drm/imagination: move update_logtype() into ifdef section

This function is only used when debugfs is enabled, and otherwise
causes a build warning:

drivers/gpu/drm/imagination/pvr_fw_trace.c:135:1: error: 'update_logtype' defined but not used [-Werror=unused-function]

Move the #ifdef check to include this function as well.

Fixes: cb56cd610866 ("drm/imagination: Add firmware trace to debugfs")
Acked-by: Frank Binns <frank.binns@imgtec.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231204073231.1164163-1-arnd@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>

drm/imagination: Removed unused functions in pvr_fw_trace

Fixing the warning below due to an unused file level vtable. Removing
only this causes additional warnings for the now unused functions, so
I've removed those too.

>> drivers/gpu/drm/imagination/pvr_fw_trace.c:205:37: warning: 'pvr_fw_trace_group_mask_fops' defined but not used [-Wunused-const-variable=]
     205 | static const struct file_operations pvr_fw_trace_group_mask_fops = {
         |                                     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~

Changes since v1:
- Corrected hash in Fixes tag.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311302054.MVYPxFCE-lkp@intel.com/
Fixes: cb56cd610866 ("drm/imagination: Add firmware trace to debugfs")
Signed-off-by: Donald Robson <donald.robson@imgtec.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204151337.60930-1-donald.robson@imgtec.com

drm/xlnx: Do not include <drm/drm_plane_helper.h>

Remove unnecessary include statements for <drm/drm_plane_helper.h>.
The file contains helpers for non-atomic code and should not be
required by most drivers. No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204090852.1650-9-tzimmermann@suse.de

drm/simpledrm: Do not include <drm/drm_plane_helper.h>

Remove unnecessary include statements for <drm/drm_plane_helper.h>.
The file contains helpers for non-atomic code and should not be
required by most drivers. No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204090852.1650-8-tzimmermann@suse.de

drm/ofdrm: Do not include <drm/drm_plane_helper.h>

Remove unnecessary include statements for <drm/drm_plane_helper.h>.
The file contains helpers for non-atomic code and should not be
required by most drivers. No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204090852.1650-7-tzimmermann@suse.de

drm/solomon: Do not include <drm/drm_plane_helper.h>

Remove unnecessary include statements for <drm/drm_plane_helper.h>.
The file contains helpers for non-atomic code and should not be
required by most drivers. No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204090852.1650-6-tzimmermann@suse.de

drm/shmobile: Do not include <drm/drm_plane_helper.h>

Remove unnecessary include statements for <drm/drm_plane_helper.h>.
The file contains helpers for non-atomic code and should not be
required by most drivers. No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204090852.1650-5-tzimmermann@suse.de

drm/loongson: Do not include <drm/drm_plane_helper.h>

Remove unnecessary include statements for <drm/drm_plane_helper.h>.
The file contains helpers for non-atomic code and should not be
required by most drivers. No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Sui Jingfeng <suijingfeng@loongson.cn>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204090852.1650-4-tzimmermann@suse.de

drm/amdgpu: Do not include <drm/drm_plane_helper.h>

Remove unnecessary include statements for <drm/drm_plane_helper.h>.
The file contains helpers for non-atomic code and should not be
required by most drivers. No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204090852.1650-3-tzimmermann@suse.de

drm/plane-helper: Move drm_plane_helper_atomic_check() into udl

The udl driver is the only caller of drm_plane_helper_atomic_check().
Move the function into the driver. No functional changes.

v2:
* fix documenation (Sui)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Sui Jingfeng <suijingfeng@loongson.cn>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204090852.1650-2-tzimmermann@suse.de

drm: Remove Kconfig option for legacy support (CONFIG_DRM_LEGACY)

Remove CONFIG_DRM_LEGACY from Kconfig. Nothing depends on the option.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: David Airlie <airlied@gmail.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231122122449.11588-15-tzimmermann@suse.de

char/agp: Remove frontend code

The AGP subsystem supports a user-space interface via /dev/agpgart. It
is only enabled with DRM support for mode setting in user space. (i.e.,
CONFIG_DRM_LEGACY). All of that DRM code has been removed and the option
will go away. Hence remove the AGP frontend.

Modern DRM drivers with kernel mode setting handle AGP support internally.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: David Airlie <airlied@gmail.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231122122449.11588-14-tzimmermann@suse.de

drm: Remove source code for non-KMS drivers

Remove all remaining source code for non-KMS drivers. These drivers
have been removed in v6.3 and won't comeback.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: David Airlie <airlied@gmail.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231122122449.11588-13-tzimmermann@suse.de

drm: Remove locking for legacy ioctls and DRM_UNLOCKED

Modern DRM drivers acquire ioctl locks by themselves. Legacy ioctls
for user-space mode setting used to acquire drm_global_mutex. After
removing the ioctl entry points, also remove the locking code. The only
legacy ioctl without global locking was VBLANK_WAIT, which has been
removed as well. Hence remove the related DRM_UNLOCKED flag.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: David Airlie <airlied@gmail.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231122122449.11588-12-tzimmermann@suse.de

drm: Remove support for legacy drivers

Remove all hooks and calls into code for user-space mode setting from
the DRM core. Without the drivers and ioctl entry points, none of this
is required any longer.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: David Airlie <airlied@gmail.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231122122449.11588-11-tzimmermann@suse.de

drm: Remove the legacy DRM_IOCTL_MODESET_CTL ioctl

DRM drivers with user-space mode setting have been removed in Linux
v6.3. [1] Now remove the ioctl entry points for these drivers. Invoking
any of the ioctl ops will unconditionally return -EINVAL to user space.

Invoking DRM_IOCTL_MODESET_CTL is different from the other legacy
ioctl ops as it returns 0 even without CONFIG_DRM_LEGACY set. From the
original commit 29935554b384 ("drm: Disallow DRM_IOCTL_MODESET_CTL for
KMS drivers") it is not apparent how or why the operation differs from
the others. It is likely just an oversight in commit 61ae227032e7
("drm: allow removal of legacy codepaths (v4.1)"), which allowed
disabling leagacy ioctls in the first place. Still keep this removal
separate from the other ioctls to allow an easy revert, if necessary.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/series/111602/
Reviewed-by: David Airlie <airlied@gmail.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231122122449.11588-10-tzimmermann@suse.de

drm: Remove entry points for legacy ioctls

DRM drivers with user-space mode setting have been removed in Linux
v6.3. [1] Now remove the ioctl entry points for these drivers. Invoking
any of the ioctl ops will unconditionally return -EINVAL to user space.
This has already been the behavior for kernels without CONFIG_DRM_LEGACY
set.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/series/111602/
Reviewed-by: David Airlie <airlied@gmail.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231122122449.11588-9-tzimmermann@suse.de

drm/radeon: Do not include <drm/drm_legacy.h>

Including <drm/drm_legacy.h> is not required by radeon.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Reviewed-by: David Airlie <airlied@gmail.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231122122449.11588-8-tzimmermann@suse.de

drm: Include <drm/drm_device.h>

Include <drm/drm_device.h> in drm_ioc32.c. Resolves a depenency
on <drm/drm_legacy.h>, which will be removed.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: David Airlie <airlied@gmail.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20231122122449.11588-7-tzimmermann@suse.de

accel: Include <drm/drm_auth.h>

One of the source files includes <drm/drm_auth.h> via <drm/drm_legacy.h>,
which will be removed. Include drm_auth.h directly.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: David Airlie <airlied@gmail.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231122122449.11588-6-tzimmermann@suse.de

drm/i915: Include <drm/drm_auth.h>

One of the source files includes <drm/drm_auth.h> via <drm/drm_legacy.h>,
which will be removed. Include drm_auth.h directly.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Reviewed-by: David Airlie <airlied@gmail.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231122122449.11588-5-tzimmermann@suse.de

drm: Include <drm/drm_auth.h>

One of the source files includes <drm/drm_auth.h> via <drm/drm_legacy.h>,
which will be removed. Include drm_auth.h directly.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: David Airlie <airlied@gmail.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231122122449.11588-4-tzimmermann@suse.de

drm: Fix TODO list mentioning non-KMS drivers

Non-KMS drivers have been removed from DRM. Update the TODO list
accordingly.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: a276afc19eec ("drm: Remove some obsolete drm pciids(tdfx, mga, i810, savage, r128, sis, via)")
Cc: Cai Huoqing <cai.huoqing@linux.dev>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.3+
Cc: linux-doc@vger.kernel.org
Reviewed-by: David Airlie <airlied@gmail.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231122122449.11588-3-tzimmermann@suse.de

drm/edp-panel: Sort the panel entries

Move the order of CMN 0x14e5 to make the list sorted.

Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231205123630.988663-3-treapking@chromium.org

drm/panel-edp: Add SDC ATNA45AF01

Add support for the SDC ATNA45AF01 panel.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231201-x1e80100-drm-panel-edp-v2-1-b0173484631a@linaro.org

drm/atomic: add private obj state to state dump

The drm_atomic_print_new_state() already prints private object state via
drm_atomic_private_obj_print_state(). Add private object state dumping
to __drm_state_dump(), so that it is also included into drm_state_dump()
output and into debugfs/dri/N/state file.

Reviewed-by: Rob Clark <robdclark@gmail.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231203000532.1290480-2-dmitry.baryshkov@linaro.org

drm/gpuvm: Let drm_gpuvm_bo_put() report when the vm_bo object is destroyed

Some users need to release resources attached to the vm_bo object when
it's destroyed. In Panthor's case, we need to release the pin ref so
BO pages can be returned to the system when all GPU mappings are gone.

This could be done through a custom drm_gpuvm::vm_bo_free() hook, but
this has all sort of locking implications that would force us to expose
a drm_gem_shmem_unpin_locked() helper, not to mention the fact that
having a ::vm_bo_free() implementation without a ::vm_bo_alloc() one
seems odd. So let's keep things simple, and extend drm_gpuvm_bo_put()
to report when the object is destroyed.

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204151406.1977285-1-boris.brezillon@collabora.com

drm/panfrost: Synchronize and disable interrupts before powering off

To make sure that we don't unintentionally perform any unclocked and/or
unpowered R/W operation on GPU registers, before turning off clocks and
regulators we must make sure that no GPU, JOB or MMU ISR execution is
pending: doing that requires to add a mechanism to synchronize the
interrupts on suspend.

Add functions panfrost_{gpu,job,mmu}_suspend_irq() which will perform
interrupts masking and ISR execution synchronization, and then call
those in the panfrost_device_runtime_suspend() handler in the exact
sequence of job (may require mmu!) -> mmu -> gpu.

As a side note, JOB and MMU suspend_irq functions needed some special
treatment: as their interrupt handlers will unmask interrupts, it was
necessary to add an `is_suspended` bitmap which is used to address the
possible corner case of unintentional IRQ unmasking because of ISR
execution after a call to synchronize_irq().

At resume, clear each is_suspended bit in the reset path of JOB/MMU
to allow unmasking the interrupts.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204114215.54575-4-angelogioacchino.delregno@collabora.com

drm/panfrost: Add gpu_irq, mmu_irq to struct panfrost_device

In preparation for adding a IRQ synchronization mechanism for PM suspend,
add gpu_irq and mmu_irq variables to struct panfrost_device and change
functions panfrost_gpu_init() and panfrost_mmu_init() to use those.

Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204114215.54575-3-angelogioacchino.delregno@collabora.com

drm/panfrost: Ignore core_mask for poweroff and disable PWRTRANS irq

Some SoCs may be equipped with a GPU containing two core groups
and this is exactly the case of Samsung's Exynos 5422 featuring
an ARM Mali-T628 MP6 GPU: the support for this GPU in Panfrost
is partial, as this driver currently supports using only one
core group and that's reflected on all parts of it, including
the power on (and power off, previously to this patch) function.

The issue with this is that even though executing the soft reset
operation should power off all cores unconditionally, on at least
one platform we're seeing a crash that seems to be happening due
to an interrupt firing which may be because we are calling power
transition only on the first core group, leaving the second one
unchanged, or because ISR execution was pending before entering
the panfrost_gpu_power_off() function and executed after powering
off the GPU cores, or all of the above.

Finally, solve this by:
 - Avoid to enable the power transition interrupt on reset; and
 - Ignoring the core_mask and ask the GPU to poweroff both core groups

Fixes: 22aa1a209018 ("drm/panfrost: Really power off GPU cores in panfrost_gpu_power_off()")
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204114215.54575-2-angelogioacchino.delregno@collabora.com

drm/panel-simple: add Evervision VGG644804 panel entry

Timings taken from the datasheet, although sometimes there are just
typical values and it's not clear if they are no min and max values or
if you must use the typical value exactly. To make things worse, there
is no back porch but only a combined sync and back porch length.

Unfortunately, there is not public datasheet. Therefore, here are the
relevant timings:
                 | min |  typ   | max |
-----------------+-----+--------+-----+
CLK frequency    |  -  | 25.175 |  -  |
HS period        |  -  |   800  |  -  |
HS pulse width   |  5  |    30  |  -  |
HS-DEN time      | 112 |   144  | 175 |
DEN pulse width  |  -  |   640  |  -  |
VS pulse width   |  1  |     3  |  5  |
VS-DEN time      |  -  |    35  |  -  |
VS period        |  -  |   525  |  -  |

Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231123102404.2022201-2-mwalle@kernel.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231123102404.2022201-2-mwalle@kernel.org

dt-bindings: display: simple: add Evervision VGG644804 panel

Add Evervision VGG644804 5.7" 640x480 LVDS panel compatible string.

Signed-off-by: Michael Walle <mwalle@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231123102404.2022201-1-mwalle@kernel.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231123102404.2022201-1-mwalle@kernel.org

drm/panel: ilitek-ili9881c: Add Ampire AM8001280G LCD panel

Add support for Ampire AM8001280G LCD panels.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231123-drm-panel-ili9881c-am8001280g-v1-3-fdf4d624c211@pengutronix.de
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231123-drm-panel-ili9881c-am8001280g-v1-3-fdf4d624c211@pengutronix.de

dt-bindings: ili9881c: Add Ampire AM8001280G LCD panel

Document the compatible value for Ampire AM8001280G LCD panels.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231123-drm-panel-ili9881c-am8001280g-v1-2-fdf4d624c211@pengutronix.de
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231123-drm-panel-ili9881c-am8001280g-v1-2-fdf4d624c211@pengutronix.de

drm/panel: ilitek-ili9881c: make use of prepare_prev_first

The panel.prepare() call requires an initialized MIPI-DSI host, so set
the prepare_prev_first flag to indicate that the host must be
initialized first.

Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231123-drm-panel-ili9881c-am8001280g-v1-1-fdf4d624c211@pengutronix.de
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231123-drm-panel-ili9881c-am8001280g-v1-1-fdf4d624c211@pengutronix.de

drm/panel: himax-hx8394: Add Support for Powkiddy X55 panel

Add support for the Powkiddy X55 panel as used on the Powkiddy X55
handheld gaming console. This panel uses a Himax HX8394 display
controller and requires a vendor provided init sequence. The display
resolution is 720x1280 and is 67mm by 121mm as measured with calipers.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231204185719.569021-7-macroalpha82@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204185719.569021-7-macroalpha82@gmail.com

dt-bindings: display: himax-hx8394: Add Powkiddy X55 panel

Add compatible string for the Powkiddy X55 panel.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231204185719.569021-6-macroalpha82@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204185719.569021-6-macroalpha82@gmail.com

drm/panel: himax-hx8394: Add Panel Rotation Support

Add support for setting the rotation property for the Himax HX8394
panel.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231204185719.569021-5-macroalpha82@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204185719.569021-5-macroalpha82@gmail.com

dt-bindings: display: Document Himax HX8394 panel rotation

Document panel rotation for Himax HX8394 display panel.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231204185719.569021-4-macroalpha82@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204185719.569021-4-macroalpha82@gmail.com

drm/panel: himax-hx8394: Drop shutdown logic

The driver shutdown is duplicate as it calls drm_unprepare and
drm_disable which are called anyway when associated drivers are
shutdown/removed.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231204185719.569021-3-macroalpha82@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204185719.569021-3-macroalpha82@gmail.com

drm/panel: himax-hx8394: Drop prepare/unprepare tracking

Drop the panel specific prepare/unprepare logic. This is now tracked
by the DRM stack [1].

[1] commit d2aacaf07395 ("drm/panel: Check for already prepared/enabled in
drm_panel")

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231204185719.569021-2-macroalpha82@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204185719.569021-2-macroalpha82@gmail.com

drm/panel: simple: Add BOE BP101WX1-100 panel

This panel is found on Motorola mapphone tablets from mz615 to mz617.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231127051547.15023-2-tony@atomide.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231127051547.15023-2-tony@atomide.com

dt-bindings: display: simple: Add boe,bp101wx1-100 panel

This panel is found on Motorola mapphone tablets mz615 to mz617.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231127051547.15023-1-tony@atomide.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231127051547.15023-1-tony@atomide.com

drm/imagination: vm: make use of GPUVM's drm_exec helper

Make use of GPUVM's drm_exec helper functions preventing direct access
to GPUVM internal data structures, such as the external object list.

This is especially important to ensure following the locking rules
around the GPUVM external object list.

Fixes: ff5f643de0bf ("drm/imagination: Add GEM and VM related code")
Reviewed-by: Donald Robson <donald.robson@imgtec.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231129220835.297885-3-dakr@redhat.com

drm/gpuvm: fall back to drm_exec_lock_obj()

Fall back to drm_exec_lock_obj() if num_fences is zero for the
drm_gpuvm_prepare_* function family.

Otherwise dma_resv_reserve_fences() would actually allocate slots even
though num_fences is zero.

Cc: Christian König <christian.koenig@amd.com>
Acked-by: Donald Robson <donald.robson@imgtec.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231129220835.297885-2-dakr@redhat.com

drm/v3d: Fix missing error code in v3d_submit_cpu_ioctl()

Smatch warns:
drivers/gpu/drm/v3d/v3d_submit.c:1222 v3d_submit_cpu_ioctl()
warn: missing error code 'ret'

When there is no job type or job is submitted with wrong number of BOs
it is an error path, ret is zero at this point which is incorrect
return.

Fix this by changing it to -EINVAL.

Fixes: aafc1a2bea67 ("drm/v3d: Add a CPU job submission")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204122102.181298-1-harshit.m.mogalapalli@oracle.com

Revert "drm: Introduce pixel_source DRM plane property"

This reverts commit e50e5fed41c7eed2db4119645bf3480ec43fec11.

Although the Solid Fill planes patchset got all reviews and
acknowledgements, it doesn't fulfill requirements for the new uABI. It
has neither corresponding open-source userspace implementation nor the
IGT tests coverage. Reverting this patchset until userspace obligations
are fulfilled.

Acked-by: Simon Ser <contact@emersion.fr>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204131455.19023-8-dmitry.baryshkov@linaro.org

Revert "drm: Introduce solid fill DRM plane property"

This reverts commit 85863a4e16e77079ee14865905ddc3ef9483a640.

Although the Solid Fill planes patchset got all reviews and
acknowledgements, it doesn't fulfill requirements for the new uABI. It
has neither corresponding open-source userspace implementation nor the
IGT tests coverage. Reverting this patchset until userspace obligations
are fulfilled.

Acked-by: Simon Ser <contact@emersion.fr>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204131455.19023-7-dmitry.baryshkov@linaro.org

Revert "drm: Add solid fill pixel source"

This reverts commit 4b64167042927531f4cfaf035b8f88c2f7a05f06.

Although the Solid Fill planes patchset got all reviews and
acknowledgements, it doesn't fulfill requirements for the new uABI. It
has neither corresponding open-source userspace implementation nor the
IGT tests coverage. Reverting this patchset until userspace obligations
are fulfilled.

Acked-by: Simon Ser <contact@emersion.fr>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204131455.19023-6-dmitry.baryshkov@linaro.org

Revert "drm/atomic: Add pixel source to plane state dump"

This reverts commit 8283ac7871a959848e09fc6593b8c12b8febfee6.

Although the Solid Fill planes patchset got all reviews and
acknowledgements, it doesn't fulfill requirements for the new uABI. It
has neither corresponding open-source userspace implementation nor the
IGT tests coverage. Reverting this patchset until userspace obligations
are fulfilled.

Acked-by: Simon Ser <contact@emersion.fr>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204131455.19023-5-dmitry.baryshkov@linaro.org

Revert "drm/atomic: Add solid fill data to plane state dump"

This reverts commit e86413f5442ee094e66b3e75f2d3419ed0df9520.

Although the Solid Fill planes patchset got all reviews and
acknowledgements, it doesn't fulfill requirements for the new uABI. It
has neither corresponding open-source userspace implementation nor the
IGT tests coverage. Reverting this patchset until userspace obligations
are fulfilled.

Acked-by: Simon Ser <contact@emersion.fr>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204131455.19023-4-dmitry.baryshkov@linaro.org

Revert "drm/atomic: Move framebuffer checks to helper"

This reverts commit 4ba6b7a646321e740c7f2d80c90505019c4e8fce.

Although the Solid Fill planes patchset got all reviews and
acknowledgements, it doesn't fulfill requirements for the new uABI. It
has neither corresponding open-source userspace implementation nor the
IGT tests coverage. Reverting this patchset until userspace obligations
are fulfilled.

Acked-by: Simon Ser <contact@emersion.fr>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204131455.19023-3-dmitry.baryshkov@linaro.org

Revert "drm/atomic: Loosen FB atomic checks"

This reverts commit f1e75da5364e780905d9cd6043f9c74cdcf84073.

Although the Solid Fill planes patchset got all reviews and
acknowledgements, it doesn't fulfill requirements for the new uABI. It
has neither corresponding open-source userspace implementation nor the
IGT tests coverage. Reverting this patchset until userspace obligations
are fulfilled.

Acked-by: Simon Ser <contact@emersion.fr>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204131455.19023-2-dmitry.baryshkov@linaro.org

drm/bridge: migrate bridge_chains to per-encoder file

Instead of having a single file with all bridge chains, list bridges
under a corresponding per-encoder debugfs directory.

While we are at it, also slightly improve the formatting of the bridge
data: split a single line entry into multiple lines, include the symbol
name of the bridge funcs and add the textual representation of the
bridge ops.

Example of the listing:

$ cat /sys/kernel/debug/dri/0/encoder-0/bridges
bridge[0]: dsi_mgr_bridge_funcs
type: [0] Unknown
ops: [0]
bridge[1]: lt9611uxc_bridge_funcs
type: [11] HDMI-A
OF: /soc@0/geniqup@9c0000/i2c@994000/hdmi-bridge@2b:lontium,lt9611uxc
ops: [7] detect edid hpd

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231203115315.1306124-3-dmitry.baryshkov@linaro.org

drm/encoder: register per-encoder debugfs dir

Each of connectors and CRTCs used by the DRM device provides debugfs
directory, which is used by several standard debugfs files and can
further be extended by the driver. Add such generic debugfs directories
for encoder.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231203115315.1306124-2-dmitry.baryshkov@linaro.org

usb: typec: qcom-pmic-typec: switch to DRM_AUX_HPD_BRIDGE

Use the freshly defined DRM_AUX_HPD_BRIDGE instead of open-coding the
same functionality for the DRM bridge chain termination.

Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231203114333.1305826-7-dmitry.baryshkov@linaro.org

soc: qcom: pmic-glink: switch to DRM_AUX_HPD_BRIDGE

Use the freshly defined DRM_AUX_HPD_BRIDGE instead of open-coding the
same functionality for the DRM bridge chain termination.

Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Acked-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231203114333.1305826-6-dmitry.baryshkov@linaro.org

drm/bridge: implement generic DP HPD bridge

Several USB-C controllers implement a pretty simple DRM bridge which
implements just the HPD notification operations. Add special helper
for creating such simple bridges.

Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231203114333.1305826-5-dmitry.baryshkov@linaro.org

usb: typec: nb7vpq904m: switch to DRM_AUX_BRIDGE

Switch to using the new DRM_AUX_BRIDGE helper to create the
transparent DRM bridge device instead of handcoding corresponding
functionality.

Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231203114333.1305826-4-dmitry.baryshkov@linaro.org

phy: qcom: qmp-combo: switch to DRM_AUX_BRIDGE

Switch to using the new DRM_AUX_BRIDGE helper to create the
transparent DRM bridge device instead of handcoding corresponding
functionality.

Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231203114333.1305826-3-dmitry.baryshkov@linaro.org

drm/bridge: add transparent bridge helper

Define a helper for creating simple transparent bridges which serve the
only purpose of linking devices into the bridge chain up to the last
bridge representing the connector. This is especially useful for
DP/USB-C bridge chains, which can span across several devices, but do
not require any additional functionality from the intermediate bridges.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231203114333.1305826-2-dmitry.baryshkov@linaro.org

MAINTAINERS: Document Imagination PowerVR driver patches go via drm-misc

This is the tree used by nearly all other DRM drivers, so use it for the
PowerVR driver as well.

Signed-off-by: Frank Binns <frank.binns@imgtec.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204132847.1307340-1-frank.binns@imgtec.com

drm/bridge: nxp-ptn3460: fix i2c_master_send() error checking

The i2c_master_send/recv() functions return negative error codes or the
number of bytes that were able to be sent/received.  This code has
two problems.  1)  Instead of checking if all the bytes were sent or
received, it checks that at least one byte was sent or received.
2) If there was a partial send/receive then we should return a negative
error code but this code returns success.

Fixes: a9fe713d7d45 ("drm/bridge: Add PTN3460 bridge driver")
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/0cdc2dce-ca89-451a-9774-1482ab2f4762@moroto.mountain

drm/bridge: lt8912b: Add power supplies

Add supplies to the driver that can be used to turn the Lontium lt8912b
on and off. It can have up to 7 independent supplies, we add them all
and enable/disable them with bulk_enable/disable.

Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231115121338.22959-4-francesco@dolcini.it

dt-bindings: display: bridge: lt8912b: Add power supplies

Add Lontium lt8912b power supplies.

Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231115121338.22959-3-francesco@dolcini.it

drm/bridge: lt8912b: Add suspend/resume support

Add support for suspend and resume. The lt8912b will power off when
going into suspend and power on when resuming.

Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231115121338.22959-2-francesco@dolcini.it

drm/display/dp: Add the remaining Square PHY patterns DPCD register definitions

DP2.1 Specs added new DPCDs definitions for square pattern configs[1]
These new definitions are used for UHBR Source Transmitter
Equalizations tests[2]. Add the 3 new values for square pattern.

v2: rebase

[1]: DP2.1 Specs - 2.12.3.6.5 Square Pattern
[2]: DP2.1 PHY CTS specs - 4.3 UHBR Source Transmitter Equalization

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Lee Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231130231510.221143-1-khaled.almahallawy@intel.com

drm/qxl: remove unused declaration

Some functions are never used by the driver,
removing the functions declaration, it can be reducing program size,
and improving code readability and maintainability.

Signed-off-by: heminhong <heminhong@kylinos.cn>
Link: https://lore.kernel.org/r/20231110055031.57360-1-heminhong@kylinos.cn
Signed-off-by: Maxime Ripard <mripard@kernel.org>

drm/drv: propagate errors from drm_modeset_register_all()

In case the drm_modeset_register_all() function fails, its error code
will be ignored. Instead make the drm_dev_register() bail out in case of
such an error.

Fixes: 79190ea2658a ("drm: Add callbacks for late registering")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231202225552.1283638-1-dmitry.baryshkov@linaro.org

drm/imagination: Removed unused function to_pvr_vm_gpuva()

This function is now unused, hence it causes a compiler warning.

   drivers/gpu/drm/imagination/pvr_vm.c:112:22: warning: unused function 'to_pvr_vm_gpuva' [-Wunused-function]
     112 | struct pvr_vm_gpuva *to_pvr_vm_gpuva(struct drm_gpuva *gpuva)
         |                      ^

Remove the function for now.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311242159.hh8MWiAm-lkp@intel.com/
Fixes: ff5f643de0bf ("drm/imagination: Add GEM and VM related code")
Signed-off-by: Donald Robson <donald.robson@imgtec.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231130160017.259902-5-donald.robson@imgtec.com

drm/imagination: pvr_gpuvm_free() now static

The function below is used only within this source file, but is not static.

drivers/gpu/drm/imagination/pvr_vm.c:542:6: error: no previous prototype for 'pvr_gpuvm_free' [-Werror=missing-prototypes]
  542 | void pvr_gpuvm_free(struct drm_gpuvm *gpuvm)

Make it static.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311242159.hh8MWiAm-lkp@intel.com/
Fixes: ff5f643de0bf ("drm/imagination: Add GEM and VM related code")
Signed-off-by: Donald Robson <donald.robson@imgtec.com>
Link: https://lore.kernel.org/r/20231130160017.259902-4-donald.robson@imgtec.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>

drm/imagination: pvr_device_process_active_queues now static

The function below is used only within this source file, but is not static.

>> drivers/gpu/drm/imagination/pvr_device.c:129:6: warning: no previous prototype for function 'pvr_device_process_active_queues' [-Wmissing-prototypes]
     129 | void pvr_device_process_active_queues(struct pvr_device *pvr_dev)
         |      ^
   drivers/gpu/drm/imagination/pvr_device.c:129:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
     129 | void pvr_device_process_active_queues(struct pvr_device *pvr_dev)
         | ^
         | static
   1 warning generated.

Make it static.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311250632.giVEx7MU-lkp@intel.com/
Fixes: eaf01ee5ba28 ("drm/imagination: Implement job submission and scheduling")
Signed-off-by: Donald Robson <donald.robson@imgtec.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231130160017.259902-3-donald.robson@imgtec.com

drm/imagination: Fixed missing header in pvr_fw_meta

A missing header causes the compiler to warn that the function below is not
forward declared.

>> drivers/gpu/drm/imagination/pvr_fw_meta.c:33:1: warning: no previous prototype for function 'pvr_meta_cr_read32' [-Wmissing-prototypes]
      33 | pvr_meta_cr_read32(struct pvr_device *pvr_dev, u32 reg_addr, u32 *reg_value_out)
         | ^
   drivers/gpu/drm/imagination/pvr_fw_meta.c:32:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
      32 | int
         | ^
         | static
   1 warning generated.

Include the correct header.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311250226.Da2yiSKp-lkp@intel.com/
Fixes: cc1aeedb98ad ("drm/imagination: Implement firmware infrastructure and META FW support")
Signed-off-by: Donald Robson <donald.robson@imgtec.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231130160017.259902-2-donald.robson@imgtec.com

drm/imagination: Fixed warning due to implicit cast to bool

This line appears to confuse the compiler and had been noticed previously in
clang-tidy output. There isn't anything fundamentally wrong that I can see.
I suspect that it just looks like a mistake - hence the first note.  By making
the second operand an actual bool result, const correctness can be preserved
while silencing the warning.

>> drivers/gpu/drm/imagination/pvr_device_info.c:230:47: warning: use of logical '&&' with constant operand [-Wconstant-logical-operand]
     230 |         } else if (features_size == mapping_max_size && (mapping_max & 63)) {
         |                                                      ^  ~~~~~~~~~~~~~~~~~~
   drivers/gpu/drm/imagination/pvr_device_info.c:230:47: note: use '&' for a bitwise operation
     230 |         } else if (features_size == mapping_max_size && (mapping_max & 63)) {
         |                                                      ^~
         |                                                      &
   drivers/gpu/drm/imagination/pvr_device_info.c:230:47: note: remove constant to silence this warning
     230 |         } else if (features_size == mapping_max_size && (mapping_max & 63)) {
         |                                                     ~^~~~~~~~~~~~~~~~~~~~~
   1 warning generated.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311241752.3iLyyFcA-lkp@intel.com/
Fixes: f99f5f3ea7ef ("drm/imagination: Add GPU ID parsing and firmware loading")
Signed-off-by: Donald Robson <donald.robson@imgtec.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231130160017.259902-1-donald.robson@imgtec.com

drm/test: add a test suite for GEM objects backed by shmem

This patch introduces an initial KUnit test suite for GEM objects
backed by shmem buffers.

Suggested-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Marco Pagani <marpagan@redhat.com>
v5:
- using __drm_kunit_helper_alloc_drm_device() to avoid local struct
v4:
- Add missing MMU dependency for DRM_GEM_SHMEM_HELPER (kernel test robot)
v3:
- Explicitly cast pointers in the helpers
- Removed unused pointer to parent dev in struct fake_dev
- Test entries reordering in Kconfig and Makefile sent as a separate patch
v2:
- Improved description of test cases
- Cleaner error handling using KUnit actions
- Alphabetical order in Kconfig and Makefile

Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231130171417.74162-1-marpagan@redhat.com

drm: remove drm_bridge_hpd_disable() from drm_bridge_connector_destroy()

drm_bridge_hpd_enable()/drm_bridge_hpd_disable() callbacks call into
the respective driver's hpd_enable()/hpd_disable() ops. These ops control
the HPD enable/disable logic which in some cases like MSM can be a
dedicate hardware block to control the HPD.

During probe_defer cases, a connector can be initialized and then later
destroyed till the probe is retried. During connector destroy in these
cases, the hpd_disable() callback gets called without a corresponding
hpd_enable() leading to an unbalanced state potentially causing even
a crash.

This can be avoided by the respective drivers maintaining their own
state logic to ensure that a hpd_disable() without a corresponding
hpd_enable() just returns without doing anything.

However, to have a generic fix it would be better to avoid the
hpd_disable() callback from the connector destroy path and let
the hpd_enable() / hpd_disable() balance be maintained by the
corresponding drm_bridge_connector_enable_hpd() /
drm_bridge_connector_disable_hpd() APIs which should get called by
drm_kms_helper_disable_hpd().

changes in v2:
- minor change in commit text (Dmitry)

Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919174813.26958-1-quic_abhinavk@quicinc.com

drm: improve the documentation of connector hpd ops

While making the changes in [1], it was noted that the documentation
of the enable_hpd() and disable_hpd() does not make it clear that
these ops should not try to do hpd state maintenance and should only
enable/disable hpd related hardware for the connector.

The state management of these calls to make sure these calls are
balanced is handled by the DRM core and we should keep it that way
to minimize the overhead in the drivers which implement these ops.

[1]: https://patchwork.freedesktop.org/patch/558387/

Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230920201358.27597-1-quic_abhinavk@quicinc.com

dt-bindings: gpu: mali-utgard: Add Rockchip RK3128 compatible

Rockchip RK312x SoC family has a Mali400 MP2.
Add a compatible for it.

Signed-off-by: Alex Bee <knaerzche@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231202125144.66052-4-knaerzche@gmail.com

drm/atomic: Loosen FB atomic checks

Loosen the requirements for atomic and legacy commit so that, in cases
where pixel_source != FB, the commit can still go through.

This includes adding framebuffer NULL checks in other areas to account for
FB being NULL when non-FB pixel sources are enabled.

To disable a plane, the pixel_source must be NONE or the FB must be NULL
if pixel_source == FB.

Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231027-solid-fill-v7-7-780188bfa7b2@quicinc.com

drm/atomic: Move framebuffer checks to helper

Currently framebuffer checks happen directly in
drm_atomic_plane_check(). Move these checks into their own helper
method.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Sebastian Wick <sebastian@sebastianwick.net>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231027-solid-fill-v7-6-780188bfa7b2@quicinc.com

drm/atomic: Add solid fill data to plane state dump

Add solid_fill property data to the atomic plane state dump.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Sebastian Wick <sebastian@sebastianwick.net>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231027-solid-fill-v7-5-780188bfa7b2@quicinc.com

drm/atomic: Add pixel source to plane state dump

Add pixel source to the atomic plane state dump

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Sebastian Wick <sebastian@sebastianwick.net>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231027-solid-fill-v7-4-780188bfa7b2@quicinc.com

drm: Add solid fill pixel source

Add "SOLID_FILL" as a valid pixel source. If the pixel_source property is
set to "SOLID_FILL", it will display data from the drm_plane "solid_fill"
blob property.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Sebastian Wick <sebastian@sebastianwick.net>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231027-solid-fill-v7-3-780188bfa7b2@quicinc.com

drm: Introduce solid fill DRM plane property

Document and add support for solid_fill property to drm_plane. In
addition, add support for setting and getting the values for solid_fill.

To enable solid fill planes, userspace must assign a property blob to
the "solid_fill" plane property containing the following information:

struct drm_mode_solid_fill {
u32 r, g, b, pad;
};

Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Sebastian Wick <sebastian@sebastianwick.net>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231027-solid-fill-v7-2-780188bfa7b2@quicinc.com

drm: Introduce pixel_source DRM plane property

Add support for pixel_source property to drm_plane and related
documentation. In addition, force pixel_source to
DRM_PLANE_PIXEL_SOURCE_FB in DRM_IOCTL_MODE_SETPLANE as to not break
legacy userspace.

This enum property will allow user to specify a pixel source for the
plane. Possible pixel sources will be defined in the
drm_plane_pixel_source enum.

Currently, the only pixel sources are DRM_PLANE_PIXEL_SOURCE_FB (the
default value) and DRM_PLANE_PIXEL_SOURCE_NONE.

Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Sebastian Wick <sebastian@sebastianwick.net>
Acked-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231027-solid-fill-v7-1-780188bfa7b2@quicinc.com

dma-buf/sw_sync: Add fence deadline support

This consists of simply storing the most recent deadline, and adding an
ioctl to retrieve the deadline.  This can be used in conjunction with
the SET_DEADLINE ioctl on a fence fd for testing.  Ie. create various
sw_sync fences, merge them into a fence-array, set deadline on the
fence-array and confirm that it is propagated properly to each fence.

v2: Switch UABI to express deadline as u64
v3: More verbose UAPI docs, show how to convert from timespec
v4: Better comments, track the soonest deadline, as a normal fence
    implementation would, return an error if no deadline set.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230823215458.203366-4-robdclark@gmail.com

dma-buf/sync_file: Add SET_DEADLINE ioctl

The initial purpose is for igt tests, but this would also be useful for
compositors that wait until close to vblank deadline to make decisions
about which frame to show.

The igt tests can be found at:

https://gitlab.freedesktop.org/robclark/igt-gpu-tools/-/commits/fence-deadline

v2: Clarify the timebase, add link to igt tests
v3: Use u64 value in ns to express deadline.
v4: More doc

Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230823215458.203366-3-robdclark@gmail.com

drm/syncobj: Add deadline support for syncobj waits

Add a new flag to let userspace provide a deadline as a hint for syncobj
and timeline waits.  This gives a hint to the driver signaling the
backing fences about how soon userspace needs it to compete work, so it
can adjust GPU frequency accordingly.  An immediate deadline can be
given to provide something equivalent to i915 "wait boost".

v2: Use absolute u64 ns value for deadline hint, drop cap and driver
    feature flag in favor of allowing count_handles==0 as a way for
    userspace to probe kernel for support of new flag
v3: More verbose comments about UAPI
v4: Fix negative zero, s/deadline_ns/deadline_nsec/ for consistency with
    existing ioctl struct fields
v5: Comment/description typo fixes

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
[DB: fixed checkpatch warnings]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230823215458.203366-2-robdclark@gmail.com

accel/qaic: Expand DRM device lifecycle

Currently the QAIC DRM device registers itself when the MHI QAIC_CONTROL
channel becomes available. This is when the device is able to process
workloads. However, the DRM driver also provides the debugfs interface
bootlog for the device. If the device fails to boot to the QSM (which
brings up the MHI QAIC_CONTROL channel), the bootlog won't be available for
debugging why it failed to boot.

Change when the DRM device registers itself from when QAIC_CONTROL is
available to when the card is first probed on the PCI bus. Additionally,
make the DRM driver persist through reset/error cases so the driver
doesn't have to be reloaded to access the card again. Send
KOBJ_ONLINE/OFFLINE uevents so userspace can know when DRM device is
ready to handle requests.

Signed-off-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231117174337.20174-3-quic_jhugo@quicinc.com

accel/qaic: Increase number of in_reset states

'in_reset' holds the state of the device. As part of bringup, the device
needs to be queried to check if it's in a valid state. Add a new state
that indicates that the device is coming up, but not ready for users
yet. Rename to 'dev_state' to better describe the variable.

Signed-off-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231117174337.20174-2-quic_jhugo@quicinc.com

drm/imx/lcdc: Fix double-free of driver data

The struct imx_lcdc driver data is allocated using devm_drm_dev_alloc()
so it must not be explicitly kfree()d.

Also drm_kms_helper_poll_fini() should not be called as there is no
matching drm_kms_helper_poll_init(). So drop the release function
completely.

Fixes: c87e859cdeb5 ("drm/imx/lcdc: Implement DRM driver for imx25")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230706092731.2630232-1-u.kleine-koenig@pengutronix.de

drm/v3d: Create a CPU job extension for the copy performance query job

A CPU job is a type of job that performs operations that requires CPU
intervention. A copy performance query job is a job that copy the complete
or partial result of a query to a buffer. In order to copy the result of
a performance query to a buffer, we need to get the values from the
performance monitors.

So, create a user extension for the CPU job that enables the creation
of a copy performance query job. This user extension will allow the creation
of a CPU job that copy the results of a performance query to a BO with the
possibility to indicate the availability with a availability bit.

Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231130164420.932823-19-mcanal@igalia.com

drm/v3d: Create a CPU job extension for the reset performance query job

A CPU job is a type of job that performs operations that requires CPU
intervention. A reset performance query job is a job that resets the
performance queries by resetting the values of the perfmons. Moreover,
we also reset the syncobjs related to the availability of the query.

So, create a user extension for the CPU job that enables the creation
of a reset performance job. This user extension will allow the creation of
a CPU job that resets the perfmons values and resets the availability syncobj.

Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231130164420.932823-18-mcanal@igalia.com

drm/v3d: Create a CPU job extension to copy timestamp query to a buffer

A CPU job is a type of job that performs operations that requires CPU
intervention. A copy timestamp query job is a job that copy the complete
or partial result of a query to a buffer. As V3D doesn't provide any
mechanism to obtain a timestamp from the GPU, it is a job that needs
CPU intervention.

So, create a user extension for the CPU job that enables the creation
of a copy timestamp query job. This user extension will allow the creation
of a CPU job that copy the results of a timestamp query to a BO with the
possibility to indicate the timestamp availability with a availability bit.

Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231130164420.932823-17-mcanal@igalia.com

drm/v3d: Create a CPU job extension for the reset timestamp job

A CPU job is a type of job that performs operations that requires CPU
intervention. A reset timestamp job is a job that resets the timestamp
queries based on the value offset of the first query. As V3D doesn't
provide any mechanism to obtain a timestamp from the GPU, it is a job
that needs CPU intervention.

So, create a user extension for the CPU job that enables the creation
of a reset timestamp job. This user extension will allow the creation of
a CPU job that resets the timestamp value in the timestamp BO and resets
the availability syncobj.

Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231130164420.932823-16-mcanal@igalia.com

drm/v3d: Create a CPU job extension for the timestamp query job

A CPU job is a type of job that performs operations that requires CPU
intervention. A timestamp query job is a job that calculates the
query timestamp and updates the query availability by signaling a
syncobj. As V3D doesn't provide any mechanism to obtain a timestamp
from the GPU, it is a job that needs CPU intervention.

So, create a user extension for the CPU job that enables the creation
of a timestamp query job. This user extension will allow the creation of
a CPU job that performs the timestamp query calculation and updates the
timestamp BO with the proper value.

Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231130164420.932823-15-mcanal@igalia.com

drm/v3d: Create a CPU job extension for a indirect CSD job

A CPU job is a type of job that performs operations that requires CPU
intervention. An indirect CSD job is a job that, when executed in the
queue, will map the indirect buffer, read the dispatch parameters, and
submit a regular dispatch. Therefore, it is a job that needs CPU
intervention.

So, create a user extension for the CPU job that enables the creation
of an indirect CSD. This user extension will allow the creation of a CSD
job linked to a CPU job. The CPU job will wait for the indirect CSD job
dependencies and, once they are signaled, it will update the CSD job
parameters.

Co-developed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231130164420.932823-14-mcanal@igalia.com

drm/v3d: Enable BO mapping

For the indirect CSD CPU job, we will need to access the internal
contents of the BO with the dispatch parameters. Therefore, create
methods to allow the mapping and unmapping of the BO.

Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231130164420.932823-13-mcanal@igalia.com

drm/v3d: Detach the CSD job BO setup

Detach CSD job setup from CSD submission ioctl to reuse it in CPU
submission ioctl for indirect CSD job.

Signed-off-by: Melissa Wen <mwen@igalia.com>
Co-developed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231130164420.932823-12-mcanal@igalia.com

drm/v3d: Create tracepoints to track the CPU job

Create tracepoints to track the three major events of a CPU job
lifetime:
1. Submission of a `v3d_submit_cpu` IOCTL
2. Beginning of the execution of a CPU job
3. Ending of the execution of a CPU job

Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231130164420.932823-11-mcanal@igalia.com