Ian Rogers [Thu, 21 Nov 2024 00:09:55 +0000 (16:09 -0800)]
perf tests: Fix hwmon parsing with PMU name test
Incorrectly the hwmon with PMU name test didn't pass "true". Fix and
address issue with hwmon_pmu__config_terms needing to load events - a
load bearing assert fired. Also fix missing list deletion when putting
the hwmon test PMU and lower some debug warnings to make the hwmon PMU
less spammy in verbose mode.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241121000955.536930-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Ian Rogers [Tue, 19 Nov 2024 23:00:33 +0000 (15:00 -0800)]
perf hwmon_pmu: Ensure hwmon key union is zeroed before use
Non-zero values led to mismatches in testing. This was reproducible
with -fsanitize=undefined.
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Closes: https://lore.kernel.org/lkml/Zzdtj0PEWEX3ATwL@x1/
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241119230033.115369-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Arnaldo Carvalho de Melo [Tue, 19 Nov 2024 19:34:31 +0000 (16:34 -0300)]
perf tests hwmon_pmu: Remove double evlist__delete()
In the error path when failing to parse events the evlist is being
deleted twice, keep the one after the out label.
Fixes:
531ee0fd4836994f ("perf test: Add hwmon "PMU" test")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/ZzzoJNNcJJVnPCCe@x1
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Thomas Richter [Tue, 19 Nov 2024 06:48:56 +0000 (07:48 +0100)]
perf/test: fix perf ftrace test on s390
On s390 the perf test case ftrace sometimes fails as follows:
# ./perf test ftrace
79: perf ftrace tests : FAILED!
#
The failure depends on the kernel .config file. Some configurations
always work fine, some do not. The ftrace profile test mostly fails,
because the ring buffer was not large enough, and some lines
(especially the interesting ones with nanosleep in it) where dropped.
To achieve success for all tested kernel configurations, enlarge
the buffer to store the traces completely without wrapping.
The default buffer size is too small for all kernel configurations.
Set the buffer size of for the ftrace profile test to 16 MB.
Output after:
# ./perf test ftrace
79: perf ftrace tests : Ok
#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: agordeev@linux.ibm.com
Cc: gor@linux.ibm.com
Cc: hca@linux.ibm.com
Cc: sumanthk@linux.ibm.com
Link: https://lore.kernel.org/r/20241119064856.641446-1-tmricht@linux.ibm.com
Suggested-by: Sven Schnelle <svens@linux.ibm.com>
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Hao Ge [Wed, 13 Nov 2024 03:05:37 +0000 (11:05 +0800)]
perf bpf-filter: Return -ENOMEM directly when pfi allocation fails
Directly return -ENOMEM when pfi allocation fails,
instead of performing other operations on pfi.
Fixes:
0fe2b18ddc40 ("perf bpf-filter: Support multiple events properly")
Signed-off-by: Hao Ge <gehao@kylinos.cn>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: hao.ge@linux.dev
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20241113030537.26732-1-hao.ge@linux.dev
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Ian Rogers [Mon, 18 Nov 2024 05:26:38 +0000 (21:26 -0800)]
perf test: Correct hwmon test PMU detection
Use name to avoid potential other hwmon PMUs.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20241118052638.754981-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Dr. David Alan Gilbert [Tue, 22 Oct 2024 00:29:40 +0000 (01:29 +0100)]
perf: Remove unused del_perf_probe_events()
del_perf_probe_events() last use was removed by commit
3d6dfae889174340
("perf parse-events: Remove BPF event support")
Remove it.
It was the last user of probe_file__del_events(), so remove it as well.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241022002940.302946-1-linux@treblig.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Thu, 7 Nov 2024 16:20:35 +0000 (08:20 -0800)]
perf pmu: Move pmu_metrics_table__find and remove ARM override
Move pmu_metrics_table__find() to the jevents.py generated pmu-events.c
and remove indirection override for ARM.
The movement removes perf_pmu__find_metrics_table that exists to enable
the ARM override.
The ARM override isn't necessary as just the CPUID, not PMU, is used in
the metric table lookup.
On non-ARM the CPU argument is just ignored for the CPUID, for ARM -1 is
passed so that the CPUID for the first logical CPU is read.
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Xu Yang <xu.yang_2@nxp.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Zong-You Xie <ben717@andestech.com>
Cc: Benjamin Gray <bgray@linux.ibm.com>
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: Clément Le Goffic <clement.legoffic@foss.st.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-riscv@lists.infradead.org
Link: https://lore.kernel.org/r/20241107162035.52206-9-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Thu, 7 Nov 2024 16:20:34 +0000 (08:20 -0800)]
perf jevents: Add map_for_cpu()
The PMU is no longer part of the map finding process and for metrics
doesn't make sense as they lack a PMU.
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Xu Yang <xu.yang_2@nxp.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Zong-You Xie <ben717@andestech.com>
Cc: Benjamin Gray <bgray@linux.ibm.com>
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: Clément Le Goffic <clement.legoffic@foss.st.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-riscv@lists.infradead.org
Link: https://lore.kernel.org/r/20241107162035.52206-8-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Thu, 7 Nov 2024 16:20:33 +0000 (08:20 -0800)]
perf header: Pass a perf_cpu rather than a PMU to get_cpuid_str
On ARM the cpuid is dependent on the core type of the CPU in
question. The PMU was passed for the sake of the CPU map but this
means in places a temporary PMU is created just to pass a CPU
value. Just pass the CPU and fix up the callers.
As there are no longer PMU users in header.h, shuffle forward
declarations earlier to work around build failures.
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Xu Yang <xu.yang_2@nxp.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Zong-You Xie <ben717@andestech.com>
Cc: Benjamin Gray <bgray@linux.ibm.com>
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: Clément Le Goffic <clement.legoffic@foss.st.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-riscv@lists.infradead.org
Link: https://lore.kernel.org/r/20241107162035.52206-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Thu, 7 Nov 2024 16:20:32 +0000 (08:20 -0800)]
perf header: Avoid transitive PMU includes
Currently satisfied via header.h. Note, pmu.h includes parse-events.h.
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Xu Yang <xu.yang_2@nxp.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Zong-You Xie <ben717@andestech.com>
Cc: Benjamin Gray <bgray@linux.ibm.com>
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: Clément Le Goffic <clement.legoffic@foss.st.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-riscv@lists.infradead.org
Link: https://lore.kernel.org/r/20241107162035.52206-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Thu, 7 Nov 2024 16:20:31 +0000 (08:20 -0800)]
perf arm64 header: Use cpu argument in get_cpuid
Use the cpu to read the MIDR file requested. If the "any" value (-1) is
passed that keep the behavior of returning the first MIDR file that can
be read.
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Xu Yang <xu.yang_2@nxp.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Zong-You Xie <ben717@andestech.com>
Cc: Benjamin Gray <bgray@linux.ibm.com>
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: Clément Le Goffic <clement.legoffic@foss.st.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-riscv@lists.infradead.org
Link: https://lore.kernel.org/r/20241107162035.52206-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Thu, 7 Nov 2024 16:20:30 +0000 (08:20 -0800)]
perf header: Refactor get_cpuid to take a CPU for ARM
ARM BIG.little has no notion of a constant CPUID for both core
types. To reflect this reality, change the get_cpuid function to also
pass in a possibly unused logical cpu.
If the dummy value (-1) is passed in then ARM can, as currently happens,
select the first logical CPU's "CPUID".
The changes to ARM getcpuid happen in a follow up change.
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Xu Yang <xu.yang_2@nxp.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Zong-You Xie <ben717@andestech.com>
Cc: Benjamin Gray <bgray@linux.ibm.com>
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: Clément Le Goffic <clement.legoffic@foss.st.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-riscv@lists.infradead.org
Link: https://lore.kernel.org/r/20241107162035.52206-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Thu, 7 Nov 2024 16:20:29 +0000 (08:20 -0800)]
perf header: Move is_cpu_online to numa bench
The helper function is only used in the NUMA benchmark as typically
online CPUs are determined through perf_cpu_map__new_online_cpus().
Reduce the scope of the function for now.
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Xu Yang <xu.yang_2@nxp.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Zong-You Xie <ben717@andestech.com>
Cc: Benjamin Gray <bgray@linux.ibm.com>
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: Clément Le Goffic <clement.legoffic@foss.st.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-riscv@lists.infradead.org
Link: https://lore.kernel.org/r/20241107162035.52206-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Xu Yang [Thu, 7 Nov 2024 16:20:28 +0000 (08:20 -0800)]
perf jevents: fix breakage when do perf stat on system metric
When do perf stat on sys metric, perf tool output nothing now:
$ perf stat -a -M imx95_ddr_read.all -I 1000
$
This command runs on an arm64 machine and the Soc has one DDR hw pmu
except one armv8_cortex_a55 pmu. Their maps show as follows:
const struct pmu_events_map pmu_events_map[] = {
{
.arch = "arm64",
.cpuid = "0x00000000410fd050",
.event_table = {
.pmus = pmu_events__arm_cortex_a55,
.num_pmus = ARRAY_SIZE(pmu_events__arm_cortex_a55)
},
.metric_table = {
.pmus = NULL,
.num_pmus = 0
}
},
static const struct pmu_sys_events pmu_sys_event_tables[] = {
{
.event_table = {
.pmus = pmu_events__freescale_imx95_sys,
.num_pmus = ARRAY_SIZE(pmu_events__freescale_imx95_sys)
},
.metric_table = {
.pmus = pmu_metrics__freescale_imx95_sys,
.num_pmus = ARRAY_SIZE(pmu_metrics__freescale_imx95_sys)
},
.name = "pmu_events__freescale_imx95_sys",
},
Currently, pmu_metrics_table__find() will return NULL when only do perf
stat on sys metric. Then parse_groups() will never be called to parse
sys metric_name, finally perf tool will exit directly. This should be a
common problem.
To fix the issue, this will keep the logic before commit
f20c15d13f01
("perf pmu-events: Remember the perf_events_map for a PMU") to return a
empty metric table rather than a NULL pointer.
This should be fine since the removed part just check if the table match
provided metric_name. Without these code, the code in parse_groups()
will also check the validity of metrci_name too.
Fixes:
f20c15d13f017d4b ("perf pmu-events: Remember the perf_events_map for a PMU")
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Tested-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Benjamin Gray <bgray@linux.ibm.com>
Cc: Ben Zong-You Xie <ben717@andestech.com>
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: Clément Le Goffic <clement.legoffic@foss.st.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-riscv@lists.infradead.org
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20241107162035.52206-2-irogers@google.com
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Fri, 15 Nov 2024 20:12:58 +0000 (12:12 -0800)]
perf test: Add missing __exit calls in tool/hwmon tests
Address sanitizer flagged the missing parse_events_error__exit when
testing on ARM.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241115201258.509477-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
James Clark [Fri, 15 Nov 2024 16:15:59 +0000 (16:15 +0000)]
perf tests: Make leader sampling test work without branch event
Arm a57 only has speculative branch events so this test fails there. The
test doesn't depend on branch instructions so change it to instructions
which is pretty much guaranteed to be everywhere. The
test_branch_counter() test above already tests for the existence of the
branches event and skips if its not present.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Link: https://lore.kernel.org/r/20241115161600.228994-1-james.clark@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Dr. David Alan Gilbert [Sat, 16 Nov 2024 15:58:50 +0000 (15:58 +0000)]
perf util: Remove kernel version deadcode
fetch_kernel_version() has been unused since Ian's 2023 commit
3d6dfae889174340 ("perf parse-events: Remove BPF event support")
Remove it, and it's helpers.
I noticed there are a bunch of kernel-version macros that are also
unused nearby.
Also remove them.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241116155850.113129-1-linux@treblig.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Fri, 15 Nov 2024 15:18:21 +0000 (12:18 -0300)]
perf test shell trace_exit_race: Use --no-comm to avoid cases where COMM isn't resolved
The purpose of this test is to test for races in the exit of 'perf
trace' missing the last events, it was failing when the COMM wasn't
resolved either because we missed some PERF_RECORD_COMM or somehow
raced on getting it from procfs.
Add --no-comm to the 'perf trace' command line so that we get a
consistent, pid only output, which allows the test to achieve its goal.
This is the output from
'perf trace --no-comm -e syscalls:sys_enter_exit_group':
0.000 21953 syscalls:sys_enter_exit_group()
0.000 21955 syscalls:sys_enter_exit_group()
0.000 21957 syscalls:sys_enter_exit_group()
0.000 21959 syscalls:sys_enter_exit_group()
0.000 21961 syscalls:sys_enter_exit_group()
0.000 21963 syscalls:sys_enter_exit_group()
0.000 21965 syscalls:sys_enter_exit_group()
0.000 21967 syscalls:sys_enter_exit_group()
0.000 21969 syscalls:sys_enter_exit_group()
0.000 21971 syscalls:sys_enter_exit_group()
Now it passes:
root@number:~# perf test "trace exit race"
110: perf trace exit race : Ok
root@number:~#
root@number:~# perf test -v "trace exit race"
110: perf trace exit race : Ok
root@number:~#
If we artificially make it run just 9 times instead of the 10 it runs,
i.e. by manually doing:
trace_shutdown_race() {
for _ in $(seq 9); do
that 9 is $iter, 10 in the patch, we get:
root@number:~# vim ~acme/libexec/perf-core/tests/shell/trace_exit_race.sh
root@number:~# perf test -v "trace exit race"
--- start ---
test child forked, pid 24629
Missing output, expected 10 but only got 9
---- end(-1) ----
110: perf trace exit race : FAILED!
root@number:~#
I.e. 9 'perf trace' calls produced the expected output, the inverse grep
didn't show anything, so the patch provided by Howard for the previous
patch kicks in and shows a more informative message.
Tested-by: Howard Chu <howardchu95@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Benjamin Peterson <benjamin@engflow.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/lkml/ZzdknoHqrJbojb6P@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 14 Nov 2024 21:13:17 +0000 (18:13 -0300)]
perf test shell trace_exit_race: Show what went wrong in verbose mode
If it fails we need to check what was the reason, what were the lines
that didn't match the expected format, so:
root@number:~# perf test -v "trace exit race"
--- start ---
test child forked, pid
2028724
Lines not matching the expected regexp: ' +[0-9]+\.[0-9]+ +true/[0-9]+ syscalls:sys_enter_exit_group\(\)$':
0.000 :
2028750/
2028750 syscalls:sys_enter_exit_group()
---- end(-1) ----
110: perf trace exit race : FAILED!
root@number:~#
In this case we're not resolving the process COMM for some reason and
fallback to printing just the pid/tid, this will be fixed in a followup
patch.
Howard Chu spotted a problem with single code surrounding a regexp, that
made the test always fail, but since there were some failures when I
tested (COMM not being resolved in some of the results) the end inverse
grep would show some lines and thus didn't notice the single quote
problem.
He also provided a patch to test if less than the number of expected
matches took place but all of them with the expected output, in which
case the inverse grep wouldn't show anything, confusing the tester.
Reviewed-by: Howard Chu <howardchu95@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Benjamin Peterson <benjamin@engflow.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/lkml/ZzdknoHqrJbojb6P@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Benjamin Peterson [Thu, 7 Nov 2024 23:21:28 +0000 (23:21 +0000)]
perf tests: Add test for trace output loss
Add a test that checks that trace output is not lost to races. This is
accomplished by tracing the exit_group syscall of "true" multiple times and
checking for correct output.
Signed-off-by: Benjamin Peterson <benjamin@engflow.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Howard Chu <howardchu95@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241107232128.108981-3-benjamin@engflow.com
[ Addressed two ShellCheck warnings ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Benjamin Peterson [Thu, 7 Nov 2024 23:21:27 +0000 (23:21 +0000)]
perf trace: Avoid garbage when not printing a syscall's arguments
syscall__scnprintf_args may not place anything in the output buffer
(e.g., because the arguments are all zero). If that happened in
trace__fprintf_sys_enter, its fprintf would receive an unitialized
buffer leading to garbage output.
Fix the problem by passing the (possibly zero) bounds of the argument
buffer to the output fprintf.
Fixes:
a98392bb1e169a04 ("perf trace: Use beautifiers on syscalls:sys_enter_ handlers")
Signed-off-by: Benjamin Peterson <benjamin@engflow.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Howard Chu <howardchu95@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241107232128.108981-2-benjamin@engflow.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Benjamin Peterson [Thu, 7 Nov 2024 23:21:26 +0000 (23:21 +0000)]
perf trace: Do not lose last events in a race
If a perf trace event selector specifies a maximum number of events to output
(i.e., "/nr=N/" syntax), the event printing handler, trace__event_handler,
disables the event selector after the maximum number events are
printed.
Furthermore, trace__event_handler checked if the event selector was
disabled before doing any work. This avoided exceeding the maximum
number of events to print if more events were in the buffer before the
selector was disabled.
However, the event selector can be disabled for reasons other than
exceeding the maximum number of events. In particular, when the traced
subprocess exits, the main loop disables all event selectors. This meant
the last events of a traced subprocess might be lost to the printing
handler's short-circuiting logic.
This nondeterministic problem could be seen by running the following many times:
$ perf trace -e syscalls:sys_enter_exit_group true
trace__event_handler should simply check for exceeding the maximum number of
events to print rather than the state of the event selector.
Fixes:
a9c5e6c1e9bff42c ("perf trace: Introduce per-event maximum number of events property")
Signed-off-by: Benjamin Peterson <benjamin@engflow.com>
Tested-by: Howard Chu <howardchu95@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241107232128.108981-1-benjamin@engflow.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Masami Hiramatsu (Google) [Thu, 7 Nov 2024 14:52:49 +0000 (23:52 +0900)]
perf probe: Introduce quotation marks support
In non-C languages, it is possible to have ':' in the function names.
It is possible to escape it with backslashes, but if there are too many
backslashes, it is annoying.
This introduce quotation marks (`"` or `'`) support.
For example, without quotes, we have to pass it as below
$ perf probe -x cro3 -L "cro3\:\:cmd\:\:servo\:\:run_show"
<run_show@/work/cro3/src/cmd/servo.rs:0>
0 fn run_show(args: &ArgsShow) -> Result<()> {
1 let list = ServoList::discover()?;
2 let s = list.find_by_serial(&args.servo)?;
3 if args.json {
4 println!("{s}");
With quotes, we can more naturally write the function name as below;
$ perf probe -x cro3 -L \"cro3::cmd::servo::run_show\"
<run_show@/work/cro3/src/cmd/servo.rs:0>
0 fn run_show(args: &ArgsShow) -> Result<()> {
1 let list = ServoList::discover()?;
2 let s = list.find_by_serial(&args.servo)?;
3 if args.json {
4 println!("{s}");
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Lobakin <aleksander.lobakin@intel.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://lore.kernel.org/r/173099116941.2431889.11609129616090100386.stgit@mhiramat.roam.corp.google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Masami Hiramatsu (Google) [Thu, 7 Nov 2024 14:52:40 +0000 (23:52 +0900)]
perf string: Add strpbrk_esq() and strdup_esq() for escape and quote
strpbrk_esq() and strdup_esq() are new variants for strpbrk() and
strdup() which handles escaped characters and quoted strings.
- strpbrk_esq() searches specified set of characters but ignores the
escaped characters and quoted strings.
e.g. strpbrk_esq("'quote\d' \queue quiz", "qd") returns "quiz".
- strdup_esq() duplicates string but removes backslash and quotes which
is used for quotation. It also keeps the string (including backslash)
in the quoted part.
e.g. strdup_esq("'quote\d' \queue quiz") returns "quote\d queue quiz".
The (single, double) quotes in the quoted part should be escaped by
backslash. In this case, strdup_esq() removes that backslash.
The same quotes must be paired. If you use double quotation, you need
to use the double quotation to close the quoted part.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Lobakin <aleksander.lobakin@intel.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://lore.kernel.org/r/173099116045.2431889.15772916605719019533.stgit@mhiramat.roam.corp.google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Masami Hiramatsu (Google) [Thu, 7 Nov 2024 14:52:31 +0000 (23:52 +0900)]
perf probe: Accept FUNC@* to specify function name explicitly
In Golang, the function name will have the '.', and 'perf probe'
misinterprets it as a file name.
To mitigate this situation, introduce `function@*` so that user can
explicitly specify that it is a function name.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Lobakin <aleksander.lobakin@intel.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://lore.kernel.org/r/173099115149.2431889.13682110856853358354.stgit@mhiramat.roam.corp.google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Masami Hiramatsu (Google) [Thu, 7 Nov 2024 14:52:22 +0000 (23:52 +0900)]
perf probe: Fix to ignore escaped characters in --lines option
Use strbprk_esc() and strdup_esc() to ignore escaped characters in
--lines option. This has been done for other options, but only --lines
option doesn't.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Lobakin <aleksander.lobakin@intel.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://lore.kernel.org/r/173099114272.2431889.4820591557298941207.stgit@mhiramat.roam.corp.google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Masami Hiramatsu (Google) [Thu, 7 Nov 2024 14:52:13 +0000 (23:52 +0900)]
perf probe: Fix error message for failing to find line range
With --lines option, if perf-probe fails to find the specified line, it
warns as "Debuginfo analysis failed." but this misleads user as the
debuginfo is broken.
Fix this message to "Specified source line(LINESPEC) is not found." so
that user can understand the error correctly.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Lobakin <aleksander.lobakin@intel.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://lore.kernel.org/r/173099113381.2431889.16263147678401426107.stgit@mhiramat.roam.corp.google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Howard Chu [Wed, 30 Oct 2024 05:24:31 +0000 (22:24 -0700)]
perf trace: Fix tracing itself, creating feedback loops
There exists a pids_filtered map in augmented_raw_syscalls.bpf.c that
ceases to provide functionality after the BPF skeleton migration done
in:
5e6da6be3082f77b ("perf trace: Migrate BPF augmentation to use a skeleton")
Before the migration, pid_filtered map works, courtesy of Arnaldo
Carvalho de Melo <acme@kernel.org>:
⬢ [acme@toolbox perf-tools]$ git log --oneline -5
6f769c3458b6cf2d (HEAD) perf tests trace+probe_vfs_getname.sh: Accept quotes surrounding the filename
7777ac3dfe29f55d perf test trace+probe_vfs_getname.sh: Remove stray \ before /
33d9c5062113a4bd perf script python: Add stub for PMU symbol to the python binding
e59fea47f83e8a9a perf symbols: Fix DSO kernel load and symbol process to correctly map DSO to its long_name, type and adjust_symbols
878460e8d0ff84a0 perf build: Remove -Wno-unused-but-set-variable from the flex flags when building with clang < 13.0.0
root@x1:/home/acme/git/perf-tools# perf trace -e /tmp/augmented_raw_syscalls.o -e write* --max-events=30 &
[1] 180632
root@x1:/home/acme/git/perf-tools# 0.000 ( 0.051 ms): NetworkManager/1127 write(fd: 3, buf: 0x7ffeb508ef70, count: 8) = 8
0.115 ( 0.010 ms): NetworkManager/1127 write(fd: 3, buf: 0x7ffeb508ef70, count: 8) = 8
0.916 ( 0.068 ms): sudo/156867 write(fd: 8, buf: 0x55cb4cd2f650, count: 246) = 246
1.699 ( 0.047 ms): sudo/156867 write(fd: 8, buf: 0x55cb4cd2f650, count: 121) = 121
2.167 ( 0.041 ms): sudo/156867 write(fd: 8, buf: 0x55cb4cd2f650, count: 121) = 121
2.739 ( 0.042 ms): sudo/156867 write(fd: 8, buf: 0x55cb4cd2f650, count: 121) = 121
3.138 ( 0.027 ms): sudo/156867 write(fd: 8, buf: 0x55cb4cd2f650, count: 121) = 121
3.477 ( 0.027 ms): sudo/156867 write(fd: 8, buf: 0x55cb4cd2f650, count: 121) = 121
3.738 ( 0.023 ms): sudo/156867 write(fd: 8, buf: 0x55cb4cd2f650, count: 121) = 121
3.946 ( 0.024 ms): sudo/156867 write(fd: 8, buf: 0x55cb4cd2f650, count: 121) = 121
4.195 ( 0.024 ms): sudo/156867 write(fd: 8, buf: 0x55cb4cd2f650, count: 121) = 121
4.212 ( 0.026 ms): NetworkManager/1127 write(fd: 3, buf: 0x7ffeb508ef70, count: 8) = 8
4.285 ( 0.006 ms): NetworkManager/1127 write(fd: 3, buf: 0x7ffeb508ef70, count: 8) = 8
4.445 ( 0.018 ms): sudo/156867 write(fd: 8, buf: 0x55cb4cd2f650, count: 260) = 260
4.508 ( 0.009 ms): sudo/156867 write(fd: 8, buf: 0x55cb4cd2f650, count: 124) = 124
4.592 ( 0.010 ms): sudo/156867 write(fd: 8, buf: 0x55cb4cd2f650, count: 116) = 116
4.666 ( 0.009 ms): sudo/156867 write(fd: 8, buf: 0x55cb4cd2f650, count: 130) = 130
4.715 ( 0.010 ms): sudo/156867 write(fd: 8, buf: 0x55cb4cd2f650, count: 95) = 95
4.765 ( 0.007 ms): sudo/156867 write(fd: 8, buf: 0x55cb4cd2f650, count: 102) = 102
4.815 ( 0.009 ms): sudo/156867 write(fd: 8, buf: 0x55cb4cd2f650, count: 79) = 79
4.890 ( 0.008 ms): sudo/156867 write(fd: 8, buf: 0x55cb4cd2f650, count: 57) = 57
4.937 ( 0.007 ms): sudo/156867 write(fd: 8, buf: 0x55cb4cd2f650, count: 89) = 89
5.009 ( 0.010 ms): sudo/156867 write(fd: 8, buf: 0x55cb4cd2f650, count: 112) = 112
5.059 ( 0.010 ms): sudo/156867 write(fd: 8, buf: 0x55cb4cd2f650, count: 112) = 112
5.116 ( 0.007 ms): sudo/156867 write(fd: 8, buf: 0x55cb4cd2f650, count: 79) = 79
5.152 ( 0.009 ms): sudo/156867 write(fd: 8, buf: 0x55cb4cd2f650, count: 33) = 33
5.215 ( 0.008 ms): sudo/156867 write(fd: 8, buf: 0x55cb4cd2f650, count: 37) = 37
5.293 ( 0.010 ms): sudo/156867 write(fd: 8, buf: 0x55cb4cd2f650, count: 128) = 128
5.339 ( 0.009 ms): sudo/156867 write(fd: 8, buf: 0x55cb4cd2f650, count: 89) = 89
5.384 ( 0.008 ms): sudo/156867 write(fd: 8, buf: 0x55cb4cd2f650, count: 100) = 100
[1]+ Done perf trace -e /tmp/augmented_raw_syscalls.o -e write* --max-events=30
root@x1:/home/acme/git/perf-tools#
No events for the 'perf trace' (pid 180632), i.e. no feedback loop.
If we leave it running:
root@x1:/home/acme/git/perf-tools# perf trace -e /tmp/augmented_raw_syscalls.o -e landlock_add_rule &
[1] 181068
root@x1:/home/acme/git/perf-tools#
And then look at what maps it sets up:
root@x1:/home/acme/git/perf-tools# bpftool map | grep pids_filtered -A3
1190: hash name pids_filtered flags 0x0
key 4B value 1B max_entries 64 memlock 7264B
btf_id 1613
pids perf(181068)
root@x1:/home/acme/git/perf-tools#
And ask for dumping its contents:
We see that we are _also_ setting it to filter those:
root@x1:/home/acme/git/perf-tools# bpftool map dump id 1190
[{
"key": 181068,
"value": 1
},{
"key": 156801,
"value": 1
}
]
Now testing the migration commit:
perf $ git log
commit
5e6da6be3082f77be06894a1a94d52a90b4007dc (HEAD)
Author: Ian Rogers <irogers@google.com>
Date: Thu Aug 10 11:48:51 2023 -0700
perf trace: Migrate BPF augmentation to use a skeleton
perf $ ./perf trace -e write --max-events=10 & echo #!
[1]
1808653
perf $
0.000 ( 0.010 ms): :
1808671/
1808671 write(fd: 1, buf: 0x6003f5b26fc0, count: 11) = 11
0.162 ( ): perf/
1808653 write(fd: 2, buf: 0x7fffc2174e50, count: 11) ...
0.174 ( ): perf/
1808653 write(fd: 2, buf: 0x74ce21804563, count: 1) ...
0.184 ( ): perf/
1808653 write(fd: 2, buf: 0x57b936589052, count: 5)
The feedback loop is there.
Keep it running, look into the bpf map:
perf $ bpftool map | grep pids_filtered
10675: hash name pids_filtered flags 0x0
perf $ bpftool map dump id 10675
[]
The map is empty.
Now, this commit:
64917f4df048a064 ("perf trace: Use heuristic when deciding if a syscall tracepoint "const char *" field is really a string")
Temporarily fixed the feedback loop for perf trace -e write, that's
because before using the heuristic, write is hooked to sys_enter_openat:
perf $ git log
commit
83a0943b1870944612a8aa0049f910826ebfd4f7 (HEAD)
Author: Arnaldo Carvalho de Melo <acme@redhat.com>
Date: Thu Aug 17 12:11:51 2023 -0300
perf trace: Use the augmented_raw_syscall BPF skel only for tracing syscalls
perf $ ./perf trace -e write --max-events=10 -v 2>&1 | grep Reusing
Reusing "openat" BPF sys_enter augmenter for "write"
And after the heuristic fix, it's unaugmented:
perf $ git log
commit
64917f4df048a0649ea7901c2321f020e71e6f24 (HEAD)
Author: Arnaldo Carvalho de Melo <acme@redhat.com>
Date: Thu Aug 17 15:14:21 2023 -0300
perf trace: Use heuristic when deciding if a syscall tracepoint "const char *" field is really a string
perf $ ./perf trace -e write --max-events=10 -v 2>&1 | grep Reusing
perf $
After using the heuristic, write is hooked to syscall_unaugmented, which
returns 1.
SEC("tp/raw_syscalls/sys_enter")
int syscall_unaugmented(struct syscall_enter_args *args)
{
return 1;
}
If the BPF program returns 1, the tracepoint filter will filter it
(since the tracepoint filter for perf is correctly set), but before the
heuristic, when it was hooked to a sys_enter_openat(), which is a BPF
program that calls bpf_perf_event_output() and writes to the buffer, it
didn't get filtered, thus creating feedback loop. So switching write to
unaugmented accidentally fixed the problem.
But some syscalls are not so lucky, for example newfstatat:
perf $ ./perf trace -e newfstatat --max-events=100 & echo #!
[1]
2166948
457.718 ( ): perf/
2166948 newfstatat(dfd: CWD, filename: "/proc/self/ns/mnt", statbuf: 0x7fff0132a9f0) ...
457.749 ( ): perf/
2166948 newfstatat(dfd: CWD, filename: "/proc/
2166950/ns/mnt", statbuf: 0x7fff0132aa80) ...
457.962 ( ): perf/
2166948 newfstatat(dfd: CWD, filename: "/proc/self/ns/mnt", statbuf: 0x7fff0132a9f0) ...
Currently, write is augmented by the new BTF general augmenter (which
calls bpf_perf_event_output()). The problem, which luckily got fixed,
resurfaced, and that’s how it was discovered.
Fixes:
5e6da6be3082f77b ("perf trace: Migrate BPF augmentation to use a skeleton")
Signed-off-by: Howard Chu <howardchu95@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241030052431.2220130-1-howardchu95@gmail.com
[ Check if trace->skel is non-NULL, as it is only initialized if trace->trace_syscalls is set ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Luo Yifan [Mon, 11 Nov 2024 09:17:01 +0000 (17:17 +0800)]
libsubcmd: Move va_end() before exit
This patch makes a minor adjustment by moving the va_end call before
exit. Since the exit() function terminates the program, any code
after exit(128) (i.e., va_end(params)) is unreachable and thus not
executed. Placing va_end before exit ensures that the va_list is
properly cleaned up.
Signed-off-by: Luo Yifan <luoyifan@cmss.chinamobile.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20241111091701.275496-1-luoyifan@cmss.chinamobile.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Luo Yifan [Mon, 11 Nov 2024 09:52:09 +0000 (17:52 +0800)]
perf timechart: Remove redundant variable assignment
This patch makes a minor change that removes a redundant variable
assignment. The assignment before the for loop is duplicated by the
initialization within the loop header.
Signed-off-by: Luo Yifan <luoyifan@cmss.chinamobile.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241111095209.276332-1-luoyifan@cmss.chinamobile.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jean-Philippe Romain [Sat, 9 Nov 2024 02:58:01 +0000 (18:58 -0800)]
perf list: Fix topic and pmu_name argument order
Fix function definitions to match header file declaration. Fix two
callers to pass the arguments in the right order.
On Intel Tigerlake, before:
```
$ perf list -j|grep "\"Topic\""|sort|uniq
"Topic": "cache",
"Topic": "cpu",
"Topic": "floating point",
"Topic": "frontend",
"Topic": "memory",
"Topic": "other",
"Topic": "pfm icl",
"Topic": "pfm ix86arch",
"Topic": "pfm perf_raw",
"Topic": "pipeline",
"Topic": "tool",
"Topic": "uncore interconnect",
"Topic": "uncore memory",
"Topic": "uncore other",
"Topic": "virtual memory",
$ perf list -j|grep "\"Unit\""|sort|uniq
"Unit": "cache",
"Unit": "cpu",
"Unit": "cstate_core",
"Unit": "cstate_pkg",
"Unit": "i915",
"Unit": "icl",
"Unit": "intel_bts",
"Unit": "intel_pt",
"Unit": "ix86arch",
"Unit": "msr",
"Unit": "perf_raw",
"Unit": "power",
"Unit": "tool",
"Unit": "uncore_arb",
"Unit": "uncore_clock",
"Unit": "uncore_imc_free_running_0",
"Unit": "uncore_imc_free_running_1",
```
After:
```
$ perf list -j|grep "\"Topic\""|sort|uniq
"Topic": "cache",
"Topic": "floating point",
"Topic": "frontend",
"Topic": "memory",
"Topic": "other",
"Topic": "pfm icl",
"Topic": "pfm ix86arch",
"Topic": "pfm perf_raw",
"Topic": "pipeline",
"Topic": "tool",
"Topic": "uncore interconnect",
"Topic": "uncore memory",
"Topic": "uncore other",
"Topic": "virtual memory",
$ perf list -j|grep "\"Unit\""|sort|uniq
"Unit": "cpu",
"Unit": "cstate_core",
"Unit": "cstate_pkg",
"Unit": "i915",
"Unit": "icl",
"Unit": "intel_bts",
"Unit": "intel_pt",
"Unit": "ix86arch",
"Unit": "msr",
"Unit": "perf_raw",
"Unit": "power",
"Unit": "tool",
"Unit": "uncore_arb",
"Unit": "uncore_clock",
"Unit": "uncore_imc_free_running_0",
"Unit": "uncore_imc_free_running_1",
```
Fixes:
e5c6109f4813246a ("perf list: Reorganize to use callbacks to allow honouring command line options")
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Jean-Philippe Romain <jean-philippe.romain@foss.st.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Junhao He <hejunhao3@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241109025801.560378-1-irogers@google.com
[ I fixed the two callers and added it to Jean-Phillippe's original change. ]
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Andrew Kreimer [Fri, 8 Nov 2024 13:47:15 +0000 (15:47 +0200)]
perf tools: Fix typos Muliplier -> Multiplier
There are some typos in fprintf messages.
Fix them via codespell.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Andrew Kreimer <algonell@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241108134728.25515-1-algonell@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 11 Nov 2024 15:17:34 +0000 (12:17 -0300)]
perf disasm: Allow configuring what disassemblers to use
The perf tools annotation code used for a long time parsing the output
of binutils's objdump (or its reimplementations, like llvm's) to then
parse and augment it with samples, allow navigation, etc.
More recently disassemblers from the capstone and llvm (libraries, not
parsing the output of tools using those libraries to mimic binutils's
objdump output) were introduced.
So when all those methods are available, there is a static preference
for a series of attempts of disassembling a binary, with the 'llvm,
capstone, objdump' sequence being hard coded.
This patch allows users to change that sequence, specifying via a 'perf
config' 'annotate.disassemblers' entry which and in what order
disassemblers should be attempted.
As alluded to in the comments in the source code of this series, this
flexibility is useful for users and developers alike, elliminating the
requirement to rebuild the tool with some specific set of libraries to
see how the output of disassembling would be for one of these methods.
root@x1:~# rm -f ~/.perfconfig
root@x1:~# perf annotate -v --stdio2 update_load_avg
<SNIP>
symbol__disassemble:
filename=/usr/lib/debug/lib/modules/6.11.4-201.fc40.x86_64/vmlinux,
sym=update_load_avg, start=0xffffffffb6148fe0, en>
annotating [0x6ff7170]
/usr/lib/debug/lib/modules/6.11.4-201.fc40.x86_64/vmlinux :
[0x7407ca0] update_load_avg
Disassembled with llvm
annotate.disassemblers=llvm,capstone,objdump
Samples: 66 of event 'cpu_atom/cycles/P', 10000 Hz,
Event count (approx.):
5185444, [percent: local period]
update_load_avg()
/usr/lib/debug/lib/modules/6.11.4-201.fc40.x86_64/vmlinux
Percent 0xffffffff81148fe0 <update_load_avg>:
1.61 pushq %r15
pushq %r14
1.00 pushq %r13
movl %edx,%r13d
1.90 pushq %r12
pushq %rbp
movq %rsi,%rbp
pushq %rbx
movq %rdi,%rbx
subq $0x18,%rsp
15.14 movl 0x1a4(%rdi),%eax
root@x1:~# perf config annotate.disassemblers=capstone
root@x1:~# cat ~/.perfconfig
# this file is auto-generated.
[annotate]
disassemblers = capstone
root@x1:~#
root@x1:~# perf annotate -v --stdio2 update_load_avg
<SNIP>
Disassembled with capstone
annotate.disassemblers=capstone
Samples: 66 of event 'cpu_atom/cycles/P', 10000 Hz,
Event count (approx.):
5185444, [percent: local period]
update_load_avg()
/usr/lib/debug/lib/modules/6.11.4-201.fc40.x86_64/vmlinux
Percent 0xffffffff81148fe0 <update_load_avg>:
1.61 pushq %r15
pushq %r14
1.00 pushq %r13
movl %edx,%r13d
1.90 pushq %r12
pushq %rbp
movq %rsi,%rbp
pushq %rbx
movq %rdi,%rbx
subq $0x18,%rsp
15.14 movl 0x1a4(%rdi),%eax
root@x1:~# perf config annotate.disassemblers=objdump,capstone
root@x1:~# perf config annotate.disassemblers
annotate.disassemblers=objdump,capstone
root@x1:~# cat ~/.perfconfig
# this file is auto-generated.
[annotate]
disassemblers = objdump,capstone
root@x1:~# perf annotate -v --stdio2 update_load_avg
Executing: objdump --start-address=0xffffffff81148fe0 \
--stop-address=0xffffffff811497aa \
-d --no-show-raw-insn -S -C "$1"
Disassembled with objdump
annotate.disassemblers=objdump,capstone
Samples: 66 of event 'cpu_atom/cycles/P', 10000 Hz,
Event count (approx.):
5185444, [percent: local period]
update_load_avg()
/usr/lib/debug/lib/modules/6.11.4-201.fc40.x86_64/vmlinux
Percent
Disassembly of section .text:
ffffffff81148fe0 <update_load_avg>:
#define DO_ATTACH 0x4
ffffffff81148fe0 <update_load_avg>:
#define DO_ATTACH 0x4
#define DO_DETACH 0x8
/* Update task and its cfs_rq load average */
static inline void update_load_avg(struct cfs_rq *cfs_rq,
struct sched_entity *se,
int flags)
{
1.61 push %r15
push %r14
1.00 push %r13
mov %edx,%r13d
1.90 push %r12
push %rbp
mov %rsi,%rbp
push %rbx
mov %rdi,%rbx
sub $0x18,%rsp
}
/* rq->task_clock normalized against any time
this cfs_rq has spent throttled */
static inline u64 cfs_rq_clock_pelt(struct cfs_rq *cfs_rq)
{
if (unlikely(cfs_rq->throttle_count))
15.14 mov 0x1a4(%rdi),%eax
root@x1:~#
After adding a way to select the disassembler from the command line a
'perf test' comparing the output of the various diassemblers should be
introduced, to test these codebases.
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Link: https://lore.kernel.org/r/20241111151734.1018476-4-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 11 Nov 2024 15:17:33 +0000 (12:17 -0300)]
perf disasm: Define stubs for the LLVM and capstone disassemblers
This reduces the number of ifdefs in the main symbol__disassemble()
method and paves the way for allowing the user to configure the
disassemblers of preference.
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Aditya Bodkhe <Aditya.Bodkhe1@ibm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Link: https://lore.kernel.org/r/20241111151734.1018476-3-acme@kernel.org
[ Applied fixes from Masami Hiramatsu and Aditya Bodkhe for when capstone devel files are not available ]
Link: https://lore.kernel.org/r/B78FB6DF-24E9-4A3C-91C9-535765EC0E2A@ibm.com
Link: https://lore.kernel.org/r/173145729034.2747044.453926054000880254.stgit@mhiramat.roam.corp.google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 11 Nov 2024 15:17:32 +0000 (12:17 -0300)]
perf disasm: Introduce symbol__disassemble_objdump()
With the first disassemble method in perf, the parsing of objdump
output, just like we have for llvm and capstone.
This paves the way to allow the user to specify what disassemblers are
preferred and to also to at some point allow building without the
objdump method.
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Link: https://lore.kernel.org/r/20241111151734.1018476-2-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Fri, 8 Nov 2024 23:46:05 +0000 (15:46 -0800)]
perf build: Remove PERF_HAVE_DWARF_REGS
PERF_HAVE_DWARF_REGS was true when an architecture had a dwarf-regs.c
file. There are no more architecture dwarf-regs.c files, selection is
done using constants from the ELF file rather than conditional
compilation. When removing PERF_HAVE_DWARF_REGS was the only variable
in the Makefile, remove the Makefile.
Add missing SPDX for RISC-V Makefile.
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Anup Patel <anup@brainfault.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Shenlin Liang <liangshenlin@eswincomputing.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Guilherme Amadio <amadio@gentoo.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Alexander Lobakin <aleksander.lobakin@intel.com>
Cc: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Chen Pei <cp0613@linux.alibaba.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Aditya Gupta <adityag@linux.ibm.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-riscv@lists.infradead.org
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Atish Patra <atishp@rivosinc.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: linux-csky@vger.kernel.org
Link: https://lore.kernel.org/r/20241108234606.429459-21-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Ian Rogers [Fri, 8 Nov 2024 23:46:04 +0000 (15:46 -0800)]
perf dwarf-regs: Remove get_arch_regstr code
get_arch_regstr no longer exists so remove declaration. Associated ifs
and switches are made unconditional.
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Anup Patel <anup@brainfault.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Shenlin Liang <liangshenlin@eswincomputing.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Guilherme Amadio <amadio@gentoo.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Alexander Lobakin <aleksander.lobakin@intel.com>
Cc: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Chen Pei <cp0613@linux.alibaba.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Aditya Gupta <adityag@linux.ibm.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-riscv@lists.infradead.org
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Atish Patra <atishp@rivosinc.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: linux-csky@vger.kernel.org
Link: https://lore.kernel.org/r/20241108234606.429459-20-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Ian Rogers [Fri, 8 Nov 2024 23:46:03 +0000 (15:46 -0800)]
perf xtensa: Remove dwarf-regs.c
The file just provides the function get_arch_regstr, however, if in
the only caller get_dwarf_regstr EM_HOST is used for the EM_NONE case
the function can never be called. So remove as dead code. As this is
the only file in the arch/xtensa/util clean up Build files. Tidy up the
EM_NONE cases for xtensa in dwarf-regs.c.
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Anup Patel <anup@brainfault.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Shenlin Liang <liangshenlin@eswincomputing.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Guilherme Amadio <amadio@gentoo.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Alexander Lobakin <aleksander.lobakin@intel.com>
Cc: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Chen Pei <cp0613@linux.alibaba.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Aditya Gupta <adityag@linux.ibm.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-riscv@lists.infradead.org
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Atish Patra <atishp@rivosinc.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: linux-csky@vger.kernel.org
Link: https://lore.kernel.org/r/20241108234606.429459-19-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Ian Rogers [Fri, 8 Nov 2024 23:46:02 +0000 (15:46 -0800)]
perf sparc: Remove dwarf-regs.c
The file just provides the function get_arch_regstr, however, if in
the only caller get_dwarf_regstr EM_HOST is used for the EM_NONE case
the function can never be called. So remove as dead code. As this is
the only file in the arch/sparc/util clean up Build files. Tidy up the
EM_NONE cases for sparc in dwarf-regs.c.
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Anup Patel <anup@brainfault.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Shenlin Liang <liangshenlin@eswincomputing.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Guilherme Amadio <amadio@gentoo.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Alexander Lobakin <aleksander.lobakin@intel.com>
Cc: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Chen Pei <cp0613@linux.alibaba.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Aditya Gupta <adityag@linux.ibm.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-riscv@lists.infradead.org
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Atish Patra <atishp@rivosinc.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: linux-csky@vger.kernel.org
Link: https://lore.kernel.org/r/20241108234606.429459-18-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Ian Rogers [Fri, 8 Nov 2024 23:46:01 +0000 (15:46 -0800)]
perf sh: Remove dwarf-regs.c
The file just provides the function get_arch_regstr, however, if in
the only caller get_dwarf_regstr EM_HOST is used for the EM_NONE case
the function can never be called. So remove as dead code. As this is
the only file in the arch/sh/util clean up Build files. Tidy up the
EM_NONE cases for sh in dwarf-regs.c.
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Anup Patel <anup@brainfault.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Shenlin Liang <liangshenlin@eswincomputing.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Guilherme Amadio <amadio@gentoo.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Alexander Lobakin <aleksander.lobakin@intel.com>
Cc: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Chen Pei <cp0613@linux.alibaba.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Aditya Gupta <adityag@linux.ibm.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-riscv@lists.infradead.org
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Atish Patra <atishp@rivosinc.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: linux-csky@vger.kernel.org
Link: https://lore.kernel.org/r/20241108234606.429459-17-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Ian Rogers [Fri, 8 Nov 2024 23:46:00 +0000 (15:46 -0800)]
perf s390: Remove dwarf-regs.c
The file just provides the function get_arch_regstr, however, if in
the only caller get_dwarf_regstr EM_HOST is used for the EM_NONE case
the function can never be called. So remove as dead code. Tidy up the
EM_NONE cases for s390 in dwarf-regs.c.
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Anup Patel <anup@brainfault.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Shenlin Liang <liangshenlin@eswincomputing.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Guilherme Amadio <amadio@gentoo.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Alexander Lobakin <aleksander.lobakin@intel.com>
Cc: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Chen Pei <cp0613@linux.alibaba.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Aditya Gupta <adityag@linux.ibm.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-riscv@lists.infradead.org
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Atish Patra <atishp@rivosinc.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: linux-csky@vger.kernel.org
Link: https://lore.kernel.org/r/20241108234606.429459-16-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Ian Rogers [Fri, 8 Nov 2024 23:45:59 +0000 (15:45 -0800)]
perf riscv: Remove dwarf-regs.c and add dwarf-regs-table.h
The file just provides the function get_arch_regstr, however, if in
the only caller get_dwarf_regstr EM_HOST is used for the EM_NONE case,
and the register table is provided in a header file, the function can
never be called. So remove as dead code. Tidy up the EM_NONE cases for
riscv in dwarf-regs.c.
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Anup Patel <anup@brainfault.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Shenlin Liang <liangshenlin@eswincomputing.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Guilherme Amadio <amadio@gentoo.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Alexander Lobakin <aleksander.lobakin@intel.com>
Cc: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Chen Pei <cp0613@linux.alibaba.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Aditya Gupta <adityag@linux.ibm.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-riscv@lists.infradead.org
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Atish Patra <atishp@rivosinc.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: linux-csky@vger.kernel.org
Link: https://lore.kernel.org/r/20241108234606.429459-15-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Ian Rogers [Fri, 8 Nov 2024 23:45:58 +0000 (15:45 -0800)]
perf dwarf-regs: Move powerpc dwarf-regs out of arch
Move arch/powerpc/util/dwarf-regs.c to util/dwarf-regs-powerpc.c and
compile in unconditionally. get_arch_regstr is redundant when EM_NONE
is treated as EM_HOST so remove and update dwarf-regs.c conditions.
Make get_powerpc_regs unconditionally available whwn libdw is.
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Anup Patel <anup@brainfault.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Shenlin Liang <liangshenlin@eswincomputing.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Guilherme Amadio <amadio@gentoo.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Alexander Lobakin <aleksander.lobakin@intel.com>
Cc: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Chen Pei <cp0613@linux.alibaba.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Aditya Gupta <adityag@linux.ibm.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-riscv@lists.infradead.org
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Atish Patra <atishp@rivosinc.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: linux-csky@vger.kernel.org
Link: https://lore.kernel.org/r/20241108234606.429459-14-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Ian Rogers [Fri, 8 Nov 2024 23:45:57 +0000 (15:45 -0800)]
perf mips: Remove dwarf-regs.c
The file just provides the function get_arch_regstr, however, if in
the only caller get_dwarf_regstr EM_HOST is used for the EM_NONE case
the function can never be called. So remove as dead code. Tidy up the
EM_NONE cases for mips in dwarf-regs.c.
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Anup Patel <anup@brainfault.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Shenlin Liang <liangshenlin@eswincomputing.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Guilherme Amadio <amadio@gentoo.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Alexander Lobakin <aleksander.lobakin@intel.com>
Cc: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Chen Pei <cp0613@linux.alibaba.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Aditya Gupta <adityag@linux.ibm.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-riscv@lists.infradead.org
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Atish Patra <atishp@rivosinc.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: linux-csky@vger.kernel.org
Link: https://lore.kernel.org/r/20241108234606.429459-13-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Ian Rogers [Fri, 8 Nov 2024 23:45:56 +0000 (15:45 -0800)]
perf loongarch: Remove dwarf-regs.c
The file just provides the function get_arch_regstr, however, if in
the only caller get_dwarf_regstr EM_HOST is used for the EM_NONE case
the function can never be called. So remove as dead code. Tidy up the
EM_NONE cases for loongarch in dwarf-regs.c.
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Anup Patel <anup@brainfault.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Shenlin Liang <liangshenlin@eswincomputing.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Guilherme Amadio <amadio@gentoo.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Alexander Lobakin <aleksander.lobakin@intel.com>
Cc: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Chen Pei <cp0613@linux.alibaba.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Aditya Gupta <adityag@linux.ibm.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-riscv@lists.infradead.org
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Atish Patra <atishp@rivosinc.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: linux-csky@vger.kernel.org
Link: https://lore.kernel.org/r/20241108234606.429459-12-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Ian Rogers [Fri, 8 Nov 2024 23:45:55 +0000 (15:45 -0800)]
perf dwarf-regs: Move csky dwarf-regs out of arch
Move arch/csky/util/dwarf-regs.c to util/dwarf-regs-csky.c and compile
in unconditionally. To avoid get_arch_regstr being duplicated, rename
to get_csky_regstr and add to get_dwarf_regstr switch.
Update #ifdefs to allow ABI V1 and V2 tables at the same
time. Determine the table from the ELF flags.
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Anup Patel <anup@brainfault.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Shenlin Liang <liangshenlin@eswincomputing.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Guilherme Amadio <amadio@gentoo.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Alexander Lobakin <aleksander.lobakin@intel.com>
Cc: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Chen Pei <cp0613@linux.alibaba.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Aditya Gupta <adityag@linux.ibm.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-riscv@lists.infradead.org
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Atish Patra <atishp@rivosinc.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: linux-csky@vger.kernel.org
Link: https://lore.kernel.org/r/20241108234606.429459-11-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Ian Rogers [Fri, 8 Nov 2024 23:45:54 +0000 (15:45 -0800)]
perf arm: Remove dwarf-regs.c
The file just provides the function get_arch_regstr, however, if in
the only caller get_dwarf_regstr EM_HOST is used for the EM_NONE case
the function can never be called. So remove as dead code. Tidy up the
EM_NONE cases for arm in dwarf-regs.c.
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Anup Patel <anup@brainfault.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Shenlin Liang <liangshenlin@eswincomputing.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Guilherme Amadio <amadio@gentoo.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Alexander Lobakin <aleksander.lobakin@intel.com>
Cc: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Chen Pei <cp0613@linux.alibaba.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Aditya Gupta <adityag@linux.ibm.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-riscv@lists.infradead.org
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Atish Patra <atishp@rivosinc.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: linux-csky@vger.kernel.org
Link: https://lore.kernel.org/r/20241108234606.429459-10-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Ian Rogers [Fri, 8 Nov 2024 23:45:53 +0000 (15:45 -0800)]
perf arm64: Remove dwarf-regs.c
The file just provides the function get_arch_regstr, however, if in
the only caller get_dwarf_regstr EM_HOST is used for the EM_NONE case
the function can never be called. So remove as dead code. Tidy up the
EM_NONE cases for arm64 in dwarf-regs.c.
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Anup Patel <anup@brainfault.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Shenlin Liang <liangshenlin@eswincomputing.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Guilherme Amadio <amadio@gentoo.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Alexander Lobakin <aleksander.lobakin@intel.com>
Cc: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Chen Pei <cp0613@linux.alibaba.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Aditya Gupta <adityag@linux.ibm.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-riscv@lists.infradead.org
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Atish Patra <atishp@rivosinc.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: linux-csky@vger.kernel.org
Link: https://lore.kernel.org/r/20241108234606.429459-9-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Ian Rogers [Fri, 8 Nov 2024 23:45:52 +0000 (15:45 -0800)]
perf dwarf-regs: Move x86 dwarf-regs out of arch
Move arch/x86/util/dwarf-regs.c to util/dwarf-regs-x86.c and compile
in unconditionally. To avoid get_arch_regnum being duplicated, rename
to get_x86_regnum and add to get_dwarf_regnum switch.
For get_arch_regstr, this was unused on x86 unless the machine type
was EM_NONE. Map that case to EM_HOST and remove get_arch_regstr from
dwarf-regs-x86.c.
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Anup Patel <anup@brainfault.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Shenlin Liang <liangshenlin@eswincomputing.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Guilherme Amadio <amadio@gentoo.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Alexander Lobakin <aleksander.lobakin@intel.com>
Cc: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Chen Pei <cp0613@linux.alibaba.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Aditya Gupta <adityag@linux.ibm.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-riscv@lists.infradead.org
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Atish Patra <atishp@rivosinc.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: linux-csky@vger.kernel.org
Link: https://lore.kernel.org/r/20241108234606.429459-8-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Ian Rogers [Fri, 8 Nov 2024 23:45:51 +0000 (15:45 -0800)]
perf dwarf-regs: Pass ELF flags to get_dwarf_regstr
Pass a flags value as architectures like csky need the flags to
determine the ABI variant.
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Anup Patel <anup@brainfault.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Shenlin Liang <liangshenlin@eswincomputing.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Guilherme Amadio <amadio@gentoo.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Alexander Lobakin <aleksander.lobakin@intel.com>
Cc: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Chen Pei <cp0613@linux.alibaba.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Aditya Gupta <adityag@linux.ibm.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-riscv@lists.infradead.org
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Atish Patra <atishp@rivosinc.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: linux-csky@vger.kernel.org
Link: https://lore.kernel.org/r/20241108234606.429459-7-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Ian Rogers [Fri, 8 Nov 2024 23:45:50 +0000 (15:45 -0800)]
perf dwarf-regs: Pass accurate disassembly machine to get_dwarf_regnum
Rather than pass 0/EM_NONE, use the value computed in the disasm
struct arch. Switch the EM_NONE case to EM_HOST, rewriting EM_NONE if
it were passed to get_dwarf_regnum. Pass a flags value as
architectures like csky need the flags to determine the ABI variant.
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Anup Patel <anup@brainfault.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Shenlin Liang <liangshenlin@eswincomputing.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Guilherme Amadio <amadio@gentoo.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Alexander Lobakin <aleksander.lobakin@intel.com>
Cc: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Chen Pei <cp0613@linux.alibaba.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Aditya Gupta <adityag@linux.ibm.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-riscv@lists.infradead.org
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Atish Patra <atishp@rivosinc.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: linux-csky@vger.kernel.org
Link: https://lore.kernel.org/r/20241108234606.429459-6-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Ian Rogers [Fri, 8 Nov 2024 23:45:49 +0000 (15:45 -0800)]
perf disasm: Add e_machine/e_flags to struct arch
Currently functions like get_dwarf_regnum only work with the host
architecture. Carry the elf machine and flags in struct arch so that
in disassembly these can be used to allow cross platform disassembly.
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Anup Patel <anup@brainfault.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Shenlin Liang <liangshenlin@eswincomputing.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Guilherme Amadio <amadio@gentoo.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Alexander Lobakin <aleksander.lobakin@intel.com>
Cc: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Chen Pei <cp0613@linux.alibaba.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Aditya Gupta <adityag@linux.ibm.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-riscv@lists.infradead.org
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Atish Patra <atishp@rivosinc.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: linux-csky@vger.kernel.org
Link: https://lore.kernel.org/r/20241108234606.429459-5-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Ian Rogers [Fri, 8 Nov 2024 23:45:48 +0000 (15:45 -0800)]
perf dwarf-regs: Add EM_HOST and EF_HOST defines
Computed from the build architecture defines, EM_HOST and EF_HOST give
values that can be used in dwarf register lookup. Place in
dwarf-regs.h so the value can be shared. Move some dwarf-regs.c
constants used for EM_HOST to dwarf-regs.h. Add CSky constants that
may be missing.
In disasm.c add an include of dwarf-regs.h as the included
arch/*/annotate/instructions.c files make use of the constants and we
want the elf.h/dwarf-regs.h dependency to be explicit.
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Anup Patel <anup@brainfault.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Shenlin Liang <liangshenlin@eswincomputing.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Guilherme Amadio <amadio@gentoo.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Alexander Lobakin <aleksander.lobakin@intel.com>
Cc: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Chen Pei <cp0613@linux.alibaba.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Aditya Gupta <adityag@linux.ibm.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-riscv@lists.infradead.org
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Atish Patra <atishp@rivosinc.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: linux-csky@vger.kernel.org
Link: https://lore.kernel.org/r/20241108234606.429459-4-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Ian Rogers [Fri, 8 Nov 2024 23:45:47 +0000 (15:45 -0800)]
perf dwarf-regs: Remove PERF_HAVE_ARCH_REGS_QUERY_REGISTER_OFFSET
PERF_HAVE_ARCH_REGS_QUERY_REGISTER_OFFSET was used for BPF prologue
support which was removed in Commit
3d6dfae88917 ("perf parse-events:
Remove BPF event support"). The code is no longer used so remove.
Remove the offset from various dwarf-regs.c tables and the dependence
on ptrace.h. Rename structs starting pt_ as the ptrace derived offset is
now removed.
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Anup Patel <anup@brainfault.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Shenlin Liang <liangshenlin@eswincomputing.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Guilherme Amadio <amadio@gentoo.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Alexander Lobakin <aleksander.lobakin@intel.com>
Cc: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Chen Pei <cp0613@linux.alibaba.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Aditya Gupta <adityag@linux.ibm.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-riscv@lists.infradead.org
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Atish Patra <atishp@rivosinc.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: linux-csky@vger.kernel.org
Link: https://lore.kernel.org/r/20241108234606.429459-3-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Ian Rogers [Fri, 8 Nov 2024 23:45:46 +0000 (15:45 -0800)]
perf bpf-prologue: Remove unused file
Commit
4a73fca22692 ("perf bpf-prologue: Remove unused file") missed
cleaning up the header file. The code was unnecessary as Commit
3d6dfae88917 ("perf parse-events: Remove BPF event support") removed
building bpf-prologue.c.
Fixes:
4a73fca22692 ("perf bpf-prologue: Remove unused file")
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Anup Patel <anup@brainfault.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Shenlin Liang <liangshenlin@eswincomputing.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Guilherme Amadio <amadio@gentoo.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Alexander Lobakin <aleksander.lobakin@intel.com>
Cc: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Chen Pei <cp0613@linux.alibaba.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Aditya Gupta <adityag@linux.ibm.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-riscv@lists.infradead.org
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Atish Patra <atishp@rivosinc.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: linux-csky@vger.kernel.org
Link: https://lore.kernel.org/r/20241108234606.429459-2-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Ian Rogers [Sat, 9 Nov 2024 00:37:59 +0000 (16:37 -0800)]
perf docs: Document tool and hwmon events
Add a few paragraphs on tool and hwmon events.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Yoshihiro Furudera <fj5100bi@fujitsu.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Junhao He <hejunhao3@huawei.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20241109003759.473460-8-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Ian Rogers [Sat, 9 Nov 2024 00:37:58 +0000 (16:37 -0800)]
perf test: Add hwmon "PMU" test
Based on a mix of the sysfs PMU test (for creating the reference
files) and the tool PMU test, test that parsing given hwmon events
with there aliases creates the expected config values.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Yoshihiro Furudera <fj5100bi@fujitsu.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Junhao He <hejunhao3@huawei.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20241109003759.473460-7-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Ian Rogers [Sat, 9 Nov 2024 00:37:57 +0000 (16:37 -0800)]
perf pmu: Add calls enabling the hwmon_pmu
Add the base PMU calls necessary for hwmon_pmu(s) to be
created/deleted and events found, listed, opened and read.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Yoshihiro Furudera <fj5100bi@fujitsu.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Junhao He <hejunhao3@huawei.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20241109003759.473460-6-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Ian Rogers [Sat, 9 Nov 2024 00:37:56 +0000 (16:37 -0800)]
perf hwmon_pmu: Add a tool PMU exposing events from hwmon in sysfs
Add a tool PMU for hwmon events but don't enable.
The hwmon sysfs ABI is defined in
Documentation/hwmon/sysfs-interface.rst. Create a PMU that reads the
hwmon input and can be used in `perf stat` and metrics much as an
uncore PMU can.
For example, when enabled by a later patch, the following shows
reading the CPU temperature and 2 fan speeds alongside the uncore
frequency:
```
$ perf stat -e temp_cpu,fan1,hwmon_thinkpad/fan2/,tool/num_cpus_online/ -M UNCORE_FREQ -I 1000
1.
001153138 52.00 'C temp_cpu
1.
001153138 2,588 rpm fan1
1.
001153138 2,482 rpm hwmon_thinkpad/fan2/
1.
001153138 8 tool/num_cpus_online/
1.
001153138 1,077,101,397 UNC_CLOCK.SOCKET # 1.08 UNCORE_FREQ
1.
001153138 1,012,773,595 duration_time
...
```
The PMUs are named from /sys/class/hwmon/hwmon<num>/name and have an
alias of hwmon<num>.
Hwmon data is presented in multiple <type><number>_<item> files. The
<type><number> is used to identify the event as is the <type> followed
by the contents of the <type>_label file if it exists. The
<type><number>_input file gives the data read by perf.
When enabled by a later patch, in `perf list` the other hwmon <item>
files are used to give a richer description, for example:
```
hwmon:
temp1
[Temperature in unit acpitz named temp1. Unit: hwmon_acpitz]
in0
[Voltage in unit bat0 named in0. Unit: hwmon_bat0]
temp_core_0 OR temp2
[Temperature in unit coretemp named Core 0. crit=100'C,max=100'C crit_alarm=0'C. Unit:
hwmon_coretemp]
temp_core_1 OR temp3
[Temperature in unit coretemp named Core 1. crit=100'C,max=100'C crit_alarm=0'C. Unit:
hwmon_coretemp]
...
temp_package_id_0 OR temp1
[Temperature in unit coretemp named Package id 0. crit=100'C,max=100'C crit_alarm=0'C.
Unit: hwmon_coretemp]
temp1
[Temperature in unit iwlwifi_1 named temp1. Unit: hwmon_iwlwifi_1]
temp_composite OR temp1
[Temperature in unit nvme named Composite. alarm=0'C,crit=86.85'C,max=75.85'C,
min=-273.15'C. Unit: hwmon_nvme]
temp_sensor_1 OR temp2
[Temperature in unit nvme named Sensor 1. max=65261.8'C,min=-273.15'C. Unit: hwmon_nvme]
temp_sensor_2 OR temp3
[Temperature in unit nvme named Sensor 2. max=65261.8'C,min=-273.15'C. Unit: hwmon_nvme]
fan1
[Fan in unit thinkpad named fan1. Unit: hwmon_thinkpad]
fan2
[Fan in unit thinkpad named fan2. Unit: hwmon_thinkpad]
...
temp_cpu OR temp1
[Temperature in unit thinkpad named CPU. Unit: hwmon_thinkpad]
temp_gpu OR temp2
[Temperature in unit thinkpad named GPU. Unit: hwmon_thinkpad]
curr1
[Current in unit ucsi_source_psy_usbc000_0 named curr1. max=1.5A. Unit:
hwmon_ucsi_source_psy_usbc000_0]
in0
[Voltage in unit ucsi_source_psy_usbc000_0 named in0. max=5V,min=5V. Unit:
hwmon_ucsi_source_psy_usbc000_0]
```
As there may be multiple hwmon devices a range of PMU types are
reserved for their use and to identify the PMU as belonging to the
hwmon types.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Yoshihiro Furudera <fj5100bi@fujitsu.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Junhao He <hejunhao3@huawei.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20241109003759.473460-5-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Ian Rogers [Sat, 9 Nov 2024 00:37:55 +0000 (16:37 -0800)]
perf test: Add hwmon filename parser test
Filename parsing maps a hwmon filename to constituent parts enum/int
parts for the hwmon config value. Add a test case for the parsing.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Yoshihiro Furudera <fj5100bi@fujitsu.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Junhao He <hejunhao3@huawei.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
[namhyung: add #include <linux/string.h> for strlcpy()]
Link: https://lore.kernel.org/r/20241109003759.473460-4-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Ian Rogers [Sat, 9 Nov 2024 00:37:54 +0000 (16:37 -0800)]
perf hwmon_pmu: Add hwmon filename parser
hwmon filenames have a specific encoding that will be used to give a
config value. The encoding is described in:
Documentation/hwmon/sysfs-interface.rst
Add a function to parse the filename into consituent enums/ints that
will then be amenable to config encoding.
Note, things are done this way to allow mapping names to config and
back without the use of hash/dynamic lookup tables.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Yoshihiro Furudera <fj5100bi@fujitsu.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Junhao He <hejunhao3@huawei.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
[namhyung: add #include <linux/string.h> for strlcpy()]
Link: https://lore.kernel.org/r/20241109003759.473460-3-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Ian Rogers [Sat, 9 Nov 2024 00:37:53 +0000 (16:37 -0800)]
tools api io: Ensure line_len_out is always initialized
Ensure initialization to avoid compiler warnings about potential use
of uninitialized variables.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Yoshihiro Furudera <fj5100bi@fujitsu.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Junhao He <hejunhao3@huawei.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20241109003759.473460-2-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Yicong Yang [Tue, 5 Nov 2024 10:56:49 +0000 (18:56 +0800)]
perf build: Include libtraceevent headers directly indicated by pkg-config
Currently the libtraceevent's found by pkg-config, which give the
include path as:
[root@localhost tmp]# pkg-config --cflags libtraceevent
-I/usr/local/include/traceevent
So we should include the libtraceevent headers directly without
"traceevent/" prefix. Update all the users.
Fixes:
0f0e1f445690 ("perf build: Use pkg-config for feature check for libtrace{event,fs}")
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/linux-perf-users/ZyF5_Hf1iL01kldE@google.com/
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Cc: leo.yan@arm.com
Cc: amadio@gentoo.org
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/20241105105649.45399-1-yangyicong@huawei.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Steve Clevenger [Fri, 8 Nov 2024 19:11:17 +0000 (12:11 -0700)]
perf script python: Adjust objdump start/end per map pgoff parameter
Extract map_pgoff parameter from the dictionary, and adjust start/end
range passed to objdump based on the value.
A zero start_addr is filtered to prevent output of dso address range
check failures. This script repeatedly sees a zero value passed
in for
start_addr = cpu_data[str(cpu) + 'addr']
These zero values are not a new problem. The start_addr/stop_addr warning
clutters the instruction trace output, hence this change.
Signed-off-by: Steve Clevenger <scclevenger@os.amperecomputing.com>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Cc: suzuki.poulose@arm.com
Cc: james.clark@linaro.org
Cc: mike.leach@linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: coresight@lists.linaro.org
Cc: ilkka@os.amperecomputing.com
Link: https://lore.kernel.org/r/21ccdd22e664bdeccb878672d4b2c0518873c1e5.1731027120.git.scclevenger@os.amperecomputing.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Steve Clevenger [Fri, 8 Nov 2024 19:11:18 +0000 (12:11 -0700)]
perf script cs_etm: Add map_pgoff to python dictionary
Extract map_pgoff parameter from the dictionary, and adjust start/end
range passed to objdump based on the value.
A zero start_addr is filtered to prevent output of dso address range
check failures. This script repeatedly sees a zero value passed
in for
start_addr = cpu_data[str(cpu) + 'addr']
These zero values are not a new problem. The start_addr/stop_addr warning
clutters the instruction trace output, hence this change.
Signed-off-by: Steve Clevenger <scclevenger@os.amperecomputing.com>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Cc: suzuki.poulose@arm.com
Cc: james.clark@linaro.org
Cc: mike.leach@linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: coresight@lists.linaro.org
Cc: ilkka@os.amperecomputing.com
Link: https://lore.kernel.org/r/8d9a1142dc58ffa34a000cb7b7a26055df0a37ec.1731027120.git.scclevenger@os.amperecomputing.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Ian Rogers [Wed, 6 Nov 2024 00:48:18 +0000 (16:48 -0800)]
perf stat: Expand metric+unit buffer size
Long metric names combined with units may exceed the metric_bf and
lead to truncation. Double metric_bf in size to avoid this.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20241106004818.2174593-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Haiyue Wang [Wed, 6 Nov 2024 12:12:14 +0000 (20:12 +0800)]
perf tools: Add the empty-pmu-events build to .gitignore
The commit
0fe881f10ceb ("perf jevents: Autogenerate empty-pmu-events.c")
build will generate two files, add them to .gitignore:
tools/perf/pmu-events/empty-pmu-events.log
tools/perf/pmu-events/test-empty-pmu-events.c
Signed-off-by: Haiyue Wang <haiyuewa@163.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20241106121254.2869-1-haiyuewa@163.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Dr. David Alan Gilbert [Wed, 6 Nov 2024 14:48:26 +0000 (14:48 +0000)]
perf: event: Remove deadcode
event_format__print() last use was removed by 2017's
commit
894f3f1732cb ("perf script: Use event_format__fprintf()")
evlist__find_tracepoint_by_id() last use was removed by 2012's
commit
e60fc847cefa ("perf evlist: Remove some unused methods")
evlist__set_tp_filter_pid() last use was removed by 2017's
commit
dd1a50377c92 ("perf trace: Introduce filter_loop_pids()")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20241106144826.91728-1-linux@treblig.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Benjamin Peterson [Sun, 3 Nov 2024 20:48:16 +0000 (20:48 +0000)]
perf trace: avoid garbage when not printing a trace event's arguments
trace__fprintf_tp_fields may not print any tracepoint arguments. E.g., if the
argument values are all zero. Previously, this would result in a totally
uninitialized buffer being passed to fprintf, which could lead to garbage on the
console. Fix the problem by passing the number of initialized bytes fprintf.
Fixes:
f11b2803bb88 ("perf trace: Allow choosing how to augment the tracepoint arguments")
Signed-off-by: Benjamin Peterson <benjamin@engflow.com>
Tested-by: Howard Chu <howardchu95@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20241103204816.7834-1-benjamin@engflow.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Namhyung Kim [Sat, 2 Nov 2024 23:17:02 +0000 (16:17 -0700)]
perf test: Fix ftrace test with regex patterns
During the parallel testing, I've noticed some ftrace test failures. It
seems the regex pattern checks 100 msec of nanosleep with the error
range of 10 msec. But sometimes it's affected by other processes and
resulted in more time in the syscall.
The following output shows that it took more than 120 msec and failed.
Let's update the regex pattern so that it can allow more drifts.
perf ftrace profile test
# Total (us) Avg (us) Max (us) Count Function
121279.500 121279.500 121279.500 1 __x64_sys_clock_nanosleep
121278.400 121278.400 121278.400 1 common_nsleep
121277.800 121277.800 121277.800 1 hrtimer_nanosleep
121277.100 121277.100 121277.100 1 do_nanosleep
341760.289 56960.048 121273.400 6 schedule
176.200 25.171 31.616 7 scheduler_tick
0.923 0.923 0.923 1 native_smp_send_reschedule
345522.360 69104.472 345320.600 5 __x64_sys_execve
345486.585 69097.317 345312.700 5 do_execveat_common.isra.0
340730.300 340730.300 340730.300 1 bprm_execve
1.758 0.879 0.883 2 sched_mm_cid_before_execve
1.112 1.112 1.112 1 sched_mm_cid_after_execve
---- end(-1) ----
81: perf ftrace tests : FAILED!
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20241102231702.2262258-1-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Arnaldo Carvalho de Melo [Mon, 4 Nov 2024 14:34:58 +0000 (11:34 -0300)]
perf test: Remove dangling CFLAGS for removed attr.o object
Since the C test wrapper for attr.py was removed we don't have an attr.o
object for that CFLAGS_attr.o to apply for, remove it.
Fixes:
3a447031f5fc21c4 ("perf test: Remove C test wrapper for attr.py")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/ZyjbksKYnV22zmz-@x1
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Charlie Jenkins [Mon, 4 Nov 2024 21:19:15 +0000 (13:19 -0800)]
perf tools: Add all shellcheck_log to gitignore
Instead of adding specific shellcheck_log files to the gitignore, add
all of them to prevent these files from cluttering the git status.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20241104-shellcheck_gitignore-v1-1-ffc179f57dc9@rivosinc.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Yicong Yang [Thu, 24 Oct 2024 13:32:36 +0000 (21:32 +0800)]
perf build: Add missing cflags when building with custom libtraceevent
When building with custom libtraceevent, below errors occur:
$ make -C tools/perf NO_LIBPYTHON=1 PKG_CONFIG_PATH=<custom libtraceevent>
In file included from util/session.h:5,
from builtin-buildid-list.c:17:
util/trace-event.h:153:10: fatal error: traceevent/event-parse.h: No such file or directory
153 | #include <traceevent/event-parse.h>
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
<snip similar errors of missing headers>
This is because the include path is missed in the cflags. Add it.
Fixes:
0f0e1f445690 ("perf build: Use pkg-config for feature check for libtrace{event,fs}")
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Guilherme Amadio <amadio@gentoo.org>
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/20241024133236.31016-1-yangyicong@huawei.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Michael Petlan [Fri, 1 Nov 2024 10:28:12 +0000 (11:28 +0100)]
perf test: Remove cpu-list BPF cgroup counter test
The cpu-list part of this testcase has proven itself to be unreliable.
Sometimes, we get "<not counted>" for system.slice when pinned to CPUs
0 and 1. In such case, the test fails.
Since we cannot simply guarantee that any system.slice load will run
on any arbitrary list of CPUs, except the whole set of all CPUs, let's
rather remove the cpu-list subtest.
Fixes:
a84260e314029e6dc9904fd ("perf test stat_bpf_counters_cgrp: Enhance perf stat cgroup BPF counter test")
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Cc: vmolnaro@redhat.com
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20241101102812.576425-1-mpetlan@redhat.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Ian Rogers [Mon, 28 Oct 2024 19:36:19 +0000 (12:36 -0700)]
perf build: Make libunwind opt-in rather than opt-out
Having multiple unwinding libraries makes the perf code harder to
understand and we have unused/untested code paths.
Perf made BPF support an opt-out rather than opt-in feature. As libbpf
has a libelf dependency, elfutils that provides libelf will also
provide libdw. When libdw is present perf will use libdw unwinding
rather than libunwind unwinding even if libunwind support is compiled
in.
Rather than have libunwind built into perf and never used, explicitly
disable the support and make it opt-in.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20241028193619.247727-1-irogers@google.com
Closes: https://lore.kernel.org/linux-perf-users/CAP-5=fUXkp-d7gkzX4eF+nbjb2978dZsiHZ9abGHN=BN1qAcbg@mail.gmail.com/
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Namhyung Kim [Mon, 4 Nov 2024 07:16:30 +0000 (23:16 -0800)]
Merge 'origin/master' into perf-tools-next
To get the fixes in the perf-tools branch. Resolved a conflict due to
RISC-V's syscall table change.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Linus Torvalds [Mon, 4 Nov 2024 00:05:52 +0000 (14:05 -1000)]
Linux 6.12-rc6
Linus Torvalds [Sun, 3 Nov 2024 20:25:05 +0000 (10:25 -1000)]
Merge tag 'mm-hotfixes-stable-2024-11-03-10-50' of git://git./linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"17 hotfixes. 9 are cc:stable. 13 are MM and 4 are non-MM.
The usual collection of singletons - please see the changelogs"
* tag 'mm-hotfixes-stable-2024-11-03-10-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: multi-gen LRU: use {ptep,pmdp}_clear_young_notify()
mm: multi-gen LRU: remove MM_LEAF_OLD and MM_NONLEAF_TOTAL stats
mm, mmap: limit THP alignment of anonymous mappings to PMD-aligned sizes
mm: shrinker: avoid memleak in alloc_shrinker_info
.mailmap: update e-mail address for Eugen Hristev
vmscan,migrate: fix page count imbalance on node stats when demoting pages
mailmap: update Jarkko's email addresses
mm: allow set/clear page_type again
nilfs2: fix potential deadlock with newly created symlinks
Squashfs: fix variable overflow in squashfs_readpage_block
kasan: remove vmalloc_percpu test
tools/mm: -Werror fixes in page-types/slabinfo
mm, swap: avoid over reclaim of full clusters
mm: fix PSWPIN counter for large folios swap-in
mm: avoid VM_BUG_ON when try to map an anon large folio to zero page.
mm/codetag: fix null pointer check logic for ref and tag
mm/gup: stop leaking pinned pages in low memory conditions
Linus Torvalds [Sun, 3 Nov 2024 20:19:34 +0000 (10:19 -1000)]
Merge tag 'phy-fixes-6.12' of git://git./linux/kernel/git/phy/linux-phy
Pull phy fixes from Vinod Koul:
- Qualcomm QMP driver fixes for null deref on suspend, bogus supplies
fix and reset entries fix
- BCM usb driver init array fix
- cadence array offset fix
- starfive link configuration fix
- config dependency fix for rockchip driver
- freescale reset signal fix before pll lock
- tegra driver fix for error pointer check
* tag 'phy-fixes-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: tegra: xusb: Add error pointer check in xusb.c
dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Fix X1E80100 resets entries
phy: freescale: imx8m-pcie: Do CMN_RST just before PHY PLL lock check
phy: phy-rockchip-samsung-hdptx: Depend on CONFIG_COMMON_CLK
phy: ti: phy-j721e-wiz: fix usxgmii configuration
phy: starfive: jh7110-usb: Fix link configuration to controller
phy: qcom: qmp-pcie: drop bogus x1e80100 qref supplies
phy: qcom: qmp-combo: move driver data initialisation earlier
phy: qcom: qmp-usbc: fix NULL-deref on runtime suspend
phy: qcom: qmp-usb-legacy: fix NULL-deref on runtime suspend
phy: qcom: qmp-usb: fix NULL-deref on runtime suspend
dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: add missing x1e80100 pipediv2 clocks
phy: usb: disable COMMONONN for dual mode
phy: cadence: Sierra: Fix offset of DEQ open eye algorithm control register
phy: usb: Fix missing elements in BCM4908 USB init array
Linus Torvalds [Sun, 3 Nov 2024 20:15:50 +0000 (10:15 -1000)]
Merge tag 'dmaengine-fix-6.12' of git://git./linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
- TI driver fix to set EOP for cyclic BCDMA transfers
- sh rz-dmac driver fix for handling config with zero address
* tag 'dmaengine-fix-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: ti: k3-udma: Set EOP for all TRs in cyclic BCDMA transfer
dmaengine: sh: rz-dmac: handle configs where one address is zero
Linus Torvalds [Sun, 3 Nov 2024 18:51:53 +0000 (08:51 -1000)]
Merge tag 'driver-core-6.12-rc6' of git://git./linux/kernel/git/gregkh/driver-core
Pull driver core revert from Greg KH:
"Here is a single driver core revert for 6.12-rc6. It reverts a change
that came in -rc1 that was supposed to resolve a reported problem, but
caused another one, so revert it for now so that we can get this all
worked out properly in 6.13.
The revert has been in linux-next all week with no reported issues"
* tag 'driver-core-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
Revert "driver core: Fix uevent_show() vs driver detach race"
Linus Torvalds [Sun, 3 Nov 2024 18:48:11 +0000 (08:48 -1000)]
Merge tag 'usb-6.12-rc6' of git://git./linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt fixes from Greg KH:
"Here are some small USB and Thunderbolt driver fixes for 6.12-rc6 that
have been sitting in my tree this week. Included in here are the
following:
- thunderbolt driver fixes for reported issues
- USB typec driver fixes
- xhci driver fixes for reported problems
- dwc2 driver revert for a broken change
- usb phy driver fix
- usbip tool fix
All of these have been in linux-next this week with no reported
issues"
* tag 'usb-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: tcpm: restrict SNK_WAIT_CAPABILITIES_TIMEOUT transitions to non self-powered devices
usb: phy: Fix API devm_usb_put_phy() can not release the phy
usb: typec: use cleanup facility for 'altmodes_node'
usb: typec: fix unreleased fwnode_handle in typec_port_register_altmodes()
usb: typec: qcom-pmic-typec: fix missing fwnode removal in error path
usb: typec: qcom-pmic-typec: use fwnode_handle_put() to release fwnodes
usb: acpi: fix boot hang due to early incorrect 'tunneled' USB3 device links
Revert "usb: dwc2: Skip clock gating on Broadcom SoCs"
xhci: Fix Link TRB DMA in command ring stopped completion event
xhci: Use pm_runtime_get to prevent RPM on unsupported systems
usbip: tools: Fix detach_port() invalid port error path
thunderbolt: Honor TMU requirements in the domain when setting TMU mode
thunderbolt: Fix KASAN reported stack out-of-bounds read in tb_retimer_scan()
Yu Zhao [Sat, 19 Oct 2024 01:29:39 +0000 (01:29 +0000)]
mm: multi-gen LRU: use {ptep,pmdp}_clear_young_notify()
When the MM_WALK capability is enabled, memory that is mostly accessed by
a VM appears younger than it really is, therefore this memory will be less
likely to be evicted. Therefore, the presence of a running VM can
significantly increase swap-outs for non-VM memory, regressing the
performance for the rest of the system.
Fix this regression by always calling {ptep,pmdp}_clear_young_notify()
whenever we clear the young bits on PMDs/PTEs.
[jthoughton@google.com: fix link-time error]
Link: https://lkml.kernel.org/r/20241019012940.3656292-3-jthoughton@google.com
Fixes:
bd74fdaea146 ("mm: multi-gen LRU: support page table walks")
Signed-off-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: James Houghton <jthoughton@google.com>
Reported-by: David Stevens <stevensd@google.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Matlack <dmatlack@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Wei Xu <weixugc@google.com>
Cc: <stable@vger.kernel.org>
Cc: kernel test robot <lkp@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Yu Zhao [Sat, 19 Oct 2024 01:29:38 +0000 (01:29 +0000)]
mm: multi-gen LRU: remove MM_LEAF_OLD and MM_NONLEAF_TOTAL stats
Patch series "mm: multi-gen LRU: Have secondary MMUs participate in
MM_WALK".
Today, the MM_WALK capability causes MGLRU to clear the young bit from
PMDs and PTEs during the page table walk before eviction, but MGLRU does
not call the clear_young() MMU notifier in this case. By not calling this
notifier, the MM walk takes less time/CPU, but it causes pages that are
accessed mostly through KVM / secondary MMUs to appear younger than they
should be.
We do call the clear_young() notifier today, but only when attempting to
evict the page, so we end up clearing young/accessed information less
frequently for secondary MMUs than for mm PTEs, and therefore they appear
younger and are less likely to be evicted. Therefore, memory that is
*not* being accessed mostly by KVM will be evicted *more* frequently,
worsening performance.
ChromeOS observed a tab-open latency regression when enabling MGLRU with a
setup that involved running a VM:
Tab-open latency histogram (ms)
Version p50 mean p95 p99 max
base 1315 1198 2347 3454 10319
mglru 2559 1311 7399 12060 43758
fix 1119 926 2470 4211 6947
This series replaces the final non-selftest patchs from this series[1],
which introduced a similar change (and a new MMU notifier) with KVM
optimizations. I'll send a separate series (to Sean and Paolo) for the
KVM optimizations.
This series also makes proactive reclaim with MGLRU possible for KVM
memory. I have verified that this functions correctly with the selftest
from [1], but given that that test is a KVM selftest, I'll send it with
the rest of the KVM optimizations later. Andrew, let me know if you'd
like to take the test now anyway.
[1]: https://lore.kernel.org/linux-mm/
20240926013506.860253-18-jthoughton@google.com/
This patch (of 2):
The removed stats, MM_LEAF_OLD and MM_NONLEAF_TOTAL, are not very helpful
and become more complicated to properly compute when adding
test/clear_young() notifiers in MGLRU's mm walk.
Link: https://lkml.kernel.org/r/20241019012940.3656292-1-jthoughton@google.com
Link: https://lkml.kernel.org/r/20241019012940.3656292-2-jthoughton@google.com
Fixes:
bd74fdaea146 ("mm: multi-gen LRU: support page table walks")
Signed-off-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: James Houghton <jthoughton@google.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Matlack <dmatlack@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: David Stevens <stevensd@google.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Wei Xu <weixugc@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Linus Torvalds [Sun, 3 Nov 2024 18:45:03 +0000 (08:45 -1000)]
Merge tag 'char-misc-6.12-rc6' of git://git./linux/kernel/git/gregkh/char-misc
Pull misc driver fixes from Greg KH:
"Here are some small char/misc/iio fixes for 6.12-rc6 that resolve
some reported issues. Included in here are the following:
- small IIO driver fixes for many reported issues
- mei driver fix for a suddenly much reported issue for an "old"
issue.
- MAINTAINERS update for a developer who has moved companies and
forgot to update their old entry.
All of these have been in linux-next this week with no reported
issues"
* tag 'char-misc-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
mei: use kvmalloc for read buffer
MAINTAINERS: add netup_unidvb maintainer
iio: dac: Kconfig: Fix build error for ltc2664
iio: adc: ad7124: fix division by zero in ad7124_set_channel_odr()
staging: iio: frequency: ad9832: fix division by zero in ad9832_calc_freqreg()
docs: iio: ad7380: fix supply for ad7380-4
iio: adc: ad7380: fix supplies for ad7380-4
iio: adc: ad7380: add missing supplies
iio: adc: ad7380: use devm_regulator_get_enable_read_voltage()
dt-bindings: iio: adc: ad7380: fix ad7380-4 reference supply
iio: light: veml6030: fix microlux value calculation
iio: gts-helper: Fix memory leaks for the error path of iio_gts_build_avail_scale_table()
iio: gts-helper: Fix memory leaks in iio_gts_build_avail_scale_table()
Linus Torvalds [Sun, 3 Nov 2024 18:35:29 +0000 (08:35 -1000)]
Merge tag 'input-for-v6.12-rc5' of git://git./linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a fix for regression in input core introduced in 6.11 preventing
re-registering input handlers
- a fix for adp5588-keys driver tyring to disable interrupt 0 at
suspend when devices is used without interrupt
- a fix for edt-ft5x06 to stop leaking regmap structure when probing
fails and to make sure it is not released too early on removal.
* tag 'input-for-v6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: fix regression when re-registering input handlers
Input: adp5588-keys - do not try to disable interrupt 0
Input: edt-ft5x06 - fix regmap leak when probe fails
Linus Torvalds [Sun, 3 Nov 2024 18:29:02 +0000 (08:29 -1000)]
Merge tag 'kbuild-fixes-v6.12-2' of git://git./linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix a memory leak in modpost
- Resolve build issues when cross-compiling RPM and Debian packages
- Fix another regression in Kconfig
- Fix incorrect MODULE_ALIAS() output in modpost
* tag 'kbuild-fixes-v6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
modpost: fix input MODULE_DEVICE_TABLE() built for 64-bit on 32-bit host
modpost: fix acpi MODULE_DEVICE_TABLE built with mismatched endianness
kconfig: show sub-menu entries even if the prompt is hidden
kbuild: deb-pkg: add pkg.linux-upstream.nokerneldbg build profile
kbuild: deb-pkg: add pkg.linux-upstream.nokernelheaders build profile
kbuild: rpm-pkg: disable kernel-devel package when cross-compiling
sumversion: Fix a memory leak in get_src_version()
Linus Torvalds [Sun, 3 Nov 2024 18:26:00 +0000 (08:26 -1000)]
Merge tag 'x86-urgent-2024-11-03' of git://git./linux/kernel/git/tip/tip
Pull x86 fix from Thomas Gleixner:
"A trivial compile test fix for x86:
When CONFIG_AMD_NB is not set a COMPILE_TEST of an AMD specific driver
fails due to a missing inline stub. Add the stub to cure it"
* tag 'x86-urgent-2024-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/amd_nb: Fix compile-testing without CONFIG_AMD_NB
Linus Torvalds [Sun, 3 Nov 2024 18:22:21 +0000 (08:22 -1000)]
Merge tag 'timers-urgent-2024-11-03' of git://git./linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"A single fix for posix CPU timers.
When a thread is cloned, the posix CPU timers are not inherited.
If the parent has a CPU timer armed the corresponding tick dependency
in the tasks tick_dep_mask is set and copied to the new thread, which
means the new thread and all decendants will prevent the system to go
into full NOHZ operation.
Clear the tick dependency mask in copy_process() to fix this"
* tag 'timers-urgent-2024-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-cpu-timers: Clear TICK_DEP_BIT_POSIX_TIMER on clone
Linus Torvalds [Sun, 3 Nov 2024 18:18:28 +0000 (08:18 -1000)]
Merge tag 'sched-urgent-2024-11-03' of git://git./linux/kernel/git/tip/tip
Pull scheduler fixes from Thomas Gleixner:
- Plug a race between pick_next_task_fair() and try_to_wake_up() where
both try to write to the same task, even though both paths hold a
runqueue lock, but obviously from different runqueues.
The problem is that the store to task::on_rq in __block_task() is
visible to try_to_wake_up() which assumes that the task is not
queued. Both sides then operate on the same task.
Cure it by rearranging __block_task() so the the store to task::on_rq
is the last operation on the task.
- Prevent a potential NULL pointer dereference in task_numa_work()
task_numa_work() iterates the VMAs of a process. A concurrent unmap
of the address space can result in a NULL pointer return from
vma_next() which is unchecked.
Add the missing NULL pointer check to prevent this.
- Operate on the correct scheduler policy in task_should_scx()
task_should_scx() returns true when a task should be handled by sched
EXT. It checks the tasks scheduling policy.
This fails when the check is done before a policy has been set.
Cure it by handing the policy into task_should_scx() so it operates
on the requested value.
- Add the missing handling of sched EXT in the delayed dequeue
mechanism. This was simply forgotten.
* tag 'sched-urgent-2024-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/ext: Fix scx vs sched_delayed
sched: Pass correct scheduling policy to __setscheduler_class
sched/numa: Fix the potential null pointer dereference in task_numa_work()
sched: Fix pick_next_task_fair() vs try_to_wake_up() race
Linus Torvalds [Sun, 3 Nov 2024 18:13:52 +0000 (08:13 -1000)]
Merge tag 'perf-urgent-2024-11-03' of git://git./linux/kernel/git/tip/tip
Pull perf fix from Thomas Gleixner:
"perf_event_clear_cpumask() uses list_for_each_entry_rcu() without
being in a RCU read side critical section, which triggers a
'suspicious RCU usage' warning.
It turns out that the list walk does not be RCU protected because the
write side lock is held in this context.
Change it to a regular list walk"
* tag 'perf-urgent-2024-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix missing RCU reader protection in perf_event_clear_cpumask()
Linus Torvalds [Sun, 3 Nov 2024 18:09:25 +0000 (08:09 -1000)]
Merge tag 'irq-urgent-2024-11-03' of git://git./linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
- Fix an off-by-one error in the failure path of msi_domain_alloc(),
which causes the cleanup loop to terminate early and leaking the
first allocated interrupt.
- Handle a corner case in GIC-V4 versus a lazily mapped Virtual
Processing Element (VPE). If the VPE has not been mapped because the
guest has not yet emitted a mapping command, then the set_affinity()
callback returns an error code, which causes the vCPU management to
fail.
Return success in this case without touching the hardware. This will
be done later when the guest issues the mapping command.
* tag 'irq-urgent-2024-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v4: Correctly deal with set_affinity on lazily-mapped VPEs
genirq/msi: Fix off-by-one error in msi_domain_alloc()
Masahiro Yamada [Sun, 3 Nov 2024 12:52:57 +0000 (21:52 +0900)]
modpost: fix input MODULE_DEVICE_TABLE() built for 64-bit on 32-bit host
When building a 64-bit kernel on a 32-bit build host, incorrect
input MODULE_ALIAS() entries may be generated.
For example, when compiling a 64-bit kernel with CONFIG_INPUT_MOUSEDEV=m
on a 64-bit build machine, you will get the correct output:
$ grep MODULE_ALIAS drivers/input/mousedev.mod.c
MODULE_ALIAS("input:b*v*p*e*-e*1,*2,*k*110,*r*0,*1,*a*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*2,*k*r*8,*a*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*3,*k*14A,*r*a*0,*1,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*3,*k*145,*r*a*0,*1,*18,*1C,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*3,*k*110,*r*a*0,*1,*m*l*s*f*w*");
However, building the same kernel on a 32-bit machine results in
incorrect output:
$ grep MODULE_ALIAS drivers/input/mousedev.mod.c
MODULE_ALIAS("input:b*v*p*e*-e*1,*2,*k*110,*130,*r*0,*1,*a*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*2,*k*r*8,*a*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*3,*k*14A,*16A,*r*a*0,*1,*20,*21,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*3,*k*145,*165,*r*a*0,*1,*18,*1C,*20,*21,*38,*3C,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*3,*k*110,*130,*r*a*0,*1,*20,*21,*m*l*s*f*w*");
A similar issue occurs with CONFIG_INPUT_JOYDEV=m. On a 64-bit build
machine, the output is:
$ grep MODULE_ALIAS drivers/input/joydev.mod.c
MODULE_ALIAS("input:b*v*p*e*-e*3,*k*r*a*0,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*3,*k*r*a*2,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*3,*k*r*a*8,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*3,*k*r*a*6,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*k*120,*r*a*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*k*130,*r*a*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*k*2C0,*r*a*m*l*s*f*w*");
However, on a 32-bit machine, the output is incorrect:
$ grep MODULE_ALIAS drivers/input/joydev.mod.c
MODULE_ALIAS("input:b*v*p*e*-e*3,*k*r*a*0,*20,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*3,*k*r*a*2,*22,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*3,*k*r*a*8,*28,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*3,*k*r*a*6,*26,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*k*11F,*13F,*r*a*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*k*11F,*13F,*r*a*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*k*2C0,*2E0,*r*a*m*l*s*f*w*");
When building a 64-bit kernel, BITS_PER_LONG is defined as 64. However,
on a 32-bit build machine, the constant 1L is a signed 32-bit value.
Left-shifting it beyond 32 bits causes wraparound, and shifting by 31
or 63 bits makes it a negative value.
The fix in commit
e0e92632715f ("[PATCH] PATCH: 1 line 2.6.18 bugfix:
modpost-64bit-fix.patch") is incorrect; it only addresses cases where
a 64-bit kernel is built on a 64-bit build machine, overlooking cases
on a 32-bit build machine.
Using 1ULL ensures a 64-bit width on both 32-bit and 64-bit machines,
avoiding the wraparound issue.
Fixes:
e0e92632715f ("[PATCH] PATCH: 1 line 2.6.18 bugfix: modpost-64bit-fix.patch")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Masahiro Yamada [Sun, 3 Nov 2024 12:46:50 +0000 (21:46 +0900)]
modpost: fix acpi MODULE_DEVICE_TABLE built with mismatched endianness
When CONFIG_SATA_AHCI_PLATFORM=m, modpost outputs incorect acpi
MODULE_ALIAS() if the endianness of the target and the build machine
do not match.
When the endianness of the target kernel and the build machine match,
the output is correct:
$ grep 'MODULE_ALIAS("acpi' drivers/ata/ahci_platform.mod.c
MODULE_ALIAS("acpi*:APMC0D33:*");
MODULE_ALIAS("acpi*:010601:*");
However, when building a little-endian kernel on a big-endian machine
(or vice versa), the output is incorrect:
$ grep 'MODULE_ALIAS("acpi' drivers/ata/ahci_platform.mod.c
MODULE_ALIAS("acpi*:APMC0D33:*");
MODULE_ALIAS("acpi*:0601??:*");
The 'cls' and 'cls_msk' fields are 32-bit.
DEF_FIELD() must be used instead of DEF_FIELD_ADDR() to correctly handle
endianness of these 32-bit fields.
The check 'if (cls)' was unnecessary; it never became NULL, as it was
the pointer to 'symval' plus the offset to the 'cls' field.
Fixes:
26095a01d359 ("ACPI / scan: Add support for ACPI _CLS device matching")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Dmitry Torokhov [Mon, 28 Oct 2024 05:31:15 +0000 (22:31 -0700)]
Input: fix regression when re-registering input handlers
Commit
d469647bafd9 ("Input: simplify event handling logic") introduced
code that would set handler->events() method to either
input_handler_events_filter() or input_handler_events_default() or
input_handler_events_null(), depending on the kind of input handler
(a filter or a regular one) we are dealing with. Unfortunately this
breaks cases when we try to re-register the same filter (as is the case
with sysrq handler): after initial registration the handler will have 2
event handling methods defined, and will run afoul of the check in
input_handler_check_methods():
input: input_handler_check_methods: only one event processing method can be defined (sysrq)
sysrq: Failed to register input handler, error -22
Fix this by adding handle_events() method to input_handle structure and
setting it up when registering a new input handle according to event
handling methods defined in associated input_handler structure, thus
avoiding modifying the input_handler structure.
Reported-by: "Ned T. Crigler" <crigler@gmail.com>
Reported-by: Christian Heusel <christian@heusel.eu>
Tested-by: "Ned T. Crigler" <crigler@gmail.com>
Tested-by: Peter Seiderer <ps.report@gmx.net>
Fixes:
d469647bafd9 ("Input: simplify event handling logic")
Link: https://lore.kernel.org/r/Zx2iQp6csn42PJA7@xavtug
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Linus Torvalds [Sat, 2 Nov 2024 19:27:11 +0000 (09:27 -1000)]
Merge tag 'nfsd-6.12-3' of git://git./linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Fix two async COPY bugs found during NFS bake-a-thon
- Fix an svcrdma memory leak
* tag 'nfsd-6.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
rpcrdma: Always release the rpcrdma_device's xa_array
NFSD: Never decrement pending_async_copies on error
NFSD: Initialize struct nfsd4_copy earlier
Linus Torvalds [Sat, 2 Nov 2024 19:22:16 +0000 (09:22 -1000)]
Merge tag 'xfs-6.12-fixes-6' of git://git./fs/xfs/xfs-linux
Pull xfs fixes from Carlos Maiolino:
- fix a sysbot reported crash on filestreams
- Reduce cpu time spent searching for extents in a very fragmented FS
- Check for delayed allocations before setting extsize
* tag 'xfs-6.12-fixes-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: streamline xfs_filestream_pick_ag
xfs: fix finding a last resort AG in xfs_filestream_pick_ag
xfs: Reduce unnecessary searches when searching for the best extents
xfs: Check for delayed allocations before setting extsize
Tengda Wu [Mon, 21 Oct 2024 11:02:01 +0000 (11:02 +0000)]
perf test: Use sqrtloop workload to test bperf event
Replace `brstack` workload with `sqrtloop` workload, because `sqrtloop`
workload contains fork(), which is suitable for testing the bperf event
inheritance feature.
Signed-off-by: Tengda Wu <wutengda@huaweicloud.com>
Cc: song@kernel.org
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20241021110201.325617-3-wutengda@huaweicloud.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tengda Wu [Mon, 21 Oct 2024 11:02:00 +0000 (11:02 +0000)]
perf stat: Support inherit events during fork() for bperf
bperf has a nice ability to share PMUs, but it still does not support
inherit events during fork(), resulting in some deviations in its stat
results compared with perf.
perf stat result:
$ ./perf stat -e cycles,instructions -- ./perf test -w sqrtloop
Performance counter stats for './perf test -w sqrtloop':
2,316,038,116 cycles
2,859,350,725 instructions
1.
009603637 seconds time elapsed
1.
004196000 seconds user
0.
003950000 seconds sys
bperf stat result:
$ ./perf stat --bpf-counters -e cycles,instructions -- \
./perf test -w sqrtloop
Performance counter stats for './perf test -w sqrtloop':
18,762,093 cycles
23,487,766 instructions
1.
008913769 seconds time elapsed
1.
003248000 seconds user
0.
004069000 seconds sys
In order to support event inheritance, two new bpf programs are added
to monitor the fork and exit of tasks respectively. When a task is
created, add it to the filter map to enable counting, and reuse the
`accum_key` of its parent task to count together with the parent task.
When a task exits, remove it from the filter map to disable counting.
After support:
$ ./perf stat --bpf-counters -e cycles,instructions -- \
./perf test -w sqrtloop
Performance counter stats for './perf test -w sqrtloop':
2,316,252,189 cycles
2,859,946,547 instructions
1.
009422314 seconds time elapsed
1.
003597000 seconds user
0.
004270000 seconds sys
Signed-off-by: Tengda Wu <wutengda@huaweicloud.com>
Cc: song@kernel.org
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20241021110201.325617-2-wutengda@huaweicloud.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
projects / linux-2.6-microblaze.git / log