git.monstr.eu Git - linux-2.6-microblaze.git/log

geneve: do not modify the shared tunnel info when PMTU triggers an ICMP reply

When the interface is part of a bridge or an Open vSwitch port and a
packet exceed a PMTU estimate, an ICMP reply is sent to the sender. When
using the external mode (collect metadata) the source and destination
addresses are reversed, so that Open vSwitch can match the packet
against an existing (reverse) flow.

But inverting the source and destination addresses in the shared
ip_tunnel_info will make following packets of the flow to use a wrong
destination address (packets will be tunnelled to itself), if the flow
isn't updated. Which happens with Open vSwitch, until the flow times
out.

Fixes this by uncloning the skb's ip_tunnel_info before inverting its
source and destination addresses, so that the modification will only be
made for the PTMU packet, not the following ones.

Fixes: c1a800e88dbf ("geneve: Support for PMTU discovery on directly bridged links")
Tested-by: Eelco Chaudron <echaudro@redhat.com>
Reviewed-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

vxlan: do not modify the shared tunnel info when PMTU triggers an ICMP reply

When the interface is part of a bridge or an Open vSwitch port and a
packet exceed a PMTU estimate, an ICMP reply is sent to the sender. When
using the external mode (collect metadata) the source and destination
addresses are reversed, so that Open vSwitch can match the packet
against an existing (reverse) flow.

But inverting the source and destination addresses in the shared
ip_tunnel_info will make following packets of the flow to use a wrong
destination address (packets will be tunnelled to itself), if the flow
isn't updated. Which happens with Open vSwitch, until the flow times
out.

Fixes this by uncloning the skb's ip_tunnel_info before inverting its
source and destination addresses, so that the modification will only be
made for the PTMU packet, not the following ones.

Fixes: fc68c99577cc ("vxlan: Support for PMTU discovery on directly bridged links")
Tested-by: Eelco Chaudron <echaudro@redhat.com>
Reviewed-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'nfc-fixes'

Xiaoming Ni says:

====================
nfc: fix Resource leakage and endless loop

fix Resource leakage and endless loop in net/nfc/llcp_sock.c,
reported by "kiyin(尹亮)".

Link: https://www.openwall.com/lists/oss-security/2020/11/01/1
====================
math: Export mul_u64_u64_div_u64

Fixes: f51d7bf1dbe5 ("ptp_qoriq: fix overflow in ptp_qoriq_adjfine() u64 calcalation")
Signed-off-by: David S. Miller <davem@davemloft.net>

nfc: Avoid endless loops caused by repeated llcp_sock_connect()

When sock_wait_state() returns -EINPROGRESS, "sk->sk_state" is
LLCP_CONNECTING. In this case, llcp_sock_connect() is repeatedly invoked,
nfc_llcp_sock_link() will add sk to local->connecting_sockets twice.
sk->sk_node->next will point to itself, that will make an endless loop
and hang-up the system.
To fix it, check whether sk->sk_state is LLCP_CONNECTING in
llcp_sock_connect() to avoid repeated invoking.

Fixes: b4011239a08e ("NFC: llcp: Fix non blocking sockets connections")
Reported-by: "kiyin(尹亮)" <kiyin@tencent.com>
Link: https://www.openwall.com/lists/oss-security/2020/11/01/1
Cc: <stable@vger.kernel.org> #v3.11
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfc: fix memory leak in llcp_sock_connect()

In llcp_sock_connect(), use kmemdup to allocate memory for
"llcp_sock->service_name". The memory is not released in the sock_unlink
label of the subsequent failure branch.
As a result, memory leakage occurs.

fix CVE-2020-25672

Fixes: d646960f7986 ("NFC: Initial LLCP support")
Reported-by: "kiyin(尹亮)" <kiyin@tencent.com>
Link: https://www.openwall.com/lists/oss-security/2020/11/01/1
Cc: <stable@vger.kernel.org> #v3.3
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfc: fix refcount leak in llcp_sock_connect()

nfc_llcp_local_get() is invoked in llcp_sock_connect(),
but nfc_llcp_local_put() is not invoked in subsequent failure branches.
As a result, refcount leakage occurs.
To fix it, add calling nfc_llcp_local_put().

fix CVE-2020-25671
Fixes: c7aa12252f51 ("NFC: Take a reference on the LLCP local pointer when creating a socket")
Reported-by: "kiyin(尹亮)" <kiyin@tencent.com>
Link: https://www.openwall.com/lists/oss-security/2020/11/01/1
Cc: <stable@vger.kernel.org> #v3.6
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfc: fix refcount leak in llcp_sock_bind()

nfc_llcp_local_get() is invoked in llcp_sock_bind(),
but nfc_llcp_local_put() is not invoked in subsequent failure branches.
As a result, refcount leakage occurs.
To fix it, add calling nfc_llcp_local_put().

fix CVE-2020-25670
Fixes: c7aa12252f51 ("NFC: Take a reference on the LLCP local pointer when creating a socket")
Reported-by: "kiyin(尹亮)" <kiyin@tencent.com>
Link: https://www.openwall.com/lists/oss-security/2020/11/01/1
Cc: <stable@vger.kernel.org> #v3.6
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

amd-xgbe: Update DMA coherency values

Based on the IOMMU configuration, the current cache control settings can
result in possible coherency issues. The hardware team has recommended
new settings for the PCI device path to eliminate the issue.

Fixes: 6f595959c095 ("amd-xgbe: Adjust register settings to improve performance")
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: lantiq_gswip: Let GSWIP automatically set the xMII clock

The xMII interface clock depends on the PHY interface (MII, RMII, RGMII)
as well as the current link speed. Explicitly configure the GSWIP to
automatically select the appropriate xMII interface clock.

This fixes an issue seen by some users where ports using an external
RMII or RGMII PHY were deaf (no RX or TX traffic could be seen). Most
likely this is due to an "invalid" xMII clock being selected either by
the bootloader or hardware-defaults.

Fixes: 14fceff4771e51 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

dt-bindings: net: micrel-ksz90x1.txt: correct documentation

Correct the Micrel phy documentation for the ksz9021 and ksz9031 phys
for how the phy skews are set.

Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: axienet: allow setups without MDIO

In setups with fixed-link settings there is no mdio node in DTS.
axienet_probe() already handles that gracefully but lp->mii_bus is
then NULL.

Fix code that tries to blindly grab the MDIO lock by introducing two helper
functions that make the locking conditional.

Signed-off-by: Daniel Mack <daniel@zonque.org>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: only unset VLAN filtering when last port leaves last VLAN-aware bridge

DSA is aware of switches with global VLAN filtering since the blamed
commit, but it makes a bad decision when multiple bridges are spanning
the same switch:

ip link add br0 type bridge vlan_filtering 1
ip link add br1 type bridge vlan_filtering 1
ip link set swp2 master br0
ip link set swp3 master br0
ip link set swp4 master br1
ip link set swp5 master br1
ip link set swp5 nomaster
ip link set swp4 nomaster
[138665.939930] sja1105 spi0.1: port 3: dsa_core: VLAN filtering is a global setting
[138665.947514] DSA: failed to notify DSA_NOTIFIER_BRIDGE_LEAVE

When all ports leave br1, DSA blindly attempts to disable VLAN filtering
on the switch, ignoring the fact that br0 still exists and is VLAN-aware
too. It fails while doing that.

This patch checks whether any port exists at all and is under a
VLAN-aware bridge.

Fixes: d371b7c92d19 ("net: dsa: Unset vlan_filtering when ports leave the bridge")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'akpm' (patches from Andrew)

Merge misc fixes from Andrew Morton:
"14 patches.

  Subsystems affected by this patch series: mm (hugetlb, kasan, gup,
  selftests, z3fold, kfence, memblock, and highmem), squashfs, ia64,
  gcov, and mailmap"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mailmap: update Andrey Konovalov's email address
  mm/highmem: fix CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP
  mm: memblock: fix section mismatch warning again
  kfence: make compatible with kmemleak
  gcov: fix clang-11+ support
  ia64: fix format strings for err_inject
  ia64: mca: allocate early mca with GFP_ATOMIC
  squashfs: fix xattr id and id lookup sanity checks
  squashfs: fix inode lookup sanity checks
  z3fold: prevent reclaim/free race for headless pages
  selftests/vm: fix out-of-tree build
  mm/mmu_notifiers: ensure range_end() is paired with range_start()
  kasan: fix per-page tags for non-page_alloc pages
  hugetlb_cgroup: fix imbalanced css_get and css_put pair for shared mappings

Merge tag 'for-linus' of git://git./linux/kernel/git/rdma/rdma

Pull rdma fixes from Jason Gunthorpe:
"Not much going on, just some small bug fixes:

   - Typo causing a regression in mlx5 devx

   - Regression in the recent hns rework causing the HW to get out of
     sync

   - Long-standing cxgb4 adaptor crash when destroying cm ids"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/cxgb4: Fix adapter LE hash errors while destroying ipv6 listening server
  RDMA/hns: Fix bug during CMDQ initialization
  RDMA/mlx5: Fix typo in destroy_mkey inbox

Merge tag 'mfd-fixes-5.12' of git://git./linux/kernel/git/lee/mfd

Pull mfs fix from Lee Jones:
"Unconstify editable placeholder structures"

* tag 'mfd-fixes-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
mfd: intel_quark_i2c_gpio: Revert "Constify static struct resources"

Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull arm64 fixes from Will Deacon:
"Minor fixes all over, ranging from typos to tests to errata
  workarounds:

   - Fix possible memory hotplug failure with KASLR

   - Fix FFR value in SVE kselftest

   - Fix backtraces reported in /proc/$pid/stack

   - Disable broken CnP implementation on NVIDIA Carmel

   - Typo fixes and ACPI documentation clarification

   - Fix some W=1 warnings"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: kernel: disable CNP on Carmel
  arm64/process.c: fix Wmissing-prototypes build warnings
  kselftest/arm64: sve: Do not use non-canonical FFR register value
  arm64: mm: correct the inside linear map range during hotplug check
  arm64: kdump: update ppos when reading elfcorehdr
  arm64: cpuinfo: Fix a typo
  Documentation: arm64/acpi : clarify arm64 support of IBFT
  arm64: stacktrace: don't trace arch_stack_walk()
  arm64: csum: cast to the proper type

mailmap: update the email address for Chris Chiu

Redirect my older email addresses in the git logs.

Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mailmap: update Andrey Konovalov's email address

Use my personal email, the @google.com one will stop functioning soon.

Link: https://lkml.kernel.org/r/ead0e9c32a2f70e0bde6f63b3b9470e0ef13d2ee.1616107969.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/highmem: fix CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP

The kernel test robot found that __kmap_local_sched_out() was not
correctly skipping the guard pages when DEBUG_KMAP_LOCAL_FORCE_MAP was
set.[1] This was due to DEBUG_HIGHMEM check being used.

Change the configuration check to be correct.

[1] https://lore.kernel.org/lkml/20210304083825.GB17830@xsang-OptiPlex-9020/

Link: https://lkml.kernel.org/r/20210318230657.1497881-1-ira.weiny@intel.com
Fixes: 0e91a0c6984c ("mm/highmem: Provide CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP")
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Oliver Sang <oliver.sang@intel.com>
Cc: Chaitanya Kulkarni <Chaitanya.Kulkarni@wdc.com>
Cc: David Sterba <dsterba@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: memblock: fix section mismatch warning again

Commit 34dc2efb39a2 ("memblock: fix section mismatch warning") marked
memblock_bottom_up() and memblock_set_bottom_up() as __init, but they
could be referenced from non-init functions like
memblock_find_in_range_node() on architectures that enable
CONFIG_ARCH_KEEP_MEMBLOCK.

For such builds kernel test robot reports:

   WARNING: modpost: vmlinux.o(.text+0x74fea4): Section mismatch in reference from the function memblock_find_in_range_node() to the function .init.text:memblock_bottom_up()
   The function memblock_find_in_range_node() references the function __init memblock_bottom_up().
   This is often because memblock_find_in_range_node lacks a __init  annotation or the annotation of memblock_bottom_up is wrong.

Replace __init annotations with __init_memblock annotations so that the
appropriate section will be selected depending on
CONFIG_ARCH_KEEP_MEMBLOCK.

Link: https://lore.kernel.org/lkml/202103160133.UzhgY0wt-lkp@intel.com
Link: https://lkml.kernel.org/r/20210316171347.14084-1-rppt@kernel.org
Fixes: 34dc2efb39a2 ("memblock: fix section mismatch warning")
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kfence: make compatible with kmemleak

Because memblock allocations are registered with kmemleak, the KFENCE
pool was seen by kmemleak as one large object. Later allocations
through kfence_alloc() that were registered with kmemleak via
slab_post_alloc_hook() would then overlap and trigger a warning.
Therefore, once the pool is initialized, we can remove (free) it from
kmemleak again, since it should be treated as allocator-internal and be
seen as "free memory".

The second problem is that kmemleak is passed the rounded size, and not
the originally requested size, which is also the size of KFENCE objects.
To avoid kmemleak scanning past the end of an object and trigger a
KFENCE out-of-bounds error, fix the size if it is a KFENCE object.

For simplicity, to avoid a call to kfence_ksize() in
slab_post_alloc_hook() (and avoid new IS_ENABLED(CONFIG_DEBUG_KMEMLEAK)
guard), just call kfence_ksize() in mm/kmemleak.c:create_object().

Link: https://lkml.kernel.org/r/20210317084740.3099921-1-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Reported-by: Luis Henriques <lhenriques@suse.de>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Luis Henriques <lhenriques@suse.de>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gcov: fix clang-11+ support

LLVM changed the expected function signatures for llvm_gcda_start_file()
and llvm_gcda_emit_function() in the clang-11 release. Users of
clang-11 or newer may have noticed their kernels failing to boot due to
a panic when enabling CONFIG_GCOV_KERNEL=y +CONFIG_GCOV_PROFILE_ALL=y.
Fix up the function signatures so calling these functions doesn't panic
the kernel.

Link: https://reviews.llvm.org/rGcdd683b516d147925212724b09ec6fb792a40041
Link: https://reviews.llvm.org/rG13a633b438b6500ecad9e4f936ebadf3411d0f44
Link: https://lkml.kernel.org/r/20210312224132.3413602-2-ndesaulniers@google.com
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reported-by: Prasad Sodagudi <psodagud@quicinc.com>
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Fangrui Song <maskray@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Cc: <stable@vger.kernel.org> [5.4+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ia64: fix format strings for err_inject

Fix warning with %lx / u64 mismatch:

  arch/ia64/kernel/err_inject.c: In function 'show_resources':
  arch/ia64/kernel/err_inject.c:62:22: warning:
    format '%lx' expects argument of type 'long unsigned int',
    but argument 3 has type 'u64' {aka 'long long unsigned int'}
     62 |  return sprintf(buf, "%lx", name[cpu]);   \
        |                      ^~~~~~~

Link: https://lkml.kernel.org/r/20210313104312.1548232-1-slyfox@gentoo.org
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ia64: mca: allocate early mca with GFP_ATOMIC

The sleep warning happens at early boot right at secondary CPU
activation bootup:

    smp: Bringing up secondary CPUs ...
    BUG: sleeping function called from invalid context at mm/page_alloc.c:4942
    in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/1
    CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.12.0-rc2-00007-g79e228d0b611-dirty #99
    ..
    Call Trace:
      show_stack+0x90/0xc0
      dump_stack+0x150/0x1c0
      ___might_sleep+0x1c0/0x2a0
      __might_sleep+0xa0/0x160
      __alloc_pages_nodemask+0x1a0/0x600
      alloc_page_interleave+0x30/0x1c0
      alloc_pages_current+0x2c0/0x340
      __get_free_pages+0x30/0xa0
      ia64_mca_cpu_init+0x2d0/0x3a0
      cpu_init+0x8b0/0x1440
      start_secondary+0x60/0x700
      start_ap+0x750/0x780
    Fixed BSP b0 value from CPU 1

As I understand interrupts are not enabled yet and system has a lot of
memory.  There is little chance to sleep and switch to GFP_ATOMIC should
be a no-op.

Link: https://lkml.kernel.org/r/20210315085045.204414-1-slyfox@gentoo.org
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

squashfs: fix xattr id and id lookup sanity checks

The checks for maximum metadata block size is missing
SQUASHFS_BLOCK_OFFSET (the two byte length count).

Link: https://lkml.kernel.org/r/2069685113.2081245.1614583677427@webmail.123-reg.co.uk
Fixes: f37aa4c7366e23f ("squashfs: add more sanity checks in id lookup")
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Cc: Sean Nyekjaer <sean@geanix.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

squashfs: fix inode lookup sanity checks

When mouting a squashfs image created without inode compression it fails
with: "unable to read inode lookup table"

It turns out that the BLOCK_OFFSET is missing when checking the
SQUASHFS_METADATA_SIZE agaist the actual size.

Link: https://lkml.kernel.org/r/20210226092903.1473545-1-sean@geanix.com
Fixes: eabac19e40c0 ("squashfs: add more sanity checks in inode lookup")
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Acked-by: Phillip Lougher <phillip@squashfs.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

z3fold: prevent reclaim/free race for headless pages

Commit ca0246bb97c2 ("z3fold: fix possible reclaim races") introduced
the PAGE_CLAIMED flag "to avoid racing on a z3fold 'headless' page
release." By atomically testing and setting the bit in each of
z3fold_free() and z3fold_reclaim_page(), a double-free was avoided.

However, commit dcf5aedb24f8 ("z3fold: stricter locking and more careful
reclaim") appears to have unintentionally broken this behavior by moving
the PAGE_CLAIMED check in z3fold_reclaim_page() to after the page lock
gets taken, which only happens for non-headless pages.  For headless
pages, the check is now skipped entirely and races can occur again.

I have observed such a race on my system:

    page:00000000ffbd76b7 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x165316
    flags: 0x2ffff0000000000()
    raw: 02ffff0000000000 ffffea0004535f48 ffff8881d553a170 0000000000000000
    raw: 0000000000000000 0000000000000011 00000000ffffffff 0000000000000000
    page dumped because: VM_BUG_ON_PAGE(page_ref_count(page) == 0)
    ------------[ cut here ]------------
    kernel BUG at include/linux/mm.h:707!
    invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
    CPU: 2 PID: 291928 Comm: kworker/2:0 Tainted: G    B             5.10.7-arch1-1-kasan #1
    Hardware name: Gigabyte Technology Co., Ltd. H97N-WIFI/H97N-WIFI, BIOS F9b 03/03/2016
    Workqueue: zswap-shrink shrink_worker
    RIP: 0010:__free_pages+0x10a/0x130
    Code: c1 e7 06 48 01 ef 45 85 e4 74 d1 44 89 e6 31 d2 41 83 ec 01 e8 e7 b0 ff ff eb da 48 c7 c6 e0 32 91 88 48 89 ef e8 a6 89 f8 ff <0f> 0b 4c 89 e7 e8 fc 79 07 00 e9 33 ff ff ff 48 89 ef e8 ff 79 07
    RSP: 0000:ffff88819a2ffb98 EFLAGS: 00010296
    RAX: 0000000000000000 RBX: ffffea000594c5a8 RCX: 0000000000000000
    RDX: 1ffffd4000b298b7 RSI: 0000000000000000 RDI: ffffea000594c5b8
    RBP: ffffea000594c580 R08: 000000000000003e R09: ffff8881d5520bbb
    R10: ffffed103aaa4177 R11: 0000000000000001 R12: ffffea000594c5b4
    R13: 0000000000000000 R14: ffff888165316000 R15: ffffea000594c588
    FS:  0000000000000000(0000) GS:ffff8881d5500000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: 00007f7c8c3654d8 CR3: 0000000103f42004 CR4: 00000000001706e0
    Call Trace:
     z3fold_zpool_shrink+0x9b6/0x1240
     shrink_worker+0x35/0x90
     process_one_work+0x70c/0x1210
     worker_thread+0x539/0x1200
     kthread+0x330/0x400
     ret_from_fork+0x22/0x30
    Modules linked in: rfcomm ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter ccm algif_aead des_generic libdes ecb algif_skcipher cmac bnep md4 algif_hash af_alg vfat fat intel_rapl_msr intel_rapl_common x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel iwlmvm hid_logitech_hidpp kvm at24 mac80211 snd_hda_codec_realtek iTCO_wdt snd_hda_codec_generic intel_pmc_bxt snd_hda_codec_hdmi ledtrig_audio iTCO_vendor_support mei_wdt mei_hdcp snd_hda_intel snd_intel_dspcfg libarc4 soundwire_intel irqbypass iwlwifi soundwire_generic_allocation rapl soundwire_cadence intel_cstate snd_hda_codec intel_uncore btusb joydev mousedev snd_usb_audio pcspkr btrtl uvcvideo nouveau btbcm i2c_i801 btintel snd_hda_core videobuf2_vmalloc i2c_smbus snd_usbmidi_lib videobuf2_memops bluetooth snd_hwdep soundwire_bus snd_soc_rt5640 videobuf2_v4l2 cfg80211 snd_soc_rl6231 videobuf2_common snd_rawmidi lpc_ich alx videodev mdio snd_seq_device snd_soc_core mc ecdh_generic mxm_wmi mei_me
     hid_logitech_dj wmi snd_compress e1000e ac97_bus mei ttm rfkill snd_pcm_dmaengine ecc snd_pcm snd_timer snd soundcore mac_hid acpi_pad pkcs8_key_parser it87 hwmon_vid crypto_user fuse ip_tables x_tables ext4 crc32c_generic crc16 mbcache jbd2 dm_crypt cbc encrypted_keys trusted tpm rng_core usbhid dm_mod crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel crypto_simd cryptd glue_helper xhci_pci xhci_pci_renesas i915 video intel_gtt i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cec drm agpgart
    ---[ end trace 126d646fc3dc0ad8 ]---

To fix the issue, re-add the earlier test and set in the case where we
have a headless page.

Link: https://lkml.kernel.org/r/c8106dbe6d8390b290cd1d7f873a2942e805349e.1615452048.git.tommyhebb@gmail.com
Fixes: dcf5aedb24f8 ("z3fold: stricter locking and more careful reclaim")
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Reviewed-by: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Jongseok Kim <ks77sj@gmail.com>
Cc: Snild Dolkow <snild@sony.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

selftests/vm: fix out-of-tree build

When building out-of-tree, attempting to make target from $(OUTPUT) directory:

make[1]: *** No rule to make target '$(OUTPUT)/protection_keys.c', needed by '$(OUTPUT)/protection_keys_32'.

Link: https://lkml.kernel.org/r/20210315094700.522753-1-rong.a.chen@intel.com
Signed-off-by: Rong Chen <rong.a.chen@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/mmu_notifiers: ensure range_end() is paired with range_start()

If one or more notifiers fails .invalidate_range_start(), invoke
.invalidate_range_end() for "all" notifiers.  If there are multiple
notifiers, those that did not fail are expecting _start() and _end() to
be paired, e.g.  KVM's mmu_notifier_count would become imbalanced.
Disallow notifiers that can fail _start() from implementing _end() so
that it's unnecessary to either track which notifiers rejected _start(),
or had already succeeded prior to a failed _start().

Note, the existing behavior of calling _start() on all notifiers even
after a previous notifier failed _start() was an unintented "feature".
Make it canon now that the behavior is depended on for correctness.

As of today, the bug is likely benign:

  1. The only caller of the non-blocking notifier is OOM kill.
  2. The only notifiers that can fail _start() are the i915 and Nouveau
     drivers.
  3. The only notifiers that utilize _end() are the SGI UV GRU driver
     and KVM.
  4. The GRU driver will never coincide with the i195/Nouveau drivers.
  5. An imbalanced kvm->mmu_notifier_count only causes soft lockup in the
     _guest_, and the guest is already doomed due to being an OOM victim.

Fix the bug now to play nice with future usage, e.g.  KVM has a
potential use case for blocking memslot updates in KVM while an
invalidation is in-progress, and failure to unblock would result in said
updates being blocked indefinitely and hanging.

Found by inspection.  Verified by adding a second notifier in KVM that
periodically returns -EAGAIN on non-blockable ranges, triggering OOM,
and observing that KVM exits with an elevated notifier count.

Link: https://lkml.kernel.org/r/20210311180057.1582638-1-seanjc@google.com
Fixes: 93065ac753e4 ("mm, oom: distinguish blockable mode for mmu notifiers")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ben Gardon <bgardon@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan: fix per-page tags for non-page_alloc pages

To allow performing tag checks on page_alloc addresses obtained via
page_address(), tag-based KASAN modes store tags for page_alloc
allocations in page->flags.

Currently, the default tag value stored in page->flags is 0x00.
Therefore, page_address() returns a 0x00ffff...  address for pages that
were not allocated via page_alloc.

This might cause problems.  A particular case we encountered is a
conflict with KFENCE.  If a KFENCE-allocated slab object is being freed
via kfree(page_address(page) + offset), the address passed to kfree()
will get tagged with 0x00 (as slab pages keep the default per-page
tags).  This leads to is_kfence_address() check failing, and a KFENCE
object ending up in normal slab freelist, which causes memory
corruptions.

This patch changes the way KASAN stores tag in page-flags: they are now
stored xor'ed with 0xff.  This way, KASAN doesn't need to initialize
per-page flags for every created page, which might be slow.

With this change, page_address() returns natively-tagged (with 0xff)
pointers for pages that didn't have tags set explicitly.

This patch fixes the encountered conflict with KFENCE and prevents more
similar issues that can occur in the future.

Link: https://lkml.kernel.org/r/1a41abb11c51b264511d9e71c303bb16d5cb367b.1615475452.git.andreyknvl@google.com
Fixes: 2813b9c02962 ("kasan, mm, arm64: tag non slab memory allocated via pagealloc")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hugetlb_cgroup: fix imbalanced css_get and css_put pair for shared mappings

The current implementation of hugetlb_cgroup for shared mappings could
have different behavior.  Consider the following two scenarios:

1.Assume initial css reference count of hugetlb_cgroup is 1:
  1.1 Call hugetlb_reserve_pages with from = 1, to = 2. So css reference
      count is 2 associated with 1 file_region.
  1.2 Call hugetlb_reserve_pages with from = 2, to = 3. So css reference
      count is 3 associated with 2 file_region.
  1.3 coalesce_file_region will coalesce these two file_regions into
      one. So css reference count is 3 associated with 1 file_region
      now.

2.Assume initial css reference count of hugetlb_cgroup is 1 again:
  2.1 Call hugetlb_reserve_pages with from = 1, to = 3. So css reference
      count is 2 associated with 1 file_region.

Therefore, we might have one file_region while holding one or more css
reference counts. This inconsistency could lead to imbalanced css_get()
and css_put() pair. If we do css_put one by one (i.g. hole punch case),
scenario 2 would put one more css reference. If we do css_put all
together (i.g. truncate case), scenario 1 will leak one css reference.

The imbalanced css_get() and css_put() pair would result in a non-zero
reference when we try to destroy the hugetlb cgroup. The hugetlb cgroup
directory is removed __but__ associated resource is not freed. This
might result in OOM or can not create a new hugetlb cgroup in a busy
workload ultimately.

In order to fix this, we have to make sure that one file_region must
hold exactly one css reference. So in coalesce_file_region case, we
should release one css reference before coalescence. Also only put css
reference when the entire file_region is removed.

The last thing to note is that the caller of region_add() will only hold
one reference to h_cg->css for the whole contiguous reservation region.
But this area might be scattered when there are already some
file_regions reside in it. As a result, many file_regions may share only
one h_cg->css reference. In order to ensure that one file_region must
hold exactly one css reference, we should do css_get() for each
file_region and release the reference held by caller when they are done.

[linmiaohe@huawei.com: fix imbalanced css_get and css_put pair for shared mappings]
Link: https://lkml.kernel.org/r/20210316023002.53921-1-linmiaohe@huawei.com
Link: https://lkml.kernel.org/r/20210301120540.37076-1-linmiaohe@huawei.com
Fixes: 075a61d07a8e ("hugetlb_cgroup: add accounting for shared mappings")
Reported-by: kernel test robot <lkp@intel.com> (auto build test ERROR)
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Wanpeng Li <liwp.linux@gmail.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

RDMA/cxgb4: Fix adapter LE hash errors while destroying ipv6 listening server

Not setting the ipv6 bit while destroying ipv6 listening servers may
result in potential fatal adapter errors due to lookup engine memory hash
errors. Therefore always set ipv6 field while destroying ipv6 listening
servers.

Fixes: 830662f6f032 ("RDMA/cxgb4: Add support for active and passive open connection with IPv6 address")
Link: https://lore.kernel.org/r/20210324190453.8171-1-bharat@chelsio.com
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

arm64: kernel: disable CNP on Carmel

On NVIDIA Carmel cores, CNP behaves differently than it does on standard
ARM cores. On Carmel, if two cores have CNP enabled and share an L2 TLB
entry created by core0 for a specific ASID, a non-shareable TLBI from
core1 may still see the shared entry. On standard ARM cores, that TLBI
will invalidate the shared entry as well.

This causes issues with patchsets that attempt to do local TLBIs based
on cpumasks instead of broadcast TLBIs. Avoid these issues by disabling
CNP support for NVIDIA Carmel cores.

Signed-off-by: Rich Wiley <rwiley@nvidia.com>
Link: https://lore.kernel.org/r/20210324002809.30271-1-rwiley@nvidia.com
[will: Fix pre-existing whitespace issue]
Signed-off-by: Will Deacon <will@kernel.org>

arm64/process.c: fix Wmissing-prototypes build warnings

Fix GCC warnings reported when building with "-Wmissing-prototypes":

  arch/arm64/kernel/process.c:261:6: warning: no previous prototype for '__show_regs' [-Wmissing-prototypes]
      261 | void __show_regs(struct pt_regs *regs)
          |      ^~~~~~~~~~~
  arch/arm64/kernel/process.c:307:6: warning: no previous prototype for '__show_regs_alloc_free' [-Wmissing-prototypes]
      307 | void __show_regs_alloc_free(struct pt_regs *regs)
          |      ^~~~~~~~~~~~~~~~~~~~~~
  arch/arm64/kernel/process.c:365:5: warning: no previous prototype for 'arch_dup_task_struct' [-Wmissing-prototypes]
      365 | int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
          |     ^~~~~~~~~~~~~~~~~~~~
  arch/arm64/kernel/process.c:546:41: warning: no previous prototype for '__switch_to' [-Wmissing-prototypes]
      546 | __notrace_funcgraph struct task_struct *__switch_to(struct task_struct *prev,
          |                                         ^~~~~~~~~~~
  arch/arm64/kernel/process.c:710:25: warning: no previous prototype for 'arm64_preempt_schedule_irq' [-Wmissing-prototypes]
      710 | asmlinkage void __sched arm64_preempt_schedule_irq(void)
          |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~

Link: https://lore.kernel.org/lkml/202103192250.AennsfXM-lkp@intel.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
Link: https://lore.kernel.org/r/1616568899-986-1-git-send-email-maninder1.s@samsung.com
Signed-off-by: Will Deacon <will@kernel.org>

Merge git://git./linux/kernel/git/netdev/net

Pull networking fixes from David Miller:
"Various fixes, all over:

   1) Fix overflow in ptp_qoriq_adjfine(), from Yangbo Lu.

   2) Always store the rx queue mapping in veth, from Maciej
      Fijalkowski.

   3) Don't allow vmlinux btf in map_create, from Alexei Starovoitov.

   4) Fix memory leak in octeontx2-af from Colin Ian King.

   5) Use kvalloc in bpf x86 JIT for storing jit'd addresses, from
      Yonghong Song.

   6) Fix tx ptp stats in mlx5, from Aya Levin.

   7) Check correct ip version in tun decap, fropm Roi Dayan.

   8) Fix rate calculation in mlx5 E-Switch code, from arav Pandit.

   9) Work item memork leak in mlx5, from Shay Drory.

  10) Fix ip6ip6 tunnel crash with bpf, from Daniel Borkmann.

  11) Lack of preemptrion awareness in macvlan, from Eric Dumazet.

  12) Fix data race in pxa168_eth, from Pavel Andrianov.

  13) Range validate stab in red_check_params(), from Eric Dumazet.

  14) Inherit vlan filtering setting properly in b53 driver, from
      Florian Fainelli.

  15) Fix rtnl locking in igc driver, from Sasha Neftin.

  16) Pause handling fixes in igc driver, from Muhammad Husaini
      Zulkifli.

  17) Missing rtnl locking in e1000_reset_task, from Vitaly Lifshits.

  18) Use after free in qlcnic, from Lv Yunlong.

  19) fix crash in fritzpci mISDN, from Tong Zhang.

  20) Premature rx buffer reuse in igb, from Li RongQing.

  21) Missing termination of ip[a driver message handler arrays, from
      Alex Elder.

  22) Fix race between "x25_close" and "x25_xmit"/"x25_rx" in hdlc_x25
      driver, from Xie He.

  23) Use after free in c_can_pci_remove(), from Tong Zhang.

  24) Uninitialized variable use in nl80211, from Jarod Wilson.

  25) Off by one size calc in bpf verifier, from Piotr Krysiuk.

  26) Use delayed work instead of deferrable for flowtable GC, from
      Yinjun Zhang.

  27) Fix infinite loop in NPC unmap of octeontx2 driver, from
      Hariprasad Kelam.

  28) Fix being unable to change MTU of dwmac-sun8i devices due to lack
      of fifo sizes, from Corentin Labbe.

  29) DMA use after free in r8169 with WoL, fom Heiner Kallweit.

  30) Mismatched prototypes in isdn-capi, from Arnd Bergmann.

  31) Fix psample UAPI breakage, from Ido Schimmel"

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (171 commits)
  psample: Fix user API breakage
  math: Export mul_u64_u64_div_u64
  ch_ktls: fix enum-conversion warning
  octeontx2-af: Fix memory leak of object buf
  ptp_qoriq: fix overflow in ptp_qoriq_adjfine() u64 calcalation
  net: bridge: don't notify switchdev for local FDB addresses
  net/sched: act_ct: clear post_ct if doing ct_clear
  net: dsa: don't assign an error value to tag_ops
  isdn: capi: fix mismatched prototypes
  net/mlx5: SF, do not use ecpu bit for vhca state processing
  net/mlx5e: Fix division by 0 in mlx5e_select_queue
  net/mlx5e: Fix error path for ethtool set-priv-flag
  net/mlx5e: Offload tuple rewrite for non-CT flows
  net/mlx5e: Allow to match on MPLS parameters only for MPLS over UDP
  net/mlx5: Add back multicast stats for uplink representor
  net: ipconfig: ic_dev can be NULL in ic_close_devs
  MAINTAINERS: Combine "QLOGIC QLGE 10Gb ETHERNET DRIVER" sections into one
  docs: networking: Fix a typo
  r8169: fix DMA being used after buffer free if WoL is enabled
  net: ipa: fix init header command validation
  ...

psample: Fix user API breakage

Cited commit added a new attribute before the existing group reference
count attribute, thereby changing its value and breaking existing
applications on new kernels.

Before:

# psample -l
libpsample ERROR psample_group_foreach: failed to recv message: Operation not supported

After:

# psample -l
Group Num Refcount Group Seq
1 1 0

Fix by restoring the value of the old attribute and remove the
misleading comments from the enumerator to avoid future bugs.

Cc: stable@vger.kernel.org
Fixes: d8bed686ab96 ("net: psample: Add tunnel support")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reported-by: Adiel Bidani <adielb@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

math: Export mul_u64_u64_div_u64

Fixes: f51d7bf1dbe5 ("ptp_qoriq: fix overflow in ptp_qoriq_adjfine() u64 calcalation")
Signed-off-by: David S. Miller <davem@davemloft.net>

ch_ktls: fix enum-conversion warning

gcc points out an incorrect enum assignment:

drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c: In function 'chcr_ktls_cpl_set_tcb_rpl':
drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c:684:22: warning: implicit conversion from 'enum <anonymous>' to 'enum ch_ktls_open_state' [-Wenum-conversion]

This appears harmless, and should apparently use 'CH_KTLS_OPEN_SUCCESS'
instead of 'false', with the same value '0'.

Fixes: efca3878a5fb ("ch_ktls: Issue if connection offload fails")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

octeontx2-af: Fix memory leak of object buf

Currently the error return path when lfs fails to allocate is not free'ing
the memory allocated to buf. Fix this by adding the missing kfree.

Addresses-Coverity: ("Resource leak")
Fixes: f7884097141b ("octeontx2-af: Formatting debugfs entry rsrc_alloc.")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ptp_qoriq: fix overflow in ptp_qoriq_adjfine() u64 calcalation

Current calculation for diff of TMR_ADD register value may have
64-bit overflow in this code line, when long type scaled_ppm is
large.

adj *= scaled_ppm;

This patch is to resolve it by using mul_u64_u64_div_u64().

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'clk-fixes-for-linus' of git://git./linux/kernel/git/clk/linux

Pull clk fixes from Stephen Boyd:
"Three fixes for the Qualcomm clk driver: two for regressions this
  merge window and one for a long-standing problem that only popped up
  now that eMMC is being used"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: qcom: gcc-sc7180: Use floor ops for the correct sdcc1 clk
  clk: qcom: rcg2: Rectify clk_gfx3d rate rounding without mux division
  clk: qcom: rpmh: Update the XO clock source for SC7280

Merge tag 'platform-drivers-x86-v5.12-2' of git://git./linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform drivers fixes from Hans de Goede:
"A set of bug-fixes and some model specific quirks.

  Summary:

   - dell-wmi-sysman: A set of probe-error-exit-handling fixes to fix
     some systems which advertise the WMI GUIDs, but are not compatible,
     not booting

   - intel-vbtn/intel-hid: Misc. bugfixes

   - intel_pmc: Bug-fixes + a quirk to lower suspend power-consumption
     on Tiger Lake

   - thinkpad_acpi: misc bugfixes"

* tag 'platform-drivers-x86-v5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86: intel_pmc_core: Ignore GBE LTR on Tiger Lake platforms
  platform/x86: intel_pmc_core: Update Kconfig
  platform/x86: intel_pmt_crashlog: Fix incorrect macros
  platform/x86: intel_pmt_class: Initial resource to 0
  platform/x86: intel-vbtn: Stop reporting SW_DOCK events
  platform/x86: dell-wmi-sysman: Cleanup create_attributes_level_sysfs_files()
  platform/x86: dell-wmi-sysman: Make sysman_init() return -ENODEV of the interfaces are not found
  platform/x86: dell-wmi-sysman: Cleanup sysman_init() error-exit handling
  platform/x86: dell-wmi-sysman: Fix release_attributes_data() getting called twice on init_bios_attributes() failure
  platform/x86: dell-wmi-sysman: Make it safe to call exit_foo_attributes() multiple times
  platform/x86: dell-wmi-sysman: Fix possible NULL pointer deref on exit
  platform/x86: dell-wmi-sysman: Fix crash caused by calling kset_unregister twice
  platform/x86: thinkpad_acpi: Disable DYTC CQL mode around switching to balanced mode
  platform/x86: thinkpad_acpi: Allow the FnLock LED to change state
  platform/x86: thinkpad_acpi: check dytc version for lapmode sysfs
  platform/x86: intel-hid: Support Lenovo ThinkPad X1 Tablet Gen 2

Merge tag 'afs-cachefiles-fixes-20210323' of git://git./linux/kernel/git/dhowells/linux-fs

Pull cachefiles and afs fixes from David Howells:
"Fixes from Matthew Wilcox for page waiting-related issues in
  cachefiles and afs as extracted from his folio series[1]:

   - In cachefiles, remove the use of the wait_bit_key struct to access
     something that's actually in wait_page_key format. The proper
     struct is now available in the header, so that should be used
     instead.

   - Add a proper wait function for waiting killably on the page
     writeback flag. This includes a recent bugfix[2] that's not in the
     afs code.

   - In afs, use the function added in (2) rather than using
     wait_on_page_bit_killable() which doesn't provide the
     aforementioned bugfix"

Link: https://lore.kernel.org/r/20210320054104.1300774-1-willy@infradead.org[1]
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=c2407cf7d22d0c0d94cf20342b3b8f06f1d904e7
Link: https://lore.kernel.org/r/20210323120829.GC1719932@casper.infradead.org/
* tag 'afs-cachefiles-fixes-20210323' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  afs: Use wait_on_page_writeback_killable
  mm/writeback: Add wait_on_page_writeback_killable
  fs/cachefiles: Remove wait_bit_key layout dependency

cachefiles: do not yet allow on idmapped mounts

Based on discussions (e.g. in [1]) my understanding of cachefiles and
the cachefiles userspace daemon is that it creates a cache on a local
filesystem (e.g. ext4, xfs etc.) for a network filesystem. The way this
is done is by writing "bind" to /dev/cachefiles and pointing it to the
directory to use as the cache.

Currently this directory can technically also be an idmapped mount but
cachefiles aren't yet fully aware of such mounts and thus don't take the
idmapping into account when creating cache entries. This could leave
users confused as the ownership of the files wouldn't match to what they
expressed in the idmapping. Block cache files on idmapped mounts until
the fscache rework is done and we have ported it to support idmapped
mounts.

Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/lkml/20210303161528.n3jzg66ou2wa43qb@wittgenstein
Link: https://lore.kernel.org/r/20210316112257.2974212-1-christian.brauner@ubuntu.com/
Link: https://listman.redhat.com/archives/linux-cachefs/2021-March/msg00044.html
Link: https://lore.kernel.org/r/20210319114146.410329-1-christian.brauner@ubuntu.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

net: bridge: don't notify switchdev for local FDB addresses

As explained in this discussion:
https://lore.kernel.org/netdev/20210117193009.io3nungdwuzmo5f7@skbuf/

the switchdev notifiers for FDB entries managed to have a zero-day bug.
The bridge would not say that this entry is local:

ip link add br0 type bridge
ip link set swp0 master br0
bridge fdb add dev swp0 00:01:02:03:04:05 master local

and the switchdev driver would be more than happy to offload it as a
normal static FDB entry. This is despite the fact that 'local' and
non-'local' entries have completely opposite directions: a local entry
is locally terminated and not forwarded, whereas a static entry is
forwarded and not locally terminated. So, for example, DSA would install
this entry on swp0 instead of installing it on the CPU port as it should.

There is an even sadder part, which is that the 'local' flag is implicit
if 'static' is not specified, meaning that this command produces the
same result of adding a 'local' entry:

bridge fdb add dev swp0 00:01:02:03:04:05 master

I've updated the man pages for 'bridge', and after reading it now, it
should be pretty clear to any user that the commands above were broken
and should have never resulted in the 00:01:02:03:04:05 address being
forwarded (this behavior is coherent with non-switchdev interfaces):
https://patchwork.kernel.org/project/netdevbpf/cover/20210211104502.2081443-1-olteanv@gmail.com/
If you're a user reading this and this is what you want, just use:

bridge fdb add dev swp0 00:01:02:03:04:05 master static

Because switchdev should have given drivers the means from day one to
classify FDB entries as local/non-local, but didn't, it means that all
drivers are currently broken. So we can just as well omit the switchdev
notifications for local FDB entries, which is exactly what this patch
does to close the bug in stable trees. For further development work
where drivers might want to trap the local FDB entries to the host, we
can add a 'bool is_local' to br_switchdev_fdb_call_notifiers(), and
selectively make drivers act upon that bit, while all the others ignore
those entries if the 'is_local' bit is set.

Fixes: 6b26b51b1d13 ("net: bridge: Add support for notifying devices about FDB add/del")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/sched: act_ct: clear post_ct if doing ct_clear

Invalid detection works with two distinct moments: act_ct tries to find
a conntrack entry and set post_ct true, indicating that that was
attempted. Then, when flow dissector tries to dissect CT info and no
entry is there, it knows that it was tried and no entry was found, and
synthesizes/sets
key->ct_state = TCA_FLOWER_KEY_CT_FLAGS_TRACKED |
TCA_FLOWER_KEY_CT_FLAGS_INVALID;
mimicing what OVS does.

OVS has this a bit more streamlined, as it recomputes the key after
trying to find a conntrack entry for it.

Issue here is, when we have 'tc action ct clear', it didn't clear
post_ct, causing a subsequent match on 'ct_state -trk' to fail, due to
the above. The fix, thus, is to clear it.

Reproducer rules:
tc filter add dev enp130s0f0np0_0 ingress prio 1 chain 0 \
protocol ip flower ip_proto tcp ct_state -trk \
action ct zone 1 pipe \
action goto chain 2
tc filter add dev enp130s0f0np0_0 ingress prio 1 chain 2 \
protocol ip flower \
action ct clear pipe \
action goto chain 4
tc filter add dev enp130s0f0np0_0 ingress prio 1 chain 4 \
protocol ip flower ct_state -trk \
action mirred egress redirect dev enp130s0f1np1_0

With the fix, the 3rd rule matches, like it does with OVS kernel
datapath.

Fixes: 7baf2429a1a9 ("net/sched: cls_flower add CT_FLAGS_INVALID flag support")
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

afs: Use wait_on_page_writeback_killable

Open-coding this function meant it missed out on the recent bugfix
for waiters being woken by a delayed wake event from a previous
instantiation of the page[1].

[DH: Changed the patch to use vmf->page rather than variable page which
doesn't exist yet upstream]

Fixes: 1cf7a1518aef ("afs: Implement shared-writeable mmap")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: kafs-testing@auristor.com
cc: linux-afs@lists.infradead.org
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20210320054104.1300774-4-willy@infradead.org
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=c2407cf7d22d0c0d94cf20342b3b8f06f1d904e7

mm/writeback: Add wait_on_page_writeback_killable

This is the killable version of wait_on_page_writeback.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: kafs-testing@auristor.com
cc: linux-afs@lists.infradead.org
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20210320054104.1300774-3-willy@infradead.org

fs/cachefiles: Remove wait_bit_key layout dependency

Cachefiles was relying on wait_page_key and wait_bit_key being the
same layout, which is fragile. Now that wait_page_key is exposed in
the pagemap.h header, we can remove that fragility

A comment on the need to maintain structure layout equivalence was added by
Linus[1] and that is no longer applicable.

Fixes: 62906027091f ("mm: add PageWaiters indicating tasks are waiting for a page bit")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: kafs-testing@auristor.com
cc: linux-cachefs@redhat.com
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20210320054104.1300774-2-willy@infradead.org/
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=3510ca20ece0150af6b10c77a74ff1b5c198e3e2

platform/x86: intel_pmc_core: Ignore GBE LTR on Tiger Lake platforms

Due to a HW limitation, the Latency Tolerance Reporting (LTR) value
programmed in the Tiger Lake GBE controller is not large enough to allow
the platform to enter Package C10, which in turn prevents the platform from
achieving its low power target during suspend-to-idle. Ignore the GBE LTR
value on Tiger Lake. LTR ignore functionality is currently performed solely
by a debugfs write call. Split out the LTR code into its own function that
can be called by both the debugfs writer and by this work around.

Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Sasha Neftin <sasha.neftin@intel.com>
Cc: intel-wired-lan@lists.osuosl.org
Reviewed-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>
Link: https://lore.kernel.org/r/20210319201844.3305399-2-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: intel_pmc_core: Update Kconfig

The intel_pmc_core driver is mostly used as a debugging driver for Intel
platforms that support SLPS0 (S0ix). But the driver may also be used to
communicate actions to the PMC in order to ensure transition to SLPS0 on
some systems and architectures. As such the driver should be built on all
platforms it supports. Indicate this in the Kconfig. Also update the list
of supported features.

Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Suggested-by: Mario Limonciello <mario.limonciello@dell.com>
Link: https://lore.kernel.org/r/20210319201844.3305399-1-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: intel_pmt_crashlog: Fix incorrect macros

Fixes off-by-one bugs in the macro assignments for the crashlog control
bits. Was initially tested on emulation but bug revealed after testing on
silicon.

Fixes: 5ef9998c96b0 ("platform/x86: Intel PMT Crashlog capability driver")
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20210317024455.3071477-2-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: intel_pmt_class: Initial resource to 0

Initialize the struct resource in intel_pmt_dev_register to zero to avoid a
fault should the char *name field be non-zero.

Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20210317024455.3071477-1-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Merge tag 'linux-kselftest-kunit-fixes-5.12-rc5.1' of git://git./linux/kernel/git/shuah/linux-kselftest

Pull KUnit fixes from Shuah Khan:
"Two fixes to the kunit tool from David Gow"

* tag 'linux-kselftest-kunit-fixes-5.12-rc5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: tool: Disable PAGE_POISONING under --alltests
kunit: tool: Fix a python tuple typing error

mfd: intel_quark_i2c_gpio: Revert "Constify static struct resources"

The structures are used as place holders, so they are modified at run-time.
Obviously they may not be constants.

  BUG: unable to handle page fault for address: d0643220
  ...
  CPU: 0 PID: 110 Comm: modprobe Not tainted 5.11.0+ #1
  Hardware name: Intel Corp. QUARK/GalileoGen2, BIOS 0x01000200 01/01/2014
  EIP: intel_quark_mfd_probe+0x93/0x1c0 [intel_quark_i2c_gpio]

This partially reverts the commit c4a164f41554d2899bed94bdcc499263f41787b4.

While at it, add a comment to avoid similar changes in the future.

Fixes: c4a164f41554 ("mfd: Constify static struct resources")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Tested-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

net: dsa: don't assign an error value to tag_ops

Use a temporary variable to hold the return value from
dsa_tag_driver_get() instead of assigning it to dst->tag_ops. Leaving
an error value in dst->tag_ops can result in deferencing an invalid
pointer when a deferred switch configuration happens later.

Fixes: 357f203bb3b5 ("net: dsa: keep a copy of the tagging protocol in the DSA switch tree")

Signed-off-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'mlx5-fixes-2021-03-22' of git://git./linux/kernel/git/saeed/linux

Saeed Mahameed says:

====================
mlx5 fixes 2021-03-22

This series introduces some fixes to mlx5 driver.
Please pull and let me know if there is any problem.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

isdn: capi: fix mismatched prototypes

gcc-11 complains about a prototype declaration that is different
from the function definition:

drivers/isdn/capi/kcapi.c:724:44: error: argument 2 of type ‘u8 *’ {aka ‘unsigned char *’} declared as a pointer [-Werror=array-parameter=]
  724 | u16 capi20_get_manufacturer(u32 contr, u8 *buf)
      |                                        ~~~~^~~
In file included from drivers/isdn/capi/kcapi.c:13:
drivers/isdn/capi/kcapi.h:62:43: note: previously declared as an array ‘u8[64]’ {aka ‘unsigned char[64]’}
   62 | u16 capi20_get_manufacturer(u32 contr, u8 buf[CAPI_MANUFACTURER_LEN]);
      |                                        ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/isdn/capi/kcapi.c:790:38: error: argument 2 of type ‘u8 *’ {aka ‘unsigned char *’} declared as a pointer [-Werror=array-parameter=]
  790 | u16 capi20_get_serial(u32 contr, u8 *serial)
      |                                  ~~~~^~~~~~
In file included from drivers/isdn/capi/kcapi.c:13:
drivers/isdn/capi/kcapi.h:64:37: note: previously declared as an array ‘u8[8]’ {aka ‘unsigned char[8]’}
   64 | u16 capi20_get_serial(u32 contr, u8 serial[CAPI_SERIAL_LEN]);
      |                                  ~~~^~~~~~~~~~~~~~~~~~~~~~~

Change the definition to make them match.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/mlx5: SF, do not use ecpu bit for vhca state processing

Device firmware doesn't handle ecpu bit for vhca state processing
events and commands. Instead device firmware refers to the unique
function id to distinguish SF of different PCI functions.

When ecpu bit is used, firmware returns a syndrome.

mlx5_cmd_check:780:(pid 872): MODIFY_VHCA_STATE(0xb0e) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x263211)
mlx5_sf_dev_table_create:248:(pid 872): SF DEV table create err = -22

Hence, avoid using ecpu bit.

Fixes: 8f0105418668 ("net/mlx5: SF, Add port add delete functionality")
Fixes: 90d010b8634b ("net/mlx5: SF, Add auxiliary device support")
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Vu Pham <vuhuong@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: Fix division by 0 in mlx5e_select_queue

mlx5e_select_queue compares num_tc_x_num_ch to real_num_tx_queues to
determine if HTB and/or PTP offloads are active. If they are, it
calculates netdev_pick_tx() % num_tc_x_num_ch to prevent it from
selecting HTB and PTP queues for regular traffic. However, before the
channels are first activated, num_tc_x_num_ch is zero. If
ndo_select_queue gets called at this point, the HTB/PTP check will pass,
and mlx5e_select_queue will attempt to take a modulo by num_tc_x_num_ch,
which equals to zero.

This commit fixes the bug by assigning num_tc_x_num_ch to a non-zero
value before registering the netdev.

Fixes: 214baf22870c ("net/mlx5e: Support HTB offload")
Reported-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: Fix error path for ethtool set-priv-flag

Expose error value when failing to comply to command:
$ ethtool --set-priv-flags eth2 rx_cqe_compress [on/off]

Fixes: be7e87f92b58 ("net/mlx5e: Fail safe cqe compressing/moderation mode setting")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: Offload tuple rewrite for non-CT flows

Setting connection tracking OVS flows and then setting non-CT flows that
use tuple rewrite action (e.g. mod_tp_dst), causes the latter flows not
being offloaded.

Fix by using a stricter condition in modify_header_match_supported() to
check tuple rewrite support only for flows with CT action. The check is
factored out into standalone modify_tuple_supported() function to aid
readability.

Fixes: 7e36feeb0467 ("net/mlx5e: CT: Don't offload tuple rewrites for established tuples")
Signed-off-by: Dima Chumak <dchumak@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: Allow to match on MPLS parameters only for MPLS over UDP

Currently, we support hardware offload only for MPLS over UDP.
However, rules matching on MPLS parameters are now wrongly offloaded
for regular MPLS, without actually taking the parameters into
consideration when doing the offload.
Fix it by rejecting such unsupported rules.

Fixes: 72046a91d134 ("net/mlx5e: Allow to match on mpls parameters")
Signed-off-by: Alaa Hleihel <alaa@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: Add back multicast stats for uplink representor

The multicast counter got removed from uplink representor due to the
cited patch.

Fixes: 47c97e6b10a1 ("net/mlx5e: Fix multicast counter not up-to-date in "ip -s"")
Signed-off-by: Huy Nguyen <huyn@nvidia.com>
Reviewed-by: Daniel Jurgens <danielj@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net: ipconfig: ic_dev can be NULL in ic_close_devs

ic_close_dev contains a generalization of the logic to not close a
network interface if it's the host port for a DSA switch. This logic is
disguised behind an iteration through the lowers of ic_dev in
ic_close_dev.

When no interface for ipconfig can be found, ic_dev is NULL, and
ic_close_dev:
- dereferences a NULL pointer when assigning selected_dev
- would attempt to search through the lower interfaces of a NULL
net_device pointer

So we should protect against that case.

The "lower_dev" iterator variable was shortened to "lower" in order to
keep the 80 character limit.

Fixes: f68cbaed67cb ("net: ipconfig: avoid use-after-free in ic_close_devs")
Fixes: 46acf7bdbc72 ("Revert "net: ipv4: handle DSA enabled master network devices"")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

MAINTAINERS: Combine "QLOGIC QLGE 10Gb ETHERNET DRIVER" sections into one

There ended up being two sections with the same title. Combine the two
into one section.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Cc: Manish Chopra <manishc@marvell.com>
Cc: Coiby Xu <coiby.xu@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'selinux-pr-20210322' of git://git./linux/kernel/git/pcmoore/selinux

Pull selinux fixes from Paul Moore:
"Three SELinux patches:

   - Fix a problem where a local variable is used outside its associated
     function. Thankfully this can only be triggered by reloading the
     SELinux policy, which is a restricted operation for other obvious
     reasons.

   - Fix some incorrect, and inconsistent, audit and printk messages
     when loading the SELinux policy.

  All three patches are relatively minor and have been through our
  testing with no failures"

* tag 'selinux-pr-20210322' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinuxfs: unify policy load error reporting
  selinux: fix variable scope issue in live sidtab conversion
  selinux: don't log MAC_POLICY_LOAD record on failed policy load

kselftest/arm64: sve: Do not use non-canonical FFR register value

The "First Fault Register" (FFR) is an SVE register that mimics a
predicate register, but clears bits when a load or store fails to handle
an element of a vector. The supposed usage scenario is to initialise
this register (using SETFFR), then *read* it later on to learn about
elements that failed to load or store. Explicit writes to this register
using the WRFFR instruction are only supposed to *restore* values
previously read from the register (for context-switching only).
As the manual describes, this register holds only certain values, it:
"... contains a monotonic predicate value, in which starting from bit 0
there are zero or more 1 bits, followed only by 0 bits in any remaining
bit positions."
Any other value is UNPREDICTABLE and is not supposed to be "restored"
into the register.

The SVE test currently tries to write a signature pattern into the
register, which is *not* a canonical FFR value. Apparently the existing
setups treat UNPREDICTABLE as "read-as-written", but a new
implementation actually only stores canonical values. As a consequence,
the sve-test fails immediately when comparing the FFR value:
-----------
# ./sve-test
Vector length:  128 bits
PID:    207
Mismatch: PID=207, iteration=0, reg=48
        Expected [cf00]
        Got      [0f00]
Aborted
-----------

Fix this by only populating the FFR with proper canonical values.
Effectively the requirement described above limits us to 17 unique
values over 16 bits worth of FFR, so we condense our signature down to 4
bits (2 bits from the PID, 2 bits from the generation) and generate the
canonical pattern from it. Any bits describing elements above the
minimum 128 bit are set to 0.

This aligns the FFR usage to the architecture and fixes the test on
microarchitectures implementing FFR in a more restricted way.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviwed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210319120128.29452-1-andre.przywara@arm.com
Signed-off-by: Will Deacon <will@kernel.org>

arm64: mm: correct the inside linear map range during hotplug check

Memory hotplug may fail on systems with CONFIG_RANDOMIZE_BASE because the
linear map range is not checked correctly.

The start physical address that linear map covers can be actually at the
end of the range because of randomization. Check that and if so reduce it
to 0.

This can be verified on QEMU with setting kaslr-seed to ~0ul:

memstart_offset_seed = 0xffff
START: __pa(_PAGE_OFFSET(vabits_actual)) = ffff9000c0000000
END: __pa(PAGE_END - 1) = 1000bfffffff

Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Fixes: 58284a901b42 ("arm64/mm: Validate hotplug range before creating linear mapping")
Tested-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20210216150351.129018-2-pasha.tatashin@soleen.com
Signed-off-by: Will Deacon <will@kernel.org>

arm64: kdump: update ppos when reading elfcorehdr

The ppos points to a position in the old kernel memory (and in case of
arm64 in the crash kernel since elfcorehdr is passed as a segment). The
function should update the ppos by the amount that was read. This bug is
not exposed by accident, but other platforms update this value properly.
So, fix it in ARM64 version of elfcorehdr_read() as well.

Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Fixes: e62aaeac426a ("arm64: kdump: provide /proc/vmcore file")
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Link: https://lore.kernel.org/r/20210319205054.743368-1-pasha.tatashin@soleen.com
Signed-off-by: Will Deacon <will@kernel.org>

arm64: cpuinfo: Fix a typo

s/acurate/accurate/

Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20210319222848.29928-1-unixbhaskar@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>

Documentation: arm64/acpi : clarify arm64 support of IBFT

In commit 94bccc340710 ("iscsi_ibft: make ISCSI_IBFT dependson ACPI instead
of ISCSI_IBFT_FIND") Kconfig was disentangled to make ISCSI_IBFT selection
not depend on x86.

Update arm64 acpi documentation, changing IBFT support status from
"Not Supported" to "Optional".
Opportunistically re-flow paragraph for changed lines.

Link: https://lore.kernel.org/lkml/1563475054-10680-1-git-send-email-thomas.tai@oracle.com/
Signed-off-by: Tom Saeger <tom.saeger@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Link: https://lore.kernel.org/r/9efc652df2b8d6b53d9acb170eb7c9ca3938dfef.1615920441.git.tom.saeger@oracle.com
Signed-off-by: Will Deacon <will@kernel.org>

arm64: stacktrace: don't trace arch_stack_walk()

We recently converted arm64 to use arch_stack_walk() in commit:

5fc57df2f6fd ("arm64: stacktrace: Convert to ARCH_STACKWALK")

The core stacktrace code expects that (when tracing the current task)
arch_stack_walk() starts a trace at its caller, and does not include
itself in the trace. However, arm64's arch_stack_walk() includes itself,
and so traces include one more entry than callers expect. The core
stacktrace code which calls arch_stack_walk() tries to skip a number of
entries to prevent itself appearing in a trace, and the additional entry
prevents skipping one of the core stacktrace functions, leaving this in
the trace unexpectedly.

We can fix this by having arm64's arch_stack_walk() begin the trace with
its caller. The first value returned by the trace will be
__builtin_return_address(0), i.e. the caller of arch_stack_walk(). The
first frame record to be unwound will be __builtin_frame_address(1),
i.e. the caller's frame record. To prevent surprises, arch_stack_walk()
is also marked noinline.

While __builtin_frame_address(1) is not safe in portable code, local GCC
developers have confirmed that it is safe on arm64. To find the caller's
frame record, the builtin can safely dereference the current function's
frame record or (in theory) could stash the original FP into another GPR
at function entry time, neither of which are problematic.

Prior to this patch, the tracing code would unexpectedly show up in
traces of the current task, e.g.

| # cat /proc/self/stack
| [<0>] stack_trace_save_tsk+0x98/0x100
| [<0>] proc_pid_stack+0xb4/0x130
| [<0>] proc_single_show+0x60/0x110
| [<0>] seq_read_iter+0x230/0x4d0
| [<0>] seq_read+0xdc/0x130
| [<0>] vfs_read+0xac/0x1e0
| [<0>] ksys_read+0x6c/0xfc
| [<0>] __arm64_sys_read+0x20/0x30
| [<0>] el0_svc_common.constprop.0+0x60/0x120
| [<0>] do_el0_svc+0x24/0x90
| [<0>] el0_svc+0x2c/0x54
| [<0>] el0_sync_handler+0x1a4/0x1b0
| [<0>] el0_sync+0x170/0x180

After this patch, the tracing code will not show up in such traces:

| # cat /proc/self/stack
| [<0>] proc_pid_stack+0xb4/0x130
| [<0>] proc_single_show+0x60/0x110
| [<0>] seq_read_iter+0x230/0x4d0
| [<0>] seq_read+0xdc/0x130
| [<0>] vfs_read+0xac/0x1e0
| [<0>] ksys_read+0x6c/0xfc
| [<0>] __arm64_sys_read+0x20/0x30
| [<0>] el0_svc_common.constprop.0+0x60/0x120
| [<0>] do_el0_svc+0x24/0x90
| [<0>] el0_svc+0x2c/0x54
| [<0>] el0_sync_handler+0x1a4/0x1b0
| [<0>] el0_sync+0x170/0x180

Erring on the side of caution, I've given this a spin with a bunch of
toolchains, verifying the output of /proc/self/stack and checking that
the assembly looked sound. For GCC (where we require version 5.1.0 or
later) I tested with the kernel.org crosstool binares for versions
5.5.0, 6.4.0, 6.5.0, 7.3.0, 7.5.0, 8.1.0, 8.3.0, 8.4.0, 9.2.0, and
10.1.0. For clang (where we require version 10.0.1 or later) I tested
with the llvm.org binary releases of 11.0.0, and 11.0.1.

Fixes: 5fc57df2f6fd ("arm64: stacktrace: Convert to ARCH_STACKWALK")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Jun <chenjun102@huawei.com>
Cc: Marco Elver <elver@google.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org> # 5.10.x
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210319184106.5688-1-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>

RDMA/hns: Fix bug during CMDQ initialization

When reloading driver, the head/tail pointer of CMDQ may be not at
position 0. Then during initialization of CMDQ, if head is reset first,
the firmware will start to handle CMDQ because the head is not equal to
the tail. The driver can reset tail first since the firmware will be
triggerred only by head. This bug is introduced by changing macros of
head/tail register without changing the order of initialization.

Fixes: 292b3352bd5b ("RDMA/hns: Adjust fields and variables about CMDQ tail/head")
Link: https://lore.kernel.org/r/1615602611-7963-1-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

Linux 5.12-rc4

Merge tag 'ext4_for_linus_stable' of git://git./linux/kernel/git/tytso/ext4

Pull ext4 fixes from Ted Ts'o:
"Miscellaneous ext4 bug fixes for v5.12"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: initialize ret to suppress smatch warning
  ext4: stop inode update before return
  ext4: fix rename whiteout with fast commit
  ext4: fix timer use-after-free on failed mount
  ext4: fix potential error in ext4_do_update_inode
  ext4: do not try to set xattr into ea_inode if value is empty
  ext4: do not iput inode under running transaction in ext4_rename()
  ext4: find old entry again if failed to rename whiteout
  ext4: fix error handling in ext4_end_enable_verity()
  ext4: fix bh ref count on error paths
  fs/ext4: fix integer overflow in s_log_groups_per_flex
  ext4: add reclaim checks to xattr code
  ext4: shrink race window in ext4_should_retry_alloc()

Merge tag 'io_uring-5.12-2021-03-21' of git://git.kernel.dk/linux-block

Pull io_uring followup fixes from Jens Axboe:

- The SIGSTOP change from Eric, so we properly ignore that for
   PF_IO_WORKER threads.

- Disallow sending signals to PF_IO_WORKER threads in general, we're
   not interested in having them funnel back to the io_uring owning
   task.

- Stable fix from Stefan, ensuring we properly break links for short
   send/sendmsg recv/recvmsg if MSG_WAITALL is set.

- Catch and loop when needing to run task_work before a PF_IO_WORKER
   threads goes to sleep.

* tag 'io_uring-5.12-2021-03-21' of git://git.kernel.dk/linux-block:
  io_uring: call req_set_fail_links() on short send[msg]()/recv[msg]() with MSG_WAITALL
  io-wq: ensure task is running before processing task_work
  signal: don't allow STOP on PF_IO_WORKER threads
  signal: don't allow sending any signals to PF_IO_WORKER threads

Merge tag 'staging-5.12-rc4' of git://git./linux/kernel/git/gregkh/staging

Pull staging and IIO driver fixes from Greg KH:
"Some small staging and IIO driver fixes:

   - MAINTAINERS changes for the move of the staging mailing list

   - comedi driver fixes to get request_irq() to work correctly

   - counter driver fixes for reported issues with iio devices

   - tiny iio driver fixes for reported issues.

  All of these have been in linux-next with no reported problems"

* tag 'staging-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: vt665x: fix alignment constraints
  staging: comedi: cb_pcidas64: fix request_irq() warn
  staging: comedi: cb_pcidas: fix request_irq() warn
  MAINTAINERS: move the staging subsystem to lists.linux.dev
  MAINTAINERS: move some real subsystems off of the staging mailing list
  iio: gyro: mpu3050: Fix error handling in mpu3050_trigger_handler
  iio: hid-sensor-temperature: Fix issues of timestamp channel
  iio: hid-sensor-humidity: Fix alignment issue of timestamp channel
  counter: stm32-timer-cnt: fix ceiling miss-alignment with reload register
  counter: stm32-timer-cnt: fix ceiling write max value
  counter: stm32-timer-cnt: Report count function when SLAVE_MODE_DISABLED
  iio: adc: ab8500-gpadc: Fix off by 10 to 3
  iio:adc:stm32-adc: Add HAS_IOMEM dependency
  iio: adis16400: Fix an error code in adis16400_initial_setup()
  iio: adc: adi-axi-adc: add proper Kconfig dependencies
  iio: adc: ad7949: fix wrong ADC result due to incorrect bit mask
  iio: hid-sensor-prox: Fix scale not correct issue
  iio:adc:qcom-spmi-vadc: add default scale to LR_MUX2_BAT_ID channel

Merge tag 'usb-5.12-rc4' of git://git./linux/kernel/git/gregkh/usb

Pull USB and Thunderbolt driver fixes from Greg KH:
"Here are some small Thunderbolt and USB driver fixes for some reported
  issues:

   - thunderbolt fixes for minor problems

   - typec fixes for power issues

   - usb-storage quirk addition

   - usbip bugfix

   - dwc3 bugfix when stopping transfers

   - cdnsp bugfix for isoc transfers

   - gadget use-after-free fix

  All have been in linux-next this week with no reported issues"

* tag 'usb-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: typec: tcpm: Skip sink_cap query only when VDM sm is busy
  usb: dwc3: gadget: Prevent EP queuing while stopping transfers
  usb: typec: tcpm: Invoke power_supply_changed for tcpm-source-psy-
  usb: typec: Remove vdo[3] part of tps6598x_rx_identity_reg struct
  usb-storage: Add quirk to defeat Kindle's automatic unload
  usb: gadget: configfs: Fix KASAN use-after-free
  usbip: Fix incorrect double assignment to udc->ud.tcp_rx
  usb: cdnsp: Fixes incorrect value in ISOC TRB
  thunderbolt: Increase runtime PM reference count on DP tunnel discovery
  thunderbolt: Initialize HopID IDAs in tb_switch_alloc()

Merge tag 'irq-urgent-2021-03-21' of git://git./linux/kernel/git/tip/tip

Pull irq fix from Ingo Molnar:
"A change to robustify force-threaded IRQ handlers to always disable
  interrupts, plus a DocBook fix.

  The force-threaded IRQ handler change has been accelerated from the
  normal schedule of such a change to keep the bad pattern/workaround of
  spin_lock_irqsave() in handlers or IRQF_NOTHREAD as a kludge from
  spreading"

* tag 'irq-urgent-2021-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Disable interrupts for force threaded handlers
  genirq/irq_sim: Fix typos in kernel doc (fnode -> fwnode)

Merge tag 'perf-urgent-2021-03-21' of git://git./linux/kernel/git/tip/tip

Pull perf fixes from Ingo Molnar:
"Boundary condition fixes for bugs unearthed by the perf fuzzer"

* tag 'perf-urgent-2021-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Fix unchecked MSR access error caused by VLBR_EVENT
perf/x86/intel: Fix a crash caused by zero PEBS status

Merge tag 'locking-urgent-2021-03-21' of git://git./linux/kernel/git/tip/tip

Pull locking fixes from Ingo Molnar:

- Get static calls & modules right. Hopefully.

- WW mutex fixes

* tag 'locking-urgent-2021-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  static_call: Fix static_call_update() sanity check
  static_call: Align static_call_is_init() patching condition
  static_call: Fix static_call_set_init()
  locking/ww_mutex: Fix acquire/release imbalance in ww_acquire_init()/ww_acquire_fini()
  locking/ww_mutex: Simplify use_ww_ctx & ww_ctx handling

Merge tag 'efi-urgent-2021-03-21' of git://git./linux/kernel/git/tip/tip

Pull EFI fixes from Ingo Molnar:

- another missing RT_PROP table related fix, to ensure that the
   efivarfs pseudo filesystem fails gracefully if variable services
   are unsupported

- use the correct alignment for literal EFI GUIDs

- fix a use after unmap issue in the memreserve code

* tag 'efi-urgent-2021-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi: use 32-bit alignment for efi_guid_t literals
  firmware/efi: Fix a use after bug in efi_mem_reserve_persistent
  efivars: respect EFI_UNSUPPORTED return from firmware

Merge tag 'x86_urgent_for_v5.12-rc4' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Borislav Petkov:
"The freshest pile of shiny x86 fixes for 5.12:

   - Add the arch-specific mapping between physical and logical CPUs to
     fix devicetree-node lookups

   - Restore the IRQ2 ignore logic

   - Fix get_nr_restart_syscall() to return the correct restart syscall
     number. Split in a 4-patches set to avoid kABI breakage when
     backporting to dead kernels"

* tag 'x86_urgent_for_v5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/apic/of: Fix CPU devicetree-node lookups
  x86/ioapic: Ignore IRQ2 again
  x86: Introduce restart_block->arch_data to remove TS_COMPAT_RESTART
  x86: Introduce TS_COMPAT_RESTART to fix get_nr_restart_syscall()
  x86: Move TS_COMPAT back to asm/thread_info.h
  kernel, fs: Introduce and use set_restart_fn() and arch_set_restart_data()

Merge tag 'powerpc-5.12-4' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:

- Fix a possible stack corruption and subsequent DLPAR failure in the
   rpadlpar_io PCI hotplug driver

- Two build fixes for uncommon configurations

Thanks to Christophe Leroy and Tyrel Datwyler.

* tag 'powerpc-5.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  PCI: rpadlpar: Fix potential drc_name corruption in store functions
  powerpc: Force inlining of cpu_has_feature() to avoid build failure
  powerpc/vdso32: Add missing _restgpr_31_x to fix build failure

platform/x86: intel-vbtn: Stop reporting SW_DOCK events

Stop reporting SW_DOCK events because this breaks suspend-on-lid-close.

SW_DOCK should only be reported for docking stations, but all the DSDTs in
my DSDT collection which use the intel-vbtn code, always seem to use this
for 2-in-1s / convertibles and set SW_DOCK=1 when in laptop-mode (in tandem
with setting SW_TABLET_MODE=0).

This causes userspace to think the laptop is docked to a port-replicator
and to disable suspend-on-lid-close, which is undesirable.

Map the dock events to KEY_IGNORE to avoid this broken SW_DOCK reporting.

Note this may theoretically cause us to stop reporting SW_DOCK on some
device where the 0xCA and 0xCB intel-vbtn events are actually used for
reporting docking to a classic docking-station / port-replicator but
I'm not aware of any such devices.

Also the most important thing is that we only report SW_DOCK when it
reliably reports being docked to a classic docking-station without any
false positives, which clearly is not the case here. If there is a
chance of reporting false positives then it is better to not report
SW_DOCK at all.

Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210321163513.72328-1-hdegoede@redhat.com

platform/x86: dell-wmi-sysman: Cleanup create_attributes_level_sysfs_files()

Cleanup create_attributes_level_sysfs_files():

1. There is no need to call sysfs_remove_file() on error, sysman_init()
will already call release_attributes_data() on failure which already does
this.

2. There is no need for the pr_debug() calls sysfs_create_file() should
never fail and if it does it will already complain about the problem
itself.

Fixes: e8a60aa7404b ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Cc: Divya Bharathi <Divya_Bharathi@dell.com>
Cc: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210321115901.35072-8-hdegoede@redhat.com

platform/x86: dell-wmi-sysman: Make sysman_init() return -ENODEV of the interfaces are not found

When either the attributes or the password interface is not found, then
unregister the 2 wmi drivers again and return -ENODEV from sysman_init().

Fixes: e8a60aa7404b ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Cc: Divya Bharathi <Divya_Bharathi@dell.com>
Cc: Mario Limonciello <mario.limonciello@dell.com>
Reported-by: Alexander Naumann <alexandernaumann@gmx.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210321115901.35072-7-hdegoede@redhat.com

platform/x86: dell-wmi-sysman: Cleanup sysman_init() error-exit handling

Cleanup sysman_init() error-exit handling:

1. There is no need for the fail_reset_bios and fail_authentication_kset
   eror-exit cases, these can be handled by release_attributes_data()

2. Rename all the labels from fail_what_failed, to err_what_to_cleanup
   this is the usual way to name these and avoids the need to rename
   them when extra steps are added.

Fixes: e8a60aa7404b ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Cc: Divya Bharathi <Divya_Bharathi@dell.com>
Cc: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210321115901.35072-6-hdegoede@redhat.com

platform/x86: dell-wmi-sysman: Fix release_attributes_data() getting called twice on init_bios_attributes() failure

All calls of init_bios_attributes() will result in a
goto fail_create_group if they fail, which calls
release_attributes_data().

So there is no need to call release_attributes_data() from
init_bios_attributes() on failure itself.

Fixes: e8a60aa7404b ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Cc: Divya Bharathi <Divya_Bharathi@dell.com>
Cc: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210321115901.35072-5-hdegoede@redhat.com

platform/x86: dell-wmi-sysman: Make it safe to call exit_foo_attributes() multiple times

During some of the error-exit paths it is possible that
release_attributes_data() will get called multiple times,
which results in exit_foo_attributes() getting called multiple
times.

Make it safe to call exit_foo_attributes() multiple times,
avoiding double-free()s in this case.

Note that release_attributes_data() really should only be called
once during error-exit paths. This will be fixed in a separate patch
and it is good to have the exit_foo_attributes() functions modified
this way regardless.

Fixes: e8a60aa7404b ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Cc: Divya Bharathi <Divya_Bharathi@dell.com>
Cc: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210321115901.35072-4-hdegoede@redhat.com

platform/x86: dell-wmi-sysman: Fix possible NULL pointer deref on exit

It is possible for release_attributes_data() to get called when the
main_dir_kset has not been created yet, move the removal of the bios-reset
sysfs attr to under a if (main_dir_kset) check to avoid a NULL pointer
deref.

Fixes: e8a60aa7404b ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Cc: Divya Bharathi <Divya_Bharathi@dell.com>
Cc: Mario Limonciello <mario.limonciello@dell.com>
Reported-by: Alexander Naumann <alexandernaumann@gmx.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210321115901.35072-3-hdegoede@redhat.com

platform/x86: dell-wmi-sysman: Fix crash caused by calling kset_unregister twice

On some system the WMI GUIDs used by dell-wmi-sysman are present but there
are no enum type attributes, this causes init_bios_attributes() to return
-ENODEV, after which sysman_init() does a "goto fail_create_group" and then
calls release_attributes_data().

release_attributes_data() calls kset_unregister(wmi_priv.main_dir_kset);
but before this commit it was missing a "wmi_priv.main_dir_kset = NULL;"
statement; and after calling release_attributes_data() the sysman_init()
error handling does this:

        if (wmi_priv.main_dir_kset) {
                kset_unregister(wmi_priv.main_dir_kset);
                wmi_priv.main_dir_kset = NULL;
        }

Which causes a second kset_unregister(wmi_priv.main_dir_kset), leading to
a double-free, which causes a crash.

Add the missing "wmi_priv.main_dir_kset = NULL;" statement to
release_attributes_data() to fix this double-free crash.

Fixes: e8a60aa7404b ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Cc: Divya Bharathi <Divya_Bharathi@dell.com>
Cc: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210321115901.35072-2-hdegoede@redhat.com

platform/x86: thinkpad_acpi: Disable DYTC CQL mode around switching to balanced mode

Testing has shown that setting /sys/firmware/acpi/platform_profile to
"balanced" when /sys/bus/platform/devices/thinkpad_acpi/dytc_lapmode
reports 1, causes dytc_lapmode to get reset to 0 and then it becomes
stuck at 0 for aprox. 30 minutes even if the laptop is used on a lap.

Disabling CQL (when enabled) before issuing the DYTC_CMD_RESET to get
back to balanced mode and re-enabling it afterwards again, like the
code already does when switching to low-power / performance mode fixes
this.

Fixes: c3bfcd4c6762 ("platform/x86: thinkpad_acpi: Add platform profile support")
Tested-by: Mark Pearson <markpearson@lenovo.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210321113108.7069-1-hdegoede@redhat.com

platform/x86: thinkpad_acpi: Allow the FnLock LED to change state

On many recent ThinkPad laptops, there's a new LED next to the ESC key,
that indicates the FnLock status.
When the Fn+ESC combo is pressed, FnLock is toggled, which causes the
Media Key functionality to change, making it so that the media keys
either perform their media key function, or function as an F-key by
default. The Fn key can be used the access the alternate function at any
time.

With the current linux kernel, the LED doens't change state if you press
the Fn+ESC key combo. However, the media key functionality *does*
change. This is annoying, since the LED will stay on if it was on during
bootup, and it makes it hard to keep track what the current state of the
FnLock is.

This patch calls an ACPI function, that gets the current media key
state, when the Fn+ESC key combo is pressed. Through testing it was
discovered that this function causes the LED to update correctly to
reflect the current state when this function is called.

The relevant ACPI calls are the following:
\_SB_.PCI0.LPC0.EC0_.HKEY.GMKS: Get media key state, returns 0x603 if the FnLock mode is enabled, and 0x602 if it's disabled.
\_SB_.PCI0.LPC0.EC0_.HKEY.SMKS: Set media key state, sending a 1 will enable FnLock mode, and a 0 will disable it.

Relevant discussion:
https://bugzilla.kernel.org/show_bug.cgi?id=207841
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1881015

Signed-off-by: Esteve Varela Colominas <esteve.varela@gmail.com>
Link: https://lore.kernel.org/r/20210315195823.23212-1-esteve.varela@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

io_uring: call req_set_fail_links() on short send[msg]()/recv[msg]() with MSG_WAITALL

Without that it's not safe to use them in a linked combination with
others.

Now combinations like IORING_OP_SENDMSG followed by IORING_OP_SPLICE
should be possible.

We already handle short reads and writes for the following opcodes:

- IORING_OP_READV
- IORING_OP_READ_FIXED
- IORING_OP_READ
- IORING_OP_WRITEV
- IORING_OP_WRITE_FIXED
- IORING_OP_WRITE
- IORING_OP_SPLICE
- IORING_OP_TEE

Now we have it for these as well:

- IORING_OP_SENDMSG
- IORING_OP_SEND
- IORING_OP_RECVMSG
- IORING_OP_RECV

For IORING_OP_RECVMSG we also check for the MSG_TRUNC and MSG_CTRUNC
flags in order to call req_set_fail_links().

There might be applications arround depending on the behavior
that even short send[msg]()/recv[msg]() retuns continue an
IOSQE_IO_LINK chain.

It's very unlikely that such applications pass in MSG_WAITALL,
which is only defined in 'man 2 recvmsg', but not in 'man 2 sendmsg'.

It's expected that the low level sock_sendmsg() call just ignores
MSG_WAITALL, as MSG_ZEROCOPY is also ignored without explicitly set
SO_ZEROCOPY.

We also expect the caller to know about the implicit truncation to
MAX_RW_COUNT, which we don't detect.

cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/r/c4e1a4cc0d905314f4d5dc567e65a7b09621aab3.1615908477.git.metze@samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

io-wq: ensure task is running before processing task_work

Mark the current task as running if we need to run task_work from the
io-wq threads as part of work handling. If that is the case, then return
as such so that the caller can appropriately loop back and reset if it
was part of a going-to-sleep flush.

Fixes: 3bfe6106693b ("io-wq: fork worker threads from original task")
Signed-off-by: Jens Axboe <axboe@kernel.dk>

signal: don't allow STOP on PF_IO_WORKER threads

Just like we don't allow normal signals to IO threads, don't deliver a
STOP to a task that has PF_IO_WORKER set. The IO threads don't take
signals in general, and have no means of flushing out a stop either.

Longer term, we may want to look into allowing stop of these threads,
as it relates to eg process freezing. For now, this prevents a spin
issue if a SIGSTOP is delivered to the parent task.

Reported-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

signal: don't allow sending any signals to PF_IO_WORKER threads

They don't take signals individually, and even if they share signals with
the parent task, don't allow them to be delivered through the worker
thread. Linux does allow this kind of behavior for regular threads, but
it's really a compatability thing that we need not care about for the IO
threads.

Reported-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

ext4: initialize ret to suppress smatch warning

Signed-off-by: Theodore Ts'o <tytso@mit.edu>