nvme-pci: fix timeout request state check

Polling the completion can progress the request state to IDLE, either
inline with the completion, or through softirq. Either way, the state
may not be COMPLETED, so don't check for that. We only care if the state
isn't IN_FLIGHT.

This is fixing an issue where the driver aborts an IO that we just
completed. Seeing the "aborting" message instead of "polled" is very
misleading as to where the timeout problem resides.

Fixes: bf392a5dc02a9b ("nvme-pci: Remove tag from process cq")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme-apple: only reset the controller when RTKit is running

NVMe controller register access hangs indefinitely when the co-processor
is not running. A missed reset is preferable over a hanging thread since
it could be recoverable.

Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme-apple: reset controller during shutdown

This is a functional revert of c76b8308e4c9 ("nvme-apple: fix controller
shutdown in apple_nvme_disable").

The commit broke suspend/resume since apple_nvme_reset_work() tries to
disable the controller on resume. This does not work for the apple NVMe
controller since register access only works while the co-processor
firmware is running.

Disabling the NVMe controller in the shutdown path is also required
for shutting the co-processor down. The original code was appropriate
for this hardware. Add a comment to prevent a similar breaking changes
in the future.

Fixes: c76b8308e4c9 ("nvme-apple: fix controller shutdown in apple_nvme_disable")
Reported-by: Janne Grunau <j@jannau.net>
Link: https://lore.kernel.org/all/20230110174745.GA3576@jannau.net/
Signed-off-by: Janne Grunau <j@jannau.net>
[hch: updated with a more descriptive comment from Hector Martin]
Signed-off-by: Christoph Hellwig <hch@lst.de>

Revert "net: team: use IFF_NO_ADDRCONF flag to prevent ipv6 addrconf"

This reverts commit 0aa64df30b382fc71d4fb1827d528e0eb3eff854.

Currently IFF_NO_ADDRCONF is used to prevent all ipv6 addrconf for the
slave ports of team, bonding and failover devices and it means no ipv6
packets can be sent out through these slave ports. However, for team
device, "nsna_ping" link_watch requires ipv6 addrconf. Otherwise, the
link will be marked failure. This patch removes the IFF_NO_ADDRCONF
flag set for team port, and we will fix the original issue in another
patch, as Jakub suggested.

Fixes: 0aa64df30b38 ("net: team: use IFF_NO_ADDRCONF flag to prevent ipv6 addrconf")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/63e09531fc47963d2e4eff376653d3db21b97058.1673980932.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

MAINTAINERS: add networking entries for Willem

We often have to ping Willem asking for reviews of patches
because he doesn't get included in the CC list. Add MAINTAINERS
entries for some of the areas he covers so that ./scripts/ will
know to add him.

Acked-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Link: https://lore.kernel.org/r/20230117190141.60795-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: sched: gred: prevent races when adding offloads to stats

Naresh reports seeing a warning that gred is calling
u64_stats_update_begin() with preemption enabled.
Arnd points out it's coming from _bstats_update().

We should be holding the qdisc lock when writing
to stats, they are also updated from the datapath.

Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Link: https://lore.kernel.org/all/CA+G9fYsTr9_r893+62u6UGD3dVaCE-kN9C-Apmb2m=hxjc1Cqg@mail.gmail.com/
Fixes: e49efd5288bd ("net: sched: gred: support reporting stats from offloads")
Link: https://lore.kernel.org/r/20230113044137.1383067-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

drm/amd/display: disable S/G display on DCN 3.1.4

Causes flickering or white screens in some configurations.
Disable it for now until we can fix the issue.

Cc: roman.li@amd.com
Cc: yifan1.zhang@amd.com
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x

drm/amd/display: disable S/G display on DCN 3.1.5

Causes flickering or white screens in some configurations.
Disable it for now until we can fix the issue.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2354
Cc: roman.li@amd.com
Cc: yifan1.zhang@amd.com
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x

drm/amdgpu: allow multipipe policy on ASICs with one MEC

Always enable multipipe policy on ASICs with GC VERSION > 9.0.0
instead of MEC number > 1.

This will allow multipipe policy on ASICs with one MEC,
e.g., gfx11 APUs.

Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x

drm/amdgpu: correct MEC number for gfx11 APUs

There is only one MEC on these APUs.

Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x

drm/amd/display: fix issues with driver unload

Currently, we run into a number of WARN()s when attempting to unload the
amdgpu driver (e.g. using "modprobe -r amdgpu"). These all stem from
calling drm_encoder_cleanup() too early. So, to fix this we can stop
calling drm_encoder_cleanup() from amdgpu_dm_fini() and instead have it
be called from amdgpu_dm_encoder_destroy(). Also, we don't need to free
in amdgpu_dm_encoder_destroy() since mst_encoders[] isn't explicitly
allocated by the slab allocator.

Fixes: f74367e492ba ("drm/amdgpu/display: create fake mst encoders ahead of time (v4)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix amdgpu_job_free_resources v2

It can be that neither fence were initialized when we run out of UVD
streams for example.

v2: fix typo breaking compile

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2324
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x

drm/amd/display: Fix COLOR_SPACE_YCBCR2020_TYPE matrix

The YCC conversion matrix for RGB -> COLOR_SPACE_YCBCR2020_TYPE is
missing the values for the fourth column of the matrix.

The fourth column of the matrix is essentially just a value that is
added given that the color is 3 components in size.
These values are needed to bias the chroma from the [-1, 1] -> [0, 1]
range.

This fixes color being very green when using Gamescope HDR on HDMI
output which prefers YCC 4:4:4.

Fixes: 40df2f809e8f ("drm/amd/display: color space ycbcr709 support")
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amd/display: Calculate output_color_space after pixel encoding adjustment

Code in get_output_color_space depends on knowing the pixel encoding to
determine whether to pick between eg. COLOR_SPACE_SRGB or
COLOR_SPACE_YCBCR709 for transparent RGB -> YCbCr 4:4:4 in the driver.

v2: Fixed patch being accidentally based on a personal feature branch, oops!

Fixes: ea117312ea9f ("drm/amd/display: Reduce HDMI pixel encoding if max clock is exceeded")
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amdgpu: fix cleaning up reserved VMID on release

We need to reset this or otherwise run into list corruption later on.

Fixes: e44a0fe630c5 ("drm/amdgpu: rework reserved VMID handling")
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Candice Li <candice.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge tag 'wireless-2023-01-18' of git://git./linux/kernel/git/wireless/wireless

Kalle Valo says:

====================
wireless fixes for v6.2

Third set of fixes for v6.2. This time most of them are for drivers,
only one revert for mac80211. For an important mt76 fix we had to
cherry pick two commits from wireless-next.

* tag 'wireless-2023-01-18' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
  Revert "wifi: mac80211: fix memory leak in ieee80211_if_add()"
  wifi: mt76: dma: fix a regression in adding rx buffers
  wifi: mt76: handle possible mt76_rx_token_consume failures
  wifi: mt76: dma: do not increment queue head if mt76_dma_add_buf fails
  wifi: rndis_wlan: Prevent buffer overflow in rndis_query_oid
  wifi: brcmfmac: fix regression for Broadcom PCIe wifi devices
  wifi: brcmfmac: avoid NULL-deref in survey dump for 2G only device
  wifi: brcmfmac: avoid handling disabled channels for survey dump
====================

Link: https://lore.kernel.org/r/20230118073749.AF061C433EF@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

drm/amdgpu: Correct the power calcultion for Renior/Cezanne.

From smu firmware,the value of power is transferred  in units of watts.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2321
Fixes: 137aac26a2ed ("drm/amdgpu/smu12: fix power reporting on renoir")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amd/display: Fix set scaling doesn's work

[Why]
Setting scaling does not correctly update CRTC state. As a result
dc stream state's src (composition area) && dest (addressable area)
was not calculated as expected. This causes set scaling doesn's work.

[How]
Correctly update CRTC state when setting scaling property.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: hongao <hongao@uniontech.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Merge tag 'for-linus-2023011801' of git://git./linux/kernel/git/hid/hid

Pull HID fixes from Jiri Kosina:

 - fixes for potential empty list handling in HID core (Pietro Borrello)

 - fix for NULL pointer dereference in betop driver that could be
   triggered by malicious device (Pietro Borrello)

 - fixes for handling calibration data preventing division by zero in
   Playstation driver (Roderick Colenbrander)

 - fix for memory leak on error path in amd-sfh driver (Basavaraj
   Natikar)

 - other few assorted small fixes and device ID-specific handling

* tag 'for-linus-2023011801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: betop: check shape of output reports
  HID: playstation: sanity check DualSense calibration data.
  HID: playstation: sanity check DualShock4 calibration data.
  HID: uclogic: Add support for XP-PEN Deco 01 V2
  HID: revert CHERRY_MOUSE_000C quirk
  HID: check empty report_list in bigben_probe()
  HID: check empty report_list in hid_validate_values()
  HID: amd_sfh: Fix warning unwind goto
  HID: intel_ish-hid: Add check for ishtp_dma_tx_map

cifs: remove unused function

Remove dfs_cache_update_tgthint() as it is not used anywhere.

Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>

cifs: do not include page data when checking signature

On async reads, page data is allocated before sending.  When the
response is received but it has no data to fill (e.g.
STATUS_END_OF_FILE), __calc_signature() will still include the pages in
its computation, leading to an invalid signature check.

This patch fixes this by not setting the async read smb_rqst page data
(zeroed by default) if its got_bytes is 0.

This can be reproduced/verified with xfstests generic/465.

Cc: <stable@vger.kernel.org>
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>

ACPI: PRM: Check whether EFI runtime is available

The ACPI PRM address space handler calls efi_call_virt_pointer() to
execute PRM firmware code, but doing so is only permitted when the EFI
runtime environment is available. Otherwise, such calls are guaranteed
to result in a crash, and must therefore be avoided.

Given that the EFI runtime services may become unavailable after a crash
occurring in the firmware, we need to check this each time the PRM
address space handler is invoked. If the EFI runtime services were not
available at registration time to being with, don't install the address
space handler at all.

Fixes: cefc7ca46235 ("ACPI: PRM: implement OperationRegion handler for the PlatformRtMechanism subtype")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

drm/i915: Remove unused variable

Removed unused i915 var.

Fixes: a273e95721e9 ("drm/i915: Allow switching away via vga-switcheroo if uninitialized")
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230118170624.9326-1-nirmoy.das@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge tag 'affs-for-6.2-tag' of git://git./linux/kernel/git/kdave/linux

Pull affs fix from David Sterba:
 "One minor fix for a KCSAN report"

* tag 'affs-for-6.2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  affs: initialize fsdata in affs_truncate()

Merge tag 'erofs-for-6.2-rc5' of git://git./linux/kernel/git/xiang/erofs

Pull erofs fixes from Gao Xiang:
 "Two patches fixes issues reported by syzbot, one fixes a missing
  `domain_id` mount option in documentation and a minor cleanup:

   - Fix wrong iomap->length calculation post EOF, which could cause a
     WARN_ON in iomap_iter_done() (Siddh)

   - Fix improper kvcalloc() use with __GFP_NOFAIL (me)

   - Add missing `domain_id` mount option in documentation (Jingbo)

   - Clean up fscache option parsing (Jingbo)"

* tag 'erofs-for-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
  erofs: clean up parsing of fscache related options
  erofs: add documentation for 'domain_id' mount option
  erofs: fix kvcalloc() misuse with __GFP_NOFAIL
  erofs/zmap.c: Fix incorrect offset calculation

Merge tag 'loongarch-fixes-6.2-1' of git://git./linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch fixes from Huacai Chen:
 "Fix a missing elf_hwcap, fix some stack unwinder bugs and two trivial
  cleanups"

* tag 'loongarch-fixes-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  LoongArch: Add generic ex-handler unwind in prologue unwinder
  LoongArch: Strip guess unwinder out from prologue unwinder
  LoongArch: Use correct sp value to get graph addr in stack unwinders
  LoongArch: Get frame info in unwind_start() when regs is not available
  LoongArch: Adjust PC value when unwind next frame in unwinder
  LoongArch: Simplify larch_insn_gen_xxx implementation
  LoongArch: Use common function sign_extend64()
  LoongArch: Add HWCAP_LOONGARCH_CPUCFG to elf_hwcap

phy: phy-can-transceiver: Skip warning if no "max-bitrate"

According to the DT bindings, the "max-bitrate" property is optional.
However, when it is not present, a warning is printed.
Fix this by adding a missing check for -EINVAL.

Fixes: a4a86d273ff1b6f7 ("phy: phy-can-transceiver: Add support for generic CAN transceiver driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/88e158f97dd52ebaa7126cd9631f34764b9c0795.1674037334.git.geert+renesas@glider.be
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dt-bindings: phy: g12a-usb2-phy: fix compatible string documentation

The compatible strings in the driver don't have the meson prefix.
Fix this in the documentation and rename the file accordingly.

Fixes: da86d286cce8 ("dt-bindings: phy: meson-g12a-usb2-phy: convert to yaml")
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/8d960029-e94d-224b-911f-03e5deb47ebc@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dt-bindings: phy: g12a-usb3-pcie-phy: fix compatible string documentation

The compatible string in the driver doesn't have the meson prefix.
Fix this in the documentation and rename the file accordingly.

Fixes: 87a55485f2fc ("dt-bindings: phy: meson-g12a-usb3-pcie-phy: convert to yaml")
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/0a82be92-ce85-da34-9d6f-4b33034473e5@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

cifs: fix return of uninitialized rc in dfs_cache_update_tgthint()

Fix this by initializing rc to 0 as cache_refresh_path() would not set
it in case of success.

Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/all/202301190004.bEHvbKG6-lkp@intel.com/
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>

drm/i915/dg2: Introduce Wa_18019271663

Wa_18019271663 applies to all DG2 steppings and skus.

Bspec: 66622

Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123183648.407058-2-matthew.s.atwood@intel.com
(cherry picked from commit 900a80c5836587d95db32742f66e1f34f7b40fcb)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915/dg2: Introduce Wa_18018764978

Wa_18018764978 applies to specific steppings of DG2 (G10 C0+,
G11 and G12 A0+). Clean up style in function at the same time.

Bspec: 66622

Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123183648.407058-1-matthew.s.atwood@intel.com
(cherry picked from commit 468a4e630c7da8cf586f85cc498d6097aed1ab4b)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

dmaengine: tegra: Fix memory leak in terminate_all()

Terminate vdesc when terminating an ongoing transfer.
This will ensure that the vdesc is present in the desc_terminated list
The descriptor will be freed later in desc_free_list().

This fixes the memory leaks which can happen when terminating an
ongoing transfer.

Fixes: ee17028009d4 ("dmaengine: tegra: Add tegra gpcdma driver")
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Link: https://lore.kernel.org/r/20230118115801.15210-1-akhilrajeev@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dmaengine: xilinx_dma: call of_node_put() when breaking out of for_each_child_of_node()

Since for_each_child_of_node() will increase the refcount of node, we need
to call of_node_put() manually when breaking out of the iteration.

Fixes: 9cd4360de609 ("dma: Add Xilinx AXI Video Direct Memory Access Engine driver support")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Acked-by: Peter Korsgaard <peter@korsgaard.com>
Link: https://lore.kernel.org/r/20221122021612.1908866-1-liushixin2@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

cifs: handle cache lookup errors different than -ENOENT

lookup_cache_entry() might return an error different than -ENOENT
(e.g. from ->char2uni), so handle those as well in
cache_refresh_path().

Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>

cifs: remove duplicate code in __refresh_tcon()

The logic for creating or updating a cache entry in __refresh_tcon()
could be simply done with cache_refresh_path(), so use it instead.

Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>

cifs: don't take exclusive lock for updating target hints

Avoid contention while updating dfs target hints.  This should be
perfectly fine to update them under shared locks.

Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>

cifs: avoid re-lookups in dfs_cache_find()

Simply downgrade the write lock on cache updates from
cache_refresh_path() and avoid unnecessary re-lookup in
dfs_cache_find().

Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>

cifs: fix potential deadlock in cache_refresh_path()

Avoid getting DFS referral from an exclusive lock in
cache_refresh_path() because the tcon IPC used for getting the
referral could be disconnected and thus causing a deadlock as shown
below:

task A                       task B
======                       ======
cifs_demultiplex_thread()    dfs_cache_find()
 cifs_handle_standard()       cache_refresh_path()
  reconnect_dfs_server()       down_write()
   dfs_cache_noreq_find()       get_dfs_referral()
    down_read() <- deadlock      smb2_get_dfs_refer()
                                  SMB2_ioctl()
   cifs_send_recv()
    compound_send_recv()
     wait_for_response()

where task A cannot wake up task B because it is blocked on
down_read() due to the exclusive lock held in cache_refresh_path() and
therefore not being able to make progress.

Fixes: c9f711039905 ("cifs: keep referral server sessions alive")
Reviewed-by: Aurélien Aptel <aurelien.aptel@gmail.com>
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>

drm/fb-helper: Set framebuffer for vga-switcheroo clients

Set the framebuffer info for drivers that support VGA switcheroo. Only
affects the amdgpu and nouveau drivers, which use VGA switcheroo and
generic fbdev emulation. For other drivers, this does nothing.

This fixes a potential regression in the console code. Both, amdgpu and
nouveau, invoked vga_switcheroo_client_fb_set() from their internal fbdev
code. But the call got lost when the drivers switched to the generic
emulation.

Fixes: 087451f372bf ("drm/amdgpu: use generic fb helpers instead of setting up AMD own's.")
Fixes: 4a16dd9d18a0 ("drm/nouveau/kms: switch to drm fbdev helpers")
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Evan Quan <evan.quan@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: Likun Gao <Likun.Gao@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Stanley Yang <Stanley.Yang@amd.com>
Cc: "Tianci.Yin" <tianci.yin@amd.com>
Cc: Xiaojian Du <Xiaojian.Du@amd.com>
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Cc: YiPeng Chai <YiPeng.Chai@amd.com>
Cc: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com>
Cc: Bokun Zhang <Bokun.Zhang@amd.com>
Cc: Guchun Chen <guchun.chen@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Solomon Chiu <solomon.chiu@amd.com>
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Marek Olšák" <marek.olsak@amd.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.17+
Link: https://patchwork.freedesktop.org/patch/msgid/20230116115425.13484-3-tzimmermann@suse.de

drm/i915: Allow switching away via vga-switcheroo if uninitialized

Always allow switching away via vga-switcheroo if the display is
uninitalized. Instead prevent switching to i915 if the device has
not been initialized.

This issue was introduced by commit 5df7bd130818 ("drm/i915: skip
display initialization when there is no display") protected, which
protects code paths from being executed on uninitialized devices.
In the case of vga-switcheroo, we want to allow a switch away from
i915's device. So run vga_switcheroo_process_delayed_switch() and
test in the switcheroo callbacks if the i915 device is available.

Fixes: 5df7bd130818 ("drm/i915: skip display initialization when there is no display")
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: "Jouni Högander" <jouni.hogander@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Ramalingam C <ramalingam.c@intel.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: "José Roberto de Souza" <jose.souza@intel.com>
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.14+
Link: https://patchwork.freedesktop.org/patch/msgid/20230116115425.13484-2-tzimmermann@suse.de

drm/i915/selftests: Unwind hugepages to drop wakeref on error

Make sure that upon error after we have acquired the wakeref we do
release it again.

v2: add another missing "goto out_wf"(Andi).

Fixes: 027c38b4121e ("drm/i915/selftests: Grab the runtime pm in shrink_thp")
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Chris Wilson <chris.p.wilson@linux.intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230117123234.26487-1-nirmoy.das@intel.com
(cherry picked from commit 14ec40a88210151296fff3e981c1a7196ad9bf55)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: re-disable RC6p on Sandy Bridge

RC6p on Sandy Bridge got re-enabled over time, causing visual glitches
and GPU hangs.

Disabled originally in commit 1c8ecf80fdee ("drm/i915: do not enable
RC6p on Sandy Bridge").

Signed-off-by: Sasa Dragic <sasa.dragic@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221219172927.9603-2-sasa.dragic@gmail.com
Fixes: fb6db0f5bf1d ("drm/i915: Remove unsafe i915.enable_rc6")
Fixes: 13c5a577b342 ("drm/i915/gt: Select the deepest available parking mode for rc6")
Cc: stable@vger.kernel.org
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 0c8a6e9ea232c221976a0670256bd861408d9917)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

HID: betop: check shape of output reports

betopff_init() only checks the total sum of the report counts for each
report field to be at least 4, but hid_betopff_play() expects 4 report
fields.
A device advertising an output report with one field and 4 report counts
would pass the check but crash the kernel with a NULL pointer dereference
in hid_betopff_play().

Fixes: 52cd7785f3cd ("HID: betop: add drivers/hid/hid-betopff.c")
Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

l2tp: prevent lockdep issue in l2tp_tunnel_register()

lockdep complains with the following lock/unlock sequence:

     lock_sock(sk);
     write_lock_bh(&sk->sk_callback_lock);
[1]  release_sock(sk);
[2]  write_unlock_bh(&sk->sk_callback_lock);

We need to swap [1] and [2] to fix this issue.

Fixes: 0b2c59720e65 ("l2tp: close all race conditions in l2tp_tunnel_register()")
Reported-by: syzbot+bbd35b345c7cab0d9a08@syzkaller.appspotmail.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/netdev/20230114030137.672706-1-xiyou.wangcong@gmail.com/T/#m1164ff20628671b0f326a24cb106ab3239c70ce3
Cc: Cong Wang <cong.wang@bytedance.com>
Cc: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

gpiolib: acpi: Add a ignore wakeup quirk for Clevo NL5xRU

commit 1796f808e4bb ("HID: i2c-hid: acpi: Stop setting wakeup_capable")
changed the policy such that I2C touchpads may be able to wake up the
system by default if the system is configured as such.

However on Clevo NL5xRU there is a mistake in the ACPI tables that the
TP_ATTN# signal connected to GPIO 9 is configured as ActiveLow and level
triggered but connected to a pull up. As soon as the system suspends the
touchpad loses power and then the system wakes up.

To avoid this problem, introduce a quirk for this model that will prevent
the wakeup capability for being set for GPIO 9.

Fixes: 1796f808e4bb ("HID: i2c-hid: acpi: Stop setting wakeup_capable")
Reported-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1722#note_1720627
Co-developed-by: Werner Sembach <wse@tuxedocomputers.com>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

gpiolib: acpi: Allow ignoring wake capability on pins that aren't in _AEI

Using the `ignore_wake` quirk or module parameter doesn't work for any pin
that has been specified in the _CRS instead of _AEI.

Extend the `acpi_gpio_irq_is_wake` check to cover both places.

Suggested-by: Raul Rangel <rrangel@chromium.org>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1722#note_1722335
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

virtio-net: correctly enable callback during start_xmit

Commit a7766ef18b33("virtio_net: disable cb aggressively") enables
virtqueue callback via the following statement:

        do {
if (use_napi)
virtqueue_disable_cb(sq->vq);

free_old_xmit_skbs(sq, false);

} while (use_napi && kick &&
               unlikely(!virtqueue_enable_cb_delayed(sq->vq)));

When NAPI is used and kick is false, the callback won't be enabled
here. And when the virtqueue is about to be full, the tx will be
disabled, but we still don't enable tx interrupt which will cause a TX
hang. This could be observed when using pktgen with burst enabled.

TO be consistent with the logic that tries to disable cb only for
NAPI, fixing this by trying to enable delayed callback only when NAPI
is enabled when the queue is about to be full.

Fixes: a7766ef18b33 ("virtio_net: disable cb aggressively")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: macb: fix PTP TX timestamp failure due to packet padding

PTP TX timestamp handling was observed to be broken with this driver
when using the raw Layer 2 PTP encapsulation. ptp4l was not receiving
the expected TX timestamp after transmitting a packet, causing it to
enter a failure state.

The problem appears to be due to the way that the driver pads packets
which are smaller than the Ethernet minimum of 60 bytes. If headroom
space was available in the SKB, this caused the driver to move the data
back to utilize it. However, this appears to cause other data references
in the SKB to become inconsistent. In particular, this caused the
ptp_one_step_sync function to later (in the TX completion path) falsely
detect the packet as a one-step SYNC packet, even when it was not, which
caused the TX timestamp to not be processed when it should be.

Using the headroom for this purpose seems like an unnecessary complexity
as this is not a hot path in the driver, and in most cases it appears
that there is sufficient tailroom to not require using the headroom
anyway. Remove this usage of headroom to prevent this inconsistency from
occurring and causing other problems.

Fixes: 653e92a9175e ("net: macb: add support for padding and fcs computation")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com> # on SAMA7G5
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

perf test build-id: Fix test check for PE file

Perf test "build id cache operations" fails for PE executable.  Logs
below from powerpc system.  Same is observed on x86 as well.

  <<>>
  Adding 5a0fd882b53084224ba47b624c55a469 ./tests/shell/../pe-file.exe: Ok
  build id: 5a0fd882b53084224ba47b624c55a469
  link: /tmp/perf.debug.w0V/.build-id/5a/0fd882b53084224ba47b624c55a469
  file: /tmp/perf.debug.w0V/.build-id/5a/../../root/<user>/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/elf
  failed: file /tmp/perf.debug.w0V/.build-id/5a/../../root/<user>/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/elf does not exist
  test child finished with -1
  ---- end ----
  build id cache operations: FAILED!
  <<>>

The test tries to do:

  <<>>
  mkdir /tmp/perf.debug.TeY1
  perf --buildid-dir /tmp/perf.debug.TeY1 buildid-cache -v -a ./tests/shell/../pe-file.exe
  <<>>

The option "--buildid-dir" sets the build id cache directory as
/tmp/perf.debug.TeY1. The option given to buildid-cahe, ie "-a
./tests/shell/../pe-file.exe", is to add the pe-file.exe to the cache.

The testcase, sets buildid-dir and adds the file: pe-file.exe to build
id cache. To check if the command is run successfully, "check" function
looks for presence of the file in buildid cache directory. But the check
here expects the added file to be executable. Snippet below:

  <<>>
  if [ ! -x $file ]; then
   echo "failed: file ${file} does not exist"
   exit 1
  fi
  <<>>

The buildid test is done for sha1 binary, md5 binary and also for PE
file. The first two binaries are created at runtime by compiling with
"--build-id" option and hence the check for sha1/md5 test should use [ !
-x ]. But in case of PE file, the permission for this input file is
rw-r--r-- Hence the file added to build id cache has same permissoin

Original file:

  ls tests/pe-file.exe | xargs stat --printf "%n %A \n"
  tests/pe-file.exe -rw-r--r--

buildid cache file:

  ls /tmp/perf.debug.w0V/.build-id/5a/../../root/<user>/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/elf | xargs stat --printf "%n %A \n"
  /tmp/perf.debug.w0V/.build-id/5a/../../root/<user>/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/elf -rw-r--r--

Fix the test to match with the permission of original file in case of FE
file. ie if the "tests/pe-file.exe" file is not having exec permission,
just check for existence of the buildid file using [ ! -e <file> ]

Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Disha Goel <disgoel@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230116050131.17221-2-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge git://git./linux/kernel/git/netfilter/nf

Pablo Niera Ayuso says:

====================

The following patchset contains Netfilter fixes for net:

1) Fix syn-retransmits until initiator gives up when connection is re-used
   due to rst marked as invalid, from Florian Westphal.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

perf buildid-cache: Fix the file mode with copyfile() while adding file to build-id cache

The test "build id cache operations" fails on powerpc as below:

Adding 5a0fd882b53084224ba47b624c55a469 ./tests/shell/../pe-file.exe: Ok
build id: 5a0fd882b53084224ba47b624c55a469
link: /tmp/perf.debug.ZTu/.build-id/5a/0fd882b53084224ba47b624c55a469
file: /tmp/perf.debug.ZTu/.build-id/5a/../../root/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/elf
failed: file /tmp/perf.debug.ZTu/.build-id/5a/../../root/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/elf does not exist
test child finished with -1
---- end ----
build id cache operations: FAILED!

The failing test is when trying to add pe-file.exe to build id cache.

'perf buildid-cache' can be used to add/remove/manage files from the
build-id cache. "-a" option is used to add a file to the build-id cache.

Simple command to do so for a PE exe file:

  # ls -ltr tests/pe-file.exe
  -rw-r--r--. 1 root root 75595 Jan 10 23:35 tests/pe-file.exe

  The file is in home directory.

  # mkdir  /tmp/perf.debug.TeY1
  # perf --buildid-dir /tmp/perf.debug.TeY1 buildid-cache -v -a tests/pe-file.exe

The above will create ".build-id" folder in build id directory, which is
/tmp/perf.debug.TeY1. Also adds file to this folder under build id.
Example:

  # ls -ltr /tmp/perf.debug.TeY1/.build-id/5a/0fd882b53084224ba47b624c55a469/
  total 76
  -rw-r--r--. 1 root root     0 Jan 11 00:38 probes
  -rwxr-xr-x. 1 root root 75595 Jan 11 00:38 elf

We can see in the results that file mode for original file and file in
build id directory is different. ie, build id file has executable
permission whereas original file doesn’t have.

The code path and function (build_id_cache__add  to add a file to the
cache is in "util/build-id.c". In build_id_cache__add() function, it
first attempts to link the original file to destination cache folder.

If linking the file fails (which can happen if the destination and
source is on a different mount points), it will copy the file to
destination.  Here copyfile() routine explicitly uses mode as "755" and
hence file in the destination will have executable permission.

Code snippet:

 if (link(realname, filename) && errno != EEXIST && copyfile(name, filename))

strace logs:

172285 link("/home/<user_name>/linux/tools/perf/tests/pe-file.exe", "/tmp/perf.debug.TeY1/home/<user_name>/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/elf") = -1 EXDEV (Invalid cross-device link)
172285 newfstatat(AT_FDCWD, "tests/pe-file.exe", {st_mode=S_IFREG|0644, st_size=75595, ...}, 0) = 0
172285 openat(AT_FDCWD, "/tmp/perf.debug.TeY1/home/<user_name>/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/.elf.KbAnsl", O_RDWR|O_CREAT|O_EXCL, 0600) = 3
172285 fchmod(3, 0755)                  = 0
172285 openat(AT_FDCWD, "tests/pe-file.exe", O_RDONLY) = 4
172285 mmap(NULL, 75595, PROT_READ, MAP_PRIVATE, 4, 0) = 0x7fffa5cd0000
172285 pwrite64(3, "MZ\220\0\3\0\0\0\4\0\0\0\377\377\0\0\270\0\0\0\0\0\0\0@\0\0\0\0\0\0\0"..., 75595, 0) = 75595

Whereas if the link succeeds, it succeeds in the first attempt itself
and the file in the build-id dir will have same permission as original
file.

Example, above uses /tmp. Instead if we use "--buildid-dir /home/build",
linking will work here since mount points are same. Hence the
destination file will not have executable permission.

Since the testcase "tests/shell/buildid.sh" always looks for executable
file, test fails in powerpc environment when test is run from /root.

The patch adds a change in build_id_cache__add() to use copyfile_mode()
which also passes the file’s original mode as argument. This way the
destination file mode also will be same as original file.

Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Disha Goel <disgoel@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230116050131.17221-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf expr: Prevent normalize() from reading into undefined memory in the expression lexer

The current implementation does not account for a trailing backslash
followed by a null-byte.

If a null-byte is encountered following a backslash, normalize() will
continue reading (and potentially writing) into garbage memory ignoring
the EOS null-byte.

Signed-off-by: Sohom Datta <sohomdatta1+git@gmail.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221204105836.1012885-1-sohomdatta1+git@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tools headers: Syncronize linux/build_bug.h with the kernel sources

To pick up the changes in:

  07a368b3f55a79d3 ("bug: introduce ASSERT_STRUCT_OFFSET")

This cset only introduces a build time assert macro, that may be useful
at some point for tooling, for now it silences this perf build warning:

  Warning: Kernel ABI header at 'tools/include/linux/build_bug.h' differs from latest version at 'include/linux/build_bug.h'
  diff -u tools/include/linux/build_bug.h include/linux/build_bug.h

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: http://lore.kernel.org/lkml/Y8f0jqQFYDAOBkHx@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf beauty: Update copy of linux/socket.h with the kernel sources

To pick the changes in:

  b5f0de6df6dce8d6 ("net: dev: Convert sa_data to flexible array in struct sockaddr")

That don't result in any changes in the tables generated from that
header.

This silences this perf build warning:

  Warning: Kernel ABI header at 'tools/perf/trace/beauty/include/linux/socket.h' differs from latest version at 'include/linux/socket.h'
  diff -u tools/perf/trace/beauty/include/linux/socket.h include/linux/socket.h

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tools headers arm64: Sync arm64's cputype.h with the kernel sources

To get the changes in:

  decb17aeb8fa2148 ("KVM: arm64: vgic: Add Apple M2 cpus to the list of broken SEIS implementations")
  07e39e60bbf0ccd5 ("arm64: Add Cortex-715 CPU part definition")
  8ec8490a1950efec ("arm64: Fix bit-shifting UB in the MIDR_CPU_MODEL() macro")

That addresses this perf build warning:

  Warning: Kernel ABI header at 'tools/arch/arm64/include/asm/cputype.h' differs from latest version at 'arch/arm64/include/asm/cputype.h'
  diff -u tools/arch/arm64/include/asm/cputype.h arch/arm64/include/asm/cputype.h

Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: D Scott Phillips <scott@os.amperecomputing.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: http://lore.kernel.org/lkml/Y8fvEGCGn+227qW0@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tools kvm headers arm64: Update KVM header from the kernel sources

To pick the changes from:

  9cb1096f8590bc59 ("KVM: arm64: Enable ring-based dirty memory tracking")

That doesn't result in any changes in tooling (built on a Libre Computer
Firefly ROC-RK3399-PC-V1.1-A running Ubuntu 22.04), only addresses this
perf build warning:

  Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm64/include/uapi/asm/kvm.h'
  diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Gavin Shan <gshan@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/Y8fmIT5PIfGaZuwa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

dmaengine: imx-sdma: Fix a possible memory leak in sdma_transfer_init

If the function sdma_load_context() fails, the sdma_desc will be
freed, but the allocated desc->bd is forgot to be freed.

We already met the sdma_load_context() failure case and the log as
below:
[ 450.699064] imx-sdma 30bd0000.dma-controller: Timeout waiting for CH0 ready
...

In this case, the desc->bd will not be freed without this change.

Signed-off-by: Hui Wang <hui.wang@canonical.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20221130090800.102035-1-hui.wang@canonical.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dmaengine: Fix double increment of client_count in dma_chan_get()

The first time dma_chan_get() is called for a channel the channel
client_count is incorrectly incremented twice for public channels,
first in balance_ref_count(), and again prior to returning. This
results in an incorrect client count which will lead to the
channel resources not being freed when they should be. A simple
 test of repeated module load and unload of async_tx on a Dell
 Power Edge R7425 also shows this resulting in a kref underflow
 warning.

[  124.329662] async_tx: api initialized (async)
[  129.000627] async_tx: api initialized (async)
[  130.047839] ------------[ cut here ]------------
[  130.052472] refcount_t: underflow; use-after-free.
[  130.057279] WARNING: CPU: 3 PID: 19364 at lib/refcount.c:28
refcount_warn_saturate+0xba/0x110
[  130.065811] Modules linked in: async_tx(-) rfkill intel_rapl_msr
intel_rapl_common amd64_edac edac_mce_amd ipmi_ssif kvm_amd dcdbas kvm
mgag200 drm_shmem_helper acpi_ipmi irqbypass drm_kms_helper ipmi_si
syscopyarea sysfillrect rapl pcspkr ipmi_devintf sysimgblt fb_sys_fops
k10temp i2c_piix4 ipmi_msghandler acpi_power_meter acpi_cpufreq vfat
fat drm fuse xfs libcrc32c sd_mod t10_pi sg ahci crct10dif_pclmul
libahci crc32_pclmul crc32c_intel ghash_clmulni_intel igb megaraid_sas
i40e libata i2c_algo_bit ccp sp5100_tco dca dm_mirror dm_region_hash
dm_log dm_mod [last unloaded: async_tx]
[  130.117361] CPU: 3 PID: 19364 Comm: modprobe Kdump: loaded Not
tainted 5.14.0-185.el9.x86_64 #1
[  130.126091] Hardware name: Dell Inc. PowerEdge R7425/02MJ3T, BIOS
1.18.0 01/17/2022
[  130.133806] RIP: 0010:refcount_warn_saturate+0xba/0x110
[  130.139041] Code: 01 01 e8 6d bd 55 00 0f 0b e9 72 9d 8a 00 80 3d
26 18 9c 01 00 75 85 48 c7 c7 f8 a3 03 9d c6 05 16 18 9c 01 01 e8 4a
bd 55 00 <0f> 0b e9 4f 9d 8a 00 80 3d 01 18 9c 01 00 0f 85 5e ff ff ff
48 c7
[  130.157807] RSP: 0018:ffffbf98898afe68 EFLAGS: 00010286
[  130.163036] RAX: 0000000000000000 RBX: ffff9da06028e598 RCX: 0000000000000000
[  130.170172] RDX: ffff9daf9de26480 RSI: ffff9daf9de198a0 RDI: ffff9daf9de198a0
[  130.177316] RBP: ffff9da7cddf3970 R08: 0000000000000000 R09: 00000000ffff7fff
[  130.184459] R10: ffffbf98898afd00 R11: ffffffff9d9e8c28 R12: ffff9da7cddf1970
[  130.191596] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[  130.198739] FS:  00007f646435c740(0000) GS:ffff9daf9de00000(0000)
knlGS:0000000000000000
[  130.206832] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  130.212586] CR2: 00007f6463b214f0 CR3: 00000008ab98c000 CR4: 00000000003506e0
[  130.219729] Call Trace:
[  130.222192]  <TASK>
[  130.224305]  dma_chan_put+0x10d/0x110
[  130.227988]  dmaengine_put+0x7a/0xa0
[  130.231575]  __do_sys_delete_module.constprop.0+0x178/0x280
[  130.237157]  ? syscall_trace_enter.constprop.0+0x145/0x1d0
[  130.242652]  do_syscall_64+0x5c/0x90
[  130.246240]  ? exc_page_fault+0x62/0x150
[  130.250178]  entry_SYSCALL_64_after_hwframe+0x63/0xcd
[  130.255243] RIP: 0033:0x7f6463a3f5ab
[  130.258830] Code: 73 01 c3 48 8b 0d 75 a8 1b 00 f7 d8 64 89 01 48
83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00
00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 45 a8 1b 00 f7 d8 64 89
01 48
[  130.277591] RSP: 002b:00007fff22f972c8 EFLAGS: 00000206 ORIG_RAX:
00000000000000b0
[  130.285164] RAX: ffffffffffffffda RBX: 000055b6786edd40 RCX: 00007f6463a3f5ab
[  130.292303] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 000055b6786edda8
[  130.299443] RBP: 000055b6786edd40 R08: 0000000000000000 R09: 0000000000000000
[  130.306584] R10: 00007f6463b9eac0 R11: 0000000000000206 R12: 000055b6786edda8
[  130.313731] R13: 0000000000000000 R14: 000055b6786edda8 R15: 00007fff22f995f8
[  130.320875]  </TASK>
[  130.323081] ---[ end trace eff7156d56b5cf25 ]---

cat /sys/class/dma/dma0chan*/in_use would get the wrong result.
2
2
2

Fixes: d2f4f99db3e9 ("dmaengine: Rework dma_chan_get")
Signed-off-by: Koba Ko <koba.ko@canonical.com>
Reviewed-by: Jie Hai <haijie1@huawei.com>
Test-by: Jie Hai <haijie1@huawei.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Tested-by: Joel Savitz <jsavitz@redhat.com>
Link: https://lore.kernel.org/r/20221201030050.978595-1-koba.ko@canonical.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dmaengine: tegra210-adma: fix global intr clear

The current global interrupt clear programming register offset
was not correct. Fix the programming with right offset

Fixes: ded1f3db4cd6 ("dmaengine: tegra210-adma: prepare for supporting newer Tegra chips")
Cc: stable@vger.kernel.org
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Link: https://lore.kernel.org/r/20230102064844.31306-1-mkumard@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

Add exception protection processing for vd in axi_chan_handle_err function

Since there is no protection for vd, a kernel panic will be
triggered here in exceptional cases.

You can refer to the processing of axi_chan_block_xfer_complete function

The triggered kernel panic is as follows:

[   67.848444] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000060
[   67.848447] Mem abort info:
[   67.848449]   ESR = 0x96000004
[   67.848451]   EC = 0x25: DABT (current EL), IL = 32 bits
[   67.848454]   SET = 0, FnV = 0
[   67.848456]   EA = 0, S1PTW = 0
[   67.848458] Data abort info:
[   67.848460]   ISV = 0, ISS = 0x00000004
[   67.848462]   CM = 0, WnR = 0
[   67.848465] user pgtable: 4k pages, 48-bit VAs, pgdp=00000800c4c0b000
[   67.848468] [0000000000000060] pgd=0000000000000000, p4d=0000000000000000
[   67.848472] Internal error: Oops: 96000004 [#1] SMP
[   67.848475] Modules linked in: dmatest
[   67.848479] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.100-emu_x2rc+ #11
[   67.848483] pstate: 62000085 (nZCv daIf -PAN -UAO +TCO BTYPE=--)
[   67.848487] pc : axi_chan_handle_err+0xc4/0x230
[   67.848491] lr : axi_chan_handle_err+0x30/0x230
[   67.848493] sp : ffff0803fe55ae50
[   67.848495] x29: ffff0803fe55ae50 x28: ffff800011212200
[   67.848500] x27: ffff0800c42c0080 x26: ffff0800c097c080
[   67.848504] x25: ffff800010d33880 x24: ffff80001139d850
[   67.848508] x23: ffff0800c097c168 x22: 0000000000000000
[   67.848512] x21: 0000000000000080 x20: 0000000000002000
[   67.848517] x19: ffff0800c097c080 x18: 0000000000000000
[   67.848521] x17: 0000000000000000 x16: 0000000000000000
[   67.848525] x15: 0000000000000000 x14: 0000000000000000
[   67.848529] x13: 0000000000000000 x12: 0000000000000040
[   67.848533] x11: ffff0800c0400248 x10: ffff0800c040024a
[   67.848538] x9 : ffff800010576cd4 x8 : ffff0800c0400270
[   67.848542] x7 : 0000000000000000 x6 : ffff0800c04003e0
[   67.848546] x5 : ffff0800c0400248 x4 : ffff0800c4294480
[   67.848550] x3 : dead000000000100 x2 : dead000000000122
[   67.848555] x1 : 0000000000000100 x0 : ffff0800c097c168
[   67.848559] Call trace:
[   67.848562]  axi_chan_handle_err+0xc4/0x230
[   67.848566]  dw_axi_dma_interrupt+0xf4/0x590
[   67.848569]  __handle_irq_event_percpu+0x60/0x220
[   67.848573]  handle_irq_event+0x64/0x120
[   67.848576]  handle_fasteoi_irq+0xc4/0x220
[   67.848580]  __handle_domain_irq+0x80/0xe0
[   67.848583]  gic_handle_irq+0xc0/0x138
[   67.848585]  el1_irq+0xc8/0x180
[   67.848588]  arch_cpu_idle+0x14/0x2c
[   67.848591]  default_idle_call+0x40/0x16c
[   67.848594]  do_idle+0x1f0/0x250
[   67.848597]  cpu_startup_entry+0x2c/0x60
[   67.848600]  rest_init+0xc0/0xcc
[   67.848603]  arch_call_rest_init+0x14/0x1c
[   67.848606]  start_kernel+0x4cc/0x500
[   67.848610] Code: eb0002ff 9a9f12d6 f2fbd5a2 f2fbd5a3 (a94602c1)
[   67.848613] ---[ end trace 585a97036f88203a ]---

Signed-off-by: Shawn.Shao <shawn.shao@jaguarmicro.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230112055802.1764-1-shawn.shao@jaguarmicro.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

drm/panfrost: fix GENERIC_ATOMIC64 dependency

On ARMv5 and earlier, a randconfig build can still run into

WARNING: unmet direct dependencies detected for IOMMU_IO_PGTABLE_LPAE
  Depends on [n]: IOMMU_SUPPORT [=y] && (ARM [=y] || ARM64 || COMPILE_TEST [=y]) && !GENERIC_ATOMIC64 [=y]
  Selected by [y]:
  - DRM_PANFROST [=y] && HAS_IOMEM [=y] && DRM [=y] && (ARM [=y] || ARM64 || COMPILE_TEST [=y] && !GENERIC_ATOMIC64 [=y]) && MMU [=y]

Rework the dependencies to always require a working cmpxchg64.

Fixes: db594ba3fcf9 ("drm/panfrost: depend on !GENERIC_ATOMIC64 when using COMPILE_TEST")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230117164456.1591901-1-arnd@kernel.org

dmaengine: lgm: Move DT parsing after initialization

ldma_cfg_init() will parse DT to retrieve certain configs.
However, that is called before ldma_dma_init_vXX(), which
will make some initialization to channel configs. It will
thus incorrectly overwrite certain configs that are declared
in DT.

To fix that, we move DT parsing after initialization.
Function name is renamed to better represent what it does.

Fixes: 32d31c79a1a4 ("dmaengine: Add Intel LGM SoC DMA support.")
Signed-off-by: Peter Harliman Liem <pliem@maxlinear.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/afef6fc1ed20098b684e0d53737d69faf63c125f.1672887183.git.pliem@maxlinear.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

HID: playstation: sanity check DualSense calibration data.

Make sure calibration values are defined to prevent potential kernel
crashes. This fixes a hypothetical issue for virtual or clone devices
inspired by a similar fix for DS4.

Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID: playstation: sanity check DualShock4 calibration data.

Some DualShock4 devices report invalid calibration data resulting
in kernel oopses due to division by zero during report handling.

The devices affected generally appear to be clone devices, which don't
implement all reports properly and don't populate proper calibration
data. The issue may have been seen on an official device with erased
calibration reports.

This patch prevents the crashes by essentially disabling calibration
when invalid values are detected.

Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Tested-by: Alain Carlucci <alain.carlucci@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID: uclogic: Add support for XP-PEN Deco 01 V2

The XP-PEN Deco 01 V2 is a UGEE v2 device with a frame with 8 buttons.
Its pen has 2 buttons, supports tilt and pressure.

Add its ID in order to support the device.

Link: https://gitlab.freedesktop.org/libinput/libinput/-/issues/839
Tested-by: Mark Waddoups <mwaddoups@gmail.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

net: mlx5: eliminate anonymous module_init & module_exit

Eliminate anonymous module_init() and module_exit(), which can lead to
confusion or ambiguity when reading System.map, crashes/oops/bugs,
or an initcall_debug log.

Give each of these init and exit functions unique driver-specific
names to eliminate the anonymous names.

Example 1: (System.map)
 ffffffff832fc78c t init
 ffffffff832fc79e t init
 ffffffff832fc8f8 t init

Example 2: (initcall_debug log)
 calling  init+0x0/0x12 @ 1
 initcall init+0x0/0x12 returned 0 after 15 usecs
 calling  init+0x0/0x60 @ 1
 initcall init+0x0/0x60 returned 0 after 2 usecs
 calling  init+0x0/0x9a @ 1
 initcall init+0x0/0x9a returned 0 after 74 usecs

Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Eli Cohen <eli@mellanox.com>
Cc: Saeed Mahameed <saeedm@nvidia.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: linux-rdma@vger.kernel.org
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: E-switch, Fix switchdev mode after devlink reload

The cited commit removes eswitch mode none. So after devlink reload
in switchdev mode, eswitch mode is not changed. But actually eswitch
is disabled during devlink reload.

Fix it by setting eswitch mode to legacy when disabling eswitch
which is called by reload_down.

Fixes: f019679ea5f2 ("net/mlx5: E-switch, Remove dependency between sriov and eswitch mode")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: Protect global IPsec ASO

ASO operations are global to whole IPsec as they share one DMA address
for all operations. As such all WQE operations need to be protected with
lock. In this case, it must be spinlock to allow mlx5e_ipsec_aso_query()
operate in atomic context.

Fixes: 1ed78fc03307 ("net/mlx5e: Update IPsec soft and hard limits")
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: Remove optimization which prevented update of ESN state

aso->use_cache variable introduced in commit 8c582ddfbb47 ("net/mlx5e: Handle
hardware IPsec limits events") was an optimization to skip recurrent calls
to mlx5e_ipsec_aso_query(). Such calls are possible when lifetime event is
generated:
 -> mlx5e_ipsec_handle_event()
  -> mlx5e_ipsec_aso_query() - first call
  -> xfrm_state_check_expire()
   -> mlx5e_xfrm_update_curlft()
    -> mlx5e_ipsec_aso_query() - second call

However, such optimization not really effective as mlx5e_ipsec_aso_query()
is needed to be called for update ESN anyway, which was missed due to misplaced
use_cache assignment.

Fixes: cee137a63431 ("net/mlx5e: Handle ESN update events")
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: Set decap action based on attr for sample

Currently decap action is set based on tunnel_id. That means it is
set unconditionally. But for decap, ct and sample actions, decap is
done before ct. No need to decap again in sample.

And the actions are set correctly when parsing. So set decap action
based on attr instead of tunnel_id.

Fixes: 2741f2230905 ("net/mlx5e: TC, Support sample offload action for tunneled traffic")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: QoS, Fix wrongfully setting parent_element_id on MODIFY_SCHEDULING_ELEMENT

According to HW spec parent_element_id field should be reserved (0x0) when calling
MODIFY_SCHEDULING_ELEMENT command.

This patch remove the wrong initialization of reserved field, parent_element_id, on
mlx5_qos_update_node.

Fixes: 214baf22870c ("net/mlx5e: Support HTB offload")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: E-switch, Fix setting of reserved fields on MODIFY_SCHEDULING_ELEMENT

According to HW spec element_type, element_attributes and parent_element_id fields
should be reserved (0x0) when calling MODIFY_SCHEDULING_ELEMENT command.

This patch remove initialization of these fields when calling the command.

Fixes: bd77bf1cb595 ("net/mlx5: Add SRIOV VF max rate configuration support")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: Remove redundant xsk pointer check in mlx5e_mpwrq_validate_xsk

This validation function is relevant only for XSK cases, hence it
assumes to be called only with xsk != NULL.
Thus checking for invalid xsk pointer is redundant and misleads static
code analyzers.
This commit removes redundant xsk pointer check.

This solves the following smatch warning:
drivers/net/ethernet/mellanox/mlx5/core/en/params.c:481
mlx5e_mpwrq_validate_xsk() error: we previously assumed 'xsk' could be
null (see line 478)

Fixes: 6470d2e7e8ed ("net/mlx5e: xsk: Use KSM for unaligned XSK")
Signed-off-by: Adham Faris <afaris@nvidia.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: Avoid false lock dependency warning on tc_ht even more

The cited commit changed class of tc_ht internal mutex in order to avoid
false lock dependency with fs_core node and flow_table hash table
structures. However, hash table implementation internally also includes a
workqueue task with its own lockdep map which causes similar bogus lockdep
splat[0]. Fix it by also adding dedicated class for hash table workqueue
work structure of tc_ht.

[0]:

[ 1139.672465] ======================================================
[ 1139.673552] WARNING: possible circular locking dependency detected
[ 1139.674635] 6.1.0_for_upstream_debug_2022_12_12_17_02 #1 Not tainted
[ 1139.675734] ------------------------------------------------------
[ 1139.676801] modprobe/5998 is trying to acquire lock:
[ 1139.677726] ffff88811e7b93b8 (&node->lock){++++}-{3:3}, at: down_write_ref_node+0x7c/0xe0 [mlx5_core]
[ 1139.679662]
               but task is already holding lock:
[ 1139.680703] ffff88813c1f96a0 (&tc_ht_lock_key){+.+.}-{3:3}, at: rhashtable_free_and_destroy+0x38/0x6f0
[ 1139.682223]
               which lock already depends on the new lock.

[ 1139.683640]
               the existing dependency chain (in reverse order) is:
[ 1139.684887]
               -> #2 (&tc_ht_lock_key){+.+.}-{3:3}:
[ 1139.685975]        __mutex_lock+0x12c/0x14b0
[ 1139.686659]        rht_deferred_worker+0x35/0x1540
[ 1139.687405]        process_one_work+0x7c2/0x1310
[ 1139.688134]        worker_thread+0x59d/0xec0
[ 1139.688820]        kthread+0x28f/0x330
[ 1139.689444]        ret_from_fork+0x1f/0x30
[ 1139.690106]
               -> #1 ((work_completion)(&ht->run_work)){+.+.}-{0:0}:
[ 1139.691250]        __flush_work+0xe8/0x900
[ 1139.691915]        __cancel_work_timer+0x2ca/0x3f0
[ 1139.692655]        rhashtable_free_and_destroy+0x22/0x6f0
[ 1139.693472]        del_sw_flow_table+0x22/0xb0 [mlx5_core]
[ 1139.694592]        tree_put_node+0x24c/0x450 [mlx5_core]
[ 1139.695686]        tree_remove_node+0x6e/0x100 [mlx5_core]
[ 1139.696803]        mlx5_destroy_flow_table+0x187/0x690 [mlx5_core]
[ 1139.698017]        mlx5e_tc_nic_cleanup+0x2f8/0x400 [mlx5_core]
[ 1139.699217]        mlx5e_cleanup_nic_rx+0x2b/0x210 [mlx5_core]
[ 1139.700397]        mlx5e_detach_netdev+0x19d/0x2b0 [mlx5_core]
[ 1139.701571]        mlx5e_suspend+0xdb/0x140 [mlx5_core]
[ 1139.702665]        mlx5e_remove+0x89/0x190 [mlx5_core]
[ 1139.703756]        auxiliary_bus_remove+0x52/0x70
[ 1139.704492]        device_release_driver_internal+0x3c1/0x600
[ 1139.705360]        bus_remove_device+0x2a5/0x560
[ 1139.706080]        device_del+0x492/0xb80
[ 1139.706724]        mlx5_rescan_drivers_locked+0x194/0x6a0 [mlx5_core]
[ 1139.707961]        mlx5_unregister_device+0x7a/0xa0 [mlx5_core]
[ 1139.709138]        mlx5_uninit_one+0x5f/0x160 [mlx5_core]
[ 1139.710252]        remove_one+0xd1/0x160 [mlx5_core]
[ 1139.711297]        pci_device_remove+0x96/0x1c0
[ 1139.722721]        device_release_driver_internal+0x3c1/0x600
[ 1139.723590]        unbind_store+0x1b1/0x200
[ 1139.724259]        kernfs_fop_write_iter+0x348/0x520
[ 1139.725019]        vfs_write+0x7b2/0xbf0
[ 1139.725658]        ksys_write+0xf3/0x1d0
[ 1139.726292]        do_syscall_64+0x3d/0x90
[ 1139.726942]        entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 1139.727769]
               -> #0 (&node->lock){++++}-{3:3}:
[ 1139.728698]        __lock_acquire+0x2cf5/0x62f0
[ 1139.729415]        lock_acquire+0x1c1/0x540
[ 1139.730076]        down_write+0x8e/0x1f0
[ 1139.730709]        down_write_ref_node+0x7c/0xe0 [mlx5_core]
[ 1139.731841]        mlx5_del_flow_rules+0x6f/0x610 [mlx5_core]
[ 1139.732982]        __mlx5_eswitch_del_rule+0xdd/0x560 [mlx5_core]
[ 1139.734207]        mlx5_eswitch_del_offloaded_rule+0x14/0x20 [mlx5_core]
[ 1139.735491]        mlx5e_tc_rule_unoffload+0x104/0x2b0 [mlx5_core]
[ 1139.736716]        mlx5e_tc_unoffload_fdb_rules+0x10c/0x1f0 [mlx5_core]
[ 1139.738007]        mlx5e_tc_del_fdb_flow+0xc3c/0xfa0 [mlx5_core]
[ 1139.739213]        mlx5e_tc_del_flow+0x146/0xa20 [mlx5_core]
[ 1139.740377]        _mlx5e_tc_del_flow+0x38/0x60 [mlx5_core]
[ 1139.741534]        rhashtable_free_and_destroy+0x3be/0x6f0
[ 1139.742351]        mlx5e_tc_ht_cleanup+0x1b/0x30 [mlx5_core]
[ 1139.743512]        mlx5e_cleanup_rep_tx+0x4a/0xe0 [mlx5_core]
[ 1139.744683]        mlx5e_detach_netdev+0x1ca/0x2b0 [mlx5_core]
[ 1139.745860]        mlx5e_netdev_change_profile+0xd9/0x1c0 [mlx5_core]
[ 1139.747098]        mlx5e_netdev_attach_nic_profile+0x1b/0x30 [mlx5_core]
[ 1139.748372]        mlx5e_vport_rep_unload+0x16a/0x1b0 [mlx5_core]
[ 1139.749590]        __esw_offloads_unload_rep+0xb1/0xd0 [mlx5_core]
[ 1139.750813]        mlx5_eswitch_unregister_vport_reps+0x409/0x5f0 [mlx5_core]
[ 1139.752147]        mlx5e_rep_remove+0x62/0x80 [mlx5_core]
[ 1139.753293]        auxiliary_bus_remove+0x52/0x70
[ 1139.754028]        device_release_driver_internal+0x3c1/0x600
[ 1139.754885]        driver_detach+0xc1/0x180
[ 1139.755553]        bus_remove_driver+0xef/0x2e0
[ 1139.756260]        auxiliary_driver_unregister+0x16/0x50
[ 1139.757059]        mlx5e_rep_cleanup+0x19/0x30 [mlx5_core]
[ 1139.758207]        mlx5e_cleanup+0x12/0x30 [mlx5_core]
[ 1139.759295]        mlx5_cleanup+0xc/0x49 [mlx5_core]
[ 1139.760384]        __x64_sys_delete_module+0x2b5/0x450
[ 1139.761166]        do_syscall_64+0x3d/0x90
[ 1139.761827]        entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 1139.762663]
               other info that might help us debug this:

[ 1139.763925] Chain exists of:
                 &node->lock --> (work_completion)(&ht->run_work) --> &tc_ht_lock_key

[ 1139.765743]  Possible unsafe locking scenario:

[ 1139.766688]        CPU0                    CPU1
[ 1139.767399]        ----                    ----
[ 1139.768111]   lock(&tc_ht_lock_key);
[ 1139.768704]                                lock((work_completion)(&ht->run_work));
[ 1139.769869]                                lock(&tc_ht_lock_key);
[ 1139.770770]   lock(&node->lock);
[ 1139.771326]
                *** DEADLOCK ***

[ 1139.772345] 2 locks held by modprobe/5998:
[ 1139.772994]  #0: ffff88813c1ff0e8 (&dev->mutex){....}-{3:3}, at: device_release_driver_internal+0x8d/0x600
[ 1139.774399]  #1: ffff88813c1f96a0 (&tc_ht_lock_key){+.+.}-{3:3}, at: rhashtable_free_and_destroy+0x38/0x6f0
[ 1139.775822]
               stack backtrace:
[ 1139.776579] CPU: 3 PID: 5998 Comm: modprobe Not tainted 6.1.0_for_upstream_debug_2022_12_12_17_02 #1
[ 1139.777935] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 1139.779529] Call Trace:
[ 1139.779992]  <TASK>
[ 1139.780409]  dump_stack_lvl+0x57/0x7d
[ 1139.781015]  check_noncircular+0x278/0x300
[ 1139.781687]  ? print_circular_bug+0x460/0x460
[ 1139.782381]  ? rcu_read_lock_sched_held+0x3f/0x70
[ 1139.783121]  ? lock_release+0x487/0x7c0
[ 1139.783759]  ? orc_find.part.0+0x1f1/0x330
[ 1139.784423]  ? mark_lock.part.0+0xef/0x2fc0
[ 1139.785091]  __lock_acquire+0x2cf5/0x62f0
[ 1139.785754]  ? register_lock_class+0x18e0/0x18e0
[ 1139.786483]  lock_acquire+0x1c1/0x540
[ 1139.787093]  ? down_write_ref_node+0x7c/0xe0 [mlx5_core]
[ 1139.788195]  ? lockdep_hardirqs_on_prepare+0x3f0/0x3f0
[ 1139.788978]  ? register_lock_class+0x18e0/0x18e0
[ 1139.789715]  down_write+0x8e/0x1f0
[ 1139.790292]  ? down_write_ref_node+0x7c/0xe0 [mlx5_core]
[ 1139.791380]  ? down_write_killable+0x220/0x220
[ 1139.792080]  ? find_held_lock+0x2d/0x110
[ 1139.792713]  down_write_ref_node+0x7c/0xe0 [mlx5_core]
[ 1139.793795]  mlx5_del_flow_rules+0x6f/0x610 [mlx5_core]
[ 1139.794879]  __mlx5_eswitch_del_rule+0xdd/0x560 [mlx5_core]
[ 1139.796032]  ? __esw_offloads_unload_rep+0xd0/0xd0 [mlx5_core]
[ 1139.797227]  ? xa_load+0x11a/0x200
[ 1139.797800]  ? __xa_clear_mark+0xf0/0xf0
[ 1139.798438]  mlx5_eswitch_del_offloaded_rule+0x14/0x20 [mlx5_core]
[ 1139.799660]  mlx5e_tc_rule_unoffload+0x104/0x2b0 [mlx5_core]
[ 1139.800821]  mlx5e_tc_unoffload_fdb_rules+0x10c/0x1f0 [mlx5_core]
[ 1139.802049]  ? mlx5_eswitch_get_uplink_priv+0x25/0x80 [mlx5_core]
[ 1139.803260]  mlx5e_tc_del_fdb_flow+0xc3c/0xfa0 [mlx5_core]
[ 1139.804398]  ? __cancel_work_timer+0x1c2/0x3f0
[ 1139.805099]  ? mlx5e_tc_unoffload_from_slow_path+0x460/0x460 [mlx5_core]
[ 1139.806387]  mlx5e_tc_del_flow+0x146/0xa20 [mlx5_core]
[ 1139.807481]  _mlx5e_tc_del_flow+0x38/0x60 [mlx5_core]
[ 1139.808564]  rhashtable_free_and_destroy+0x3be/0x6f0
[ 1139.809336]  ? mlx5e_tc_del_flow+0xa20/0xa20 [mlx5_core]
[ 1139.809336]  ? mlx5e_tc_del_flow+0xa20/0xa20 [mlx5_core]
[ 1139.810455]  mlx5e_tc_ht_cleanup+0x1b/0x30 [mlx5_core]
[ 1139.811552]  mlx5e_cleanup_rep_tx+0x4a/0xe0 [mlx5_core]
[ 1139.812655]  mlx5e_detach_netdev+0x1ca/0x2b0 [mlx5_core]
[ 1139.813768]  mlx5e_netdev_change_profile+0xd9/0x1c0 [mlx5_core]
[ 1139.814952]  mlx5e_netdev_attach_nic_profile+0x1b/0x30 [mlx5_core]
[ 1139.816166]  mlx5e_vport_rep_unload+0x16a/0x1b0 [mlx5_core]
[ 1139.817336]  __esw_offloads_unload_rep+0xb1/0xd0 [mlx5_core]
[ 1139.818507]  mlx5_eswitch_unregister_vport_reps+0x409/0x5f0 [mlx5_core]
[ 1139.819788]  ? mlx5_eswitch_uplink_get_proto_dev+0x30/0x30 [mlx5_core]
[ 1139.821051]  ? kernfs_find_ns+0x137/0x310
[ 1139.821705]  mlx5e_rep_remove+0x62/0x80 [mlx5_core]
[ 1139.822778]  auxiliary_bus_remove+0x52/0x70
[ 1139.823449]  device_release_driver_internal+0x3c1/0x600
[ 1139.824240]  driver_detach+0xc1/0x180
[ 1139.824842]  bus_remove_driver+0xef/0x2e0
[ 1139.825504]  auxiliary_driver_unregister+0x16/0x50
[ 1139.826245]  mlx5e_rep_cleanup+0x19/0x30 [mlx5_core]
[ 1139.827322]  mlx5e_cleanup+0x12/0x30 [mlx5_core]
[ 1139.828345]  mlx5_cleanup+0xc/0x49 [mlx5_core]
[ 1139.829382]  __x64_sys_delete_module+0x2b5/0x450
[ 1139.830119]  ? module_flags+0x300/0x300
[ 1139.830750]  ? task_work_func_match+0x50/0x50
[ 1139.831440]  ? task_work_cancel+0x20/0x20
[ 1139.832088]  ? lockdep_hardirqs_on_prepare+0x273/0x3f0
[ 1139.832873]  ? syscall_enter_from_user_mode+0x1d/0x50
[ 1139.833661]  ? trace_hardirqs_on+0x2d/0x100
[ 1139.834328]  do_syscall_64+0x3d/0x90
[ 1139.834922]  entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 1139.835700] RIP: 0033:0x7f153e71288b
[ 1139.836302] Code: 73 01 c3 48 8b 0d 9d 75 0e 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 6d 75 0e 00 f7 d8 64 89 01 48
[ 1139.838866] RSP: 002b:00007ffe0a3ed938 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
[ 1139.840020] RAX: ffffffffffffffda RBX: 0000564c2cbf8220 RCX: 00007f153e71288b
[ 1139.841043] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 0000564c2cbf8288
[ 1139.842072] RBP: 0000564c2cbf8220 R08: 0000000000000000 R09: 0000000000000000
[ 1139.843094] R10: 00007f153e7a3ac0 R11: 0000000000000206 R12: 0000564c2cbf8288
[ 1139.844118] R13: 0000000000000000 R14: 0000564c2cbf7ae8 R15: 00007ffe0a3efcb8

Fixes: 9ba33339c043 ("net/mlx5e: Avoid false lock depenency warning on tc_ht")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: fix missing mutex_unlock in mlx5_fw_fatal_reporter_err_work()

Add missing mutex_unlock() before returning from
mlx5_fw_fatal_reporter_err_work().

Fixes: 9078e843efec ("net/mlx5: Avoid recovery in probe flows")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

kheaders: explicitly validate existence of cpio command

If the cpio command is not available the error emitted by
gen_kheaders.so is not clear as all output of the call to cpio is
discarded:

GNU make 4.4:

  GEN     kernel/kheaders_data.tar.xz
find: 'standard output': Broken pipe
find: write error
make[2]: *** [kernel/Makefile:157: kernel/kheaders_data.tar.xz] Error 127
make[1]: *** [scripts/Makefile.build:504: kernel] Error 2

GNU make < 4.4:

  GEN     kernel/kheaders_data.tar.xz
make[2]: *** [kernel/Makefile:157: kernel/kheaders_data.tar.xz] Error 127
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [scripts/Makefile.build:504: kernel] Error 2

Add an explicit check that will trigger a clear message about the issue:

  CHK     kernel/kheaders_data.tar.xz
./kernel/gen_kheaders.sh: line 17: type: cpio: not found

The other commands executed by gen_kheaders.sh are part of a standard
installation, so they are not checked.

Reported-by: Amy Parker <apark0006@student.cerritos.edu>
Link: https://lore.kernel.org/lkml/CAPOgqxFva=tOuh1UitCSN38+28q3BNXKq19rEsVNPRzRqKqZ+g@mail.gmail.com/
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Merge tag 'for-net-2023-01-17' of git://git./linux/kernel/git/bluetooth/bluetooth

Luiz Augusto von Dentz says:

====================
bluetooth pull request for net:

 - Fix a buffer overflow in mgmt_mesh_add
 - Fix use HCI_OP_LE_READ_BUFFER_SIZE_V2
 - Fix hci_qca shutdown on closed serdev
 - Fix possible circular locking dependencies on ISO code
 - Fix possible deadlock in rfcomm_sk_state_change

* tag 'for-net-2023-01-17' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
  Bluetooth: Fix possible deadlock in rfcomm_sk_state_change
  Bluetooth: ISO: Fix possible circular locking dependency
  Bluetooth: hci_event: Fix Invalid wait context
  Bluetooth: ISO: Fix possible circular locking dependency
  Bluetooth: hci_sync: fix memory leak in hci_update_adv_data()
  Bluetooth: hci_qca: Fix driver shutdown on closed serdev
  Bluetooth: hci_conn: Fix memory leaks
  Bluetooth: hci_sync: Fix use HCI_OP_LE_READ_BUFFER_SIZE_V2
  Bluetooth: Fix a buffer overflow in mgmt_mesh_add()
====================

Link: https://lore.kernel.org/r/20230118002944.1679845-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'for-netdev' of https://git./linux/kernel/git/bpf/bpf

Daniel Borkmann says:

====================
bpf 2023-01-16

We've added 6 non-merge commits during the last 8 day(s) which contain
a total of 6 files changed, 22 insertions(+), 24 deletions(-).

The main changes are:

1) Mitigate a Spectre v4 leak in unprivileged BPF from speculative
   pointer-as-scalar type confusion, from Luis Gerhorst.

2) Fix a splat when pid 1 attaches a BPF program that attempts to
   send killing signal to itself, from Hao Sun.

3) Fix BPF program ID information in BPF_AUDIT_UNLOAD as well as
   PERF_BPF_EVENT_PROG_UNLOAD events, from Paul Moore.

4) Fix BPF verifier warning triggered from invalid kfunc call in
   backtrack_insn, also from Hao Sun.

5) Fix potential deadlock in htab_lock_bucket from same bucket index
   but different map_locked index, from Tonghao Zhang.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  bpf: Fix pointer-leak due to insufficient speculative store bypass mitigation
  bpf: hash map, avoid deadlock with suitable hash mask
  bpf: remove the do_idr_lock parameter from bpf_prog_free_id()
  bpf: restore the ebpf program ID for BPF_AUDIT_UNLOAD and PERF_BPF_EVENT_PROG_UNLOAD
  bpf: Skip task with pid=1 in send_signal_common()
  bpf: Skip invalid kfunc call in backtrack_insn
====================

Link: https://lore.kernel.org/r/20230116230745.21742-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

MAINTAINERS: Update AMD XGBE driver maintainers

Due to other additional responsibilities Tom would no longer
be able to support AMD XGBE driver.

Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20230116085015.443127-1-Shyam-sundar.S-k@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: ipa: disable ipa interrupt during suspend

The IPA interrupt can fire when pm_runtime is disabled due to it racing
with the PM suspend/resume code. This causes a splat in the interrupt
handler when it tries to call pm_runtime_get().

Explicitly disable the interrupt in our ->suspend callback, and
re-enable it in ->resume to avoid this. If there is an interrupt pending
it will be handled after resuming. The interrupt is a wake_irq, as a
result even when disabled if it fires it will cause the system to wake
from suspend as well as cancel any suspend transition that may be in
progress. If there is an interrupt pending, the ipa_isr_thread handler
will be called after resuming.

Fixes: 1aac309d3207 ("net: ipa: use autosuspend")
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20230115175925.465918-1-caleb.connolly@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Bluetooth: Fix possible deadlock in rfcomm_sk_state_change

syzbot reports a possible deadlock in rfcomm_sk_state_change [1].
While rfcomm_sock_connect acquires the sk lock and waits for
the rfcomm lock, rfcomm_sock_release could have the rfcomm
lock and hit a deadlock for acquiring the sk lock.
Here's a simplified flow:

rfcomm_sock_connect:
  lock_sock(sk)
  rfcomm_dlc_open:
    rfcomm_lock()

rfcomm_sock_release:
  rfcomm_sock_shutdown:
    rfcomm_lock()
    __rfcomm_dlc_close:
        rfcomm_k_state_change:
  lock_sock(sk)

This patch drops the sk lock before calling rfcomm_dlc_open to
avoid the possible deadlock and holds sk's reference count to
prevent use-after-free after rfcomm_dlc_open completes.

Reported-by: syzbot+d7ce59...@syzkaller.appspotmail.com
Fixes: 1804fdf6e494 ("Bluetooth: btintel: Combine setting up MSFT extension")
Link: https://syzkaller.appspot.com/bug?extid=d7ce59b06b3eb14fd218
Signed-off-by: Ying Hsu <yinghsu@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: ISO: Fix possible circular locking dependency

This attempts to fix the following trace:

iso-tester/52 is trying to acquire lock:
ffff8880024e0070 (&hdev->lock){+.+.}-{3:3}, at:
iso_sock_listen+0x29e/0x440

but task is already holding lock:
ffff888001978130 (sk_lock-AF_BLUETOOTH-BTPROTO_ISO){+.+.}-{0:0}, at:
iso_sock_listen+0x8b/0x440

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #2 (sk_lock-AF_BLUETOOTH-BTPROTO_ISO){+.+.}-{0:0}:
       lock_acquire+0x176/0x3d0
       lock_sock_nested+0x32/0x80
       iso_connect_cfm+0x1a3/0x630
       hci_cc_le_setup_iso_path+0x195/0x340
       hci_cmd_complete_evt+0x1ae/0x500
       hci_event_packet+0x38e/0x7c0
       hci_rx_work+0x34c/0x980
       process_one_work+0x5a5/0x9a0
       worker_thread+0x89/0x6f0
       kthread+0x14e/0x180
       ret_from_fork+0x22/0x30

-> #1 (hci_cb_list_lock){+.+.}-{3:3}:
       lock_acquire+0x176/0x3d0
       __mutex_lock+0x13b/0xf50
       hci_le_remote_feat_complete_evt+0x17e/0x320
       hci_event_packet+0x38e/0x7c0
       hci_rx_work+0x34c/0x980
       process_one_work+0x5a5/0x9a0
       worker_thread+0x89/0x6f0
       kthread+0x14e/0x180
       ret_from_fork+0x22/0x30

-> #0 (&hdev->lock){+.+.}-{3:3}:
       check_prev_add+0xfc/0x1190
       __lock_acquire+0x1e27/0x2750
       lock_acquire+0x176/0x3d0
       __mutex_lock+0x13b/0xf50
       iso_sock_listen+0x29e/0x440
       __sys_listen+0xe6/0x160
       __x64_sys_listen+0x25/0x30
       do_syscall_64+0x42/0x90
       entry_SYSCALL_64_after_hwframe+0x62/0xcc

other info that might help us debug this:

Chain exists of:
  &hdev->lock --> hci_cb_list_lock --> sk_lock-AF_BLUETOOTH-BTPROTO_ISO

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(sk_lock-AF_BLUETOOTH-BTPROTO_ISO);
                               lock(hci_cb_list_lock);
                               lock(sk_lock-AF_BLUETOOTH-BTPROTO_ISO);
  lock(&hdev->lock);

 *** DEADLOCK ***

1 lock held by iso-tester/52:
 #0: ffff888001978130 (sk_lock-AF_BLUETOOTH-BTPROTO_ISO){+.+.}-{0:0}, at:
 iso_sock_listen+0x8b/0x440

Fixes: f764a6c2c1e4 ("Bluetooth: ISO: Add broadcast support")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: hci_event: Fix Invalid wait context

This fixes the following trace caused by attempting to lock
cmd_sync_work_lock while holding the rcu_read_lock:

kworker/u3:2/212 is trying to lock:
ffff888002600910 (&hdev->cmd_sync_work_lock){+.+.}-{3:3}, at:
hci_cmd_sync_queue+0xad/0x140
other info that might help us debug this:
context-{4:4}
4 locks held by kworker/u3:2/212:
 #0: ffff8880028c6530 ((wq_completion)hci0#2){+.+.}-{0:0}, at:
 process_one_work+0x4dc/0x9a0
 #1: ffff888001aafde0 ((work_completion)(&hdev->rx_work)){+.+.}-{0:0},
 at: process_one_work+0x4dc/0x9a0
 #2: ffff888002600070 (&hdev->lock){+.+.}-{3:3}, at:
 hci_cc_le_set_cig_params+0x64/0x4f0
 #3: ffffffffa5994b00 (rcu_read_lock){....}-{1:2}, at:
 hci_cc_le_set_cig_params+0x2f9/0x4f0

Fixes: 26afbd826ee3 ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: ISO: Fix possible circular locking dependency

This attempts to fix the following trace:

kworker/u3:1/184 is trying to acquire lock:
ffff888001888130 (sk_lock-AF_BLUETOOTH-BTPROTO_ISO){+.+.}-{0:0}, at:
iso_connect_cfm+0x2de/0x690

but task is already holding lock:
ffff8880028d1c20 (&conn->lock){+.+.}-{2:2}, at:
iso_connect_cfm+0x265/0x690

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 (&conn->lock){+.+.}-{2:2}:
       lock_acquire+0x176/0x3d0
       _raw_spin_lock+0x2a/0x40
       __iso_sock_close+0x1dd/0x4f0
       iso_sock_release+0xa0/0x1b0
       sock_close+0x5e/0x120
       __fput+0x102/0x410
       task_work_run+0xf1/0x160
       exit_to_user_mode_prepare+0x170/0x180
       syscall_exit_to_user_mode+0x19/0x50
       do_syscall_64+0x4e/0x90
       entry_SYSCALL_64_after_hwframe+0x62/0xcc

-> #0 (sk_lock-AF_BLUETOOTH-BTPROTO_ISO){+.+.}-{0:0}:
       check_prev_add+0xfc/0x1190
       __lock_acquire+0x1e27/0x2750
       lock_acquire+0x176/0x3d0
       lock_sock_nested+0x32/0x80
       iso_connect_cfm+0x2de/0x690
       hci_cc_le_setup_iso_path+0x195/0x340
       hci_cmd_complete_evt+0x1ae/0x500
       hci_event_packet+0x38e/0x7c0
       hci_rx_work+0x34c/0x980
       process_one_work+0x5a5/0x9a0
       worker_thread+0x89/0x6f0
       kthread+0x14e/0x180
       ret_from_fork+0x22/0x30

other info that might help us debug this:

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&conn->lock);
                               lock(sk_lock-AF_BLUETOOTH-BTPROTO_ISO);
                               lock(&conn->lock);
  lock(sk_lock-AF_BLUETOOTH-BTPROTO_ISO);

 *** DEADLOCK ***

Fixes: ccf74f2390d6 ("Bluetooth: Add BTPROTO_ISO socket type")
Fixes: f764a6c2c1e4 ("Bluetooth: ISO: Add broadcast support")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: hci_sync: fix memory leak in hci_update_adv_data()

When hci_cmd_sync_queue() failed in hci_update_adv_data(), inst_ptr is
not freed, which will cause memory leak, convert to use ERR_PTR/PTR_ERR
to pass the instance to callback so no memory needs to be allocated.

Fixes: 651cd3d65b0f ("Bluetooth: convert hci_update_adv_data to hci_sync")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: hci_qca: Fix driver shutdown on closed serdev

The driver shutdown callback (which sends EDL_SOC_RESET to the device
over serdev) should not be invoked when HCI device is not open (e.g. if
hci_dev_open_sync() failed), because the serdev and its TTY are not open
either.  Also skip this step if device is powered off
(qca_power_shutdown()).

The shutdown callback causes use-after-free during system reboot with
Qualcomm Atheros Bluetooth:

  Unable to handle kernel paging request at virtual address
  0072662f67726fd7
  ...
  CPU: 6 PID: 1 Comm: systemd-shutdow Tainted: G        W
  6.1.0-rt5-00325-g8a5f56bcfcca #8
  Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT)
  Call trace:
   tty_driver_flush_buffer+0x4/0x30
   serdev_device_write_flush+0x24/0x34
   qca_serdev_shutdown+0x80/0x130 [hci_uart]
   device_shutdown+0x15c/0x260
   kernel_restart+0x48/0xac

KASAN report:

  BUG: KASAN: use-after-free in tty_driver_flush_buffer+0x1c/0x50
  Read of size 8 at addr ffff16270c2e0018 by task systemd-shutdow/1

  CPU: 7 PID: 1 Comm: systemd-shutdow Not tainted
  6.1.0-next-20221220-00014-gb85aaf97fb01-dirty #28
  Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT)
  Call trace:
   dump_backtrace.part.0+0xdc/0xf0
   show_stack+0x18/0x30
   dump_stack_lvl+0x68/0x84
   print_report+0x188/0x488
   kasan_report+0xa4/0xf0
   __asan_load8+0x80/0xac
   tty_driver_flush_buffer+0x1c/0x50
   ttyport_write_flush+0x34/0x44
   serdev_device_write_flush+0x48/0x60
   qca_serdev_shutdown+0x124/0x274
   device_shutdown+0x1e8/0x350
   kernel_restart+0x48/0xb0
   __do_sys_reboot+0x244/0x2d0
   __arm64_sys_reboot+0x54/0x70
   invoke_syscall+0x60/0x190
   el0_svc_common.constprop.0+0x7c/0x160
   do_el0_svc+0x44/0xf0
   el0_svc+0x2c/0x6c
   el0t_64_sync_handler+0xbc/0x140
   el0t_64_sync+0x190/0x194

Fixes: 7e7bbddd029b ("Bluetooth: hci_qca: Fix qca6390 enable failure after warm reboot")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: hci_conn: Fix memory leaks

When hci_cmd_sync_queue() failed in hci_le_terminate_big() or
hci_le_big_terminate(), the memory pointed by variable d is not freed,
which will cause memory leak. Add release process to error path.

Fixes: eca0ae4aea66 ("Bluetooth: Add initial implementation of BIS connections")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: hci_sync: Fix use HCI_OP_LE_READ_BUFFER_SIZE_V2

Don't try to use HCI_OP_LE_READ_BUFFER_SIZE_V2 if controller don't
support ISO channels, but in order to check if ISO channels are
supported HCI_OP_LE_READ_LOCAL_FEATURES needs to be done earlier so the
features bits can be checked on hci_le_read_buffer_size_sync.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=216817
Fixes: c1631dbc00c1 ("Bluetooth: hci_sync: Fix hci_read_buffer_size_sync")
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: Fix a buffer overflow in mgmt_mesh_add()

Smatch Warning:
net/bluetooth/mgmt_util.c:375 mgmt_mesh_add() error: __memcpy()
'mesh_tx->param' too small (48 vs 50)

Analysis:

'mesh_tx->param' is array of size 48. This is the destination.
u8 param[sizeof(struct mgmt_cp_mesh_send) + 29]; // 19 + 29 = 48.

But in the caller 'mesh_send' we reject only when len > 50.
len > (MGMT_MESH_SEND_SIZE + 31) // 19 + 31 = 50.

Fixes: b338d91703fa ("Bluetooth: Implement support for Mesh")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Brian Gix <brian.gix@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

netfilter: conntrack: handle tcp challenge acks during connection reuse

When a connection is re-used, following can happen:
[ connection starts to close, fin sent in either direction ]
 > syn   # initator quickly reuses connection
 < ack   # peer sends a challenge ack
 > rst   # rst, sequence number == ack_seq of previous challenge ack
 > syn   # this syn is expected to pass

Problem is that the rst will fail window validation, so it gets
tagged as invalid.

If ruleset drops such packets, we get repeated syn-retransmits until
initator gives up or peer starts responding with syn/ack.

Before the commit indicated in the "Fixes" tag below this used to work:

The challenge-ack made conntrack re-init state based on the challenge
ack itself, so the following rst would pass window validation.

Add challenge-ack support: If we get ack for syn, record the ack_seq,
and then check if the rst sequence number matches the last ack number
seen in reverse direction.

Fixes: c7aab4f17021 ("netfilter: nf_conntrack_tcp: re-init for syn packets only")
Reported-by: Michal Tesar <mtesar@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources

To pick the changes in:

  8aff460f216753d8 ("KVM: x86: Add a VALID_MASK for the flags in kvm_msr_filter_range")
  c1340fe3590ebbe7 ("KVM: x86: Add a VALID_MASK for the flag in kvm_msr_filter")
  be83794210e7020f ("KVM: x86: Disallow the use of KVM_MSR_FILTER_DEFAULT_ALLOW in the kernel")

That just rebuilds kvm-stat.c on x86, no change in functionality.

This silences these perf build warning:

  Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/kvm.h' differs from latest version at 'arch/x86/include/uapi/asm/kvm.h'
  diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h

Cc: Aaron Lewis <aaronlewis@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: http://lore.kernel.org/lkml/Y8VR5wSAkd2A0HxS@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tools headers UAPI: Sync linux/kvm.h with the kernel sources

To pick the changes in:

  b0305c1e0e27ad91 ("KVM: x86/xen: Add KVM_XEN_INVALID_GPA and KVM_XEN_INVALID_GFN to uapi")

That just rebuilds perf, as these patches don't add any new KVM ioctl to
be harvested for the the 'perf trace' ioctl syscall argument
beautifiers.

This silences this perf build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
  diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: http://lore.kernel.org/lkml/Y7Loj5slB908QSXf@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

staging: vchiq_arm: fix enum vchiq_status return types

gcc-13 notices a type mismatch between function declaration
and definition for a few functions that have been converted
from returning vchiq specific status values to regular error
codes:

drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c:662:5: error: conflicting types for 'vchiq_initialise' due to enum/integer mismatch; have 'int(struct vchiq_instance **)' [-Werror=enum-int-mismatch]
drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c:1411:1: error: conflicting types for 'vchiq_use_internal' due to enum/integer mismatch; have 'int(struct vchiq_state *, struct vchiq_service *, enum USE_TYPE_E)' [-Werror=enum-int-mismatch]
drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c:1468:1: error: conflicting types for 'vchiq_release_internal' due to enum/integer mismatch; have 'int(struct vchiq_state *, struct vchiq_service *)' [-Werror=enum-int-mismatch]

Change the declarations to match the actual function definition.

Fixes: a9fbd828be7f ("staging: vchiq_arm: drop enum vchiq_status from vchiq_*_internal")
Cc: stable <stable@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230117163957.1109872-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390: workaround invalid gcc-11 out of bounds read warning

GCC 11.1.0 and 11.2.0 generate a wrong warning when compiling the
kernel e.g. with allmodconfig:

arch/s390/kernel/setup.c: In function ‘setup_lowcore_dat_on’:
./include/linux/fortify-string.h:57:33: error: ‘__builtin_memcpy’ reading 128 bytes from a region of size 0 [-Werror=stringop-overread]
...
arch/s390/kernel/setup.c:526:9: note: in expansion of macro ‘memcpy’
  526 |         memcpy(abs_lc->cregs_save_area, S390_lowcore.cregs_save_area,
      |         ^~~~~~

This could be addressed by using absolute_pointer() with the
S390_lowcore macro, but this is not a good idea since this generates
worse code for performance critical paths.

Therefore simply use a for loop to copy the array in question and get
rid of the warning.

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

Merge tag 'nfsd-6.2-4' of git://git./linux/kernel/git/cel/linux

Pull nfsd fixes from Chuck Lever:

 - Fix recently introduced use-after-free bugs

* tag 'nfsd-6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  NFSD: replace delayed_work with work_struct for nfsd_client_shrinker
  NFSD: register/unregister of nfsd-client shrinker at nfsd startup/shutdown time
  NFSD: fix use-after-free in nfsd4_ssc_setup_dul()

Merge tag 'tomoyo-pr-20230117' of git://git.osdn.net/gitroot/tomoyo/tomoyo-test1

Pull tomoyo fixes from Tetsuo Handa:
 "Makefile and Kconfig updates for TOMOYO"

* tag 'tomoyo-pr-20230117' of git://git.osdn.net/gitroot/tomoyo/tomoyo-test1:
  tomoyo: Update website link
  tomoyo: Remove "select SRCU"
  tomoyo: Omit use of bin2c
  tomoyo: avoid unneeded creation of builtin-policy.h
  tomoyo: fix broken dependency on *.conf.default

block: fix hctx checks for batch allocation

When there are no read queues read requests will be assigned a
default queue on allocation. However, blk_mq_get_cached_request() is not
prepared for that and will fail all attempts to grab read requests from
the cache. Worst case it doubles the number of requests allocated,
roughly half of which will be returned by blk_mq_free_plug_rqs().

It only affects batched allocations and so is io_uring specific.
For reference, QD8 t/io_uring benchmark improves by 20-35%.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/80d4511011d7d4751b4cf6375c4e38f237d935e3.1673955390.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

usb: core: hub: disable autosuspend for TI TUSB8041

The Texas Instruments TUSB8041 has an autosuspend problem at high
temperature.

If there is not USB traffic, after a couple of ms, the device enters in
autosuspend mode. In this condition the external clock stops working, to
save energy. When the USB activity turns on, ther hub exits the
autosuspend state, the clock starts running again and all works fine.

At ambient temperature all works correctly, but at high temperature,
when the USB activity turns on, the external clock doesn't restart and
the hub disappears from the USB bus.

Disabling the autosuspend mode for this hub solves the issue.

Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
Cc: stable <stable@kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20221219124759.3207032-1-f.suligoi@asem.it
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: fix misleading usb_set_intfdata() kernel doc

The struct device driver-data pointer is used for any data that a driver
may need in various callbacks while bound to the device. For
convenience, subsystems typically provide wrappers such as
usb_set_intfdata() of the generic accessor functions for use in bus
callbacks.

There is generally no longer any need for a driver to clear the pointer,
but since commit 0998d0631001 ("device-core: Ensure drvdata = NULL when
no driver is bound") the driver-data pointer is set to NULL by driver
core post unbind anyway.

For historical reasons, USB core also clears this pointer when an
explicitly claimed interface is released.

Due to a misunderstanding, a misleading kernel doc comment for
usb_set_intfdata() was recently added which claimed that the driver data
pointer must not be cleared during disconnect before "all actions [are]
completed", which is both imprecise and incorrect.

Specifically, drivers like cdc-acm which claim additional interfaces use
the driver-data pointer as a flag which is cleared when the first
interface is unbound. As long as a driver does not do something odd like
dereference the pointer in, for example, completion callbacks, this can
be done at any time during disconnect. And in any case this is no
different than for any other resource, like the driver data itself,
which may be freed by the disconnect callback.

Note that the comment actually also claimed that the interface itself
was somehow being set to NULL by driver core.

Fix the kernel doc by removing incorrect, overly specific and misleading
details and adding a comment about why some drivers do clear the
driver-data pointer.

Fixes: 27ef17849779 ("usb: add usb_set_intfdata() documentation")
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/r/20221212152035.31806-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>