dt-bindings: pinctrl: at91: add sam9x7

Add device tree binding for SAM9X7 pin controller.

Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240223172531.671993-1-varshini.rajendran@microchip.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: ocelot: remove redundant assignment to variable ret

The variable ret is being assigned a value that is never read, it
is being re-assigned a value in every case statement in the following
switch statement. The assignment is redundant and can be removed.

Cleans up clang scan build warning:
drivers/pinctrl/pinctrl-ocelot.c:1404:3: warning: Value stored to 'ret'
is never read [deadcode.DeadStores]

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20240223162850.3914349-1-colin.i.king@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: pinctrl: mobileye,eyeq5-pinctrl: add bindings

Add dt-schema type bindings for the Mobileye EyeQ5 pin controller.

Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240227-mbly-clk-v8-1-c57fbda7664a@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Merge tag 'renesas-pinctrl-for-v6.9-tag2' of git://git./linux/kernel/git/geert/renesas-drivers into devel

pinctrl: renesas: Updates for v6.9 (take two)

  - Add support for the R-Car V4M (R8A779H0) SoC,
  - Add support for suspend/resume on the RZ/G2L family,
  - Miscellaneous fixes and improvements.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: qcom: sm8650-lpass-lpi: correct Kconfig name

Use proper model name in SM8650 LPASS pin controller Kconfig entry.

Cc: <stable@vger.kernel.org>
Fixes: c4e47673853f ("pinctrl: qcom: sm8650-lpass-lpi: add SM8650 LPASS")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240216102435.89867-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: renesas: Allow the compiler to optimize away sh_pfc_pm

The conversion to DEFINE_NOIRQ_DEV_PM_OPS() lost the ability of the
compiler to optimize away the struct dev_pm_ops object when it is not
needed.

Fix this by replacing the use of pm_sleep_ptr() by a custom wrapper.

Fixes: 727eb02eb753375e ("pinctrl: renesas: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/6238a78e32fa21f0c795406b6cba7bce7af92577.1708513940.git.geert+renesas@glider.be

pinctrl: renesas: rzg2l: Add suspend/resume support

pinctrl-rzg2l driver is used on RZ/G3S which support deep sleep states
where power to most of the SoC components is turned off.

For this add suspend/resume support. This involves saving and restoring
configured registers along with disabling clock in case there is no pin
configured as wakeup sources.

To save/restore registers 2 caches were allocated: one for GPIO pins and
one for dedicated pins.

On suspend path the pin controller registers are saved and if none of the
pins are configured as wakeup sources the pinctrl clock is disabled.
Otherwise it remains on.

On resume path the configuration is done as follows:
1/ setup PFCs by writing to registers on pin based accesses
2/ setup GPIOs by writing to registers on port based accesses and
   following configuration steps specified in hardware manual
3/ setup dedicated pins by writing to registers on port based accesses
4/ setup interrupts.

Because interrupt signals are routed to IA55 interrupt controller and
IA55 interrupt controller resumes before pin controller, patch restores
also the configured interrupts just after pin settings are restored to
avoid invalid interrupts while resuming.

Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240215124112.2259103-3-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

pinctrl: renesas: rzg2l: Select GPIOLIB_IRQCHIP and IRQ_DOMAIN_HIERARCHY

The pinctrl-rzg2l driver accesses gpio_chip.irq, which is available only
if CONFIG_GPIOLIB_IRQCHIP=y, and uses APIs that are defined only if
CONFIG_IRQ_DOMAIN_HIERARCHY=y (irq_chip_*_parent() APIs).

On ARCH_RZG2L, CONFIG_IRQ_DOMAIN_HIERARCHY is selected anyway, e.g. by
CONFIG_ARM_GIC_V3, but CONFIG_GPIOLIB_IRQCHIP is not (it is on R-Car).
Make this explicit at the driver level for a clearer view of the
dependencies.

Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240215124112.2259103-2-claudiu.beznea.uj@bp.renesas.com
[geert: select GPIOLIB_IRQCHIP, too]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

pinctrl: renesas: rzg2l: Avoid configuring ISEL in gpio_irq_{en,dis}able*(

Currently on irq_disable(), we are disabling gpio interrupt enable(ISEL).
That means the pin is just gpio input and not gpio input interrupt any
more.  So, move configuring ISEL in rzg2l_gpio_child_to_parent_hwirq()/
rzg2l_gpio_irq_domain_free() so that the pin will be gpioint always even
during irq_disable().

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240206135318.165426-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

pinctrl: renesas: rzg2l: Simplify rzg2l_gpio_irq_{en,dis}able()

Simplify rzg2l_gpio_irq_{en,dis}able() by adding a helper function
rzg2l_gpio_irq_endisable().

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240206135115.151218-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

pinctrl: renesas: rzg2l: Configure interrupt input mode

Configure GPIO interrupt as input mode. Also if the bootloader sets
gpio interrupt pin as function, override it as gpio.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240206135115.151218-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

pinctrl: renesas: r8a779h0: Add Audio pins, groups, functions

Add pins, groups and functions for Audio on the Renesas R-Car V4M
(R8A779H0) SoC.

Signed-off-by: Cong Dang <cong.dang.xn@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/e7d5024c23929d2eccb02bb5daf44c914db07d80.1706264667.git.geert+renesas@glider.be

pinctrl: renesas: r8a779h0: Add PCIe pins, groups, functions

Add pins, groups and functions for the PCIe Controller on the Renesas
R-Car V4M (R8A779H0) SoC.

Signed-off-by: Cong Dang <cong.dang.xn@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/d32909f5197fa2df0ca6bd6e5fda7cae8863101e.1706264667.git.geert+renesas@glider.be

pinctrl: renesas: r8a779h0: Add CANFD pins, groups, functions

Add pins, groups and functions for the CAN-FD interfaces on the Renesas
R-Car V4M (R8A779H0) SoC.

Signed-off-by: Cong Dang <cong.dang.xn@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/fd380a402ec4c6238aa8cafc2e602d9e0f1c8cf2.1706264667.git.geert+renesas@glider.be

pinctrl: renesas: r8a779h0: Add PWM/TPU pins, groups, functions

Add pins, groups and functions for the PWM and 16-Bit Timer Pulse Units
(TPU) on the Renesas R-Car V4M (R8A779H0) SoC.

Signed-off-by: Cong Dang <cong.dang.xn@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/ddbd37b1815169a8b18c5026bc4fd957f0b25dde.1706264667.git.geert+renesas@glider.be

pinctrl: renesas: r8a779h0: Add MSIOF pins, groups, functions

Add pins, groups and functions for the Clock-Synchronized Serial
Interfaces with FIFO (MSIOF) on the Renesas R-Car V4M (R8A779H0) SoC.

Signed-off-by: Cong Dang <cong.dang.xn@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/cbfc61f0c02e9dbeec0ea689e10bdd5ebf5bf1e3.1706264667.git.geert+renesas@glider.be

pinctrl: renesas: r8a779h0: Add I2C pins, groups, functions

Add pins, groups and functions for the I2C Bus Interfaces on the Renesas
R-Car V4M (R8A779H0) SoC.

Signed-off-by: Cong Dang <cong.dang.xn@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/23fc01c6e97e544abd23168439f5d45d3ac8fa5b.1706264667.git.geert+renesas@glider.be

pinctrl: renesas: r8a779h0: Add HSCIF pins, groups, functions

Add pins, groups and functions for the High Speed Serial Communication
Interfaces with FIFO (HSCIF) on the Renesas R-Car V4M (R8A779H0) SoC.

Signed-off-by: Cong Dang <cong.dang.xn@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/27577af0042928e4b673a2774c68a14c4ea7c157.1706264667.git.geert+renesas@glider.be

pinctrl: renesas: r8a779h0: Add SCIF_CLK pins, groups, functions

Add pins, groups and functions for the baud rate generation clock pins
(SCIF_CLK) on the Renesas R-Car V4M (R8A779H0) SoC.

Signed-off-by: Cong Dang <cong.dang.xn@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/ee056d78d3a339bdbcca2cc5281f1fe01bbc3953.1706264667.git.geert+renesas@glider.be

pinctrl: renesas: r8a779h0: Add SCIF pins, groups, functions

Add pins, groups and functions for the Serial Communication Interfaces
with FIFO (SCIF) on the Renesas R-Car V4M (R8A779H0) SoC.

Signed-off-by: Cong Dang <cong.dang.xn@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/4ad8127a54fb36044ae85db07ff30be05fa5d0f0.1706264667.git.geert+renesas@glider.be

pinctrl: renesas: r8a779h0: Add QSPI pins, groups, functions

Add pins, groups and functions for the QSPI functionality proviced by
the SPI Multi I/O Bus Controller (RPC-IF) on the Renesas R-Car V4M
(R8A779H0) SoC.

Signed-off-by: Cong Dang <cong.dang.xn@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/ebe123bca4888382bc76ccf1a3a9e85ced31f3f3.1706264667.git.geert+renesas@glider.be

pinctrl: renesas: r8a779h0: Add SD/MMC pins, groups, functions

Add pins, groups and functions for the SD Card/MMC Interface on the
Renesas R-Car V4M (R8A779H0) SoC.

Signed-off-by: Cong Dang <cong.dang.xn@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/c4c06f5be8ffeb32c48993c138f89c8f463751f4.1706264667.git.geert+renesas@glider.be

pinctrl: renesas: r8a779h0: Add Ethernet AVB pins, groups, functions

Add pins, groups and functions for Ethernet AVB on the Renesas R-Car V4M
(R8A779H0) SoC.

Signed-off-by: Cong Dang <cong.dang.xn@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/f79d8f75582f44a7441faed550fb37e44a917558.1706264667.git.geert+renesas@glider.be

pinctrl: renesas: Initial R8A779H0 (R-Car V4M) PFC support

Add initial pin control support for the R-Car V4M (R8A779H0) SoC,
including bias, drive strength and voltage control.

Signed-off-by: Cong Dang <cong.dang.xn@renesas.com>
[geert: Fixes and cleanups]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/5f59263e75be713dc954007cfeb2c99274c9d761.1706264667.git.geert+renesas@glider.be

dt-bindings: pinctrl: renesas,pfc: Document R-Car V4M support

Document support for the Pin Function Controller (PFC) in the Renesas
R-Car V4M (R8A779H0) SoC.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/56685dc04af3cee7cb3751e855ed5b3679b14122.1706264667.git.geert+renesas@glider.be

Merge tag 'renesas-pinctrl-for-v6.9-tag1' of git://git./linux/kernel/git/geert/renesas-drivers into devel

pinctrl: renesas: Updates for v6.9

  - Add pin groups for SCIF_CLK2 on R-Car V4H,
  - Add support for port pins P19 to P28 on RZ/Five,
  - Miscellaneous fixes and improvements.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: mcp23s08: Check only GPIOs which have interrupts enabled

GPINTEN register contains information about GPIOs with enabled
interrupts no need to check other GPIOs for changes.

Signed-off-by: Arturas Moskvinas <arturas.moskvinas@gmail.com>
Link: https://lore.kernel.org/r/20240201141406.32484-2-arturas.moskvinas@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: pinctrl: cy8c95x0: Update gpio-reserved-ranges

Update maxItems to 60 for gpio-reserved-ranges to allow multiple gpio
reserved ranges.
Add input-enable property to allow configuring a pin as input.
Also update example.

Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240206112501.715042-1-naresh.solanki@9elements.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: pinctrl: nvidia,tegra234-pinmux: Restructure common schema

The structure of the NVIDIA Tegra234 common pinmux schema doesn't work
for restricting properties because a child node schema can't be extended
with additional properties from another schema defining the same child
node. The 2 child node schemas are evaluated independently as the
schemas are not recursively combined in any way.

As the common schema is almost all the child node schema anyways, just
remove the parent node from the common schema. Then add 'reg' and adjust
the $ref's in the users of the common schema.

Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240202223454.1667383-1-robh@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: mediatek: Drop bogus slew rate register range for MT8192

The MT8192 does not support configuring pin slew rate. This is evident
from both the datasheet, and the fact that the driver points the slew
rate register range at the GPIO direction register range.

Drop the bogus setting.

Fixes: d32f38f2a8fc ("pinctrl: mediatek: Add pinctrl driver for mt8192")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240131071910.3950450-2-wenst@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: mediatek: Drop bogus slew rate register range for MT8186

The MT8186 does not support configuring pin slew rate. This is evident
from both the datasheet, and the fact that the driver points the slew
rate register range at the GPIO direction register range.

Drop the bogus setting.

Fixes: 8b483bda1e46 ("pinctrl: add pinctrl driver on mt8186")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240131071910.3950450-1-wenst@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: nuvoton: Constify wpcm450_groups

There is no modifications are assumed for wpcm450_groups. Constify it.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231211154239.4190429-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: renesas: pinctrl-rzg2l: Add the missing port pins P19 to P28

Add the missing port pins P19 to P28 for RZ/Five SoC. These additional
pins provide expanded capabilities and are exclusive to the RZ/Five SoC.

Couple of port pins have different configuration and are not identical for
the complete port so introduce struct rzg2l_variable_pin_cfg to handle
such cases and introduce the PIN_CFG_VARIABLE macro. The actual pin config
is then assigned in rzg2l_pinctrl_get_variable_pin_cfg().

Add an additional check in rzg2l_gpio_get_gpioint() to only allow GPIO pins
which support interrupt facility.

While at define RZG2L_GPIO_PORT_PACK() using RZG2L_GPIO_PORT_SPARSE_PACK().

Update the gpio-ranges property in the RZ/Five SoC DTSI, as it must
match the driver.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240129135556.63466-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Link: https://lore.kernel.org/r/20240129135556.63466-5-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

pinctrl: renesas: rzg2l: Include pinmap in RZG2L_GPIO_PORT_PACK() macro

Currently we assume all the port pins are sequential ie always PX_0 to
PX_n (n=1..7) exist, but on RZ/Five SoC we have additional pins P19_1 to
P28_5 which have holes in them, for example only one pin on port19 is
available and that is P19_1 and not P19_0. So to handle such cases
include pinmap for each port which would indicate the pin availability
on each port. As the pincount can be calculated based on pinmap drop this
from RZG2L_GPIO_PORT_PACK() macro.

Previously we had a max of 7 pins on each port but on RZ/Five Port-20
has 8 pins, so move the single pin configuration to BIT(63).

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240129135556.63466-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

pinctrl: renesas: rzg2l: Improve code for readability

As the RZ/G2L pinctrl driver is extensively utilized by numerous SoCs and
has experienced substantial growth, enhance code readability by
incorporating FIELD_PREP_CONST/FIELD_GET macros wherever necessary.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240129135556.63466-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

pinctrl: renesas: checker: Limit cfg reg enum checks to provided IDs

If the number of provided enum IDs in a variable width config register
description does not match the expected number, the checker uses the
expected number for validating the individual enum IDs.

However, this may cause out-of-bounds accesses on the array holding the
enum IDs, leading to bogus enum_id conflict warnings.  Worse, if the bug
is an incorrect bit field description (e.g. accidentally using "12"
instead of "-12" for a reserved field), thousands of warnings may be
printed, overflowing the kernel log buffer.

Fix this by limiting the enum ID check to the number of provided enum
IDs.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/c7385f44f2faebb8856bcbb4e908d846fc1531fb.1705930809.git.geert+renesas@glider.be

pinctrl: renesas: r8a779g0: Add missing SCIF_CLK2 pin group/function

R-Car V4H actually has two SCIF_CLK pins.
The second pin provides the SCIF_CLK signal for HSCIF2 and SCIF4.

Fixes: 050442ae4c74f830 ("pinctrl: renesas: r8a779g0: Add pins, groups and functions")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/6352ec9b63fdd38c2c70d8d203e46f21fbfeccdc.1705589612.git.geert+renesas@glider.be

pinctrl: renesas: rzg2l: Fix locking in rzg2l_dt_subnode_to_map()

Commit d3aaa7203a17 ("pinctrl: renesas: rzg2l: Add pin configuration
support for pinmux groups") introduced the possibility to parse pin
configuration for pinmux groups. It did that by calling
rzg2l_map_add_config() at the end of rzg2l_dt_subnode_to_map() and
jumping to the remove_group label in case rzg2l_map_add_config() failed.
But if that happens, the mutex will already be unlocked, thus this it will
lead to double mutex unlock operation. To fix this move the
rzg2l_map_add_config() call just after all the name argument is ready and
before the mutex is locked. There is no harm in doing this, as this only
parses the data from device tree that will be further processed by
pinctrl core code.

Fixes: d3aaa7203a17 ("pinctrl: renesas: rzg2l: Add pin configuration support for pinmux groups")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/f8c3a3a0-7c48-4e40-8af0-ed4e9d9b049f@moroto.mountain
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240115153453.99226-1-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

dt-bindings: pinctr: pinctrl-zynq: Fix compatible string

Compatible string doesn't really match with compatible string listed in the
driver itself. While binding was converted from txt to yaml
xlnx,zynq-pinctrl was listed as compatible string but example was using
xlnx,pinctrl-zynq and also this string is used in all DTSes.
xlnx,zynq-pinctrl is used only in dt binding and not present in any DT
which is stable for quite a long time that's why use old compatible string
and update binding document instead of starting to use unused compatible
string.

Fixes: 153df45acda0 ("dt-bindings: pinctrl: pinctrl-zynq: Convert to yaml")
Signed-off-by: Michal Simek <michal.simek@amd.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/c1307a4dd5e30290acacc786cb2170deb9eaa539.1706087258.git.michal.simek@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: cs42l43: Use str_high_low()

Use str_high_low() rather than open coding.

Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240129153138.3221604-3-ckeepax@opensource.cirrus.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: cs42l43: Remove some needless inlines

Remove some pointless inline declarations, no reason not to let the
compiler decide.

Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240129153138.3221604-2-ckeepax@opensource.cirrus.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: cs42l43: Tidy up header includes

Fixup a couple of incorrect header includes.

Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240129153138.3221604-1-ckeepax@opensource.cirrus.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: pinctrl: nuvoton,npcm845: Drop redundant type for "slew-rate"

pincfg-node.yaml already defines the type for "slew-rate", so drop the
type from the nuvoton,npcm845-pinctrl binding.

Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240124190106.1540585-2-robh@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: pinctrl: Unify "input-debounce" schema

nuvoton,npcm845-pinctrl defines the common "input-debounce" property as
an array rather than an scalar. Update the common definition to expand
it to an uint32-array, and update all the users of the property with
array constraints.

Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240124190106.1540585-1-robh@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: pinctrl: amlogic: narrow regex for unit address to hex numbers

Regular expression used to match the unit address part should not allow
non-hex numbers.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240123083511.21063-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: pinctrl-zynqmp: Use devm_kcalloc() instead of devm_kzalloc()

As noted in the "Deprecated Interfaces, Language Features, Attributes,
and Conventions" documentation [1], size calculations (especially
multiplication) should not be performed in memory allocator (or similar)
function arguments due to the risk of them overflowing. This could lead
to values wrapping around and a smaller allocation being made than the
caller was expecting. Using those allocations could lead to linear
overflows of heap memory and other misbehaviors.

So, use the purpose specific devm_kcalloc() function instead of the
argument size * count in the devm_kzalloc() function.

Link: https://www.kernel.org/doc/html/next/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments
Link: https://github.com/KSPP/linux/issues/162
Signed-off-by: Erick Archer <erick.archer@gmx.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20240119181909.7079-1-erick.archer@gmx.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: mediatek: mt7981: add additional emmc groups

Add new emmc groups in the pinctrl driver for the
MediaTek MT7981 SoC:
* emmc reset, with pin 15.
* emmc 4-bit bus-width, with pins 16 to 19, and 24 to 25.
* emmc 8-bit bus-width, with pins 16 to 25.

The existing emmc_45 group is kept for legacy reasons, even
if this is the union of emmc_reset and emmc_8 groups.

Signed-off-by: Jean Thomas <jean.thomas@wifirst.fr>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/20240117145547.3354242-1-jean.thomas@wifirst.fr
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: mediatek: mt7981: add additional uart group

Add uart1_3 (pins 26, 27) group to the pinctrl driver for the
MediaTek MT7981 SoC.

Signed-off-by: Jean Thomas <jean.thomas@wifirst.fr>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/20240117124234.3137050-1-jean.thomas@wifirst.fr
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: mt7986: excise kernel-doc warnings

Fix kernel-doc warnings for enum (anonymous): the enum values are not
documented, so don't indicate that the comment contains kernel-doc
notation.

pinctrl-mt7986.c:68: warning: Enum value 'GPIO_BASE' not described in enum '(anonymous)'
pinctrl-mt7986.c:68: warning: Enum value 'IOCFG_RT_BASE' not described in enum '(anonymous)'
pinctrl-mt7986.c:68: warning: Enum value 'IOCFG_RB_BASE' not described in enum '(anonymous)'
pinctrl-mt7986.c:68: warning: Enum value 'IOCFG_LT_BASE' not described in enum '(anonymous)'
pinctrl-mt7986.c:68: warning: Enum value 'IOCFG_LB_BASE' not described in enum '(anonymous)'
pinctrl-mt7986.c:68: warning: Enum value 'IOCFG_TR_BASE' not described in enum '(anonymous)'
pinctrl-mt7986.c:68: warning: Enum value 'IOCFG_TL_BASE' not described in enum '(anonymous)'

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312110210.x3vxq42A-lkp@intel.com/
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: <linux-gpio@vger.kernel.org>
Cc: Sean Wang <sean.wang@kernel.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: <linux-mediatek@lists.infradead.org>
Cc: <linux-arm-kernel@lists.infradead.org>
Link: https://lore.kernel.org/r/20240111045126.13768-1-rdunlap@infradead.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: st: Return pinctrl_gpio_direction_output to transfer the error

Return pinctrl_gpio_direction_output() in order to transfer the error
if it fails.

Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240103085058.3771653-1-nichen@iscas.ac.cn
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Linux 6.8-rc1

Merge tag 'bcachefs-2024-01-21' of https://evilpiepirate.org/git/bcachefs

Pull more bcachefs updates from Kent Overstreet:
 "Some fixes, Some refactoring, some minor features:

   - Assorted prep work for disk space accounting rewrite

   - BTREE_TRIGGER_ATOMIC: after combining our trigger callbacks, this
     makes our trigger context more explicit

   - A few fixes to avoid excessive transaction restarts on
     multithreaded workloads: fstests (in addition to ktest tests) are
     now checking slowpath counters, and that's shaking out a few bugs

   - Assorted tracepoint improvements

   - Starting to break up bcachefs_format.h and move on disk types so
     they're with the code they belong to; this will make room to start
     documenting the on disk format better.

   - A few minor fixes"

* tag 'bcachefs-2024-01-21' of https://evilpiepirate.org/git/bcachefs: (46 commits)
  bcachefs: Improve inode_to_text()
  bcachefs: logged_ops_format.h
  bcachefs: reflink_format.h
  bcachefs; extents_format.h
  bcachefs: ec_format.h
  bcachefs: subvolume_format.h
  bcachefs: snapshot_format.h
  bcachefs: alloc_background_format.h
  bcachefs: xattr_format.h
  bcachefs: dirent_format.h
  bcachefs: inode_format.h
  bcachefs; quota_format.h
  bcachefs: sb-counters_format.h
  bcachefs: counters.c -> sb-counters.c
  bcachefs: comment bch_subvolume
  bcachefs: bch_snapshot::btime
  bcachefs: add missing __GFP_NOWARN
  bcachefs: opts->compression can now also be applied in the background
  bcachefs: Prep work for variable size btree node buffers
  bcachefs: grab s_umount only if snapshotting
  ...

Merge tag 'timers-core-2024-01-21' of git://git./linux/kernel/git/tip/tip

Pull timer updates from Thomas Gleixner:
 "Updates for time and clocksources:

   - A fix for the idle and iowait time accounting vs CPU hotplug.

     The time is reset on CPU hotplug which makes the accumulated
     systemwide time jump backwards.

   - Assorted fixes and improvements for clocksource/event drivers"

* tag 'timers-core-2024-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tick-sched: Fix idle and iowait sleeptime accounting vs CPU hotplug
  clocksource/drivers/ep93xx: Fix error handling during probe
  clocksource/drivers/cadence-ttc: Fix some kernel-doc warnings
  clocksource/drivers/timer-ti-dm: Fix make W=n kerneldoc warnings
  clocksource/timer-riscv: Add riscv_clock_shutdown callback
  dt-bindings: timer: Add StarFive JH8100 clint
  dt-bindings: timer: thead,c900-aclint-mtimer: separate mtime and mtimecmp regs

Merge tag 'powerpc-6.8-2' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Aneesh Kumar:

 - Increase default stack size to 32KB for Book3S

Thanks to Michael Ellerman.

* tag 'powerpc-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s: Increase default stack size to 32KB

bcachefs: Improve inode_to_text()

Add line breaks - inode_to_text() is now much easier to read.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: logged_ops_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: reflink_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs; extents_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: ec_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: subvolume_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: snapshot_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: alloc_background_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: xattr_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: dirent_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: inode_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs; quota_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: sb-counters_format.h

bcachefs_format.h has gotten too big; let's do some organizing.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: counters.c -> sb-counters.c

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: comment bch_subvolume

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: bch_snapshot::btime

Add a field to bch_snapshot for creation time; this will be important
when we start exposing the snapshot tree to userspace.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: add missing __GFP_NOWARN

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: opts->compression can now also be applied in the background

The "apply this compression method in the background" paths now use the
compression option if background_compression is not set; this means that
setting or changing the compression option will cause existing data to
be compressed accordingly in the background.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Prep work for variable size btree node buffers

bcachefs btree nodes are big - typically 256k - and btree roots are
pinned in memory. As we're now up to 18 btrees, we now have significant
memory overhead in mostly empty btree roots.

And in the future we're going to start enforcing that certain btree node
boundaries exist, to solve lock contention issues - analagous to XFS's
AGIs.

Thus, we need to start allocating smaller btree node buffers when we
can. This patch changes code that refers to the filesystem constant
c->opts.btree_node_size to refer to the btree node buffer size -
btree_buf_bytes() - where appropriate.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: grab s_umount only if snapshotting

When I was testing mongodb over bcachefs with compression,
there is a lockdep warning when snapshotting mongodb data volume.

$ cat test.sh
prog=bcachefs

$prog subvolume create /mnt/data
$prog subvolume create /mnt/data/snapshots

while true;do
    $prog subvolume snapshot /mnt/data /mnt/data/snapshots/$(date +%s)
    sleep 1s
done

$ cat /etc/mongodb.conf
systemLog:
  destination: file
  logAppend: true
  path: /mnt/data/mongod.log

storage:
  dbPath: /mnt/data/

lockdep reports:
[ 3437.452330] ======================================================
[ 3437.452750] WARNING: possible circular locking dependency detected
[ 3437.453168] 6.7.0-rc7-custom+ #85 Tainted: G            E
[ 3437.453562] ------------------------------------------------------
[ 3437.453981] bcachefs/35533 is trying to acquire lock:
[ 3437.454325] ffffa0a02b2b1418 (sb_writers#10){.+.+}-{0:0}, at: filename_create+0x62/0x190
[ 3437.454875]
               but task is already holding lock:
[ 3437.455268] ffffa0a02b2b10e0 (&type->s_umount_key#48){.+.+}-{3:3}, at: bch2_fs_file_ioctl+0x232/0xc90 [bcachefs]
[ 3437.456009]
               which lock already depends on the new lock.

[ 3437.456553]
               the existing dependency chain (in reverse order) is:
[ 3437.457054]
               -> #3 (&type->s_umount_key#48){.+.+}-{3:3}:
[ 3437.457507]        down_read+0x3e/0x170
[ 3437.457772]        bch2_fs_file_ioctl+0x232/0xc90 [bcachefs]
[ 3437.458206]        __x64_sys_ioctl+0x93/0xd0
[ 3437.458498]        do_syscall_64+0x42/0xf0
[ 3437.458779]        entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 3437.459155]
               -> #2 (&c->snapshot_create_lock){++++}-{3:3}:
[ 3437.459615]        down_read+0x3e/0x170
[ 3437.459878]        bch2_truncate+0x82/0x110 [bcachefs]
[ 3437.460276]        bchfs_truncate+0x254/0x3c0 [bcachefs]
[ 3437.460686]        notify_change+0x1f1/0x4a0
[ 3437.461283]        do_truncate+0x7f/0xd0
[ 3437.461555]        path_openat+0xa57/0xce0
[ 3437.461836]        do_filp_open+0xb4/0x160
[ 3437.462116]        do_sys_openat2+0x91/0xc0
[ 3437.462402]        __x64_sys_openat+0x53/0xa0
[ 3437.462701]        do_syscall_64+0x42/0xf0
[ 3437.462982]        entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 3437.463359]
               -> #1 (&sb->s_type->i_mutex_key#15){+.+.}-{3:3}:
[ 3437.463843]        down_write+0x3b/0xc0
[ 3437.464223]        bch2_write_iter+0x5b/0xcc0 [bcachefs]
[ 3437.464493]        vfs_write+0x21b/0x4c0
[ 3437.464653]        ksys_write+0x69/0xf0
[ 3437.464839]        do_syscall_64+0x42/0xf0
[ 3437.465009]        entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 3437.465231]
               -> #0 (sb_writers#10){.+.+}-{0:0}:
[ 3437.465471]        __lock_acquire+0x1455/0x21b0
[ 3437.465656]        lock_acquire+0xc6/0x2b0
[ 3437.465822]        mnt_want_write+0x46/0x1a0
[ 3437.465996]        filename_create+0x62/0x190
[ 3437.466175]        user_path_create+0x2d/0x50
[ 3437.466352]        bch2_fs_file_ioctl+0x2ec/0xc90 [bcachefs]
[ 3437.466617]        __x64_sys_ioctl+0x93/0xd0
[ 3437.466791]        do_syscall_64+0x42/0xf0
[ 3437.466957]        entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 3437.467180]
               other info that might help us debug this:

[ 3437.469670] 2 locks held by bcachefs/35533:
               other info that might help us debug this:

[ 3437.467507] Chain exists of:
                 sb_writers#10 --> &c->snapshot_create_lock --> &type->s_umount_key#48

[ 3437.467979]  Possible unsafe locking scenario:

[ 3437.468223]        CPU0                    CPU1
[ 3437.468405]        ----                    ----
[ 3437.468585]   rlock(&type->s_umount_key#48);
[ 3437.468758]                                lock(&c->snapshot_create_lock);
[ 3437.469030]                                lock(&type->s_umount_key#48);
[ 3437.469291]   rlock(sb_writers#10);
[ 3437.469434]
                *** DEADLOCK ***

[ 3437.469670] 2 locks held by bcachefs/35533:
[ 3437.469838]  #0: ffffa0a02ce00a88 (&c->snapshot_create_lock){++++}-{3:3}, at: bch2_fs_file_ioctl+0x1e3/0xc90 [bcachefs]
[ 3437.470294]  #1: ffffa0a02b2b10e0 (&type->s_umount_key#48){.+.+}-{3:3}, at: bch2_fs_file_ioctl+0x232/0xc90 [bcachefs]
[ 3437.470744]
               stack backtrace:
[ 3437.470922] CPU: 7 PID: 35533 Comm: bcachefs Kdump: loaded Tainted: G            E      6.7.0-rc7-custom+ #85
[ 3437.471313] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
[ 3437.471694] Call Trace:
[ 3437.471795]  <TASK>
[ 3437.471884]  dump_stack_lvl+0x57/0x90
[ 3437.472035]  check_noncircular+0x132/0x150
[ 3437.472202]  __lock_acquire+0x1455/0x21b0
[ 3437.472369]  lock_acquire+0xc6/0x2b0
[ 3437.472518]  ? filename_create+0x62/0x190
[ 3437.472683]  ? lock_is_held_type+0x97/0x110
[ 3437.472856]  mnt_want_write+0x46/0x1a0
[ 3437.473025]  ? filename_create+0x62/0x190
[ 3437.473204]  filename_create+0x62/0x190
[ 3437.473380]  user_path_create+0x2d/0x50
[ 3437.473555]  bch2_fs_file_ioctl+0x2ec/0xc90 [bcachefs]
[ 3437.473819]  ? lock_acquire+0xc6/0x2b0
[ 3437.474002]  ? __fget_files+0x2a/0x190
[ 3437.474195]  ? __fget_files+0xbc/0x190
[ 3437.474380]  ? lock_release+0xc5/0x270
[ 3437.474567]  ? __x64_sys_ioctl+0x93/0xd0
[ 3437.474764]  ? __pfx_bch2_fs_file_ioctl+0x10/0x10 [bcachefs]
[ 3437.475090]  __x64_sys_ioctl+0x93/0xd0
[ 3437.475277]  do_syscall_64+0x42/0xf0
[ 3437.475454]  entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 3437.475691] RIP: 0033:0x7f2743c313af
======================================================

In __bch2_ioctl_subvolume_create(), we grab s_umount unconditionally
and unlock it at the end of the function. There is a comment
"why do we need this lock?" about the lock coming from
commit 42d237320e98 ("bcachefs: Snapshot creation, deletion")
The reason is that __bch2_ioctl_subvolume_create() calls
sync_inodes_sb() which enforce locked s_umount to writeback all dirty
nodes before doing snapshot works.

Fix it by read locking s_umount for snapshotting only and unlocking
s_umount after sync_inodes_sb().

Signed-off-by: Su Yue <glass.su@suse.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: kvfree bch_fs::snapshots in bch2_fs_snapshots_exit

bch_fs::snapshots is allocated by kvzalloc in __snapshot_t_mut.
It should be freed by kvfree not kfree.
Or umount will triger:

[  406.829178 ] BUG: unable to handle page fault for address: ffffe7b487148008
[  406.830676 ] #PF: supervisor read access in kernel mode
[  406.831643 ] #PF: error_code(0x0000) - not-present page
[  406.832487 ] PGD 0 P4D 0
[  406.832898 ] Oops: 0000 [#1] PREEMPT SMP PTI
[  406.833512 ] CPU: 2 PID: 1754 Comm: umount Kdump: loaded Tainted: G           OE      6.7.0-rc7-custom+ #90
[  406.834746 ] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
[  406.835796 ] RIP: 0010:kfree+0x62/0x140
[  406.836197 ] Code: 80 48 01 d8 0f 82 e9 00 00 00 48 c7 c2 00 00 00 80 48 2b 15 78 9f 1f 01 48 01 d0 48 c1 e8 0c 48 c1 e0 06 48 03 05 56 9f 1f 01 <48> 8b 50 08 48 89 c7 f6 c2 01 0f 85 b0 00 00 00 66 90 48 8b 07 f6
[  406.837810 ] RSP: 0018:ffffb9d641607e48 EFLAGS: 00010286
[  406.838213 ] RAX: ffffe7b487148000 RBX: ffffb9d645200000 RCX: ffffb9d641607dc4
[  406.838738 ] RDX: 000065bb00000000 RSI: ffffffffc0d88b84 RDI: ffffb9d645200000
[  406.839217 ] RBP: ffff9a4625d00068 R08: 0000000000000001 R09: 0000000000000001
[  406.839650 ] R10: 0000000000000001 R11: 000000000000001f R12: ffff9a4625d4da80
[  406.840055 ] R13: ffff9a4625d00000 R14: ffffffffc0e2eb20 R15: 0000000000000000
[  406.840451 ] FS:  00007f0a264ffb80(0000) GS:ffff9a4e2d500000(0000) knlGS:0000000000000000
[  406.840851 ] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  406.841125 ] CR2: ffffe7b487148008 CR3: 000000018c4d2000 CR4: 00000000000006f0
[  406.841464 ] Call Trace:
[  406.841583 ]  <TASK>
[  406.841682 ]  ? __die+0x1f/0x70
[  406.841828 ]  ? page_fault_oops+0x159/0x470
[  406.842014 ]  ? fixup_exception+0x22/0x310
[  406.842198 ]  ? exc_page_fault+0x1ed/0x200
[  406.842382 ]  ? asm_exc_page_fault+0x22/0x30
[  406.842574 ]  ? bch2_fs_release+0x54/0x280 [bcachefs]
[  406.842842 ]  ? kfree+0x62/0x140
[  406.842988 ]  ? kfree+0x104/0x140
[  406.843138 ]  bch2_fs_release+0x54/0x280 [bcachefs]
[  406.843390 ]  kobject_put+0xb7/0x170
[  406.843552 ]  deactivate_locked_super+0x2f/0xa0
[  406.843756 ]  cleanup_mnt+0xba/0x150
[  406.843917 ]  task_work_run+0x59/0xa0
[  406.844083 ]  exit_to_user_mode_prepare+0x197/0x1a0
[  406.844302 ]  syscall_exit_to_user_mode+0x16/0x40
[  406.844510 ]  do_syscall_64+0x4e/0xf0
[  406.844675 ]  entry_SYSCALL_64_after_hwframe+0x6e/0x76
[  406.844907 ] RIP: 0033:0x7f0a2664e4fb

Signed-off-by: Su Yue <glass.su@suse.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: bios must be 512 byte algined

Fixes: 023f9ac9f70f bcachefs: Delete dio read alignment check
Reported-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: remove redundant variable tmp

The variable tmp is being assigned a value but it isn't being
read afterwards. The assignment is redundant and so tmp can be
removed.

Cleans up clang scan build warning:
warning: Although the value stored to 'ret' is used in the enclosing
expression, the value is never actually read from 'ret'
[deadcode.DeadStores]

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Improve trace_trans_restart_relock

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Fix excess transaction restarts in __bchfs_fallocate()

drop_locks_do() should not be used in a fastpath without first trying
the do in nonblocking mode - the unlock and relock will cause excessive
transaction restarts and potentially livelocking with other threads that
are contending for the same locks.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: extents_to_bp_state

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: bkey_and_val_eq()

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Better journal tracepoints

Factor out bch2_journal_bufs_to_text(), and use it in the
journal_entry_full() tracepoint; when we can't get a journal reservation
we need to know the outstanding journal entry sizes to know if the
problem is due to excessive flushing.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Print size of superblock with space allocated

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Avoid flushing the journal in the discard path

When issuing discards, we may need to flush the journal if there's too
many buckets that can't be discarded until a journal flush.

But the heuristic was bad; we should be comparing the number of buckets
that need to flushes against the number of free buckets, not the number
of buckets we saw.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Improve move_extent tracepoint

Also print out the data_opts, so that we can see what specifically is
being done to an extent.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Add missing bch2_moving_ctxt_flush_all()

This fixes a bug with rebalance IOs getting stuck with reads completed,
but writes never being issued.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Re-add move_extent_write tracepoint

It appears this was accidentally deleted at some point - also, do a bit
of cleanup.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: bch2_kthread_io_clock_wait() no longer sleeps until full amount

Drop t he loop in bch2_kthread_io_clock_wait(): this allows the code
that uses it to be woken up for other reasons, and fixes a bug where
rebalance wouldn't wake up when a scan was requested.

This raises the possibility of spurious wakeups, but callers should
always be able to handle that reasonably well.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Add .val_to_text() for KEY_TYPE_cookie

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Don't pass memcmp() as a pointer

Some (buggy!) compilers have issues with this.

Fixes: https://github.com/koverstreet/bcachefs/issues/625
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Merge tag 'header_cleanup-2024-01-20' of https://evilpiepirate.org/git/bcachefs

Pull header fix from Kent Overstreet:
 "Just one small fixup for the RT build"

* tag 'header_cleanup-2024-01-20' of https://evilpiepirate.org/git/bcachefs:
  spinlock: Fix failing build for PREEMPT_RT

bcachefs: Reduce would_deadlock restarts

We don't have to take locks in any particular ordering - we'll make
forward progress just fine - but if we try to stick to an ordering, it
can help to avoid excessive would_deadlock transaction restarts.

This tweaks the reflink path to take extents btree locks in the right
order.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: bch2_trans_account_disk_usage_change()

The disk space accounting rewrite is splitting out accounting for each
replicas set - those are moving to btree keys, instead of percpu
counters.

This breaks bch2_trans_fs_usage_apply() up, splitting out the part we
will still need.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: bch_fs_usage_base

Split out base filesystem usage into its own type; prep work for
breaking up bch2_trans_fs_usage_apply().

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: bch2_prt_compression_type()

bounds checking helper, since compression types are extensible

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: helpers for printing data types

We need bounds checking since new versions may introduce new data types.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: BTREE_TRIGGER_ATOMIC

Add a new flag to be explicit about when we're running atomic triggers.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: drop to_text code for obsolete bps in alloc keys

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: eytzinger_for_each() declares loop iter

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Don't log errors if BCH_WRITE_ALLOC_NOWAIT

Previously, we added logging in the write path to ensure that any
unexpected errors getting reported to userspace have a log message; but
BCH_WRITE_ALLOC_NOWAIT is a special case, it's used for promotes where
errors are expected and not reported out to userspace - so we need to
silence those.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>