USB: quirks: Ignore duplicate endpoint on Sound Devices MixPre-D

The Sound Devices MixPre-D audio card suffers from the same defect
as the Sound Devices USBPre2: an endpoint shared between a normal
audio interface and a vendor-specific interface, in violation of the
USB spec.  Since the USB core now treats duplicated endpoints as bugs
and ignores them, the audio endpoint isn't available and the card
can't be used for audio capture.

Along the same lines as commit bdd1b147b802 ("USB: quirks: blacklist
duplicate ep on Sound Devices USBPre2"), this patch adds a quirks
entry saying to ignore ep5in for interface 1, leaving it available for
use with standard audio interface 2.

Reported-and-tested-by: Jean-Christophe Barnoud <jcbarnoud@gmail.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: <stable@vger.kernel.org>
Fixes: 3e4f8e21c4f2 ("USB: core: fix check for duplicate endpoints")
Link: https://lore.kernel.org/r/20200826194624.GA412633@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dma-pool: Fix an uninitialized variable bug in atomic_pool_expand()

The "page" pointer can be used with out being initialized.

Fixes: d7e673ec2c8e ("dma-pool: Only allocate from CMA when in same memory zone")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

arm/xen: Add misuse warning to virt_to_gfn

As virt_to_gfn uses virt_to_phys, it will return invalid addresses when
used with vmalloc'd addresses. This patch introduces a warning, when
virt_to_gfn is used in this way.

Signed-off-by: Simon Leiner <simon@leiner.me>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/20200825093153.35500-2-simon@leiner.me
Signed-off-by: Juergen Gross <jgross@suse.com>

xen/xenbus: Fix granting of vmalloc'd memory

On some architectures (like ARM), virt_to_gfn cannot be used for
vmalloc'd memory because of its reliance on virt_to_phys. This patch
introduces a check for vmalloc'd addresses and obtains the PFN using
vmalloc_to_pfn in that case.

Signed-off-by: Simon Leiner <simon@leiner.me>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/20200825093153.35500-1-simon@leiner.me
Signed-off-by: Juergen Gross <jgross@suse.com>

XEN uses irqdesc::irq_data_common::handler_data to store a per interrupt
XEN data pointer which contains XEN specific information.

handler data is meant for interrupt handlers and not for storing irq chip
specific information as some devices require handler data to store internal
per interrupt information, e.g. pinctrl/GPIO chained interrupt handlers.

This obviously creates a conflict of interests and crashes the machine
because the XEN pointer is overwritten by the driver pointer.

As the XEN data is not handler specific it should be stored in
irqdesc::irq_data::chip_data instead.

A simple sed s/irq_[sg]et_handler_data/irq_[sg]et_chip_data/ cures that.

Cc: stable@vger.kernel.org
Reported-by: Roman Shaposhnik <roman@zededa.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Roman Shaposhnik <roman@zededa.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/87lfi2yckt.fsf@nanos.tec.linutronix.de
Signed-off-by: Juergen Gross <jgross@suse.com>

Merge tag 'amd-drm-fixes-5.9-2020-08-26' of git://people.freedesktop.org/~agd5f/linux into drm-fixes

amd-drm-fixes-5.9-2020-08-26:

amdgpu:
- Misc display fixes
- Backlight fixes
- MPO fix for DCN1
- Fixes for Sienna Cichlid
- Fixes for Navy Flounder
- Vega SW CTF fixes
- SMU fix for Raven
- Fix a possible overflow in INFO ioctl
- Gfx10 clockgating fix

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826200801.17735-1-alexander.deucher@amd.com

Merge tag 'drm-msm-fixes-2020-08-24' of https://gitlab.freedesktop.org/drm/msm into drm-fixes

Some fixes for v5.9 plus the one opp/bandwidth scaling patch ("drm:
msm: a6xx: use dev_pm_opp_set_bw to scale DDR") which was not included
in the initial pull due to dependency on patch landing thru OPP tree

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/

Merge branch 'etnaviv/fixes' of https://git.pengutronix.de/git/lst/linux into drm-fixes

Two fixes:
One fixes a bad interaction with the DRM scheduler, leading to some dma
fences not getting signalled after hitting the job timeout. The other
one fixes a GPU init regression, as apparently one old core doesn't
likes us reading some of the identification registers.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas Stach <l.stach@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/aceebfe3af636346f5252bdf727cdd988bdcbdf2.camel@pengutronix.de

Merge tag 'exynos-drm-fixes-v5.9-rc3' of git://git./linux/kernel/git/daeinki/drm-exynos into drm-fixes

One fixup
- Just drop __iommu annotation to fix sparse warning.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <daeinki@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826071520.3140-1-daeinki@gmail.com

io_uring: clear req->result on IOPOLL re-issue

Make sure we clear req->result, which was set to -EAGAIN for retry
purposes, when moving it to the reissue list. Otherwise we can end up
retrying a request more than once, which leads to weird results in
the io-wq handling (and other spots).

Cc: stable@vger.kernel.org
Reported-by: Andres Freund <andres@anarazel.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drm/amd/display: Fix memleak in amdgpu_dm_mode_config_init

When amdgpu_display_modeset_create_props() fails, state and
state->context should be freed to prevent memleak. It's the
same when amdgpu_dm_audio_init() fails.

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: disable runtime pm for navy_flounder

Disable runtime pm for navy_flounder temporarily.

Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Retry AUX write when fail occurs

[Why]
In dm_dp_aux_transfer() now, we forget to handle AUX_WR fail cases. We
suppose every write wil get done successfully and hence some AUX
commands might not sent out indeed.

[How]
Check if AUX_WR success. If not, retry it.

Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix buffer overflow in INFO ioctl

The values for "se_num" and "sh_num" come from the user in the ioctl.
They can be in the 0-255 range but if they're more than
AMDGPU_GFX_MAX_SE (4) or AMDGPU_GFX_MAX_SH_PER_SE (2) then it results in
an out of bounds read.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amd/powerplay: Fix hardmins not being sent to SMU for RV

[Why]
DC uses these to raise the voltage as needed for higher dispclk/dppclk
and to ensure that we have enough bandwidth to drive the displays.

There's a bug preventing these from actuially sending messages since
it's checking the actual clock (which is 0) instead of the incoming
clock (which shouldn't be 0) when deciding to send the hardmin.

[How]
Check the clocks != 0 instead of the actual clocks.

Fixes: 9ed9203c3ee7 ("drm/amd/powerplay: rv dal-pplib interface refactor powerplay part")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amdgpu: use MODE1 reset for navy_flounder by default

Switch default gpu reset method to MODE1 for navy_flounder.

Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: correct the thermal alert temperature limit settings

Do the maths in celsius degree. This can fix the issues caused
by the changes below:

drm/amd/pm: correct Vega20 swctf limit setting
drm/amd/pm: correct Vega12 swctf limit setting
drm/amd/pm: correct Vega10 swctf limit setting

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amdgpu: add asd fw check before loading asd

asd is not ready for some ASICs in early stage, and psp->asd_fw is more generic than ASIC name in the check.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Jiansong Chen <Jiansong.Chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Keep current gain when ABM disable immediately

[Why]
When system enters s3/s0i3, backlight PWM would set user level.

[How]
ABM disable function add keep current gain to avoid it.

Signed-off-by: Brandon Syu <Brandon.Syu@amd.com>
Reviewed-by: Josip Pavic <Josip.Pavic@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix passive dongle mistaken as active dongle in EDID emulation

[Why]
dongle_type is set during dongle connection but for passive dongles,
dongle_type is not set. If user starts with an active dongle and
then switches to a passive dongle, it will still report as an active
dongle. Trying to emulate the wrong connecter type results in display
not lighting up.

[How]
Set dpcd_caps.dongle_type for passive dongles in detect_dp().

Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Reviewed-by: Joshua Aberback <Joshua.Aberback@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Revert HDCP disable sequence change

[Why]
Revert HDCP disable sequence change that blanks stream before
disabling HDCP. PSP and HW teams are currently investigating the
root cause of why HDCP cannot be disabled before stream blank,
which is expected to work without issues.

Signed-off-by: Jaehyun Chung <jaehyun.chung@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Send DISPLAY_OFF after power down on boot

[WHY]
update_clocks might not be called on headless adapters. This means
DISPLAY_OFF may not be sent in headless cases.

[HOW]
If hardware is powered down on boot because it is headless (mode set
does not happen on that adapter) also send DISPLAY_OFF notification.

Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx10: refine mgcg setting

1. enable ENABLE_CGTS_LEGACY to fix specviewperf11 random hang.
2. remove obsolete RLC_CGTT_SCLK_OVERRIDE workaround.

Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amd/pm: correct Vega20 swctf limit setting

Correct the Vega20 thermal swctf limit.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amd/pm: correct Vega12 swctf limit setting

Correct the Vega12 thermal swctf limit.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amd/pm: correct Vega10 swctf limit setting

Correct the Vega10 thermal swctf limit.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1267

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amd/pm: set VCN pg per instances

When deciding whether to set pg for vcn1, instances
number is more generic than chip name.

Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: enable run_btc callback for sienna_cichlid

DC BTC support for sienna_cichlid is added, it provides
the DC tolerance and aging measurements.

Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drivers: gpu: amd: Initialize amdgpu_dm_backlight_caps object to 0 in amdgpu_dm_update_backlight_caps

In `amdgpu_dm_update_backlight_caps()`, there is a local
`amdgpu_dm_backlight_caps` object that is filled in by
`amdgpu_acpi_get_backlight_caps()`. However, this object is
uninitialized before the call and hence the subsequent check for
aux_support can fail since it is not initialized by
`amdgpu_acpi_get_backlight_caps()` as well. This change initializes
this local `amdgpu_dm_backlight_caps` object to 0.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Furquan Shaikh <furquan@google.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Reject overlay plane configurations in multi-display scenarios

[Why]
These aren't stable on some platform configurations when driving
multiple displays, especially on higher resolution.

In particular the delay in asserting p-state and validating from
x86 outweights any power or performance benefit from the hardware
composition.

Under some configurations this will manifest itself as extreme stutter
or unresponsiveness especially when combined with cursor movement.

[How]
Disable these for now. Exposing overlays to userspace doesn't guarantee
that they'll be able to use them in any and all configurations and it's
part of the DRM contract to have userspace gracefully handle validation
failures when they occur.

Valdiation occurs as part of DC and this in particular affects RV, so
disable this in dcn10_global_validation.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: use correct scale for actual_brightness

Documentation for sysfs backlight level interface requires that
values in both 'brightness' and 'actual_brightness' files are
interpreted to be in range from 0 to the value given in the
'max_brightness' file.

With amdgpu, max_brightness gives 255, and values written by the user
into 'brightness' are internally rescaled to a wider range. However,
reading from 'actual_brightness' gives the raw register value without
inverse rescaling. This causes issues for various userspace tools such
as PowerTop and systemd that expect the value to be in the correct
range.

Introduce a helper to retrieve internal backlight range. Use it to
reimplement 'convert_brightness' as 'convert_brightness_from_user' and
introduce 'convert_brightness_to_user'.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=203905
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1242
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alexander Monakov <amonakov@ispras.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amd/display: should check error using DC_OK

core_link_read_dpcd returns only DC_OK(1) and DC_ERROR_UNEXPECTED(-1),
the caller should check error using DC_OK instead of checking against 0

Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

iio: dpot-dac: fix code comment in dpot_dac_read_raw()

After the replacement of the /* fall through */ comment with the
fallthrough pseudo-keyword macro, the natural reading of a code
comment was broken.

Fix the natural reading of such a comment and make it intelligible.

Reported-by: Peter Rosin <peda@axentia.se>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>

Merge tag 'tty-5.9-rc3' of git://git./linux/kernel/git/gregkh/tty

Pull tty/serial fixes from Greg KH:
 "Here are a few small TTY/Serial/vt fixes for 5.9-rc3

  Included in here are:
   - qcom serial fixes
   - vt ioctl and core bugfixes
   - pl011 serial driver fixes
   - 8250 serial driver fixes
   - other misc serial driver fixes

  and for good measure:
   - fbcon fix for syzbot found problem.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: serial: imx: add dependence and build for earlycon
  serial: samsung: Removes the IRQ not found warning
  serial: 8250: change lock order in serial8250_do_startup()
  serial: stm32: avoid kernel warning on absence of optional IRQ
  serial: pl011: Fix oops on -EPROBE_DEFER
  serial: pl011: Don't leak amba_ports entry on driver register error
  serial: 8250_exar: Fix number of ports for Commtech PCIe cards
  tty: serial: qcom_geni_serial: Drop __init from qcom_geni_console_setup
  serial: qcom_geni_serial: Fix recent kdb hang
  vt_ioctl: change VT_RESIZEX ioctl to check for error return from vc_resize()
  fbcon: prevent user font height or width change from causing potential out-of-bounds access
  vt: defer kfree() of vc_screenbuf in vc_do_resize()

Merge tag 'char-misc-5.9-rc3' of git://git./linux/kernel/git/gregkh/char-misc

Pull char/misc driver fixes from Greg KH:
 "Here are some small char and misc and other driver subsystem fixes for
  5.9-rc3.

  The majority of these are tiny habanalabs driver fixes, but also in
  here are:

   - speakup build fixes now that it is out of staging and got exposed
     to more build systems all of a sudden

   - mei driver fix

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  habanalabs: correctly report inbound pci region cfg error
  habanalabs: check correct vmalloc return code
  habanalabs: validate FW file size
  habanalabs: fix incorrect check on failed workqueue create
  habanalabs: set max power according to card type
  habanalabs: proper handling of alloc size in coresight
  habanalabs: set clock gating according to mask
  habanalabs: verify user input in cs_ioctl_signal_wait
  habanalabs: Fix a loop in gaudi_extract_ecc_info()
  habanalabs: Fix memory corruption in debugfs
  habanalabs: validate packet id during CB parse
  habanalabs: Validate user address before mapping
  habanalabs: unmap PCI bars upon iATU failure
  mei: hdcp: fix mei_hdcp_verify_mprime() input parameter
  speakup: only build serialio when ISA is enabled
  speakup: Fix wait_for_xmitr for ttyio case

Merge tag 'hyperv-fixes-signed' of git://git./linux/kernel/git/hyperv/linux

Pull hyperv fixes from Wei Liu:
 "Two patches from Vineeth to improve Hyper-V timesync facility"

* tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  hv_utils: drain the timesync packets on onchannelcallback
  hv_utils: return error if host timesysnc update is stale

Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost

Pull virtio bugfixes from Michael Tsirkin:
 "A couple vdpa and vhost bugfixes"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  vdpa/mlx5: Avoid warnings about shifts on 32-bit platforms
  vhost-iotlb: fix vhost_iotlb_itree_next() documentation
  vdpa: ifcvf: free config irq in ifcvf_free_irq()
  vdpa: ifcvf: return err when fail to request config irq

io_uring: make offset == -1 consistent with preadv2/pwritev2

The man page for io_uring generally claims were consistent with what
preadv2 and pwritev2 accept, but turns out there's a slight discrepancy
in how offset == -1 is handled for pipes/streams. preadv doesn't allow
it, but preadv2 does. This currently causes io_uring to return -EINVAL
if that is attempted, but we should allow that as documented.

This change makes us consistent with preadv2/pwritev2 for just passing
in a NULL ppos for streams if the offset is -1.

Cc: stable@vger.kernel.org # v5.7+
Reported-by: Benedikt Ames <wisp3rwind@posteo.eu>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

MAINTAINERS: Add entry for HPE Superdome Flex (UV) maintainers

Add an entry and email addresses for people at HPE who are supporting
Linux on the Superdome Flex (a.k.a) UV platform.

 [ bp: Capitalize "linux" too :) ]

Signed-off-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200824221439.GA52810@swahl-home.5wahls.com

s390/vmem: fix vmem_add_range for 4-level paging

The kernel currently crashes if 4-level paging is used. Add missing
p4d_populate for just allocated pud entry.

Fixes: 3e0d3e408e63 ("s390/vmem: consolidate vmem_add_range() and vmem_remove_range()")
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

s390: don't trace preemption in percpu macros

Since commit a21ee6055c30 ("lockdep: Change hardirq{s_enabled,_context}
to per-cpu variables") the lockdep code itself uses percpu variables. This
leads to recursions because the percpu macros are calling preempt_enable()
which might call trace_preempt_on().

Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

loop: Set correct device size when using LOOP_CONFIGURE

The device size calculation was done before processing the loop
configuration, which meant that the we set the size on the underlying
block device incorrectly in case lo_offset/lo_sizelimit were set in the
configuration. Delay computing the size until we've setup the device
parameters correctly.

Fixes: 3448914e8cc5("loop: Add LOOP_CONFIGURE ioctl")
Reported-by: Lennart Poettering <mzxreary@0pointer.de>
Tested-by: Yang Xu <xuyang2018.jy@cn.fujitsu.com>
Signed-off-by: Martijn Coenen <maco@android.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

nbd: restore default timeout when setting it to zero

If we configured io timeout of nbd0 to 100s. Later after we
finished using it, we configured nbd0 again and set the io
timeout to 0. We expect it would timeout after 30 seconds
and keep retry. But in fact we could not change the timeout
when we set it to 0. the timeout is still the original 100s.

So change the timeout to default 30s when we set it to zero.
It also behaves same as commit 2da22da57348 ("nbd: fix zero
cmd timeout handling v2").

It becomes more important if we were reconfigure a nbd device
and the io timeout it set to zero. Because it could take 30s
to detect the new socket and thus io could be completed more
quickly compared to 100s.

Signed-off-by: Hou Pu <houpu@bytedance.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

vdpa/mlx5: Avoid warnings about shifts on 32-bit platforms

Clang warns several times when building for 32-bit ARM along the lines
of:

drivers/vdpa/mlx5/net/mlx5_vnet.c:1462:31: warning: shift count >= width
of type [-Wshift-count-overflow]
                ndev->mvdev.mlx_features |= BIT(VIRTIO_F_VERSION_1);
                                            ^~~~~~~~~~~~~~~~~~~~~~~

This is related to the BIT macro, which uses an unsigned long literal,
which is 32-bit on ARM so having a shift equal to or larger than 32 will
cause this warning, such as the above, where VIRTIO_F_VERSION_1 is 32.
To avoid this, use BIT_ULL, which will be an unsigned long long. This
matches the size of the features field throughout this driver, which is
u64 so there should be no functional change.

Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
Link: https://github.com/ClangBuiltLinux/linux/issues/1140
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://lore.kernel.org/r/20200821225018.940798-1-natechancellor@gmail.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Acked-by: Eli Cohen <elic@nvidia.com>

vhost-iotlb: fix vhost_iotlb_itree_next() documentation

This patch contains trivial changes for the vhost_iotlb_itree_next()
documentation, fixing the function name and the description of
first argument (@map).

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20200825130543.43308-1-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

vdpa: ifcvf: free config irq in ifcvf_free_irq()

We don't free config irq in ifcvf_free_irq() which will trigger a
BUG() in pci core since we try to free the vectors that has an
action. Fixing this by recording the config irq in ifcvf_hw structure
and free it in ifcvf_free_irq().

Fixes: e7991f376a4d ("ifcvf: implement config interrupt in IFCVF")
Cc: Zhu Lingshan <lingshan.zhu@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20200723091254.20617-2-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Zhu Lingshan <lingshan.zhu@intel.com>
Fixes: e7991f376a4d ("ifcvf: implement config interrupt in IFCVF")
Cc: Zhu Lingshan <a class="moz-txt-link-rfc2396E" href="mailto:lingshan.zhu@intel.com">&lt;lingshan.zhu@intel.com&gt;</a>
Signed-off-by: Jason Wang <a class="moz-txt-link-rfc2396E" href="mailto:jasowang@redhat.com">&lt;jasowang@redhat.com&gt;</a>

vdpa: ifcvf: return err when fail to request config irq

We ignore the err of requesting config interrupt, fix this.

Fixes: e7991f376a4d ("ifcvf: implement config interrupt in IFCVF")
Cc: Zhu Lingshan <lingshan.zhu@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20200723091254.20617-1-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Zhu Lingshan <lingshan.zhu@intel.com>
Fixes: e7991f376a4d ("ifcvf: implement config interrupt in IFCVF")
Cc: Zhu Lingshan <a class="moz-txt-link-rfc2396E" href="mailto:lingshan.zhu@intel.com">&lt;lingshan.zhu@intel.com&gt;</a>
Signed-off-by: Jason Wang <a class="moz-txt-link-rfc2396E" href="mailto:jasowang@redhat.com">&lt;jasowang@redhat.com&gt;</a>
Tested-by: Maxime Coquelin <maxime.coquelin@redhat.com>

lockdep,trace: Expose tracepoints

The lockdep tracepoints are under the lockdep recursion counter, this
has a bunch of nasty side effects:

 - TRACE_IRQFLAGS doesn't work across the entire tracepoint

 - RCU-lockdep doesn't see the tracepoints either, hiding numerous
   "suspicious RCU usage" warnings.

Pull the trace_lock_*() tracepoints completely out from under the
lockdep recursion handling and completely rely on the trace level
recusion handling -- also, tracing *SHOULD* not be taking locks in any
case.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Marco Elver <elver@google.com>
Link: https://lkml.kernel.org/r/20200821085348.782688941@infradead.org

lockdep: Only trace IRQ edges

Problem:

  raw_local_irq_save(); // software state on
  local_irq_save(); // software state off
  ...
  local_irq_restore(); // software state still off, because we don't enable IRQs
  raw_local_irq_restore(); // software state still off, *whoopsie*

existing instances:

 - lock_acquire()
     raw_local_irq_save()
     __lock_acquire()
       arch_spin_lock(&graph_lock)
         pv_wait() := kvm_wait() (same or worse for Xen/HyperV)
           local_irq_save()

 - trace_clock_global()
     raw_local_irq_save()
     arch_spin_lock()
       pv_wait() := kvm_wait()
 local_irq_save()

 - apic_retrigger_irq()
     raw_local_irq_save()
     apic->send_IPI() := default_send_IPI_single_phys()
       local_irq_save()

Possible solutions:

 A) make it work by enabling the tracing inside raw_*()
 B) make it work by keeping tracing disabled inside raw_*()
 C) call it broken and clean it up now

Now, given that the only reason to use the raw_* variant is because you don't
want tracing. Therefore A) seems like a weird option (although it can be done).
C) is tempting, but OTOH it ends up converting a _lot_ of code to raw just
because there is one raw user, this strips the validation/tracing off for all
the other users.

So we pick B) and declare any code that ends up doing:

raw_local_irq_save()
local_irq_save()
lockdep_assert_irqs_disabled();

broken. AFAICT this problem has existed forever, the only reason it came
up is because commit: 859d069ee1dd ("lockdep: Prepare for NMI IRQ
state tracking") changed IRQ tracing vs lockdep recursion and the
first instance is fairly common, the other cases hardly ever happen.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[rewrote changelog]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Marco Elver <elver@google.com>
Link: https://lkml.kernel.org/r/20200723105615.1268126-1-npiggin@gmail.com

mips: Implement arch_irqs_disabled()

Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200826101653.GE1362448@hirez.programming.kicks-ass.net

arm64: Implement arch_irqs_disabled()

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lkml.kernel.org/r/20200821085348.664425120@infradead.org

nds32: Implement arch_irqs_disabled()

Cc: Nick Hu <nickhu@andestech.com>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Marco Elver <elver@google.com>
Link: https://lkml.kernel.org/r/20200821085348.604899379@infradead.org

locking/lockdep: Cleanup

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Marco Elver <elver@google.com>
Link: https://lkml.kernel.org/r/20200821085348.546087214@infradead.org

x86/entry: Remove unused THUNKs

Unused remnants

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Marco Elver <elver@google.com>
Link: https://lkml.kernel.org/r/20200821085348.487040689@infradead.org

cpuidle: Move trace_cpu_idle() into generic code

Remove trace_cpu_idle() from the arch_cpu_idle() implementations and
put it in the generic code, right before disabling RCU. Gets rid of
more trace_*_rcuidle() users.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Marco Elver <elver@google.com>
Link: https://lkml.kernel.org/r/20200821085348.428433395@infradead.org

cpuidle: Make CPUIDLE_FLAG_TLB_FLUSHED generic

This allows moving the leave_mm() call into generic code before
rcu_idle_enter(). Gets rid of more trace_*_rcuidle() users.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Marco Elver <elver@google.com>
Link: https://lkml.kernel.org/r/20200821085348.369441600@infradead.org

sched,idle,rcu: Push rcu_idle deeper into the idle path

Lots of things take locks, due to a wee bug, rcu_lockdep didn't notice
that the locking tracepoints were using RCU.

Push rcu_idle_{enter,exit}() as deep as possible into the idle paths,
this also resolves a lot of _rcuidle()/RCU_NONIDLE() usage.

Specifically, sched_clock_idle_wakeup_event() will use ktime which
will use seqlocks which will tickle lockdep, and
stop_critical_timings() uses lock.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Marco Elver <elver@google.com>
Link: https://lkml.kernel.org/r/20200821085348.310943801@infradead.org

cpuidle: Fixup IRQ state

Match the pattern elsewhere in this file.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Marco Elver <elver@google.com>
Link: https://lkml.kernel.org/r/20200821085348.251340558@infradead.org

lockdep: Use raw_cpu_*() for per-cpu variables

Sven reported that commit a21ee6055c30 ("lockdep: Change
hardirq{s_enabled,_context} to per-cpu variables") caused trouble on
s390 because their this_cpu_*() primitives disable preemption which
then lands back tracing.

On the one hand, per-cpu ops should use preempt_*able_notrace() and
raw_local_irq_*(), on the other hand, we can trivialy use raw_cpu_*()
ops for this.

Fixes: a21ee6055c30 ("lockdep: Change hardirq{s_enabled,_context} to per-cpu variables")
Reported-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200821085348.192346882@infradead.org

sched: Use __always_inline on is_idle_task()

is_idle_task() may be used from noinstr functions such as
irqentry_enter(). Since the compiler is free to not inline regular
inline functions, switch to using __always_inline.

Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200820172046.GA177701@elver.google.com

drm/exynos: gem: Fix sparse warning

kvaddr element of the exynos_gem object points to a memory buffer, thus
it should not have a __iomem annotation. Then, to avoid a warning or
casting on assignment to fbi structure, the screen_buffer element of the
union should be used instead of the screen_base.

Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Merge tag 'nfsd-5.9-1' of git://git.linux-nfs.org/projects/cel/cel-2.6

Pull nfs server fixes from Chuck Lever:

 - Eliminate an oops introduced in v5.8

 - Remove a duplicate #include added by nfsd-5.9

* tag 'nfsd-5.9-1' of git://git.linux-nfs.org/projects/cel/cel-2.6:
  SUNRPC: remove duplicate include
  nfsd: fix oops on mixed NFSv4/NFSv3 client access

Merge tag 'irqchip-fixes-5.9-2' of git://git./linux/kernel/git/maz/arm-platforms into irq/urgent

Pull irqchip fixes from Marc Zyngier:

 - Revert the wholesale conversion to platform drivers of the pdc, sysirq
   and cirq drivers, as it breaks a number of platforms even when the
   driver is built-in (probe ordering bites you).

 - Prevent interrupt from being lost with the STM32 exti driver

 - Fix wake-up interrupts for the MIPS Ingenic driver

 - Fix an embarassing typo in the new module helpers, leading to the probe
   failing most of the time

 - The promised TI firmware rework that couldn't make it into the merge
   window due to a very badly managed set of dependencies

Merge tag 'm68knommu-for-v5.9-rc3' of git://git./linux/kernel/git/gerg/m68knommu

Pull m68knommu fix from Greg Ungerer:
 "Only a single fix for the binfmt_flat loader (reverting a recent
  change)"

* tag 'm68knommu-for-v5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  binfmt_flat: revert "binfmt_flat: don't offset the data start"

io_uring: ensure read requests go through -ERESTART* transformation

We need to call kiocb_done() for any ret < 0 to ensure that we always
get the proper -ERESTARTSYS (and friends) transformation done.

At some point this should be tied into general error handling, so we
can get rid of the various (mostly network) related commands that check
and perform this substitution.

Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge tag 'libnvdimm-fix-v5.9-rc3' of git://git./linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm fixes from Vishal Verma:
 "A couple of minor fixes for things merged in 5.9-rc1.

  One is an out-of-bounds access caught by KASAN, and the second is a
  tweak to some overzealous logging about dax support even for
  traditional block devices which was unnecessary"

* tag 'libnvdimm-fix-v5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  dax: do not print error message for non-persistent memory block device
  libnvdimm: KASAN: global-out-of-bounds Read in internal_create_group

io_uring: don't use poll handler if file can't be nonblocking read/written

There's no point in using the poll handler if we can't do a nonblocking
IO attempt of the operation, since we'll need to go async anyway. In
fact this is actively harmful, as reading from eg pipes won't return 0
to indicate EOF.

Cc: stable@vger.kernel.org # v5.7+
Reported-by: Benedikt Ames <wisp3rwind@posteo.eu>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge branch 'for-linus' of git://git./linux/kernel/git/hid/hid

Pull HID fixes from Jiri Kosina:

 - regression fix / revert of a commit that intended to reduce probing
   delay by ~50ms, but introduced a race that causes quite a few devices
   not to enumerate, or get stuck on first IRQ

 - buffer overflow fix in hiddev, from Peilin Ye

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  Revert "HID: usbhid: do not sleep when opening device"
  HID: hiddev: Fix slab-out-of-bounds write in hiddev_ioctl_usage()
  HID: quirks: Always poll three more Lenovo PixArt mice
  HID: i2c-hid: Always sleep 60ms after I2C_HID_PWR_ON commands
  HID: macally: Constify macally_id_table
  HID: cougar: Constify cougar_id_table

io_uring: fix imbalanced sqo_mm accounting

We do the initial accounting of locked_vm and pinned_vm before we have
setup ctx->sqo_mm, which means we can end up having not accounted the
memory at setup time, but still decrement it when we exit. This causes
an imbalance in the accounting.

Setup ctx->sqo_mm earlier in io_uring_create(), before we do the first
accounting of mm->{locked,pinned}_vm. This also unifies the state
grabbing for the ctx, and eliminates a failure case in
io_sq_offload_start().

Fixes: f74441e6311a ("io_uring: account locked memory before potential error case")
Reported-by: Robert M. Muncrief <rmuncrief@humanavance.com>
Reported-by: Niklas Schnelle <schnelle@linux.ibm.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Tested-by: Robert M. Muncrief <rmuncrief@humanavance.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

PM: sleep: core: Fix the handling of pending runtime resume requests

It has been reported that system-wide suspend may be aborted in the
absence of any wakeup events due to unforseen interactions of it with
the runtume PM framework.

One failing scenario is when there are multiple devices sharing an
ACPI power resource and runtime-resume needs to be carried out for
one of them during system-wide suspend (for example, because it needs
to be reconfigured before the whole system goes to sleep).  In that
case, the runtime-resume of that device involves turning the ACPI
power resource "on" which in turn causes runtime-resume requests
to be queued up for all of the other devices sharing it.  Those
requests go to the runtime PM workqueue which is frozen during
system-wide suspend, so they are not actually taken care of until
the resume of the whole system, but the pm_runtime_barrier()
call in __device_suspend() sees them and triggers system wakeup
events for them which then cause the system-wide suspend to be
aborted if wakeup source objects are in active use.

Of course, the logic that leads to triggering those wakeup events is
questionable in the first place, because clearly there are cases in
which a pending runtime resume request for a device is not connected
to any real wakeup events in any way (like the one above).  Moreover,
it is racy, because the device may be resuming already by the time
the pm_runtime_barrier() runs and so if the driver doesn't take care
of signaling the wakeup event as appropriate, it will be lost.
However, if the driver does take care of that, the extra
pm_wakeup_event() call in the core is redundant.

Accordingly, drop the conditional pm_wakeup_event() call fron
__device_suspend() and make the latter call pm_runtime_barrier()
alone.  Also modify the comment next to that call to reflect the new
code and extend it to mention the need to avoid unwanted interactions
between runtime PM and system-wide device suspend callbacks.

Fixes: 1e2ef05bb8cf8 ("PM: Limit race conditions between runtime PM and system sleep (v2)")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Utkarsh H Patel <utkarsh.h.patel@intel.com>
Tested-by: Utkarsh H Patel <utkarsh.h.patel@intel.com>
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Cc: All applicable <stable@vger.kernel.org>

ACPI: OSL: Prevent acpi_release_memory() from returning too early

After commit 1757659d022b ("ACPI: OSL: Implement deferred unmapping
of ACPI memory") in some cases acpi_release_memory() may return
before the target memory mappings actually go away, because they
are released asynchronously now.

Prevent it from returning prematurely by making it wait for the next
RCU grace period to elapse, for all of the RCU callbacks to complete
and for all of the scheduled work items to be flushed before
returning.

Fixes: 1757659d022b ("ACPI: OSL: Implement deferred unmapping of ACPI memory")
Reported-by: Kenneth R. Crudup <kenny@panix.com>
Tested-by: Kenneth R. Crudup <kenny@panix.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>

usb: typec: tcpm: Fix Fix source hard reset response for TDA 2.3.1.1 and TDA 2.3.1.2 failures

The patch addresses the compliance test failures while running  TDA
2.3.1.1 and  TDA 2.3.1.2 of the "PD Communications Engine USB PD
Compliance MOI" test plan published in https://www.usb.org/usbc.
For a product to be Type-C compliant, it's expected that these tests
are run on usb.org certified Type-C compliance tester as mentioned in
https://www.usb.org/usbc.

While the purpose of TDA 2.3.1.1 and  TDA 2.3.1.2 is to verify that
the static and dynamic electrical capabilities of a Source meet the
requirements for each PDO offered,  while doing so, the tests also
monitor that the timing of the VBUS waveform versus the messages meets
the requirements for Hard Reset defined in PROT-PROC-HR-TSTR as
mentioned in step 11 of TDA.2.3.1.1 and step 15 of TDA.2.3.1.2.

TDB.2.2.13.1: PROT-PROC-HR-TSTR Procedure and Checks for Tester
Originated Hard Reset
Purpose: To perform the appropriate protocol checks relating to any
circumstance in which the Hard Reset signal is sent by the Tester.

UUT is behaving as source:
The Tester sends a Hard Reset signal.
1. Check VBUS stays within present valid voltage range for
tPSHardReset min (25ms) after last bit of Hard Reset signal.
[PROT_PROC_HR_TSTR_1]
2. Check that VBUS starts to fall below present valid voltage range by
tPSHardReset max (35ms). [PROT_PROC_HR_TSTR_2]
3. Check that VBUS reaches vSafe0V within tSafe0v max (650 ms).
[PROT_PROC_HR_TSTR_3]
4. Check that VBUS starts rising to vSafe5V after a delay of
tSrcRecover (0.66s - 1s) from reaching vSafe0V. [PROT_PROC_HR_TSTR_4]
5. Check that VBUS reaches vSafe5V within tSrcTurnOn max (275ms) of
rising above vSafe0v max (0.8V). [PROT_PROC_HR_TSTR_5] Power Delivery
Compliance Plan 139 6. Check that Source Capabilities are finished
sending within tFirstSourceCap max (250ms) of VBUS reaching vSafe5v
min. [PROT_PROC_HR_TSTR_6].

This is in line with 7.1.5 Response to Hard Resets of the USB Power
Delivery Specification Revision 3.0, Version 1.2,
"Hard Reset Signaling indicates a communication failure has occurred
and the Source Shall stop driving VCONN, Shall remove Rp from the
VCONN pin and Shall drive VBUS to vSafe0V as shown in Figure 7-9. The
USB connection May reset during a Hard Reset since the VBUS voltage
will be less than vSafe5V for an extended period of time. After
establishing the vSafe0V voltage condition on VBUS, the Source Shall
wait tSrcRecover before re-applying VCONN and restoring VBUS to
vSafe5V. A Source Shall conform to the VCONN timing as specified in
[USB Type-C 1.3]."

With the above guidelines from the spec in mind, TCPM does not turn
off VCONN while entering SRC_HARD_RESET_VBUS_OFF. The patch makes TCPM
turn off VCONN while entering SRC_HARD_RESET_VBUS_OFF and turn it back
on while entering SRC_HARD_RESET_VBUS_ON along with vbus instead of
having VCONN on through hardreset.

Also, the spec clearly states that "After establishing the vSafe0V
voltage condition on VBUS",  the Source Shall wait tSrcRecover before
re-applying VCONN and restoring VBUS to vSafe5V.
TCPM does not conform to this requirement. If the TCPC driver calls
tcpm_vbus_change with vbus off signal, TCPM right away enters
SRC_HARD_RESET_VBUS_ON without waiting for tSrcRecover.
For TCPC's which are buggy/does not call tcpm_vbus_change, TCPM
assumes that the vsafe0v is instantaneous as TCPM only waits
tSrcRecover instead of waiting for tSafe0v + tSrcRecover.
This patch also fixes this behavior by making sure that TCPM waits for
tSrcRecover before transitioning into SRC_HARD_RESET_VBUS_ON when
tcpm_vbus_change is called by TCPC.
When TCPC does not call tcpm_vbus_change, TCPM assumes the worst case
i.e.  tSafe0v + tSrcRecover before transitioning into
SRC_HARD_RESET_VBUS_ON.

Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20200817184601.1899929-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: PHY: JZ4770: Fix static checker warning.

The commit 2a6c0b82e651 ("USB: PHY: JZ4770: Add support for new
Ingenic SoCs.") introduced the initialization function for different
chips, but left the relevant code involved in the resetting process
in the original function, resulting in uninitialized variable calls.

Fixes: 2a6c0b82e651 ("USB: PHY: JZ4770: Add support for new Ingenic SoCs.").
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Link: https://lore.kernel.org/r/20200825081654.18186-2-zhouyanjie@wanyeetech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: gadget: f_ncm: add bounds checks to ncm_unwrap_ntb()

Some values extracted by ncm_unwrap_ntb() could possibly lead to several
different out of bounds reads of memory.  Specifically the values passed
to netdev_alloc_skb_ip_align() need to be checked so that memory is not
overflowed.

Resolve this by applying bounds checking to a number of different
indexes and lengths of the structure parsing logic.

Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: Brooke Basile <brookebasile@gmail.com>
Acked-by: Felipe Balbi <balbi@kernel.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: gadget: u_f: add overflow checks to VLA macros

size can potentially hold an overflowed value if its assigned expression
is left unchecked, leading to a smaller than needed allocation when
vla_group_size() is used by callers to allocate memory.
To fix this, add a test for saturation before declaring variables and an
overflow check to (n) * sizeof(type).
If the expression results in overflow, vla_group_size() will return SIZE_MAX.

Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Suggested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Brooke Basile <brookebasile@gmail.com>
Acked-by: Felipe Balbi <balbi@kernel.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: revert consumed iov_iter bytes on error

Some consumers of the iov_iter will return an error, but still have
bytes consumed in the iterator. This is an issue for -EAGAIN, since we
rely on a sane iov_iter state across retries.

Fix this by ensuring that we revert consumed bytes, if any, if the file
operations have consumed any bytes from iterator. This is similar to what
generic_file_read_iter() does, and is always safe as we have the previous
bytes count handy already.

Fixes: ff6165b2d7f6 ("io_uring: retain iov_iter state over io_read/io_write calls")
Reported-by: Dmitry Shulyak <yashulyak@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

irqchip/ingenic: Leave parent IRQ unmasked on suspend

All the wakeup sources we possibly want will go through the interrupt
controller, so the parent IRQ must not be masked during suspend, or
there won't be any way to wake up the system.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200819180602.136969-1-paul@crapouillou.net

irqchip/stm32-exti: Avoid losing interrupts due to clearing pending bits by mistake

In the current code, when the eoi callback of the exti clears the pending
bit of the current interrupt, it will first read the values of fpr and
rpr, then logically OR the corresponding bit of the interrupt number,
and finally write back to fpr and rpr.

We found through experiments that if two exti interrupts,
we call them int1/int2, arrive almost at the same time. in our scenario,
the time difference is 30 microseconds, assuming int1 is triggered first.

there will be an extreme scenario: both int's pending bit are set to 1,
the irq handle of int1 is executed first, and eoi handle is then executed,
at this moment, all pending bits are cleared, but the int 2 has not
finally been reported to the cpu yet, which eventually lost int2.

According to stm32's TRM description about rpr and fpr: Writing a 1 to this
bit will trigger a rising edge event on event x, Writing 0 has no
effect.

Therefore, when clearing the pending bit, we only need to clear the
pending bit of the irq.

Fixes: 927abfc4461e7 ("irqchip/stm32: Add stm32mp1 support with hierarchy domain")
Signed-off-by: qiuguorui1 <qiuguorui1@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org # v4.18+
Link: https://lore.kernel.org/r/20200820031629.15582-1-qiuguorui1@huawei.com

irqchip: Revert modular support for drivers using IRQCHIP_PLATFORM_DRIVER helperse

It has become obvious that switching a number of irqchip drivers
to being platform drivers without considering the platform was a
mistake. We have multiple reports of end-point drivers not
probing because the irqchip driver isn't there yet, breaking
the expectations of the users.

This patch reverts:

920ecb8c35cb ("irqchip/mtk-cirq: Convert to a platform driver")
f97dbf48ca43 ("irqchip/mtk-sysirq: Convert to a platform driver")
5be57099d445 ("irqchip/qcom-pdc: Switch to using IRQCHIP_PLATFORM_DRIVER helper macros")
95bf9305d2e3 ("irqchip/qcom-pdc: Allow QCOM_PDC to be loadable as a permanent module")

and leave QCOM PDC, MTK sysrq and cirq drivers as built-in, special purpose
drivers for the time being until we have worked out a better solution.

Reported-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reported-by: Frank Wunderlich <linux@fw-web.de>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/93debe6a0308b66d3f307af67ba7ec2c@kernel.org

dt-bindings: mmc: Add missing description for clk_in/out_sd1

The commit a8fdb80f4d47 ("arm64: zynqmp: Add ZynqMP SDHCI compatible
string") added clock-output-names for both SDHCIs before DT binding yaml
conversion. But only clk_in/out_sd0 clock names have been covered by
DT binding which ends up with dt yaml checking warnings as:
From schema: .../Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml
... mmc@ff170000: clock-output-names:0: 'clk_out_sd0' was expected
... mmc@ff170000: clock-output-names:1: 'clk_in_sd0' was expected

Fixes: 16ecd8f33c6e ("dt-bindings: mmc: convert arasan sdhci bindings to yaml")
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Manish Narani <manish.narani@xilinx.com>
Link: https://lore.kernel.org/r/aef586778921c93377ec2f31c86e151b6e93f6c7.1598257520.git.michal.simek@xilinx.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

drm/omap: fix incorrect lock state

After commit 92cc68e35863c1c61c449efa2b2daef6e9926048 ("drm/vblank: Use
spin_(un)lock_irq() in drm_crtc_vblank_on()") omapdrm locking is broken:

WARNING: inconsistent lock state
5.8.0-rc2-00483-g92cc68e35863 #13 Tainted: G        W
--------------------------------
inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage.
swapper/0/0 [HC1[1]:SC0[0]:HE0:SE1] takes:
ea98222c (&dev->event_lock#2){?.+.}-{2:2}, at: drm_handle_vblank+0x4c/0x520 [drm]
{HARDIRQ-ON-W} state was registered at:
  trace_hardirqs_on+0x9c/0x1ec
  _raw_spin_unlock_irq+0x20/0x58
  omap_crtc_atomic_enable+0x54/0xa0 [omapdrm]
  drm_atomic_helper_commit_modeset_enables+0x218/0x270 [drm_kms_helper]
  omap_atomic_commit_tail+0x48/0xc4 [omapdrm]
  commit_tail+0x9c/0x190 [drm_kms_helper]
  drm_atomic_helper_commit+0x154/0x188 [drm_kms_helper]
  drm_client_modeset_commit_atomic+0x228/0x268 [drm]
  drm_client_modeset_commit_locked+0x60/0x1d0 [drm]
  drm_client_modeset_commit+0x24/0x40 [drm]
  drm_fb_helper_restore_fbdev_mode_unlocked+0x54/0xa8 [drm_kms_helper]
  drm_fb_helper_set_par+0x2c/0x5c [drm_kms_helper]
  drm_fb_helper_hotplug_event.part.0+0xa0/0xbc [drm_kms_helper]
  drm_kms_helper_hotplug_event+0x24/0x30 [drm_kms_helper]
  output_poll_execute+0x1a8/0x1c0 [drm_kms_helper]
  process_one_work+0x268/0x800
  worker_thread+0x30/0x4e0
  kthread+0x164/0x190
  ret_from_fork+0x14/0x20

The reason for this is that omapdrm calls drm_crtc_vblank_on() while
holding event_lock taken with spin_lock_irq().

It is not clear why drm_crtc_vblank_on() and drm_crtc_vblank_get() are
called while holding event_lock. I don't see any problem with moving
those calls outside the lock, which is what this patch does.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819103021.440288-1-tomi.valkeinen@ti.com
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

Merge tag 'v5.9-rc2' into drm-misc-fixes

Backmerge requested by Tomi for a fix to omap inconsistent
locking state issue, and because we need at least v5.9-rc2 now.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Fix cmd parser desc matching with masks

Our variety of defined gpu commands have the actual
command id field and possibly length and flags applied.

We did start to apply the mask during initialization of
the cmd descriptors but forgot to also apply it on comparisons.

Fix comparisons in order to properly deny access with
associated commands.

v2: fix lri with correct mask (Chris)

References: 926abff21a8f ("drm/i915/cmdparser: Ignore Length operands during command matching")
Reported-by: Nicolai Stange <nstange@suse.de>
Cc: stable@vger.kernel.org # v5.4+
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tyler Hicks <tyhicks@canonical.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Chris Wilson <chris.p.wilson@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200817195926.12671-1-mika.kuoppala@linux.intel.com
(cherry picked from commit 3b4efa148da36f158cce3f662e831af2834b8e0f)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

i2c: iproc: Fix shifting 31 bits

Fix undefined behaviour in the iProc I2C driver by using 'BIT' marcro.

Reported-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
[wsa: in commit msg, don't say 'checkpatch' but name the issue]
Signed-off-by: Wolfram Sang <wsa@kernel.org>

i2c: rcar: in slave mode, clear NACK earlier

Currently, a NACK in slave mode is set/cleared when SCL is held low by
the IP core right before the bit is about to be pushed out. This is too
late for clearing and then a NACK from the previous byte is still used
for the current one. Now, let's clear the NACK right after we detected
the STOP condition following the NACK.

Fixes: de20d1857dd6 ("i2c: rcar: add slave support")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

i2c: acpi: Remove dead code, i.e. i2c_acpi_match_device()

We have no users of i2c_acpi_match_device() anymore and seems
will not have them in the future, thus remove dead code.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

i2c: core: Don't fail PRP0001 enumeration when no ID table exist

When commit c64ffff7a9d1 ("i2c: core: Allow empty id_table in ACPI case
as well") fixed the enumeration of I²C devices on ACPI enabled platforms
when driver has no ID table, it missed the PRP0001 support.

i2c_device_match() and i2c_acpi_match_device() differently match
driver against given device. Use acpi_driver_match_device(), that is used
in the former, in i2c_device_probe() and don't fail PRP0001 enumeration
when no ID table exist.

Fixes: c64ffff7a9d1 ("i2c: core: Allow empty id_table in ACPI case as well")
BugLink: https://stackoverflow.com/q/63519678/2511795
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

scsi: scsi_debug: Remove superfluous close zone in resp_open_zone()

resp_open_zone() always calls zbc_open_zone() with parameter explicit set
to true.

If zbc_open_zone() is called with parameter explicit set to true, and the
current zone state is implicit open, it will call zbc_close_zone() on the
zone before proceeding.

Therefore, there is no need for resp_open_zone() to call zbc_close_zone()
on an implicitly open zone before calling zbc_open_zone().

Remove superfluous close zone in resp_open_zone().

Link: https://lore.kernel.org/r/20200821130007.39938-1-niklas.cassel@wdc.com
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: libcxgbi: Fix a use after free in cxgbi_conn_xmit_pdu()

We accidentally move this logging printk after the free, but that leads to
a use after free.

Link: https://lore.kernel.org/r/20200824085933.GD208317@mwanda
Fixes: e33c2482289b ("scsi: cxgb4i: Add support for iSCSI segmentation offload")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qedf: Fix null ptr reference in qedf_stag_change_work

Link: https://lore.kernel.org/r/20200824033436.45570-1-yebin10@huawei.com
Acked-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Documentation: laptops: thinkpad-acpi: fix underline length build warning

Fix underline length build warning in thinkpad-acpi.rst documentation:

Documentation/admin-guide/laptops/thinkpad-acpi.rst:1437: WARNING: Title underline too short.
DYTC Lapmode sensor
------------------

Fixes: acf7f4a59114 ("platform/x86: thinkpad_acpi: lap or desk mode interface")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/7b2ecef9-dfb7-808a-7c05-4e4f44b363c4@infradead.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

Documentation: fix typo for abituguru documentation

Typo fix for abituguru,abituguru3 and abituguru-datasheet

Signed-off-by: Brandon Jiang <brandon.jiang.a@outlook.com>
Link: https://lore.kernel.org/r/DM5PR22MB0892E4FEFCA9ED055B0A8E71AC580@DM5PR22MB0892.namprd22.prod.outlook.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

docs: Fix function name trailing double-()s

I noticed a double-() in the deprecated.rst rendering today. Fix that
one and two others in the Documentation/ tree.

Acked-by: "Paul E. McKenney" <paulmck@kernel.org> # For RCU
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200817233207.4083538-1-keescook@chromium.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

devices.txt: fix typo of "ubd" as "udb"

Signed-off-by: Theodore Dubois <tblodt@icloud.com>
Link: https://lore.kernel.org/r/20200816233823.86316-1-tblodt@icloud.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

Documentation: add riscv entry in list of existing profiles

As long as there are only a few maintainer entry profiles, i.e., three
in v5.8, continue to maintain a complete a list of entries in the
maintainer handbook.

Complete the list by adding the RISC-V ARCHITECTURE maintainer entry
profile found in MAINTAINERS.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20200815115728.15128-1-lukas.bulwahn@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

MAINTAINERS: mention documentation maintainer entry profile

Since commit 53b7f3aa411b ("Add a maintainer entry profile for
documentation"), the documentation "subsystem" has a maintainer entry
profile, and it deserves to be mentioned in MAINTAINERS with a suitable
P: entry.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200815102658.12236-1-lukas.bulwahn@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

Fpga: Documentation: Replace deprecated :c:func: Usage

Replace :c:func: with func() as the previous usage is deprecated.

Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Link: https://lore.kernel.org/r/20200812180224.24810-1-puranjay12@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

IIO: Documentation: Replace deprecated :c:func: Usage

Replace :c:func: with func() as the previous usage is deprecated.

Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Link: https://lore.kernel.org/r/20200812174611.18580-1-puranjay12@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

Documentation/locking/locktypes: fix local_locks documentation

Fix issues with local_locks documentation:
- fix function names, local_lock.h has local_unlock_irqrestore(),
not local_lock_irqrestore()
- fix mapping table, local_unlock_irqrestore() maps to local_irq_restore(),
not _save()

Signed-off-by: Marta Rybczynska <rybczynska@gmail.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/CAApg2=SKxQ3Sqwj6TZnV-0x0cKLXFKDaPvXT4N15MPDMKq724g@mail.gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

lib: Revert use of fallthrough pseudo-keyword in lib/

The following build error for powerpc64 was reported by Nathan Chancellor:

  "$ scripts/config --file arch/powerpc/configs/powernv_defconfig -e KERNEL_XZ

   $ make -skj"$(nproc)" ARCH=powerpc CROSS_COMPILE=powerpc64le-linux- distclean powernv_defconfig zImage
   ...
   In file included from arch/powerpc/boot/../../../lib/decompress_unxz.c:234,
                    from arch/powerpc/boot/decompress.c:38:
   arch/powerpc/boot/../../../lib/xz/xz_dec_stream.c: In function 'dec_main':
   arch/powerpc/boot/../../../lib/xz/xz_dec_stream.c:586:4: error: 'fallthrough' undeclared (first use in this function)
     586 |    fallthrough;
         |    ^~~~~~~~~~~

   This will end up affecting distribution configurations such as Debian
   and OpenSUSE according to my testing. I am not sure what the solution
   is, the PowerPC wrapper does not set -D__KERNEL__ so I am not sure
   that compiler_attributes.h can be safely included."

In order to avoid these sort of problems, it seems that the best
solution is to use /* fall through */ comments instead of the
fallthrough pseudo-keyword macro in lib/, for now.

Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Fixes: df561f6688fe ("treewide: Use fallthrough pseudo-keyword")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-and-tested-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>