git.monstr.eu Git - linux-2.6-microblaze.git/log

pwm: crc: Enable/disable PWM output on enable/disable

The pwm-crc code is using 2 different enable bits:
1. bit 7 of the PWM0_CLK_DIV (PWM_OUTPUT_ENABLE)
2. bit 0 of the BACKLIGHT_EN register

So far we've kept the PWM_OUTPUT_ENABLE bit set when disabling the PWM,
this commit makes crc_pwm_disable() clear it on disable and makes
crc_pwm_enable() set it again on re-enable.

Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200903112337.4113-12-hdegoede@redhat.com

pwm: crc: Fix period changes not having any effect

The pwm-crc code is using 2 different enable bits:
1. bit 7 of the PWM0_CLK_DIV (PWM_OUTPUT_ENABLE)
2. bit 0 of the BACKLIGHT_EN register

The BACKLIGHT_EN register at address 0x51 really controls a separate
output-only GPIO which is earmarked to be used as output connected to the
backlight-enable pin for LCD panels, this GPO is part of the PMIC's
"Display Panel Control Block." . This pin should probably be moved over
to a GPIO provider driver (and consumers modified accordingly), but that
is something for an(other) patch.

Enabling / disabling the actual PWM output is controlled by the
PWM_OUTPUT_ENABLE bit of the PWM0_CLK_DIV register.

As the comment in the old code already indicates we must disable the PWM
before we can change the clock divider. But the crc_pwm_disable() and
crc_pwm_enable() calls the old code make for this only change the
BACKLIGHT_EN register; and the value of that register does not matter for
changing the period / the divider. What does matter is that the
PWM_OUTPUT_ENABLE bit must be cleared before a new value can be written.

This commit modifies crc_pwm_config() to clear PWM_OUTPUT_ENABLE instead
when changing the period, so that period changes actually work.

Note this fix will cause a significant behavior change on some devices
using the CRC PWM output to drive their backlight. Before the PWM would
always run with the output frequency configured by the BIOS at boot, now
the period time specified by the i915 driver will actually be honored.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200903112337.4113-11-hdegoede@redhat.com

pwm: crc: Fix off-by-one error in the clock-divider calculations

The CRC PWM controller has a clock-divider which divides the clock with
a value between 1-128. But as can seen from the PWM_DIV_CLK_xxx
defines, this range maps to a register value of 0-127.

So after calculating the clock-divider we must subtract 1 to get the
register value, unless the requested frequency was so high that the
calculation has already resulted in a (rounded) divider value of 0.

Note that before this fix, setting a period of PWM_MAX_PERIOD_NS which
corresponds to the max. divider value of 128 could have resulted in a
bug where the code would use 128 as divider-register value which would
have resulted in an actual divider value of 0 (and the enable bit being
set). A rounding error stopped this bug from actually happen. This
same rounding error means that after the subtraction of 1 it is impossible
to set the divider to 128. Also bump PWM_MAX_PERIOD_NS by 1 ns to allow
setting a divider of 128 (register-value 127).

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200903112337.4113-10-hdegoede@redhat.com

pwm: crc: Fix period / duty_cycle times being off by a factor of 256

While looking into adding atomic-pwm support to the pwm-crc driver I
noticed something odd, there is a PWM_BASE_CLK define of 6 MHz and
there is a clock-divider which divides this with a value between 1-128,
and there are 256 duty-cycle steps.

The pwm-crc code before this commit assumed that a clock-divider
setting of 1 means that the PWM output is running at 6 MHZ, if that
is true, where do these 256 duty-cycle steps come from?

This would require an internal frequency of 256 * 6 MHz = 1.5 GHz, that
seems unlikely for a PMIC which is using a silicon process optimized for
power-switching transistors. It is way more likely that there is an 8
bit counter for the duty cycle which acts as an extra fixed divider
wrt the PWM output frequency.

The main user of the pwm-crc driver is the i915 GPU driver which uses it
for backlight control. Lets compare the PWM register values set by the
video-BIOS (the GOP), assuming the extra fixed divider is present versus
the PWM frequency specified in the Video-BIOS-Tables:

Device: PWM Hz set by BIOS PWM Hz specified in VBT
Asus T100TA 200 200
Asus T100HA 200 200
Lenovo Miix 2 8 23437 20000
Toshiba WT8-A 23437 20000

So as we can see if we assume the extra division by 256 then the register
values set by the GOP are an exact match for the VBT values, where as
otherwise the values would be of by a factor of 256.

This commit fixes the period / duty_cycle calculations to take the
extra division by 256 into account.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200903112337.4113-9-hdegoede@redhat.com

pwm: lpss: Remove suspend/resume handlers

PWM controller drivers should not restore the PWM state on resume. The
convention is that PWM consumers do this by calling pwm_apply_state(),
so that it can be done at the exact moment when the consumer needs
the state to be stored, avoiding e.g. backlight flickering.

The only in kernel consumers of the pwm-lpss code, the i915 driver
and the pwm-class sysfs interface code both correctly restore the
state on resume, so there is no need to do this in the pwm-lpss code.

More-over the removed resume handler is buggy, since it blindly
restores the ctrl-register contents without setting the update
bit, which is necessary to get the controller to actually use/apply
the restored base-unit and on-time-div values.

Acked-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200903112337.4113-8-hdegoede@redhat.com

pwm: lpss: Make pwm_lpss_apply() not rely on existing hardware state

Before this commit pwm_lpss_apply() was assuming 2 pre-conditions
were met by the existing hardware state:

1. That the base-unit and on-time-div read back from the
control register are those actually in use, so that it
can skip setting the update bit if the read-back value
matches the desired values.

2. That the controller is enabled when the cached
pwm_state.enabled says that the controller is enabled.

As the long history of fixes for subtle (often suspend/resume)
lpss-pwm issues shows, these assumptions are not necessary
always true.

1. Specifically is not true on some (*) Cherry Trail devices
with a nasty GFX0._PS3 method which: a. saves the ctrl reg value.
b. sets the base-unit to 0 and writes the update bit to apply/commit
c. restores the original ctrl value without setting the update bit,
so that the 0 base-unit value is still in use.

2. Assumption 2. currently is true, but only because of the code which
saves/restores the state on suspend/resume. By convention restoring the
PWM state should be done by the PWM consumer and the presence of this
code in the pmw-lpss driver is a bug. Therefor the save/restore code will
be dropped in the next patch in this series, after which this assumption
also is no longer true.

This commit changes the pwm_lpss_apply() to not make any assumptions about
the state the hardware is in. Instead it makes pwm_lpss_apply() always
fully program the PWM controller, making it much less fragile.

*) Seen on the Acer One 10 S1003, Lenovo Ideapad Miix 310 and 320 models
and various Medion models.

Acked-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200903112337.4113-7-hdegoede@redhat.com

pwm: lpss: Add pwm_lpss_prepare_enable() helper

In the not-enabled -> enabled path pwm_lpss_apply() needs to get a
runtime-pm reference; and then on any errors it needs to release it
again.

This leads to somewhat hard to read code. This commit introduces a new
pwm_lpss_prepare_enable() helper and moves all the steps necessary for
the not-enabled -> enabled transition there, so that we can error check
the entire transition in a single place and only have one pm_runtime_put()
on failure call site.

While working on this I noticed that the enabled -> enabled (update
settings) path was quite similar, so I've added an enable parameter to
the new pwm_lpss_prepare_enable() helper, which allows using it in that
path too.

Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200903112337.4113-6-hdegoede@redhat.com

pwm: lpss: Add range limit check for the base_unit register value

When the user requests a high enough period ns value, then the
calculations in pwm_lpss_prepare() might result in a base_unit value of 0.

But according to the data-sheet the way the PWM controller works is that
each input clock-cycle the base_unit gets added to a N bit counter and
that counter overflowing determines the PWM output frequency. Adding 0
to the counter is a no-op. The data-sheet even explicitly states that
writing 0 to the base_unit bits will result in the PWM outputting a
continuous 0 signal.

When the user requestes a low enough period ns value, then the
calculations in pwm_lpss_prepare() might result in a base_unit value
which is bigger then base_unit_range - 1. Currently the codes for this
deals with this by applying a mask:

base_unit &= (base_unit_range - 1);

But this means that we let the value overflow the range, we throw away the
higher bits and store whatever value is left in the lower bits into the
register leading to a random output frequency, rather then clamping the
output frequency to the highest frequency which the hardware can do.

This commit fixes both issues by clamping the base_unit value to be
between 1 and (base_unit_range - 1).

Fixes: 684309e5043e ("pwm: lpss: Avoid potential overflow of base_unit")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200903112337.4113-5-hdegoede@redhat.com

pwm: lpss: Fix off by one error in base_unit math in pwm_lpss_prepare()

According to the data-sheet the way the PWM controller works is that
each input clock-cycle the base_unit gets added to a N bit counter and
that counter overflowing determines the PWM output frequency.

So assuming e.g. a 16 bit counter this means that if base_unit is set to 1,
after 65535 input clock-cycles the counter has been increased from 0 to
65535 and it will overflow on the next cycle, so it will overflow after
every 65536 clock cycles and thus the calculations done in
pwm_lpss_prepare() should use 65536 and not 65535.

This commit fixes this. Note this also aligns the calculations in
pwm_lpss_prepare() with those in pwm_lpss_get_state().

Note this effectively reverts commit 684309e5043e ("pwm: lpss: Avoid
potential overflow of base_unit"). The next patch in this series really
fixes the potential overflow of the base_unit value.

Fixes: 684309e5043e ("pwm: lpss: Avoid potential overflow of base_unit")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200903112337.4113-4-hdegoede@redhat.com

ACPI / LPSS: Save Cherry Trail PWM ctx registers only once (at activation)

The DSDTs on most Cherry Trail devices have an ugly clutch where the PWM
controller gets turned off from the _PS3 method of the graphics-card dev:

            Method (_PS3, 0, Serialized)  // _PS3: Power State 3
            {
                ...
                            PWMB = PWMC /* \_SB_.PCI0.GFX0.PWMC */
                            PSAT |= 0x03
                            Local0 = PSAT /* \_SB_.PCI0.GFX0.PSAT */
                ...
            }

Where PSAT is the power-status register of the PWM controller.

Since the i915 driver will do a pwm_get on the pwm device as it uses it to
control the LCD panel backlight, there is a device-link marking the i915
device as a consumer of the pwm device. So that the PWM controller will
always be suspended after the i915 driver suspends (which is the right
thing to do). This causes the above GFX0 PS3 AML code to run before
acpi_lpss.c calls acpi_lpss_save_ctx().

So on these devices the PWM controller will already be off when
acpi_lpss_save_ctx() runs. This causes it to read/save all 1-s (0xffffffff)
as ctx register values.

When these bogus values get restored on resume the PWM controller actually
keeps working, since most bits are reserved, but this does set bit 3 of
the LPSS General purpose register, which for the PWM controller has the
following function: "This bit is re-used to support 32kHz slow mode.
Default is 19.2MHz as PWM source clock".

This causes the clock of the PWM controller to switch from 19.2MHz to
32KHz, which is a slow-down of a factor 600. Surprisingly enough so far
there have been few bug reports about this. This is likely because the
i915 driver was hardcoding the PWM frequency to 46 KHz, which divided
by 600 would result in a PWM frequency of approx. 78 Hz, which mostly
still works fine. There are some bug reports about the LCD backlight
flickering after suspend/resume which are likely caused by this issue.

But with the upcoming patch-series to finally switch the i915 drivers
code for external PWM controllers to use the atomic API and to honor
the PWM frequency specified in the video BIOS (VBT), this becomes a much
bigger problem. On most cases the VBT specifies either 200 Hz or 20
KHz as PWM frequency, which with the mentioned issue ends up being either
1/3 Hz, where the backlight actually visible blinks on and off every 3s,
or in 33 Hz and horrible flickering of the backlight.

There are a number of possible solutions to this problem:

1. Make acpi_lpss_save_ctx() run before GFX0._PS3
Pro: Clean solution from pov of not medling with save/restore ctx code
Con: As mentioned the current ordering is the right thing to do
Con: Requires assymmetry in at what suspend/resume phase we do the save vs
      restore, requiring more suspend/resume ordering hacks in already
      convoluted acpi_lpss.c suspend/resume code.
2. Do some sort of save once mode for the LPSS ctx
Pro: Reasonably clean
Con: Needs a new LPSS flag + code changes to handle the flag
3. Detect we have failed to save the ctx registers and do not restore them
Pro: Not PWM specific, might help with issues on other LPSS devices too
Con: If we can get away with not restoring the ctx why bother with it at
      all?
4. Do not save the ctx for CHT PWM controllers
Pro: Clean, as simple as dropping a flag?
Con: Not so simple as dropping a flag, needs a new flag to ensure that
      we still do lpss_deassert_reset() on device activation.
5. Make the pwm-lpss code fixup the LPSS-context registers
Pro: Keeps acpi_lpss.c code clean
Con: Moves knowledge of LPSS-context into the pwm-lpss.c code

1 and 5 both do not seem to be a desirable way forward.

3 and 4 seem ok, but they both assume that restoring the LPSS-context
registers is not necessary. I have done a couple of test and those do
show that restoring the LPSS-context indeed does not seem to be necessary
on devices using s2idle suspend (and successfully reaching S0i3). But I
have no hardware to test deep / S3 suspend. So I'm not sure that not
restoring the context is safe.

That leaves solution 2, which is about as simple / clean as 3 and 4,
so this commit fixes the described problem by implementing a new
LPSS_SAVE_CTX_ONCE flag and setting that for the CHT PWM controllers.

Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200903112337.4113-3-hdegoede@redhat.com

ACPI / LPSS: Resume Cherry Trail PWM controller in no-irq phase

The DSDTs on most Cherry Trail devices have an ugly clutch where the PWM
controller gets poked from the _PS0 method of the graphics-card device:

Local0 = PSAT /* \_SB_.PCI0.GFX0.PSAT */
If (((Local0 & 0x03) == 0x03))
{
    PSAT &= 0xFFFFFFFC
    Local1 = PSAT /* \_SB_.PCI0.GFX0.PSAT */
    RSTA = Zero
    RSTF = Zero
    RSTA = One
    RSTF = One
    PWMB |= 0xC0000000
    PWMC = PWMB /* \_SB_.PCI0.GFX0.PWMB */
}

Where PSAT is the power-status register of the PWM controller, so if it
is in D3 when the GFX0 device's PS0 method runs then it will turn it on
and restore the PWM ctrl register value it saved from its PS3 handler.
Note not only does it restore it, it ors it with 0xC0000000 turning it
on at a time where we may not want it to get turned on at all.

The pwm_get call which the i915 driver does to get a reference to the
PWM controller, already adds a device-link making the GFX0 device a
consumer of the PWM device. So it should already have been resumed when
the above AML runs and the AML should thus not do its undesirable poking
of the PWM controller register.

But the PCI core powers on PCI devices in the no-irq resume phase and
thus calls the troublesome PS0 method in the no-irq resume phase.
Where as LPSS devices by default are resumed in the early resume phase.

This commit sets the resume_from_noirq flag in the bsw_pwm_dev_desc
struct, so that Cherry Trail PWM controllers will be resumed in the
no-irq phase. Together with the device-link added by the pwm-get this
ensures that the PWM controller will be on when the troublesome PS0
method runs, which stops it from poking the PWM controller.

Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200903112337.4113-2-hdegoede@redhat.com

drm/i915: remove the extra modeset init layer

Streamline the modeset init by removing the extra init layer.

No functional changes, which means the cleanup path looks hideous.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/62c32c35683b843ecdc2eca2bd2d3e62cb705e96.1599056955.git.jani.nikula@intel.com

drm/i915: split out intel_modeset_driver_remove_nogem() and simplify

Split out a separate display function for driver remove after gem
deinitialization. Note that the sequence is not symmetric with
init. However use similar naming as that reflects the deinit sequence.

No functional changes.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/197fa7e488b412e147ff0fe9440c48811888f1a6.1599056955.git.jani.nikula@intel.com

drm/i915: move more display related probe to intel_modeset_init_noirq()

With the intel_modeset_* probe functions clarified, we can continue with
moving more related calls to the right layer:

- drm_vblank_init()
- intel_bios_init()
- intel_vga_register()
- intel_csr_ucode_init()

Unfortunately, for the time being, we also need to move a call to the
*wrong* layer: the power domain init.

No functional changes.

v2: move probe failure while at it, power domain init

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/da229ffbed64983f002605074533c8b2878d17ee.1599056955.git.jani.nikula@intel.com

drm/i915: split intel_modeset_init() pre/post gem init

Turn current intel_modeset_init() to a pre-gem init function, and add a
new intel_modeset_init() function and move all post-gem modeset init
there, in the correct layer. No functional changes.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5f4603f2c0216dba980338f00e0bfa791b526231.1599056955.git.jani.nikula@intel.com

drm/i915: fix regression leading to display audio probe failure on GLK

In commit 4f0b4352bd26 ("drm/i915: Extract cdclk requirements checking
to separate function") the order of force_min_cdclk_changed check and
intel_modeset_checks(), was reversed. This broke the mechanism to
immediately force a new CDCLK minimum, and lead to driver probe
errors for display audio on GLK platform with 5.9-rc1 kernel. Fix
the issue by moving intel_modeset_checks() call later.

[vsyrjala: It also broke the ability of planes to bump up the cdclk
and thus could lead to underruns when eg. flipping from 32bpp to
64bpp framebuffer. To be clear, we still compute the new cdclk
correctly but fail to actually program it to the hardware due to
intel_set_cdclk_{pre,post}_plane_update() not getting called on
account of state->modeset==false.]

Fixes: 4f0b4352bd26 ("drm/i915: Extract cdclk requirements checking to separate function")
BugLink: https://github.com/thesofproject/linux/issues/2410
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200901151036.1312357-1-kai.vehmanen@linux.intel.com

drm/i915: Add HDCP 1.4 support for MST connectors

Now that all the groundwork has been laid, we can turn on HDCP 1.4 over
MST. Everything except for toggling the HDCP signalling and HDCP 2.2
support is the same as the DP case, so we'll re-use those callbacks

Cc: Juston Li <juston.li@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191203173638.94919-12-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20191212190230.188505-13-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200117193103.156821-13-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200218220242.107265-15-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200305201236.152307-17-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200429195502.39919-17-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200623155907.22961-18-sean@poorly.run
Changes in v2:
-Toggle HDCP from encoder disable/enable
-Don't disable HDCP on MST connector destroy, leave that for encoder
disable, just ensure the check_work routine isn't running any longer
Changes in v3:
-Place the shim in the new intel_dp_hdcp.c file (Ville)
Changes in v4:
-Actually use the mst shim for mst connections (Juston)
-Use QUERY_STREAM_ENC_STATUS MST message to verify channel is encrypted
Changes in v5:
-Add sleep on disable signalling to match hdmi delay
Changes in v6:
-Disable HDCP over MST on GEN12+ since I'm unsure how it should work and I
don't have hardware to test it
Changes in v7:
-Remove hdcp2 shims for MST in favor of skipping hdcp2 init (Ramalingam)
Changes in v8:
-None

Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200818153910.27894-18-sean@poorly.run

drm/i915: Print HDCP version info for all connectors

De-duplicate the HDCP version code for each connector and print it for
all connectors.

Cc: Juston Li <juston.li@intel.com>
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Juston Li <juston.li@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200227185714.171466-1-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200305201236.152307-16-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200429195502.39919-16-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200623155907.22961-17-sean@poorly.run
Changes in v4:
- Added to the set
Changes in v5:
-Print "No connector support" for hdcp sink capability as well (Ram)
Changes in v6:
-None
Changes in v7:
-None
Changes in v8:
-None

Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200818153910.27894-17-sean@poorly.run

drm/mst: Add support for QUERY_STREAM_ENCRYPTION_STATUS MST sideband message

Used to query whether an MST stream is encrypted or not.

Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200218220242.107265-14-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200305201236.152307-15-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200429195502.39919-15-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200623155907.22961-16-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200818153910.27894-16-sean@poorly.run
Changes in v4:
-Added to the set
Changes in v5:
-None
Changes in v6:
-Use FIELD_PREP to generate request buffer bitfields (Lyude)
-Add mst selftest and dump/decode_sideband_req for QSES (Lyude)
Changes in v7:
-None
Changes in v8:
-Reverse the parsing on the hdcp_*x_device_present bits and leave
breadcrumb in case this is incorrect (Anshuman)
Changes in v8.5:
-s/DRM_DEBUG_KMS/drm_dbg_kms/ (Lyude)

Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819143133.46232-1-sean@poorly.run

drm/i915: Add connector to hdcp_shim->check_link()

Currently we derive the connector from digital port in check_link(). For
MST, this isn't sufficient since the digital port passed into the
function can have multiple connectors downstream. This patch adds
connector to the check_link() arguments so we have it when we need it.

Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200218220242.107265-13-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200305201236.152307-14-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200429195502.39919-14-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200623155907.22961-15-sean@poorly.run
Changes in v4:
-Added to the set
Changes in v5:
-None
Changes in v6:
-None
Changes in v7:
-None
Changes in v8:
-None

Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200818153910.27894-15-sean@poorly.run

drm/i915: Plumb port through hdcp init

This patch plumbs port through hdcp init instead of relying on
intel_attached_encoder() to return a non-NULL encoder which won't work
for MST connectors.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305201236.152307-13-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200429195502.39919-13-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200623155907.22961-14-sean@poorly.run
Changes in v5:
-Added to the set
Changes in v6:
-None
Changes in v7:
-None
Changes in v8:
-None

Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200818153910.27894-14-sean@poorly.run

drm/i915: Factor out HDCP shim functions from dp for use by dp_mst

These functions are all the same for dp and dp_mst, so move them into a
dedicated file for both sst and mst to use.

Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191203173638.94919-11-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20191212190230.188505-12-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200117193103.156821-12-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200218220242.107265-12-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200305201236.152307-12-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200429195502.39919-12-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200623155907.22961-13-sean@poorly.run
Changes in v2:
-None
Changes in v3:
-Created intel_dp_hdcp.c for the shared functions to live (Ville)
Changes in v4:
-Rebased on new drm logging change
Changes in v5:
-None
Changes in v6:
-None
Changes in v7:
-Rebased patch
Changes in v8:
-None

Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200818153910.27894-13-sean@poorly.run

drm/i915: Don't fully disable HDCP on a port if multiple pipes are using it

This patch is required for HDCP over MST. If a port is being used for
multiple HDCP streams, we don't want to fully disable HDCP on a port if
one of them is disabled. Instead, we just disable the HDCP signalling on
that particular pipe and exit early. The last pipe to disable HDCP will
also bring down HDCP on the port.

In order to achieve this, we need to keep a refcount in intel_digital_port
and protect it using a new hdcp_mutex.

Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191203173638.94919-8-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20191212190230.188505-9-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200117193103.156821-9-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200218220242.107265-9-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200305201236.152307-9-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200429195502.39919-9-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200623155907.22961-10-sean@poorly.run
Changes in v2:
-Move the toggle_signalling call into _intel_hdcp_disable so it's called from check_work
Changes in v3:
-None
Changes in v4:
-None
Changes in v5:
-Change WARN_ON to drm_WARN_ON
Changes in v6:
-None
Changes in v7:
-Split minor intel_hdcp_disable refactor into separate patch (Ramalingam)
Changes in v8:
-None

Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200818153910.27894-10-sean@poorly.run

drm/i915: Clean up intel_hdcp_disable

Add an out label and un-indent hdcp disable in preparation for
hdcp_mutex. No functional changes

Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429195502.39919-9-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200623155907.22961-9-sean@poorly.run
Changes in v7:
-Split into separate patch (Ramalingam)
Changes in v8:
-None

Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200818153910.27894-9-sean@poorly.run

drm/i915: Protect workers against disappearing connectors

This patch adds some protection against connectors being destroyed
before the HDCP workers are finished.

For check_work, we do a synchronous cancel after the connector is
unregistered which will ensure that it is finished before destruction.

In the case of prop_work, we can't do a synchronous wait since it needs
to take connection_mutex which could cause deadlock. Instead, we'll take
a reference on the connector when scheduling prop_work and give it up
once we're done.

Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191212190230.188505-8-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200117193103.156821-8-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200218220242.107265-8-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200305201236.152307-8-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200429195502.39919-8-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200623155907.22961-8-sean@poorly.run
Changes in v2:
-Added to the set
Changes in v3:
-Change the WARN_ON condition in intel_hdcp_cleanup to allow for
initializing connectors as well
Changes in v4:
-None
Changes in v5:
-Change WARN_ON to drm_WARN_ON
Changes in v6:
-None
Changes in v7:
-None
Changes in v8:
-None

Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200818153910.27894-8-sean@poorly.run

drm/i915: Factor out hdcp->value assignments

This is a bit of housecleaning for a future patch. Instead of sprinkling
hdcp->value assignments and prop_work scheduling everywhere, introduce a
function to do it for us.

Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191203173638.94919-7-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20191212190230.188505-7-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200117193103.156821-7-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200218220242.107265-7-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200305201236.152307-7-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200429195502.39919-7-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200623155907.22961-7-sean@poorly.run
Changes in v2:
-None
Changes in v3:
-None
Changes in v4:
-Rebased on top of drm_* logging changes
Changes in v5:
-Change WARN_ON to drm_WARN_ON
Changes in v6:
-None
Changes in v7:
-None
Changes in v8:
-None

Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200818153910.27894-7-sean@poorly.run

drm/i915: Use the cpu_transcoder in intel_hdcp to toggle HDCP signalling

Instead of using intel_dig_port's encoder pipe to determine which
transcoder to toggle signalling on, use the cpu_transcoder field already
stored in intel_hdmi.

This is particularly important for MST.

Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191212190230.188505-6-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200117193103.156821-6-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200218220242.107265-6-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200305201236.152307-6-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200429195502.39919-6-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200623155907.22961-6-sean@poorly.run
Changes in v2:
-Added to the set
Changes in v3:
-s/hdcp/hdmi/ in commit msg (Ram)
Changes in v4:
-Rebased on intel_de_(read|write) change
Changes in v5:
-Update hdcp->cpu_transcoder in intel_hdcp_enable so it works with pipe != 0
Changes in v6:
-None
Changes in v7:
-None
Changes in v8:
-None

Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200818153910.27894-6-sean@poorly.run

drm/i915: Intercept Aksv writes in the aux hooks

Instead of hand rolling the transfer ourselves in the hdcp hook, inspect
aux messages and add the aksv flag in the aux transfer hook.

IIRC, this was the original implementation and folks wanted this hack to
be isolated to the hdcp code, which makes sense.

However in testing an LG monitor on my desk, I noticed it was passing
back a DEFER reply. This wasn't handled in our hand-rolled code and HDCP
auth was failing as a result. Instead of copy/pasting all of the retry
logic and delays from drm dp helpers, let's just use the helpers and hide
the aksv select as best as we can.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191203173638.94919-3-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20191212190230.188505-5-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200117193103.156821-5-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200218220242.107265-5-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200305201236.152307-5-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200429195502.39919-5-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200623155907.22961-5-sean@poorly.run
Changes in v2:
-Remove 'generate' in intel_dp_aux_generate_xfer_flags, make arg const (Ville)
-Bundle Aksv if statement together (Ville)
-Rename 'txbuf' to 'aksv' (Ville)
Changes in v3:
-None
Changes in v4:
-None
Changes in v5:
-None
Changes in v6:
-None
Changes in v7:
-None
Changes in v8:
-None

Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200818153910.27894-5-sean@poorly.run

drm/i915: WARN if HDCP signalling is enabled upon disable

HDCP signalling should not be left on, WARN if it is

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191212190230.188505-4-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200117193103.156821-4-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200218220242.107265-4-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200305201236.152307-4-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200429195502.39919-4-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200623155907.22961-4-sean@poorly.run
Changes in v2:
-Added to the set in lieu of just clearing the bit
Changes in v3:
-None
Changes in v4:
-None
Changes in v5:
-Change WARN_ON to drm_WARN_ON
Changes in v6:
-None
Changes in v7:
-Rebased, variable name changed from 'ctl' to 'val'
Changes in v8:
-None

Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200818153910.27894-4-sean@poorly.run

drm/i915: Clear the repeater bit on HDCP disable

On HDCP disable, clear the repeater bit. This ensures if we connect a
non-repeater sink after a repeater, the bit is in the state we expect.

Fixes: ee5e5e7a5e0f ("drm/i915: Add HDCP framework + base implementation")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ramalingam C <ramalingam.c@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.17+
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191212190230.188505-3-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200117193103.156821-3-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200218220242.107265-3-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200305201236.152307-3-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200429195502.39919-3-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200623155907.22961-3-sean@poorly.run
Changes in v2:
-Added to the set
Changes in v3:
-None
  I had previously agreed that clearing the rep_ctl bits on enable would
  also be a good idea. However when I committed that idea to code, it
  didn't look right. So let's rely on enables and disables being paired
  and everything outside of that will be considered a bug
Changes in v4:
-s/I915_(READ|WRITE)/intel_de_(read|write)/
Changes in v5:
-None
Changes in v6:
-None
Changes in v7:
-None
Changes in v8:
-None

Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200818153910.27894-3-sean@poorly.run

drm/i915: Fix sha_text population code

This patch fixes a few bugs:

1- We weren't taking into account sha_leftovers when adding multiple
   ksvs to sha_text. As such, we were or'ing the end of ksv[j - 1] with
   the beginning of ksv[j]

2- In the sha_leftovers == 2 and sha_leftovers == 3 case, bstatus was
   being placed on the wrong half of sha_text, overlapping the leftover
   ksv value

3- In the sha_leftovers == 2 case, we need to manually terminate the
   byte stream with 0x80 since the hardware doesn't have enough room to
   add it after writing M0

The upside is that all of the HDCP supported HDMI repeaters I could
find on Amazon just strip HDCP anyways, so it turns out to be _really_
hard to hit any of these cases without an MST hub, which is not (yet)
supported. Oh, and the sha_leftovers == 1 case works perfectly!

Fixes: ee5e5e7a5e0f ("drm/i915: Add HDCP framework + base implementation")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ramalingam C <ramalingam.c@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.17+
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191203173638.94919-2-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20191212190230.188505-2-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200117193103.156821-2-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200218220242.107265-2-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200305201236.152307-2-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200429195502.39919-2-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20200623155907.22961-2-sean@poorly.run
Changes in v2:
-None
Changes in v3:
-None
Changes in v4:
-Rebased on intel_de_write changes
Changes in v5:
-None
Changes in v6:
-None
Changes in v7:
-None
Changes in v8:
-None

Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200818153910.27894-2-sean@poorly.run

drm/i915: break TGL pci-ids in GT 1 & 2

I'll need this in IGT to identify the different kind of GTs and apply
the right performance query configuration.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200828133125.157171-1-lionel.g.landwerlin@intel.com

drm/i915/display: Ensure that ret is always initialized in icl_combo_phy_verify_state

Clang warns:

drivers/gpu/drm/i915/display/intel_combo_phy.c:268:3: warning: variable
'ret' is uninitialized when used here [-Wuninitialized]
                ret &= check_phy_reg(dev_priv, phy, ICL_PORT_TX_DW8_LN0(phy),
                ^~~
drivers/gpu/drm/i915/display/intel_combo_phy.c:261:10: note: initialize
the variable 'ret' to silence this warning
        bool ret;
                ^
                 = 0
1 warning generated.

In practice, the bug this warning appears to be concerned with would not
actually matter because ret gets initialized to the return value of
cnl_verify_procmon_ref_values. However, that does appear to be a bug
since it means the first hunk of the patch this fixes won't actually do
anything (since the values of check_phy_reg won't factor into the final
ret value). Initialize ret to true then make all of the assignments a
bitwise AND with itself so that the function always does what it should
do.

Fixes: 239bef676d8e ("drm/i915/display: Implement new combo phy initialization step")
Link: https://github.com/ClangBuiltLinux/linux/issues/1094
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200828202830.7165-1-jose.souza@intel.com
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915/ehl: Update voltage swing table

Update with latest tuning in the table.

v3: Fix values of to last columns.

BSpec: 21257
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826201549.83658-3-jose.souza@intel.com

drm/i915/display/ehl: Use EHL DP tables for eDP ports without low power support

Reusing icl_get_combo_buf_trans() for eDP was causing the wrong table
being used when the eDP port don't support low power voltage swing table.

v2: Only use icl_combo_phy_ddi_translations_edp_hbr3 if low_vswing is
set as EHL combo phy supports HBR3 (Matt R)

Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Cc: Lee Shawn C <shawn.c.lee@intel.com>
Cc: Khaled Almahallawy <khaled.almahallawy@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826201549.83658-2-jose.souza@intel.com

drm/i915/display/tgl: Use TGL DP tables for eDP ports without low power support

Reusing icl_get_combo_buf_trans() for eDP was causing the wrong table
being used when the eDP port don't support low power voltage swing table.

Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Cc: Lee Shawn C <shawn.c.lee@intel.com>
Cc: Khaled Almahallawy <khaled.almahallawy@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826201549.83658-1-jose.souza@intel.com

drm/i915/tgl: Fix stepping WA matching

TGL made stepping a litte mess, workarounds refer to the stepping of
the IP(GT or Display) not of the GPU stepping so it would already
require the same solution as used in commit 96c5a15f9f39
("drm/i915/kbl: Fix revision ID checks").
But to make things even more messy it have a different IP stepping
mapping between SKUs and the same stepping revision of GT do not match
the same HW between TGL U/Y and regular TGL.

So it was required to have 2 different macros to check GT WAs while
for Display we are able to use just one macro that uses the right
revids table.

All TGL workarounds checked and updated accordingly.

v2:
- removed TODO to check if WA 14010919138 applies to regular TGL.
- fixed display stepping in regular TGL (Anusha)

BSpec: 52890
BSpec: 55378
BSpec: 44455
Reviewed-by: Anusha Srivatsa <anusha.srivtsa@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Penne Lee <penne.y.lee@intel.com>
Cc: Guangyao Bai <guangyao.bai@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200827233943.400946-1-jose.souza@intel.com

drm/i915/display: Fix DRRS debugfs

Supported and enabled are different things so printing both.

v3: using drrs->type instead of vbt.drrs_type

Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Srinivas K <srinivasx.k@intel.com>
Cc: Hariom Pandey <hariom.pandey@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200825171331.17971-3-jose.souza@intel.com

drm/i915/display: Disable DRRS when needed in fastsets

Changes in the configuration could cause PSR to be compatible and
enabled so driver must also be able to disable DRRS when doing
fastsets.

v2: Fixed name of DRRS compute function (Anshuman)

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/209
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/173
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/209
Cc: Srinivas K <srinivasx.k@intel.com>
Cc: Hariom Pandey <hariom.pandey@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200825171331.17971-2-jose.souza@intel.com

drm/i915/display: Compute has_drrs after compute has_psr

DRRS and PSR can't be enable together, so giving preference to PSR
as it allows more power-savings by complete shutting down display,
so to guarantee this, it should compute DRRS state after compute PSR.

Cc: Srinivas K <srinivasx.k@intel.com>
Cc: Hariom Pandey <hariom.pandey@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200825171331.17971-1-jose.souza@intel.com

drm/i915/vlv_dsi_pll: fix spelling mistake "Cant" -> "Can't"

There is a spelling mistake in a drm_err message. Fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200810095952.60968-1-colin.king@canonical.com

drm/i915/gt: Implement WA_1406941453

Enable HW Default flip for small PL.

bspec: 52890
bspec: 53508
bspec: 53273

v2: rebase to drm-tip
v3: move from ctx to gt workarounds. Remove whitelist.
v4: move to rcs WA init

Cc: Matt Atwood <matthew.s.atwood@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826025724.20944-1-clinton.a.taylor@intel.com

drm/i915/hdcp: No direct access to power_well desc

HDCP code doesn't require to access power_well internal stuff,
instead it should use the intel_display_power_well_is_enabled()
to get the status of desired power_well.
No functional change.

v2:
- used with_intel_runtime_pm instead of get/put. [Jani]
v3:
- rebased.

Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200805114521.867-3-anshuman.gupta@intel.com

drm/i915/hdcp: Add update_pipe early return

Currently intel_hdcp_update_pipe() is also getting called for non-hdcp
connectors and get through its conditional code flow, which is completely
unnecessary for non-hdcp connectors, therefore it make sense to
have an early return. No functional change.

v2:
- rebased.

Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200805114521.867-2-anshuman.gupta@intel.com

drm/i915: Update DRIVER_DATE to 20200824

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Fix cmd parser desc matching with masks

Our variety of defined gpu commands have the actual
command id field and possibly length and flags applied.

We did start to apply the mask during initialization of
the cmd descriptors but forgot to also apply it on comparisons.

Fix comparisons in order to properly deny access with
associated commands.

v2: fix lri with correct mask (Chris)

References: 926abff21a8f ("drm/i915/cmdparser: Ignore Length operands during command matching")
Reported-by: Nicolai Stange <nstange@suse.de>
Cc: stable@vger.kernel.org # v5.4+
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tyler Hicks <tyhicks@canonical.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Chris Wilson <chris.p.wilson@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200817195926.12671-1-mika.kuoppala@linux.intel.com

drm/i915: Apply Wa_14011264657:gen11+

Add minimum width to planes, variable with specific formats for gen11+
to reflect recent bspec changes.

Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200812210702.7153-1-matthew.s.atwood@intel.com

drm/i915: Update TGL and RKL HuC firmware versions

Major upgrade of HuC firmware with fixes and new features.

Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200813200029.25307-2-jose.souza@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Update TGL and RKL DMC firmware versions

Fixes around DC5, DC6 and DC3CO in those new firmwares.

Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200813200029.25307-1-jose.souza@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915/display: Implement WA 1408330847

From the 3 WAs for PSR2 man track/selective fetch this is only one
needed when doing single full frames at every flip.

Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200810174144.76761-2-jose.souza@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Initial implementation of PSR2 selective fetch

All GEN12 platforms supports PSR2 selective fetch but not all GEN12
platforms supports PSR2 hardware tracking(aka RKL).

This feature consists in software programming registers with the
damaged area of each plane this way hardware will only fetch from
memory those areas and sent the PSR2 selective update blocks to panel,
saving even more power.

But as initial step it is only enabling the full frame fetch at
every flip, the actual selective fetch part will come in a future
patch.

Also this is only handling the page flip side, it is still completely
missing frontbuffer modifications, that is why the
enable_psr2_sel_fetch parameter was added.

v3:
- calling intel_psr2_sel_fetch_update() during the atomic check phase
(Ville)

BSpec: 55229
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200810174144.76761-1-jose.souza@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915/kbl: Fix revision ID checks

We usually assume that increasing PCI device revision ID's translates to
newer steppings; macros like IS_KBL_REVID() that we use rely on this
behavior.  Unfortunately this turns out to not be true on KBL; the
newer device 2 revision ID's sometimes go backward to older steppings.
The situation is further complicated by different GT and display
steppings associated with each revision ID.

Let's work around this by providing a table to map the revision ID to
specific GT and display steppings, and then perform our comparisons on
the mapped values.

v2:
- Move the kbl_revids[] array to intel_workarounds.c to avoid compiler
   warnings about an unused variable in files that don't call the
   macros (kernel test robot).

Bspec: 18329
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200811032105.2819370-1-matthew.d.roper@intel.com
Reviewed-by: Swathi Dhanavanthri <swathi.dhanavanthri@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915/tgl: Add new voltage swing table

This new HBR2 table for TGL-U and TGL-Y is required to pass
DisplayPort compliance.

BSpec: 49291
Cc: Khaled Almahallawy <khaled.almahallawy@intel.com>
Reviewed-by: Khaled Almahallawy<khaled.almahallawy@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200807192629.64134-2-jose.souza@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915/tgl: Set subplatforms

There is no way to differentiate TGL-U from TGL-Y by the PCI ids as
some ids are available in both SKUs.
So here using the root device id in the PCI bus that iGPU is in
to differentiate between U and Y.

BSpec: 44455
Reviewed-by: Swathi Dhanavanthri <swathi.dhanavanthri@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200807192629.64134-1-jose.souza@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915/tgl: Fix TC-cold block/unblock sequence

The command register is the PCODE MBOX low register not the high one as
described by the spec. This left the system with the TC-cold power state
being blocked all the time. Fix things by using the correct register.

Also to make sure we retry a request for at least 600usec, when the
PCODE MBOX command itself succeeded, but the TC-cold block command
failed, sleep for 1msec unconditionally after any fail.

The change was tested with JTAG register read of the HW/FW's actual
TC-cold state, which reported the expected states after this change.

Tested-by: Nivedita Swaminathan <nivedita.swaminathan@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200805150056.24248-1-imre.deak@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915/tgl: Make sure TC-cold is blocked before enabling TC AUX power wells

The dependency between power wells is determined by the ordering of the
power well list: when enabling the power wells for a domain, this
happens walking the power well list forward, while disabling them
happens in the reverse direction. Accordingly a power well on the list
must follow any other power well it depends on.

Since the TC AUX power wells depend on TC-cold being blocked, move the
TC-cold off power well before all AUX power wells.

Fixes: 3c02934b24e3 ("drm/i915/tc/tgl: Implement TC cold sequences")
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200720232952.16228-1-imre.deak@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915/selftests: Avoid passing a random 0 into ilog2

igt_mm_config() calls ilog2() on the (pseudo)random 21-bit number
s>>12. Once in 2 million seeds, this is zero and ilog2 summons
the nasal demons.

There was an attempt to handle this case with a max(), but that's
too late; ms could already be something bizarre.

Given that the low 12 bits of s and ms are always zero, it's a lot
simpler just to divide them by 4096, then everything fits into 32
bits, and we can easily generate a random number 1 <= s <= 0x1fffff.

Fixes: 14d1b9a6247c ("drm/i915: buddy allocator")
Signed-off-by: George Spelvin <lkml@sdf.org>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200325192429.GA8865@SDF.ORG
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: add syncobj timeline support

Introduces a new parameters to execbuf so that we can specify syncobj
handles as well as timeline points.

v2: Reuse i915_user_extension_fn

v3: Check that the chained extension is only present once (Chris)

v4: Check that dma_fence_chain_find_seqno returns a non NULL fence (Lionel)

v5: Use BIT_ULL (Chris)

v6: Fix issue with already signaled timeline points,
    dma_fence_chain_find_seqno() setting fence to NULL (Chris)

v7: Report ENOENT with invalid syncobj handle (Lionel)

v8: Check for out of order timeline point insertion (Chris)

v9: After explanations on
    https://lists.freedesktop.org/archives/dri-devel/2019-August/229287.html
    drop the ordering check from v8 (Lionel)

v10: Set first extension enum item to 1 (Jason)

v11: Rebase

v12: Allow multiple extension nodes of timeline syncobj (Chris)

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Co-authored-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v11)
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804085954.350343-3-lionel.g.landwerlin@intel.com
Link: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2901
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: introduce a mechanism to extend execbuf2

We're planning to use this for a couple of new feature where we need
to provide additional parameters to execbuf.

v2: Check for invalid flags in execbuffer2 (Lionel)

v3: Rename I915_EXEC_EXT -> I915_EXEC_USE_EXTENSIONS (Chris)

v4: Rebase
Move array fence parsing in i915_gem_do_execbuffer()

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804085954.350343-2-lionel.g.landwerlin@intel.com
Link: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2901
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Revert "drm/i915/rkl: Add Wa_14011224835 for PHY B initialization"

The hardware team has dropped this workaround from the bspec; it is no
longer needed.

This reverts commit 111822b21be995a3a4a731066db3d820523c57f7.

Bspec: 49291
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804044024.1931170-1-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Fix wrong return value in intel_atomic_check()

In the case of calling check_digital_port_conflicts() failed, a
negative error code -EINVAL should be returned.

Fixes: bf5da83e4bd80 ("drm/i915: Move check_digital_port_conflicts() earier")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200802111535.5200-1-tianjia.zhang@linux.alibaba.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Fix wrong return value

In function i915_active_acquire_preallocate_barrier(), not all
paths have the return value set correctly, and in case of memory
allocation failure, a negative error code should be returned.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200802115655.25568-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Update bw_buddy pagemask table

A recent bspec update removed the LPDDR4 single channel entry from the
buddy register table, but added a new four-channel entry.

Workaround 1409767108 hasn't been updated with any guidance for four
channel configurations, so we leave that alternate table unchanged for
now.

Bspec 49218
Fixes: 3fa01d642fa7 ("drm/i915/tgl: Program BW_BUDDY registers during display init")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200612204734.3674650-1-matthew.d.roper@intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Add a couple of missing i915_active_fini()

We use i915_active_fini() as a debug check on the i915_active state
before freeing. If we forget to call it, we may end up angering the
debugobjects contained within.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200731085015.32368-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915/display: Check for an LPSP encoder before dereferencing

Avoid a GPF at

<1>[   20.177320] BUG: kernel NULL pointer dereference, address: 000000000000007c
<1>[   20.177322] #PF: supervisor read access in kernel mode
<1>[   20.177323] #PF: error_code(0x0000) - not-present page
<6>[   20.177324] PGD 0 P4D 0
<4>[   20.177327] Oops: 0000 [#1] PREEMPT SMP PTI
<4>[   20.177328] CPU: 1 PID: 944 Comm: debugfs_test Not tainted 5.8.0-rc7-CI-CI_DRM_8814+ #1
<4>[   20.177330] Hardware name: Dell Inc. XPS 13 9360/0823VW, BIOS 2.9.0 07/09/2018
<4>[   20.177372] RIP: 0010:i915_lpsp_capability_show+0x44/0xc0 [i915]
<4>[   20.177374] Code: 0f b6 81 ca 0d 00 00 3c 0b 74 77 76 19 3c 0c 75 44 83 7e 7c 01 7e 2f 48 c7 c6 d7 b9 47 a0 e8 43 df 06 e1 31 c0 c3 3c 09 72 2b <8b> 46 7c 85 c0 75 e6 8b 82 e4 00 00 00 89 c2 83 e2 fb 83 fa 0a 74
<4>[   20.177376] RSP: 0018:ffffc90000cebe38 EFLAGS: 00010246
<4>[   20.177377] RAX: 0000000000000009 RBX: ffff888267fe6a58 RCX: ffff888252d10000
<4>[   20.177378] RDX: ffff88824a9a4000 RSI: 0000000000000000 RDI: ffff888267fe6a30
<4>[   20.177379] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000001
<4>[   20.177380] R10: 0000000000000001 R11: 0000000000000000 R12: ffffc90000cebf08
<4>[   20.177381] R13: 00000000ffffffff R14: 0000000000000001 R15: ffff888267fe6a30
<4>[   20.177383] FS:  00007f6f9c6b5e40(0000) GS:ffff888276480000(0000) knlGS:0000000000000000
<4>[   20.177384] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4>[   20.177385] CR2: 000000000000007c CR3: 0000000255f04006 CR4: 00000000003606e0
<4>[   20.177386] Call Trace:
<4>[   20.177390]  seq_read+0xcb/0x420

which is presumably from having no encoder attached at that time.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2175
Fixes: 8806211fe7b3 ("drm/i915: Add i915_lpsp_capability debugfs")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200729130912.30093-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Remove gen check before calling intel_rps_boost

It's been a while since gen6_rps_boost() [that only worked on gen6+] was
replaced by intel_rps_boost() that understood itself when rps was
active. Since the intel_rps_boost() is gen-agnostic, just call it.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200728152219.1387-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915/selftests: Add compiler paranoia for checking HWSP values

Since we want to read the values from the HWSP as written to by the GPU,
warn the compiler that the values are volatile.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200728152110.830-2-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Copy default modparams to mock i915_device

Since we use the module parameters stored inside the drm_i915_device
itself, we need to ensure the mock i915_device also sets up the right
defaults.

Fixes: 8a25c4be583d ("drm/i915/params: switch to device specific parameters")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200728150600.4509-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915/display/fbc: Disable fbc by default on TGL

Fbc is causing random underruns in CI execution on TGL platforms.
Disabling the same while the problem is being debugged and analyzed.

v2: Moved the check below the module param check (Ville)

Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716145857.6911-1-uma.shankar@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Implement WA 14011294188

Although the WA description targets the platforms it is a workaround
for the affected PCHs, that is why it is being checked.

v2: excluding DG1 fake PCH from WA

BSpec: 52890
BSpec: 53273
BSpec: 52888
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200727164729.28836-1-jose.souza@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915/selftests: Downgrade severity of CS/SRM frequency scaling tests

Gracefully skip over the failures in the frequency scaling for the
moment, the results are under review.

References: https://gitlab.freedesktop.org/drm/intel/-/issues/1754
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: "Sundaresan, Sujaritha" <sujaritha.sundaresan@intel.com>
Cc: "Ewins, Jon" <jon.ewins@intel.com>
Reviewed-by: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200723153805.8076-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915/rkl: Add Wa_14011224835 for PHY B initialization

After doing normal PHY-B initialization on Rocket Lake, we need to
manually copy some additional PHY-A register values into PHY-B
registers.

Note that the bspec's combo phy page doesn't specify that this
workaround is restricted to specific platform steppings (and doesn't
even do a very good job of specifying that RKL is the only platform this
is needed on), but the RKL workaround page lists this as relevant only
for A and B steppings, so I'm trusting that information for now.

v2: Make rkl_combo_phy_b_init_wa() static

v3:
- Minimize variables in WA function. (Jose)
- Fix timeout duration (usec vs msec). (Jose)
- Add verification of workaround. (Jose)
- Fix stepping bounds in comment.

Bspec: 49291
Bspec: 53273
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716220551.2730644-6-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915/rkl: Handle HTI

If HTI (also sometimes called HDPORT) is enabled at startup, it may be
using some of the PHYs and DPLLs making them unavailable for general
usage.  Let's read out the HDPORT_STATE register and avoid making use of
resources that HTI is already using.

v2:
- Fix minor checkpatch warnings

v3:
- Just readout HDPORT_STATE register once during init and then parse it
   later as needed.
- Add a 'has_hti' device info flag to track whether we should readout
   HDPORT_STATE or not.  We can skip the platform/flag tests later since
   the hti_state in dev_priv will remain 0 for platforms it does not
   apply to.
- Move PLL masking into icl_get_combo_phy_dpll() since at the moment
   RKL is the only platform that has HTI.  (Jose)

Bspec: 49189
Bspec: 53707
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716220551.2730644-5-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915/rkl: Add DPLL4 support

Rocket Lake has a third DPLL (called 'DPLL4') that must be used to
enable a third display.  Unlike EHL's variant of DPLL4, the RKL variant
behaves the same as DPLL0/1.  And despite its name, the DPLL4 registers
are offset as if it were DPLL2.

v2:
- Add new .update_ref_clks() hook.

v3:
- Renumber TBT PLL to '3' and switch _MMIO_PLL3 to _MMIO_PLL (Lucas)

v4:
- Don't drop _MMIO_PLL3; although it's now unused, we're going to need
   it very soon again for upcoming DG1 patches.  (Lucas)

v5:
- Don't re-number TBT PLL and beyond, just use new RKL_DPLL_CFGCR
   macros to lookup the proper registers instead.  Although renumbering
   the PLLs might be something we want to consider down the road, it
   opens a big can of worms right now since a bunch of places in the
   code have an assumption that the PLL table has idx==id and no holes.
   Renumbering creates a hole for TGL, so we'd either need to allow
   holes in the table or break the idx==id invariant, both of which are
   somewhat invasive changes to the design.

Bspec: 49202
Bspec: 49443
Bspec: 50288
Bspec: 50289
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716220551.2730644-4-matthew.d.roper@intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915/rkl: Add initial workarounds

RKL and TGL share some general gen12 workarounds, but each platform also
has its own platform-specific workarounds.

v2:
- Add Wa_1604555607 for RKL.  This makes RKL's ctx WA list identical to
   TGL's, so we'll have both functions call the tgl_ function for now;
   this workaround isn't listed for DG1 so we don't want to add it to
   the general gen12_ function.

Cc: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716220551.2730644-3-matthew.d.roper@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915/rkl: Handle new DPCLKA_CFGCR0 layout

RKL uses a slightly different bit layout for the DPCLKA_CFGCR0 register.

v2:
- Fix inverted mask application when updating ICL_DPCLKA_CFGCR0
- Checkpatch style fixes

Bspec: 50287
Cc: Aditya Swarup <aditya.swarup@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716220551.2730644-2-matthew.d.roper@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Move WaDisableDopClockGating:skl to skl_init_clock_gating()

It's silly to have if(SKL) checks in gen9_init_clock_gating() when
we can just move those bits into skl_init_clock_gating().

I'm not entirely convinced we even need this w/a, or if we do
then maybe we want it for kbl/cfl as well. IIRC it was only
listed in the wadb, but that is now dead so can't double check
anymore. Bspec doesn't seem to have any purely skl specific
DOP clock gating workarounds listed.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716190426.17047-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915/display: Implement HOBL

Hours Of Battery Life is a new GEN12+ power-saving feature that allows
supported motherboards to use a special voltage swing table for eDP
panels that uses less power.

So here if supported by HW, OEM will set it in VBT and i915 will try
to train link with HOBL vswing table if link training fails it fall
back to the original table.

intel_ddi_dp_preemph_max() was optimized to only check the HOBL flag
instead of do something like is done in intel_ddi_dp_voltage_max()
because it is only called after the first entry of the voltage swing
table was loaded so the HOBL flag is valid at that point.

v3:
- removed a few parameters of icl_ddi_combo_vswing_program() that
can be taken from encoder

v4:
- using the HOBL vswing table until training fails completely (Ville)

v5:
- not reducing lane or link rate when link training fails with HOBL
active
- duplicated the HOBL voltage swing entry to match DP spec requirement

v6:
- removed the optional VS 3 & pre-emp 0 from HOBL table
- changed from u8:1 to bool to store hobl_failed/active

BSpec: 49291
BSpec: 49399
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200715175637.33763-1-jose.souza@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Remove dubious Valleyview PCI IDs

0x0155 is rather Ivy Bridge PCI-E Root Port.
0x0157 from the same commit ff049b6ce21d ("drm/i915: bind driver to ValleyView chipsets")
is likely wrong too. Nowhere is it independetly confirmed or mentioned.

Signed-off-by: Alexei Podtelezhnikov <apodtele@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200428034752.3975-1-apodtele@gmail.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Provide the perf pmu.module

Rather than manually implement our own module reference counting for perf
pmu events, finally realise that there is a module parameter to struct
pmu for this very purpose.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716094643.31410-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915/ddi: Don't rewrite DDI_BUF_CTL reg during DP link training

The value we program to DDI_BUF_CTL changes at the following places:
- At enabling/disabling the output to configure the port width etc, and
  to enable/disable the DDI BUF function.
- At the beginning/end of link re-training to disable/re-enable the DDI
  BUF function.
- On HSW/BDW/SKL to change the voltage swing/pre-emph levels.

Except of the above the value we program to the DDI_BUF_CTL register
(intel_dp->DP) doesn't change, so no need to reprogram the register when
changing the link training patterns (which is programmed via the
DP_TP_CTL register on DDI platforms).

v2:
- Fix the commit message wrt. voltage/pre-emph level values in
  intel_dp->DP. (Ville)

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200714153141.10280-2-imre.deak@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915/ddi: Don't frob the DP link scramble disabling flag

According to BSpec this flag should not be changed while the DDI
function is enabled. On BDW+ the DP_TP_CTL register spec also states it
explicitly that the HW takes care of enabling/disabling the scrambling
for training patterns (and it must stay enabled for normal pixel
output). Assume that this HW automatic handling of scrambling is also
true for HSW.

BSpec: 8013, 7557, 50484

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200714153141.10280-1-imre.deak@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Make i830 .get_cdclk() assignment less confusing

Explicitly check for i830 when assigning the .get_cdclk() vfunc,
and then deal with the case of not having assigned the vfunc
separately. Less confusing, and gets rid of the checkpatch complaint
about using {} on one branch but not the others.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200714152626.380-3-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Fix some whitespace

Some spaces have snuck in where we want tabs. Fix it.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200714152626.380-2-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Pack struct intel_cdclk_vals

There's a pointless hole in struct intel_cdclk_vals, get rid of it.
Fortunately we already use named initializers so the order does not
matter.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200714152626.380-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915/fbc: Limit cfb to the first 256MiB of stolen on g4x+

Since g4x the CFB base only takes a 28bit offset into stolen.
Not sure if the CFB is allowed to start below that limit but
then extend beyond it. Let's assume not and just restrict the
allocation to the first 256MiB (in the unlikely case
we have more stolen than that).

v2: s/BIT/BIT_ULL/ (Chris)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200714201945.18959-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/ttm: revert "drm/ttm: make TT creation purely optional v3"

This reverts commit 2ddef17678bc2ea1d20517dd2b4ed4aa967ffa8b.

As it turned out VMWGFX needs a much wider audit to fix this.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200811092400.188124-1-christian.koenig@amd.com

Merge branch 'vmwgfx-next-5.9' of git://people.freedesktop.org/~sroland/linux into drm-next

The drm_mode_config_reset patches are very important fixing a recently
introduced kernel crash, the others fix various older issues which are
a bit less serious in practice.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: "Roland Scheidegger (VMware)" <rscheidegger.oss@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200812005941.19465-1-rscheidegger.oss@gmail.com

Merge tag 'amd-drm-fixes-5.9-2020-08-07' of git://people.freedesktop.org/~agd5f/linux into drm-next

amd-drm-fixes-5.9-2020-08-07:

amdgpu:
- Re-add spelling typo fix
- Sienna Cichlid fixes
- Navy Flounder fixes
- DC fixes
- SMU i2c fix
- Power fixes

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200807222843.3909-1-alexander.deucher@amd.com

Merge tag 'drm-misc-fixes-2020-08-04' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

* backmerge from drm-fixes at v5.8-rc7
* add orientation quirk for ASUS T103HAF
* drm/omap: force runtime PM suspend on system suspend
* drm/tidss: fix modeset init for DPI panels
* re-added docs for drm_gem_flink_ioctl()
* ttm: fix page-offset calculation within TTM

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804125510.GA29670@linux-uq9g

Merge tag 'v5.8' into drm-next

I need to backmerge 5.8 as I've got a bunch of fixes sitting
on an rc7 base that I want to land.

Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/vmwgfx: fix spelling mistake "Cant" -> "Can't"

There is a spelling mistake in a DRM_ERROR message. Fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Roland Scheidegger <sroland@vmware.com>

drm/vmwgfx: fix spelling mistake "Cound" -> "Could"

There is a spelling mistake in a DRM_ERROR message. Fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Roland Scheidegger <sroland@vmware.com>

drm/vmwgfx/ldu: Use drm_mode_config_reset

Same problem as in stdu, same fix.

Fixes: 51f644b40b4b ("drm/atomic-helper: reset vblank on crtc reset")
Acked-by: Charmaine Lee <charmainel@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Signed-off-by: Roland Scheidegger <sroland@vmware.com>

drm/vmwgfx/sou: Use drm_mode_config_reset

Same problem as in stdu, same fix.

Fixes: 51f644b40b4b ("drm/atomic-helper: reset vblank on crtc reset")
Acked-by: Charmaine Lee <charmainel@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Signed-off-by: Roland Scheidegger <sroland@vmware.com>

drm/vmwgfx/stdu: Use drm_mode_config_reset

When converting to atomic the state reset was done by directly calling
the functions, and before the modeset object was fully initialized.
This means the various ->dev pointers weren't set up.

After

commit 51f644b40b4b794b28b982fdd5d0dd8ee63f9272
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Fri Jun 12 18:00:49 2020 +0200

drm/atomic-helper: reset vblank on crtc reset

this started to oops because now we're trying to derefence
drm_crtc->dev. Fix this up by entirely switching over to
drm_mode_config_reset, called once everything is set up.

Fixes: 51f644b40b4b ("drm/atomic-helper: reset vblank on crtc reset")
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Tested-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Roland Scheidegger <sroland@vmware.com>

drm/vmwgfx: Fix two list_for_each loop exit tests

These if statements are supposed to be true if we ended the
list_for_each_entry() loops without hitting a break statement but they
don't work.

In the first loop, we increment "i" after the "if (i == unit)" condition
so we don't necessarily know that "i" is not equal to unit at the end of
the loop.

In the second loop we exit when mode is not pointing to a valid
drm_display_mode struct so it doesn't make sense to check "mode->type".

Fixes: a278724aa23c ("drm/vmwgfx: Implement fbdev on kms v2")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Roland Scheidegger <sroland@vmware.com>

drm/vmwgfx: Use correct vmw_legacy_display_unit pointer

The "entry" pointer is an offset from the list head and it doesn't
point to a valid vmw_legacy_display_unit struct. Presumably the
intent was to point to the last entry.

Also the "i++" wasn't used so I have removed that as well.

Fixes: d7e1958dbe4a ("drm/vmwgfx: Support older hardware.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Roland Scheidegger <sroland@vmware.com>