mmc: core: convert comma to semicolon

Replace a comma between expression statements by a semicolon.

Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Link: https://lore.kernel.org/r/20201216131737.14883-1-zhengyongjun3@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: sdhci-pci-gli: Finetune HS400 RX delay for GL9763E

To improve the compatibility of GL9763E with HS400 eMMC cards,
finetune the RX delay of HS400 mode.

Signed-off-by: Renius Chen <reniuschengl@gmail.com>
Link: https://lore.kernel.org/r/20210111082249.17092-1-reniuschengl@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: sdhci-of-arasan: Use dev_err_probe() to avoid spamming logs

Using dev_err_probe() can avoid spamming logs when probe is deferred.
This function can also help to reduce code the size, uniform error handling
and simplify the code.

Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://lore.kernel.org/r/20210114152700.21916-5-muhammad.husaini.zulkifli@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: sdhci-of-arasan: Add structure device pointer in probe function

Add struct device *dev in probe func() so that it can widely use in
probe to make code more readable.

Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://lore.kernel.org/r/20210114152700.21916-4-muhammad.husaini.zulkifli@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: sdhci-of-arasan: Convert to use np instead of pdev->dev.of_node

Use np pointer to simplify code and improve readability.

Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://lore.kernel.org/r/20210114152700.21916-3-muhammad.husaini.zulkifli@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: sdhci-of-arasan: use of_device_get_match_data()

Use of_device_get_match_data() helper to get the match-data.

Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://lore.kernel.org/r/20210114152700.21916-2-muhammad.husaini.zulkifli@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: sdhci-pci-gli: Enlarge ASPM L1 entry delay of GL9763E

GL9763E enters ASPM L1 state after a very short idle in default,
even during a burst of request. So the R/W performance of GL9763E
is low with some platforms, which support ASPM mechanism, due to
entering ASPM L1 state very frequently in R/W process. Set the L1
entry delay bits in vendor-specific register to 0x3FF to enlarge
the idle period to 260us for improving the R/W performance
of GL9763E.

Signed-off-by: Renius Chen <reniuschengl@gmail.com>
Link: https://lore.kernel.org/r/20210115054736.27769-1-reniuschengl@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: core: remove redundant card null check to mmc_can_sleep()

Note that only _mmc_suspend() will call mmc_can_sleep(). And card is
checked before in mmc_can_poweroff_notify().

Signed-off-by: Yue Hu <huyue2@yulong.com>
Link: https://lore.kernel.org/r/20210115034506.646-1-zbestahu@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: core: remove needless err = 0 in mmc_init_card()

Since they will always being in successful path to return 0 directly,
no need to set err = 0.

Signed-off-by: Yue Hu <huyue2@yulong.com>
Link: https://lore.kernel.org/r/20210113113431.522-1-zbestahu@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: sdhci_am654: Add Support for TI's AM64 SoC

Add support for the controller present on the AM64x SoC.

There are instances:
sdhci0: 8bit bus width, max 400 MBps
sdhci1: 4bit bus width, max 100 MBps

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Link: https://lore.kernel.org/r/20210113115908.3882-3-a-govindraju@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

dt-bindings: mmc: sdhci-am654: Add compatible string for AM64 SoC

Add compatible string for AM64 SoC in device tree binding of AM654 SDHCI module
as the same IP is used.

Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210113115908.3882-2-a-govindraju@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: rtsx: add delay before power on

To make sure voltage is below 0.5V before power on during a power cycle,
add a delay of at least 100ms. The delays in the mmc core is not sufficient
for the rtsx pci device.

Signed-off-by: Ricky Wu <ricky_wu@realtek.com>
Link: https://lore.kernel.org/r/20210113105723.7916-1-ricky_wu@realtek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: sunxi-mmc: Ensure host is suspended during system sleep

If the device suspend process begins before the mmc host's autosuspend
timeout, the host will continue running during system sleep. Avoid
this by forcing runtime suspend during a global suspend transition.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20210113052421.36553-1-samuel@sholland.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: xenon: add AP807 compatible string

This patch adds new compatible string to differentiate
between the controllers versions included in the AP807
north bridge. Thanks to this change, the SoCs which use
AP807 will not run unintentionally in the 'slow mode'
with disabled UHS modes.

Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Link: https://lore.kernel.org/r/20210112094655.12274-3-kostap@marvell.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

dt-bindings: mmc: xenon: add AP807 compatible string

This patch adds DT binding description for the Xenon
SD/MMC controller included in AP807 north bridge.

Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Link: https://lore.kernel.org/r/20210112094655.12274-2-kostap@marvell.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: sdhci-of-arasan: Change code style of mapping the syscon field

Change code style of mapping the syscon in sdhci_arasan_update_support64b()
for readability and consistency.

Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20210111155001.12307-3-muhammad.husaini.zulkifli@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: sdhci-of-arasan: Fixed kernel-doc format warning

Commit 36c6aadaae86 ("mmc: sdhci-of-arasan: Add support for Intel Keem Bay")
introduces syscon map sdhci_arasan_update_support64b(). Unfortunately,
kernel-doc format script tool has not been run before and causing warning
on the documentation style.

Below is the output when running the kernel-doc script tool:
drivers/mmc/host/sdhci-of-arasan.c:1388: warning: contents before sections

Let's fix this by using standard conventions kernel-doc format.

Fixes: 36c6aadaae86 ("mmc: sdhci-of-arasan: Add support for Intel Keem Bay")
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20210111155001.12307-2-muhammad.husaini.zulkifli@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

dt-bindings: mmc: sdhci-msm: Document the SDX55 compatible

The SDHCI controller on SDX55 is based on MSM SDHCI v5 IP. Hence,
document the compatible with "qcom,sdhci-msm-v5" as the fallback.
While at it, let's also sort the compatibles in ascending order.

Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: linux-mmc@vger.kernel.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210107143118.2386-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: sdhci-pci-gli: Add a switch to enable/disable CQHCI support

Add a vendor-specific bit named GLI_9763E_MB_ERP_ON at the bit7 of
register 888h to decide whether to enhance random R/W performance
of GL9763E. CQHCI support will be enabled if and only if the bit is
set and the GLI_9763E_MB_CMQ_OFF bit is not set.

Signed-off-by: Renius Chen <reniuschengl@gmail.com>
Link: https://lore.kernel.org/r/20210106085332.5494-1-reniuschengl@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: rtsx: Add MMC_CAP2_NO_SDIO flag

Added flag MMC_CAP2_NO_SDIO to mmc->caps2
Card Reader not support SDIO

Signed-off-by: Ricky Wu <ricky_wu@realtek.com>
Link: https://lore.kernel.org/r/20201230090401.12627-2-ricky_wu@realtek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

dt-bindings: mmc: renesas,sdhi: Add r8a779a0 support

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20201227174202.40834-2-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: omap: remove unused struct component card_detect_irq

I have not found any user for this struct component.

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Link: https://lore.kernel.org/r/b6f2168b863e4273c6bca5a22fbd4a3a8ddf68d6.1608714110.git.hns@goldelico.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: jz4740: remove unused struct component card_detect_irq

I have not found any user for this struct component.

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/415ea1cb85eedc12f0c2f70da9a1ae3885bdd091.1608714110.git.hns@goldelico.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: renesas_sdhi: Add a condition of cmd/data timeout for retune

According to the datasheet, this controller needs retune when
cmd or data timeout happens. So, add a condition into .check_retune().

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/1608708622-29668-3-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: tmio: Add data timeout error detection

Currently, busy timeout is not checked for data transfer command. But,
if the temperature condition changes, the data cannot be acquired
correctly and timeout may occur. Also, we could reproduce an issue by
using mmc_test driver (e.g. "Correct xfer_size at write (start
failure)"). Therefore, this adds timeout error check.

Signed-off-by: Masaharu Hayakawa <masaharu.hayakawa.ry@renesas.com>
[saito: rework commit message.]
Signed-off-by: Takeshi Saito <takeshi.saito.xv@renesas.com>
[shimoda: rebase, add commit description]
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/1608708622-29668-2-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: meson-gx: check for scatterlist size alignment in block mode

Enable SGDMA support for SD_IO_RW_EXTENDED and add proper check
for scatterlist size alignment in block mode.

According to documentation, in SDIO block mode meson-gx DMA could
only handle buffers with sizes that are multiples of SDIO block size.

Some SDIO drivers like brcmfmac use scatterlist API, but do not enforce
proper scatterlist buffer size alignemnt, this looks like a root cause
of non-working CMD53.

Some minor style fixes.

Signed-off-by: Dmitry Lebed <lebed.dmitry@gmail.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20201218075312.67338-1-lebed.dmitry@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: mediatek: fix race condition between msdc_request_timeout and irq

when get request SW timeout, if CMD/DAT xfer done irq coming right now,
then there is race between the msdc_request_timeout work and irq handler,
and the host->cmd and host->data may set to NULL in irq handler. also,
current flow ensure that only one path can go to msdc_request_done(), so
no need check the return value of cancel_delayed_work().

Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
Link: https://lore.kernel.org/r/20201218071611.12276-1-chaotian.jing@mediatek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: renesas_internal_dmac: add pre_req and post_req support

Add pre_req and post_req support to improve performance.

Inspired by a patch in the BSP by Masaharu Hayakawa.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/1608114572-1892-3-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: renesas_sdhi_internal_dmac: Fix DMA buffer alignment from 8 to 128-bytes

According to the latest datasheet, the internal DMAC buffer alignment
R-Car Gen3 SDHI HW should be 128-bytes. So, fix it.

Signed-off-by: Takeshi Saito <takeshi.saito.xv@renesas.com>
[shimoda: revise commit description, rebase]
Fixes: 2a68ea7896e3 ("mmc: renesas-sdhi: add support for R-Car Gen3 SDHI DMAC")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/1608114572-1892-2-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: sdhci-msm: Actually set the actual clock

The MSM SDHCI driver always set the "actual_clock" field to 0.  It had
a comment about it not being needed because we weren't using the
standard SDHCI divider mechanism and we'd just fallback to
"host->clock".  However, it's still better to provide the actual
clock.  Why?

1. It will make timeout calculations slightly better.  On one system I
   have, the eMMC requets 200 MHz (for HS400-ES) but actually gets 192
   MHz.  These are close, but why not get the more accurate one.

2. If things are seriously off in the clock driver and it's missing
   rates or picking the wrong rate (maybe it's rounding up instead of
   down), this will make it much more obvious what's going on.

NOTE: we have to be a little careful here because the "actual_clock"
field shouldn't include the multiplier that sdhci-msm needs
internally.

Suggested-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
Link: https://lore.kernel.org/r/20201214092048.v5.2.I7564620993acd4baa63fa0e3925ca879a86d3ee3@changeid
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: sdhci-msm: Warn about overclocking SD/MMC

As talked about in commit 5e4b7e82d497 ("clk: qcom: gcc-sdm845: Use
floor ops for sdcc clks"), most clocks handled by the Qualcomm clock
drivers are rounded _up_ by default instead of down.  We should make
sure SD/MMC clocks are always rounded down in the clock drivers.
Let's add a warning in the Qualcomm SDHCI driver to help catch the
problem.

This would have saved a bunch of time [1].

NOTE: this doesn't actually fix any problems, it just makes it obvious
to devs that there is a problem and that should be an indication to
fix the clock driver.

[1] http://lore.kernel.org/r/20201210102234.1.I096779f219625148900fc984dd0084ed1ba87c7f@changeid

Suggested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20201214092048.v5.1.Iec3430c7d3c2a29262695edef7b82a14aaa567e5@changeid
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: sunxi: add support for A100 mmc controller

This patch adds support for A100 MMC controller, which use word address
for internal dma.

Signed-off-by: Yangtao Li <frank@allwinnertech.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20201211011934.6171-10-andre.przywara@arm.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

dt-bindings: mmc: sunxi: Add Allwinner A100 and H616 compatibles

Add binding for A100's and H616's mmc and emmc controller.

Signed-off-by: Yangtao Li <frank@allwinnertech.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20201211011934.6171-9-andre.przywara@arm.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: sdhci-of-dwcmshc: set SDHCI_QUIRK2_PRESET_VALUE_BROKEN

The SDHCI_PRESET_FOR_* registers are not set(all read as zeros), so
set the quirk.

Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Link: https://lore.kernel.org/r/20201210165510.76b917e5@xhacker.debian
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: usdhi6rol0: Fix a resource leak in the error handling path of the probe

A call to 'ausdhi6_dma_release()' to undo a previous call to
'usdhi6_dma_request()' is missing in the error handling path of the probe
function.

It is already present in the remove function.

Fixes: 75fa9ea6e3c0 ("mmc: add a driver for the Renesas usdhi6rol0 SD/SDIO host controller")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20201217210922.165340-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: sdhci-sprd: Fix some resource leaks in the remove function

'sdhci_remove_host()' and 'sdhci_pltfm_free()' should be used in place of
'mmc_remove_host()' and 'mmc_free_host()'.

This avoids some resource leaks, is more in line with the error handling
path of the probe function, and is more consistent with other drivers.

Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Orson Zhai <orson.zhai@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20201217204236.163446-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: owl-mmc: Fix a resource leak in an error handling path and in the remove function

'dma_request_chan()' calls should be balanced by a corresponding
'dma_release_channel()' call.

Add the missing call both in the error handling path of the probe function
and in the remove function.

Fixes: ff65ffe46d28 ("mmc: Add Actions Semi Owl SoCs SD/MMC driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20201209194202.54099-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: mxs-mmc: Fix a resource leak in an error handling path in 'mxs_mmc_probe()'

If 'mmc_of_parse()' fails, we must undo the previous 'dma_request_chan()'
call.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20201208203527.49262-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Linux 5.11-rc6

Merge tag 'efi-urgent-for-v5.11' of git://git./linux/kernel/git/tip/tip

Pull EFI fix from Borislav Petkov:
 "A single fix from Lukas: handle boolean device properties imported
  from Apple firmware correctly"

* tag 'efi-urgent-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi/apple-properties: Reinstate support for boolean properties

Merge tag 'x86_entry_for_v5.11_rc6' of git://git./linux/kernel/git/tip/tip

Pull x86 fix from Borislav Petkov:
 "A single fix for objtool to generate proper unwind info for newer
  toolchains which do not generate section symbols anymore. And a
  cleanup ontop.

  This was originally going to go during the next merge window but
  people can already trigger a build error with binutils-2.36 which
  doesn't emit section symbols - something which objtool relies on - so
  let's expedite it"

* tag 'x86_entry_for_v5.11_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/entry: Remove put_ret_addr_in_rdi THUNK macro argument
  x86/entry: Emit a symbol for register restoring thunk

Merge tag 'timers-urgent-2021-01-31' of git://git./linux/kernel/git/tip/tip

Pull timer fix from Thomas Gleixner:
 "A fix for handling advertised, but non-existent 146818 RTCs correctly.

  With the recent UIP handling changes the time readout of non-existent
  RTCs hangs forever as the read returns always 0xFF which means the UIP
  bit is set.

  Sanity check the RTC before registering by checking the RTC_VALID
  register for correctness"

* tag 'timers-urgent-2021-01-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  rtc: mc146818: Detect and handle broken RTCs

Merge tag 'core-urgent-2021-01-31' of git://git./linux/kernel/git/tip/tip

Pull single stepping fix from Thomas Gleixner:
 "A single fix for the single step reporting regression caused by
  getting the condition wrong when moving SYSCALL_EMU away from TIF
  flags"

[ There's apparently another problem too, fix pending ]

* tag 'core-urgent-2021-01-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  entry: Unbreak single step reporting behaviour

Merge tag 'powerpc-5.11-6' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fix from Michael Ellerman:
 "One fix for a bug in our soft interrupt masking, which could lead to
  interrupt replaying recursing, causing spurious interrupts.

  Thanks to Nicholas Piggin"

* tag 'powerpc-5.11-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s: prevent recursive replay_soft_interrupts causing superfluous interrupt

Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux

Pull i2c fix from Wolfram Sang:
 "Just one I2C driver update this time"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: mediatek: Move suspend and resume handling to NOIRQ phase

Merge branch 'for-rc-5.11' of git://git./linux/kernel/git/pavel/linux-leds

Pull LED fixes from Pavel Machek:
 "This pull is due to 'leds: trigger: fix potential deadlock with
  libata' -- people find the warn annoying.

  It also contains new driver and two trivial fixes"

* 'for-rc-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds:
  leds: rt8515: Add Richtek RT8515 LED driver
  dt-bindings: leds: Add DT binding for Richtek RT8515
  leds: trigger: fix potential deadlock with libata
  leds: leds-ariel: convert comma to semicolon
  leds: leds-lm3533: convert comma to semicolon

Merge tag 'nfs-for-5.11-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull NFS client fixes from Trond Myklebust:

 - SUNRPC: Handle 0 length opaque XDR object data properly

 - Fix a layout segment leak in pnfs_layout_process()

 - pNFS/NFSv4: Update the layout barrier when we schedule a layoutreturn

 - pNFS/NFSv4: Improve rejection of out-of-order layouts

 - pNFS/NFSv4: Try to return invalid layout in pnfs_layout_process()

* tag 'nfs-for-5.11-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  SUNRPC: Handle 0 length opaque XDR object data properly
  SUNRPC: Move simple_get_bytes and simple_get_netobj into private header
  pNFS/NFSv4: Improve rejection of out-of-order layouts
  pNFS/NFSv4: Update the layout barrier when we schedule a layoutreturn
  pNFS/NFSv4: Try to return invalid layout in pnfs_layout_process()
  pNFS/NFSv4: Fix a layout segment leak in pnfs_layout_process()

leds: rt8515: Add Richtek RT8515 LED driver

This adds a driver for the Richtek RT8515 dual channel
torch/flash white LED driver.

This LED driver is found in some mobile phones from
Samsung such as the GT-S7710 and GT-I8190.

A V4L interface is added.

We do not have a proper datasheet for the RT8515 but
it turns out that RT9387A has a public datasheet and
is essentially the same chip. We designed the driver
in accordance with this datasheet. The day someone
needs to drive a RT9387A this driver can probably
easily be augmented to handle that chip too.

Sakari Ailus, Pavel Machek and Andy Shevchenko helped
significantly in getting this driver right.

Cc: Sakari Ailus <sakari.ailus@iki.fi>
Cc: newbytee@protonmail.com
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: linux-media@vger.kernel.org
Cc: phone-devel@vger.kernel.org
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

dt-bindings: leds: Add DT binding for Richtek RT8515

Add a YAML devicetree binding for the Richtek RT8515
dual channel flash/torch LED driver.

Cc: Sakari Ailus <sakari.ailus@iki.fi>
Cc: newbytee@protonmail.com
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: phone-devel@vger.kernel.org
Cc: linux-media@vger.kernel.org
Cc: devicetree@vger.kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

leds: trigger: fix potential deadlock with libata

We have the following potential deadlock condition:

 ========================================================
 WARNING: possible irq lock inversion dependency detected
 5.10.0-rc2+ #25 Not tainted
 --------------------------------------------------------
 swapper/3/0 just changed the state of lock:
 ffff8880063bd618 (&host->lock){-...}-{2:2}, at: ata_bmdma_interrupt+0x27/0x200
 but this lock took another, HARDIRQ-READ-unsafe lock in the past:
  (&trig->leddev_list_lock){.+.?}-{2:2}

 and interrupts could create inverse lock ordering between them.

 other info that might help us debug this:
  Possible interrupt unsafe locking scenario:

        CPU0                    CPU1
        ----                    ----
   lock(&trig->leddev_list_lock);
                                local_irq_disable();
                                lock(&host->lock);
                                lock(&trig->leddev_list_lock);
   <Interrupt>
     lock(&host->lock);

  *** DEADLOCK ***

 no locks held by swapper/3/0.

 the shortest dependencies between 2nd lock and 1st lock:
  -> (&trig->leddev_list_lock){.+.?}-{2:2} ops: 46 {
     HARDIRQ-ON-R at:
                       lock_acquire+0x15f/0x420
                       _raw_read_lock+0x42/0x90
                       led_trigger_event+0x2b/0x70
                       rfkill_global_led_trigger_worker+0x94/0xb0
                       process_one_work+0x240/0x560
                       worker_thread+0x58/0x3d0
                       kthread+0x151/0x170
                       ret_from_fork+0x1f/0x30
     IN-SOFTIRQ-R at:
                       lock_acquire+0x15f/0x420
                       _raw_read_lock+0x42/0x90
                       led_trigger_event+0x2b/0x70
                       kbd_bh+0x9e/0xc0
                       tasklet_action_common.constprop.0+0xe9/0x100
                       tasklet_action+0x22/0x30
                       __do_softirq+0xcc/0x46d
                       run_ksoftirqd+0x3f/0x70
                       smpboot_thread_fn+0x116/0x1f0
                       kthread+0x151/0x170
                       ret_from_fork+0x1f/0x30
     SOFTIRQ-ON-R at:
                       lock_acquire+0x15f/0x420
                       _raw_read_lock+0x42/0x90
                       led_trigger_event+0x2b/0x70
                       rfkill_global_led_trigger_worker+0x94/0xb0
                       process_one_work+0x240/0x560
                       worker_thread+0x58/0x3d0
                       kthread+0x151/0x170
                       ret_from_fork+0x1f/0x30
     INITIAL READ USE at:
                           lock_acquire+0x15f/0x420
                           _raw_read_lock+0x42/0x90
                           led_trigger_event+0x2b/0x70
                           rfkill_global_led_trigger_worker+0x94/0xb0
                           process_one_work+0x240/0x560
                           worker_thread+0x58/0x3d0
                           kthread+0x151/0x170
                           ret_from_fork+0x1f/0x30
   }
   ... key      at: [<ffffffff83da4c00>] __key.0+0x0/0x10
   ... acquired at:
    _raw_read_lock+0x42/0x90
    led_trigger_blink_oneshot+0x3b/0x90
    ledtrig_disk_activity+0x3c/0xa0
    ata_qc_complete+0x26/0x450
    ata_do_link_abort+0xa3/0xe0
    ata_port_freeze+0x2e/0x40
    ata_hsm_qc_complete+0x94/0xa0
    ata_sff_hsm_move+0x177/0x7a0
    ata_sff_pio_task+0xc7/0x1b0
    process_one_work+0x240/0x560
    worker_thread+0x58/0x3d0
    kthread+0x151/0x170
    ret_from_fork+0x1f/0x30

 -> (&host->lock){-...}-{2:2} ops: 69 {
    IN-HARDIRQ-W at:
                     lock_acquire+0x15f/0x420
                     _raw_spin_lock_irqsave+0x52/0xa0
                     ata_bmdma_interrupt+0x27/0x200
                     __handle_irq_event_percpu+0xd5/0x2b0
                     handle_irq_event+0x57/0xb0
                     handle_edge_irq+0x8c/0x230
                     asm_call_irq_on_stack+0xf/0x20
                     common_interrupt+0x100/0x1c0
                     asm_common_interrupt+0x1e/0x40
                     native_safe_halt+0xe/0x10
                     arch_cpu_idle+0x15/0x20
                     default_idle_call+0x59/0x1c0
                     do_idle+0x22c/0x2c0
                     cpu_startup_entry+0x20/0x30
                     start_secondary+0x11d/0x150
                     secondary_startup_64_no_verify+0xa6/0xab
    INITIAL USE at:
                    lock_acquire+0x15f/0x420
                    _raw_spin_lock_irqsave+0x52/0xa0
                    ata_dev_init+0x54/0xe0
                    ata_link_init+0x8b/0xd0
                    ata_port_alloc+0x1f1/0x210
                    ata_host_alloc+0xf1/0x130
                    ata_host_alloc_pinfo+0x14/0xb0
                    ata_pci_sff_prepare_host+0x41/0xa0
                    ata_pci_bmdma_prepare_host+0x14/0x30
                    piix_init_one+0x21f/0x600
                    local_pci_probe+0x48/0x80
                    pci_device_probe+0x105/0x1c0
                    really_probe+0x221/0x490
                    driver_probe_device+0xe9/0x160
                    device_driver_attach+0xb2/0xc0
                    __driver_attach+0x91/0x150
                    bus_for_each_dev+0x81/0xc0
                    driver_attach+0x1e/0x20
                    bus_add_driver+0x138/0x1f0
                    driver_register+0x91/0xf0
                    __pci_register_driver+0x73/0x80
                    piix_init+0x1e/0x2e
                    do_one_initcall+0x5f/0x2d0
                    kernel_init_freeable+0x26f/0x2cf
                    kernel_init+0xe/0x113
                    ret_from_fork+0x1f/0x30
  }
  ... key      at: [<ffffffff83d9fdc0>] __key.6+0x0/0x10
  ... acquired at:
    __lock_acquire+0x9da/0x2370
    lock_acquire+0x15f/0x420
    _raw_spin_lock_irqsave+0x52/0xa0
    ata_bmdma_interrupt+0x27/0x200
    __handle_irq_event_percpu+0xd5/0x2b0
    handle_irq_event+0x57/0xb0
    handle_edge_irq+0x8c/0x230
    asm_call_irq_on_stack+0xf/0x20
    common_interrupt+0x100/0x1c0
    asm_common_interrupt+0x1e/0x40
    native_safe_halt+0xe/0x10
    arch_cpu_idle+0x15/0x20
    default_idle_call+0x59/0x1c0
    do_idle+0x22c/0x2c0
    cpu_startup_entry+0x20/0x30
    start_secondary+0x11d/0x150
    secondary_startup_64_no_verify+0xa6/0xab

This lockdep splat is reported after:
commit e918188611f0 ("locking: More accurate annotations for read_lock()")

To clarify:
 - read-locks are recursive only in interrupt context (when
   in_interrupt() returns true)
 - after acquiring host->lock in CPU1, another cpu (i.e. CPU2) may call
   write_lock(&trig->leddev_list_lock) that would be blocked by CPU0
   that holds trig->leddev_list_lock in read-mode
 - when CPU1 (ata_ac_complete()) tries to read-lock
   trig->leddev_list_lock, it would be blocked by the write-lock waiter
   on CPU2 (because we are not in interrupt context, so the read-lock is
   not recursive)
 - at this point if an interrupt happens on CPU0 and
   ata_bmdma_interrupt() is executed it will try to acquire host->lock,
   that is held by CPU1, that is currently blocked by CPU2, so:

   * CPU0 blocked by CPU1
   * CPU1 blocked by CPU2
   * CPU2 blocked by CPU0

     *** DEADLOCK ***

The deadlock scenario is better represented by the following schema
(thanks to Boqun Feng <boqun.feng@gmail.com> for the schema and the
detailed explanation of the deadlock condition):

 CPU 0:                          CPU 1:                        CPU 2:
 -----                           -----                         -----
 led_trigger_event():
   read_lock(&trig->leddev_list_lock);
  <workqueue>
  ata_hsm_qc_complete():
    spin_lock_irqsave(&host->lock);
  write_lock(&trig->leddev_list_lock);
    ata_port_freeze():
      ata_do_link_abort():
        ata_qc_complete():
  ledtrig_disk_activity():
    led_trigger_blink_oneshot():
      read_lock(&trig->leddev_list_lock);
      // ^ not in in_interrupt() context, so could get blocked by CPU 2
 <interrupt>
   ata_bmdma_interrupt():
     spin_lock_irqsave(&host->lock);

Fix by using read_lock_irqsave/irqrestore() in led_trigger_event(), so
that no interrupt can happen in between, preventing the deadlock
condition.

Apply the same change to led_trigger_blink_setup() as well, since the
same deadlock scenario can also happen in power_supply_update_bat_leds()
-> led_trigger_blink() -> led_trigger_blink_setup() (workqueue context),
and potentially prevent other similar usages.

Link: https://lore.kernel.org/lkml/20201101092614.GB3989@xps-13-7390/
Fixes: eb25cb9956cc ("leds: convert IDE trigger to common disk trigger")
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

leds: leds-ariel: convert comma to semicolon

Replace a comma between expression statements by a semicolon.

Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Reviewed-by: Alexander Dahl <ada@thorsis.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

leds: leds-lm3533: convert comma to semicolon

Replace a comma between expression statements by a semicolon.

Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

Merge tag '5.11-rc5-smb3' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs fixes from Steve French:
 "Four cifs patches found in additional testing of the conversion to the
  new mount API: three small option processing ones, and one fixing domain
  based DFS referrals"

* tag '5.11-rc5-smb3' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: fix dfs domain referrals
  cifs: returning mount parm processing errors correctly
  cifs: fix mounts to subdirectories of target
  cifs: ignore auto and noauto options if given

Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "Two minor fixes in drivers. Both changing strings (one in a comment,
  one in a module help text) with no code impact"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: qla2xxx: Fix description for parameter ql2xenforce_iocb_limit
  scsi: target: iscsi: Fix typo in comment

Merge tag 'for-linus' of git://github.com/openrisc/linux

Pull OpenRISC fix from Stafford Horne:
 "Fix config dependencies for Litex SOC driver causing issues on um"

* tag 'for-linus' of git://github.com/openrisc/linux:
  soc: litex: Properly depend on HAS_IOMEM

Merge tag 'devicetree-fixes-for-5.11-2' of git://git./linux/kernel/git/robh/linux

Pull devicetree fixes from Rob Herring:

 - Cleanups on properties with standard unit suffixes

 - Fix overwriting dma_range_map if there's no 'dma-ranges' property

 - Fix a bug when creating a /chosen node from ARM ATAGs

 - Add missing properties for TI j721e USB binding

 - Several doc reference updates due to DT schema conversions

* tag 'devicetree-fixes-for-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: Cleanup standard unit properties
  of/device: Update dma_range_map only when dev has valid dma-ranges
  ARM: zImage: atags_to_fdt: Fix node names on added root nodes
  dt-bindings: usb: j721e: add ranges and dma-coherent props
  dt-bindings:iio:adc: update adc.yaml reference
  dt-bindings: memory: mediatek: update mediatek,smi-larb.yaml references
  dt-bindings: display: mediatek: update mediatek,dpi.yaml reference
  ASoC: audio-graph-card: update audio-graph-card.yaml reference

Merge tag 's390-5.11-4' of git://git./linux/kernel/git/s390/linux

Pull s390 fixes from Vasily Gorbik:

 - Fix max number of VCPUs reported via ultravisor information sysfs
   interface.

 - Fix memory leaks during vfio-ap resources clean up on KVM pointer
   invalidation notification.

 - Fix potential specification exception by avoiding unnecessary
   interrupts disable after queue reset in vfio-ap.

* tag 's390-5.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390: uv: Fix sysfs max number of VCPUs reporting
  s390/vfio-ap: No need to disable IRQ after queue reset
  s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated

Merge tag 'riscv-for-linus-5.11-rc6' of git://git./linux/kernel/git/riscv/linux

Pull RISC-V fix from Palmer Dabbelt:
 "A fix to avoid initializing max_mapnr to be too large, which may
  manifest on NUMA systems"

* tag 'riscv-for-linus-5.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Fixup pfn_valid error with wrong max_mapnr

dt-bindings: Cleanup standard unit properties

Properties with standard unit suffixes already have a type and don't need
type definitions. They also default to a single entry, so 'maxItems: 1'
can be dropped.

adi,ad5758 is an oddball which defined an enum of arrays. While a valid
schema, it is simpler as a whole to only define scalar constraints.

Cc: Jean Delvare <jdelvare@suse.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: linux-hwmon@vger.kernel.org
Cc: linux-i2c@vger.kernel.org
Cc: linux-iio@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-input@vger.kernel.org
Cc: linux-mmc@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: linux-rtc@vger.kernel.org
Cc: linux-serial@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Cc: linux-watchdog@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Sebastian Reichel <sre@kernel.org> # for power-supply
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for-iio
Acked-by: Alexandre TORGUE <alexandre.torgue@foss.st.com>
Link: https://lore.kernel.org/r/20210128194515.743252-1-robh@kernel.org

Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull arm64 fixes from Catalin Marinas:

 - Fix the virt_addr_valid() returning true for < PAGE_OFFSET addresses.

 - Do not blindly trust the DMA masks from ACPI/IORT.

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  ACPI/IORT: Do not blindly trust DMA masks from firmware
  arm64: Fix kernel address detection of __is_lm_address()

Merge tag 'for-5.11-rc5-tag' of git://git./linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:
 "A few more fixes for a late rc:

   - fix lockdep complaint on 32bit arches and also remove an unsafe
     memory use due to device vs filesystem lifetime

   - two fixes for free space tree:

      * race during log replay and cache rebuild, now more likely to
        happen due to changes in this dev cycle

      * possible free space tree corruption with online conversion
        during initial tree population"

* tag 'for-5.11-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fix log replay failure due to race with space cache rebuild
  btrfs: fix lockdep warning due to seqcount_mutex on 32bit arch
  btrfs: fix possible free space tree corruption with online conversion

Merge tag 'block-5.11-2021-01-29' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:
 "All over the place fixes for this release:

   - blk-cgroup iteration teardown resched fix (Baolin)

   - NVMe pull request from Christoph:
        - add another Write Zeroes quirk (Chaitanya Kulkarni)
        - handle a no path available corner case (Daniel Wagner)
        - use the proper RCU aware list_add helper (Chao Leng)

   - bcache regression fix (Coly)

   - bdev->bd_size_lock IRQ fix. This will be fixed in drivers for 5.12,
     but for now, we'll make it IRQ safe (Damien)

   - null_blk zoned init fix (Damien)

   - add_partition() error handling fix (Dinghao)

   - s390 dasd kobject fix (Jan)

   - nbd fix for freezing queue while adding connections (Josef)

   - tag queueing regression fix (Ming)

   - revert of a patch that inadvertently meant that we regressed write
     performance on raid (Maxim)"

* tag 'block-5.11-2021-01-29' of git://git.kernel.dk/linux-block:
  null_blk: cleanup zoned mode initialization
  nvme-core: use list_add_tail_rcu instead of list_add_tail for nvme_init_ns_head
  nvme-multipath: Early exit if no path is available
  nvme-pci: add the DISABLE_WRITE_ZEROES quirk for a SPCC device
  bcache: only check feature sets when sb->version >= BCACHE_SB_VERSION_CDEV_WITH_FEATURES
  block: fix bd_size_lock use
  blk-cgroup: Use cond_resched() when destroy blkgs
  Revert "block: simplify set_init_blocksize" to regain lost performance
  nbd: freeze the queue while we're adding connections
  s390/dasd: Fix inconsistent kobject removal
  block: Fix an error handling in add_partition
  blk-mq: test QUEUE_FLAG_HCTX_ACTIVE for sbitmap_shared in hctx_may_queue

Merge tag 'io_uring-5.11-2021-01-29' of git://git.kernel.dk/linux-block

Pull io_uring fixes from Jens Axboe:
 "We got the cancelation story sorted now, so for all intents and
  purposes, this should be it for 5.11 outside of any potential little
  fixes that may come in. This contains:

   - task_work task state fixes (Hao, Pavel)

   - Cancelation fixes (me, Pavel)

   - Fix for an inflight req patch in this release (Pavel)

   - Fix for a lock deadlock issue (Pavel)"

* tag 'io_uring-5.11-2021-01-29' of git://git.kernel.dk/linux-block:
  io_uring: reinforce cancel on flush during exit
  io_uring: fix sqo ownership false positive warning
  io_uring: fix list corruption for splice file_get
  io_uring: fix flush cqring overflow list while TASK_INTERRUPTIBLE
  io_uring: fix wqe->lock/completion_lock deadlock
  io_uring: fix cancellation taking mutex while TASK_UNINTERRUPTIBLE
  io_uring: fix __io_uring_files_cancel() with TASK_UNINTERRUPTIBLE
  io_uring: only call io_cqring_ev_posted() if events were posted
  io_uring: if we see flush on exit, cancel related tasks

soc: litex: Properly depend on HAS_IOMEM

The LiteX SOC controller driver makes use of IOMEM functions like
devm_platform_ioremap_resource(), which are only available if
CONFIG_HAS_IOMEM is defined.

This causes the driver to be enable under make ARCH=um allyesconfig,
even though it won't build.

By adding a dependency on HAS_IOMEM, the driver will not be enabled on
architectures which don't support it.

Fixes: 22447a99c97e ("drivers/soc/litex: add LiteX SoC Controller driver")
Signed-off-by: David Gow <davidgow@google.com>
[shorne@gmail.com: Fix typo in commit message pointed out in review]
Signed-off-by: Stafford Horne <shorne@gmail.com>

Merge tag 'iommu-fixes-v5.11-rc5' of git://git./linux/kernel/git/joro/iommu

Pull iommu fixes from Joerg Roedel:

 - AMD IOMMU fix to make sure features are detected before they are
   queried.

 - Intel IOMMU address alignment check fix for an IOLTB flushing
   command.

 - Performance fix for Intel IOMMU to make sure the code does not do
   full IOTLB flushes all the time. Those flushes are very expensive
   on emulated IOMMUs.

* tag 'iommu-fixes-v5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/vt-d: Do not use flush-queue when caching-mode is on
  iommu/vt-d: Correctly check addr alignment in qi_flush_dev_iotlb_pasid()
  iommu/amd: Use IVHD EFR for early initialization of IOMMU features

Merge tag 'pm-5.11-rc6' of git://git./linux/kernel/git/rafael/linux-pm

Pull power management fixes from Rafael Wysocki:
 "These fix a deadlock in the 'kexec jump' code and address a possible
  hibernation image creation issue.

  Specifics:

   - Fix a deadlock caused by attempting to acquire the same mutex twice
     in a row in the "kexec jump" code (Baoquan He)

   - Modify the hibernation image saving code to flush the unwritten
     data to the swap storage later so as to avoid failing to write the
     image signature which is possible in some cases (Laurent Badel)"

* tag 'pm-5.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM: hibernate: flush swap writer after marking
  kernel: kexec: remove the lock operation of system_transition_mutex

Merge tag 'acpi-5.11-rc6' of git://git./linux/kernel/git/rafael/linux-pm

Pull ACPI fixes from Rafael Wysocki:
 "These fix the handling of notifications in the ACPI thermal driver and
  address a device enumeration issue leading to the presence of multiple
  'MODALIAS=' entries in one uevent file in sysfs in some cases.

  Specifics:

   - Modify the ACPI thermal driver to avoid evaluating _TMP directly in
     its Notify () handler callback and running too many thermal checks
     for one thermal zone at the same time so as to address a work item
     accumulation issue observed on some systems that fail to shut down
     as a result of it (Rafael Wysocki)

   - Modify the ACPI uevent file creation code to avoid putting multiple
     'MODALIAS=' entries in one uevent file in sysfs which breaks
     systemd-udevd (Kai-Heng Feng)"

* tag 'acpi-5.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: thermal: Do not call acpi_thermal_check() directly
  ACPI: sysfs: Prefer "compatible" modalias

Merge tag 'drm-fixes-2021-01-29' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
 "Weekly fixes for graphics, nothing too major, nouveau has a few
  regression fixes for various fallout from header changes previously,
  vc4 has two fixes, two amdgpu, and a smattering of i915 fixes.

  All seems on course for a quieter rc7, fingers crossed.

  nouveau:
   - fix svm init conditions
   - fix nv50 modesetting regression
   - fix cursor plane modifiers
   - fix > 64x64 cursor regression

  vc4:
   - Fix LBM size calculation
   - Fix high resolutions for hvs5

  i915:
   - Fix ICL MG PHY vswing
   - Fix subplatform handling
   - Fix selftest memleak
   - Clear CACHE_MODE prior to clearing residuals
   - Always flush the active worker before returning from the wait
   - Always try to reserve GGTT address 0x0

  amdgpu:
   - Fix a fan control regression on some boards
   - Fix clang warning"

* tag 'drm-fixes-2021-01-29' of git://anongit.freedesktop.org/drm/drm:
  drm/nouveau/kms/gk104-gp1xx: Fix > 64x64 cursors
  drm/nouveau/kms/nv50-: Report max cursor size to userspace
  drivers/nouveau/kms/nv50-: Reject format modifiers for cursor planes
  drm/nouveau/svm: fail NOUVEAU_SVM_INIT ioctl on unsupported devices
  drm/nouveau/dispnv50: Restore pushing of all data.
  amdgpu: fix clang build warning
  Revert "drm/amdgpu/swsmu: drop set_fan_speed_percent (v2)"
  drm/i915/gt: Always try to reserve GGTT address 0x0
  drm/i915: Always flush the active worker before returning from the wait
  drm/i915/selftest: Fix potential memory leak
  drm/i915: Check for all subplatform bits
  drm/i915: Fix ICL MG PHY vswing handling
  drm/i915/gt: Clear CACHE_MODE prior to clearing residuals
  drm/vc4: Correct POS1_SCL for hvs5
  drm/vc4: Correct lbm size and calculation
  drm/nouveau/nvif: fix method count when pushing an array

tty: avoid using vfs_iocb_iter_write() for redirected console writes

It turns out that the vfs_iocb_iter_{read,write}() functions are
entirely broken, and don't actually use the passed-in file pointer for
IO - only for the preparatory work (permission checking and for the
write_iter function lookup).

That worked fine for overlayfs, which always builds the new iocb with
the same file pointer that it passes in, but in the general case it ends
up doing nonsensical things (and could cause an iterator call that
doesn't even match the passed-in file pointer).

This subtly broke the tty conversion to write_iter in commit
9bb48c82aced ("tty: implement write_iter"), because the console
redirection didn't actually end up redirecting anything, since the
passed-in file pointer was basically ignored, and the actual write was
done with the original non-redirected console tty after all.

The main visible effect of this is that the console messages were no
longer logged to /var/log/boot.log during graphical boot.

Fix the issue by simply not using the vfs write "helper" function at
all, and just redirecting the write entirely internally to the tty
layer.  Do the target writability permission checks when actually
registering the target tty with TIOCCONS instead of at write time.

Fixes: 9bb48c82aced ("tty: implement write_iter")
Reported-and-tested-by: Hans de Goede <hdegoede@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'acpi-sysfs'

* acpi-sysfs:
  ACPI: sysfs: Prefer "compatible" modalias

null_blk: cleanup zoned mode initialization

To avoid potential compilation problems, replaced the badly written
MB_TO_SECTS() macro (missing parenthesis around the argument use) with
the inline function mb_to_sects(). And while at it, simplify the
calculation of the total number of zones of the device using the
round_up() macro.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

cifs: fix dfs domain referrals

The new mount API requires additional changes to how DFS
is handled. Additional testing of DFS uncovered problems
with domain based DFS referrals (a follow on patch addresses
DFS links) which this patch addresses.

Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>

Merge tag 'ecryptfs-5.11-rc6-setxattr-fix' of git://git./linux/kernel/git/tyhicks/ecryptfs

Pull ecryptfs fix from Tyler Hicks:
 "Fix a regression that resulted in two rounds of UID translations when
  setting v3 namespaced file capabilities in some configurations"

* tag 'ecryptfs-5.11-rc6-setxattr-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs:
  ecryptfs: fix uid translation for setxattr on security.capability

Merge tag 'amd-drm-fixes-5.11-2021-01-28' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-5.11-2021-01-28:

amdgpu:
- Fix a fan control regression on some boards
- Fix clang warning

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210128191558.3821-1-alexander.deucher@amd.com

Merge tag 'drm-intel-fixes-2021-01-28' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

drm/i915 fixes for v5.11-rc6:
- Fix ICL MG PHY vswing
- Fix subplatform handling
- Fix selftest memleak
- Clear CACHE_MODE prior to clearing residuals
- Always flush the active worker before returning from the wait
- Always try to reserve GGTT address 0x0

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87y2gdi3mp.fsf@intel.com

Merge tag 'drm-misc-fixes-2021-01-27' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

Short summary of fixes pull (less than what git shortlog provides):

 * drm/vc4: Fix LBM size calculation; Fix high resolutions for hvs5

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YBEco1Vxeny8U/ca@linux-uq9g

Merge branch '04.01-ampere-lite' of git://github.com/skeggsb/linux into drm-fixes

Mostly a regression fixes here, a couple of which could lead to
display hanging, and have been affecting a number of users.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <skeggsb@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CACAvsv4Y0ZiAevSvgphLAOaZjFi75ECXqUD9ShBvRxZ6S-pb9Q@mail.gmail.com

drm/nouveau/kms/gk104-gp1xx: Fix > 64x64 cursors

While we do handle the additional cursor sizes introduced in NVE4, it looks
like we accidentally broke this when converting over to use Nvidia's
display headers. Since we now use NVVAL in dispnv50/head907d.c in order to
format the value for the cursor layout and NVD9 only had one byte reserved
vs. the 2 bytes reserved in later generations, we end up accidentally
stripping the second bit in the cursor layout format parameter - causing us
to set the wrong cursor size.

This fixes that by adding our own curs_set hook for 917d which uses the
NV917D headers.

Cc: Martin Peres <martin.peres@free.fr>
Cc: Jeremy Cline <jcline@redhat.com>
Cc: Simon Ser <contact@emersion.fr>
Cc: <stable@vger.kernel.org> # v5.9+
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: ed0b86a90bf9 ("drm/nouveau/kms/nv50-: use NVIDIA's headers for core head_curs_set()")
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/kms/nv50-: Report max cursor size to userspace

Cc: Martin Peres <martin.peres@free.fr>
Cc: Jeremy Cline <jcline@redhat.com>
Cc: Simon Ser <contact@emersion.fr>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Tested-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drivers/nouveau/kms/nv50-: Reject format modifiers for cursor planes

Nvidia hardware doesn't actually support using tiling formats with the
cursor plane, only linear is allowed. In the future, we should write a
testcase for this.

Fixes: c586f30bf74c ("drm/nouveau/kms: Add format mod prop to base/ovly/nvdisp")
Cc: James Jones <jajones@nvidia.com>
Cc: Martin Peres <martin.peres@free.fr>
Cc: Jeremy Cline <jcline@redhat.com>
Cc: Simon Ser <contact@emersion.fr>
Cc: <stable@vger.kernel.org> # v5.8+
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: James Jones <jajones@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/svm: fail NOUVEAU_SVM_INIT ioctl on unsupported devices

Fixes a crash when trying to create a channel on e.g. Turing GPUs when
NOUVEAU_SVM_INIT was called before.

Fixes: eeaf06ac1a558 ("drm/nouveau/svm: initial support for shared virtual memory")
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/dispnv50: Restore pushing of all data.

Commit f844eb485eb056ad3b67e49f95cbc6c685a73db4 introduced a regression for
NV50, which lead to visual artifacts, tearing and eventual crashes.

In the changes of f844eb485eb056ad3b67e49f95cbc6c685a73db4 only the first line
was correctly translated to the new NVIDIA header macros:

- PUSH_NVSQ(push, NV827C, 0x0110, 0,
- 0x0114, 0);
+ PUSH_MTHD(push, NV827C, SET_PROCESSING,
+   NVDEF(NV827C, SET_PROCESSING, USE_GAIN_OFS, DISABLE));

The lower part ("0x0114, 0") was probably omitted by accident.

This patch restores the push of the missing data and fixes the regression.

Signed-off-by: Bastian Beranek <bastian.beischer@rwth-aachen.de>
Fixes: f844eb485eb05 ("drm/nouveau/kms/nv50-: use NVIDIA's headers for wndw image_set()")
Link: https://gitlab.freedesktop.org/drm/nouveau/-/issues/14
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

io_uring: reinforce cancel on flush during exit

What 84965ff8a84f0 ("io_uring: if we see flush on exit, cancel related tasks")
really wants is to cancel all relevant REQ_F_INFLIGHT requests reliably.
That can be achieved by io_uring_cancel_files(), but we'll miss it
calling io_uring_cancel_task_requests(files=NULL) from io_uring_flush(),
because it will go through __io_uring_cancel_task_requests().

Just always call io_uring_cancel_files() during cancel, it's good enough
for now.

Cc: stable@vger.kernel.org # 5.9+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge tag 'net-5.11-rc6' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
 "Networking fixes including fixes from can, xfrm, wireless,
  wireless-drivers and netfilter trees. Nothing scary, Intel
  WiFi-related fixes seemed most notable to the users.

  Current release - regressions:

   - dsa: microchip: ksz8795: fix KSZ8794 port map again to program the
     CPU port correctly

  Current release - new code bugs:

   - iwlwifi: pcie: reschedule in long-running memory reads

  Previous releases - regressions:

   - iwlwifi: dbg: don't try to overwrite read-only FW data

   - iwlwifi: provide gso_type to GSO packets

   - octeontx2: make sure the buffer is 128 byte aligned

   - tcp: make TCP_USER_TIMEOUT accurate for zero window probes

   - xfrm: fix wraparound in xfrm_policy_addr_delta()

   - xfrm: fix oops in xfrm_replay_advance_bmp due to a race between
     CPUs in presence of packet reorder

   - tcp: fix TLP timer not set when CA_STATE changes from DISORDER to
     OPEN

   - wext: fix NULL-ptr-dereference with cfg80211's lack of commit()

  Previous releases - always broken:

   - igc: fix link speed advertising

   - stmmac: configure EHL PSE0 GbE and PSE1 GbE to 32 bits DMA
     addressing

   - team: protect features update by RCU to avoid deadlock

   - xfrm: fix disable_xfrm sysctl when used on xfrm interfaces
     themselves

   - fec: fix temporary RMII clock reset on link up

   - can: dev: prevent potential information leak in can_fill_info()

  Misc:

   - mrp: fix bad packing of MRP test packet structures

   - uapi: fix big endian definition of ipv6_rpl_sr_hdr

   - add David Ahern to IPv4/IPv6 maintainers"

* tag 'net-5.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (86 commits)
  rxrpc: Fix memory leak in rxrpc_lookup_local
  mlxsw: spectrum_span: Do not overwrite policer configuration
  selftests: forwarding: Specify interface when invoking mausezahn
  stmmac: intel: Configure EHL PSE0 GbE and PSE1 GbE to 32 bits DMA addressing
  net: usb: cdc_ether: added support for Thales Cinterion PLSx3 modem family.
  ibmvnic: Ensure that CRQ entry read are correctly ordered
  MAINTAINERS: add missing header for bonding
  net: decnet: fix netdev refcount leaking on error path
  net: switchdev: don't set port_obj_info->handled true when -EOPNOTSUPP
  can: dev: prevent potential information leak in can_fill_info()
  net: fec: Fix temporary RMII clock reset on link up
  net: lapb: Add locking to the lapb module
  team: protect features update by RCU to avoid deadlock
  MAINTAINERS: add David Ahern to IPv4/IPv6 maintainers
  net/mlx5: CT: Fix incorrect removal of tuple_nat_node from nat rhashtable
  net/mlx5e: Revert parameters on errors when changing MTU and LRO state without reset
  net/mlx5e: Revert parameters on errors when changing trust state without reset
  net/mlx5e: Correctly handle changing the number of queues when the interface is down
  net/mlx5e: Fix CT rule + encap slow path offload and deletion
  net/mlx5e: Disable hw-tc-offload when MLX5_CLS_ACT config is disabled
  ...

cifs: returning mount parm processing errors correctly

During additional testing of the updated cifs.ko with the
new mount API support, we found a few additional cases where
we were logging errors, but not returning them to the user.

For example:
   a) invalid security mechanisms
   b) invalid cache options
   c) unsupported rdma
   d) invalid smb dialect requested

Fixes: 24e0a1eff9e2 ("cifs: switch to new mount api")
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

rxrpc: Fix memory leak in rxrpc_lookup_local

Commit 9ebeddef58c4 ("rxrpc: rxrpc_peer needs to hold a ref on the rxrpc_local record")
Then release ref in __rxrpc_put_peer and rxrpc_put_peer_locked.

struct rxrpc_peer *rxrpc_alloc_peer(struct rxrpc_local *local, gfp_t gfp)
-               peer->local = local;
+               peer->local = rxrpc_get_local(local);

rxrpc_discard_prealloc also need ref release in discarding.

syzbot report:
BUG: memory leak
unreferenced object 0xffff8881080ddc00 (size 256):
  comm "syz-executor339", pid 8462, jiffies 4294942238 (age 12.350s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 0a 00 00 00 00 c0 00 08 81 88 ff ff  ................
  backtrace:
    [<000000002b6e495f>] kmalloc include/linux/slab.h:552 [inline]
    [<000000002b6e495f>] kzalloc include/linux/slab.h:682 [inline]
    [<000000002b6e495f>] rxrpc_alloc_local net/rxrpc/local_object.c:79 [inline]
    [<000000002b6e495f>] rxrpc_lookup_local+0x1c1/0x760 net/rxrpc/local_object.c:244
    [<000000006b43a77b>] rxrpc_bind+0x174/0x240 net/rxrpc/af_rxrpc.c:149
    [<00000000fd447a55>] afs_open_socket+0xdb/0x200 fs/afs/rxrpc.c:64
    [<000000007fd8867c>] afs_net_init+0x2b4/0x340 fs/afs/main.c:126
    [<0000000063d80ec1>] ops_init+0x4e/0x190 net/core/net_namespace.c:152
    [<00000000073c5efa>] setup_net+0xde/0x2d0 net/core/net_namespace.c:342
    [<00000000a6744d5b>] copy_net_ns+0x19f/0x3e0 net/core/net_namespace.c:483
    [<0000000017d3aec3>] create_new_namespaces+0x199/0x4f0 kernel/nsproxy.c:110
    [<00000000186271ef>] unshare_nsproxy_namespaces+0x9b/0x120 kernel/nsproxy.c:226
    [<000000002de7bac4>] ksys_unshare+0x2fe/0x5c0 kernel/fork.c:2957
    [<00000000349b12ba>] __do_sys_unshare kernel/fork.c:3025 [inline]
    [<00000000349b12ba>] __se_sys_unshare kernel/fork.c:3023 [inline]
    [<00000000349b12ba>] __x64_sys_unshare+0x12/0x20 kernel/fork.c:3023
    [<000000006d178ef7>] do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
    [<00000000637076d4>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 9ebeddef58c4 ("rxrpc: rxrpc_peer needs to hold a ref on the rxrpc_local record")
Signed-off-by: Takeshi Misawa <jeliantsurux@gmail.com>
Reported-and-tested-by: syzbot+305326672fed51b205f7@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/161183091692.3506637.3206605651502458810.stgit@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'mlxsw-various-fixes'

Ido Schimmel says:

====================
mlxsw: Various fixes

Patch #1 fixes wrong invocation of mausezahn in a couple of selftests.
The tests started failing after Fedora updated their libnet package from
version 1.1.6 to 1.2.1. With the fix the tests pass regardless of libnet
version.

Patch #2 fixes an issue in the mirroring to CPU code that results in
policer configuration being overwritten.
====================

Link: https://lore.kernel.org/r/20210128144820.3280295-1-idosch@idosch.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mlxsw: spectrum_span: Do not overwrite policer configuration

The purpose of the delayed work in the SPAN module is to potentially
update the destination port and various encapsulation parameters of SPAN
agents that point to a VLAN device or a GRE tap. The destination port
can change following the insertion of a new route, for example.

SPAN agents that point to a physical port or the CPU port are static and
never change throughout the lifetime of the SPAN agent. Therefore, skip
over them in the delayed work.

This fixes an issue where the delayed work overwrites the policer
that was set on a SPAN agent pointing to the CPU. Modifying the delayed
work to inherit the original policer configuration is error-prone, as
the same will be needed for any new parameter.

Fixes: 4039504e6a0c ("mlxsw: spectrum_span: Allow setting policer on a SPAN agent")
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: forwarding: Specify interface when invoking mausezahn

Specify the interface through which packets should be transmitted so
that the test will pass regardless of the libnet version against which
mausezahn is linked.

Fixes: cab14d1087d9 ("selftests: Add version of router_multipath.sh using nexthop objects")
Fixes: 3d578d879517 ("selftests: forwarding: Test IPv4 weighted nexthops")
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

stmmac: intel: Configure EHL PSE0 GbE and PSE1 GbE to 32 bits DMA addressing

Fix an issue where dump stack is printed and Reset Adapter occurs when
PSE0 GbE or/and PSE1 GbE is/are enabled. EHL PSE0 GbE and PSE1 GbE use
32 bits DMA addressing whereas EHL PCH GbE uses 64 bits DMA addressing.

[   25.535095] ------------[ cut here ]------------
[   25.540276] NETDEV WATCHDOG: enp0s29f2 (intel-eth-pci): transmit queue 2 timed out
[   25.548749] WARNING: CPU: 2 PID: 0 at net/sched/sch_generic.c:443 dev_watchdog+0x259/0x260
[   25.558004] Modules linked in: 8021q bnep bluetooth ecryptfs snd_hda_codec_hdmi intel_gpy marvell intel_ishtp_loader intel_ishtp_hid iTCO_wdt mei_hdcp iTCO_vendor_support x86_pkg_temp_thermal kvm_intel dwmac_intel stmmac kvm igb pcs_xpcs irqbypass phylink snd_hda_intel intel_rapl_msr pcspkr dca snd_hda_codec i915 i2c_i801 i2c_smbus libphy intel_ish_ipc snd_hda_core mei_me intel_ishtp mei spi_dw_pci 8250_lpss spi_dw thermal dw_dmac_core parport_pc tpm_crb tpm_tis parport tpm_tis_core tpm intel_pmc_core sch_fq_codel uhid fuse configfs snd_sof_pci snd_sof_intel_byt snd_sof_intel_ipc snd_sof_intel_hda_common snd_sof_xtensa_dsp snd_sof snd_soc_acpi_intel_match snd_soc_acpi snd_intel_dspcfg ledtrig_audio snd_soc_core snd_compress ac97_bus snd_pcm snd_timer snd soundcore
[   25.633795] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G     U            5.11.0-rc4-intel-lts-MISMAIL5+ #5
[   25.644306] Hardware name: Intel Corporation Elkhart Lake Embedded Platform/ElkhartLake LPDDR4x T4 RVP1, BIOS EHLSFWI1.R00.2434.A00.2010231402 10/23/2020
[   25.659674] RIP: 0010:dev_watchdog+0x259/0x260
[   25.664650] Code: e8 3b 6b 60 ff eb 98 4c 89 ef c6 05 ec e7 bf 00 01 e8 fb e5 fa ff 89 d9 4c 89 ee 48 c7 c7 78 31 d2 9e 48 89 c2 e8 79 1b 18 00 <0f> 0b e9 77 ff ff ff 0f 1f 44 00 00 48 c7 47 08 00 00 00 00 48 c7
[   25.685647] RSP: 0018:ffffb7ca80160eb8 EFLAGS: 00010286
[   25.691498] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000103
[   25.699483] RDX: 0000000080000103 RSI: 00000000000000f6 RDI: 00000000ffffffff
[   25.707465] RBP: ffff985709ce0440 R08: 0000000000000000 R09: c0000000ffffefff
[   25.715455] R10: ffffb7ca80160cf0 R11: ffffb7ca80160ce8 R12: ffff985709ce039c
[   25.723438] R13: ffff985709ce0000 R14: 0000000000000008 R15: ffff9857068af940
[   25.731425] FS:  0000000000000000(0000) GS:ffff985864300000(0000) knlGS:0000000000000000
[   25.740481] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   25.746913] CR2: 00005567f8bb76b8 CR3: 00000001f8e0a000 CR4: 0000000000350ee0
[   25.754900] Call Trace:
[   25.757631]  <IRQ>
[   25.759891]  ? qdisc_put_unlocked+0x30/0x30
[   25.764565]  ? qdisc_put_unlocked+0x30/0x30
[   25.769245]  call_timer_fn+0x2e/0x140
[   25.773346]  run_timer_softirq+0x1f3/0x430
[   25.777932]  ? __hrtimer_run_queues+0x12c/0x2c0
[   25.783005]  ? ktime_get+0x3e/0xa0
[   25.786812]  __do_softirq+0xa6/0x2ef
[   25.790816]  asm_call_irq_on_stack+0xf/0x20
[   25.795501]  </IRQ>
[   25.797852]  do_softirq_own_stack+0x5d/0x80
[   25.802538]  irq_exit_rcu+0x94/0xb0
[   25.806475]  sysvec_apic_timer_interrupt+0x42/0xc0
[   25.811836]  asm_sysvec_apic_timer_interrupt+0x12/0x20
[   25.817586] RIP: 0010:cpuidle_enter_state+0xd9/0x370
[   25.823142] Code: 85 c0 0f 8f 0a 02 00 00 31 ff e8 22 d5 7e ff 45 84 ff 74 12 9c 58 f6 c4 02 0f 85 47 02 00 00 31 ff e8 7b a0 84 ff fb 45 85 f6 <0f> 88 ab 00 00 00 49 63 ce 48 2b 2c 24 48 89 c8 48 6b d1 68 48 c1
[   25.844140] RSP: 0018:ffffb7ca800f7e80 EFLAGS: 00000206
[   25.849996] RAX: ffff985864300000 RBX: 0000000000000003 RCX: 000000000000001f
[   25.857975] RDX: 00000005f2028ea8 RSI: ffffffff9ec5907f RDI: ffffffff9ec62a5d
[   25.865961] RBP: 00000005f2028ea8 R08: 0000000000000000 R09: 0000000000029d00
[   25.873947] R10: 000000137b0e0508 R11: ffff9858643294e4 R12: ffff9858643336d0
[   25.881935] R13: ffffffff9ef74b00 R14: 0000000000000003 R15: 0000000000000000
[   25.889918]  cpuidle_enter+0x29/0x40
[   25.893922]  do_idle+0x24a/0x290
[   25.897536]  cpu_startup_entry+0x19/0x20
[   25.901930]  start_secondary+0x128/0x160
[   25.906326]  secondary_startup_64_no_verify+0xb0/0xbb
[   25.911983] ---[ end trace b4c0c8195d0ba61f ]---
[   25.917193] intel-eth-pci 0000:00:1d.2 enp0s29f2: Reset adapter.

Fixes: 67c08ac4140a ("net: stmmac: add EHL PSE0 & PSE1 1Gbps PCI info and PCI ID")
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Co-developed-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
Link: https://lore.kernel.org/r/20210126100844.30326-1-mohammad.athari.ismail@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: usb: cdc_ether: added support for Thales Cinterion PLSx3 modem family.

lsusb -v for this device:

Bus 003 Device 007: ID 1e2d:0069
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass          239 Miscellaneous Device
  bDeviceSubClass         2 ?
  bDeviceProtocol         1 Interface Association
  bMaxPacketSize0        64
  idVendor           0x1e2d
  idProduct          0x0069
  bcdDevice            0.00
  iManufacturer           4 Cinterion Wireless Modules
  iProduct                3 PLSx3
  iSerial                 5 fa3c1419
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength          352
    bNumInterfaces         10
    bConfigurationValue     1
    iConfiguration          2 Cinterion Configuration
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower              500mA
    Interface Association:
      bLength                 8
      bDescriptorType        11
      bFirstInterface         0
      bInterfaceCount         2
      bFunctionClass          2 Communications
      bFunctionSubClass       2 Abstract (modem)
      bFunctionProtocol       1 AT-commands (v.25ter)
      iFunction               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         2 Communications
      bInterfaceSubClass      2 Abstract (modem)
      bInterfaceProtocol      1 AT-commands (v.25ter)
      iInterface              0
      CDC Header:
        bcdCDC               1.10
      CDC ACM:
        bmCapabilities       0x02
          line coding and serial state
      CDC Call Management:
        bmCapabilities       0x03
          call management
          use DataInterface
        bDataInterface          1
      CDC Union:
        bMasterInterface        0
        bSlaveInterface         1
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               5
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
    Interface Association:
      bLength                 8
      bDescriptorType        11
      bFirstInterface         2
      bInterfaceCount         2
      bFunctionClass          2 Communications
      bFunctionSubClass       2 Abstract (modem)
      bFunctionProtocol       1 AT-commands (v.25ter)
      iFunction               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        2
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         2 Communications
      bInterfaceSubClass      2 Abstract (modem)
      bInterfaceProtocol      1 AT-commands (v.25ter)
      iInterface              0
      CDC Header:
        bcdCDC               1.10
      CDC ACM:
        bmCapabilities       0x02
          line coding and serial state
      CDC Call Management:
        bmCapabilities       0x03
          call management
          use DataInterface
        bDataInterface          3
      CDC Union:
        bMasterInterface        2
        bSlaveInterface         3
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               5
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        3
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x84  EP 4 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
    Interface Association:
      bLength                 8
      bDescriptorType        11
      bFirstInterface         4
      bInterfaceCount         2
      bFunctionClass          2 Communications
      bFunctionSubClass       2 Abstract (modem)
      bFunctionProtocol       1 AT-commands (v.25ter)
      iFunction               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        4
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         2 Communications
      bInterfaceSubClass      2 Abstract (modem)
      bInterfaceProtocol      1 AT-commands (v.25ter)
      iInterface              0
      CDC Header:
        bcdCDC               1.10
      CDC ACM:
        bmCapabilities       0x02
          line coding and serial state
      CDC Call Management:
        bmCapabilities       0x03
          call management
          use DataInterface
        bDataInterface          5
      CDC Union:
        bMasterInterface        4
        bSlaveInterface         5
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x85  EP 5 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               5
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        5
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x86  EP 6 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x03  EP 3 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
    Interface Association:
      bLength                 8
      bDescriptorType        11
      bFirstInterface         6
      bInterfaceCount         2
      bFunctionClass          2 Communications
      bFunctionSubClass       2 Abstract (modem)
      bFunctionProtocol       1 AT-commands (v.25ter)
      iFunction               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        6
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         2 Communications
      bInterfaceSubClass      2 Abstract (modem)
      bInterfaceProtocol      1 AT-commands (v.25ter)
      iInterface              0
      CDC Header:
        bcdCDC               1.10
      CDC ACM:
        bmCapabilities       0x02
          line coding and serial state
      CDC Call Management:
        bmCapabilities       0x03
          call management
          use DataInterface
        bDataInterface          7
      CDC Union:
        bMasterInterface        6
        bSlaveInterface         7
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x87  EP 7 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               5
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        7
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x88  EP 8 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x04  EP 4 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
    Interface Association:
      bLength                 8
      bDescriptorType        11
      bFirstInterface         8
      bInterfaceCount         2
      bFunctionClass          2 Communications
      bFunctionSubClass       0
      bFunctionProtocol       0
      iFunction               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        8
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         2 Communications
      bInterfaceSubClass      6 Ethernet Networking
      bInterfaceProtocol      0
      iInterface              0
      CDC Header:
        bcdCDC               1.10
      CDC Ethernet:
        iMacAddress                      1 00A0C6C14190
        bmEthernetStatistics    0x00000000
        wMaxSegmentSize              16384
        wNumberMCFilters            0x0001
        bNumberPowerFilters              0
      CDC Union:
        bMasterInterface        8
        bSlaveInterface         9
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x89  EP 9 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               5
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        9
      bAlternateSetting       0
      bNumEndpoints           0
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0
      iInterface              0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        9
      bAlternateSetting       1
      bNumEndpoints           2
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x8a  EP 10 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x05  EP 5 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass          239 Miscellaneous Device
  bDeviceSubClass         2 ?
  bDeviceProtocol         1 Interface Association
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0000
  (Bus Powered)

Signed-off-by: Giacinto Cifelli <gciofono@gmail.com>
Link: https://lore.kernel.org/r/20210126044245.8455-1-gciofono@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'locking-urgent-2021-01-28' of git://git./linux/kernel/git/tip/tip

Pull locking fixes from Thomas Gleixner:
 "A set of PI futex fixes:

   - Address a longstanding issue where the user space part of the PI
     futex is not writeable. The kernel returns with inconsistent state
     which can in the worst case result in a UAF of a tasks kernel
     stack.

     The solution is to establish consistent kernel state which makes
     future operations on the futex fail because user space and kernel
     space state are inconsistent. Not a problem as PI futexes
     fundamentaly require a functional RW mapping and if user space
     pulls the rug under it, then it can keep the pieces it asked for.

   - Address an issue where the return value is incorrect in case that
     the futex was acquired after a timeout/signal made the waiter drop
     out of the rtmutex wait.

     In one of the corner cases the kernel returned an error code
     despite having successfully acquired the futex"

* tag 'locking-urgent-2021-01-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  futex: Handle faults correctly for PI futexes
  futex: Simplify fixup_pi_state_owner()
  futex: Use pi_state_update_owner() in put_pi_state()
  rtmutex: Remove unused argument from rt_mutex_proxy_unlock()
  futex: Provide and use pi_state_update_owner()
  futex: Replace pointless printk in fixup_owner()
  futex: Ensure the correct return value from futex_lock_pi()

Merge tag 'nvme-5.11-2021-01-28' of git://git.infradead.org/nvme into block-5.11

Pull NVMe fixes from Christoph:

"nvme fixes for 5.11:

 - add another Write Zeroes quirk (Chaitanya Kulkarni)
 - handle a no path available corner case (Daniel Wagner)
 - use the proper RCU aware list_add helper (Chao Leng)"

* tag 'nvme-5.11-2021-01-28' of git://git.infradead.org/nvme:
  nvme-core: use list_add_tail_rcu instead of list_add_tail for nvme_init_ns_head
  nvme-multipath: Early exit if no path is available
  nvme-pci: add the DISABLE_WRITE_ZEROES quirk for a SPCC device

io_uring: fix sqo ownership false positive warning

WARNING: CPU: 0 PID: 21359 at fs/io_uring.c:9042
    io_uring_cancel_task_requests+0xe55/0x10c0 fs/io_uring.c:9042
Call Trace:
 io_uring_flush+0x47b/0x6e0 fs/io_uring.c:9227
 filp_close+0xb4/0x170 fs/open.c:1295
 close_files fs/file.c:403 [inline]
 put_files_struct fs/file.c:418 [inline]
 put_files_struct+0x1cc/0x350 fs/file.c:415
 exit_files+0x7e/0xa0 fs/file.c:435
 do_exit+0xc22/0x2ae0 kernel/exit.c:820
 do_group_exit+0x125/0x310 kernel/exit.c:922
 get_signal+0x427/0x20f0 kernel/signal.c:2773
 arch_do_signal_or_restart+0x2a8/0x1eb0 arch/x86/kernel/signal.c:811
 handle_signal_work kernel/entry/common.c:147 [inline]
 exit_to_user_mode_loop kernel/entry/common.c:171 [inline]
 exit_to_user_mode_prepare+0x148/0x250 kernel/entry/common.c:201
 __syscall_exit_to_user_mode_work kernel/entry/common.c:291 [inline]
 syscall_exit_to_user_mode+0x19/0x50 kernel/entry/common.c:302
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Now io_uring_cancel_task_requests() can be called not through file
notes but directly, remove a WARN_ONCE() there that give us false
positives. That check is not very important and we catch it in other
places.

Fixes: 84965ff8a84f0 ("io_uring: if we see flush on exit, cancel related tasks")
Cc: stable@vger.kernel.org # 5.9+
Reported-by: syzbot+3e3d9bd0c6ce9efbc3ef@syzkaller.appspotmail.com
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_uring: fix list corruption for splice file_get

kernel BUG at lib/list_debug.c:29!
Call Trace:
 __list_add include/linux/list.h:67 [inline]
 list_add include/linux/list.h:86 [inline]
 io_file_get+0x8cc/0xdb0 fs/io_uring.c:6466
 __io_splice_prep+0x1bc/0x530 fs/io_uring.c:3866
 io_splice_prep fs/io_uring.c:3920 [inline]
 io_req_prep+0x3546/0x4e80 fs/io_uring.c:6081
 io_queue_sqe+0x609/0x10d0 fs/io_uring.c:6628
 io_submit_sqe fs/io_uring.c:6705 [inline]
 io_submit_sqes+0x1495/0x2720 fs/io_uring.c:6953
 __do_sys_io_uring_enter+0x107d/0x1f30 fs/io_uring.c:9353
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

io_file_get() may be called from splice, and so REQ_F_INFLIGHT may
already be set.

Fixes: 02a13674fa0e8 ("io_uring: account io_uring internal files as REQ_F_INFLIGHT")
Cc: stable@vger.kernel.org # 5.9+
Reported-by: syzbot+6879187cf57845801267@syzkaller.appspotmail.com
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

amdgpu: fix clang build warning

clang warns about the -mhard-float command line arguments
on architectures that do not support this:

clang: error: argument unused during compilation: '-mhard-float' [-Werror,-Wunused-command-line-argument]

Move this into the gcc-specific arguments.

Fixes: e77165bf7b02 ("drm/amd/display: Add DCN3 blocks to Makefile")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amdgpu/swsmu: drop set_fan_speed_percent (v2)"

On some boards the rpm interface apparently does not work at all
leading to the fan not spinning or spinning at strange speeds.
Revert this for now to fix 5.10, 5.11.  The follow on patch
fixes this properly for 5.12.

This reverts commit 8d6e65adc25e23fabbc5293b6cd320195c708dca.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1408
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

nvme-core: use list_add_tail_rcu instead of list_add_tail for nvme_init_ns_head

The "list" of nvme_ns_head is used as rcu list, now in nvme_init_ns_head
list_add_tail is used to add ns->siblings to the rcu list. It is not safe.
Should use list_add_tail_rcu instead of list_add_tail.

Signed-off-by: Chao Leng <lengchao@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme-multipath: Early exit if no path is available

nvme_round_robin_path() should test if the return ns pointer is valid.
nvme_next_ns() will return a NULL pointer if there is no path left.

Fixes: 75c10e732724 ("nvme-multipath: round-robin I/O policy")
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme-pci: add the DISABLE_WRITE_ZEROES quirk for a SPCC device

This adds a quirk for SPCC 256GB NVMe 1.3 drive which fixes timeouts and
I/O errors due to the fact that the controller does not properly
handle the Write Zeroes command:

[ 2745.659527] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G            E 5.10.6-BET #1
[ 2745.659528] Hardware name: System manufacturer System Product Name/PRIME X570-P, BIOS 3001 12/04/2020
[ 2776.138874] nvme nvme1: I/O 414 QID 3 timeout, aborting
[ 2776.138886] nvme nvme1: I/O 415 QID 3 timeout, aborting
[ 2776.138891] nvme nvme1: I/O 416 QID 3 timeout, aborting
[ 2776.138895] nvme nvme1: I/O 417 QID 3 timeout, aborting
[ 2776.138912] nvme nvme1: Abort status: 0x0
[ 2776.138921] nvme nvme1: I/O 428 QID 3 timeout, aborting
[ 2776.138922] nvme nvme1: Abort status: 0x0
[ 2776.138925] nvme nvme1: Abort status: 0x0
[ 2776.138974] nvme nvme1: Abort status: 0x0
[ 2776.138977] nvme nvme1: Abort status: 0x0
[ 2806.346792] nvme nvme1: I/O 414 QID 3 timeout, reset controller
[ 2806.363566] nvme nvme1: 15/0/0 default/read/poll queues
[ 2836.554298] nvme nvme1: I/O 415 QID 3 timeout, disable controller
[ 2836.672064] blk_update_request: I/O error, dev nvme1n1, sector 16350 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0
[ 2836.672072] blk_update_request: I/O error, dev nvme1n1, sector 16093 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0
[ 2836.672074] blk_update_request: I/O error, dev nvme1n1, sector 15836 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0
[ 2836.672076] blk_update_request: I/O error, dev nvme1n1, sector 15579 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0
[ 2836.672078] blk_update_request: I/O error, dev nvme1n1, sector 15322 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0
[ 2836.672080] blk_update_request: I/O error, dev nvme1n1, sector 15065 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0
[ 2836.672082] blk_update_request: I/O error, dev nvme1n1, sector 14808 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0
[ 2836.672083] blk_update_request: I/O error, dev nvme1n1, sector 14551 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0
[ 2836.672085] blk_update_request: I/O error, dev nvme1n1, sector 14294 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0
[ 2836.672087] blk_update_request: I/O error, dev nvme1n1, sector 14037 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0
[ 2836.672121] nvme nvme1: failed to mark controller live state
[ 2836.672123] nvme nvme1: Removing after probe failure status: -19
[ 2836.689016] Aborting journal on device dm-0-8.
[ 2836.689024] Buffer I/O error on dev dm-0, logical block 25198592, lost sync page write
[ 2836.689027] JBD2: Error -5 detected when updating journal superblock for dm-0-8.

Reported-by: Bradley Chapman <chapman6235@comcast.net>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Tested-by: Bradley Chapman <chapman6235@comcast.net>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>