drm/i915/pcode: Init pcode on different gt's

Extend pcode initialization to pcode on different gt's.

Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4de1e4fd71a2971549c5cfb185412f190f15e235.1653484574.git.ashutosh.dixit@intel.com

drm/i915/gt: Add media freq factor to per-gt sysfs

Expose new sysfs to program and retrieve media freq factor. Factor values
of 0 (dynamic), 0.5 and 1.0 are supported via a u8.8 fixed point
representation (corresponding to integer values of 0, 128 and 256
respectively).

Media freq factor is converted to media_ratio_mode for GuC. It is
programmed into GuC using H2G SLPC interface. It is retrieved from GuC
through a register read. A cached media_ratio_mode is maintained to
preserve set values across GuC resets.

This patch adds the following sysfs files to gt/gtN sysfs:
* media_freq_factor
* media_freq_factor.scale

v2: Minor wording change in drm_warn (Tvrtko)

Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Dale B Stimson <dale.b.stimson@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7ad7578335d8af9cba047b4bcf33d1887453d2e1.1653484574.git.ashutosh.dixit@intel.com

drm/i915/reset: Fix error_state_read ptr + offset use

Fix our pointer offset usage in error_state_read
when there is no i915_gpu_coredump but buf offset
is non-zero.

This fixes a kernel page fault can happen when
multiple tests are running concurrently in a loop
and one is producing engine resets and consuming
the i915 error_state dump while the other is
forcing full GT resets. (takes a while to trigger).

The dmesg call trace:

[ 5590.803000] BUG: unable to handle page fault for address:
               ffffffffa0b0e000
[ 5590.803009] #PF: supervisor read access in kernel mode
[ 5590.803013] #PF: error_code(0x0000) - not-present page
[ 5590.803016] PGD 5814067 P4D 5814067 PUD 5815063 PMD 109de4067
               PTE 0
[ 5590.803022] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ 5590.803026] CPU: 5 PID: 13656 Comm: i915_hangman Tainted: G U
                    5.17.0-rc5-ups69-guc-err-capt-rev6+ #136
[ 5590.803033] Hardware name: Intel Corporation Alder Lake Client
                    Platform/AlderLake-M LP4x RVP, BIOS ADLPFWI1.R00.
                    3031.A02.2201171222 01/17/2022
[ 5590.803039] RIP: 0010:memcpy_erms+0x6/0x10
[ 5590.803045] Code: fe ff ff cc eb 1e 0f 1f 00 48 89 f8 48 89 d1
                     48 c1 e9 03 83 e2 07 f3 48 a5 89 d1 f3 a4 c3
                     66 0f 1f 44 00 00 48 89 f8 48 89 d1 <f3> a4
                     c3 0f 1f 80 00 00 00 00 48 89 f8 48 83 fa 20
                     72 7e 40 38 fe
[ 5590.803054] RSP: 0018:ffffc90003a8fdf0 EFLAGS: 00010282
[ 5590.803057] RAX: ffff888107ee9000 RBX: ffff888108cb1a00
               RCX: 0000000000000f8f
[ 5590.803061] RDX: 0000000000001000 RSI: ffffffffa0b0e000
               RDI: ffff888107ee9071
[ 5590.803065] RBP: 0000000000000000 R08: 0000000000000001
               R09: 0000000000000001
[ 5590.803069] R10: 0000000000000001 R11: 0000000000000002
               R12: 0000000000000019
[ 5590.803073] R13: 0000000000174fff R14: 0000000000001000
               R15: ffff888107ee9000
[ 5590.803077] FS: 00007f62a99bee80(0000) GS:ffff88849f880000(0000)
               knlGS:0000000000000000
[ 5590.803082] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 5590.803085] CR2: ffffffffa0b0e000 CR3: 000000010a1a8004
               CR4: 0000000000770ee0
[ 5590.803089] PKRU: 55555554
[ 5590.803091] Call Trace:
[ 5590.803093] <TASK>
[ 5590.803096] error_state_read+0xa1/0xd0 [i915]
[ 5590.803175] kernfs_fop_read_iter+0xb2/0x1b0
[ 5590.803180] new_sync_read+0x116/0x1a0
[ 5590.803185] vfs_read+0x114/0x1b0
[ 5590.803189] ksys_read+0x63/0xe0
[ 5590.803193] do_syscall_64+0x38/0xc0
[ 5590.803197] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 5590.803201] RIP: 0033:0x7f62aaea5912
[ 5590.803204] Code: c0 e9 b2 fe ff ff 50 48 8d 3d 5a b9 0c 00 e8 05
                     19 02 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25
                     18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff
                     ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24
[ 5590.803213] RSP: 002b:00007fff5b659ae8 EFLAGS: 00000246
               ORIG_RAX: 0000000000000000
[ 5590.803218] RAX: ffffffffffffffda RBX: 0000000000100000
               RCX: 00007f62aaea5912
[ 5590.803221] RDX: 000000000008b000 RSI: 00007f62a8c4000f
               RDI: 0000000000000006
[ 5590.803225] RBP: 00007f62a8bcb00f R08: 0000000000200010
               R09: 0000000000101000
[ 5590.803229] R10: 0000000000000001 R11: 0000000000000246
               R12: 0000000000000006
[ 5590.803233] R13: 0000000000075000 R14: 00007f62a8acb010
               R15: 0000000000200000
[ 5590.803238] </TASK>
[ 5590.803240] Modules linked in: i915 ttm drm_buddy drm_dp_helper
                        drm_kms_helper syscopyarea sysfillrect sysimgblt
                        fb_sys_fops prime_numbers nfnetlink br_netfilter
                        overlay mei_pxp mei_hdcp x86_pkg_temp_thermal
                        coretemp kvm_intel snd_hda_codec_hdmi snd_hda_intel
                        snd_intel_dspcfg snd_hda_codec snd_hwdep
                        snd_hda_core snd_pcm mei_me mei fuse ip_tables
                        x_tables crct10dif_pclmul e1000e crc32_pclmul ptp
                        i2c_i801 ghash_clmulni_intel i2c_smbus pps_core
                        [last unloa ded: ttm]
[ 5590.803277] CR2: ffffffffa0b0e000
[ 5590.803280] ---[ end trace 0000000000000000 ]---

Fixes: 0e39037b3165 ("drm/i915: Cache the error string")
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220311004311.514198-2-alan.previn.teres.alexis@intel.com

drm/i915/hwconfig: Future-proof platform checks

PVC also has a hwconfig table.  Actually the current expectation is that
all future platforms will have hwconfig, so let's just change the
condition to an IP version check so that we don't need to keep updating
this for each new platform that shows up.

Cc: John Harrison <john.c.harrison@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220524235906.529771-1-matthew.d.roper@intel.com

drm/i915/hwconfig: Report no hwconfig support on ADL-N

ADL-N being a subplatform of ADL-P, it lacks support for hwconfig
table. Explicit check added to skip ADL-N.

Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220523075116.207677-1-balasubramani.vivekanandan@intel.com

drm/i915/guc: XEHPSDV and PVC do not use HuC

Disable HuC loading since it is not used on these platforms.

Cc: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220511060228.1179450-6-matthew.d.roper@intel.com

drm/i915/pvc: Add new BCS engines to GuC engine list

Initialize ADS system info to reflect the availability of new BCS
engines

Original-author: CQ Tang
Cc: Stuart Summers <stuart.summers@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220511060228.1179450-5-matthew.d.roper@intel.com

drm/i915/pvc: Remove additional 3D flags from PIPE_CONTROL

Although we already strip 3D-specific flags from PIPE_CONTROL
instructions when submitting to a compute engine, there are some
additional flags that need to be removed when the platform as a whole
lacks a 3D pipeline.  Add those restrictions here.

v2:
 - Replace LACKS_3D_PIPELINE checks with !HAS_3D_PIPELINE and add
   has_3d_pipeline to all platforms except PVC.  (Lucas)

Bspec: 47112
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220511060228.1179450-4-matthew.d.roper@intel.com

drm/i915/pvc: Add forcewake support

Add PVC's forcewake ranges.

v2:
 - Drop replicated comment completely; move general cleanup of the
   documentation to a separate patch.

Bspec: 67609
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220511060228.1179450-3-matthew.d.roper@intel.com

drm/i915/uncore: Reorganize and document shadow and forcewake tables

Let's reorganize some of the forcewake/shadow handling in intel_uncore.c
and consolidate the cargo-cult comments on each table into more general
comments that apply to all tables.

We'll probably move forcewake handling to its own dedicated file in the
near future and further enhance this with true kerneldoc.  But this is a
good intermediate step to help clarify the behavior a bit.

Cc: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220511060228.1179450-2-matthew.d.roper@intel.com

drm/i915: Update tiled blits selftest

Update the selftest to include Tile 4 mode and switch to Tile 4 on
platforms that supports Tile 4 but no Tile Y and vice versa.
Also switch to XY_FAST_COPY_BLT on platforms that supports it.

v4: update commit message to reflect the code changes properly.
v3: add a function to find X-tile availability for a platform.
v2: disable Tile X for iGPU in fastblit and
    fix checkpath --strict warnings.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5879
Signed-off-by: Bommu Krishnaiah <krishnaiah.bommu@intel.com>
Co-developed-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Zbigniew Kempczyński <zbigniew.kempczynski@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220516082015.32020-1-nirmoy.das@intel.com

Merge tag 'drm-intel-next-2022-05-20' of git://anongit.freedesktop.org/drm/drm-intel into drm-intel-gt-next

drm/i915 drm-intel-next -> drm-intel-gt-next cross-merge sync

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
# Conflicts:
# drivers/gpu/drm/i915/gt/intel_rps.c
# drivers/gpu/drm/i915/i915_vma.c
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87y1ywbh5y.fsf@intel.com

drm/i915/pcode: Add a couple of pcode helpers

Some dGfx pcode commands take additional sub-commands and parameters. Add a
couple of helpers to help formatting these commands to improve code
readability.

v2: Fixed commit author (Rodrigo)
v3: Function rename and convert to new uncore interface for pcode functions
    Remove unnecessary #define's (Andi)
v4: Another function rename

Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Dale B Stimson <dale.b.stimson@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220519085732.1276255-3-tvrtko.ursulin@linux.intel.com

drm/i915/pcode: Extend pcode functions for multiple gt's

Each gt contains an independent instance of pcode. Extend pcode functions
to interface with pcode on different gt's. To avoid creating dependency of
display functionality on intel_gt, pcode function interfaces are exposed in
terms of uncore rather than intel_gt. Callers have been converted to pass
in the appropritate (i915 or intel_gt) uncore to the pcode functions.

v2: Expose pcode functions in terms of uncore rather than gt (Jani/Rodrigo)
v3: Retain previous function names to eliminate needless #defines (Rodrigo)
v4: Move out i915_pcode_init() to a separate patch (Tvrtko)
    Remove duplicated drm_err/drm_dbg from intel_pcode_init() (Tvrtko)

Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220519085732.1276255-2-tvrtko.ursulin@linux.intel.com
[tursulin: fixup merge conflict]

drm/i915: Introduce has_media_ratio_mode

Media ratio mode (the ability for media IP to work at a different frequency
from the GT) is available for a subset of dGfx platforms supporting
GuC/SLPC. Introduce 'has_media_ratio_mode' flag in intel_device_info to
identify these platforms and set it for XEHPSDV and DG2/ATS-M.

Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220519085732.1276255-1-tvrtko.ursulin@linux.intel.com
[tursulin: fixup merge conflict]

Revert "drm/i915: Drop has_gt_uc from device info"

This reverts commit 222ff6db8a0dcb86f2bb65fc8656aec635a737a6.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220519090802.1294691-8-tvrtko.ursulin@linux.intel.com

Revert "drm/i915: Drop has_rc6 from device info"

This reverts commit 218076abbcd647de46635d21331a34b814f90906.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220519090802.1294691-7-tvrtko.ursulin@linux.intel.com

Revert "drm/i915: Drop has_reset_engine from device info"

This reverts commit 922abe4d19bd21b38298f3902674774b92a49293.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220519090802.1294691-6-tvrtko.ursulin@linux.intel.com

Revert "drm/i915: Drop has_logical_ring_elsq from device info"

This reverts commit b6411373d3954c8fe4617c27f90f773108b0ab03.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220519090802.1294691-5-tvrtko.ursulin@linux.intel.com

Revert "drm/i915: Drop has_ddi from device info"

This reverts commit efd01cd3c27636bc4840057a03839e54abaf11dc.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220519090802.1294691-4-tvrtko.ursulin@linux.intel.com

Revert "drm/i915: Drop has_dp_mst from device info"

This reverts commit eb86f645ab9b90c47de7ebe229feae7ac999421b.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220519090802.1294691-3-tvrtko.ursulin@linux.intel.com

Revert "drm/i915: Drop has_psr from device info"

This reverts commit b15a7357a84f091fde8ce35bf2fd494150ad4bd0.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220519090802.1294691-2-tvrtko.ursulin@linux.intel.com

drm/i915/dg2: Extend Wa_22010954014 to DG2-G11 and DG2-G12

Signed-off-by: Swathi Dhanavanthri <swathi.dhanavanthri@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220517201338.7291-1-swathi.dhanavanthri@intel.com

drm/i915/dg2: Add workaround 22014600077

Signed-off-by: Swathi Dhanavanthri <swathi.dhanavanthri@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220517212905.24212-1-swathi.dhanavanthri@intel.com

drm/i915/uc: Fix undefined behavior due to shift overflowing the constant

Fix:

  In file included from <command-line>:0:0:
  drivers/gpu/drm/i915/gt/uc/intel_guc.c: In function ‘intel_guc_send_mmio’:
  ././include/linux/compiler_types.h:352:38: error: call to ‘__compiletime_assert_1047’ \
  declared with attribute error: FIELD_PREP: mask is not constant
    _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)

and other build errors due to shift overflowing values.

See https://lore.kernel.org/r/YkwQ6%2BtIH8GQpuct@zn.tnic for the gory
details as to why it triggers with older gccs only.

v2 by Jani:
- Drop the i915_reg.h changes

Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Ruiqi GONG <gongruiqi1@huawei.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220518113315.1305027-2-jani.nikula@intel.com

drm/i915/reg: fix undefined behavior due to shift overflowing the constant

Use REG_GENMASK() and REG_FIELD_PREP() to avoid errors due to
-fsanitize=shift.

References: https://lore.kernel.org/r/20220405151517.29753-12-bp@alien8.de
Reported-by: Borislav Petkov <bp@suse.de>
Reported-by: Ruiqi GONG <gongruiqi1@huawei.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220518113315.1305027-1-jani.nikula@intel.com

drm/i915/gt: Fix use of static in macro mismatch

The INTEL_GT_RPS_SYSFS_ATTR was creating to different structures
but. When called with the "static" keyword this is affecting only
the first structure, while the second is created as non static.

Move the static keyword inside the macros to affect both the
structures.

Reported-by: Jani Nikula <jani.nikula@linux.intel.com>
Fixes: 56a709cf77468 ("drm/i915/gt: Create per-tile RPS sysfs interfaces")
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220510140447.80200-1-andi.shyti@linux.intel.com

drm/i915: Use i915_gem_object_ggtt_pin_ww for reloc_iomap

When removing short term pins, I've changed the the batch buffer
pinning for relocation to use __i915_vma_pin, because
i915_gem_object_ggtt_pin_ww was destroying the old vma. This
caused regressions, because the functions are not identical.

Fix the regressions by calling i915_gem_object_ggtt_pin_ww() again
on ggtt-only platforms, but only if the batch can be pinned without
being moved.

Fixes: b5cfe6f7a6e1 ("drm/i915: Remove short-term pins from execbuf, v6.")
Cc: Matthew Auld <matthew.auld@intel.com>
Reported-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Matthew Auld <matthew.auld@intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5806
Link: https://patchwork.freedesktop.org/patch/msgid/20220511115219.46507-1-maarten.lankhorst@linux.intel.com

uapi/drm/i915: Document memory residency and Flat-CCS capability of obj

Capture the impact of memory region preference list of the objects, on
their memory residency and Flat-CCS capability.

v2:
  Fix the Flat-CCS capability of an obj with {lmem, smem} preference
  list [Thomas]
v3:
  Reworded the doc [Matt]
v4:
  Fixed Typos and spelling mistakes [Tvrtko, Joonas]

Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
cc: Matthew Auld <matthew.auld@intel.com>
cc: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
cc: Daniel Vetter <daniel.vetter@ffwll.ch>
cc: Jon Bloomfield <jon.bloomfield@intel.com>
cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
cc: Kenneth Graunke <kenneth@whitecape.org>
cc: mesa-dev@lists.freedesktop.org
cc: Jordan Justen <jordan.l.justen@intel.com>
cc: Tony Ye <tony.ye@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220502141508.2327-1-ramalingam.c@intel.com

drm/i915/guc: Remove unnecessary GuC err capture noise

GuC error capture blurts some debug messages about empty
register lists for certain register types on engines during
firmware initialization.

These are not errors or warnings, so get rid of them.

Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220507045847.862261-2-alan.previn.teres.alexis@intel.com

drm/i915: gracefully error out on platform with small-bar

Currently we just fatally crash during module load if we encounter
small-BAR configuration on DG2. We have most of the support already, but
we lack the final uAPI bits to tie it all together.

Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
[mauld: reword the commit and error message slightly]
Link: https://patchwork.freedesktop.org/patch/msgid/20220511153746.14142-3-nirmoy.das@intel.com

drm/i915: determine lmem_size properly

Determine lmem_size using ADDR_RANGE register so that lmem_setup()
works on platform with small-bar as well.

Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220511153746.14142-2-nirmoy.das@intel.com

drm/i915: return -EIO on lmem setup failure

Caller of setup_lmem() ignores -ENODEV but failing
to setup lmem on dGPU isn't ignorable error.

Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220511153746.14142-1-nirmoy.das@intel.com

drm/i915: Ensure damage clip area is within pipe area

Current update area calculation is not handling situation where
e.g. cursor plane is fully or partially outside pipe area.

Fix this by checking damage area against pipe_src area using
drm_rect_intersect.

v2: Set x1 and x2 in damaged_area initialization
v3: Move drm_rect_intersect into clip_area_update
v4: draw_area -> pipe_src

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5440
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220513142811.779331-3-jouni.hogander@intel.com

drm/i915/psr: Use full update In case of area calculation fails

Currently we have some corner cases where area calculation fails.  For
these sel fetch area calculation ends up having update area as y1 = 0,
y2 = 4. Instead of these values safer option is full update.

One of such for example is big fb with offset. We don't have usable
offset in psr2_sel_fetch_update. Currently it's open what is the
proper way to fix this corner case. Use full update for now.

v2: Commit message modified
v3: Print out debug info once when area calculation fails
v4: Use drm_info_once
v5: pipeA -> "pipe %c", pipe_name(crtc-pipe)

Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220513142811.779331-2-jouni.hogander@intel.com

drm/i915: Use drm_dbg for rpm logging

RPM suspend/resume also supported on gfx platforms which doesn't have
kms support and even on platforms without any connected display panel.
There is no good reason to log rpm suspend/resume debug message with
drm_dbg_kms() therefore changing it to drm_dbg().

Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220511130455.22028-1-anshuman.gupta@intel.com

drm/i915/guc/rc: Use i915_probe_error instead of drm_error

To avoid false positives in error injection cases.

Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220506054142.5025-1-vinay.belgaumkar@intel.com

drm/i915/audio: fix audio code enable/disable pipe logging

Need to use pipe_name(pipe) instead of pipe directly.

Fixes: 1f31e35f2e88 ("drm/i915/audio: unify audio codec enable/disable debug logging")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220512161638.272601-1-jani.nikula@intel.com

drm/i915: Fix CFI violation with show_dynamic_id()

When an attribute group is created with sysfs_create_group(), the
->sysfs_ops() callback is set to kobj_sysfs_ops, which sets the ->show()
callback to kobj_attr_show(). kobj_attr_show() uses container_of() to
get the ->show() callback from the attribute it was passed, meaning the
->show() callback needs to be the same type as the ->show() callback in
'struct kobj_attribute'.

However, show_dynamic_id() has the type of the ->show() callback in
'struct device_attribute', which causes a CFI violation when opening the
'id' sysfs node under drm/card0/metrics. This happens to work because
the layout of 'struct kobj_attribute' and 'struct device_attribute' are
the same, so the container_of() cast happens to allow the ->show()
callback to still work.

Change the type of show_dynamic_id() to match the ->show() callback in
'struct kobj_attributes' and update the type of sysfs_metric_id to
match, which resolves the CFI violation.

Fixes: f89823c21224 ("drm/i915/perf: Implement I915_PERF_ADD/REMOVE_CONFIG interface")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220513075136.1027007-1-tvrtko.ursulin@linux.intel.com

drm/i915/dmc: Add MMIO range restrictions

Bspec has added some steps that check forDMC MMIO range before
programming them

v2: Fix for CI
v3: move register defines to .h (Anusha)
- Check MMIO restrictions per pipe
- Add MMIO restricton for v1 dmc header as well (Lucas)
v4: s/_PICK/_PICK_EVEN and use it only for Pipe DMC scenario.
- clean up sanity check logic.(Lucas)
- Add MMIO range for RKL as well.(Anusha)
v5: Use DISPLAY_VER instead of per platform check (Lucas)

BSpec: 49193

Cc: stable@vger.kernel.org
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220511000847.1068302-1-anusha.srivatsa@intel.com

i915/guc/reset: Make __guc_reset_context aware of guilty engines

There are 2 ways an engine can get reset in i915 and the method of reset
affects how KMD labels a context as guilty/innocent.

(1) GuC initiated engine-reset: GuC resets a hung engine and notifies
KMD. The context that hung on the engine is marked guilty and all other
contexts are innocent. The innocent contexts are resubmitted.

(2) GT based reset: When an engine heartbeat fails to tick, KMD
initiates a gt/chip reset. All active contexts are marked as guilty and
discarded.

In order to correctly mark the contexts as guilty/innocent, pass a mask
of engines that were reset to __guc_reset_context.

Fixes: eb5e7da736f3 ("drm/i915/guc: Reset implementation for new GuC interface")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220426003045.3929439-1-umesh.nerlige.ramappa@intel.com

drm/i915: Fix 'mixing different enum types' warnings in intel_display_power.c

Fix the following sparse warnings:

drivers/gpu/drm/i915/display/intel_display_power.c:2431:34: warning: mixing different enum types:
drivers/gpu/drm/i915/display/intel_display_power.c:2431:34:    unsigned int enum intel_display_power_domain
drivers/gpu/drm/i915/display/intel_display_power.c:2431:34:    int enum port
drivers/gpu/drm/i915/display/intel_display_power.c:2442:37: warning: mixing different enum types:
drivers/gpu/drm/i915/display/intel_display_power.c:2442:37:    unsigned int enum intel_display_power_domain
drivers/gpu/drm/i915/display/intel_display_power.c:2442:37:    int enum port
drivers/gpu/drm/i915/display/intel_display_power.c:2468:43: warning: mixing different enum types:
drivers/gpu/drm/i915/display/intel_display_power.c:2468:43:    unsigned int enum intel_display_power_domain
drivers/gpu/drm/i915/display/intel_display_power.c:2468:43:    unsigned int enum aux_ch
drivers/gpu/drm/i915/display/intel_display_power.c:2479:35: warning: mixing different enum types:
drivers/gpu/drm/i915/display/intel_display_power.c:2479:35:    unsigned int enum intel_display_power_domain
drivers/gpu/drm/i915/display/intel_display_power.c:2479:35:    unsigned int enum aux_ch

Fixes: 979e1b32e0e2 ("drm/i915: Sanitize the port -> DDI/AUX power domain mapping for each platform")
Reported-by: Jani Nikula <jani.nikula@intel.com>
Cc: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220510114957.406070-1-imre.deak@intel.com

drm/i915/dmc: Load DMC on DG2

Add Support for DC states on Dg2.

v2: Add dc9 as the max supported DC states and disable DC5.
v3: set max_dc to 0. (Imre)

Cc: Imre Deak <imre.deak@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>(v1)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504202213.740200-2-anusha.srivatsa@intel.com

drm/i915/pvc: read fuses for link copy engines

The new Link Copy engines in PVC may be fused off according to the
mslice_mask. Each bit of the MEML3_EN_MASK we read from the
GEN10_MIRROR_FUSE3 register disables a pair of link copy engines.

v2 (Tvrtko):
 - Minor cosmetic changes: s/u8/unsigned long/, use instance local
   variable.  (Tvrtko)

Bspec: 44483
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505213812.3979301-13-matthew.d.roper@intel.com

drm/i915/pvc: skip all copy engines from aux table invalidate

As we have more copy engines now, mask all of them from aux table
invalidate.

v2 (MattR):
 - Use I915_MAX_BCS to determine mask rather than hardcoding BCS8.
   (Prathap)

Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505213812.3979301-12-matthew.d.roper@intel.com

drm/i915/pvc: Reset support for new copy engines

Add the reset support for new copy engines in PVC.

Bspec: 52549
Original-author: CQ Tang
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505213812.3979301-11-matthew.d.roper@intel.com

drm/i915/pvc: Interrupt support for new copy engines

Add the interrupt handler support for new copy engines.

Bspec: 54030
Original-author: CQ Tang
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505213812.3979301-10-matthew.d.roper@intel.com

drm/i915/pvc: Engine definitions for new copy engines

This patch adds the basic definitions needed to support
new copy engines. Also updating the cmd_info to accommodate
new engines, as the engine id's of legacy engines have been
changed.

v2:
 - Add _BCS(n) definition, similar to other engines.  (Tvrtko)
 - Add I915_MAX_BCS definition, similar to other engnes.  (Prathap)
 - Move GVT change to avoid u16 overflow to its own patch.  (Tvrtko)

Original-author: CQ Tang
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505213812.3979301-9-matthew.d.roper@intel.com

drm/i915/gvt: Use intel_engine_mask_t for ring mask

When i915 adds additional PVC blitter instances (in an upcoming patch),
the definition of VECS0 will change from bit(10) to bit(18), causing
GVT's R_ALL mask to overflow the u16 storage that's currently used.
Let's replace the u16 with an intel_engine_mask_t to ensure we avoid
this.

Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505213812.3979301-8-matthew.d.roper@intel.com

drm/i915/pvc: Reduce stack usage in reset selftest with extra blitter engine

PVC adds extra blitter engines (in the following patch). The reset
selftest has a local array on the stack which is sized by the number
of engines. The increase pushes the size of this array to the point
where it trips the 'stack too large' compile warning. This patch takes
the allocation of the stack and makes it dynamic instead.

v2 (MattR):
 - Minor cosmetic changes:  re-sort definition and allocate using
   kmalloc_array().  (Tvrtko)

Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505213812.3979301-7-matthew.d.roper@intel.com

drm/i915/pvc: Read correct RP_STATE_CAP register

The SoC registers, including RP_STATE_CAP, have moved to a new location
in GTTMMADR on Ponte Vecchio.  We need to update the register offset
accordingly.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505213812.3979301-5-matthew.d.roper@intel.com

drm/i915/pvc: Define MOCS table for PVC

v2 (MattR):
 - Clarify comment above RING_CMD_CCTL programming.
 - Remove bspec reference from field definition.  (Lucas)
 - Add WARN if we try to use a (presumably uninitialized) wb_index of 0.
   On most platforms 0 is an invalid MOCS entry and even on the ones
   where it isn't, it isn't the right setting for wb_index.  (Lucas)

Bspec: 45101, 72161
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Ayaz A Siddiqui <ayaz.siddiqui@intel.com>
Signed-off-by: Fei Yang <fei.yang@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505213812.3979301-4-matthew.d.roper@intel.com

drm/i915/gem: Make drop_pages() return bool

Commit e4e806253003 ("drm/i915: Change shrink ordering to use locking
around unbinding.") changed the return type to int without changing the
return values or their meaning to "0 is success". Move it back to
boolean.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220503061556.513175-1-lucas.demarchi@intel.com

drm/i915: Only setup private tmpfs mount when needed and fix logging

If i915 does not want to use huge pages there is a) no point in setting up
the private mount and b) should former fail, it is misleading to log THP
support is disabled in the caller, which does not even know if callee
tried to enable it.

Fix both by restructuring the flow in i915_gemfs_init and at the same time
note the failure to set it up in all cases.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Eero Tamminen <eero.t.tamminen@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220429100414.647857-2-tvrtko.ursulin@linux.intel.com

drm/i915: Enable THP on Icelake and beyond

We have a statement from HW designers that the GPU read regression when
using 2M pages was fixed from Icelake onwards, which was also confirmed
by bencharking Eero did last year:

"""
When IOMMU is disabled, enabling THP causes following perf changes on
TGL-H (GT1):

    10-15% SynMark Batch[0-3]
    5-10% MemBW GPU texture, SynMark ShMapVsm
    3-5% SynMark TerrainFly* + Geom* + Fill* + CSCloth + Batch4
    1-3% GpuTest Triangle, SynMark TexMem* + DeferredAA + Batch[5-7]
          + few others
    -7% MemBW GPU blend

In the above 3D benchmark names, * means all the variants of tests with
the same prefix. For example "SynMark TexMem*", means both TexMem128 &
TexMem512 tests in the synthetic (Intel internal) SynMark test suite.

In the (public, but proprietary) GfxBench & GLB(enchmark) test suites,
there are both onscreen and offscreen variants of each test. Unless
explicitly stated otherwise, numbers are for both variants.

All tests are run with FullHD monitor. All tests are fullscreen except
for GLB and GpuTest ones, which are run in 1/2 screen window (GpuTest
triangle is run both in fullscreen and 1/2 screen window).
"""

Since the only regression is MemBW GPU blend, against many more gains,
it sounds it is time to enable THP on Gen11+.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
References: https://gitlab.freedesktop.org/drm/intel/-/issues/430
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Eero Tamminen <eero.t.tamminen@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220429100414.647857-1-tvrtko.ursulin@linux.intel.com

drm/i915: remove single-use GEM_DEBUG_EXEC()

Reduce the magic of what's going on in GEM_DEBUG_EXEC() by expanding it
inline and being explicit about it. It's as single use case anyway, so
the macro feels overkill.

Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504183716.987793-2-jani.nikula@intel.com

drm/i915: remove unused GEM_DEBUG_DECL() and GEM_DEBUG_BUG_ON()

There are already too many choices here, take away the unused ones.

Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504183716.987793-1-jani.nikula@intel.com

drm/i915: Drop has_psr from device info

No need to have this parameter in intel_device_info struct
as all platforms with display version 9 or newer has this feature.

As a side effect of the of removal this flag, it will not be printed
in dmesg during driver load anymore and developers will have to rely
on to check the macro and compare with platform being used and IP
versions of it.

Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505193524.276400-7-jose.souza@intel.com

drm/i915: Drop has_dp_mst from device info

No need to have this parameter in intel_device_info struct
as the requirement to support it is the DDI support.

As a side effect of the of removal this flag, it will not be printed
in dmesg during driver load anymore and developers will have to rely
on to check the macro and compare with platform being used and IP
versions of it.

Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505193524.276400-6-jose.souza@intel.com

drm/i915: Drop has_ddi from device info

No need to have this parameter in intel_device_info struct
as all platforms with display version 9 or newer, haswell or broadwell
supports it.

As a side effect of the of removal this flag, it will not be printed
in dmesg during driver load anymore and developers will have to rely
on to check the macro and compare with platform being used and IP
versions of it.

Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505193524.276400-5-jose.souza@intel.com

drm/i915: Drop has_logical_ring_elsq from device info

No need to have this parameter in intel_device_info struct
as all platforms with graphics version 11 or newer has this feature.

As a side effect of the of removal this flag, it will not be printed
in dmesg during driver load anymore and developers will have to rely
on to check the macro and compare with platform being used and IP
versions of it.

Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505193524.276400-4-jose.souza@intel.com

drm/i915: Drop has_reset_engine from device info

No need to have this parameter in intel_device_info struct
as all platforms with graphics version 7 or newer can reset engines.

As a side effect of the of removal this flag, it will not be printed
in dmesg during driver load anymore and developers will have to rely
on to check the macro and compare with platform being used and IP
versions of it.

Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505193524.276400-3-jose.souza@intel.com

drm/i915: Drop has_rc6 from device info

No need to have this parameter in intel_device_info struct
as all platforms with graphics version 6 or newer have software
support for this feature.

As a side effect of the of removal this flag, it will not be printed
in dmesg during driver load anymore and developers will have to rely
on to check the macro and compare with platform being used and IP
versions of it.

Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505193524.276400-2-jose.souza@intel.com

drm/i915: Drop has_gt_uc from device info

No need to have this parameter in intel_device_info struct
as all platforms with graphics version 9 or newer has graphics
microcontroller.

As a side effect of the of removal this flag, it will not be printed
in dmesg during driver load anymore and developers will have to rely
on to check the macro and compare with platform being used and IP
versions of it.

Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505193524.276400-1-jose.souza@intel.com

drm/i915/gt: Fix build error without CONFIG_PM

drivers/gpu/drm/i915/gt/intel_gt_sysfs_pm.c: In function ‘act_freq_mhz_show’:
drivers/gpu/drm/i915/gt/intel_gt_sysfs_pm.c:276:20: error: implicit declaration of function ‘sysfs_gt_attribute_r_max_func’ [-Werror=implicit-function-declaration]
  276 |  u32 actual_freq = sysfs_gt_attribute_r_max_func(dev, attr,
      |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Move sysfs_gt_attribute_* macros out of #ifdef block to fix this.

Fixes: 56a709cf7746 ("drm/i915/gt: Create per-tile RPS sysfs interfaces")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220506032652.1856-1-yuehaibing@huawei.com

drm/i915: Don't use DRM_DEBUG_WARN_ON for ring unexpectedly not idle

DRM_DEBUG_WARN_ON should only be used when we are certain CI is guaranteed
to exercise a certain code path, so in case of values coming from MMIO
reads we cannot be sure CI will have all the possible SKUs and parts, or
that it will catch all possible error conditions. Use drm_warn instead.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505110007.943449-2-tvrtko.ursulin@linux.intel.com

drm/i915: Don't use DRM_DEBUG_WARN_ON for unexpected l3bank/mslice config

DRM_DEBUG_WARN_ON should only be used when we are certain CI is guaranteed
to exercise a certain code path, so in case of values coming from MMIO
reads we cannot be sure CI will have all the possible SKUs and parts.

Use drm_warn instead and move logging to init phase while at it.

v2:
 * GEM_WARN_ON in intel_gt_get_valid_steering.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505110007.943449-1-tvrtko.ursulin@linux.intel.com

drm/i915/huc: Don't fail the probe if HuC init fails

The previous patch introduced new failure cases in the HuC init flow
that can be hit by simply changing the config, so we want to avoid
failing the probe in those scenarios. HuC load failure is already
considered a non-fatal error and we have a way to report to userspace
if the HuC is not available via a dedicated getparam, so no changes
in expectation there.
The error message in the HuC init code has also been lowered to info to
avoid throwing error message for an expected behavior.

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504204816.2082588-5-daniele.ceraolospurio@intel.com

drm/i915/huc: Prepare for GSC-loaded HuC

HuC loading via GSC is performed via a PXP command sent through the mei
modules, so we need both MEI_GSC and MEI_PXP to be available. Given that
the GSC will do both the transfer and the authentication, the legacy HuC
loading paths can be safely skipped.
Also note that the GSC-loaded HuC survives GT reset.

v2: move the huc_is_authenticated() function to this patch.

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504204816.2082588-4-daniele.ceraolospurio@intel.com

drm/i915/huc: Add fetch support for gsc-loaded HuC binary

On newer platforms (starting DG2 G10 B-step and G11 A-step), ownership of
HuC loading has been moved from the GuC to the GSC. As part of the
change, the header format of the HuC binary has been updated and does not
match the GuC anymore. The GSC will perform all the required checks on
the binary size, so we only need to check that the version matches.

Note that since we still haven't added any gsc-loaded FWs, the
loaded_via_gsc variable will always be kept to its initialization value
of zero.

v2: Add a note about loaded_via_gsc being zero (Alan)

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504204816.2082588-3-daniele.ceraolospurio@intel.com

drm/i915/huc: drop intel_huc_is_authenticated

The function name is confusing, because it doesn't check the actual auth
status in HW but the SW status. Given that there is only one user (the
huc_auth function itself), just get rid of it and use the FW status
checker directly.

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504204816.2082588-2-daniele.ceraolospurio@intel.com

drm/i915/guc: Support programming the EU priority in the GuC descriptor

In GuC submission mode the EU priority must be updated by the GuC rather
than the driver as the GuC owns the programming of the context descriptor.

Given that the GuC code uses the GuC priorities, we can't use a generic
function using i915 priorities for both execlists and GuC submission.
The existing function has therefore been pushed to the execlists
back-end while a new one has been added for GuC.

v2: correctly use the GuC prio.

Cc: John Harrison <john.c.harrison@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504234636.2119794-1-daniele.ceraolospurio@intel.com

drm/i915: Respect VBT seamless DRRS min refresh rate

Make sure our choice of downclock mode respects the VBT
seameless DRRS min refresh rate limit.

v2: s/vrefesh/vrefresh/ (Jani)

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504150440.13748-10-ville.syrjala@linux.intel.com

drm/i915/bios: Parse the seamless DRRS min refresh rate

Extract the seamless DRRS min refresh rate from the VBT.

v2: Do a version check

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504150440.13748-9-ville.syrjala@linux.intel.com

drm/i915/bios: Refactor panel_type code

Make the panel type code a bit more abstract along the
lines of the source of the panel type. For the moment
we have three classes: OpRegion, VBT, fallback.
Well introduce another one shortly.

We can now also print out all the different panel types,
and indicate which one we ultimately selected. Could help
with debugging.

v2: Add .get_panel_type() vfunc (Jani)

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504150440.13748-8-ville.syrjala@linux.intel.com

drm/i915/bios: Extract get_panel_type()

Pull the code to determine the panel type into its own set of
sane functions.

v2: rebase

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504150440.13748-7-ville.syrjala@linux.intel.com

drm/i915/bios: Assume panel_type==0 if the VBT has bogus data

Just assume panel_type==0 always if the VBT gives us bogus data.
We actually already do this everywhere else except in
parse_panel_options() since we just leave i915->vbt.panel_type
zeroed. This also seems to be what Windows does.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504150440.13748-6-ville.syrjala@linux.intel.com

drm/i915/bios: Document the mess around the LFP data tables

Document the fact that struct lvds_lfp_data_entry can't be used
directly and instead must be accessed via the data table pointers.

Also remove the bogus comment implying that there might be a
variable number of panel entries in the table. There are always
exactly 16.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504150440.13748-5-ville.syrjala@linux.intel.com

drm/i915/bios: Get access to the tail end of the LFP data block

We need to start parsing stuff from the tail end of the LFP data block.
This is made awkward by the fact that the fp_timing table has variable
size. So we must use a bit more finesse to get the tail end, and to
make sure we allocate enough memory for it to make sure our struct
representation fits.

v2: Rebase due to the preallocation of BDB blocks
v3: Rebase due to min_size WARN relocation
v4: Document BDB_LVDS_LFP_DATA vs. BDB_LVDS_LFP_DATA_PTRS order (Jani)

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504150440.13748-4-ville.syrjala@linux.intel.com

drm/i915/bios: Generate LFP data table pointers if the VBT lacks them

Modern VBTs no longer contain the LFP data table pointers
block (41). We are expecting to have one in order to be able
to parse the LFP data block (42), so let's make one up.

Since the fp_timing table has variable size we must somehow
determine its size. Rather than just hardcode it we look for
the terminator bytes (0xffff) to figure out where each table
entry starts. dvo_timing, panel_pnp_id, and panel_name are
expected to have fixed size.

This has been observed on various machines, eg. TGL with BDB
version 240, CML with BDB version 231, etc. The most recent
VBT I've observed that still had block 41 had BDB version
228. So presumably the cutoff (if an exact cutoff even exists)
is somewhere around BDB version 229-231.

v2: kfree the thing we allocated, not the thing+3 bytes
v3: Do the debugprint only if we found the LFP data block
v4: Fix t0 null check (Jani)

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504150440.13748-3-ville.syrjala@linux.intel.com

drm/i915/bios: Reorder panel DTD parsing

Reorder things so that we can parse the entier LFP data block
in one go. For now we just stick to parsing the DTD from it.

Also fix the misleading comment about block 42 being deprecated.
Only the DTD part is deprecated, the rest is still very much needed.

v2: Move the version check+comment into parse_generic_dtd() (Jani)

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504150440.13748-2-ville.syrjala@linux.intel.com

drm/i915: Use drm_mode_init() for on-stack modes

Initialize on-stack modes with drm_mode_init() to guarantee
no stack garbage in the list head, or that we aren't copying
over another mode's list head.

Based on the following cocci script, with manual fixups:
@decl@
identifier M;
expression E;
@@
- struct drm_display_mode M = E;
+ struct drm_display_mode M;

@@
identifier decl.M;
expression decl.E;
statement S, S1;
@@
struct drm_display_mode M;
... when != S
+ drm_mode_init(&M, &E);
+
S1

@@
expression decl.E;
@@
- &*E
+ E

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218100403.7028-19-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: warn about missing ->get_buf_trans initialization

Make sure each DDI platform has sane ->get_buf_trans initialized.

Suggested-by: Matt Roper <matthew.d.roper@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220503082134.4128355-1-jani.nikula@intel.com

drm/i915: Fix race in __i915_vma_remove_closed

i915_vma_reopen checked if the vma is closed before without taking the
lock. So multiple threads could attempt removing the vma.

Instead the lock needs to be taken before actually checking.

v2: move struct declaration

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.3+
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5732
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Fixes: 155ab8836caa ("drm/i915: Move object close under its own lock")
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220420095720.3331609-1-kherbst@redhat.com

drm/i915: use IOMEM_ERR_PTR() directly

Use IOMEM_ERR_PTR() instead of self defined IO_ERR_PTR().

Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220503144937.679424-1-tvrtko.ursulin@linux.intel.com

drm/i915/pvc: add initial Ponte Vecchio definitions

Additional blitter and media engines will be enabled later.

Bspec: 44481, 44482
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220502163417.2635462-2-matthew.d.roper@intel.com

drm/i915: Fix assert in i915_ggtt_pin

Use lockdep_assert_not_held to simplify and correct the code. Otherwise
false positive are hit if lock state is uknown like after a previous
taint.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220429140757.651406-1-tvrtko.ursulin@linux.intel.com

drm/i915: remove superfluous string helper include

Remove the duplicate and incorrect (uses "" instead of <>)
linux/string_helpers.h include.

Fixes: cc1338f259a2 ("drm/i915/xehp: Update topology dumps for Xe_HP")
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220425154754.990815-1-jani.nikula@intel.com

drm/i915/gt: Document the eviction of the Flat-CCS objects

Capture the eviction details for Flat-CCS capable, lmem objects.

v2:
  Fix the Flat-ccs capbility of lmem obj with smem residency
  possibility [Thomas]
v3:
  Fixed the suggestions [Matt]

Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
cc: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220502142618.2704-4-ramalingam.c@intel.com

drm/i915/gt: optimize the ccs_sz calculation per chunk

Calculate the ccs_sz that needs to be emitted based on the src
and dst pages emitted per chunk. And handle the return value of emit_pte
for the ccs pages.

v2:
  ccs_sz moved to the reduced scope [Matt]

Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220502142618.2704-3-ramalingam.c@intel.com

drm/i915/gt: Clear SET_PREDICATE_RESULT prior to executing the ring

Userspace may leave predication enabled upon return from the batch
buffer, which has the consequent of preventing all operation from the
ring from being executed, including all the synchronisation, coherency
control, arbitration and user signaling. This is more than just a local
gpu hang in one client, as the user has the ability to prevent the
kernel from applying critical workarounds and can cause a full GT reset.

We could simply execute MI_SET_PREDICATE upon return from the user
batch, but this has the repercussion of modifying the user's context
state. Instead, we opt to execute a fixup batch which by mixing
predicated operations can determine the state of the
SET_PREDICATE_RESULT register and restore it prior to the next userspace
batch. This allows us to protect the kernel's ring without changing the
uABI.

Suggested-by: Zbigniew Kempczynski <zbigniew.kempczynski@intel.com>
Signed-off-by: Chris Wilson <chris.p.wilson@intel.com>
Cc: Zbigniew Kempczynski <zbigniew.kempczynski@intel.com>
Cc: Thomas Hellstrom <thomas.hellstrom@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220425152317.4275-4-ramalingam.c@intel.com

drm/i915/selftests: Skip poisoning SET_PREDICATE_RESULT on dg2

When predication is enabled all commands baring a few (such as MI_BB_END)
are nop'ed. If we accidentally enable predication while poisoning the
context, not only is the rest of the poisoning skipped (thus disabling
the test), but the closing instructions of the poison request are
nop'ed. Not only do we then not signal the waiting context, but we even
prevent re-enabling arbitration and the GPU will not perform a context
switch at the end of the request.

Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Suggested-by: CQ Tang <cq.tang@intel.com>
Signed-off-by: Chris Wilson <chris.p.wilson@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220425152317.4275-3-ramalingam.c@intel.com

drm/i915/xehpsdv/dg1/tgl: Fix issue with LRI relative addressing

When bit 19 of MI_LOAD_REGISTER_IMM instruction opcode is set on tgl+
devices, HW does not care about certain register address offsets, but
instead check the following for valid address ranges on specific engines:
RCS && CCS: BITS(0 - 10)
BCS: BITS(0 - 11)
VECS && VCS: BITS(0 - 13)
Also, tgl+ now support relative addressing for BCS engine - So, this
patch fixes issue with live_gt_lrc selftest that is failing where there is
mismatch between LRC register layout generated during init and HW
default register offsets.

Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220425152317.4275-2-ramalingam.c@intel.com

drm/i915: move tons of power well initializers to rodata

Using compound literals for initialization can be tricky. Lacking a
const qualifier, they won't end up in rodata, which is probably not
expected or intended. Add const to move a whopping 136 initializers to
rodata.

Compare:

$ objdump --syms drivers/gpu/drm/i915/display/intel_display_power_map.o | grep "\.rodata.*__compound_literal"
$ objdump --syms drivers/gpu/drm/i915/display/intel_display_power_map.o | grep "\.data.*__compound_literal"

Before and after the change.

Fixes: c32ffce42aa5 ("drm/i915: Convert the power well descriptor domain mask to an array of domains")
Fixes: 4a845ff0c0d4 ("drm/i915: Simplify power well definitions by adding power well instances")
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220429142140.2671828-1-jani.nikula@intel.com

drm/i915: Xe_HP SDV and DG2 have up to 4 CCS engines

Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Jordan Justen <jordan.l.justen@intel.com> # mesa anvil & iris
Link: https://patchwork.freedesktop.org/patch/msgid/20220428041926.1483683-5-matthew.d.roper@intel.com

drm/i915/xehp: Add compute engine ABI

We're now ready to start exposing compute engines to userspace.

v2:
 - Move kerneldoc for other engine classes to a separate patch.  (Andi)

Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Szymon Morek <szymon.morek@intel.com>
UMD (mesa): https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14395
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Jordan Justen <jordan.l.justen@intel.com> # mesa anvil & iris
Link: https://patchwork.freedesktop.org/patch/msgid/20220428041926.1483683-4-matthew.d.roper@intel.com

drm/i915/xehp: Add register for compute engine's MMIO-based TLB invalidation

Compute engines have a separate register that the driver should use to
perform MMIO-based TLB invalidation.

Note that the term "context" in this register's bspec description is
used to refer to the engine instance (in the same way "context" is used
on bspec 46167).

Bspec: 43930
Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220428041926.1483683-3-matthew.d.roper@intel.com

drm/i915/uapi: Add kerneldoc for engine class enum

We'll be adding a new type of engine soon.  Let's document the existing
engine classes first to help make it clear what each type of engine is
used for.

Cc: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220428041926.1483683-2-matthew.d.roper@intel.com

Merge tag 'gvt-next-2022-04-29' of https://github.com/intel/gvt-linux into drm-intel-next

gvt-next-2022-04-29

Introduce fixes from previous pull.
- Fix a compiling warning of non-static funtion only having one caller.
- Fix a potential NULL pointer reference in the code re-factor.
- Fix a compiling error when CONFIG_DRM_I915_DEBUG_RUNTIME_PM=n

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
From: "Wang, Zhi A" <zhi.a.wang@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9c2fc678-2e6e-a9d5-a540-2a6bfda31196@intel.com

i915/gvt: Fix NULL pointer dereference in init_mmio_block_handlers

Fix following coccicheck error:
./drivers/gpu/drm/i915/gvt/handlers.c:2925:35-41: ERROR: block is NULL but dereferenced.

Use gvt->mmio.mmio_block instead of block to avoid NULL pointer
dereference when find_mmio_block returns NULL.

Fixes: e0f74ed4634d ("i915/gvt: Separate the MMIO tracking table from GVT-g")
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220427115457.836729-1-wanjiabing@vivo.com
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>