Loic Poulain [Mon, 24 Aug 2020 16:53:55 +0000 (18:53 +0200)]
wcn36xx: Fix software-driven scan
For software-driven scan, rely on mac80211 software scan instead
of internal driver implementation. The internal implementation
cause connection trouble since it keep the antenna busy during
the entire scan duration, moreover it's only a passive scanning
(no probe request). Therefore, let mac80211 manages sw scan.
Note: we fallback to software scan if firmware does not report
scan offload support or if we need to scan the 5Ghz band (currently
not supported by the offload scan...).
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1598288035-19790-1-git-send-email-loic.poulain@linaro.org
Tamizh Chelvam [Wed, 19 Aug 2020 17:55:38 +0000 (20:55 +0300)]
ath10k: Add new api to support reset TID config
Add ops for reset_tid_config to support reset TID
configuration. This send default configuration to the
target for the TIDs and stores default value in the host.
Tested-on: QCA9984 hw1.0 PCI 10.4-3.9.0.2-00021
Signed-off-by: Tamizh Chelvam <tamizhr@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1593875614-5683-5-git-send-email-tamizhr@codeaurora.org
Tamizh Chelvam [Wed, 19 Aug 2020 17:55:38 +0000 (20:55 +0300)]
ath10k: Add new api to support TID specific configuration
This patch add ops for set_tid_config to support TID
specific configuration. Station specific TID configuration
will have more priority than vif specific TID configuration.
WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT service flag introduced
to notify host for TID config support. And RTS_CTS extended tid
configuration support advertised through the service flag
WMI_10_4_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT.
TID specific noack configuration requires
aggregation should be disabled and rate for the data TID packets
should be basic rates. So, if the TID already configured
with noack policy then driver will ignore the aggregation
or TX rate related configuration for the same data TID.
In TX rate configuration should be applied with highest
preamble configuration(HT rates should not be applied
for the station which supports vht rates).
Tested-on: QCA9984 hw1.0 PCI 10.4-3.9.0.2-00021
Signed-off-by: Tamizh Chelvam <tamizhr@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1593875614-5683-4-git-send-email-tamizhr@codeaurora.org
Tamizh Chelvam [Wed, 19 Aug 2020 17:55:38 +0000 (20:55 +0300)]
ath10k: Move rate mask validation function up in the file
This patch does not have any functional changes.
Tested-on: QCA9984 hw1.0 PCI 10.4-3.9.0.2-00021
Signed-off-by: Tamizh Chelvam <tamizhr@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1593875614-5683-3-git-send-email-tamizhr@codeaurora.org
Tamizh Chelvam [Wed, 19 Aug 2020 17:55:37 +0000 (20:55 +0300)]
ath10k: Add wmi command support for station specific TID config
This patch adds WMI interface to configure station specific
TID configuration . Host needs to send station's MAC address
along with TID number and its configuration to target through
WMI_10_4_PER_PEER_PER_TID_CONFIG_CMDID.
WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT flag is added to advertise
this support.
Tested-on: QCA9984 hw1.0 PCI 10.4-3.9.0.2-00021
Signed-off-by: Tamizh Chelvam <tamizhr@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1593875614-5683-2-git-send-email-tamizhr@codeaurora.org
Wen Gong [Tue, 18 Aug 2020 14:12:02 +0000 (17:12 +0300)]
ath10k: sdio: add firmware coredump support
When firmware crashes it's possible to create a coredump for later analysis,
add support to collect the register and memory info from SDIO devices.
The coredump configuration is different between QCA6174 PCI and QCA6174 SDIO,
so add specific registers and memory regions for the latter.
QCA6174 SDIO has two methods to dump the firmware: fastdump and slowdump.
Fastdump is not supported in olded versions of firmware, and for these ath10k
will automatically select slowdump. If firmware supports fastdump, ath10k will
automatically select it. QCA6174 SDIO firmware version
WLAN.RMH.4.4.1-00017-QCARMSWPZ-2 is the first version supporting fastdump.
For slowdump, ath10k_sdio_hif_diag_read() can not be used as the diag
window has a limit value, it is 4 bytes and the dump's buffer length is larger
than it, it will trigger error. So this patch adds ath10k_sdio_read_mem() to
read 4 bytes for each time.
Example output of a firmware crash:
ath10k_sdio mmc1:0001:1: simulating soft firmware crash
ath10k_sdio mmc1:0001:1: firmware crashed! (guid
413d98b1-84c0-4298-b605-
2b10ec0c54a5)
ath10k_sdio mmc1:0001:1: qca6174 hw3.2 sdio target 0x05030000 chip_id 0x00000000 sub 0000:0000
ath10k_sdio mmc1:0001:1: kconfig debug 1 debugfs 1 tracing 1 dfs 0 testmode 1
ath10k_sdio mmc1:0001:1: firmware ver WLAN.RMH4.4.1-00126-QCARMSWP-1 api 6 features wowlan,ignore-otp,raw-mode crc32
b84317cf
ath10k_sdio mmc1:0001:1: board_file api 2 bmi_id 0:4 crc32
6364cfcc
ath10k_sdio mmc1:0001:1: htt-ver 3.69 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
ath10k_sdio mmc1:0001:1: firmware register dump:
ath10k_sdio mmc1:0001:1: [00]: 0x05030000 0x000015B3 0x0099908D 0x00955B31
ath10k_sdio mmc1:0001:1: [04]: 0x0099908D 0x00060730 0x00000018 0x004641A0
ath10k_sdio mmc1:0001:1: [08]: 0x0041FAA4 0x0041FA9C 0x00999070 0x00404490
ath10k_sdio mmc1:0001:1: [12]: 0x00000009 0xFFFFFFFF 0x00952CD0 0x00952CE6
ath10k_sdio mmc1:0001:1: [16]: 0x00952CC4 0x00910712 0x00000000 0x00000000
ath10k_sdio mmc1:0001:1: [20]: 0x4099908D 0x0040E9E8 0x00000001 0x00423AC0
ath10k_sdio mmc1:0001:1: [24]: 0x809F3189 0x0040EA48 0x00426240 0xC099908D
ath10k_sdio mmc1:0001:1: [28]: 0x809143A7 0x0040EA68 0x0041FAA4 0x00423A80
ath10k_sdio mmc1:0001:1: [32]: 0x809F1193 0x0040EA88 0x00411770 0x004117E0
ath10k_sdio mmc1:0001:1: [36]: 0x809F0EEE 0x0040EAA8 0x00000000 0x00000000
ath10k_sdio mmc1:0001:1: [40]: 0x80911210 0x0040EAC8 0x00000008 0x00404130
ath10k_sdio mmc1:0001:1: [44]: 0x80911154 0x0040EB28 0x00400000 0x00000000
ath10k_sdio mmc1:0001:1: [48]: 0x8091122D 0x0040EB48 0x00000000 0x00400600
ath10k_sdio mmc1:0001:1: [52]: 0x40910024 0x0040EB78 0x0040AB98 0x0040AB98
ath10k_sdio mmc1:0001:1: [56]: 0x00000000 0x0040EB98 0x009BB001 0x00040020
Tested-on: QCA6174 SDIO WLAN.RMH.4.4.1-00018-QCARMSWP-1
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1569310030-834-3-git-send-email-wgong@codeaurora.org
Wen Gong [Tue, 18 Aug 2020 14:12:00 +0000 (17:12 +0300)]
ath10k: add bus type for each layout of coredump
For some hw version, it has more than one bus type, it need to add bus
type to distinguish different chip.
Tested-on: QCA6174 SDIO WLAN.RMH.4.4.1-00018-QCARMSWP-1
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1569310030-834-2-git-send-email-wgong@codeaurora.org
Kalle Valo [Tue, 18 Aug 2020 13:17:20 +0000 (16:17 +0300)]
Merge ath-next from git://git./linux/kernel/git/kvalo/ath.git
ath.git patches for v5.10. Major changes:
ath11k
* add support for QCA6390 PCI devices
wcn36xx
* add support for TX ack
ath9k
* add support for NL80211_EXT_FEATURE_CAN_REPLACE_PTK0 to improve PTK0
rekeying
Tom Rix [Tue, 11 Aug 2020 14:02:19 +0000 (07:02 -0700)]
rndis_wlan: tighten check of rndis_query_oid return
clang static analysis reports this problem
rndis_wlan.c:3147:25: warning: Assigned value is garbage or undefined
wiphy->max_num_pmkids = le32_to_cpu(caps.num_pmkids);
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The setting of caps happens here, with a call to rndis_query_oid()
retval = rndis_query_oid(usbdev,
if (retval >= 0) {
Reviewing rndis_query_oid() shows that on success 0 is returned,
failure is otherwise. So the retval check is not tight enough.
So tighten the retval check. Similar problem in
rndis_wlan_get_caps().
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200811140219.8412-1-trix@redhat.com
Christophe JAILLET [Sun, 9 Aug 2020 09:29:06 +0000 (11:29 +0200)]
mwifiex: Do not use GFP_KERNEL in atomic context
A possible call chain is as follow:
mwifiex_sdio_interrupt (sdio.c)
--> mwifiex_main_process (main.c)
--> mwifiex_process_cmdresp (cmdevt.c)
--> mwifiex_process_sta_cmdresp (sta_cmdresp.c)
--> mwifiex_ret_802_11_scan (scan.c)
--> mwifiex_parse_single_response_buf (scan.c)
'mwifiex_sdio_interrupt()' is an interrupt function.
Also note that 'mwifiex_ret_802_11_scan()' already uses GFP_ATOMIC.
So use GFP_ATOMIC instead of GFP_KERNEL when memory is allocated in
'mwifiex_parse_single_response_buf()'.
Fixes:
7c6fa2a843c5 ("mwifiex: use cfg80211 dynamic scan table and cfg80211_get_bss API")
or
Fixes:
601216e12c65e ("mwifiex: process RX packets in SDIO IRQ thread directly")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200809092906.744621-1-christophe.jaillet@wanadoo.fr
Christophe JAILLET [Thu, 6 Aug 2020 21:04:31 +0000 (23:04 +0200)]
adm8211: switch from 'pci_' to 'dma_' API
The wrappers in include/linux/pci-dma-compat.h should go away.
The patch has been generated with the coccinelle script below and has been
hand modified to replace GFP_ with a correct flag.
It has been compile tested.
When memory is allocated in 'adm8211_alloc_rings()', GFP_KERNEL can be used
because it is called only from the probe function and no lock is acquired.
Moreover, GFP_KERNEL is already used just a few lines above in a kmalloc.
@@
@@
- PCI_DMA_BIDIRECTIONAL
+ DMA_BIDIRECTIONAL
@@
@@
- PCI_DMA_TODEVICE
+ DMA_TO_DEVICE
@@
@@
- PCI_DMA_FROMDEVICE
+ DMA_FROM_DEVICE
@@
@@
- PCI_DMA_NONE
+ DMA_NONE
@@
expression e1, e2, e3;
@@
- pci_alloc_consistent(e1, e2, e3)
+ dma_alloc_coherent(&e1->dev, e2, e3, GFP_)
@@
expression e1, e2, e3;
@@
- pci_zalloc_consistent(e1, e2, e3)
+ dma_alloc_coherent(&e1->dev, e2, e3, GFP_)
@@
expression e1, e2, e3, e4;
@@
- pci_free_consistent(e1, e2, e3, e4)
+ dma_free_coherent(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_map_single(e1, e2, e3, e4)
+ dma_map_single(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_single(e1, e2, e3, e4)
+ dma_unmap_single(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4, e5;
@@
- pci_map_page(e1, e2, e3, e4, e5)
+ dma_map_page(&e1->dev, e2, e3, e4, e5)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_page(e1, e2, e3, e4)
+ dma_unmap_page(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_map_sg(e1, e2, e3, e4)
+ dma_map_sg(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_sg(e1, e2, e3, e4)
+ dma_unmap_sg(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
+ dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_single_for_device(e1, e2, e3, e4)
+ dma_sync_single_for_device(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
+ dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_sg_for_device(e1, e2, e3, e4)
+ dma_sync_sg_for_device(&e1->dev, e2, e3, e4)
@@
expression e1, e2;
@@
- pci_dma_mapping_error(e1, e2)
+ dma_mapping_error(&e1->dev, e2)
@@
expression e1, e2;
@@
- pci_set_dma_mask(e1, e2)
+ dma_set_mask(&e1->dev, e2)
@@
expression e1, e2;
@@
- pci_set_consistent_dma_mask(e1, e2)
+ dma_set_coherent_mask(&e1->dev, e2)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200806210431.736050-1-christophe.jaillet@wanadoo.fr
Colin Ian King [Thu, 6 Aug 2020 12:08:03 +0000 (13:08 +0100)]
rtw88: fix spelling mistake: "unsupport" -> "unsupported"
There are some spelling mistakes in rtw_info messages. Fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200806120803.60113-1-colin.king@canonical.com
Colin Ian King [Thu, 6 Aug 2020 11:33:26 +0000 (12:33 +0100)]
wl1251, wlcore: fix spelling mistake "buld" -> "build"
There are spelling mistakes in warning messages. Fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200806113326.53779-1-colin.king@canonical.com
Tom Rix [Sun, 2 Aug 2020 16:18:04 +0000 (09:18 -0700)]
brcmfmac: check ndev pointer
Clang static analysis reports this error
brcmfmac/core.c:490:4: warning: Dereference of null pointer
(*ifp)->ndev->stats.rx_errors++;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In this block of code
if (ret || !(*ifp) || !(*ifp)->ndev) {
if (ret != -ENODATA && *ifp)
(*ifp)->ndev->stats.rx_errors++;
brcmu_pkt_buf_free_skb(skb);
return -ENODATA;
}
(*ifp)->ndev being NULL is caught as an error
But then it is used to report the error.
So add a check before using it.
Fixes:
91b632803ee4 ("brcmfmac: Use net_device_stats from struct net_device")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200802161804.6126-1-trix@redhat.com
Andy Shevchenko [Thu, 30 Jul 2020 15:53:27 +0000 (18:53 +0300)]
brcmfmac: use %*ph to print small buffer
Use %*ph format to print small buffer as hex string.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200730155327.40130-1-andriy.shevchenko@linux.intel.com
Wang Yufen [Mon, 20 Jul 2020 09:36:05 +0000 (17:36 +0800)]
brcm80211: fix possible memleak in brcmf_proto_msgbuf_attach
When brcmf_proto_msgbuf_attach fail and msgbuf->txflow_wq != NULL,
we should destroy the workqueue.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1595237765-66238-1-git-send-email-wangyufen@huawei.com
Gustavo A. R. Silva [Mon, 27 Jul 2020 19:44:15 +0000 (14:44 -0500)]
ath11k: Use fallthrough pseudo-keyword
Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.
[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200727194415.GA1275@embeddedor
Wang Yufen [Mon, 20 Jul 2020 09:36:44 +0000 (17:36 +0800)]
ath11k: Fix possible memleak in ath11k_qmi_init_service
When qmi_add_lookup fail, we should destroy the workqueue
Fixes:
d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1595237804-66297-1-git-send-email-wangyufen@huawei.com
Sathishkumar Muruganandam [Fri, 14 Aug 2020 08:16:11 +0000 (13:46 +0530)]
ath10k: fix VHT NSS calculation when STBC is enabled
When STBC is enabled, NSTS_SU value need to be accounted for VHT NSS
calculation for SU case.
Without this fix, 1SS + STBC enabled case was reported wrongly as 2SS
in radiotap header on monitor mode capture.
Tested-on: QCA9984 10.4-3.10-00047
Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1597392971-3897-1-git-send-email-murugana@codeaurora.org
Rakesh Pillai [Fri, 26 Jun 2020 17:53:01 +0000 (23:23 +0530)]
ath10k: Register shutdown handler
As a part of device shutdown the smmu driver will be
stopped and henceforth any IOVA address translation
will not be done. The wlan driver, being one of the
smmu driver consumer, should stop all the dma related
activity as a part of shutdown, and thereby ensuring
that no dma activity is done once the smmu driver
shuts down.
During the device shutdown, the smmu calls shutdown
for all its consumers in order to indicate them to
stop all their dma activities.
Register the shutdown handler to stop the wlan
driver and avoid any dma operations.
Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.1-01040-QCAHLSWMTPLZ-1
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1593193981-30161-1-git-send-email-pillair@codeaurora.org
Carl Huang [Mon, 17 Aug 2020 10:31:55 +0000 (13:31 +0300)]
ath11k: reset MHI during power down and power up
For QCA6390, normal power up and power down can't bring MHI
to a workable state. This happens especially in warm reboot
and rmmod and insmod. Host needs to write a few registers to
bring MHI to normal state.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2
Signed-off-by: Carl Huang <cjhuang@codeauroro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1597555891-26112-10-git-send-email-kvalo@codeaurora.org
Carl Huang [Mon, 17 Aug 2020 10:31:55 +0000 (13:31 +0300)]
ath11k: use TCL_DATA_RING_0 for QCA6390
For QCA6390, wbm2sw1 is used for other purpose rather than
tx completion ring. So use TCL_DATA_RING 0 only for QCA6390.
Add MISC_CAPS_TCL_0_ONLY to control it.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1597555891-26112-9-git-send-email-kvalo@codeaurora.org
Carl Huang [Mon, 17 Aug 2020 10:31:54 +0000 (13:31 +0300)]
ath11k: process both lmac rings for QCA6390
For QCA6390, the num_radios is 1 but it needs to process 2 lmac rings.
So use NUM_RXDMA_PER_PDEV to do another loop.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1597555891-26112-8-git-send-email-kvalo@codeaurora.org
Carl Huang [Mon, 17 Aug 2020 10:31:54 +0000 (13:31 +0300)]
ath11k: assign correct search flag and type for QCA6390
QCA6390 doesn't enable V2 map and ummap event, so the addr search
flags and type is different from IPQ8074. Assign correct search flags
and type for QCA6390.
Without this change, ping sometimes fails. With this change, now ping
is always successful.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1597555891-26112-7-git-send-email-kvalo@codeaurora.org
Carl Huang [Mon, 17 Aug 2020 10:31:53 +0000 (13:31 +0300)]
ath11k: delay vdev_start for QCA6390
For QCA6390 firmware, bss peer must be created before vdev_start, so delay
vdev_start until bss peer is created.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1597555891-26112-6-git-send-email-kvalo@codeaurora.org
Carl Huang [Mon, 17 Aug 2020 10:31:53 +0000 (13:31 +0300)]
ath11k: refine the phy_id check in ath11k_reg_chan_list_event
For QCA6390, it processes the reg chan list event only for phy0,
and it goes to fallback if the phy_id is not valid. For a valid
phy_id but not 0, just discard the event.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1597555891-26112-5-git-send-email-kvalo@codeaurora.org
Carl Huang [Mon, 17 Aug 2020 10:31:53 +0000 (13:31 +0300)]
ath11k: setup QCA6390 rings for both rxdmas
For QCA6390, only one pdev is created and this pdev manages both lmacs, thus
both rxdmas. So host needs to initialize all rxdma related rings for one pdev.
Another difference is for QCA6390, host fills rxbuf to firmware and firmware
further fills the rxbuf to rxbuf ring for each rxdma.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1597555891-26112-4-git-send-email-kvalo@codeaurora.org
Carl Huang [Mon, 17 Aug 2020 10:31:52 +0000 (13:31 +0300)]
ath11k: don't initialize rxdma1 related ring
For QCA6390, it has 2 lmacs and thus 2 rxdmas. However, each rxdma has rxdma0
only, and doesn't have rxdma1. So for QCA6390, don't initialize rxdma1 related
rings such as rx_mon_buf_ring, rx_mon_dst_ring and rx_mon_desc_ring.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1597555891-26112-3-git-send-email-kvalo@codeaurora.org
Carl Huang [Mon, 17 Aug 2020 10:31:52 +0000 (13:31 +0300)]
ath11k: enable DP interrupt setup for QCA6390
QCA6390 uses MSI interrupt, so need to configure msi_add and
msi_data to dp srngs. As there are so many DP srngs, so need
to group them. Each group shares one MSI interrupt.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1597555891-26112-2-git-send-email-kvalo@codeaurora.org
Carl Huang [Mon, 17 Aug 2020 10:31:52 +0000 (13:31 +0300)]
ath11k: dp: redefine peer_map and peer_unmap
For QCA6390, it uses peer_map and peer_unmap V1. IPQ8074 uses V2.
Redefine previous definition to peer_map2 and peer_unmap2.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1597576599-8857-13-git-send-email-kvalo@codeaurora.org
Carl Huang [Mon, 17 Aug 2020 10:31:51 +0000 (13:31 +0300)]
ath11k: wmi: put hardware to DBS mode
For QCA6390, host puts hardware to Dual Band Simultaneous (DBS) mode by default
so both 2G and 5G bands can be used. Otherwise only the 5G band can be used.
QCA6390 doesn't provide band_to_mac configuration and firmware will do the
band_to_mac map.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1597576599-8857-12-git-send-email-kvalo@codeaurora.org
Carl Huang [Mon, 17 Aug 2020 10:31:51 +0000 (13:31 +0300)]
ath11k: initialize wmi config based on hw_params
QCA6390 has very different wmi config parameters compared to IPQ8074,
so use different function to initialize wmi init config parameters.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1597576599-8857-11-git-send-email-kvalo@codeaurora.org
Carl Huang [Mon, 17 Aug 2020 10:31:50 +0000 (13:31 +0300)]
ath11k: force single pdev only for QCA6390
For QCA6390, only one pdev is created and only one HW is registered to
mac80211. This one pdev manages both 2G radio and 5G radio.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1597576599-8857-10-git-send-email-kvalo@codeaurora.org
Carl Huang [Mon, 17 Aug 2020 10:31:50 +0000 (13:31 +0300)]
ath11k: disable CE interrupt before hif start
Disable CE interrupt otherwise interrupt may come before host
initialized related context. This also fixes unbalanced interrupt
enablement.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1597576599-8857-9-git-send-email-kvalo@codeaurora.org
Carl Huang [Mon, 17 Aug 2020 10:31:50 +0000 (13:31 +0300)]
ath11k: ce: get msi_addr and msi_data before srng setup
Move function to get msi_addr and msi_data before srng setup,
otherwise srng is setup with no MSI configuration.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1597576599-8857-8-git-send-email-kvalo@codeaurora.org
Carl Huang [Mon, 17 Aug 2020 10:31:49 +0000 (13:31 +0300)]
ath11k: hal: assign msi_addr and msi_data to srng
QCA6390 uses MSI interrupt so it needs msi_addr and msi_data
to generate interrupt.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1597576599-8857-7-git-send-email-kvalo@codeaurora.org
Kalle Valo [Mon, 17 Aug 2020 10:31:48 +0000 (13:31 +0300)]
ath11k: ce: remove CE_COUNT() macro
This macro is evil as it's accesses ab variable in a hidden way. It's better
for readibility to access ab->hw_params.ce_count directly.
This is done in a separate patch to keep the patches simple. No functional changes.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1597576599-8857-6-git-send-email-kvalo@codeaurora.org
Kalle Valo [Mon, 17 Aug 2020 10:31:47 +0000 (13:31 +0300)]
ath11k: ce: remove host_ce_config_wlan macro
This macro is evil as it's accesses ab variable in a hidden way. It's better
for readibility to access ab->hw_params.host_ce_config directly.
This is done in a separate patch to keep the patches simple. No functional changes.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1597576599-8857-5-git-send-email-kvalo@codeaurora.org
Carl Huang [Mon, 17 Aug 2020 10:31:47 +0000 (13:31 +0300)]
ath11k: ce: support different CE configurations
QCA6390 uses only 9 Copy Engines while IPQ8074 may use 12, make it possible to
change CE configuration dynamically via hw_params.
The defines for host_ce_config_wlan and CE_COUNT are temporary solutions, they
will be removed in the following patches to keep things simple.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1597576599-8857-4-git-send-email-kvalo@codeaurora.org
Kalle Valo [Mon, 17 Aug 2020 10:31:47 +0000 (13:31 +0300)]
ath11k: hal: cleanup dynamic register macros
Now some of the HAL register macros access ab variable in a hidden way, make ab
variable visible in the macro by adding it as an argument.
This is done in a separate patch to keep the patches simple. No functional changes.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1597576599-8857-3-git-send-email-kvalo@codeaurora.org
Carl Huang [Mon, 17 Aug 2020 10:31:46 +0000 (13:31 +0300)]
ath11k: hal: create register values dynamically
QCA6390 has different register offset compared to IPQ8074, so need to
attach the register offset dynamically based on hw_params.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1597576599-8857-2-git-send-email-kvalo@codeaurora.org
Kalle Valo [Mon, 17 Aug 2020 10:31:40 +0000 (13:31 +0300)]
ath10k: move enable_pll_clk call to ath10k_core_start()
There's no reason to have call for enable_pll_clk in ath10k_bmi_start(), move
it to ath10k_core_start() instead. This way it's possible to call
ath10k_bmi_start() from sdio.c during firmware dump creation. And also the
function call is more visible when it's in core.c.
No functional changes, compile tested only.
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1597421745-4329-1-git-send-email-kvalo@codeaurora.org
Bryan O'Donoghue [Sun, 2 Aug 2020 00:48:24 +0000 (01:48 +0100)]
wcn36xx: Fix reported 802.11n rx_highest rate wcn3660/wcn3680
Qualcomm's document "80-WL007-1 Rev. J" states that the highest rx rate for
the WCN3660 and WCN3680 on MCS 7 is 150 Mbps not the 72 Mbps stated here.
This patch fixes the data-rate declared in the 5GHz table.
Fixes:
8e84c2582169 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680
hardware")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200802004824.1307124-1-bryan.odonoghue@linaro.org
Christophe JAILLET [Sun, 2 Aug 2020 12:22:27 +0000 (14:22 +0200)]
ath10k: Fix the size used in a 'dma_free_coherent()' call in an error handling path
Update the size used in 'dma_free_coherent()' in order to match the one
used in the corresponding 'dma_alloc_coherent()'.
Fixes:
1863008369ae ("ath10k: fix shadow register implementation for WCN3990")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Rakesh Pillai <pillair@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200802122227.678637-1-christophe.jaillet@wanadoo.fr
Gustavo A. R. Silva [Mon, 27 Jul 2020 19:38:21 +0000 (14:38 -0500)]
ath10k: Use fallthrough pseudo-keyword
Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.
[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200727193821.GA981@embeddedor
Dan Carpenter [Thu, 13 Aug 2020 14:12:53 +0000 (17:12 +0300)]
ath9k: Fix potential out of bounds in ath9k_htc_txcompletion_cb()
The value of "htc_hdr->endpoint_id" comes from skb->data so Smatch marks
it as untrusted so we have to check it before using it as an array
offset.
This is similar to a bug that syzkaller found in commit
e4ff08a4d727
("ath9k: Fix use-after-free Write in ath9k_htc_rx_msg") so it is
probably a real issue.
Fixes:
fb9987d0f748 ("ath9k_htc: Support for AR9271 chipset.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200813141253.GA457408@mwanda
Masashi Honma [Sat, 8 Aug 2020 23:32:58 +0000 (08:32 +0900)]
ath9k_htc: Use appropriate rs_datalen type
kernel test robot says:
drivers/net/wireless/ath/ath9k/htc_drv_txrx.c:987:20: sparse: warning: incorrect type in assignment (different base types)
drivers/net/wireless/ath/ath9k/htc_drv_txrx.c:987:20: sparse: expected restricted __be16 [usertype] rs_datalen
drivers/net/wireless/ath/ath9k/htc_drv_txrx.c:987:20: sparse: got unsigned short [usertype]
drivers/net/wireless/ath/ath9k/htc_drv_txrx.c:988:13: sparse: warning: restricted __be16 degrades to integer
drivers/net/wireless/ath/ath9k/htc_drv_txrx.c:1001:13: sparse: warning: restricted __be16 degrades to integer
Indeed rs_datalen has host byte order, so modify it's own type.
Reported-by: kernel test robot <lkp@intel.com>
Fixes:
cd486e627e67 ("ath9k_htc: Discard undersized packets")
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200808233258.4596-1-masashi.honma@gmail.com
Alexander Wetzel [Tue, 4 Aug 2020 16:41:51 +0000 (18:41 +0200)]
ath9k: add NL80211_EXT_FEATURE_CAN_REPLACE_PTK0 support
The ath9k driver was so far only able to rekey PTK0 keys correctly due
to the best effort queue flush added with commit
62872a9b9a10
("mac80211: Fix PTK rekey freezes and clear text leak").
Add the needed queue flush and set NL80211_EXT_FEATURE_CAN_REPLACE_PTK0
to tell mac80211 that the driver can now rekey PTK0 keys correctly and
no longer needs the best effort flush.
Effectively this prevents mac80211 to warn when rekeying a PTK0 key
only.
Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200804164152.175375-1-alexander@wetzel-home.de
Dan Carpenter [Thu, 13 Aug 2020 14:13:15 +0000 (17:13 +0300)]
ath6kl: prevent potential array overflow in ath6kl_add_new_sta()
The value for "aid" comes from skb->data so Smatch marks it as
untrusted. If it's invalid then it can result in an out of bounds array
access in ath6kl_add_new_sta().
Fixes:
572e27c00c9d ("ath6kl: Fix AP mode connect event parsing and TIM updates")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200813141315.GB457408@mwanda
Colin Ian King [Thu, 6 Aug 2020 12:19:58 +0000 (13:19 +0100)]
ath6kl: fix spelling mistake "initilisation" -> "initialization"
There is a spelling mistake in an ath6kl_err error message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200806121958.60700-1-colin.king@canonical.com
Gustavo A. R. Silva [Mon, 27 Jul 2020 19:51:11 +0000 (14:51 -0500)]
ath6kl: Use fallthrough pseudo-keyword
Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1].
[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200727195111.GA1603@embeddedor
Lee Jones [Fri, 14 Aug 2020 11:39:23 +0000 (12:39 +0100)]
ath5k: Fix kerneldoc formatting issue
Kerneldoc expects attributes/parameters to be in '@*.: ' format and
gets confused if the variable does not follow the type/attribute
definitions.
Fixes the following W=1 kernel build warning(s):
drivers/net/wireless/ath/ath5k/base.c:1111: warning: Function parameter or member 'ah' not described in 'ath5k_drain_tx_buffs'
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Nick Kossifidis <mickflemm@gmail.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jesper Dangaard Brouer <hawk@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: "Luis R. Rodriguez" <mcgrof@winlab.rutgers.edu>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: bpf@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200814113933.1903438-21-lee.jones@linaro.org
Lee Jones [Fri, 14 Aug 2020 11:39:16 +0000 (12:39 +0100)]
wil6210: Demote non-kerneldoc headers to standard comment blocks
No effort has been made to document any of the function parameters here.
Fixes the following W=1 kernel build warning(s):
drivers/net/wireless/ath/wil6210/cfg80211.c:1749: warning: Function parameter or member 'ies' not described in '_wil_cfg80211_find_ie'
drivers/net/wireless/ath/wil6210/cfg80211.c:1749: warning: Function parameter or member 'ies_len' not described in '_wil_cfg80211_find_ie'
drivers/net/wireless/ath/wil6210/cfg80211.c:1749: warning: Function parameter or member 'ie' not described in '_wil_cfg80211_find_ie'
drivers/net/wireless/ath/wil6210/cfg80211.c:1749: warning: Function parameter or member 'ie_len' not described in '_wil_cfg80211_find_ie'
drivers/net/wireless/ath/wil6210/cfg80211.c:1780: warning: Function parameter or member 'ies1' not described in '_wil_cfg80211_merge_extra_ies'
drivers/net/wireless/ath/wil6210/cfg80211.c:1780: warning: Function parameter or member 'ies1_len' not described in '_wil_cfg80211_merge_extra_ies'
drivers/net/wireless/ath/wil6210/cfg80211.c:1780: warning: Function parameter or member 'ies2' not described in '_wil_cfg80211_merge_extra_ies'
drivers/net/wireless/ath/wil6210/cfg80211.c:1780: warning: Function parameter or member 'ies2_len' not described in '_wil_cfg80211_merge_extra_ies'
drivers/net/wireless/ath/wil6210/cfg80211.c:1780: warning: Function parameter or member 'merged_ies' not described in '_wil_cfg80211_merge_extra_ies'
drivers/net/wireless/ath/wil6210/cfg80211.c:1780: warning: Function parameter or member 'merged_len' not described in '_wil_cfg80211_merge_extra_ies'
Cc: Maya Erez <merez@codeaurora.org>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: wil6210@qti.qualcomm.com
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200814113933.1903438-14-lee.jones@linaro.org
Lee Jones [Fri, 14 Aug 2020 11:39:12 +0000 (12:39 +0100)]
ath5k: pcu: Add a description for 'band' remove one for 'mode'
Fixes the following W=1 kernel build warning(s):
drivers/net/wireless/ath/ath5k/pcu.c:115: warning: Function parameter or member 'band' not described in 'ath5k_hw_get_frame_duration'
drivers/net/wireless/ath/ath5k/pcu.c:955: warning: Excess function parameter 'mode' description in 'ath5k_hw_pcu_init'
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Nick Kossifidis <mickflemm@gmail.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Reyk Floeter <reyk@openbsd.org>
Cc: "W. S. Bell" <mentor@madwifi.org>
Cc: Luis Rodriguez <mcgrof@winlab.rutgers.edu>
Cc: Pavel Roskin <proski@gnu.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200814113933.1903438-10-lee.jones@linaro.org
Gustavo A. R. Silva [Mon, 27 Jul 2020 19:49:30 +0000 (14:49 -0500)]
ath5k: Use fallthrough pseudo-keyword
Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1].
[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200727194930.GA1491@embeddedor
Kalle Valo [Fri, 14 Aug 2020 07:10:30 +0000 (10:10 +0300)]
ath11k: hal: create hw_srng_config dynamically
On QCA6390 reg_start and reg_size values are different from IPQ8074 so we need
to change the values runtime. As we can't modify a static const variable
hw_srng_config directly, instead use it as a template, copy it and modify the
copy with correct values.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1597389030-13887-12-git-send-email-kvalo@codeaurora.org
Carl Huang [Fri, 14 Aug 2020 07:10:29 +0000 (10:10 +0300)]
ath11k: enable internal sleep clock
On x86 and other non-qcom platforms, host needs to explicitly tell the firmware
to use the internal sleep clock. Some QCA6390 modules have OTP burnt with
external sleep clock selected, and these modules can't work expectedly unless
firmware selects internal sleep clock.
Add a field to hw_params to support this difference.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1597389030-13887-11-git-send-email-kvalo@codeaurora.org
Carl Huang [Fri, 14 Aug 2020 07:10:28 +0000 (10:10 +0300)]
ath11k: fix KASAN warning of ath11k_qmi_wlanfw_wlan_cfg_send
It's caused by reading memory out of boundary from target_ce_config_wlan.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1597389030-13887-10-git-send-email-kvalo@codeaurora.org
Carl Huang [Fri, 14 Aug 2020 07:10:27 +0000 (10:10 +0300)]
ath11k: fix memory OOB access in qmi_decode
The decoded_size is wrongly assigned in ath11k_qmi_msg_handlers and it results
in out of boundary access in qmi_decode. The correct decoded_size should be
calculated from the related ind_msg structure.
This issue is exposed with QCA6390 because it needs 11 small memory chunks
which are stored in qmi_wlanfw_request_mem_ind_msg_v01 and hence the
decoded_size exceeds the wrongly assigend decoded_size.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1597389030-13887-9-git-send-email-kvalo@codeaurora.org
Carl Huang [Fri, 14 Aug 2020 07:10:26 +0000 (10:10 +0300)]
ath11k: allocate smaller chunks of memory for firmware
On x86 it's sometimes difficult to allocate a large contigous DMA
memory, so instead allocate blocks of small chunk memory.
In ath11k_qmi_msg_mem_request_cb() the error handling was cleaned up to avoid
an unused variable warning. Also changed the test from (ret < 0) to just (ret)
as the functions don't return any positive values.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1597389030-13887-8-git-send-email-kvalo@codeaurora.org
Govind Singh [Fri, 14 Aug 2020 07:10:25 +0000 (10:10 +0300)]
ath11k: setup ce tasklet for control path
CE srng is used for control path and CE srng processing is done using tasklet
bottom half. Setup ce tasklet initialization and scheduling for control path.
Needed for PCI support.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2
Signed-off-by: Govind Singh <govinds@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1597389030-13887-7-git-send-email-kvalo@codeaurora.org
Govind Singh [Fri, 14 Aug 2020 07:10:24 +0000 (10:10 +0300)]
ath11k: configure copy engine msi address in CE srng
Fill msi base address and msi data to be programmed in CE srang.
This is used by the srng to generate the msi interrupt.
Needed for PCI support.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2
Signed-off-by: Govind Singh <govinds@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1597389030-13887-6-git-send-email-kvalo@codeaurora.org
Govind Singh [Fri, 14 Aug 2020 07:10:23 +0000 (10:10 +0300)]
ath11k: pci: add read32() and write32() hif operations
Add support for bus read/write/window selection operations
for reading hardware memory.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2
Signed-off-by: Govind Singh <govinds@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1597389030-13887-5-git-send-email-kvalo@codeaurora.org
Govind Singh [Fri, 14 Aug 2020 07:10:22 +0000 (10:10 +0300)]
ath11k: fill appropriate QMI service instance id for QCA6390
QMI service instance id is used for qmi service lookup, IPQ8074 and QCA6390
uses different instance id for service lookup. Fill appropriate QMI service
instance id for respective targets.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2
Signed-off-by: Govind Singh <govinds@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1597389030-13887-4-git-send-email-kvalo@codeaurora.org
Govind Singh [Fri, 14 Aug 2020 07:10:21 +0000 (10:10 +0300)]
ath11k: add board file support for PCI devices
PCI devices like QCA6390 load the board file differently, add support for that
and the method is chosen using bus_params variables.
Add support to create board name for different targets. This board name is
used to parse the board data from board-2.bin for ahb/pci based targets.
As struct target_mem_chunk::vaddr was changed from 'u32' to 'u32 *' in
ath11k_qmi_assign_target_mem_chunk() vaddr assignments were changed to NULL to
avoid a compilation warning. IPQ8074 does not use the vaddr field for anything
so that change does not affect functionality.
At the moment this only supports board files with BIN type. Support for ELF
type, which seems to be more popular on QCA6390 devices, needs to be added later.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2
Signed-off-by: Govind Singh <govinds@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1597389030-13887-3-git-send-email-kvalo@codeaurora.org
Govind Singh [Fri, 14 Aug 2020 07:10:20 +0000 (10:10 +0300)]
ath11k: add support for m3 firmware
PCI devices like QCA6390 have a separate firmware image for the m3
micro-controller. Add support to load the firmware using m3.bin file.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2
Signed-off-by: Govind Singh <govinds@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1597389030-13887-2-git-send-email-kvalo@codeaurora.org
Govind Singh [Thu, 13 Aug 2020 09:04:26 +0000 (12:04 +0300)]
ath11k: use remoteproc only with AHB devices
QCA6390 and other PCI devices use MHI based firmware loading and do not use
remoteproc, so enable it only for AHB devices.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2
Signed-off-by: Govind Singh <govinds@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1597309466-19688-11-git-send-email-kvalo@codeaurora.org
Govind Singh [Thu, 13 Aug 2020 09:04:25 +0000 (12:04 +0300)]
ath11k: pci: add HAL, CE and core initialisation
Define CE pipe/qmi config and setup pci irq for the
same. Call ath11k_core_init().
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2
Signed-off-by: Govind Singh <govinds@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1597309466-19688-10-git-send-email-kvalo@codeaurora.org
Govind Singh [Thu, 13 Aug 2020 09:04:24 +0000 (12:04 +0300)]
ath11k: register MHI controller device for QCA6390
Modem Host Interface (MHI) is a communication protocol to communicate with
external Qualcomm modems and Wi-Fi chipsets over high speed peripheral buses.
Even though MHI doesn’t dictate underlying physical layer, protocol and MHI
stack is structured for PCI based devices.
Register directly with MHI subsystem as a MHI device driver for firmware
download to QCA6390.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2
Signed-off-by: Govind Singh <govinds@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1597309466-19688-9-git-send-email-kvalo@codeaurora.org
Kalle Valo [Thu, 13 Aug 2020 09:04:23 +0000 (12:04 +0300)]
ath11k: implement ath11k_core_pre_init()
This is needed to initialise hw_params before MHI registration starts. MHI
needs location of firmware directory and that's delivered via hw_params.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1597309466-19688-8-git-send-email-kvalo@codeaurora.org
Govind Singh [Thu, 13 Aug 2020 09:04:22 +0000 (12:04 +0300)]
ath11k: pci: add MSI config initialisation
QCA6390 uses PCI MSI for CE/MHI/DP interrupt. Add MSI vector mapping and MSI
enable/disable operations.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2
Signed-off-by: Govind Singh <govinds@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1597309466-19688-7-git-send-email-kvalo@codeaurora.org
Govind Singh [Thu, 13 Aug 2020 09:04:21 +0000 (12:04 +0300)]
ath11k: pci: setup resources
Add support for setting up pci region and dma mask.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2
Signed-off-by: Govind Singh <govinds@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1597309466-19688-6-git-send-email-kvalo@codeaurora.org
Govind Singh [Thu, 13 Aug 2020 09:04:20 +0000 (12:04 +0300)]
ath11k: add simple PCI client driver for QCA6390 chipset
QCA6390 is a PCI based 11ax chipset, split AHB into own kernel module
ath11k_ahb.ko and add ath11k_pci.ko for PCI devices.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2
Signed-off-by: Govind Singh <govinds@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1597309466-19688-5-git-send-email-kvalo@codeaurora.org
Kalle Valo [Thu, 13 Aug 2020 09:04:19 +0000 (12:04 +0300)]
ath11k: move ring mask definitions to hw_params
This is needed for splitting ahb and pci modules as they have different ring
mask settings.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1597309466-19688-4-git-send-email-kvalo@codeaurora.org
Carl Huang [Thu, 13 Aug 2020 09:04:18 +0000 (12:04 +0300)]
ath11k: add hw_params entry for QCA6390
Define own firmware directory and settings for QCA6390.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1597309466-19688-3-git-send-email-kvalo@codeaurora.org
Carl Huang [Thu, 13 Aug 2020 09:04:17 +0000 (12:04 +0300)]
ath11k: do not depend on ARCH_QCOM for ath11k
With only IPQ8074 supported ath11k was only usable on Qualcomm architectures.
But now that we are adding QCA6390 PCI support to ath11k that's not the case
anymore and it can be used on any architecture supporting PCI. So remove the
dependency on ARCH_QCOM. After that there is also no need to depend on
COMPILE_TEST.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1597309466-19688-2-git-send-email-kvalo@codeaurora.org
Linus Torvalds [Sun, 16 Aug 2020 20:04:57 +0000 (13:04 -0700)]
Linux 5.9-rc1
Linus Torvalds [Sun, 16 Aug 2020 17:55:12 +0000 (10:55 -0700)]
Merge tag 'io_uring-5.9-2020-08-15' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"A few differerent things in here.
Seems like syzbot got some more io_uring bits wired up, and we got a
handful of reports and the associated fixes are in here.
General fixes too, and a lot of them marked for stable.
Lastly, a bit of fallout from the async buffered reads, where we now
more easily trigger short reads. Some applications don't really like
that, so the io_read() code now handles short reads internally, and
got a cleanup along the way so that it's now easier to read (and
documented). We're now passing tests that failed before"
* tag 'io_uring-5.9-2020-08-15' of git://git.kernel.dk/linux-block:
io_uring: short circuit -EAGAIN for blocking read attempt
io_uring: sanitize double poll handling
io_uring: internally retry short reads
io_uring: retain iov_iter state over io_read/io_write calls
task_work: only grab task signal lock when needed
io_uring: enable lookup of links holding inflight files
io_uring: fail poll arm on queue proc failure
io_uring: hold 'ctx' reference around task_work queue + execute
fs: RWF_NOWAIT should imply IOCB_NOIO
io_uring: defer file table grabbing request cleanup for locked requests
io_uring: add missing REQ_F_COMP_LOCKED for nested requests
io_uring: fix recursive completion locking on oveflow flush
io_uring: use TWA_SIGNAL for task_work uncondtionally
io_uring: account locked memory before potential error case
io_uring: set ctx sq/cq entry count earlier
io_uring: Fix NULL pointer dereference in loop_rw_iter()
io_uring: add comments on how the async buffered read retry works
io_uring: io_async_buf_func() need not test page bit
Mike Rapoport [Sun, 16 Aug 2020 14:24:03 +0000 (17:24 +0300)]
parisc: fix PMD pages allocation by restoring pmd_alloc_one()
Commit
1355c31eeb7e ("asm-generic: pgalloc: provide generic pmd_alloc_one()
and pmd_free_one()") converted parisc to use generic version of
pmd_alloc_one() but it missed the fact that parisc uses order-1 pages for
PMD.
Restore the original version of pmd_alloc_one() for parisc, just use
GFP_PGTABLE_KERNEL that implies __GFP_ZERO instead of GFP_KERNEL and
memset.
Fixes:
1355c31eeb7e ("asm-generic: pgalloc: provide generic pmd_alloc_one() and pmd_free_one()")
Reported-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Tested-by: Meelis Roos <mroos@linux.ee>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lkml.kernel.org/r/9f2b5ebd-e4a4-0fa1-6cd3-4b9f6892d1ad@linux.ee
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 16 Aug 2020 03:36:42 +0000 (20:36 -0700)]
Merge tag 'block-5.9-2020-08-14' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A few fixes on the block side of things:
- Discard granularity fix (Coly)
- rnbd cleanups (Guoqing)
- md error handling fix (Dan)
- md sysfs fix (Junxiao)
- Fix flush request accounting, which caused an IO slowdown for some
configurations (Ming)
- Properly propagate loop flag for partition scanning (Lennart)"
* tag 'block-5.9-2020-08-14' of git://git.kernel.dk/linux-block:
block: fix double account of flush request's driver tag
loop: unset GENHD_FL_NO_PART_SCAN on LOOP_CONFIGURE
rnbd: no need to set bi_end_io in rnbd_bio_map_kern
rnbd: remove rnbd_dev_submit_io
md-cluster: Fix potential error pointer dereference in resize_bitmaps()
block: check queue's limits.discard_granularity in __blkdev_issue_discard()
md: get sysfs entry after redundancy attr group create
Linus Torvalds [Sun, 16 Aug 2020 01:54:42 +0000 (18:54 -0700)]
Merge tag 'riscv-for-linus-5.9-mw1' of git://git./linux/kernel/git/riscv/linux
Pull RISC-V fix from Palmer Dabbelt:
"I collected a single fix during the merge window: we managed to break
the early trap setup on !MMU, this fixes it"
* tag 'riscv-for-linus-5.9-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Setup exception vector for nommu platform
Linus Torvalds [Sun, 16 Aug 2020 01:50:32 +0000 (18:50 -0700)]
Merge tag 'sh-for-5.9' of git://git.libc.org/linux-sh
Pull arch/sh updates from Rich Felker:
"Cleanup, SECCOMP_FILTER support, message printing fixes, and other
changes to arch/sh"
* tag 'sh-for-5.9' of git://git.libc.org/linux-sh: (34 commits)
sh: landisk: Add missing initialization of sh_io_port_base
sh: bring syscall_set_return_value in line with other architectures
sh: Add SECCOMP_FILTER
sh: Rearrange blocks in entry-common.S
sh: switch to copy_thread_tls()
sh: use the generic dma coherent remap allocator
sh: don't allow non-coherent DMA for NOMMU
dma-mapping: consolidate the NO_DMA definition in kernel/dma/Kconfig
sh: unexport register_trapped_io and match_trapped_io_handler
sh: don't include <asm/io_trapped.h> in <asm/io.h>
sh: move the ioremap implementation out of line
sh: move ioremap_fixed details out of <asm/io.h>
sh: remove __KERNEL__ ifdefs from non-UAPI headers
sh: sort the selects for SUPERH alphabetically
sh: remove -Werror from Makefiles
sh: Replace HTTP links with HTTPS ones
arch/sh/configs: remove obsolete CONFIG_SOC_CAMERA*
sh: stacktrace: Remove stacktrace_ops.stack()
sh: machvec: Modernize printing of kernel messages
sh: pci: Modernize printing of kernel messages
...
Jens Axboe [Sat, 15 Aug 2020 22:58:42 +0000 (15:58 -0700)]
io_uring: short circuit -EAGAIN for blocking read attempt
One case was missed in the short IO retry handling, and that's hitting
-EAGAIN on a blocking attempt read (eg from io-wq context). This is a
problem on sockets that are marked as non-blocking when created, they
don't carry any REQ_F_NOWAIT information to help us terminate them
instead of perpetually retrying.
Fixes:
227c0c9673d8 ("io_uring: internally retry short reads")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Sat, 15 Aug 2020 18:44:50 +0000 (11:44 -0700)]
io_uring: sanitize double poll handling
There's a bit of confusion on the matching pairs of poll vs double poll,
depending on if the request is a pure poll (IORING_OP_POLL_ADD) or
poll driven retry.
Add io_poll_get_double() that returns the double poll waitqueue, if any,
and io_poll_get_single() that returns the original poll waitqueue. With
that, remove the argument to io_poll_remove_double().
Finally ensure that wait->private is cleared once the double poll handler
has run, so that remove knows it's already been seen.
Cc: stable@vger.kernel.org # v5.8
Reported-by: syzbot+7f617d4a9369028b8a2c@syzkaller.appspotmail.com
Fixes:
18bceab101ad ("io_uring: allow POLL_ADD with double poll_wait() users")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Sat, 15 Aug 2020 18:17:15 +0000 (11:17 -0700)]
Merge tag 'perf-tools-2020-08-14' of git://git./linux/kernel/git/acme/linux
Pull more perf tools updates from Arnaldo Carvalho de Melo:
"Fixes:
- Fixes for 'perf bench numa'.
- Always memset source before memcpy in 'perf bench mem'.
- Quote CC and CXX for their arguments to fix build in environments
using those variables to pass more than just the compiler names.
- Fix module symbol processing, addressing regression detected via
"perf test".
- Allow multiple probes in record+script_probe_vfs_getname.sh 'perf
test' entry.
Improvements:
- Add script to autogenerate socket family name id->string table from
copy of kernel header, used so far in 'perf trace'.
- 'perf ftrace' improvements to provide similar options for this
utility so that one can go from 'perf record', 'perf trace', etc to
'perf ftrace' just by changing the name of the subcommand.
- Prefer new "sched:sched_waking" trace event when it exists in 'perf
sched' post processing.
- Update POWER9 metrics to utilize other metrics.
- Fall back to querying debuginfod if debuginfo not found locally.
Miscellaneous:
- Sync various kvm headers with kernel sources"
* tag 'perf-tools-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (40 commits)
perf ftrace: Make option description initials all capital letters
perf build-ids: Fall back to debuginfod query if debuginfo not found
perf bench numa: Remove dead code in parse_nodes_opt()
perf stat: Update POWER9 metrics to utilize other metrics
perf ftrace: Add change log
perf: ftrace: Add set_tracing_options() to set all trace options
perf ftrace: Add option --tid to filter by thread id
perf ftrace: Add option -D/--delay to delay tracing
perf: ftrace: Allow set graph depth by '--graph-opts'
perf ftrace: Add support for trace option tracing_thresh
perf ftrace: Add option 'verbose' to show more info for graph tracer
perf ftrace: Add support for tracing option 'irq-info'
perf ftrace: Add support for trace option funcgraph-irqs
perf ftrace: Add support for trace option sleep-time
perf ftrace: Add support for tracing option 'func_stack_trace'
perf tools: Add general function to parse sublevel options
perf ftrace: Add option '--inherit' to trace children processes
perf ftrace: Show trace column header
perf ftrace: Add option '-m/--buffer-size' to set per-cpu buffer size
perf ftrace: Factor out function write_tracing_file_int()
...
Linus Torvalds [Sat, 15 Aug 2020 17:38:03 +0000 (10:38 -0700)]
Merge tag 'x86-urgent-2020-08-15' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Misc fixes and small updates all around the place:
- Fix mitigation state sysfs output
- Fix an FPU xstate/sxave code assumption bug triggered by
Architectural LBR support
- Fix Lightning Mountain SoC TSC frequency enumeration bug
- Fix kexec debug output
- Fix kexec memory range assumption bug
- Fix a boundary condition in the crash kernel code
- Optimize porgatory.ro generation a bit
- Enable ACRN guests to use X2APIC mode
- Reduce a __text_poke() IRQs-off critical section for the benefit of
PREEMPT_RT"
* tag 'x86-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/alternatives: Acquire pte lock with interrupts enabled
x86/bugs/multihit: Fix mitigation reporting when VMX is not in use
x86/fpu/xstate: Fix an xstate size check warning with architectural LBRs
x86/purgatory: Don't generate debug info for purgatory.ro
x86/tsr: Fix tsc frequency enumeration bug on Lightning Mountain SoC
kexec_file: Correctly output debugging information for the PT_LOAD ELF header
kexec: Improve & fix crash_exclude_mem_range() to handle overlapping ranges
x86/crash: Correct the address boundary of function parameters
x86/acrn: Remove redundant chars from ACRN signature
x86/acrn: Allow ACRN guest to use X2APIC mode
Linus Torvalds [Sat, 15 Aug 2020 17:36:40 +0000 (10:36 -0700)]
Merge tag 'sched-urgent-2020-08-15' of git://git./linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Two fixes: fix a new tracepoint's output value, and fix the formatting
of show-state syslog printouts"
* tag 'sched-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/debug: Fix the alignment of the show-state debug output
sched: Fix use of count for nr_running tracepoint
Linus Torvalds [Sat, 15 Aug 2020 17:34:24 +0000 (10:34 -0700)]
Merge tag 'perf-urgent-2020-08-15' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Misc fixes, an expansion of perf syscall access to CAP_PERFMON
privileged tools, plus a RAPL HW-enablement for Intel SPR platforms"
* tag 'perf-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/rapl: Add support for Intel SPR platform
perf/x86/rapl: Support multiple RAPL unit quirks
perf/x86/rapl: Fix missing psys sysfs attributes
hw_breakpoint: Remove unused __register_perf_hw_breakpoint() declaration
kprobes: Remove show_registers() function prototype
perf/core: Take over CAP_SYS_PTRACE creds to CAP_PERFMON capability
Linus Torvalds [Sat, 15 Aug 2020 17:32:18 +0000 (10:32 -0700)]
Merge tag 'locking-urgent-2020-08-15' of git://git./linux/kernel/git/tip/tip
Pull locking fixlets from Ingo Molnar:
"A documentation fix and a 'fallthrough' macro update"
* tag 'locking-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Convert to use the preferred 'fallthrough' macro
Documentation/locking/locktypes: Fix a typo
Linus Torvalds [Sat, 15 Aug 2020 15:34:36 +0000 (08:34 -0700)]
Merge tag '9p-for-5.9-rc1' of git://github.com/martinetd/linux
Pull 9p updates from Dominique Martinet:
- some code cleanup
- a couple of static analysis fixes
- setattr: try to pick a fid associated with the file rather than the
dentry, which might sometimes matter
* tag '9p-for-5.9-rc1' of git://github.com/martinetd/linux:
9p: Remove unneeded cast from memory allocation
9p: remove unused code in 9p
net/9p: Fix sparse endian warning in trans_fd.c
9p: Fix memory leak in v9fs_mount
9p: retrieve fid from file when file instance exist.
Linus Torvalds [Sat, 15 Aug 2020 15:31:39 +0000 (08:31 -0700)]
Merge tag '5.9-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Three small cifs/smb3 fixes, one for stable fixing mkdir path with
the 'idsfromsid' mount option"
* tag '5.9-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
SMB3: Fix mkdir when idsfromsid configured on mount
cifs: Convert to use the fallthrough macro
cifs: Fix an error pointer dereference in cifs_mount()
Linus Torvalds [Sat, 15 Aug 2020 15:26:55 +0000 (08:26 -0700)]
Merge tag 'nfs-for-5.9-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Stable fixes:
- pNFS: Don't return layout segments that are being used for I/O
- pNFS: Don't move layout segments off the active list when being used for I/O
Features:
- NFS: Add support for user xattrs through the NFSv4.2 protocol
- NFS: Allow applications to speed up readdir+statx() using AT_STATX_DONT_SYNC
- NFSv4.0 allow nconnect for v4.0
Bugfixes and cleanups:
- nfs: ensure correct writeback errors are returned on close()
- nfs: nfs_file_write() should check for writeback errors
- nfs: Fix getxattr kernel panic and memory overflow
- NFS: Fix the pNFS/flexfiles mirrored read failover code
- SUNRPC: dont update timeout value on connection reset
- freezer: Add unsafe versions of freezable_schedule_timeout_interruptible for NFS
- sunrpc: destroy rpc_inode_cachep after unregister_filesystem"
* tag 'nfs-for-5.9-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (32 commits)
NFS: Fix flexfiles read failover
fs: nfs: delete repeated words in comments
rpc_pipefs: convert comma to semicolon
nfs: Fix getxattr kernel panic and memory overflow
NFS: Don't return layout segments that are in use
NFS: Don't move layouts to plh_return_segs list while in use
NFS: Add layout segment info to pnfs read/write/commit tracepoints
NFS: Add tracepoints for layouterror and layoutstats.
NFS: Report the stateid + status in trace_nfs4_layoutreturn_on_close()
SUNRPC dont update timeout value on connection reset
nfs: nfs_file_write() should check for writeback errors
nfs: ensure correct writeback errors are returned on close()
NFSv4.2: xattr cache: get rid of cache discard work queue
NFS: remove redundant initialization of variable result
NFSv4.0 allow nconnect for v4.0
freezer: Add unsafe versions of freezable_schedule_timeout_interruptible for NFS
sunrpc: destroy rpc_inode_cachep after unregister_filesystem
NFSv4.2: add client side xattr caching.
NFSv4.2: hook in the user extended attribute handlers
NFSv4.2: add the extended attribute proc functions.
...
Linus Torvalds [Sat, 15 Aug 2020 15:25:41 +0000 (08:25 -0700)]
Merge tag 'edac_updates_for_5.9_pt2' of git://git./linux/kernel/git/ras/ras
Pull edac fix from Tony Luck:
"Fix for the ie31200 driver that missed the first pull"
* tag 'edac_updates_for_5.9_pt2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/ie31200: Fallback if host bridge device is already initialized
Linus Torvalds [Sat, 15 Aug 2020 15:19:58 +0000 (08:19 -0700)]
Merge tag 'devicetree-fixes-for-5.9' of git://git./linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
"Another round of 'allOf' removals and whitespace clean-ups of schemas"
* tag 'devicetree-fixes-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: Remove more cases of 'allOf' containing a '$ref'
dt-bindings: Whitespace clean-ups in schema files
Linus Torvalds [Sat, 15 Aug 2020 15:18:22 +0000 (08:18 -0700)]
Merge tag 'acpi-5.9-rc1-2' of git://git./linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"Add new hardware support to the ACPI driver for AMD SoCs, the x86 clk
driver and the Designware i2c driver (changes from Akshu Agrawal and
Pu Wen)"
* tag 'acpi-5.9-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
clk: x86: Support RV architecture
ACPI: APD: Add a fmw property is_raven
clk: x86: Change name from ST to FCH
ACPI: APD: Change name from ST to FCH
i2c: designware: Add device HID for Hygon I2C controller
Linus Torvalds [Sat, 15 Aug 2020 15:17:01 +0000 (08:17 -0700)]
Merge tag 'pm-5.9-rc1-3' of git://git./linux/kernel/git/rafael/linux-pm
Pull one more power management update from Rafael Wysocki:
"Modify the intel_pstate driver to allow it to work in the passive mode
with hardware-managed P-states (HWP) enabled"
* tag 'pm-5.9-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Implement passive mode with HWP enabled
Linus Torvalds [Sat, 15 Aug 2020 15:09:38 +0000 (08:09 -0700)]
Merge tag 'mfd-next-5.9-1' of git://git./linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Core Frameworks
- Make better attempt at matching device with the correct OF node
- Allow batch removal of hierarchical sub-devices
New Drivers
- Add STM32 Clocksource driver
- Add support for Khadas System Control Microcontroller
Driver Removal
- Remove unused driver for TI's SMSC
ECE1099
New Device Support
- Add support for Intel Emmitsburg PCH to Intel LPSS PCI
- Add support for Intel Tiger Lake PCH-H to Intel LPSS PCI
- Add support for Dialog DA revision to Dialog DA9063
New Functionality
- Add support for AXP803 to be probed by I2C
Fix-ups
- Numerous W=1 warning fixes
- Device Tree changes (stm32-lptimer, gateworks-gsc, khadas,mcu, stmfx, cros-ec, j721e-system-controller)
- Enabled Regmap 'fast I/O' in stm32-lptimer
- Change BUG_ON to WARN_ON in arizona-core
- Remove superfluous code/initialisation (madera, max14577)
- Trivial formatting/spelling issues (madera-core, madera-i2c, da9055, max77693-private)
- Switch to of_platform_populate() in sprd-sc27xx-spi
- Expand out set/get brightness/pwm macros in lm3533-ctrlbank
- Disable IRQs on suspend in motorola-cpcap
- Clean-up error handling in intel_soc_pmic_mrfld
- Ensure correct removal order of sub-devices in madera
- Many s/HTTP/HTTPS/ link changes
- Ensure name used with Regmap is unique in syscon
Bug Fixes
- Properly 'put' clock on unbind and error in arizona-core
- Fix revision handling in da9063
- Fix 'assignment of read-only location' error in kempld-core
- Avoid using the Regmap API when atomic in rn5t618
- Redefine volatile register description in rn5t618
- Use locking to protect event handler in dln2"
* tag 'mfd-next-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (76 commits)
mfd: syscon: Use a unique name with regmap_config
mfd: Replace HTTP links with HTTPS ones
mfd: dln2: Run event handler loop under spinlock
mfd: madera: Improve handling of regulator unbinding
mfd: mfd-core: Add mechanism for removal of a subset of children
mfd: intel_soc_pmic_mrfld: Simplify the return expression of intel_scu_ipc_dev_iowrite8()
mfd: max14577: Remove redundant initialization of variable current_bits
mfd: rn5t618: Fix caching of battery related registers
mfd: max77693-private: Drop a duplicated word
mfd: da9055: pdata.h: Drop a duplicated word
mfd: rn5t618: Make restart handler atomic safe
mfd: kempld-core: Fix 'assignment of read-only location' error
mfd: axp20x: Allow the AXP803 to be probed by I2C
mfd: da9063: Add support for latest DA silicon revision
mfd: da9063: Fix revision handling to correctly select reg tables
dt-bindings: mfd: st,stmfx: Remove I2C unit name
dt-bindings: mfd: ti,j721e-system-controller.yaml: Add J721e system controller
mfd: motorola-cpcap: Disable interrupt for suspend
mfd: smsc-
ece1099: Remove driver
mfd: core: Add OF_MFD_CELL_REG() helper
...
Linus Torvalds [Sat, 15 Aug 2020 15:02:03 +0000 (08:02 -0700)]
Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton:
"Subsystems affected by this patch series: mm/hotfixes, lz4, exec,
mailmap, mm/thp, autofs, sysctl, mm/kmemleak, mm/misc and lib"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (35 commits)
virtio: pci: constify ioreadX() iomem argument (as in generic implementation)
ntb: intel: constify ioreadX() iomem argument (as in generic implementation)
rtl818x: constify ioreadX() iomem argument (as in generic implementation)
iomap: constify ioreadX() iomem argument (as in generic implementation)
sh: use generic strncpy()
sh: clkfwk: remove r8/r16/r32
include/asm-generic/vmlinux.lds.h: align ro_after_init
mm: annotate a data race in page_zonenum()
mm/swap.c: annotate data races for lru_rotate_pvecs
mm/rmap: annotate a data race at tlb_flush_batched
mm/mempool: fix a data race in mempool_free()
mm/list_lru: fix a data race in list_lru_count_one
mm/memcontrol: fix a data race in scan count
mm/page_counter: fix various data races at memsw
mm/swapfile: fix and annotate various data races
mm/filemap.c: fix a data race in filemap_fault()
mm/swap_state: mark various intentional data races
mm/page_io: mark various intentional data races
mm/frontswap: mark various intentional data races
mm/kmemleak: silence KCSAN splats in checksum
...
Wen Gong [Fri, 14 Aug 2020 08:04:54 +0000 (16:04 +0800)]
ath10k: correct the array index from mcs index for HT mode for QCA6174
The mcs index of HT mode is 0 to 31, please refer http://mcsindex.com/.
Its spatial stream(Nss) number is from 1 to 4, mcs index is 0~7 for
Nss=1, 8~15 for Nss=2, 16~23 for Nss=3 and 24~31 is for Nss=4.
The mcs is reported from firmware in wmi_tlv_peer_stats_info of
event WMI_TLV_PEER_STATS_INFO_EVENTID, its range is from 0~15 for
QCA6174 SDIO and PCIe. It is for both Nss=1 and Nss=2, and it has 2
rate table supported_ht_mcs_rate_nss1 and supported_ht_mcs_rate_nss2
in ath10k, they are for Nss=1 and Nss=2, each table has 8 rates.
It need to find the matched row number with the mcs index, for example,
mcs index is 2, it is <=7, so it is Nss=1, and match row 2 in table of
Nss=1. If mcs index is 12, it is >= 8 and <= 15, so it is Nss=2, it
match row 4(12-8) in table of Nss=2. If mcs index is >=16, it is for
Nss=3/4, it need to add rate table, so it is not support in current
ath10k.
This patch is to find the row number in rate table of Nss=1 or Nss=2
with the mcs index reported from firmware.
This patch only effect the chips which supports_peer_stats_info of its
hw_params is true, it is true only for QCA6174 currently.
Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00048
Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00110-QCARMSWP-1
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1597392294-13124-1-git-send-email-wgong@codeaurora.org
Wen Gong [Fri, 14 Aug 2020 15:55:51 +0000 (18:55 +0300)]
ath10k: enable supports_peer_stats_info for QCA6174 PCI devices
When using QCA6174 PCI devices working in station mode, after connected
to AP, tx bitrate is always '1.0 MBit/s' in output of command 'iw wlan0
station dump'. (QCA6174 SDIO devices are working fine.)
After this patch, it show correct bitrate:
Station c4:04:15:5d:97:22 (on wls1)
inactive time: 312 ms
rx bytes: 31496
rx packets: 173
tx bytes: 8625
tx packets: 46
tx retries: 0
tx failed: 0
signal: -76 [-88, -80] dBm
signal avg: -75 [-82, -77] dBm
tx bitrate: 39.0 MBit/s MCS 4
rx bitrate: 26.0 MBit/s MCS 3
Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00110-QCARMSWP-1
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1597312029-32348-4-git-send-email-wgong@codeaurora.org
projects / linux-2.6-microblaze.git / log