drm/sun4i: dsi: Handle bus clock via regmap_mmio_attach_clk

regmap has special API to enable the controller bus clock while
initializing register space, and current driver is using
devm_regmap_init_mmio_clk which require to specify bus
clk_id argument as "bus"

But, the usage of clocks are varies between different Allwinner
DSI controllers. Clocking in A33 would need bus and mod clocks
where as A64 would need only bus clock.

Since A64 support only single bus clock, it is optional to
specify the clock-names on the controller device tree node.
So using NULL on clk_id would get the attached clock.

To support clk_id as "bus" and "NULL" during clock enablement
between controllers, this patch add generic code to handle
the bus clock using regmap_mmio_attach_clk with associated
regmap APIs.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20191222132229.30276-5-jagan@amarulasolutions.com

drm/sun4i: dsi: Get the mod clock for A31

As per the user manual, look like mod clock is not mandatory
for all Allwinner MIPI DSI controllers, it is connected to
CLK_DSI_SCLK for A31 and not available in A64.

So, add compatible check for A31 and get mod clock accordingly.

Tested-by: Merlijn Wajer <merlijn@wizzup.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20191222132229.30276-4-jagan@amarulasolutions.com

dt-bindings: sun6i-dsi: Add A64 DPHY compatible (w/ A31 fallback)

The MIPI DSI PHY controller on Allwinner A64 is similar
on the one on A31.

Add A64 compatible and append A31 compatible as fallback.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20191222132229.30276-3-jagan@amarulasolutions.com

dt-bindings: sun6i-dsi: Document A64 MIPI-DSI controller

The MIPI DSI controller in Allwinner A64 is similar to A33.

But unlike A33, A64 doesn't have DSI_SCLK gating so it is valid
to have separate compatible for A64 on the same driver.

DSI_SCLK uses mod clock-names on dt-bindings, so the same
is not required for A64.

On that note
- A64 require minimum of 1 clock like the bus clock
- A33 require minimum of 2 clocks like both bus, mod clocks

So, update dt-bindings so-that it can document both A33,
A64 bindings requirements.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20191222132229.30276-2-jagan@amarulasolutions.com

drm: sun4i: Add support for suspending the display driver

Shut down the display engine during suspend.

Signed-off-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20191029112846.3604925-1-megous@megous.com

drm/atomic: Spell CRTC consistently

CRTC is an abbreviation and should be all caps in prose. Update all
kerneldoc comments to use a consistent spelling.

v2: remove hunk unrelated to the CRTC spelling fixes

Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191206135336.2084564-2-thierry.reding@gmail.com

drm: Fix a couple of typos, punctation and whitespace issues

These are just a couple of things that I came across as I was reading
through the code and comments.

v2: added one more hunk that ended up in the wrong patch

Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191206135336.2084564-1-thierry.reding@gmail.com

drm/stm: ltdc: move pinctrl to encoder mode set

The pin control must be set to default as soon as possible to
establish a good video link between tv & bridge hdmi
(encoder mode set is call before encoder enable).

Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1574850218-13257-1-git-send-email-yannick.fertre@st.com

drm/todo: Updating logging todo

Jani has merged a new set of logging functions, which we hope to be
the One True solution now, pinky promises:

commit fb6c7ab8718eb2543695d77ad8302ff81e8e1e32
Author: Jani Nikula <jani.nikula@intel.com>
Date:   Tue Dec 10 14:30:43 2019 +0200

    drm/print: introduce new struct drm_device based logging macros

Update the todo entry to match the new preference.

v2: Fix spelling issue Sam noticed.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Wambui Karuga <wambui.karugax@gmail.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191219161722.2779994-1-daniel.vetter@ffwll.ch

drm/gma500: fix null dereference of pointer fb before null check

Pointer fb is being dereferenced when assigning dev before it
is null checked.  Fix this by only dereferencing dev after the
null check.

Fixes: 6b7ce2c4161a ("drm/gma500: Remove struct psb_fbdev")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191216162136.270114-1-colin.king@canonical.com

drm/gem-fb-helper: convert to drm device based logging

Prefer drm_dbg_kms() and drm_err() over all other logging.

Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210123050.8799-4-jani.nikula@intel.com

drm/fb-helper: convert to drm device based logging

Prefer drm_dbg_kms(), drm_info(), and drm_err() over all other
logging. This is about KMS so switch to the KMS category while at it.

Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210123050.8799-3-jani.nikula@intel.com

drm/client: convert to drm device based logging

Prefer drm_dbg_kms() and drm_err() over DRM_DEV_DEBUG_KMS() and
DRM_DEV_ERROR().

Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210123050.8799-2-jani.nikula@intel.com

drm/virtio: move drm_connector_to_virtio_gpu_output to virtgpu_display

That's the only file that uses it.

Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20191219005733.18960-6-gurchetansingh@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/virtio: move to_virtio_fence inside virtgpu_fence

That's the only file that uses it.

Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20191219005733.18960-5-gurchetansingh@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/virtio: simplify getting fake offset

This is a little simpler.

Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20191219005733.18960-4-gurchetansingh@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/virtio: get rid of drm_encoder_to_virtio_gpu_output

Not used anywhere.

Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20191219005733.18960-3-gurchetansingh@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/virtio: static-ify virtio_gpu_framebuffer_init

Not used anywhere else.

Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20191219005733.18960-2-gurchetansingh@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/virtio: static-ify virtio_fence_signaled

Not used anywhere else.

Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20191219005733.18960-1-gurchetansingh@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

dt-bindings: display: bridge: lvds-codec: Absorb thine, thc63lvdm83d.txt

At this point in time, compatible string "thine,thc63lvdm83d" is
backed by the lvds-codec driver, and the documentation contained
in thine,thc63lvdm83d.txt is basically the same as the one
contained in lvds-codec.yaml (generic fallback compatible string
aside), therefore absorb thine,thc63lvdm83d.txt.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/

dt-bindings: display: bridge: lvds-codec: Document ti, ds90cf384a

The DS90CF384A from TI is a transparent LVDS receiver (decoder),
and therefore it is compatible with the lvds-codec driver and
bindings.

Document the ti,ds90cf384a compatible string with the dt-bindings.
No driver change required.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1573660292-10629-10-git-send-email-fabrizio.castro@bp.renesas.com

dt-bindings: display: bridge: Repurpose lvds-encoder

In an effort to repurpose lvds-encoder.c to also serve the
function of LVDS decoders, we ended up defining a new "generic"
compatible string ("lvds-decoder"), therefore adapt the dt schema
to allow for the new compatible string.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[narmstrong: fixed port descriptions as acked with lpinchart]
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1573660292-10629-9-git-send-email-fabrizio.castro@bp.renesas.com

drm/bridge: lvds-codec: Simplify panel DT node localisation

The probe function needs to get ahold of the panel device tree
node, and it achieves that by using a combination of
of_graph_get_port_by_id, of_get_child_by_name, and
of_graph_get_remote_port_parent. We can achieve the same goal
by replacing those calls with a call to of_graph_get_remote_node
these days.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1573660292-10629-8-git-send-email-fabrizio.castro@bp.renesas.com

drm/bridge: lvds-codec: Add "lvds-decoder" support

Add support for transparent LVDS decoders by adding a new
compatible string ("lvds-decoder") to the driver.
This patch also adds member connector_type to struct lvds_codec,
and that's because LVDS decoders have a different connector type
from LVDS encoders. We fill this new member up with the data
matching the compatible string.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Fix pointer to int cast warning]
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191217230753.2999-1-laurent.pinchart+renesas@ideasonboard.com

drm/bridge: Repurpose lvds-encoder.c

lvds-encoder.c implementation is also suitable for LVDS decoders,
not just LVDS encoders.
Instead of creating a new driver for addressing support for
transparent LVDS decoders, repurpose lvds-encoder.c for the greater
good with this patch.

This patch only "rebrands" the lvds-encoder.c driver, to make it
suitable for hosting LVDS decoders support. The actual support for
LVDS decoders will come with a later patch.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1573660292-10629-6-git-send-email-fabrizio.castro@bp.renesas.com

dt-bindings: display: bridge: lvds-transmitter: Document "ti, sn75lvds83"

Compatible string "ti,sn75lvds83" is being used by device tree
rk3188-bqedison2qc.dts, but it's not documented anywhere, therefore
document it within lvds-transmitter.yaml.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1573660292-10629-5-git-send-email-fabrizio.castro@bp.renesas.com

dt-bindings: display: bridge: lvds-transmitter: Absorb ti, ds90c185.txt

ti,ds90c185.txt documents LVDS encoders using the same driver
as the one documented by lvds-transmitter.yaml.
Since the properties listed in ti,ds90c185.txt are the same
as the ones listed in lvds-transmitter.yaml, absorb the dt-binding
into lvds-transmitter.yaml.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1573660292-10629-4-git-send-email-fabrizio.castro@bp.renesas.com

dt-bindings: display: bridge: lvds-transmitter: Document powerdown-gpios

Add documentation for property powerdown-gpios. The property is
optional.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1573660292-10629-3-git-send-email-fabrizio.castro@bp.renesas.com

dt-bindings: display: bridge: Convert lvds-transmitter binding to json-schema

Convert the lvds-transmitter binding to DT schema format using
json-schema.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1573660292-10629-2-git-send-email-fabrizio.castro@bp.renesas.com

udmabuf: fix dma-buf cpu access

I'm just going to put Chia's review comment here since it sums
the issue rather nicely:

"(1) Semantically, a dma-buf is in DMA domain.  CPU access from the
importer must be surrounded by {begin,end}_cpu_access.  This gives the
exporter a chance to move the buffer to the CPU domain temporarily.

(2) When the exporter itself has other means to do CPU access, it is
only reasonable for the exporter to move the buffer to the CPU domain
before access, and to the DMA domain after access.  The exporter can
potentially reuse {begin,end}_cpu_access for that purpose.

Because of (1), udmabuf does need to implement the
{begin,end}_cpu_access hooks.  But "begin" should mean
dma_sync_sg_for_cpu and "end" should mean dma_sync_sg_for_device.

Because of (2), if userspace wants to continuing accessing through the
memfd mapping, it should call udmabuf's {begin,end}_cpu_access to
avoid cache issues."

Reported-by: Chia-I Wu <olvaffe@gmail.com>
Suggested-by: Chia-I Wu <olvaffe@gmail.com>
Fixes: 284562e1f348 ("udmabuf: implement begin_cpu_access/end_cpu_access hooks")
Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20191217230228.453-1-gurchetansingh@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/mcde: Some fixes to handling video mode

The video DSI mode had not really been tested. These fixes makes
it more likely to work on real hardware:
- Put the active width (x width) in the right bits and the VSA
  (vertical sync active) in the right bits (those were swapped).
- Calculate the packet sizes in bytes as in the vendor driver,
  rather than in bits. Test the calculations agains a
  spreadsheet and confirmed by debug prints to be reasonable.
- Also verified the register values with relative confidence
  to register dumps from the Samsung GT-I8190 boot loader
  graphics. We are not identical but not off by far either.
- Error out if the current mode and refresh frequency doesn't
  work out. (In the future we may simply want to scale down
  the vrefresh.)
- Handle negative result in front/back/sync packages and fall
  back to zero like in the vendor driver.
- Put in lots of clarifying comments and references to the
  documentation where the code is hard to understand.
- Set the DSI_VID_VCA_SETTING2 field
  DSI_VID_VCA_SETTING2_MAX_LINE_LIMIT to blkline_pck - 6 as in
  the vendor driver and mask the field properly.
- Set the DSI_VID_VCA_SETTING1 field
  DSI_VID_VCA_SETTING1_MAX_BURST_LIMIT to blkeol_pck - 6 to
  blkeol_duration - 6 as in the vendor driver.

Cc: Stephan Gerhold <stephan@gerhold.net>
Fixes: 5fc537bfd000 ("drm/mcde: Add new driver for ST-Ericsson MCDE")
Link: https://patchwork.freedesktop.org/patch/msgid/20191217150959.17215-1-linus.walleij@linaro.org
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

drm/drm_panel: Fix EXPORT of drm_panel_of_backlight() one more time

The initial commit followed by the fix didn't
take into consideration the case:

CONFIG_DRM_PANEL=y
CONFIG_BACKLIGHT_CLASS_DEVICE=m
CONFIG_DRM_I915=y

where symbol devm_of_find_backlight() is not reachable from DRM subsystem.
Quick fix is to avoid drm_panel_of_backlight() from exporting in such case.

Fixes: 907aa265fde6 ("drm/drm_panel: fix EXPORT of drm_panel_of_backlight")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191217140721.42432-1-andriy.shevchenko@linux.intel.com

dma-heap: Make the symbol 'dma_heap_ioctl_cmds' static

Fix the following sparse warning.

drivers/dma-buf/dma-heap.c:109:14: warning: symbol 'dma_heap_ioctl_cmds'
was not declared. Should it be static?

Acked-by: Andrew F. Davis <afd@ti.com>
Acked-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
 [sumits: rebased over IOCTL rename patches]
Link: https://patchwork.freedesktop.org/patch/msgid/20191217190822.1969-1-sumit.semwal@linaro.org

dma-buf: fix resource leak on -ENOTTY error return path

The -ENOTTY error return path does not free the allocated
kdata as it returns directly. Fix this by returning via the
error handling label err.

Addresses-Coverity: ("Resource leak")
Fixes: c02a81fba74f ("dma-buf: Add dma-buf heaps framework")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191216161059.269492-1-colin.king@canonical.com

drm: remove duplicate check on parent and avoid BUG_ON

In drm_dev_init, parent is checked for NULL via assert after
checked in devm_drm_dev_init(). The patch removes the duplicate
check and replaces the assertion with WARN_ON. Further, it returns
-EINVAL consistent with the usage in devm_drm_dev_init.

Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191215194345.4679-1-pakki001@umn.edu

drm/mediatek: plane_state->fb iff plane_state->crtc

Checking both is one too much, so wrap a WARN_ON around it to stope
the copypasta.

Acked-by: CK Hu <ck.hu@mediatek.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
Link: https://patchwork.freedesktop.org/patch/msgid/20191213172612.1514842-5-daniel.vetter@ffwll.ch

drm/malidp: plane_state->fb iff plane_state->crtc

Checking both is one too much, so wrap a WARN_ON around it to stope
the copypasta.

Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191213172612.1514842-2-daniel.vetter@ffwll.ch

drm/etnaviv: Use dma_resv locking wrappers

I'll add more fancy logic to them soon, so everyone really has to use
them. Plus they already provide some nice additional debug
infrastructure on top of direct ww_mutex usage for the fences tracked
by dma_resv.

v2: Fix the lost _interruptible (Michael)

Acked-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Russell King <linux+etnaviv@armlinux.org.uk>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: etnaviv@lists.freedesktop.org
Cc: "Ruhl, Michael J" <michael.j.ruhl@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191214000927.1616384-1-daniel.vetter@ffwll.ch

drm/vc4: Use dma_resv locking wrappers

I'll add more fancy logic to them soon, so everyone really has to use
them. Plus they already provide some nice additional debug
infrastructure on top of direct ww_mutex usage for the fences tracked
by dma_resv.

Reviewed-by: Eric Anholt <eric@anholt.net>
Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191125094356.161941-5-daniel.vetter@ffwll.ch

drm/msm: Use dma_resv locking wrappers

I'll add more fancy logic to them soon, so everyone really has to use
them. Plus they already provide some nice additional debug
infrastructure on top of direct ww_mutex usage for the fences tracked
by dma_resv.

Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20191125094356.161941-4-daniel.vetter@ffwll.ch

dma-buf: heaps: Remove redundant heap identifier from system heap name

The heaps are already in a directory of heaps, adding _heap to a heap
name is redundant. This patch is only a name change, no logic is changed.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Acked-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191216133405.1001-3-afd@ti.com

dma-buf: heaps: Use _IOCTL_ for userspace IOCTL identifier

This is more consistent with the DMA and DRM frameworks convention. This
patch is only a name change, no logic is changed.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Acked-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191216133405.1001-2-afd@ti.com

drm/print: introduce new struct drm_device based logging macros

Add new struct drm_device based logging macros modeled after the core
kernel device based logging macros. These would be preferred over the
drm printk and struct device based macros in drm code, where possible.

We have existing drm specific struct device based logging functions, but
they are too verbose to use for two main reasons:

 * The names are unnecessarily long, for example DRM_DEV_DEBUG_KMS().

 * The use of struct device over struct drm_device is too generic for
   most users, leading to an extra dereference.

For example:

DRM_DEV_DEBUG_KMS(drm->dev, "Hello, world\n");

vs.

drm_dbg_kms(drm, "Hello, world\n");

It's a matter of taste, but the SHOUTING UPPERCASE has been argued to be
less readable than lowercase.

Some names are changed from old DRM names to be based on the core kernel
logging functions. For example, NOTE -> notice, ERROR -> err, DEBUG ->
dbg.

Due to the conflation of DRM_DEBUG and DRM_DEBUG_DRIVER macro use
(DRM_DEBUG is used widely in drivers though it's supposed to be a core
debugging category), they are named as drm_dbg_core and drm_dbg,
respectively.

The drm_err and _once/_ratelimited variants no longer include the
function name in order to be able to use the core device based logging
macros. Arguably this is not a significant change; error messages should
not be so common to be only distinguishable by the function name.

Ratelimited debug logging macros are to be added later.

Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Sean Paul <sean@poorly.run>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210123050.8799-1-jani.nikula@intel.com

drm/edid: Make sure the CEA mode arrays have the correct amount of modes

We depend on a specific relationship between the VIC number and the
index in the CEA mode arrays. Assert that the arrays have the expected
size to make sure we've not accidentally left holes in them.

v2: Pimp the BUILD_BUG_ON()s
v3: Fix typos (Manasi)

Cc: Hans Verkuil <hansverk@cisco.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Thomas Anderson <thomasanderson@google.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191213174348.27261-5-ville.syrjala@linux.intel.com

drm/edid: Throw away the dummy VIC 0 cea mode

Now that the cea mode handling is not 100% tied to the single
array the dummy VIC 0 mode is pretty much pointles. Throw it
out.

v2: Rebase

Cc: Tom Anderson <thomasanderson@google.com>
Cc: Hans Verkuil <hansverk@cisco.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191213174348.27261-4-ville.syrjala@linux.intel.com
Reviewed-by: Thomas Anderson <thomasanderson@google.com>

drm/edid: Add CTA-861-G modes with VIC >= 193

Add a second table to the cea modes with VIC >= 193.

v2: Improve the comment for cea_modes_*[] to indicate
    that one should always use cea_mode_for_vic() (Tom)

Cc: Hans Verkuil <hansverk@cisco.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Thomas Anderson <thomasanderson@google.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191213174348.27261-3-ville.syrjala@linux.intel.com

drm/edid: Abstract away cea_edid_modes[]

We're going to need two cea mode tables (one for VICs < 128,
another one for VICs >= 193). To that end replace the direct
edid_cea_modes[] lookups with a function call. And we'll rename
the array to edid_cea_modes_0[] to indicate how it's to be
indexed.

v2: Fix typos (Tom)
    Drop the pointless NULL checks in the loops (Tom)
    Assign when declaring (Tom)
    Improve the comment for cea_modes_*[] to indicate
    that one should always use cea_mode_for_vic() (Tom)

Cc: Tom Anderson <thomasanderson@google.com>
Cc: Hans Verkuil <hansverk@cisco.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191213174348.27261-2-ville.syrjala@linux.intel.com
Reviewed-by: Thomas Anderson <thomasanderson@google.com>

drm/virtio: use damage info for display updates.

v2: remove shift by src_{x,y}, drm_atomic_helper_damage_merged()
    handles that for us (Chia-I Wu).

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20191212125346.8334-4-kraxel@redhat.com

drm/virtio: batch display update commands.

When the driver submits multiple commands in a row it makes sense to
notify the host only after submitting the last one, so the host can
process them all at once, with a single vmexit.

Add functions to enable/disable notifications to allow that.  Use the
new functions for primary plane updates.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20191212125346.8334-3-kraxel@redhat.com

drm/virtio: skip set_scanout if framebuffer didn't change

v2: also check src rect (Chia-I Wu).

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20191212125346.8334-2-kraxel@redhat.com

drm/virtio: plane_state->fb iff plane_state->crtc

Checking both is one too much, so wrap a WARN_ON around it to stope
the copypasta.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20191213172612.1514842-8-daniel.vetter@ffwll.ch
Cc: David Airlie <airlied@linux.ie>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: virtualization@lists.linux-foundation.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/bochs: Remove unneeded semicolon

Fixes coccicheck warning:

drivers/gpu/drm/bochs/bochs_hw.c:258:2-3: Unneeded semicolon

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1576468459-67216-1-git-send-email-zhengbin13@huawei.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/modes: parse_cmdline: Explicitly memset the passed in drm_cmdline_mode struct

Instead of only setting mode->specified on false on an early exit and
leaving e.g. mode->bpp_specified and mode->refresh_specified as is,
lets be consistent and just zero out the entire passed in struct at
the top of drm_mode_parse_command_line_for_connector()

Changes in v3:
-Drop "mode->specified = false;" line instead of the "return false;" (oops)
 This crasher was reported-by: kernel test robot <lkp@intel.com>

Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191118155134.30468-11-hdegoede@redhat.com

drm/modes: parse_cmdline: Remove some unnecessary code (v2)

fb_get_options() will return fb_mode_option if no video=<connector-name>
argument is present on the kernel commandline, so there is no need to also
do this in drm_mode_parse_command_line_for_connector() as our only caller
uses fb_get_options() to get the mode_option argument.

Changes in v2:
-Split out the changes dealing with the initialization of the mode struct
 into a separate patch

Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191118155134.30468-10-hdegoede@redhat.com

drm/modes: parse_cmdline: Add support for specifying panel_orientation (v2)

Sometimes we want to override a connector's panel_orientation from the
kernel commandline. Either for testing and for special cases, e.g. a kiosk
like setup which uses a TV mounted in portrait mode.

Users can already specify a "rotate" option through a video= kernel cmdline
option. But that only supports 0/180 degrees (see drm_client_modeset TODO)
and only works for in kernel modeset clients, not for userspace kms users.

The "panel-orientation" connector property OTOH does support 90/270 degrees
as it leaves dealing with the rotation up to userspace and this does work
for userspace kms clients (at least those which support this property).

Changes in v2:
-Add missing ':' after @panel_orientation (reported by kbuild test robot)

BugLink: https://gitlab.freedesktop.org/plymouth/plymouth/merge_requests/83
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191118155134.30468-9-hdegoede@redhat.com

drm/modes: parse_cmdline: Allow specifying stand-alone options

Some options which can be specified on the commandline, such as
margin_right=..., margin_left=..., etc. are applied not only to the
specified mode, but to all modes. As such it would be nice if the user
can simply say e.g.
video=HDMI-1:margin_right=14,margin_left=24,margin_bottom=36,margin_top=42

This commit refactors drm_mode_parse_command_line_for_connector() to
add support for this, and as a nice side effect also cleans up the
function a bit.

Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191118155134.30468-8-hdegoede@redhat.com

drm/modes: parse_cmdline: Set bpp/refresh_specified after successful parsing

drm_connector_get_cmdline_mode() calls
drm_mode_parse_command_line_for_connector() with &connector->cmdline_mode
as mode argument, so anything which we store in the mode arguments gets
kept even if we return false.

Avoid storing a possibly false-postive bpp/refresh_specified setting
in connector->cmdline_mode by moving the setting of these to after
successful parsing of the bpp/refresh parts of the video= argument.

Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191118155134.30468-7-hdegoede@redhat.com

drm/modes: parse_cmdline: Add freestanding argument to drm_mode_parse_cmdline_options()

Add a freestanding function argument to drm_mode_parse_cmdline_options()
similar to how drm_mode_parse_cmdline_extra() already has this.

This is a preparation patch for allowing parsing of stand-alone options
without a mode before them, e.g.: video=HDMI-1:margin_right=14,...

Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191118155134.30468-6-hdegoede@redhat.com

drm/modes: parse_cmdline: Rework drm_mode_parse_cmdline_options()

Refactor drm_mode_parse_cmdline_options() so that it takes a pointer
to the first option, rather then a pointer to the ',' before the first
option.

This is a preparation patch for allowing parsing of stand-alone options
without a mode before them, e.g.: video=HDMI-1:margin_right=14,...

Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191118155134.30468-5-hdegoede@redhat.com

drm/modes: parse_cmdline: Accept extras directly after mode combined with options

Before this commit it was impossible to combine an extra mode argument
specified directly after the resolution with an option, e.g.
video=HDMI-1:720x480e,rotate=180 would not work, either the "e" to force
enable would need to be dropped or the ",rotate=180", otherwise the
mode_option would not be accepted.

This commit fixes this by setting parse_extras to true in this case, so
that drm_mode_parse_cmdline_res_mode() parses the extra arguments directly
after the resolution.

Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191118155134.30468-4-hdegoede@redhat.com

drm/modes: parse_cmdline: Stop parsing extras after bpp / refresh at ', '

Before this commit it was impossible to add an extra mode argument after
a bpp or refresh specifier, combined with an option, e.g.
video=HDMI-1:720x480-24e,rotate=180 would not work, either the "e" to
force enable would need to be dropped or the ",rotate=180", otherwise
the mode_option would not be accepted.

This commit fixes this by fixing the length calculation if extras_ptr
is set to stop the extra parsing at the start of the options (stop at the
',' options_ptr points to).

Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191118155134.30468-3-hdegoede@redhat.com

drm/modes: parse_cmdline: Make various char pointers const

We are not supposed to modify the passed in string, make char pointers
used in drm_mode_parse_cmdline_options() const char * where possible.

Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191118155134.30468-2-hdegoede@redhat.com

drm/modes: parse_cmdline: Fix possible reference past end of string

Before this commit, if the last option of a video=... option is for
example "rotate" without a "=<value>" after it then delim will point to
the terminating 0 of the string, and value which is sets to <delim + 1>
will point one position past the end of the string.

This commit fixes this by enforcing that the contents of delim equals '='
as it should be for options which take a value, this check is done in a
new drm_mode_parse_cmdline_int helper function which factors out the
common integer parsing code for all the options which take an int.

Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191118155134.30468-1-hdegoede@redhat.com

drm/rockchip: dsi: add px30 support

Add the compatible and GRF definitions for the PX30 soc.

changes in v5:
- rebased on top of 5.5-rc1
- merged with dsi timing change to prevent ordering conflicts

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191209143130.4553-7-heiko@sntech.de

dt-bindings: display: rockchip-dsi: add px30 compatible

The px30 SoC also uses a dw-mipi-dsi controller, so add the
compatible value for it.

changes in v5:
- rebased on top of 5.5-rc1
- merged with dsi timing change to prevent ordering conflicts

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191209143130.4553-6-heiko@sntech.de

drm/rockchip: add ability to handle external dphys in mipi-dsi

While the common case is that the dsi controller uses an internal dphy,
accessed through the phy registers inside the dsi controller, there is
also the possibility to use a separate dphy from a different vendor.

One such case is the Rockchip px30 that uses a Innosilicon Mipi dphy,
so add the support for handling such a constellation, including the pll
also getting generated inside that external phy.

changes in v5:
- rebased on top of 5.5-rc1
- merged with dsi timing change to prevent ordering conflicts

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191209143130.4553-5-heiko@sntech.de

dt-bindings: display: rockchip-dsi: document external phys

Some dw-mipi-dsi instances in Rockchip SoCs use external dphys.
In these cases the needs clock will also be generated externally
so these don't need the ref-clock as well.

changes in v5:
- rebased on top of 5.5-rc1
- merged with dsi timing change to prevent ordering conflicts

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191209143130.4553-4-heiko@sntech.de

drm/bridge/synopsys: dsi: move phy_ops callbacks around panel enablement

If implementation-specific phy_ops need to be defined they probably
should be enabled before trying to talk to the panel and disabled only
after the panel was disabled.

Right now they are enabled last and disabled first, so might make it
impossible to talk to some panels - example for this being the px30
with an external Innosilicon dphy that needs the phy to be enabled
to transfer commands to the panel.

So move the calls appropriately.

changed in v5:
- rebased on top of 5.5-rc1
- merged with dsi timing change to prevent ordering conflicts

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Yannick Fertre <yannick.fertre@st.com>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191209143130.4553-3-heiko@sntech.de

drm/bridge/synopsys: dsi: driver-specific configuration of phy timings

The timing values for dw-dsi are often dependent on the used display and
according to Philippe Cornu will most likely also depend on the used phy
technology in the soc-specific implementation.

To solve this and allow specific implementations to define them as needed
add a new get_timing callback to phy_ops and call this from the dphy_timing
function to retrieve the necessary values for the specific mode.

Right now this handles the hs2lp + lp2hs where Rockchip SoCs need handling
according to the phy speed, while STM seems to be ok with static values.

changes in v5:
- rebase on 5.5-rc1
- merge into px30 dsi series to prevent ordering conflicts

changes in v4:
- rebase to make it directly fit on top of drm-misc-next after all

changes in v3:
- check existence of phy_ops->get_timing in __dw_mipi_dsi_probe()
- emit actual error when get_timing() call fails
- add tags from Philippe and Yannick

changes in v2:
- add driver-specific handling, don't force all bridge users to use
  the same timings, as suggested by Philippe

Suggested-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Tested-by: Yannick Fertre <yannick.fertre@st.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191209143130.4553-2-heiko@sntech.de

drm/tilcdc: Remove obsolete bundled tilcdc tfp410 driver

Remove obsolete bundled tfp410 driver with its "ti,tilcdc,tfp410"
devicetree binding. No platform has ever used this driver in the
mainline kernel and if anybody connects tfp410 to tilcdc he or she
should use the generic drm tfp410 bridge driver.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6e2db6c328467cc51e8d633ecb0ffa7c5736f2e8.1575901747.git.jsarha@ti.com

gpu/drm: ingenic: Add support for the JZ4770

The LCD controller in the JZ4770 supports up to 720p. While there has
been many new features added since the old JZ4740, which are not yet
handled here, this driver still works fine.

v2: No change

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210144142.33143-6-paul@crapouillou.net
# *** extracted tags ***
Acked-by: Sam Ravnborg <sam@ravnborg.org>

gpu/drm: ingenic: Check for display size in CRTC atomic check

Check that the requested display size isn't above the limits supported
by the CRTC.

- JZ4750 and older support up to 800x600;
- JZ4755 supports up to 1024x576;
- JZ4760 and JZ4770 support up to 720p;
- JZ4780 supports up to 2k.

v2: No change

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210144142.33143-5-paul@crapouillou.net
# *** extracted tags ***
Acked-by: Sam Ravnborg <sam@ravnborg.org>

gpu/drm: ingenic: Set max FB height to 4095

While the LCD controller can effectively only support a maximum
resolution of 800x600, the framebuffer's height can be much higher,
since we can change the Y start offset.

v2: No change

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210144142.33143-4-paul@crapouillou.net
# *** extracted tags ***
Acked-by: Sam Ravnborg <sam@ravnborg.org>

gpu/drm: ingenic: Use the plane's src_[x,y] to configure DMA length

Instead of obtaining the width/height of the framebuffer from the CRTC
state, obtain it from the current plane state.

v2: No change

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210144142.33143-3-paul@crapouillou.net
# *** extracted tags ***
Acked-by: Sam Ravnborg <sam@ravnborg.org>

gpu/drm: ingenic: Avoid null pointer deference in plane atomic update

It is possible that there is no drm_framebuffer associated with a given
plane state.

v2: Handle drm_plane->state which can be NULL too

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210144142.33143-2-paul@crapouillou.net
# *** extracted tags ***
Acked-by: Sam Ravnborg <sam@ravnborg.org>

dt-bindings: display/ingenic: Add compatible string for JZ4770

Add a compatible string for the LCD controller found in the JZ4770 SoC.

v2: No change

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210144142.33143-1-paul@crapouillou.net
# *** extracted tags ***
Acked-by: Sam Ravnborg <sam@ravnborg.org>

drm/sun4i: Remove unneeded semicolon in sun4i_layer.c

Fixes coccicheck warning:

drivers/gpu/drm/sun4i/sun4i_layer.c:253:3-4: Unneeded semicolon
drivers/gpu/drm/sun4i/sun4i_layer.c:257:2-3: Unneeded semicolon

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/1576317091-24968-3-git-send-email-zhengbin13@huawei.com

drm/sun4i: Remove unneeded semicolon in sun8i_mixer.c

Fixes coccicheck warning:

drivers/gpu/drm/sun4i/sun8i_mixer.c:289:3-4: Unneeded semicolon
drivers/gpu/drm/sun4i/sun8i_mixer.c:292:2-3: Unneeded semicolon
drivers/gpu/drm/sun4i/sun8i_mixer.c:302:3-4: Unneeded semicolon
drivers/gpu/drm/sun4i/sun8i_mixer.c:305:2-3: Unneeded semicolon

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/1576317091-24968-2-git-send-email-zhengbin13@huawei.com

drm/gma500: Pass GPIO for Intel MID using descriptors

The GMA500 driver is using the legacy GPIO API to fetch
three optional display control GPIO lines from the SFI
description used by the Medfield platform.

Switch this over to use GPIO descriptors and delete the
custom platform data.

We create three new static locals in the tc35876x bridge
code but it is hardly any worse than the I2C client static
local already there: I tried first to move it to the DRM
driver state container but there are workarounds for
probe order in the code so I just stayed off it, as the
result is unpredictable.

People wanting to do a more throrugh and proper cleanup
of the GMA500 driver can work on top of this, I can't
solve much more since I don't have access to the hardware,
I can only attempt to tidy up my GPIO corner.

Cc: Daniel Stone <daniels@collabora.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191206094301.76368-1-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

drm/atmel: plane_state->fb iff plane_state->crtc

Checking both is one too much, so wrap a WARN_ON around it to stope
the copypasta.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Boris Brezillon <bbrezillon@kernel.org>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191213172612.1514842-3-daniel.vetter@ffwll.ch

drm/panel: Add Boe Himax8279d MIPI-DSI LCD panel

Support Boe Himax8279d 8.0" 1200x1920 TFT LCD panel, it is a MIPI DSI
panel.

V11:
- Use the backlight support in drm_panel to simplify the driver (Sam)

V10:
- Adjust init code, make the format more concise (Emil)

V9:
- kill off default_off_cmds (Emil)
- use mipi_dsi_dcs_set_display_{on,off} in their enable/disable
    callbacks. (Emil)
- Adjusting the delay function (Emil)

V8:
- modify PARENTHESIS_ALIGNMENT format (Sam)
- use gpios are required API replace optional gpio API (Emil)

V7:
- Modify communication address

V6:
- Add the information of the reviewer
- Remove unnecessary delays, The udelay_range code gracefully returns
    without hitting the scheduler on a delay of 0. (Derek)
- Merge the same data structures, like display_mode and off_cmds (Derek)
- Optimize the processing of results returned by
    devm_gpiod_get_optional (Derek)

V5:
- Add the information of the reviewer (Sam)
- Delete unnecessary header files #include <linux/fb.h> (Sam)
- The config DRM_PANEL_BOE_HIMAX8279D appears twice. Drop one of them (Sam)
- ADD static, set_gpios function is not used outside this module (Sam)

V4:
- Frefix all function maes with boe_ (Sam)
- Fsed "enable_gpio" replace "reset_gpio", Make it look clearer (Sam)
- Sort include lines alphabetically (Sam)
- Fixed entries in the makefile must be sorted alphabetically (Sam)
- Add send_mipi_cmds function to avoid duplicating the code (Sam)
- Add the necessary delay(reset_delay_t5) between reset and sending
    the initialization command (Rock wang)

V3:
- Remove unnecessary delays in sending initialization commands (Jitao Shi)

V2:
- Use SPDX identifier (Sam)
- Use necessary header files replace drmP.h (Sam)
- Delete unnecessary header files #include <linux/err.h> (Sam)
- Specifies a GPIOs array to control the reset timing,
    instead of reading "dsi-reset-sequence" data from DTS (Sam)
- Delete backlight_disable() function when already disabled (Sam)
- Use devm_of_find_backlight() replace of_find_backlight_by_node() (Sam)
- Move the necessary data in the DTS to the current file,
    like porch, display_mode and Init code etc. (Sam)
- Add compatible device "boe,himax8279d10p" (Sam)

V1:
- Support Boe Himax8279d 8.0" 1200x1920 TFT LCD panel, it is a MIPI DSI
    panel.

Signed-off-by: Jerry Han <jerry.han.hq@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Derek Basehore <dbasehore@chromium.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reported-by: kbuild test robot <lkp@intel.com>
Cc: Jitao Shi <jitao.shi@mediatek.com>
Cc: Rock wang <rock_wang@himax.com.cn>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> [fixed boe_panel_get_modes + backlight]
Link: https://patchwork.freedesktop.org/patch/msgid/20191212115208.3878-1-jerry.han.hq@gmail.com

drm/gma500: globle no more!

globle, goblin, moblin?

It's dead code, we lucked out.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191211120001.1167980-1-daniel.vetter@ffwll.ch

media: constify fb ops across all drivers

Now that the fbops member of struct fb_info is const, we can start
making the ops const as well.

Remove the redundant fbops assignments while at it.

v2:
- actually add const in vivid
- fix typo (Christophe de Dinechin)

Cc: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Andy Walls <awalls@md.metrocast.net>
Cc: linux-media@vger.kernel.org
Cc: ivtv-devel@ivtvdriver.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/71794337f8611271f2c1fdb3882119a58e743a87.1575390741.git.jani.nikula@intel.com

drm/komeda: Enable new product D32 support

D32 is simple version of D71, the difference is:
- Only has one pipeline
- Drop the periph block and merge it to GCU

v2: Rebase.
v3: Isolate the block counting fix to a new patch

Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Reviewed-by: Mihail Atanassov <mihail.atanassov@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210084828.19664-3-james.qian.wang@arm.com

drm/komeda: Update the chip identify

1. Drop komeda-CORE product id comparison and put it into the d71_identify
2. Update pipeline node DT-binding:
   (a). Skip the needless pipeline DT node.
   (b). Return fail if the essential pipeline DT node is missing.

With these changes, for chips in same family no need to change the DT.

v2: Rebase
v3: Address Mihail's comments.

Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com>
Reviewed-by: Mihail Atanassov <mihail.atanassov@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210084828.19664-2-james.qian.wang@arm.com

drm/komeda: Correct d71 register block counting

Per HW, d71->num_blocks includes reserved blocks but no PERIPH block,
correct the block counting accordingly.
D71 happens to only have one reserved block and periph block, which
hides this counting error.

Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com>
Reviewed-by: Mihail Atanassov <mihail.atanassov@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210061015.25905-1-james.qian.wang@arm.com

drm/udl: Remove udl_fb.c

The remaining code in udl_fb.c is unused. Remove the file entirely.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210084905.5570-10-tzimmermann@suse.de

drm/udl: Move udl_handle_damage() into udl_modeset.c

The only caller of udl_handle_damage() in the plane-update function
in udl_modeset.c. Move udl_handle_damage() there.

v2:
* remove udl_fb.c in a separate patch

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210084905.5570-9-tzimmermann@suse.de

drm/udl: Remove struct udl_device.active_fb_16

The udl driver stores the currently active framebuffer to know from
where to accept damage updates.

With the conversion to plane-state damage handling, this is not necessary
any longer. The currently active framebuffer and damaged area are always
stored in the plane state.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210084905.5570-8-tzimmermann@suse.de

drm/udl: Convert to drm_atomic_helper_dirtyfb()

The infrastruture for atomic modesetting allows us to use the generic
code for dirty-FB and damage handling. Switch over udl and remove the
driver's implementation. The simple-pipe's update function now picks up
the primary plane's damage and updates a minimal region of the screen.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210084905.5570-7-tzimmermann@suse.de

drm/udl: Set preferred color depth to 16 bpp

The current default color depth of 24 bpp is not even supported by
the driver. Being the native format for communicating with the adapter,
16 bpp is the correct choice.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210084905.5570-6-tzimmermann@suse.de

drm/udl: Inline DPMS code into CRTC enable and disable functions

DPMS functionality is only used by the CRTC's enable and disable
functions. Inline the code. The patch also adds symbolic constants
for the blank register and constants; according to udlfb, which is
a bit more detailed than DRM's udl.

v3:
* use symbolic constants for blank, according to udlfb driver

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210084905.5570-5-tzimmermann@suse.de

drm/udl: Switch to atomic suspend/resume helpers

We can use the generic suspend/resume helpers for atomic modesetting.
Switch udl over.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210084905.5570-4-tzimmermann@suse.de

drm/udl: Convert to struct drm_simple_display_pipe

Udl has a single display pipeline with a primary plane; perfect for
simple-pipe helpers. Convert it over. The old encoder and CRTC code
becomes unused and obsolete.

Exported formats for the primary plane are RGB565 and XRGB8888, with
the latter being emulated. The 16-bit format is the default and what
is used when communicating with the device.

This patch enables atomic modesetting for udl devices.

v3:
* remove unused field crtc from struct udl_device
* set crtc_state->no_vblank at beginning of enable()
v2:
* move suspend/resume changes into separate patch
* remove non-atomic code

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210084905.5570-3-tzimmermann@suse.de

drm/udl: Init connector before encoder and CRTC

To mimic simple-pipe, we initialize the connector before the rest of
the display pipeline.

v2:
* remove unnecessary calls to drm_connector_{register,unregister}()

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210084905.5570-2-tzimmermann@suse.de

drm/edid: Increase size of VDB and CMDB bitmaps to 256 bits

CEA-861-G adds modes up to 219, so increase the size of the
maps in preparation for adding the new modes to drm_edid.c.

Signed-off-by: Thomas Anderson <thomasanderson@google.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210221048.83628-1-thomasanderson@google.com

auxdisplay: constify fb ops

Now that the fbops member of struct fb_info is const, we can start
making the ops const as well.

Cc: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com>
Cc: Robin van der Gracht <robin@protonic.nl>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Acked-by: Robin van der Gracht <robin@protonic.nl>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/31c18e3ce9d6962aabda4799b3051039ff591c92.1575390741.git.jani.nikula@intel.com

kselftests: Add dma-heap test

Add very trivial allocation and import test for dma-heaps,
utilizing the vgem driver as a test importer.

A good chunk of this code taken from:
  tools/testing/selftests/android/ion/ionmap_test.c
  Originally by Laura Abbott <labbott@redhat.com>

Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Liam Mark <lmark@codeaurora.org>
Cc: Pratik Patel <pratikp@codeaurora.org>
Cc: Brian Starkey <Brian.Starkey@arm.com>
Cc: Vincent Donnefort <Vincent.Donnefort@arm.com>
Cc: Sudipto Paul <Sudipto.Paul@arm.com>
Cc: Andrew F. Davis <afd@ti.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Chenbo Feng <fengc@google.com>
Cc: Alistair Strachan <astrachan@google.com>
Cc: Hridya Valsaraju <hridya@google.com>
Cc: Sandeep Patil <sspatil@google.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Dave Airlie <airlied@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Acked-by: Sandeep Patil <sspatil@android.com>
Acked-by: Laura Abbott <labbott@redhat.com>
Tested-by: Ayan Kumar Halder <ayan.halder@arm.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191203172641.66642-6-john.stultz@linaro.org

dma-buf: heaps: Add CMA heap to dmabuf heaps

This adds a CMA heap, which allows userspace to allocate
a dma-buf of contiguous memory out of a CMA region.

This code is an evolution of the Android ION implementation, so
thanks to its original author and maintainters:
  Benjamin Gaignard, Laura Abbott, and others!

NOTE: This patch only adds the default CMA heap. We will enable
selectively adding other CMA memory regions to the dmabuf heaps
interface with a later patch (which requires a dt binding)

Cc: Laura Abbott <labbott@redhat.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Liam Mark <lmark@codeaurora.org>
Cc: Pratik Patel <pratikp@codeaurora.org>
Cc: Brian Starkey <Brian.Starkey@arm.com>
Cc: Vincent Donnefort <Vincent.Donnefort@arm.com>
Cc: Sudipto Paul <Sudipto.Paul@arm.com>
Cc: Andrew F. Davis <afd@ti.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Chenbo Feng <fengc@google.com>
Cc: Alistair Strachan <astrachan@google.com>
Cc: Hridya Valsaraju <hridya@google.com>
Cc: Sandeep Patil <sspatil@google.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Dave Airlie <airlied@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Acked-by: Sandeep Patil <sspatil@android.com>
Acked-by: Laura Abbott <labbott@redhat.com>
Tested-by: Ayan Kumar Halder <ayan.halder@arm.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191203172641.66642-5-john.stultz@linaro.org

dma-buf: heaps: Add system heap to dmabuf heaps

This patch adds system heap to the dma-buf heaps framework.

This allows applications to get a page-allocator backed dma-buf
for non-contiguous memory.

This code is an evolution of the Android ION implementation, so
thanks to its original authors and maintainters:
  Rebecca Schultz Zavin, Colin Cross, Laura Abbott, and others!

Cc: Laura Abbott <labbott@redhat.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Liam Mark <lmark@codeaurora.org>
Cc: Pratik Patel <pratikp@codeaurora.org>
Cc: Brian Starkey <Brian.Starkey@arm.com>
Cc: Vincent Donnefort <Vincent.Donnefort@arm.com>
Cc: Sudipto Paul <Sudipto.Paul@arm.com>
Cc: Andrew F. Davis <afd@ti.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Chenbo Feng <fengc@google.com>
Cc: Alistair Strachan <astrachan@google.com>
Cc: Hridya Valsaraju <hridya@google.com>
Cc: Sandeep Patil <sspatil@google.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Dave Airlie <airlied@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Acked-by: Sandeep Patil <sspatil@android.com>
Acked-by: Laura Abbott <labbott@redhat.com>
Tested-by: Ayan Kumar Halder <ayan.halder@arm.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191203172641.66642-4-john.stultz@linaro.org