drm/exynos: exynos7_drm_decon: add driver data and support for Exynos7870

Add support for Exynos 7870 DECON in the Exynos 7 DECON driver.

Some Exynos 7 series SoCs (Exynos 7580 onwards) have different
register values. In order to address such changes, include a driver
data struct (named decon_data) so that correct base addresses and
shift values can be provided.

Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: exynos7_drm_decon: properly clear channels during bind

The DECON channels are not cleared properly as the windows aren't
shadow protected. When accompanied with an IOMMU, it pagefaults, and
the kernel panics.

Implement shadow protect/unprotect, along with a standalone update,
for channel clearing to properly take effect.

Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: exynos7_drm_decon: fix ideal_clk by converting it to Hz

The clkdiv values are incorrect as ideal_clk is in kHz and the clock
rate of vclk is in Hz. Multiply 1000 to ideal_clk to bring it to Hz.

Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: exynos7_drm_decon: fix uninitialized crtc reference in functions

Modify the functions to accept a pointer to struct decon_context
instead.

Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: remove unused prototype for crtc

exynos_drm_crtc_wait_pending_update, exynos_drm_crtc_finish_update
are not used anymore.

Signed-off-by: Kwanghoon Son <k.son@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: gsc: Fix typo in comment

Replace 'initailization' with 'initialization' in the comment.

Signed-off-by: Shen Lichuan <shenlichuan@vivo.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/imx/dcss: include drm/drm_bridge.h header

Compile-testing random configurations leads to failures in
dcss-kms.c from a missing declaration:

drivers/gpu/drm/imx/dcss/dcss-kms.c:95:8: error: use of undeclared identifier 'drm_bridge_attach'
   95 |         ret = drm_bridge_attach(encoder, bridge, NULL,
      |               ^
drivers/gpu/drm/imx/dcss/dcss-kms.c:96:5: error: use of undeclared identifier 'DRM_BRIDGE_ATTACH_NO_CONNECTOR'
   96 |                                 DRM_BRIDGE_ATTACH_NO_CONNECTOR);
      |                                 ^

Include the header directly.

Fixes: 004555a18d57 ("drm/imx/dcss: Allow build with COMPILE_TEST=y")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241028163527.2425783-1-arnd@kernel.org

Merge tag 'drm-misc-next-2024-10-31' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next

drm-misc-next for v6.13:

All of the previous pull request, with MORE!

Core Changes:
- Update documentation for scheduler start/stop and job init.
- Add dedede and sm8350-hdk hardware to ci runs.

Driver Changes:
- Small fixes and cleanups to panfrost, omap, nouveau, ivpu, zynqmp, v3d,
  panthor docs, and leadtek-ltk050h3146w.
- Crashdump support for qaic.
- Support DP compliance in zynqmp.
- Add Samsung S6E88A0-AMS427AP24 panel.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/deeef745-f3fb-4e85-a9d0-e8d38d43c1cf@linux.intel.com

drm/sched: Document purpose of drm_sched_{start,stop}

drm_sched_start()'s and drm_sched_stop()'s names suggest that those
functions might be intended for actively starting and stopping the
scheduler on initialization and teardown.

They are, however, only used on timeout handling (reset recovery). The
docstrings should reflect that to prevent confusion.

Document those functions' purpose.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241029133819.78696-2-pstanner@redhat.com

drm/panel: leadtek-ltk050h3146w: transition to mipi_dsi wrapped functions

Changes the leadtek-ltk050h3146w panel to use multi style functions for
improved error handling.

Signed-off-by: Tejas Vipin <tejasvipin76@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241026035928.183454-1-tejasvipin76@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241026035928.183454-1-tejasvipin76@gmail.com

drm/panel: samsung-s6e88a0-ams427ap24: Add flip option

The way of implementing a flip option follows the existing
panel-samsung-s6e8aa0.c [1][2][3].

The value to flip the screen is taken from a downstream kernel file of
a similar but older panel [4]. The mipi clock [5] for the new panel
samsung-s6e88a0-ams427ap24 matches 461 MHz and a hardware read-out of the
0xcb values corresponds to revision R01 of that older panel [6]. Although
for samsung-s6e88a0-ams427ap24 that's in non-flipped state while in this
older driver it seems to be the other way around. Further up there is a
hint [7] basically saying for revision R01 to change the first word of the
0xcb command from 0x06 to 0x0e, which is actually setting BIT(3) of that
word. This causes a horizontal flip.

[1] https://github.com/torvalds/linux/blob/v6.11/drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c#L103
[2] https://github.com/torvalds/linux/blob/v6.11/drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c#L207-L211
[3] https://github.com/torvalds/linux/blob/v6.11/drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c#L954-L974
[4] https://github.com/LineageOS/android_kernel_samsung_msm8930-common/blob/lineage-15.1/drivers/video/msm/mipi_samsung_oled_video_qhd_pt-8930.c
[5] https://github.com/LineageOS/android_kernel_samsung_msm8930-common/blob/lineage-15.1/drivers/video/msm/mipi_samsung_oled_video_qhd_pt-8930.c#L2027-L2028
[6] https://github.com/LineageOS/android_kernel_samsung_msm8930-common/blob/lineage-15.1/drivers/video/msm/mipi_samsung_oled_video_qhd_pt-8930.c#L137-L151
[7] https://github.com/LineageOS/android_kernel_samsung_msm8930-common/blob/lineage-15.1/drivers/video/msm/mipi_samsung_oled_video_qhd_pt-8930.c#L66-L74

Signed-off-by: Jakob Hauser <jahau@rocketmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/1491f275e9956b2da1f1e2580abd54f4e459c7d2.1730070570.git.jahau@rocketmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1491f275e9956b2da1f1e2580abd54f4e459c7d2.1730070570.git.jahau@rocketmail.com

drm/panel: samsung-s6e88a0-ams427ap24: Add brightness control

The tables for brightness to candela, aid and elvss were taken from downstream
kernel file "dsi_panel_S6E88A0_AMS427AP24_qhd_octa_video.dtsi" [1][2][3].

The gamma table gets generated in "ss_dsi_smart_dimming_S6E88A0_AMS427AP24.c" [4]
with hard-coded starting values. The function smart_dimming_init() [5] goes
through the v{*}_adjustments, generate_gray_scale and gamma_init procedure.
Instead of calculating it manually, it's easier to compile a custom downstream
kernel with SMART_DIMMING_DEBUG enabled and read out dmesg early at boot.

Selection of the values for aid and elvss are again according to downstream
file "dsi_panel_S6E88A0_AMS427AP24_qhd_octa_video.dtsi" [6][7].

The set of write commands is guided by downstream file "ss_dsi_panel_common.c" [8]
followed by "ss_dsi_panel_S6E88A0_AMS427AP24.c" [9].

The dsi mode flag MIPI_DSI_MODE_VIDEO_NO_HFP prevents screen flickering while
changing the brightness.

[1] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/drivers/video/msm/mdss/samsung/S6E88A0_AMS427AP24/dsi_panel_S6E88A0_AMS427AP24_qhd_octa_video.dtsi#L341-L397
[2] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/drivers/video/msm/mdss/samsung/S6E88A0_AMS427AP24/dsi_panel_S6E88A0_AMS427AP24_qhd_octa_video.dtsi#L214-L254
[3] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/drivers/video/msm/mdss/samsung/S6E88A0_AMS427AP24/dsi_panel_S6E88A0_AMS427AP24_qhd_octa_video.dtsi#L301-L320
[4] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/drivers/video/msm/mdss/samsung/S6E88A0_AMS427AP24/ss_dsi_smart_dimming_S6E88A0_AMS427AP24.c
[5] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/drivers/video/msm/mdss/samsung/S6E88A0_AMS427AP24/ss_dsi_smart_dimming_S6E88A0_AMS427AP24.c#L1816-L1900
[6] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/drivers/video/msm/mdss/samsung/S6E88A0_AMS427AP24/dsi_panel_S6E88A0_AMS427AP24_qhd_octa_video.dtsi#L256-L268
[7] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/drivers/video/msm/mdss/samsung/S6E88A0_AMS427AP24/dsi_panel_S6E88A0_AMS427AP24_qhd_octa_video.dtsi#L322-L334
[8] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/drivers/video/msm/mdss/samsung/ss_dsi_panel_common.c#L1389-L1517
[9] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/drivers/video/msm/mdss/samsung/S6E88A0_AMS427AP24/ss_dsi_panel_S6E88A0_AMS427AP24.c#L666-L678

Signed-off-by: Jakob Hauser <jahau@rocketmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/30c154954a4e0f75d90f6ef6f393a5ba8b3ffea9.1730070570.git.jahau@rocketmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/30c154954a4e0f75d90f6ef6f393a5ba8b3ffea9.1730070570.git.jahau@rocketmail.com

drm/panel: samsung-s6e88a0-ams427ap24: Add initial driver

This initial part of the panel driver was mostly generated by the
"linux-mdss-dsi-panel-driver-generator" tool [1], reading downstream
Android kernel file "dsi_panel_S6E88A0_AMS427AP24_qhd_octa_video.dtsi" [2].

On top of the generic output of the tool, there were a couple of changes
applied:
- Added mipi_dsi_dcs_set_display_on() to function s6e88a0_ams427ap24_on(),
  otherwise the display does not show up.
- In functions s6e88a0_ams427ap24_on() and s6e88a0_ams427ap24_off()
  changed DSI commands to multi context and used "accum_err" returns.
- In functions s6e88a0_ams427ap24_on() and s6e88a0_ams427ap24_off() replaced
  msleep() by mipi_dsi_msleep().
- The function s6e88a0_ams427ap24_get_modes() was changed to make use of
  drm_connector_helper_get_modes_fixed(). This also required to include
  drm/drm_probe_helper.h.
- In function s6e88a0_ams427ap24_probe() registring the regulators was changed
  to devm_regulator_bulk_get_const(). This required to change supplies in struct
  s6e88a0_ams427ap24 to a pointer.
- Removed bool "prepared" from struct s6e88a0_ams427ap24 and according parts in
  functions s6e88a0_ams427ap24_prepare() and s6e88a0_ams427ap24_unprepare().
- Removed include <linux/of.h>, it's not needed.
- Added comments to the mipi_dsi_dcs_write_seq_multi() lines in function
  s6e88a0_ams427ap24_on().

[1] https://github.com/msm8916-mainline/linux-mdss-dsi-panel-driver-generator
[2] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/drivers/video/msm/mdss/samsung/S6E88A0_AMS427AP24/dsi_panel_S6E88A0_AMS427AP24_qhd_octa_video.dtsi

Signed-off-by: Jakob Hauser <jahau@rocketmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/d92ef0036b66520bb6d1ec908165e776cf30c303.1730070570.git.jahau@rocketmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/d92ef0036b66520bb6d1ec908165e776cf30c303.1730070570.git.jahau@rocketmail.com

dt-bindings: display: panel: Add Samsung S6E88A0-AMS427AP24

Add bindings for Samsung AMS427AP24 panel with S6E88A0 controller.

Signed-off-by: Jakob Hauser <jahau@rocketmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/d60428e7dad57efd42948adfd34b81335dabcd1f.1730070570.git.jahau@rocketmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/d60428e7dad57efd42948adfd34b81335dabcd1f.1730070570.git.jahau@rocketmail.com

dt-bindings: display: panel: Move flip properties to panel-common

The flip properties were used by "samsung,s6e8aa0.yaml" only so far. By
introducing "samsung,s6e88a0-ams427ap24.yaml" they become more common.

Signed-off-by: Jakob Hauser <jahau@rocketmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/e4edd8fc07b89006207f5f8962a816ff7f8f4601.1730070570.git.jahau@rocketmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/e4edd8fc07b89006207f5f8962a816ff7f8f4601.1730070570.git.jahau@rocketmail.com

Documentation/gpu: Fix Panthor documentation build warnings

Fix Panthor documentation build errors uncovered by the makedocs target
when building with extra warnings enabled.

Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Fixes: 6a797bdfde77 ("drm/panthor: add sysfs knob for enabling job profiling")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241009214346.2308917-1-adrian.larumbe@collabora.com

drm/v3d: Drop allocation of object without mountpoint

Function drm_gem_shmem_create_with_mnt() creates an object
without using the mountpoint if gemfs is NULL.

Drop the else branch calling drm_gem_shmem_create().

Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241029-v3d-v2-1-c0d3dd328d1b@gmail.com

drm: xlnx: zynqmp_dpsub: fix hotplug detection

drm_kms_helper_poll_init needs to be called after zynqmp_dpsub_kms_init.
zynqmp_dpsub_kms_init creates the connector and without it we don't
enable hotplug detection.

Fixes: eb2d64bfcc17 ("drm: xlnx: zynqmp_dpsub: Report HPD through the bridge")
Cc: stable@vger.kernel.org
Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241028134218.54727-1-lists@steffen.cc

drm: xlnx: zynqmp_disp: layer may be null while releasing

layer->info can be null if we have an error on the first layer in
zynqmp_disp_create_layers

Fixes: 1836fd5ed98d ("drm: xlnx: zynqmp_dpsub: Minimize usage of global flag")
Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241028133941.54264-1-lists@steffen.cc

drm: zynqmp_dp: Add debugfs interface for compliance testing

Add a debugfs interface for exercising the various test modes supported
by the DisplayPort controller. This allows performing compliance
testing, or performing signal integrity measurements on a failing link.
At the moment, we do not support sink-driven link quality testing,
although such support would be fairly easy to add.

Additionally, add some debugfs files for ignoring AUX errors and HPD
events, as this can allow testing with equipment that cannot emulate a
DPRX.

Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
[Tomi: fixed a few minor formatting issues]
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809193600.3360015-9-sean.anderson@linux.dev

drm: zynqmp_dp: Take dp->lock in zynqmp_dp_hpd_work_func

Add a non-locking version of zynqmp_dp_bridge_detect and use it in
zynqmp_dp_hpd_work_func so we can take the lock explicitly. This will
make it easier to check for hpd_ignore when we add debugfs support.

Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809193600.3360015-8-sean.anderson@linux.dev

drm: zynqmp_dp: Split off several helper functions

In preparation for supporting compliance testing, split off several
helper functions. No functional change intended.

Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809193600.3360015-7-sean.anderson@linux.dev

drm: zynqmp_dp: Use AUX IRQs instead of polling

Instead of polling the status register for the AUX status, just enable
the IRQs and signal a completion.

Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809193600.3360015-6-sean.anderson@linux.dev

drm: zynqmp_dp: Convert to a hard IRQ

Now that all of the sleeping work is done outside of the IRQ, we can
convert it to a hard IRQ. Shared IRQs may be triggered even after
calling disable_irq, so use free_irq instead which removes our callback
altogether.

Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809193600.3360015-5-sean.anderson@linux.dev

drm: zynqmp_dp: Don't retrain the link in our IRQ

Retraining the link can take a while, and might involve waiting for
DPCD reads/writes to complete. In preparation for unthreading the IRQ
handler, move this into its own work function.

Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809193600.3360015-4-sean.anderson@linux.dev

drm: zynqmp_dp: Add locking

Add some locking to prevent the IRQ/workers/bridge API calls from stepping
on each other's toes. This lock protects:

- Non-atomic registers configuring the link. That is, everything but the
  IRQ registers (since these are accessed in an atomic fashion), and the DP
  AUX registers (since these don't affect the link). We also access AUX
  while holding this lock, so it would be very tricky to support.
- Link configuration. This is effectively everything in zynqmp_dp which
  isn't read-only after probe time. So from next_bridge onward.

This lock is designed to protect configuration changes so we don't have to
do anything tricky. Configuration should never be in the hot path, so I'm
not worried about performance.

Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809193600.3360015-3-sean.anderson@linux.dev

drm: zynqmp_kms: Unplug DRM device before removal

Prevent userspace accesses to the DRM device from causing
use-after-frees by unplugging the device before we remove it. This
causes any further userspace accesses to result in an error without
further calls into this driver's internals.

Fixes: d76271d22694 ("drm: xlnx: DRM/KMS driver for Xilinx ZynqMP DisplayPort Subsystem")
Closes: https://lore.kernel.org/dri-devel/4d8f4c9b-2efb-4774-9a37-2f257f79b2c9@linux.dev/
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809193600.3360015-2-sean.anderson@linux.dev

accel/ivpu: Move secondary preemption buffer allocation to DMA range

Secondary preemption buffer is accessible by NPU's DMA and can be
allocated with addresses above 4 GB. Move secondary preemption buffer
allocation from SHAVE range which is much smaller (2GB) to DMA range.
This allows to allocate more command queues with corresponding
preemption buffers without running out of address range.

Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241017145817.121590-12-jacek.lawrynowicz@linux.intel.com

accel/ivpu: Increase DMA address range

Increase DMA address range to:
 * 128 GB on 37xx (due to MMU limitations)
 * 256 GB on other generations
Merge User and DMA ranges on 40xx and above as it is possible
to access whole 256 GBs from both FW and DMA.

Increase User range on 37xx from 255MB to 511MB
to allow loading very large models.

Do not set global_alias_pio_base/size on other generations than 37xx
as it's only used on 37xx anyway.

Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241017145817.121590-11-jacek.lawrynowicz@linux.intel.com

accel/ivpu: Add debug Kconfig option

Add CONFIG_DRM_ACCEL_IVPU_DEBUG option that:
 - Adds -DDEBUG that enables printk regardless of the kernel config
 - Enables unsafe module params (that are now disabled by default)

Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241017145817.121590-10-jacek.lawrynowicz@linux.intel.com

accel/ivpu: Don't allocate preemption buffers when MIP is disabled

Do not allocate preemption buffers when Mid Inference Preemption (MIP)
is disabled through test mode.

Rename IVPU_TEST_MODE_PREEMPTION_DISABLE to IVPU_TEST_MODE_MIP_DISABLE
to better describe that this test mode only disables MIP - job level
preemption will still occur.

Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241017145817.121590-9-jacek.lawrynowicz@linux.intel.com

accel/ivpu: Make command queue ID allocated on XArray

Use XArray for dynamic command queue ID allocations instead of fixed
ones. This is required by upcoming changes to UAPI that will allow to
manage command queues by user space instead of having predefined number
of queues in a context.

Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241017145817.121590-8-jacek.lawrynowicz@linux.intel.com

accel/ivpu: Use xa_alloc_cyclic() instead of custom function

Remove custom ivpu_id_alloc() wrapper used for ID allocations
and replace it with standard xa_alloc_cyclic() API.

The idea behind ivpu_id_alloc() was to have monotonic IDs, so the driver
is easier to debug because same IDs are not reused all over. The same
can be achieved just by using appropriate Linux API.

Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241017145817.121590-7-jacek.lawrynowicz@linux.intel.com

accel/ivpu: Unmap partially mapped BOs in case of errors

Ensure that all buffers that were created only partially through
allocated scatter-gather table are unmapped from MMU600 in case of errors.

Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241017145817.121590-6-jacek.lawrynowicz@linux.intel.com

accel/ivpu: Clear CDTAB entry in case of failure

Don't leave a context descriptor in case CFGI_ALL flush fails.
Mark it as invalid (by clearing valid bit) so nothing is left in
partially-initialized state.

Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241017145817.121590-5-jacek.lawrynowicz@linux.intel.com

accel/ivpu: Remove copy engine support

Copy engine was deprecated by the FW and is no longer supported.
Compute engine includes all copy engine functionality and should be used
instead.

This change does not affect user space as the copy engine was never
used outside of a couple of tests.

Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241017145817.121590-4-jacek.lawrynowicz@linux.intel.com

accel/ivpu: Defer MMU root page table allocation

Defer root page table allocation and unify context init/fini functions.
Move allocation of the root page table from the file_priv_open function to
perform a lazy allocation approach during ivpu_bo_pin().

By doing so, we avoid the overhead of allocating page tables for simple
operations like GET_PARAM that do not require them.
Additionally, the MMU context descriptor table initialization has been
moved to the ivpu_mmu_context_map_page function.

This change streamlines the process and ensures that the descriptor table
is only initialized when it is actually needed.
Refactor init/fini functions to remove redundant code and make the context
management more straightforward.

Overall, these changes lead to a reduction in the time taken by the file
descriptor open operation, as the costly root page table allocation is now
avoided for operations that do not require it.

Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241017145817.121590-3-jacek.lawrynowicz@linux.intel.com

accel/ivpu: Do not fail when more than 1 tile is fused

Allow TILE_FUSE register to disable more than 1 tile.
The driver should not prevent such configurations from being functional.

Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241017145817.121590-2-jacek.lawrynowicz@linux.intel.com

drm/nouveau/gr/gf100: Fix missing unlock in gf100_gr_chan_new()

When the call to gf100_grctx_generate() fails, unlock gr->fecs.mutex
before returning the error.

Fixes smatch warning:

drivers/gpu/drm/nouveau/nvkm/engine/gr/gf100.c:480 gf100_gr_chan_new() warn: inconsistent returns '&gr->fecs.mutex'.

Fixes: ca081fff6ecc ("drm/nouveau/gr/gf100-: generate golden context during first object alloc")
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241026173844.2392679-1-lihuafei1@huawei.com

drm/ci: add sm8350-hdk

Add job that executes the IGT test suite for sm8350-hdk.

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241022094509.85510-3-vignesh.raman@collabora.com

drm/ci: add dedede

Add job that executes the IGT test suite for acer-cb317-1h-c3z6-dedede.
dedede boards use 64 bit Intel Jasper Lake processors.

Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241022094509.85510-2-vignesh.raman@collabora.com

Merge tag 'amd-drm-next-6.13-2024-10-25' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-6.13-2024-10-25:

amdgpu:
- SDMA queue reset support
- SMU 13.0.6 updates
- Add debugfs interface to help limit jpeg queue scheduling for testing
- JPEG 4.0.3 updates
- Initial runtime repartitioning support
- GFX9 fixes
- Misc code cleanups
- Rework IP structures to better handle multiple instances of an IP
- DML updates
- DSC fixes
- HDR fixes
- Brightness control updates
- Runtime pm cleanup
- DMCUB fixes
- DCN 3.5 updates
- Struct drm_edid cleanup
- Fetch EDID from _DDC if available
- Ring noop optimizations
- MES logging fixes
- 3DLUT fixes
- DCN 4.x fixes
- SMU 13.x fixes
- Fixes for set_soft_freq_range()
- ACPI fixes
- SMU 14.x updates
- PSR-SU fixes
- fdinfo cleanup
- DCN documentation updates

amdkfd:
- Misc code cleanups
- Increase event FIFO size
- Copy wave state fixes for SDMA

radeon:
- Fix possible overflow in packet3 check
- Late init connector fix
- Always set GEM function pointer

Documentation:
- Update drm-memory documentation

From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241025132336.2416913-1-alexander.deucher@amd.com
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/bridge: tc358767: Fix use of unadjusted mode in the driver

The driver configures mostly Pixel PLL from the clock cached in
local copy of the mode. Make sure the driver uses adjusted mode
which contains the updated Pixel PLL settings negotiated in
tc_dpi_atomic_check()/tc_edp_atomic_check().

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241026041057.247640-1-marex@denx.de

drm/omap: Clean up deadcode functions

dispc_enable_fifomerge() last use was removed by 2012's
commit 85099f11bd03 ("Revert "OMAPDSS: APPLY: add fifo merge support
funcs"")

dispc_has_writeback(), dispc_wb_get_framedone_irq(), dispc_wb_go(),
dispc_wb_go_busy() and dispc_wb_setup() were changed from statics
to public symbols and unwired from a structure by 2020's
commit dac62bcafeaa ("drm/omap: remove dispc_ops")
but didn't have any users.

dispc_mgr_get_clock_div() got renamed from dispc_get_clock_div()
and it's last use was removed in 2011 by commit
42c9dee82129 ("OMAP: DSS2: Remove FB_OMAP_BOOTLOADER_INIT support")

Remove them.

Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241026220010.93773-1-linux@treblig.org

accel/qaic: Add crashdump to Sahara

The Sahara protocol has a crashdump functionality. In the hello
exchange, the device can advertise it has a memory dump available for
the host to collect. Instead of the device making requests of the host,
the host requests data from the device which can be later analyzed.

Implement this functionality and utilize the devcoredump framework for
handing the dump over to userspace.

Similar to how firmware loading in Sahara involves multiple files,
crashdump can consist of multiple files for different parts of the dump.
Structure these into a single buffer that userspace can parse and
extract the original files from.

Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241021200355.544126-1-quic_jhugo@quicinc.com

drm/sched: warn about drm_sched_job_init()'s partial init

drm_sched_job_init()'s name suggests that after the function succeeded,
parameter "job" will be fully initialized. This is not the case; some
members are only later set, notably drm_sched_job.sched by
drm_sched_job_arm().

Document that drm_sched_job_init() does not set all struct members.

Document the lifetime of drm_sched_job.sched.

Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241023141530.113370-2-pstanner@redhat.com

drm/panfrost: Remove unused id_mask from struct panfrost_model

The id_mask field of struct panfrost_model has never been used.

Fixes: f3ba91228e8e ("drm/panfrost: Add initial panfrost driver")
Signed-off-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241025140008.385081-1-steven.price@arm.com

drm/meson: Allow build with COMPILE_TEST=y

Allow meson to be built with COMPILE_TEST=y for greater
coverage. Builds fine on x86/x86_64 at least.

Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: linux-amlogic@lists.infradead.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241003111851.10453-11-ville.syrjala@linux.intel.com
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>

drm/mediatek: Allow build with COMPILE_TEST=y

Allow mediatek to be built with COMPILE_TEST=y for greater
coverage. Builds fine on x86/x86_64 at least.

Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: linux-mediatek@lists.infradead.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241003111851.10453-10-ville.syrjala@linux.intel.com
Reviewed-by: CK Hu <ck.hu@mediatek.com>

drm/imx/dcss: Allow build with COMPILE_TEST=y

Allow imx/dcss to be built with COMPILE_TEST=y for greater
coverage. Builds fine on x86/x86_64 at least.

Cc: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241003111851.10453-8-ville.syrjala@linux.intel.com
Reviewed-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>

drm/imx/dcss: Fix 64bit divisions

Use the appropriate 64bit division helpers to make the code
build on 32bit architectures.

Cc: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241003111851.10453-7-ville.syrjala@linux.intel.com
Reviewed-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>

drm/amdgpu: Fix amdgpu_ip_block_hw_fini()

This NULL check is reversed so the function doesn't work.

Fixes: dad01f93f432 ("drm/amdgpu: validate hw_fini before function call")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/f4fc849e-4e76-4448-8657-caa4c69910b0@stanley.mountain
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Documentation/gpu/amdgpu: Add programming model for DCN

One of the challenges to contributing to the display code is the
complexity of the DC component. This commit adds a documentation page
that discusses the programming model used by DCN and an overview of how
the display code is organized.

Cc: Leo Li <sunpeng.li@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Christian Konig <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Documentation/gpu: Document how to narrow down display issues

The amdgpu driver is composed of multiple components, each of which can
be a source of some specific problem that the user/developer can see.
This commit introduces steps to narrow down and collect display
information.

Cc: Leo Li <sunpeng.li@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Christian Konig <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdgpu: Don't print L2 status if there's nothing to print

If a 2nd fault comes in before the 1st is handled, the 1st fault will
clear out the FAULT STATUS registers before the 2nd fault is handled.
Thus we get a lot of zeroes. If status=0, just skip the L2 fault status
information, to avoid confusion of why some VM fault status prints in
dmesg are all zeroes.

Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add missing tracepoint event in DM atomic_commit_tail

There are two events to trace the beginning and the end of
amdgpu_dm_atomic_commit_tail, but only the one ate the beginning was
placed. Place amdgpu_dm_atomic_commit_tail_finish tracepoint at the end
than.

Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: sever xgmi io link if host driver has disable sharing

Host drivers can create partial hives per guest by disabling xgmi sharing
between certain peers in the main hive.
Typically, these partial hives are fully connected per guest session.
In the event that the host makes a mistake by adding a non-shared node
to a guest session, have the KFD reflect sharing disabled by severing
the IO link.

Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Tested-by: James Yao <yiqing.yao@amd.com>
Reviewed-by: Harish Kasiviswanathan <harish.kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: refine error handling in amdgpu_ttm_tt_pin_userptr

Free sg table when dma_map_sgtable() failed to avoid memory leak.

Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix the logic for NPS request failure

On a hive, NPS request is placed by the first one for all devices in the
hive. If the request fails, mark the mode as UNKNOWN so that subsequent
devices on unload don't request it. Also, fix the mutex double lock
issue in error condition, should have been mutex_unlock.

Fixes: ee52489d1210 ("drm/amdgpu: Place NPS mode request on unload")
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: remove extra use of volatile

as the adding of mb() should be sufficient in function unmap_queues_cpsch,
remove the add of volatile type as recommended

Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Reduce redundant gpu resets on nbio v7.4

On nbio v7.4, ras controller interrupt and athub
interrupt are generated after injecting UE to PCIE,
but gpu reset only needs to be triggered once.

Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge tag 'drm-intel-gt-next-2024-10-23' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-next

Driver Changes:

Fixes/improvements/new stuff:

- Enable PXP GuC autoteardown flow [guc] (Juston Li)
- Retry RING_HEAD reset until it get sticks [gt] (Nitin Gote)
- Add basic PMU support for gen2 [pmu] (Ville Syrjälä)

Miscellaneous:

- Prevent a possible int overflow in wq offsets [guc] (Nikita Zhandarovich)
- PMU code cleanups (Lucas De Marchi)
- Fixed "CPU" -> "GPU" typo [gt] (Zhang He)
- Gen2/3 interrupt handling cleanup (Ville Syrjälä)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tursulin@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Zxi-3wkIwI-Y1Qvj@linux

drm/bridge: dw-hdmi: set bridge's ycbcr_420_allowed flag

Set the drm_bridge's ycbcr_420_allowed flag if the YCbCr 420 output is
supported by the hardware.

Cc: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241019-bridge-yuv420-v1-6-d74efac9e4e6@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dp: migrate the ycbcr_420_allowed to drm_bridge

Instead of forcing the ycbcr_420_allowed flag to be set on the created
drm_connector, set it on the drm_bridge instance and allow
drm_bridge_connecgtor to propagate it to the drm_connector.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241019-bridge-yuv420-v1-5-d74efac9e4e6@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/bridge: aux: allow interlaced and YCbCr 420 output

As both aux bridges are merely passthrough bridges, mark them as
supporting interlaced and YCbCr 420 data. Other bridges in the chain
still might limit interlaced and YCbCr 420 data support on the
corresponding connector.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241019-bridge-yuv420-v1-4-d74efac9e4e6@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/bridge: display-connector: allow YCbCr 420 for HDMI and DP

Allow YCbCr 420 output for HDMI and DisplayPort connectors. Other
bridges in the chain still might limit YCbCr 420 support on the
corresponding connector.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241019-bridge-yuv420-v1-3-d74efac9e4e6@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/atomic: add interlaced and ycbcr_420 flags to connector's state dump

Although the interlace_allowed and ycbcr_420_allowed flags are a part of
the struct drm_connector rather than struct drm_connector_state, still
include them into state dump in order to ease debugging of the setup
issues.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241019-bridge-yuv420-v1-2-d74efac9e4e6@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/display: bridge_connector: handle ycbcr_420_allowed

Follow the interlace_allowed example and calculate drm_connector's
ycbcr_420_allowed flag as AND of all drm_bridge's ycbcr_420_allowed
flags in a chain. This is one of the gaps between several
bridge-specific connector implementations and drm_bridge_connector.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241019-bridge-yuv420-v1-1-d74efac9e4e6@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/panel: s6e3ha8: add static modifier to supply list

Add 'static' modifier to panel supply list.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202410160810.0jaNgxB2-lkp@intel.com/
Fixes: 779679d3c164 ("drm/panel: Add support for S6E3HA8 panel driver")
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241021-starqltechn_upstream_integration_panel_fix-v1-1-81776e89052a@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241021-starqltechn_upstream_integration_panel_fix-v1-1-81776e89052a@gmail.com

drm/amdgpu: handle default profile on on devices without fullscreen 3D

Some devices do not support fullscreen 3D.

v2: Make the check generic.

Fixes: 336568de918e ("drm/amdgpu/swsmu: default to fullscreen 3D profile for dGPUs")
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Kenneth Feng <kenneth.feng@amd.com>
Cc: Lijo Lazar <lijo.lazar@amd.com>

Revert "drm/amdkfd: SMI report dropped event count"

This reverts commit a3ab2d45b9887ee609cd3bea39f668236935774c.

The userspace side for this code is not ready yet so revert
for now.

Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Philip Yang <Philip.Yang@amd.com>

drm/amdgpu: Dereference the ATCS ACPI buffer

Need to dereference the atcs acpi buffer after
the method is executed, otherwise it will result in
a memory leak.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Save VCN shared memory with init reset

VCN shared memory is in framebuffer and there are some flags initialized
during sw_init. Ideally, such programming should be during hw_init.

Make sure the flags are saved during reset on initialization since that
reset will affect frame buffer region. For clarity, separate it out to
another function.

Fixes: 1e4acf4d93cd ("drm/amdgpu: Add reset on init handler for XGMI")
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reported-by: Hao Zhou <hao.zhou@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: clean unused functions of uvd/vcn/vce

Some of the functions pointers of amdgpu_ip_funcs
are not used and are left commented out. Hence this
cleans those up which arent used.

Cc: Leo Liu <leo.liu@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Disable PSR-SU on Parade 08-01 TCON too

Stuart Hayhurst has found that both at bootup and fullscreen VA-API video
is leading to black screens for around 1 second and kernel WARNING [1] traces
when calling dmub_psr_enable() with Parade 08-01 TCON.

These symptoms all go away with PSR-SU disabled for this TCON, so disable
it for now while DMUB traces [2] from the failure can be analyzed and the failure
state properly root caused.

Cc: Marc Rossi <Marc.Rossi@amd.com>
Cc: Hamza Mahfooz <Hamza.Mahfooz@amd.com>
Link: https://gitlab.freedesktop.org/drm/amd/uploads/a832dd515b571ee171b3e3b566e99a13/dmesg.log
Link: https://gitlab.freedesktop.org/drm/amd/uploads/8f13ff3b00963c833e23e68aa8116959/output.log
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2645
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Link: https://lore.kernel.org/r/20240205211233.2601-1-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: clear RB_OVERFLOW bit when enabling interrupts for vega20_ih

Port this change to vega20_ih.c:
commit afbf7955ff01 ("drm/amdgpu: clear RB_OVERFLOW bit when enabling interrupts")

Original commit message:
"Why:
Setting IH_RB_WPTR register to 0 will not clear the RB_OVERFLOW bit
if RB_ENABLE is not set.

How to fix:
Set WPTR_OVERFLOW_CLEAR bit after RB_ENABLE bit is set.
The RB_ENABLE bit is required to be set, together with
WPTR_OVERFLOW_ENABLE bit so that setting WPTR_OVERFLOW_CLEAR bit
would clear the RB_OVERFLOW."

Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Clean the functions pointer set as NULL

We dont need to set the functions to NULL which arent
needed as global structure members are by default
set to zero or NULL for pointers.

Cc: Leo Liu <leo.liu@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: clean the dummy soft_reset functions

Remove the dummy soft_reset functions for all
ip blocks.

Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: clean the dummy wait_for_idle functions

Remove the dummy wait_for_idle functions for all
ip blocks.

Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: clean the dummy suspend functions

Remove the dummy suspend functions for all
ip blocks.

Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: clean the dummy resume functions

Remove the dummy resume functions for all
ip blocks.

Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: validate wait_for_idle before function call

Before making a function call to wait_for_idle,
validate the function pointer like we do in sw_init.

Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: validate resume before function call

Before making a function call to resume, validate
the function pointer like we do in sw_init.

Use the helper function amdgpu_ip_block_resume where
same checks and calls are repeated.

Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: validate suspend before function call

Before making a function call to suspend, validate
the function pointer like we do in sw_init.

Use the helper function amdgpu_ip_block_suspend where
same checks and calls are repeated.

Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: validate hw_fini before function call

Before making a function call to hw_fini, validate
the function pointer like we do in sw_init.

Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: fix the hang caused by the write reorder to fence_addr

make sure KFD_FENCE_INIT write to fence_addr before pm_send_query_status
called, to avoid qcm fence timeout caused by incorrect ordering.

Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx9: Add cleaner shader for GFX9.4.2

This commit adds the cleaner shader microcode for GFX9.4.2 GPUs. The
cleaner shader is a piece of GPU code that is used to clear or
initialize certain GPU resources, such as Local Data Share (LDS), Vector
General Purpose Registers (VGPRs), and Scalar General Purpose Registers
(SGPRs).

Clearing these resources is important for ensuring data isolation
between different workloads running on the GPU. Without the cleaner
shader, residual data from a previous workload could potentially be
accessed by a subsequent workload, leading to data leaks and incorrect
computation results.

The cleaner shader microcode is represented as an array of 32-bit words
(`gfx_9_4_2_cleaner_shader_hex`). This array is the binary
representation of the cleaner shader code, which is written in a
low-level GPU instruction set.

Also, this patch updates the `gfx_v9_0_sw_init` function to initialize
the cleaner shader if the MEC firmware version is 88 or higher. It sets
the `cleaner_shader_ptr` and `cleaner_shader_size` to the appropriate
values and attempts to initialize the cleaner shader.

When the cleaner shader feature is enabled, the AMDGPU driver loads this
array into a specific location in the GPU memory. The GPU then reads
this memory location to fetch and execute the cleaner shader
instructions.

The cleaner shader is executed automatically by the GPU at the end of
each workload, before the next workload starts. This ensures that all
GPU resources are in a clean state before the start of each workload.

This change ensures that the GPU memory is properly cleared between
different processes, preventing data leakage and enhancing security. It
also aligns with the serialization mechanism between KGD and KFD,
ensuring that the GPU state is consistent across different workloads.

Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix typo for sdma6 constant fill packet

Fix typo for sdma6 constant fill packet

Signed-off-by: Frank Min <Frank.Min@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix random data corruption for sdma 7

There is random data corruption caused by const fill, this is caused by
write compression mode not correctly configured.

So correct compression mode for const fill.

Signed-off-by: Frank Min <Frank.Min@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.306

This version brings along following fixes:
- Fix dcn401 idle optimization problem
- Fix cursor corruption on dcn35
- Fix DP LL compliance failures
- Fix SubVP Phantom VBlank End calculation

Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: To change dcn301_init.h guard.

[why & How]
The original guard is wrongly to be set as for dcn30.
Changed it from 30 to 301.

Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Bhuvanachandra Pinninti <bpinnint@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: update fullscreen status to SPL

[Why]
Current fullscreen check in SPL using dm_helpers is out-of-sync
with dc state. This causes an issue during minimal transition
where we pick an invalid intermediate state because the pre and
post fullscreen status are different.

[How]
Add sharpening_required flag to dc_stream_state. Use this flag to
indicate if we are in fullscreen or not. Propagate flag to SPL for
fullscreen status. Remove workaround in DML

Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add a Precise Delay Routine

Fix DP compliance failures 4.2.2.12, 4.3.1.21, 4.9.1.19
caused by imprecise delay on fsleep().

Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Recalculate SubVP Phantom VBlank End in dml21

[WHY]
The phantom stream timing is copied from the main stream as most
parameters are identical, however some need to be recalculated.
Currently VBlank End is not recalculated and copied from the main
incorrectly.

[HOW]
Recalculate VBlank End for phantom stream timing.

Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: temp w/a for DP Link Layer compliance

[Why&How]
Disabling P-State support on full updates for DCN401 results in
introducing additional communication with SMU. A UCLK hard min message
to SMU takes 4 seconds to go through, which was due to DCN not allowing
pstate switch, which was caused by incorrect value for TTU watermark
before blanking the HUBP prior to DPG on for servicing the test request.

Fix the issue temporarily by disallowing pstate changes for compliance
test while test request handler is reworked for a proper fix.

Fixes: 67ea53a4bd9d ("drm/amd/display: Disable DCN401 UCLK P-State support on full updates")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Adding array index check to prevent memory corruption

[Why & How]
Array indices out of bound caused memory corruption. Adding checks to
ensure that array index stays in bound.

Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Leo Chen <leo.chen@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Reuse subvp enable check for DCN401

Reuse subvp enable check from DCN32 for IGT testing of Sub-Viewport
feature on DCN401

Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: w/a to program DISPCLK_R_GATE_DISABLE DCN35

[WHY & HOW]
Cursor corruption observed on USBC display with specific system setup with a
reboot. Cursor memory might still in the lightsleep state due to voltage
issue, we need program DISPCLK_R_GATE_DISABLE to avoid this issue only on
DCN35.

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: temp w/a for dGPU to enter idle optimizations

[Why&How]
vblank immediate disable currently does not work for all asics. On
DCN401, the vblank interrupts never stop coming, and hence we never
get a chance to trigger idle optimizations.

Add a workaround to enable immediate disable only on APUs for now. This
adds a 2-frame delay for triggering idle optimization, which is a
negligible overhead.

Fixes: 58a261bfc967 ("drm/amd/display: use a more lax vblank enable policy for older ASICs")
Fixes: e45b6716de4b ("drm/amd/display: use a more lax vblank enable policy for DCN35+")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: clean the dummy sw_fini functions

Remove the dummy sw_fini functions for all
ip blocks.

Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>