Ursula Braun [Mon, 21 Oct 2019 14:13:09 +0000 (16:13 +0200)]
net/smc: terminate link group without holding lgr lock
When a link group is to be terminated, it is sufficient to hold
the lgr lock when unlinking the link group from its list.
Move the lock-protected link group unlinking into smc_lgr_terminate().
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Ursula Braun [Mon, 21 Oct 2019 14:13:08 +0000 (16:13 +0200)]
net/smc: cancel send and receive for terminated socket
The resources for a terminated socket are being cleaned up.
This patch makes sure
* no more data is received for an actively terminated socket
* no more data is sent for an actively or passively terminated socket
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Jakub Kicinski [Tue, 22 Oct 2019 17:31:54 +0000 (10:31 -0700)]
Merge branch 'mlxsw-core-extend-qsfp-eeprom-size'
Ido Schimmel says:
====================
Vadim says:
This patch set extends the size of QSFP EEPROM for the cable types
SSF-8436 and SFF-8636 from 256 bytes to 640 bytes. This allows ethtool
to show correct information for these cable types (more details below).
Patch #1 adds a macro that computes the EEPROM page number from the
provided offset specified in the request.
Patch #2 teaches the driver to access the information stored in the
upper pages of the QSFP memory map.
Details and examples:
SFF-8436 specification defines pages 0, 1, 2 and 3. Page 0 contains
lower memory page offsets (from 0x00 to 0x7f) and upper page offsets
(from 0x80 to 0xfe). Upper pages 1, 2 and 3 are optional and can be
empty.
Page 1 is provided if upper page 0 byte 0xc3 bit 6 is set.
Page 2 is provided if upper page 0 byte 0xc3 bit 7 is set.
Page 3 is provided if lower page 0 byte 0x02 bit 2 is cleared.
Offset 0xc3 for the upper page is provided as 0x43 = 0xc3 - 0x80.
As a result of exposing 256 bytes only, ethtool shows wrong information
for pages 1, 2 and 3. In the below hex dump from ethtool for a cable
compliant to SFF-8636 specification, it can be seen that EEPROM of this
device contains optical diagnostic page (lower page 0 byte 0x02 bit 2 is
cleared), but it is not exposed, as the length defined for this type is
256 bytes.
$ ethtool -m sfp42 hex on
Offset Values
------ ------
0x0000: 11 07 00 ff 00 ff 00 00 00 55 55 00 00 00 00 00
0x0010: 00 00 00 00 00 00 2a 90 00 00 82 ae 00 00 00 00
0x0020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0050: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00
0x0060: 00 00 ff 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0080: 11 8c 0c 80 00 00 00 00 00 00 00 05 ff 00 00 23
0x0090: 00 00 32 00 4d 65 6c 6c 61 6e 6f 78 20 20 20 20
0x00a0: 20 20 20 20 00 00 02 c9 4d 4d 41 31 42 30 30 2d
0x00b0: 53 53 31 20 20 20 20 20 41 32 42 68 0b b8 46 05
0x00c0: 02 07 f5 9e 4d 54 31 38 33 34 46 54 30 33 38 34
0x00d0: 36 20 20 20 31 38 30 37 30 33 00 00 0c 10 67 c2
0x00e0: 38 32 36 46 4d 41 32 32 36 49 30 31 31 35 20 20
0x00f0: 00 00 00 00 00 00 00 00 00 00 01 00 0e 00 00 00
After changing the length returned by get_module_info() callback from
256 bytes to 640 bytes, the upper pages 1, 2 and 3 are exposed by
ethtool. In the below hex dump from the same cable it can be seen that
the optical diagnostic page (page 3, from offset 0x0200) has non-zero
data.
$ ethtool -m sfp42 hex on
Offset Values
------ ------
0x0000: 11 07 00 ff 00 ff 00 00 00 55 55 00 00 00 00 00
0x0010: 00 00 00 00 00 00 27 79 00 00 82 c5 00 00 00 00
0x0020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0050: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00
0x0060: 00 00 ff 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0080: 11 8c 0c 80 00 00 00 00 00 00 00 05 ff 00 00 23
0x0090: 00 00 32 00 4d 65 6c 6c 61 6e 6f 78 20 20 20 20
0x00a0: 20 20 20 20 00 00 02 c9 4d 4d 41 31 42 30 30 2d
0x00b0: 53 53 31 20 20 20 20 20 41 32 42 68 0b b8 46 05
0x00c0: 02 07 f5 9e 4d 54 31 38 33 34 46 54 30 33 38 34
0x00d0: 36 20 20 20 31 38 30 37 30 33 00 00 0c 10 67 c2
0x00e0: 38 32 36 46 4d 41 32 32 36 49 30 31 31 35 20 20
0x00f0: 00 00 00 00 00 00 00 00 00 00 01 00 0e 00 00 00
0x0100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0110: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0120: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0130: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0140: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0150: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0160: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0170: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0190: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x01a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x01b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x01c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x01d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x01e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x01f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0200: 50 00 f6 00 46 00 00 00 00 00 00 00 00 00 00 00
0x0210: 88 b8 79 18 87 5a 7a 76 00 00 00 00 00 00 00 00
0x0220: 00 00 00 00 00 00 00 00 00 00 18 30 0e 61 60 b7
0x0230: 87 71 01 d3 43 e2 03 a5 10 9a 0a ba 0f a0 0b b8
0x0240: 87 71 02 d4 43 e2 05 a5 00 00 00 00 00 00 00 00
0x0250: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0260: a7 03 00 00 00 00 00 00 00 00 44 44 22 22 11 11
0x0270: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
And 'ethtool -m sfp42' shows the real values for the below fields, while
before it exposed zeros for these fields:
Laser bias current high alarm threshold : 8.500 mA
Laser bias current low alarm threshold : 5.492 mA
Laser bias current high warning threshold : 8.000 mA
Laser bias current low warning threshold : 6.000 mA
Laser output power high alarm threshold : 3.4673 mW / 5.40 dBm
Laser output power low alarm threshold : 0.0724 mW / -11.40 dBm
Laser output power high warning threshold : 1.7378 mW / 2.40 dBm
Laser output power low warning threshold : 0.1445 mW / -8.40 dBm
Module temperature high alarm threshold : 80.00 degrees C / 176.00 F
Module temperature low alarm threshold : -10.00 degrees C / 14.00 F
Module temperature high warning threshold : 70.00 degrees C / 158.00 F
Module temperature low warning threshold : 0.00 degrees C / 32.00 F
Module voltage high alarm threshold : 3.5000 V
Module voltage low alarm threshold : 3.1000 V
====================
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Vadim Pasternak [Mon, 21 Oct 2019 10:30:31 +0000 (13:30 +0300)]
mlxsw: core: Extend QSFP EEPROM size for ethtool
Extend the size of QSFP EEPROM for the cable types SSF8436 and SFF8636
from 256 to 640 bytes in order to expose all the EEPROM pages by
ethtool.
For SFF-8636 and SFF-8436 specifications, the driver exposes 256 bytes
of data for ethtool's get_module_eeprom() callback. This is because the
driver uses the below defines to specify SFF module length in ethtool's
get_module_info() callback:
'ETH_MODULE_SFF_8636_LEN' and 'ETH_MODULE_SFF_8436_LEN' (both are 256).
As a result of exposing 256 bytes only, ethtool shows wrong "zero" info
for pages 1, 2, 3.
The patch changes the length returned by callback for get_module_info()
to the values from the next defines: 'ETH_MODULE_SFF_8636_MAX_LEN' and
'ETH_MODULE_SFF_8436_MAX_LEN' (both are 640) to allow exposing of upper
page 1, 2 and 3.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Vadim Pasternak [Mon, 21 Oct 2019 10:30:30 +0000 (13:30 +0300)]
mlxsw: reg: Add macro for getting QSFP module EEPROM page number
Provide a macro for getting QSFP module EEPROM page number from the
optional upper page number row offset, specified in request.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Juergen Gross [Mon, 21 Oct 2019 05:30:52 +0000 (07:30 +0200)]
xen/netback: cleanup init and deinit code
Do some cleanup of the netback init and deinit code:
- add an omnipotent queue deinit function usable from
xenvif_disconnect_data() and the error path of xenvif_connect_data()
- only install the irq handlers after initializing all relevant items
(especially the kthreads related to the queue)
- there is no need to use get_task_struct() after creating a kthread
and using put_task_struct() again after having stopped it.
- use kthread_run() instead of kthread_create() to spare the call of
wake_up_process().
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Paul Durrant <pdurrant@gmail.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Jakub Kicinski [Tue, 22 Oct 2019 16:46:05 +0000 (09:46 -0700)]
Merge branch 'r8152-phy-firmware'
Hayes Wang says:
====================
Support loading the firmware of the PHY with the type of RTL_FW_PHY_NC.
====================
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Hayes Wang [Mon, 21 Oct 2019 03:41:13 +0000 (11:41 +0800)]
r8152: support firmware of PHY NC for RTL8153A
Support the firmware of PHY NC which is used to fix the issue found
for PHY. Currently, only RTL_VER_04, RTL_VER_05, and RTL_VER_06 need
it.
The order of loading PHY firmware would be
RTL_FW_PHY_START
RTL_FW_PHY_NC
RTL_FW_PHY_STOP
The RTL_FW_PHY_START/RTL_FW_PHY_STOP are used to lock/unlock the PHY,
and set/clear the patch key from the firmware file.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Hayes Wang [Mon, 21 Oct 2019 03:41:12 +0000 (11:41 +0800)]
r8152: move r8153_patch_request forward
Move r8153_patch_request() forward for later patch.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Hayes Wang [Mon, 21 Oct 2019 03:41:11 +0000 (11:41 +0800)]
r8152: add checking fw_offset field of struct fw_mac
Make sure @fw_offset field of struct fw_mac is more than the size
of struct fw_mac.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Hayes Wang [Mon, 21 Oct 2019 03:41:10 +0000 (11:41 +0800)]
r8152: rename fw_type_1 with fw_mac
The struct fw_type_1 is used by MAC only, so rename it to a meaningful one.
Besides, adjust two messages. Replace "load xxx fail" with "check xxx fail"
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Jakub Kicinski [Tue, 22 Oct 2019 03:16:12 +0000 (20:16 -0700)]
Merge branch '1GbE' of git://git./linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:
====================
1GbE Intel Wired LAN Driver Updates 2019-10-21
This series contains updates to e1000e and igc only.
Sasha adds stream control transmission protocol (SCTP) CRC checksum
support for igc. Also added S0ix support to the e1000e driver. Then
added multicast support by adding the address list to the MTA table and
providing the option for IPv6 address for igc. In addition, added
receive checksum support to igc as well. Lastly, cleaned up some code
that was not fully implemented yet for the VLAN filter table array.
v2: Dropped patch 1 & 2 from the original series. Patch 1 is being sent
to 'net' tree as a fix and patch 2 implementation needs to be
re-worked. Updated the patch to add support for S0ix to fix the
reverse Xmas tree issues and made the entry/exit functions void
since they constantly returned success. All based on community
feedback.
v3: Cleaned up patch 4 of the series based on feedback from the
community. Cleaned up a stray comma in a code comment and removed
the 'inline' of a function that would be inlined by the compiler
anyways.
====================
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Davide Caratti [Sat, 19 Oct 2019 16:49:32 +0000 (18:49 +0200)]
net/sched: act_police: re-use tcf_tm_dump()
Use tcf_tm_dump(), instead of an open coded variant (no functional change
in this patch).
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 21 Oct 2019 17:45:03 +0000 (10:45 -0700)]
Merge branch 'phy-marvell-support-downshift-as-PHY-tunable'
Heiner Kallweit says:
====================
net: phy: marvell: support downshift as PHY tunable
So far downshift is implemented for one small use case only and can't
be controlled from userspace. So let's implement this feature properly
as a PHY tunable so that it can be controlled via ethtool.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Sat, 19 Oct 2019 13:58:19 +0000 (15:58 +0200)]
net: phy: marvell: remove superseded function marvell_set_downshift
Instead of superseded function marvell_set_downshift() we can use new
function m88e1111_set_downshift() in m88e1116r_config_init().
For this m88e1116r_config_init() has to be moved in the code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Sat, 19 Oct 2019 13:57:33 +0000 (15:57 +0200)]
net: phy: marvell: support downshift as PHY tunable
So far downshift is implemented for one small use case only and can't
be controlled from userspace. So let's implement this feature properly
as a PHY tunable so that it can be controlled via ethtool.
More Marvell PHY's may support downshift, but I restricted it for now
to the ones where I have the datasheet.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Roman Mashak [Sat, 19 Oct 2019 13:45:53 +0000 (09:45 -0400)]
tc-testing: updated pedit TDC tests
Added test cases for IP header operations:
- set tos/precedence
- add value to tos/precedence
- clear tos/precedence
- invert tos/precedence
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 21 Oct 2019 17:36:08 +0000 (10:36 -0700)]
Merge branch 'mvneta-xdp'
Lorenzo Bianconi says:
====================
add XDP support to mvneta driver
Add XDP support to mvneta driver for devices that rely on software
buffer management. Supported verdicts are:
- XDP_DROP
- XDP_PASS
- XDP_REDIRECT
- XDP_TX
Moreover set ndo_xdp_xmit net_device_ops function pointer in order
to support redirecting from other device (e.g. virtio-net).
Convert mvneta driver to page_pool API.
This series is based on previous work done by Jesper and Ilias.
We will send follow-up patches to reduce DMA-sync operations.
Changes since v4:
- reset page_pool pointer to NULL in mvneta_rxq_drop_pkts and in
mvneta_create_page_pool error path
- move dma sync in mvneta_rx_refill() in patch 2/7
- verify bpf prog pointer in mvneta_xdp_setup to double-check if
stop/start is really necessary
- coding style fixes
Changes since v3:
- rename MVNETA_XDP_CONSUMED in MVNETA_XDP_DROPPED
- squash patch 4/8 and patch 3/8
- fix dma sync for XDP_TX verdict
- fix queue_index in xdp_rxq_info_reg
- cosmetics
Changes since v2:
- rely on page_pool_recycle_direct instead of xdp_return_buff for XDP_DROP
- define xdp buffer in mvneta_rx_swbm and avoid default initializations
- use dma_sync_single_for_cpu instead of dma_sync_single_range_for_cpu
- run page_pool_release_page in mvneta_swbm_add_rx_fragment even if
the buffer contains just ETH_FCS
Changes since v1:
- sync dma buffers before refilling hw queues
- fix stats accounting
Changes since RFC:
- implement XDP_TX
- make tx pending buffer list agnostic
- code refactoring
- check if device is running in mvneta_xdp_setup
====================
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lorenzo Bianconi [Sat, 19 Oct 2019 08:13:27 +0000 (10:13 +0200)]
net: mvneta: add XDP_TX support
Implement XDP_TX verdict and ndo_xdp_xmit net_device_ops function
pointer
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lorenzo Bianconi [Sat, 19 Oct 2019 08:13:26 +0000 (10:13 +0200)]
net: mvneta: make tx buffer array agnostic
Allow tx buffer array to contain both skb and xdp buffers in order to
enable xdp frame recycling adding XDP_TX verdict support
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lorenzo Bianconi [Sat, 19 Oct 2019 08:13:25 +0000 (10:13 +0200)]
net: mvneta: move header prefetch in mvneta_swbm_rx_frame
Move data buffer prefetch in mvneta_swbm_rx_frame after
dma_sync_single_range_for_cpu
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lorenzo Bianconi [Sat, 19 Oct 2019 08:13:24 +0000 (10:13 +0200)]
net: mvneta: add basic XDP support
Add basic XDP support to mvneta driver for devices that rely on software
buffer management. Currently supported verdicts are:
- XDP_DROP
- XDP_PASS
- XDP_REDIRECT
- XDP_ABORTED
- iptables drop:
$iptables -t raw -I PREROUTING -p udp --dport 9 -j DROP
$nstat -n && sleep 1 && nstat
IpInReceives 151169 0.0
IpExtInOctets
6953544 0.0
IpExtInNoECTPkts 151165 0.0
- XDP_DROP via xdp1
$./samples/bpf/xdp1 3
proto 0: 421419 pkt/s
proto 0: 421444 pkt/s
proto 0: 421393 pkt/s
proto 0: 421440 pkt/s
proto 0: 421184 pkt/s
Tested-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lorenzo Bianconi [Sat, 19 Oct 2019 08:13:23 +0000 (10:13 +0200)]
net: mvneta: rely on build_skb in mvneta_rx_swbm poll routine
Refactor mvneta_rx_swbm code introducing mvneta_swbm_rx_frame and
mvneta_swbm_add_rx_fragment routines. Rely on build_skb in oreder to
allocate skb since the previous patch introduced buffer recycling using
the page_pool API.
This patch fixes even an issue in the original driver where dma buffers
are accessed before dma sync.
mvneta driver can run on not cache coherent devices so it is
necessary to sync DMA buffers before sending them to the device
in order to avoid memory corruptions. Running perf analysis we can
see a performance cost associated with this DMA-sync (anyway it is
already there in the original driver code). In follow up patches we
will add more logic to reduce DMA-sync as much as possible.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lorenzo Bianconi [Sat, 19 Oct 2019 08:13:22 +0000 (10:13 +0200)]
net: mvneta: introduce page pool API for sw buffer manager
Use the page_pool api for allocations and DMA handling instead of
__dev_alloc_page()/dma_map_page() and free_page()/dma_unmap_page().
Pages are unmapped using page_pool_release_page before packets
go into the network stack.
The page_pool API offers buffer recycling capabilities for XDP but
allocates one page per packet, unless the driver splits and manages
the allocated page.
This is a preliminary patch to add XDP support to mvneta driver
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lorenzo Bianconi [Sat, 19 Oct 2019 08:13:21 +0000 (10:13 +0200)]
net: mvneta: introduce mvneta_update_stats routine
Introduce mvneta_update_stats routine to collect {rx/tx} statistics
(packets and bytes). This is a preliminary patch to add XDP support to
mvneta driver
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sasha Neftin [Thu, 3 Oct 2019 11:47:01 +0000 (14:47 +0300)]
igc: Clean up unused shadow_vfta pointer
VLAN filter table array not implemented yet and shadow_vfta pointer
not used. Clean up the code and remove the unused shadow_vfta pointer.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Sasha Neftin [Thu, 3 Oct 2019 10:43:05 +0000 (13:43 +0300)]
igc: Add Rx checksum support
Extend the socket buffer field process and add Rx checksum functionality
Minor: fix indentation with tab instead of spaces.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Sasha Neftin [Wed, 25 Sep 2019 08:58:53 +0000 (11:58 +0300)]
igc: Add set_rx_mode support
Add multicast addresses list to the MTA table.
Implement basic Rx mode support.
Add option for IPv6 address settings.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Sasha Neftin [Mon, 16 Sep 2019 06:52:40 +0000 (09:52 +0300)]
e1000e: Add support for S0ix
Implement flow for S0ix support. Modern SoCs support S0ix low power
states during idle periods, which are sub-states of ACPI S0 that increase
power saving while supporting an instant-on experience for providing
lower latency that ACPI S0. The S0ix states shut off parts of the SoC
when they are not in use, while still maintaning optimal performance.
This patch add support for S0ix started from an Ice Lake platform.
Suggested-by: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Sasha Neftin [Wed, 11 Sep 2019 08:17:58 +0000 (11:17 +0300)]
igc: Add SCTP CRC checksumming functionality
Add stream control transmission protocol CRC checksum.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
David S. Miller [Mon, 21 Oct 2019 16:22:10 +0000 (09:22 -0700)]
Merge branch 'hns3-next'
Huazhong Tan says:
====================
net: hns3: add some cleanups & optimizations
This patchset includes some cleanups and optimizations for the HNS3
ethernet driver.
[patch 1/8] removes unused and unnecessary structures.
[patch 2/8] uses a ETH_ALEN u8 array to replace two mac_addr_*
field in struct hclge_mac_mgr_tbl_entry_cmd.
[patch 3/8] optimizes the barrier used in the IO path.
[patch 4/8] introduces macro ring_to_netdev() to get netdevive
from struct hns3_enet_ring variable.
[patch 5/8] makes struct hns3_enet_ring to be cacheline aligned
[patch 6/8] adds a minor cleanup for hns3_handle_rx_bd().
[patch 7/8] removes linear data allocating for fraglist SKB.
[patch 8/8] clears hardware error when resetting.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jian Shen [Sat, 19 Oct 2019 08:03:56 +0000 (16:03 +0800)]
net: hns3: log and clear hardware error after reset complete
When device is resetting, the CMDQ service may be stopped until
reset completed. If a new RAS error occurs at this moment, it
will no be able to clear the RAS source. This patch fixes it
by clear the RAS source after reset complete.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yunsheng Lin [Sat, 19 Oct 2019 08:03:55 +0000 (16:03 +0800)]
net: hns3: do not allocate linear data for fraglist skb
Currently, napi_alloc_skb() is used to allocate skb for fraglist
when the head skb is not enough to hold the remaining data, and
the remaining data is added to the frags part of the fraglist skb,
leaving the linear part unused.
So this patch passes length of 0 to allocate fraglist skb with
zero size of linear data.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yunsheng Lin [Sat, 19 Oct 2019 08:03:54 +0000 (16:03 +0800)]
net: hns3: minor cleanup for hns3_handle_rx_bd()
Since commit
e55970950556 ("net: hns3: Add handling of GRO Pkts
not fully RX'ed in NAPI poll"), ring->skb is used to record the
current SKB when processing the RX BD in hns3_handle_rx_bd(),
so the parameter out_skb is unnecessary.
This patch also adjusts the err checking to reduce duplication
in hns3_handle_rx_bd(), and "err == -ENXIO" is rare case, so put
it in the unlikely annotation.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yunsheng Lin [Sat, 19 Oct 2019 08:03:53 +0000 (16:03 +0800)]
net: hns3: make struct hns3_enet_ring cacheline aligned
Since struct hns3_enet_ring is a frequently used in critical data
path, so make it cacheline aligned as struct hns3_enet_tqp_vector.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yunsheng Lin [Sat, 19 Oct 2019 08:03:52 +0000 (16:03 +0800)]
net: hns3: introduce ring_to_netdev() in enet module
There are a few places that need to access the netdev of a ring
through ring->tqp->handle->kinfo.netdev, and ring->tqp is a struct
which both in enet and hclge modules, it is better to use the
struct that is only used in enet module.
This patch adds the ring_to_netdev() to access the netdev of ring
through ring->tqp_vector->napi.dev.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yunsheng Lin [Sat, 19 Oct 2019 08:03:51 +0000 (16:03 +0800)]
net: hns3: minor optimization for barrier in IO path
Currently, the TX and RX ring in a queue is bounded to the
same IRQ, there may be unnecessary barrier op when only one of
the ring need to be processed.
This patch adjusts the location of rmb() in hns3_clean_tx_ring()
and adds a checking in hns3_clean_rx_ring() to avoid unnecessary
barrier op when there is nothing to do for the ring.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guojia Liao [Sat, 19 Oct 2019 08:03:50 +0000 (16:03 +0800)]
net: hns3: optimized MAC address in management table.
mac_addr_hi32 and mac_addr_lo16 are used to store the MAC address
for management table. But using array of mac_addr[ETH_ALEN] would
be more general and not need to care about the big-endian mode of
the CPU.
Signed-off-by: Guojia Liao <liaoguojia@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yunsheng Lin [Sat, 19 Oct 2019 08:03:49 +0000 (16:03 +0800)]
net: hns3: remove struct hns3_nic_ring_data in hns3_enet module
Only the queue_index field in struct hns3_nic_ring_data is
used, other field is unused and unnecessary for hns3 driver,
so this patch removes it and move the queue_index field to
hns3_enet_ring.
This patch also removes an unused struct hns_queue declaration.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 20 Oct 2019 05:51:25 +0000 (22:51 -0700)]
Merge git://git./linux/kernel/git/netdev/net
Several cases of overlapping changes which were for the most
part trivially resolvable.
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sat, 19 Oct 2019 21:09:11 +0000 (17:09 -0400)]
Merge git://git./linux/kernel/git/netdev/net
Pull networking fixes from David Miller:
"I was battling a cold after some recent trips, so quite a bit piled up
meanwhile, sorry about that.
Highlights:
1) Fix fd leak in various bpf selftests, from Brian Vazquez.
2) Fix crash in xsk when device doesn't support some methods, from
Magnus Karlsson.
3) Fix various leaks and use-after-free in rxrpc, from David Howells.
4) Fix several SKB leaks due to confusion of who owns an SKB and who
should release it in the llc code. From Eric Biggers.
5) Kill a bunc of KCSAN warnings in TCP, from Eric Dumazet.
6) Jumbo packets don't work after resume on r8169, as the BIOS resets
the chip into non-jumbo mode during suspend. From Heiner Kallweit.
7) Corrupt L2 header during MPLS push, from Davide Caratti.
8) Prevent possible infinite loop in tc_ctl_action, from Eric
Dumazet.
9) Get register bits right in bcmgenet driver, based upon chip
version. From Florian Fainelli.
10) Fix mutex problems in microchip DSA driver, from Marek Vasut.
11) Cure race between route lookup and invalidation in ipv4, from Wei
Wang.
12) Fix performance regression due to false sharing in 'net'
structure, from Eric Dumazet"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (145 commits)
net: reorder 'struct net' fields to avoid false sharing
net: dsa: fix switch tree list
net: ethernet: dwmac-sun8i: show message only when switching to promisc
net: aquantia: add an error handling in aq_nic_set_multicast_list
net: netem: correct the parent's backlog when corrupted packet was dropped
net: netem: fix error path for corrupted GSO frames
macb: propagate errors when getting optional clocks
xen/netback: fix error path of xenvif_connect_data()
net: hns3: fix mis-counting IRQ vector numbers issue
net: usb: lan78xx: Connect PHY before registering MAC
vsock/virtio: discard packets if credit is not respected
vsock/virtio: send a credit update when buffer size is changed
mlxsw: spectrum_trap: Push Ethernet header before reporting trap
net: ensure correct skb->tstamp in various fragmenters
net: bcmgenet: reset 40nm EPHY on energy detect
net: bcmgenet: soft reset 40nm EPHYs before MAC init
net: phy: bcm7xxx: define soft_reset for 40nm EPHY
net: bcmgenet: don't set phydev->link from MAC
net: Update address for MediaTek ethernet driver in MAINTAINERS
ipv4: fix race condition between route lookup and invalidation
...
Eric Dumazet [Fri, 18 Oct 2019 22:20:05 +0000 (15:20 -0700)]
net: reorder 'struct net' fields to avoid false sharing
Intel test robot reported a ~7% regression on TCP_CRR tests
that they bisected to the cited commit.
Indeed, every time a new TCP socket is created or deleted,
the atomic counter net->count is touched (via get_net(net)
and put_net(net) calls)
So cpus might have to reload a contended cache line in
net_hash_mix(net) calls.
We need to reorder 'struct net' fields to move @hash_mix
in a read mostly cache line.
We move in the first cache line fields that can be
dirtied often.
We probably will have to address in a followup patch
the __randomize_layout that was added in linux-4.13,
since this might break our placement choices.
Fixes:
355b98553789 ("netns: provide pure entropy for net_hash_mix()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Fri, 18 Oct 2019 21:02:46 +0000 (17:02 -0400)]
net: dsa: fix switch tree list
If there are multiple switch trees on the device, only the last one
will be listed, because the arguments of list_add_tail are swapped.
Fixes:
83c0afaec7b7 ("net: dsa: Add new binding implementation")
Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mans Rullgard [Fri, 18 Oct 2019 16:56:58 +0000 (17:56 +0100)]
net: ethernet: dwmac-sun8i: show message only when switching to promisc
Printing the info message every time more than the max number of mac
addresses are requested generates unnecessary log spam. Showing it only
when the hw is not already in promiscous mode is equally informative
without being annoying.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Chenwandun [Fri, 18 Oct 2019 10:20:37 +0000 (18:20 +0800)]
net: aquantia: add an error handling in aq_nic_set_multicast_list
add an error handling in aq_nic_set_multicast_list, it may not
work when hw_multicast_list_set error; and at the same time
it will remove gcc Wunused-but-set-variable warning.
Signed-off-by: Chenwandun <chenwandun@huawei.com>
Reviewed-by: Igor Russkikh <igor.russkikh@aquantia.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 19 Oct 2019 19:12:36 +0000 (12:12 -0700)]
Merge branch 'netem-fix-further-issues-with-packet-corruption'
Jakub Kicinski says:
====================
net: netem: fix further issues with packet corruption
This set is fixing two more issues with the netem packet corruption.
First patch (which was previously posted) avoids NULL pointer dereference
if the first frame gets freed due to allocation or checksum failure.
v2 improves the clarity of the code a little as requested by Cong.
Second patch ensures we don't return SUCCESS if the frame was in fact
dropped. Thanks to this commit message for patch 1 no longer needs the
"this will still break with a single-frame failure" disclaimer.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 18 Oct 2019 16:16:58 +0000 (09:16 -0700)]
net: netem: correct the parent's backlog when corrupted packet was dropped
If packet corruption failed we jump to finish_segs and return
NET_XMIT_SUCCESS. Seeing success will make the parent qdisc
increment its backlog, that's incorrect - we need to return
NET_XMIT_DROP.
Fixes:
6071bd1aa13e ("netem: Segment GSO packets on enqueue")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 18 Oct 2019 16:16:57 +0000 (09:16 -0700)]
net: netem: fix error path for corrupted GSO frames
To corrupt a GSO frame we first perform segmentation. We then
proceed using the first segment instead of the full GSO skb and
requeue the rest of the segments as separate packets.
If there are any issues with processing the first segment we
still want to process the rest, therefore we jump to the
finish_segs label.
Commit
177b8007463c ("net: netem: fix backlog accounting for
corrupted GSO frames") started using the pointer to the first
segment in the "rest of segments processing", but as mentioned
above the first segment may had already been freed at this point.
Backlog corrections for parent qdiscs have to be adjusted.
Fixes:
177b8007463c ("net: netem: fix backlog accounting for corrupted GSO frames")
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Tretter [Fri, 18 Oct 2019 14:11:43 +0000 (16:11 +0200)]
macb: propagate errors when getting optional clocks
The tx_clk, rx_clk, and tsu_clk are optional. Currently the macb driver
marks clock as not available if it receives an error when trying to get
a clock. This is wrong, because a clock controller might return
-EPROBE_DEFER if a clock is not available, but will eventually become
available.
In these cases, the driver would probe successfully but will never be
able to adjust the clocks, because the clocks were not available during
probe, but became available later.
For example, the clock controller for the ZynqMP is implemented in the
PMU firmware and the clocks are only available after the firmware driver
has been probed.
Use devm_clk_get_optional() in instead of devm_clk_get() to get the
optional clock and propagate all errors to the calling function.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Tested-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Juergen Gross [Fri, 18 Oct 2019 07:45:49 +0000 (09:45 +0200)]
xen/netback: fix error path of xenvif_connect_data()
xenvif_connect_data() calls module_put() in case of error. This is
wrong as there is no related module_get().
Remove the superfluous module_put().
Fixes:
279f438e36c0a7 ("xen-netback: Don't destroy the netdev until the vif is shut down")
Cc: <stable@vger.kernel.org> # 3.12
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yonglong Liu [Fri, 18 Oct 2019 03:42:59 +0000 (11:42 +0800)]
net: hns3: fix mis-counting IRQ vector numbers issue
Currently, the num_msi_left means the vector numbers of NIC,
but if the PF supported RoCE, it contains the vector numbers
of NIC and RoCE(Not expected).
This may cause interrupts lost in some case, because of the
NIC module used the vector resources which belongs to RoCE.
This patch adds a new variable num_nic_msi to store the vector
numbers of NIC, and adjust the default TQP numbers and rss_size
according to the value of num_nic_msi.
Fixes:
46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sat, 19 Oct 2019 10:53:59 +0000 (06:53 -0400)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"Rather a lot of fixes, almost all affecting mm/"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (26 commits)
scripts/gdb: fix debugging modules on s390
kernel/events/uprobes.c: only do FOLL_SPLIT_PMD for uprobe register
mm/thp: allow dropping THP from page cache
mm/vmscan.c: support removing arbitrary sized pages from mapping
mm/thp: fix node page state in split_huge_page_to_list()
proc/meminfo: fix output alignment
mm/init-mm.c: include <linux/mman.h> for vm_committed_as_batch
mm/filemap.c: include <linux/ramfs.h> for generic_file_vm_ops definition
mm: include <linux/huge_mm.h> for is_vma_temporary_stack
zram: fix race between backing_dev_show and backing_dev_store
mm/memcontrol: update lruvec counters in mem_cgroup_move_account
ocfs2: fix panic due to ocfs2_wq is null
hugetlbfs: don't access uninitialized memmaps in pfn_range_valid_gigantic()
mm: memblock: do not enforce current limit for memblock_phys* family
mm: memcg: get number of pages on the LRU list in memcgroup base on lru_zone_size
mm/gup: fix a misnamed "write" argument, and a related bug
mm/gup_benchmark: add a missing "w" to getopt string
ocfs2: fix error handling in ocfs2_setattr()
mm: memcg/slab: fix panic in __free_slab() caused by premature memcg pointer release
mm/memunmap: don't access uninitialized memmap in memunmap_pages()
...
Ilya Leoshkevich [Sat, 19 Oct 2019 03:20:43 +0000 (20:20 -0700)]
scripts/gdb: fix debugging modules on s390
Currently lx-symbols assumes that module text is always located at
module->core_layout->base, but s390 uses the following layout:
+------+ <- module->core_layout->base
| GOT |
+------+ <- module->core_layout->base + module->arch->plt_offset
| PLT |
+------+ <- module->core_layout->base + module->arch->plt_offset +
| TEXT | module->arch->plt_size
+------+
Therefore, when trying to debug modules on s390, all the symbol
addresses are skewed by plt_offset + plt_size.
Fix by adding plt_offset + plt_size to module_addr in
load_module_symbols().
Link: http://lkml.kernel.org/r/20191017085917.81791-1-iii@linux.ibm.com
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Song Liu [Sat, 19 Oct 2019 03:20:40 +0000 (20:20 -0700)]
kernel/events/uprobes.c: only do FOLL_SPLIT_PMD for uprobe register
Attaching uprobe to text section in THP splits the PMD mapped page table
into PTE mapped entries. On uprobe detach, we would like to regroup PMD
mapped page table entry to regain performance benefit of THP.
However, the regroup is broken For perf_event based trace_uprobe. This
is because perf_event based trace_uprobe calls uprobe_unregister twice
on close: first in TRACE_REG_PERF_CLOSE, then in
TRACE_REG_PERF_UNREGISTER. The second call will split the PMD mapped
page table entry, which is not the desired behavior.
Fix this by only use FOLL_SPLIT_PMD for uprobe register case.
Add a WARN() to confirm uprobe unregister never work on huge pages, and
abort the operation when this WARN() triggers.
Link: http://lkml.kernel.org/r/20191017164223.2762148-6-songliubraving@fb.com
Fixes:
5a52c9df62b4 ("uprobe: use FOLL_SPLIT_PMD instead of FOLL_SPLIT")
Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kirill A. Shutemov [Sat, 19 Oct 2019 03:20:36 +0000 (20:20 -0700)]
mm/thp: allow dropping THP from page cache
Once a THP is added to the page cache, it cannot be dropped via
/proc/sys/vm/drop_caches. Fix this issue with proper handling in
invalidate_mapping_pages().
Link: http://lkml.kernel.org/r/20191017164223.2762148-5-songliubraving@fb.com
Fixes:
99cb0dbd47a1 ("mm,thp: add read-only THP support for (non-shmem) FS")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Tested-by: Song Liu <songliubraving@fb.com>
Acked-by: Yang Shi <yang.shi@linux.alibaba.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
William Kucharski [Sat, 19 Oct 2019 03:20:33 +0000 (20:20 -0700)]
mm/vmscan.c: support removing arbitrary sized pages from mapping
__remove_mapping() assumes that pages can only be either base pages or
HPAGE_PMD_SIZE. Ask the page what size it is.
Link: http://lkml.kernel.org/r/20191017164223.2762148-4-songliubraving@fb.com
Fixes:
99cb0dbd47a1 ("mm,thp: add read-only THP support for (non-shmem) FS")
Signed-off-by: William Kucharski <william.kucharski@oracle.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Song Liu <songliubraving@fb.com>
Acked-by: Yang Shi <yang.shi@linux.alibaba.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kirill A. Shutemov [Sat, 19 Oct 2019 03:20:30 +0000 (20:20 -0700)]
mm/thp: fix node page state in split_huge_page_to_list()
Make sure split_huge_page_to_list() handles the state of shmem THP and
file THP properly.
Link: http://lkml.kernel.org/r/20191017164223.2762148-3-songliubraving@fb.com
Fixes:
60fbf0ab5da1 ("mm,thp: stats for file backed THP")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Tested-by: Song Liu <songliubraving@fb.com>
Acked-by: Yang Shi <yang.shi@linux.alibaba.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kirill A. Shutemov [Sat, 19 Oct 2019 03:20:27 +0000 (20:20 -0700)]
proc/meminfo: fix output alignment
Patch series "Fixes for THP in page cache", v2.
This patch (of 5):
Add extra space for FileHugePages and FilePmdMapped, so the output is
aligned with other rows.
Link: http://lkml.kernel.org/r/20191017164223.2762148-2-songliubraving@fb.com
Fixes:
60fbf0ab5da1 ("mm,thp: stats for file backed THP")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Tested-by: Song Liu <songliubraving@fb.com>
Acked-by: Yang Shi <yang.shi@linux.alibaba.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ben Dooks (Codethink) [Sat, 19 Oct 2019 03:20:24 +0000 (20:20 -0700)]
mm/init-mm.c: include <linux/mman.h> for vm_committed_as_batch
mm_init.c needs to include <linux/mman.h> for the definition of
vm_committed_as_batch. Fixes the following sparse warning:
mm/mm_init.c:141:5: warning: symbol 'vm_committed_as_batch' was not declared. Should it be static?
Link: http://lkml.kernel.org/r/20191016091509.26708-1-ben.dooks@codethink.co.uk
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ben Dooks [Sat, 19 Oct 2019 03:20:20 +0000 (20:20 -0700)]
mm/filemap.c: include <linux/ramfs.h> for generic_file_vm_ops definition
The generic_file_vm_ops is defined in <linux/ramfs.h> so include it to
fix the following warning:
mm/filemap.c:2717:35: warning: symbol 'generic_file_vm_ops' was not declared. Should it be static?
Link: http://lkml.kernel.org/r/20191008102311.25432-1-ben.dooks@codethink.co.uk
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ben Dooks [Sat, 19 Oct 2019 03:20:17 +0000 (20:20 -0700)]
mm: include <linux/huge_mm.h> for is_vma_temporary_stack
Include <linux/huge_mm.h> for the definition of is_vma_temporary_stack
to fix the following sparse warning:
mm/rmap.c:1673:6: warning: symbol 'is_vma_temporary_stack' was not declared. Should it be static?
Link: http://lkml.kernel.org/r/20191009151155.27763-1-ben.dooks@codethink.co.uk
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Chenwandun [Sat, 19 Oct 2019 03:20:14 +0000 (20:20 -0700)]
zram: fix race between backing_dev_show and backing_dev_store
CPU0: CPU1:
backing_dev_show backing_dev_store
...... ......
file = zram->backing_dev;
down_read(&zram->init_lock); down_read(&zram->init_init_lock)
file_path(file, ...); zram->backing_dev = backing_dev;
up_read(&zram->init_lock); up_read(&zram->init_lock);
gets the value of zram->backing_dev too early in backing_dev_show, which
resultin the value being NULL at the beginning, and not NULL later.
backtrace:
d_path+0xcc/0x174
file_path+0x10/0x18
backing_dev_show+0x40/0xb4
dev_attr_show+0x20/0x54
sysfs_kf_seq_show+0x9c/0x10c
kernfs_seq_show+0x28/0x30
seq_read+0x184/0x488
kernfs_fop_read+0x5c/0x1a4
__vfs_read+0x44/0x128
vfs_read+0xa0/0x138
SyS_read+0x54/0xb4
Link: http://lkml.kernel.org/r/1571046839-16814-1-git-send-email-chenwandun@huawei.com
Signed-off-by: Chenwandun <chenwandun@huawei.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: <stable@vger.kernel.org> [4.14+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Konstantin Khlebnikov [Sat, 19 Oct 2019 03:20:11 +0000 (20:20 -0700)]
mm/memcontrol: update lruvec counters in mem_cgroup_move_account
Mapped, dirty and writeback pages are also counted in per-lruvec stats.
These counters needs update when page is moved between cgroups.
Currently is nobody *consuming* the lruvec versions of these counters and
that there is no user-visible effect.
Link: http://lkml.kernel.org/r/157112699975.7360.1062614888388489788.stgit@buzz
Fixes:
00f3ca2c2d66 ("mm: memcontrol: per-lruvec stats infrastructure")
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yi Li [Sat, 19 Oct 2019 03:20:08 +0000 (20:20 -0700)]
ocfs2: fix panic due to ocfs2_wq is null
mount.ocfs2 failed when reading ocfs2 filesystem superblock encounters
an error. ocfs2_initialize_super() returns before allocating ocfs2_wq.
ocfs2_dismount_volume() triggers the following panic.
Oct 15 16:09:27 cnwarekv-205120 kernel: On-disk corruption discovered.Please run fsck.ocfs2 once the filesystem is unmounted.
Oct 15 16:09:27 cnwarekv-205120 kernel: (mount.ocfs2,22804,44): ocfs2_read_locked_inode:537 ERROR: status = -30
Oct 15 16:09:27 cnwarekv-205120 kernel: (mount.ocfs2,22804,44): ocfs2_init_global_system_inodes:458 ERROR: status = -30
Oct 15 16:09:27 cnwarekv-205120 kernel: (mount.ocfs2,22804,44): ocfs2_init_global_system_inodes:491 ERROR: status = -30
Oct 15 16:09:27 cnwarekv-205120 kernel: (mount.ocfs2,22804,44): ocfs2_initialize_super:2313 ERROR: status = -30
Oct 15 16:09:27 cnwarekv-205120 kernel: (mount.ocfs2,22804,44): ocfs2_fill_super:1033 ERROR: status = -30
------------[ cut here ]------------
Oops: 0002 [#1] SMP NOPTI
CPU: 1 PID: 11753 Comm: mount.ocfs2 Tainted: G E
4.14.148-200.ckv.x86_64 #1
Hardware name: Sugon H320-G30/35N16-US, BIOS 0SSDX017 12/21/2018
task:
ffff967af0520000 task.stack:
ffffa5f05484000
RIP: 0010:mutex_lock+0x19/0x20
Call Trace:
flush_workqueue+0x81/0x460
ocfs2_shutdown_local_alloc+0x47/0x440 [ocfs2]
ocfs2_dismount_volume+0x84/0x400 [ocfs2]
ocfs2_fill_super+0xa4/0x1270 [ocfs2]
? ocfs2_initialize_super.isa.211+0xf20/0xf20 [ocfs2]
mount_bdev+0x17f/0x1c0
mount_fs+0x3a/0x160
Link: http://lkml.kernel.org/r/1571139611-24107-1-git-send-email-yili@winhong.com
Signed-off-by: Yi Li <yilikernel@gmail.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Hildenbrand [Sat, 19 Oct 2019 03:20:05 +0000 (20:20 -0700)]
hugetlbfs: don't access uninitialized memmaps in pfn_range_valid_gigantic()
Uninitialized memmaps contain garbage and in the worst case trigger
kernel BUGs, especially with CONFIG_PAGE_POISONING. They should not get
touched.
Let's make sure that we only consider online memory (managed by the
buddy) that has initialized memmaps. ZONE_DEVICE is not applicable.
page_zone() will call page_to_nid(), which will trigger
VM_BUG_ON_PGFLAGS(PagePoisoned(page), page) with CONFIG_PAGE_POISONING
and CONFIG_DEBUG_VM_PGFLAGS when called on uninitialized memmaps. This
can be the case when an offline memory block (e.g., never onlined) is
spanned by a zone.
Note: As explained by Michal in [1], alloc_contig_range() will verify
the range. So it boils down to the wrong access in this function.
[1] http://lkml.kernel.org/r/
20180423000943.GO17484@dhcp22.suse.cz
Link: http://lkml.kernel.org/r/20191015120717.4858-1-david@redhat.com
Fixes:
f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online") [visible after
d0dc12e86b319]
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Michal Hocko <mhocko@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: <stable@vger.kernel.org> [4.13+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mike Rapoport [Sat, 19 Oct 2019 03:20:01 +0000 (20:20 -0700)]
mm: memblock: do not enforce current limit for memblock_phys* family
Until commit
92d12f9544b7 ("memblock: refactor internal allocation
functions") the maximal address for memblock allocations was forced to
memblock.current_limit only for the allocation functions returning
virtual address. The changes introduced by that commit moved the limit
enforcement into the allocation core and as a result the allocation
functions returning physical address also started to limit allocations
to memblock.current_limit.
This caused breakage of etnaviv GPU driver:
etnaviv etnaviv: bound 130000.gpu (ops gpu_ops)
etnaviv etnaviv: bound 134000.gpu (ops gpu_ops)
etnaviv etnaviv: bound
2204000.gpu (ops gpu_ops)
etnaviv-gpu 130000.gpu: model: GC2000, revision: 5108
etnaviv-gpu 130000.gpu: command buffer outside valid memory window
etnaviv-gpu 134000.gpu: model: GC320, revision: 5007
etnaviv-gpu 134000.gpu: command buffer outside valid memory window
etnaviv-gpu
2204000.gpu: model: GC355, revision: 1215
etnaviv-gpu
2204000.gpu: Ignoring GPU with VG and FE2.0
Restore the behaviour of memblock_phys* family so that these functions
will not enforce memblock.current_limit.
Link: http://lkml.kernel.org/r/1570915861-17633-1-git-send-email-rppt@kernel.org
Fixes:
92d12f9544b7 ("memblock: refactor internal allocation functions")
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reported-by: Adam Ford <aford173@gmail.com>
Tested-by: Adam Ford <aford173@gmail.com> [imx6q-logicpd]
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Honglei Wang [Sat, 19 Oct 2019 03:19:58 +0000 (20:19 -0700)]
mm: memcg: get number of pages on the LRU list in memcgroup base on lru_zone_size
Commit
1a61ab8038e72 ("mm: memcontrol: replace zone summing with
lruvec_page_state()") has made lruvec_page_state to use per-cpu counters
instead of calculating it directly from lru_zone_size with an idea that
this would be more effective.
Tim has reported that this is not really the case for their database
benchmark which is showing an opposite results where lruvec_page_state
is taking up a huge chunk of CPU cycles (about 25% of the system time
which is roughly 7% of total cpu cycles) on 5.3 kernels. The workload
is running on a larger machine (96cpus), it has many cgroups (500) and
it is heavily direct reclaim bound.
Tim Chen said:
: The problem can also be reproduced by running simple multi-threaded
: pmbench benchmark with a fast Optane SSD swap (see profile below).
:
:
: 6.15% 3.08% pmbench [kernel.vmlinux] [k] lruvec_lru_size
: |
: |--3.07%--lruvec_lru_size
: | |
: | |--2.11%--cpumask_next
: | | |
: | | --1.66%--find_next_bit
: | |
: | --0.57%--call_function_interrupt
: | |
: | --0.55%--smp_call_function_interrupt
: |
: |--1.59%--0x441f0fc3d009
: | _ops_rdtsc_init_base_freq
: | access_histogram
: | page_fault
: | __do_page_fault
: | handle_mm_fault
: | __handle_mm_fault
: | |
: | --1.54%--do_swap_page
: | swapin_readahead
: | swap_cluster_readahead
: | |
: | --1.53%--read_swap_cache_async
: | __read_swap_cache_async
: | alloc_pages_vma
: | __alloc_pages_nodemask
: | __alloc_pages_slowpath
: | try_to_free_pages
: | do_try_to_free_pages
: | shrink_node
: | shrink_node_memcg
: | |
: | |--0.77%--lruvec_lru_size
: | |
: | --0.76%--inactive_list_is_low
: | |
: | --0.76%--lruvec_lru_size
: |
: --1.50%--measure_read
: page_fault
: __do_page_fault
: handle_mm_fault
: __handle_mm_fault
: do_swap_page
: swapin_readahead
: swap_cluster_readahead
: |
: --1.48%--read_swap_cache_async
: __read_swap_cache_async
: alloc_pages_vma
: __alloc_pages_nodemask
: __alloc_pages_slowpath
: try_to_free_pages
: do_try_to_free_pages
: shrink_node
: shrink_node_memcg
: |
: |--0.75%--inactive_list_is_low
: | |
: | --0.75%--lruvec_lru_size
: |
: --0.73%--lruvec_lru_size
The likely culprit is the cache traffic the lruvec_page_state_local
generates. Dave Hansen says:
: I was thinking purely of the cache footprint. If it's reading
: pn->lruvec_stat_local->count[idx] is three separate cachelines, so 192
: bytes of cache *96 CPUs = 18k of data, mostly read-only. 1 cgroup would
: be 18k of data for the whole system and the caching would be pretty
: efficient and all 18k would probably survive a tight page fault loop in
: the L1. 500 cgroups would be ~90k of data per CPU thread which doesn't
: fit in the L1 and probably wouldn't survive a tight page fault loop if
: both logical threads were banging on different cgroups.
:
: It's just a theory, but it's why I noted the number of cgroups when I
: initially saw this show up in profiles
Fix the regression by partially reverting the said commit and calculate
the lru size explicitly.
Link: http://lkml.kernel.org/r/20190905071034.16822-1-honglei.wang@oracle.com
Fixes:
1a61ab8038e72 ("mm: memcontrol: replace zone summing with lruvec_page_state()")
Signed-off-by: Honglei Wang <honglei.wang@oracle.com>
Reported-by: Tim Chen <tim.c.chen@linux.intel.com>
Acked-by: Tim Chen <tim.c.chen@linux.intel.com>
Tested-by: Tim Chen <tim.c.chen@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: <stable@vger.kernel.org> [5.2+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
John Hubbard [Sat, 19 Oct 2019 03:19:53 +0000 (20:19 -0700)]
mm/gup: fix a misnamed "write" argument, and a related bug
In several routines, the "flags" argument is incorrectly named "write".
Change it to "flags".
Also, in one place, the misnaming led to an actual bug:
"flags & FOLL_WRITE" is required, rather than just "flags".
(That problem was flagged by krobot, in v1 of this patch.)
Also, change the flags argument from int, to unsigned int.
You can see that this was a simple oversight, because the
calling code passes "flags" to the fifth argument:
gup_pgd_range():
...
if (!gup_huge_pd(__hugepd(pgd_val(pgd)), addr,
PGDIR_SHIFT, next, flags, pages, nr))
...which, until this patch, the callees referred to as "write".
Also, change two lines to avoid checkpatch line length
complaints, and another line to fix another oversight
that checkpatch called out: missing "int" on pdshift.
Link: http://lkml.kernel.org/r/20191014184639.1512873-3-jhubbard@nvidia.com
Fixes:
b798bec4741b ("mm/gup: change write parameter to flags in fast walk")
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reported-by: kbuild test robot <lkp@intel.com>
Suggested-by: Kirill A. Shutemov <kirill@shutemov.name>
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
John Hubbard [Sat, 19 Oct 2019 03:19:50 +0000 (20:19 -0700)]
mm/gup_benchmark: add a missing "w" to getopt string
Even though gup_benchmark.c has code to handle the -w command-line option,
the "w" is not part of the getopt string. It looks as if it has been
missing the whole time.
On my machine, this leads naturally to the following predictable result:
$ sudo ./gup_benchmark -w
./gup_benchmark: invalid option -- 'w'
...which is fixed with this commit.
Link: http://lkml.kernel.org/r/20191014184639.1512873-2-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: kbuild test robot <lkp@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Chengguang Xu [Sat, 19 Oct 2019 03:19:47 +0000 (20:19 -0700)]
ocfs2: fix error handling in ocfs2_setattr()
Should set transfer_to[USRQUOTA/GRPQUOTA] to NULL on error case before
jumping to do dqput().
Link: http://lkml.kernel.org/r/20191010082349.1134-1-cgxu519@mykernel.net
Signed-off-by: Chengguang Xu <cgxu519@mykernel.net>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Roman Gushchin [Sat, 19 Oct 2019 03:19:44 +0000 (20:19 -0700)]
mm: memcg/slab: fix panic in __free_slab() caused by premature memcg pointer release
Karsten reported the following panic in __free_slab() happening on a s390x
machine:
Unable to handle kernel pointer dereference in virtual kernel address space
Failing address:
0000000000000000 TEID:
0000000000000483
Fault in home space mode while using kernel ASCE.
AS:
00000000017d4007 R3:
000000007fbd0007 S:
000000007fbff000 P:
000000000000003d
Oops: 0004 ilc:3 Ý#1¨ PREEMPT SMP
Modules linked in: tcp_diag inet_diag xt_tcpudp ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 ipt_REJECT nf_reject_ipv4 xt_conntrack ip6table_nat ip6table_mangle ip6table_raw ip6table_security iptable_at nf_nat
CPU: 0 PID: 0 Comm: swapper/0 Not tainted
5.3.0-05872-g6133e3e4bada-dirty #14
Hardware name: IBM 2964 NC9 702 (z/VM 6.4.0)
Krnl PSW :
0704d00180000000 00000000003cadb6 (__free_slab+0x686/0x6b0)
R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:1 PM:0 RI:0 EA:3
Krnl GPRS:
00000000f3a32928 0000000000000000 000000007fbf5d00 000000000117c4b8
0000000000000000 000000009e3291c1 0000000000000000 0000000000000000
0000000000000003 0000000000000008 000000002b478b00 000003d080a97600
0000000000000003 0000000000000008 000000002b478b00 000003d080a97600
000000000117ba00 000003e000057db0 00000000003cabcc 000003e000057c78
Krnl Code:
00000000003cada6:
e310a1400004 lg %r1,320(%r10)
00000000003cadac:
c0e50046c286 brasl %r14,ca32b8
#
00000000003cadb2:
a7f4fe36 brc 15,3caa1e
>
00000000003cadb6:
e32060800024 stg %r2,128(%r6)
00000000003cadbc:
a7f4fd9e brc 15,3ca8f8
00000000003cadc0:
c0e50046790c brasl %r14,c99fd8
00000000003cadc6:
a7f4fe2c brc 15,3caa
00000000003cadc6:
a7f4fe2c brc 15,3caa1e
00000000003cadca:
ecb1ffff00d9 aghik %r11,%r1,-1
Call Trace:
(<
00000000003cabcc> __free_slab+0x49c/0x6b0)
<
00000000001f5886> rcu_core+0x5a6/0x7e0
<
0000000000ca2dea> __do_softirq+0xf2/0x5c0
<
0000000000152644> irq_exit+0x104/0x130
<
000000000010d222> do_IRQ+0x9a/0xf0
<
0000000000ca2344> ext_int_handler+0x130/0x134
<
0000000000103648> enabled_wait+0x58/0x128
(<
0000000000103634> enabled_wait+0x44/0x128)
<
0000000000103b00> arch_cpu_idle+0x40/0x58
<
0000000000ca0544> default_idle_call+0x3c/0x68
<
000000000018eaa4> do_idle+0xec/0x1c0
<
000000000018ee0e> cpu_startup_entry+0x36/0x40
<
000000000122df34> arch_call_rest_init+0x5c/0x88
<
0000000000000000> 0x0
INFO: lockdep is turned off.
Last Breaking-Event-Address:
<
00000000003ca8f4> __free_slab+0x1c4/0x6b0
Kernel panic - not syncing: Fatal exception in interrupt
The kernel panics on an attempt to dereference the NULL memcg pointer.
When shutdown_cache() is called from the kmem_cache_destroy() context, a
memcg kmem_cache might have empty slab pages in a partial list, which are
still charged to the memory cgroup.
These pages are released by free_partial() at the beginning of
shutdown_cache(): either directly or by scheduling a RCU-delayed work
(if the kmem_cache has the SLAB_TYPESAFE_BY_RCU flag). The latter case
is when the reported panic can happen: memcg_unlink_cache() is called
immediately after shrinking partial lists, without waiting for scheduled
RCU works. It sets the kmem_cache->memcg_params.memcg pointer to NULL,
and the following attempt to dereference it by __free_slab() from the
RCU work context causes the panic.
To fix the issue, let's postpone the release of the memcg pointer to
destroy_memcg_params(). It's called from a separate work context by
slab_caches_to_rcu_destroy_workfn(), which contains a full RCU barrier.
This guarantees that all scheduled page release RCU works will complete
before the memcg pointer will be zeroed.
Big thanks for Karsten for the perfect report containing all necessary
information, his help with the analysis of the problem and testing of the
fix.
Link: http://lkml.kernel.org/r/20191010160549.1584316-1-guro@fb.com
Fixes:
fb2f2b0adb98 ("mm: memcg/slab: reparent memcg kmem_caches on cgroup removal")
Signed-off-by: Roman Gushchin <guro@fb.com>
Reported-by: Karsten Graul <kgraul@linux.ibm.com>
Tested-by: Karsten Graul <kgraul@linux.ibm.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Karsten Graul <kgraul@linux.ibm.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Aneesh Kumar K.V [Sat, 19 Oct 2019 03:19:39 +0000 (20:19 -0700)]
mm/memunmap: don't access uninitialized memmap in memunmap_pages()
Patch series "mm/memory_hotplug: Shrink zones before removing memory",
v6.
This series fixes the access of uninitialized memmaps when shrinking
zones/nodes and when removing memory. Also, it contains all fixes for
crashes that can be triggered when removing certain namespace using
memunmap_pages() - ZONE_DEVICE, reported by Aneesh.
We stop trying to shrink ZONE_DEVICE, as it's buggy, fixing it would be
more involved (we don't have SECTION_IS_ONLINE as an indicator), and
shrinking is only of limited use (set_zone_contiguous() cannot detect
the ZONE_DEVICE as contiguous).
We continue shrinking !ZONE_DEVICE zones, however, I reduced the amount
of code to a minimum. Shrinking is especially necessary to keep
zone->contiguous set where possible, especially, on memory unplug of
DIMMs at zone boundaries.
--------------------------------------------------------------------------
Zones are now properly shrunk when offlining memory blocks or when
onlining failed. This allows to properly shrink zones on memory unplug
even if the separate memory blocks of a DIMM were onlined to different
zones or re-onlined to a different zone after offlining.
Example:
:/# cat /proc/zoneinfo
Node 1, zone Movable
spanned 0
present 0
managed 0
:/# echo "online_movable" > /sys/devices/system/memory/memory41/state
:/# echo "online_movable" > /sys/devices/system/memory/memory43/state
:/# cat /proc/zoneinfo
Node 1, zone Movable
spanned 98304
present 65536
managed 65536
:/# echo 0 > /sys/devices/system/memory/memory43/online
:/# cat /proc/zoneinfo
Node 1, zone Movable
spanned 32768
present 32768
managed 32768
:/# echo 0 > /sys/devices/system/memory/memory41/online
:/# cat /proc/zoneinfo
Node 1, zone Movable
spanned 0
present 0
managed 0
This patch (of 10):
With an altmap, the memmap falling into the reserved altmap space are not
initialized and, therefore, contain a garbage NID and a garbage zone.
Make sure to read the NID/zone from a memmap that was initialized.
This fixes a kernel crash that is observed when destroying a namespace:
kernel BUG at include/linux/mm.h:1107!
cpu 0x1: Vector: 700 (Program Check) at [
c000000274087890]
pc:
c0000000004b9728: memunmap_pages+0x238/0x340
lr:
c0000000004b9724: memunmap_pages+0x234/0x340
...
pid = 3669, comm = ndctl
kernel BUG at include/linux/mm.h:1107!
devm_action_release+0x30/0x50
release_nodes+0x268/0x2d0
device_release_driver_internal+0x174/0x240
unbind_store+0x13c/0x190
drv_attr_store+0x44/0x60
sysfs_kf_write+0x70/0xa0
kernfs_fop_write+0x1ac/0x290
__vfs_write+0x3c/0x70
vfs_write+0xe4/0x200
ksys_write+0x7c/0x140
system_call+0x5c/0x68
The "page_zone(pfn_to_page(pfn)" was introduced by
69324b8f4833 ("mm,
devm_memremap_pages: add MEMORY_DEVICE_PRIVATE support"), however, I
think we will never have driver reserved memory with
MEMORY_DEVICE_PRIVATE (no altmap AFAIKS).
[david@redhat.com: minimze code changes, rephrase description]
Link: http://lkml.kernel.org/r/20191006085646.5768-2-david@redhat.com
Fixes:
2c2a5af6fed2 ("mm, memory_hotplug: add nid parameter to arch_remove_memory")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Damian Tometzki <damian.tometzki@gmail.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jun Yao <yaojun8558363@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pankaj Gupta <pagupta@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qian Cai <cai@lca.pw>
Cc: Rich Felker <dalias@libc.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Wei Yang <richardw.yang@linux.intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Yu Zhao <yuzhao@google.com>
Cc: <stable@vger.kernel.org> [5.0+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Hildenbrand [Sat, 19 Oct 2019 03:19:33 +0000 (20:19 -0700)]
mm/memory_hotplug: don't access uninitialized memmaps in shrink_pgdat_span()
We might use the nid of memmaps that were never initialized. For
example, if the memmap was poisoned, we will crash the kernel in
pfn_to_nid() right now. Let's use the calculated boundaries of the
separate zones instead. This now also avoids having to iterate over a
whole bunch of subsections again, after shrinking one zone.
Before commit
d0dc12e86b31 ("mm/memory_hotplug: optimize memory
hotplug"), the memmap was initialized to 0 and the node was set to the
right value. After that commit, the node might be garbage.
We'll have to fix shrink_zone_span() next.
Link: http://lkml.kernel.org/r/20191006085646.5768-4-david@redhat.com
Fixes:
f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online") [
d0dc12e86b319]
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Wei Yang <richardw.yang@linux.intel.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Damian Tometzki <damian.tometzki@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jun Yao <yaojun8558363@gmail.com>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Pankaj Gupta <pagupta@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qian Cai <cai@lca.pw>
Cc: Rich Felker <dalias@libc.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Yu Zhao <yuzhao@google.com>
Cc: <stable@vger.kernel.org> [4.13+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Qian Cai [Sat, 19 Oct 2019 03:19:29 +0000 (20:19 -0700)]
mm/page_owner: don't access uninitialized memmaps when reading /proc/pagetypeinfo
Uninitialized memmaps contain garbage and in the worst case trigger
kernel BUGs, especially with CONFIG_PAGE_POISONING. They should not get
touched.
For example, when not onlining a memory block that is spanned by a zone
and reading /proc/pagetypeinfo with CONFIG_DEBUG_VM_PGFLAGS and
CONFIG_PAGE_POISONING, we can trigger a kernel BUG:
:/# echo 1 > /sys/devices/system/memory/memory40/online
:/# echo 1 > /sys/devices/system/memory/memory42/online
:/# cat /proc/pagetypeinfo > test.file
page:
fffff2c585200000 is uninitialized and poisoned
raw:
ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff
raw:
ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff
page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p))
There is not page extension available.
------------[ cut here ]------------
kernel BUG at include/linux/mm.h:1107!
invalid opcode: 0000 [#1] SMP NOPTI
Please note that this change does not affect ZONE_DEVICE, because
pagetypeinfo_showmixedcount_print() is called from
mm/vmstat.c:pagetypeinfo_showmixedcount() only for populated zones, and
ZONE_DEVICE is never populated (zone->present_pages always 0).
[david@redhat.com: move check to outer loop, add comment, rephrase description]
Link: http://lkml.kernel.org/r/20191011140638.8160-1-david@redhat.com
Fixes:
f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online") # visible after
d0dc12e86b319
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Miles Chen <miles.chen@mediatek.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org> [4.13+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joel Colledge [Sat, 19 Oct 2019 03:19:26 +0000 (20:19 -0700)]
scripts/gdb: fix lx-dmesg when CONFIG_PRINTK_CALLER is set
When CONFIG_PRINTK_CALLER is set, struct printk_log contains an
additional member caller_id. This affects the offset of the log text.
Account for this by using the type information from gdb to determine all
the offsets instead of using hardcoded values.
This fixes following error:
(gdb) lx-dmesg
Python Exception <class 'ValueError'> embedded null character:
Error occurred in Python command: embedded null character
The read_u* utility functions now take an offset argument to make them
easier to use.
Link: http://lkml.kernel.org/r/20191011142500.2339-1-joel.colledge@linbit.com
Signed-off-by: Joel Colledge <joel.colledge@linbit.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Hildenbrand [Sat, 19 Oct 2019 03:19:23 +0000 (20:19 -0700)]
mm/memory-failure.c: don't access uninitialized memmaps in memory_failure()
We should check for pfn_to_online_page() to not access uninitialized
memmaps. Reshuffle the code so we don't have to duplicate the error
message.
Link: http://lkml.kernel.org/r/20191009142435.3975-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Fixes:
f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online") [visible after
d0dc12e86b319]
Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: <stable@vger.kernel.org> [4.13+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Hildenbrand [Sat, 19 Oct 2019 03:19:20 +0000 (20:19 -0700)]
fs/proc/page.c: don't access uninitialized memmaps in fs/proc/page.c
There are three places where we access uninitialized memmaps, namely:
- /proc/kpagecount
- /proc/kpageflags
- /proc/kpagecgroup
We have initialized memmaps either when the section is online or when the
page was initialized to the ZONE_DEVICE. Uninitialized memmaps contain
garbage and in the worst case trigger kernel BUGs, especially with
CONFIG_PAGE_POISONING.
For example, not onlining a DIMM during boot and calling /proc/kpagecount
with CONFIG_PAGE_POISONING:
:/# cat /proc/kpagecount > tmp.test
BUG: unable to handle page fault for address:
fffffffffffffffe
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD
114616067 P4D
114616067 PUD
114618067 PMD 0
Oops: 0000 [#1] SMP NOPTI
CPU: 0 PID: 469 Comm: cat Not tainted 5.4.0-rc1-next-
20191004+ #11
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.4
RIP: 0010:kpagecount_read+0xce/0x1e0
Code: e8 09 83 e0 3f 48 0f a3 02 73 2d 4c 89 e7 48 c1 e7 06 48 03 3d ab 51 01 01 74 1d 48 8b 57 08 480
RSP: 0018:
ffffa14e409b7e78 EFLAGS:
00010202
RAX:
fffffffffffffffe RBX:
0000000000020000 RCX:
0000000000000000
RDX:
0000000000000001 RSI:
00007f76b5595000 RDI:
fffff35645000000
RBP:
00007f76b5595000 R08:
0000000000000001 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000000 R12:
0000000000140000
R13:
0000000000020000 R14:
00007f76b5595000 R15:
ffffa14e409b7f08
FS:
00007f76b577d580(0000) GS:
ffff8f41bd400000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
fffffffffffffffe CR3:
0000000078960000 CR4:
00000000000006f0
Call Trace:
proc_reg_read+0x3c/0x60
vfs_read+0xc5/0x180
ksys_read+0x68/0xe0
do_syscall_64+0x5c/0xa0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
For now, let's drop support for ZONE_DEVICE from the three pseudo files
in order to fix this. To distinguish offline memory (with garbage
memmap) from ZONE_DEVICE memory with properly initialized memmaps, we
would have to check get_dev_pagemap() and pfn_zone_device_reserved()
right now. The usage of both (especially, special casing devmem) is
frowned upon and needs to be reworked.
The fundamental issue we have is:
if (pfn_to_online_page(pfn)) {
/* memmap initialized */
} else if (pfn_valid(pfn)) {
/*
* ???
* a) offline memory. memmap garbage.
* b) devmem: memmap initialized to ZONE_DEVICE.
* c) devmem: reserved for driver. memmap garbage.
* (d) devmem: memmap currently initializing - garbage)
*/
}
We'll leave the pfn_zone_device_reserved() check in stable_page_flags()
in place as that function is also used from memory failure. We now no
longer dump information about pages that are not in use anymore -
offline.
Link: http://lkml.kernel.org/r/20191009142435.3975-2-david@redhat.com
Fixes:
f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online") [visible after
d0dc12e86b319]
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Qian Cai <cai@lca.pw>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Toshiki Fukasawa <t-fukasawa@vx.jp.nec.com>
Cc: Pankaj gupta <pagupta@redhat.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Anthony Yznaga <anthony.yznaga@oracle.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: <stable@vger.kernel.org> [4.13+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Hildenbrand [Sat, 19 Oct 2019 03:19:16 +0000 (20:19 -0700)]
drivers/base/memory.c: don't access uninitialized memmaps in soft_offline_page_store()
Uninitialized memmaps contain garbage and in the worst case trigger kernel
BUGs, especially with CONFIG_PAGE_POISONING. They should not get touched.
Right now, when trying to soft-offline a PFN that resides on a memory
block that was never onlined, one gets a misleading error with
CONFIG_PAGE_POISONING:
:/# echo
5637144576 > /sys/devices/system/memory/soft_offline_page
[ 23.097167] soft offline: 0x150000 page already poisoned
But the actual result depends on the garbage in the memmap.
soft_offline_page() can only work with online pages, it returns -EIO in
case of ZONE_DEVICE. Make sure to only forward pages that are online
(iow, managed by the buddy) and, therefore, have an initialized memmap.
Add a check against pfn_to_online_page() and similarly return -EIO.
Link: http://lkml.kernel.org/r/20191010141200.8985-1-david@redhat.com
Fixes:
f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online") [visible after
d0dc12e86b319]
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: <stable@vger.kernel.org> [4.13+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 19 Oct 2019 02:29:36 +0000 (22:29 -0400)]
Merge tag 'for-linus-2019-10-18' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe pull request from Keith that address deadlocks, double resets,
memory leaks, and other regression.
- Fixup elv_support_iosched() for bio based devices (Damien)
- Fixup for the ahci PCS quirk (Dan)
- Socket O_NONBLOCK handling fix for io_uring (me)
- Timeout sequence io_uring fixes (yangerkun)
- MD warning fix for parameter default_layout (Song)
- blkcg activation fixes (Tejun)
- blk-rq-qos node deletion fix (Tejun)
* tag 'for-linus-2019-10-18' of git://git.kernel.dk/linux-block:
nvme-pci: Set the prp2 correctly when using more than 4k page
io_uring: fix logic error in io_timeout
io_uring: fix up O_NONBLOCK handling for sockets
md/raid0: fix warning message for parameter default_layout
libata/ahci: Fix PCS quirk application
blk-rq-qos: fix first node deletion of rq_qos_del()
blkcg: Fix multiple bugs in blkcg_activate_policy()
io_uring: consider the overflow of sequence for timeout req
nvme-tcp: fix possible leakage during error flow
nvmet-loop: fix possible leakage during error flow
block: Fix elv_support_iosched()
nvme-tcp: Initialize sk->sk_ll_usec only with NET_RX_BUSY_POLL
nvme: Wait for reset state when required
nvme: Prevent resets during paused controller state
nvme: Restart request timers in resetting state
nvme: Remove ADMIN_ONLY state
nvme-pci: Free tagset if no IO queues
nvme: retain split access workaround for capability reads
nvme: fix possible deadlock when nvme_update_formats fails
Linus Torvalds [Sat, 19 Oct 2019 02:26:18 +0000 (22:26 -0400)]
Merge tag 'riscv/for-v5.4-rc4' of git://git./linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
"Some RISC-V fixes:
- Fix the virtual memory layout so the fixaddr region doesn't overlap
with other regions. (This was originally intended to go in as part
of an earlier patch, but I inadvertently dropped it during a
rebase)
- Add the DT chosen/stdout-path property to the HiFive Unleashed DT
file. This is so "earlycon" can be specified with no arguments on
the kernel command line, and the correct UART will be automatically
selected.
And two cleanup patches:
- Simplify the code in our breakpoint trap handler.
- Drop a comment in our TLB flush code that has caused some
confusion"
* tag 'riscv/for-v5.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: fix virtual address overlapped in FIXADDR_START and VMEMMAP_START
riscv: tlbflush: remove confusing comment on local_flush_tlb_all()
riscv: dts: HiFive Unleashed: add default chosen/stdout-path
riscv: remove the switch statement in do_trap_break()
Linus Torvalds [Fri, 18 Oct 2019 22:41:16 +0000 (18:41 -0400)]
filldir[64]: remove WARN_ON_ONCE() for bad directory entries
This was always meant to be a temporary thing, just for testing and to
see if it actually ever triggered.
The only thing that reported it was syzbot doing disk image fuzzing, and
then that warning is expected. So let's just remove it before -rc4,
because the extra sanity testing should probably go to -stable, but we
don't want the warning to do so.
Reported-by: syzbot+3031f712c7ad5dd4d926@syzkaller.appspotmail.com
Fixes:
8a23eb804ca4 ("Make filldir[64]() verify the directory entry filename is valid")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 18 Oct 2019 22:30:09 +0000 (18:30 -0400)]
Merge tag 'ceph-for-5.4-rc4' of git://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"A future-proofing decoding fix from Jeff intended for stable and a
patch for a mostly benign race from Dongsheng"
* tag 'ceph-for-5.4-rc4' of git://github.com/ceph/ceph-client:
rbd: cancel lock_dwork if the wait is interrupted
ceph: just skip unrecognized info in ceph_reply_info_extra
Linus Torvalds [Fri, 18 Oct 2019 22:26:07 +0000 (18:26 -0400)]
Merge tag 'for-5.4/dm-fixes' of git://git./linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix DM snapshot deadlock that can occur due to COW throttling
preventing locks from being released.
- Fix DM cache's GFP_NOWAIT allocation failure error paths by switching
to GFP_NOIO.
- Make __hash_find() static in the DM clone target.
* tag 'for-5.4/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm cache: fix bugs when a GFP_NOWAIT allocation fails
dm snapshot: rework COW throttling to fix deadlock
dm snapshot: introduce account_start_copy() and account_end_copy()
dm clone: Make __hash_find static
Linus Torvalds [Fri, 18 Oct 2019 22:23:16 +0000 (18:23 -0400)]
Merge tag 'iommu-fixes-v5.4-rc3' of git://git./linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Fixes for page-table issues on Mali GPUs
- Missing free in an error path for ARM-SMMU
- PASID decoding in the AMD IOMMU Event log code
- Another update for the locking fixes in the AMD IOMMU driver
- Reduce the calls to platform_get_irq() in the IPMMU-VMSA and Rockchip
IOMMUs to get rid of the warning message added to this function
recently
* tag 'iommu-fixes-v5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/amd: Check PM_LEVEL_SIZE() condition in locked section
iommu/amd: Fix incorrect PASID decoding from event log
iommu/ipmmu-vmsa: Only call platform_get_irq() when interrupt is mandatory
iommu/rockchip: Don't use platform_get_irq to implicitly count irqs
iommu/io-pgtable-arm: Support all Mali configurations
iommu/io-pgtable-arm: Correct Mali attributes
iommu/arm-smmu: Free context bitmap in the err path of arm_smmu_init_domain_context
Linus Torvalds [Fri, 18 Oct 2019 22:19:04 +0000 (18:19 -0400)]
Merge tag 'copy-struct-from-user-v5.4-rc4' of gitolite.pub/scm/linux/kernel/git/brauner/linux
Pull usercopy test fixlets from Christian Brauner:
"This contains two improvements for the copy_struct_from_user() tests:
- a coding style change to get rid of the ugly "if ((ret |= test()))"
pointed out when pulling the original patchset.
- avoid a soft lockups when running the usercopy tests on machines
with large page sizes by scanning only a 1024 byte region"
* tag 'copy-struct-from-user-v5.4-rc4' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux:
usercopy: Avoid soft lockups in test_check_nonzero_user()
lib: test_user_copy: style cleanup
David S. Miller [Fri, 18 Oct 2019 20:12:35 +0000 (13:12 -0700)]
Merge branch 'lpc_eth-parse-phy-nodes-from-device-tree'
Alexandre Belloni says:
====================
net: lpc_eth: parse phy nodes from device tree
Allow describing connected phys using device tree. This solves issues finding
the phy on the mdio bus and allows decribing the interrupt line the phy is
possibly connected to.
Changes in v3:
- rebased on net-next
- collected Reviewed-by
Changes in v2:
- move the phy decription in the mdio subnode.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexandre Belloni [Thu, 17 Oct 2019 22:22:31 +0000 (00:22 +0200)]
net: lpc_eth: parse phy nodes from device tree
When connected to a micrel phy, phy_find_first doesn't work properly
because the first phy found is on address 0, the broadcast address but, the
first thing the phy driver is doing is disabling this broadcast address.
The phy is then available only on address 1 but the mdio driver doesn't
know about it.
Instead, register the mdio bus using of_mdiobus_register and try to find
the phy description in device tree before falling back to phy_find_first.
This ultimately also allows to describe the interrupt the phy is connected
to.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexandre Belloni [Thu, 17 Oct 2019 22:22:30 +0000 (00:22 +0200)]
dt-bindings: net: lpc-eth: document optional properties
The Ethernet controller is also an mdio controller, to be able to parse
children (phys for example), and mdio node must be present.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Thu, 17 Oct 2019 19:29:26 +0000 (21:29 +0200)]
net: usb: lan78xx: Connect PHY before registering MAC
As soon as the netdev is registers, the kernel can start using the
interface. If the driver connects the MAC to the PHY after the netdev
is registered, there is a race condition where the interface can be
opened without having the PHY connected.
Change the order to close this race condition.
Fixes:
92571a1aae40 ("lan78xx: Connect phy early")
Reported-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 18 Oct 2019 17:19:43 +0000 (10:19 -0700)]
Merge branch 'vsock-virtio-make-the-credit-mechanism-more-robust'
Stefano Garzarella says:
====================
vsock/virtio: make the credit mechanism more robust
This series makes the credit mechanism implemented in the
virtio-vsock devices more robust.
Patch 1 sends an update to the remote peer when the buf_alloc
change.
Patch 2 prevents a malicious peer (especially the guest) can
consume all the memory of the other peer, discarding packets
when the credit available is not respected.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Stefano Garzarella [Thu, 17 Oct 2019 12:44:03 +0000 (14:44 +0200)]
vsock/virtio: discard packets if credit is not respected
If the remote peer doesn't respect the credit information
(buf_alloc, fwd_cnt), sending more data than it can send,
we should drop the packets to prevent a malicious peer
from using all of our memory.
This is patch follows the VIRTIO spec: "VIRTIO_VSOCK_OP_RW data
packets MUST only be transmitted when the peer has sufficient
free buffer space for the payload"
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stefano Garzarella [Thu, 17 Oct 2019 12:44:02 +0000 (14:44 +0200)]
vsock/virtio: send a credit update when buffer size is changed
When the user application set a new buffer size value, we should
update the remote peer about this change, since it uses this
information to calculate the credit available.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Thu, 17 Oct 2019 07:11:03 +0000 (10:11 +0300)]
mlxsw: spectrum_trap: Push Ethernet header before reporting trap
devlink maintains packets and bytes statistics for each trap. Since
eth_type_trans() was called to set the skb's protocol, the data pointer
no longer points to the start of the packet and the bytes accounting is
off by 14 bytes.
Fix this by pushing the skb's data pointer to the start of the packet.
Fixes:
b5ce611fd96e ("mlxsw: spectrum: Add devlink-trap support")
Reported-by: Alex Kushnarov <alexanderk@mellanox.com>
Tested-by: Alex Kushnarov <alexanderk@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 18 Oct 2019 17:05:37 +0000 (10:05 -0700)]
Merge branch 'selftests-mlxsw-Add-scale-tests-for-Spectrum-2'
Ido Schimmel says:
====================
selftests: mlxsw: Add scale tests for Spectrum-2
This series from Danielle adds two scale tests for the Spectrum-2 ASIC.
The first scale test (patches #1-#4) validates the number of mirroring
sessions (using tc-mirred) that can be supported by the device. As a
preparatory step, patch #1 exposes the maximum number and current usage
of mirroring agents via devlink-resource. This allows us to avoid
hard-coding the limits later in the test.
The second scale test (patch #5) validates the number of tc-flower
filters that can be supported by the device.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Danielle Ratson [Thu, 17 Oct 2019 06:55:18 +0000 (09:55 +0300)]
selftests: mlxsw: Add Spectrum-2 target scale for tc flower scale test
Return the maximum number of tc flower filters that can be offloaded.
Currently, this value corresponds to the number of counters supported by
the driver.
Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Danielle Ratson [Thu, 17 Oct 2019 06:55:17 +0000 (09:55 +0300)]
selftests: mlxsw: Add a resource scale test for Spectrum-2
Add resource_scale test suitable for Spectrum-2.
Invoke the mirror_gre test and check that the advertised scale numbers
are indeed supported.
Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Danielle Ratson [Thu, 17 Oct 2019 06:55:16 +0000 (09:55 +0300)]
selftests: mlxsw: Add Spectrum-2 mirror-to-gretap target scale test
Like in Spectrum, use the number of analyzers taken from the devlink
command.
Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Danielle Ratson [Thu, 17 Oct 2019 06:55:15 +0000 (09:55 +0300)]
selftests: mlxsw: Generalize the parameters of mirror_gre test
Use the number of analyzers taken from the devlink command, instead of
hard-coded value, in order to make the test more generic.
Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Danielle Ratson [Thu, 17 Oct 2019 06:55:14 +0000 (09:55 +0300)]
mlxsw: spectrum: Register switched port analyzers (SPAN) as resource
The switch supports an enhanced switched port analyzer that enables
selecting network traffic for analysis by a network analyzer.
SPAN agents are configured and consumed whenever a tc filter is added
with a mirror action to a new destination. The destination can either be
a physical port (e.g., swp1), a VLAN device or a gretap.
Expose the maximum number of SPAN agents and their current usage to the
user.
Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Thu, 17 Oct 2019 01:00:56 +0000 (18:00 -0700)]
net: ensure correct skb->tstamp in various fragmenters
Thomas found that some forwarded packets would be stuck
in FQ packet scheduler because their skb->tstamp contained
timestamps far in the future.
We thought we addressed this point in commit
8203e2d844d3
("net: clear skb->tstamp in forwarding paths") but there
is still an issue when/if a packet needs to be fragmented.
In order to meet EDT requirements, we have to make sure all
fragments get the original skb->tstamp.
Note that this original skb->tstamp should be zero in
forwarding path, but might have a non zero value in
output path if user decided so.
Fixes:
fb420d5d91c1 ("tcp/fq: move back to CLOCK_MONOTONIC")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Thomas Bartschies <Thomas.Bartschies@cvk.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
projects / linux-2.6-microblaze.git / log