drm/i915/mtl: C20 state verification

Add state verification for C20 as we have one
for C10.

V2: Use abstractation of HW readout (Gustavo)
    Drop MPLLA/B from message for TX and CMN
    parameters (Gustavo)

Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> (v1,v2)
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231109112148.309669-1-mika.kahola@intel.com

drm/i915: update in-source bug filing URLs

The bug filing documentation has been moved from the gitlab wiki to
gitlab pages at https://drm.pages.freedesktop.org/intel-docs/.

Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231110114807.3455739-2-jani.nikula@intel.com

MAINTAINERS: update drm/i915 W: and B: entries

The 01.org page has ceased to exist, and the relevant documentation is
now hosted at https://drm.pages.freedesktop.org/intel-docs/

Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231110114807.3455739-1-jani.nikula@intel.com

drm/i915: remove excess functions from plane protection check

Reduce the function calls by reusing ->decrypt.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231109160722.3372379-2-jani.nikula@intel.com

drm/i915: abstract plane protection check

Centralize the conditions in a function.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231109160722.3372379-1-jani.nikula@intel.com

drm/i915/panelreplay: enable/disable panel replay

TRANS_DP2_CTL register is programmed to enable panel replay from source
and sink is enabled through panel replay dpcd configuration address.

Bspec: 1407940617

v1: Initial version.
v2:
- Use pr_* flags instead psr_* flags. [Jouni]
- Remove intel_dp_is_edp check as edp1.5 also has panel replay. [Jouni]

v3: Cover letter updated and selective fetch condition check is added
before updating its bit in PSR2_MAN_TRK_CTL register. [Jouni]

v4: Selective fetch related PSR2_MAN_TRK_CTL programmming dropped. [Jouni]

v5: Added PSR2_MAN_TRK_CTL programming as needed for Continuous Full
Frame (CFF) update.

v6: Rebased on latest.

Note: Initial plan is to enable panel replay in  full-screen live active
frame update mode. In a incremental approach panel replay will be enabled
in selctive update mode if there is any gap in curent implementation.

Cc: Jouni Högander <jouni.hogander@intel.com>
Cc: Arun R Murthy <arun.r.murthy@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231108072303.3414118-6-animesh.manna@intel.com

drm/i915/panelreplay: Enable panel replay dpcd initialization for DP

Due to similarity panel replay dpcd initialization got added in psr
function which is specific for edp panel. This patch enables panel
replay initialization for dp connector.

Cc: Jouni Högander <jouni.hogander@intel.com>
Cc: Arun R Murthy <arun.r.murthy@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231108072303.3414118-5-animesh.manna@intel.com

drm/i915/panelreplay: Initializaton and compute config for panel replay

Modify existing PSR implementation to enable panel replay feature of DP 2.0
which is similar to PSR feature of EDP panel. There is different DPCD
address to check panel capability compare to PSR and vsc sdp header
is different.

v1: Initial version.
v2:
- Set source_panel_replay_support flag under HAS_PANEL_REPLAY()
condition check. [Jouni]
- Code restructured around intel_panel_replay_init
and renamed to intel_panel_replay_init_dpcd. [Jouni]
- Remove the initial code modification around has_psr2 flag. [Jouni]
- Add CAN_PANEL_REPLAY() in intel_encoder_can_psr which is used to
enable in intel_psr_post_plane_update. [Jouni]
v3:
- Initialize both psr and panel-replay. [Jouni]
- Initialize both panel replay and psr if detected. [Jouni]
- Refactoring psr function by introducing _psr_compute_config(). [Jouni]
- Add check for !is_edp while deriving source_panel_replay_support. [Jouni]
- Enable panel replay dpcd initialization in a separate patch. [Jouni]

v4:
- HAS_PANEL_REPLAY() check not needed during sink capability check. [Jouni]
- Set either panel replay source support or psr. [Jouni]

v5:
- HAS_PANEL_REPLAY() removed and use HAS_DP20() instead. [Jouni]
- Move psr related code to intel_psr.c. [Jani]
- Reset sink_panel_replay_support flag during disconnection. [Jani]

v6: return statement restored which is removed by misatke. [Jouni]
v7: cosmetic changes. [Arun]

Cc: Jouni Högander <jouni.hogander@intel.com>
Cc: Arun R Murthy <arun.r.murthy@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231108072303.3414118-4-animesh.manna@intel.com

drm/i915/psr: Move psr specific dpcd init into own function

This patch is preparing adding panel replay specific dpcd init.

Cc: Arun R Murthy <arun.r.murthy@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231108072303.3414118-3-animesh.manna@intel.com

drm/panelreplay: dpcd register definition for panelreplay

Add DPCD register definition for discovering, enabling and
checking status of panel replay of the sink.

Cc: Jouni Högander <jouni.hogander@intel.com>
Cc: Arun R Murthy <arun.r.murthy@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231108072303.3414118-2-animesh.manna@intel.com

drm/i915/gvt: Clean up zero initializers

Just use a simple {} to zero initialize arrays/structs instead
of the hodgepodge of stuff we are using currently.

Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231012122442.15718-7-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Do plane/etc. updates more atomically across pipes

Perform all the intel_pre_update_crtc() stuff for all pipes first,
and only then do the intel_update_crtc() vblank evasion stuff for
every pipe back to back. This should make it more likely that
the plane updates from multiple pipes happen on the same frame
(assuming the pipes are running in sync, eg. due to bigjoiner
or port sync).

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230907122541.32261-4-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>

drm/i915: Split intel_update_crtc() into two parts

Split intel_update_crtc() into two parts such that the first
part performs all the non-vblank evasion preparatory stuff,
and the second part just does the vblank evasion stuff.

For now we just call these back to back so that there is
no funcitonal change.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230907122541.32261-3-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>

drm/i915: Drop redundant !modeset check

Since commit 7de5b6b54630 ("drm/i915: Don't flag both full
modeset and fastset at the same time")
intel_crtc_needs_fastset() and intel_crtc_needs_modeset() have
been mutually exclusive. Drop the redundant check.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230907122541.32261-2-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>

drm/i915: Query compressed bpp properly using correct DPCD and DP Spec info

Currently we seem to be using wrong DPCD register for reading
compressed bpps, reading min/max input bpc instead of compressed bpp.
Fix that, so that we now apply min/max compressed bpp limitations we
get from DP Spec Table 2-157 DP v2.0 and/or correspondent DPCD
register DP_DSC_MAX_BITS_PER_PIXEL_LOW/HIGH.

This might also allow us to get rid of an ugly compressed bpp
recalculation, which we had to add to make some MST hubs usable.

v2: - Fix operator precedence
v3: - Added debug info about compressed bpps
v4: - Don't try to intersect Sink input bpp and compressed bpps.
v5: - Decrease step while looking for suitable compressed bpp to
      accommodate.
v6: - Use helper for getting min and max compressed_bpp (Ankit)
v7: - Fix checkpatch warning (Ankit)

Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231030155843.2251023-31-imre.deak@intel.com

drm/i915/dp_mst: Check BW limitations only after all streams are computed

After the previous patch the BW limits on the whole MST topology will be
checked after computing the state for all the streams in the topology.
Accordingly remove the check during the stream's encoder compute config
step, to prevent failing an atomic commit due to a BW limit, if this can
be resolved only by reducing the BW of other streams on the same MST
link.

Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231030155843.2251023-30-imre.deak@intel.com

drm/i915/dp_mst: Improve BW sharing between MST streams

At the moment modesetting a stream CRTC will fail if the stream's BW
along with the current BW of all the other streams on the same MST link
is above the total BW of the MST link. Make the BW sharing more dynamic
by trying to reduce the link bpp of one or more streams on the MST link
in this case.

When selecting a stream to reduce the BW for, take into account which
link segment in the MST topology ran out of BW and which streams go
through this link segment. For instance with A,B,C streams in the same
MST topology A and B may share the BW of a link segment downstream of a
branch device, stream C not downstream of the branch device, hence not
affecting this BW. If this link segment's BW runs out one or both of
stream A/B's BW will be reduced until their total BW is within limits.

While reducing the link bpp for a given stream DSC may need to be
enabled for it, which requires FEC on the whole MST link. Check for this
condition and recompute the state for all streams taking the FEC
overhead into account (on 8b/10b links).

v2:
- Rebase on s/min_bpp_pipes/min_bpp_reached_pipes/ change.

Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231030155843.2251023-29-imre.deak@intel.com

drm/i915/dp_mst: Force modeset CRTC if DSC toggling requires it

Enabling / disabling DSC decompression in the branch device downstream
of the source may reset the whole branch device. To avoid this while the
streams are still active, force a modeset on all CRTC/ports connected to
this branch device.

v2:
- Check the CRTC state for each connector in the topology, instead of
  the CRTC being checked for a modeset requirement. (Ville)
- Add DocBook for the new function.
v3:
- Rebased on a change not to use
  intel_modeset_pipes_in_mask_early().

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> (v1)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231107001505.3370108-8-imre.deak@intel.com

drm/i915: Factor out function to clear pipe update flags

Factor out a helper to clear the pipe update flags, used by a follow-up
patch to modeset an MST topology.

v2:
- Move the intel_crtc_needs_modeset() check to the callers. (Ville)
v3 (Ville):
- Rename clear_pipe_update_flags_on_modeset_crtc() to
  intel_crtc_flag_modeset().
- Also set crtc_state->uapi.mode_changed in the function.
- Leave out the unrelated change to use
  intel_modeset_pipes_in_mask_early().

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> (v1)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231107001505.3370108-7-imre.deak@intel.com

drm/i915/dp_mst: Enable MST DSC decompression for all streams

Enable DSC decompression for all streams. In particular atm if a sink is
connected to a last branch device that is downstream of the first branch
device connected to the source, decompression is not enabled for it.
Similarly it's not enabled if the sink supports this with the last
branch device passing through the compressed stream to it.

Enable DSC in the above cases as well. Since last branch devices may
handle the decompression for multiple ports, toggling DSC needs to be
refcounted, add this using the DSC AUX device as a reference.

v2:
- Fix refcounting, setting/clearing
  connector->dp.dsc_decompression_enabled always as needed. (Stan)
- Make the refcounting more uniform for the SST vs. MST case.
- Add state checks for connector->dp.dsc_decompression_enabled and
  connector crtc.
- Sanitize connector DSC decompression state during HW setup.
- s/use_count/ref_count/
v3:
- Remove stale TODO: comment to set the actual decompression_aux.

Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231107001505.3370108-6-imre.deak@intel.com

drm/i915/dp_mst: Enable DSC passthrough

Enable passing through DSC streams to the sink in last branch devices.

v2:
- Fix the DPCD register address while setting/clearing the passthrough
  flag.

Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231030155843.2251023-25-imre.deak@intel.com

drm/i915/dp: Enable DSC via the connector decompression AUX

Enable DSC using the DSC AUX device stored for this purpose in the
connector. For clarity add separate functions to enable/disable the
decompression, since these sequences will diverge more in follow-up
patches that also enable/disable DSC passthrough and on MST do the
actual enabling/disabling only for the first/last user of the given
AUX device. As a preparation for the latter refcounting change, also
pass the atomic state to the functions.

While at it set/clear only the DP_DECOMPRESSION_EN flag in the
DP_DSC_ENABLE DPCD register, preserving the reserved register bits.

Besides preserving the reserved register bits, the behavior stays as
before, as DSC is still only enabled for the first MST stream (which a
follow-up patch changes, enabling it for all streams).

v2:
- Add a helper function setting/clearing the decompression flag,
  preserving the reserved register bits.
v3:
- Add separate functions to enable/disable decompression and pass the
  atomic state to these.
- Add DocBook for both functions.

Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> (v2)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231030155843.2251023-24-imre.deak@intel.com

drm/i915/dp_mst: Enable decompression in the sink from the MST encoder hooks

Enable/disable the DSC decompression in the sink/branch from the MST
encoder hooks. This prepares for an upcoming patch toggling DSC for each
stream as needed, but for now keeps the current behavior, as DSC is only
enabled for the first MST stream.

v2:
- Rebased on latest drm-tip.

Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231107001505.3370108-5-imre.deak@intel.com

drm/i915/dp_mst: Handle the Synaptics HBlank expansion quirk

The Synaptics MST hubs expose some sink EDID modes with a reduced HBLANK
period, presumedly to save BW, which the hub expands before forwarding
the stream to the sink. In particular a 4k mode with a standard CVT
HBLANK period is exposed with either a CVT reduced blank RBv1,v2 (80,
160 pixel) or a non-CVT 56 pixel HBLANK period. The DP standard
describes the above HBLANK expansion functionality, but it requires
enabling this explicitly, whereas these hubs apply the expansion
transparently.

In some TBT docks with such a Synaptics hub (DELL WD22TB4) the above modes
will work okay until DSC decompression is enabled in the hub for the given
sink, but after this the same mode will not work reliably in decompressed
mode. In another TBT dock (Thinkpad 40B0) the above modes will not work
in uncompressed/18bpp mode (regardless of whether DSC decompression was
enabled before or not).

As a workaround force enable DSC for such modes.  Apply the WA when the
HBLANK period is 300ns or below, matching the above tested modes with a
533.25MHz dotclock and maximum 160 HBLANK pixels.

OTOH DSC for these modes will only work above a certain compressed bpp
threshold which depends on the link rate, so apply this limit as well
in the workaround.

On platforms, pipe/port configurations where DSC is not supported, for
instance on ICL where DSC/MST is still work-in-progress, limit the
minimum link bpp to 24.

Apply the workaround only for Synaptics hubs which support the HBLANK
expansion.

v2:
- Apply the WA whenever the HBLANK period is 300ns or below.
v3:
- Clarify in the commit log the failure modes of the different docks.
- Handle platforms/pipe/port configurations without DSC support.

Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> (v1)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231107001505.3370108-4-imre.deak@intel.com

drm/i915/dp: Disable FEC ready flag in the sink

Disable the FEC ready flag in the sink during a disabling modeset.

Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231030155843.2251023-21-imre.deak@intel.com

drm/i915/dp: Wait for FEC detected status in the sink

As required by the DP standard wait for the sink to detect the FEC
decode enabling symbol sent by the source.

There is a difference between SST and MST when the source enables
the FEC encoding: on SST this happens only after enabling the
transcoder, whereas on MST it happens already after enabling the
transcoder function (before enabling the transcoder). Wait for the
detected status at the earliest spot accordingly.

v2:
- Wait for the FEC detected status on SST after the transcoder is
  enabled.

Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231030155843.2251023-20-imre.deak@intel.com

drm/i915/dp: Rename intel_ddi_disable_fec_state() to intel_ddi_disable_fec()

Rename intel_ddi_disable_fec_state() to intel_ddi_disable_fec(), for
symmetry with intel_ddi_enable_fec().

Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231030155843.2251023-19-imre.deak@intel.com

drm/i915/dp_mst: Add missing DSC compression disabling

Add the missing DSC compression disabling step for MST streams,
similarly to how this is done for SST outputs.

Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231030155843.2251023-18-imre.deak@intel.com

drm/i915/dp: Make sure the DSC PPS SDP is disabled whenever DSC is disabled

Atm the DSC PPS SDP will stay enabled after enabling and disabling DSC.
This leaves an output blank after switching off DSC on it. Make sure the
SDP is disabled for an uncompressed output.

v2:
- Disable the SDP already during output disabling. (Ville)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231030155843.2251023-17-imre.deak@intel.com

drm/i915/dp_mst: Program the DSC PPS SDP for each stream

Atm the DSC PPS SDP is programmed only if the first stream is compressed
and then it's programmed only for the first stream. This left all other
compressed streams blank. Program the SDP for all streams.

v2:
- Rebase on upstream include "intel_vdsc.h" change.

Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231107001505.3370108-3-imre.deak@intel.com

drm/i915/dp_mst: Add atomic state for all streams on pre-tgl platforms

If an MST stream is modeset, its state must be checked along all the
other streams on the same MST link, for instance to resolve a BW
overallocation of a non-sink MST port or to make sure that the FEC is
enabled/disabled the same way for all these streams.

To prepare for that this patch adds all the stream CRTCs to the atomic
state and marks them for modeset similarly to tgl+ platforms. (If the
state computation doesn't change the state the CRTC is switched back to
fastset mode.)

So far on tgl+ this was required because all streams in the topology
shared the master transcoder. For older platforms this didn't apply but
adding all the state is required now on all platforms based on the
above.

v2:
- Add code and commit log comment clarifying the requirements on old/new
  platforms. (Stan)
- Rename the function based on the new semantic. (Ville)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231030155843.2251023-15-imre.deak@intel.com

drm/i915/dp_mst: Account for FEC and DSC overhead during BW allocation

Atm, the BW allocated for an MST stream doesn't take into account the
DSC control symbol (EOC) and data alignment overhead on the local (first
downstream) MST link (reflected by the data M/N/TU values) and - besides
the above overheads - the FEC symbol overhead on 8b/10b remote
(after a downstream branch device) MST links.

In addition the FEC overhead used on the local link is a fixed amount,
which only applies to certain modes, but not enough for all modes; add a
code comment clarifying this.

Fix the above by calculating the data M/N values with the total BW
overhead (not including the SSC overhead, since this isn't enabled by
the source device) and using this the PBN and TU values for the local
link and PBN for remote links (including SSC, since this is mandatory
for links after downstream branch devices).

For now keep the current fixed FEC overhead as a minimum, since this is
what bspec requires for audio functionality.

Calculate the effective link BW in a clearer way, applying the channel
coding efficiency based on the coding type. The calculation was correct
for 8b/10b, but not for 128b/132b links; this patch leaves the behavior
for this unchanged, leaving the fix for a follow-up.

v2:
- Fix TU size programmed to the HW, making it match the payload size
  programmed to the payload table.
v3:
- Add code comment about the connection between the payload's size in
  the payload table and the corresponding PBN value. (Ville)
- Add WARN_ON(remote_m_n.tu < dp_m_n.tu). (Ville)
- Add code comment about factors not accounted for by the BW
  calculation in intel_dp_mst_mode_valid_ctx() (and compute config).
  (Ville)
- Simplify calculation of PBN to remote_m_n.tu * mst_state->pbn_div.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> (v1)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231107001505.3370108-2-imre.deak@intel.com

drm/i915/dp: Pass actual BW overhead to m_n calculation

A follow-up MST patch will need to specify the total BW allocation
overhead, prepare for that here by passing the amount of overhead
to intel_link_compute_m_n(), keeping the existing behavior.

v2:
- Fix passing the correct crtc_state->fec_enable param in
  intel_dp_mst_compute_link_config() /
  intel_dp_dsc_mst_compute_link_config().

Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> (v1)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231030155843.2251023-13-imre.deak@intel.com

drm/i915/dp: Specify the FEC overhead as an increment vs. a remainder

A follow-up patch will add up all the overheads on a DP link, where it
makes more sense to specify each overhead factor in terms of the added
overhead amount vs. the reciprocal remainder (of usable BW remaining
after deducting the overhead). Prepare for that here, keeping the
existing behavior.

Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231030155843.2251023-12-imre.deak@intel.com

drm/i915/dp_mst: Enable FEC early once it's known DSC is needed

Enable FEC in crtc_state, as soon as it's known it will be needed by
DSC. This fixes the calculation of BW allocation overhead, in case DSC
is enabled by falling back to it during the encoder compute config
phase (vs. enabling FEC due to DSC being enabled on other streams).

v2:
- Enable FEC only in intel_dp_mst_find_vcpi_slots_for_bpp(), since
  only by that will crtc_state->port_clock be set, which in turn is
  needed by intel_dp_is_uhbr().

Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> (v1)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231030155843.2251023-11-imre.deak@intel.com

drm/dp: Add helpers to calculate the link BW overhead

Add helpers drivers can use to calculate the BW allocation overhead -
due to SSC, FEC, DSC and data alignment on symbol cycles - and the
channel coding efficiency - due to the 8b/10b, 128b/132b encoding. On
128b/132b links the FEC overhead is part of the coding efficiency, so
not accounted for in the BW allocation overhead.

The drivers can use these functions to calculate a ratio, controlling
the stream symbol insertion rate of the source device in each SST TU
or MST MTP frame. Drivers can calculate this

m/n = (pixel_data_rate * drm_dp_bw_overhead()) /
      (link_data_rate * drm_dp_bw_channel_coding_efficiency())

ratio for a given link and pixel stream and with that the

slots_per_mtp = CEIL(64 * m / n)

allocated slots per MTP for the stream in a link frame and with
that the

pbn = slots_per_mtp * drm_mst_get_pbn_divider()

allocated PBNs for the stream on the MST link path.

Take drm_dp_bw_overhead() into use in drm_dp_calc_pbn_mode(), for
drivers calculating the PBN value directly.

v2:
- Add dockbook description to drm_dp_bw_channel_coding_efficiency().
  (LKP).
- Clarify the way m/n ratio is calculated in the commit log.
v3:
- Fix compile breakage for !CONFIG_BACKLIGHT_CLASS_DEVICE. (LKP)
- Account for FEC_PM overhead (+ 0.0015625 %), add comment
  with the formula to calculate the total FEC overhead. (Ville)
v4:
- Rename DRM_DP_OVERHEAD_SSC to DRM_DP_OVERHEAD_SSC_REF_CLK. (Ville)
v5:
- Clarify in the commit log what MTP means.
- Simplify the commit log's formula to calculate PBN.

Cc: Lyude Paul <lyude@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: kernel test robot <lkp@intel.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> (v2)
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231107001505.3370108-1-imre.deak@intel.com

drm/dp_mst: Add HBLANK expansion quirk for Synaptics MST hubs

Add a quirk for Synaptics MST hubs, which require a workaround - at leat
on i915 - for some modes, on which the hub applies HBLANK expansion.
These modes will only work by enabling DSC decompression for them, a
follow-up patch will do this in i915.

v2:
- Fix the quirk name in its DocBook description.

Cc: Lyude Paul <lyude@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231030155843.2251023-9-imre.deak@intel.com

drm/dp: Add DP_HBLANK_EXPANSION_CAPABLE and DSC_PASSTHROUGH_EN DPCD flags

Add the DPCD flag to enable DSC passthrough in a last branch device,
used in a follow-up i915 patch.

Also add a flag to detect HBLANK expansion support in a branch device,
used by a workaround in a follow-up i915 patch.

Cc: Lyude Paul <lyude@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231030155843.2251023-8-imre.deak@intel.com

drm/dp_mst: Allow DSC in any Synaptics last branch device

The Synaptics MST branch devices support DSC decompression on all their
output ports, provided that they are last branch devices (with their
output ports connected to the sinks). The Thinkpad 40B0 TBT dock for
instance has two such branch devices, a secondary one connected to one
of the output ports of the primary; hence the decompression needs to be
enabled in both branch devices to enable decompression for all the
sinks.

Based on the above add support for enabling decompression in last
Synaptics branch devices.

Cc: Lyude Paul <lyude@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231030155843.2251023-7-imre.deak@intel.com

drm/dp_mst: Swap the order of checking root vs. non-root port BW limitations

drm_dp_mst_atomic_check_mgr() should check for BW limitation starting
from sink ports continuing towards the root port, so that drivers can
use the @failing_port returned to resolve a BW overallocation in an
ideal way. For instance from streams A,B,C in a topology A,B going
through @failing_port and C not going through it, a BW overallocation of
A,B due to a limit of the port must be resolved first before considering
the limits of other ports closer to the root port. This way can avoid
reducing the BW of stream C unnecessarily due to a BW limit closer to the
root port.

Based on the above swap the order of the BW check for the root port and
the check for all the ports downstream of it (the latter going through
the topology already in the sink->root port direction).

Cc: Lyude Paul <lyude@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231030155843.2251023-6-imre.deak@intel.com

drm/dp_mst: Factor out a helper to check the atomic state of a topology manager

Factor out a helper to check the atomic state for one MST topology
manager, returning the MST port where the BW limit check has failed.
This will be used in a follow-up patch by the i915 driver to improve the
BW sharing between MST streams.

Cc: Lyude Paul <lyude@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231030155843.2251023-5-imre.deak@intel.com

drm/dp_mst: Add helper to determine if an MST port is downstream of another port

Add drm_dp_mst_port_downstream_of_parent() required by the i915
driver in a follow-up patch to resolve a BW overallocation of MST
streams going through a given MST port.

Cc: Lyude Paul <lyude@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231030155843.2251023-4-imre.deak@intel.com

drm/dp_mst: Fix fractional DSC bpp handling

The current code does '(bpp << 4) / 16' in the MST PBN
calculation, but that is just the same as 'bpp' so the
DSC codepath achieves absolutely nothing. Fix it up so that
the fractional part of the bpp value is actually used instead
of truncated away. 64*1006 has enough zero lsbs that we can
just shift that down in the dividend and thus still manage
to stick to a 32bit divisor.

And while touching this, let's just make the whole thing more
straightforward by making the passed in bpp value .4 binary
fixed point always, instead of having to pass in different
things based on whether DSC is enabled or not.

v2:
- Fix DSC kunit test cases.

Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: David Francis <David.Francis@amd.com>
Cc: Mikita Lipski <mikita.lipski@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Fixes: dc48529fb14e ("drm/dp_mst: Add PBN calculation for DSC modes")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[Imre: Fix kunit test cases]
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231030155843.2251023-3-imre.deak@intel.com

drm/i915/dp_mst: Fix race between connector registration and setup

After drm_connector_init() is called the connector is visible to the
rest of the kernel via the drm_mode_config::connector_list. Make
sure that the DSC AUX device and capabilities are setup by that time.

Another race condition is adding the connector to the connector list
before drm_connector_helper_add() sets the connector helper functions.
That's an unrelated issue, for which the fix is for a follow-up. One
solution would be adding the connector to the connector list only
during its registration in drm_connector_register().

Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: 808b43fa7e56 ("drm/i915/dp_mst: Set connector DSC capabilities and decompression AUX")
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231030155843.2251023-2-imre.deak@intel.com

drm/i915: move display spinlock init to display code

The gem code has no business accessing i915->display directly.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231102155223.2298316-2-jani.nikula@intel.com

drm/i915: move display mutex inits to display code

The core code has no business accessing i915->display directly. These
could be further spread to respective files, but this is a start.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231102155223.2298316-1-jani.nikula@intel.com

drm/i915/display: Support PSR entry VSC packet to be transmitted one frame earlier

Display driver shall read DPCD 00071h[3:1] during configuration
to get PSR setup time. This register provides the setup time
requirement on the VSC SDP entry packet. If setup time cannot be
met with the current timings
(e.g., PSR setup time + other blanking requirements > blanking time),
driver should enable sending VSC SDP one frame earlier before sending
the capture frame.

BSpec: 69895 (PSR Entry Setup Frames 17:16)

v2: Write frames before su entry to correct register (Ville, Jouni)
    Move frames before su entry calculation to it's
    own function (Ville, Jouni)
    Rename PSR Entry Setup Frames register to indicate
    Lunarlake specificity (Jouni)
v3: Modify setup entry frames calculation function to
    return the actual frames (Ville)
    Match comment with actual implementation (Jouni)
v4: Drop "set" from function naming (Jouni, Ville)
    Use i915 instead of dev_priv (Jouni)

Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231106114228.146574-1-mika.kahola@intel.com

drm/i915/dp_mst: Disable DSC on ICL MST outputs

Enabling DSC on ICL MST outputs is broken leading to FIFO pipe /
transcoder underruns and blank screen. On TGL+ platforms MST/DSC works -
after fixing the known issues in [1] - however to make this work on ICL
requires more work.

So far DSC on MST probably didn't get enabled for users - due to an issue
fixed by [2] - but after fixing that, DSC could get enabled, leading to a
blank screen in ICL/MST configurations which do work atm. To prevent
this disable MST/DSC on ICL for now.

[1] https://lore.kernel.org/all/20231030155843.2251023-1-imre.deak@intel.com
[2] https://lore.kernel.org/all/20231030155843.2251023-31-imre.deak@intel.com

v2 (Ville):
- Use DISPLAY_VER >= 12 instead of > 11.
- Explain the ICL DSC issue in code comment.

Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231102194434.2634786-1-imre.deak@intel.com

drm/i915/tc: Fix -Wformat-truncation in intel_tc_port_init

Fix below compiler warning:

intel_tc.c:1879:11: error: ‘%d’ directive output may be truncated
writing between 1 and 11 bytes into a region of size 3
[-Werror=format-truncation=]
"%c/TC#%d", port_name(port), tc_port + 1);
           ^~
intel_tc.c:1878:2: note: ‘snprintf’ output between 7 and 17 bytes
into a destination of size 8
  snprintf(tc->port_name, sizeof(tc->port_name),
  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    "%c/TC#%d", port_name(port), tc_port + 1);
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

v2: use kasprintf(Imre)
v3: use const for port_name, and fix tc mem leak(Imre)

Fixes: 3eafcddf766b ("drm/i915/tc: Move TC port fields to a new intel_tc_port struct")
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231026125636.5080-1-nirmoy.das@intel.com

drm/i915: Move for_each_engine* out of i915_drv.h

Iterators operate on struct intel_gt so lets move it to intel_gt.h in
order to make i915_drv.h less of a dumping ground for stuff.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231102093248.362659-2-tvrtko.ursulin@linux.intel.com

drm/i915: Remove unused for_each_uabi_class_engine

Unused macro after 99919be74aa3 ("drm/i915/gem: Zap the i915_gem_object_blt code")
removed some code.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231102093248.362659-1-tvrtko.ursulin@linux.intel.com

drm/i915/dsi: Extract port_ctrl_reg()

The code to determine the pre-ICL DSI port control register is
repeated several times. Consolidate.

vlv_dsi_clear_device_ready() is left with the open-coded version
due to the weirdness with port A vs. C on VLV/CHV.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231101114212.9345-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/dsi: Remove dead GLK checks

GLK has its own glk_dsi_clear_device_ready() so remove
the dead GLK checks from vlv_dsi_clear_device_ready().
Sadly BXT still uses vlv_dsi_clear_device_ready() so the
code still looks like a mess due to the difference in VLV/CHV
vs. BXT port A/C shenanigans.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231101114212.9345-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Extract mchbar_reg()

Stop repeating the same logic to determine the correct
config space register for MCHBAR.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231101114212.9345-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Stop using a 'reg' variable

'reg' is a very non-descriptive name. Just get rid of the silly
local variable and spell out the full register name always.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231101114212.9345-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Extract hsw_chicken_trans_reg()

We have the same code to determine the CHICKEN_TRANS register
offset sprinkled in a dozen places. Hoover it up into a small
helper.

TODO: find a better home for this

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231101114212.9345-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/display: Use intel_bo_to_drm_bo instead of obj->base

We are preparing for Xe. Xe_bo doesn't have obj->base. Due to this
use intel_bo_to_drm_bo instead in intel_prepare_plane_fb.

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231102112219.1039362-1-jouni.hogander@intel.com

drm/i915: Bump GLK CDCLK frequency when driving multiple pipes

On GLK CDCLK frequency needs to be at least 2*96 MHz when accessing
the audio hardware. Currently we bump the CDCLK frequency up
temporarily (if not high enough already) whenever audio hardware
is being accessed, and drop it back down afterwards.

With a single active pipe this works just fine as we can switch
between all the valid CDCLK frequencies by changing the cd2x
divider, which doesn't require a full modeset. However with
multiple active pipes the cd2x divider trick no longer works,
and thus we end up blinking all displays off and back on.

To avoid this let's just bump the CDCLK frequency to >=2*96MHz
whenever multiple pipes are active. The downside is slightly
higher power consumption, but that seems like an acceptable
tradeoff. With a single active pipe we can stick to the current
more optiomal (from power comsumption POV) behaviour.

Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9599
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231031160800.18371-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/display: Use dma_fence interfaces instead of i915_sw_fence

We are preparing for Xe driver. Xe driver doesn't have i915_sw_fence
implementation. Lets drop i915_sw_fence usage from display code and
use dma_fence interfaces directly.

For this purpose stack dma fences from related objects into new plane
state. Drm_gem_plane_helper_prepare_fb can be used for fences in new
fb. Separate local implementation is used for Stacking fences from old fb
into new plane state. Then wait for these stacked fences during atomic
commit. There is no be need for separate GPU reset handling in
intel_atomic_commit_fence_wait as the fences are signaled when GPU hang is
detected and GPU is being reset.

v4:
  - Drop to_new_plane_state suffix from add_dma_resv_fences
  - Use dma_resv_usage_rw(false) (DMA_RESV_USAGE_WRITE)
v3:
  - Rename add_fences and it's parameters
  - Remove signaled check
  - Remove waiting old_plane_state fences
v2:
  - Add fences from old fb into new_plane_state->uapi.fence rather than
    into old_plane_state->uapi.fence

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231031084557.1181630-1-jouni.hogander@intel.com

drm/i915/mst: Always write CHICKEN_TRANS

Since we're asked to disable FECSTALL_DIS_DPTSTREAM_DPTTG when
the transcoder is disabled it seems prudent to also clear it
when enabliing the transcoder w/o FEC, just in case
someone else left it enabled by mistake.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231018154123.5479-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/mst: Clear ACT just before triggering payload allocation

Follow the bspec sequence more closely and clear ACT sent just
before triggering the allocation. Can't see why we'd want to
deviate from the spec sequence here.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231018154123.5479-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/mst: Disable transcoder before deleting the payload

Bspec tells us that we should disable the transcoder before
deleting the payload. Looks like this has been reversed since
MST support was added.

I suppose this shouldn't matter in practice since the downstream
device shouldn't really do anything with the new payload until
we send the ACT. But I see no compelling reason to deviate from
the bspec sequence regardless.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231018154123.5479-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/mst: Swap TRANSCONF vs. FECSTALL_DIS_DPTSTREAM_DPTTG disable

The DP modeset sequence asks us to disable TRANSCONF before clearing
the FECSTALL_DIS_DPTSTREAM_DPTTG bit, although we are still asked
to wait for the transcoder to stop only after both steps have
been done.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231018154123.5479-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/mtl: Apply notify_guc to all GTs

Handle platforms with multiple GTs by iterate over all GTs.
Add a Fixes commit so this gets propagated for MTL support.

Fixes: 213c43676beb ("drm/i915/mtl: Remove the 'force_probe' requirement for Meteor Lake")
Suggested-by: John Harrison <john.c.harrison@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231025102826.16955-1-nirmoy.das@intel.com

drm/i915/hdcp: Add more conditions to enable hdcp

When we dock a monitor we end up with a enable and disable connector
cycle but if hdcp content is running we get the userspace in
enabled state and driver maintaining a undesired state which causes
the content to stop playing and we only enable hdcp if the userspace
state in desired. This patch fixes that.

--v2
-Move code to intel_hdcp [Jani]

Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231026121139.987437-4-suraj.kandpal@intel.com

drm/i915/hdcp: Convert intel_hdcp_enable to a blanket function

Let's convert intel_hdcp_enable to a blanket function
which just has some conditions which needs to be checked
before connectors enable hdcp.
This cleans up code and avoids code duplication.

--v3
-Keep function name as intel_hdcp_enable() [Jani]

Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231026121139.987437-3-suraj.kandpal@intel.com

drm/i915/hdcp: Rename HCDP 1.4 enablement function

Rename hdcp 1.4 enablement function from _intel_hdcp_enable to
intel_hdcp1_enable to better represent what version of hdcp is
being enabled

Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231026121139.987437-2-suraj.kandpal@intel.com

drm/i915: Move the g45 PEG band gap HPD workaround to the HPD code

We are asked to reprogram PEG_BAND_GAP_DATA prior to enabling
hotplug detection on the g45 HDMI/DP ports. Currently we do said
reprogamming from the DP/HDMI connector initialization functions.
That code should be mostly platform agnostic so clearly not the
best place for this. Move the workaround to the place where we
actually enable HPD detection.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231012124033.26983-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Extract _intel_{enable,disable}_shared_dpll()

We have a bit of duplicated code around the DPLL disabling. Extract
that to a new function, and for symmetry also do the same for the
enable direction.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231012123522.26045-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Move the DPLL extra power domain handling up one level

The extra DPLL power domain is currently handled in three places:
- combo_pll_enable()
- combo_pll_disable()
- readout_dpll_hw_state()

First two of those are low level PLL funcs, but the third is a higher
level thing. So the current situation is rather inconsistent. Unify
this by moving the PLL enable/disable up one level. This also means
the extra power domain could be trivially be used by other platforms
as well.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231012123522.26045-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Abstract the extra JSL/EHL DPLL4 power domain better

Just include the JSL/EHL DPLL4 extra power domain in the dpll_info
struct. This way the same approach could be used by other platforms
as well (should the need arise), and we don't have to sprinkle
platform checks all over the place.

Note that I'm perhaps slightly abusing things here as
power_domain==0 (which is actually POWER_DOMAIN_DISPLAY_CORE) now
indicates that no extra power domain is needed. I suppose using
POWER_DOMAIN_INVALID would be more correct, but then we'd have to
sprinkle that to all the other DPLLs.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231012123522.26045-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Use named initializers for DPLL info

Use named initializers when populating the DPLL info. This
is just more convenient and less error prone as we no longer
have to keep the initializers in a specific order.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231012123522.26045-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/bios: Clamp VBT HDMI level shift on BDW

Apparently some BDW machines (eg. HP Pavilion 15-ab) shipped with
a VBT inherited from some earlier HSW model. On HSW the HDMI level
shift value could go up to 11, whereas on BDW the maximum value is
9.

The DDI code does clamp the bogus value, but it does so with
a WARN which we don't really want. To avoid that let's just sanitize
the bogus VBT HDMI level shift value ahead of time for all BDW machines.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9461
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231013140214.1713-1-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>

drm/i915: move Makefile display debugfs files next to display

Keep the display build lists together.

v2: Rebase

Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231026101333.875406-2-jani.nikula@intel.com

drm/i915: fix Makefile sort and indent

Unify the line continuations and indents, and sort the build lists.

Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231026101333.875406-1-jani.nikula@intel.com

drm/i915/mtl: Support HBR3 rate with C10 phy and eDP in MTL

eDP specification supports HBR3 link rate since v1.4a. Moreover,
C10 phy can support HBR3 link rate for both DP and eDP. Therefore,
do not clamp the supported rates for eDP at 6.75Gbps.

Cc: <stable@vger.kernel.org>
BSpec: 70073 74224

Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231018113622.2761997-1-chaitanya.kumar.borah@intel.com

drm/i915/display: Abstract C10/C20 pll calculation

As done with the hw readout, properly abstract the C10/C20 phy details
inside intel_cx0_phy.c.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231018222831.4132968-3-lucas.demarchi@intel.com

drm/i915/display: Abstract C10/C20 pll hw readout

intel_cx0_phy.[ch] should contain the details about C10/C20, not leaking
it to the rest of the driver. Start abstracting this by exporting a
single PLL hw readout that handles the differences between C20 and C10
internally to that compilation unit.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231018222831.4132968-2-lucas.demarchi@intel.com

drm/i915/lnl: Fix check for TC phy

With MTL adding PICA between the port and the real phy, the path
add for DG2 stopped being followed and newer platforms are simply using
the older path for TC phys. LNL is no different than MTL in this aspect,
so just add it to the mess. In future the phy and port designation and
deciding if it's TC should better be cleaned up.

To make it just a bit better, also change intel_phy_is_snps() to show
this is DG2-only.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231026184045.1015655-3-lucas.demarchi@intel.com

drm/i915/lnl: Extend C10/C20 phy

For Lunar Lake, DDI-A is connected to C10 PHY, while TC1-TC3 are connected
to C20 phy, like in Meteor Lake. Update the check in intel_is_c10phy()
accordingly.

This reverts the change in commit e388ae97e225 ("drm/i915/display:
Eliminate IS_METEORLAKE checks") that turned that into a display engine
version check. The phy <-> port connection is very SoC-specific and not
related to that version.

IS_LUNARLAKE() is defined to 0 in i915 as it's expected that the
(upcoming) xe driver is the one defining the platform, with i915 only
driving the display side.

Bspec: 70818
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231026184045.1015655-2-lucas.demarchi@intel.com

drm/i915/sprite: move sprite_name() to intel_sprite.c

Move sprite_name() where its only user is, and convert it to a function,
removing the implicit dev_priv usage.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231011202259.1090131-1-jani.nikula@intel.com

drm/i915/display: Reset message bus after each read/write operation

Every know and then we receive the following error when running
for example IGT test kms_flip.

[drm] *ERROR* PHY G Read 0d80 failed after 3 retries.
[drm] *ERROR* PHY G Write 0d81 failed after 3 retries.

Since the error is sporadic in nature, the patch proposes
to reset the message bus after every successful or unsuccessful
read or write operation.

v2: Add FIXME's to indicate the experimental nature of
    this workaround (Rodrigo)
v3: Dropping the additional delay as moving reset to *_read_once()
    and *_write_once() functions seem unnecessary delay

Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231016125544.719963-1-mika.kahola@intel.com

drm/i915: remove display device info from i915 capabilities

Display device and display runtime info is exposed as part of
i915_display_capabilities debugfs entry. Remove this information
from i915_ capabilities as it is now reduntant.

Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231018102723.16915-3-vinod.govindapillai@intel.com

drm/i915/display: Move enable_dp_mst under display

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231024124109.384973-24-jouni.hogander@intel.com

drm/i915/display: Move nuclear_pageflip under display

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231024124109.384973-23-jouni.hogander@intel.com

drm/i915/display: Move verbose_state_checks under display

v2: Change device parameter permissions to 0400

Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231024124109.384973-22-jouni.hogander@intel.com

drm/i915/display: Use device parameters instead of module in I915_STATE_WARN

Also make module parameter as non writable.

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231024124109.384973-21-jouni.hogander@intel.com

drm/i915/display: Move disable_display parameter under display

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231024124109.384973-20-jouni.hogander@intel.com

drm/i915/display: Move force_reset_modeset_test parameter under display

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231024124109.384973-19-jouni.hogander@intel.com

drm/i915/display: Move load_detect_test parameter under display

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231024124109.384973-18-jouni.hogander@intel.com

drm/i915/display: Move enable_dpcd_backlight module parameter under display

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231024124109.384973-17-jouni.hogander@intel.com

drm/i915/display: Move edp_vswing module parameter under display

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231024124109.384973-16-jouni.hogander@intel.com

drm/i915/display: Move invert_brightness module parameter under display

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231024124109.384973-15-jouni.hogander@intel.com

drm/i915/display: Move enable_ips module parameter under display

Move enable_ips module parameter under display and change it as boolean.

v2:
  - Change enable_ip as boolean
  - Fix copy paste error (i915_param -> intel_display_param)

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231024124109.384973-14-jouni.hogander@intel.com

drm/i915/display: Move disable_power_well module parameter under display

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231024124109.384973-13-jouni.hogander@intel.com

drm/i915/display: Move enable_sagv module parameter under display

Move enable_sagv module parameter under display and change the parameter
permissions to non-writblase (0400)

v2: Change permissions to 0400

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231024124109.384973-12-jouni.hogander@intel.com

drm/i915/display: Move enable_dpt module parameter under display

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231024124109.384973-11-jouni.hogander@intel.com

drm/i915/display: Move enable_dc module parameter under display

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231024124109.384973-10-jouni.hogander@intel.com

drm/i915/display: Move vbt_sdvo_panel_type module parameter under display

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231024124109.384973-9-jouni.hogander@intel.com

drm/i915/display: Move panel_use_ssc module parameter under display

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231024124109.384973-8-jouni.hogander@intel.com