git.monstr.eu Git - linux-2.6-microblaze.git/log

net/handshake: Fix handshake_req_destroy_test1

Recently, handshake_req_destroy_test1 started failing:

Expected handshake_req_destroy_test == req, but
handshake_req_destroy_test == 0000000000000000
req == 0000000060f99b40
not ok 11 req_destroy works

This is because "sock_release(sock)" was replaced with "fput(filp)"
to address a memory leak. Note that sock_release() is synchronous
but fput() usually delays the final close and clean-up.

The delay is not consequential in the other cases that were changed
but handshake_req_destroy_test1 is testing that handshake_req_cancel()
followed by closing the file actually does call the ->hp_destroy
method. Thus the PTR_EQ test at the end has to be sure that the
final close is complete before it checks the pointer.

We cannot use a completion here because if ->hp_destroy is never
called (ie, there is an API bug) then the test will hang.

Reported by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/netdev/ZcKDd1to4MPANCrn@tissot.1015granger.net/T/#mac5c6299f86799f1c71776f3a07f9c566c7c3c40
Fixes: 4a0f07d71b04 ("net/handshake: Fix memory leak in __sock_create() and sock_alloc_file()")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/170724699027.91401.7839730697326806733.stgit@oracle-102.nfsv4bat.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/mlx5: DPLL, Fix possible use after free after delayed work timer triggers

I managed to hit following use after free warning recently:

[ 2169.711665] ==================================================================
[ 2169.714009] BUG: KASAN: slab-use-after-free in __run_timers.part.0+0x179/0x4c0
[ 2169.716293] Write of size 8 at addr ffff88812b326a70 by task swapper/4/0

[ 2169.719022] CPU: 4 PID: 0 Comm: swapper/4 Not tainted 6.8.0-rc2jiri+ #2
[ 2169.720974] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 2169.722457] Call Trace:
[ 2169.722756]  <IRQ>
[ 2169.723024]  dump_stack_lvl+0x58/0xb0
[ 2169.723417]  print_report+0xc5/0x630
[ 2169.723807]  ? __virt_addr_valid+0x126/0x2b0
[ 2169.724268]  kasan_report+0xbe/0xf0
[ 2169.724667]  ? __run_timers.part.0+0x179/0x4c0
[ 2169.725116]  ? __run_timers.part.0+0x179/0x4c0
[ 2169.725570]  __run_timers.part.0+0x179/0x4c0
[ 2169.726003]  ? call_timer_fn+0x320/0x320
[ 2169.726404]  ? lock_downgrade+0x3a0/0x3a0
[ 2169.726820]  ? kvm_clock_get_cycles+0x14/0x20
[ 2169.727257]  ? ktime_get+0x92/0x150
[ 2169.727630]  ? lapic_next_deadline+0x35/0x60
[ 2169.728069]  run_timer_softirq+0x40/0x80
[ 2169.728475]  __do_softirq+0x1a1/0x509
[ 2169.728866]  irq_exit_rcu+0x95/0xc0
[ 2169.729241]  sysvec_apic_timer_interrupt+0x6b/0x80
[ 2169.729718]  </IRQ>
[ 2169.729993]  <TASK>
[ 2169.730259]  asm_sysvec_apic_timer_interrupt+0x16/0x20
[ 2169.730755] RIP: 0010:default_idle+0x13/0x20
[ 2169.731190] Code: c0 08 00 00 00 4d 29 c8 4c 01 c7 4c 29 c2 e9 72 ff ff ff cc cc cc cc 8b 05 9a 7f 1f 02 85 c0 7e 07 0f 00 2d cf 69 43 00 fb f4 <fa> c3 66 66 2e 0f 1f 84 00 00 00 00 00 65 48 8b 04 25 c0 93 04 00
[ 2169.732759] RSP: 0018:ffff888100dbfe10 EFLAGS: 00000242
[ 2169.733264] RAX: 0000000000000001 RBX: ffff888100d9c200 RCX: ffffffff8241bd62
[ 2169.733925] RDX: ffffed109a848b15 RSI: 0000000000000004 RDI: ffffffff8127ac55
[ 2169.734566] RBP: 0000000000000004 R08: 0000000000000000 R09: ffffed109a848b14
[ 2169.735200] R10: ffff8884d42458a3 R11: 000000000000ba7e R12: ffffffff83d7d3a0
[ 2169.735835] R13: 1ffff110201b7fc6 R14: 0000000000000000 R15: ffff888100d9c200
[ 2169.736478]  ? ct_kernel_exit.constprop.0+0xa2/0xc0
[ 2169.736954]  ? do_idle+0x285/0x290
[ 2169.737323]  default_idle_call+0x63/0x90
[ 2169.737730]  do_idle+0x285/0x290
[ 2169.738089]  ? arch_cpu_idle_exit+0x30/0x30
[ 2169.738511]  ? mark_held_locks+0x1a/0x80
[ 2169.738917]  ? lockdep_hardirqs_on_prepare+0x12e/0x200
[ 2169.739417]  cpu_startup_entry+0x30/0x40
[ 2169.739825]  start_secondary+0x19a/0x1c0
[ 2169.740229]  ? set_cpu_sibling_map+0xbd0/0xbd0
[ 2169.740673]  secondary_startup_64_no_verify+0x15d/0x16b
[ 2169.741179]  </TASK>

[ 2169.741686] Allocated by task 1098:
[ 2169.742058]  kasan_save_stack+0x1c/0x40
[ 2169.742456]  kasan_save_track+0x10/0x30
[ 2169.742852]  __kasan_kmalloc+0x83/0x90
[ 2169.743246]  mlx5_dpll_probe+0xf5/0x3c0 [mlx5_dpll]
[ 2169.743730]  auxiliary_bus_probe+0x62/0xb0
[ 2169.744148]  really_probe+0x127/0x590
[ 2169.744534]  __driver_probe_device+0xd2/0x200
[ 2169.744973]  device_driver_attach+0x6b/0xf0
[ 2169.745402]  bind_store+0x90/0xe0
[ 2169.745761]  kernfs_fop_write_iter+0x1df/0x2a0
[ 2169.746210]  vfs_write+0x41f/0x790
[ 2169.746579]  ksys_write+0xc7/0x160
[ 2169.746947]  do_syscall_64+0x6f/0x140
[ 2169.747333]  entry_SYSCALL_64_after_hwframe+0x46/0x4e

[ 2169.748049] Freed by task 1220:
[ 2169.748393]  kasan_save_stack+0x1c/0x40
[ 2169.748789]  kasan_save_track+0x10/0x30
[ 2169.749188]  kasan_save_free_info+0x3b/0x50
[ 2169.749621]  poison_slab_object+0x106/0x180
[ 2169.750044]  __kasan_slab_free+0x14/0x50
[ 2169.750451]  kfree+0x118/0x330
[ 2169.750792]  mlx5_dpll_remove+0xf5/0x110 [mlx5_dpll]
[ 2169.751271]  auxiliary_bus_remove+0x2e/0x40
[ 2169.751694]  device_release_driver_internal+0x24b/0x2e0
[ 2169.752191]  unbind_store+0xa6/0xb0
[ 2169.752563]  kernfs_fop_write_iter+0x1df/0x2a0
[ 2169.753004]  vfs_write+0x41f/0x790
[ 2169.753381]  ksys_write+0xc7/0x160
[ 2169.753750]  do_syscall_64+0x6f/0x140
[ 2169.754132]  entry_SYSCALL_64_after_hwframe+0x46/0x4e

[ 2169.754847] Last potentially related work creation:
[ 2169.755315]  kasan_save_stack+0x1c/0x40
[ 2169.755709]  __kasan_record_aux_stack+0x9b/0xf0
[ 2169.756165]  __queue_work+0x382/0x8f0
[ 2169.756552]  call_timer_fn+0x126/0x320
[ 2169.756941]  __run_timers.part.0+0x2ea/0x4c0
[ 2169.757376]  run_timer_softirq+0x40/0x80
[ 2169.757782]  __do_softirq+0x1a1/0x509

[ 2169.758387] Second to last potentially related work creation:
[ 2169.758924]  kasan_save_stack+0x1c/0x40
[ 2169.759322]  __kasan_record_aux_stack+0x9b/0xf0
[ 2169.759773]  __queue_work+0x382/0x8f0
[ 2169.760156]  call_timer_fn+0x126/0x320
[ 2169.760550]  __run_timers.part.0+0x2ea/0x4c0
[ 2169.760978]  run_timer_softirq+0x40/0x80
[ 2169.761381]  __do_softirq+0x1a1/0x509

[ 2169.761998] The buggy address belongs to the object at ffff88812b326a00
                which belongs to the cache kmalloc-256 of size 256
[ 2169.763061] The buggy address is located 112 bytes inside of
                freed 256-byte region [ffff88812b326a00, ffff88812b326b00)

[ 2169.764346] The buggy address belongs to the physical page:
[ 2169.764866] page:000000000f2b1e89 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x12b324
[ 2169.765731] head:000000000f2b1e89 order:2 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[ 2169.766484] anon flags: 0x200000000000840(slab|head|node=0|zone=2)
[ 2169.767048] page_type: 0xffffffff()
[ 2169.767422] raw: 0200000000000840 ffff888100042b40 0000000000000000 dead000000000001
[ 2169.768183] raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000
[ 2169.768899] page dumped because: kasan: bad access detected

[ 2169.769649] Memory state around the buggy address:
[ 2169.770116]  ffff88812b326900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 2169.770805]  ffff88812b326980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 2169.771485] >ffff88812b326a00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 2169.772173]                                                              ^
[ 2169.772787]  ffff88812b326a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 2169.773477]  ffff88812b326b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 2169.774160] ==================================================================
[ 2169.774845] ==================================================================

I didn't manage to reproduce it. Though the issue seems to be obvious.
There is a chance that the mlx5_dpll_remove() calls
cancel_delayed_work() when the work runs and manages to re-arm itself.
In that case, after delay timer triggers next attempt to queue it,
it works with freed memory.

Fix this by using cancel_delayed_work_sync() instead which makes sure
that work is done when it returns.

Fixes: 496fd0a26bbf ("mlx5: Implement SyncE support using DPLL infrastructure")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240206164328.360313-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

dpll: fix possible deadlock during netlink dump operation

Recently, I've been hitting following deadlock warning during dpll pin
dump:

[52804.637962] ======================================================
[52804.638536] WARNING: possible circular locking dependency detected
[52804.639111] 6.8.0-rc2jiri+ #1 Not tainted
[52804.639529] ------------------------------------------------------
[52804.640104] python3/2984 is trying to acquire lock:
[52804.640581] ffff88810e642678 (nlk_cb_mutex-GENERIC){+.+.}-{3:3}, at: netlink_dump+0xb3/0x780
[52804.641417]
               but task is already holding lock:
[52804.642010] ffffffff83bde4c8 (dpll_lock){+.+.}-{3:3}, at: dpll_lock_dumpit+0x13/0x20
[52804.642747]
               which lock already depends on the new lock.

[52804.643551]
               the existing dependency chain (in reverse order) is:
[52804.644259]
               -> #1 (dpll_lock){+.+.}-{3:3}:
[52804.644836]        lock_acquire+0x174/0x3e0
[52804.645271]        __mutex_lock+0x119/0x1150
[52804.645723]        dpll_lock_dumpit+0x13/0x20
[52804.646169]        genl_start+0x266/0x320
[52804.646578]        __netlink_dump_start+0x321/0x450
[52804.647056]        genl_family_rcv_msg_dumpit+0x155/0x1e0
[52804.647575]        genl_rcv_msg+0x1ed/0x3b0
[52804.648001]        netlink_rcv_skb+0xdc/0x210
[52804.648440]        genl_rcv+0x24/0x40
[52804.648831]        netlink_unicast+0x2f1/0x490
[52804.649290]        netlink_sendmsg+0x36d/0x660
[52804.649742]        __sock_sendmsg+0x73/0xc0
[52804.650165]        __sys_sendto+0x184/0x210
[52804.650597]        __x64_sys_sendto+0x72/0x80
[52804.651045]        do_syscall_64+0x6f/0x140
[52804.651474]        entry_SYSCALL_64_after_hwframe+0x46/0x4e
[52804.652001]
               -> #0 (nlk_cb_mutex-GENERIC){+.+.}-{3:3}:
[52804.652650]        check_prev_add+0x1ae/0x1280
[52804.653107]        __lock_acquire+0x1ed3/0x29a0
[52804.653559]        lock_acquire+0x174/0x3e0
[52804.653984]        __mutex_lock+0x119/0x1150
[52804.654423]        netlink_dump+0xb3/0x780
[52804.654845]        __netlink_dump_start+0x389/0x450
[52804.655321]        genl_family_rcv_msg_dumpit+0x155/0x1e0
[52804.655842]        genl_rcv_msg+0x1ed/0x3b0
[52804.656272]        netlink_rcv_skb+0xdc/0x210
[52804.656721]        genl_rcv+0x24/0x40
[52804.657119]        netlink_unicast+0x2f1/0x490
[52804.657570]        netlink_sendmsg+0x36d/0x660
[52804.658022]        __sock_sendmsg+0x73/0xc0
[52804.658450]        __sys_sendto+0x184/0x210
[52804.658877]        __x64_sys_sendto+0x72/0x80
[52804.659322]        do_syscall_64+0x6f/0x140
[52804.659752]        entry_SYSCALL_64_after_hwframe+0x46/0x4e
[52804.660281]
               other info that might help us debug this:

[52804.661077]  Possible unsafe locking scenario:

[52804.661671]        CPU0                    CPU1
[52804.662129]        ----                    ----
[52804.662577]   lock(dpll_lock);
[52804.662924]                                lock(nlk_cb_mutex-GENERIC);
[52804.663538]                                lock(dpll_lock);
[52804.664073]   lock(nlk_cb_mutex-GENERIC);
[52804.664490]

The issue as follows: __netlink_dump_start() calls control->start(cb)
with nlk->cb_mutex held. In control->start(cb) the dpll_lock is taken.
Then nlk->cb_mutex is released and taken again in netlink_dump(), while
dpll_lock still being held. That leads to ABBA deadlock when another
CPU races with the same operation.

Fix this by moving dpll_lock taking into dumpit() callback which ensures
correct lock taking order.

Fixes: 9d71b54b65b1 ("dpll: netlink: Add DPLL framework base functions")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://lore.kernel.org/r/20240207115902.371649-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'net-6.8-rc4' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Paolo Abeni:
"Including fixes from WiFi and netfilter.

  Current release - regressions:

   - nic: intel: fix old compiler regressions

   - netfilter: ipset: missing gc cancellations fixed

  Current release - new code bugs:

   - netfilter: ctnetlink: fix filtering for zone 0

  Previous releases - regressions:

   - core: fix from address in memcpy_to_iter_csum()

   - netfilter: nfnetlink_queue: un-break NF_REPEAT

   - af_unix: fix memory leak for dead unix_(sk)->oob_skb in GC.

   - devlink: avoid potential loop in devlink_rel_nested_in_notify_work()

   - iwlwifi:
       - mvm: fix a battery life regression
       - fix double-free bug

   - mac80211: fix waiting for beacons logic

   - nic: nfp: flower: prevent re-adding mac index for bonded port

  Previous releases - always broken:

   - rxrpc: fix generation of serial numbers to skip zero

   - tipc: check the bearer type before calling tipc_udp_nl_bearer_add()

   - tunnels: fix out of bounds access when building IPv6 PMTU error

   - nic: hv_netvsc: register VF in netvsc_probe if NET_DEVICE_REGISTER
     missed

   - nic: atlantic: fix DMA mapping for PTP hwts ring

  Misc:

   - selftests: more fixes to deal with very slow hosts"

* tag 'net-6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (80 commits)
  netfilter: nft_set_pipapo: remove scratch_aligned pointer
  netfilter: nft_set_pipapo: add helper to release pcpu scratch area
  netfilter: nft_set_pipapo: store index in scratch maps
  netfilter: nft_set_rbtree: skip end interval element from gc
  netfilter: nfnetlink_queue: un-break NF_REPEAT
  netfilter: nf_tables: use timestamp to check for set element timeout
  netfilter: nft_ct: reject direction for ct id
  netfilter: ctnetlink: fix filtering for zone 0
  s390/qeth: Fix potential loss of L3-IP@ in case of network issues
  netfilter: ipset: Missing gc cancellations fixed
  octeontx2-af: Initialize maps.
  net: ethernet: ti: cpsw: enable mac_managed_pm to fix mdio
  net: ethernet: ti: cpsw_new: enable mac_managed_pm to fix mdio
  netfilter: nft_set_pipapo: remove static in nft_pipapo_get()
  netfilter: nft_compat: restrict match/target protocol to u16
  netfilter: nft_compat: reject unused compat flag
  netfilter: nft_compat: narrow down revision to unsigned 8-bits
  net: intel: fix old compiler regressions
  MAINTAINERS: Maintainer change for rds
  selftests: cmsg_ipv6: repeat the exact packet
  ...

Merge tag 'pinctrl-v6.8-2' of git://git./linux/kernel/git/linusw/linux-pinctrl

Pull pinctrl fix from Linus Walleij:
"A single fix for the AMD driver which affects developer laptops, the
pinctrl/GPIO driver won't probe on some systems"

* tag 'pinctrl-v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: amd: Add IRQF_ONESHOT to the interrupt request

Merge tag 'nf-24-02-08' of git://git./linux/kernel/git/netfilter/nf

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Narrow down target/match revision to u8 in nft_compat.

2) Bail out with unused flags in nft_compat.

3) Restrict layer 4 protocol to u16 in nft_compat.

4) Remove static in pipapo get command that slipped through when
   reducing set memory footprint.

5) Follow up incremental fix for the ipset performance regression,
   this includes the missing gc cancellation, from Jozsef Kadlecsik.

6) Allow to filter by zone 0 in ctnetlink, do not interpret zone 0
   as no filtering, from Felix Huettner.

7) Reject direction for NFT_CT_ID.

8) Use timestamp to check for set element expiration while transaction
   is handled to prevent garbage collection from removing set elements
   that were just added by this transaction. Packet path and netlink
   dump/get path still use current time to check for expiration.

9) Restore NF_REPEAT in nfnetlink_queue, from Florian Westphal.

10) map_index needs to be percpu and per-set, not just percpu.
    At this time its possible for a pipapo set to fill the all-zero part
    with ones and take the 'might have bits set' as 'start-from-zero' area.
    From Florian Westphal. This includes three patches:

    - Change scratchpad area to a structure that provides space for a
      per-set-and-cpu toggle and uses it of the percpu one.

    - Add a new free helper to prepare for the next patch.

    - Remove the scratch_aligned pointer and makes AVX2 implementation
      use the exact same memory addresses for read/store of the matching
      state.

netfilter pull request 24-02-08

* tag 'nf-24-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nft_set_pipapo: remove scratch_aligned pointer
  netfilter: nft_set_pipapo: add helper to release pcpu scratch area
  netfilter: nft_set_pipapo: store index in scratch maps
  netfilter: nft_set_rbtree: skip end interval element from gc
  netfilter: nfnetlink_queue: un-break NF_REPEAT
  netfilter: nf_tables: use timestamp to check for set element timeout
  netfilter: nft_ct: reject direction for ct id
  netfilter: ctnetlink: fix filtering for zone 0
  netfilter: ipset: Missing gc cancellations fixed
  netfilter: nft_set_pipapo: remove static in nft_pipapo_get()
  netfilter: nft_compat: restrict match/target protocol to u16
  netfilter: nft_compat: reject unused compat flag
  netfilter: nft_compat: narrow down revision to unsigned 8-bits
====================

Link: https://lore.kernel.org/r/20240208112834.1433-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

netfilter: nft_set_pipapo: remove scratch_aligned pointer

use ->scratch for both avx2 and the generic implementation.

After previous change the scratch->map member is always aligned properly
for AVX2, so we can just use scratch->map in AVX2 too.

The alignoff delta is stored in the scratchpad so we can reconstruct
the correct address to free the area again.

Fixes: 7400b063969b ("nft_set_pipapo: Introduce AVX2-based lookup implementation")
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nft_set_pipapo: add helper to release pcpu scratch area

After next patch simple kfree() is not enough anymore, so add
a helper for it.

Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nft_set_pipapo: store index in scratch maps

Pipapo needs a scratchpad area to keep state during matching.
This state can be large and thus cannot reside on stack.

Each set preallocates percpu areas for this.

On each match stage, one scratchpad half starts with all-zero and the other
is inited to all-ones.

At the end of each stage, the half that starts with all-ones is
always zero. Before next field is tested, pointers to the two halves
are swapped, i.e. resmap pointer turns into fill pointer and vice versa.

After the last field has been processed, pipapo stashes the
index toggle in a percpu variable, with assumption that next packet
will start with the all-zero half and sets all bits in the other to 1.

This isn't reliable.

There can be multiple sets and we can't be sure that the upper
and lower half of all set scratch map is always in sync (lookups
can be conditional), so one set might have swapped, but other might
not have been queried.

Thus we need to keep the index per-set-and-cpu, just like the
scratchpad.

Note that this bug fix is incomplete, there is a related issue.

avx2 and normal implementation might use slightly different areas of the
map array space due to the avx2 alignment requirements, so
m->scratch (generic/fallback implementation) and ->scratch_aligned
(avx) may partially overlap. scratch and scratch_aligned are not distinct
objects, the latter is just the aligned address of the former.

After this change, write to scratch_align->map_index may write to
scratch->map, so this issue becomes more prominent, we can set to 1
a bit in the supposedly-all-zero area of scratch->map[].

A followup patch will remove the scratch_aligned and makes generic and
avx code use the same (aligned) area.

Its done in a separate change to ease review.

Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges")
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nft_set_rbtree: skip end interval element from gc

rbtree lazy gc on insert might collect an end interval element that has
been just added in this transactions, skip end interval elements that
are not yet active.

Fixes: f718863aca46 ("netfilter: nft_set_rbtree: fix overlap expiration walk")
Cc: stable@vger.kernel.org
Reported-by: lonial con <kongln9170@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nfnetlink_queue: un-break NF_REPEAT

Only override userspace verdict if the ct hook returns something
other than ACCEPT.

Else, this replaces NF_REPEAT (run all hooks again) with NF_ACCEPT
(move to next hook).

Fixes: 6291b3a67ad5 ("netfilter: conntrack: convert nf_conntrack_update to netfilter verdicts")
Reported-by: l.6diay@passmail.com
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nf_tables: use timestamp to check for set element timeout

Add a timestamp field at the beginning of the transaction, store it
in the nftables per-netns area.

Update set backend .insert, .deactivate and sync gc path to use the
timestamp, this avoids that an element expires while control plane
transaction is still unfinished.

.lookup and .update, which are used from packet path, still use the
current time to check if the element has expired. And .get path and dump
also since this runs lockless under rcu read size lock. Then, there is
async gc which also needs to check the current time since it runs
asynchronously from a workqueue.

Fixes: c3e1b005ed1c ("netfilter: nf_tables: add set element timeout support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nft_ct: reject direction for ct id

Direction attribute is ignored, reject it in case this ever needs to be
supported

Fixes: 3087c3f7c23b ("netfilter: nft_ct: Add ct id support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: ctnetlink: fix filtering for zone 0

previously filtering for the default zone would actually skip the zone
filter and flush all zones.

Fixes: eff3c558bb7e ("netfilter: ctnetlink: support filtering by zone")
Reported-by: Ilya Maximets <i.maximets@ovn.org>
Closes: https://lore.kernel.org/netdev/2032238f-31ac-4106-8f22-522e76df5a12@ovn.org/
Signed-off-by: Felix Huettner <felix.huettner@mail.schwarz>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

s390/qeth: Fix potential loss of L3-IP@ in case of network issues

Symptom:
In case of a bad cable connection (e.g. dirty optics) a fast sequence of
network DOWN-UP-DOWN-UP could happen. UP triggers recovery of the qeth
interface. In case of a second DOWN while recovery is still ongoing, it
can happen that the IP@ of a Layer3 qeth interface is lost and will not
be recovered by the second UP.

Problem:
When registration of IP addresses with Layer 3 qeth devices fails, (e.g.
because of bad address format) the respective IP address is deleted from
its hash-table in the driver. If registration fails because of a ENETDOWN
condition, the address should stay in the hashtable, so a subsequent
recovery can restore it.

3caa4af834df ("qeth: keep ip-address after LAN_OFFLINE failure")
fixes this for registration failures during normal operation, but not
during recovery.

Solution:
Keep L3-IP address in case of ENETDOWN in qeth_l3_recover_ip(). For
consistency with qeth_l3_add_ip() we also keep it in case of EADDRINUSE,
i.e. for some reason the card already/still has this address registered.

Fixes: 4a71df50047f ("qeth: new qeth device driver")
Cc: stable@vger.kernel.org
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Link: https://lore.kernel.org/r/20240206085849.2902775-1-wintera@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

netfilter: ipset: Missing gc cancellations fixed

The patch fdb8e12cc2cc ("netfilter: ipset: fix performance regression
in swap operation") missed to add the calls to gc cancellations
at the error path of create operations and at module unload. Also,
because the half of the destroy operations now executed by a
function registered by call_rcu(), neither NFNL_SUBSYS_IPSET mutex
or rcu read lock is held and therefore the checking of them results
false warnings.

Fixes: 97f7cf1cd80e ("netfilter: ipset: fix performance regression in swap operation")
Reported-by: syzbot+52bbc0ad036f6f0d4a25@syzkaller.appspotmail.com
Reported-by: Brad Spengler <spender@grsecurity.net>
Reported-by: Стас Ничипорович <stasn77@gmail.com>
Tested-by: Brad Spengler <spender@grsecurity.net>
Tested-by: Стас Ничипорович <stasn77@gmail.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

octeontx2-af: Initialize maps.

kmalloc_array() without __GFP_ZERO flag does not initialize
memory to zero. This causes issues. Use kcalloc() for maps and
bitmap_zalloc() for bitmaps.

Fixes: dd7842878633 ("octeontx2-af: Add new devlink param to configure maximum usable NIX block LFs")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Reviewed-by: Brett Creeley <bcreeley@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240206024000.1070260-1-rkannoth@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge branch 'cpsw-enable-mac_managed_pm-to-fix-mdio'

Sinthu Raja says:

====================
CPSW: enable mac_managed_pm to fix mdio

This patch fix the resume/suspend issue on CPSW interface.

Reference from the foloowing patchwork:
https://lore.kernel.org/netdev/20221014144729.1159257-2-shenwei.wang@nxp.com/T/

V1: https://patchwork.kernel.org/project/netdevbpf/patch/20240122083414.6246-1-sinthu.raja@ti.com/
V2: https://patchwork.kernel.org/project/netdevbpf/patch/20240122093326.7618-1-sinthu.raja@ti.com/
====================

Link: https://lore.kernel.org/r/20240206005928.15703-1-sinthu.raja@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: ethernet: ti: cpsw: enable mac_managed_pm to fix mdio

The below commit  introduced a WARN when phy state is not in the states:
PHY_HALTED, PHY_READY and PHY_UP.
commit 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state")

When cpsw resumes, there have port in PHY_NOLINK state, so the below
warning comes out. Set mac_managed_pm be true to tell mdio that the phy
resume/suspend is managed by the mac, to fix the following warning:

WARNING: CPU: 0 PID: 965 at drivers/net/phy/phy_device.c:326 mdio_bus_phy_resume+0x140/0x144
CPU: 0 PID: 965 Comm: sh Tainted: G           O       6.1.46-g247b2535b2 #1
Hardware name: Generic AM33XX (Flattened Device Tree)
unwind_backtrace from show_stack+0x18/0x1c
show_stack from dump_stack_lvl+0x24/0x2c
dump_stack_lvl from __warn+0x84/0x15c
__warn from warn_slowpath_fmt+0x1a8/0x1c8
warn_slowpath_fmt from mdio_bus_phy_resume+0x140/0x144
mdio_bus_phy_resume from dpm_run_callback+0x3c/0x140
dpm_run_callback from device_resume+0xb8/0x2b8
device_resume from dpm_resume+0x144/0x314
dpm_resume from dpm_resume_end+0x14/0x20
dpm_resume_end from suspend_devices_and_enter+0xd0/0x924
suspend_devices_and_enter from pm_suspend+0x2e0/0x33c
pm_suspend from state_store+0x74/0xd0
state_store from kernfs_fop_write_iter+0x104/0x1ec
kernfs_fop_write_iter from vfs_write+0x1b8/0x358
vfs_write from ksys_write+0x78/0xf8
ksys_write from ret_fast_syscall+0x0/0x54
Exception stack(0xe094dfa8 to 0xe094dff0)
dfa0:                   00000004 005c3fb8 00000001 005c3fb8 00000004 00000001
dfc0: 00000004 005c3fb8 b6f6bba0 00000004 00000004 0059edb8 00000000 00000000
dfe0: 00000004 bed918f0 b6f09bd3 b6e89a66

Cc: <stable@vger.kernel.org> # v6.0+
Fixes: 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state")
Fixes: fba863b81604 ("net: phy: make PHY PM ops a no-op if MAC driver manages PHY PM")
Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: ethernet: ti: cpsw_new: enable mac_managed_pm to fix mdio

The below commit  introduced a WARN when phy state is not in the states:
PHY_HALTED, PHY_READY and PHY_UP.
commit 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state")

When cpsw_new resumes, there have port in PHY_NOLINK state, so the below
warning comes out. Set mac_managed_pm be true to tell mdio that the phy
resume/suspend is managed by the mac, to fix the following warning:

WARNING: CPU: 0 PID: 965 at drivers/net/phy/phy_device.c:326 mdio_bus_phy_resume+0x140/0x144
CPU: 0 PID: 965 Comm: sh Tainted: G           O       6.1.46-g247b2535b2 #1
Hardware name: Generic AM33XX (Flattened Device Tree)
unwind_backtrace from show_stack+0x18/0x1c
show_stack from dump_stack_lvl+0x24/0x2c
dump_stack_lvl from __warn+0x84/0x15c
__warn from warn_slowpath_fmt+0x1a8/0x1c8
warn_slowpath_fmt from mdio_bus_phy_resume+0x140/0x144
mdio_bus_phy_resume from dpm_run_callback+0x3c/0x140
dpm_run_callback from device_resume+0xb8/0x2b8
device_resume from dpm_resume+0x144/0x314
dpm_resume from dpm_resume_end+0x14/0x20
dpm_resume_end from suspend_devices_and_enter+0xd0/0x924
suspend_devices_and_enter from pm_suspend+0x2e0/0x33c
pm_suspend from state_store+0x74/0xd0
state_store from kernfs_fop_write_iter+0x104/0x1ec
kernfs_fop_write_iter from vfs_write+0x1b8/0x358
vfs_write from ksys_write+0x78/0xf8
ksys_write from ret_fast_syscall+0x0/0x54
Exception stack(0xe094dfa8 to 0xe094dff0)
dfa0:                   00000004 005c3fb8 00000001 005c3fb8 00000004 00000001
dfc0: 00000004 005c3fb8 b6f6bba0 00000004 00000004 0059edb8 00000000 00000000
dfe0: 00000004 bed918f0 b6f09bd3 b6e89a66

Cc: <stable@vger.kernel.org> # v6.0+
Fixes: 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state")
Fixes: fba863b81604 ("net: phy: make PHY PM ops a no-op if MAC driver manages PHY PM")
Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

netfilter: nft_set_pipapo: remove static in nft_pipapo_get()

This has slipped through when reducing memory footprint for set
elements, remove it.

Fixes: 9dad402b89e8 ("netfilter: nf_tables: expose opaque set element as struct nft_elem_priv")
Reported-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Merge tag 'v6.8-p3' of git://git./linux/kernel/git/herbert/crypto-2.6

Pull crypto fixes from Herbert Xu:
"Fix regressions in cbc and algif_hash, as well as an older
  NULL-pointer dereference in ccp"

* tag 'v6.8-p3' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: algif_hash - Remove bogus SGL free on zero-length error path
  crypto: cbc - Ensure statesize is zero
  crypto: ccp - Fix null pointer dereference in __sev_platform_shutdown_locked

Merge tag 'percpu-for-6.8-rc4' of git://git./linux/kernel/git/dennis/percpu

Pull percpu fix from Dennis Zhou:

- fix riscv wrong size passed to local_flush_tlb_range_asid()

* tag 'percpu-for-6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
riscv: Fix wrong size passed to local_flush_tlb_range_asid()

netfilter: nft_compat: restrict match/target protocol to u16

xt_check_{match,target} expects u16, but NFTA_RULE_COMPAT_PROTO is u32.

NLA_POLICY_MAX(NLA_BE32, 65535) cannot be used because .max in
nla_policy is s16, see 3e48be05f3c7 ("netlink: add attribute range
validation to policy").

Fixes: 0ca743a55991 ("netfilter: nf_tables: add compatibility layer for x_tables")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nft_compat: reject unused compat flag

Flag (1 << 0) is ignored is set, never used, reject it it with EINVAL
instead.

Fixes: 0ca743a55991 ("netfilter: nf_tables: add compatibility layer for x_tables")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nft_compat: narrow down revision to unsigned 8-bits

xt_find_revision() expects u8, restrict it to this datatype.

Fixes: 0ca743a55991 ("netfilter: nf_tables: add compatibility layer for x_tables")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Merge tag 'wireless-2024-02-06' of git://git./linux/kernel/git/wireless/wireless

Kalle Valo says:

====================
wireless fixes for v6.8-rc4

This time we have unusually large wireless pull request. Several
functionality fixes to both stack and iwlwifi. Lots of fixes to
warnings, especially to MODULE_DESCRIPTION().

* tag 'wireless-2024-02-06' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: (31 commits)
  wifi: mt76: mt7996: fix fortify warning
  wifi: brcmfmac: Adjust n_channels usage for __counted_by
  wifi: iwlwifi: do not announce EPCS support
  wifi: iwlwifi: exit eSR only after the FW does
  wifi: iwlwifi: mvm: fix a battery life regression
  wifi: mac80211: accept broadcast probe responses on 6 GHz
  wifi: mac80211: adding missing drv_mgd_complete_tx() call
  wifi: mac80211: fix waiting for beacons logic
  wifi: mac80211: fix unsolicited broadcast probe config
  wifi: mac80211: initialize SMPS mode correctly
  wifi: mac80211: fix driver debugfs for vif type change
  wifi: mac80211: set station RX-NSS on reconfig
  wifi: mac80211: fix RCU use in TDLS fast-xmit
  wifi: mac80211: improve CSA/ECSA connection refusal
  wifi: cfg80211: detect stuck ECSA element in probe resp
  wifi: iwlwifi: remove extra kernel-doc
  wifi: fill in MODULE_DESCRIPTION()s for mt76 drivers
  wifi: fill in MODULE_DESCRIPTION()s for wilc1000
  wifi: fill in MODULE_DESCRIPTION()s for wl18xx
  wifi: fill in MODULE_DESCRIPTION()s for p54spi
  ...
====================

Link: https://lore.kernel.org/r/20240206095722.CD9D2C433F1@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'loongarch-fixes-6.8-2' of git://git./linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch fixes from Huacai Chen:
"Fix acpi_core_pic[] array overflow, fix earlycon parameter if KASAN
  enabled, disable UBSAN instrumentation for vDSO build, and two Kconfig
  cleanups"

* tag 'loongarch-fixes-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  LoongArch: vDSO: Disable UBSAN instrumentation
  LoongArch: Fix earlycon parameter if KASAN enabled
  LoongArch: Change acpi_core_pic[NR_CPUS] to acpi_core_pic[MAX_CORE_PIC]
  LoongArch: Select HAVE_ARCH_SECCOMP to use the common SECCOMP menu
  LoongArch: Select ARCH_ENABLE_THP_MIGRATION instead of redefining it

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull kvm fixes from Paolo Bonzini:
"x86 guest:

   - Avoid false positive for check that only matters on AMD processors

  x86:

   - Give a hint when Win2016 might fail to boot due to XSAVES &&
     !XSAVEC configuration

   - Do not allow creating an in-kernel PIT unless an IOAPIC already
     exists

  RISC-V:

   - Allow ISA extensions that were enabled for bare metal in 6.8 (Zbc,
     scalar and vector crypto, Zfh[min], Zihintntl, Zvfh[min], Zfa)

  S390:

   - fix CC for successful PQAP instruction

   - fix a race when creating a shadow page"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  x86/coco: Define cc_vendor without CONFIG_ARCH_HAS_CC_PLATFORM
  x86/kvm: Fix SEV check in sev_map_percpu_data()
  KVM: x86: Give a hint when Win2016 might fail to boot due to XSAVES erratum
  KVM: x86: Check irqchip mode before create PIT
  KVM: riscv: selftests: Add Zfa extension to get-reg-list test
  RISC-V: KVM: Allow Zfa extension for Guest/VM
  KVM: riscv: selftests: Add Zvfh[min] extensions to get-reg-list test
  RISC-V: KVM: Allow Zvfh[min] extensions for Guest/VM
  KVM: riscv: selftests: Add Zihintntl extension to get-reg-list test
  RISC-V: KVM: Allow Zihintntl extension for Guest/VM
  KVM: riscv: selftests: Add Zfh[min] extensions to get-reg-list test
  RISC-V: KVM: Allow Zfh[min] extensions for Guest/VM
  KVM: riscv: selftests: Add vector crypto extensions to get-reg-list test
  RISC-V: KVM: Allow vector crypto extensions for Guest/VM
  KVM: riscv: selftests: Add scaler crypto extensions to get-reg-list test
  RISC-V: KVM: Allow scalar crypto extensions for Guest/VM
  KVM: riscv: selftests: Add Zbc extension to get-reg-list test
  RISC-V: KVM: Allow Zbc extension for Guest/VM
  KVM: s390: fix cc for successful PQAP
  KVM: s390: vsie: fix race during shadow creation

Merge tag 'nfsd-6.8-3' of git://git./linux/kernel/git/cel/linux

Pull nfsd fix from Chuck Lever:

- Address a deadlock regression in RELEASE_LOCKOWNER

* tag 'nfsd-6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: don't take fi_lock in nfsd_break_deleg_cb()

net: intel: fix old compiler regressions

The kernel build regressions/improvements email contained a couple of
issues with old compilers (in fact all the reports were on different
architectures, but all gcc 5.5) and the FIELD_PREP() and FIELD_GET()
conversions. They're all because an integer #define that should have
been declared as unsigned, was shifted to the point that it could set
the sign bit.

The fix just involves making sure the defines use the "U" identifier on
the constants to make sure they're unsigned. Should make the checkers
happier.

Confirmed with objdump before/after that there is no change to the
binaries.

Issues were reported as follows:
./drivers/net/ethernet/intel/ice/ice_base.c:238:7: note: in expansion of macro 'FIELD_GET'
      (FIELD_GET(GLINT_CTL_ITR_GRAN_25_M, regval) == ICE_ITR_GRAN_US))
       ^
./include/linux/compiler_types.h:435:38: error: call to '__compiletime_assert_1093' declared with attribute error: FIELD_GET: mask is not constant
drivers/net/ethernet/intel/ice/ice_nvm.c:709:16: note: in expansion of macro ‘FIELD_GET’
  orom->major = FIELD_GET(ICE_OROM_VER_MASK, combo_ver);
                ^
./include/linux/compiler_types.h:435:38: error: call to ‘__compiletime_assert_796’ declared with attribute error: FIELD_GET: mask is not constant
drivers/net/ethernet/intel/ice/ice_common.c:945:18: note: in expansion of macro ‘FIELD_GET’
  u8 max_agg_bw = FIELD_GET(GL_PWR_MODE_CTL_CAR_MAX_BW_M,
                  ^
./include/linux/compiler_types.h:435:38: error: call to ‘__compiletime_assert_420’ declared with attribute error: FIELD_GET: mask is not constant
drivers/net/ethernet/intel/i40e/i40e_dcb.c:458:8: note: in expansion of macro ‘FIELD_GET’
  oui = FIELD_GET(I40E_LLDP_TLV_OUI_MASK, ouisubtype);
        ^

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/lkml/d03e90ca-8485-4d1b-5ec1-c3398e0e8da@linux-m68k.org/ #i40e #ice
Fixes: 62589808d73b ("i40e: field get conversion")
Fixes: 5a259f8e0baf ("ice: field get conversion")
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Link: https://lore.kernel.org/r/20240206022906.2194214-1-jesse.brandeburg@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

MAINTAINERS: Maintainer change for rds

At this point, Santosh has moved onto other things and I am happy
to take over the role of rds maintainer. Update the MAINTAINERS
accordingly.

Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://lore.kernel.org/r/20240205190343.112436-1-allison.henderson@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: cmsg_ipv6: repeat the exact packet

cmsg_ipv6 test requests tcpdump to capture 4 packets,
and sends until tcpdump quits. Only the first packet
is "real", however, and the rest are basic UDP packets.
So if tcpdump doesn't start in time it will miss
the real packet and only capture the UDP ones.

This makes the test fail on slow machine (no KVM or with
debug enabled) 100% of the time, while it passes in fast
environments.

Repeat the "real" / expected packet.

Fixes: 9657ad09e1fa ("selftests: net: test IPV6_TCLASS")
Fixes: 05ae83d5a4a2 ("selftests: net: test IPV6_HOPLIMIT")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: stmmac: protect updates of 64-bit statistics counters

As explained by a comment in <linux/u64_stats_sync.h>, write side of struct
u64_stats_sync must ensure mutual exclusion, or one seqcount update could
be lost on 32-bit platforms, thus blocking readers forever. Such lockups
have been observed in real world after stmmac_xmit() on one CPU raced with
stmmac_napi_poll_tx() on another CPU.

To fix the issue without introducing a new lock, split the statics into
three parts:

1. fields updated only under the tx queue lock,
2. fields updated only during NAPI poll,
3. fields updated only from interrupt context,

Updates to fields in the first two groups are already serialized through
other locks. It is sufficient to split the existing struct u64_stats_sync
so that each group has its own.

Note that tx_set_ic_bit is updated from both contexts. Split this counter
so that each context gets its own, and calculate their sum to get the total
value in stmmac_get_ethtool_stats().

For the third group, multiple interrupts may be processed by different CPUs
at the same time, but interrupts on the same CPU will not nest. Move fields
from this group to a newly created per-cpu struct stmmac_pcpu_stats.

Fixes: 133466c3bbe1 ("net: stmmac: use per-queue 64 bit statistics where necessary")
Link: https://lore.kernel.org/netdev/Za173PhviYg-1qIn@torres.zugschlus.de/t/
Cc: stable@vger.kernel.org
Signed-off-by: Petr Tesarik <petr@tesarici.cz>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'for-6.8-rc3-tag' of git://git./linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:

- two fixes preventing deletion and manual creation of subvolume qgroup

- unify error code returned for unknown send flags

- fix assertion during subvolume creation when anonymous device could
   be allocated by other thread (e.g. due to backref walk)

* tag 'for-6.8-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: do not ASSERT() if the newly created subvolume already got read
  btrfs: forbid deleting live subvol qgroup
  btrfs: forbid creating subvol qgroups
  btrfs: send: return EOPNOTSUPP on unknown flags

ppp_async: limit MRU to 64K

syzbot triggered a warning [1] in __alloc_pages():

WARN_ON_ONCE_GFP(order > MAX_PAGE_ORDER, gfp)

Willem fixed a similar issue in commit c0a2a1b0d631 ("ppp: limit MRU to 64K")

Adopt the same sanity check for ppp_async_ioctl(PPPIOCSMRU)

[1]:

WARNING: CPU: 1 PID: 11 at mm/page_alloc.c:4543 __alloc_pages+0x308/0x698 mm/page_alloc.c:4543
Modules linked in:
CPU: 1 PID: 11 Comm: kworker/u4:0 Not tainted 6.8.0-rc2-syzkaller-g41bccc98fb79 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023
Workqueue: events_unbound flush_to_ldisc
pstate: 204000c5 (nzCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __alloc_pages+0x308/0x698 mm/page_alloc.c:4543
lr : __alloc_pages+0xc8/0x698 mm/page_alloc.c:4537
sp : ffff800093967580
x29: ffff800093967660 x28: ffff8000939675a0 x27: dfff800000000000
x26: ffff70001272ceb4 x25: 0000000000000000 x24: ffff8000939675c0
x23: 0000000000000000 x22: 0000000000060820 x21: 1ffff0001272ceb8
x20: ffff8000939675e0 x19: 0000000000000010 x18: ffff800093967120
x17: ffff800083bded5c x16: ffff80008ac97500 x15: 0000000000000005
x14: 1ffff0001272cebc x13: 0000000000000000 x12: 0000000000000000
x11: ffff70001272cec1 x10: 1ffff0001272cec0 x9 : 0000000000000001
x8 : ffff800091c91000 x7 : 0000000000000000 x6 : 000000000000003f
x5 : 00000000ffffffff x4 : 0000000000000000 x3 : 0000000000000020
x2 : 0000000000000008 x1 : 0000000000000000 x0 : ffff8000939675e0
Call trace:
  __alloc_pages+0x308/0x698 mm/page_alloc.c:4543
  __alloc_pages_node include/linux/gfp.h:238 [inline]
  alloc_pages_node include/linux/gfp.h:261 [inline]
  __kmalloc_large_node+0xbc/0x1fc mm/slub.c:3926
  __do_kmalloc_node mm/slub.c:3969 [inline]
  __kmalloc_node_track_caller+0x418/0x620 mm/slub.c:4001
  kmalloc_reserve+0x17c/0x23c net/core/skbuff.c:590
  __alloc_skb+0x1c8/0x3d8 net/core/skbuff.c:651
  __netdev_alloc_skb+0xb8/0x3e8 net/core/skbuff.c:715
  netdev_alloc_skb include/linux/skbuff.h:3235 [inline]
  dev_alloc_skb include/linux/skbuff.h:3248 [inline]
  ppp_async_input drivers/net/ppp/ppp_async.c:863 [inline]
  ppp_asynctty_receive+0x588/0x186c drivers/net/ppp/ppp_async.c:341
  tty_ldisc_receive_buf+0x12c/0x15c drivers/tty/tty_buffer.c:390
  tty_port_default_receive_buf+0x74/0xac drivers/tty/tty_port.c:37
  receive_buf drivers/tty/tty_buffer.c:444 [inline]
  flush_to_ldisc+0x284/0x6e4 drivers/tty/tty_buffer.c:494
  process_one_work+0x694/0x1204 kernel/workqueue.c:2633
  process_scheduled_works kernel/workqueue.c:2706 [inline]
  worker_thread+0x938/0xef4 kernel/workqueue.c:2787
  kthread+0x288/0x310 kernel/kthread.c:388
  ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:860

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-and-tested-by: syzbot+c5da1f087c9e4ec6c933@syzkaller.appspotmail.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240205171004.1059724-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

devlink: avoid potential loop in devlink_rel_nested_in_notify_work()

In case devlink_rel_nested_in_notify_work() can not take the devlink
lock mutex. Convert the work to delayed work and in case of reschedule
do it jiffie later and avoid potential looping.

Suggested-by: Paolo Abeni <pabeni@redhat.com>
Fixes: c137743bce02 ("devlink: introduce object and nested devlink relationship infra")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240205171114.338679-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

af_unix: Call kfree_skb() for dead unix_(sk)->oob_skb in GC.

syzbot reported a warning [0] in __unix_gc() with a repro, which
creates a socketpair and sends one socket's fd to itself using the
peer.

  socketpair(AF_UNIX, SOCK_STREAM, 0, [3, 4]) = 0
  sendmsg(4, {msg_name=NULL, msg_namelen=0, msg_iov=[{iov_base="\360", iov_len=1}],
          msg_iovlen=1, msg_control=[{cmsg_len=20, cmsg_level=SOL_SOCKET,
                                      cmsg_type=SCM_RIGHTS, cmsg_data=[3]}],
          msg_controllen=24, msg_flags=0}, MSG_OOB|MSG_PROBE|MSG_DONTWAIT|MSG_ZEROCOPY) = 1

This forms a self-cyclic reference that GC should finally untangle
but does not due to lack of MSG_OOB handling, resulting in memory
leak.

Recently, commit 11498715f266 ("af_unix: Remove io_uring code for
GC.") removed io_uring's dead code in GC and revealed the problem.

The code was executed at the final stage of GC and unconditionally
moved all GC candidates from gc_candidates to gc_inflight_list.
That papered over the reported problem by always making the following
WARN_ON_ONCE(!list_empty(&gc_candidates)) false.

The problem has been there since commit 2aab4b969002 ("af_unix: fix
struct pid leaks in OOB support") added full scm support for MSG_OOB
while fixing another bug.

To fix this problem, we must call kfree_skb() for unix_sk(sk)->oob_skb
if the socket still exists in gc_candidates after purging collected skb.

Then, we need to set NULL to oob_skb before calling kfree_skb() because
it calls last fput() and triggers unix_release_sock(), where we call
duplicate kfree_skb(u->oob_skb) if not NULL.

Note that the leaked socket remained being linked to a global list, so
kmemleak also could not detect it.  We need to check /proc/net/protocol
to notice the unfreed socket.

[0]:
WARNING: CPU: 0 PID: 2863 at net/unix/garbage.c:345 __unix_gc+0xc74/0xe80 net/unix/garbage.c:345
Modules linked in:
CPU: 0 PID: 2863 Comm: kworker/u4:11 Not tainted 6.8.0-rc1-syzkaller-00583-g1701940b1a02 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024
Workqueue: events_unbound __unix_gc
RIP: 0010:__unix_gc+0xc74/0xe80 net/unix/garbage.c:345
Code: 8b 5c 24 50 e9 86 f8 ff ff e8 f8 e4 22 f8 31 d2 48 c7 c6 30 6a 69 89 4c 89 ef e8 97 ef ff ff e9 80 f9 ff ff e8 dd e4 22 f8 90 <0f> 0b 90 e9 7b fd ff ff 48 89 df e8 5c e7 7c f8 e9 d3 f8 ff ff e8
RSP: 0018:ffffc9000b03fba0 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffffc9000b03fc10 RCX: ffffffff816c493e
RDX: ffff88802c02d940 RSI: ffffffff896982f3 RDI: ffffc9000b03fb30
RBP: ffffc9000b03fce0 R08: 0000000000000001 R09: fffff52001607f66
R10: 0000000000000003 R11: 0000000000000002 R12: dffffc0000000000
R13: ffffc9000b03fc10 R14: ffffc9000b03fc10 R15: 0000000000000001
FS:  0000000000000000(0000) GS:ffff8880b9400000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005559c8677a60 CR3: 000000000d57a000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
process_one_work+0x889/0x15e0 kernel/workqueue.c:2633
process_scheduled_works kernel/workqueue.c:2706 [inline]
worker_thread+0x8b9/0x12a0 kernel/workqueue.c:2787
kthread+0x2c6/0x3b0 kernel/kthread.c:388
ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:242
</TASK>

Reported-by: syzbot+fa3ef895554bdbfd1183@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=fa3ef895554bdbfd1183
Fixes: 2aab4b969002 ("af_unix: fix struct pid leaks in OOB support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240203183149.63573-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: stmmac: xgmac: fix a typo of register name in DPP safety handling

DDPP is copied from Synopsys Data book:

DDPP: Disable Data path Parity Protection.
When it is 0x0, Data path Parity Protection is enabled.
When it is 0x1, Data path Parity Protection is disabled.

The macro name should be XGMAC_DPP_DISABLE.

Fixes: 46eba193d04f ("net: stmmac: xgmac: fix handling of DPP safety error for DMA channels")
Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20240203053133.1129236-1-0x1207@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

selftests/net: Amend per-netns counter checks

Selftests here check not only that connect()/accept() for
TCP-AO/TCP-MD5/non-signed-TCP combinations do/don't establish
connections, but also counters: those are per-AO-key, per-socket and
per-netns.

The counters are checked on the server's side, as the server listener
has TCP-AO/TCP-MD5/no keys for different peers. All tests run in
the same namespaces with the same veth pair, created in test_init().

After close() in both client and server, the sides go through
the regular FIN/ACK + FIN/ACK sequence, which goes in the background.
If the selftest has already started a new testing scenario, read
per-netns counters - it may fail in the end iff it doesn't expect
the TCPAOGood per-netns counters go up during the test.

Let's just kill both TCP-AO sides - that will avoid any asynchronous
background TCP-AO segments going to either sides.

Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/all/20240201132153.4d68f45e@kernel.org/T/#u
Fixes: 6f0c472a6815 ("selftests/net: Add TCP-AO + TCP-MD5 + no sign listen socket tests")
Signed-off-by: Dmitry Safonov <dima@arista.com>
Link: https://lore.kernel.org/r/20240202-unsigned-md5-netns-counters-v1-1-8b90c37c0566@arista.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

x86/coco: Define cc_vendor without CONFIG_ARCH_HAS_CC_PLATFORM

After commit a9ef277488cf ("x86/kvm: Fix SEV check in
sev_map_percpu_data()"), there is a build error when building
x86_64_defconfig with GCOV using LLVM:

  ld.lld: error: undefined symbol: cc_vendor
  >>> referenced by kvm.c
  >>>               arch/x86/kernel/kvm.o:(kvm_smp_prepare_boot_cpu) in archive vmlinux.a

which corresponds to

  if (cc_vendor != CC_VENDOR_AMD ||
      !cc_platform_has(CC_ATTR_GUEST_MEM_ENCRYPT))
            return;

Without GCOV, clang is able to eliminate the use of cc_vendor because
cc_platform_has() evaluates to false when CONFIG_ARCH_HAS_CC_PLATFORM is
not set, meaning that if statement will be true no matter what value
cc_vendor has.

With GCOV, the instrumentation keeps the use of cc_vendor around for
code coverage purposes but cc_vendor is only declared, not defined,
without CONFIG_ARCH_HAS_CC_PLATFORM, leading to the build error above.

Provide a macro definition of cc_vendor when CONFIG_ARCH_HAS_CC_PLATFORM
is not set with a value of CC_VENDOR_NONE, so that the first condition
can always be evaluated/eliminated at compile time, avoiding the build
error altogether. This is very similar to the situation prior to
commit da86eb961184 ("x86/coco: Get rid of accessor functions").

Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Message-Id: <20240202-provide-cc_vendor-without-arch_has_cc_platform-v1-1-09ad5f2a3099@kernel.org>
Fixes: a9ef277488cf ("x86/kvm: Fix SEV check in sev_map_percpu_data()", 2024-01-31)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

tipc: Check the bearer type before calling tipc_udp_nl_bearer_add()

syzbot reported the following general protection fault [1]:

general protection fault, probably for non-canonical address 0xdffffc0000000010: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000080-0x0000000000000087]
...
RIP: 0010:tipc_udp_is_known_peer+0x9c/0x250 net/tipc/udp_media.c:291
...
Call Trace:
<TASK>
tipc_udp_nl_bearer_add+0x212/0x2f0 net/tipc/udp_media.c:646
tipc_nl_bearer_add+0x21e/0x360 net/tipc/bearer.c:1089
genl_family_rcv_msg_doit+0x1fc/0x2e0 net/netlink/genetlink.c:972
genl_family_rcv_msg net/netlink/genetlink.c:1052 [inline]
genl_rcv_msg+0x561/0x800 net/netlink/genetlink.c:1067
netlink_rcv_skb+0x16b/0x440 net/netlink/af_netlink.c:2544
genl_rcv+0x28/0x40 net/netlink/genetlink.c:1076
netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline]
netlink_unicast+0x53b/0x810 net/netlink/af_netlink.c:1367
netlink_sendmsg+0x8b7/0xd70 net/netlink/af_netlink.c:1909
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0xd5/0x180 net/socket.c:745
____sys_sendmsg+0x6ac/0x940 net/socket.c:2584
___sys_sendmsg+0x135/0x1d0 net/socket.c:2638
__sys_sendmsg+0x117/0x1e0 net/socket.c:2667
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x40/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b

The cause of this issue is that when tipc_nl_bearer_add() is called with
the TIPC_NLA_BEARER_UDP_OPTS attribute, tipc_udp_nl_bearer_add() is called
even if the bearer is not UDP.

tipc_udp_is_known_peer() called by tipc_udp_nl_bearer_add() assumes that
the media_ptr field of the tipc_bearer has an udp_bearer type object, so
the function goes crazy for non-UDP bearers.

This patch fixes the issue by checking the bearer type before calling
tipc_udp_nl_bearer_add() in tipc_nl_bearer_add().

Fixes: ef20cd4dd163 ("tipc: introduce UDP replicast")
Reported-and-tested-by: syzbot+5142b87a9abc510e14fa@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=5142b87a9abc510e14fa [1]
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Link: https://lore.kernel.org/r/20240131152310.4089541-1-syoshida@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge tag 'bcachefs-2024-02-05' of https://evilpiepirate.org/git/bcachefs

Pull bcachefs fixes from Kent Overstreet:
"Two serious ones here that we'll want to backport to stable: a fix for
  a race in the thread_with_file code, and another locking fixup in the
  subvolume deletion path"

* tag 'bcachefs-2024-02-05' of https://evilpiepirate.org/git/bcachefs:
  bcachefs: time_stats: Check for last_event == 0 when updating freq stats
  bcachefs: install fd later to avoid race with close
  bcachefs: unlock parent dir if entry is not found in subvolume deletion
  bcachefs: Fix build on parisc by avoiding __multi3()

LoongArch: vDSO: Disable UBSAN instrumentation

The vDSO executes in userspace, so the kernel's UBSAN should not
instrument it. Solves these kind of build errors:

loongarch64-linux-ld: arch/loongarch/vdso/vgettimeofday.o: in function `vdso_shift_ns':
lib/vdso/gettimeofday.c:23:(.text+0x3f8): undefined reference to `__ubsan_handle_shift_out_of_bounds'

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202401310530.lZHCj1Zl-lkp@intel.com/
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Fangrui Song <maskray@google.com>
Cc: loongarch@lists.linux.dev
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

LoongArch: Fix earlycon parameter if KASAN enabled

The earlycon parameter is based on fixmap, and fixmap addresses are not
supposed to be shadowed by KASAN. So return the kasan_early_shadow_page
in kasan_mem_to_shadow() if the input address is above FIXADDR_START.
Otherwise earlycon cannot work after kasan_init().

Cc: stable@vger.kernel.org
Fixes: 5aa4ac64e6add3e ("LoongArch: Add KASAN (Kernel Address Sanitizer) support")
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

LoongArch: Change acpi_core_pic[NR_CPUS] to acpi_core_pic[MAX_CORE_PIC]

With default config, the value of NR_CPUS is 64. When HW platform has
more then 64 cpus, system will crash on these platforms. MAX_CORE_PIC
is the maximum cpu number in MADT table (max physical number) which can
exceed the supported maximum cpu number (NR_CPUS, max logical number),
but kernel should not crash. Kernel should boot cpus with NR_CPUS, let
the remainder cpus stay in BIOS.

The potential crash reason is that the array acpi_core_pic[NR_CPUS] can
be overflowed when parsing MADT table, and it is obvious that CORE_PIC
should be corresponding to physical core rather than logical core, so it
is better to define the array as acpi_core_pic[MAX_CORE_PIC].

With the patch, system can boot up 64 vcpus with qemu parameter -smp 128,
otherwise system will crash with the following message.

[    0.000000] CPU 0 Unable to handle kernel paging request at virtual address 0000420000004259, era == 90000000037a5f0c, ra == 90000000037a46ec
[    0.000000] Oops[#1]:
[    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.8.0-rc2+ #192
[    0.000000] Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022
[    0.000000] pc 90000000037a5f0c ra 90000000037a46ec tp 9000000003c90000 sp 9000000003c93d60
[    0.000000] a0 0000000000000019 a1 9000000003d93bc0 a2 0000000000000000 a3 9000000003c93bd8
[    0.000000] a4 9000000003c93a74 a5 9000000083c93a67 a6 9000000003c938f0 a7 0000000000000005
[    0.000000] t0 0000420000004201 t1 0000000000000000 t2 0000000000000001 t3 0000000000000001
[    0.000000] t4 0000000000000003 t5 0000000000000000 t6 0000000000000030 t7 0000000000000063
[    0.000000] t8 0000000000000014 u0 ffffffffffffffff s9 0000000000000000 s0 9000000003caee98
[    0.000000] s1 90000000041b0480 s2 9000000003c93da0 s3 9000000003c93d98 s4 9000000003c93d90
[    0.000000] s5 9000000003caa000 s6 000000000a7fd000 s7 000000000f556b60 s8 000000000e0a4330
[    0.000000]    ra: 90000000037a46ec platform_init+0x214/0x250
[    0.000000]   ERA: 90000000037a5f0c efi_runtime_init+0x30/0x94
[    0.000000]  CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
[    0.000000]  PRMD: 00000000 (PPLV0 -PIE -PWE)
[    0.000000]  EUEN: 00000000 (-FPE -SXE -ASXE -BTE)
[    0.000000]  ECFG: 00070800 (LIE=11 VS=7)
[    0.000000] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0)
[    0.000000]  BADV: 0000420000004259
[    0.000000]  PRID: 0014c010 (Loongson-64bit, Loongson-3A5000)
[    0.000000] Modules linked in:
[    0.000000] Process swapper (pid: 0, threadinfo=(____ptrval____), task=(____ptrval____))
[    0.000000] Stack : 9000000003c93a14 9000000003800898 90000000041844f8 90000000037a46ec
[    0.000000]         000000000a7fd000 0000000008290000 0000000000000000 0000000000000000
[    0.000000]         0000000000000000 0000000000000000 00000000019d8000 000000000f556b60
[    0.000000]         000000000a7fd000 000000000f556b08 9000000003ca7700 9000000003800000
[    0.000000]         9000000003c93e50 9000000003800898 9000000003800108 90000000037a484c
[    0.000000]         000000000e0a4330 000000000f556b60 000000000a7fd000 000000000f556b08
[    0.000000]         9000000003ca7700 9000000004184000 0000000000200000 000000000e02b018
[    0.000000]         000000000a7fd000 90000000037a0790 9000000003800108 0000000000000000
[    0.000000]         0000000000000000 000000000e0a4330 000000000f556b60 000000000a7fd000
[    0.000000]         000000000f556b08 000000000eaae298 000000000eaa5040 0000000000200000
[    0.000000]         ...
[    0.000000] Call Trace:
[    0.000000] [<90000000037a5f0c>] efi_runtime_init+0x30/0x94
[    0.000000] [<90000000037a46ec>] platform_init+0x214/0x250
[    0.000000] [<90000000037a484c>] setup_arch+0x124/0x45c
[    0.000000] [<90000000037a0790>] start_kernel+0x90/0x670
[    0.000000] [<900000000378b0d8>] kernel_entry+0xd8/0xdc

Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

LoongArch: Select HAVE_ARCH_SECCOMP to use the common SECCOMP menu

LoongArch missed the refactoring made by commit 282a181b1a0d ("seccomp:
Move config option SECCOMP to arch/Kconfig") because LoongArch was not
mainlined at that time.

The 'depends on PROC_FS' statement is stale as described in that commit.
Select HAVE_ARCH_SECCOMP, and remove the duplicated config entry.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

LoongArch: Select ARCH_ENABLE_THP_MIGRATION instead of redefining it

ARCH_ENABLE_THP_MIGRATION is supposed to be selected by arch Kconfig.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

wifi: mt76: mt7996: fix fortify warning

Copy cck and ofdm separately in order to avoid __read_overflow2_field
warning.

Fixes: f75e4779d215 ("wifi: mt76: mt7996: add txpower setting support")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240203132446.54790-1-nbd@nbd.name

nfsd: don't take fi_lock in nfsd_break_deleg_cb()

A recent change to check_for_locks() changed it to take ->flc_lock while
holding ->fi_lock.  This creates a lock inversion (reported by lockdep)
because there is a case where ->fi_lock is taken while holding
->flc_lock.

->flc_lock is held across ->fl_lmops callbacks, and
nfsd_break_deleg_cb() is one of those and does take ->fi_lock.  However
it doesn't need to.

Prior to v4.17-rc1~110^2~22 ("nfsd: create a separate lease for each
delegation") nfsd_break_deleg_cb() would walk the ->fi_delegations list
and so needed the lock.  Since then it doesn't walk the list and doesn't
need the lock.

Two actions are performed under the lock.  One is to call
nfsd_break_one_deleg which calls nfsd4_run_cb().  These doesn't act on
the nfs4_file at all, so don't need the lock.

The other is to set ->fi_had_conflict which is in the nfs4_file.
This field is only ever set here (except when initialised to false)
so there is no possible problem will multiple threads racing when
setting it.

The field is tested twice in nfs4_set_delegation().  The first test does
not hold a lock and is documented as an opportunistic optimisation, so
it doesn't impose any need to hold ->fi_lock while setting
->fi_had_conflict.

The second test in nfs4_set_delegation() *is* make under ->fi_lock, so
removing the locking when ->fi_had_conflict is set could make a change.
The change could only be interesting if ->fi_had_conflict tested as
false even though nfsd_break_one_deleg() ran before ->fi_lock was
unlocked.  i.e. while hash_delegation_locked() was running.
As hash_delegation_lock() doesn't interact in any way with nfs4_run_cb()
there can be no importance to this interaction.

So this patch removes the locking from nfsd_break_one_deleg() and moves
the final test on ->fi_had_conflict out of the locked region to make it
clear that locking isn't important to the test.  It is still tested
*after* vfs_setlease() has succeeded.  This might be significant and as
vfs_setlease() takes ->flc_lock, and nfsd_break_one_deleg() is called
under ->flc_lock this "after" is a true ordering provided by a spinlock.

Fixes: edcf9725150e ("nfsd: fix RELEASE_LOCKOWNER")
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

selftests: net: let big_tcp test cope with slow env

In very slow environments, most big TCP cases including
segmentation and reassembly of big TCP packets have a good
chance to fail: by default the TCP client uses write size
well below 64K. If the host is low enough autocorking is
unable to build real big TCP packets.

Address the issue using much larger write operations.

Note that is hard to observe the issue without an extremely
slow and/or overloaded environment; reduce the TCP transfer
time to allow for much easier/faster reproducibility.

Fixes: 6bb382bcf742 ("selftests: add a selftest for big tcp")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'rxrpc-fixes'

David Howells says:

====================
rxrpc: Miscellaneous fixes

Here some miscellaneous fixes for AF_RXRPC:

(1) The zero serial number has a special meaning in an ACK packet serial
     reference, so skip it when assigning serial numbers to transmitted
     packets.

(2) Don't set the reference serial number in a delayed ACK as the ACK
     cannot be used for RTT calculation.

(3) Don't emit a DUP ACK response to a PING RESPONSE ACK coming back to a
     call that completed in the meantime.

(4) Fix the counting of acks and nacks in ACK packet to better drive
     congestion management.  We want to know if there have been new
     acks/nacks since the last ACK packet, not that there are still
     acks/nacks.  This is more complicated as we have to save the old SACK
     table and compare it.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

rxrpc: Fix counting of new acks and nacks

Fix the counting of new acks and nacks when parsing a packet - something
that is used in congestion control.

As the code stands, it merely notes if there are any nacks whereas what we
really should do is compare the previous SACK table to the new one,
assuming we get two successive ACK packets with nacks in them. However, we
really don't want to do that if we can avoid it as the tables might not
correspond directly as one may be shifted from the other - something that
will only get harder to deal with once extended ACK tables come into full
use (with a capacity of up to 8192).

Instead, count the number of nacks shifted out of the old SACK, the number
of nacks retained in the portion still active and the number of new acks
and nacks in the new table then calculate what we need.

Note this ends up a bit of an estimate as the Rx protocol allows acks to be
withdrawn by the receiver and packets requested to be retransmitted.

Fixes: d57a3a151660 ("rxrpc: Save last ACK's SACK table rather than marking txbufs")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>

rxrpc: Fix response to PING RESPONSE ACKs to a dead call

Stop rxrpc from sending a DUP ACK in response to a PING RESPONSE ACK on a
dead call. We may have initiated the ping but the call may have beaten the
response to completion.

Fixes: 18bfeba50dfd ("rxrpc: Perform terminal call ACK/ABORT retransmission from conn processor")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>

rxrpc: Fix delayed ACKs to not set the reference serial number

Fix the construction of delayed ACKs to not set the reference serial number
as they can't be used as an RTT reference.

Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>

rxrpc: Fix generation of serial numbers to skip zero

In the Rx protocol, every packet generated is marked with a per-connection
monotonically increasing serial number. This number can be referenced in
an ACK packet generated in response to an incoming packet - thereby
allowing the sender to use this for RTT determination, amongst other
things.

However, if the reference field in the ACK is zero, it doesn't refer to any
incoming packet (it could be a ping to find out if a packet got lost, for
example) - so we shouldn't generate zero serial numbers.

Fix the generation of serial numbers to retry if it comes up with a zero.

Furthermore, since the serial numbers are only ever allocated within the
I/O thread this connection is bound to, there's no need for atomics so
remove that too.

Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'nfp-fixes'

Louis Peens says:

====================
nfp: a few simple driver fixes

This is combining a few unrelated one-liner fixes which have been
floating around internally into a single series. I'm not sure what is
the least amount of overhead for reviewers, this or a separate
submission per-patch? I guess it probably depends on personal
preference, but please let me know if there is a strong preference to
rather split these in the future.

Summary:

Patch1: Fixes an old issue which was hidden because 0 just so happens to
be the correct value.
Patch2: Fixes a corner case for flower offloading with bond ports
Patch3: Re-enables the 'NETDEV_XDP_ACT_REDIRECT', which was accidentally
disabled after a previous refactor.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

nfp: enable NETDEV_XDP_ACT_REDIRECT feature flag

Enable previously excluded xdp feature flag for NFD3 devices. This
feature flag is required in order to bind nfp interfaces to an xdp
socket and the nfp driver does in fact support the feature.

Fixes: 66c0e13ad236 ("drivers: net: turn on XDP features")
Cc: stable@vger.kernel.org # 6.3+
Signed-off-by: James Hershaw <james.hershaw@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfp: flower: prevent re-adding mac index for bonded port

When physical ports are reset (either through link failure or manually
toggled down and up again) that are slaved to a Linux bond with a tunnel
endpoint IP address on the bond device, not all tunnel packets arriving
on the bond port are decapped as expected.

The bond dev assigns the same MAC address to itself and each of its
slaves. When toggling a slave device, the same MAC address is therefore
offloaded to the NFP multiple times with different indexes.

The issue only occurs when re-adding the shared mac. The
nfp_tunnel_add_shared_mac() function has a conditional check early on
that checks if a mac entry already exists and if that mac entry is
global: (entry && nfp_tunnel_is_mac_idx_global(entry->index)). In the
case of a bonded device (For example br-ex), the mac index is obtained,
and no new index is assigned.

We therefore modify the conditional in nfp_tunnel_add_shared_mac() to
check if the port belongs to the LAG along with the existing checks to
prevent a new global mac index from being re-assigned to the slave port.

Fixes: 20cce8865098 ("nfp: flower: enable MAC address sharing for offloadable devs")
CC: stable@vger.kernel.org # 5.1+
Signed-off-by: Daniel de Villiers <daniel.devilliers@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfp: use correct macro for LengthSelect in BAR config

The 1st and 2nd expansion BAR configuration registers are configured,
when the driver starts up, in variables 'barcfg_msix_general' and
'barcfg_msix_xpb', respectively. The 'LengthSelect' field is ORed in
from bit 0, which is incorrect. The 'LengthSelect' field should
start from bit 27.

This has largely gone un-noticed because
NFP_PCIE_BAR_PCIE2CPP_LengthSelect_32BIT happens to be 0.

Fixes: 4cb584e0ee7d ("nfp: add CPP access core")
Cc: stable@vger.kernel.org # 4.11+
Signed-off-by: Daniel Basilio <daniel.basilio@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bcachefs: time_stats: Check for last_event == 0 when updating freq stats

This fixes spurious outliers in the frequency stats.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: install fd later to avoid race with close

Calling fd_install() makes a file reachable for userland, including the
possibility to close the file descriptor, which leads to calling its
'release' hook. If that happens before the code had a chance to bump the
reference of the newly created task struct, the release callback will
call put_task_struct() too early, leading to the premature destruction
of the kernel thread.

Avoid that race by calling fd_install() later, after all the setup is
done.

Fixes: 1c6fdbd8f246 ("bcachefs: Initial commit")
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

inet: read sk->sk_family once in inet_recv_error()

inet_recv_error() is called without holding the socket lock.

IPv6 socket could mutate to IPv4 with IPV6_ADDRFORM
socket option and trigger a KCSAN warning.

Fixes: f4713a3dfad0 ("net-timestamp: make tcp_recvmsg call ipv6_recv_error for AF_INET6 socks")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

hv_netvsc: Register VF in netvsc_probe if NET_DEVICE_REGISTER missed

If hv_netvsc driver is unloaded and reloaded, the NET_DEVICE_REGISTER
handler cannot perform VF register successfully as the register call
is received before netvsc_probe is finished. This is because we
register register_netdevice_notifier() very early( even before
vmbus_driver_register()).
To fix this, we try to register each such matching VF( if it is visible
as a netdevice) at the end of netvsc_probe.

Cc: stable@vger.kernel.org
Fixes: 85520856466e ("hv_netvsc: Fix race of register_netdevice_notifier and VF register")
Suggested-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Linux 6.8-rc3

Merge tag 'for-linus-6.8-rc3' of git://git./linux/kernel/git/tytso/ext4

Pull ext4 fixes from Ted Ts'o:
"Miscellaneous bug fixes and cleanups in ext4's multi-block allocator
  and extent handling code"

* tag 'for-linus-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (23 commits)
  ext4: make ext4_set_iomap() recognize IOMAP_DELALLOC map type
  ext4: make ext4_map_blocks() distinguish delalloc only extent
  ext4: add a hole extent entry in cache after punch
  ext4: correct the hole length returned by ext4_map_blocks()
  ext4: convert to exclusive lock while inserting delalloc extents
  ext4: refactor ext4_da_map_blocks()
  ext4: remove 'needed' in trace_ext4_discard_preallocations
  ext4: remove unnecessary parameter "needed" in ext4_discard_preallocations
  ext4: remove unused return value of ext4_mb_release_group_pa
  ext4: remove unused return value of ext4_mb_release_inode_pa
  ext4: remove unused return value of ext4_mb_release
  ext4: remove unused ext4_allocation_context::ac_groups_considered
  ext4: remove unneeded return value of ext4_mb_release_context
  ext4: remove unused parameter ngroup in ext4_mb_choose_next_group_*()
  ext4: remove unused return value of __mb_check_buddy
  ext4: mark the group block bitmap as corrupted before reporting an error
  ext4: avoid allocating blocks from corrupted group in ext4_mb_find_by_goal()
  ext4: avoid allocating blocks from corrupted group in ext4_mb_try_best_found()
  ext4: avoid dividing by 0 in mb_update_avg_fragment_size() when block bitmap corrupt
  ext4: avoid bb_free and bb_fragments inconsistency in mb_free_blocks()
  ...

Merge tag 'v6.8-rc3-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull smb client fixes from Steve French:
"Five smb3 client fixes, mostly multichannel related:

   - four multichannel fixes including fix for channel allocation when
     multiple inactive channels, fix for unneeded race in channel
     deallocation, correct redundant channel scaling, and redundant
     multichannel disabling scenarios

   - add warning if max compound requests reached"

* tag 'v6.8-rc3-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  smb: client: increase number of PDUs allowed in a compound request
  cifs: failure to add channel on iface should bump up weight
  cifs: do not search for channel if server is terminating
  cifs: avoid redundant calls to disable multichannel
  cifs: make sure that channel scaling is done only once

Merge tag 'xfs-6.8-fixes-2' of git://git./fs/xfs/xfs-linux

Pull xfs fixes from Chandan Babu:

- Clear XFS_ATTR_INCOMPLETE filter on removing xattr from a node format
   attribute fork

- Remove conditional compilation of realtime geometry validator
   functions to prevent confusing error messages from being printed on
   the console during the mount operation

* tag 'xfs-6.8-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: remove conditional building of rt geometry validator functions
  xfs: reset XFS_ATTR_INCOMPLETE filter on node removal

Merge tag 'char-misc-6.8-rc3' of git://git./linux/kernel/git/gregkh/char-misc

Pull char/misc driver fixes from Greg KH:
"Here are three tiny driver fixes for 6.8-rc3.  They include:

   - Android binder long-term bug with epoll finally being fixed

   - fastrpc driver shutdown bugfix

   - open-dice lockdep fix

  All of these have been in linux-next this week with no reported
  issues"

* tag 'char-misc-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  binder: signal epoll threads of self-work
  misc: open-dice: Fix spurious lockdep warning
  misc: fastrpc: Mark all sessions as invalid in cb_remove

Merge tag 'tty-6.8-rc3' of git://git./linux/kernel/git/gregkh/tty

Pull tty and serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for 6.8-rc3 that
  resolve a number of reported issues. Included in here are:

   - rs485 flag definition fix that affected the user/kernel abi in -rc1

   - max310x driver fixes

   - 8250_pci1xxxx driver off-by-one fix

   - uart_tiocmget locking race fix

  All of these have been in linux-next for over a week with no reported
  issues"

* tag 'tty-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: max310x: prevent infinite while() loop in port startup
  serial: max310x: fail probe if clock crystal is unstable
  serial: max310x: improve crystal stable clock detection
  serial: max310x: set default value when reading clock ready bit
  serial: core: Fix atomicity violation in uart_tiocmget
  serial: 8250_pci1xxxx: fix off by one in pci1xxxx_process_read_data()
  tty: serial: Fix bit order in RS485 flag definitions

Merge tag 'usb-6.8-rc3' of git://git./linux/kernel/git/gregkh/usb

Pull USB driver fixes from Greg KH:
"Here are a bunch of small USB driver fixes for 6.8-rc3. Included in
  here are:

   - new usb-serial driver ids

   - new dwc3 driver id added

   - typec driver change revert

   - ncm gadget driver endian bugfix

   - xhci bugfixes for a number of reported issues

   - usb hub bugfix for alternate settings

   - ulpi driver debugfs memory leak fix

   - chipidea driver bugfix

   - usb gadget driver fixes

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (24 commits)
  USB: serial: option: add Fibocom FM101-GL variant
  USB: serial: qcserial: add new usb-id for Dell Wireless DW5826e
  USB: serial: cp210x: add ID for IMST iM871A-USB
  usb: typec: tcpm: fix the PD disabled case
  usb: ucsi_acpi: Quirk to ack a connector change ack cmd
  usb: ucsi_acpi: Fix command completion handling
  usb: ucsi: Add missing ppm_lock
  usb: ulpi: Fix debugfs directory leak
  Revert "usb: typec: tcpm: fix cc role at port reset"
  usb: gadget: pch_udc: fix an Excess kernel-doc warning
  usb: f_mass_storage: forbid async queue when shutdown happen
  USB: hub: check for alternate port before enabling A_ALT_HNP_SUPPORT
  usb: chipidea: core: handle power lost in workqueue
  usb: dwc3: gadget: Fix NULL pointer dereference in dwc3_gadget_suspend
  usb: dwc3: pci: add support for the Intel Arrow Lake-H
  usb: core: Prevent null pointer dereference in update_port_device_state
  xhci: handle isoc Babble and Buffer Overrun events properly
  xhci: process isoc TD properly when there was a transaction error mid TD.
  xhci: fix off by one check when adding a secondary interrupter.
  xhci: fix possible null pointer dereference at secondary interrupter removal
  ...

Merge tag 'i2c-for-6.8-rc3' of git://git./linux/kernel/git/wsa/linux

Pull i2c fixlet from Wolfram Sang:
"MAINTAINERS update to point people to the new tree for i2c host driver
changes"

* tag 'i2c-for-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: Update i2c host drivers repository

Merge tag 'dmaengine-fix-6.8' of git://git./linux/kernel/git/vkoul/dmaengine

Pull dmaengine fixes from Vinod Koul:
"Core:

   - fix return value of is_slave_direction() for D2D dma

  Driver fixes for:

   - Documentaion fixes to resolve warnings for at_hdmac driver

   - bunch of fsl driver fixes for memory leaks, and useless kfree

   - TI edma and k3 fixes for packet error and null pointer checks"

* tag 'dmaengine-fix-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
  dmaengine: at_hdmac: add missing kernel-doc style description
  dmaengine: fix is_slave_direction() return false when DMA_DEV_TO_DEV
  dmaengine: fsl-qdma: Remove a useless devm_kfree()
  dmaengine: fsl-qdma: Fix a memory leak related to the queue command DMA
  dmaengine: fsl-qdma: Fix a memory leak related to the status queue DMA
  dmaengine: ti: k3-udma: Report short packet errors
  dmaengine: ti: edma: Add some null pointer checks to the edma_probe
  dmaengine: fsl-dpaa2-qdma: Fix the size of dma pools
  dmaengine: at_hdmac: fix some kernel-doc warnings

Merge tag 'phy-fixes-6.8' of git://git./linux/kernel/git/phy/linux-phy

Pull phy driver fixes from Vinod Koul:

- TI null pointer dereference

- missing erdes mux entry in lan966x driver

- Return of error code in renesas driver

- Serdes init sequence and register offsets for IPQ drivers

* tag 'phy-fixes-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
  phy: ti: phy-omap-usb2: Fix NULL pointer dereference for SRP
  phy: lan966x: Add missing serdes mux entry
  phy: renesas: rcar-gen3-usb2: Fix returning wrong error code
  phy: qcom-qmp-usb: fix serdes init sequence for IPQ6018
  phy: qcom-qmp-usb: fix register offsets for ipq8074/ipq6018

Merge tag 'i2c-host-fixes-6.8-rc3' of git://git./linux/kernel/git/andi.shyti/linux into i2c/for-current

Just a maintenance patch that updates the repository where the
i2c host and muxes related patches will be collected.

Merge tag 'perf-tools-fixes-for-v6.8-1-2024-02-01' of git://git./linux/kernel/git/perf/perf-tools

Pull perf tools fixes from Arnaldo Carvalho de Melo:
"Vendor events:

   - Intel Alderlake/Sapphire Rapids metric fixes, the CPU type
     ("cpu_atom", "cpu_core") needs to be used as a prefix to be
     considered on a metric formula, detected via one of the 'perf test'
     entries.

  'perf test' fixes:

   - Fix the creation of event selector lists on 'perf test' entries, by
     initializing the sample ID flag, which is done by 'perf record', so
     this fix affects only the tests, the common case isn't affected

   - Make 'perf list' respect debug settings (-v) to fix its 'perf test'
     entry

   - Fix 'perf script' test when python support isn't enabled

   - Special case 'perf script' tests on s390, where only DWARF call
     graphs are supported and only on software events

   - Make 'perf daemon' signal test less racy

  Compiler warnings/errors:

   - Remove needless malloc(0) call in 'perf top' that triggers
     -Walloc-size

   - Fix calloc() argument order to address error introduced in gcc-14

  Build:

   - Make minimal shellcheck version to v0.6.0, avoiding the build to
     fail with older versions

  Sync kernel header copies:

   - stat.h to pick STATX_MNT_ID_UNIQUE

   - msr-index.h to pick IA32_MKTME_KEYID_PARTITIONING

   - drm.h to pick DRM_IOCTL_MODE_CLOSEFB

   - unistd.h to pick {list,stat}mount,
     lsm_{[gs]et_self_attr,list_modules} syscall numbers

   - x86 cpufeatures to pick TDX, Zen, APIC MSR fence changes

   - x86's mem{cpy,set}_64.S used in 'perf bench'

   - Also, without tooling effects: asm-generic/unaligned.h, mount.h,
     fcntl.h, kvm headers"

* tag 'perf-tools-fixes-for-v6.8-1-2024-02-01' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (21 commits)
  perf tools headers: update the asm-generic/unaligned.h copy with the kernel sources
  tools include UAPI: Sync linux/mount.h copy with the kernel sources
  perf evlist: Fix evlist__new_default() for > 1 core PMU
  tools headers: Update the copy of x86's mem{cpy,set}_64.S used in 'perf bench'
  tools headers x86 cpufeatures: Sync with the kernel sources to pick TDX, Zen, APIC MSR fence changes
  tools headers UAPI: Sync unistd.h to pick {list,stat}mount, lsm_{[gs]et_self_attr,list_modules} syscall numbers
  perf vendor events intel: Alderlake/sapphirerapids metric fixes
  tools headers UAPI: Sync kvm headers with the kernel sources
  perf tools: Fix calloc() arguments to address error introduced in gcc-14
  perf top: Remove needless malloc(0) call that triggers -Walloc-size
  perf build: Make minimal shellcheck version to v0.6.0
  tools headers UAPI: Update tools's copy of drm.h headers to pick DRM_IOCTL_MODE_CLOSEFB
  perf test shell daemon: Make signal test less racy
  perf test shell script: Fix test for python being disabled
  perf test: Workaround debug output in list test
  perf list: Add output file option
  perf list: Switch error message to pr_err() to respect debug settings (-v)
  perf test: Fix 'perf script' tests on s390
  tools headers UAPI: Sync linux/fcntl.h with the kernel sources
  tools arch x86: Sync the msr-index.h copy with the kernel sources to pick IA32_MKTME_KEYID_PARTITIONING
  ...

octeontx2-pf: Fix a memleak otx2_sq_init

When qmem_alloc and pfvf->hw_ops->sq_aq_init fails, sq->sg should be
freed to prevent memleak.

Fixes: c9c12d339d93 ("octeontx2-pf: Add support for PTP clock")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Acked-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

atm: idt77252: fix a memleak in open_card_ubr0

When alloc_scq fails, card->vcs[0] (i.e. vc) should be freed. Otherwise,
in the following call chain:

idt77252_init_one
  |-> idt77252_dev_open
        |-> open_card_ubr0
              |-> alloc_scq [failed]
  |-> deinit_card
        |-> vfree(card->vcs);

card->vcs is freed and card->vcs[0] is leaked.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tunnels: fix out of bounds access when building IPv6 PMTU error

If the ICMPv6 error is built from a non-linear skb we get the following
splat,

  BUG: KASAN: slab-out-of-bounds in do_csum+0x220/0x240
  Read of size 4 at addr ffff88811d402c80 by task netperf/820
  CPU: 0 PID: 820 Comm: netperf Not tainted 6.8.0-rc1+ #543
  ...
   kasan_report+0xd8/0x110
   do_csum+0x220/0x240
   csum_partial+0xc/0x20
   skb_tunnel_check_pmtu+0xeb9/0x3280
   vxlan_xmit_one+0x14c2/0x4080
   vxlan_xmit+0xf61/0x5c00
   dev_hard_start_xmit+0xfb/0x510
   __dev_queue_xmit+0x7cd/0x32a0
   br_dev_queue_push_xmit+0x39d/0x6a0

Use skb_checksum instead of csum_partial who cannot deal with non-linear
SKBs.

Fixes: 4cb47a8644cc ("tunnels: PMTU discovery support for directly bridged IP packets")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tsnep: Fix mapping for zero copy XDP_TX action

For XDP_TX action xdp_buff is converted to xdp_frame. The conversion is
done by xdp_convert_buff_to_frame(). The memory type of the resulting
xdp_frame depends on the memory type of the xdp_buff. For page pool
based xdp_buff it produces xdp_frame with memory type
MEM_TYPE_PAGE_POOL. For zero copy XSK pool based xdp_buff it produces
xdp_frame with memory type MEM_TYPE_PAGE_ORDER0.

tsnep_xdp_xmit_back() is not prepared for that and uses always the page
pool buffer type TSNEP_TX_TYPE_XDP_TX. This leads to invalid mappings
and the transmission of undefined data.

Improve tsnep_xdp_xmit_back() to use the generic buffer type
TSNEP_TX_TYPE_XDP_NDO for zero copy XDP_TX.

Fixes: 3fc2333933fd ("tsnep: Add XDP socket zero-copy RX support")
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'selftests-net-more-fixes'

Paolo Abeni says:

====================
selftests: net: more fixes

Another small bunch of fixes, addressing issues outlined by the
netdev CI.

The first 2 patches are just rebased.

The following 2 are new fixes, for even more problems that surfaced
meanwhile.
====================

Link: https://lore.kernel.org/r/cover.1706812005.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: net: avoid just another constant wait

Using hard-coded constant timeout to wait for some expected
event is deemed to fail sooner or later, especially in slow
env.

Our CI has spotted another of such race:
# TEST: ipv6: cleanup of cached exceptions - nexthop objects [FAIL]
# can't delete veth device in a timely manner, PMTU dst likely leaked

Replace the crude sleep with a loop looking for the expected condition
at low interval for a much longer range.

Fixes: b3cc4f8a8a41 ("selftests: pmtu: add explicit tests for PMTU exceptions cleanup")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/fd5c745e9bb665b724473af6a9373a8c2a62b247.1706812005.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: net: fix tcp listener handling in pmtu.sh

The pmtu.sh test uses a few TCP listener in a problematic way:
It hard-codes a constant timeout to wait for the listener starting-up
in background. That introduces unneeded latency and on very slow and
busy host it can fail.

Additionally the test starts again the same listener in the same
namespace on the same port, just after the previous connection
completed. Fast host can attempt starting the new server before the
old one really closed the socket.

Address the issues using the wait_local_port_listen helper and
explicitly waiting for the background listener process exit.

Fixes: 136a1b434bbb ("selftests: net: test vxlan pmtu exceptions with tcp")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/f8e8f6d44427d8c45e9f6a71ee1a321047452087.1706812005.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: net: fix setup_ns usage in rtnetlink.sh

The setup_ns helper marks the testns global variable as
readonly. Later attempts to set such variable are unsuccessful,
causing a couple test failures.

Avoid completely the variable re-initialization and let the
function access the global value.

Fixes: e9ce7ededf14 ("selftests: rtnetlink: use setup_ns in bonding test")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/6e7c937c8ff73ca52a21a4a536a13a76ec0173a8.1706812005.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: net: cut more slack for gro fwd tests.

The udpgro_fwd.sh self-tests are somewhat unstable. There are
a few timing constraints the we struggle to meet on very slow
environments.

Instead of skipping the whole tests in such envs, increase the
test resilience WRT very slow hosts: increase the inter-packets
timeouts, avoid resetting the counters every second and finally
disable reduce the background traffic noise.

Tested with:

for I in $(seq 1 100); do
./tools/testing/selftests/kselftest_install/run_kselftest.sh \
-t net:udpgro_fwd.sh || exit -1
done

in a slow environment.

Fixes: a062260a9d5f ("selftests: net: add UDP GRO forwarding self-tests")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/f4b6b11064a0d39182a9ae6a853abae3e9b4426a.1706812005.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: atlantic: Fix DMA mapping for PTP hwts ring

Function aq_ring_hwts_rx_alloc() maps extra AQ_CFG_RXDS_DEF bytes
for PTP HWTS ring but then generic aq_ring_free() does not take this
into account.
Create and use a specific function to free HWTS ring to fix this
issue.

Trace:
[  215.351607] ------------[ cut here ]------------
[  215.351612] DMA-API: atlantic 0000:4b:00.0: device driver frees DMA memory with different size [device address=0x00000000fbdd0000] [map size=34816 bytes] [unmap size=32768 bytes]
[  215.351635] WARNING: CPU: 33 PID: 10759 at kernel/dma/debug.c:988 check_unmap+0xa6f/0x2360
...
[  215.581176] Call Trace:
[  215.583632]  <TASK>
[  215.585745]  ? show_trace_log_lvl+0x1c4/0x2df
[  215.590114]  ? show_trace_log_lvl+0x1c4/0x2df
[  215.594497]  ? debug_dma_free_coherent+0x196/0x210
[  215.599305]  ? check_unmap+0xa6f/0x2360
[  215.603147]  ? __warn+0xca/0x1d0
[  215.606391]  ? check_unmap+0xa6f/0x2360
[  215.610237]  ? report_bug+0x1ef/0x370
[  215.613921]  ? handle_bug+0x3c/0x70
[  215.617423]  ? exc_invalid_op+0x14/0x50
[  215.621269]  ? asm_exc_invalid_op+0x16/0x20
[  215.625480]  ? check_unmap+0xa6f/0x2360
[  215.629331]  ? mark_lock.part.0+0xca/0xa40
[  215.633445]  debug_dma_free_coherent+0x196/0x210
[  215.638079]  ? __pfx_debug_dma_free_coherent+0x10/0x10
[  215.643242]  ? slab_free_freelist_hook+0x11d/0x1d0
[  215.648060]  dma_free_attrs+0x6d/0x130
[  215.651834]  aq_ring_free+0x193/0x290 [atlantic]
[  215.656487]  aq_ptp_ring_free+0x67/0x110 [atlantic]
...
[  216.127540] ---[ end trace 6467e5964dd2640b ]---
[  216.132160] DMA-API: Mapped at:
[  216.132162]  debug_dma_alloc_coherent+0x66/0x2f0
[  216.132165]  dma_alloc_attrs+0xf5/0x1b0
[  216.132168]  aq_ring_hwts_rx_alloc+0x150/0x1f0 [atlantic]
[  216.132193]  aq_ptp_ring_alloc+0x1bb/0x540 [atlantic]
[  216.132213]  aq_nic_init+0x4a1/0x760 [atlantic]

Fixes: 94ad94558b0f ("net: aquantia: add PTP rings infrastructure")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240201094752.883026-1-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'trace-v6.8-rc2' of git://git./linux/kernel/git/trace/linux-trace

Pull tracing and eventfs fixes from Steven Rostedt:

- Fix the return code for ring_buffer_poll_wait()

   It was returing a -EINVAL instead of EPOLLERR.

- Zero out the tracefs_inode so that all fields are initialized.

   The ti->private could have had stale data, but instead of just
   initializing it to NULL, clear out the entire structure when it is
   allocated.

- Fix a crash in timerlat

   The hrtimer was initialized at read and not open, but is canceled at
   close. If the file was opened and never read the close will pass a
   NULL pointer to hrtime_cancel().

- Rewrite of eventfs.

   Linus wrote a patch series to remove the dentry references in the
   eventfs_inode and to use ref counting and more of proper VFS
   interfaces to make it work.

- Add warning to put_ei() if ei is not set to free. That means
   something is about to free it when it shouldn't.

- Restructure the eventfs_inode to make it more compact, and remove the
   unused llist field.

- Remove the fsnotify*() funtions for when the inodes were being
   created in the lookup code. It doesn't make sense to notify about
   creation just because something is being looked up.

- The inode hard link count was not accurate.

   It was being updated when a file was looked up. The inodes of
   directories were updating their parent inode hard link count every
   time the inode was created. That means if memory reclaim cleaned a
   stale directory inode and the inode was lookup up again, it would
   increment the parent inode again as well. Al Viro said to just have
   all eventfs directories have a hard link count of 1. That tells user
   space not to trust it.

* tag 'trace-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  eventfs: Keep all directory links at 1
  eventfs: Remove fsnotify*() functions from lookup()
  eventfs: Restructure eventfs_inode structure to be more condensed
  eventfs: Warn if an eventfs_inode is freed without is_freed being set
  tracing/timerlat: Move hrtimer_init to timerlat_fd open()
  eventfs: Get rid of dentry pointers without refcounts
  eventfs: Clean up dentry ops and add revalidate function
  eventfs: Remove unused d_parent pointer field
  tracefs: dentry lookup crapectomy
  tracefs: Avoid using the ei->dentry pointer unnecessarily
  eventfs: Initialize the tracefs inode properly
  tracefs: Zero out the tracefs_inode when allocating it
  ring-buffer: Clean ring_buffer_poll_wait() error return

Merge tag 'gfs2-v6.8-rc2-revert' of git://git./linux/kernel/git/gfs2/linux-gfs2

Pull gfs2 revert from Andreas Gruenbacher:
"It turns out that the commit to use GL_NOBLOCK flag for non-blocking
lookups has several issues, and not all of them have a simple fix"

* tag 'gfs2-v6.8-rc2-revert' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
Revert "gfs2: Use GL_NOBLOCK flag for non-blocking lookups"

Merge tag 'pci-v6.8-fixes-1' of git://git./linux/kernel/git/pci/pci

Pull pci fixes from Bjorn Helgaas:

- Fix a potential deadlock that was reintroduced by an ASPM revert
   merged for v6.8 (Johan Hovold)

- Add Manivannan Sadhasivam as PCI Endpoint maintainer (Lorenzo
   Pieralisi)

* tag 'pci-v6.8-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
  MAINTAINERS: Add Manivannan Sadhasivam as PCI Endpoint maintainer
  PCI/ASPM: Fix deadlock when enabling ASPM

Merge tag 'drm-fixes-2024-02-03' of git://anongit.freedesktop.org/drm/drm

Pul drm fixes from Dave Airlie:
"Regular weekly fixes, mostly amdgpu and xe. One nouveau fix is a
  better fix for the deadlock and also helps with a sync race we were
  seeing.

  dma-buf:
   - heaps CMA page accounting fix

  virtio-gpu:
   - fix segment size

  xe:
   - A crash fix
   - A fix for an assert due to missing mem_acces ref
   - Only allow a single user-fence per exec / bind.
   - Some sparse warning fixes
   - Two fixes for compilation failures on various odd combinations of
     gcc / arch pointed out on LKML.
   - Fix a fragile partial allocation pointed out on LKML.
   - A sysfs ABI documentation warning fix

  amdgpu:
   - Fix reboot issue seen on some 7000 series dGPUs
   - Fix client init order for KFD
   - Misc display fixes
   - USB-C fix
   - DCN 3.5 fixes
   - Fix issues with GPU scheduler and GPU reset
   - GPU firmware loading fix
   - Misc fixes
   - GC 11.5 fix
   - VCN 4.0.5 fix
   - IH overflow fix

  amdkfd:
   - SVM fixes
   - Trap handler fix
   - Fix device permission lookup
   - Properly reserve BO before validating it

  nouveau:
   - fence/irq lock deadlock fix (second attempt)
   - gsp command size fix

* tag 'drm-fixes-2024-02-03' of git://anongit.freedesktop.org/drm/drm: (35 commits)
  nouveau: offload fence uevents work to workqueue
  nouveau/gsp: use correct size for registry rpc.
  drm/amdgpu/pm: Use inline function for IP version check
  drm/hwmon: Fix abi doc warnings
  drm/xe: Make all GuC ABI shift values unsigned
  drm/xe/vm: Subclass userptr vmas
  drm/xe: Use LRC prefix rather than CTX prefix in lrc desc defines
  drm/xe: Don't use __user error pointers
  drm/xe: Annotate mcr_[un]lock()
  drm/xe: Only allow 1 ufence per exec / bind IOCTL
  drm/xe: Grab mem_access when disabling C6 on skip_guc_pc platforms
  drm/xe: Fix crash in trace_dma_fence_init()
  drm/amdgpu: Reset IH OVERFLOW_CLEAR bit
  drm/amdgpu: remove asymmetrical irq disabling in vcn 4.0.5 suspend
  drm/amdgpu: drm/amdgpu: remove golden setting for gfx 11.5.0
  drm/amdkfd: reserve the BO before validating it
  drm/amdgpu: Fix missing error code in 'gmc_v6/7/8/9_0_hw_init()'
  drm/amd/display: Fix buffer overflow in 'get_host_router_total_dp_tunnel_bw()'
  drm/amd/display: Add NULL check for kzalloc in 'amdgpu_dm_atomic_commit_tail()'
  drm/amd: Don't init MEC2 firmware when it fails to load
  ...

Merge tag 'input-for-v6.8-rc2' of git://git./linux/kernel/git/dtor/input

Pull input fixes from Dmitry Torokhov:

- a fix for the fix to deal with newer laptops which get confused by
   the "GET ID" command when probing for PS/2 keyboards

- a couple of tweaks to i8042 to handle Clevo NS70PU and Lifebook U728
   laptops

- a change to bcm5974 to validate that the device has appropriate
   endpoints

- an addition of new product ID to xpad driver to recognize Lenovo
   Legion Go controllers

- a quirk to Goodix controller to deal with extra GPIO described in
   ACPI tables on some devices.

* tag 'input-for-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: i8042 - add Fujitsu Lifebook U728 to i8042 quirk table
  Input: i8042 - fix strange behavior of touchpad on Clevo NS70PU
  Input: atkbd - do not skip atkbd_deactivate() when skipping ATKBD_CMD_GETID
  Input: atkbd - skip ATKBD_CMD_SETLEDS when skipping ATKBD_CMD_GETID
  Input: bcm5974 - check endpoint type before starting traffic
  Input: xpad - add Lenovo Legion Go controllers
  Input: goodix - accept ACPI resources with gpio_count == 3 && gpio_int_idx == 0

Merge tag 'sound-6.8-rc3' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
"A collection of fixes, mostly device-specific ones:

   - Minor PCM core fix for name strings

   - ASoC Qualcomm fixes, including DAI support extensions

   - ASoC AMD platform updates

   - ASoC Allwinner platform updates

   - Various ASoC codec fixes for WSA, WCD, ES8326 drivers

   - Various HD-audio and USB-audio fixes and quirks

   - A series of fixes for Cirrus CS35L56 codecs"

* tag 'sound-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (63 commits)
  ALSA: usb-audio: Ignore clock selector errors for single connection
  ALSA: hda/realtek: Enable headset mic on Vaio VJFE-ADL
  ALSA: hda: cs35l56: Remove unused test stub function
  ALSA: hda: cs35l56: Firmware file must match the version of preloaded firmware
  ALSA: hda: cs35l56: Fix filename string field layout
  ALSA: hda: cs35l56: Fix order of searching for firmware files
  ASoC: cs35l56: Allow more time for firmware to boot
  ASoC: cs35l56: Load tunings for the correct speaker models
  ASoC: cs35l56: Firmware file must match the version of preloaded firmware
  ASoC: cs35l56: Fix misuse of wm_adsp 'part' string for silicon revision
  ASoC: cs35l56: Fix for initializing ASP1 mixer registers
  ALSA: hda: cs35l56: Initialize all ASP1 registers
  ASoC: cs35l56: Fix default SDW TX mixer registers
  ASoC: cs35l56: Fix to ensure ASP1 registers match cache
  ASoC: cs35l56: Remove buggy checks from cs35l56_is_fw_reload_needed()
  ASoC: cs35l56: Don't add the same register patch multiple times
  ASoC: cs35l56: cs35l56_component_remove() must clean up wm_adsp
  ASoC: cs35l56: cs35l56_component_remove() must clear cs35l56->component
  ASoC: wm_adsp: Don't overwrite fwf_name with the default
  ASoC: wm_adsp: Fix firmware file search order
  ...

Merge tag 'hwmon-for-v6.8-rc3' of git://git./linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:

- pmbus/mp2975: Fix driver initialization

- gigabyte_waterforce: Add missing unlock in error handling path

* tag 'hwmon-for-v6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (pmbus/mp2975) Correct comment inside 'mp2975_read_byte_data'
  hwmon: (pmbus/mp2975) Fix driver initialization for MP2975 device
  hwmon: gigabyte_waterforce: Fix locking bug in waterforce_get_status()

Merge tag 'for-v6.8-rc' of git://git./linux/kernel/git/sre/linux-power-supply

Pull power supply fix from Sebastian Reichel:

- qcom_battmgr: revert broken fix

* tag 'for-v6.8-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
Revert "power: supply: qcom_battmgr: Register the power supplies after PDR is up"

Merge tag 'iommu-fixes-v6.8-rc2' of git://git./linux/kernel/git/joro/iommu

Pul iommu fixes from Joerg Roedel:

- Make iommu_ops->default_domain work without CONFIG_IOMMU_DMA to fix
   initialization of FSL-PAMU devices

- Fix for Tegra fbdev initialization failure

- Fix for a VFIO device unbinding failure on PowerPC

* tag 'iommu-fixes-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  powerpc: iommu: Bring back table group release_ownership() call
  drm/tegra: Do not assume that a NULL domain means no DMA IOMMU
  iommu: Allow ops->default_domain to work when !CONFIG_IOMMU_DMA

netdevsim: avoid potential loop in nsim_dev_trap_report_work()

Many syzbot reports include the following trace [1]

If nsim_dev_trap_report_work() can not grab the mutex,
it should rearm itself at least one jiffie later.

[1]
Sending NMI from CPU 1 to CPUs 0:
NMI backtrace for cpu 0
CPU: 0 PID: 32383 Comm: kworker/0:2 Not tainted 6.8.0-rc2-syzkaller-00031-g861c0981648f #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023
Workqueue: events nsim_dev_trap_report_work
RIP: 0010:bytes_is_nonzero mm/kasan/generic.c:89 [inline]
RIP: 0010:memory_is_nonzero mm/kasan/generic.c:104 [inline]
RIP: 0010:memory_is_poisoned_n mm/kasan/generic.c:129 [inline]
RIP: 0010:memory_is_poisoned mm/kasan/generic.c:161 [inline]
RIP: 0010:check_region_inline mm/kasan/generic.c:180 [inline]
RIP: 0010:kasan_check_range+0x101/0x190 mm/kasan/generic.c:189
Code: 07 49 39 d1 75 0a 45 3a 11 b8 01 00 00 00 7c 0b 44 89 c2 e8 21 ed ff ff 83 f0 01 5b 5d 41 5c c3 48 85 d2 74 4f 48 01 ea eb 09 <48> 83 c0 01 48 39 d0 74 41 80 38 00 74 f2 eb b6 41 bc 08 00 00 00
RSP: 0018:ffffc90012dcf998 EFLAGS: 00000046
RAX: fffffbfff258af1e RBX: fffffbfff258af1f RCX: ffffffff8168eda3
RDX: fffffbfff258af1f RSI: 0000000000000004 RDI: ffffffff92c578f0
RBP: fffffbfff258af1e R08: 0000000000000000 R09: fffffbfff258af1e
R10: ffffffff92c578f3 R11: ffffffff8acbcbc0 R12: 0000000000000002
R13: ffff88806db38400 R14: 1ffff920025b9f42 R15: ffffffff92c578e8
FS:  0000000000000000(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000c00994e078 CR3: 000000002c250000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<NMI>
</NMI>
<TASK>
  instrument_atomic_read include/linux/instrumented.h:68 [inline]
  atomic_read include/linux/atomic/atomic-instrumented.h:32 [inline]
  queued_spin_is_locked include/asm-generic/qspinlock.h:57 [inline]
  debug_spin_unlock kernel/locking/spinlock_debug.c:101 [inline]
  do_raw_spin_unlock+0x53/0x230 kernel/locking/spinlock_debug.c:141
  __raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:150 [inline]
  _raw_spin_unlock_irqrestore+0x22/0x70 kernel/locking/spinlock.c:194
  debug_object_activate+0x349/0x540 lib/debugobjects.c:726
  debug_work_activate kernel/workqueue.c:578 [inline]
  insert_work+0x30/0x230 kernel/workqueue.c:1650
  __queue_work+0x62e/0x11d0 kernel/workqueue.c:1802
  __queue_delayed_work+0x1bf/0x270 kernel/workqueue.c:1953
  queue_delayed_work_on+0x106/0x130 kernel/workqueue.c:1989
  queue_delayed_work include/linux/workqueue.h:563 [inline]
  schedule_delayed_work include/linux/workqueue.h:677 [inline]
  nsim_dev_trap_report_work+0x9c0/0xc80 drivers/net/netdevsim/dev.c:842
  process_one_work+0x886/0x15d0 kernel/workqueue.c:2633
  process_scheduled_works kernel/workqueue.c:2706 [inline]
  worker_thread+0x8b9/0x1290 kernel/workqueue.c:2787
  kthread+0x2c6/0x3a0 kernel/kthread.c:388
  ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
  ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:242
</TASK>

Fixes: 012ec02ae441 ("netdevsim: convert driver to use unlocked devlink API during init/fini")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240201175324.3752746-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'for-6.8/dm-fixes' of git://git./linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

- Fix DM ioctl interface to avoid INT_MAX overflow warnings from
   kvmalloc by limiting the number of targets and parameter size area.

- Fix DM stats to avoid INT_MAX overflow warnings from kvmalloc by
   limiting the number of entries supported.

- Fix DM writecache to support mapping devices larger than 1 TiB by
   switching from using kvmalloc_array to vmalloc_array -- which avoids
   INT_MAX overflow in kvmalloc_node and associated warnings.

- Remove the (ab)use of tasklets from both the DM crypt and verity
   targets. They will be converted to use BH workqueue in future.

* tag 'for-6.8/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm-crypt, dm-verity: disable tasklets
  dm writecache: allow allocations larger than 2GiB
  dm stats: limit the number of entries
  dm: limit the number of targets and parameter size area

Merge tag 'ata-6.8-rc3' of git://git./linux/kernel/git/libata/linux

Pull ata fix from Niklas Cassel:

- Following up on last week's ASMedia ASM1061 43-bit dma_mask quirk, we
   sent an email to ASMedia developers that have previously been active
   on the mailing list, asking exactly which SATA controllers that are
   affected by this hardware limitation.

   We got a reply that it affects all the SATA controllers in the
   ASM106x family, thus extend the existing 43-bit dma_mask quirk to
   apply to all the affected ASMedia SATA controllers.

* tag 'ata-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
  ahci: Extend ASM1061 43-bit DMA address quirk to other ASM106x parts

Input: i8042 - add Fujitsu Lifebook U728 to i8042 quirk table

Another Fujitsu-related patch.

In the initial boot stage the integrated keyboard of Fujitsu Lifebook U728
refuses to work and it's not possible to type for example a dm-crypt
passphrase without the help of an external keyboard.

i8042.nomux kernel parameter resolves this issue but using that a PS/2
mouse is detected. This input device is unused even when the i2c-hid-acpi
kernel module is blacklisted making the integrated ELAN touchpad
(04F3:3092) not working at all.

So this notebook uses a hid-over-i2c touchpad which is managed by the
i2c_designware input driver. Since you can't find a PS/2 mouse port on this
computer and you can't connect a PS/2 mouse to it even with an official
port replicator I think it's safe to not use the PS/2 mouse port at all.

Signed-off-by: Szilard Fabian <szfabian@bluemarch.art>
Link: https://lore.kernel.org/r/20240103014717.127307-2-szfabian@bluemarch.art
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Merge tag 'block-6.8-2024-02-01' of git://git.kernel.dk/linux

Pull block fixes from Jens Axboe:

- NVMe pull request via Keith:
     - Remove duplicated enums (Guixen)
     - Use appropriate controller state accessors (Keith)
     - Retryable authentication (Hannes)
     - Add missing module descriptions (Chaitanya)
     - Fibre-channel fixes for blktests (Daniel)
     - Various type correctness updates (Caleb)
     - Improve fabrics connection debugging prints (Nitin)
     - Passthrough command verbose error logging (Adam)

- Fix for where we set IO priority in the bio for drivers that use
   fops->submit_bio() to queue IO, like md/dm etc.

* tag 'block-6.8-2024-02-01' of git://git.kernel.dk/linux: (32 commits)
  block: Fix where bio IO priority gets set
  nvme: allow passthru cmd error logging
  nvme-fc: show hostnqn when connecting to fc target
  nvme-rdma: show hostnqn when connecting to rdma target
  nvme-tcp: show hostnqn when connecting to tcp target
  nvmet-fc: use RCU list iterator for assoc_list
  nvmet-fc: take ref count on tgtport before delete assoc
  nvmet-fc: avoid deadlock on delete association path
  nvmet-fc: abort command when there is no binding
  nvmet-fc: do not tack refs on tgtports from assoc
  nvmet-fc: remove null hostport pointer check
  nvmet-fc: hold reference on hostport match
  nvmet-fc: free queue and assoc directly
  nvmet-fc: defer cleanup using RCU properly
  nvmet-fc: release reference on target port
  nvmet-fcloop: swap the list_add_tail arguments
  nvme-fc: do not wait in vain when unloading module
  nvme-fc: log human-readable opcode on timeout
  nvme: split out fabrics version of nvme_opcode_str()
  nvme: take const cmd pointer in read-only helpers
  ...