cpuidle, arch: Mark all ct_cpuidle_enter() callers __cpuidle

For all cpuidle drivers that use CPUIDLE_FLAG_RCU_IDLE, ensure that
all functions that call ct_cpuidle_enter() are marked __cpuidle.

( due to lack of noinstr validation on these platforms it is entirely
  possible this isn't complete )

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230112195542.274096325@infradead.org

cpuidle: Ensure ct_cpuidle_enter() is always called from noinstr/__cpuidle

Tracing (kprobes included) and other compiler instrumentation relies
on a normal kernel runtime. Therefore all functions that disable RCU
should be noinstr, as should all functions that are called while RCU
is disabled.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230112195542.212914195@infradead.org

arm64, riscv, perf: Remove RCU_NONIDLE() usage

The PM notifiers should no longer be ran with RCU disabled (per the
previous patches), as such this hack is no longer required either.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195542.151174682@infradead.org

sched/core: Always inline __this_cpu_preempt_check()

Quite a few unnecessary instrumentation calls are generated via the
no-op __this_cpu_preempt_check() call, if it gets uninlined by the
compiler:

  vmlinux.o: warning: objtool: in_entry_stack+0x9: call to __this_cpu_preempt_check() leaves .noinstr.text section
  vmlinux.o: warning: objtool: default_do_nmi+0x10: call to __this_cpu_preempt_check() leaves .noinstr.text section
  vmlinux.o: warning: objtool: fpu_idle_fpregs+0x41: call to __this_cpu_preempt_check() leaves .noinstr.text section
  vmlinux.o: warning: objtool: kvm_read_and_reset_apf_flags+0x1: call to __this_cpu_preempt_check() leaves .noinstr.text section
  vmlinux.o: warning: objtool: lockdep_hardirqs_on+0xb0: call to __this_cpu_preempt_check() leaves .noinstr.text section
  vmlinux.o: warning: objtool: lockdep_hardirqs_off+0xae: call to __this_cpu_preempt_check() leaves .noinstr.text section
  vmlinux.o: warning: objtool: irqentry_nmi_enter+0x69: call to __this_cpu_preempt_check() leaves .noinstr.text section
  vmlinux.o: warning: objtool: irqentry_nmi_exit+0x32: call to __this_cpu_preempt_check() leaves .noinstr.text section
  vmlinux.o: warning: objtool: acpi_processor_ffh_cstate_enter+0x9: call to __this_cpu_preempt_check() leaves .noinstr.text section
  vmlinux.o: warning: objtool: acpi_idle_enter+0x43: call to __this_cpu_preempt_check() leaves .noinstr.text section
  vmlinux.o: warning: objtool: acpi_idle_enter_s2idle+0x45: call to __this_cpu_preempt_check() leaves .noinstr.text section

Mark it __always_inline.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195542.089981974@infradead.org

entry, kasan, x86: Disallow overriding mem*() functions

KASAN cannot just hijack the mem*() functions, it needs to emit
__asan_mem*() variants if it wants instrumentation (other sanitizers
already do this).

  vmlinux.o: warning: objtool: sync_regs+0x24: call to memcpy() leaves .noinstr.text section
  vmlinux.o: warning: objtool: vc_switch_off_ist+0xbe: call to memcpy() leaves .noinstr.text section
  vmlinux.o: warning: objtool: fixup_bad_iret+0x36: call to memset() leaves .noinstr.text section
  vmlinux.o: warning: objtool: __sev_get_ghcb+0xa0: call to memcpy() leaves .noinstr.text section
  vmlinux.o: warning: objtool: __sev_put_ghcb+0x35: call to memcpy() leaves .noinstr.text section

Remove the weak aliases to ensure nobody hijacks these functions and
add them to the noinstr section.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195542.028523143@infradead.org

intel_idle: Add force_irq_on module param

For testing purposes.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195541.967699392@infradead.org

ubsan: Fix objtool UACCESS warns

clang-14 allyesconfig gives:

  vmlinux.o: warning: objtool: emulator_cmpxchg_emulated+0x705: call to __ubsan_handle_load_invalid_value() with UACCESS enabled
  vmlinux.o: warning: objtool: paging64_update_accessed_dirty_bits+0x39e: call to __ubsan_handle_load_invalid_value() with UACCESS enabled
  vmlinux.o: warning: objtool: paging32_update_accessed_dirty_bits+0x390: call to __ubsan_handle_load_invalid_value() with UACCESS enabled
  vmlinux.o: warning: objtool: ept_update_accessed_dirty_bits+0x43f: call to __ubsan_handle_load_invalid_value() with UACCESS enabled

Add the required eflags save/restore and whitelist the thing.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195541.906007455@infradead.org

cpuidle, clk: Remove trace_.*_rcuidle()

OMAP was the one and only user.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20230112195541.844982902@infradead.org

cpuidle, ARM: OMAP2+: powerdomain: Remove trace_.*_rcuidle()

OMAP was the one and only user.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195541.782536366@infradead.org

arm, OMAP2: Use WFI for omap2_pm_idle()

arch_cpu_idle() is a very simple idle interface and exposes only a
single idle state and is expected to not require RCU and not do any
tracing/instrumentation.

As such, omap2_pm_idle() is not a valid implementation. Replace it
with a simple (shallow) omap2_do_wfi() call.

Omap2 doesn't have a cpuidle driver; but adding one would be the
recourse to (re)gain the other idle states.

Suggested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195541.721697850@infradead.org

cpuidle, OMAP4: Push RCU-idle into omap4_enter_lowpower()

OMAP4 uses full SoC suspend modes as idle states, as such it needs the
whole power-domain and clock-domain code from the idle path.

All that code is not suitable to run with RCU disabled, as such push
RCU-idle deeper still.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lkml.kernel.org/r/Yqcv6crSNKuSWoTu@atomide.com
Link: https://lore.kernel.org/r/20230112195541.660272394@infradead.org

cpuidle, OMAP3: Push RCU-idle into omap_sram_idle()

OMAP3 uses full SoC suspend modes as idle states, as such it needs the
whole power-domain and clock-domain code from the idle path.

All that code is not suitable to run with RCU disabled, as such push
RCU-idle deeper still.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195541.599561742@infradead.org

cpuidle, OMAP3: Use WFI for omap3_pm_idle()

arch_cpu_idle() is a very simple idle interface and exposes only a
single idle state and is expected to not require RCU and not do any
tracing/instrumentation.

As such, omap_sram_idle() is not a valid implementation. Replace it
with the simple (shallow) omap3_do_wfi() call. Leaving the more
complicated idle states for the cpuidle driver.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195541.538053457@infradead.org

tracing, hardirq: No moar _rcuidle() tracing

Robot reported that trace_hardirqs_{on,off}() tickle the forbidden
_rcuidle() tracepoint through local_irq_{en,dis}able().

For 'sane' configs, these calls will only happen with RCU enabled and
as such can use the regular tracepoint. This also means it's possible
to trace them from NMI context again.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230112195541.477416709@infradead.org

tracing: WARN on rcuidle

ARCH_WANTS_NO_INSTR (a superset of CONFIG_GENERIC_ENTRY) disallows any
and all tracing when RCU isn't enabled.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195541.416110581@infradead.org

tracing: Remove trace_hardirqs_{on,off}_caller()

Per commit 56e62a737028 ("s390: convert to generic entry") the last
and only callers of trace_hardirqs_{on,off}_caller() went away, clean
up.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230112195541.355283994@infradead.org

cpuidle, ACPI: Make noinstr clean

objtool found cases where ACPI methods called out into instrumentation code:

  vmlinux.o: warning: objtool: io_idle+0xc: call to __inb.isra.0() leaves .noinstr.text section
  vmlinux.o: warning: objtool: acpi_idle_enter+0xfe: call to num_online_cpus() leaves .noinstr.text section
  vmlinux.o: warning: objtool: acpi_idle_enter+0x115: call to acpi_idle_fallback_to_c1.isra.0() leaves .noinstr.text section

Fix this by: marking the IO in/out, acpi_idle_fallback_to_c1() and
num_online_cpus() methods as __always_inline.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195541.294846301@infradead.org

cpuidle, nospec: Make mds_idle_clear_cpu_buffers() noinstr clean

objtool found that the mds_idle_clear_cpu_buffers() method got
uninlined by the compiler where it called out into instrumentation:

  vmlinux.o: warning: objtool: mwait_idle+0x47: call to mds_idle_clear_cpu_buffers() leaves .noinstr.text section
  vmlinux.o: warning: objtool: acpi_processor_ffh_cstate_enter+0xa2: call to mds_idle_clear_cpu_buffers() leaves .noinstr.text section
  vmlinux.o: warning: objtool: intel_idle+0x91: call to mds_idle_clear_cpu_buffers() leaves .noinstr.text section
  vmlinux.o: warning: objtool: intel_idle_s2idle+0x8c: call to mds_idle_clear_cpu_buffers() leaves .noinstr.text section
  vmlinux.o: warning: objtool: intel_idle_irq+0xaa: call to mds_idle_clear_cpu_buffers() leaves .noinstr.text section

Solve this by marking mds_idle_clear_cpu_buffers() as __always_inline.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195541.233779815@infradead.org

cpuidle, xenpv: Make more PARAVIRT_XXL noinstr clean

objtool found a few cases where this code called out into instrumented
code:

  vmlinux.o: warning: objtool: acpi_idle_enter_s2idle+0xde: call to wbinvd() leaves .noinstr.text section
  vmlinux.o: warning: objtool: default_idle+0x4: call to arch_safe_halt() leaves .noinstr.text section
  vmlinux.o: warning: objtool: xen_safe_halt+0xa: call to HYPERVISOR_sched_op.constprop.0() leaves .noinstr.text section

Solve this by:

 - marking arch_safe_halt(), wbinvd(), native_wbinvd() and
   HYPERVISOR_sched_op() as __always_inline().

 - Explicitly uninlining xen_safe_halt() and pv_native_wbinvd() [they were
   already uninlined by the compiler on use as function pointers] and
   annotating them as 'noinstr'.

 - Annotating pv_native_safe_halt() as 'noinstr'.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195541.171918174@infradead.org

cpuidle, tdx: Make TDX code noinstr clean

objtool found a few cases where this code called out into instrumented
code:

  vmlinux.o: warning: objtool: __halt+0x2c: call to hcall_func.constprop.0() leaves .noinstr.text section
  vmlinux.o: warning: objtool: __halt+0x3f: call to __tdx_hypercall() leaves .noinstr.text section
  vmlinux.o: warning: objtool: __tdx_hypercall+0x66: call to __tdx_hypercall_failed() leaves .noinstr.text section

Fix it by:

  - moving TDX tdcall assembly methods into .noinstr.text (they are already noistr-clean)
  - marking __tdx_hypercall_failed() as 'noinstr'
  - annotating hcall_func() as __always_inline

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195541.111485720@infradead.org

cpuidle, mwait: Make the mwait code noinstr clean

objtool found a few cases where this code called out into instrumented
code:

  vmlinux.o: warning: objtool: intel_idle_s2idle+0x6e: call to __monitor.constprop.0() leaves .noinstr.text section
  vmlinux.o: warning: objtool: intel_idle_irq+0x8c: call to __monitor.constprop.0() leaves .noinstr.text section
  vmlinux.o: warning: objtool: intel_idle+0x73: call to __monitor.constprop.0() leaves .noinstr.text section

  vmlinux.o: warning: objtool: mwait_idle+0x88: call to clflush() leaves .noinstr.text section

Fix it by marking the affected methods as __always_inline.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195541.050542952@infradead.org

cpuidle, sched: Remove instrumentation from TIF_{POLLING_NRFLAG,NEED_RESCHED}

objtool pointed out that various idle-TIF management methods
have instrumentation:

  vmlinux.o: warning: objtool: mwait_idle+0x5: call to current_set_polling_and_test() leaves .noinstr.text section
  vmlinux.o: warning: objtool: acpi_processor_ffh_cstate_enter+0xc5: call to current_set_polling_and_test() leaves .noinstr.text section
  vmlinux.o: warning: objtool: cpu_idle_poll.isra.0+0x73: call to test_ti_thread_flag() leaves .noinstr.text section
  vmlinux.o: warning: objtool: intel_idle+0xbc: call to current_set_polling_and_test() leaves .noinstr.text section
  vmlinux.o: warning: objtool: intel_idle_irq+0xea: call to current_set_polling_and_test() leaves .noinstr.text section
  vmlinux.o: warning: objtool: intel_idle_s2idle+0xb4: call to current_set_polling_and_test() leaves .noinstr.text section

  vmlinux.o: warning: objtool: intel_idle+0xa6: call to current_clr_polling() leaves .noinstr.text section
  vmlinux.o: warning: objtool: intel_idle_irq+0xbf: call to current_clr_polling() leaves .noinstr.text section
  vmlinux.o: warning: objtool: intel_idle_s2idle+0xa1: call to current_clr_polling() leaves .noinstr.text section

  vmlinux.o: warning: objtool: mwait_idle+0xe: call to __current_set_polling() leaves .noinstr.text section
  vmlinux.o: warning: objtool: acpi_processor_ffh_cstate_enter+0xc5: call to __current_set_polling() leaves .noinstr.text section
  vmlinux.o: warning: objtool: cpu_idle_poll.isra.0+0x73: call to test_ti_thread_flag() leaves .noinstr.text section
  vmlinux.o: warning: objtool: intel_idle+0xbc: call to __current_set_polling() leaves .noinstr.text section
  vmlinux.o: warning: objtool: intel_idle_irq+0xea: call to __current_set_polling() leaves .noinstr.text section
  vmlinux.o: warning: objtool: intel_idle_s2idle+0xb4: call to __current_set_polling() leaves .noinstr.text section

  vmlinux.o: warning: objtool: cpu_idle_poll.isra.0+0x73: call to test_ti_thread_flag() leaves .noinstr.text section
  vmlinux.o: warning: objtool: intel_idle_s2idle+0x73: call to test_ti_thread_flag.constprop.0() leaves .noinstr.text section
  vmlinux.o: warning: objtool: intel_idle_irq+0x91: call to test_ti_thread_flag.constprop.0() leaves .noinstr.text section
  vmlinux.o: warning: objtool: intel_idle+0x78: call to test_ti_thread_flag.constprop.0() leaves .noinstr.text section
  vmlinux.o: warning: objtool: acpi_safe_halt+0xf: call to test_ti_thread_flag.constprop.0() leaves .noinstr.text section

Remove the instrumentation, because these methods are used in low-level
cpuidle code moving between states, that should not be instrumented.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195540.988741683@infradead.org

time/tick-broadcast: Remove RCU_NONIDLE() usage

No callers left that have already disabled RCU.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195540.927904612@infradead.org

printk: Remove trace_.*_rcuidle() usage

The problem, per commit fc98c3c8c9dc ("printk: use rcuidle console
tracepoint"), was printk usage from the cpuidle path where RCU was
already disabled.

Per the patches earlier in this series, this is no longer the case.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Petr Mladek <pmladek@suse.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195540.865735001@infradead.org

arm64, smp: Remove trace_.*_rcuidle() usage

Ever since commit d3afc7f12987 ("arm64: Allow IPIs to be handled as
normal interrupts") this function is called in regular IRQ context.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195540.804410487@infradead.org

arm, smp: Remove trace_.*_rcuidle() usage

None of these functions should ever be ran with RCU disabled anymore.

Specifically, do_handle_IPI() is only called from handle_IPI() which
explicitly does irq_enter()/irq_exit() which ensures RCU is watching.

The problem with smp_cross_call() was, per commit description:

   7c64cc0531fa ("arm: Use _rcuidle for smp_cross_call() tracepoints")

... that cpuidle_enter_state_coupled() already had RCU disabled, but that's
long been fixed by commit:

  1098582a0f6c ("sched,idle,rcu: Push rcu_idle deeper into the idle path")

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195540.743432118@infradead.org

x86/tdx: Remove TDX_HCALL_ISSUE_STI

Now that arch_cpu_idle() is expected to return with IRQs disabled,
avoid the useless STI/CLI dance.

Per the specs this is supposed to work, but nobody has yet relied up
this behaviour so broken implementations are possible.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195540.682137572@infradead.org

arch/idle: Change arch_cpu_idle() behavior: always exit with IRQs disabled

Current arch_cpu_idle() is called with IRQs disabled, but will return
with IRQs enabled.

However, the very first thing the generic code does after calling
arch_cpu_idle() is raw_local_irq_disable(). This means that
architectures that can idle with IRQs disabled end up doing a
pointless 'enable-disable' dance.

Therefore, push this IRQ disabling into the idle function, meaning
that those architectures can avoid the pointless IRQ state flipping.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Acked-by: Mark Rutland <mark.rutland@arm.com> [arm64]
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Guo Ren <guoren@kernel.org>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195540.618076436@infradead.org

cpuidle, intel_idle: Fix CPUIDLE_FLAG_IBRS

objtool to the rescue:

  vmlinux.o: warning: objtool: intel_idle_ibrs+0x17: call to spec_ctrl_current() leaves .noinstr.text section
  vmlinux.o: warning: objtool: intel_idle_ibrs+0x27: call to wrmsrl.constprop.0() leaves .noinstr.text section

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195540.556912863@infradead.org

cpuidle, intel_idle: Fix CPUIDLE_FLAG_INIT_XSTATE

Fix instrumentation bugs objtool found:

  vmlinux.o: warning: objtool: intel_idle_s2idle+0xd5: call to fpu_idle_fpregs() leaves .noinstr.text section
  vmlinux.o: warning: objtool: intel_idle_xstate+0x11: call to fpu_idle_fpregs() leaves .noinstr.text section
  vmlinux.o: warning: objtool: fpu_idle_fpregs+0x9: call to xfeatures_in_use() leaves .noinstr.text section

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195540.494977795@infradead.org

cpuidle, intel_idle: Fix CPUIDLE_FLAG_IRQ_ENABLE *again*

So objtool found this bug:

  vmlinux.o: warning: objtool: intel_idle_irq+0x10c: call to trace_hardirqs_off() leaves .noinstr.text section

As per commit 32d4fd5751ea ("cpuidle,intel_idle: Fix CPUIDLE_FLAG_IRQ_ENABLE"):

  "must not have tracing in idle functions"

Clearly people can't read and tinker along until splat dissapears.
This straight up reverts commit d295ad34f236 ("intel_idle: Fix false
positive RCU splats due to incorrect hardirqs state").

It doesn't re-introduce the problem because preceding patches fixed it
properly.

Fixes: d295ad34f236 ("intel_idle: Fix false positive RCU splats due to incorrect hardirqs state")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195540.434302128@infradead.org

objtool/idle: Validate __cpuidle code as noinstr

Idle code is very like entry code in that RCU isn't available. As
such, add a little validation.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195540.373461409@infradead.org

cpuidle: Annotate poll_idle()

The __cpuidle functions will become a noinstr class, as such they need
explicit annotations.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195540.312601331@infradead.org

acpi_idle: Remove tracing

All the idle routines are called with RCU disabled, as such there must
not be any tracing inside.

While there; clean-up the io-port idle thing.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195540.251666856@infradead.org

cpuidle, cpu_pm: Remove RCU fiddling from cpu_pm_{enter,exit}()

All callers should still have RCU enabled.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195540.190860672@infradead.org

cpuidle: Fix ct_idle_*() usage

The whole disable-RCU, enable-IRQS dance is very intricate since
changing IRQ state is traced, which depends on RCU.

Add two helpers for the cpuidle case that mirror the entry code:

  ct_cpuidle_enter()
  ct_cpuidle_exit()

And fix all the cases where the enter/exit dance was buggy.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195540.130014793@infradead.org

cpuidle, dt: Push RCU-idle into driver

Doing RCU-idle outside the driver, only to then temporarily enable it
again before going idle is suboptimal.

Notably: this converts all dt_init_idle_driver() and
__CPU_PM_CPU_IDLE_ENTER() users for they are inextrably intertwined.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195540.068981667@infradead.org

cpuidle, OMAP4: Push RCU-idle into driver

Doing RCU-idle outside the driver, only to then temporarily enable it
again, some *four* times, before going idle is suboptimal.

Notably three times explicitly using RCU_NONIDLE() and once implicitly
through cpu_pm_*().

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20230112195540.007918454@infradead.org

cpuidle, armada: Push RCU-idle into driver

Doing RCU-idle outside the driver, only to then temporarily enable it
again before going idle is suboptimal.

Notably the cpu_pm_*() calls implicitly re-enable RCU for a bit.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20230112195539.946630819@infradead.org

cpuidle, OMAP3: Push RCU-idle into driver

Doing RCU-idle outside the driver, only to then teporarily enable it
again before going idle is suboptimal.

Notably the cpu_pm_*() calls implicitly re-enable RCU for a bit.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20230112195539.883561913@infradead.org

cpuidle, ARM/imx6: Push RCU-idle into driver

Doing RCU-idle outside the driver, only to then temporarily enable it
again, at least twice, before going idle is suboptimal.

Notably both cpu_pm_enter() and cpu_cluster_pm_enter() implicity
re-enable RCU.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20230112195539.821714572@infradead.org

cpuidle, psci: Push RCU-idle into driver

Doing RCU-idle outside the driver, only to then temporarily enable it
again, at least twice, before going idle is suboptimal.

Notably once implicitly through the cpu_pm_*() calls and once
explicitly doing ct_irq_*_irqon().

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Kajetan Puchalski <kajetan.puchalski@arm.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Guo Ren <guoren@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20230112195539.760296658@infradead.org

cpuidle, tegra: Push RCU-idle into driver

Doing RCU-idle outside the driver, only to then temporarily enable it
again, at least twice, before going idle is suboptimal.

Notably once implicitly through the cpu_pm_*() calls and once
explicitly doing RCU_NONIDLE().

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20230112195539.699546331@infradead.org

cpuidle, riscv: Push RCU-idle into driver

Doing RCU-idle outside the driver, only to then temporarily enable it
again, at least twice, before going idle is suboptimal.

That is, once implicitly through the cpu_pm_*() calls and once
explicitly doing ct_irq_*_irqon().

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20230112195539.637185846@infradead.org

cpuidle: Move IRQ state validation

Make cpuidle_enter_state() consistent with the s2idle variant and
verify ->enter() always returns with interrupts disabled.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195539.576412812@infradead.org

cpuidle/poll: Ensure IRQs stay disabled after cpuidle_state::enter() calls

Make cpuidle_state::enter() methods IRQ state invariant on exit.

Additionally make sure to use raw_local_irq_*() methods since this
cpuidle callback will be called with RCU already disabled.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195539.515253662@infradead.org

x86/idle: Replace 'x86_idle' function pointer with a static_call

Typical boot time setup; no need to suffer an indirect call for that.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20230112195539.453613251@infradead.org

x86/perf/amd: Remove tracing from perf_lopwr_cb()

The perf_lopwr_cb() function is called from the idle routines; there
is no RCU there, we must not enter tracing.

Use __always_inline, noidle annotations and existing no-trace methods.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195539.392862891@infradead.org

rseq: Increase AT_VECTOR_SIZE_BASE to match rseq auxvec entries

Two new auxiliary vector entries are introduced for rseq without
matching increment of the AT_VECTOR_SIZE_BASE, which causes failures
with CONFIG_HARDENED_USERCOPY=y.

Fixes: 317c8194e6ae ("rseq: Introduce feature size and alignment ELF auxiliary vector entries")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230104192054.34046-1-mathieu.desnoyers@efficios.com

selftests/rseq: Revert "selftests/rseq: Add mm_numa_cid to test script"

The mm_numa_cid related rseq patches from the series were not picked up
into the tip tree, so enabling the mm_numa_cid test needs to be
reverted.

This reverts commit b344b8f2d88dbf095caf97ac57fd3645843fa70f.

Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/oe-lkp/202301040903.2dd1e25b-oliver.sang@intel.com

sched/cputime: Fix IA64 build error of missing arch_vtime_task_switch() prototype

The following commit:

  c89970202a11 ("cputime: remove cputime_to_nsecs fallback")

Removed an <asm/cputime.h> inclusion from <linux/sched/cputime.h>, but this
broke the IA64 build:

    arch/ia64/kernel/time.c:110:6: warning: no previous prototype for 'arch_vtime_task_switch' [-Wmissing-prototypes]

Add in the missing <asm/cputime.h> header to fix it.

Fixes: c89970202a11 ("cputime: remove cputime_to_nsecs fallback")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: linux-kernel@vger.kernel.org
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

selftests/membarrier: Test MEMBARRIER_CMD_GET_REGISTRATIONS

Keep track of previously issued registrations and compare the result
with MEMBARRIER_CMD_GET_REGISTRATIONS return value.

Signed-off-by: Michal Clapinski <mclapinski@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20221207164338.1535591-3-mclapinski@google.com

sched/membarrier: Introduce MEMBARRIER_CMD_GET_REGISTRATIONS

Provide a method to query previously issued registrations.

Signed-off-by: Michal Clapinski <mclapinski@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20221207164338.1535591-2-mclapinski@google.com

cpufreq, sched/util: Optimize operations with single CPU capacity lookup

The max CPU capacity is the same for all CPUs sharing frequency domain.
There is a way to avoid heavy operations in a loop for each CPU by
leveraging this knowledge. Thus, simplify the looping code in the
sugov_next_freq_shared() and drop heavy multiplications. Instead, use
simple max() to get the highest utilization from these CPUs.

This is useful for platforms with many (4 or 6) little CPUs. We avoid
heavy 2*PD_CPU_NUM multiplications in that loop, which is called billions
of times, since it's not limited by the schedutil time delta filter in
sugov_should_update_freq(). When there was no need to change frequency
the code bailed out, not updating the sg_policy::last_freq_update_time.
Then every visit after delta_ns time longer than the
sg_policy::freq_update_delay_ns goes through and triggers the next
frequency calculation code. Although, if the next frequency, as outcome
of that, would be the same as current frequency, we won't update the
sg_policy::last_freq_update_time and the story will be repeated (in
a very short period, sometimes a few microseconds).

The max CPU capacity must be fetched every time we are called, due to
difficulties during the policy setup, where we are not able to get the
normalized CPU capacity at the right time.

The fetched CPU capacity value is than used in sugov_iowait_apply() to
calculate the right boost. This required a few changes in the local
functions and arguments. The capacity value should hopefully be fetched
once when needed and then passed over CPU registers to those functions.

Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20221208160256.859-2-lukasz.luba@arm.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Patrick Bellasi <patrick.bellasi@arm.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>

sched/core: Reorganize ttwu_do_wakeup() and ttwu_do_activate()

ttwu_do_activate() is used for a complete wakeup, in which we will
activate_task() and use ttwu_do_wakeup() to mark the task runnable
and perform wakeup-preemption, also call class->task_woken() callback
and update the rq->idle_stamp.

Since ttwu_runnable() is not a complete wakeup, don't need all those
done in ttwu_do_wakeup(), so we can move those to ttwu_do_activate()
to simplify ttwu_do_wakeup(), making it only mark the task runnable
to be reused in ttwu_runnable() and try_to_wake_up().

This patch should not have any functional changes.

Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20221223103257.4962-2-zhouchengming@bytedance.com

sched/core: Micro-optimize ttwu_runnable()

ttwu_runnable() is used as a fast wakeup path when the wakee task
is running on CPU or runnable on RQ, in both cases we can just
set its state to TASK_RUNNING to prevent a sleep.

If the wakee task is on_cpu running, we don't need to update_rq_clock()
or check_preempt_curr().

But if the wakee task is on_rq && !on_cpu (e.g. an IRQ hit before
the task got to schedule() and the task been preempted), we should
check_preempt_curr() to see if it can preempt the current running.

This also removes the class->task_woken() callback from ttwu_runnable(),
which wasn't required per the RT/DL implementations: any required push
operation would have been queued during class->set_next_task() when p
got preempted.

ttwu_runnable() also loses the update to rq->idle_stamp, as by definition
the rq cannot be idle in this scenario.

Suggested-by: Valentin Schneider <vschneid@redhat.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20221223103257.4962-1-zhouchengming@bytedance.com

sched/documentation: Document the util clamp feature

Add a document explaining the util clamp feature: what it is and
how to use it. The new document hopefully covers everything one needs to
know about uclamp.

Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lore.kernel.org/r/20221216235716.201923-1-qyousef@layalina.io
Cc: Jonathan Corbet <corbet@lwn.net>

sched/topology: Add __init for sched_init_domains()

sched_init_domains() is only used in initialization

Signed-off-by: Bing Huang <huangbing@kylinos.cn>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230105014943.9857-1-huangbing775@126.com

sched/rseq: Fix concurrency ID handling of usermodehelper kthreads

sched_mm_cid_after_execve() does not expect NULL t->mm, but it may happen
if a usermodehelper kthread fails when attempting to execute a binary.

sched_mm_cid_fork() can be issued from a usermodehelper kthread, which
has t->flags PF_KTHREAD set.

Fixes: af7f588d8f73 ("sched: Introduce per-memory-map concurrency ID")
Reported-by: kernel test robot <yujie.liu@intel.com>
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/oe-lkp/202212301353.5c959d72-yujie.liu@intel.com

cputime: remove cputime_to_nsecs fallback

The archs that use cputime_to_nsecs() internally provide their own
definition and don't need the fallback. cputime_to_usecs() unused except
in this fallback, and is not defined anywhere.

This removes the final remnant of the cputime_t code from the kernel.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/r/20221220070705.2958959-1-npiggin@gmail.com

sched/core: Adjusting the order of scanning CPU

When select_idle_capacity() starts scanning for an idle CPU, it starts
with target CPU that has already been checked in select_idle_sibling().
So we start checking from the next CPU and try the target CPU at the end.
Similarly for task_numa_assign(), we have just checked numa_migrate_on
of dst_cpu, so start from the next CPU. This also works for
steal_cookie_task(), the first scan must fail and start directly
from the next one.

Signed-off-by: Hao Jia <jiahao.os@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Link: https://lore.kernel.org/r/20221216062406.7812-3-jiahao.os@bytedance.com

sched/numa: Stop an exhastive search if an idle core is found

In update_numa_stats() we try to find an idle cpu on the NUMA node,
preferably an idle core. we can stop looking for the next idle core
or idle cpu after finding an idle core. But we can't stop the
whole loop of scanning the CPU, because we need to calculate
approximate NUMA stats at a point in time. For example,
the src and dst nr_running is needed by task_numa_find_cpu().

Signed-off-by: Hao Jia <jiahao.os@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Link: https://lore.kernel.org/r/20221216062406.7812-2-jiahao.os@bytedance.com

sched: Make const-safe

With a modified container_of() that preserves constness, the compiler
finds some pointers which should have been marked as const.  task_of()
also needs to become const-preserving for the !FAIR_GROUP_SCHED case so
that cfs_rq_of() can take a const argument.  No change to generated code.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20221212144946.2657785-1-willy@infradead.org

selftests/rseq: Add mm_numa_cid to test script

Add mm_numa_cid tests to the run_param_test.sh test script.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20221216145332.205095-1-mathieu.desnoyers@efficios.com

tracing/rseq: Add mm_cid field to rseq_update

Add the mm_cid field to the rseq_update event, allowing tracers to
follow which mm_cid is observed by user-space, and whether negative
mm_cid values are visible in case of internal scheduler implementation
issues.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221122203932.231377-22-mathieu.desnoyers@efficios.com

selftests/rseq: parametrized test: Report/abort on negative concurrency ID

Report and abort when a negative concurrency ID value is observed by the
spinlock test.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221122203932.231377-21-mathieu.desnoyers@efficios.com

selftests/rseq: Implement parametrized mm_cid test

Adapt to the rseq.h API changes introduced by commits
"selftests/rseq: <arch>: Template memory ordering and percpu access mode".

Build a new param_test_mm_cid, param_test_mm_cid_benchmark, and
param_test_mm_cid_compare_twice executables to test the new "mm_cid"
rseq field.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221122203932.231377-20-mathieu.desnoyers@efficios.com

selftests/rseq: Implement basic percpu ops mm_cid test

Adapt to the rseq.h API changes introduced by commits
"selftests/rseq: <arch>: Template memory ordering and percpu access mode".

Build a new basic_percpu_ops_mm_cid_test to test the new "mm_cid" rseq
field.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221122203932.231377-19-mathieu.desnoyers@efficios.com

selftests/rseq: riscv: Template memory ordering and percpu access mode

Introduce a rseq-riscv-bits.h template header which is internally included
to generate the static inline functions covering:

- relaxed and release memory ordering,
- per-cpu-id and per-mm-cid per-cpu data access.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221122203932.231377-18-mathieu.desnoyers@efficios.com

selftests/rseq: s390: Template memory ordering and percpu access mode

Introduce a rseq-s390-bits.h template header which is internally included
to generate the static inline functions covering:

- relaxed and release memory ordering,
- per-cpu-id and per-mm-cid per-cpu data access.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221122203932.231377-17-mathieu.desnoyers@efficios.com

selftests/rseq: ppc: Template memory ordering and percpu access mode

Introduce a rseq-ppc-bits.h template header which is internally included
to generate the static inline functions covering:

- relaxed and release memory ordering,
- per-cpu-id and per-mm-cid per-cpu data access.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221122203932.231377-16-mathieu.desnoyers@efficios.com

selftests/rseq: mips: Template memory ordering and percpu access mode

Introduce a rseq-mips-bits.h template header which is internally
included to generate the static inline functions covering:

- relaxed and release memory ordering,
- per-cpu-id and per-mm-cid per-cpu data access.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221122203932.231377-15-mathieu.desnoyers@efficios.com

selftests/rseq: arm64: Template memory ordering and percpu access mode

Introduce a rseq-arm64-bits.h template header which is internally
included to generate the static inline functions covering:

- relaxed and release memory ordering,
- per-cpu-id and per-mm-cid per-cpu data access.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221122203932.231377-14-mathieu.desnoyers@efficios.com

selftests/rseq: arm: Template memory ordering and percpu access mode

Introduce a rseq-arm-bits.h template header which is internally included
to generate the static inline functions covering:

- relaxed and release memory ordering,
- per-cpu-id and per-mm-cid per-cpu data access.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221122203932.231377-13-mathieu.desnoyers@efficios.com

selftests/rseq: x86: Template memory ordering and percpu access mode

Introduce a rseq-x86-bits.h template header which is internally included
to generate the static inline functions covering:

- relaxed and release memory ordering,
- per-cpu-id and per-mm-cid per-cpu data access.

This introduces changes to the rseq.h selftests API which require to
update the rseq selftest programs. Similar API/templating changes need
to be done for other architectures.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221122203932.231377-12-mathieu.desnoyers@efficios.com

selftests/rseq: Implement rseq mm_cid field support

Add support for the mm_cid field (per-memory-map concurrency ID) of
struct rseq to rseq selftests.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221122203932.231377-11-mathieu.desnoyers@efficios.com

selftests/rseq: Remove RSEQ_SKIP_FASTPATH code

This code is not currently build by the test Makefile, adds complexity,
and is not overall useful considering that the abort handling loops to
retry the fast-path.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221122203932.231377-10-mathieu.desnoyers@efficios.com

rseq: Extend struct rseq with per-memory-map concurrency ID

If a memory map has fewer threads than there are cores on the system, or
is limited to run on few cores concurrently through sched affinity or
cgroup cpusets, the concurrency IDs will be values close to 0, thus
allowing efficient use of user-space memory for per-cpu data structures.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221122203932.231377-9-mathieu.desnoyers@efficios.com

sched: Introduce per-memory-map concurrency ID

This feature allows the scheduler to expose a per-memory map concurrency
ID to user-space. This concurrency ID is within the possible cpus range,
and is temporarily (and uniquely) assigned while threads are actively
running within a memory map. If a memory map has fewer threads than
cores, or is limited to run on few cores concurrently through sched
affinity or cgroup cpusets, the concurrency IDs will be values close
to 0, thus allowing efficient use of user-space memory for per-cpu
data structures.

This feature is meant to be exposed by a new rseq thread area field.

The primary purpose of this feature is to do the heavy-lifting needed
by memory allocators to allow them to use per-cpu data structures
efficiently in the following situations:

- Single-threaded applications,
- Multi-threaded applications on large systems (many cores) with limited
  cpu affinity mask,
- Multi-threaded applications on large systems (many cores) with
  restricted cgroup cpuset per container.

One of the key concern from scheduler maintainers is the overhead
associated with additional spin locks or atomic operations in the
scheduler fast-path. This is why the following optimization is
implemented.

On context switch between threads belonging to the same memory map,
transfer the mm_cid from prev to next without any atomic ops. This
takes care of use-cases involving frequent context switch between
threads belonging to the same memory map.

Additional optimizations can be done if the spin locks added when
context switching between threads belonging to different memory maps end
up being a performance bottleneck. Those are left out of this patch
though. A performance impact would have to be clearly demonstrated to
justify the added complexity.

The credit goes to Paul Turner (Google) for the original virtual cpu id
idea. This feature is implemented based on the discussions with Paul
Turner and Peter Oskolkov (Google), but I took the liberty to implement
scheduler fast-path optimizations and my own NUMA-awareness scheme. The
rumor has it that Google have been running a rseq vcpu_id extension
internally in production for a year. The tcmalloc source code indeed has
comments hinting at a vcpu_id prototype extension to the rseq system
call [1].

The following benchmarks do not show any significant overhead added to
the scheduler context switch by this feature:

* perf bench sched messaging (process)

Baseline:                    86.5±0.3 ms
With mm_cid:                 86.7±2.6 ms

* perf bench sched messaging (threaded)

Baseline:                    84.3±3.0 ms
With mm_cid:                 84.7±2.6 ms

* hackbench (process)

Baseline:                    82.9±2.7 ms
With mm_cid:                 82.9±2.9 ms

* hackbench (threaded)

Baseline:                    85.2±2.6 ms
With mm_cid:                 84.4±2.9 ms

[1] https://github.com/google/tcmalloc/blob/master/tcmalloc/internal/linux_syscall_support.h#L26

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221122203932.231377-8-mathieu.desnoyers@efficios.com

selftests/rseq: Implement rseq numa node id field selftest

Test the NUMA node id extension rseq field. Compare it against the value
returned by the getcpu(2) system call while pinned on a specific core.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221122203932.231377-7-mathieu.desnoyers@efficios.com

selftests/rseq: Use ELF auxiliary vector for extensible rseq

Use the ELF auxiliary vector AT_RSEQ_FEATURE_SIZE to detect the RSEQ
features supported by the kernel.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221122203932.231377-6-mathieu.desnoyers@efficios.com

rseq: Extend struct rseq with numa node id

Adding the NUMA node id to struct rseq is a straightforward thing to do,
and a good way to figure out if anything in the user-space ecosystem
prevents extending struct rseq.

This NUMA node id field allows memory allocators such as tcmalloc to
take advantage of fast access to the current NUMA node id to perform
NUMA-aware memory allocation.

It can also be useful for implementing fast-paths for NUMA-aware
user-space mutexes.

It also allows implementing getcpu(2) purely in user-space.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221122203932.231377-5-mathieu.desnoyers@efficios.com

rseq: Introduce extensible rseq ABI

Introduce the extensible rseq ABI, where the feature size supported by
the kernel and the required alignment are communicated to user-space
through ELF auxiliary vectors.

This allows user-space to call rseq registration with a rseq_len of
either 32 bytes for the original struct rseq size (which includes
padding), or larger.

If rseq_len is larger than 32 bytes, then it must be large enough to
contain the feature size communicated to user-space through ELF
auxiliary vectors.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221122203932.231377-4-mathieu.desnoyers@efficios.com

rseq: Introduce feature size and alignment ELF auxiliary vector entries

Export the rseq feature size supported by the kernel as well as the
required allocation alignment for the rseq per-thread area to user-space
through ELF auxiliary vector entries.

This is part of the extensible rseq ABI.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221122203932.231377-3-mathieu.desnoyers@efficios.com

selftests/rseq: Fix: Fail thread registration when CONFIG_RSEQ=n

When linking the selftests against a libc which does not handle rseq
registration (before 2.35),  rseq thread registration silently succeed
even with CONFIG_RSEQ=n because it erroneously thinks that libc is
handling rseq registration.

This is caused by setting the rseq ownership flag only after the
rseq_available() check. It should rather be set before the
rseq_available() check.

Set the rseq_size to 0 (error value) immediately after the
rseq_available() check fails rather than in the thread registration
functions.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221122203932.231377-2-mathieu.desnoyers@efficios.com

sched: Async unthrottling for cfs bandwidth

CFS bandwidth currently distributes new runtime and unthrottles cfs_rq's
inline in an hrtimer callback. Runtime distribution is a per-cpu
operation, and unthrottling is a per-cgroup operation, since a tg walk
is required. On machines with a large number of cpus and large cgroup
hierarchies, this cpus*cgroups work can be too much to do in a single
hrtimer callback: since IRQ are disabled, hard lockups may easily occur.
Specifically, we've found this scalability issue on configurations with
256 cpus, O(1000) cgroups in the hierarchy being throttled, and high
memory bandwidth usage.

To fix this, we can instead unthrottle cfs_rq's asynchronously via a
CSD. Each cpu is responsible for unthrottling itself, thus sharding the
total work more fairly across the system, and avoiding hard lockups.

Signed-off-by: Josh Don <joshdon@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20221117005418.3499691-1-joshdon@google.com

sched/topology: Add __init for init_defrootdomain

init_defrootdomain is only used in initialization

Signed-off-by: Bing Huang <huangbing@kylinos.cn>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Link: https://lkml.kernel.org/r/20221118034208.267330-1-huangbing775@126.com

Linux 6.2-rc1

treewide: Convert del_timer*() to timer_shutdown*()

Due to several bugs caused by timers being re-armed after they are
shutdown and just before they are freed, a new state of timers was added
called "shutdown".  After a timer is set to this state, then it can no
longer be re-armed.

The following script was run to find all the trivial locations where
del_timer() or del_timer_sync() is called in the same function that the
object holding the timer is freed.  It also ignores any locations where
the timer->function is modified between the del_timer*() and the free(),
as that is not considered a "trivial" case.

This was created by using a coccinelle script and the following
commands:

    $ cat timer.cocci
    @@
    expression ptr, slab;
    identifier timer, rfield;
    @@
    (
    -       del_timer(&ptr->timer);
    +       timer_shutdown(&ptr->timer);
    |
    -       del_timer_sync(&ptr->timer);
    +       timer_shutdown_sync(&ptr->timer);
    )
      ... when strict
          when != ptr->timer
    (
            kfree_rcu(ptr, rfield);
    |
            kmem_cache_free(slab, ptr);
    |
            kfree(ptr);
    )

    $ spatch timer.cocci . > /tmp/t.patch
    $ patch -p1 < /tmp/t.patch

Link: https://lore.kernel.org/lkml/20221123201306.823305113@linutronix.de/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Pavel Machek <pavel@ucw.cz> [ LED ]
Acked-by: Kalle Valo <kvalo@kernel.org> [ wireless ]
Acked-by: Paolo Abeni <pabeni@redhat.com> [ networking ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'spi-fix-v6.2-rc1' of git://git./linux/kernel/git/broonie/spi

Pull spi fix from Mark Brown:
 "One driver specific change here which handles the case where a SPI
  device for some reason tries to change the bus speed during a message
  on fsl_spi hardware, this should be very unusual"

* tag 'spi-fix-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: fsl_spi: Don't change speed while chipselect is active

Merge tag 'regulator-fix-v6.2-rc1' of git://git./linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "Two core fixes here, one for a long standing race which some Qualcomm
  systems have started triggering with their UFS driver and another
  fixing a problem with supply lookup introduced by the fixes for devm
  related use after free issues that were introduced in this merge
  window"

* tag 'regulator-fix-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: core: fix deadlock on regulator enable
  regulator: core: Fix resolve supply lookup issue

Merge tag 'coccinelle-6.2' of git://git./linux/kernel/git/jlawall/linux

Pull coccicheck update from Julia Lawall:
 "Modernize use of grep in coccicheck:

  Use 'grep -E' instead of 'egrep'"

* tag 'coccinelle-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
  scripts: coccicheck: use "grep -E" instead of "egrep"

Merge tag 'hardening-v6.2-rc1-fixes' of git://git./linux/kernel/git/kees/linux

Pull kernel hardening fixes from Kees Cook:

 - Fix CFI failure with KASAN (Sami Tolvanen)

 - Fix LKDTM + CFI under GCC 7 and 8 (Kristina Martsenko)

 - Limit CONFIG_ZERO_CALL_USED_REGS to Clang > 15.0.6 (Nathan
   Chancellor)

 - Ignore "contents" argument in LoadPin's LSM hook handling

 - Fix paste-o in /sys/kernel/warn_count API docs

 - Use READ_ONCE() consistently for oops/warn limit reading

* tag 'hardening-v6.2-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  cfi: Fix CFI failure with KASAN
  exit: Use READ_ONCE() for all oops/warn limit reads
  security: Restrict CONFIG_ZERO_CALL_USED_REGS to gcc or clang > 15.0.6
  lkdtm: cfi: Make PAC test work with GCC 7 and 8
  docs: Fix path paste-o for /sys/kernel/warn_count
  LoadPin: Ignore the "contents" argument of the LSM hooks

Merge tag 'pstore-v6.2-rc1-fixes' of git://git./linux/kernel/git/kees/linux

Pull pstore fixes from Kees Cook:

 - Switch pmsg_lock to an rt_mutex to avoid priority inversion (John
   Stultz)

 - Correctly assign mem_type property (Luca Stefani)

* tag 'pstore-v6.2-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  pstore: Properly assign mem_type property
  pstore: Make sure CONFIG_PSTORE_PMSG selects CONFIG_RT_MUTEXES
  pstore: Switch pmsg_lock to an rt_mutex to avoid priority inversion

Merge tag 'dma-mapping-2022-12-23' of git://git.infradead.org/users/hch/dma-mapping

Pull dma-mapping fixes from Christoph Hellwig:
 "Fix up the sound code to not pass __GFP_COMP to the non-coherent DMA
  allocator, as it copes with that just as badly as the coherent
  allocator, and then add a check to make sure no one passes the flag
  ever again"

* tag 'dma-mapping-2022-12-23' of git://git.infradead.org/users/hch/dma-mapping:
  dma-mapping: reject GFP_COMP for noncoherent allocations
  ALSA: memalloc: don't use GFP_COMP for non-coherent dma allocations

Merge tag '9p-for-6.2-rc1' of https://github.com/martinetd/linux

Pull 9p updates from Dominique Martinet:

 - improve p9_check_errors to check buffer size instead of msize when
   possible (e.g. not zero-copy)

 - some more syzbot and KCSAN fixes

 - minor headers include cleanup

* tag '9p-for-6.2-rc1' of https://github.com/martinetd/linux:
  9p/client: fix data race on req->status
  net/9p: fix response size check in p9_check_errors()
  net/9p: distinguish zero-copy requests
  9p/xen: do not memcpy header into req->rc
  9p: set req refcount to zero to avoid uninitialized usage
  9p/net: Remove unneeded idr.h #include
  9p/fs: Remove unneeded idr.h #include

Merge tag 'sound-6.2-rc1-2' of git://git./linux/kernel/git/tiwai/sound

Pull more sound updates from Takashi Iwai:
 "A few more updates for 6.2: most of changes are about ASoC
  device-specific fixes.

   - Lots of ASoC Intel AVS extensions and refactoring

   - Quirks for ASoC Intel SOF as well as regression fixes

   - ASoC Mediatek and Rockchip fixes

   - Intel HD-audio HDMI workarounds

   - Usual HD- and USB-audio device-specific quirks"

* tag 'sound-6.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (54 commits)
  ALSA: usb-audio: Add new quirk FIXED_RATE for JBL Quantum810 Wireless
  ALSA: azt3328: Remove the unused function snd_azf3328_codec_outl()
  ASoC: lochnagar: Fix unused lochnagar_of_match warning
  ASoC: Intel: Add HP Stream 8 to bytcr_rt5640.c
  ASoC: SOF: mediatek: initialize panic_info to zero
  ASoC: rt5670: Remove unbalanced pm_runtime_put()
  ASoC: Intel: bytcr_rt5640: Add quirk for the Advantech MICA-071 tablet
  ASoC: Intel: soc-acpi: update codec addr on 0C11/0C4F product
  ASoC: rockchip: spdif: Add missing clk_disable_unprepare() in rk_spdif_runtime_resume()
  ASoC: wm8994: Fix potential deadlock
  ASoC: mediatek: mt8195: add sof be ops to check audio active
  ASoC: SOF: Revert: "core: unregister clients and machine drivers in .shutdown"
  ASoC: SOF: Intel: pci-tgl: unblock S5 entry if DMA stop has failed"
  ALSA: hda/hdmi: fix stream-id config keep-alive for rt suspend
  ALSA: hda/hdmi: set default audio parameters for KAE silent-stream
  ALSA: hda/hdmi: fix i915 silent stream programming flow
  ALSA: hda: Error out if invalid stream is being setup
  ASoC: dt-bindings: fsl-sai: Reinstate i.MX93 SAI compatible string
  ASoC: soc-pcm.c: Clear DAIs parameters after stream_active is updated
  ASoC: codecs: wcd-clsh: Remove the unused function
  ...

Merge tag 'drm-next-2022-12-23' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
 "Holiday fixes!

  Two batches from amd, and one group of i915 changes.

  amdgpu:
   - Spelling fix
   - BO pin fix
   - Properly handle polaris 10/11 overlap asics
   - GMC9 fix
   - SR-IOV suspend fix
   - DCN 3.1.4 fix
   - KFD userptr locking fix
   - SMU13.x fixes
   - GDS/GWS/OA handling fix
   - Reserved VMID handling fixes
   - FRU EEPROM fix
   - BO validation fixes
   - Avoid large variable on the stack
   - S0ix fixes
   - SMU 13.x fixes
   - VCN fix
   - Add missing fence reference

  amdkfd:
   - Fix init vm error handling
   - Fix double release of compute pasid

  i915
   - Documentation fixes
   - OA-perf related fix
   - VLV/CHV HDMI/DP audio fix
   - Display DDI/Transcoder fix
   - Migrate fixes"

* tag 'drm-next-2022-12-23' of git://anongit.freedesktop.org/drm/drm: (39 commits)
  drm/amdgpu: grab extra fence reference for drm_sched_job_add_dependency
  drm/amdgpu: enable VCN DPG for GC IP v11.0.4
  drm/amdgpu: skip mes self test after s0i3 resume for MES IP v11.0
  drm/amd/pm: correct the fan speed retrieving in PWM for some SMU13 asics
  drm/amd/pm: bump SMU13.0.0 driver_if header to version 0x34
  drm/amdgpu: skip MES for S0ix as well since it's part of GFX
  drm/amd/pm: avoid large variable on kernel stack
  drm/amdkfd: Fix double release compute pasid
  drm/amdkfd: Fix kfd_process_device_init_vm error handling
  drm/amd/pm: update SMU13.0.0 reported maximum shader clock
  drm/amd/pm: correct SMU13.0.0 pstate profiling clock settings
  drm/amd/pm: enable GPO dynamic control support for SMU13.0.7
  drm/amd/pm: enable GPO dynamic control support for SMU13.0.0
  drm/amdgpu: revert "generally allow over-commit during BO allocation"
  drm/amdgpu: Remove unnecessary domain argument
  drm/amdgpu: Fix size validation for non-exclusive domains (v4)
  drm/amdgpu: Check if fru_addr is not NULL (v2)
  drm/i915/ttm: consider CCS for backup objects
  drm/i915/migrate: fix corner case in CCS aux copying
  drm/amdgpu: rework reserved VMID handling
  ...

Merge tag 'mips_6.2_1' of git://git./linux/kernel/git/mips/linux

Pull MIPS fixes from Thomas Bogendoerfer:
 "Fixes due to DT changes"

* tag 'mips_6.2_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: dts: bcm63268: Add missing properties to the TWD node
  MIPS: ralink: mt7621: avoid to init common ralink reset controller

Merge tag 'mm-hotfixes-stable-2022-12-22-14-34' of git://git./linux/kernel/git/akpm/mm

Pull hotfixes from Andrew Morton:
 "Eight fixes, all cc:stable. One is for gcov and the remainder are MM"

* tag 'mm-hotfixes-stable-2022-12-22-14-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  gcov: add support for checksum field
  test_maple_tree: add test for mas_spanning_rebalance() on insufficient data
  maple_tree: fix mas_spanning_rebalance() on insufficient data
  hugetlb: really allocate vma lock for all sharable vmas
  kmsan: export kmsan_handle_urb
  kmsan: include linux/vmalloc.h
  mm/mempolicy: fix memory leak in set_mempolicy_home_node system call
  mm, mremap: fix mremap() expanding vma with addr inside vma