Linus Torvalds [Mon, 5 Oct 2020 18:54:20 +0000 (11:54 -0700)]
Merge tag 'platform-drivers-x86-v5.9-2' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver fixes from Andy Shevchenko:
"We have some fixes for Tablet Mode reporting in particular, that users
are complaining a lot about.
Summary:
- Attempt #3 of enabling Tablet Mode reporting w/o regressions
- Improve battery recognition code in ASUS WMI driver
- Fix Kconfig dependency warning for Fujitsu and LG laptop drivers
- Add fixes in Thinkpad ACPI driver for _BCL method and NVRAM polling
- Fix power supply extended topology in Mellanox driver
- Fix memory leak in OLPC EC driver
- Avoid static struct device in Intel PMC core driver
- Add support for the touchscreen found in MPMAN Converter9 2-in-1
- Update MAINTAINERS to reflect the real state of affairs"
* tag 'platform-drivers-x86-v5.9-2' of git://git.infradead.org/linux-platform-drivers-x86:
platform/x86: thinkpad_acpi: re-initialize ACPI buffer size when reuse
MAINTAINERS: Add Mark Gross and Hans de Goede as x86 platform drivers maintainers
platform/x86: intel-vbtn: Switch to an allow-list for SW_TABLET_MODE reporting
platform/x86: intel-vbtn: Revert "Fix SW_TABLET_MODE always reporting 1 on the HP Pavilion 11 x360"
platform/x86: intel_pmc_core: do not create a static struct device
platform/x86: mlx-platform: Fix extended topology configuration for power supply units
platform/x86: pcengines-apuv2: Fix typo on define of AMD_FCH_GPIO_REG_GPIO55_DEVSLP0
platform/x86: fix kconfig dependency warning for FUJITSU_LAPTOP
platform/x86: fix kconfig dependency warning for LG_LAPTOP
platform/x86: thinkpad_acpi: initialize tp_nvram_state variable
platform/x86: intel-vbtn: Fix SW_TABLET_MODE always reporting 1 on the HP Pavilion 11 x360
platform/x86: asus-wmi: Add BATC battery name to the list of supported
platform/x86: asus-nb-wmi: Revert "Do not load on Asus T100TA and T200TA"
platform/x86: touchscreen_dmi: Add info for the MPMAN Converter9 2-in-1
Documentation: laptops: thinkpad-acpi: fix underline length build warning
Platform: OLPC: Fix memleak in olpc_ec_probe
Linus Torvalds [Mon, 5 Oct 2020 18:27:14 +0000 (11:27 -0700)]
Merge git://git./linux/kernel/git/netdev/net
Pull networking fixes from David Miller:
1) Make sure SKB control block is in the proper state during IPSEC
ESP-in-TCP encapsulation. From Sabrina Dubroca.
2) Various kinds of attributes were not being cloned properly when we
build new xfrm_state objects from existing ones. Fix from Antony
Antony.
3) Make sure to keep BTF sections, from Tony Ambardar.
4) TX DMA channels need proper locking in lantiq driver, from Hauke
Mehrtens.
5) Honour route MTU during forwarding, always. From Maciej
Żenczykowski.
6) Fix races in kTLS which can result in crashes, from Rohit
Maheshwari.
7) Skip TCP DSACKs with rediculous sequence ranges, from Priyaranjan
Jha.
8) Use correct address family in xfrm state lookups, from Herbert Xu.
9) A bridge FDB flush should not clear out user managed fdb entries
with the ext_learn flag set, from Nikolay Aleksandrov.
10) Fix nested locking of netdev address lists, from Taehee Yoo.
11) Fix handling of 32-bit DATA_FIN values in mptcp, from Mat Martineau.
12) Fix r8169 data corruptions on RTL8402 chips, from Heiner Kallweit.
13) Don't free command entries in mlx5 while comp handler could still be
running, from Eran Ben Elisha.
14) Error flow of request_irq() in mlx5 is busted, due to an off by one
we try to free and IRQ never allocated. From Maor Gottlieb.
15) Fix leak when dumping netlink policies, from Johannes Berg.
16) Sendpage cannot be performed when a page is a slab page, or the page
count is < 1. Some subsystems such as nvme were doing so. Create a
"sendpage_ok()" helper and use it as needed, from Coly Li.
17) Don't leak request socket when using syncookes with mptcp, from
Paolo Abeni.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (111 commits)
net/core: check length before updating Ethertype in skb_mpls_{push,pop}
net: mvneta: fix double free of txq->buf
net_sched: check error pointer in tcf_dump_walker()
net: team: fix memory leak in __team_options_register
net: typhoon: Fix a typo Typoon --> Typhoon
net: hinic: fix DEVLINK build errors
net: stmmac: Modify configuration method of EEE timers
tcp: fix syn cookied MPTCP request socket leak
libceph: use sendpage_ok() in ceph_tcp_sendpage()
scsi: libiscsi: use sendpage_ok() in iscsi_tcp_segment_map()
drbd: code cleanup by using sendpage_ok() to check page for kernel_sendpage()
tcp: use sendpage_ok() to detect misused .sendpage
nvme-tcp: check page by sendpage_ok() before calling kernel_sendpage()
net: add WARN_ONCE in kernel_sendpage() for improper zero-copy send
net: introduce helper sendpage_ok() in include/linux/net.h
net: usb: pegasus: Proper error handing when setting pegasus' MAC address
net: core: document two new elements of struct net_device
netlink: fix policy dump leak
net/mlx5e: Fix race condition on nhe->n pointer in neigh update
net/mlx5e: Fix VLAN create flow
...
Aaron Ma [Fri, 2 Oct 2020 17:09:16 +0000 (01:09 +0800)]
platform/x86: thinkpad_acpi: re-initialize ACPI buffer size when reuse
Evaluating ACPI _BCL could fail, then ACPI buffer size will be set to 0.
When reuse this ACPI buffer, AE_BUFFER_OVERFLOW will be triggered.
Re-initialize buffer size will make ACPI evaluate successfully.
Fixes:
46445b6b896fd ("thinkpad-acpi: fix handle locate for video and query of _BCL")
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Linus Torvalds [Sun, 4 Oct 2020 23:04:34 +0000 (16:04 -0700)]
Linux 5.9-rc8
Guillaume Nault [Fri, 2 Oct 2020 19:53:08 +0000 (21:53 +0200)]
net/core: check length before updating Ethertype in skb_mpls_{push,pop}
Openvswitch allows to drop a packet's Ethernet header, therefore
skb_mpls_push() and skb_mpls_pop() might be called with ethernet=true
and mac_len=0. In that case the pointer passed to skb_mod_eth_type()
doesn't point to an Ethernet header and the new Ethertype is written at
unexpected locations.
Fix this by verifying that mac_len is big enough to contain an Ethernet
header.
Fixes:
fa4e0f8855fc ("net/sched: fix corrupted L2 header with MPLS 'push' and 'pop' actions")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Acked-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Rix [Sat, 3 Oct 2020 18:51:21 +0000 (11:51 -0700)]
net: mvneta: fix double free of txq->buf
clang static analysis reports this problem:
drivers/net/ethernet/marvell/mvneta.c:3465:2: warning:
Attempt to free released memory
kfree(txq->buf);
^~~~~~~~~~~~~~~
When mvneta_txq_sw_init() fails to alloc txq->tso_hdrs,
it frees without poisoning txq->buf. The error is caught
in the mvneta_setup_txqs() caller which handles the error
by cleaning up all of the txqs with a call to
mvneta_txq_sw_deinit which also frees txq->buf.
Since mvneta_txq_sw_deinit is a general cleaner, all of the
partial cleaning in mvneta_txq_sw_deinit()'s error handling
is not needed.
Fixes:
2adb719d74f6 ("net: mvneta: Implement software TSO")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cong Wang [Fri, 2 Oct 2020 19:13:34 +0000 (12:13 -0700)]
net_sched: check error pointer in tcf_dump_walker()
Although we take RTNL on dump path, it is possible to
skip RTNL on insertion path. So the following race condition
is possible:
rtnl_lock() // no rtnl lock
mutex_lock(&idrinfo->lock);
// insert ERR_PTR(-EBUSY)
mutex_unlock(&idrinfo->lock);
tc_dump_action()
rtnl_unlock()
So we have to skip those temporary -EBUSY entries on dump path
too.
Reported-and-tested-by: syzbot+b47bc4f247856fb4d9e1@syzkaller.appspotmail.com
Fixes:
0fedc63fadf0 ("net_sched: commit action insertions together")
Cc: Vlad Buslov <vladbu@mellanox.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Anant Thazhemadam [Sun, 4 Oct 2020 20:55:36 +0000 (02:25 +0530)]
net: team: fix memory leak in __team_options_register
The variable "i" isn't initialized back correctly after the first loop
under the label inst_rollback gets executed.
The value of "i" is assigned to be option_count - 1, and the ensuing
loop (under alloc_rollback) begins by initializing i--.
Thus, the value of i when the loop begins execution will now become
i = option_count - 2.
Thus, when kfree(dst_opts[i]) is called in the second loop in this
order, (i.e., inst_rollback followed by alloc_rollback),
dst_optsp[option_count - 2] is the first element freed, and
dst_opts[option_count - 1] does not get freed, and thus, a memory
leak is caused.
This memory leak can be fixed, by assigning i = option_count (instead of
option_count - 1).
Fixes:
80f7c6683fe0 ("team: add support for per-port options")
Reported-by: syzbot+69b804437cfec30deac3@syzkaller.appspotmail.com
Tested-by: syzbot+69b804437cfec30deac3@syzkaller.appspotmail.com
Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Christophe JAILLET [Fri, 2 Oct 2020 19:47:43 +0000 (21:47 +0200)]
net: typhoon: Fix a typo Typoon --> Typhoon
s/Typoon/Typhoon/
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Randy Dunlap [Thu, 1 Oct 2020 17:54:49 +0000 (10:54 -0700)]
net: hinic: fix DEVLINK build errors
Fix many (lots deleted here) build errors in hinic by selecting NET_DEVLINK.
ld: drivers/net/ethernet/huawei/hinic/hinic_hw_dev.o: in function `mgmt_watchdog_timeout_event_handler':
hinic_hw_dev.c:(.text+0x30a): undefined reference to `devlink_health_report'
ld: drivers/net/ethernet/huawei/hinic/hinic_devlink.o: in function `hinic_fw_reporter_dump':
hinic_devlink.c:(.text+0x1c): undefined reference to `devlink_fmsg_u32_pair_put'
ld: drivers/net/ethernet/huawei/hinic/hinic_devlink.o: in function `hinic_fw_reporter_dump':
hinic_devlink.c:(.text+0x126): undefined reference to `devlink_fmsg_binary_pair_put'
ld: drivers/net/ethernet/huawei/hinic/hinic_devlink.o: in function `hinic_hw_reporter_dump':
hinic_devlink.c:(.text+0x1ba): undefined reference to `devlink_fmsg_string_pair_put'
ld: hinic_devlink.c:(.text+0x227): undefined reference to `devlink_fmsg_u8_pair_put'
ld: drivers/net/ethernet/huawei/hinic/hinic_devlink.o: in function `hinic_devlink_alloc':
hinic_devlink.c:(.text+0xaee): undefined reference to `devlink_alloc'
ld: drivers/net/ethernet/huawei/hinic/hinic_devlink.o: in function `hinic_devlink_free':
hinic_devlink.c:(.text+0xb04): undefined reference to `devlink_free'
ld: drivers/net/ethernet/huawei/hinic/hinic_devlink.o: in function `hinic_devlink_register':
hinic_devlink.c:(.text+0xb26): undefined reference to `devlink_register'
ld: drivers/net/ethernet/huawei/hinic/hinic_devlink.o: in function `hinic_devlink_unregister':
hinic_devlink.c:(.text+0xb46): undefined reference to `devlink_unregister'
ld: drivers/net/ethernet/huawei/hinic/hinic_devlink.o: in function `hinic_health_reporters_create':
hinic_devlink.c:(.text+0xb75): undefined reference to `devlink_health_reporter_create'
ld: hinic_devlink.c:(.text+0xb95): undefined reference to `devlink_health_reporter_create'
ld: hinic_devlink.c:(.text+0xbac): undefined reference to `devlink_health_reporter_destroy'
ld: drivers/net/ethernet/huawei/hinic/hinic_devlink.o: in function `hinic_health_reporters_destroy':
Fixes:
51ba902a16e6 ("net-next/hinic: Initialize hw interface")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Bin Luo <luobin9@huawei.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Aviad Krawczyk <aviad.krawczyk@huawei.com>
Cc: Zhao Chen <zhaochen6@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vineetha G. Jaya Kumaran [Thu, 1 Oct 2020 15:56:09 +0000 (23:56 +0800)]
net: stmmac: Modify configuration method of EEE timers
Ethtool manual stated that the tx-timer is the "the amount of time the
device should stay in idle mode prior to asserting its Tx LPI". The
previous implementation for "ethtool --set-eee tx-timer" sets the LPI TW
timer duration which is not correct. Hence, this patch fixes the
"ethtool --set-eee tx-timer" to configure the EEE LPI timer.
The LPI TW Timer will be using the defined default value instead of
"ethtool --set-eee tx-timer" which follows the EEE LS timer implementation.
Changelog V2
*Not removing/modifying the eee_timer.
*EEE LPI timer can be configured through ethtool and also the eee_timer
module param.
*EEE TW Timer will be configured with default value only, not able to be
configured through ethtool or module param. This follows the implementation
of the EEE LS Timer.
Fixes:
d765955d2ae0 ("stmmac: add the Energy Efficient Ethernet support")
Signed-off-by: Vineetha G. Jaya Kumaran <vineetha.g.jaya.kumaran@intel.com>
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sat, 3 Oct 2020 19:19:23 +0000 (12:19 -0700)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Two bugfixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: VMX: update PFEC_MASK/PFEC_MATCH together with PF intercept
KVM: arm64: Restore missing ISB on nVHE __tlb_switch_to_guest
Linus Torvalds [Sat, 3 Oct 2020 18:57:39 +0000 (11:57 -0700)]
Merge tag 'for-linus-5.9b-rc8-tag' of git://git./linux/kernel/git/xen/tip
Pull xen fix from Juergen Gross:
"Fix a regression introduced in 5.9-rc3 which caused a system running
as fully virtualized guest under Xen to crash when using legacy
devices like a floppy"
* tag 'for-linus-5.9b-rc8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/events: don't use chip_data for legacy IRQs
Linus Torvalds [Sat, 3 Oct 2020 18:47:35 +0000 (11:47 -0700)]
Merge tag 'usb-5.9-rc8' of git://git./linux/kernel/git/gregkh/usb
Pull USB/PHY fixes from Greg KH:
"Here are some small USB and PHY driver fixes for 5.9-rc8
The PHY driver fix resolves an issue found by Dan Carpenter for a
memory leak.
The USB fixes fall into two groups:
- usb gadget fix from Bryan that is a fix for a previous security fix
that showed up in in-the-wild testing
- usb core driver matching bugfixes. This fixes a bug that has
plagued the both the usbip driver and syzbot testing tools this -rc
release cycle. All is now working properly so usbip connections
will work, and syzbot can get back to fuzzing USB drivers properly.
All have been in linux-next for a while with no reported issues"
* tag 'usb-5.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usbcore/driver: Accommodate usbip
usbcore/driver: Fix incorrect downcast
usbcore/driver: Fix specific driver selection
Revert "usbip: Implement a match function to fix usbip"
USB: gadget: f_ncm: Fix NDP16 datagram validation
phy: ti: am654: Fix a leak in serdes_am654_probe()
Linus Torvalds [Sat, 3 Oct 2020 18:40:22 +0000 (11:40 -0700)]
Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Some more driver fixes for i2c"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: npcm7xx: Clear LAST bit after a failed transaction.
i2c: cpm: Fix i2c_ram structure
i2c: i801: Exclude device from suspend direct complete optimization
Linus Torvalds [Sat, 3 Oct 2020 18:37:23 +0000 (11:37 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
"A couple more driver quirks, now enabling newer trackpoints from
Synaptics for real"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: i8042 - add nopnp quirk for Acer Aspire 5 A515
Input: trackpoint - enable Synaptics trackpoints
Eric Biggers [Sat, 3 Oct 2020 05:21:48 +0000 (22:21 -0700)]
scripts/spelling.txt: fix malformed entry
One of the entries has three fields "mistake||correction||correction"
rather than the expected two fields "mistake||correction". Fix it.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20200930234359.255295-1-ebiggers@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joonsoo Kim [Sat, 3 Oct 2020 05:21:45 +0000 (22:21 -0700)]
mm/page_alloc: handle a missing case for memalloc_nocma_{save/restore} APIs
memalloc_nocma_{save/restore} APIs can be used to skip page allocation
on CMA area, but, there is a missing case and the page on CMA area could
be allocated even if APIs are used. This patch handles this case to fix
the potential issue.
For now, these APIs are used to prevent long-term pinning on the CMA
page. When the long-term pinning is requested on the CMA page, it is
migrated to the non-CMA page before pinning. This non-CMA page is
allocated by using memalloc_nocma_{save/restore} APIs. If APIs doesn't
work as intended, the CMA page is allocated and it is pinned for a long
time. This long-term pin for the CMA page causes cma_alloc() failure
and it could result in wrong behaviour on the device driver who uses the
cma_alloc().
Missing case is an allocation from the pcplist. MIGRATE_MOVABLE pcplist
could have the pages on CMA area so we need to skip it if ALLOC_CMA
isn't specified.
Fixes:
8510e69c8efe (mm/page_alloc: fix memalloc_nocma_{save/restore} APIs)
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Link: https://lkml.kernel.org/r/1601429472-12599-1-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Farman [Sat, 3 Oct 2020 05:21:41 +0000 (22:21 -0700)]
mm, slub: restore initial kmem_cache flags
The routine that applies debug flags to the kmem_cache slabs
inadvertantly prevents non-debug flags from being applied to those
same objects. That is, if slub_debug=<flag>,<slab> is specified,
non-debugged slabs will end up having flags of zero, and the slabs
may be unusable.
Fix this by including the input flags for non-matching slabs with the
contents of slub_debug, so that the caches are created as expected
alongside any debugging options that may be requested. With this, we
can remove the check for a NULL slub_debug_string, since it's covered
by the loop itself.
Fixes:
e17f1dfba37b ("mm, slub: extend slub_debug syntax for multiple blocks")
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Kees Cook <keescook@chromium.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Link: https://lkml.kernel.org/r/20200930161931.28575-1-farman@linux.ibm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Paolo Bonzini [Sat, 3 Oct 2020 09:07:59 +0000 (05:07 -0400)]
Merge tag 'kvmarm-fixes-5.9-3' of git://git./linux/kernel/git/kvmarm/kvmarm into kvm-master
KVM/arm64 fixes for 5.9, take #3
- Fix synchronization of VTTBR update on TLB invalidation for nVHE systems
Paolo Bonzini [Tue, 29 Sep 2020 12:31:32 +0000 (08:31 -0400)]
KVM: VMX: update PFEC_MASK/PFEC_MATCH together with PF intercept
The PFEC_MASK and PFEC_MATCH fields in the VMCS reverse the meaning of
the #PF intercept bit in the exception bitmap when they do not match.
This means that, if PFEC_MASK and/or PFEC_MATCH are set, the
hypervisor can get a vmexit for #PF exceptions even when the
corresponding bit is clear in the exception bitmap.
This is unexpected and is promptly detected by a WARN_ON_ONCE.
To fix it, reset PFEC_MASK and PFEC_MATCH when the #PF intercept
is disabled (as is common with enable_ept && !allow_smaller_maxphyaddr).
Reported-by: Qian Cai <cai@redhat.com>>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David S. Miller [Fri, 2 Oct 2020 23:14:21 +0000 (16:14 -0700)]
Merge tag 'mlx5-fixes-2020-09-30' of git://git./linux/kernel/git/saeed/linux
From: Saeed Mahameed <saeedm@nvidia.com>
====================
This series introduces some fixes to mlx5 driver.
v1->v2:
- Patch #1 Don't return while mutex is held. (Dave)
v2->v3:
- Drop patch #1, will consider a better approach (Jakub)
- use cpu_relax() instead of cond_resched() (Jakub)
- while(i--) to reveres a loop (Jakub)
- Drop old mellanox email sign-off and change the committer email
(Jakub)
Please pull and let me know if there is any problem.
For -stable v4.15
('net/mlx5e: Fix VLAN cleanup flow')
('net/mlx5e: Fix VLAN create flow')
For -stable v4.16
('net/mlx5: Fix request_irqs error flow')
For -stable v5.4
('net/mlx5e: Add resiliency in Striding RQ mode for packets larger than MTU')
('net/mlx5: Avoid possible free of command entry while timeout comp handler')
For -stable v5.7
('net/mlx5e: Fix return status when setting unsupported FEC mode')
For -stable v5.8
('net/mlx5e: Fix race condition on nhe->n pointer in neigh update')
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Fri, 2 Oct 2020 10:39:44 +0000 (12:39 +0200)]
tcp: fix syn cookied MPTCP request socket leak
If a syn-cookies request socket don't pass MPTCP-level
validation done in syn_recv_sock(), we need to release
it immediately, or it will be leaked.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/89
Fixes:
9466a1ccebbe ("mptcp: enable JOIN requests even if cookies are in use")
Reported-and-tested-by: Geliang Tang <geliangtang@gmail.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 2 Oct 2020 22:27:08 +0000 (15:27 -0700)]
Merge branch 'Introduce-sendpage_ok-to-detect-misused-sendpage-in-network-related-drivers'
Coly Li says:
====================
Introduce sendpage_ok() to detect misused sendpage in network related drivers
As Sagi Grimberg suggested, the original fix is refind to a more common
inline routine:
static inline bool sendpage_ok(struct page *page)
{
return (!PageSlab(page) && page_count(page) >= 1);
}
If sendpage_ok() returns true, the checking page can be handled by the
concrete zero-copy sendpage method in network layer.
The v10 series has 7 patches, fixes a WARN_ONCE() usage from v9 series,
- The 1st patch in this series introduces sendpage_ok() in header file
include/linux/net.h.
- The 2nd patch adds WARN_ONCE() for improper zero-copy send in
kernel_sendpage().
- The 3rd patch fixes the page checking issue in nvme-over-tcp driver.
- The 4th patch adds page_count check by using sendpage_ok() in
do_tcp_sendpages() as Eric Dumazet suggested.
- The 5th and 6th patches just replace existing open coded checks with
the inline sendpage_ok() routine.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Coly Li [Fri, 2 Oct 2020 08:27:34 +0000 (16:27 +0800)]
libceph: use sendpage_ok() in ceph_tcp_sendpage()
In libceph, ceph_tcp_sendpage() does the following checks before handle
the page by network layer's zero copy sendpage method,
if (page_count(page) >= 1 && !PageSlab(page))
This check is exactly what sendpage_ok() does. This patch replace the
open coded checks by sendpage_ok() as a code cleanup.
Signed-off-by: Coly Li <colyli@suse.de>
Acked-by: Jeff Layton <jlayton@kernel.org>
Cc: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Coly Li [Fri, 2 Oct 2020 08:27:33 +0000 (16:27 +0800)]
scsi: libiscsi: use sendpage_ok() in iscsi_tcp_segment_map()
In iscsci driver, iscsi_tcp_segment_map() uses the following code to
check whether the page should or not be handled by sendpage:
if (!recv && page_count(sg_page(sg)) >= 1 && !PageSlab(sg_page(sg)))
The "page_count(sg_page(sg)) >= 1 && !PageSlab(sg_page(sg)" part is to
make sure the page can be sent to network layer's zero copy path. This
part is exactly what sendpage_ok() does.
This patch uses use sendpage_ok() in iscsi_tcp_segment_map() to replace
the original open coded checks.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Vasily Averin <vvs@virtuozzo.com>
Cc: Cong Wang <amwang@redhat.com>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: Chris Leech <cleech@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Coly Li [Fri, 2 Oct 2020 08:27:32 +0000 (16:27 +0800)]
drbd: code cleanup by using sendpage_ok() to check page for kernel_sendpage()
In _drbd_send_page() a page is checked by following code before sending
it by kernel_sendpage(),
(page_count(page) < 1) || PageSlab(page)
If the check is true, this page won't be send by kernel_sendpage() and
handled by sock_no_sendpage().
This kind of check is exactly what macro sendpage_ok() does, which is
introduced into include/linux/net.h to solve a similar send page issue
in nvme-tcp code.
This patch uses macro sendpage_ok() to replace the open coded checks to
page type and refcount in _drbd_send_page(), as a code cleanup.
Signed-off-by: Coly Li <colyli@suse.de>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
Coly Li [Fri, 2 Oct 2020 08:27:31 +0000 (16:27 +0800)]
tcp: use sendpage_ok() to detect misused .sendpage
commit
a10674bf2406 ("tcp: detecting the misuse of .sendpage for Slab
objects") adds the checks for Slab pages, but the pages don't have
page_count are still missing from the check.
Network layer's sendpage method is not designed to send page_count 0
pages neither, therefore both PageSlab() and page_count() should be
both checked for the sending page. This is exactly what sendpage_ok()
does.
This patch uses sendpage_ok() in do_tcp_sendpages() to detect misused
.sendpage, to make the code more robust.
Fixes:
a10674bf2406 ("tcp: detecting the misuse of .sendpage for Slab objects")
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Coly Li <colyli@suse.de>
Cc: Vasily Averin <vvs@virtuozzo.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: stable@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Coly Li [Fri, 2 Oct 2020 08:27:30 +0000 (16:27 +0800)]
nvme-tcp: check page by sendpage_ok() before calling kernel_sendpage()
Currently nvme_tcp_try_send_data() doesn't use kernel_sendpage() to
send slab pages. But for pages allocated by __get_free_pages() without
__GFP_COMP, which also have refcount as 0, they are still sent by
kernel_sendpage() to remote end, this is problematic.
The new introduced helper sendpage_ok() checks both PageSlab tag and
page_count counter, and returns true if the checking page is OK to be
sent by kernel_sendpage().
This patch fixes the page checking issue of nvme_tcp_try_send_data()
with sendpage_ok(). If sendpage_ok() returns true, send this page by
kernel_sendpage(), otherwise use sock_no_sendpage to handle this page.
Signed-off-by: Coly Li <colyli@suse.de>
Cc: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Jan Kara <jack@suse.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Mikhail Skorzhinskii <mskorzhinskiy@solarflare.com>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Vlastimil Babka <vbabka@suse.com>
Cc: stable@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Coly Li [Fri, 2 Oct 2020 08:27:29 +0000 (16:27 +0800)]
net: add WARN_ONCE in kernel_sendpage() for improper zero-copy send
If a page sent into kernel_sendpage() is a slab page or it doesn't have
ref_count, this page is improper to send by the zero copy sendpage()
method. Otherwise such page might be unexpected released in network code
path and causes impredictable panic due to kernel memory management data
structure corruption.
This path adds a WARN_ON() on the sending page before sends it into the
concrete zero-copy sendpage() method, if the page is improper for the
zero-copy sendpage() method, a warning message can be observed before
the consequential unpredictable kernel panic.
This patch does not change existing kernel_sendpage() behavior for the
improper page zero-copy send, it just provides hint warning message for
following potential panic due the kernel memory heap corruption.
Signed-off-by: Coly Li <colyli@suse.de>
Cc: Cong Wang <amwang@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Coly Li [Fri, 2 Oct 2020 08:27:28 +0000 (16:27 +0800)]
net: introduce helper sendpage_ok() in include/linux/net.h
The original problem was from nvme-over-tcp code, who mistakenly uses
kernel_sendpage() to send pages allocated by __get_free_pages() without
__GFP_COMP flag. Such pages don't have refcount (page_count is 0) on
tail pages, sending them by kernel_sendpage() may trigger a kernel panic
from a corrupted kernel heap, because these pages are incorrectly freed
in network stack as page_count 0 pages.
This patch introduces a helper sendpage_ok(), it returns true if the
checking page,
- is not slab page: PageSlab(page) is false.
- has page refcount: page_count(page) is not zero
All drivers who want to send page to remote end by kernel_sendpage()
may use this helper to check whether the page is OK. If the helper does
not return true, the driver should try other non sendpage method (e.g.
sock_no_sendpage()) to handle the page.
Signed-off-by: Coly Li <colyli@suse.de>
Cc: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Jan Kara <jack@suse.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Mikhail Skorzhinskii <mskorzhinskiy@solarflare.com>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Vlastimil Babka <vbabka@suse.com>
Cc: stable@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Petko Manolov [Fri, 2 Oct 2020 07:56:04 +0000 (10:56 +0300)]
net: usb: pegasus: Proper error handing when setting pegasus' MAC address
v2:
If reading the MAC address from eeprom fail don't throw an error, use randomly
generated MAC instead. Either way the adapter will soldier on and the return
type of set_ethernet_addr() can be reverted to void.
v1:
Fix a bug in set_ethernet_addr() which does not take into account possible
errors (or partial reads) returned by its helpers. This can potentially lead to
writing random data into device's MAC address registers.
Signed-off-by: Petko Manolov <petko.manolov@konsulko.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mauro Carvalho Chehab [Fri, 2 Oct 2020 05:49:45 +0000 (07:49 +0200)]
net: core: document two new elements of struct net_device
As warned by "make htmldocs", there are two new struct elements
that aren't documented:
../include/linux/netdevice.h:2159: warning: Function parameter or member 'unlink_list' not described in 'net_device'
../include/linux/netdevice.h:2159: warning: Function parameter or member 'nested_level' not described in 'net_device'
Fixes:
1fc70edb7d7b ("net: core: add nested_level variable in net_device")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 2 Oct 2020 21:51:34 +0000 (14:51 -0700)]
Merge tag 'pinctrl-v5.9-2' of git://git./linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Some pin control fixes here. All of them are driver fixes, the Intel
Cherryview being the most interesting one.
- Fix a mux problem for I2C in the MVEBU driver.
- Fix a really hairy inversion problem in the Intel Cherryview
driver.
- Fix the register for the sdc2_clk in the Qualcomm SM8250 driver.
- Check the virtual GPIO boot failur in the Mediatek driver"
* tag 'pinctrl-v5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: mediatek: check mtk_is_virt_gpio input parameter
pinctrl: qcom: sm8250: correct sdc2_clk
pinctrl: cherryview: Preserve CHV_PADCTRL1_INVRXTX_TXDATA flag on GPIOs
pinctrl: mvebu: Fix i2c sda definition for 98DX3236
Linus Torvalds [Fri, 2 Oct 2020 21:48:25 +0000 (14:48 -0700)]
Merge tag 'pci-v5.9-fixes-2' of git://git./linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- Fix rockchip regression in rockchip_pcie_valid_device() (Lorenzo
Pieralisi)
- Add Pali Rohár as aardvark PCI maintainer (Pali Rohár)
* tag 'pci-v5.9-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
MAINTAINERS: Add Pali Rohár as aardvark PCI maintainer
PCI: rockchip: Fix bus checks in rockchip_pcie_valid_device()
Linus Torvalds [Fri, 2 Oct 2020 21:42:13 +0000 (14:42 -0700)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two patches in driver frameworks. The iscsi one corrects a bug induced
by a BPF change to network locking and the other is a regression we
introduced"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: iscsi: iscsi_tcp: Avoid holding spinlock while calling getpeername()
scsi: target: Fix lun lookup for TARGET_SCF_LOOKUP_LUN_FROM_TAG case
Linus Torvalds [Fri, 2 Oct 2020 21:38:10 +0000 (14:38 -0700)]
Merge tag 'io_uring-5.9-2020-10-02' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
- fix for async buffered reads if read-ahead is fully disabled (Hao)
- double poll match fix
- ->show_fdinfo() potential ABBA deadlock complaint fix
* tag 'io_uring-5.9-2020-10-02' of git://git.kernel.dk/linux-block:
io_uring: fix async buffered reads when readahead is disabled
io_uring: fix potential ABBA deadlock in ->show_fdinfo()
io_uring: always delete double poll wait entry on match
Linus Torvalds [Fri, 2 Oct 2020 21:34:52 +0000 (14:34 -0700)]
Merge tag 'block-5.9-2020-10-02' of git://git.kernel.dk/linux-block
Pull block fix from Jens Axboe:
"Single fix for a ->commit_rqs failure case"
* tag 'block-5.9-2020-10-02' of git://git.kernel.dk/linux-block:
blk-mq: call commit_rqs while list empty but error happen
Johannes Berg [Fri, 2 Oct 2020 07:46:04 +0000 (09:46 +0200)]
netlink: fix policy dump leak
If userspace doesn't complete the policy dump, we leak the
allocated state. Fix this.
Fixes:
d07dcf9aadd6 ("netlink: add infrastructure to expose policies to userspace")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vlad Buslov [Sun, 20 Sep 2020 16:59:08 +0000 (19:59 +0300)]
net/mlx5e: Fix race condition on nhe->n pointer in neigh update
Current neigh update event handler implementation takes reference to
neighbour structure, assigns it to nhe->n, tries to schedule workqueue task
and releases the reference if task was already enqueued. This results
potentially overwriting existing nhe->n pointer with another neighbour
instance, which causes double release of the instance (once in neigh update
handler that failed to enqueue to workqueue and another one in neigh update
workqueue task that processes updated nhe->n pointer instead of original
one):
[ 3376.512806] ------------[ cut here ]------------
[ 3376.513534] refcount_t: underflow; use-after-free.
[ 3376.521213] Modules linked in: act_skbedit act_mirred act_tunnel_key vxlan ip6_udp_tunnel udp_tunnel nfnetlink act_gact cls_flower sch_ingress openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 mlx5_ib mlx5_core mlxfw pci_hyperv_intf ptp pps_core nfsv3 nfs_acl rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd
grace fscache ib_isert iscsi_target_mod ib_srpt target_core_mod ib_srp rpcrdma rdma_ucm ib_umad ib_ipoib ib_iser rdma_cm ib_cm iw_cm rfkill ib_uverbs ib_core sunrpc kvm_intel kvm iTCO_wdt iTCO_vendor_support virtio_net irqbypass net_failover crc32_pclmul lpc_ich i2c_i801 failover pcspkr i2c_smbus mfd_core ghash_clmulni_intel sch_fq_codel drm i2c
_core ip_tables crc32c_intel serio_raw [last unloaded: mlxfw]
[ 3376.529468] CPU: 8 PID: 22756 Comm: kworker/u20:5 Not tainted 5.9.0-rc5+ #6
[ 3376.530399] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
[ 3376.531975] Workqueue: mlx5e mlx5e_rep_neigh_update [mlx5_core]
[ 3376.532820] RIP: 0010:refcount_warn_saturate+0xd8/0xe0
[ 3376.533589] Code: ff 48 c7 c7 e0 b8 27 82 c6 05 0b b6 09 01 01 e8 94 93 c1 ff 0f 0b c3 48 c7 c7 88 b8 27 82 c6 05 f7 b5 09 01 01 e8 7e 93 c1 ff <0f> 0b c3 0f 1f 44 00 00 8b 07 3d 00 00 00 c0 74 12 83 f8 01 74 13
[ 3376.536017] RSP: 0018:
ffffc90002a97e30 EFLAGS:
00010286
[ 3376.536793] RAX:
0000000000000000 RBX:
ffff8882de30d648 RCX:
0000000000000000
[ 3376.537718] RDX:
ffff8882f5c28f20 RSI:
ffff8882f5c18e40 RDI:
ffff8882f5c18e40
[ 3376.538654] RBP:
ffff8882cdf56c00 R08:
000000000000c580 R09:
0000000000001a4d
[ 3376.539582] R10:
0000000000000731 R11:
ffffc90002a97ccd R12:
0000000000000000
[ 3376.540519] R13:
ffff8882de30d600 R14:
ffff8882de30d640 R15:
ffff88821e000900
[ 3376.541444] FS:
0000000000000000(0000) GS:
ffff8882f5c00000(0000) knlGS:
0000000000000000
[ 3376.542732] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 3376.543545] CR2:
0000556e5504b248 CR3:
00000002c6f10005 CR4:
0000000000770ee0
[ 3376.544483] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 3376.545419] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 3376.546344] PKRU:
55555554
[ 3376.546911] Call Trace:
[ 3376.547479] mlx5e_rep_neigh_update.cold+0x33/0xe2 [mlx5_core]
[ 3376.548299] process_one_work+0x1d8/0x390
[ 3376.548977] worker_thread+0x4d/0x3e0
[ 3376.549631] ? rescuer_thread+0x3e0/0x3e0
[ 3376.550295] kthread+0x118/0x130
[ 3376.550914] ? kthread_create_worker_on_cpu+0x70/0x70
[ 3376.551675] ret_from_fork+0x1f/0x30
[ 3376.552312] ---[ end trace
d84e8f46d2a77eec ]---
Fix the bug by moving work_struct to dedicated dynamically-allocated
structure. This enabled every event handler to work on its own private
neighbour pointer and removes the need for handling the case when task is
already enqueued.
Fixes:
232c001398ae ("net/mlx5e: Add support to neighbour update flow")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Aya Levin [Sun, 13 Sep 2020 15:05:40 +0000 (18:05 +0300)]
net/mlx5e: Fix VLAN create flow
When interface is attached while in promiscuous mode and with VLAN
filtering turned off, both configurations are not respected and VLAN
filtering is performed.
There are 2 flows which add the any-vid rules during interface attach:
VLAN creation table and set rx mode. Each is relaying on the other to
add any-vid rules, eventually non of them does.
Fix this by adding any-vid rules on VLAN creation regardless of
promiscuous mode.
Fixes:
9df30601c843 ("net/mlx5e: Restore vlan filter after seamless reset")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Aya Levin [Sun, 13 Sep 2020 14:57:23 +0000 (17:57 +0300)]
net/mlx5e: Fix VLAN cleanup flow
Prior to this patch unloading an interface in promiscuous mode with RX
VLAN filtering feature turned off - resulted in a warning. This is due
to a wrong condition in the VLAN rules cleanup flow, which left the
any-vid rules in the VLAN steering table. These rules prevented
destroying the flow group and the flow table.
The any-vid rules are removed in 2 flows, but none of them remove it in
case both promiscuous is set and VLAN filtering is off. Fix the issue by
changing the condition of the VLAN table cleanup flow to clean also in
case of promiscuous mode.
mlx5_core 0000:00:08.0: mlx5_destroy_flow_group:2123:(pid 28729): Flow group 20 wasn't destroyed, refcount > 1
mlx5_core 0000:00:08.0: mlx5_destroy_flow_group:2123:(pid 28729): Flow group 19 wasn't destroyed, refcount > 1
mlx5_core 0000:00:08.0: mlx5_destroy_flow_table:2112:(pid 28729): Flow table 262149 wasn't destroyed, refcount > 1
...
...
------------[ cut here ]------------
FW pages counter is 11560 after reclaiming all pages
WARNING: CPU: 1 PID: 28729 at
drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c:660
mlx5_reclaim_startup_pages+0x178/0x230 [mlx5_core]
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Call Trace:
mlx5_function_teardown+0x2f/0x90 [mlx5_core]
mlx5_unload_one+0x71/0x110 [mlx5_core]
remove_one+0x44/0x80 [mlx5_core]
pci_device_remove+0x3e/0xc0
device_release_driver_internal+0xfb/0x1c0
device_release_driver+0x12/0x20
pci_stop_bus_device+0x68/0x90
pci_stop_and_remove_bus_device+0x12/0x20
hv_eject_device_work+0x6f/0x170 [pci_hyperv]
? __schedule+0x349/0x790
process_one_work+0x206/0x400
worker_thread+0x34/0x3f0
? process_one_work+0x400/0x400
kthread+0x126/0x140
? kthread_park+0x90/0x90
ret_from_fork+0x22/0x30
---[ end trace
6283bde8d26170dc ]---
Fixes:
9df30601c843 ("net/mlx5e: Restore vlan filter after seamless reset")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Aya Levin [Wed, 12 Aug 2020 07:44:36 +0000 (10:44 +0300)]
net/mlx5e: Fix return status when setting unsupported FEC mode
Verify the configured FEC mode is supported by at least a single link
mode before applying the command. Otherwise fail the command and return
"Operation not supported".
Prior to this patch, the command was successful, yet it falsely set all
link modes to FEC auto mode - like configuring FEC mode to auto. Auto
mode is the default configuration if a link mode doesn't support the
configured FEC mode.
Fixes:
b5ede32d3329 ("net/mlx5e: Add support for FEC modes based on 50G per lane links")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Aya Levin [Sun, 9 Aug 2020 09:34:21 +0000 (12:34 +0300)]
net/mlx5e: Fix driver's declaration to support GRE offload
Declare GRE offload support with respect to the inner protocol. Add a
list of supported inner protocols on which the driver can offload
checksum and GSO. For other protocols, inform the stack to do the needed
operations. There is no noticeable impact on GRE performance.
Fixes:
2729984149e6 ("net/mlx5e: Support TSO and TX checksum offloads for GRE tunnels")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Maor Dickman [Tue, 1 Sep 2020 09:33:18 +0000 (12:33 +0300)]
net/mlx5e: CT, Fix coverity issue
The cited commit introduced the following coverity issue at function
mlx5_tc_ct_rule_to_tuple_nat:
- Memory - corruptions (OVERRUN)
Overrunning array "tuple->ip.src_v6.in6_u.u6_addr32" of 4 4-byte
elements at element index 7 (byte offset 31) using index
"ip6_offset" (which evaluates to 7).
In case of IPv6 destination address rewrite, ip6_offset values are
between 4 to 7, which will cause memory overrun of array
"tuple->ip.src_v6.in6_u.u6_addr32" to array
"tuple->ip.dst_v6.in6_u.u6_addr32".
Fixed by writing the value directly to array
"tuple->ip.dst_v6.in6_u.u6_addr32" in case ip6_offset values are
between 4 to 7.
Fixes:
bc562be9674b ("net/mlx5e: CT: Save ct entries tuples in hashtables")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Aya Levin [Mon, 20 Jul 2020 13:53:18 +0000 (16:53 +0300)]
net/mlx5e: Add resiliency in Striding RQ mode for packets larger than MTU
Prior to this fix, in Striding RQ mode the driver was vulnerable when
receiving packets in the range (stride size - headroom, stride size].
Where stride size is calculated by mtu+headroom+tailroom aligned to the
closest power of 2.
Usually, this filtering is performed by the HW, except for a few cases:
- Between 2 VFs over the same PF with different MTUs
- On bluefield, when the host physical function sets a larger MTU than
the ARM has configured on its representor and uplink representor.
When the HW filtering is not present, packets that are larger than MTU
might be harmful for the RQ's integrity, in the following impacts:
1) Overflow from one WQE to the next, causing a memory corruption that
in most cases is unharmful: as the write happens to the headroom of next
packet, which will be overwritten by build_skb(). In very rare cases,
high stress/load, this is harmful. When the next WQE is not yet reposted
and points to existing SKB head.
2) Each oversize packet overflows to the headroom of the next WQE. On
the last WQE of the WQ, where addresses wrap-around, the address of the
remainder headroom does not belong to the next WQE, but it is out of the
memory region range. This results in a HW CQE error that moves the RQ
into an error state.
Solution:
Add a page buffer at the end of each WQE to absorb the leak. Actually
the maximal overflow size is headroom but since all memory units must be
of the same size, we use page size to comply with UMR WQEs. The increase
in memory consumption is of a single page per RQ. Initialize the mkey
with all MTTs pointing to a default page. When the channels are
activated, UMR WQEs will redirect the RX WQEs to the actual memory from
the RQ's pool, while the overflow MTTs remain mapped to the default page.
Fixes:
73281b78a37a ("net/mlx5e: Derive Striding RQ size from MTU")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Aya Levin [Mon, 3 Aug 2020 13:22:42 +0000 (16:22 +0300)]
net/mlx5e: Fix error path for RQ alloc
Increase granularity of the error path to avoid unneeded free/release.
Fix the cleanup to be symmetric to the order of creation.
Fixes:
0ddf543226ac ("xdp/mlx5: setup xdp_rxq_info")
Fixes:
422d4c401edd ("net/mlx5e: RX, Split WQ objects for different RQ types")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Maor Gottlieb [Mon, 31 Aug 2020 18:37:31 +0000 (21:37 +0300)]
net/mlx5: Fix request_irqs error flow
Fix error flow handling in request_irqs which try to free irq
that we failed to request.
It fixes the below trace.
WARNING: CPU: 1 PID: 7587 at kernel/irq/manage.c:1684 free_irq+0x4d/0x60
CPU: 1 PID: 7587 Comm: bash Tainted: G W OE 4.15.15-1.el7MELLANOXsmp-x86_64 #1
Hardware name: Advantech SKY-6200/SKY-6200, BIOS F2.00 08/06/2020
RIP: 0010:free_irq+0x4d/0x60
RSP: 0018:
ffffc9000ef47af0 EFLAGS:
00010282
RAX:
ffff88001476ae00 RBX:
0000000000000655 RCX:
0000000000000000
RDX:
ffff88001476ae00 RSI:
ffffc9000ef47ab8 RDI:
ffff8800398bb478
RBP:
ffff88001476a838 R08:
ffff88001476ae00 R09:
000000000000156d
R10:
0000000000000000 R11:
0000000000000004 R12:
ffff88001476a838
R13:
0000000000000006 R14:
ffff88001476a888 R15:
00000000ffffffe4
FS:
00007efeadd32740(0000) GS:
ffff88047fc40000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007fc9cc010008 CR3:
00000001a2380004 CR4:
00000000007606e0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
PKRU:
55555554
Call Trace:
mlx5_irq_table_create+0x38d/0x400 [mlx5_core]
? atomic_notifier_chain_register+0x50/0x60
mlx5_load_one+0x7ee/0x1130 [mlx5_core]
init_one+0x4c9/0x650 [mlx5_core]
pci_device_probe+0xb8/0x120
driver_probe_device+0x2a1/0x470
? driver_allows_async_probing+0x30/0x30
bus_for_each_drv+0x54/0x80
__device_attach+0xa3/0x100
pci_bus_add_device+0x4a/0x90
pci_iov_add_virtfn+0x2dc/0x2f0
pci_enable_sriov+0x32e/0x420
mlx5_core_sriov_configure+0x61/0x1b0 [mlx5_core]
? kstrtoll+0x22/0x70
num_vf_store+0x4b/0x70 [mlx5_core]
kernfs_fop_write+0x102/0x180
__vfs_write+0x26/0x140
? rcu_all_qs+0x5/0x80
? _cond_resched+0x15/0x30
? __sb_start_write+0x41/0x80
vfs_write+0xad/0x1a0
SyS_write+0x42/0x90
do_syscall_64+0x60/0x110
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
Fixes:
24163189da48 ("net/mlx5: Separate IRQ request/free from EQ life cycle")
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Saeed Mahameed [Fri, 11 Sep 2020 18:48:55 +0000 (11:48 -0700)]
net/mlx5: cmdif, Avoid skipping reclaim pages if FW is not accessible
In case of pci is offline reclaim_pages_cmd() will still try to call
the FW to release FW pages, cmd_exec() in this case will return a silent
success without actually calling the FW.
This is wrong and will cause page leaks, what we should do is to detect
pci offline or command interface un-available before tying to access the
FW and manually release the FW pages in the driver.
In this patch we share the code to check for FW command interface
availability and we call it in sensitive places e.g. reclaim_pages_cmd().
Alternative fix:
1. Remove MLX5_CMD_OP_MANAGE_PAGES form mlx5_internal_err_ret_value,
command success simulation list.
2. Always Release FW pages even if cmd_exec fails in reclaim_pages_cmd().
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Eran Ben Elisha [Mon, 31 Aug 2020 12:04:35 +0000 (15:04 +0300)]
net/mlx5: Add retry mechanism to the command entry index allocation
It is possible that new command entry index allocation will temporarily
fail. The new command holds the semaphore, so it means that a free entry
should be ready soon. Add one second retry mechanism before returning an
error.
Patch "net/mlx5: Avoid possible free of command entry while timeout comp
handler" increase the possibility to bump into this temporarily failure
as it delays the entry index release for non-callback commands.
Fixes:
e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Eran Ben Elisha <eranbe@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Eran Ben Elisha [Tue, 21 Jul 2020 07:25:52 +0000 (10:25 +0300)]
net/mlx5: poll cmd EQ in case of command timeout
Once driver detects a command interface command timeout, it warns the
user and returns timeout error to the caller. In such case, the entry of
the command is not evacuated (because only real event interrupt is allowed
to clear command interface entry). If the HW event interrupt
of this entry will never arrive, this entry will be left unused forever.
Command interface entries are limited and eventually we can end up without
the ability to post a new command.
In addition, if driver will not consume the EQE of the lost interrupt and
rearm the EQ, no new interrupts will arrive for other commands.
Add a resiliency mechanism for manually polling the command EQ in case of
a command timeout. In case resiliency mechanism will find non-handled EQE,
it will consume it, and the command interface will be fully functional
again. Once the resiliency flow finished, wait another 5 seconds for the
command interface to complete for this command entry.
Define mlx5_cmd_eq_recover() to manage the cmd EQ polling resiliency flow.
Add an async EQ spinlock to avoid races between resiliency flows and real
interrupts that might run simultaneously.
Fixes:
e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Eran Ben Elisha [Tue, 4 Aug 2020 07:40:21 +0000 (10:40 +0300)]
net/mlx5: Avoid possible free of command entry while timeout comp handler
Upon command completion timeout, driver simulates a forced command
completion. In a rare case where real interrupt for that command arrives
simultaneously, it might release the command entry while the forced
handler might still access it.
Fix that by adding an entry refcount, to track current amount of allowed
handlers. Command entry to be released only when this refcount is
decremented to zero.
Command refcount is always initialized to one. For callback commands,
command completion handler is the symmetric flow to decrement it. For
non-callback commands, it is wait_func().
Before ringing the doorbell, increment the refcount for the real completion
handler. Once the real completion handler is called, it will decrement it.
For callback commands, once the delayed work is scheduled, increment the
refcount. Upon callback command completion handler, we will try to cancel
the timeout callback. In case of success, we need to decrement the callback
refcount as it will never run.
In addition, gather the entry index free and the entry free into a one
flow for all command types release.
Fixes:
e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Eran Ben Elisha [Thu, 13 Aug 2020 13:55:20 +0000 (16:55 +0300)]
net/mlx5: Fix a race when moving command interface to polling mode
As part of driver unload, it destroys the commands EQ (via FW command).
As the commands EQ is destroyed, FW will not generate EQEs for any command
that driver sends afterwards. Driver should poll for later commands status.
Driver commands mode metadata is updated before the commands EQ is
actually destroyed. This can lead for double completion handle by the
driver (polling and interrupt), if a command is executed and completed by
FW after the mode was changed, but before the EQ was destroyed.
Fix that by using the mlx5_cmd_allowed_opcode mechanism to guarantee
that only DESTROY_EQ command can be executed during this time period.
Fixes:
e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Linus Torvalds [Fri, 2 Oct 2020 17:37:08 +0000 (10:37 -0700)]
Merge branch 'work.epoll' of git://git./linux/kernel/git/viro/vfs
Pull epoll fixes from Al Viro:
"Several race fixes in epoll"
* 'work.epoll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ep_create_wakeup_source(): dentry name can change under you...
epoll: EPOLL_CTL_ADD: close the race in decision to take fast path
epoll: replace ->visited/visited_list with generation count
epoll: do not insert into poll queues until all sanity checks are done
Linus Torvalds [Fri, 2 Oct 2020 17:13:05 +0000 (10:13 -0700)]
Merge tag 'riscv-for-linus-5.9-rc8' of git://git./linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
"Two fixes for this week:
- The addition of a symbol export for clint_time_val, which has been
inlined into some timex functions and can be used by drivers.
- A fix to avoid calling get_cycles() before the timers have been
probed.
These both only effect !MMU systems"
* tag 'riscv-for-linus-5.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: Check clint_time_val before use
clocksource: clint: Export clint_time_val for modules
Linus Torvalds [Fri, 2 Oct 2020 17:09:40 +0000 (10:09 -0700)]
Merge tag 'for-5.9-rc7-tag' of git://git./linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Two more fixes.
One is for a lockdep warning/lockup (also caught by syzbot), that one
has been seen in practice. Regarding the other syzbot reports
mentioned last time, they don't seem to be urgent and reliably
reproducible so they'll be fixed later.
The second fix is for a potential corruption when device replace
finishes and the in-memory state of trim is not copied to the new
device"
* tag 'for-5.9-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix filesystem corruption after a device replace
btrfs: move btrfs_rm_dev_replace_free_srcdev outside of all locks
btrfs: move btrfs_scratch_superblocks into btrfs_dev_replace_finishing
Linus Torvalds [Fri, 2 Oct 2020 17:05:56 +0000 (10:05 -0700)]
Merge tag 'pm-5.9-rc8' of git://git./linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix one more issue related to the recent RCU-lockdep changes, a
typo in documentation and add a missing return statement to
intel_pstate.
Specifics:
- Fix up RCU usage for cpuidle on the ARM imx6q platform (Ulf
Hansson)
- Fix typo in the PM documentation (Yoann Congal)
- Add return statement that is missing after recent changes in the
intel_pstate driver (Zhang Rui)"
* tag 'pm-5.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ARM: imx6q: Fixup RCU usage for cpuidle
Documentation: PM: Fix a reStructuredText syntax error
cpufreq: intel_pstate: Fix missing return statement
Linus Torvalds [Fri, 2 Oct 2020 17:01:00 +0000 (10:01 -0700)]
Merge tag 'staging-5.9-rc8' of git://git./linux/kernel/git/gregkh/staging
Pull IIO fixes from Greg KH:
"Here are two small IIO driver fixes for 5.9-rc8 that resolve some
reported issues:
- driver name fixed in one driver
- device name typo fixed
Both have been in linux-next for a while with no reported problems"
* tag 'staging-5.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
iio: adc: qcom-spmi-adc5: fix driver name
iio: adc: ad7124: Fix typo in device name
Linus Torvalds [Fri, 2 Oct 2020 16:51:42 +0000 (09:51 -0700)]
Merge tag 'gpio-v5.9-2' of git://git./linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"Some late GPIO fixes for the v5.9 series:
- Fix compiler warnings on the OMAP when PM is disabled
- Clear the interrupt when setting edge sensitivity on the Spreadtrum
driver.
- Fix up spurious interrupts on the TC35894.
- Support threaded interrupts on the Siox controller.
- Fix resource leaks on the mockup driver.
- Fix line event handling in syscall compatible mode for the
character device.
- Fix an unitialized variable in the PCA953A driver.
- Fix access to all GPIO IRQs on the Aspeed AST2600.
- Fix line direction on the AMD FCH driver.
- Use the bitmap API instead of compiler intrinsics for bit
manipulation in the PCA953x driver"
* tag 'gpio-v5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: pca953x: Correctly initialize registers 6 and 7 for PCA957x
gpio: pca953x: Use bitmap API over implicit GCC extension
gpio: amd-fch: correct logic of GPIO_LINE_DIRECTION
gpio: aspeed: fix ast2600 bank properties
gpio/aspeed-sgpio: don't enable all interrupts by default
gpio/aspeed-sgpio: enable access to all 80 input & output sgpios
gpio: pca953x: Fix uninitialized pending variable
gpiolib: Fix line event handling in syscall compatible mode
gpio: mockup: fix resource leak in error path
gpio: siox: explicitly support only threaded irqs
gpio: tc35894: fix up tc35894 interrupt configuration
gpio: sprd: Clear interrupt when setting the type as edge
gpio: omap: Fix warnings if PM is disabled
Linus Torvalds [Fri, 2 Oct 2020 16:40:09 +0000 (09:40 -0700)]
Merge tag 'mmc-v5.9-rc4-3' of git://git./linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
- Fix deadlock when removing MEMSTICK host
- Workaround broken CMDQ on Intel GLK based IRBIS models
* tag 'mmc-v5.9-rc4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci: Workaround broken command queuing on Intel GLK based IRBIS models
memstick: Skip allocating card when removing host
Thibaut Sautereau [Fri, 2 Oct 2020 15:16:11 +0000 (17:16 +0200)]
random32: Restore __latent_entropy attribute on net_rand_state
Commit
f227e3ec3b5c ("random32: update the net random state on interrupt
and activity") broke compilation and was temporarily fixed by Linus in
83bdc7275e62 ("random32: remove net_rand_state from the latent entropy
gcc plugin") by entirely moving net_rand_state out of the things handled
by the latent_entropy GCC plugin.
From what I understand when reading the plugin code, using the
__latent_entropy attribute on a declaration was the wrong part and
simply keeping the __latent_entropy attribute on the variable definition
was the correct fix.
Fixes:
83bdc7275e62 ("random32: remove net_rand_state from the latent entropy gcc plugin")
Acked-by: Willy Tarreau <w@1wt.eu>
Cc: Emese Revfy <re.emese@gmail.com>
Signed-off-by: Thibaut Sautereau <thibaut.sautereau@ssi.gouv.fr>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rafael J. Wysocki [Fri, 2 Oct 2020 16:30:30 +0000 (18:30 +0200)]
Merge branch 'pm-cpufreq'
* pm-cpufreq:
cpufreq: intel_pstate: Fix missing return statement
Roman Gushchin [Thu, 1 Oct 2020 20:07:49 +0000 (13:07 -0700)]
mm: memcg/slab: fix slab statistics in !SMP configuration
Since commit
ea426c2a7de8 ("mm: memcg: prepare for byte-sized vmstat
items") the write side of slab counters accepts a value in bytes and
converts it to pages. It happens in __mod_node_page_state().
However a non-SMP version of __mod_node_page_state() doesn't perform
this conversion. It leads to incorrect (unrealistically high) slab
counters values. Fix this by adding a similar conversion to the non-SMP
version of __mod_node_page_state().
Signed-off-by: Roman Gushchin <guro@fb.com>
Reported-and-tested-by: Bastian Bittorf <bb@npl.de>
Fixes:
ea426c2a7de8 ("mm: memcg: prepare for byte-sized vmstat items")
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hans de Goede [Fri, 25 Sep 2020 06:58:12 +0000 (08:58 +0200)]
MAINTAINERS: Add Mark Gross and Hans de Goede as x86 platform drivers maintainers
Darren Hart and Andy Shevchenko lately have not had enough time to
maintain the x86 platform drivers, dropping their status to:
"Odd Fixes".
Mark Gross and Hans de Goede will take over maintainership of
the x86 platform drivers. Replace Darren and Andy's entries with
theirs and change the status to "Maintained".
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Mark Gross <mgross@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Hans de Goede [Wed, 30 Sep 2020 13:19:05 +0000 (15:19 +0200)]
platform/x86: intel-vbtn: Switch to an allow-list for SW_TABLET_MODE reporting
2 recent commits:
cfae58ed681c ("platform/x86: intel-vbtn: Only blacklist SW_TABLET_MODE
on the 9 / "Laptop" chasis-type")
1fac39fd0316 ("platform/x86: intel-vbtn: Also handle tablet-mode switch on
"Detachable" and "Portable" chassis-types")
Enabled reporting of SW_TABLET_MODE on more devices since the vbtn ACPI
interface is used by the firmware on some of those devices to report this.
Testing has shown that unconditionally enabling SW_TABLET_MODE reporting
on all devices with a chassis type of 8 ("Portable") or 10 ("Notebook")
which support the VGBS method is a very bad idea.
Many of these devices are normal laptops (non 2-in-1) models with a VGBS
which always returns 0, which we translate to SW_TABLET_MODE=1. This in
turn causes userspace (libinput) to suppress events from the builtin
keyboard and touchpad, making the laptop essentially unusable.
Since the problem of wrongly reporting SW_TABLET_MODE=1 in combination
with libinput, leads to a non-usable system. Where as OTOH many people will
not even notice when SW_TABLET_MODE is not being reported, this commit
changes intel_vbtn_has_switches() to use a DMI based allow-list.
The new DMI based allow-list matches on the 31 ("Convertible") and
32 ("Detachable") chassis-types, as these clearly are 2-in-1s and
so far if they support the intel-vbtn ACPI interface they all have
properly working SW_TABLET_MODE reporting.
Besides these 2 generic matches, it also contains model specific matches
for 2-in-1 models which use a different chassis-type and which are known
to have properly working SW_TABLET_MODE reporting.
This has been tested on the following 2-in-1 devices:
Dell Venue 11 Pro 7130 vPro
HP Pavilion X2 10-p002nd
HP Stream x360 Convertible PC 11
Medion E1239T
Fixes:
cfae58ed681c ("platform/x86: intel-vbtn: Only blacklist SW_TABLET_MODE on the 9 / "Laptop" chasis-type")
BugLink: https://forum.manjaro.org/t/keyboard-and-touchpad-only-work-on-kernel-5-6/22668
BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=1175599
Cc: Barnabás Pőcze <pobrn@protonmail.com>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Andy Shevchenko [Fri, 2 Oct 2020 14:29:59 +0000 (17:29 +0300)]
platform/x86: intel-vbtn: Revert "Fix SW_TABLET_MODE always reporting 1 on the HP Pavilion 11 x360"
After discussion, see the Link tag, it appears that this is not good enough.
So, revert it now and apply a better fix.
This reverts commit
d823346876a970522ff9e4d2b323c9b734dcc4de.
Link: https://lore.kernel.org/platform-driver-x86/s5hft71klxl.wl-tiwai@suse.de/
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Linus Torvalds [Fri, 2 Oct 2020 02:14:36 +0000 (19:14 -0700)]
pipe: remove pipe_wait() and fix wakeup race with splice
The pipe splice code still used the old model of waiting for pipe IO by
using a non-specific "pipe_wait()" that waited for any pipe event to
happen, which depended on all pipe IO being entirely serialized by the
pipe lock. So by checking the state you were waiting for, and then
adding yourself to the wait queue before dropping the lock, you were
guaranteed to see all the wakeups.
Strictly speaking, the actual wakeups were not done under the lock, but
the pipe_wait() model still worked, because since the waiter held the
lock when checking whether it should sleep, it would always see the
current state, and the wakeup was always done after updating the state.
However, commit
0ddad21d3e99 ("pipe: use exclusive waits when reading or
writing") split the single wait-queue into two, and in the process also
made the "wait for event" code wait for _two_ wait queues, and that then
showed a race with the wakers that were not serialized by the pipe lock.
It's only splice that used that "pipe_wait()" model, so the problem
wasn't obvious, but Josef Bacik reports:
"I hit a hang with fstest btrfs/187, which does a btrfs send into
/dev/null. This works by creating a pipe, the write side is given to
the kernel to write into, and the read side is handed to a thread that
splices into a file, in this case /dev/null.
The box that was hung had the write side stuck here [pipe_write] and
the read side stuck here [splice_from_pipe_next -> pipe_wait].
[ more details about pipe_wait() scenario ]
The problem is we're doing the prepare_to_wait, which sets our state
each time, however we can be woken up either with reads or writes. In
the case above we race with the WRITER waking us up, and re-set our
state to INTERRUPTIBLE, and thus never break out of schedule"
Josef had a patch that avoided the issue in pipe_wait() by just making
it set the state only once, but the deeper problem is that pipe_wait()
depends on a level of synchonization by the pipe mutex that it really
shouldn't. And the whole "wait for any pipe state change" model really
isn't very good to begin with.
So rather than trying to work around things in pipe_wait(), remove that
legacy model of "wait for arbitrary pipe event" entirely, and actually
create functions that wait for the pipe actually being readable or
writable, and can do so without depending on the pipe lock serializing
everything.
Fixes:
0ddad21d3e99 ("pipe: use exclusive waits when reading or writing")
Link: https://lore.kernel.org/linux-fsdevel/bfa88b5ad6f069b2b679316b9e495a970130416c.1601567868.git.josef@toxicpanda.com/
Reported-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-and-tested-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 1 Oct 2020 19:59:36 +0000 (12:59 -0700)]
Merge tag 'iommu-fixes-v5.9-rc7' of git://git./linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Fix a device reference counting bug in the Exynos IOMMU driver.
- Lockdep fix for the Intel VT-d driver.
- Fix a bug in the AMD IOMMU driver which caused corruption of the IVRS
ACPI table and caused IOMMU driver initialization failures in kdump
kernels.
* tag 'iommu-fixes-v5.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Fix lockdep splat in iommu_flush_dev_iotlb()
iommu/amd: Fix the overwritten field in IVMD header
iommu/exynos: add missing put_device() call in exynos_iommu_of_xlate()
Heiner Kallweit [Thu, 1 Oct 2020 07:23:02 +0000 (09:23 +0200)]
r8169: fix data corruption issue on RTL8402
Petr reported that after resume from suspend RTL8402 partially
truncates incoming packets, and re-initializing register RxConfig
before the actual chip re-initialization sequence is needed to avoid
the issue.
Reported-by: Petr Tesarik <ptesarik@suse.cz>
Proposed-by: Petr Tesarik <ptesarik@suse.cz>
Tested-by: Petr Tesarik <ptesarik@suse.cz>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Thu, 1 Oct 2020 06:44:19 +0000 (08:44 +0200)]
r8169: fix handling ether_clk
Petr reported that system freezes on r8169 driver load on a system
using ether_clk. The original change was done under the assumption
that the clock isn't needed for basic operations like chip register
access. But obviously that was wrong.
Therefore effectively revert the original change, and in addition
leave the clock active when suspending and WoL is enabled. Chip may
not be able to process incoming packets otherwise.
Fixes:
9f0b54cd1672 ("r8169: move switching optional clock on/off to pll power functions")
Reported-by: Petr Tesarik <ptesarik@suse.cz>
Tested-by: Petr Tesarik <ptesarik@suse.cz>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Thu, 1 Oct 2020 18:49:01 +0000 (11:49 -0700)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fix from Catalin Marinas:
"A previous commit to prevent AML memory opregions from accessing the
kernel memory turned out to be too restrictive. Relax the permission
check to permit the ACPI core to map kernel memory used for table
overrides"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: permit ACPI core to map kernel memory used for table overrides
Linus Torvalds [Thu, 1 Oct 2020 16:45:37 +0000 (09:45 -0700)]
Merge tag 'drm-fixes-2020-10-01-1' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"AMD and vmwgfx fixes.
Just dequeuing these a bit early as the AMD ones are bit larger than
I'd prefer, but Alex missed last week so it's a double set of fixes.
The larger ones are just register header fixes for the new chips that
were just introduced in rc1 along with some new PCI IDs for new hw.
Otherwise it is usual fixes.
The vmwgfx fix was due to some testing I was doing and found we
weren't booting properly, vmware had the fix internally so hurried it
vmwgfx:
- fix a regression due to TTM refactor
amdgpu:
- Fix potential double free in userptr handling
- Sienna Cichlid and Navy Flounder udpates
- Add Sienna Cichlid PCI IDs
- Drop experimental flag for navi12
- Raven fixes
- Renoir fixes
- HDCP fix
- DCN3 fix for clang and older versions of gcc
- Fix a runtime pm refcount issue"
* tag 'drm-fixes-2020-10-01-1' of git://anongit.freedesktop.org/drm/drm:
drm/amdgpu: disable gfxoff temporarily for navy_flounder
drm/amd/pm: setup APU dpm clock table in SMU HW initialization
drm/vmwgfx: Fix error handling in get_node
drm/amd/display: remove duplicate call to rn_vbios_smu_get_smu_version()
drm/amdgpu/swsmu/smu12: fix force clock handling for mclk
drm/amdgpu: restore proper ref count in amdgpu_display_crtc_set_config
drm/amdgpu/display: fix CFLAGS setup for DCN30
drm/amd/display: fix return value check for hdcp_work
drm/amdgpu: remove gpu_info fw support for sienna_cichlid etc.
drm/amd/pm: Removed fixed clock in auto mode DPM
drm/amdgpu: remove experimental flag from navi12
drm/amdgpu: add device ID for sienna_cichlid (v2)
drm/amdgpu: use the AV1 defines for VCN 3.0
drm/amdgpu: add VCN 3.0 AV1 registers
drm/amdgpu: add the GC 10.3 VRS registers
drm/amdgpu: prevent double kfree ttm->sg
Linus Torvalds [Thu, 1 Oct 2020 16:41:02 +0000 (09:41 -0700)]
Merge tag 'trace-v5.9-rc6' of git://git./linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Two tracing fixes:
- Fix temp buffer accounting that caused a WARNING for
ftrace_dump_on_opps()
- Move the recursion check in one of the function callback helpers to
the beginning of the function, as if the rcu_is_watching() gets
traced, it will cause a recursive loop that will crash the kernel"
* tag 'trace-v5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Move RCU is watching check after recursion check
tracing: Fix trace_find_next_entry() accounting of temp buffer size
Lu Baolu [Sun, 27 Sep 2020 06:24:28 +0000 (14:24 +0800)]
iommu/vt-d: Fix lockdep splat in iommu_flush_dev_iotlb()
Lock(&iommu->lock) without disabling irq causes lockdep warnings.
[ 12.703950] ========================================================
[ 12.703962] WARNING: possible irq lock inversion dependency detected
[ 12.703975] 5.9.0-rc6+ #659 Not tainted
[ 12.703983] --------------------------------------------------------
[ 12.703995] systemd-udevd/284 just changed the state of lock:
[ 12.704007]
ffffffffbd6ff4d8 (device_domain_lock){..-.}-{2:2}, at:
iommu_flush_dev_iotlb.part.57+0x2e/0x90
[ 12.704031] but this lock took another, SOFTIRQ-unsafe lock in the past:
[ 12.704043] (&iommu->lock){+.+.}-{2:2}
[ 12.704045]
and interrupts could create inverse lock ordering between
them.
[ 12.704073]
other info that might help us debug this:
[ 12.704085] Possible interrupt unsafe locking scenario:
[ 12.704097] CPU0 CPU1
[ 12.704106] ---- ----
[ 12.704115] lock(&iommu->lock);
[ 12.704123] local_irq_disable();
[ 12.704134] lock(device_domain_lock);
[ 12.704146] lock(&iommu->lock);
[ 12.704158] <Interrupt>
[ 12.704164] lock(device_domain_lock);
[ 12.704174]
*** DEADLOCK ***
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200927062428.13713-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Juergen Gross [Wed, 30 Sep 2020 09:16:14 +0000 (11:16 +0200)]
xen/events: don't use chip_data for legacy IRQs
Since commit
c330fb1ddc0a ("XEN uses irqdesc::irq_data_common::handler_data to store a per interrupt XEN data pointer which contains XEN specific information.")
Xen is using the chip_data pointer for storing IRQ specific data. When
running as a HVM domain this can result in problems for legacy IRQs, as
those might use chip_data for their own purposes.
Use a local array for this purpose in case of legacy IRQs, avoiding the
double use.
Cc: stable@vger.kernel.org
Fixes:
c330fb1ddc0a ("XEN uses irqdesc::irq_data_common::handler_data to store a per interrupt XEN data pointer which contains XEN specific information.")
Signed-off-by: Juergen Gross <jgross@suse.com>
Tested-by: Stefan Bader <stefan.bader@canonical.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20200930091614.13660-1-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Adrian Huang [Sat, 26 Sep 2020 10:26:02 +0000 (18:26 +0800)]
iommu/amd: Fix the overwritten field in IVMD header
Commit
387caf0b759a ("iommu/amd: Treat per-device exclusion
ranges as r/w unity-mapped regions") accidentally overwrites
the 'flags' field in IVMD (struct ivmd_header) when the I/O
virtualization memory definition is associated with the
exclusion range entry. This leads to the corrupted IVMD table
(incorrect checksum). The kdump kernel reports the invalid checksum:
ACPI BIOS Warning (bug): Incorrect checksum in table [IVRS] - 0x5C, should be 0x60 (
20200717/tbprint-177)
AMD-Vi: [Firmware Bug]: IVRS invalid checksum
Fix the above-mentioned issue by modifying the 'struct unity_map_entry'
member instead of the IVMD header.
Cleanup: The *exclusion_range* functions are not used anymore, so
get rid of them.
Fixes:
387caf0b759a ("iommu/amd: Treat per-device exclusion ranges as r/w unity-mapped regions")
Reported-and-tested-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Adrian Huang <ahuang12@lenovo.com>
Cc: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20200926102602.19177-1-adrianhuang0701@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Marc Zyngier [Mon, 13 Jul 2020 14:15:14 +0000 (15:15 +0100)]
KVM: arm64: Restore missing ISB on nVHE __tlb_switch_to_guest
Commit
a0e50aa3f4a8 ("KVM: arm64: Factor out stage 2 page table
data from struct kvm") dropped the ISB after __load_guest_stage2(),
only leaving the one that is required when the speculative AT
workaround is in effect.
As Andrew points it: "This alternative is 'backwards' to avoid a
double ISB as there is one in __load_guest_stage2 when the workaround
is active."
Restore the missing ISB, conditionned on the AT workaround not being
active.
Fixes:
a0e50aa3f4a8 ("KVM: arm64: Factor out stage 2 page table data from struct kvm")
Reported-by: Andrew Scull <ascull@google.com>
Reported-by: Thomas Tai <thomas.tai@oracle.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Andy Shevchenko [Wed, 30 Sep 2020 14:20:13 +0000 (17:20 +0300)]
gpio: pca953x: Correctly initialize registers 6 and 7 for PCA957x
When driver has been converted to the bitmap API the non-bitmap functions
started behaving differently on 32-bit BE architectures since the bytes in
two consequent unsigned longs are in different order in comparison to byte
array. Hence if the chip had had more than 32 lines the memset() call over
it would have not set up upper lines correctly.
Although it's currently a theoretical case (no supported chips of this type
has 32+ lines), it's better to provide a clean code to avoid people thinking
this is okay and potentially producing not fully working things.
Fixes:
35d13d94893f ("gpio: pca953x: convert to use bitmap API")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Link: https://lore.kernel.org/r/20200930142013.59247-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Andy Shevchenko [Wed, 30 Sep 2020 14:20:12 +0000 (17:20 +0300)]
gpio: pca953x: Use bitmap API over implicit GCC extension
In IRQ handler we have to clear bitmap before use. Currently
the GCC extension has been used for that. For sake of the consistency
switch to bitmap API. As expected bloat-o-meter shows no difference
in the object size.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Link: https://lore.kernel.org/r/20200930142013.59247-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Hanks Chen [Thu, 20 Aug 2020 11:22:25 +0000 (19:22 +0800)]
pinctrl: mediatek: check mtk_is_virt_gpio input parameter
check mtk_is_virt_gpio input parameter,
virtual gpio need to support eint mode.
add error handler for the ko case
to fix this boot fail:
pc : mtk_is_virt_gpio+0x20/0x38 [pinctrl_mtk_common_v2]
lr : mtk_gpio_get_direction+0x44/0xb0 [pinctrl_paris]
Fixes:
edd546465002 ("pinctrl: mediatek: avoid virtual gpio trying to set reg")
Signed-off-by: Hanks Chen <hanks.chen@mediatek.com>
Acked-by: Sean Wang <sean.wang@kernel.org>
Singed-off-by: Jie Yang <sin_jieyang@mediatek.com>
Link: https://lore.kernel.org/r/1597922546-29633-1-git-send-email-hanks.chen@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Dmitry Baryshkov [Mon, 14 Sep 2020 09:18:46 +0000 (12:18 +0300)]
pinctrl: qcom: sm8250: correct sdc2_clk
Correct sdc2_clk pin definition (register offset is wrong, verified by
the msm-4.19 driver).
Fixes:
4e3ec9e407ad ("pinctrl: qcom: Add sm8250 pinctrl driver.")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20200914091846.55204-1-dmitry.baryshkov@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Dave Airlie [Thu, 1 Oct 2020 05:25:32 +0000 (15:25 +1000)]
Merge tag 'amd-drm-fixes-5.9-2020-09-30' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
amd-drm-fixes-5.9-2020-09-30:
amdgpu:
- Fix potential double free in userptr handling
- Sienna Cichlid and Navy Flounder udpates
- Add Sienna Cichlid PCI IDs
- Drop experimental flag for navi12
- Raven fixes
- Renoir fixes
- HDCP fix
- DCN3 fix for clang and older versions of gcc
- Fix a runtime pm refcount issue
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200930161326.4243-1-alexander.deucher@amd.com
David S. Miller [Wed, 30 Sep 2020 22:07:19 +0000 (15:07 -0700)]
Merge branch 'Fix-bugs-in-Octeontx2-netdev-driver'
Geetha sowjanya says:
====================
Fix bugs in Octeontx2 netdev driver
In existing Octeontx2 network drivers code has issues
like stale entries in broadcast replication list, missing
L3TYPE for IPv6 frames, running tx queues on error and
race condition in mbox reset.
This patch set fixes the above issues.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Hariprasad Kelam [Wed, 30 Sep 2020 16:09:35 +0000 (21:39 +0530)]
octeontx2-pf: Fix synchnorization issue in mbox
Mbox implementation in octeontx2 driver has three states
alloc, send and reset in mbox response. VF allocate and
sends message to PF for processing, PF ACKs them back and
reset the mbox memory. In some case we see synchronization
issue where after msgs_acked is incremented and before
mbox_reset API is called, if current execution is scheduled
out and a different thread is scheduled in which checks for
msgs_acked. Since the new thread sees msgs_acked == msgs_sent
it will try to allocate a new message and to send a new mbox
message to PF.Now if mbox_reset is scheduled in, PF will see
'0' in msgs_send.
This patch fixes the issue by calling mbox_reset before
incrementing msgs_acked flag for last processing message and
checks for valid message size.
Fixes:
d424b6c02 ("octeontx2-pf: Enable SRIOV and added VF mbox handling")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hariprasad Kelam [Wed, 30 Sep 2020 16:09:14 +0000 (21:39 +0530)]
octeontx2-pf: Fix the device state on error
Currently in otx2_open on failure of nix_lf_start
transmit queues are not stopped which are already
started in link_event. Since the tx queues are not
stopped network stack still try's to send the packets
leading to driver crash while access the device resources.
Fixes:
50fe6c02e ("octeontx2-pf: Register and handle link notifications")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geetha sowjanya [Wed, 30 Sep 2020 16:08:52 +0000 (21:38 +0530)]
octeontx2-pf: Fix TCP/UDP checksum offload for IPv6 frames
For TCP/UDP checksum offload feature in Octeontx2
expects L3TYPE to be set irrespective of IP header
checksum is being offloaded or not. Currently for
IPv6 frames L3TYPE is not being set resulting in
packet drop with checksum error. This patch fixes
this issue.
Fixes:
3ca6c4c88 ("octeontx2-pf: Add packet transmission support")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Subbaraya Sundeep [Wed, 30 Sep 2020 16:08:27 +0000 (21:38 +0530)]
octeontx2-af: Fix enable/disable of default NPC entries
Packet replication feature present in Octeontx2
is a hardware linked list of PF and its VF
interfaces so that broadcast packets are sent
to all interfaces present in the list. It is
driver job to add and delete a PF/VF interface
to/from the list when the interface is brought
up and down. This patch fixes the
npc_enadis_default_entries function to handle
broadcast replication properly if packet replication
feature is present.
Fixes:
40df309e4166 ("octeontx2-af: Support to enable/disable default MCAM entries")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 30 Sep 2020 22:01:09 +0000 (15:01 -0700)]
Merge branch '100GbE' of https://github.com/anguy11/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2020-09-30
This series contains updates to ice driver only.
Jake increases the wait time for firmware response as it can take longer
than the current wait time. Preserves the NVM capabilities of the device in
safe mode so the device reports its NVM update capabilities properly
when in this state.
v2: Added cover letter
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pali Rohár [Fri, 25 Sep 2020 09:21:15 +0000 (11:21 +0200)]
MAINTAINERS: Add Pali Rohár as aardvark PCI maintainer
Link: https://lore.kernel.org/r/20200925092115.16546-1-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Thomas Petazzzoni <thomas.petazzoni@bootlin.com>
Ard Biesheuvel [Tue, 29 Sep 2020 13:25:22 +0000 (15:25 +0200)]
arm64: permit ACPI core to map kernel memory used for table overrides
Jonathan reports that the strict policy for memory mapped by the
ACPI core breaks the use case of passing ACPI table overrides via
initramfs. This is due to the fact that the memory type used for
loading the initramfs in memory is not recognized as a memory type
that is typically used by firmware to pass firmware tables.
Since the purpose of the strict policy is to ensure that no AML or
other ACPI code can manipulate any memory that is used by the kernel
to keep its internal state or the state of user tasks, we can relax
the permission check, and allow mappings of memory that is reserved
and marked as NOMAP via memblock, and therefore not covered by the
linear mapping to begin with.
Fixes:
1583052d111f ("arm64/acpi: disallow AML memory opregions to access kernel memory")
Fixes:
325f5585ec36 ("arm64/acpi: disallow writeable AML opregion mapping for EFI code regions")
Reported-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Link: https://lore.kernel.org/r/20200929132522.18067-1-ardb@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Linus Torvalds [Wed, 30 Sep 2020 21:18:38 +0000 (14:18 -0700)]
Merge tag 'clk-fixes-for-linus' of git://git./linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Another batch of clk driver fixes:
- Make sure DRAM and ChipID region doesn't get disabled on Exynos
- Fix a SATA failure on Tegra
- Fix the emac_ptp clk divider on stratix10"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: socfpga: stratix10: fix the divider for the emac_ptp_free_clk
clk: samsung: exynos4: mark 'chipid' clock as CLK_IGNORE_UNUSED
clk: tegra: Fix missing prototype for tegra210_clk_register_emc()
clk: tegra: Always program PLL_E when enabled
clk: tegra: Capitalization fixes
clk: samsung: Keep top BPLL mux on Exynos542x enabled
Anup Patel [Sun, 27 Sep 2020 05:39:16 +0000 (11:09 +0530)]
RISC-V: Check clint_time_val before use
The NoMMU kernel is broken for QEMU virt machine from Linux-5.9-rc6
because clint_time_val is used even before CLINT driver is probed
at following places:
1. rand_initialize() calls get_cycles() which in-turn uses
clint_time_val
2. boot_init_stack_canary() calls get_cycles() which in-turn
uses clint_time_val
The issue#1 (above) is fixed by providing custom random_get_entropy()
for RISC-V NoMMU kernel. For issue#2 (above), we remove dependency of
boot_init_stack_canary() on get_cycles() and this is aligned with the
boot_init_stack_canary() implementations of ARM, ARM64 and MIPS kernel.
Fixes:
d5be89a8d118 ("RISC-V: Resurrect the MMIO timer implementation for M-mode systems")
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Tested-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Filipe Manana [Wed, 23 Sep 2020 14:30:16 +0000 (15:30 +0100)]
btrfs: fix filesystem corruption after a device replace
We use a device's allocation state tree to track ranges in a device used
for allocated chunks, and we set ranges in this tree when allocating a new
chunk. However after a device replace operation, we were not setting the
allocated ranges in the new device's allocation state tree, so that tree
is empty after a device replace.
This means that a fitrim operation after a device replace will trim the
device ranges that have allocated chunks and extents, as we trim every
range for which there is not a range marked in the device's allocation
state tree. It is also important during chunk allocation, since the
device's allocation state is used to determine if a range is already
allocated when allocating a new chunk.
This is trivial to reproduce and the following script triggers the bug:
$ cat reproducer.sh
#!/bin/bash
DEV1="/dev/sdg"
DEV2="/dev/sdh"
DEV3="/dev/sdi"
wipefs -a $DEV1 $DEV2 $DEV3 &> /dev/null
# Create a raid1 test fs on 2 devices.
mkfs.btrfs -f -m raid1 -d raid1 $DEV1 $DEV2 > /dev/null
mount $DEV1 /mnt/btrfs
xfs_io -f -c "pwrite -S 0xab 0 10M" /mnt/btrfs/foo
echo "Starting to replace $DEV1 with $DEV3"
btrfs replace start -B $DEV1 $DEV3 /mnt/btrfs
echo
echo "Running fstrim"
fstrim /mnt/btrfs
echo
echo "Unmounting filesystem"
umount /mnt/btrfs
echo "Mounting filesystem in degraded mode using $DEV3 only"
wipefs -a $DEV1 $DEV2 &> /dev/null
mount -o degraded $DEV3 /mnt/btrfs
if [ $? -ne 0 ]; then
dmesg | tail
echo
echo "Failed to mount in degraded mode"
exit 1
fi
echo
echo "File foo data (expected all bytes = 0xab):"
od -A d -t x1 /mnt/btrfs/foo
umount /mnt/btrfs
When running the reproducer:
$ ./replace-test.sh
wrote
10485760/
10485760 bytes at offset 0
10 MiB, 2560 ops; 0.0901 sec (110.877 MiB/sec and 28384.5216 ops/sec)
Starting to replace /dev/sdg with /dev/sdi
Running fstrim
Unmounting filesystem
Mounting filesystem in degraded mode using /dev/sdi only
mount: /mnt/btrfs: wrong fs type, bad option, bad superblock on /dev/sdi, missing codepage or helper program, or other error.
[19581.748641] BTRFS info (device sdg): dev_replace from /dev/sdg (devid 1) to /dev/sdi started
[19581.803842] BTRFS info (device sdg): dev_replace from /dev/sdg (devid 1) to /dev/sdi finished
[19582.208293] BTRFS info (device sdi): allowing degraded mounts
[19582.208298] BTRFS info (device sdi): disk space caching is enabled
[19582.208301] BTRFS info (device sdi): has skinny extents
[19582.212853] BTRFS warning (device sdi): devid 2 uuid
1f731f47-e1bb-4f00-bfbb-
9e5a0cb4ba9f is missing
[19582.213904] btree_readpage_end_io_hook: 25839 callbacks suppressed
[19582.213907] BTRFS error (device sdi): bad tree block start, want
30490624 have 0
[19582.214780] BTRFS warning (device sdi): failed to read root (objectid=7): -5
[19582.231576] BTRFS error (device sdi): open_ctree failed
Failed to mount in degraded mode
So fix by setting all allocated ranges in the replace target device when
the replace operation is finishing, when we are holding the chunk mutex
and we can not race with new chunk allocations.
A test case for fstests follows soon.
Fixes:
1c11b63eff2a67 ("btrfs: replace pending/pinned chunks lists with io tree")
CC: stable@vger.kernel.org # 5.2+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Thu, 20 Aug 2020 15:18:27 +0000 (11:18 -0400)]
btrfs: move btrfs_rm_dev_replace_free_srcdev outside of all locks
When closing and freeing the source device we could end up doing our
final blkdev_put() on the bdev, which will grab the bd_mutex. As such
we want to be holding as few locks as possible, so move this call
outside of the dev_replace->lock_finishing_cancel_unmount lock. Since
we're modifying the fs_devices we need to make sure we're holding the
uuid_mutex here, so take that as well.
There's a report from syzbot probably hitting one of the cases where
the bd_mutex and device_list_mutex are taken in the wrong order, however
it's not with device replace, like this patch fixes. As there's no
reproducer available so far, we can't verify the fix.
https://lore.kernel.org/lkml/
000000000000fc04d105afcf86d7@google.com/
link: https://syzkaller.appspot.com/bug?extid=84a0634dc5d21d488419
WARNING: possible circular locking dependency detected
5.9.0-rc5-syzkaller #0 Not tainted
------------------------------------------------------
syz-executor.0/6878 is trying to acquire lock:
ffff88804c17d780 (&bdev->bd_mutex){+.+.}-{3:3}, at: blkdev_put+0x30/0x520 fs/block_dev.c:1804
but task is already holding lock:
ffff8880908cfce0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: close_fs_devices.part.0+0x2e/0x800 fs/btrfs/volumes.c:1159
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #4 (&fs_devs->device_list_mutex){+.+.}-{3:3}:
__mutex_lock_common kernel/locking/mutex.c:956 [inline]
__mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103
btrfs_finish_chunk_alloc+0x281/0xf90 fs/btrfs/volumes.c:5255
btrfs_create_pending_block_groups+0x2f3/0x700 fs/btrfs/block-group.c:2109
__btrfs_end_transaction+0xf5/0x690 fs/btrfs/transaction.c:916
find_free_extent_update_loop fs/btrfs/extent-tree.c:3807 [inline]
find_free_extent+0x23b7/0x2e60 fs/btrfs/extent-tree.c:4127
btrfs_reserve_extent+0x166/0x460 fs/btrfs/extent-tree.c:4206
cow_file_range+0x3de/0x9b0 fs/btrfs/inode.c:1063
btrfs_run_delalloc_range+0x2cf/0x1410 fs/btrfs/inode.c:1838
writepage_delalloc+0x150/0x460 fs/btrfs/extent_io.c:3439
__extent_writepage+0x441/0xd00 fs/btrfs/extent_io.c:3653
extent_write_cache_pages.constprop.0+0x69d/0x1040 fs/btrfs/extent_io.c:4249
extent_writepages+0xcd/0x2b0 fs/btrfs/extent_io.c:4370
do_writepages+0xec/0x290 mm/page-writeback.c:2352
__writeback_single_inode+0x125/0x1400 fs/fs-writeback.c:1461
writeback_sb_inodes+0x53d/0xf40 fs/fs-writeback.c:1721
wb_writeback+0x2ad/0xd40 fs/fs-writeback.c:1894
wb_do_writeback fs/fs-writeback.c:2039 [inline]
wb_workfn+0x2dc/0x13e0 fs/fs-writeback.c:2080
process_one_work+0x94c/0x1670 kernel/workqueue.c:2269
worker_thread+0x64c/0x1120 kernel/workqueue.c:2415
kthread+0x3b5/0x4a0 kernel/kthread.c:292
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294
-> #3 (sb_internal#2){.+.+}-{0:0}:
percpu_down_read include/linux/percpu-rwsem.h:51 [inline]
__sb_start_write+0x234/0x470 fs/super.c:1672
sb_start_intwrite include/linux/fs.h:1690 [inline]
start_transaction+0xbe7/0x1170 fs/btrfs/transaction.c:624
find_free_extent_update_loop fs/btrfs/extent-tree.c:3789 [inline]
find_free_extent+0x25e1/0x2e60 fs/btrfs/extent-tree.c:4127
btrfs_reserve_extent+0x166/0x460 fs/btrfs/extent-tree.c:4206
cow_file_range+0x3de/0x9b0 fs/btrfs/inode.c:1063
btrfs_run_delalloc_range+0x2cf/0x1410 fs/btrfs/inode.c:1838
writepage_delalloc+0x150/0x460 fs/btrfs/extent_io.c:3439
__extent_writepage+0x441/0xd00 fs/btrfs/extent_io.c:3653
extent_write_cache_pages.constprop.0+0x69d/0x1040 fs/btrfs/extent_io.c:4249
extent_writepages+0xcd/0x2b0 fs/btrfs/extent_io.c:4370
do_writepages+0xec/0x290 mm/page-writeback.c:2352
__writeback_single_inode+0x125/0x1400 fs/fs-writeback.c:1461
writeback_sb_inodes+0x53d/0xf40 fs/fs-writeback.c:1721
wb_writeback+0x2ad/0xd40 fs/fs-writeback.c:1894
wb_do_writeback fs/fs-writeback.c:2039 [inline]
wb_workfn+0x2dc/0x13e0 fs/fs-writeback.c:2080
process_one_work+0x94c/0x1670 kernel/workqueue.c:2269
worker_thread+0x64c/0x1120 kernel/workqueue.c:2415
kthread+0x3b5/0x4a0 kernel/kthread.c:292
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294
-> #2 ((work_completion)(&(&wb->dwork)->work)){+.+.}-{0:0}:
__flush_work+0x60e/0xac0 kernel/workqueue.c:3041
wb_shutdown+0x180/0x220 mm/backing-dev.c:355
bdi_unregister+0x174/0x590 mm/backing-dev.c:872
del_gendisk+0x820/0xa10 block/genhd.c:933
loop_remove drivers/block/loop.c:2192 [inline]
loop_control_ioctl drivers/block/loop.c:2291 [inline]
loop_control_ioctl+0x3b1/0x480 drivers/block/loop.c:2257
vfs_ioctl fs/ioctl.c:48 [inline]
__do_sys_ioctl fs/ioctl.c:753 [inline]
__se_sys_ioctl fs/ioctl.c:739 [inline]
__x64_sys_ioctl+0x193/0x200 fs/ioctl.c:739
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #1 (loop_ctl_mutex){+.+.}-{3:3}:
__mutex_lock_common kernel/locking/mutex.c:956 [inline]
__mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103
lo_open+0x19/0xd0 drivers/block/loop.c:1893
__blkdev_get+0x759/0x1aa0 fs/block_dev.c:1507
blkdev_get fs/block_dev.c:1639 [inline]
blkdev_open+0x227/0x300 fs/block_dev.c:1753
do_dentry_open+0x4b9/0x11b0 fs/open.c:817
do_open fs/namei.c:3251 [inline]
path_openat+0x1b9a/0x2730 fs/namei.c:3368
do_filp_open+0x17e/0x3c0 fs/namei.c:3395
do_sys_openat2+0x16d/0x420 fs/open.c:1168
do_sys_open fs/open.c:1184 [inline]
__do_sys_open fs/open.c:1192 [inline]
__se_sys_open fs/open.c:1188 [inline]
__x64_sys_open+0x119/0x1c0 fs/open.c:1188
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #0 (&bdev->bd_mutex){+.+.}-{3:3}:
check_prev_add kernel/locking/lockdep.c:2496 [inline]
check_prevs_add kernel/locking/lockdep.c:2601 [inline]
validate_chain kernel/locking/lockdep.c:3218 [inline]
__lock_acquire+0x2a96/0x5780 kernel/locking/lockdep.c:4426
lock_acquire+0x1f3/0xae0 kernel/locking/lockdep.c:5006
__mutex_lock_common kernel/locking/mutex.c:956 [inline]
__mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103
blkdev_put+0x30/0x520 fs/block_dev.c:1804
btrfs_close_bdev fs/btrfs/volumes.c:1117 [inline]
btrfs_close_bdev fs/btrfs/volumes.c:1107 [inline]
btrfs_close_one_device fs/btrfs/volumes.c:1133 [inline]
close_fs_devices.part.0+0x1a4/0x800 fs/btrfs/volumes.c:1161
close_fs_devices fs/btrfs/volumes.c:1193 [inline]
btrfs_close_devices+0x95/0x1f0 fs/btrfs/volumes.c:1179
close_ctree+0x688/0x6cb fs/btrfs/disk-io.c:4149
generic_shutdown_super+0x144/0x370 fs/super.c:464
kill_anon_super+0x36/0x60 fs/super.c:1108
btrfs_kill_super+0x38/0x50 fs/btrfs/super.c:2265
deactivate_locked_super+0x94/0x160 fs/super.c:335
deactivate_super+0xad/0xd0 fs/super.c:366
cleanup_mnt+0x3a3/0x530 fs/namespace.c:1118
task_work_run+0xdd/0x190 kernel/task_work.c:141
tracehook_notify_resume include/linux/tracehook.h:188 [inline]
exit_to_user_mode_loop kernel/entry/common.c:163 [inline]
exit_to_user_mode_prepare+0x1e1/0x200 kernel/entry/common.c:190
syscall_exit_to_user_mode+0x7e/0x2e0 kernel/entry/common.c:265
entry_SYSCALL_64_after_hwframe+0x44/0xa9
other info that might help us debug this:
Chain exists of:
&bdev->bd_mutex --> sb_internal#2 --> &fs_devs->device_list_mutex
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&fs_devs->device_list_mutex);
lock(sb_internal#2);
lock(&fs_devs->device_list_mutex);
lock(&bdev->bd_mutex);
*** DEADLOCK ***
3 locks held by syz-executor.0/6878:
#0:
ffff88809070c0e0 (&type->s_umount_key#70){++++}-{3:3}, at: deactivate_super+0xa5/0xd0 fs/super.c:365
#1:
ffffffff8a5b37a8 (uuid_mutex){+.+.}-{3:3}, at: btrfs_close_devices+0x23/0x1f0 fs/btrfs/volumes.c:1178
#2:
ffff8880908cfce0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: close_fs_devices.part.0+0x2e/0x800 fs/btrfs/volumes.c:1159
stack backtrace:
CPU: 0 PID: 6878 Comm: syz-executor.0 Not tainted 5.9.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x198/0x1fd lib/dump_stack.c:118
check_noncircular+0x324/0x3e0 kernel/locking/lockdep.c:1827
check_prev_add kernel/locking/lockdep.c:2496 [inline]
check_prevs_add kernel/locking/lockdep.c:2601 [inline]
validate_chain kernel/locking/lockdep.c:3218 [inline]
__lock_acquire+0x2a96/0x5780 kernel/locking/lockdep.c:4426
lock_acquire+0x1f3/0xae0 kernel/locking/lockdep.c:5006
__mutex_lock_common kernel/locking/mutex.c:956 [inline]
__mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103
blkdev_put+0x30/0x520 fs/block_dev.c:1804
btrfs_close_bdev fs/btrfs/volumes.c:1117 [inline]
btrfs_close_bdev fs/btrfs/volumes.c:1107 [inline]
btrfs_close_one_device fs/btrfs/volumes.c:1133 [inline]
close_fs_devices.part.0+0x1a4/0x800 fs/btrfs/volumes.c:1161
close_fs_devices fs/btrfs/volumes.c:1193 [inline]
btrfs_close_devices+0x95/0x1f0 fs/btrfs/volumes.c:1179
close_ctree+0x688/0x6cb fs/btrfs/disk-io.c:4149
generic_shutdown_super+0x144/0x370 fs/super.c:464
kill_anon_super+0x36/0x60 fs/super.c:1108
btrfs_kill_super+0x38/0x50 fs/btrfs/super.c:2265
deactivate_locked_super+0x94/0x160 fs/super.c:335
deactivate_super+0xad/0xd0 fs/super.c:366
cleanup_mnt+0x3a3/0x530 fs/namespace.c:1118
task_work_run+0xdd/0x190 kernel/task_work.c:141
tracehook_notify_resume include/linux/tracehook.h:188 [inline]
exit_to_user_mode_loop kernel/entry/common.c:163 [inline]
exit_to_user_mode_prepare+0x1e1/0x200 kernel/entry/common.c:190
syscall_exit_to_user_mode+0x7e/0x2e0 kernel/entry/common.c:265
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x460027
RSP: 002b:
00007fff59216328 EFLAGS:
00000246 ORIG_RAX:
00000000000000a6
RAX:
0000000000000000 RBX:
0000000000076035 RCX:
0000000000460027
RDX:
0000000000403188 RSI:
0000000000000002 RDI:
00007fff592163d0
RBP:
0000000000000333 R08:
0000000000000000 R09:
000000000000000b
R10:
0000000000000005 R11:
0000000000000246 R12:
00007fff59217460
R13:
0000000002df2a60 R14:
0000000000000000 R15:
00007fff59217460
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
[ add syzbot reference ]
Signed-off-by: David Sterba <dsterba@suse.com>
Ulf Hansson [Wed, 30 Sep 2020 11:20:23 +0000 (13:20 +0200)]
ARM: imx6q: Fixup RCU usage for cpuidle
The commit
eb1f00237aca ("lockdep,trace: Expose tracepoints"), started to
expose us for tracepoints. For imx6q cpuidle, this leads to an RCU splat
according to below.
[6.870684] [<
c0db7690>] (_raw_spin_lock) from [<
c011f6a4>] (imx6q_enter_wait+0x18/0x9c)
[6.878846] [<
c011f6a4>] (imx6q_enter_wait) from [<
c09abfb0>] (cpuidle_enter_state+0x168/0x5e4)
To fix the problem, let's assign the corresponding idlestate->flags the
CPUIDLE_FLAG_RCU_IDLE bit, which enables us to call rcu_idle_enter|exit()
at the proper point.
Reported-by: Dong Aisheng <aisheng.dong@nxp.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Yoann Congal [Tue, 29 Sep 2020 20:41:58 +0000 (22:41 +0200)]
Documentation: PM: Fix a reStructuredText syntax error
Fix a reStructuredText syntax error in the cpuidle PM admin-guide
documentation: the ``...'' quotation marks are parsed as partial ''...''
reStructuredText markup and break the output formatting.
This change them to "...".
Signed-off-by: Yoann Congal <yoann.congal@smile.fr>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Zhang Rui [Mon, 28 Sep 2020 03:33:42 +0000 (11:33 +0800)]
cpufreq: intel_pstate: Fix missing return statement
Fix missing return statement when writing "off" to intel_pstate status
sysfs I/F.
Fixes:
55671ea3257a ("cpufreq: intel_pstate: Free memory only when turning off")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Jacob Keller [Wed, 2 Sep 2020 15:53:42 +0000 (08:53 -0700)]
ice: preserve NVM capabilities in safe mode
If the driver initializes in safe mode, it will call
ice_set_safe_mode_caps. This results in clearing the capabilities
structures, in order to set them up for operating in safe mode, ensuring
many features are disabled.
This has a side effect of also clearing the capability bits that relate
to NVM update. The result is that the device driver will not indicate
support for unified update, even if the firmware is capable.
Fix this by adding the relevant capability fields to the list of values
we preserve. To simplify the code, use a common_cap structure instead of
a handful of local variables. To reduce some duplication of the
capability name, introduce a couple of macros used to restore the
capabilities values from the cached copy.
Fixes:
de9b277ee032 ("ice: Add support for unified NVM update flow capability")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Brijesh Behera <brijeshx.behera@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Jacob Keller [Wed, 26 Aug 2020 18:30:34 +0000 (11:30 -0700)]
ice: increase maximum wait time for flash write commands
The ice driver needs to wait for a firmware response to each command to
write a block of data to the scratch area used to update the device
firmware. The driver currently waits for up to 1 second for this to be
returned.
It turns out that firmware might take longer than 1 second to return
a completion in some cases. If this happens, the flash update will fail
to complete.
Fix this by increasing the maximum time that the driver will wait for
both writing a block of data, and for activating the new NVM bank. The
timeout for an erase command is already several minutes, as the firmware
had to erase the entire bank which was already expected to take a minute
or more in the worst case.
In the case where firmware really won't respond, we will now take longer
to fail. However, this ensures that if the firmware is simply slow to
respond, the flash update can still complete. This new maximum timeout
should not adversely increase the update time, as the implementation for
wait_event_interruptible_timeout, and should wake very soon after we get
a completion event. It is better for a flash update be slow but still
succeed than to fail because we gave up too quickly.
Fixes:
d69ea414c9b4 ("ice: implement device flash update via devlink")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Brijesh Behera <brijeshx.behera@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Jiansong Chen [Wed, 30 Sep 2020 07:30:24 +0000 (15:30 +0800)]
drm/amdgpu: disable gfxoff temporarily for navy_flounder
gfxoff is temporarily disabled for navy_flounder, since
at present the feature caused some tdr when performing
display operations.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
projects / linux-2.6-microblaze.git / log