drm/nouveau: stop using TTMs fault callback

We already implemented the fault handler ourself,
just open code what is necessary here.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/392323/

drm/amdgpu: stop using TTMs fault callback

Implement the fault handler ourself using the provided TTM functions.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/392324/

drm/radeon: stop using TTMs fault callback

We already implemented the fault handler ourself,
just open code what is necessary here.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/392322/

drm/ttm: move SG flag check into ttm_bo_vm_reserve

Just check earlier if a BO can be page faulted in the first place.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/392321/

drm/ingenic: Add support for paletted 8bpp

On JZ4725B and newer, the F0 plane supports paletted 8bpp with a
256-entry palette. Add support for it.

v3: Only accept a full 256-entry palette.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200927193645.262612-2-paul@crapouillou.net

drm/ingenic: Add support for 24-bit modes

Starting from the JZ4725B SoC, the primary and overlay planes support
24-bit pixel modes (8 bits per color component, without dummy byte).
Add support for these in the ingenic-drm driver.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200926170501.1109197-8-paul@crapouillou.net

drm/ingenic: Add support for 30-bit modes

Starting from the JZ4760 SoC, the primary and overlay planes support
30-bit pixel modes (10 bits per color component). Add support for these
in the ingenic-drm driver.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200926170501.1109197-7-paul@crapouillou.net

drm/ingenic: Support handling different pixel formats in F0/F1 planes

Until now the ingenic-drm driver supported the same pixel formats on the
F0 and F1 planes, and across all SoCs. However, the F0 plane does support
paletted 8bpp, while the F1 plane doesn't.

Furthermore, the three SoCs currently supported all have different pixel
formats available; 24bpp was added in JZ4725B, 30bpp was added in
JZ4770.

Prepare the inclusion of paletted 8bpp, 24bpp and 30bpp support by
having separate pixel format lists for F0 and F1 planes.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200926170501.1109197-5-paul@crapouillou.net

drm/ingenic: Alloc F0 and F1 DMA descriptors at once

Instead of calling dmam_alloc_coherent() once for each 4-bit DMA
hardware descriptor, we can have them both in a physical memory page, as
long as they are aligned to 16 bytes. This reduces memory consumption,
and will make it easier to add more DMA descriptors in the future.

Note that the old code would not create the F0 descriptor on SoCs that
don't support multiple planes. We don't care, because:
- we don't use more memory by allocating two descriptors instead of a
  single one;
- the only SoC that does not support multiple planes (JZ4740) still has
  two independent DMA channels, for an unknown reason.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200926170501.1109197-4-paul@crapouillou.net

drm/ingenic: Add support for reserved memory

Add support for static memory reserved from Device Tree. Since we're
using GEM buffers backed by CMA, it is interesting to have an option to
specify the CMA area where the GEM buffers will be allocated.

v2: Don't abort probe if reserved memory cannot be obtained. The driver
    will still work fine provided the kernel configuration is sane.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200926170501.1109197-3-paul@crapouillou.net

drm/ingenic: Reset pixclock rate when parent clock rate changes

Old Ingenic SoCs can overclock very well, up to +50% of their nominal
clock rate, whithout requiring overvolting or anything like that, just
by changing the rate of the main PLL. Unfortunately, all clocks on the
system are derived from that PLL, and when the PLL rate is updated, so
is our pixel clock.

To counter that issue, we make sure that the panel is in VBLANK before
the rate change happens, and we will then re-set the pixel clock rate
afterwards, once the PLL has been changed, to be as close as possible to
the pixel rate requested by the encoder.

v2: Add comment about mutex usage

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200926170501.1109197-2-paul@crapouillou.net

fbdev: sbuslib: remove compat_alloc_user_space usage

This is one of the last users of compat_alloc_user_space()
and copy_in_user(). The actual handler is implemented in the
same file and could be shared, but as I couldn't test this
properly I leave the native case alone and just make a straight
copy of it for the compat case, with a minimum set of
modifications.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200918100926.1447563-3-arnd@arndb.de

fbdev: sbuslib: remove unused FBIOSCURSOR32 helper

No driver implements FBIOSCURSOR, so this function has no purpose
and can be removed. Apparently it was added in linux-2.1.44 to handle
compatibility for drivers/sbus/char/sunfb.c but lost its purpose when
that driver got rewritten in linux-2.5.63.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200918100926.1447563-2-arnd@arndb.de

fbdev: simplify fb_getput_cmap()

This function is one of the remaining users of compat_alloc_user_space()
and copy_in_user().

Clean it up by copying to a local data structure copy instead,
which also leads to more readable code.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200918100926.1447563-1-arnd@arndb.de

drm/vram-helper: Don't put new BOs into VRAM

Most drivers that use VRAM helpers have only a few MiB of framebuffer
memory available. To reduce fragmentation, new BOs are now put into
system memory by default. Only pin operations are allowed to move BOs
into VRAM.

v2:
* rebased onto latest drm-tip

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200922145700.25413-4-tzimmermann@suse.de

drm/vram-helper: Set object function iff they are not provided by driver

Don't override the GEM object functions unconditionally. If the driver
sets the GEM functions, VRAM helpers will not set them. The idea has been
taken from SHMEM helpers.

v2:
* updated the commit message (Sam)
* document the new feature for drm_gem_vram_create()

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200922145700.25413-3-tzimmermann@suse.de

drm/vram-helper: Integrate drm_gem_vram_init() into drm_gem_vram_create()

The drm_gem_vram_create() function is the only caller of the internal
helper drm_gem_vram_init(). Streamline the code by putting all code into
the create function.

v2:
* rebased onto latest drm-tip
* fixed typo in commit message (Sam)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200922145700.25413-2-tzimmermann@suse.de

drm: Remove obsolete GEM and PRIME callbacks from struct drm_driver

Several GEM and PRIME callbacks have been deprecated in favor of
per-instance GEM object functions. Remove the callbacks as they are
now unused. The only exception is .gem_prime_mmap, which is still
in use by several drivers.

What is also gone is gem_vm_ops in struct drm_driver. All drivers now
use struct drm_gem_object_funcs.vm_ops instead.

While at it, the patch also improves error handling around calls
to .free and .get_sg_table callbacks.

v3:
* restore default call to drm_gem_prime_export() in
  drm_gem_prime_handle_to_fd()
* return -ENOSYS if get_sg_table is not set
* drop all checks for obj->funcs
* clean up TODO list and documentation
v2:
* update related TODO item (Sam)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-23-tzimmermann@suse.de

drm/xlnx: Initialize DRM driver instance with CMA helper macro

The xlnx driver uses CMA helpers with default callback functions.
Initialize the driver structure with the rsp CMA helper macro. The
driver is being converted to use GEM object functions as part of
this change.

Two callbacks, .dumb_destroy and .gem_prime_import, were initialized
to their default implementations, so they are just kept empty now.

v2:
* initialize with DRM_GEM_CMA_DRIVER_OPS_WITH_DUMB_CREATE (Laurent)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hyun Kwon <hyun.kwon@xilinx.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-22-tzimmermann@suse.de

drm/xen: Introduce GEM object functions

GEM object functions deprecate several similar callback interfaces in
struct drm_driver. This patch replaces the per-driver callbacks with
per-instance callbacks in xen. The only exception is gem_prime_mmap,
which is non-trivial to convert.

v2:
* convert xen_drm_drv_free_object_unlocked() to static
  callback (Oleksandr)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-21-tzimmermann@suse.de

drm/vkms: Introduce GEM object functions

GEM object functions deprecate several similar callback interfaces in
struct drm_driver. This patch replaces the per-driver callbacks with
per-instance callbacks in vkms.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Melissa Wen <melissa.srw@gmail.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-20-tzimmermann@suse.de

drm/virtgpu: Set PRIME export function in struct drm_gem_object_funcs

GEM object functions deprecate several similar callback interfaces in
struct drm_driver. This patch replaces virtgpu's per-driver PRIME export
function with a per-object function.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-19-tzimmermann@suse.de

drm/vgem: Introduce GEM object functions

GEM object functions deprecate several similar callback interfaces in
struct drm_driver. This patch replaces the per-driver callbacks with
per-instance callbacks in vgem. The only exception is gem_prime_mmap,
which is non-trivial to convert.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Melissa Wen <melissa.srw@gmail.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-18-tzimmermann@suse.de

drm/vc4: Introduce GEM object functions

GEM object functions deprecate several similar callback interfaces in
struct drm_driver. This patch replaces the per-driver callbacks with
per-instance callbacks in vc4. The only exception is gem_prime_mmap,
which is non-trivial to convert.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-17-tzimmermann@suse.de

drm/tegra: Introduce GEM object functions

GEM object functions deprecate several similar callback interfaces in
struct drm_driver. This patch replaces the per-driver callbacks with
per-instance callbacks in tegra.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-16-tzimmermann@suse.de

drm/rockchip: Convert to drm_gem_object_funcs

GEM object functions deprecate several similar callback interfaces in
struct drm_driver. This patch replaces the per-driver callbacks with
per-instance callbacks in rockchip. The only exception is gem_prime_mmap,
which is non-trivial to convert.

v3:
* update documentation

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-15-tzimmermann@suse.de

drm/radeon: Introduce GEM object functions

GEM object functions deprecate several similar callback interfaces in
struct drm_driver. This patch replaces the per-driver callbacks with
per-instance callbacks in radeon.

v2:
* move object-function instance to radeon_gem.c (Christian)
* set callbacks in radeon_gem_object_create() (Christian)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-14-tzimmermann@suse.de

drm/pl111: Introduce GEM object functions

GEM object functions deprecate several similar callback interfaces in
struct drm_driver. This patch replaces the per-driver callbacks with
per-instance callbacks in pl111. The only exception is gem_prime_mmap,
which is non-trivial to convert.

v2:
* use drm_gem_cma_create_object_default_funcs() (Eric)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-13-tzimmermann@suse.de

drm/omapdrm: Introduce GEM object functions

GEM object functions deprecate several similar callback interfaces in
struct drm_driver. This patch replaces the per-driver callbacks with
per-instance callbacks in omapdrm.

v2:
* make omap_gem_free_object() static (Tomi)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-12-tzimmermann@suse.de

drm/nouveau: Introduce GEM object functions

GEM object functions deprecate several similar callback interfaces in
struct drm_driver. This patch replaces the per-driver callbacks with
per-instance callbacks in nouveau.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-11-tzimmermann@suse.de

drm/msm: Introduce GEM object funcs

GEM object functions deprecate several similar callback interfaces in
struct drm_driver. This patch replaces the per-driver callbacks with
per-instance callbacks in msm. The only exception is gem_prime_mmap,
which is non-trivial to convert.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-10-tzimmermann@suse.de

drm/mediatek: Introduce GEM object functions

GEM object functions deprecate several similar callback interfaces in
struct drm_driver. This patch replaces the per-driver callbacks with
per-instance callbacks in mediatek. The only exception is gem_prime_mmap,
which is non-trivial to convert.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-9-tzimmermann@suse.de

drm/imx/dcss: Initialize DRM driver instance with CMA helper macro

The i.MX DCSS driver uses CMA helpers with default callback functions.
Initialize the driver structure with the rsp CMA helper macro. The
driver is being converted to use GEM object functions as part of
this change.

Two callbacks, .gem_prime_export and .gem_prime_import, were initialized
to their default implementations, so they are just kept empty now.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-8-tzimmermann@suse.de

drm/i915: Introduce GEM object functions

GEM object functions deprecate several similar callback interfaces in
struct drm_driver. This patch replaces the per-driver callbacks with
per-instance callbacks in i915.

v2:
* move object-function instance to i915_gem_object.c (Jani)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-7-tzimmermann@suse.de

drm/gma500: Introduce GEM object functions

GEM object functions deprecate several similar callback interfaces in
struct drm_driver. This patch replaces the per-driver callbacks with
per-instance callbacks in gma500.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-6-tzimmermann@suse.de

drm/exynos: Introduce GEM object functions

GEM object functions deprecate several similar callback interfaces in
struct drm_driver. This patch replaces the per-driver callbacks with
per-instance callbacks in exynos. The only exception is gem_prime_mmap,
which is non-trivial to convert.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-5-tzimmermann@suse.de

drm/etnaviv: Introduce GEM object functions

GEM object functions deprecate several similar callback interfaces in
struct drm_driver. This patch replaces the per-driver callbacks with
per-instance callbacks in etnaviv. The only exception is gem_prime_mmap,
which is non-trivial to convert.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-4-tzimmermann@suse.de

drm/armada: Introduce GEM object functions

GEM object functions deprecate several similar callback interfaces in
struct drm_driver. This patch replaces the per-driver callbacks with
per-instance callbacks in armada.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-3-tzimmermann@suse.de

drm/amdgpu: Introduce GEM object functions

GEM object functions deprecate several similar callback interfaces in
struct drm_driver. This patch replaces the per-driver callbacks with
per-instance callbacks in amdgpu. The only exception is gem_prime_mmap,
which is non-trivial to convert.

v3:
* remove amdgpu_object.c from patch (Christian)
v2:
* move object-function instance to amdgpu_gem.c (Christian)
* set callbacks in amdgpu_gem_object_create() (Christian)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-2-tzimmermann@suse.de

drm/hisilicon: Features to support reading resolutions from EDID

Use drm_get_edid to get the resolution, if that fails, set it to
a fixed resolution. Rewrite the desrtoy callback function to release
resources.

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1600778670-60370-3-git-send-email-tiantao6@hisilicon.com

drm/hisilicon: Support i2c driver algorithms for bit-shift adapters

Adding driver implementation to support i2c driver algorithms for
bit-shift adapters, so hibmc will using the interface provided by
drm to read edid.

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1600778670-60370-2-git-send-email-tiantao6@hisilicon.com

drm/panel: otm8009a: allow using non-continuous dsi clock

The panel is able to work when dsi clock is non-continuous, thus
the system power consumption can be reduced using such feature.

Add MIPI_DSI_CLOCK_NON_CONTINUOUS to panel's mode_flags.

Changes in v2:
  - Added my signed-off

Signed-off-by: Antonio Borneo <antonio.borneo@st.com>
Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200922074253.28810-1-yannick.fertre@st.com

drm/panel: otm8009a: remove hack to force commands in HS

The panel is able to receive commands in LP. The current hack to
force backlight commands in HS was due to workaround an incorrect
settings on DSI controller that prevents sending LP commands while
video out was active.

Remove the hack that forces HS commands.

Changes in v2:
  - Added my signed-off

Signed-off-by: Antonio Borneo <antonio.borneo@st.com>
Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200922074242.28719-1-yannick.fertre@st.com

fbdev: mx3fb: remove unused variable 'irq'

Remove the variable 'irq' that is set but never used.

Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1600334360-4214-1-git-send-email-tanxiaofei@huawei.com

drm/panel: rm68200: allow using non-continuous dsi clock

The panel is able to work when dsi clock is non-continuous, thus
the system power consumption can be reduced using such feature.

Add MIPI_DSI_CLOCK_NON_CONTINUOUS to panel's mode_flags.

Signed-off-by: Antonio Borneo <antonio.borneo@st.com>
Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200918114736.11322-1-yannick.fertre@st.com

drm/radeon/ttm: handle ttm moves properly

The core move code currently handles use_tt moves, for radeon
this was being handled also in the driver, but not using the same
paths.

If moving between TT/SYSTEM (all the use_tt paths on radeon) use
the core move function.

Eventually the core will be flipped over to calling the driver.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200924051845.397177-5-airlied@gmail.com

drm/amdgpu/ttm: handle tt moves properly.

The core move code currently handles use_tt moves, for amdgpu
this was being handled also in the driver, but not using the same
paths.

If moving between TT/SYSTEM (all the use_tt paths on amdgpu) use
the core move function.

Eventually the core will be flipped over to calling the driver.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200924051845.397177-4-airlied@gmail.com

drm/ttm: handle the SYSTEM->TT path in same place as others.

This just consolidates the code making the flow easier to understand
and also helps when moving move to the driver side.

Reviewed-by: Christian König <christian.koenig@amd.com>.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200924051845.397177-3-airlied@gmail.com

drm/panel: simplify the return expression of td028ttec1_prepare

Simplify the return expression.

Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200921131018.91513-1-miaoqinglang@huawei.com

drm/ttm: remove TTM_PL_FLAG_NO_EVICT

Not used any more.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/391604/?series=81973&rev=1

drm/ttm: remove ttm_bo_create

Not used any more.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/391616/?series=81973&rev=1

drm/amdgpu: switch over to the new pin interface

Stop using TTM_PL_FLAG_NO_EVICT.

Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/391617/?series=81973&rev=1

drm/radeon: switch over to the new pin interface

Stop using TTM_PL_FLAG_NO_EVICT.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/391610/?series=81973&rev=1

drm/qxl: switch over to the new pin interface

Stop using TTM_PL_FLAG_NO_EVICT.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/391607/?series=81973&rev=1

drm/vram-helper: switch over to the new pin interface

Stop using TTM_PL_FLAG_NO_EVICT.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/391603/?series=81973&rev=1

drm/nouveau: switch over to the new pin interface

Stop using TTM_PL_FLAG_NO_EVICT.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/391606/?series=81973&rev=1

drm/vmwgfx: switch over to the new pin interface v2

Stop using TTM_PL_FLAG_NO_EVICT.

v2: fix unconditional pinning

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/391601/?series=81973&rev=1

drm/vmwgfx: stop using ttm_bo_create v2

Implement in the driver instead since it is the only user of that function.

v2: fix usage of ttm_bo_init_reserved

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/391614/?series=81973&rev=1

drm/vmwgfx: remove unused placement combination

Just some dead code cleanup.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/391599/?series=81973&rev=1

drm/ttm: add ttm_bo_pin()/ttm_bo_unpin() v2

As an alternative to the placement flag add a
pin count to the ttm buffer object.

v2: add dma_resv_assert_help() calls

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/391596/?series=81973&rev=1

drm/ast: Reload gamma LUT after changing primary plane's color format

The gamma LUT has to be reloaded after changing the primary plane's
color format. This used to be done implicitly by the CRTC atomic_enable()
helper after updating the primary plane. With the recent reordering of
the steps, the primary plane's setup was moved last and invalidated
the gamma LUT. Fix this by setting the LUT from within atomic_flush().

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes: 2f0ddd89fe32 ("drm/ast: Enable CRTC before planes")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200922144655.23624-1-tzimmermann@suse.de

drm/ttm: remove persistent_swap_storage

Not used any more. Cleanup the code as well while at it.

Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/391079/?series=81804&rev=1
Reviewed-by: Dave Airlie <airlied@redhat.com>

drm/nouveau: stop using persistent_swap_storage

According to Ben this is most likely just a leftover.

Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/391078/?series=81804&rev=1
Reviewed-by: Dave Airlie <airlied@redhat.com>

drm/dp: add a number of DP 2.0 DPCD definitions

Prepare for future with DP 2.0 DPCD definitions, with a couple of
related drive-by cleanups. No functional changes.

v2: Send the version that actually builds.

Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200918114017.30198-2-jani.nikula@intel.com

drm/dp: add subheadings to DPCD address definitions

Add the subheadings from the DP spec. No functional changes.

Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200918114017.30198-1-jani.nikula@intel.com

drm/ttm: add bo wait that takes a ctx wrapper.

I'm thinking of pushing the wait into the drivers.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923030454.362731-6-airlied@gmail.com

drm/nouveau/ttm: plumb ctx through move functions.

This just uses the ctx instead of passing bools and recreating it.

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923030454.362731-5-airlied@gmail.com

drm/radeon: cleanup ttm operation ctx usage.

Just pass it around move, and remove unused pieces

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923030454.362731-4-airlied@gmail.com

drm/qxl: kill unused bo wait wrapper

This wasn't used anywheere

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923030454.362731-3-airlied@gmail.com

drm/radeon: kill radeon_bo_wait

this is unused

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923030454.362731-2-airlied@gmail.com

drm/doc: Document that modifiers are always required for fb

Even for legacy userspace, since otherwise GETFB2 is broken and if you
switch between modifier-less and modifier-aware compositors, smooth
transitions break.

Also it's just best practice to make sure modifiers are invariant for
a given drm_fb, and that a modifier-aware kms drivers only has one
place to store them, ignoring any old implicit bo flags or whatever
else might float around.

Motivated by some irc discussion with Bas about amdgpu modifier
support.

Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Simon Ser <contact@emersion.fr>
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Fixes: 455e00f1412f ("drm: Add getfb2 ioctl")
Cc: Daniel Stone <daniels@collabora.com>
Cc: Juston Li <juston.li@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: Marek Olšák <maraeo@gmail.com>
Cc: "Wentland, Harry" <harry.wentland@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200917164721.2038541-1-daniel.vetter@ffwll.ch

drm/ttm: stop dangerous caching attribute change

When we swapout/in a BO we try to change the caching
attributes of the pages before/after doing the copy.

On x86 this is done by calling set_pages_uc(),
set_memory_wc() or set_pages_wb() for not highmem pages
to update the linear mapping of the page.

On all other platforms we do exactly nothing.

Now on x86 this is unnecessary because copy_highpage() will
either create a temporary mapping of the page which is wb
anyway and destroyed immediately again or use the linear
mapping with the correct caching attributes.

So stop this nonsense and just keep the caching as it is and
return an error when a driver tries to change the caching of
an already populated TT object.

This is much more defensive since changing caching
attributes is platform and driver specific and usually
doesn't work after the page was initially allocated.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/391293/

drm/ttm: remove nonsense AGP handling

map_page_into_agp() and unmap_page_from_agp() are only defined on x86.

On all other platforms they are defined as noops. So this code doesn't has any effect at all.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/391292/

drm/dp_mst: Retrieve extended DPCD caps for topology manager

As per DP-1.3, First check DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT.
If DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT is 1,read the DP_DP13_DPCD_REV to
get the faster capability.
If DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT is 0,read DP_DPCD_REV.

Signed-off-by: Koba Ko <koba.ko@canonical.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
[added aux name to drm_dbg_kms() call]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200922065313.4794-1-koba.ko@canonical.com

vga_switcheroo: simplify the return expression of vga_switcheroo_runtime_resume

Simplify the return expression.

Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200921131110.93365-1-miaoqinglang@huawei.com

drm/gma500: clean up indentation issues

There are a couple of statements that are indented too deeply,
remove the extraneous tabs and also an empty line.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200920141407.32672-1-colin.king@canonical.com

drm/vram-helper: Fix use of top-down placement

Commit 7053e0eab473 ("drm/vram-helper: stop using TTM placement flags")
cleared the BO placement flags if top-down placement had been selected.
Hence, BOs that were supposed to go into VRAM are now placed in a default
location in system memory.

Trying to scanout the incorrectly pinned BO results in displayed garbage
and an error message.

[  146.108127] ------------[ cut here ]------------
[  146.1V08180] WARNING: CPU: 0 PID: 152 at drivers/gpu/drm/drm_gem_vram_helper.c:284 drm_gem_vram_offset+0x59/0x60 [drm_vram_helper]
...
[  146.108591]  ast_cursor_page_flip+0x3e/0x150 [ast]
[  146.108622]  ast_cursor_plane_helper_atomic_update+0x8a/0xc0 [ast]
[  146.108654]  drm_atomic_helper_commit_planes+0x197/0x4c0
[  146.108699]  drm_atomic_helper_commit_tail_rpm+0x59/0xa0
[  146.108718]  commit_tail+0x103/0x1c0
...
[  146.109302] ---[ end trace d901a1ba1d949036 ]---

Fix the bug by keeping the placement flags. The top-down placement flag
is stored in a separate variable.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Fixes: 7053e0eab473 ("drm/vram-helper: stop using TTM placement flags")
Cc: Christian König <christian.koenig@amd.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200921142536.4392-1-tzimmermann@suse.de

drm/panel: samsung: make vint_table static const

This eliminates the following sparse warning:

drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c:217:15: warning: symbol
'vint_table' was not declared. Should it be static?

While at it, make the table const as it is never modified.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200916132301.2914017-1-yanaijie@huawei.com

drm/imx/dcss: fix unused but set variable warnings

Fix unused but set variable warning building with `make W=1`:

drivers/gpu/drm/imx/dcss/dcss-plane.c:270:6: warning:
 variable ‘pixel_format’ set but not used [-Wunused-but-set-variable]
  u32 pixel_format;
      ^~~~~~~~~~~~

Fixes: 9021c317b770 ("drm/imx: Add initial support for DCSS on iMX8MQ")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Reviewed-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200911014414.4663-1-bobo.shaobowang@huawei.com

drm/vc4: hvs: Pull the state of all the CRTCs prior to PV muxing

The vc4 display engine has a first controller called the HVS that will
perform the composition of the planes. That HVS has 3 FIFOs and can
therefore compose planes for up to three outputs. The timings part is
generated through a component called the Pixel Valve, and the BCM2711 has 6
of them.

Thus, the HVS has some bits to control which FIFO gets output to which
Pixel Valve. The current code supports that muxing by looking at all the
CRTCs in a new DRM atomic state in atomic_check, and given the set of
constraints that we have, assigns FIFOs to CRTCs or reject the mode
entirely. The actual muxing will occur during atomic_commit.

However, that doesn't work if only a fraction of the CRTCs' state is
updated in that state, since it will ignore the CRTCs that are kept running
unmodified, and will thus unassign its associated FIFO, and later disable
it.

In order to make the code work as expected, let's pull the CRTC state of
all the enabled CRTC in our atomic_check so that we can operate on all the
running CRTCs, no matter whether they are affected by the new state or not.

Fixes: 87ebcd42fb7b ("drm/vc4: crtc: Assign output to channel automatically")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200917121623.42023-1-maxime@cerno.tech

drm/ttm: update kernel-doc line comments

Update kernel-doc line comments to fix warnings reported by make W=1.

drivers/gpu/drm/ttm/ttm_memory.c:271: warning: Function parameter or
member 'glob' not described in 'ttm_shrink'
drivers/gpu/drm/ttm/ttm_memory.c:271: warning: Function parameter or
member 'from_wq' not described in 'ttm_shrink'
drivers/gpu/drm/ttm/ttm_memory.c:271: warning: Function parameter or
member 'extra' not described in 'ttm_shrink'
drivers/gpu/drm/ttm/ttm_memory.c:271: warning: Function parameter or
member 'ctx' not described in 'ttm_shrink'

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/391317/
Signed-off-by: Christian König <christian.koenig@amd.com>

drm/panfrost: add Amlogic GPU integration quirks

This adds the required GPU quirks, including the quirk in the PWR
registers at the GPU reset time and the IOMMU quirk for shareability
issues observed on G52 in Amlogic G12B SoCs.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200916150147.25753-4-narmstrong@baylibre.com

drm/panfrost: add amlogic reset quirk callback

The T820, G31 & G52 GPUs integrated by Amlogic in the respective GXM,
G12A/SM1 & G12B SoCs needs a quirk in the PWR registers at the GPU reset
time.

Since the Amlogic's integration of the GPU cores with the SoC is not
publicly documented we do not know what does these values, but they
permit having a fully functional GPU running with Panfrost.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
[Steven: Fix typo in commit log]
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200916150147.25753-3-narmstrong@baylibre.com

drm/panfrost: add support for vendor quirk

The T820, G31 & G52 GPUs integrated by Amlogic in the respective GXM,
G12A/SM1 & G12B SoCs needs a quirk in the PWR registers after each reset.

This adds a callback in the device compatible struct of permit this.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
[Steven: Fix typo in commit log]
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200916150147.25753-2-narmstrong@baylibre.com

drm/dev: Remove drm_dev_init

We can now also delete drm_dev_init, now that vkms, vgem and i915
selftests are resolved.

Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200918132505.2316382-5-daniel.vetter@ffwll.ch

drm/amdgpu: Convert to using devm_drm_dev_alloc() (v2)

Convert to using devm_drm_dev_alloc(),
as drm_dev_init() is going away.

v2: Remove drm_dev_put() since
    a) devres doesn't do refcounting, see
    Documentation/driver-api/driver-model/devres.rst,
    Section 4, paragraph 1; and since
    b) devres acts as garbage collector when
    the DRM device's parent's devres "action" callback
    is called to free the container device (amdgpu_device),
    which embeds the DRM dev.

Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200918132505.2316382-4-daniel.vetter@ffwll.ch

drm/i915/selftests: align more to real device lifetimes

To avoid having to create all the device and driver scaffolding we
just manually create and destroy a devres_group.

v2: Rebased

v3: use devres_open/release_group so we can use devm without real
hacks in the driver core or having to create an entire fake bus for
testing drivers. Might want to extract this into helpers eventually,
maybe as a mock_drm_dev_alloc or test_drm_dev_alloc.

v4:
- Fix IS_ERR handling (Matt)
- Delete surplus put_device() in mock_device_release (intel-gfx-ci)

v5:
- do not switch to device_add - it breaks runtime pm in the tests and
  with the devres_group_add/release no longer needed for automatic
  cleanup (CI). Update commit message to match.
- print correct error in pr_err (Matt)

v6: Remove now unused err variable (CI).

v7: More warning fixes ...

Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> (v3)
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com> (v4)
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200919134032.2488403-1-daniel.vetter@ffwll.ch

drm/i915/selftest: Create mock_destroy_device

Just some prep work before we rework the lifetime handling, which
requires replacing all the drm_dev_put in selftests by something else.

v2: Don't go with a static inline, upsets the header tests and
separation.

Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200918132505.2316382-2-daniel.vetter@ffwll.ch

fbcon: Remove the superfluous break

Remove the superfluous break, as there is a 'return' before it.

Fixes: bad07ff74c32 ("fbcon: smart blitter usage for scrolling")
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200918010521.69950-1-jingxiangfeng@huawei.com

fbdev: aty: remove CONFIG_PM container

The changes made in below mentioned commit removed CONFIG_PM containers
from drivers/video/fbdev/aty/atyfb_base.c but not from
drivers/video/fbdev/aty/atyfb.h for respective callbacks.

This resulted in error for implicit declaration for those callbacks.

Fixes: 348b2956d5e6 ("fbdev: aty: use generic power management")

Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200917115313.725622-1-vaibhavgupta40@gmail.com

drm/ttm: drop evicted from ttm_bo.

This was unused.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200917064132.148521-3-airlied@gmail.com

drm/ttm: drop special pipeline accel cleanup function.

The two accel cleanup paths were mostly the same once refactored.

Just pass a bool to say if the evictions are to be pipelined.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200917064132.148521-2-airlied@gmail.com

drm/ttm: make common function for wait/free node path.

The pipeline and accel cleansups has similiar paths here.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200917043040.146575-8-airlied@gmail.com

drm/ttm: move ghost object creation to a common function

Both accel cleanup and pipeline move had the same code, make
a single function for it.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200917043040.146575-7-airlied@gmail.com

drm/ttm: add a simple assign mem to bo wrapper

This pattern is called in a few places, just clean it up.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200917043040.146575-6-airlied@gmail.com

drm/ttm/drivers: call the bind function directly.

Now the bind functions have all the protection explicitly the
drivers can just call them directly, and the api can be unexported

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200917043040.146575-5-airlied@gmail.com

drm/ttm: move unbind into the tt destroy.

This moves unbind into the driver side on destroy paths.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200917043040.146575-4-airlied@gmail.com

drm/ttm: flip tt destroy ordering.

Call the driver first and have it call the common code cleanup.

This is useful later to fix unbind.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200917043040.146575-3-airlied@gmail.com

drm/ttm: protect against reentrant bind in the drivers

This moves the generic tracking into the drivers and protects
against reentrancy in the drivers. It fixes up radeon and agp
to be able to query the bound status as that is required.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200917043040.146575-2-airlied@gmail.com

drm/ttm: remove superflous extern attribute from funcs

Extern is the default attribute for functions anyway.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/390972/