arm64: dts: qcom: sdm845-oneplus: enable flash LED

Both the 6 and 6T feature a dual tone flash, enable it.

Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231001-b4-sdm845-flash-dts-v1-1-275a3abb0b10@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc8280xp-x13s: Use the correct DP PHY compatible

The DP PHY needs different settings when an eDP display is used.
Make sure these apply on the X13s.

FWIW
I could not notice any user-facing change stemming from this commit.

Fixes: f48c70b111b4 ("arm64: dts: qcom: sc8280xp-x13s: enable eDP display")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230929-topic-x13s_edpphy-v1-1-ce59f9eb4226@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8916-*: Fix alphabetic node order

Fix a couple of instances of incorrectly sorted nodes in the MSM8916
boards. They should be ordered alphabetically for consistency.

No functional change.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230921-msm8916-rmem-fixups-v1-3-34d2b6e721cf@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8939-longcheer-l9100: Enable wcnss_mem

Enable &wcnss_mem for msm8939-longcheer-l9100. This is needed now to
have WCNSS working. It was missed when &wcnss_mem was disabled by
default because the patch with the msm8939-longcheer-l9100 device tree
was not applied yet.

Fixes: 0ece6438a8c0 ("arm64: dts: qcom: msm8916/39: Disable unneeded firmware reservations")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: André Apitzsch <git@apitzsch.eu>
Tested-by: André Apitzsch <git@apitzsch.eu>
Link: https://lore.kernel.org/r/20230921-msm8916-rmem-fixups-v1-2-34d2b6e721cf@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8916-samsung-gt5: Enable GPU

Enable the GPU for the msm8916-samsung-gt58 and gt510 tablets now that
they have display panels enabled in the device tree. This was missed
when the GPU was disabled by default because the change was not applied
yet.

Fixes: 0ce5bb825d54 ("arm64: dts: qcom: msm8916/39: Disable GPU by default")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230921-msm8916-rmem-fixups-v1-1-34d2b6e721cf@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: ipq5332: include the GPLL0 as clock provider for mailbox

While the kernel is booting up, APSS clock / CPU clock will be running
at 800MHz with GPLL0 as source. Once the cpufreq driver is available,
APSS PLL will be configured to the rate based on the opp table and the
source also will be changed to APSS_PLL_EARLY. So allow the mailbox to
consume the GPLL0, with this inclusion, CPU Freq correctly reports that
CPU is running at 800MHz rather than 24MHz.

Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230913-gpll_cleanup-v2-11-c8ceb1a37680@quicinc.com
[bjorn: Updated commit message, as requested by Kathiravan]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: ipq9574: include the GPLL0 as clock provider for mailbox

While the kernel is booting up, APSS clock / CPU clock will be running
at 800MHz with GPLL0 as source. Once the cpufreq driver is available,
APSS PLL will be configured to the rate based on the opp table and the
source also will be changed to APSS_PLL_EARLY. So allow the mailbox to
consume the GPLL0, with this inclusion, CPU Freq correctly reports that
CPU is running at 800MHz rather than 24MHz.

Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230913-gpll_cleanup-v2-10-c8ceb1a37680@quicinc.com
[bjorn: Updated commit message, as requested by Kathiravan]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: ipq6018: include the GPLL0 as clock provider for mailbox

While the kernel is booting up, APSS clock / CPU clock will be running
at 800MHz with GPLL0 as source. Once the cpufreq driver is available,
APSS PLL will be configured to the rate based on the opp table and the
source also will be changed to APSS_PLL_EARLY. So allow the mailbox to
consume the GPLL0, with this inclusion, CPU Freq correctly reports that
CPU is running at 800MHz rather than 24MHz.

Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230913-gpll_cleanup-v2-9-c8ceb1a37680@quicinc.com
[bjorn: Updated commit message, as requested by Kathiravan]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: ipq8074: include the GPLL0 as clock provider for mailbox

While the kernel is booting up, APSS clock / CPU clock will be running
at 800MHz with GPLL0 as source. Once the cpufreq driver is available,
APSS PLL will be configured to the rate based on the opp table and the
source also will be changed to APSS_PLL_EARLY. So allow the mailbox to
consume the GPLL0, with this inclusion, CPU Freq correctly reports that
CPU is running at 800MHz rather than 24MHz.

Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230913-gpll_cleanup-v2-8-c8ceb1a37680@quicinc.com
[bjorn: Updated commit message, as requested by Kathiravan]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: ipq9574: populate the opp table based on the eFuse

IPQ95xx SoCs have different OPPs available for the CPU based on
SoC variant. This can be determined from an eFuse register
present in the silicon.

Add support to read the eFuse and populate the OPPs based on it.

Frequency 1.2GHz 1.8GHz 1.5GHz No opp-supported-hw
Limit
------------------------------------------------------------
936000000 1 1 1 1 0xf
1104000000 1 1 1 1 0xf
1200000000 1 1 1 1 0xf
1416000000 0 1 1 1 0x7
1488000000 0 1 1 1 0x7
1800000000 0 1 0 1 0x5
2208000000 0 0 0 1 0x1
-----------------------------------------------------------

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://lore.kernel.org/r/14ab08b7cfd904433ca6065fac798d4f221c9d95.1697781921.git.quic_varada@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: ipq5332: populate the opp table based on the eFuse

IPQ53xx have different OPPs available for the CPU based on
SoC variant. This can be determined through use of an eFuse
register present in the silicon.

Add support to read the eFuse and populate the OPPs based on it.

------------------------------------------------
Frequency BIT2 BIT1 opp-supported-hw
1.1GHz 1.5GHz
------------------------------------------------
1100000000 1 1 0x7
1500000000 0 1 0x3
------------------------------------------------

Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://lore.kernel.org/r/463f01759cedef3121767d2432aa415794036ce1.1697781921.git.quic_varada@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sdm670: add specific cpufreq compatible

The bindings for the CPU frequency scaling driver require a specific
compatible for the SoC. Add the compatible.

Fixes: 0c665213d126 ("arm64: dts: qcom: sdm670: add cpu frequency scaling")
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230816230412.76862-9-mailingradian@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8150: extend the size of the PDC resource

Follow the example of other platforms and extend the PDC resource region
to 0x30000, so that the PDC driver can read the PDC_VERSION register.

Fixes: 397ad94668c1 ("arm64: dts: qcom: sm8150: Add pdc interrupt controller node")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230929-topic-sm8x50-upstream-pdc-ver-v5-2-800111572104@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: ipq5018: add QUP1 SPI controller

Add the required BAM and QUP nodes for the QUP1 SPI controller on IPQ5018.

Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Link: https://lore.kernel.org/r/20231004191303.331055-1-robimarko@gmail.com
[bjorn: Padded address to 8 digits, fixed node sort order]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: qrb4210-rb2: don't force usb peripheral mode

The rb2 only has a single USB controller, it can be switched between a
type-c port and an internal USB hub via a DIP switch. Until dynamic
role switching is available it's preferable to put the USB controller
in host mode so that the type-A ports and ethernet are available.

Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Fixes: eaa53a85748d ("arm64: dts: qcom: qrb4210-rb2: Enable USB node")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20231010-caleb-rb2-host-mode-v1-1-b057d443cd62@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: Enable tsens and thermal for sa8775p SoC

Add tsens and thermal devicetree node for sa8775p SoC.

Signed-off-by: Priyansh Jain <quic_priyjain@quicinc.com>
Link: https://lore.kernel.org/r/20230926085948.23046-3-quic_priyjain@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sa8775p: Add RPMh sleep stats

Add device node for sleep stats driver which provides various
low power mode stats.

Tested-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Raghavendra Kakarla <quic_rkakarla@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230929054805.27847-1-quic_rkakarla@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc7280: Add ports subnodes in usb/dp qmpphy node

Add the USB3+DP Combo QMP PHY port subnodes to facilitate the
description of the connection between the hardware blocks.

Put it in the SoC DTSI to avoid duplication in the device DTs.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20230929-sc7280-qmpphy-ports-v2-1-aae7e9c286b0@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm6375-pdx225: Add USBPHY regulators

To make dtbs_check happy and the software more aware of what's going
on, describe the HSUSB PHY's regulators and tighten up VDDA_PLL to match.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20230927-topic-6375_stuff-v1-4-12243e36b45c@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm6375-pdx225: Enable ATH10K WiFi

Enable the onboard QCA Wi-Fi. HW identifiers for reference:
qmi chip_id 0x320 chip_family 0x4001 board_id 0xff soc_id 0x400e0000

Firmware sources:
/vendor/firmware_mnt/image/wlanmdsp.bin -> qcom/.../wlanmdsp.mbn
/vendor/firmware_mnt/image/bdwlan.bXX [1] -> [2] -> ath10k/.../board-2.bin
[3] -> ath10k/.../firmware-5.bin

Not sure where 3 comes from on the device itself, gotta investigate that..

According to [4], it's called WCN3990_STRAIT.

Enable it and tighten the relevant regulators.

[1] XX = board_id printed when the file is missing or by your downstream
    kernel firmware loader in the dmesg; if XX=ff, use bdwlan.bin

[2] https://github.com/jhugo/linux/blob/5.5rc2_wifi/README
[3] https://github.com/kvalo/ath10k-firmware/blob/master/WCN3990/hw1.0/HL3.1/WLAN.HL.3.1-01040-QCAHLSWMTPLZ-1/firmware-5.bin
[4] https://git.codelinaro.org/clo/la/platform/vendor/qcom-opensource/wlan/qca-wifi-host-cmn/-/blob/LA.VENDOR.1.0.r1-20700-WAIPIO.QSSI13.0/hif/src/hif_hw_version.h#L55

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230927-topic-6375_stuff-v1-3-12243e36b45c@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm6375-pdx225: Enable MSS

Enable the 5G modem on the Sony Xperia 10 IV.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230927-topic-6375_stuff-v1-2-12243e36b45c@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm6375: Add UART1

Add UART1 node, generally used for the Bluetooth module.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20230927-topic-6375_stuff-v1-1-12243e36b45c@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: ipq9574: Enable WPS buttons

Add support for wps buttons on GPIO 37.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Anusha Rao <quic_anusha@quicinc.com>
Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Link: https://lore.kernel.org/r/20230927-common-rdp-v3-2-3d07b3ff6d42@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: ipq9574: Add common RDP dtsi file

Add a dtsi file to include interfaces that are common
across RDPs.

Signed-off-by: Anusha Rao <quic_anusha@quicinc.com>
Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Link: https://lore.kernel.org/r/20230927-common-rdp-v3-1-3d07b3ff6d42@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: ipq5018: Enable USB

Enable USB2 in host mode.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Co-developed-by: Amandeep Singh <quic_amansing@quicinc.com>
Signed-off-by: Amandeep Singh <quic_amansing@quicinc.com>
Signed-off-by: Nitheesh Sekar <quic_nsekar@quicinc.com>
Link: https://lore.kernel.org/r/20230904063635.24975-5-quic_nsekar@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: ipq5018: Add USB related nodes

Add USB phy and controller nodes.

Co-developed-by: Amandeep Singh <quic_amansing@quicinc.com>
Signed-off-by: Amandeep Singh <quic_amansing@quicinc.com>
Signed-off-by: Nitheesh Sekar <quic_nsekar@quicinc.com>
Link: https://lore.kernel.org/r/20230904063635.24975-4-quic_nsekar@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc7280: add TRNG node

The sc7280 SoC has a True Random Number Generator, add the node with
the correct compatible set.

Signed-off-by: Om Prakash Singh <quic_omprsing@quicinc.com>
Link: https://lore.kernel.org/r/20231015193901.2344590-5-quic_omprsing@quicinc.com
[bjorn: Padded address to 8 digits, moved hunk to maintain sort order]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sa8775p: add TRNG node

The sa8775p SoC has a True Random Number Generator, add the node with
the correct compatible set.

Signed-off-by: Om Prakash Singh <quic_omprsing@quicinc.com>
Link: https://lore.kernel.org/r/20231015193901.2344590-4-quic_omprsing@quicinc.com
[bjorn: Padded address to 8 digits, moved hunk to maintain sort order]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8450: add TRNG node

The SM8450 SoC has a True Random Number Generator, add the node with
the correct compatible set.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20231003-topic-sm8550-rng-v4-5-255e4d0ba08e@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8550: add TRNG node

Add the Qualcomm True Random Number Generator node.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20231003-topic-sm8550-rng-v4-4-255e4d0ba08e@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: apq8016-sbc: Add missing ADV7533 regulators

Add the missing regulator supplies to the ADV7533 HDMI bridge to fix
the following dtbs_check warnings. They are all also supplied by
pm8916_l6 so there is no functional difference.

apq8016-sbc.dtb: bridge@39: 'dvdd-supply' is a required property
apq8016-sbc.dtb: bridge@39: 'pvdd-supply' is a required property
apq8016-sbc.dtb: bridge@39: 'a2vdd-supply' is a required property
        from schema display/bridge/adi,adv7533.yaml

Fixes: 28546b095511 ("arm64: dts: apq8016-sbc: Add HDMI display support")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230922-db410c-adv7533-regulators-v1-1-68aba71e529b@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

ARM: dts: qcom: sdx65-mtp: Specify PM7250B SID to use

Now that the pm7250b.dtsi can be configured to be on a different SID, we
also need to specify it for this dts file. Set it to the SID 2/3 like it
was before commit 8e2d56f64572 ("arm64: dts: qcom: pm7250b: make SID
configurable").

Fixes: 8e2d56f64572 ("arm64: dts: qcom: pm7250b: make SID configurable")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20230921-pm7250b-sid-fixup-v1-1-231c1a65471f@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: apq8016-sbc: Add overlay for usb host mode

Due to the presence of the fastboot micro cable in the CI farm,
it causes the hardware to remain in gadget mode instead of host mode.
So it doesn't find the network, which results in failure to mount root
fs via NFS.

Add an overlay dtso file that sets the dr_mode to host, allowing the
USB controllers to work in host mode. With commit 15d16d6dadf6
("kbuild: Add generic rule to apply fdtoverlay"), overlay target can
be used to simplify the build of DTB overlays. It uses fdtoverlay to
merge base device tree with the overlay dtso. apq8016-sbc-usb-host.dtb
file can be used by drm-ci, mesa-ci.

Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Suggested-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: David Heidelberg <david.heidelberg@collabora.com>
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Helen Koike <helen.koike@collabora.com>
Link: https://lore.kernel.org/r/20230911161518.650726-1-vignesh.raman@collabora.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: qcm6490: Add device-tree for Fairphone 5

Add device tree for the Fairphone 5 smartphone which is based on
the QCM6490 SoC.

Supported features are, as of now:
* Bluetooth
* Debug UART
* Display via simplefb
* Flash/torch LED
* Flip cover sensor
* Power & volume buttons
* RTC
* SD card
* USB
* Various plumbing like regulators, i2c, spi, etc

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230919-fp5-initial-v2-7-14bb7cedadf5@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: arm: qcom: Add QCM6490 Fairphone 5

Fairphone 5 is a smartphone based on the QCM6490 SoC.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230919-fp5-initial-v2-6-14bb7cedadf5@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: pm8350c: Add flash led node

Add a node for the led controller found on PM8350C, used for flash and
torch purposes.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20230919-fp5-initial-v2-4-14bb7cedadf5@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: pm7250b: make SID configurable

Like other Qualcomm PMICs the PM7250B can be used on different addresses
on the SPMI bus. Use similar defines like the PMK8350 to make this
possible but skip the ifndef based on maintainer feedback.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230919-fp5-initial-v2-3-14bb7cedadf5@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc7280: Mark some nodes as 'reserved'

With the standard Qualcomm TrustZone setup, components such as lpasscc,
pdc_reset and watchdog shouldn't be touched by Linux. Mark them with
the status 'reserved' and reenable them in the chrome-common dtsi.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20230919-fp5-initial-v2-1-14bb7cedadf5@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8939: Fix iommu local address range

Fix the apps iommu local address space range as per data sheet.

Fixes: 61550c6c156c ("arm64: dts: qcom: Add msm8939 SoC")
Signed-off-by: Gaurav Kohli <quic_gkohli@quicinc.com>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230917140039.25283-1-quic_gkohli@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: ipq5018: indicate that SDI should be disabled

Now that SCM has support for indicating that SDI has been enabled by
default, lets set the property so SCM disables it during probing.

Signed-off-by: Robert Marko <robimarko@gmail.com>
Link: https://lore.kernel.org/r/20230816164641.3371878-4-robimarko@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8976: Fix ipc bit shifts

Update bits to match downstream irq-bitmask values.

Fixes: 0484d3ce0902 ("arm64: dts: qcom: Add DTS for MSM8976 and MSM8956 SoCs")
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Link: https://lore.kernel.org/r/20230812112534.8610-8-a39.skl@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8976: Split lpass region

MSM8976 downstream dts define reloc region which is used by pil-tz
to load both wcnss and lpass, on mainline however we might not be
able to do it and we need separate regions(also validating dts might get
problematic if we had to put memory-region(rproc node) per device).
Luckily it seems size and entry points in firmware headers appears
to be static across multiple devices including Sony Loire platform
and Xiaomi Redmi Note 3 Pro this should let us fit in first ~17MB
Split lpass region(reloc on downstream) into two separate regions.

Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Link: https://lore.kernel.org/r/20230812112534.8610-7-a39.skl@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: pm8150l: Add wled node

WLED is used for controlling the backlight on some boards, add the node
for it.

Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Link: https://lore.kernel.org/r/20230913185514.21840-1-danila@jiaxyga.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sa8775p: enable the inline crypto engine

Add an ICE node to sa8775p SoC description and enable it by adding a
phandle to the UFS node.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230913153529.32777-2-bartosz.golaszewski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8916/39: Fix venus memory size

Both MSM8916 and MSM8939 have unnecessarily large reservations for the
venus firmware for some reason. According to the ELF headers and
downstream [1] 5 MiB is enough. Let's set the minimum size as default.

With the dynamic reserved memory allocations boards can easily override
this if needed, although in practice there does not seem to be any
device with a different venus firmware size.

[1]: https://git.codelinaro.org/clo/la/kernel/msm-3.10/-/blame/LA.BR.1.2.9.1-02310-8x16.0/arch/arm/boot/dts/qcom/msm8939-common.dtsi#L69

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230911-msm8916-rmem-v1-9-b7089ec3e3a1@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8916/39: Move mpss_mem size to boards

The modem firmware size is typically highly device-specific.
The current size of the mpss_mem region in msm8916.dtsi (0x2b00000)
only works for some APQ8016 devices without full-featured modem,
such as the DragonBoard 410c.

The full modem firmware is typically about twice as large (~45 MiB
-> ~90 MiB) but also varies by a few MiB from device to device. Since
these devices are quite memory-constrained nowadays it's important to
minimize the unnecessary memory reservations.

Make it clear that each board needs to specify the necessary mpss_mem
size by replacing the DB410c-specific size in msm8916.dtsi with a
simple comment. &mpss_mem is disabled by default so it's fine to leave
some properties up to the boards if they want to enable it.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230911-msm8916-rmem-v1-8-b7089ec3e3a1@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8916/39: Disable unneeded firmware reservations

Now that we no longer have fixed addresses for the firmware memory
regions, disable them by default and only enable them together with
the actual user in the board DT.

This frees up unnecessary reserved memory for boards that do not use
some of the remoteprocs and allows moving selected device-specific
properties (such as firmware size) to the board-specific DT part in
the next step.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230911-msm8916-rmem-v1-7-b7089ec3e3a1@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8939: Reserve firmware memory dynamically

Follow the example of MSM8916 and reserve the firmware memory regions
dynamically to allow boards to define only the device-specific parts.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230911-msm8916-rmem-v1-6-b7089ec3e3a1@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8916: Reserve MBA memory dynamically

At a first glance the MBA memory region on MSM8916 looks intentionally
placed at the fixed address 0x8ea00000. This is what the ELF headers of
the firmware specify as base address, and the typical Qualcomm-specific
bits suggest the binary is not relocatable.

However, on a closer look this is pointless: Unlike other firmware
images the hardware expects to have the raw ELF image loaded to the MBA
region, including the ELF header (without parsing it at all). This
means that we actually just load the ELF header (not the code!) at
0x8ea00000. The real LOAD segments follow at arbitrary aligned
addresses depending on the structure of the ELF binary.

In practice it looks like we can use an arbitrary 1 MiB-aligned region
for MBA. The downstream/vendor kernel just allocates this dynamically
at an arbitrary (aligned) address.

Drop the pointless fixed address and use the new dynamic reserved
memory mechanism to allocate a region close to the others. This reduces
gaps in the memory map and provides Linux with more contiguous memory.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230911-msm8916-rmem-v1-5-b7089ec3e3a1@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8916: Reserve firmware memory dynamically

Most of the reserved firmware memory on MSM8916 can be relocated when
respecting the required alignment. To avoid having to precompute the
reserved memory regions in every board DT, describe the actual
requirements (size, alignment, alloc-ranges) using the dynamic reserved
memory allocation.

This approach has several advantages:

 1. We can define "templates" for the reserved memory regions in
    msm8916.dtsi and keep only device-specific details in the board DT.
    This is useful for the "mpss" region size for example, which varies
    from device to device. It is no longer necessary to redefine all
    firmware regions to shift their addresses.

 2. When some of the functionality (e.g. WCNSS, Modem, Venus) is not
    enabled or needed for a device, the reserved memory can stay
    disabled, freeing up the unused reservation for Linux.

 3. Devices with special requirements for one of the firmware regions
    are handled automatically. For example, msm8916-longcheer-l8150
    has non-relocatable "wcnss" firmware that must be loaded exactly
    at address 0x8b600000. When this is defined as a static region,
    the other dynamic allocations automatically adjust to a different
    place with suitable alignment.

All in all this approach significantly reduces the boilerplate necessary
to define the different firmware regions, and makes it easier to enable
functionality on the different devices.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230911-msm8916-rmem-v1-4-b7089ec3e3a1@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8916-ufi: Drop gps_mem for now

gps_mem is needed by the modem firmware for GPS to work. However, it is
accessed via QMI memshare [1] which is not available upstream yet.
Until it lands upstream reserving this does not provide any advantage.

[1]: https://lore.kernel.org/linux-arm-msm/20210319172321.22248-1-nikitos.tr@gmail.com/

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20230911-msm8916-rmem-v1-3-b7089ec3e3a1@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8916/39: Disable GPU by default

MSM8916/39 do not need signed GPU firmware so it is generally okay to
have it enabled by default. However, currently the GPU does not work
without also enabling MDSS and it's questionable if someone would
really need it without a display in practice.

For consistency let's follow newer SoCs and disable the GPU by default.
Enable it for all existing devices that already have &mdss enabled.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20230911-msm8916-rmem-v1-2-b7089ec3e3a1@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8916: Disable venus by default

Venus needs firmware that is usually signed with a device-specific key.
There are also devices that might not need it (especially during
bring-up), so let's follow more recent SoCs and disable it by default.

Enable it explicitly for all current devices except msm8916-mtp. That
one has just UART enabled currently so it cannot really benefit from
Venus.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20230911-msm8916-rmem-v1-1-b7089ec3e3a1@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc7180: Add ADSP

sc7180 has an ADSP remoteproc that exclusively controls the audio
hardware on devices that use Qualcomm firmware.

Add it along with the relevant audio services.

Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20230907-sc7180-adsp-rproc-v3-4-6515c3fbe0a3@trvn.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc7180: Add tertiary mi2s pinctrl

Some devices use tertiary mi2s to connect external audio codec.
Add it near the other two i2s pinctrl definitions so the devices don't
have to duplicate it.

Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230907-sc7180-adsp-rproc-v3-3-6515c3fbe0a3@trvn.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

Revert "arm64: dts: qcom: sm8450: Add PRNG"

This reverts commit 76a6dd7bfcbb ("arm64: dts: qcom: sm8450: Add PRNG"),
since the RNG HW on the SM8450 SoC is in fact a True Random Number Generator,
a more appropriate compatible should be instead as reported at [1].

[1] https://lore.kernel.org/all/20230818161720.3644424-1-quic_omprsing@quicinc.com/

Suggested-by: Om Prakash Singh <quic_omprsing@quicinc.com>
Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230828-topic-sm8550-rng-v3-1-7a0678ca7988@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: pm8916: Drop codec reg-names and mclk

Drop the redundant reg-names and mclk from the PM8916 analog codec that
were removed from the DT schema. Having the mclk on the analog codec is
incorrect because only the digital codec consumes it directly.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230718-pm8916-mclk-v1-6-4b4a58b4240a@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sdx75-idp: align RPMh regulator nodes with bindings

Device node names should be generic and bindings expect certain pattern
for RPMh regulator nodes:

  sdx75-idp.dtb: rsc@17a00000: 'pmx75-rpmh-regulators' does not match any of the regexes: '^regulators(-[0-9])?$', 'pinctrl-[0-9]+'

Fixes: 8a2dc39d1043 ("arm64: dts: qcom: sdx75-idp: Add regulator nodes")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230905163103.257412-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm4250-billie2: correct UFS pad supply

The Qualcomm UFS phy switched from dedicated driver to QMP phy driver.
Eventually the old driver was removed in commit 02dca8c981b5 ("phy:
qcom: remove ufs qmp phy driver").  The original driver and its binding
used vddp-ref-clk regulator supply, but the new one did not and left the
supply unused.

The Qualcomm UFS phy bindings were also migrated to newer ones and
dropped support for vddp-ref-clk regulator in commit dc5cb63592bd
("dt-bindings: phy: migrate QMP UFS PHY bindings to
qcom,sc8280xp-qmp-ufs-phy.yaml").

It turns out that this regulator, although with inaccurate name
vddp-ref-clk, is actually needed to provide supply for VDD_PX10 (or
similar, depending on the SoC) used by UFS controller.

Bring back handling of this supply by using more appropriate regulator -
UFS controller host supply.  This also fixes dtbs_check warning:

  sm4250-oneplus-billie2.dtb: phy@4807000: 'vddp-ref-clk-supply' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230905161920.252013-13-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8998-sagit: correct UFS pad supply

The Qualcomm UFS phy switched from dedicated driver to QMP phy driver.
Eventually the old driver was removed in commit 02dca8c981b5 ("phy:
qcom: remove ufs qmp phy driver").  The original driver and its binding
used vddp-ref-clk regulator supply, but the new one did not and left the
supply unused.

The Qualcomm UFS phy bindings were also migrated to newer ones and
dropped support for vddp-ref-clk regulator in commit dc5cb63592bd
("dt-bindings: phy: migrate QMP UFS PHY bindings to
qcom,sc8280xp-qmp-ufs-phy.yaml").

It turns out that this regulator, although with inaccurate name
vddp-ref-clk, is actually needed to provide supply for VDD_PX10 (or
similar, depending on the SoC) used by UFS controller.

Bring back handling of this supply by using more appropriate regulator -
UFS controller host supply.  This also fixes dtbs_check warning:

  msm8998-xiaomi-sagit.dtb: phy@1da7000: 'vddp-ref-clk-supply' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230905161920.252013-12-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8998-oneplus: correct UFS pad supply

The Qualcomm UFS phy switched from dedicated driver to QMP phy driver.
Eventually the old driver was removed in commit 02dca8c981b5 ("phy:
qcom: remove ufs qmp phy driver").  The original driver and its binding
used vddp-ref-clk regulator supply, but the new one did not and left the
supply unused.

The Qualcomm UFS phy bindings were also migrated to newer ones and
dropped support for vddp-ref-clk regulator in commit dc5cb63592bd
("dt-bindings: phy: migrate QMP UFS PHY bindings to
qcom,sc8280xp-qmp-ufs-phy.yaml").

It turns out that this regulator, although with inaccurate name
vddp-ref-clk, is actually needed to provide supply for VDD_PX10 (or
similar, depending on the SoC) used by UFS controller.

Bring back handling of this supply by using more appropriate regulator -
UFS controller host supply.  This also fixes dtbs_check warning:

  msm8998-oneplus-dumpling.dtb: phy@1da7000: 'vddp-ref-clk-supply' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230905161920.252013-11-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8998-mtp: correct UFS pad supply

The Qualcomm UFS phy switched from dedicated driver to QMP phy driver.
Eventually the old driver was removed in commit 02dca8c981b5 ("phy:
qcom: remove ufs qmp phy driver").  The original driver and its binding
used vddp-ref-clk regulator supply, but the new one did not and left the
supply unused.

The Qualcomm UFS phy bindings were also migrated to newer ones and
dropped support for vddp-ref-clk regulator in commit dc5cb63592bd
("dt-bindings: phy: migrate QMP UFS PHY bindings to
qcom,sc8280xp-qmp-ufs-phy.yaml").

It turns out that this regulator, although with inaccurate name
vddp-ref-clk, is actually needed to provide supply for VDD_PX10 (or
similar, depending on the SoC) used by UFS controller.

Bring back handling of this supply by using more appropriate regulator -
UFS controller host supply.  This also fixes dtbs_check warning:

  msm8998-mtp.dtb: phy@1da7000: 'vddp-ref-clk-supply' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230905161920.252013-10-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8998-pro1: correct UFS pad supply

The Qualcomm UFS phy switched from dedicated driver to QMP phy driver.
Eventually the old driver was removed in commit 02dca8c981b5 ("phy:
qcom: remove ufs qmp phy driver").  The original driver and its binding
used vddp-ref-clk regulator supply, but the new one did not and left the
supply unused.

The Qualcomm UFS phy bindings were also migrated to newer ones and
dropped support for vddp-ref-clk regulator in commit dc5cb63592bd
("dt-bindings: phy: migrate QMP UFS PHY bindings to
qcom,sc8280xp-qmp-ufs-phy.yaml").

It turns out that this regulator, although with inaccurate name
vddp-ref-clk, is actually needed to provide supply for VDD_PX10 (or
similar, depending on the SoC) used by UFS controller.

Bring back handling of this supply by using more appropriate regulator -
UFS controller host supply.  This also fixes dtbs_check warning:

  msm8998-fxtec-pro1.dtb: phy@1da7000: 'vddp-ref-clk-supply' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230905161920.252013-9-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8996-gemini: correct UFS pad supply

The Qualcomm UFS phy switched from dedicated driver to QMP phy driver.
Eventually the old driver was removed in commit 02dca8c981b5 ("phy:
qcom: remove ufs qmp phy driver").  The original driver and its binding
used vddp-ref-clk regulator supply, but the new one did not and left the
supply unused.

The Qualcomm UFS phy bindings were also migrated to newer ones and
dropped support for vddp-ref-clk regulator in commit dc5cb63592bd
("dt-bindings: phy: migrate QMP UFS PHY bindings to
qcom,sc8280xp-qmp-ufs-phy.yaml").

It turns out that this regulator, although with inaccurate name
vddp-ref-clk, is actually needed to provide supply for VDD_PX10 (or
similar, depending on the SoC) used by UFS controller.

Bring back handling of this supply by using more appropriate regulator -
UFS controller host supply.  This also fixes dtbs_check warning:

  msm8996-xiaomi-gemini.dtb: phy@627000: 'vddp-ref-clk-supply' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230905161920.252013-8-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8996-oneplus: correct UFS pad supply

The Qualcomm UFS phy switched from dedicated driver to QMP phy driver.
Eventually the old driver was removed in commit 02dca8c981b5 ("phy:
qcom: remove ufs qmp phy driver").  The original driver and its binding
used vddp-ref-clk regulator supply, but the new one did not and left the
supply unused.

The Qualcomm UFS phy bindings were also migrated to newer ones and
dropped support for vddp-ref-clk regulator in commit dc5cb63592bd
("dt-bindings: phy: migrate QMP UFS PHY bindings to
qcom,sc8280xp-qmp-ufs-phy.yaml").

It turns out that this regulator, although with inaccurate name
vddp-ref-clk, is actually needed to provide supply for VDD_PX10 (or
similar, depending on the SoC) used by UFS controller.

Bring back handling of this supply by using more appropriate regulator -
UFS controller host supply.  This also fixes dtbs_check warning:

  msm8996-oneplus3t.dtb: phy@627000: 'vddp-ref-clk-supply' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230905161920.252013-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: apq8096-db820c: correct UFS pad supply

The Qualcomm UFS phy switched from dedicated driver to QMP phy driver.
Eventually the old driver was removed in commit 02dca8c981b5 ("phy:
qcom: remove ufs qmp phy driver").  The original driver and its binding
used vddp-ref-clk regulator supply, but the new one did not and left the
supply unused.

The Qualcomm UFS phy bindings were also migrated to newer ones and
dropped support for vddp-ref-clk regulator in commit dc5cb63592bd
("dt-bindings: phy: migrate QMP UFS PHY bindings to
qcom,sc8280xp-qmp-ufs-phy.yaml").

It turns out that this regulator, although with inaccurate name
vddp-ref-clk, is actually needed to provide supply for VDD_PX10 (or
similar, depending on the SoC) used by UFS controller.

Bring back handling of this supply by using more appropriate regulator -
UFS controller host supply.  This also fixes dtbs_check warning:

  apq8096-db820c.dtb: phy@627000: 'vddp-ref-clk-supply' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230905161920.252013-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm6115p-j606f: correct UFS pad supply

The Qualcomm UFS phy switched from dedicated driver to QMP phy driver.
Eventually the old driver was removed in commit 02dca8c981b5 ("phy:
qcom: remove ufs qmp phy driver").  The original driver and its binding
used vddp-ref-clk regulator supply, but the new one did not and left the
supply unused.

The Qualcomm UFS phy bindings were also migrated to newer ones and
dropped support for vddp-ref-clk regulator in commit dc5cb63592bd
("dt-bindings: phy: migrate QMP UFS PHY bindings to
qcom,sc8280xp-qmp-ufs-phy.yaml").

It turns out that this regulator, although with inaccurate name
vddp-ref-clk, is actually needed to provide supply for VDD_PX10 (or
similar, depending on the SoC) used by UFS controller.

Bring back handling of this supply by using more appropriate regulator -
UFS controller host supply.  This also fixes dtbs_check warning:

  sm6115p-lenovo-j606f.dtb: phy@4807000: 'vddp-ref-clk-supply' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230905161920.252013-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm6115-pro1x: correct UFS pad supply

The Qualcomm UFS phy switched from dedicated driver to QMP phy driver.
Eventually the old driver was removed in commit 02dca8c981b5 ("phy:
qcom: remove ufs qmp phy driver").  The original driver and its binding
used vddp-ref-clk regulator supply, but the new one did not and left the
supply unused.

The Qualcomm UFS phy bindings were also migrated to newer ones and
dropped support for vddp-ref-clk regulator in commit dc5cb63592bd
("dt-bindings: phy: migrate QMP UFS PHY bindings to
qcom,sc8280xp-qmp-ufs-phy.yaml").

It turns out that this regulator, although with inaccurate name
vddp-ref-clk, is actually needed to provide supply for VDD_PX10 (or
similar, depending on the SoC) used by UFS controller.

Bring back handling of this supply by using more appropriate regulator -
UFS controller host supply.  This also fixes dtbs_check warning:

  sm6115-fxtec-pro1x.dtb: phy@4807000: 'vddp-ref-clk-supply' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230905161920.252013-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm6125-sprout: correct UFS pad supply

The Qualcomm UFS phy switched from dedicated driver to QMP phy driver.
Eventually the old driver was removed in commit 02dca8c981b5 ("phy:
qcom: remove ufs qmp phy driver").  The original driver and its binding
used vddp-ref-clk regulator supply, but the new one did not and left the
supply unused.

The Qualcomm UFS phy bindings were also migrated to newer ones and
dropped support for vddp-ref-clk regulator in commit dc5cb63592bd
("dt-bindings: phy: migrate QMP UFS PHY bindings to
qcom,sc8280xp-qmp-ufs-phy.yaml").

It turns out that this regulator, although with inaccurate name
vddp-ref-clk, is actually needed to provide supply for VDD_PX10 (or
similar, depending on the SoC) used by UFS controller.

Bring back handling of this supply by using more appropriate regulator -
UFS controller host supply.  This also fixes dtbs_check warning:

  sm6125-xiaomi-laurel-sprout.dtb: phy@4807000: 'vddp-ref-clk-supply' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230905161920.252013-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm6125-sprout: drop incorrect UFS phy max current

Neither bindings nor UFS phy driver use properties like
'vdda-phy-max-microamp' and 'vdda-pll-max-microamp':

  sm6125-xiaomi-laurel-sprout.dtb: phy@4807000: 'vdda-phy-max-microamp', 'vdda-pll-max-microamp' do not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230905161920.252013-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: ipq6018: Fix tcsr_mutex register size

IPQ6018's TCSR Mutex HW lock register has 32 locks of size 4KB each.
Total size of the TCSR Mutex registers is 128KB.

Fix size of the tcsr_mutex hwlock register to 0x20000.

Changes in v2:
 - Drop change to remove qcom,ipq6018-tcsr-mutex compatible string
 - Added Fixes and stable tags

Cc: stable@vger.kernel.org
Fixes: 5bf635621245 ("arm64: dts: ipq6018: Add a few device nodes")
Signed-off-by: Vignesh Viswanathan <quic_viswanat@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230905095535.1263113-2-quic_viswanat@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: ipq9574: Fix hwlock index for SMEM

SMEM uses lock index 3 of the TCSR Mutex hwlock for allocations
in SMEM region shared by the Host and FW.

Fix the SMEM hwlock index to 3 for IPQ9574.

Cc: stable@vger.kernel.org
Fixes: 46384ac7a618 ("arm64: dts: qcom: ipq9574: Add SMEM support")
Signed-off-by: Vignesh Viswanathan <quic_viswanat@quicinc.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230904172516.479866-5-quic_viswanat@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: ipq6018: Fix hwlock index for SMEM

SMEM uses lock index 3 of the TCSR Mutex hwlock for allocations
in SMEM region shared by the Host and FW.

Fix the SMEM hwlock index to 3 for IPQ6018.

Cc: stable@vger.kernel.org
Fixes: 5bf635621245 ("arm64: dts: ipq6018: Add a few device nodes")
Signed-off-by: Vignesh Viswanathan <quic_viswanat@quicinc.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230904172516.479866-3-quic_viswanat@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: ipq5332: Fix hwlock index for SMEM

SMEM uses lock index 3 of the TCSR Mutex hwlock for allocations
in SMEM region shared by the Host and FW.

Fix the SMEM hwlock index to 3 for IPQ5332.

Cc: stable@vger.kernel.org
Fixes: d56dd7f935e1 ("arm64: dts: qcom: ipq5332: add SMEM support")
Signed-off-by: Vignesh Viswanathan <quic_viswanat@quicinc.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230904172516.479866-2-quic_viswanat@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: ipq8074: Fix hwlock index for SMEM

SMEM uses lock index 3 of the TCSR Mutex hwlock for allocations
in SMEM region shared by the Host and FW.

Fix the SMEM hwlock index to 3 for IPQ8074.

Cc: stable@vger.kernel.org
Fixes: 42124b947e8e ("arm64: dts: qcom: ipq8074: add SMEM support")
Signed-off-by: Vignesh Viswanathan <quic_viswanat@quicinc.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230904172516.479866-4-quic_viswanat@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8916-samsung-j5-common: Add accelerometer

J5 and J5X have ST LIS2HH12 accelerometer.
Add support for it.

Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
Co-developed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Co-developed-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230904123123.2593-1-linmengbo0689@protonmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: split pmr735d into 2

The second PMR735D PMIC is not always presend on SM8550 based devices,
split the pmr735d.dtsi file in two so boards files can only include the
ones present on the platform.

Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230831-topic-sm8550-upstream-pmr735d-split-v1-1-98e632636415@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: ipq5332: Enable USB

Enable USB2 in host mode.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://lore.kernel.org/r/d4c20505dd2103b5421eab7602aec4f83bd62dbe.1693468292.git.quic_varada@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: ipq5332: Add USB related nodes

Add USB phy and controller nodes.

Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://lore.kernel.org/r/f25777bfe2c84e203b7615527607900b756c51bd.1693468292.git.quic_varada@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm7225-fp4: Revert "arm64: dts: qcom: sm7225-fairphone-fp4: Add AW8695 haptics"

This reverts commit 413821b7777d062b57f8dc66ab088ed390cbc3ec because it
was never reviewed, was buggy (report from kernel test robot:
https://lore.kernel.org/all/202204090333.QZXMI2tu-lkp@intel.com/) and
used undocumented, broken bindings.  Half of the properties in this
device are questioned, thus adding DTS node causes only errors and does
not make the device usable without the bindings and driver part:

  sm7225-fairphone-fp4.dtb: haptics@5a: failed to match any schema with compatible: ['awinic,aw8695']
  sm7225-fairphone-fp4.dtb: haptics@5a: awinic,tset: b'\x12' is not of type 'object', 'array', 'boolean', 'null'
  sm7225-fairphone-fp4.dtb: haptics@5a: awinic,r-spare: b'h' is not of type 'object', 'array', 'boolean', 'null'

Since bindings were abandoned (4 months since review), revert the commit
to avoid false sense of supporting something which is not supported.

Cc: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20230827122842.63741-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc8180x: drop incorrect cell-index from SPMI

The SPMI controller (PMIC Arbiter) does not use nor allow 'cell-index'
property:

  sc8180x-primus.dtb: spmi@c440000: Unevaluated properties are not allowed ('cell-index' was unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230827122842.63741-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8939-longcheer-l9100: Add initial device tree

This dts adds support for BQ Aquaris M5 (Longcheer L9100) released in
2015.

Add a device tree with initial support for:

- GPIO keys
- Hall sensor
- SDHCI
- WCNSS (BT/WIFI)
- Accelerometer/Magnetometer
- Vibrator
- Touchscreen
- Front flash

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: André Apitzsch <git@apitzsch.eu>
Link: https://lore.kernel.org/r/20230827-bq_m5-v4-2-f8435fb8f955@apitzsch.eu
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: arm: qcom: Add BQ Aquaris M5

Add a compatible for BQ Aquaris M5 (Longcheer L9100).

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Apitzsch <git@apitzsch.eu>
Link: https://lore.kernel.org/r/20230827-bq_m5-v4-1-f8435fb8f955@apitzsch.eu
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sdm845-mtp: enable PCIe support

Enable two PCIe hosts support on Qualcomm SDM845 MTP board.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230826221915.846937-6-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sdm845-mtp: enable Vol-/reset button

Wire up the Vol- / reset button on Qualcomm SDM845 MTP board.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230826221915.846937-5-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sdm845-mtp: switch to mbn firmware

We have switched most of devices to use mbn (squashed) firmware files
instead of spit mdt+bNN. Even this DT uses modem.mbn and a630_zap.mbn.
Let's switch adsp and cdsp firmware files to use .mbn format too.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230826221915.846937-4-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sdm845-mtp: specify wifi variant

Specify the variant for the WiFi BDF file, "Qualcomm_sdm845mtp" to ease
distinguishing from other (possible) devices using the same board id.

For the reference:

ath10k_snoc 18800000.wifi: qmi chip_id 0x30214 chip_family 0x4001 board_id 0x3f soc_id 0x40030001
ath10k_snoc 18800000.wifi: qmi fw_version 0x2009856b fw_build_timestamp 2018-07-19 12:28 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HL.2.0-01387-QCAHLSWMTPLZ-1
ath10k_snoc 18800000.wifi: failed to fetch board data for bus=snoc,qmi-board-id=3f,qmi-chip-id=30214,variant=Qualcomm_sdm845mtp from ath10k/WCN3990/hw1.0/board-2.bin
ath10k_snoc 18800000.wifi: wcn3990 hw1.0 target 0x00000008 chip_id 0x00000000 sub 0000:0000
ath10k_snoc 18800000.wifi: kconfig debug 1 debugfs 0 tracing 0 dfs 0 testmode 0
ath10k_snoc 18800000.wifi: firmware ver  api 5 features wowlan,mgmt-tx-by-reference,non-bmi crc32 b3d4b790
ath10k_snoc 18800000.wifi: htt-ver 3.53 wmi-op 4 htt-op 3 cal file max-sta 32 raw 0 hwcrypto 1
ath10k_snoc 18800000.wifi: invalid MAC address; choosing random

Cc: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230826221915.846937-3-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sdm845-mtp: fix WiFi configuration

Enable the host-cap-8bit quirk on this device. It is required for the
WiFi to function properly.

Fixes: 022bccb840b7 ("arm64: dts: sdm845: Add WCN3990 WLAN module device node")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230826221915.846937-2-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8350-hdk: add pmr735a regulators

The SM8350 HDK uses pmr735a to supply some of the voltages (e.g. to
WiFi/BT chip). Declare corresponding regulators together with voltage
boundaries.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230825214550.1650938-3-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8350-hdk: add missing PMICs

Include configuration for several PMICs presend on the board.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230825214550.1650938-2-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8350: fix pinctrl for UART18

On sm8350 QUP18 uses GPIO 68/69, not 58/59. Fix correponding UART18
pinconf configuraion.

Fixes: 98374e6925b8 ("arm64: dts: qcom: sm8350: Set up WRAP2 QUPs")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230825214550.1650938-1-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sdm845-tama: Add camera GPIO regulators

Like on many other platforms, Tama devices utilize lots of GPIO-
enabled regulators for the camera sensors. Define them in the DT.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230824-topic-tama_gpio-v1-3-014e9d198dce@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sdm845-tama: Add GPIO line names for PMIC GPIOs

Sony ever so graciously provides GPIO line names in their downstream
kernel (though sometimes they are not 100% accurate and you can judge
that by simply looking at them and with what drivers they are used).

Add these to the Akari, Apollo & Akatsuki DTS-es to better document
the hardware.

pm8005 and pm8998 config is common for all three boards.
Apollo has VIB_LDO_EN (replacing NC) on PMI8998_GPIO_5

Akari and Akatsuki have WLC_EN_N (replacing NC) on PMI8998_GPIO_8

Akari additionally has RSVD(WLC_EN_N) (replacing) on PMI8998_GPIO_11
which sounds a bit like a forgot-to-update-documentation, but maybe
it differs between SKUs.. Time will tell, when we get to enabling the
wireless charger.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230824-topic-tama_gpio-v1-2-014e9d198dce@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sdm845-tama: Add GPIO line names for TLMM

Sony ever so graciously provides GPIO line names in their downstream
kernel (though sometimes they are not 100% accurate and you can judge
that by simply looking at them and with what drivers they are used).

Add these to the Akari, Apollo & Akatsuki DTS-es to better document
the hardware.

Apollo can be considered the 'base configuration'. Akari brings
WLC_INT_N on GPIO_31 over that.

Akatsuki & Akari diff:

<                         "NC",
>                         "SAMD_RSTEN_N",
<                         "NC",
>                         "MASTER_RST_N",
<                         "NC",
>                         "DISP_ERR_FG",
<                         "NC",
>                         "SAMD_BOOTL_PIN",
<                         "NC",
<                         "NC",
<                         "NC", /* GPIO_60 */
>                         "SDM_SWD_CLK",
>                         "SDM_SWD_DAT",
>                         "SAMD_RST", /* GPIO_60 */
<                         "NC",
>                         "MODE_SEL2",
<                         "NC",
>                         "NFC_ESE_PWR_REQ",
<                         "NC",
>                         "TS_VDDIO_EN",

Which makes sense, as Akari and Akatsuki have a wireless charger and
Akatsuki also additionally has a super-high-end-complex-for-the-time
Samsung OLED display, as opposed to LCDs on the other Tama devices.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230824-topic-tama_gpio-v1-1-014e9d198dce@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: Add support for the Xiaomi SM7125 platform

There are 6 Xiaomi smartphones with the SM7125 SoC:

- POCO M2 Pro (gram)
- Redmi Note 9S (curtana)
- Redmi Note 9 Pro (Global, joyeuse)
- Redmi Note 9 Pro (India, curtana)
- Redmi Note 9 Pro Max (excalibur)
- Redmi Note 10 Lite (curtana)

These devices share a common board design (a.k.a miatoll) with only a
few differences. Add support for the common board, as well as support
for the global Redmi Note 9 Pro.

Signed-off-by: David Wronek <davidwronek@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230824091737.75813-5-davidwronek@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: Add SM7125 device tree

The Snapdragon 720G (sm7125) is software-wise very similar to the
Snapdragon 7c with minor differences in clock speeds and as added here,
it uses the Kryo 465 instead of Kryo 468.

Signed-off-by: David Wronek <davidwronek@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230824091737.75813-4-davidwronek@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: pm6150: Add resin and rtc nodes

Add support for the RTC which is the same as on other PMICs and add the
resin child node to the PM6150 PON device, both disabled by default.

Signed-off-by: David Wronek <davidwronek@gmail.com>
Tested-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230824091737.75813-3-davidwronek@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: arm: qcom: Document SM7125 and xiaomi,joyeuse board

Document the xiaomi,joyeuse board based on the Qualcomm SM7125 SoC.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David Wronek <davidwronek@gmail.com>
Link: https://lore.kernel.org/r/20230824091737.75813-2-davidwronek@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc7180: Add sku_id and board id for lazor/limozeen

SKU ID 10: Lazor LTE+Wifi, no-esim (Strapped 0 X 0)
SKU ID 15: Limozeen LTE+Wifi, TS, no esim (Strapped 1 X 0)
SKU ID 18: Limozeen LTE+Wifi, no TS, no esim (Strapped X 0 0)

Even though the "no esim" boards are strapped differently than
ones that have an esim, the esim isn't represented in the
device tree so the same device tree can be used for LTE w/ esim
and LTE w/out esim.

add BRD_ID(0, Z, 0) = 10 for new board with ALC5682i-VS

Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20230823151005.v6.2.I8f20fdfe34a2e8a38373bbd65587754b324f3dcb@changeid
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: arm: qcom: add sc7180-lazor board bindings

Introduce more sc7180-lazor sku and board version configuration,
add no-eSIM SKU 10 for Lazor, no-eSIM SKU 15 and 18 for Limozeen,
add new board version 10 for audio codec ALC5682i-VS.

Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230823151005.v6.1.I26e017b00a341e7a5a2e94a83596923713408817@changeid
Signed-off-by: Bjorn Andersson <andersson@kernel.org>