Arnd Bergmann [Mon, 13 Feb 2023 14:47:21 +0000 (15:47 +0100)]
Merge tag 'qcom-arm64-for-6.3-2' of https://git./linux/kernel/git/qcom/linux into arm/dt
More Qualcomm ARM64 DT updates for 6.3
The new Qualcomm QDU1000 and QRU1000 platforms, and the IDP device on
these are introduced. New support for a couple of USB modem sticks from
THWC are introduced, so is support for Xiaomi Mi Pad 5 Pro and the Pro
SKU of the Herobrine device.
The Core Bus Fabric (CBF) is introduced on MSM8996. Interconnect paths
for UFS are also described.
A few fixes related to the power-grid of herobrine, on SC7280, are
introduced.
QFPROM is introduced on IPQ8074 and Interconnect providers are added for
SDM670.
On SDM845 the duplicated wcd9340 audio coded description is moved from
devices to a common file, audio devices are added to the OnePlus 6 and
6T.
On SM6115 debug UART, SMP2P, watchdog nodes are introduced, and the
platform is switched to use #address/size-cells of 2, in line with most
other platforms.
Camera control interface and clock controllers are added for SM6350, and
the CCI interface is enabled on the Fairphone FP4.
On SM8350 the interconnect reference of SDHCI controller is corrected,
DSI1 PHY clocks are properly described as sources for the Display clock
controller and DSI1 is wired up to the display controller.
The firmware paths are corrected for the Sony Xperia Nagara platform.
The GPR bus, audio servic3es and LPASS pinctrl nodes are added for the
SM8550 platform. Additionally a few small typos/errors are corrected.
gpio-ranges are corrected across MSM8953, SM6115 and SC8280XP and a
range of DT validation issues are corrected.
* tag 'qcom-arm64-for-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (81 commits)
arm64: dts: qcom: sc7280: Power herobrine's 3.3 eDP/TS rail more properly
arm64: dts: qcom: pmk8550: fix PON compatible
arm64: dts: qcom: sm8550: fix DSI controller compatible
arm64: dts: qcom: sc7280: Hook up the touchscreen IO rail on evoker
arm64: dts: qcom: sc7280: Hook up the touchscreen IO rail on villager
arm64: dts: qcom: sc7280: Add 3ms ramp to herobrine's pp3300_left_in_mlb
arm64: dts: qcom: sc7280: On QCard, regulator L3C should be 1.8V
arm64: dts: qcom: sc8280xp: correct LPASS GPIO gpio-ranges
arm64: dts: qcom: msm8992-lg-bullhead: Enable regulators
arm64: dts: qcom: sm6115: correct TLMM gpio-ranges
arm64: dts: qcom: msm8953: correct TLMM gpio-ranges
arm64: dts: qcom: msm8992-lg-bullhead: Correct memory overlaps with the SMEM and MPSS memory regions
arm64: dts: qcom: sm8350-hdk: correct LT9611 pin function
arm64: dts: qcom: sm8350-hdk: align pin config node names with bindings
arm64: dts: qcom: sm6350: Use specific qmpphy compatible
arm64: dts: qcom: sm6115: Add smp2p nodes
arm64: dts: qcom: sm7225-fairphone-fp4: Enable CCI busses
arm64: dts: qcom: sm6350: Add CCI nodes
arm64: dts: qcom: sm6350: Add camera clock controller
dt-bindings: clock: add QCOM SM6350 camera clock bindings
...
Link: https://lore.kernel.org/r/20230210192908.2039976-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Mon, 13 Feb 2023 14:44:37 +0000 (15:44 +0100)]
Merge tag 'qcom-dts-for-6.3-2' of https://git./linux/kernel/git/qcom/linux into arm/dt
More Qualcomm ARM32 DTS updates for 6.3
This adds backlight, notification LED, vibrator, volume keys and hall
sensor to the OnePlus One, and provides a range of Devicetree validation
fixes across various platforms.
* tag 'qcom-dts-for-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (22 commits)
ARM: dts: qcom: align OPP table names with DT schema
ARM: dts: qcom: msm8974-oneplus-bacon: Add notification LED
ARM: dts: qcom: msm8974-oneplus-bacon: Add backlight
ARM: dts: qcom: msm8974-oneplus-bacon: Add volume keys and hall sensor
ARM: dts: qcom: msm8974-oneplus-bacon: Add vibrator
ARM: dts: qcom: pm8941: Add vibrator node
ARM: dts: qcom: sdx55: correct TLMM gpio-ranges
dt-bindings: arm: qcom: add the sa8775p-ride board
ARM: dts: qcom: apq8064: add second DSI host and PHY
ARM: dts: qcom: apq8060-dragonboard: align MPP pin node names with DT schema
dt-bindings: arm: qcom: Add Xiaomi Mi Pad 5 Pro (xiaomi-elish)
ARM: dts: qcom-sdx65: align RPMh regulator nodes with bindings
ARM: dts: qcom-sdx55: align RPMh regulator nodes with bindings
ARM: dts: qcom: use "okay" for status
ARM: dts: qcom: sdx65: Add Qcom SMMU-500 as the fallback for IOMMU node
ARM: dts: qcom: sdx55: Add Qcom SMMU-500 as the fallback for IOMMU node
ARM: dts: qcom: apq8064: use hdmi_phy for the MMCC's hdmipll clock
ARM: dts: qcom: apq8064: add #clock-cells to the HDMI PHY node
ARM: dts: qcom: ipq8064: move reg-less nodes outside soc node
dt-bindings: qcom: Document msm8916-thwc-uf896 and ufi001c
...
Link: https://lore.kernel.org/r/20230210185846.2032601-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Mon, 13 Feb 2023 14:38:57 +0000 (15:38 +0100)]
Merge tag 'samsung-dt-6.3-2' of https://git./linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM changes for v6.3, part two
Several cleanups pointed out by `make dtbs_check`:
1. Align LED status node name with bindings.
2. Drop redundant properties.
3. Move i2c-gpio node out of soc to top-level, as soc node is expected
to have only MMIO nodes.
4. Correct SPI NOR flash compatible in SMDK5250 and SMDKv310.
5. Align GPIO property names in WM1811-family codec nodes with bindings.
6. Correct MAX98090 codec DAI cells in Snow.
* tag 'samsung-dt-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: correct max98090 DAI argument in Snow
ARM: dts: s5pv210: add "gpios" suffix to wlf,ldo1ena on Aries
ARM: dts: exynos: add "gpios" suffix to wlf,ldo1ena on Arndale
ARM: dts: exynos: add "gpios" suffix to wlf,ldo1ena on Midas
ARM: dts: exynos: correct SPI nor compatible in SMDK5250
ARM: dts: exynos: correct SPI nor compatible in SMDKv310
ARM: dts: exynos: move I2C10 out of soc node on Arndale
ARM: dts: exynos: drop redundant address/size cells from I2C10 on Arndale
ARM: dts: exynos: drop default status from I2C10 on Arndale
ARM: dts: exynos: align status led name with bindings on Origen4210
Link: https://lore.kernel.org/r/20230211113103.58894-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Thu, 9 Feb 2023 13:04:19 +0000 (14:04 +0100)]
Merge tag 'at91-dt-6.3-2' of https://git./linux/kernel/git/at91/linux into arm/dt
AT91 device tree updates for 6.3 #2
It contains:
- cleanups arround flexcom nodes on SAM9X60 SoC as follows:
- preserve same ID for flexcoms and the embedded nodes (e.g. flx4
will embed uart4, spi4, i2c4 but not e.g. uart1, spi2, i2c3);
- SoC specific bindings were moved from board specific file to SoC
specific file
- DMA bindings for all flexcom nodes were added
- SoC file was filled with missing flexcom nodes
- new SAM9X60 Curiosity board that contains 1 uSDcard interface, 1 SDcard
interface, 1 USB device interface, 2 USB Type-A interfaces, 2 CAN
interfaces, 1 10/100 Ethernet interface, 1 LCD RGB666 interface,
1 Gb DDR2, 4 Gb NAND Flash, 2Kb EEPROM, leds, button, power
regulators, UART and JTAG connectors
* tag 'at91-dt-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: at91: sam9x60_curiosity: Add device tree for sam9x60 curiosity board
dt-bindings: arm: at91: Add info on sam9x60 curiosity
ARM: dts: at91: sam9x60: Add missing flexcom definitions
ARM: dts: at91: sam9x60: Add DMA bindings for the flexcom nodes
ARM: dts: at91: sam9x60: Specify the FIFO size for the Flexcom UART
ARM: dts: at91: sam9x60: fix spi4 node
ARM: dts: at91: sam9x60: move flexcom definitions
ARM: dts: at91: sam9x60: Fix the label numbering for the flexcom functions
Link: https://lore.kernel.org/r/20230209084930.289721-1-claudiu.beznea@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Kunihiko Hayashi [Tue, 7 Feb 2023 02:14:29 +0000 (11:14 +0900)]
arm64: dts: uniphier: Fix property name in PXs3 USB node
The property "snps,usb2_gadget_lpm_disable" is wrong.
It should be fixed to "snps,usb2-gadget-lpm-disable".
Cc: stable@vger.kernel.org
Fixes:
19fee1a1096d ("arm64: dts: uniphier: Add USB-device support for PXs3 reference board")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20230207021429.28925-1-hayashi.kunihiko@socionext.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Kunihiko Hayashi [Tue, 7 Feb 2023 02:35:14 +0000 (11:35 +0900)]
arm64: dts: uniphier: Add syscon-uhs-mode to SD node
Add sociopnext,syscon-uhs-mode prpperty to the SD node to refer the handle
of the control logic node.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20230207023514.29783-9-hayashi.kunihiko@socionext.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Kunihiko Hayashi [Tue, 7 Feb 2023 02:35:13 +0000 (11:35 +0900)]
arm64: dts: uniphier: Add syscon compatible string to soc-glue-debug
Add "syscon" compatible string to the nodes for soc-glue-debug
according to the DT schema.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20230207023514.29783-8-hayashi.kunihiko@socionext.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Kunihiko Hayashi [Tue, 7 Feb 2023 02:35:12 +0000 (11:35 +0900)]
arm64: dts: uniphier: Add missing reg properties for glue layer nodes
The nodes for some glue layers don't include necessary reg properties.
Add the properties according to the DT schema.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20230207023514.29783-7-hayashi.kunihiko@socionext.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Kunihiko Hayashi [Tue, 7 Feb 2023 02:35:11 +0000 (11:35 +0900)]
arm64: dts: uniphier: Align node names for SoC-dependent controller and PHYs with bindings
The node names for SoC-dependent controllers and PHYs should be
generic ones according to the DT schemas.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20230207023514.29783-6-hayashi.kunihiko@socionext.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Kunihiko Hayashi [Tue, 7 Feb 2023 02:35:10 +0000 (11:35 +0900)]
ARM: dts: uniphier: Add syscon-uhs-mode to SD node
Add sociopnext,syscon-uhs-mode prpperty to the SD node to refer the handle
of the control logic node.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20230207023514.29783-5-hayashi.kunihiko@socionext.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Kunihiko Hayashi [Tue, 7 Feb 2023 02:35:09 +0000 (11:35 +0900)]
ARM: dts: uniphier: Add syscon compatible string to soc-glue-debug
Add "syscon" compatible string to the nodes for soc-glue-debug
according to the DT schema.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20230207023514.29783-4-hayashi.kunihiko@socionext.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Kunihiko Hayashi [Tue, 7 Feb 2023 02:35:08 +0000 (11:35 +0900)]
ARM: dts: uniphier: Add missing reg properties for glue layer
The nodes for glue layers should include "reg" property.
Add the property according to the DT schema.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20230207023514.29783-3-hayashi.kunihiko@socionext.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Kunihiko Hayashi [Tue, 7 Feb 2023 02:35:07 +0000 (11:35 +0900)]
ARM: dts: uniphier: Align node names for SoC-dependent controller and PHYs with bindings
The node names for SoC-dependent controllers and PHYs should be
generic ones according to the DT schemas.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20230207023514.29783-2-hayashi.kunihiko@socionext.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Thu, 9 Feb 2023 12:57:06 +0000 (13:57 +0100)]
Merge tag 'aspeed-6.3-devicetree' of git://git./linux/kernel/git/joel/bmc into arm/dt
ASPEED device tree updates for 6.3
- New machines
* Ufispace NCPLite AST2600 BMC
* Facebook Greatlakes AST2600 BMC
- Updates for ethanolx, bletchley and tyan s8036
* tag 'aspeed-6.3-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
ARM: dts: aspeed: p10bmc: Enable UART2
ARM: dts: aspeed: Add device tree for Ufispace NCPLite BMC
dt-bindings: arm: aspeed: document Ufispace NCPLite BMC
dt-bindings: vendor-prefixes: Add prefix for Ufi Space
arm: dts: aspeed: tyan s8036: Enable kcs interrupts
ARM: dts: aspeed: bletchley: Enable wdtrst1
ARM: dts: aspeed: bletchley: Rename flash1 label
ARM: dts: aspeed: ethanolx: Add BIOS flash chip
ARM: dts: aspeed: ethanolx: Enable CTS/RTS pins on UART1
ARM: dts: aspeed: ethanolx: Add label for the master partition
ARM: dts: aspeed: ethanolx: Correct EEPROM device name
ARM: dts: aspeed: ethanolx: Enable VUART
ARM: dts: aspeed: greatlakes: Add Facebook greatlakes (AST2600) BMC
dt-bindings: arm: aspeed: add Facebook Greatlakes board
Link: https://lore.kernel.org/r/CACPK8XdbffU5yRSZF-zR2xv-+6aJK+hEXP8TOkW=SvS+nNTGxg@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Krzysztof Kozlowski [Wed, 8 Feb 2023 16:04:24 +0000 (17:04 +0100)]
ARM: dts: exynos: correct max98090 DAI argument in Snow
The max98090 has only one DAI and does not take argument to DAI
phandles:
exynos5250-snow-rev5.dtb: audio-codec@10: #sound-dai-cells:0:0: 0 was expected
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20230208160424.371678-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Krzysztof Kozlowski [Wed, 8 Feb 2023 17:26:34 +0000 (18:26 +0100)]
ARM: dts: s5pv210: add "gpios" suffix to wlf,ldo1ena on Aries
The GPIOs properties should end with "gpios" suffix and Linux gpiolib
already handles both names, so switch to preferred one.
Link: https://lore.kernel.org/r/20230208172634.404452-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Krzysztof Kozlowski [Wed, 8 Feb 2023 17:26:33 +0000 (18:26 +0100)]
ARM: dts: exynos: add "gpios" suffix to wlf,ldo1ena on Arndale
The GPIOs properties should end with "gpios" suffix and Linux gpiolib
already handles both names, so switch to preferred one.
Link: https://lore.kernel.org/r/20230208172634.404452-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Krzysztof Kozlowski [Wed, 8 Feb 2023 17:26:32 +0000 (18:26 +0100)]
ARM: dts: exynos: add "gpios" suffix to wlf,ldo1ena on Midas
The GPIOs properties should end with "gpios" suffix and Linux gpiolib
already handles both names, so switch to preferred one.
While touching the lines, replace open-coded GPIO_ACTIVE_HIGH flag.
Tested-by: Henrik Grimler <henrik@grimler.se>
Link: https://lore.kernel.org/r/20230208172634.404452-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Krzysztof Kozlowski [Wed, 8 Feb 2023 16:49:42 +0000 (17:49 +0100)]
ARM: dts: exynos: correct SPI nor compatible in SMDK5250
SPI NOR flash compatible should come with generic jedec,spi-nor fallback
and proper vendor prefix:
exynos5250-smdk5250.dtb: /soc/spi@
12d30000/flash@0: failed to match any schema with compatible: ['w25x80']
Link: https://lore.kernel.org/r/20230208164942.387390-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Krzysztof Kozlowski [Wed, 8 Feb 2023 16:49:41 +0000 (17:49 +0100)]
ARM: dts: exynos: correct SPI nor compatible in SMDKv310
SPI NOR flash compatible should come with generic jedec,spi-nor fallback
and proper vendor prefix:
exynos4210-smdkv310.dtb: /soc/spi@
13940000/flash@0: failed to match any schema with compatible: ['w25x80']
Link: https://lore.kernel.org/r/20230208164942.387390-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Krzysztof Kozlowski [Tue, 7 Feb 2023 21:00:20 +0000 (22:00 +0100)]
ARM: dts: exynos: move I2C10 out of soc node on Arndale
I2C10 is represented as i2c-gpio device, thus it is not really a part of
soc MMIO bus:
exynos5250-arndale.dtb: soc: i2c-10: {'pinctrl-names': ['default'], ... } should not be valid under {'type': 'object'}
Link: https://lore.kernel.org/r/20230207210020.677007-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Krzysztof Kozlowski [Tue, 7 Feb 2023 21:00:19 +0000 (22:00 +0100)]
ARM: dts: exynos: drop redundant address/size cells from I2C10 on Arndale
I2C10 does not have any children because it is used in HDMI DDC, so drop
redundant address/size-cells.
Link: https://lore.kernel.org/r/20230207210020.677007-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Krzysztof Kozlowski [Tue, 7 Feb 2023 21:00:18 +0000 (22:00 +0100)]
ARM: dts: exynos: drop default status from I2C10 on Arndale
status=okay is by default for new nodes.
Link: https://lore.kernel.org/r/20230207210020.677007-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Krzysztof Kozlowski [Tue, 7 Feb 2023 21:00:17 +0000 (22:00 +0100)]
ARM: dts: exynos: align status led name with bindings on Origen4210
The "status" is a reserved keyword and LED nodes should have generic
prefix:
exynos4210-origen.dtb: leds: status: {'gpios': [[76, 3, 1]],
'function': ['heartbeat'], 'linux,default-trigger': ['heartbeat']} is not of type 'array'
Link: https://lore.kernel.org/r/20230207210020.677007-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Douglas Anderson [Wed, 8 Feb 2023 00:36:10 +0000 (16:36 -0800)]
arm64: dts: qcom: sc7280: Power herobrine's 3.3 eDP/TS rail more properly
This is the equivalent of commit
f5b4811e8758 ("arm64: dts: qcom:
sc7180: Add trogdor eDP/touchscreen regulator off-on-time") and commit
23ff866987de ("arm64: dts: qcom: sc7180: Start the trogdor
eDP/touchscreen regulator on"), but for herobrine instead of trogdor.
The motivations for herobrine are the same as for trogdor.
NOTES:
* Currently for herobrine all boards are eDP, not MIPI. If/when we
have herobrine derivatives that are MIPI they we can evaluate
whether the same off-on-delay makes sense for them. For trogdor we
didn't add the delay to MIPI panels because the problem was found
late and nobody had complained about it. For herobrine defaulting to
assuming the same 500ms makes sense and if we find we need to
optimize later we can.
* Currently there are no oddball herobrine boards like homestar where
the panel really likes to be power cycled. If we have an oddball
board it will need to split the eDP and touchscreen rail anyway
(like homestar did) and we'll have to delete the "regulator-boot-on"
from that board.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230207163550.1.I5ff72b7746d5fca8f10ea61351bde4150ed1a7f8@changeid
Neil Armstrong [Tue, 7 Feb 2023 10:06:58 +0000 (11:06 +0100)]
arm64: dts: qcom: pmk8550: fix PON compatible
The right compatible is qcom,pmk8350-pon, it matches the
reg resources associated to the node and the subnodes compatible
properties.
Fixes:
e9c0a4e48489 ("arm64: dts: qcom: Add PMK8550 pmic dtsi")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230207-topic-sm8550-upstream-sm8550-dt-fix-v1-2-698d132ab285@linaro.org
Neil Armstrong [Tue, 7 Feb 2023 10:06:57 +0000 (11:06 +0100)]
arm64: dts: qcom: sm8550: fix DSI controller compatible
Add missing sm8550 soc specific compatible before fallback to
match the updated bindings.
Fixes:
d7da51db5b81 ("arm64: dts: qcom: sm8550: add display hardware devices")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230207-topic-sm8550-upstream-sm8550-dt-fix-v1-1-698d132ab285@linaro.org
Douglas Anderson [Tue, 7 Feb 2023 02:48:16 +0000 (18:48 -0800)]
arm64: dts: qcom: sc7280: Hook up the touchscreen IO rail on evoker
On older revisions of evoker, the touchscreen was either
non-functional or needed special hardware magic to get it talking
properly. It's been decided that the proper way going forward is to
use L3C to power some buffers on the QCard and then configure the
touchscreens for 1.8V. Let's do that.
Note that this is safe to do even on older revs even if it might not
make the touchscreen work there (because they didn't have a properly
stuffed QCard). As talked about in the patch ("arm64: dts: qcom:
sc7280: On QCard, regulator L3C should be 1.8V") the L3C regulator
didn't go anywhere at all on older revs.
This patch relies on the patch ("HID: i2c-hid: goodix: Add
mainboard-vddio-supply") in order to function properly. Without that
patch this one won't do any harm but it won't actually accomplish its
goal.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230206184744.7.I2d960ed7f2445db0cf3d227fde985fbd740f3c4d@changeid
Douglas Anderson [Tue, 7 Feb 2023 02:48:12 +0000 (18:48 -0800)]
arm64: dts: qcom: sc7280: Hook up the touchscreen IO rail on villager
On never revs of sc7280-herobrine-villager (rev2+) the L3C rail is
provided to the touchscreen as the IO voltage rail. Let's add it in
the device tree.
NOTE: Even though this is only really needed on rev2+ villagers (-rev0
had non-functioning touchscreen and -rev1 had some hacky hardware
magic), it doesn't actually hurt to do this for old villager revs. As
talked about in the patch ("arm64: dts: qcom: sc7280: On QCard,
regulator L3C should be 1.8V") the L3C regulator didn't go anywhere at
all on older revs. That means that turning it on for older revs
doesn't hurt other than drawing a tiny bit of extra power. Since -rev0
and -rev1 villagers will never make it to real customers and it's nice
not to have too many old device trees, the better tradeoff seems to be
to enable it everywhere.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230206184744.3.I740d409bc5bb69bf4a7b3c4568ea6e7a92f16ccd@changeid
Douglas Anderson [Tue, 7 Feb 2023 02:48:11 +0000 (18:48 -0800)]
arm64: dts: qcom: sc7280: Add 3ms ramp to herobrine's pp3300_left_in_mlb
The "pp3300_left_in_mlb" rail on herobrine eventually connects up to
"vreg_edp_3p3" on the qcard. On several herobrine designs this rail
has been measured to need more than 1ms to turn on.
While technically a herobrine derivative (defined as anyone including
the "herobrine.dtsi") could change the board to make the rail rise
faster or slower, the fact that two boards (evoker and villager) both
measured it as taking more than 1ms implies that it's probably going
to be the norm. Thus, let's add a "regulator-enable-ramp-delay"
straight into the herobrine.dtsi to handle this. If a particular
derivative board needs a faster or slower one then they can override
it, though that feels unlikely.
While we measured something a bit over 1ms, we'll choose 3ms to give
us a tiny bit of margin. This isn't a rail that turns off and on all
the time anyway and 3ms is nothing compared to the total amount of
time to power on a panel.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230206184744.2.I13814cefc5ab3e0a39ebd09f052e3fd25d4e8f1d@changeid
Douglas Anderson [Tue, 7 Feb 2023 02:48:10 +0000 (18:48 -0800)]
arm64: dts: qcom: sc7280: On QCard, regulator L3C should be 1.8V
On the first sc7280 QCards the L3C rail was never really used for
anything. Stuffing options on the QCard meant that the QCard itself
didn't use this rail for anything. This rail did get sent to the
mainboard, but no existing mainboards ever did anything with it other
that route it to a testpoint.
On later sc7280 QCards, the L3C rail was repurposed. Instead of being
a (nominally) 3.3V rail, it was decided to make it a 1.8V rail. It is
now provided to the display connector (which might route it to the
touchscreen) and also used to power some buffers relating to
touchscreen IO. This rail is getting the additional tag "ts_avccio",
though some places still refer to it as "vreg_l3c_3p0" despite the
fact that the name now specifies the wrong voltage.
Since it never hurts for this rail to be 1.8V (even on old QCards /
old boards), let's just change it to 1.8V across the board and add the
extra "ts_avccio" moniker as a label in the device tree.
Future patches will start using this rail in their touchscreens.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230206184744.1.I784f4b3d7e4a06edafff4a3129f52e749889bc05@changeid
Krzysztof Kozlowski [Fri, 3 Feb 2023 16:48:54 +0000 (17:48 +0100)]
arm64: dts: qcom: sc8280xp: correct LPASS GPIO gpio-ranges
The SC8280XP LPASS pin controller has GPIOs 0-18, so correct the number
of GPIOs in gpio-ranges.
Fixes:
c18773d162a6 ("arm64: dts: qcom: sc8280xp: add SoundWire and LPASS")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230203164854.390080-5-krzysztof.kozlowski@linaro.org
Petr Vorel [Fri, 3 Feb 2023 10:09:52 +0000 (11:09 +0100)]
arm64: dts: qcom: msm8992-lg-bullhead: Enable regulators
Enable pm8994_s1, pm8994_l{26,29,30,32} regulators.
Use values from downstream kernel on bullhead rev 1.01.
NOTE: downstream kernel on angler rev 1.01 differences:
* pm8994_l29: regulator-min-microvolt = <
2700000>
* pm8994_l{20,28,31}: use regulator-boot-on
Verification:
[ 1.832460] s1: Bringing 0uV into
1025000-1025000uV
...
[ 2.057667] l26: Bringing 0uV into 987500-987500uV
...
[ 2.075722] l29: Bringing 0uV into
2800000-2800000uV
[ 2.076604] l30: Bringing 0uV into
1800000-1800000uV
[ 2.082431] l31: Bringing 0uV into
1262500-1262500uV
[ 2.095767] l32: Bringing 0uV into
1800000-1800000uV
Fixes:
f3b2c99e73be ("arm64: dts: Enable onboard SDHCI on msm8992")
Signed-off-by: Petr Vorel <pvorel@suse.cz>
Tested-by: Jamie Douglass <jamiemdouglass@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230203100952.13857-1-pvorel@suse.cz
Krzysztof Kozlowski [Thu, 2 Feb 2023 10:44:52 +0000 (11:44 +0100)]
arm64: dts: qcom: sm6115: correct TLMM gpio-ranges
Correct the number of GPIOs in TLMM pin controller.
Fixes:
97e563bf5ba1 ("arm64: dts: qcom: sm6115: Add basic soc dtsi")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Iskren Chernev <me@iskren.info>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230202104452.299048-11-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Thu, 2 Feb 2023 10:44:51 +0000 (11:44 +0100)]
arm64: dts: qcom: msm8953: correct TLMM gpio-ranges
Correct the number of GPIOs in TLMM pin controller.
Fixes:
9fb08c801923 ("arm64: dts: qcom: Add MSM8953 device tree")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Luca Weiss <luca@z3ntu.xyz>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230202104452.299048-10-krzysztof.kozlowski@linaro.org
Jamie Douglass [Thu, 2 Feb 2023 05:48:19 +0000 (16:48 +1100)]
arm64: dts: qcom: msm8992-lg-bullhead: Correct memory overlaps with the SMEM and MPSS memory regions
The memory region reserved by a previous commit (see fixes tag below)
overlaps with the SMEM and MPSS memory regions, causing error messages in
dmesg:
OF: reserved mem: OVERLAP DETECTED!
reserved@
5000000 (0x0000000005000000--0x0000000007200000)
overlaps with smem_region@
6a00000
(0x0000000006a00000--0x0000000006c00000)
OF: reserved mem: OVERLAP DETECTED!
reserved@
6c00000 (0x0000000006c00000--0x0000000007200000)
overlaps with memory@
7000000
(0x0000000007000000--0x000000000ca00000)
This patch resolves both of these by splitting the previously reserved
memory region into two sections either side of the SMEM region and by
cutting off the second memory region to 0x7000000.
Fixes:
22c7e1a0fa45 ("arm64: dts: msm8992-bullhead: add memory hole region")
Signed-off-by: Jamie Douglass <jamiemdouglass@gmail.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Tested-by: Petr Vorel <pvorel@suse.cz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230202054819.16079-1-jamiemdouglass@gmail.com
Krzysztof Kozlowski [Wed, 1 Feb 2023 15:43:20 +0000 (16:43 +0100)]
arm64: dts: qcom: sm8350-hdk: correct LT9611 pin function
SM8350 pin controller does not have "normal" pin function, so use
"gpio".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Fixes:
d96d8f9192be ("arm64: dts: qcom: sm8350-hdk: Enable lt9611uxc dsi-hdmi bridge")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230201154321.276419-2-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Wed, 1 Feb 2023 15:43:19 +0000 (16:43 +0100)]
arm64: dts: qcom: sm8350-hdk: align pin config node names with bindings
Bindings expect pins to be named with certain pattern.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Fixes:
d96d8f9192be ("arm64: dts: qcom: sm8350-hdk: Enable lt9611uxc dsi-hdmi bridge")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230201154321.276419-1-krzysztof.kozlowski@linaro.org
Luca Weiss [Mon, 23 Jan 2023 13:29:51 +0000 (14:29 +0100)]
arm64: dts: qcom: sm6350: Use specific qmpphy compatible
The sc7180 phy compatible works fine for some cases, but it turns out
sm6350 does need proper phy configuration in the driver, so use the
newly added sm6350 compatible.
Because the sm6350 compatible is using the new binding, we need to
change the node quite a bit to match it.
This fixes qmpphy init when no USB cable is plugged in during bootloader
stage.
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230120-sm6350-usbphy-v4-3-4d700a90ba16@fairphone.com
Bhupesh Sharma [Sat, 21 Jan 2023 20:04:54 +0000 (01:34 +0530)]
arm64: dts: qcom: sm6115: Add smp2p nodes
Add the adsp, cdsp and modem smp2p nodes to sm6115.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230121200454.1423567-1-bhupesh.sharma@linaro.org
Luca Weiss [Fri, 20 Jan 2023 13:13:47 +0000 (14:13 +0100)]
arm64: dts: qcom: sm7225-fairphone-fp4: Enable CCI busses
Enable the CCI busses that have cameras connected to them.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221213-sm6350-cci-v2-4-15c2c14c34bb@fairphone.com
Luca Weiss [Fri, 20 Jan 2023 13:13:46 +0000 (14:13 +0100)]
arm64: dts: qcom: sm6350: Add CCI nodes
Add nodes for the two CCI blocks found on SM6350.
The first contains two i2c busses and while the second one might also
contains two busses, the downstream kernel only has one configured, and
some boards use the GPIOs for the potential cci1_i2c1 one other
purposes, so leave that one unconfigured.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221213-sm6350-cci-v2-3-15c2c14c34bb@fairphone.com
Luca Weiss [Fri, 20 Jan 2023 13:13:45 +0000 (14:13 +0100)]
arm64: dts: qcom: sm6350: Add camera clock controller
Add a node for the camcc found on SM6350 SoC.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221213-sm6350-cci-v2-2-15c2c14c34bb@fairphone.com
Bjorn Andersson [Thu, 9 Feb 2023 04:09:15 +0000 (20:09 -0800)]
Merge branch '
20221213152617.296426-1-konrad.dybcio@linaro.org' into HEAD
Merge DT binding to gain Camera clock defines for SM6350
Konrad Dybcio [Tue, 13 Dec 2022 15:26:15 +0000 (16:26 +0100)]
dt-bindings: clock: add QCOM SM6350 camera clock bindings
Add device tree bindings for camera clock controller for
Qualcomm Technology Inc's SM6350 SoC.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221213152617.296426-1-konrad.dybcio@linaro.org
Krzysztof Kozlowski [Fri, 20 Jan 2023 07:21:12 +0000 (08:21 +0100)]
ARM: dts: qcom: align OPP table names with DT schema
DT schema expects names of operating points tables to match certain
pattern:
qcom-ipq4018-ap120c-ac.dtb: opp_table0: $nodename:0: 'opp_table0' does not match '^opp-table(-[a-z0-9]+)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230120072113.138656-1-krzysztof.kozlowski@linaro.org
Luca Weiss [Mon, 6 Feb 2023 20:40:18 +0000 (21:40 +0100)]
ARM: dts: qcom: msm8974-oneplus-bacon: Add notification LED
Add the node describing the sn3193 that's used to provide notification
LED.
Unfortunately the driver currently supports neither multicolor API nor
using the properties function & color, so we use label instead.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230122-msm8974-bacon-features-v2-5-06bb83c20a58@z3ntu.xyz
Luca Weiss [Mon, 6 Feb 2023 20:40:17 +0000 (21:40 +0100)]
ARM: dts: qcom: msm8974-oneplus-bacon: Add backlight
Add the node for the lm3630 that is used to control backlight.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230122-msm8974-bacon-features-v2-4-06bb83c20a58@z3ntu.xyz
Luca Weiss [Mon, 6 Feb 2023 20:40:16 +0000 (21:40 +0100)]
ARM: dts: qcom: msm8974-oneplus-bacon: Add volume keys and hall sensor
Add nodes for the volume buttons and the hall sensor that are found on
the device.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230122-msm8974-bacon-features-v2-3-06bb83c20a58@z3ntu.xyz
Luca Weiss [Mon, 6 Feb 2023 20:40:15 +0000 (21:40 +0100)]
ARM: dts: qcom: msm8974-oneplus-bacon: Add vibrator
Enable the pm8941 vibrator that's wired up on this device.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230122-msm8974-bacon-features-v2-2-06bb83c20a58@z3ntu.xyz
Luca Weiss [Mon, 6 Feb 2023 20:40:14 +0000 (21:40 +0100)]
ARM: dts: qcom: pm8941: Add vibrator node
Add the node describing the vibrator that's found on pm8941.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230122-msm8974-bacon-features-v2-1-06bb83c20a58@z3ntu.xyz
Krzysztof Kozlowski [Thu, 2 Feb 2023 10:44:50 +0000 (11:44 +0100)]
ARM: dts: qcom: sdx55: correct TLMM gpio-ranges
Correct the number of GPIOs in TLMM pin controller.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230202104452.299048-9-krzysztof.kozlowski@linaro.org
Bartosz Golaszewski [Wed, 1 Feb 2023 15:20:37 +0000 (16:20 +0100)]
dt-bindings: arm: qcom: add the sa8775p-ride board
Document the sa8775p SoC and its reference board: sa8775p-ride.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230201152038.203387-5-brgl@bgdev.pl
Dmitry Baryshkov [Sat, 21 Jan 2023 09:12:37 +0000 (11:12 +0200)]
ARM: dts: qcom: apq8064: add second DSI host and PHY
Add second DSI host and PHY available on the APQ8064 platform.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230121091237.2734272-1-dmitry.baryshkov@linaro.org
Krzysztof Kozlowski [Fri, 20 Jan 2023 17:40:36 +0000 (18:40 +0100)]
ARM: dts: qcom: apq8060-dragonboard: align MPP pin node names with DT schema
DT schema expects nodes ending with "pins:
qcom-apq8060-dragonboard.dtb: mpps@50: cm3605-mpps-state: 'oneOf' conditional failed, one must be fixed:
'mpp5' does not match any of the regexes: '-pins$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230120174036.351937-1-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Thu, 19 Jan 2023 10:54:34 +0000 (11:54 +0100)]
arm64: dts: qcom: sm8350: fixup SDHCI interconnect arguments
After switching interconnects to 2 cells, the SDHCI interconnects need
to get one more argument.
Fixes:
4f287e31ff5f ("arm64: dts: qcom: sm8350: Use 2 interconnect cells")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230119105434.51635-1-krzysztof.kozlowski@linaro.org
Richard Acayan [Wed, 1 Feb 2023 01:00:19 +0000 (20:00 -0500)]
arm64: dts: qcom: sdm670: add interconnects
The interconnects for Snapdragon 670 can be controlled. Add their
corresponding nodes in the device tree.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230201010020.84586-2-mailingradian@gmail.com
Jianhua Lu [Tue, 31 Jan 2023 12:35:15 +0000 (20:35 +0800)]
arm64: dts: qcom: sm8250: Add device tree for Xiaomi Mi Pad 5 Pro
Add support for Xiaomi Mi Pad 5 Pro, codename is xiaomi-elish.
This commit brings support for:
* ADSP/CDSP/SLPI/VENUS
* Backlight
* Battery fuel gauge
* Framebuffer
* PCIe0
* USB2.0
Signed-off-by: Jianhua Lu <lujianhua000@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230131123515.833-2-lujianhua000@gmail.com
Andrew Halaney [Mon, 30 Jan 2023 15:48:23 +0000 (09:48 -0600)]
arm64: dts: qcom: sa8540p-ride: Document i2c busses
It isn't obvious in the current devicetree what is connected. Go ahead
and document what's on the other end.
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Eric Chanudet <echanude@redhat.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230130154823.117542-2-ahalaney@redhat.com
Andrew Halaney [Mon, 30 Jan 2023 15:48:22 +0000 (09:48 -0600)]
arm64: dts: qcom: sa8540p-ride: Fix some i2c pinctrl settings
Some of the pinctrl groups were invalid for the selected pins. Select
the proper qup group to fix these warnings:
[ 6.523566] sc8280xp-tlmm
f100000.pinctrl: invalid group "gpio135" for function "qup15"
[ 6.535042] sc8280xp-tlmm
f100000.pinctrl: invalid group "gpio136" for function "qup15"
[ 6.597536] sc8280xp-tlmm
f100000.pinctrl: invalid group "gpio158" for function "qup15"
[ 6.597544] sc8280xp-tlmm
f100000.pinctrl: invalid group "gpio159" for function "qup15"
[ 6.597991] sc8280xp-tlmm
f100000.pinctrl: invalid group "gpio0" for function "qup15"
[ 6.597996] sc8280xp-tlmm
f100000.pinctrl: invalid group "gpio1" for function "qup15"
Fixes:
e073899ec3e1 ("arm64: dts: qcom: sa8540p-ride: add i2c nodes")
Reviewed-by: Shazad Hussain <quic_shazhuss@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230130154823.117542-1-ahalaney@redhat.com
Abel Vesa [Fri, 27 Jan 2023 13:14:41 +0000 (15:14 +0200)]
arm64: dts: qcom: sm8550: Fix the aoss_qmp node name
The proper name for it is power-management. Currently, with the node
name being power-controller, the bindings check fails due to the
property #power-domain-cells missing.
Fixes:
ffc50b2d3828 ("arm64: dts: qcom: Add base SM8550 dtsi")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230127131441.1157679-1-abel.vesa@linaro.org
Krzysztof Kozlowski [Fri, 27 Jan 2023 12:18:43 +0000 (13:18 +0100)]
arm64: dts: qcom: sm8550-mtp: correct vdd-l5-l16-supply
Fix typo in vdd-l5-l16 supply of qcom,pm8550-rpmh-regulators.
Fixes:
71342fb91eae ("arm64: dts: qcom: Add base SM8550 MTP dts")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230127121843.349738-1-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Fri, 27 Jan 2023 11:55:13 +0000 (12:55 +0100)]
arm64: dts: qcom: sm8550: add specific SMMU compatible
Generic SMMU compatibles are not allowed alone and we expect specific
one.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230127115513.268843-1-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Fri, 27 Jan 2023 11:43:47 +0000 (12:43 +0100)]
arm64: dts: qcom: sm8450: align RPMh regulator nodes with bindings
Device node names should be generic and bindings expect certain pattern
for RPMh regulator nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230127114347.235963-11-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Fri, 27 Jan 2023 11:43:46 +0000 (12:43 +0100)]
arm64: dts: qcom: sm8350: align RPMh regulator nodes with bindings
Device node names should be generic and bindings expect certain pattern
for RPMh regulator nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230127114347.235963-10-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Fri, 27 Jan 2023 11:43:45 +0000 (12:43 +0100)]
arm64: dts: qcom: sm8250: align RPMh regulator nodes with bindings
Device node names should be generic and bindings expect certain pattern
for RPMh regulator nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230127114347.235963-9-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Fri, 27 Jan 2023 11:43:44 +0000 (12:43 +0100)]
arm64: dts: qcom: sm8150: align RPMh regulator nodes with bindings
Device node names should be generic and bindings expect certain pattern
for RPMh regulator nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230127114347.235963-8-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Fri, 27 Jan 2023 11:43:43 +0000 (12:43 +0100)]
arm64: dts: qcom: sm7225: align RPMh regulator nodes with bindings
Device node names should be generic and bindings expect certain pattern
for RPMh regulator nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230127114347.235963-7-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Fri, 27 Jan 2023 11:43:42 +0000 (12:43 +0100)]
arm64: dts: qcom: sdm845: align RPMh regulator nodes with bindings
Device node names should be generic and bindings expect certain pattern
for RPMh regulator nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230127114347.235963-6-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Fri, 27 Jan 2023 11:43:41 +0000 (12:43 +0100)]
arm64: dts: qcom: sc8280xp: align RPMh regulator nodes with bindings
Device node names should be generic and bindings expect certain pattern
for RPMh regulator nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230127114347.235963-5-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Fri, 27 Jan 2023 11:43:40 +0000 (12:43 +0100)]
arm64: dts: qcom: sc7180: align RPMh regulator nodes with bindings
Device node names should be generic and bindings expect certain pattern
for RPMh regulator nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230127114347.235963-4-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Fri, 27 Jan 2023 11:43:39 +0000 (12:43 +0100)]
arm64: dts: qcom: sa8295p-adp: align RPMh regulator nodes with bindings
Device node names should be generic and bindings expect certain pattern
for RPMh regulator nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230127114347.235963-3-krzysztof.kozlowski@linaro.org
Amit Pundir [Fri, 27 Jan 2023 06:33:55 +0000 (12:03 +0530)]
arm64: dts: qcom: sdm845-xiaomi-beryllium: Add reserved memory region
Put cont splash memory region under the reserved-memory as
confirmed by the downstream code for both Tianma and EBBG variants.
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230127063355.1775246-1-amit.pundir@linaro.org
Caleb Connolly [Wed, 25 Jan 2023 23:18:28 +0000 (23:18 +0000)]
arm64: dts: qcom: sdm845-oneplus-*: add audio devices
Populate the audio devices found on the OnePlus 6 and 6T using the
sdm845-sndcard driver.
Both devices have the earpiece and headphone jack connected to the
WCD9341 codec. The OnePlus 6 uses the MAX98927 speaker codec which is
already supported upstream. The OnePlus 6T uses a currently unsupported
TFA9894 codec.
Two internal microphones are supported, as well as an external headset
mic. Each DAI link is expected to be used for a single device.
Alsa UCM2 configs for this setup can be found here, they are not yet
upstream and include support for call audio which is missing in this
patch
https://gitlab.com/sdm845-mainline/alsa-ucm-conf/-/tree/
9ed12836b269764c4a853411d38ccb6abb70b383/ucm2/OnePlus
Co-developed-by: Dylan Van Assche <me@dylanvanassche.be>
Signed-off-by: Dylan Van Assche <me@dylanvanassche.be>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230125231829.2621768-1-caleb.connolly@linaro.org
Krzysztof Kozlowski [Mon, 23 Jan 2023 08:43:00 +0000 (09:43 +0100)]
arm64: dts: qcom: sdm845-audio-wcd9340: commonize clocks
Clock for WCD9340 is coming from the SoC and is the same in all users,
so move it to common file to reduce the code duplication (which still
allows further customizations per board).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230123084300.22353-6-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Mon, 23 Jan 2023 08:42:59 +0000 (09:42 +0100)]
arm64: dts: qcom: sdm845-audio-wcd9340: commonize pinctrl
Pin configuration fow WCD9340 is the same in all users, so move it to
common file to reduce the code duplication (which still allows further
customizations per board).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230123084300.22353-5-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Mon, 23 Jan 2023 08:42:58 +0000 (09:42 +0100)]
arm64: dts: qcom: sdm845: move codec to separate file
Re-organize SDM845 audio codec into separate, audio DTSI which
should be included and customized by the SDM845 boards wanting audio.
The codec node is anyway not a property of the SoC, but the boards.
On all others boards not using audio, keep the Slimbus node disabled as
it is empty.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230123084300.22353-4-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Mon, 23 Jan 2023 08:42:57 +0000 (09:42 +0100)]
arm64: dts: qcom: sdm850-lenovo-yoga: correct sound compatible
There is dedicated compatible for Lenovo Yoga C630 sound card
(documented in bindings and used by Linux driver), so use it along with
a generic sound card fallback. The device is actually fully compatible
with the generic one.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230123084300.22353-3-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Mon, 23 Jan 2023 08:42:56 +0000 (09:42 +0100)]
arm64: dts: qcom: sdm845-xiaomi-beryllium: add generic sound compatible
Use generic sound card fallback compatible, because the device is
actually fully compatible with the generic one.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230123084300.22353-2-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Mon, 23 Jan 2023 08:42:55 +0000 (09:42 +0100)]
arm64: dts: qcom: sdm845-db845c: add generic sound compatible
Use generic sound card fallback compatible, because the device is
actually fully compatible with the generic one.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230123084300.22353-1-krzysztof.kozlowski@linaro.org
Konrad Dybcio [Tue, 24 Jan 2023 16:46:16 +0000 (17:46 +0100)]
arm64: dts: qcom: sm8250: Disable wsamacro and swr0 by default
They are not used on all boards, so disable them by default.
Enable them back on MTP/RB5, which were the only current users.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230124164616.228619-1-konrad.dybcio@linaro.org
Krzysztof Kozlowski [Tue, 24 Jan 2023 08:49:51 +0000 (09:49 +0100)]
arm64: dts: qcom: sm8550: drop incorrect cells from serial
The serial/UART device node does not have children with unit addresses,
so address/size cells are not correct.
Fixes:
377972ac743f ("arm64: dts: qcom: sm8550: add I2C Master Hub nodes")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230124084951.38195-4-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Tue, 24 Jan 2023 08:49:50 +0000 (09:49 +0100)]
arm64: dts: qcom: sm8450: drop incorrect cells from serial
The serial/UART device node does not have children with unit addresses,
so address/size cells are not correct.
Fixes:
f5837418479a ("arm64: dts: qcom: sm8450: add uart20 node")
Fixes:
5188049c9b36 ("arm64: dts: qcom: Add base SM8450 DTSI")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230124084951.38195-3-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Tue, 24 Jan 2023 08:49:49 +0000 (09:49 +0100)]
arm64: dts: qcom: sm8350: drop incorrect cells from serial
The serial/UART device node does not have children with unit addresses,
so address/size cells are not correct.
Fixes:
cf03cd7e12bd ("arm64: dts: qcom: sm8350: Set up WRAP0 QUPs")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230124084951.38195-2-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Tue, 24 Jan 2023 08:49:48 +0000 (09:49 +0100)]
arm64: dts: qcom: use generic node name for Bluetooth
Node names should be generic (as Devicetree spec mandates), so use
"bluetooth" for BT node.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230124084951.38195-1-krzysztof.kozlowski@linaro.org
Konrad Dybcio [Mon, 23 Jan 2023 20:05:52 +0000 (21:05 +0100)]
arm64: dts: qcom: sm8450: Fix DSIn PHY compatible
Use the correct compatible so that the driver can probe properly.
Fixes:
a6dd1206e45a ("arm64: dts: qcom: sm8450: add display hardware devices")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on HDK8450
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230123200552.553181-1-konrad.dybcio@linaro.org
Robert Marko [Mon, 23 Jan 2023 10:16:31 +0000 (11:16 +0100)]
arm64: dts: qcom: ipq8074: add QFPROM node
IPQ8074 has efuses like other Qualcomm SoC-s that are required for
determining various HW quirks which will be required later for CPR etc,
so lets add the QFPROM node for start.
Individidual fuses will be added as they are required.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230123101631.475712-2-robimarko@gmail.com
Johan Hovold [Mon, 23 Jan 2023 10:16:07 +0000 (11:16 +0100)]
arm64: dts: qcom: sm8550: fix USB-DP PHY resets
The USB-DP PHY resets have been switched.
Fixes:
7f7e5c1b037f ("arm64: dts: qcom: sm8550: Add USB PHYs and controller nodes")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230123101607.2413-1-johan+linaro@kernel.org
Dmitry Baryshkov [Fri, 20 Jan 2023 06:14:16 +0000 (08:14 +0200)]
arm64: dts: qcom: msm8996: add CBF device entry
Add device tree node for the CBF clock.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230120061417.2623751-8-dmitry.baryshkov@linaro.org
Dmitry Baryshkov [Fri, 20 Jan 2023 06:14:15 +0000 (08:14 +0200)]
arm64: dts: qcom: msm8996 switch from RPM_SMD_BB_CLK1 to RPM_SMD_XO_CLK_SRC
The vendor kernel uses RPM_SMD_XO_CLK_SRC clock as an CXO clock rather
than using the RPM_SMD_BB_CLK1 directly. Follow this example and switch
msm8996.dtsi to use RPM_SMD_XO_CLK_SRC clock instead of RPM_SMB_BB_CLK1.
Fixes:
2b8c9c77c268 ("arm64: dts: qcom: msm8996: convert xo_board to RPM_SMD_BB_CLK1")
Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230120061417.2623751-7-dmitry.baryshkov@linaro.org
Jianhua Lu [Tue, 31 Jan 2023 12:35:14 +0000 (20:35 +0800)]
dt-bindings: arm: qcom: Add Xiaomi Mi Pad 5 Pro (xiaomi-elish)
Add a compatible for Xiaomi Mi Pad 5 Pro.
Signed-off-by: Jianhua Lu <lujianhua000@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230131123515.833-1-lujianhua000@gmail.com
Krzysztof Kozlowski [Fri, 27 Jan 2023 11:43:38 +0000 (12:43 +0100)]
ARM: dts: qcom-sdx65: align RPMh regulator nodes with bindings
Device node names should be generic and bindings expect certain pattern
for RPMh regulator nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230127114347.235963-2-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Fri, 27 Jan 2023 11:43:37 +0000 (12:43 +0100)]
ARM: dts: qcom-sdx55: align RPMh regulator nodes with bindings
Device node names should be generic and bindings expect certain pattern
for RPMh regulator nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230127114347.235963-1-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Fri, 27 Jan 2023 09:53:19 +0000 (10:53 +0100)]
ARM: dts: qcom: use "okay" for status
"okay" over "ok" is preferred:
serial@
f991f000: status:0: 'ok' is not one of ['okay', 'disabled', 'reserved']
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230127095319.64560-1-krzysztof.kozlowski@linaro.org
Manivannan Sadhasivam [Mon, 23 Jan 2023 13:19:31 +0000 (18:49 +0530)]
ARM: dts: qcom: sdx65: Add Qcom SMMU-500 as the fallback for IOMMU node
SDX65 uses the Qcom version of the SMMU-500 IP. So use "qcom,smmu-500"
compatible as the fallback to the SoC specific compatible.
Cc: <stable@vger.kernel.org> # 5.19
Fixes:
98187f7b74bf ("ARM: dts: qcom: sdx65: Enable ARM SMMU")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230123131931.263024-4-manivannan.sadhasivam@linaro.org
Manivannan Sadhasivam [Mon, 23 Jan 2023 13:19:30 +0000 (18:49 +0530)]
ARM: dts: qcom: sdx55: Add Qcom SMMU-500 as the fallback for IOMMU node
SDX55 uses the Qcom version of the SMMU-500 IP. So use "qcom,smmu-500"
compatible as the fallback to the SoC specific compatible.
Cc: <stable@vger.kernel.org> # 5.12
Fixes:
a2bdfdfba2af ("ARM: dts: qcom: sdx55: Enable ARM SMMU")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230123131931.263024-3-manivannan.sadhasivam@linaro.org
Dmitry Baryshkov [Thu, 19 Jan 2023 14:43:26 +0000 (16:43 +0200)]
arm64: dts: qcom: msm8996: enable UFS interconnects
Specify interconnects to be used by the UFS host controller.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230119144326.2492847-3-dmitry.baryshkov@linaro.org
Dmitry Baryshkov [Thu, 19 Jan 2023 13:22:19 +0000 (15:22 +0200)]
ARM: dts: qcom: apq8064: use hdmi_phy for the MMCC's hdmipll clock
Link hdmi_phy as a clock provider of "hdmipll" clock to the MMCC.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230119132219.2479775-7-dmitry.baryshkov@linaro.org
Dmitry Baryshkov [Thu, 19 Jan 2023 13:22:18 +0000 (15:22 +0200)]
ARM: dts: qcom: apq8064: add #clock-cells to the HDMI PHY node
Add #clock-cells property to the HDMI PHY device node to let other nodes
resolve the hdmipll clock.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230119132219.2479775-6-dmitry.baryshkov@linaro.org
Bhupesh Sharma [Thu, 19 Jan 2023 12:32:00 +0000 (18:02 +0530)]
arm64: dts: qcom: sm6115: Add watchdog node to dtsi
Add watchdog node in Qualcomm sm6115 SoC dtsi.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230119123200.1021735-1-bhupesh.sharma@linaro.org