2011  intel SNB + amd turks     pre-retina  15"]
    [MBP  8,3 2011  intel SNB + amd turks     pre-retina  17"]
    [MBP  9,1 2012  intel IVB + nvidia GK107  pre-retina  15"]

v3: Commit newly added due to introduction of drm_get_edid_switcheroo()
    wrapper which drivers need to opt-in to.

v5: Rebase on "vga_switcheroo: Add handler flags infrastructure",
    i.e. call drm_get_edid_switcheroo() only if the handler
    indicates that DDC is switchable.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115
Tested-by: Lukas Wunner <lukas@wunner.de>
    [MBP  9,1 2012  intel IVB + nvidia GK107  pre-retina  15"]
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/bb095e14a2259be7fdd10092f9d6874a9be8f27b.1452525860.git.lukas@wunner.de
8 years agodrm/edid: Switch DDC when reading the EDID
Lukas Wunner [Mon, 11 Jan 2016 19:09:20 +0000 (20:09 +0100)]
drm/edid: Switch DDC when reading the EDID

Originally by Seth Forshee <seth.forshee@canonical.com>, 2012-10-04:
    Some dual graphics machines support muxing the DDC separately from
    the display, so make use of this functionality when reading the EDID
    on the inactive GPU. Also serialize drm_get_edid() with a mutex to
    avoid races on the DDC mux state.

Modified by Dave Airlie <airlied@gmail.com>, 2012-12-22:
    I can't figure out why I didn't like this, but I rewrote this [...]
    to lock/unlock the ddc lines [...]. I think I'd prefer something
    like that otherwise the interface got really ugly.

Modified by Lukas Wunner <lukas@wunner.de>, 2015-04 - 2015-09:
    v3:   Move vga_switcheroo calls to a wrapper around drm_get_edid()
          which drivers can call on muxed machines. This avoids other
          drivers having to go through the vga_switcheroo motions even
          though they are never used on a muxed platform
          (Thierry Reding, Daniel Vetter, Alex Deucher)

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115
Tested-by: Pierre Moreau <pierre.morrow@free.fr>
    [MBP  5,3 2009  nvidia MCP79 + G96        pre-retina  15"]
Tested-by: William Brown <william@blackhats.net.au>
    [MBP  8,2 2011  intel SNB + amd turks     pre-retina  15"]
Tested-by: Lukas Wunner <lukas@wunner.de>
    [MBP  9,1 2012  intel IVB + nvidia GK107  pre-retina  15"]
Cc: Seth Forshee <seth.forshee@canonical.com>
Cc: Dave Airlie <airlied@gmail.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/b898d0da4c134f2642d0122479006863e1830723.1452525860.git.lukas@wunner.de
8 years agoapple-gmux: Add switch_ddc support
Lukas Wunner [Mon, 11 Jan 2016 19:09:20 +0000 (20:09 +0100)]
apple-gmux: Add switch_ddc support

Originally by Seth Forshee <seth.forshee@canonical.com>, 2012-10-04:
    The gmux allows muxing the DDC independently from the display, so
    support this functionality. This will allow reading the EDID for the
    inactive GPU, fixing issues with machines that either don't have a
    VBT or have invalid mode data in the VBT.

Modified by Lukas Wunner <lukas@wunner.de>, 2015-04 - 2015-12:
    Change semantics of ->switch_ddc handler callback to return previous
    DDC owner. Original version tried to determine previous DDC owner
    with find_active_client() in vga_switcheroo but this fails if the
    inactive client registers before the active client.

    v2.4: Retain semantics of ->switchto handler callback to switch all
          pins, including DDC (Daniel Vetter)

    v4:   Advertise ->switch_ddc handler callback only on the pre-retina
          Macbook Pro. The retina uses eDP instead of LVDS and gmux no
          longer does the muxing itself but merely controls an external
          mux. That mux is incapable of switching the AUX channel
          separately from the main link. It's an NXP CBTL06142
          (alternate parts: TI HD3SS212, Pericom PI3VDP12412,
          see datasheets below).

    v5:   Rebase on "apple-gmux: Track switch state".
          Rebase on "vga_switcheroo: Add handler flags infrastructure".
          Rebase on 5d170139eb10 ("Constify vga_switcheroo_handler"),
          requires 2 structs, 1x with ->switchto for pre-retinas,
          1x without for retinas).
          Add error message if handler registration with vga_switcheroo
          fails.

    Teardowns identifying the mux:
    http://www.electronicproducts.com/-whatsinside_text-145.aspx
    http://slideshare.net/jjwu6266/apple-2012-wwdc-apple-macbook-pro-with-retina-display
    http://www.techrepublic.com/blog/cracking-open/teardown-shows-retina-macbook-pro-is-nearly-impossible-to-upgrade-difficult-to-work-on/

    Mux Datasheets:
    http://www.nxp.com/documents/data_sheet/CBTL06141.pdf
    http://www.ti.com/lit/ds/symlink/hd3ss212.pdf
    https://www.pericom.com/assets/Datasheets/PI3VDP12412.pdf

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115
Tested-by: Lukas Wunner <lukas@wunner.de>
    [MBP  9,1 2012  intel IVB + nvidia GK107  pre-retina  15"]
Cc: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/17fe8bfb0415d713bb4174f84ac9aae5d7d9a5f8.1452525860.git.lukas@wunner.de
8 years agoapple-gmux: Track switch state
Lukas Wunner [Mon, 11 Jan 2016 19:09:20 +0000 (20:09 +0100)]
apple-gmux: Track switch state

gmux has 3 switch registers:

* GMUX_PORT_SWITCH_DISPLAY switches the panel
* GMUX_PORT_SWITCH_DDC switches the panel's DDC lines
  (only on pre-retinas; on retinas this is a no-op)
* GMUX_PORT_SWITCH_EXTERNAL switches the external DP port(s)
  (only on models without Thunderbolt, i.e. introduced before 2011;
  those with Thunderbolt switch only HPD/AUX, not the main link)

Currently we switch all 3 registers in unison.

gmux does not preserve the switch state during suspend, so we currently
read GMUX_PORT_SWITCH_DISPLAY before suspend and restore all 3 registers
to this value on resume.

With the upcoming ->switch_ddc callback, GMUX_PORT_SWITCH_DDC may
temporarily contain a different value than the other 2 registers.
If we happen to suspend at this moment, we'll write an incorrect
value to GMUX_PORT_SWITCH_DDC on resume.

Also, on models with Thunderbolt the integrated GPU is unable to drive
the external DP port(s), so we want to keep GMUX_PORT_SWITCH_EXTERNAL
permanently switched to the discrete GPU on those machines.

Consequently we can no longer assume that GMUX_PORT_SWITCH_DISPLAY
represents the correct value for all 3 registers on suspend.

Track the state of all 3 registers: Add gmux_read_switch_state() and
gmux_write_switch_state(). Instead of reading the switch state on
every suspend, read it once on driver initialization so that we know
the current switch state all the time. (This allows us to use some
optimizations and shortcuts, e.g. we can skip switching DDC if we
know that it's already switched to the requested GPU.) Change the
->switchto callback to use gmux_write_switch_state().

Tested-by: Lukas Wunner <lukas@wunner.de>
    [MBP  9,1 2012  intel IVB + nvidia GK107  pre-retina  15"]
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/5679f414cb0ddf1654dcc359571f3764b275edf0.1452525860.git.lukas@wunner.de
8 years agovga_switcheroo: Add support for switching only the DDC
Lukas Wunner [Mon, 11 Jan 2016 19:09:20 +0000 (20:09 +0100)]
vga_switcheroo: Add support for switching only the DDC

Originally by Seth Forshee <seth.forshee@canonical.com>, 2012-10-04:
    During graphics driver initialization it's useful to be able to mux
    only the DDC to the inactive client in order to read the EDID. Add
    a switch_ddc callback to allow capable handlers to provide this
    functionality, and add vga_switcheroo_switch_ddc() to allow DRM
    to mux only the DDC.

Modified by Dave Airlie <airlied@gmail.com>, 2012-12-22:
    I can't figure out why I didn't like this, but I rewrote this [...]
    to lock/unlock the ddc lines [...]. I think I'd prefer something
    like that otherwise the interface got really ugly.

Modified by Lukas Wunner <lukas@wunner.de>, 2015-04 - 2015-10:
    Change semantics of ->switch_ddc handler callback to return previous
    DDC owner. Original version tried to determine previous DDC owner
    with find_active_client() but this fails if the inactive client
    registers before the active client.

    Don't lock vgasr_mutex in _lock_ddc() / _unlock_ddc(), it can cause
    deadlocks because (a) during switch (with vgasr_mutex already held),
    GPU is woken and probes its outputs, tries to re-acquire vgasr_mutex
    to lock DDC lines; (b) Likewise during switch, GPU is suspended and
    calls cancel_delayed_work_sync() to stop output polling, if poll
    task is running at this moment we may wait forever for it to finish.

    Instead, lock mux_hw_lock when unregistering the handler because
    the only reason why we'd want to lock vgasr_mutex in _lock_ddc() /
    _unlock_ddc() is to block the handler from disappearing while DDC
    lines are switched.

    Also acquire mux_hw_lock in stage2 to avoid race condition where
    reading the EDID and switching happens simultaneously. Likewise on
    MIGD / MDIS commands and on runtime suspend.

    v2.1: Overhaul locking, squash commits (Daniel Vetter)

    v2.2: Readability improvements (Thierry Reding)

    v2.3: Overhaul locking once more

    v2.4: Retain semantics of ->switchto handler callback to switch all
          pins, including DDC (Daniel Vetter)

    v5:   Rename ddc_lock to mux_hw_lock: Since we acquire this both
          when calling ->switch_ddc and ->switchto, it protects not just
          access to the DDC lines but to the mux in general. This is in
          line with the DRM convention to use low-level locks to avoid
          concurrent hw access (e.g. i2c, dp_aux) which are often called
          hw_lock (Daniel Vetter)

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115
Tested-by: Lukas Wunner <lukas@wunner.de>
    [MBP  9,1 2012  intel IVB + nvidia GK107  pre-retina  15"]
Cc: Seth Forshee <seth.forshee@canonical.com>
Cc: Dave Airlie <airlied@gmail.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/e81ae9722b84c5ed591805fee3ea6dbf5dc6c4b3.1452525860.git.lukas@wunner.de
8 years agovga_switcheroo: Add handler flags infrastructure
Lukas Wunner [Mon, 11 Jan 2016 19:09:20 +0000 (20:09 +0100)]
vga_switcheroo: Add handler flags infrastructure

Allow handlers to declare their capabilities and allow clients to
obtain that information. So far we have these use cases:

* If the handler is able to switch DDC separately, clients need to
  probe EDID with drm_get_edid_switcheroo(). We should allow them
  to detect a capable handler to ensure this function only gets
  called when needed.

* Likewise if the handler is unable to switch AUX separately, the active
  client needs to communicate link training parameters to the inactive
  client, which may then skip the AUX handshake and set up its output
  with these pre-calibrated values (DisplayPort specification v1.1a,
  section 2.5.3.3). Clients need a way to recognize such a situation.

The flags for the radeon_atpx_handler and amdgpu_atpx_handler are
initially set to 0, this can later on be amended with
  handler_flags |= VGA_SWITCHEROO_CAN_SWITCH_DDC;
when a ->switch_ddc callback is added.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115
Tested-by: Lukas Wunner <lukas@wunner.de>
    [MBP  9,1 2012  intel IVB + nvidia GK107  pre-retina  15"]
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/2b0d93ed6e511ca09e95e45e0b35627f330fabce.1452525860.git.lukas@wunner.de
8 years agodrm/atomic: Add encoder_mask to crtc_state, v3.
Maarten Lankhorst [Thu, 28 Jan 2016 14:04:58 +0000 (15:04 +0100)]
drm/atomic: Add encoder_mask to crtc_state, v3.

This allows iteration over encoders without requiring connection_mutex.

Changes since v1:
- Add a set_best_encoder helper function and update encoder_mask inside
  it.
Changes since v2:
- Relax the WARN_ON(!crtc), with explanation.
- Call set_best_encoder when connector is moved between crtc's.
- Add some paranoia to steal_encoder to prevent accidentally setting
  best_encoder to NULL.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/56AA200A.6070501@linux.intel.com
8 years agodrm/atomic: Do not unset crtc when an encoder is stolen
Maarten Lankhorst [Thu, 7 Jan 2016 09:59:21 +0000 (10:59 +0100)]
drm/atomic: Do not unset crtc when an encoder is stolen

While we steal the encoder away from the connector the connector may
be updated to use a different encoder.

Without this change if 2 connectors swap encoders one of them will
end up without a crtc.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1452160762-30487-5-git-send-email-maarten.lankhorst@linux.intel.com
8 years agodrm/i915: Do not touch best_encoder for load detect.
Maarten Lankhorst [Thu, 7 Jan 2016 09:59:20 +0000 (10:59 +0100)]
drm/i915: Do not touch best_encoder for load detect.

This should only be touched by drm_atomic_helper.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1452160762-30487-4-git-send-email-maarten.lankhorst@linux.intel.com
8 years agodrm/core: Add drm_for_each_encoder_mask, v2.
Maarten Lankhorst [Thu, 7 Jan 2016 09:59:19 +0000 (10:59 +0100)]
drm/core: Add drm_for_each_encoder_mask, v2.

This is similar to the other drm_for_each_*_mask functions.

Changes since v1:
- Use for_each_if

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1452160762-30487-3-git-send-email-maarten.lankhorst@linux.intel.com
8 years agodrm/core: Add drm_encoder_index.
Maarten Lankhorst [Thu, 7 Jan 2016 09:59:18 +0000 (10:59 +0100)]
drm/core: Add drm_encoder_index.

This is useful for adding encoder_mask in crtc_state.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1452160762-30487-2-git-send-email-maarten.lankhorst@linux.intel.com
8 years agodrm/i915: Use CPU mapping for userspace dma-buf mmap()
Tiago Vignatti [Tue, 22 Dec 2015 21:36:48 +0000 (19:36 -0200)]
drm/i915: Use CPU mapping for userspace dma-buf mmap()

Userspace is the one in charge of flush CPU by wrapping mmap with
begin{,end}_cpu_access.

v2: Remove LLC check cause we have dma-buf sync providers now. Also, fix return
before transferring ownership when mmap fails.
v3: Fix return values.
v4: !obj->base.filp is user triggerable, so removed the WARN_ON.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Tiago Vignatti <tiago.vignatti@intel.com>
Reviewed-by: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1450820214-12509-6-git-send-email-tiago.vignatti@intel.com
8 years agodrm/i915: Implement end_cpu_access
Tiago Vignatti [Tue, 22 Dec 2015 21:36:47 +0000 (19:36 -0200)]
drm/i915: Implement end_cpu_access

This function is meant to be used with dma-buf mmap, when finishing the CPU
access of the mapped pointer.

The error case should be rare to happen though, requiring the buffer become
active during the sync period and for the end_cpu_access to be interrupted. So
we use a uninterruptible mutex_lock to spit out when it ever happens.

v2: disable interruption to make sure errors are reported.
v3: update to the new end_cpu_access API.
v7: use .write = false cause it doesn't need to know whether it's write.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Tiago Vignatti <tiago.vignatti@intel.com>
Reviewed-by: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1450820214-12509-5-git-send-email-tiago.vignatti@intel.com
8 years agodma-buf: Remove range-based flush
Tiago Vignatti [Tue, 22 Dec 2015 21:36:45 +0000 (19:36 -0200)]
dma-buf: Remove range-based flush

This patch removes range-based information used for optimizations in
begin_cpu_access and end_cpu_access.

We don't have any user nor implementation using range-based flush. It seems a
consensus that if we ever want something like that again (or even more robust
using 2D, 3D sub-range regions) we can use the upcoming dma-buf sync ioctl for
such.

Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Tiago Vignatti <tiago.vignatti@intel.com>
Reviewed-by: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1450820214-12509-3-git-send-email-tiago.vignatti@intel.com
8 years agodrm: prime: Honour O_RDWR during prime-handle-to-fd
Daniel Thompson [Tue, 22 Dec 2015 21:36:44 +0000 (19:36 -0200)]
drm: prime: Honour O_RDWR during prime-handle-to-fd

Currently DRM_IOCTL_PRIME_HANDLE_TO_FD rejects all flags except
(DRM|O)_CLOEXEC making it difficult (maybe impossible) for userspace
to mmap() the resulting dma-buf even when this is supported by the
DRM driver.

It is trivial to relax the restriction and permit read/write access.
This is safe because the flags are seldom touched by drm; mostly they
are passed verbatim to dma_buf calls.

v3 (Tiago): removed unused flags variable from drm_prime_handle_to_fd_ioctl.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Tiago Vignatti <tiago.vignatti@intel.com>
Reviewed-by: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1450820214-12509-2-git-send-email-tiago.vignatti@intel.com
8 years agodrm/tegra: drop unused variable.
Dave Airlie [Tue, 9 Feb 2016 01:17:37 +0000 (11:17 +1000)]
drm/tegra: drop unused variable.

Fixes: 0417d424a (drm/tegra: Stop cancelling page flip events)

Signed-off-by: Dave Airlie <airlied@redhat.com>
8 years agoMerge tag 'topic/drm-misc-2016-02-08' of git://anongit.freedesktop.org/drm-intel...
Dave Airlie [Tue, 9 Feb 2016 00:39:11 +0000 (10:39 +1000)]
Merge tag 'topic/drm-misc-2016-02-08' of git://anongit.freedesktop.org/drm-intel into drm-next

First drm-misc pull req for 4.6. Big one is the drm_event cleanup, which
is also prep work for adding android fence support to kms (Gustavo is
planning to do that). Otherwise random small bits all over.

* tag 'topic/drm-misc-2016-02-08' of git://anongit.freedesktop.org/drm-intel: (33 commits)
  gma500: clean up an excessive and confusing helper
  drm/gma500: remove helper function
  drm/vmwgfx: Nuke preclose hook
  drm/vc4: Nuke preclose hook
  drm/tilcdc: Nuke preclose hook
  drm/tegra: Stop cancelling page flip events
  drm/shmob: Nuke preclose hook
  drm/rcar: Nuke preclose hook
  drm/omap: Nuke close hooks
  drm/msm: Nuke preclose hooks
  drm/imx: Unconfuse preclose logic
  drm/exynos: Remove event cancelling from postclose
  drm/atmel: Nuke preclose
  drm/i915: Nuke intel_modeset_preclose
  drm: Nuke vblank event file cleanup code
  drm: Clean up pending events in the core
  drm/vblank: Use drm_event_reserve_init
  drm/vmwgfx: fix a NULL dereference
  drm/crtc-helper: Add caveat to disable_unused_functions doc
  drm/gma500: Remove empty preclose hook
  ...

8 years agoMerge tag 'drm-intel-next-2016-01-24' of git://anongit.freedesktop.org/drm-intel...
Dave Airlie [Tue, 9 Feb 2016 00:27:41 +0000 (10:27 +1000)]
Merge tag 'drm-intel-next-2016-01-24' of git://anongit.freedesktop.org/drm-intel into drm-next

- support for v3 vbt dsi blocks (Jani)
- improve mmio debug checks (Mika Kuoppala)
- reorg the ddi port translation table entries and related code (Ville)
- reorg gen8 interrupt handling for future platforms (Tvrtko)
- refactor tile width/height computations for framebuffers (Ville)
- kerneldoc integration for intel_pm.c (Jani)
- move default context from engines to device-global dev_priv (Dave Gordon)
- make seqno/irq ordering coherent with execlist (Chris)
- decouple internal engine number from UABI (Chris&Tvrtko)
- tons of small fixes all over, as usual

* tag 'drm-intel-next-2016-01-24' of git://anongit.freedesktop.org/drm-intel: (148 commits)
  drm/i915: Update DRIVER_DATE to 20160124
  drm/i915: Seal busy-ioctl uABI and prevent leaking of internal ids
  drm/i915: Decouple execbuf uAPI from internal implementation
  drm/i915: Use ordered seqno write interrupt generation on gen8+ execlists
  drm/i915: Limit the auto arming of mmio debugs on vlv/chv
  drm/i915: Tune down "GT register while GT waking disabled" message
  drm/i915: tidy up a few leftovers
  drm/i915: abolish separate per-ring default_context pointers
  drm/i915: simplify allocation of driver-internal requests
  drm/i915: Fix NULL plane->fb oops on SKL
  drm/i915: Do not put big intel_crtc_state on the stack
  Revert "drm/i915: Add two-stage ILK-style watermark programming (v10)"
  drm/i915: add DOC: headline to RC6 kernel-doc
  drm/i915: turn some bogus kernel-doc comments to normal comments
  drm/i915/sdvo: revert bogus kernel-doc comments to normal comments
  drm/i915/gen9: Correct max save/restore register count during gpu reset with GuC
  drm/i915: Demote user facing DMC firmware load failure message
  drm/i915: use hlist_for_each_entry
  drm/i915: skl_update_scaler() wants a rotation bitmask instead of bit number
  drm/i915: Don't reject primary plane windowing with color keying enabled on SKL+
  ...

8 years agogma500: clean up an excessive and confusing helper
Alan Cox [Fri, 29 Jan 2016 19:37:48 +0000 (19:37 +0000)]
gma500: clean up an excessive and confusing helper

This is a left over from the great clean ups in the past. It's confusing as
it returns an int, yet has one caller that never uses it. The caller already
has all the right private variables local so the entire function can be
replaced by a simple if call.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160129193731.8475.47809.stgit@localhost.localdomain
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
8 years agodrm/gma500: remove helper function
Sudip Mukherjee [Tue, 2 Feb 2016 06:05:55 +0000 (11:35 +0530)]
drm/gma500: remove helper function

We were getting build warning about:
drivers/gpu/drm/gma500/mdfld_dsi_output.c:407:2: warning: initialization
from incompatible pointer type

The callback to dpms was pointing to a helper function which had a
return type of void, whereas the callback should point to a function
which has a return type of int.
On closer look it turned out that we do not need the helper function
since if we call drm_helper_connector_dpms() directly, the first check
that drm_helper_connector_dpms() does is: if (mode == connector->dpms)

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1454393155-13142-1-git-send-email-sudipm.mukherjee@gmail.com
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
8 years agodrm/vmwgfx: Nuke preclose hook
Daniel Vetter [Mon, 25 Jan 2016 21:16:56 +0000 (22:16 +0100)]
drm/vmwgfx: Nuke preclose hook

Again since the drm core takes care of event unlinking/disarming this
is now just needless code.

v2: I've completely missed eaction->fpriv_head and all the related
code. We need to nuke that too to avoid accidentally deferencing the
freed-up vmwgfx-private fpriv.

v3: Also remove vmw_fpriv->fence_events and unused variables I missed.

Cc: Thomas Hellström <thellstrom@vmware.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1452548477-15905-23-git-send-email-daniel.vetter@ffwll.ch
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
8 years agodrm/vc4: Nuke preclose hook
Daniel Vetter [Mon, 25 Jan 2016 21:16:55 +0000 (22:16 +0100)]
drm/vc4: Nuke preclose hook

Again since the drm core takes care of event unlinking/disarming this
is now just needless code.

v2: Fixup misplaced hunk.

Cc: Eric Anholt <eric@anholt.net>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1)
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453756616-28942-14-git-send-email-daniel.vetter@ffwll.ch
8 years agodrm/tilcdc: Nuke preclose hook
Daniel Vetter [Mon, 25 Jan 2016 21:16:54 +0000 (22:16 +0100)]
drm/tilcdc: Nuke preclose hook

Again since the drm core takes care of event unlinking/disarming this
is now just needless code.

v2: Fixup misplaced hunks.

Cc: Rob Clark <robdclark@gmail.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1)
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453756616-28942-13-git-send-email-daniel.vetter@ffwll.ch
8 years agodrm/tegra: Stop cancelling page flip events
Daniel Vetter [Mon, 25 Jan 2016 21:16:53 +0000 (22:16 +0100)]
drm/tegra: Stop cancelling page flip events

The core takes care of that now.

v2: Fixup misplaced hunk.

Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Terje Bergström <tbergstrom@nvidia.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453756616-28942-12-git-send-email-daniel.vetter@ffwll.ch
8 years agodrm/shmob: Nuke preclose hook
Daniel Vetter [Mon, 25 Jan 2016 21:16:52 +0000 (22:16 +0100)]
drm/shmob: Nuke preclose hook

Again since the drm core takes care of event unlinking/disarming this
is now just needless code.

v2: Fixup misplaced hunk.

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1)
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453756616-28942-11-git-send-email-daniel.vetter@ffwll.ch
8 years agodrm/rcar: Nuke preclose hook
Daniel Vetter [Mon, 25 Jan 2016 21:16:51 +0000 (22:16 +0100)]
drm/rcar: Nuke preclose hook

Again since the drm core takes care of event unlinking/disarming this
is now just needless code.

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453756616-28942-10-git-send-email-daniel.vetter@ffwll.ch
8 years agodrm/omap: Nuke close hooks
Daniel Vetter [Mon, 25 Jan 2016 21:16:50 +0000 (22:16 +0100)]
drm/omap: Nuke close hooks

Again since the core takes care of this we can remove them. While at
it also remove the postclose hook, it's empty.

v2: Laurent pointed me at even more code to delete.

v3: Remove unused flags (Tomi).

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453756616-28942-9-git-send-email-daniel.vetter@ffwll.ch
8 years agodrm/msm: Nuke preclose hooks
Daniel Vetter [Mon, 25 Jan 2016 21:16:49 +0000 (22:16 +0100)]
drm/msm: Nuke preclose hooks

They only complete the page flip events to avoid oops when the drm
file closes. The core takes care of that now and we can remove this
code.

Cc: Rob Clark <robdclark@gmail.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453756616-28942-8-git-send-email-daniel.vetter@ffwll.ch
8 years agodrm/imx: Unconfuse preclose logic
Daniel Vetter [Mon, 25 Jan 2016 21:16:48 +0000 (22:16 +0100)]
drm/imx: Unconfuse preclose logic

So this one is special, since it tries to prevent races when userspace
crashes simply by disabling the vblank machinery. Well except that imx
always has vblanks enabled, and the disable_vblank hook actually just
tries to cancel a pending pageflip. Without any locking whatsoever. Of
course this is wrong, since it'll result in the hw not actually
displaying what drm thinks is the current frontbuffer.

Well since the core takes care of the disappearing DRM fd now. So we
can nuke all this confused code without ill side-effects.

Someone else needs to audit the locking for ->newfb and
->page_flip_event and fix it up. Common approach is to reuse
dev->event_lock for this.

Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453756616-28942-7-git-send-email-daniel.vetter@ffwll.ch
8 years agodrm/exynos: Remove event cancelling from postclose
Daniel Vetter [Mon, 25 Jan 2016 21:16:47 +0000 (22:16 +0100)]
drm/exynos: Remove event cancelling from postclose

The core takes care of this now. And since kfree(NULL) is ok we can
simplify the function even further now.

Note: There's another spin on this patch, but for different reasons,
in-flight already: http://www.spinics.net/lists/dri-devel/msg97922.html

Cc: Inki Dae <inki.dae@samsung.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453756616-28942-6-git-send-email-daniel.vetter@ffwll.ch
8 years agodrm/atmel: Nuke preclose
Daniel Vetter [Mon, 25 Jan 2016 21:16:46 +0000 (22:16 +0100)]
drm/atmel: Nuke preclose

The only thing this did was cancle pending flip events, and the core
takes care of that now.

Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453756616-28942-5-git-send-email-daniel.vetter@ffwll.ch
8 years agodrm/i915: Nuke intel_modeset_preclose
Daniel Vetter [Mon, 25 Jan 2016 21:16:45 +0000 (22:16 +0100)]
drm/i915: Nuke intel_modeset_preclose

Now that the drm core unlinks/disarms events there's no need to do so
ourselves anymore. Nuke the code.

Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453756616-28942-4-git-send-email-daniel.vetter@ffwll.ch
8 years agodrm: Nuke vblank event file cleanup code
Daniel Vetter [Mon, 25 Jan 2016 21:16:44 +0000 (22:16 +0100)]
drm: Nuke vblank event file cleanup code

The core code now takes care of unlinking drm_events from the file in
a generic way, so this code isn't needed any more.

For those wondering where the drm_vblank_put went to: With the new
logic events only get unlinked, but still exist. Hence any resources
(like vblank counters) don't need to be released since the event user
will still process the event normally. In this case this is the
callsites of send_vblank_event, which of course already have a
drm_vblank_put.

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453756616-28942-3-git-send-email-daniel.vetter@ffwll.ch
8 years agodrm: Clean up pending events in the core
Daniel Vetter [Mon, 25 Jan 2016 21:16:43 +0000 (22:16 +0100)]
drm: Clean up pending events in the core

There's really no reason to not do so, instead of replicating this
for every use-case and every driver. Now we can't just nuke the events,
since that would still mean that all drm_event users would need to know
when that has happened, since calling e.g. drm_send_event isn't allowed
any more. Instead just unlink them from the file, and detect this case
and handle it appropriately in all functions.

v2: Adjust existing kerneldoc too.

v3: Improve wording of the kerneldoc and split out vblank cleanup (Laurent).

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1)
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1453756616-28942-2-git-send-email-daniel.vetter@ffwll.ch
8 years agodrm/vblank: Use drm_event_reserve_init
Daniel Vetter [Thu, 28 Jan 2016 11:01:04 +0000 (12:01 +0100)]
drm/vblank: Use drm_event_reserve_init

Well we can't use that directly since that code must hold
dev->event_lock already. Extract an _unlocked version.

Embarrassingly I've totally forgotten about this patch and any kind of
event-based vblank wait totally blew up, killing the kernel.

v2: Pick the right base struct, someone didn't noticed that gcc was
unhappy. No bug since the addresses at least matched (Daniel Stone)

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Daniel Stone <daniels@collabora.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453978864-1513-1-git-send-email-daniel.vetter@ffwll.ch
8 years agoLinux 4.5-rc3
Linus Torvalds [Sun, 7 Feb 2016 23:38:30 +0000 (15:38 -0800)]
Linux 4.5-rc3

8 years agoMerge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Linus Torvalds [Sun, 7 Feb 2016 23:23:20 +0000 (15:23 -0800)]
Merge tag 'armsoc-fixes' of git://git./linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "The first real batch of fixes for this release cycle, so there are a
  few more than usual.

  Most of these are fixes and tweaks to board support (DT bugfixes,
  etc).  I've also picked up a couple of small cleanups that seemed
  innocent enough that there was little reason to wait (const/
  __initconst and Kconfig deps).

  Quite a bit of the changes on OMAP were due to fixes to no longer
  write to rodata from assembly when ARM_KERNMEM_PERMS was enabled, but
  there were also other fixes.

  Kirkwood had a bunch of gpio fixes for some boards.  OMAP had RTC
  fixes on OMAP5, and Nomadik had changes to MMC parameters in DT.

  All in all, mostly the usual mix of various fixes"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (46 commits)
  ARM: multi_v7_defconfig: enable DW_WATCHDOG
  ARM: nomadik: fix up SD/MMC DT settings
  ARM64: tegra: Add chosen node for tegra132 norrin
  ARM: realview: use "depends on" instead of "if" after prompt
  ARM: tango: use "depends on" instead of "if" after prompt
  ARM: tango: use const and __initconst for smp_operations
  ARM: realview: use const and __initconst for smp_operations
  bus: uniphier-system-bus: revive tristate prompt
  arm64: dts: Add missing DMA Abort interrupt to Juno
  bus: vexpress-config: Add missing of_node_put
  ARM: dts: am57xx: sbc-am57x: correct Eth PHY settings
  ARM: dts: am57xx: cl-som-am57x: fix CPSW EMAC pinmux
  ARM: dts: am57xx: sbc-am57x: fix UART3 pinmux
  ARM: dts: am57xx: cl-som-am57x: update SPI Flash frequency
  ARM: dts: am57xx: cl-som-am57x: set HOST mode for USB2
  ARM: dts: am57xx: sbc-am57x: fix SB-SOM EEPROM I2C address
  ARM: dts: LogicPD Torpedo: Revert Duplicative Entries
  ARM: dts: am437x: pixcir_tangoc: use correct flags for irq types
  ARM: dts: am4372: fix irq type for arm twd and global timer
  ARM: dts: at91: sama5d4 xplained: fix phy0 IRQ type
  ...

8 years agoMerge branch 'mailbox-devel' of git://git.linaro.org/landing-teams/working/fujitsu...
Linus Torvalds [Sun, 7 Feb 2016 23:17:47 +0000 (15:17 -0800)]
Merge branch 'mailbox-devel' of git://git.linaro.org/landing-teams/working/fujitsu/integration

Pull mailbox fixes from Jassi Brar:

 - fix getting element from the pcc-channels array by simply indexing
   into it

 - prevent building mailbox-test driver for archs that don't have IOMEM

* 'mailbox-devel' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  mailbox: Fix dependencies for !HAS_IOMEM archs
  mailbox: pcc: fix channel calculation in get_pcc_channel()

8 years agoMerge tag 'usb-4.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Linus Torvalds [Sun, 7 Feb 2016 06:14:46 +0000 (22:14 -0800)]
Merge tag 'usb-4.5-rc3' of git://git./linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are some USB fixes for 4.5-rc3.

  The usual, xhci fixes for reported issues, combined with some small
  gadget driver fixes, and a MAINTAINERS file update.  All have been in
  linux-next with no reported issues"

* tag 'usb-4.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  xhci: harden xhci_find_next_ext_cap against device removal
  xhci: Fix list corruption in urb dequeue at host removal
  usb: host: xhci-plat: fix NULL pointer in probe for device tree case
  usb: xhci-mtk: fix AHB bus hang up caused by roothubs polling
  usb: xhci-mtk: fix bpkts value of LS/HS periodic eps not behind TT
  usb: xhci: apply XHCI_PME_STUCK_QUIRK to Intel Broxton-M platforms
  usb: xhci: set SSIC port unused only if xhci_suspend succeeds
  usb: xhci: add a quirk bit for ssic port unused
  usb: xhci: handle both SSIC ports in PME stuck quirk
  usb: dwc3: gadget: set the OTG flag in dwc3 gadget driver.
  Revert "xhci: don't finish a TD if we get a short-transfer event mid TD"
  MAINTAINERS: fix my email address
  usb: dwc2: Fix probe problem on bcm2835
  Revert "usb: dwc2: Move reset into dwc2_get_hwparams()"
  usb: musb: ux500: Fix NULL pointer dereference at system PM
  usb: phy: mxs: declare variable with initialized value
  usb: phy: msm: fix error handling in probe.

8 years agoMerge tag 'staging-4.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh...
Linus Torvalds [Sun, 7 Feb 2016 06:13:16 +0000 (22:13 -0800)]
Merge tag 'staging-4.5-rc3' of git://git./linux/kernel/git/gregkh/staging

Pull staging and IIO driver fixes from Greg KH:
 "Here are some IIO and staging driver fixes for 4.5-rc3.

  All of them, except one, are for IIO drivers, and one is for a speakup
  driver fix caused by some earlier patches, to resolve a reported build
  failure"

* tag 'staging-4.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  Staging: speakup: Fix allyesconfig build on mn10300
  iio: dht11: Use boottime
  iio: ade7753: avoid uninitialized data
  iio: pressure: mpl115: fix temperature offset sign
  iio: imu: Fix dependencies for !HAS_IOMEM archs
  staging: iio: Fix dependencies for !HAS_IOMEM archs
  iio: adc: Fix dependencies for !HAS_IOMEM archs
  iio: inkern: fix a NULL dereference on error
  iio:adc:ti_am335x_adc Fix buffered mode by identifying as software buffer.
  iio: light: acpi-als: Report data as processed
  iio: dac: mcp4725: set iio name property in sysfs
  iio: add HAS_IOMEM dependency to VF610_ADC
  iio: add IIO_TRIGGER dependency to STK8BA50
  iio: proximity: lidar: correct return value
  iio-light: Use a signed return type for ltr501_match_samp_freq()

8 years agoMerge branch 'akpm' (patches from Andrew)
Linus Torvalds [Sat, 6 Feb 2016 04:20:07 +0000 (20:20 -0800)]
Merge branch 'akpm' (patches from Andrew)

Merge fixes from Andrew Morton:
 "22 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (22 commits)
  epoll: restrict EPOLLEXCLUSIVE to POLLIN and POLLOUT
  radix-tree: fix oops after radix_tree_iter_retry
  MAINTAINERS: trim the file triggers for ABI/API
  dax: dirty inode only if required
  thp: make deferred_split_scan() work again
  mm: replace vma_lock_anon_vma with anon_vma_lock_read/write
  ocfs2/dlm: clear refmap bit of recovery lock while doing local recovery cleanup
  um: asm/page.h: remove the pte_high member from struct pte_t
  mm, hugetlb: don't require CMA for runtime gigantic pages
  mm/hugetlb: fix gigantic page initialization/allocation
  mm: downgrade VM_BUG in isolate_lru_page() to warning
  mempolicy: do not try to queue pages from !vma_migratable()
  mm, vmstat: fix wrong WQ sleep when memory reclaim doesn't make any progress
  vmstat: make vmstat_update deferrable
  mm, vmstat: make quiet_vmstat lighter
  mm/Kconfig: correct description of DEFERRED_STRUCT_PAGE_INIT
  memblock: don't mark memblock_phys_mem_size() as __init
  dump_stack: avoid potential deadlocks
  mm: validate_mm browse_rb SMP race condition
  m32r: fix build failure due to SMP and MMU
  ...

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph...
Linus Torvalds [Sat, 6 Feb 2016 03:52:57 +0000 (19:52 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/sage/ceph-client

Pull Ceph fixes from Sage Weil:
 "We have a few wire protocol compatibility fixes, ports of a few recent
  CRUSH mapping changes, and a couple error path fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  libceph: MOSDOpReply v7 encoding
  libceph: advertise support for TUNABLES5
  crush: decode and initialize chooseleaf_stable
  crush: add chooseleaf_stable tunable
  crush: ensure take bucket value is valid
  crush: ensure bucket id is valid before indexing buckets array
  ceph: fix snap context leak in error path
  ceph: checking for IS_ERR instead of NULL

8 years agoMerge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Linus Torvalds [Sat, 6 Feb 2016 03:38:15 +0000 (19:38 -0800)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux

Pull drm fixes from Dave Airlie:
 "Fixes all over the place:

   - amdkfd: two static checker fixes
   - mst: a bunch of static checker and spec/hw interaction fixes
   - amdgpu: fix Iceland hw properly, and some fiji bugs, along with
     some write-combining fixes.
   - exynos: some regression fixes
   - adv7511: fix some EDID reading issues"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (38 commits)
  drm/dp/mst: deallocate payload on port destruction
  drm/dp/mst: Reverse order of MST enable and clearing VC payload table.
  drm/dp/mst: move GUID storage from mgr, port to only mst branch
  drm/dp/mst: change MST detection scheme
  drm/dp/mst: Calculate MST PBN with 31.32 fixed point
  drm: Add drm_fixp_from_fraction and drm_fixp2int_ceil
  drm/mst: Add range check for max_payloads during init
  drm/mst: Don't ignore the MST PBN self-test result
  drm: fix missing reference counting decrease
  drm/amdgpu: disable uvd and vce clockgating on Fiji
  drm/amdgpu: remove exp hardware support from iceland
  drm/amdgpu: load MEC ucode manually on iceland
  drm/amdgpu: don't load MEC2 on topaz
  drm/amdgpu: drop topaz support from gmc8 module
  drm/amdgpu: pull topaz gmc bits into gmc_v7
  drm/amdgpu: The VI specific EXE bit should only apply to GMC v8.0 above
  drm/amdgpu: iceland use CI based MC IP
  drm/amdgpu: move gmc7 support out of CIK dependency
  drm/amdgpu/gfx7: enable cp inst/reg error interrupts
  drm/amdgpu/gfx8: enable cp inst/reg error interrupts
  ...

8 years agoMerge tag 'pm+acpi-4.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael...
Linus Torvalds [Sat, 6 Feb 2016 02:11:23 +0000 (18:11 -0800)]
Merge tag 'pm+acpi-4.5-rc3' of git://git./linux/kernel/git/rafael/linux-pm

Pull power management and ACPI fixes from Rafael Wysocki:
 "These are: a fix for a recently introduced false-positive warnings
  about PM domain pointers being changed inappropriately (harmless but
  annoying), an MCH size workaround quirk for one more platform, a
  compiler warning fix (generic power domains framework), an ACPI LPSS
  (Intel SoCs) driver fixup and a cleanup of the ACPI CPPC core code.

  Specifics:

   - PM core fix to avoid false-positive warnings generated when the
     pm_domain field is cleared for a device that appears to be bound to
     a driver (Rafael Wysocki).

   - New MCH size workaround quirk for Intel Haswell-ULT (Josh Boyer).

   - Fix for an "unused function" compiler warning in the generic power
     domains framework (Ulf Hansson).

   - Fixup for the ACPI driver for Intel SoCs (acpi-lpss) to set the PM
     domain pointer of a device properly in one place that was
     overlooked by a recent PM core update (Andy Shevchenko).

   - Removal of a redundant function declaration in the ACPI CPPC core
     code (Timur Tabi)"

* tag 'pm+acpi-4.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM: Avoid false-positive warnings in dev_pm_domain_set()
  PM / Domains: Silence compiler warning for an unused function
  ACPI / CPPC: remove redundant mbox_send_message() declaration
  ACPI / LPSS: set PM domain via helper setter
  PNP: Add Haswell-ULT to Intel MCH size workaround

8 years agoepoll: restrict EPOLLEXCLUSIVE to POLLIN and POLLOUT
Jason Baron [Fri, 5 Feb 2016 23:37:04 +0000 (15:37 -0800)]
epoll: restrict EPOLLEXCLUSIVE to POLLIN and POLLOUT

In the current implementation of the EPOLLEXCLUSIVE flag (added for
4.5-rc1), if epoll waiters create different POLL* sets and register them
as exclusive against the same target fd, the current implementation will
stop waking any further waiters once it finds the first idle waiter.
This means that waiters could miss wakeups in certain cases.

For example, when we wake up a pipe for reading we do:
wake_up_interruptible_sync_poll(&pipe->wait, POLLIN | POLLRDNORM); So if
one epoll set or epfd is added to pipe p with POLLIN and a second set
epfd2 is added to pipe p with POLLRDNORM, only epfd may receive the
wakeup since the current implementation will stop after it finds any
intersection of events with a waiter that is blocked in epoll_wait().

We could potentially address this by requiring all epoll waiters that
are added to p be required to pass the same set of POLL* events.  IE the
first EPOLL_CTL_ADD that passes EPOLLEXCLUSIVE establishes the set POLL*
flags to be used by any other epfds that are added as EPOLLEXCLUSIVE.
However, I think it might be somewhat confusing interface as we would
have to reference count the number of users for that set, and so
userspace would have to keep track of that count, or we would need a
more involved interface.  It also adds some shared state that we'd have
store somewhere.  I don't think anybody will want to bloat
__wait_queue_head for this.

I think what we could do instead, is to simply restrict EPOLLEXCLUSIVE
such that it can only be specified with EPOLLIN and/or EPOLLOUT.  So
that way if the wakeup includes 'POLLIN' and not 'POLLOUT', we can stop
once we hit the first idle waiter that specifies the EPOLLIN bit, since
any remaining waiters that only have 'POLLOUT' set wouldn't need to be
woken.  Likewise, we can do the same thing if 'POLLOUT' is in the wakeup
bit set and not 'POLLIN'.  If both 'POLLOUT' and 'POLLIN' are set in the
wake bit set (there is at least one example of this I saw in fs/pipe.c),
then we just wake the entire exclusive list.  Having both 'POLLOUT' and
'POLLIN' both set should not be on any performance critical path, so I
think that's ok (in fs/pipe.c its in pipe_release()).  We also continue
to include EPOLLERR and EPOLLHUP by default in any exclusive set.  Thus,
the user can specify EPOLLERR and/or EPOLLHUP but is not required to do
so.

Since epoll waiters may be interested in other events as well besides
EPOLLIN, EPOLLOUT, EPOLLERR and EPOLLHUP, these can still be added by
doing a 'dup' call on the target fd and adding that as one normally
would with EPOLL_CTL_ADD.  Since I think that the POLLIN and POLLOUT
events are what we are interest in balancing, I think that the 'dup'
thing could perhaps be added to only one of the waiter threads.
However, I think that EPOLLIN, EPOLLOUT, EPOLLERR and EPOLLHUP should be
sufficient for the majority of use-cases.

Since EPOLLEXCLUSIVE is intended to be used with a target fd shared
among multiple epfds, where between 1 and n of the epfds may receive an
event, it does not satisfy the semantics of EPOLLONESHOT where only 1
epfd would get an event.  Thus, it is not allowed to be specified in
conjunction with EPOLLEXCLUSIVE.

EPOLL_CTL_MOD is also not allowed if the fd was previously added as
EPOLLEXCLUSIVE.  It seems with the limited number of flags to not be as
interesting, but this could be relaxed at some further point.

Signed-off-by: Jason Baron <jbaron@akamai.com>
Tested-by: Madars Vitolins <m@silodev.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Eric Wong <normalperson@yhbt.net>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Hagen Paul Pfeifer <hagen@jauu.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoradix-tree: fix oops after radix_tree_iter_retry
Konstantin Khlebnikov [Fri, 5 Feb 2016 23:37:01 +0000 (15:37 -0800)]
radix-tree: fix oops after radix_tree_iter_retry

Helper radix_tree_iter_retry() resets next_index to the current index.
In following radix_tree_next_slot current chunk size becomes zero.  This
isn't checked and it tries to dereference null pointer in slot.

Tagged iterator is fine because retry happens only at slot 0 where tag
bitmask in iter->tags is filled with single bit.

Fixes: 46437f9a554f ("radix-tree: fix race in gang lookup")
Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Jeremiah Mahler <jmmahler@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoMAINTAINERS: trim the file triggers for ABI/API
Michael Kerrisk (man-pages) [Fri, 5 Feb 2016 23:36:58 +0000 (15:36 -0800)]
MAINTAINERS: trim the file triggers for ABI/API

Commit ea8f8fc8631 ("MAINTAINERS: add linux-api for review of API/ABI
changes") added file triggers for various paths that likely indicated
API/ABI changes.  However, catching all changes in Documentation/ABI/
and include/uapi/ produces a large volume of mail to linux-api, rather
than only API/ABI changes.  Drop those two entries, but leave
include/linux/syscalls.h and kernel/sys_ni.c to catch syscall-related
changes.

[josh@joshtriplett.org: redid changelog]
Signed-off-by: Michael Kerrisk <mtk.man-pages@gmail.com>
Acked-by: Shuah khan <shuahkh@osg.samsung.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agodax: dirty inode only if required
Dmitry Monakhov [Fri, 5 Feb 2016 23:36:55 +0000 (15:36 -0800)]
dax: dirty inode only if required

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agothp: make deferred_split_scan() work again
Kirill A. Shutemov [Fri, 5 Feb 2016 23:36:53 +0000 (15:36 -0800)]
thp: make deferred_split_scan() work again

We need to iterate over split_queue, not local empty list to get
anything split from the shrinker.

Fixes: e3ae19535c66 ("thp: limit number of object to scan on deferred_split_scan()")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm: replace vma_lock_anon_vma with anon_vma_lock_read/write
Konstantin Khlebnikov [Fri, 5 Feb 2016 23:36:50 +0000 (15:36 -0800)]
mm: replace vma_lock_anon_vma with anon_vma_lock_read/write

Sequence vma_lock_anon_vma() - vma_unlock_anon_vma() isn't safe if
anon_vma appeared between lock and unlock.  We have to check anon_vma
first or call anon_vma_prepare() to be sure that it's here.  There are
only few users of these legacy helpers.  Let's get rid of them.

This patch fixes anon_vma lock imbalance in validate_mm().  Write lock
isn't required here, read lock is enough.

And reorders expand_downwards/expand_upwards: security_mmap_addr() and
wrapping-around check don't have to be under anon vma lock.

Link: https://lkml.kernel.org/r/CACT4Y+Y908EjM2z=706dv4rV6dWtxTLK9nFg9_7DhRMLppBo2g@mail.gmail.com
Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoocfs2/dlm: clear refmap bit of recovery lock while doing local recovery cleanup
xuejiufei [Fri, 5 Feb 2016 23:36:47 +0000 (15:36 -0800)]
ocfs2/dlm: clear refmap bit of recovery lock while doing local recovery cleanup

When recovery master down, dlm_do_local_recovery_cleanup() only remove
the $RECOVERY lock owned by dead node, but do not clear the refmap bit.
Which will make umount thread falling in dead loop migrating $RECOVERY
to the dead node.

Signed-off-by: xuejiufei <xuejiufei@huawei.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoum: asm/page.h: remove the pte_high member from struct pte_t
Nicolai Stange [Fri, 5 Feb 2016 23:36:44 +0000 (15:36 -0800)]
um: asm/page.h: remove the pte_high member from struct pte_t

Commit 16da306849d0 ("um: kill pfn_t") introduced a compile warning for
defconfig (SUBARCH=i386):

  arch/um/kernel/skas/mmu.c:38:206:
      warning: right shift count >= width of type [-Wshift-count-overflow]

Aforementioned patch changes the definition of the phys_to_pfn() macro
from

  ((pfn_t) ((p) >> PAGE_SHIFT))

to

  ((p) >> PAGE_SHIFT)

This effectively changes the phys_to_pfn() expansion's type from
unsigned long long to unsigned long.

Through the callchain init_stub_pte() => mk_pte(), the expansion of
phys_to_pfn() is (indirectly) fed into the 'phys' argument of the
pte_set_val(pte, phys, prot) macro, eventually leading to

  (pte).pte_high = (phys) >> 32;

This results in the warning from above.

Since UML only deals with 32 bit addresses, the upper 32 bits from
'phys' used to be always zero anyway.  Also, all page protection flags
defined by UML don't use any bits beyond bit 9.  Since the contents of a
PTE are defined within architecture scope only, the ->pte_high member
can be safely removed.

Remove the ->pte_high member from struct pte_t.
Rename ->pte_low to ->pte.
Adapt the pte helper macros in arch/um/include/asm/page.h.

Noteworthy is the pte_copy() macro where a smp_wmb() gets dropped.  This
write barrier doesn't seem to be paired with any read barrier though and
thus, was useless anyway.

Fixes: 16da306849d0 ("um: kill pfn_t")
Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm, hugetlb: don't require CMA for runtime gigantic pages
Vlastimil Babka [Fri, 5 Feb 2016 23:36:41 +0000 (15:36 -0800)]
mm, hugetlb: don't require CMA for runtime gigantic pages

Commit 944d9fec8d7a ("hugetlb: add support for gigantic page allocation
at runtime") has added the runtime gigantic page allocation via
alloc_contig_range(), making this support available only when CONFIG_CMA
is enabled.  Because it doesn't depend on MIGRATE_CMA pageblocks and the
associated infrastructure, it is possible with few simple adjustments to
require only CONFIG_MEMORY_ISOLATION instead of full CONFIG_CMA.

After this patch, alloc_contig_range() and related functions are
available and used for gigantic pages with just CONFIG_MEMORY_ISOLATION
enabled.  Note CONFIG_CMA selects CONFIG_MEMORY_ISOLATION.  This allows
supporting runtime gigantic pages without the CMA-specific checks in
page allocator fastpaths.

Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm/hugetlb: fix gigantic page initialization/allocation
Mike Kravetz [Fri, 5 Feb 2016 23:36:38 +0000 (15:36 -0800)]
mm/hugetlb: fix gigantic page initialization/allocation

Attempting to preallocate 1G gigantic huge pages at boot time with
"hugepagesz=1G hugepages=1" on the kernel command line will prevent
booting with the following:

  kernel BUG at mm/hugetlb.c:1218!

When mapcount accounting was reworked, the setting of
compound_mapcount_ptr in prep_compound_gigantic_page was overlooked.  As
a result, the validation of mapcount in free_huge_page fails.

The "BUG_ON" checks in free_huge_page were also changed to
"VM_BUG_ON_PAGE" to assist with debugging.

Fixes: 53f9263baba69 ("mm: rework mapcount accounting to enable 4k mapping of THPs")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: David Rientjes <rientjes@google.com>
Tested-by: Vlastimil Babka <vbabka@suse.cz>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm: downgrade VM_BUG in isolate_lru_page() to warning
Kirill A. Shutemov [Fri, 5 Feb 2016 23:36:36 +0000 (15:36 -0800)]
mm: downgrade VM_BUG in isolate_lru_page() to warning

Calling isolate_lru_page() is wrong and shouldn't happen, but it not
nessesary fatal: the page just will not be isolated if it's not on LRU.

Let's downgrade the VM_BUG_ON_PAGE() to WARN_RATELIMIT().

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomempolicy: do not try to queue pages from !vma_migratable()
Kirill A. Shutemov [Fri, 5 Feb 2016 23:36:33 +0000 (15:36 -0800)]
mempolicy: do not try to queue pages from !vma_migratable()

Maybe I miss some point, but I don't see a reason why we try to queue
pages from non migratable VMAs.

This testcase steps on VM_BUG_ON_PAGE() in isolate_lru_page():

    #include <fcntl.h>
    #include <unistd.h>
    #include <stdio.h>
    #include <sys/mman.h>
    #include <numaif.h>

    #define SIZE 0x2000

    int foo;

    int main()
    {
        int fd;
        char *p;
        unsigned long mask = 2;

        fd = open("/dev/sg0", O_RDWR);
        p = mmap(NULL, SIZE, PROT_READ | PROT_WRITE, MAP_PRIVATE, fd, 0);
        /* Faultin pages */
        foo = p[0] + p[0x1000];
        mbind(p, SIZE, MPOL_BIND, &mask, 4, MPOL_MF_MOVE | MPOL_MF_STRICT);
        return 0;
    }

The only case when we can queue pages from such VMA is MPOL_MF_STRICT
plus MPOL_MF_MOVE or MPOL_MF_MOVE_ALL for VMA which has pages on LRU,
but gfp mask is not sutable for migaration (see mapping_gfp_mask() check
in vma_migratable()).  That's looks like a bug to me.

Let's filter out non-migratable vma at start of queue_pages_test_walk()
and go to queue_pages_pte_range() only if MPOL_MF_MOVE or
MPOL_MF_MOVE_ALL flag is set.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm, vmstat: fix wrong WQ sleep when memory reclaim doesn't make any progress
Tetsuo Handa [Fri, 5 Feb 2016 23:36:30 +0000 (15:36 -0800)]
mm, vmstat: fix wrong WQ sleep when memory reclaim doesn't make any progress

Jan Stancek has reported that system occasionally hanging after "oom01"
testcase from LTP triggers OOM.  Guessing from a result that there is a
kworker thread doing memory allocation and the values between "Node 0
Normal free:" and "Node 0 Normal:" differs when hanging, vmstat is not
up-to-date for some reason.

According to commit 373ccbe59270 ("mm, vmstat: allow WQ concurrency to
discover memory reclaim doesn't make any progress"), it meant to force
the kworker thread to take a short sleep, but it by error used
schedule_timeout(1).  We missed that schedule_timeout() in state
TASK_RUNNING doesn't do anything.

Fix it by using schedule_timeout_uninterruptible(1) which forces the
kworker thread to take a short sleep in order to make sure that vmstat
is up-to-date.

Fixes: 373ccbe59270 ("mm, vmstat: allow WQ concurrency to discover memory reclaim doesn't make any progress")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: Jan Stancek <jstancek@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Cristopher Lameter <clameter@sgi.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Arkadiusz Miskiewicz <arekm@maven.pl>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agovmstat: make vmstat_update deferrable
Michal Hocko [Fri, 5 Feb 2016 23:36:27 +0000 (15:36 -0800)]
vmstat: make vmstat_update deferrable

Commit 0eb77e988032 ("vmstat: make vmstat_updater deferrable again and
shut down on idle") made vmstat_shepherd deferrable.  vmstat_update
itself is still useing standard timer which might interrupt idle task.
This is possible because "mm, vmstat: make quiet_vmstat lighter" removed
cancel_delayed_work from the quiet_vmstat.

Change vmstat_work to use DEFERRABLE_WORK to prevent from pointless
wakeups from the idle context.

Acked-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm, vmstat: make quiet_vmstat lighter
Michal Hocko [Fri, 5 Feb 2016 23:36:24 +0000 (15:36 -0800)]
mm, vmstat: make quiet_vmstat lighter

Mike has reported a considerable overhead of refresh_cpu_vm_stats from
the idle entry during pipe test:

    12.89%  [kernel]       [k] refresh_cpu_vm_stats.isra.12
     4.75%  [kernel]       [k] __schedule
     4.70%  [kernel]       [k] mutex_unlock
     3.14%  [kernel]       [k] __switch_to

This is caused by commit 0eb77e988032 ("vmstat: make vmstat_updater
deferrable again and shut down on idle") which has placed quiet_vmstat
into cpu_idle_loop.  The main reason here seems to be that the idle
entry has to get over all zones and perform atomic operations for each
vmstat entry even though there might be no per cpu diffs.  This is a
pointless overhead for _each_ idle entry.

Make sure that quiet_vmstat is as light as possible.

First of all it doesn't make any sense to do any local sync if the
current cpu is already set in oncpu_stat_off because vmstat_update puts
itself there only if there is nothing to do.

Then we can check need_update which should be a cheap way to check for
potential per-cpu diffs and only then do refresh_cpu_vm_stats.

The original patch also did cancel_delayed_work which we are not doing
here.  There are two reasons for that.  Firstly cancel_delayed_work from
idle context will blow up on RT kernels (reported by Mike):

  CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.5.0-rt3 #7
  Hardware name: MEDION MS-7848/MS-7848, BIOS M7848W08.20C 09/23/2013
  Call Trace:
    dump_stack+0x49/0x67
    ___might_sleep+0xf5/0x180
    rt_spin_lock+0x20/0x50
    try_to_grab_pending+0x69/0x240
    cancel_delayed_work+0x26/0xe0
    quiet_vmstat+0x75/0xa0
    cpu_idle_loop+0x38/0x3e0
    cpu_startup_entry+0x13/0x20
    start_secondary+0x114/0x140

And secondly, even on !RT kernels it might add some non trivial overhead
which is not necessary.  Even if the vmstat worker wakes up and preempts
idle then it will be most likely a single shot noop because the stats
were already synced and so it would end up on the oncpu_stat_off anyway.
We just need to teach both vmstat_shepherd and vmstat_update to stop
scheduling the worker if there is nothing to do.

[mgalbraith@suse.de: cancel pending work of the cpu_stat_off CPU]
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Mike Galbraith <umgwanakikbuti@gmail.com>
Acked-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Mike Galbraith <mgalbraith@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm/Kconfig: correct description of DEFERRED_STRUCT_PAGE_INIT
Vlastimil Babka [Fri, 5 Feb 2016 23:36:21 +0000 (15:36 -0800)]
mm/Kconfig: correct description of DEFERRED_STRUCT_PAGE_INIT

The description mentions kswapd threads, while the deferred struct page
initialization is actually done by one-off "pgdatinitX" threads.

Fix the description so that potentially users are not confused about
pgdatinit threads using CPU after boot instead of kswapd.

Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomemblock: don't mark memblock_phys_mem_size() as __init
David Gibson [Fri, 5 Feb 2016 23:36:19 +0000 (15:36 -0800)]
memblock: don't mark memblock_phys_mem_size() as __init

At the moment memblock_phys_mem_size() is marked as __init, and so is
discarded after boot.  This is different from most of the memblock
functions which are marked __init_memblock, and are only discarded after
boot if memory hotplug is not configured.

To allow for upcoming code which will need memblock_phys_mem_size() in
the hotplug path, change it from __init to __init_memblock.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agodump_stack: avoid potential deadlocks
Eric Dumazet [Fri, 5 Feb 2016 23:36:16 +0000 (15:36 -0800)]
dump_stack: avoid potential deadlocks

Some servers experienced fatal deadlocks because of a combination of
bugs, leading to multiple cpus calling dump_stack().

The checksumming bug was fixed in commit 34ae6a1aa054 ("ipv6: update
skb->csum when CE mark is propagated").

The second problem is a faulty locking in dump_stack()

CPU1 runs in process context and calls dump_stack(), grabs dump_lock.

   CPU2 receives a TCP packet under softirq, grabs socket spinlock, and
   call dump_stack() from netdev_rx_csum_fault().

   dump_stack() spins on atomic_cmpxchg(&dump_lock, -1, 2), since
   dump_lock is owned by CPU1

While dumping its stack, CPU1 is interrupted by a softirq, and happens
to process a packet for the TCP socket locked by CPU2.

CPU1 spins forever in spin_lock() : deadlock

Stack trace on CPU1 looked like :

    NMI backtrace for cpu 1
    RIP: _raw_spin_lock+0x25/0x30
    ...
    Call Trace:
      <IRQ>
      tcp_v6_rcv+0x243/0x620
      ip6_input_finish+0x11f/0x330
      ip6_input+0x38/0x40
      ip6_rcv_finish+0x3c/0x90
      ipv6_rcv+0x2a9/0x500
      process_backlog+0x461/0xaa0
      net_rx_action+0x147/0x430
      __do_softirq+0x167/0x2d0
      call_softirq+0x1c/0x30
      do_softirq+0x3f/0x80
      irq_exit+0x6e/0xc0
      smp_call_function_single_interrupt+0x35/0x40
      call_function_single_interrupt+0x6a/0x70
      <EOI>
      printk+0x4d/0x4f
      printk_address+0x31/0x33
      print_trace_address+0x33/0x3c
      print_context_stack+0x7f/0x119
      dump_trace+0x26b/0x28e
      show_trace_log_lvl+0x4f/0x5c
      show_stack_log_lvl+0x104/0x113
      show_stack+0x42/0x44
      dump_stack+0x46/0x58
      netdev_rx_csum_fault+0x38/0x3c
      __skb_checksum_complete_head+0x6e/0x80
      __skb_checksum_complete+0x11/0x20
      tcp_rcv_established+0x2bd5/0x2fd0
      tcp_v6_do_rcv+0x13c/0x620
      sk_backlog_rcv+0x15/0x30
      release_sock+0xd2/0x150
      tcp_recvmsg+0x1c1/0xfc0
      inet_recvmsg+0x7d/0x90
      sock_recvmsg+0xaf/0xe0
      ___sys_recvmsg+0x111/0x3b0
      SyS_recvmsg+0x5c/0xb0
      system_call_fastpath+0x16/0x1b

Fixes: b58d977432c8 ("dump_stack: serialize the output from dump_stack()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Alex Thorlton <athorlton@sgi.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm: validate_mm browse_rb SMP race condition
Andrea Arcangeli [Fri, 5 Feb 2016 23:36:13 +0000 (15:36 -0800)]
mm: validate_mm browse_rb SMP race condition

The mmap_sem for reading in validate_mm called from expand_stack is not
enough to prevent the argumented rbtree rb_subtree_gap information to
change from under us because expand_stack may be running from other
threads concurrently which will hold the mmap_sem for reading too.

The argumented rbtree is updated with vma_gap_update under the
page_table_lock so use it in browse_rb() too to avoid false positives.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agom32r: fix build failure due to SMP and MMU
Sudip Mukherjee [Fri, 5 Feb 2016 23:36:10 +0000 (15:36 -0800)]
m32r: fix build failure due to SMP and MMU

One of the randconfig build failed with the error:

  arch/m32r/kernel/smp.c: In function 'smp_flush_tlb_mm':
  arch/m32r/kernel/smp.c:283:20: error: subscripted value is neither array nor pointer nor vector
    mmc = &mm->context[cpu_id];
                      ^
  arch/m32r/kernel/smp.c: In function 'smp_flush_tlb_page':
  arch/m32r/kernel/smp.c:353:20: error: subscripted value is neither array nor pointer nor vector
    mmc = &mm->context[cpu_id];
                      ^
  arch/m32r/kernel/smp.c: In function 'smp_invalidate_interrupt':
  arch/m32r/kernel/smp.c:479:41: error: subscripted value is neither array nor pointer nor vector
    unsigned long *mmc = &flush_mm->context[cpu_id];

It turned out that CONFIG_SMP was defined but CONFIG_MMU was not
defined.  But arch/m32r/include/asm/mmu.h only defines mm_context_t as
an array when both CONFIG_SMP and CONFIG_MMU are defined.  And
arch/m32r/kernel/smp.c is always using context as an array.  So without
MMU SMP can not work.

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoblock: fix pfn_mkwrite() DAX fault handler
Ross Zwisler [Fri, 5 Feb 2016 23:36:08 +0000 (15:36 -0800)]
block: fix pfn_mkwrite() DAX fault handler

Previously the pfn_mkwrite() fault handler for raw block devices called
bldev_dax_fault() -> __dax_fault() to do a full DAX page fault.

Really what the pfn_mkwrite() fault handler needs to do is call
dax_pfn_mkwrite() to make sure that the radix tree entry for the given
PTE is marked as dirty so that a follow-up fsync or msync call will
flush it durably to media.

Fixes: 5a023cdba50c ("block: enable dax for raw block devices")
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agosignals: avoid random wakeups in sigsuspend()
Sasha Levin [Fri, 5 Feb 2016 23:36:05 +0000 (15:36 -0800)]
signals: avoid random wakeups in sigsuspend()

A random wakeup can get us out of sigsuspend() without TIF_SIGPENDING
being set.

Avoid that by making sure we were signaled, like sys_pause() does.

Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>