git.monstr.eu Git - linux-2.6-microblaze.git/log

afs: Fix dynamic root lookup DNS check

In the afs dynamic root directory, the ->lookup() function does a DNS check
on the cell being asked for and if the DNS upcall reports an error it will
report an error back to userspace (typically ENOENT).

However, if a failed DNS upcall returns a new-style result, it will return
a valid result, with the status field set appropriately to indicate the
type of failure - and in that case, dns_query() doesn't return an error and
we let stat() complete with no error - which can cause confusion in
userspace as subsequent calls that trigger d_automount then fail with
ENOENT.

Fix this by checking the status result from a valid dns_query() and
returning an error if it indicates a failure.

Fixes: bbb4c4323a4d ("dns: Allow the dns resolver to retrieve a server set")
Reported-by: Markus Suvanto <markus.suvanto@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=216637
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Markus Suvanto <markus.suvanto@gmail.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org

afs: Fix the dynamic root's d_delete to always delete unused dentries

Fix the afs dynamic root's d_delete function to always delete unused
dentries rather than only deleting them if they're positive. With things
as they stand upstream, negative dentries stemming from failed DNS lookups
stick around preventing retries.

Fixes: 66c7e1d319a5 ("afs: Split the dynroot stuff out and give it its own ops tables")
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Markus Suvanto <markus.suvanto@gmail.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org

Linux 6.7-rc6

Merge tag 'perf_urgent_for_v6.7_rc6' of git://git./linux/kernel/git/tip/tip

Pull perf fix from Borislav Petkov:

- Avoid iterating over newly created group leader event's siblings
because there are none, and thus prevent a lockdep splat

* tag 'perf_urgent_for_v6.7_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix perf_event_validate_size() lockdep splat

Merge tag 'for-6.7-rc5-tag' of git://git./linux/kernel/git/kdave/linux

Pull btrfs fix from David Sterba:
"One more fix that verifies that the snapshot source is a root, same
  check is also done in user space but should be done by the ioctl as
  well"

* tag 'for-6.7-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: do not allow non subvolume root targets for snapshot

Merge tag 'soundwire-6.7-fixes' of git://git./linux/kernel/git/vkoul/soundwire

Pull soundwire fixes from Vinod Koul:

- Null pointer dereference for mult link in core

- AC timing fix in intel driver

* tag 'soundwire-6.7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: intel_ace2x: fix AC timing setting for ACE2.x
soundwire: stream: fix NULL pointer dereference for multi_link

Merge tag 'phy-fixes-6.7' of git://git./linux/kernel/git/phy/linux-phy

Pull phy fixes from Vinod Koul:

  - register offset fix for TI driver

  - mediatek driver minimal supported frequency fix

  - negative error code in probe fix for sunplus driver

* tag 'phy-fixes-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
  phy: sunplus: return negative error code in sp_usb_phy_probe
  phy: mediatek: mipi: mt8183: fix minimal supported frequency
  phy: ti: gmii-sel: Fix register offset when parent is not a syscon node

Merge tag 'dmaengine-fix-6.7' of git://git./linux/kernel/git/vkoul/dmaengine

Pull dmaengine fixes from Vinod Koul:

- SPI PDMA data fix for TI k3-psil drivers

- suspend fix, pointer check, logic for arbitration fix and channel
   leak fix in fsl-edma driver

- couple of fixes in idxd driver for GRPCFG descriptions and int_handle
   field handling

- single fix for stm32 driver for bitfield overflow

* tag 'dmaengine-fix-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
  dmaengine: fsl-edma: fix DMA channel leak in eDMAv4
  dmaengine: fsl-edma: fix wrong pointer check in fsl_edma3_attach_pd()
  dmaengine: idxd: Fix incorrect descriptions for GRPCFG register
  dmaengine: idxd: Protect int_handle field in hw descriptor
  dmaengine: stm32-dma: avoid bitfield overflow assertion
  dmaengine: fsl-edma: Add judgment on enabling round robin arbitration
  dmaengine: fsl-edma: Do not suspend and resume the masked dma channel when the system is sleeping
  dmaengine: ti: k3-psil-am62a: Fix SPI PDMA data
  dmaengine: ti: k3-psil-am62: Fix SPI PDMA data

Merge tag 'cxl-fixes-6.7-rc6' of git://git./linux/kernel/git/cxl/cxl

Pull CXL (Compute Express Link) fixes from Dan Williams:
"A collection of CXL fixes.

  The touch outside of drivers/cxl/ is for a helper that allocates
  physical address space. Device hotplug tests showed that the driver
  failed to utilize (skipped over) valid capacity when allocating a new
  memory region. Outside of that, new tests uncovered a small crop of
  lockdep reports.

  There is also some miscellaneous error path and leak fixups that are
  not urgent, but useful to cleanup now.

   - Fix alloc_free_mem_region()'s scan for address space, prevent false
     negative out-of-space events

   - Fix sleeping lock acquisition from CXL trace event (atomic context)

   - Fix put_device() like for the new CXL PMU driver

   - Fix wrong pointer freed on error path

   - Fixup several lockdep reports (missing lock hold) from new
     assertion in cxl_num_decoders_committed() and new tests"

* tag 'cxl-fixes-6.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
  cxl/pmu: Ensure put_device on pmu devices
  cxl/cdat: Free correct buffer on checksum error
  cxl/hdm: Fix dpa translation locking
  kernel/resource: Increment by align value in get_free_mem_region()
  cxl: Add cxl_num_decoders_committed() usage to cxl_test
  cxl/memdev: Hold region_rwsem during inject and clear poison ops
  cxl/core: Always hold region_rwsem while reading poison lists
  cxl/hdm: Fix a benign lockdep splat

Merge tag 'edac_urgent_for_v6.7_rc6' of git://git./linux/kernel/git/ras/ras

Pull EDAC fix from Borislav Petkov:

- A single fix for the EDAC Versal driver to read out register fields
properly

* tag 'edac_urgent_for_v6.7_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/versal: Read num_csrows and num_chans using the correct bitfield macro

Merge tag 'powerpc-6.7-5' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:

- Fix a bug where heavy VAS (accelerator) usage could race with
   partition migration and prevent the migration from completing.

- Update MAINTAINERS to add Aneesh & Naveen.

Thanks to Haren Myneni.

* tag 'powerpc-6.7-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  MAINTAINERS: powerpc: Add Aneesh & Naveen
  powerpc/pseries/vas: Migration suspend waits for no in-progress open windows

Merge tag 'clk-fixes-for-linus' of git://git./linux/kernel/git/clk/linux

Pull clk fixes from Stephen Boyd:
"A handful of clk fixes, mostly in the rockchip clk driver:

   - Fix a clk name, clk parent, and a register for a clk gate in the
     Rockchip rk3128 clk driver

   - Add a PLL frequency on Rockchip rk3568 to fix some display
     artifacts

   - Fix a kbuild dependency for Qualcomm's SM_CAMCC_8550 symbol so that
     it isn't possible to select the associated GCC driver"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: rockchip: rk3128: Fix SCLK_SDMMC's clock name
  clk: rockchip: rk3128: Fix aclk_peri_src's parent
  clk: qcom: Fix SM_CAMCC_8550 dependencies
  clk: rockchip: rk3128: Fix HCLK_OTG gate register
  clk: rockchip: rk3568: Add PLL rate for 292.5MHz

Merge tag 'trace-v6.7-rc5' of git://git./linux/kernel/git/trace/linux-trace

Pull tracing fixes from Steven Rostedt:

- Fix eventfs to check creating new files for events with names greater
   than NAME_MAX. The eventfs lookup needs to check the return result of
   simple_lookup().

- Fix the ring buffer to check the proper max data size. Events must be
   able to fit on the ring buffer sub-buffer, if it cannot, then it
   fails to be written and the logic to add the event is avoided. The
   code to check if an event can fit failed to add the possible absolute
   timestamp which may make the event not be able to fit. This causes
   the ring buffer to go into an infinite loop trying to find a
   sub-buffer that would fit the event. Luckily, there's a check that
   will bail out if it looped over a 1000 times and it also warns.

   The real fix is not to add the absolute timestamp to an event that is
   starting at the beginning of a sub-buffer because it uses the
   sub-buffer timestamp.

   By avoiding the timestamp at the start of the sub-buffer allows
   events that pass the first check to always find a sub-buffer that it
   can fit on.

- Have large events that do not fit on a trace_seq to print "LINE TOO
   BIG" like it does for the trace_pipe instead of what it does now
   which is to silently drop the output.

- Fix a memory leak of forgetting to free the spare page that is saved
   by a trace instance.

- Update the size of the snapshot buffer when the main buffer is
   updated if the snapshot buffer is allocated.

- Fix ring buffer timestamp logic by removing all the places that tried
   to put the before_stamp back to the write stamp so that the next
   event doesn't add an absolute timestamp. But each of these updates
   added a race where by making the two timestamp equal, it was
   validating the write_stamp so that it can be incorrectly used for
   calculating the delta of an event.

- There's a temp buffer used for printing the event that was using the
   event data size for allocation when it needed to use the size of the
   entire event (meta-data and payload data)

- For hardening, use "%.*s" for printing the trace_marker output, to
   limit the amount that is printed by the size of the event. This was
   discovered by development that added a bug that truncated the '\0'
   and caused a crash.

- Fix a use-after-free bug in the use of the histogram files when an
   instance is being removed.

- Remove a useless update in the rb_try_to_discard of the write_stamp.
   The before_stamp was already changed to force the next event to add
   an absolute timestamp that the write_stamp is not used. But the
   write_stamp is modified again using an unneeded 64-bit cmpxchg.

- Fix several races in the 32-bit implementation of the
   rb_time_cmpxchg() that does a 64-bit cmpxchg.

- While looking at fixing the 64-bit cmpxchg, I noticed that because
   the ring buffer uses normal cmpxchg, and this can be done in NMI
   context, there's some architectures that do not have a working
   cmpxchg in NMI context. For these architectures, fail recording
   events that happen in NMI context.

* tag 'trace-v6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  ring-buffer: Do not record in NMI if the arch does not support cmpxchg in NMI
  ring-buffer: Have rb_time_cmpxchg() set the msb counter too
  ring-buffer: Fix 32-bit rb_time_read() race with rb_time_cmpxchg()
  ring-buffer: Fix a race in rb_time_cmpxchg() for 32 bit archs
  ring-buffer: Remove useless update to write_stamp in rb_try_to_discard()
  ring-buffer: Do not try to put back write_stamp
  tracing: Fix uaf issue when open the hist or hist_debug file
  tracing: Add size check when printing trace_marker output
  ring-buffer: Have saved event hold the entire event
  ring-buffer: Do not update before stamp when switching sub-buffers
  tracing: Update snapshot buffer on resize if it is allocated
  ring-buffer: Fix memory leak of free page
  eventfs: Fix events beyond NAME_MAX blocking tasks
  tracing: Have large events show up as '[LINE TOO BIG]' instead of nothing
  ring-buffer: Fix writing to the buffer with max_data_size

Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull arm64 fixes from Catalin Marinas:

- Arm CMN perf: fix the DTC allocation failure path which can end up
   erroneously clearing live counters

- arm64/mm: fix hugetlb handling of the dirty page state leading to a
   continuous fault loop in user on hardware without dirty bit
   management (DBM). That's caused by the dirty+writeable information
   not being properly preserved across a series of mprotect(PROT_NONE),
   mprotect(PROT_READ|PROT_WRITE)

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: mm: Always make sw-dirty PTEs hw-dirty in pte_modify
  perf/arm-cmn: Fail DTC counter allocation correctly

Merge tag 'pci-v6.7-fixes-1' of git://git./linux/kernel/git/pci/pci

Pull pci fixes from Bjorn Helgaas:

- Limit Max_Read_Request_Size (MRRS) on some MIPS Loongson systems
   because they don't all support MRRS > 256, and firmware doesn't
   always initialize it correctly, which meant some PCIe devices didn't
   work (Jiaxun Yang)

- Add and use pci_enable_link_state_locked() to prevent potential
   deadlocks in vmd and qcom drivers (Johan Hovold)

- Revert recent (v6.5) acpiphp resource assignment changes that fixed
   issues with hot-adding devices on a root bus or with large BARs, but
   introduced new issues with GPU initialization and hot-adding SCSI
   disks in QEMU VMs and (Bjorn Helgaas)

* tag 'pci-v6.7-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
  Revert "PCI: acpiphp: Reassign resources on bridge if necessary"
  PCI/ASPM: Add pci_disable_link_state_locked() lockdep assert
  PCI/ASPM: Clean up __pci_disable_link_state() 'sem' parameter
  PCI: qcom: Clean up ASPM comment
  PCI: qcom: Fix potential deadlock when enabling ASPM
  PCI: vmd: Fix potential deadlock when enabling ASPM
  PCI/ASPM: Add pci_enable_link_state_locked()
  PCI: loongson: Limit MRRS to 256

btrfs: do not allow non subvolume root targets for snapshot

Our btrfs subvolume snapshot <source> <destination> utility enforces
that <source> is the root of the subvolume, however this isn't enforced
in the kernel. Update the kernel to also enforce this limitation to
avoid problems with other users of this ioctl that don't have the
appropriate checks in place.

Reported-by: Martin Michaelis <code@mgjm.de>
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

cred: get rid of CONFIG_DEBUG_CREDENTIALS

This code is rarely (never?) enabled by distros, and it hasn't caught
anything in decades. Let's kill off this legacy debug code.

Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cred: switch to using atomic_long_t

There are multiple ways to grab references to credentials, and the only
protection we have against overflowing it is the memory required to do
so.

With memory sizes only moving in one direction, let's bump the reference
count to 64-bit and move it outside the realm of feasibly overflowing.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Revert "PCI: acpiphp: Reassign resources on bridge if necessary"

This reverts commit 40613da52b13fb21c5566f10b287e0ca8c12c4e9 and the
subsequent fix to it:

  cc22522fd55e ("PCI: acpiphp: Use pci_assign_unassigned_bridge_resources() only for non-root bus")

40613da52b13 fixed a problem where hot-adding a device with large BARs
failed if the bridge windows programmed by firmware were not large enough.

cc22522fd55e ("PCI: acpiphp: Use pci_assign_unassigned_bridge_resources()
only for non-root bus") fixed a problem with 40613da52b13: an ACPI hot-add
of a device on a PCI root bus (common in the virt world) or firmware
sending ACPI Bus Check to non-existent Root Ports (e.g., on Dell Inspiron
7352/0W6WV0) caused a NULL pointer dereference and suspend/resume hangs.

Unfortunately the combination of 40613da52b13 and cc22522fd55e caused other
problems:

  - Fiona reported that hot-add of SCSI disks in QEMU virtual machine fails
    sometimes.

  - Dongli reported a similar problem with hot-add of SCSI disks.

  - Jonathan reported a console freeze during boot on bare metal due to an
    error in radeon GPU initialization.

Revert both patches to avoid adding these problems.  This means we will
again see the problems with hot-adding devices with large BARs and the NULL
pointer dereferences and suspend/resume issues that 40613da52b13 and
cc22522fd55e were intended to fix.

Fixes: 40613da52b13 ("PCI: acpiphp: Reassign resources on bridge if necessary")
Fixes: cc22522fd55e ("PCI: acpiphp: Use pci_assign_unassigned_bridge_resources() only for non-root bus")
Reported-by: Fiona Ebner <f.ebner@proxmox.com>
Closes: https://lore.kernel.org/r/9eb669c0-d8f2-431d-a700-6da13053ae54@proxmox.com
Reported-by: Dongli Zhang <dongli.zhang@oracle.com>
Closes: https://lore.kernel.org/r/3c4a446a-b167-11b8-f36f-d3c1b49b42e9@oracle.com
Reported-by: Jonathan Woithe <jwoithe@just42.net>
Closes: https://lore.kernel.org/r/ZXpaNCLiDM+Kv38H@marvin.atrad.com.au
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Cc: <stable@vger.kernel.org>

Merge tag 'io_uring-6.7-2023-12-15' of git://git.kernel.dk/linux

Pull io_uring fixes from Jens Axboe:
"Just two minor fixes:

   - Fix for the io_uring socket option commands using the wrong value
     on some archs (Al)

   - Tweak to the poll lazy wake enable (me)"

* tag 'io_uring-6.7-2023-12-15' of git://git.kernel.dk/linux:
  io_uring/cmd: fix breakage in SOCKET_URING_OP_SIOC* implementation
  io_uring/poll: don't enable lazy wake for POLLEXCLUSIVE

Merge tag 'mm-hotfixes-stable-2023-12-15-07-11' of git://git./linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
"17 hotfixes. 8 are cc:stable and the other 9 pertain to post-6.6
  issues"

* tag 'mm-hotfixes-stable-2023-12-15-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  mm/mglru: reclaim offlined memcgs harder
  mm/mglru: respect min_ttl_ms with memcgs
  mm/mglru: try to stop at high watermarks
  mm/mglru: fix underprotected page cache
  mm/shmem: fix race in shmem_undo_range w/THP
  Revert "selftests: error out if kernel header files are not yet built"
  crash_core: fix the check for whether crashkernel is from high memory
  x86, kexec: fix the wrong ifdeffery CONFIG_KEXEC
  sh, kexec: fix the incorrect ifdeffery and dependency of CONFIG_KEXEC
  mips, kexec: fix the incorrect ifdeffery and dependency of CONFIG_KEXEC
  m68k, kexec: fix the incorrect ifdeffery and build dependency of CONFIG_KEXEC
  loongarch, kexec: change dependency of object files
  mm/damon/core: make damon_start() waits until kdamond_fn() starts
  selftests/mm: cow: print ksft header before printing anything else
  mm: fix VMA heap bounds checking
  riscv: fix VMALLOC_START definition
  kexec: drop dependency on ARCH_SUPPORTS_KEXEC from CRASH_DUMP

Merge tag 'sound-6.7-rc6' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
"A collection of HD-audio quirks for TAS2781 codec and device-specific
  workarounds"

* tag 'sound-6.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/tas2781: reset the amp before component_add
  ALSA: hda/tas2781: call cleanup functions only once
  ALSA: hda/tas2781: handle missing EFI calibration data
  ALSA: hda/tas2781: leave hda_component in usable state
  ALSA: hda/realtek: Apply mute LED quirk for HP15-db
  ALSA: hda/hdmi: add force-connect quirks for ASUSTeK Z170 variants
  ALSA: hda/hdmi: add force-connect quirk for NUC5CPYB

Merge tag 'drm-fixes-2023-12-15' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
"More regular fixes, amdgpu, i915, mediatek and nouveau are most of
  them this week. Nothing too major, then a few misc bits and pieces in
  core, panel and ivpu.

  drm:
   - fix uninit problems in crtc
   - fix fd ownership check
   - edid: add modes in fallback paths

  panel:
   - move LG panel into DSI yaml
   - ltk050h3146w: set burst mode

  mediatek:
   - mtk_disp_gamma: Fix breakage due to merge issue
   - fix kernel oops if no crtc is found
   - Add spinlock for setting vblank event in atomic_begin
   - Fix access violation in mtk_drm_crtc_dma_dev_get

  i915:
   - Fix selftest engine reset count storage for multi-tile
   - Fix out-of-bounds reads for engine reset counts
   - Fix ADL+ remapped stride with CCS
   - Fix intel_atomic_setup_scalers() plane_state handling
   - Fix ADL+ tiled plane stride when the POT stride is smaller than the original
   - Fix eDP 1.4 rate select method link configuration

  amdgpu:
   - Fix suspend fix that got accidently mangled last week
   - Fix OD regression
   - PSR fixes
   - OLED Backlight regression fix
   - JPEG 4.0.5 fix
   - Misc display fixes
   - SDMA 5.2 fix
   - SDMA 2.4 regression fix
   - GPUVM race fix

  nouveau:
   - fix gk20a instobj hierarchy
   - fix headless iors inheritance regression

  ivpu:
   - fix WA initialisation"

* tag 'drm-fixes-2023-12-15' of git://anongit.freedesktop.org/drm/drm: (31 commits)
  drm/nouveau/kms/nv50-: Don't allow inheritance of headless iors
  drm/nouveau: Fixup gk20a instobj hierarchy
  drm/amdgpu: warn when there are still mappings when a BO is destroyed v2
  drm/amdgpu: fix tear down order in amdgpu_vm_pt_free
  drm/amd: Fix a probing order problem on SDMA 2.4
  drm/amdgpu/sdma5.2: add begin/end_use ring callbacks
  drm/panel: ltk050h3146w: Set burst mode for ltk050h3148w
  dt-bindings: panel-simple-dsi: move LG 5" HD TFT LCD panel into DSI yaml
  drm/amd/display: Disable PSR-SU on Parade 0803 TCON again
  drm/amd/display: Populate dtbclk from bounding box
  drm/amd/display: Revert "Fix conversions between bytes and KB"
  drm/amdgpu/jpeg: configure doorbell for each playback
  drm/amd/display: Restore guard against default backlight value < 1 nit
  drm/amd/display: fix hw rotated modes when PSR-SU is enabled
  drm/amd/pm: fix pp_*clk_od typo
  drm/amdgpu: fix buffer funcs setting order on suspend harder
  drm/mediatek: Fix access violation in mtk_drm_crtc_dma_dev_get
  drm/edid: also call add modes in EDID connector update fallback
  drm/i915/edp: don't write to DP_LINK_BW_SET when using rate select
  drm/i915: Fix ADL+ tiled plane stride when the POT stride is smaller than the original
  ...

ring-buffer: Do not record in NMI if the arch does not support cmpxchg in NMI

As the ring buffer recording requires cmpxchg() to work, if the
architecture does not support cmpxchg in NMI, then do not do any recording
within an NMI.

Link: https://lore.kernel.org/linux-trace-kernel/20231213175403.6fc18540@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

ring-buffer: Have rb_time_cmpxchg() set the msb counter too

The rb_time_cmpxchg() on 32-bit architectures requires setting three
32-bit words to represent the 64-bit timestamp, with some salt for
synchronization. Those are: msb, top, and bottom

The issue is, the rb_time_cmpxchg() did not properly salt the msb portion,
and the msb that was written was stale.

Link: https://lore.kernel.org/linux-trace-kernel/20231215084114.20899342@rorschach.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: f03f2abce4f39 ("ring-buffer: Have 32 bit time stamps use all 64 bits")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

ring-buffer: Fix 32-bit rb_time_read() race with rb_time_cmpxchg()

The following race can cause rb_time_read() to observe a corrupted time
stamp:

rb_time_cmpxchg()
[...]
        if (!rb_time_read_cmpxchg(&t->msb, msb, msb2))
                return false;
        if (!rb_time_read_cmpxchg(&t->top, top, top2))
                return false;
<interrupted before updating bottom>
__rb_time_read()
[...]
        do {
                c = local_read(&t->cnt);
                top = local_read(&t->top);
                bottom = local_read(&t->bottom);
                msb = local_read(&t->msb);
        } while (c != local_read(&t->cnt));

        *cnt = rb_time_cnt(top);

        /* If top and msb counts don't match, this interrupted a write */
        if (*cnt != rb_time_cnt(msb))
                return false;
          ^ this check fails to catch that "bottom" is still not updated.

So the old "bottom" value is returned, which is wrong.

Fix this by checking that all three of msb, top, and bottom 2-bit cnt
values match.

The reason to favor checking all three fields over requiring a specific
update order for both rb_time_set() and rb_time_cmpxchg() is because
checking all three fields is more robust to handle partial failures of
rb_time_cmpxchg() when interrupted by nested rb_time_set().

Link: https://lore.kernel.org/lkml/20231211201324.652870-1-mathieu.desnoyers@efficios.com/
Link: https://lore.kernel.org/linux-trace-kernel/20231212193049.680122-1-mathieu.desnoyers@efficios.com
Fixes: f458a1453424e ("ring-buffer: Test last update in 32bit version of __rb_time_read()")
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

ring-buffer: Fix a race in rb_time_cmpxchg() for 32 bit archs

Mathieu Desnoyers pointed out an issue in the rb_time_cmpxchg() for 32 bit
architectures. That is:

static bool rb_time_cmpxchg(rb_time_t *t, u64 expect, u64 set)
{
unsigned long cnt, top, bottom, msb;
unsigned long cnt2, top2, bottom2, msb2;
u64 val;

/* The cmpxchg always fails if it interrupted an update */
if (!__rb_time_read(t, &val, &cnt2))
return false;

if (val != expect)
return false;

<<<< interrupted here!

cnt = local_read(&t->cnt);

The problem is that the synchronization counter in the rb_time_t is read
*after* the value of the timestamp is read. That means if an interrupt
were to come in between the value being read and the counter being read,
it can change the value and the counter and the interrupted process would
be clueless about it!

The counter needs to be read first and then the value. That way it is easy
to tell if the value is stale or not. If the counter hasn't been updated,
then the value is still good.

Link: https://lore.kernel.org/linux-trace-kernel/20231211201324.652870-1-mathieu.desnoyers@efficios.com/
Link: https://lore.kernel.org/linux-trace-kernel/20231212115301.7a9c9a64@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Fixes: 10464b4aa605e ("ring-buffer: Add rb_time_t 64 bit operations for speeding up 32 bit")
Reported-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

ring-buffer: Remove useless update to write_stamp in rb_try_to_discard()

When filtering is enabled, a temporary buffer is created to place the
content of the trace event output so that the filter logic can decide
from the trace event output if the trace event should be filtered out or
not. If it is to be filtered out, the content in the temporary buffer is
simply discarded, otherwise it is written into the trace buffer.

But if an interrupt were to come in while a previous event was using that
temporary buffer, the event written by the interrupt would actually go
into the ring buffer itself to prevent corrupting the data on the
temporary buffer. If the event is to be filtered out, the event in the
ring buffer is discarded, or if it fails to discard because another event
were to have already come in, it is turned into padding.

The update to the write_stamp in the rb_try_to_discard() happens after a
fix was made to force the next event after the discard to use an absolute
timestamp by setting the before_stamp to zero so it does not match the
write_stamp (which causes an event to use the absolute timestamp).

But there's an effort in rb_try_to_discard() to put back the write_stamp
to what it was before the event was added. But this is useless and
wasteful because nothing is going to be using that write_stamp for
calculations as it still will not match the before_stamp.

Remove this useless update, and in doing so, we remove another
cmpxchg64()!

Also update the comments to reflect this change as well as remove some
extra white space in another comment.

Link: https://lore.kernel.org/linux-trace-kernel/20231215081810.1f4f38fe@rorschach.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Vincent Donnefort <vdonnefort@google.com>
Fixes: b2dd797543cf ("ring-buffer: Force absolute timestamp on discard of event")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

ring-buffer: Do not try to put back write_stamp

If an update to an event is interrupted by another event between the time
the initial event allocated its buffer and where it wrote to the
write_stamp, the code try to reset the write stamp back to the what it had
just overwritten. It knows that it was overwritten via checking the
before_stamp, and if it didn't match what it wrote to the before_stamp
before it allocated its space, it knows it was overwritten.

To put back the write_stamp, it uses the before_stamp it read. The problem
here is that by writing the before_stamp to the write_stamp it makes the
two equal again, which means that the write_stamp can be considered valid
as the last timestamp written to the ring buffer. But this is not
necessarily true. The event that interrupted the event could have been
interrupted in a way that it was interrupted as well, and can end up
leaving with an invalid write_stamp. But if this happens and returns to
this context that uses the before_stamp to update the write_stamp again,
it can possibly incorrectly make it valid, causing later events to have in
correct time stamps.

As it is OK to leave this function with an invalid write_stamp (one that
doesn't match the before_stamp), there's no reason to try to make it valid
again in this case. If this race happens, then just leave with the invalid
write_stamp and the next event to come along will just add a absolute
timestamp and validate everything again.

Bonus points: This gets rid of another cmpxchg64!

Link: https://lore.kernel.org/linux-trace-kernel/20231214222921.193037a7@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Vincent Donnefort <vdonnefort@google.com>
Fixes: a389d86f7fd09 ("ring-buffer: Have nested events still record running time stamp")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

EDAC/versal: Read num_csrows and num_chans using the correct bitfield macro

Fix the extraction of num_csrows and num_chans. The extraction of the
num_rows is wrong. Instead of extracting using the FIELD_GET it is
calling FIELD_PREP.

The issue was masked as the default design has the rows as 0.

Fixes: 6f15b178cd63 ("EDAC/versal: Add a Xilinx Versal memory controller driver")
Closes: https://lore.kernel.org/all/60ca157e-6eff-d12c-9dc0-8aeab125edda@linux-m68k.org/
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20231215053352.8740-1-shubhrajyoti.datta@amd.com

perf: Fix perf_event_validate_size() lockdep splat

When lockdep is enabled, the for_each_sibling_event(sibling, event)
macro checks that event->ctx->mutex is held. When creating a new group
leader event, we call perf_event_validate_size() on a partially
initialized event where event->ctx is NULL, and so when
for_each_sibling_event() attempts to check event->ctx->mutex, we get a
splat, as reported by Lucas De Marchi:

WARNING: CPU: 8 PID: 1471 at kernel/events/core.c:1950 __do_sys_perf_event_open+0xf37/0x1080

This only happens for a new event which is its own group_leader, and in
this case there cannot be any sibling events. Thus it's safe to skip the
check for siblings, which avoids having to make invasive and ugly
changes to for_each_sibling_event().

Avoid the splat by bailing out early when the new event is its own
group_leader.

Fixes: 382c27f4ed28f803 ("perf: Fix perf_event_validate_size()")
Closes: https://lore.kernel.org/lkml/20231214000620.3081018-1-lucas.demarchi@intel.com/
Closes: https://lore.kernel.org/lkml/ZXpm6gQ%2Fd59jGsuW@xpf.sh.intel.com/
Reported-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20231215112450.3972309-1-mark.rutland@arm.com

cxl/pmu: Ensure put_device on pmu devices

The following kmemleaks were detected when removing the cxl module
stack:

unreferenced object 0xffff88822616b800 (size 1024):
...
  backtrace:
    [<00000000bedc6f83>] kmalloc_trace+0x26/0x90
    [<00000000448d1afc>] devm_cxl_pmu_add+0x3a/0x110 [cxl_core]
    [<00000000ca3bfe16>] 0xffffffffa105213b
    [<00000000ba7f78dc>] local_pci_probe+0x41/0x90
    [<000000005bb027ac>] pci_device_probe+0xb0/0x1c0
...
unreferenced object 0xffff8882260abcc0 (size 16):
...
  hex dump (first 16 bytes):
    70 6d 75 5f 6d 65 6d 30 2e 30 00 26 82 88 ff ff  pmu_mem0.0.&....
  backtrace:
...
    [<00000000152b5e98>] dev_set_name+0x43/0x50
    [<00000000c228798b>] devm_cxl_pmu_add+0x102/0x110 [cxl_core]
    [<00000000ca3bfe16>] 0xffffffffa105213b
    [<00000000ba7f78dc>] local_pci_probe+0x41/0x90
    [<000000005bb027ac>] pci_device_probe+0xb0/0x1c0
...
unreferenced object 0xffff8882272af200 (size 256):
...
  backtrace:
    [<00000000bedc6f83>] kmalloc_trace+0x26/0x90
    [<00000000a14d1813>] device_add+0x4ea/0x890
    [<00000000a3f07b47>] devm_cxl_pmu_add+0xbe/0x110 [cxl_core]
    [<00000000ca3bfe16>] 0xffffffffa105213b
    [<00000000ba7f78dc>] local_pci_probe+0x41/0x90
    [<000000005bb027ac>] pci_device_probe+0xb0/0x1c0
...

devm_cxl_pmu_add() correctly registers a device remove function but it
only calls device_del() which is only part of device unregistration.

Properly call device_unregister() to free up the memory associated with
the device.

Fixes: 1ad3f701c399 ("cxl/pci: Find and register CXL PMU devices")
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20231016-pmu-unregister-fix-v1-1-1e2eb2fa3c69@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

drm/nouveau/kms/nv50-: Don't allow inheritance of headless iors

Turns out we made a silly mistake when coming up with OR inheritance on
nouveau. On pre-DCB 4.1, iors are statically routed to output paths via the
DCB. On later generations iors are only routed to an output path if they're
actually being used. Unfortunately, it appears with NVIF_OUTP_INHERIT_V0 we
make the mistake of assuming the later is true on all generations, which is
currently leading us to return bogus ior -> head assignments through nvif,
which causes WARN_ON().

So - fix this by verifying that we actually know that there's a head
assigned to an ior before allowing it to be inherited through nvif. This
-should- hopefully fix the WARN_ON on GT218 reported by Borislav.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Reported-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231214004359.1028109-1-lyude@redhat.com

drm/nouveau: Fixup gk20a instobj hierarchy

Commit 12c9b05da918 ("drm/nouveau/imem: support allocations not
preserved across suspend") uses container_of() to cast from struct
nvkm_memory to struct nvkm_instobj, assuming that all instance objects
are derived from struct nvkm_instobj. For the gk20a family that's not
the case and they are derived from struct nvkm_memory instead. This
causes some subtle data corruption (nvkm_instobj.preserve ends up
mapping to gk20a_instobj.vaddr) that causes a NULL pointer dereference
in gk20a_instobj_acquire_iommu() (and possibly elsewhere) and also
prevents suspend/resume from working.

Fix this by making struct gk20a_instobj derive from struct nvkm_instobj
instead.

Fixes: 12c9b05da918 ("drm/nouveau/imem: support allocations not preserved across suspend")
Reported-by: Jonathan Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231208104653.1917055-1-thierry.reding@gmail.com

Merge tag '6.7-rc5-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull smb client fixes from Steve French:
"Address OOBs and NULL dereference found by Dr. Morris's recent
  analysis and fuzzing.

  All marked for stable as well"

* tag '6.7-rc5-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  smb: client: fix OOB in smb2_query_reparse_point()
  smb: client: fix NULL deref in asn1_ber_decoder()
  smb: client: fix potential OOBs in smb2_parse_contexts()
  smb: client: fix OOB in receive_encrypted_standard()

Merge tag 'drm-misc-fixes-2023-12-14' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

drm-misc-fixes for v6.7-rc6:
- Fix regression for checking if FD is master capable.
- Fix uninitialized variables in drm/crtc.
- Fix ivpu w/a.
- Refresh modes correctly when updating EDID.
- Small panel fixes.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2d46b68f-c5a4-45e5-beb4-411569f4aac8@linux.intel.com

Merge tag 'amd-drm-fixes-6.7-2023-12-13' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-6.7-2023-12-13:

amdgpu:
- Fix suspend fix that got accidently mangled last week
- Fix OD regression
- PSR fixes
- OLED Backlight regression fix
- JPEG 4.0.5 fix
- Misc display fixes
- SDMA 5.2 fix
- SDMA 2.4 regression fix
- GPUVM race fix

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231213221122.4937-1-alexander.deucher@amd.com

Merge tag 'platform-drivers-x86-v6.7-4' of git://git./linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Ilpo Järvinen:

- tablet-mode-switch events fix

- kernel-doc warning fixes

* tag 'platform-drivers-x86-v6.7-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86: intel_ips: fix kernel-doc formatting
  platform/x86: thinkpad_acpi: fix kernel-doc warnings
  platform/x86: intel-vbtn: Fix missing tablet-mode-switch events

Merge tag 'drm-intel-fixes-2023-12-13' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

drm/i915 fixes for v6.7-rc6:
- Fix selftest engine reset count storage for multi-tile
- Fix out-of-bounds reads for engine reset counts
- Fix ADL+ remapped stride with CCS
- Fix intel_atomic_setup_scalers() plane_state handling
- Fix ADL+ tiled plane stride when the POT stride is smaller than the original
- Fix eDP 1.4 rate select method link configuration

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/871qbqw4rw.fsf@intel.com

io_uring/cmd: fix breakage in SOCKET_URING_OP_SIOC* implementation

In 8e9fad0e70b7 "io_uring: Add io_uring command support for sockets"
you've got an include of asm-generic/ioctls.h done in io_uring/uring_cmd.c.
That had been done for the sake of this chunk -
+               ret = prot->ioctl(sk, SIOCINQ, &arg);
+               if (ret)
+                       return ret;
+               return arg;
+       case SOCKET_URING_OP_SIOCOUTQ:
+               ret = prot->ioctl(sk, SIOCOUTQ, &arg);

SIOC{IN,OUT}Q are defined to symbols (FIONREAD and TIOCOUTQ) that come from
ioctls.h, all right, but the values vary by the architecture.

FIONREAD is
0x467F on mips
0x4004667F on alpha, powerpc and sparc
0x8004667F on sh and xtensa
0x541B everywhere else
TIOCOUTQ is
0x7472 on mips
0x40047473 on alpha, powerpc and sparc
0x80047473 on sh and xtensa
0x5411 everywhere else

->ioctl() expects the same values it would've gotten from userland; all
places where we compare with SIOC{IN,OUT}Q are using asm/ioctls.h, so
they pick the correct values.  io_uring_cmd_sock(), OTOH, ends up
passing the default ones.

Fixes: 8e9fad0e70b7 ("io_uring: Add io_uring command support for sockets")
Cc: <stable@vger.kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/20231214213408.GT1674809@ZenIV
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge tag 'net-6.7-rc6' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Paolo Abeni:
"Current release - regressions:

   - tcp: fix tcp_disordered_ack() vs usec TS resolution

  Current release - new code bugs:

   - dpll: sanitize possible null pointer dereference in
     dpll_pin_parent_pin_set()

   - eth: octeon_ep: initialise control mbox tasks before using APIs

  Previous releases - regressions:

   - io_uring/af_unix: disable sending io_uring over sockets

   - eth: mlx5e:
       - TC, don't offload post action rule if not supported
       - fix possible deadlock on mlx5e_tx_timeout_work

   - eth: iavf: fix iavf_shutdown to call iavf_remove instead iavf_close

   - eth: bnxt_en: fix skb recycling logic in bnxt_deliver_skb()

   - eth: ena: fix DMA syncing in XDP path when SWIOTLB is on

   - eth: team: fix use-after-free when an option instance allocation
     fails

  Previous releases - always broken:

   - neighbour: don't let neigh_forced_gc() disable preemption for long

   - net: prevent mss overflow in skb_segment()

   - ipv6: support reporting otherwise unknown prefix flags in
     RTM_NEWPREFIX

   - tcp: remove acked SYN flag from packet in the transmit queue
     correctly

   - eth: octeontx2-af:
       - fix a use-after-free in rvu_nix_register_reporters
       - fix promisc mcam entry action

   - eth: dwmac-loongson: make sure MDIO is initialized before use

   - eth: atlantic: fix double free in ring reinit logic"

* tag 'net-6.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits)
  net: atlantic: fix double free in ring reinit logic
  appletalk: Fix Use-After-Free in atalk_ioctl
  net: stmmac: Handle disabled MDIO busses from devicetree
  net: stmmac: dwmac-qcom-ethqos: Fix drops in 10M SGMII RX
  dpaa2-switch: do not ask for MDB, VLAN and FDB replay
  dpaa2-switch: fix size of the dma_unmap
  net: prevent mss overflow in skb_segment()
  vsock/virtio: Fix unsigned integer wrap around in virtio_transport_has_space()
  Revert "tcp: disable tcp_autocorking for socket when TCP_NODELAY flag is set"
  MIPS: dts: loongson: drop incorrect dwmac fallback compatible
  stmmac: dwmac-loongson: drop useless check for compatible fallback
  stmmac: dwmac-loongson: Make sure MDIO is initialized before use
  tcp: disable tcp_autocorking for socket when TCP_NODELAY flag is set
  dpll: sanitize possible null pointer dereference in dpll_pin_parent_pin_set()
  net: ena: Fix XDP redirection error
  net: ena: Fix DMA syncing in XDP path when SWIOTLB is on
  net: ena: Fix xdp drops handling due to multibuf packets
  net: ena: Destroy correct number of xdp queues upon failure
  net: Remove acked SYN flag from packet in the transmit queue correctly
  qed: Fix a potential use-after-free in qed_cxt_tables_alloc
  ...

Merge tag 'for-6.7-rc5-tag' of git://git./linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:
  "Some fixes to quota accounting code, mostly around error handling and
   correctness:

   - free reserves on various error paths, after IO errors or
     transaction abort

   - don't clear reserved range at the folio release time, it'll be
     properly cleared after final write

   - fix integer overflow due to int used when passing around size of
     freed reservations

   - fix a regression in squota accounting that missed some cases with
     delayed refs"

* tag 'for-6.7-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: ensure releasing squota reserve on head refs
  btrfs: don't clear qgroup reserved bit in release_folio
  btrfs: free qgroup pertrans reserve on transaction abort
  btrfs: fix qgroup_free_reserved_data int overflow
  btrfs: free qgroup reserve when ORDERED_IOERR is set

net: atlantic: fix double free in ring reinit logic

Driver has a logic leak in ring data allocation/free,
where double free may happen in aq_ring_free if system is under
stress and driver init/deinit is happening.

The probability is higher to get this during suspend/resume cycle.

Verification was done simulating same conditions with

stress -m 2000 --vm-bytes 20M --vm-hang 10 --backoff 1000
while true; do sudo ifconfig enp1s0 down; sudo ifconfig enp1s0 up; done

Fixed by explicitly clearing pointers to NULL on deallocation

Fixes: 018423e90bee ("net: ethernet: aquantia: Add ring support code")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Closes: https://lore.kernel.org/netdev/CAHk-=wiZZi7FcvqVSUirHBjx0bBUZ4dFrMDVLc3+3HCrtq0rBA@mail.gmail.com/
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Link: https://lore.kernel.org/r/20231213094044.22988-1-irusskikh@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

ALSA: hda/tas2781: reset the amp before component_add

Calling component_add starts loading the firmware, the callback function
writes the program to the amplifiers. If the module resets the
amplifiers after component_add, it happens that one of the amplifiers
does not work because the reset and program writing are interleaving.

Call tas2781_reset before component_add to ensure reliable
initialization.

Fixes: 5be27f1e3ec9 ("ALSA: hda/tas2781: Add tas2781 HDA driver")
CC: stable@vger.kernel.org
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/4d23bf58558e23ee8097de01f70f1eb8d9de2d15.1702511246.git.soyer@irl.hu
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: hda/tas2781: call cleanup functions only once

If the module can load the RCA but not the firmware binary, it will call
the cleanup functions. Then unloading the module causes general
protection fault due to double free.

Do not call the cleanup functions in tasdev_fw_ready.

general protection fault, probably for non-canonical address
0x6f2b8a2bff4c8fec: 0000 [#1] PREEMPT SMP NOPTI
Call Trace:
<TASK>
? die_addr+0x36/0x90
? exc_general_protection+0x1c5/0x430
? asm_exc_general_protection+0x26/0x30
? tasdevice_config_info_remove+0x6d/0xd0 [snd_soc_tas2781_fmwlib]
tas2781_hda_unbind+0xaa/0x100 [snd_hda_scodec_tas2781_i2c]
component_unbind+0x2e/0x50
component_unbind_all+0x92/0xa0
component_del+0xa8/0x140
tas2781_hda_remove.isra.0+0x32/0x60 [snd_hda_scodec_tas2781_i2c]
i2c_device_remove+0x26/0xb0

Fixes: 5be27f1e3ec9 ("ALSA: hda/tas2781: Add tas2781 HDA driver")
CC: stable@vger.kernel.org
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/1a0885c424bb21172702d254655882b59ef6477a.1702510018.git.soyer@irl.hu
Signed-off-by: Takashi Iwai <tiwai@suse.de>

appletalk: Fix Use-After-Free in atalk_ioctl

Because atalk_ioctl() accesses sk->sk_receive_queue
without holding a sk->sk_receive_queue.lock, it can
cause a race with atalk_recvmsg().
A use-after-free for skb occurs with the following flow.
```
atalk_ioctl() -> skb_peek()
atalk_recvmsg() -> skb_recv_datagram() -> skb_free_datagram()
```
Add sk->sk_receive_queue.lock to atalk_ioctl() to fix this issue.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Hyunwoo Kim <v4bel@theori.io>
Link: https://lore.kernel.org/r/20231213041056.GA519680@v4bel-B760M-AORUS-ELITE-AX
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: stmmac: Handle disabled MDIO busses from devicetree

Many hardware configurations have the MDIO bus disabled, and are instead
using some other MDIO bus to talk to the MAC's phy.

of_mdiobus_register() returns -ENODEV in this case. Let's handle it
gracefully instead of failing to probe the MAC.

Fixes: 47dd7a540b8a ("net: add support for STMicroelectronics Ethernet controllers.")
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20231212-b4-stmmac-handle-mdio-enodev-v2-1-600171acf79f@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: stmmac: dwmac-qcom-ethqos: Fix drops in 10M SGMII RX

In 10M SGMII mode all the packets are being dropped due to wrong Rx clock.
SGMII 10MBPS mode needs RX clock divider programmed to avoid drops in Rx.
Update configure SGMII function with Rx clk divider programming.

Fixes: 463120c31c58 ("net: stmmac: dwmac-qcom-ethqos: add support for SGMII")
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Sneh Shah <quic_snehshah@quicinc.com>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20231212092208.22393-1-quic_snehshah@quicinc.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge branch '40GbE' of git://git./linux/kernel/git/tnguy/net-queue

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2023-12-12 (iavf)

This series contains updates to iavf driver only.

Piotr reworks Flow Director states to deal with issues in restoring
filters.

Slawomir fixes shutdown processing as it was missing needed calls.

* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  iavf: Fix iavf_shutdown to call iavf_remove instead iavf_close
  iavf: Handle ntuple on/off based on new state machines for flow director
  iavf: Introduce new state machines for flow director
====================

Link: https://lore.kernel.org/r/20231212203613.513423-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tracing: Fix uaf issue when open the hist or hist_debug file

KASAN report following issue. The root cause is when opening 'hist'
file of an instance and accessing 'trace_event_file' in hist_show(),
but 'trace_event_file' has been freed due to the instance being removed.
'hist_debug' file has the same problem. To fix it, call
tracing_{open,release}_file_tr() in file_operations callback to have
the ref count and avoid 'trace_event_file' being freed.

  BUG: KASAN: slab-use-after-free in hist_show+0x11e0/0x1278
  Read of size 8 at addr ffff242541e336b8 by task head/190

  CPU: 4 PID: 190 Comm: head Not tainted 6.7.0-rc5-g26aff849438c #133
  Hardware name: linux,dummy-virt (DT)
  Call trace:
   dump_backtrace+0x98/0xf8
   show_stack+0x1c/0x30
   dump_stack_lvl+0x44/0x58
   print_report+0xf0/0x5a0
   kasan_report+0x80/0xc0
   __asan_report_load8_noabort+0x1c/0x28
   hist_show+0x11e0/0x1278
   seq_read_iter+0x344/0xd78
   seq_read+0x128/0x1c0
   vfs_read+0x198/0x6c8
   ksys_read+0xf4/0x1e0
   __arm64_sys_read+0x70/0xa8
   invoke_syscall+0x70/0x260
   el0_svc_common.constprop.0+0xb0/0x280
   do_el0_svc+0x44/0x60
   el0_svc+0x34/0x68
   el0t_64_sync_handler+0xb8/0xc0
   el0t_64_sync+0x168/0x170

  Allocated by task 188:
   kasan_save_stack+0x28/0x50
   kasan_set_track+0x28/0x38
   kasan_save_alloc_info+0x20/0x30
   __kasan_slab_alloc+0x6c/0x80
   kmem_cache_alloc+0x15c/0x4a8
   trace_create_new_event+0x84/0x348
   __trace_add_new_event+0x18/0x88
   event_trace_add_tracer+0xc4/0x1a0
   trace_array_create_dir+0x6c/0x100
   trace_array_create+0x2e8/0x568
   instance_mkdir+0x48/0x80
   tracefs_syscall_mkdir+0x90/0xe8
   vfs_mkdir+0x3c4/0x610
   do_mkdirat+0x144/0x200
   __arm64_sys_mkdirat+0x8c/0xc0
   invoke_syscall+0x70/0x260
   el0_svc_common.constprop.0+0xb0/0x280
   do_el0_svc+0x44/0x60
   el0_svc+0x34/0x68
   el0t_64_sync_handler+0xb8/0xc0
   el0t_64_sync+0x168/0x170

  Freed by task 191:
   kasan_save_stack+0x28/0x50
   kasan_set_track+0x28/0x38
   kasan_save_free_info+0x34/0x58
   __kasan_slab_free+0xe4/0x158
   kmem_cache_free+0x19c/0x508
   event_file_put+0xa0/0x120
   remove_event_file_dir+0x180/0x320
   event_trace_del_tracer+0xb0/0x180
   __remove_instance+0x224/0x508
   instance_rmdir+0x44/0x78
   tracefs_syscall_rmdir+0xbc/0x140
   vfs_rmdir+0x1cc/0x4c8
   do_rmdir+0x220/0x2b8
   __arm64_sys_unlinkat+0xc0/0x100
   invoke_syscall+0x70/0x260
   el0_svc_common.constprop.0+0xb0/0x280
   do_el0_svc+0x44/0x60
   el0_svc+0x34/0x68
   el0t_64_sync_handler+0xb8/0xc0
   el0t_64_sync+0x168/0x170

Link: https://lore.kernel.org/linux-trace-kernel/20231214012153.676155-1-zhengyejian1@huawei.com
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Merge branch 'dpaa2-switch-various-fixes'

Ioana Ciornei says:

====================
dpaa2-switch: various fixes

The first patch fixes the size passed to two dma_unmap_single() calls
which was wrongly put as the size of the pointer.

The second patch is new to this series and reverts the behavior of the
dpaa2-switch driver to not ask for object replay upon offloading so that
we avoid the errors encountered when a VLAN is installed multiple times
on the same port.
====================

Link: https://lore.kernel.org/r/20231212164326.2753457-1-ioana.ciornei@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

dpaa2-switch: do not ask for MDB, VLAN and FDB replay

Starting with commit 4e51bf44a03a ("net: bridge: move the switchdev
object replay helpers to "push" mode") the switchdev_bridge_port_offload()
helper was extended with the intention to provide switchdev drivers easy
access to object addition and deletion replays. This works by calling
the replay helpers with non-NULL notifier blocks.

In the same commit, the dpaa2-switch driver was updated so that it
passes valid notifier blocks to the helper. At that moment, no
regression was identified through testing.

In the meantime, the blamed commit changed the behavior in terms of
which ports get hit by the replay. Before this commit, only the initial
port which identified itself as offloaded through
switchdev_bridge_port_offload() got a replay of all port objects and
FDBs. After this, the newly joining port will trigger a replay of
objects on all bridge ports and on the bridge itself.

This behavior leads to errors in dpaa2_switch_port_vlans_add() when a
VLAN gets installed on the same interface multiple times.

The intended mechanism to address this is to pass a non-NULL ctx to the
switchdev_bridge_port_offload() helper and then check it against the
port's private structure. But since the driver does not have any use for
the replayed port objects and FDBs until it gains support for LAG
offload, it's better to fix the issue by reverting the dpaa2-switch
driver to not ask for replay. The pointers will be added back when we
are prepared to ignore replays on unrelated ports.

Fixes: b28d580e2939 ("net: bridge: switchdev: replay all VLAN groups")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20231212164326.2753457-3-ioana.ciornei@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

dpaa2-switch: fix size of the dma_unmap

The size of the DMA unmap was wrongly put as a sizeof of a pointer.
Change the value of the DMA unmap to be the actual macro used for the
allocation and the DMA map.

Fixes: 1110318d83e8 ("dpaa2-switch: add tc flower hardware offload on ingress traffic")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20231212164326.2753457-2-ioana.ciornei@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: prevent mss overflow in skb_segment()

Once again syzbot is able to crash the kernel in skb_segment() [1]

GSO_BY_FRAGS is a forbidden value, but unfortunately the following
computation in skb_segment() can reach it quite easily :

mss = mss * partial_segs;

65535 = 3 * 5 * 17 * 257, so many initial values of mss can lead to
a bad final result.

Make sure to limit segmentation so that the new mss value is smaller
than GSO_BY_FRAGS.

[1]

general protection fault, probably for non-canonical address 0xdffffc000000000e: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000070-0x0000000000000077]
CPU: 1 PID: 5079 Comm: syz-executor993 Not tainted 6.7.0-rc4-syzkaller-00141-g1ae4cd3cbdd0 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023
RIP: 0010:skb_segment+0x181d/0x3f30 net/core/skbuff.c:4551
Code: 83 e3 02 e9 fb ed ff ff e8 90 68 1c f9 48 8b 84 24 f8 00 00 00 48 8d 78 70 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 8a 21 00 00 48 8b 84 24 f8 00
RSP: 0018:ffffc900043473d0 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 0000000000010046 RCX: ffffffff886b1597
RDX: 000000000000000e RSI: ffffffff886b2520 RDI: 0000000000000070
RBP: ffffc90004347578 R08: 0000000000000005 R09: 000000000000ffff
R10: 000000000000ffff R11: 0000000000000002 R12: ffff888063202ac0
R13: 0000000000010000 R14: 000000000000ffff R15: 0000000000000046
FS: 0000555556e7e380(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020010000 CR3: 0000000027ee2000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
udp6_ufo_fragment+0xa0e/0xd00 net/ipv6/udp_offload.c:109
ipv6_gso_segment+0x534/0x17e0 net/ipv6/ip6_offload.c:120
skb_mac_gso_segment+0x290/0x610 net/core/gso.c:53
__skb_gso_segment+0x339/0x710 net/core/gso.c:124
skb_gso_segment include/net/gso.h:83 [inline]
validate_xmit_skb+0x36c/0xeb0 net/core/dev.c:3626
__dev_queue_xmit+0x6f3/0x3d60 net/core/dev.c:4338
dev_queue_xmit include/linux/netdevice.h:3134 [inline]
packet_xmit+0x257/0x380 net/packet/af_packet.c:276
packet_snd net/packet/af_packet.c:3087 [inline]
packet_sendmsg+0x24c6/0x5220 net/packet/af_packet.c:3119
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0xd5/0x180 net/socket.c:745
__sys_sendto+0x255/0x340 net/socket.c:2190
__do_sys_sendto net/socket.c:2202 [inline]
__se_sys_sendto net/socket.c:2198 [inline]
__x64_sys_sendto+0xe0/0x1b0 net/socket.c:2198
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x40/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
RIP: 0033:0x7f8692032aa9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 d1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fff8d685418 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f8692032aa9
RDX: 0000000000010048 RSI: 00000000200000c0 RDI: 0000000000000003
RBP: 00000000000f4240 R08: 0000000020000540 R09: 0000000000000014
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff8d685480
R13: 0000000000000001 R14: 00007fff8d685480 R15: 0000000000000003
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
RIP: 0010:skb_segment+0x181d/0x3f30 net/core/skbuff.c:4551
Code: 83 e3 02 e9 fb ed ff ff e8 90 68 1c f9 48 8b 84 24 f8 00 00 00 48 8d 78 70 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 8a 21 00 00 48 8b 84 24 f8 00
RSP: 0018:ffffc900043473d0 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 0000000000010046 RCX: ffffffff886b1597
RDX: 000000000000000e RSI: ffffffff886b2520 RDI: 0000000000000070
RBP: ffffc90004347578 R08: 0000000000000005 R09: 000000000000ffff
R10: 000000000000ffff R11: 0000000000000002 R12: ffff888063202ac0
R13: 0000000000010000 R14: 000000000000ffff R15: 0000000000000046
FS: 0000555556e7e380(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020010000 CR3: 0000000027ee2000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400

Fixes: 3953c46c3ac7 ("sk_buff: allow segmenting based on frag sizes")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20231212164621.4131800-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

vsock/virtio: Fix unsigned integer wrap around in virtio_transport_has_space()

We need to do signed arithmetic if we expect condition
`if (bytes < 0)` to be possible

Found by Linux Verification Center (linuxtesting.org) with SVACE

Fixes: 06a8fc78367d ("VSOCK: Introduce virtio_vsock_common.ko")
Signed-off-by: Nikolay Kuratov <kniv@yandex-team.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20231211162317.4116625-1-kniv@yandex-team.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'v6.7-rockchip-clkfixes1' of git://git./linux/kernel/git/mmind/linux-rockchip into clk-fixes

Pull Rockchip clk driver fixes for the merge window from Heiko Stuebner:

Fixes for a wrong clockname, a wrong clock-parent, a wrong clock-gate
and finally one new PLL rate for the rk3568 to fix display artifacts
on a handheld devices based on that soc.

* tag 'v6.7-rockchip-clkfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  clk: rockchip: rk3128: Fix SCLK_SDMMC's clock name
  clk: rockchip: rk3128: Fix aclk_peri_src's parent
  clk: rockchip: rk3128: Fix HCLK_OTG gate register
  clk: rockchip: rk3568: Add PLL rate for 292.5MHz

drm/amdgpu: warn when there are still mappings when a BO is destroyed v2

This can only happen when there is a reference counting bug.

v2: fix typo

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix tear down order in amdgpu_vm_pt_free

When freeing PD/PT with shadows it can happen that the shadow
destruction races with detaching the PD/PT from the VM causing a NULL
pointer dereference in the invalidation code.

Fix this by detaching the the PD/PT from the VM first and then
freeing the shadow instead.

Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: https://gitlab.freedesktop.org/drm/amd/-/issues/2867
Cc: <stable@vger.kernel.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: Fix a probing order problem on SDMA 2.4

commit 751e293f2c99 ("drm/amd: Move microcode init from sw_init to
early_init for SDMA v2.4") made a fateful mistake in
`adev->sdma.num_instances` wasn't declared when sdma_v2_4_init_microcode()
was run. This caused probing to fail.

Move the declaration to right before sdma_v2_4_init_microcode().

Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3043
Fixes: 751e293f2c99 ("drm/amd: Move microcode init from sw_init to early_init for SDMA v2.4")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/sdma5.2: add begin/end_use ring callbacks

Add begin/end_use ring callbacks to disallow GFXOFF when
SDMA work is submitted and allow it again afterward.

This should avoid corner cases where GFXOFF is erroneously
entered when SDMA is still active.  For now just allow/disallow
GFXOFF in the begin and end helpers until we root cause the
issue.  This should not impact power as SDMA usage is pretty
minimal and GFXOSS should not be active when SDMA is active
anyway, this just makes it explicit.

v2: move everything into sdma5.2 code.  No reason for this
to be generic at this point.
v3: Add comments in new code

Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2220
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> (v1)
Tested-by: Mario Limonciello <mario.limonciello@amd.com> (v1)
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.15+

sign-file: Fix incorrect return values check

There are some wrong return values check in sign-file when call OpenSSL
API. The ERR() check cond is wrong because of the program only check the
return value is < 0 which ignored the return val is 0. For example:
1. CMS_final() return 1 for success or 0 for failure.
2. i2d_CMS_bio_stream() returns 1 for success or 0 for failure.
3. i2d_TYPEbio() return 1 for success and 0 for failure.
4. BIO_free() return 1 for success and 0 for failure.

Link: https://www.openssl.org/docs/manmaster/man3/
Fixes: e5a2e3c84782 ("scripts/sign-file.c: Add support for signing with a raw signature")
Signed-off-by: Yusong Gao <a869920004@gmail.com>
Reviewed-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20231213024405.624692-1-a869920004@gmail.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'pull-fixes' of git://git./linux/kernel/git/viro/vfs

Pull ufs fix from Al Viro:
"ufs got broken this merge window on folio conversion - calling
  conventions for filemap_lock_folio() are not the same as for
  find_lock_page()"

* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fix ufs_get_locked_folio() breakage

Revert "tcp: disable tcp_autocorking for socket when TCP_NODELAY flag is set"

This reverts commit f3f32a356c0d2379d4431364e74f101f8f075ce3.

Paolo reports that the change disables autocorking even after
the userspace sets TCP_CORK.

Fixes: f3f32a356c0d ("tcp: disable tcp_autocorking for socket when TCP_NODELAY flag is set")
Link: https://lore.kernel.org/r/0d30d5a41d3ac990573016308aaeacb40a9dc79f.camel@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'efi-urgent-for-v6.7-2' of git://git./linux/kernel/git/efi/efi

Pull EFI fixes from Ard Biesheuvel:

- Deal with a regression in the recently refactored x86 EFI stub code
   on older Dell systems by disabling randomization of the physical load
   address

- Use the correct load address for relocatable Loongarch kernels

* tag 'efi-urgent-for-v6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  efi/x86: Avoid physical KASLR on older Dell systems
  efi/loongarch: Use load address to calculate kernel entry address

drm/panel: ltk050h3146w: Set burst mode for ltk050h3148w

The ltk050h3148w variant expects the horizontal component lane byte clock
cycle(lbcc) to be calculated using lane_mbps (burst mode) instead of the
pixel clock.
Using the pixel clock rate by default for this calculation was introduced
in commit ac87d23694f4 ("drm/bridge: synopsys: dw-mipi-dsi: Use pixel clock
rate to calculate lbcc") and starting from commit 93e82bb4de01
("drm/bridge: synopsys: dw-mipi-dsi: Fix hcomponent lbcc for burst mode")
only panels that support burst mode can keep using the lane_mbps. So add
MIPI_DSI_MODE_VIDEO_BURST as part of the mode_flags for the dsi host.

Fixes: 93e82bb4de01 ("drm/bridge: synopsys: dw-mipi-dsi: Fix hcomponent lbcc for burst mode")
Signed-off-by: Farouk Bouabid <farouk.bouabid@theobroma-systems.com>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231213145045.41020-1-farouk.bouabid@theobroma-systems.com

fix ufs_get_locked_folio() breakage

filemap_lock_folio() returns ERR_PTR(-ENOENT) if the thing is not
in cache - not NULL like find_lock_page() used to.

Fixes: 5fb7bd50b351 "ufs: add ufs_get_locked_folio and ufs_put_locked_folio"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

io_uring/poll: don't enable lazy wake for POLLEXCLUSIVE

There are a few quirks around using lazy wake for poll unconditionally,
and one of them is related the EPOLLEXCLUSIVE. Those may trigger
exclusive wakeups, which wake a limited number of entries in the wait
queue. If that wake number is less than the number of entries someone is
waiting for (and that someone is also using DEFER_TASKRUN), then we can
get stuck waiting for more entries while we should be processing the ones
we already got.

If we're doing exclusive poll waits, flag the request as not being
compatible with lazy wakeups.

Reported-by: Pavel Begunkov <asml.silence@gmail.com>
Fixes: 6ce4a93dbb5b ("io_uring/poll: use IOU_F_TWQ_LAZY_WAKE for wakeups")
Signed-off-by: Jens Axboe <axboe@kernel.dk>

MAINTAINERS: powerpc: Add Aneesh & Naveen

Aneesh and Naveen are helping out with some aspects of upstream
maintenance, add them as reviewers.

Acked-by: "Aneesh Kumar K.V (IBM)" <aneesh.kumar@kernel.org>
Acked-by: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231205051105.736470-1-mpe@ellerman.id.au

powerpc/pseries/vas: Migration suspend waits for no in-progress open windows

The hypervisor returns migration failure if all VAS windows are not
closed. During pre-migration stage, vas_migration_handler() sets
migration_in_progress flag and closes all windows from the list.
The allocate VAS window routine checks the migration flag, setup
the window and then add it to the list. So there is possibility of
the migration handler missing the window that is still in the
process of setup.

t1: Allocate and open VAS t2: Migration event
    window

lock vas_pseries_mutex
If migration_in_progress set
  unlock vas_pseries_mutex
  return
open window HCALL
unlock vas_pseries_mutex
Modify window HCALL lock vas_pseries_mutex
setup window migration_in_progress=true
Closes all windows from the list
// May miss windows that are
// not in the list
unlock vas_pseries_mutex
lock vas_pseries_mutex return
if nr_closed_windows == 0
  // No DLPAR CPU or migration
  add window to the list
  // Window will be added to the
  // list after the setup is completed
  unlock vas_pseries_mutex
  return
unlock vas_pseries_mutex
Close VAS window
// due to DLPAR CPU or migration
return -EBUSY

This patch resolves the issue with the following steps:
- Set the migration_in_progress flag without holding mutex.
- Introduce nr_open_wins_progress counter in VAS capabilities
  struct
- This counter tracks the number of open windows are still in
  progress
- The allocate setup window thread closes windows if the migration
  is set and decrements nr_open_window_progress counter
- The migration handler waits for no in-progress open windows.

The code flow with the fix is as follows:

t1: Allocate and open VAS       t2: Migration event
    window

lock vas_pseries_mutex
If migration_in_progress set
   unlock vas_pseries_mutex
   return
open window HCALL
nr_open_wins_progress++
// Window opened, but not
// added to the list yet
unlock vas_pseries_mutex
Modify window HCALL migration_in_progress=true
setup window lock vas_pseries_mutex
Closes all windows from the list
While nr_open_wins_progress {
    unlock vas_pseries_mutex
lock vas_pseries_mutex     sleep
if nr_closed_windows == 0     // Wait if any open window in
or migration is not started     // progress. The open window
   // No DLPAR CPU or migration     // thread closes the window without
   add window to the list     // adding to the list and return if
   nr_open_wins_progress--     // the migration is in progress.
   unlock vas_pseries_mutex
   return
Close VAS window
nr_open_wins_progress--
unlock vas_pseries_mutex
return -EBUSY     lock vas_pseries_mutex
}
unlock vas_pseries_mutex
return

Fixes: 37e6764895ef ("powerpc/pseries/vas: Add VAS migration handler")
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231125235104.3405008-1-haren@linux.ibm.com

Merge branch 'stmmac-bug-fixes'

Yanteng Si says:

====================
stmmac: Some bug fixes

* Put Krzysztof's patch into my thread, pick Conor's Reviewed-by
  tag and Jiaxun's Acked-by tag.(prev version is RFC patch)

* I fixed an Oops related to mdio, mainly to ensure that
  mdio is initialized before use, because it will be used
  in a series of patches I am working on.

see <https://lore.kernel.org/loongarch/cover.1699533745.git.siyanteng@loongson.cn/T/#t>
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

MIPS: dts: loongson: drop incorrect dwmac fallback compatible

Device binds to proper PCI ID (LOONGSON, 0x7a03), already listed in DTS,
so checking for some other compatible does not make sense. It cannot be
bound to unsupported platform.

Drop useless, incorrect (space in between) and undocumented compatible.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

stmmac: dwmac-loongson: drop useless check for compatible fallback

Device binds to proper PCI ID (LOONGSON, 0x7a03), already listed in DTS,
so checking for some other compatible does not make sense. It cannot be
bound to unsupported platform.

Drop useless, incorrect (space in between) and undocumented compatible.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

stmmac: dwmac-loongson: Make sure MDIO is initialized before use

Generic code will use mdio. If it is not initialized before use,
the kernel will Oops.

Fixes: 30bba69d7db4 ("stmmac: pci: Add dwmac support for Loongson")
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

dt-bindings: panel-simple-dsi: move LG 5" HD TFT LCD panel into DSI yaml

Originally was in the panel-simple, but belongs to panel-simple-dsi.

See arch/arm/boot/dts/nvidia/tegra114-roth.dts for more details.

Resolves the following warning:
```
arch/arm/boot/dts/tegra114-roth.dt.yaml: panel@0: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/display/panel/panel-simple.yaml
```

Fixes: 310abcea76e9 ("dt-bindings: display: convert simple lg panels to DT Schema")
Signed-off-by: David Heidelberg <david@ixit.cz>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Link: https://lore.kernel.org/r/20231212200934.99262-1-david@ixit.cz
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231212200934.99262-1-david@ixit.cz

tcp: disable tcp_autocorking for socket when TCP_NODELAY flag is set

Based on the tcp man page, if TCP_NODELAY is set, it disables Nagle's algorithm
and packets are sent as soon as possible. However in the `tcp_push` function
where autocorking is evaluated the `nonagle` value set by TCP_NODELAY is not
considered which can trigger unexpected corking of packets and induce delays.

For example, if two packets are generated as part of a server's reply, if the
first one is not transmitted on the wire quickly enough, the second packet can
trigger the autocorking in `tcp_push` and be delayed instead of sent as soon as
possible. It will either wait for additional packets to be coalesced or an ACK
from the client before transmitting the corked packet. This can interact badly
if the receiver has tcp delayed acks enabled, introducing 40ms extra delay in
completion times. It is not always possible to control who has delayed acks
set, but it is possible to adjust when and how autocorking is triggered.
Patch prevents autocorking if the TCP_NODELAY flag is set on the socket.

Patch has been tested using an AWS c7g.2xlarge instance with Ubuntu 22.04 and
Apache Tomcat 9.0.83 running the basic servlet below:

import java.io.IOException;
import java.io.OutputStreamWriter;
import java.io.PrintWriter;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServlet;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;

public class HelloWorldServlet extends HttpServlet {
    @Override
    protected void doGet(HttpServletRequest request, HttpServletResponse response)
      throws ServletException, IOException {
        response.setContentType("text/html;charset=utf-8");
        OutputStreamWriter osw = new OutputStreamWriter(response.getOutputStream(),"UTF-8");
        String s = "a".repeat(3096);
        osw.write(s,0,s.length());
        osw.flush();
    }
}

Load was applied using  wrk2 (https://github.com/kinvolk/wrk2) from an AWS
c6i.8xlarge instance.  With the current auto-corking behavior and TCP_NODELAY
set an additional 40ms latency from P99.99+ values are observed.  With the
patch applied we see no occurrences of 40ms latencies. The patch has also been
tested with iperf and uperf benchmarks and no regression was observed.

# No patch with tcp_autocorking=1 and TCP_NODELAY set on all sockets
./wrk -t32 -c128 -d40s --latency -R10000  http://172.31.49.177:8080/hello/hello'
  ...
50.000%    0.91ms
75.000%    1.12ms
90.000%    1.46ms
99.000%    1.73ms
99.900%    1.96ms
99.990%   43.62ms   <<< 40+ ms extra latency
99.999%   48.32ms
100.000%   49.34ms

# With patch
./wrk -t32 -c128 -d40s --latency -R10000  http://172.31.49.177:8080/hello/hello'
  ...
50.000%    0.89ms
75.000%    1.13ms
90.000%    1.44ms
99.000%    1.67ms
99.900%    1.78ms
99.990%    2.27ms   <<< no 40+ ms extra latency
99.999%    3.71ms
100.000%    4.57ms

Fixes: f54b311142a9 ("tcp: auto corking")
Signed-off-by: Salvatore Dipietro <dipiets@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'mediatek-drm-fixes-20231211' of https://git./linux/kernel/git/chunkuang.hu/linux into drm-fixes

Mediatek DRM Fixes - 20231211

1. mtk_disp_gamma: Fix breakage due to merge issue
2. fix kernel oops if no crtc is found
3. Add spinlock for setting vblank event in atomic_begin
4. Fix access violation in mtk_drm_crtc_dma_dev_get

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231211151510.6749-1-chunkuang.hu@kernel.org

tracing: Add size check when printing trace_marker output

If for some reason the trace_marker write does not have a nul byte for the
string, it will overflow the print:

  trace_seq_printf(s, ": %s", field->buf);

The field->buf could be missing the nul byte. To prevent overflow, add the
max size that the buf can be by using the event size and the field
location.

  int max = iter->ent_size - offsetof(struct print_entry, buf);

  trace_seq_printf(s, ": %*.s", max, field->buf);

Link: https://lore.kernel.org/linux-trace-kernel/20231212084444.4619b8ce@gandalf.local.home
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

ring-buffer: Have saved event hold the entire event

For the ring buffer iterator (non-consuming read), the event needs to be
copied into the iterator buffer to make sure that a writer does not
overwrite it while the user is reading it. If a write happens during the
copy, the buffer is simply discarded.

But the temp buffer itself was not big enough. The allocation of the
buffer was only BUF_MAX_DATA_SIZE, which is the maximum data size that can
be passed into the ring buffer and saved. But the temp buffer needs to
hold the meta data as well. That would be BUF_PAGE_SIZE and not
BUF_MAX_DATA_SIZE.

Link: https://lore.kernel.org/linux-trace-kernel/20231212072558.61f76493@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 785888c544e04 ("ring-buffer: Have rb_iter_head_event() handle concurrent writer")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

ring-buffer: Do not update before stamp when switching sub-buffers

The ring buffer timestamps are synchronized by two timestamp placeholders.
One is the "before_stamp" and the other is the "write_stamp" (sometimes
referred to as the "after stamp" but only in the comments. These two
stamps are key to knowing how to handle nested events coming in with a
lockless system.

When moving across sub-buffers, the before stamp is updated but the write
stamp is not. There's an effort to put back the before stamp to something
that seems logical in case there's nested events. But as the current event
is about to cross sub-buffers, and so will any new nested event that happens,
updating the before stamp is useless, and could even introduce new race
conditions.

The first event on a sub-buffer simply uses the sub-buffer's timestamp
and keeps a "delta" of zero. The "before_stamp" and "write_stamp" are not
used in the algorithm in this case. There's no reason to try to fix the
before_stamp when this happens.

As a bonus, it removes a cmpxchg() when crossing sub-buffers!

Link: https://lore.kernel.org/linux-trace-kernel/20231211114420.36dde01b@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: a389d86f7fd09 ("ring-buffer: Have nested events still record running time stamp")
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

mm/mglru: reclaim offlined memcgs harder

In the effort to reduce zombie memcgs [1], it was discovered that the
memcg LRU doesn't apply enough pressure on offlined memcgs.  Specifically,
instead of rotating them to the tail of the current generation
(MEMCG_LRU_TAIL) for a second attempt, it moves them to the next
generation (MEMCG_LRU_YOUNG) after the first attempt.

Not applying enough pressure on offlined memcgs can cause them to build
up, and this can be particularly harmful to memory-constrained systems.

On Pixel 8 Pro, launching apps for 50 cycles:
                 Before  After  Change
  Zombie memcgs  45      35     -22%

[1] https://lore.kernel.org/CABdmKX2M6koq4Q0Cmp_-=wbP0Qa190HdEGGaHfxNS05gAkUtPA@mail.gmail.com/

Link: https://lkml.kernel.org/r/20231208061407.2125867-4-yuzhao@google.com
Fixes: e4dde56cd208 ("mm: multi-gen LRU: per-node lru_gen_folio lists")
Signed-off-by: Yu Zhao <yuzhao@google.com>
Reported-by: T.J. Mercier <tjmercier@google.com>
Tested-by: T.J. Mercier <tjmercier@google.com>
Cc: Charan Teja Kalla <quic_charante@quicinc.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/mglru: respect min_ttl_ms with memcgs

While investigating kswapd "consuming 100% CPU" [1] (also see "mm/mglru:
try to stop at high watermarks"), it was discovered that the memcg LRU can
breach the thrashing protection imposed by min_ttl_ms.

Before the memcg LRU:
  kswapd()
    shrink_node_memcgs()
      mem_cgroup_iter()
        inc_max_seq()  // always hit a different memcg
    lru_gen_age_node()
      mem_cgroup_iter()
        check the timestamp of the oldest generation

After the memcg LRU:
  kswapd()
    shrink_many()
      restart:
        iterate the memcg LRU:
          inc_max_seq()  // occasionally hit the same memcg
          if raced with lru_gen_rotate_memcg():
            goto restart
    lru_gen_age_node()
      mem_cgroup_iter()
        check the timestamp of the oldest generation

Specifically, when the restart happens in shrink_many(), it needs to stick
with the (memcg LRU) generation it began with.  In other words, it should
neither re-read memcg_lru->seq nor age an lruvec of a different
generation.  Otherwise it can hit the same memcg multiple times without
giving lru_gen_age_node() a chance to check the timestamp of that memcg's
oldest generation (against min_ttl_ms).

[1] https://lore.kernel.org/CAK8fFZ4DY+GtBA40Pm7Nn5xCHy+51w3sfxPqkqpqakSXYyX+Wg@mail.gmail.com/

Link: https://lkml.kernel.org/r/20231208061407.2125867-3-yuzhao@google.com
Fixes: e4dde56cd208 ("mm: multi-gen LRU: per-node lru_gen_folio lists")
Signed-off-by: Yu Zhao <yuzhao@google.com>
Tested-by: T.J. Mercier <tjmercier@google.com>
Cc: Charan Teja Kalla <quic_charante@quicinc.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/mglru: try to stop at high watermarks

The initial MGLRU patchset didn't include the memcg LRU support, and it
relied on should_abort_scan(), added by commit f76c83378851 ("mm:
multi-gen LRU: optimize multiple memcgs"), to "backoff to avoid
overshooting their aggregate reclaim target by too much".

Later on when the memcg LRU was added, should_abort_scan() was deemed
unnecessary, and the test results [1] showed no side effects after it was
removed by commit a579086c99ed ("mm: multi-gen LRU: remove eviction
fairness safeguard").

However, that test used memory.reclaim, which sets nr_to_reclaim to
SWAP_CLUSTER_MAX.  So it can overshoot only by SWAP_CLUSTER_MAX-1 pages,
i.e., from nr_reclaimed=nr_to_reclaim-1 to
nr_reclaimed=nr_to_reclaim+SWAP_CLUSTER_MAX-1.  Compared with the batch
size kswapd sets to nr_to_reclaim, SWAP_CLUSTER_MAX is tiny.  Therefore
that test isn't able to reproduce the worst case scenario, i.e., kswapd
overshooting GBs on large systems and "consuming 100% CPU" (see the Closes
tag).

Bring back a simplified version of should_abort_scan() on top of the memcg
LRU, so that kswapd stops when all eligible zones are above their
respective high watermarks plus a small delta to lower the chance of
KSWAPD_HIGH_WMARK_HIT_QUICKLY.  Note that this only applies to order-0
reclaim, meaning compaction-induced reclaim can still run wild (which is a
different problem).

On Android, launching 55 apps sequentially:
           Before     After      Change
  pgpgin   838377172  802955040  -4%
  pgpgout  38037080   34336300   -10%

[1] https://lore.kernel.org/20221222041905.2431096-1-yuzhao@google.com/

Link: https://lkml.kernel.org/r/20231208061407.2125867-2-yuzhao@google.com
Fixes: a579086c99ed ("mm: multi-gen LRU: remove eviction fairness safeguard")
Signed-off-by: Yu Zhao <yuzhao@google.com>
Reported-by: Charan Teja Kalla <quic_charante@quicinc.com>
Reported-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com>
Closes: https://lore.kernel.org/CAK8fFZ4DY+GtBA40Pm7Nn5xCHy+51w3sfxPqkqpqakSXYyX+Wg@mail.gmail.com/
Tested-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com>
Tested-by: Kalesh Singh <kaleshsingh@google.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: T.J. Mercier <tjmercier@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/mglru: fix underprotected page cache

Unmapped folios accessed through file descriptors can be underprotected.
Those folios are added to the oldest generation based on:

1. The fact that they are less costly to reclaim (no need to walk the
   rmap and flush the TLB) and have less impact on performance (don't
   cause major PFs and can be non-blocking if needed again).
2. The observation that they are likely to be single-use. E.g., for
   client use cases like Android, its apps parse configuration files
   and store the data in heap (anon); for server use cases like MySQL,
   it reads from InnoDB files and holds the cached data for tables in
   buffer pools (anon).

However, the oldest generation can be very short lived, and if so, it
doesn't provide the PID controller with enough time to respond to a surge
of refaults.  (Note that the PID controller uses weighted refaults and
those from evicted generations only take a half of the whole weight.) In
other words, for a short lived generation, the moving average smooths out
the spike quickly.

To fix the problem:
1. For folios that are already on LRU, if they can be beyond the
   tracking range of tiers, i.e., five accesses through file
   descriptors, move them to the second oldest generation to give them
   more time to age. (Note that tiers are used by the PID controller
   to statistically determine whether folios accessed multiple times
   through file descriptors are worth protecting.)
2. When adding unmapped folios to LRU, adjust the placement of them so
   that they are not too close to the tail. The effect of this is
   similar to the above.

On Android, launching 55 apps sequentially:
                           Before     After      Change
  workingset_refault_anon  25641024   25598972   0%
  workingset_refault_file  115016834  106178438  -8%

Link: https://lkml.kernel.org/r/20231208061407.2125867-1-yuzhao@google.com
Fixes: ac35a4902374 ("mm: multi-gen LRU: minimal implementation")
Signed-off-by: Yu Zhao <yuzhao@google.com>
Reported-by: Charan Teja Kalla <quic_charante@quicinc.com>
Tested-by: Kalesh Singh <kaleshsingh@google.com>
Cc: T.J. Mercier <tjmercier@google.com>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/shmem: fix race in shmem_undo_range w/THP

Split folios during the second loop of shmem_undo_range. It's not
sufficient to only split folios when dealing with partial pages, since
it's possible for a THP to be faulted in after that point. Calling
truncate_inode_folio in that situation can result in throwing away data
outside of the range being targeted.

[akpm@linux-foundation.org: tidy up comment layout]
Link: https://lkml.kernel.org/r/20230418084031.3439795-1-stevensd@google.com
Fixes: b9a8a4195c7d ("truncate,shmem: Handle truncates that split large folios")
Signed-off-by: David Stevens <stevensd@chromium.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Revert "selftests: error out if kernel header files are not yet built"

This reverts commit 9fc96c7c19df ("selftests: error out if kernel header
files are not yet built").

It turns out that requiring the kernel headers to be built as a
prerequisite to building selftests, does not work in many cases. For
example, Peter Zijlstra writes:

"My biggest beef with the whole thing is that I simply do not want to use
'make headers', it doesn't work for me.

I have a ton of output directories and I don't care to build tools into
the output dirs, in fact some of them flat out refuse to work that way
(bpf comes to mind)." [1]

Therefore, stop erroring out on the selftests build. Additional patches
will be required in order to change over to not requiring the kernel
headers.

[1] https://lore.kernel.org/20231208221007.GO28727@noisy.programming.kicks-ass.net

Link: https://lkml.kernel.org/r/20231209020144.244759-1-jhubbard@nvidia.com
Fixes: 9fc96c7c19df ("selftests: error out if kernel header files are not yet built")
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Cc: Anders Roxell <anders.roxell@linaro.org>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Marcos Paulo de Souza <mpdesouza@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

crash_core: fix the check for whether crashkernel is from high memory

If crash_base is equal to CRASH_ADDR_LOW_MAX, it also indicates that
the crashkernel memory is allocated from high memory. However, the
current check only considers the case where crash_base is greater than
CRASH_ADDR_LOW_MAX. Fix it.

The runtime effects is that crashkernel high memory is successfully
reserved, whereas the crashkernel low memory is bypassed in this case,
then kdump kernel bootup will fail because of no low memory under 4G.

This patch also includes some minor cleanups.

Link: https://lkml.kernel.org/r/20231209141438.77233-1-ytcoode@gmail.com
Fixes: 0ab97169aa05 ("crash_core: add generic function to do reservation")
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

x86, kexec: fix the wrong ifdeffery CONFIG_KEXEC

With the current ifdeffery CONFIG_KEXEC, get_cmdline_acpi_rsdp() is only
available when kexec_load interface is taken, while kexec_file_load
interface can't make use of it.

Now change it to CONFIG_KEXEC_CORE.

Link: https://lkml.kernel.org/r/20231208073036.7884-6-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Eric DeVolder <eric_devolder@yahoo.com>
Cc: Ignat Korchagin <ignat@cloudflare.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

sh, kexec: fix the incorrect ifdeffery and dependency of CONFIG_KEXEC

The select of KEXEC for CRASH_DUMP in kernel/Kconfig.kexec will be
dropped, then compiling errors will be triggered if below config
items are set:

===
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_CRASH_DUMP=y
===

Here, change the dependency of building kexec_core related object files,
and the ifdeffery on SuperH from CONFIG_KEXEC to CONFIG_KEXEC_CORE.

Link: https://lkml.kernel.org/r/20231208073036.7884-5-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Eric DeVolder <eric_devolder@yahoo.com>
Cc: Ignat Korchagin <ignat@cloudflare.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mips, kexec: fix the incorrect ifdeffery and dependency of CONFIG_KEXEC

The select of KEXEC for CRASH_DUMP in kernel/Kconfig.kexec will be
dropped, then compiling errors will be triggered if below config items are
set:

===
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_CRASH_DUMP=y
===

--------------------------------------------------------------------
mipsel-linux-ld: kernel/kexec_core.o: in function `kimage_free':
kernel/kexec_core.c:(.text+0x2200): undefined reference to `machine_kexec_cleanup'
mipsel-linux-ld: kernel/kexec_core.o: in function `__crash_kexec':
kernel/kexec_core.c:(.text+0x2480): undefined reference to `machine_crash_shutdown'
mipsel-linux-ld: kernel/kexec_core.c:(.text+0x2488): undefined reference to `machine_kexec'
mipsel-linux-ld: kernel/kexec_core.o: in function `kernel_kexec':
kernel/kexec_core.c:(.text+0x29b8): undefined reference to `machine_shutdown'
mipsel-linux-ld: kernel/kexec_core.c:(.text+0x29c0): undefined reference to `machine_kexec'
--------------------------------------------------------------------

Here, change the dependency of building kexec_core related object files,
and the ifdeffery in mips from CONFIG_KEXEC to CONFIG_KEXEC_CORE.

Link: https://lkml.kernel.org/r/20231208073036.7884-4-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311302042.sn8cDPIX-lkp@intel.com/
Cc: Eric DeVolder <eric_devolder@yahoo.com>
Cc: Ignat Korchagin <ignat@cloudflare.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

m68k, kexec: fix the incorrect ifdeffery and build dependency of CONFIG_KEXEC

The select of KEXEC for CRASH_DUMP in kernel/Kconfig.kexec will be
dropped, then compiling errors will be triggered if below config items are
set:

===
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_CRASH_DUMP=y
===

Here, change the dependency of buinding machine_kexec.o relocate_kernel.o
and the ifdeffery in asm/kexe.h to CONFIG_KEXEC_CORE.

Link: https://lkml.kernel.org/r/20231208073036.7884-3-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Eric DeVolder <eric_devolder@yahoo.com>
Cc: Ignat Korchagin <ignat@cloudflare.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

loongarch, kexec: change dependency of object files

Patch series "kexec: fix the incorrect ifdeffery and dependency of
CONFIG_KEXEC".

The select of KEXEC for CRASH_DUMP in kernel/Kconfig.kexec will be
dropped, then compiling errors will be triggered if below config items are
set:

===
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_CRASH_DUMP=y
===

E.g on mips, below link error are seen:
--------------------------------------------------------------------
mipsel-linux-ld: kernel/kexec_core.o: in function `kimage_free':
kernel/kexec_core.c:(.text+0x2200): undefined reference to `machine_kexec_cleanup'
mipsel-linux-ld: kernel/kexec_core.o: in function `__crash_kexec':
kernel/kexec_core.c:(.text+0x2480): undefined reference to `machine_crash_shutdown'
mipsel-linux-ld: kernel/kexec_core.c:(.text+0x2488): undefined reference to `machine_kexec'
mipsel-linux-ld: kernel/kexec_core.o: in function `kernel_kexec':
kernel/kexec_core.c:(.text+0x29b8): undefined reference to `machine_shutdown'
mipsel-linux-ld: kernel/kexec_core.c:(.text+0x29c0): undefined reference to `machine_kexec'
--------------------------------------------------------------------

Here, change the incorrect dependency of building kexec_core related
object files, and the ifdeffery on architectures from CONFIG_KEXEC to
CONFIG_KEXEC_CORE.

Testing:
========
Passed on mips and loognarch with the LKP reproducer.

This patch (of 5):

Currently, in arch/loongarch/kernel/Makefile, building machine_kexec.o
relocate_kernel.o depends on CONFIG_KEXEC.

Whereas, since we will drop the select of KEXEC for CRASH_DUMP in
kernel/Kconfig.kexec, compiling error will be triggered if below config
items are set:

===
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_CRASH_DUMP=y
===

---------------------------------------------------------------
loongarch64-linux-ld: kernel/kexec_core.o: in function `.L209':
>> kexec_core.c:(.text+0x1660): undefined reference to `machine_kexec_cleanup'
   loongarch64-linux-ld: kernel/kexec_core.o: in function `.L287':
>> kexec_core.c:(.text+0x1c5c): undefined reference to `machine_crash_shutdown'
>> loongarch64-linux-ld: kexec_core.c:(.text+0x1c64): undefined reference to `machine_kexec'
   loongarch64-linux-ld: kernel/kexec_core.o: in function `.L2^B5':
>> kexec_core.c:(.text+0x2090): undefined reference to `machine_shutdown'
   loongarch64-linux-ld: kexec_core.c:(.text+0x20a0): undefined reference to `machine_kexec'
---------------------------------------------------------------

Here, change the dependency of machine_kexec.o relocate_kernel.o to
CONFIG_KEXEC_CORE can fix above building error.

Link: https://lkml.kernel.org/r/20231208073036.7884-1-bhe@redhat.com
Link: https://lkml.kernel.org/r/20231208073036.7884-2-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311300946.kHE9Iu71-lkp@intel.com/
Cc: Eric DeVolder <eric_devolder@yahoo.com>
Cc: Ignat Korchagin <ignat@cloudflare.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/damon/core: make damon_start() waits until kdamond_fn() starts

The cleanup tasks of kdamond threads including reset of corresponding
DAMON context's ->kdamond field and decrease of global nr_running_ctxs
counter is supposed to be executed by kdamond_fn(). However, commit
0f91d13366a4 ("mm/damon: simplify stop mechanism") made neither
damon_start() nor damon_stop() ensure the corresponding kdamond has
started the execution of kdamond_fn().

As a result, the cleanup can be skipped if damon_stop() is called fast
enough after the previous damon_start(). Especially the skipped reset
of ->kdamond could cause a use-after-free.

Fix it by waiting for start of kdamond_fn() execution from
damon_start().

Link: https://lkml.kernel.org/r/20231208175018.63880-1-sj@kernel.org
Fixes: 0f91d13366a4 ("mm/damon: simplify stop mechanism")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reported-by: Jakub Acs <acsjakub@amazon.de>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Jakub Acs <acsjakub@amazon.de>
Cc: <stable@vger.kernel.org> # 5.15.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: cow: print ksft header before printing anything else

Doing a ksft_print_msg() before the ksft_print_header() seems to confuse
the ksft framework in a strange way: running the test on the cmdline
results in the expected output.

But piping the output somewhere else, results in some odd output,
whereby we repeatedly get the same info printed:
# [INFO] detected THP size: 2048 KiB
# [INFO] detected hugetlb page size: 2048 KiB
# [INFO] detected hugetlb page size: 1048576 KiB
# [INFO] huge zeropage is enabled
TAP version 13
1..190
# [INFO] Anonymous memory tests in private mappings
# [RUN] Basic COW after fork() ... with base page
# [INFO] detected THP size: 2048 KiB
# [INFO] detected hugetlb page size: 2048 KiB
# [INFO] detected hugetlb page size: 1048576 KiB
# [INFO] huge zeropage is enabled
TAP version 13
1..190
# [INFO] Anonymous memory tests in private mappings
# [RUN] Basic COW after fork() ... with base page
ok 1 No leak from parent into child
# [RUN] Basic COW after fork() ... with swapped out base page
# [INFO] detected THP size: 2048 KiB
# [INFO] detected hugetlb page size: 2048 KiB
# [INFO] detected hugetlb page size: 1048576 KiB
# [INFO] huge zeropage is enabled

Doing the ksft_print_header() first seems to resolve that and gives us
the output we expect:
TAP version 13
# [INFO] detected THP size: 2048 KiB
# [INFO] detected hugetlb page size: 2048 KiB
# [INFO] detected hugetlb page size: 1048576 KiB
# [INFO] huge zeropage is enabled
1..190
# [INFO] Anonymous memory tests in private mappings
# [RUN] Basic COW after fork() ... with base page
ok 1 No leak from parent into child
# [RUN] Basic COW after fork() ... with swapped out base page
ok 2 No leak from parent into child
# [RUN] Basic COW after fork() ... with THP
ok 3 No leak from parent into child
# [RUN] Basic COW after fork() ... with swapped-out THP
ok 4 No leak from parent into child
# [RUN] Basic COW after fork() ... with PTE-mapped THP
ok 5 No leak from parent into child

Link: https://lkml.kernel.org/r/20231206103558.38040-1-david@redhat.com
Fixes: f4b5fd6946e2 ("selftests/vm: anon_cow: THP tests")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Nico Pache <npache@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: fix VMA heap bounds checking

After converting selinux to VMA heap check helper, the gcl triggers an
execheap SELinux denial, which is caused by a changed logic check.

Previously selinux only checked that the VMA range was within the VMA heap
range, and the implementation checks the intersection between the two
ranges, but the corner case (vm_end=start_brk, brk=vm_start) isn't handled
correctly.

Since commit 11250fd12eb8 ("mm: factor out VMA stack and heap checks") was
only a function extraction, it seems that the issue was introduced by
commit 0db0c01b53a1 ("procfs: fix /proc/<pid>/maps heap check"). Let's
fix above corner cases, meanwhile, correct the wrong indentation of the
stack and heap check helpers.

Fixes: 11250fd12eb8 ("mm: factor out VMA stack and heap checks")
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reported-by: Ondrej Mosnacek <omosnace@redhat.com>
Closes: https://lore.kernel.org/selinux/CAFqZXNv0SVT0fkOK6neP9AXbj3nxJ61JAY4+zJzvxqJaeuhbFw@mail.gmail.com/
Tested-by: Ondrej Mosnacek <omosnace@redhat.com>
Link: https://lkml.kernel.org/r/20231207152525.2607420-1-wangkefeng.wang@huawei.com
Cc: David Hildenbrand <david@redhat.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

riscv: fix VMALLOC_START definition

When below config items are set, compiler complained:

--------------------
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_CRASH_DUMP=y
......
-----------------------

-------------------------------------------------------------------
arch/riscv/kernel/crash_core.c: In function 'arch_crash_save_vmcoreinfo':
arch/riscv/kernel/crash_core.c:11:58: warning: format '%lx' expects argument of type 'long unsigned int', but argument 2 has type 'int' [-Wformat=]
11 |         vmcoreinfo_append_str("NUMBER(VMALLOC_START)=0x%lx\n", VMALLOC_START);
   |                                                        ~~^
   |                                                          |
   |                                                          long unsigned int
   |                                                        %x
----------------------------------------------------------------------

This is because on riscv macro VMALLOC_START has different type when
CONFIG_MMU is set or unset.

arch/riscv/include/asm/pgtable.h:
--------------------------------------------------

Changing it to _AC(0, UL) in case CONFIG_MMU=n can fix the warning.

Link: https://lkml.kernel.org/r/ZW7OsX4zQRA3mO4+@MiWiFi-R3L-srv
Signed-off-by: Baoquan He <bhe@redhat.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Cc: Eric DeVolder <eric_devolder@yahoo.com>
Cc: Ignat Korchagin <ignat@cloudflare.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

kexec: drop dependency on ARCH_SUPPORTS_KEXEC from CRASH_DUMP

In commit f8ff23429c62 ("kernel/Kconfig.kexec: drop select of KEXEC for
CRASH_DUMP") we tried to fix a config regression, where CONFIG_CRASH_DUMP
required CONFIG_KEXEC.

However, it was not enough at least for arm64 platforms.  While further
testing the patch with our arm64 config I noticed that CONFIG_CRASH_DUMP
is unavailable in menuconfig.  This is because CONFIG_CRASH_DUMP still
depends on the new CONFIG_ARCH_SUPPORTS_KEXEC introduced in commit
91506f7e5d21 ("arm64/kexec: refactor for kernel/Kconfig.kexec") and on
arm64 CONFIG_ARCH_SUPPORTS_KEXEC requires CONFIG_PM_SLEEP_SMP=y, which in
turn requires either CONFIG_SUSPEND=y or CONFIG_HIBERNATION=y neither of
which are set in our config.

Given that we already established that CONFIG_KEXEC (which is a switch for
kexec system call itself) is not required for CONFIG_CRASH_DUMP drop
CONFIG_ARCH_SUPPORTS_KEXEC dependency as well.  The arm64 kernel builds
just fine with CONFIG_CRASH_DUMP=y and with both CONFIG_KEXEC=n and
CONFIG_KEXEC_FILE=n after f8ff23429c62 ("kernel/Kconfig.kexec: drop select
of KEXEC for CRASH_DUMP") and this patch are applied given that the
necessary shared bits are included via CONFIG_KEXEC_CORE dependency.

[bhe@redhat.com: don't export some symbols when CONFIG_MMU=n]
Link: https://lkml.kernel.org/r/ZW03ODUKGGhP1ZGU@MiWiFi-R3L-srv
[bhe@redhat.com: riscv, kexec: fix dependency of two items]
Link: https://lkml.kernel.org/r/ZW04G/SKnhbE5mnX@MiWiFi-R3L-srv
Link: https://lkml.kernel.org/r/20231129220409.55006-1-ignat@cloudflare.com
Fixes: 91506f7e5d21 ("arm64/kexec: refactor for kernel/Kconfig.kexec")
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: <stable@vger.kernel.org> # 6.6+: f8ff234: kernel/Kconfig.kexec: drop select of KEXEC for CRASH_DUMP
Cc: <stable@vger.kernel.org> # 6.6+
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Merge tag 'hid-for-linus-2023121201' of git://git./linux/kernel/git/hid/hid

Pull HID fixes from Jiri Kosina:

- Lenovo ThinkPad TrackPoint Keyboard II firmware-specific regression
   fix (Mikhail Khvainitski)

- device-specific fixes (various authors)

* tag 'hid-for-linus-2023121201' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: apple: Add "hfd.cn" and "WKB603" to the list of non-apple keyboards
  HID: lenovo: Restrict detection of patched firmware only to USB cptkbd
  HID: Add quirk for Labtec/ODDOR/aikeec handbrake
  HID: i2c-hid: Add IDEA5002 to i2c_hid_acpi_blacklist[]
  mailmap: add address mapping for Jiri Kosina

dpll: sanitize possible null pointer dereference in dpll_pin_parent_pin_set()

User may not pass DPLL_A_PIN_STATE attribute in the pin set operation
message. Sanitize that by checking if the attr pointer is not null
and process the passed state attribute value only in that case.

Reported-by: Xingyuan Mo <hdthky0@gmail.com>
Fixes: 9d71b54b65b1 ("dpll: netlink: Add DPLL framework base functions")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://lore.kernel.org/r/20231211083758.1082853-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'ena-driver-xdp-bug-fixes'

David Arinzon says:

====================
ENA driver XDP bug fixes

This patchset contains multiple XDP-related bug fixes
in the ENA driver.
====================

Link: https://lore.kernel.org/r/20231211062801.27891-1-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: ena: Fix XDP redirection error

When sending TX packets, the meta descriptor can be all zeroes
as no meta information is required (as in XDP).

This patch removes the validity check, as when
`disable_meta_caching` is enabled, such TX packets will be
dropped otherwise.

Fixes: 0e3a3f6dacf0 ("net: ena: support new LLQ acceleration mode")
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Link: https://lore.kernel.org/r/20231211062801.27891-5-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>