Nicholas Piggin [Fri, 2 Apr 2021 02:41:24 +0000 (12:41 +1000)]
powerpc/powernv: Enable HAIL (HV AIL) for ISA v3.1 processors
Starting with ISA v3.1, LPCR[AIL] no longer controls the interrupt
mode for HV=1 interrupts. Instead, a new LPCR[HAIL] bit is defined
which behaves like AIL=3 for HV interrupts when set.
Set HAIL on bare metal to give us mmu-on interrupts and improve
performance.
This also fixes an scv bug: we don't implement scv real mode (AIL=0)
vectors because they are at an inconvenient location, so we just
disable scv support when AIL can not be set. However powernv assumes
that LPCR[AIL] will enable AIL mode so it enables scv support despite
HV interrupts being AIL=0, which causes scv interrupts to go off into
the weeds.
Fixes:
7fa95f9adaee ("powerpc/64s: system call support for scv/rfscv instructions")
Cc: stable@vger.kernel.org # v5.9+
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210402024124.545826-1-npiggin@gmail.com
Srikar Dronamraju [Thu, 1 Apr 2021 15:42:00 +0000 (21:12 +0530)]
powerpc/smp: Set numa node before updating mask
Geethika reported a trace when doing a dlpar CPU add.
------------[ cut here ]------------
WARNING: CPU: 152 PID: 1134 at kernel/sched/topology.c:2057
CPU: 152 PID: 1134 Comm: kworker/152:1 Not tainted 5.12.0-rc5-master #5
Workqueue: events cpuset_hotplug_workfn
NIP:
c0000000001cfc14 LR:
c0000000001cfc10 CTR:
c0000000007e3420
REGS:
c0000034a08eb260 TRAP: 0700 Not tainted (5.12.0-rc5-master+)
MSR:
8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR:
28828422 XER:
00000020
CFAR:
c0000000001fd888 IRQMASK: 0 #012GPR00:
c0000000001cfc10
c0000034a08eb500 c000000001f35400 0000000000000027 #012GPR04:
c0000035abaa8010 c0000035abb30a00 0000000000000027 c0000035abaa8018
#012GPR08:
0000000000000023 c0000035abaaef48 00000035aa540000
c0000035a49dffe8 #012GPR12:
0000000028828424 c0000035bf1a1c80
0000000000000497 0000000000000004 #012GPR16:
c00000000347a258
0000000000000140 c00000000203d468 c000000001a1a490 #012GPR20:
c000000001f9c160 c0000034adf70920 c0000034aec9fd20 0000000100087bd3
#012GPR24:
0000000100087bd3 c0000035b3de09f8 0000000000000030
c0000035b3de09f8 #012GPR28:
0000000000000028 c00000000347a280
c0000034aefe0b00 c0000000010a2a68
NIP [
c0000000001cfc14] build_sched_domains+0x6a4/0x1500
LR [
c0000000001cfc10] build_sched_domains+0x6a0/0x1500
Call Trace:
[
c0000034a08eb500] [
c0000000001cfc10] build_sched_domains+0x6a0/0x1500 (unreliable)
[
c0000034a08eb640] [
c0000000001d1e6c] partition_sched_domains_locked+0x3ec/0x530
[
c0000034a08eb6e0] [
c0000000002936d4] rebuild_sched_domains_locked+0x524/0xbf0
[
c0000034a08eb7e0] [
c000000000296bb0] rebuild_sched_domains+0x40/0x70
[
c0000034a08eb810] [
c000000000296e74] cpuset_hotplug_workfn+0x294/0xe20
[
c0000034a08ebc30] [
c000000000178dd0] process_one_work+0x300/0x670
[
c0000034a08ebd10] [
c0000000001791b8] worker_thread+0x78/0x520
[
c0000034a08ebda0] [
c000000000185090] kthread+0x1a0/0x1b0
[
c0000034a08ebe10] [
c00000000000ccec] ret_from_kernel_thread+0x5c/0x70
Instruction dump:
7d2903a6 4e800421 e8410018 7f67db78 7fe6fb78 7f45d378 7f84e378 7c681b78
3c62ff1a 3863c6f8 4802dc35 60000000 <
0fe00000>
3920fff4 f9210070 e86100a0
---[ end trace
532d9066d3d4d7ec ]---
Some of the per-CPU masks use cpu_cpu_mask as a filter to limit the search
for related CPUs. On a dlpar add of a CPU, update cpu_cpu_mask before
updating the per-CPU masks. This will ensure the cpu_cpu_mask is updated
correctly before its used in setting the masks. Setting the numa_node will
ensure that when cpu_cpu_mask() gets called, the correct node number is
used. This code movement helped fix the above call trace.
Reported-by: Geetika Moolchandani <Geetika.Moolchandani1@ibm.com>
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210401154200.150077-1-srikar@linux.vnet.ibm.com
Xiongwei Song [Wed, 14 Apr 2021 11:00:33 +0000 (19:00 +0800)]
powerpc/traps: Enhance readability for trap types
Define macros to list ppc interrupt types in interttupt.h, replace the
reference of the trap hex values with these macros.
Referred the hex numbers in arch/powerpc/kernel/exceptions-64e.S,
arch/powerpc/kernel/exceptions-64s.S, arch/powerpc/kernel/head_*.S,
arch/powerpc/kernel/head_booke.h and arch/powerpc/include/asm/kvm_asm.h.
Signed-off-by: Xiongwei Song <sxwjean@gmail.com>
[mpe: Resolve conflicts in nmi_disables_ftrace(), fix 40x build]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1618398033-13025-1-git-send-email-sxwjean@me.com
Tony Ambardar [Thu, 17 Sep 2020 13:54:37 +0000 (06:54 -0700)]
powerpc: fix EDEADLOCK redefinition error in uapi/asm/errno.h
A few archs like powerpc have different errno.h values for macros
EDEADLOCK and EDEADLK. In code including both libc and linux versions of
errno.h, this can result in multiple definitions of EDEADLOCK in the
include chain. Definitions to the same value (e.g. seen with mips) do
not raise warnings, but on powerpc there are redefinitions changing the
value, which raise warnings and errors (if using "-Werror").
Guard against these redefinitions to avoid build errors like the following,
first seen cross-compiling libbpf v5.8.9 for powerpc using GCC 8.4.0 with
musl 1.1.24:
In file included from ../../arch/powerpc/include/uapi/asm/errno.h:5,
from ../../include/linux/err.h:8,
from libbpf.c:29:
../../include/uapi/asm-generic/errno.h:40: error: "EDEADLOCK" redefined [-Werror]
#define EDEADLOCK EDEADLK
In file included from toolchain-powerpc_8540_gcc-8.4.0_musl/include/errno.h:10,
from libbpf.c:26:
toolchain-powerpc_8540_gcc-8.4.0_musl/include/bits/errno.h:58: note: this is the location of the previous definition
#define EDEADLOCK 58
cc1: all warnings being treated as errors
Cc: Stable <stable@vger.kernel.org>
Reported-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Tony Ambardar <Tony.Ambardar@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200917135437.1238787-1-Tony.Ambardar@gmail.com
Srikar Dronamraju [Thu, 15 Apr 2021 12:09:34 +0000 (17:39 +0530)]
powerpc/smp: Cache CPU to chip lookup
On systems with large CPUs per node, even with the filtered matching of
related CPUs, there can be large number of calls to cpu_to_chip_id for
the same CPU. For example with 4096 vCPU, 1 node QEMU configuration,
with 4 threads per core, system could be see upto 1024 calls to
cpu_to_chip_id() for the same CPU. On a given system, cpu_to_chip_id()
for a given CPU would always return the same. Hence cache the result in
a lookup table for use in subsequent calls.
Since all CPUs sharing the same core will belong to the same chip, the
lookup_table has an entry for one CPU per core. chip_id_lookup_table is
not being freed and would be used on subsequent CPU online post CPU
offline.
Reported-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210415120934.232271-4-srikar@linux.vnet.ibm.com
Srikar Dronamraju [Thu, 15 Apr 2021 12:09:33 +0000 (17:39 +0530)]
Revert "powerpc/topology: Update topology_core_cpumask"
Now that cpu_core_mask has been reintroduced, lets revert
commit
4bce545903fa ("powerpc/topology: Update topology_core_cpumask")
Post this commit, lscpu should reflect topologies as requested by a user
when a QEMU instance is launched with NUMA spanning multiple sockets.
Reported-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210415120934.232271-3-srikar@linux.vnet.ibm.com
Srikar Dronamraju [Thu, 15 Apr 2021 12:09:32 +0000 (17:39 +0530)]
powerpc/smp: Reintroduce cpu_core_mask
Daniel reported that with Commit
4ca234a9cbd7 ("powerpc/smp: Stop
updating cpu_core_mask") QEMU was unable to set single NUMA node SMP
topologies such as:
-smp 8,maxcpus=8,cores=2,threads=2,sockets=2
i.e he expected 2 sockets in one NUMA node.
The above commit helped to reduce boot time on Large Systems for
example 4096 vCPU single socket QEMU instance. PAPR is silent on
having more than one socket within a NUMA node.
cpu_core_mask and cpu_cpu_mask for any CPU would be same unless the
number of sockets is different from the number of NUMA nodes.
One option is to reintroduce cpu_core_mask but use a slightly
different method to arrive at the cpu_core_mask. Previously each CPU's
chip-id would be compared with all other CPU's chip-id to verify if
both the CPUs were related at the chip level. Now if a CPU 'A' is
found related / (unrelated) to another CPU 'B', all the thread
siblings of 'A' and thread siblings of 'B' are automatically marked as
related / (unrelated).
Also if a platform doesn't support ibm,chip-id property, i.e its
cpu_to_chip_id returns -1, cpu_core_map holds a copy of
cpu_cpu_mask().
Fixes:
4ca234a9cbd7 ("powerpc/smp: Stop updating cpu_core_mask")
Reported-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210415120934.232271-2-srikar@linux.vnet.ibm.com
Cédric Le Goater [Tue, 13 Apr 2021 13:03:52 +0000 (15:03 +0200)]
powerpc/xive: Use the "ibm, chip-id" property only under PowerNV
The 'chip_id' field of the XIVE CPU structure is used to choose a
target for a source located on the same chip. For that, the XIVE
driver queries the chip identifier from the "ibm,chip-id" property
and compares it to a 'src_chip' field identifying the chip of a
source. This information is only available on the PowerNV platform,
'src_chip' being assigned to XIVE_INVALID_CHIP_ID under pSeries.
The "ibm,chip-id" property is also not available on all platforms. It
was first introduced on PowerNV and later, under QEMU for pSeries/KVM.
However, the property is not part of PAPR and does not exist under
pSeries/PowerVM.
Assign 'chip_id' to XIVE_INVALID_CHIP_ID by default and let the
PowerNV platform override the value with the "ibm,chip-id" property.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210413130352.1183267-1-clg@kaod.org
Tyrel Datwyler [Thu, 11 Feb 2021 18:24:35 +0000 (12:24 -0600)]
powerpc/pseries: extract host bridge from pci_bus prior to bus removal
The pci_bus->bridge reference may no longer be valid after
pci_bus_remove() resulting in passing a bad value to device_unregister()
for the associated bridge device.
Store the host_bridge reference in a separate variable prior to
pci_bus_remove().
Fixes:
7340056567e3 ("powerpc/pci: Reorder pci bus/bridge unregistration during PHB removal")
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210211182435.47968-1-tyreld@linux.ibm.com
Michael Ellerman [Fri, 16 Apr 2021 11:38:04 +0000 (21:38 +1000)]
macintosh/via-pmu: Fix build warning
Now that __fake_sleep is static, we get a warning about it being unused
in some configurations:
drivers/macintosh/via-pmu.c:190:12: warning: '__fake_sleep' defined but not used
190 | static int __fake_sleep;
Move it inside the ifdef where it's used to avoid the warning.
Fixes:
95d143923379 ("macintosh/via-pmu: Make some symbols static")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210416114139.772236-1-mpe@ellerman.id.au
Michael Ellerman [Fri, 16 Apr 2021 11:07:06 +0000 (21:07 +1000)]
powerpc/papr_scm: Fix build error due to wrong printf specifier
When I changed the rc variable to be long rather than int64_t I
neglected to update the printk(), leading to a build break:
arch/powerpc/platforms/pseries/papr_scm.c: In function 'papr_scm_pmem_flush':
arch/powerpc/platforms/pseries/papr_scm.c:144:26: warning: format
'%lld' expects argument of type 'long long int', but argument 3 has
type 'long int' [-Wformat=]
Fixes:
75b7c05ebf90 ("powerpc/papr_scm: Implement support for H_SCM_FLUSH hcall")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210416111209.765444-2-mpe@ellerman.id.au
Michael Ellerman [Fri, 16 Apr 2021 11:05:47 +0000 (21:05 +1000)]
powerpc/configs: Add PAPR_SCM to pseries_defconfig
This is a pseries only driver, it should be built by default as part of
pseries_defconfig to get some build coverage.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210416111209.765444-1-mpe@ellerman.id.au
Michael Ellerman [Tue, 13 Apr 2021 13:54:27 +0000 (23:54 +1000)]
powerpc/mm/radix: Make radix__change_memory_range() static
The lkp bot pointed out that with W=1 we get:
arch/powerpc/mm/book3s64/radix_pgtable.c:183:6: error: no previous
prototype for 'radix__change_memory_range'
Which is really saying that it could be static, make it so.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Christophe Leroy [Wed, 31 Mar 2021 16:48:47 +0000 (16:48 +0000)]
powerpc/vdso: Add support for time namespaces
This patch adds the necessary glue to provide time namespaces.
Things are mainly copied from ARM64.
__arch_get_timens_vdso_data() calculates timens vdso data position
based on the vdso data position, knowing it is the next page in vvar.
This avoids having to redo the mflr/bcl/mflr/mtlr dance to locate
the page relative to running code position.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> # vDSO parts
Acked-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1a15495f80ec19a87b16cf874dbf7c3fa5ec40fe.1617209142.git.christophe.leroy@csgroup.eu
Dmitry Safonov [Wed, 31 Mar 2021 16:48:46 +0000 (16:48 +0000)]
powerpc/vdso: Separate vvar vma from vdso
Since commit
511157ab641e ("powerpc/vdso: Move vdso datapage up front")
VVAR page is in front of the VDSO area. In result it breaks CRIU
(Checkpoint Restore In Userspace) [1], where CRIU expects that "[vdso]"
from /proc/../maps points at ELF/vdso image, rather than at VVAR data page.
Laurent made a patch to keep CRIU working (by reading aux vector).
But I think it still makes sence to separate two mappings into different
VMAs. It will also make ppc64 less "special" for userspace and as
a side-bonus will make VVAR page un-writable by debugger (which previously
would COW page and can be unexpected).
I opportunistically Cc stable on it: I understand that usually such
stuff isn't a stable material, but that will allow us in CRIU have
one workaround less that is needed just for one release (v5.11) on
one platform (ppc64), which we otherwise have to maintain.
I wouldn't go as far as to say that the commit
511157ab641e is ABI
regression as no other userspace got broken, but I'd really appreciate
if it gets backported to v5.11 after v5.12 is released, so as not
to complicate already non-simple CRIU-vdso code. Thanks!
[1]: https://github.com/checkpoint-restore/criu/issues/1417
Cc: stable@vger.kernel.org # v5.11
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> # vDSO parts.
Acked-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f401eb1ebc0bfc4d8f0e10dc8e525fd409eb68e2.1617209142.git.christophe.leroy@csgroup.eu
Christophe Leroy [Wed, 31 Mar 2021 16:48:45 +0000 (16:48 +0000)]
lib/vdso: Add vdso_data pointer as input to __arch_get_timens_vdso_data()
For the same reason as commit
e876f0b69dc9 ("lib/vdso: Allow
architectures to provide the vdso data pointer"), powerpc wants to
avoid calculation of relative position to code.
As the timens_vdso_data is next page to vdso_data, provide
vdso_data pointer to __arch_get_timens_vdso_data() in order
to ease the calculation on powerpc in following patches.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/539c4204b1baa77c55f758904a1ea239abbc7a5c.1617209142.git.christophe.leroy@csgroup.eu
Christophe Leroy [Wed, 31 Mar 2021 16:48:44 +0000 (16:48 +0000)]
lib/vdso: Mark do_hres_timens() and do_coarse_timens() __always_inline()
In the same spirit as commit
c966533f8c6c ("lib/vdso: Mark do_hres()
and do_coarse() as __always_inline"), mark do_hres_timens() and
do_coarse_timens() __always_inline.
The measurement below in on a non timens process, ie on the fastest path.
On powerpc32, without the patch:
clock-gettime-monotonic-raw: vdso: 1155 nsec/call
clock-gettime-monotonic-coarse: vdso: 813 nsec/call
clock-gettime-monotonic: vdso: 1076 nsec/call
With the patch:
clock-gettime-monotonic-raw: vdso: 1100 nsec/call
clock-gettime-monotonic-coarse: vdso: 667 nsec/call
clock-gettime-monotonic: vdso: 1025 nsec/call
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/90dcf45ebadfd5a07f24241551c62f619d1cb930.1617209142.git.christophe.leroy@csgroup.eu
Nicholas Piggin [Tue, 16 Mar 2021 10:42:05 +0000 (20:42 +1000)]
powerpc: move norestart trap flag to bit 0
Compact the trap flags down to use the low 4 bits of regs.trap.
A few 64e interrupt trap numbers set bit 4. Although they tended to be
trivial so it wasn't a real problem[1], it is not the right thing to do,
and confusing.
[*] E.g., 0x310 hypercall goes to unknown_exception, which prints
regs->trap directly so 0x310 will appear fine, and only the syscall
interrupt will test norestart, so it won't be confused by 0x310.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210316104206.407354-12-npiggin@gmail.com
Nicholas Piggin [Tue, 16 Mar 2021 10:42:04 +0000 (20:42 +1000)]
powerpc: remove partial register save logic
All subarchitectures always save all GPRs to pt_regs interrupt frames
now. Remove FULL_REGS and associated bits.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210316104206.407354-11-npiggin@gmail.com
Nicholas Piggin [Tue, 16 Mar 2021 10:42:03 +0000 (20:42 +1000)]
powerpc: clean up do_page_fault
search_exception_tables + __bad_page_fault can be substituted with
bad_page_fault, do_page_fault no longer needs to return a value
to asm for any sub-architecture, and __bad_page_fault can be static.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210316104206.407354-10-npiggin@gmail.com
Nicholas Piggin [Tue, 16 Mar 2021 10:42:02 +0000 (20:42 +1000)]
powerpc/64e/interrupt: handle bad_page_fault in C
With non-volatile registers saved on interrupt, bad_page_fault
can now be called by do_page_fault.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210316104206.407354-9-npiggin@gmail.com
Nicholas Piggin [Tue, 16 Mar 2021 10:42:01 +0000 (20:42 +1000)]
powerpc/64e/interrupt: Use new interrupt context tracking scheme
With the new interrupt exit code, context tracking can be managed
more precisely, so remove the last of the 64e workarounds and switch
to the new context tracking code already used by 64s.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210316104206.407354-8-npiggin@gmail.com
Nicholas Piggin [Tue, 16 Mar 2021 10:42:00 +0000 (20:42 +1000)]
powerpc/64e/interrupt: reconcile irq soft-mask state in C
Use existing 64s interrupt entry wrapper code to reconcile irqs in C.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210316104206.407354-7-npiggin@gmail.com
Nicholas Piggin [Tue, 16 Mar 2021 10:41:59 +0000 (20:41 +1000)]
powerpc/64e/interrupt: NMI save irq soft-mask state in C
64e non-maskable interrupts save the state of the irq soft-mask in
asm. This can be done in C in interrupt wrappers as 64s does.
I haven't been able to test this with qemu because it doesn't seem
to cause FSL bookE WDT interrupts.
This makes WatchdogException an NMI interrupt, which affects 32-bit
as well (okay, or create a new handler?)
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210316104206.407354-6-npiggin@gmail.com
Nicholas Piggin [Tue, 16 Mar 2021 10:41:58 +0000 (20:41 +1000)]
powerpc/64e/interrupt: use new interrupt return
Update the new C and asm interrupt return code to account for 64e
specifics, switch over to use it.
The now-unused old ret_from_except code, that was moved to 64e after the
64s conversion, is removed.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210316104206.407354-5-npiggin@gmail.com
Nicholas Piggin [Tue, 16 Mar 2021 10:41:57 +0000 (20:41 +1000)]
powerpc/interrupt: update common interrupt code for
This makes adjustments to 64-bit asm and common C interrupt return
code to be usable by the 64e subarchitecture.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210316104206.407354-4-npiggin@gmail.com
Nicholas Piggin [Tue, 16 Mar 2021 10:41:56 +0000 (20:41 +1000)]
powerpc/64e/interrupt: always save nvgprs on interrupt
In order to use the C interrupt return, nvgprs must always be saved.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210316104206.407354-3-npiggin@gmail.com
Nicholas Piggin [Tue, 16 Mar 2021 10:41:55 +0000 (20:41 +1000)]
powerpc/syscall: switch user_exit_irqoff and trace_hardirqs_off order
user_exit_irqoff() -> __context_tracking_exit -> vtime_user_exit
warns in __seqprop_assert due to lockdep thinking preemption is enabled
because trace_hardirqs_off() has not yet been called.
Switch the order of these two calls, which matches their ordering in
interrupt_enter_prepare.
Fixes:
5f0b6ac3905f ("powerpc/64/syscall: Reconcile interrupts")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210316104206.407354-2-npiggin@gmail.com
Madhavan Srinivasan [Thu, 8 Apr 2021 07:45:03 +0000 (13:15 +0530)]
powerpc/perf: Infrastructure to support checking of attr.config*
Introduce code to support the checking of attr.config* for
values which are reserved for a given platform.
Performance Monitoring Unit (PMU) configuration registers
have fields that are reserved and some specific values for
bit fields are reserved. For ex., MMCRA[61:62] is
Random Sampling Mode (SM) and value of 0b11 for this field
is reserved.
Writing non-zero or invalid values in these fields will
have unknown behaviours.
Patch adds a generic call-back function "check_attr_config"
in "struct power_pmu", to be called in event_init to
check for attr.config* values for a given platform.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210408074504.248211-1-maddy@linux.ibm.com
Pu Lehui [Thu, 8 Apr 2021 06:20:12 +0000 (14:20 +0800)]
powerpc/fadump: make symbol 'rtas_fadump_set_regval' static
Fix sparse warnings:
arch/powerpc/platforms/pseries/rtas-fadump.c:250:6: warning:
symbol 'rtas_fadump_set_regval' was not declared. Should it be static?
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210408062012.85973-1-pulehui@huawei.com
Christophe Leroy [Thu, 8 Apr 2021 15:30:33 +0000 (15:30 +0000)]
powerpc/mem: Use kmap_local_page() in flushing functions
Flushing functions don't rely on preemption being disabled, so
use kmap_local_page() instead of kmap_atomic().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b6a880ea0ec7886b51edbb4979c188be549231c0.1617895813.git.christophe.leroy@csgroup.eu
Christophe Leroy [Thu, 8 Apr 2021 15:30:32 +0000 (15:30 +0000)]
powerpc/mem: Inline flush_dcache_page()
flush_dcache_page() is only a few lines, it is worth
inlining.
ia64, csky, mips, openrisc and riscv have a similar
flush_dcache_page() and inline it.
On pmac32_defconfig, we get a small size reduction.
On ppc64_defconfig, we get a very small size increase.
In both case that's in the noise (less than 0.1%).
text data bss dec hex filename
18991155 5934744 1497624 26423523 19330e3 vmlinux64.before
18994829 5936732 1497624 26429185 1934701 vmlinux64.after
9150963 2467502 184548
11803013 b41985 vmlinux32.before
9149689 2467302 184548
11801539 b413c3 vmlinux32.after
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/21c417488b70b7629dae316539fb7bb8bdef4fdd.1617895813.git.christophe.leroy@csgroup.eu
Christophe Leroy [Thu, 8 Apr 2021 15:30:31 +0000 (15:30 +0000)]
powerpc/mem: Help GCC realise __flush_dcache_icache() flushes single pages
'And' the given page address with PAGE_MASK to help GCC.
With the patch:
00000024 <__flush_dcache_icache>:
24: 54 63 00 26 rlwinm r3,r3,0,0,19
28: 39 40 00 40 li r10,64
2c: 7c 69 1b 78 mr r9,r3
30: 7d 49 03 a6 mtctr r10
34: 7c 00 48 6c dcbst 0,r9
38: 39 29 00 20 addi r9,r9,32
3c: 7c 00 48 6c dcbst 0,r9
40: 39 29 00 20 addi r9,r9,32
44: 42 00 ff f0 bdnz 34 <__flush_dcache_icache+0x10>
48: 7c 00 04 ac hwsync
4c: 39 20 00 40 li r9,64
50: 7d 29 03 a6 mtctr r9
54: 7c 00 1f ac icbi 0,r3
58: 38 63 00 20 addi r3,r3,32
5c: 7c 00 1f ac icbi 0,r3
60: 38 63 00 20 addi r3,r3,32
64: 42 00 ff f0 bdnz 54 <__flush_dcache_icache+0x30>
68: 7c 00 04 ac hwsync
6c: 4c 00 01 2c isync
70: 4e 80 00 20 blr
Without the patch:
00000024 <__flush_dcache_icache>:
24: 54 6a 00 34 rlwinm r10,r3,0,0,26
28: 39 23 10 1f addi r9,r3,4127
2c: 7d 2a 48 50 subf r9,r10,r9
30: 55 29 d9 7f rlwinm. r9,r9,27,5,31
34: 41 82 00 94 beq c8 <__flush_dcache_icache+0xa4>
38: 71 28 00 01 andi. r8,r9,1
3c: 38 c9 ff ff addi r6,r9,-1
40: 7d 48 53 78 mr r8,r10
44: 7d 27 4b 78 mr r7,r9
48: 40 82 00 6c bne b4 <__flush_dcache_icache+0x90>
4c: 54 e7 f8 7e rlwinm r7,r7,31,1,31
50: 7c e9 03 a6 mtctr r7
54: 7c 00 40 6c dcbst 0,r8
58: 39 08 00 20 addi r8,r8,32
5c: 7c 00 40 6c dcbst 0,r8
60: 39 08 00 20 addi r8,r8,32
64: 42 00 ff f0 bdnz 54 <__flush_dcache_icache+0x30>
68: 7c 00 04 ac hwsync
6c: 71 28 00 01 andi. r8,r9,1
70: 39 09 ff ff addi r8,r9,-1
74: 40 82 00 2c bne a0 <__flush_dcache_icache+0x7c>
78: 55 29 f8 7e rlwinm r9,r9,31,1,31
7c: 7d 29 03 a6 mtctr r9
80: 7c 00 57 ac icbi 0,r10
84: 39 4a 00 20 addi r10,r10,32
88: 7c 00 57 ac icbi 0,r10
8c: 39 4a 00 20 addi r10,r10,32
90: 42 00 ff f0 bdnz 80 <__flush_dcache_icache+0x5c>
94: 7c 00 04 ac hwsync
98: 4c 00 01 2c isync
9c: 4e 80 00 20 blr
a0: 7c 00 57 ac icbi 0,r10
a4: 2c 08 00 00 cmpwi r8,0
a8: 39 4a 00 20 addi r10,r10,32
ac: 40 82 ff cc bne 78 <__flush_dcache_icache+0x54>
b0: 4b ff ff e4 b 94 <__flush_dcache_icache+0x70>
b4: 7c 00 50 6c dcbst 0,r10
b8: 2c 06 00 00 cmpwi r6,0
bc: 39 0a 00 20 addi r8,r10,32
c0: 40 82 ff 8c bne 4c <__flush_dcache_icache+0x28>
c4: 4b ff ff a4 b 68 <__flush_dcache_icache+0x44>
c8: 7c 00 04 ac hwsync
cc: 7c 00 04 ac hwsync
d0: 4c 00 01 2c isync
d4: 4e 80 00 20 blr
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/23030822ea5cd0a122948b10226abe56602dc027.1617895813.git.christophe.leroy@csgroup.eu
Christophe Leroy [Thu, 8 Apr 2021 15:30:30 +0000 (15:30 +0000)]
powerpc/mem: flush_dcache_icache_phys() is for HIGHMEM pages only
__flush_dcache_icache() is usable for non HIGHMEM pages on
every platform.
It is only for HIGHMEM pages that BOOKE needs kmap() and
BOOK3S needs flush_dcache_icache_phys().
So make flush_dcache_icache_phys() dependent on CONFIG_HIGHMEM and
call it only when it is a HIGHMEM page.
We could make flush_dcache_icache_phys() available at all time,
but as it is declared NOKPROBE_SYMBOL(), GCC doesn't optimise
it out when it is not used.
So define a stub for !CONFIG_HIGHMEM in order to remove the #ifdef in
flush_dcache_icache_page() and use IS_ENABLED() instead.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/79ed5d7914f497cd5fcd681ca2f4d50a91719455.1617895813.git.christophe.leroy@csgroup.eu
Christophe Leroy [Thu, 8 Apr 2021 15:30:29 +0000 (15:30 +0000)]
powerpc/mem: Optimise flush_dcache_icache_hugepage()
flush_dcache_icache_hugepage() is a static function, with
only one caller. That caller calls it when PageCompound() is true,
so bugging on !PageCompound() is useless if we can trust the
compiler a little. Remove the BUG_ON(!PageCompound()).
The number of elements of a page won't change over time, but
GCC doesn't know about it, so it gets the value at every iteration.
To avoid that, call compound_nr() outside the loop and save it in
a local variable.
Whether the page is a HIGHMEM page or not doesn't change over time.
But GCC doesn't know it so it does the test on every iteration.
Do the test outside the loop.
When the page is not a HIGHMEM page, page_address() will fallback on
lowmem_page_address(), so call lowmem_page_address() directly and
don't suffer the call to page_address() on every iteration.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ab03712b70105fccfceef095aa03007de9295a40.1617895813.git.christophe.leroy@csgroup.eu
Christophe Leroy [Thu, 8 Apr 2021 15:30:28 +0000 (15:30 +0000)]
powerpc/mem: Call flush_coherent_icache() at higher level
flush_coherent_icache() doesn't need the address anymore,
so it can be called immediately when entering the public
functions and doesn't need to be disseminated among
lower level functions.
And use page_to_phys() instead of open coding the calculation
of phys address to call flush_dcache_icache_phys().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/5f063986e325d2efdd404b8f8c5f4bcbd4eb11a6.1617895813.git.christophe.leroy@csgroup.eu
Christophe Leroy [Thu, 8 Apr 2021 15:30:27 +0000 (15:30 +0000)]
powerpc/mem: Remove address argument to flush_coherent_icache()
flush_coherent_icache() can use any valid address as mentionned
by the comment.
Use PAGE_OFFSET as base address. This allows removing the
user access stuff.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/742b6360ae4f344a1c6ecfadcf3b6645f443fa7a.1617895813.git.christophe.leroy@csgroup.eu
Christophe Leroy [Thu, 8 Apr 2021 15:30:26 +0000 (15:30 +0000)]
powerpc/mem: Declare __flush_dcache_icache() static
__flush_dcache_icache() is only used in mem.c.
Move it before the functions that use it and declare it static.
And also fix the name of the parameter in the comment.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/3fa903eb5a10b2bc7d99a8c559ffdaa05452d8e0.1617895813.git.christophe.leroy@csgroup.eu
Christophe Leroy [Thu, 8 Apr 2021 15:30:24 +0000 (15:30 +0000)]
powerpc/mem: Move cache flushing functions into mm/cacheflush.c
Cache flushing functions are in the middle of completely
unrelated stuff in mm/mem.c
Create a dedicated mm/cacheflush.c for those functions.
Also cleanup the list of included headers.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7bf6f1600acad146e541a4e220940062f2e5b03d.1617895813.git.christophe.leroy@csgroup.eu
Bixuan Cui [Fri, 9 Apr 2021 06:38:55 +0000 (14:38 +0800)]
powerpc/powernv: make symbol 'mpipl_kobj' static
The sparse tool complains as follows:
arch/powerpc/platforms/powernv/opal-core.c:74:16: warning:
symbol 'mpipl_kobj' was not declared.
This symbol is not used outside of opal-core.c, so marks it static.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210409063855.57347-1-cuibixuan@huawei.com
Pu Lehui [Fri, 9 Apr 2021 07:01:51 +0000 (15:01 +0800)]
powerpc/xmon: Make symbol 'spu_inst_dump' static
Fix sparse warning:
arch/powerpc/xmon/xmon.c:4216:1: warning:
symbol 'spu_inst_dump' was not declared. Should it be static?
This symbol is not used outside of xmon.c, so make it static.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210409070151.163424-1-pulehui@huawei.com
Bixuan Cui [Fri, 9 Apr 2021 09:01:24 +0000 (17:01 +0800)]
powerpc/perf/hv-24x7: Make some symbols static
The sparse tool complains as follows:
arch/powerpc/perf/hv-24x7.c:229:1: warning:
symbol '__pcpu_scope_hv_24x7_txn_flags' was not declared. Should it be static?
arch/powerpc/perf/hv-24x7.c:230:1: warning:
symbol '__pcpu_scope_hv_24x7_txn_err' was not declared. Should it be static?
arch/powerpc/perf/hv-24x7.c:236:1: warning:
symbol '__pcpu_scope_hv_24x7_hw' was not declared. Should it be static?
arch/powerpc/perf/hv-24x7.c:244:1: warning:
symbol '__pcpu_scope_hv_24x7_reqb' was not declared. Should it be static?
arch/powerpc/perf/hv-24x7.c:245:1: warning:
symbol '__pcpu_scope_hv_24x7_resb' was not declared. Should it be static?
This symbol is not used outside of hv-24x7.c, so this
commit marks it static.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210409090124.59492-1-cuibixuan@huawei.com
Bixuan Cui [Fri, 9 Apr 2021 09:01:19 +0000 (17:01 +0800)]
powerpc/perf: Make symbol 'isa207_pmu_format_attr' static
The sparse tool complains as follows:
arch/powerpc/perf/isa207-common.c:24:18: warning:
symbol 'isa207_pmu_format_attr' was not declared. Should it be static?
This symbol is not used outside of isa207-common.c, so this
commit marks it static.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210409090119.59444-1-cuibixuan@huawei.com
Bixuan Cui [Fri, 9 Apr 2021 09:01:14 +0000 (17:01 +0800)]
powerpc/pseries/pmem: Make symbol 'drc_pmem_match' static
The sparse tool complains as follows:
arch/powerpc/platforms/pseries/pmem.c:142:27: warning:
symbol 'drc_pmem_match' was not declared. Should it be static?
This symbol is not used outside of pmem.c, so this
commit marks it static.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210409090114.59396-1-cuibixuan@huawei.com
Bixuan Cui [Fri, 9 Apr 2021 09:01:09 +0000 (17:01 +0800)]
powerpc/pseries: Make symbol '__pcpu_scope_hcall_stats' static
The sparse tool complains as follows:
arch/powerpc/platforms/pseries/hvCall_inst.c:29:1: warning:
symbol '__pcpu_scope_hcall_stats' was not declared. Should it be static?
This symbol is not used outside of hvCall_inst.c, so this
commit marks it static.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210409090109.59347-1-cuibixuan@huawei.com
Leonardo Bras [Thu, 8 Apr 2021 20:19:16 +0000 (17:19 -0300)]
powerpc/iommu: Enable remaining IOMMU Pagesizes present in LoPAR
According to LoPAR, ibm,query-pe-dma-window output named "IO Page Sizes"
will let the OS know all possible pagesizes that can be used for creating a
new DDW.
Currently Linux will only try using 3 of the 8 available options:
4K, 64K and 16M. According to LoPAR, Hypervisor may also offer 32M, 64M,
128M, 256M and 16G.
Enabling bigger pages would be interesting for direct mapping systems
with a lot of RAM, while using less TCE entries.
Signed-off-by: Leonardo Bras <leobras.c@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210408201915.174217-1-leobras.c@gmail.com
Masahiro Yamada [Mon, 1 Mar 2021 15:30:19 +0000 (00:30 +0900)]
powerpc/syscalls: switch to generic syscallhdr.sh
Many architectures duplicate similar shell scripts.
This commit converts powerpc to use scripts/syscallhdr.sh.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210301153019.362742-2-masahiroy@kernel.org
Masahiro Yamada [Mon, 1 Mar 2021 15:30:18 +0000 (00:30 +0900)]
powerpc/syscalls: switch to generic syscalltbl.sh
Many architectures duplicate similar shell scripts.
This commit converts powerpc to use scripts/syscalltbl.sh. This also
unifies syscall_table_32.h and syscall_table_c32.h.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210301153019.362742-1-masahiroy@kernel.org
Nathan Lynch [Thu, 8 Apr 2021 14:06:30 +0000 (09:06 -0500)]
powerpc/rtas: rename RTAS_RMOBUF_MAX to RTAS_USER_REGION_SIZE
RTAS_RMOBUF_MAX doesn't actually describe a "maximum" value in any
sense. It represents the size of an area of memory set aside for user
space to use as work areas for certain RTAS calls.
Rename it to RTAS_USER_REGION_SIZE.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210408140630.205502-6-nathanl@linux.ibm.com
Nathan Lynch [Thu, 8 Apr 2021 14:06:29 +0000 (09:06 -0500)]
powerpc/rtas: move syscall filter setup into separate function
Reduce conditionally compiled sections within rtas_initialize() by
moving the filter table initialization into its own function already
guarded by CONFIG_PPC_RTAS_FILTER. No behavior change intended.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210408140630.205502-5-nathanl@linux.ibm.com
Nathan Lynch [Thu, 8 Apr 2021 14:06:28 +0000 (09:06 -0500)]
powerpc/rtas: remove ibm_suspend_me_token
There's not a compelling reason to cache the value of the token for
the ibm,suspend-me function. Just look it up when needed in the RTAS
syscall's special case for it.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210408140630.205502-4-nathanl@linux.ibm.com
Nathan Lynch [Thu, 8 Apr 2021 14:06:27 +0000 (09:06 -0500)]
powerpc/rtas-proc: remove unused RMO_READ_BUF_MAX
This constant is unused.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210408140630.205502-3-nathanl@linux.ibm.com
Nathan Lynch [Thu, 8 Apr 2021 14:06:26 +0000 (09:06 -0500)]
powerpc/rtas: improve ppc_rtas_rmo_buf_show documentation
Add kerneldoc for ppc_rtas_rmo_buf_show(), the callback for
/proc/powerpc/rtas/rmo_buffer, explaining its expected use.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210408140630.205502-2-nathanl@linux.ibm.com
Mahesh Salgaonkar [Mon, 12 Apr 2021 07:52:50 +0000 (13:22 +0530)]
powerpc/eeh: Fix EEH handling for hugepages in ioremap space.
During the EEH MMIO error checking, the current implementation fails to map
the (virtual) MMIO address back to the pci device on radix with hugepage
mappings for I/O. This results into failure to dispatch EEH event with no
recovery even when EEH capability has been enabled on the device.
eeh_check_failure(token) # token = virtual MMIO address
addr = eeh_token_to_phys(token);
edev = eeh_addr_cache_get_dev(addr);
if (!edev)
return 0;
eeh_dev_check_failure(edev); <= Dispatch the EEH event
In case of hugepage mappings, eeh_token_to_phys() has a bug in virt -> phys
translation that results in wrong physical address, which is then passed to
eeh_addr_cache_get_dev() to match it against cached pci I/O address ranges
to get to a PCI device. Hence, it fails to find a match and the EEH event
never gets dispatched leaving the device in failed state.
The commit
33439620680be ("powerpc/eeh: Handle hugepages in ioremap space")
introduced following logic to translate virt to phys for hugepage mappings:
eeh_token_to_phys():
+ pa = pte_pfn(*ptep);
+
+ /* On radix we can do hugepage mappings for io, so handle that */
+ if (hugepage_shift) {
+ pa <<= hugepage_shift; <= This is wrong
+ pa |= token & ((1ul << hugepage_shift) - 1);
+ }
This patch fixes the virt -> phys translation in eeh_token_to_phys()
function.
$ cat /sys/kernel/debug/powerpc/eeh_address_cache
mem addr range [0x0000040080000000-0x00000400807fffff]: 0030:01:00.1
mem addr range [0x0000040080800000-0x0000040080ffffff]: 0030:01:00.1
mem addr range [0x0000040081000000-0x00000400817fffff]: 0030:01:00.0
mem addr range [0x0000040081800000-0x0000040081ffffff]: 0030:01:00.0
mem addr range [0x0000040082000000-0x000004008207ffff]: 0030:01:00.1
mem addr range [0x0000040082080000-0x00000400820fffff]: 0030:01:00.0
mem addr range [0x0000040082100000-0x000004008210ffff]: 0030:01:00.1
mem addr range [0x0000040082110000-0x000004008211ffff]: 0030:01:00.0
Above is the list of cached io address ranges of pci 0030:01:00.<fn>.
Before this patch:
Tracing 'arg1' of function eeh_addr_cache_get_dev() during error injection
clearly shows that 'addr=' contains wrong physical address:
kworker/u16:0-7 [001] .... 108.883775: eeh_addr_cache_get_dev:
(eeh_addr_cache_get_dev+0xc/0xf0) addr=0x80103000a510
dmesg shows no EEH recovery messages:
[ 108.563768] bnx2x: [bnx2x_timer:5801(eth2)]MFW seems hanged: drv_pulse (0x9ae) != mcp_pulse (0x7fff)
[ 108.563788] bnx2x: [bnx2x_hw_stats_update:870(eth2)]NIG timer max (
4294967295)
[ 108.883788] bnx2x: [bnx2x_acquire_hw_lock:2013(eth1)]lock_status 0xffffffff resource_bit 0x1
[ 108.884407] bnx2x 0030:01:00.0 eth1: MDC/MDIO access timeout
[ 108.884976] bnx2x 0030:01:00.0 eth1: MDC/MDIO access timeout
<..>
After this patch:
eeh_addr_cache_get_dev() trace shows correct physical address:
<idle>-0 [001] ..s. 1043.123828: eeh_addr_cache_get_dev:
(eeh_addr_cache_get_dev+0xc/0xf0) addr=0x40080bc7cd8
dmesg logs shows EEH recovery getting triggerred:
[ 964.323980] bnx2x: [bnx2x_timer:5801(eth2)]MFW seems hanged: drv_pulse (0x746f) != mcp_pulse (0x7fff)
[ 964.323991] EEH: Recovering PHB#30-PE#10000
[ 964.324002] EEH: PE location: N/A, PHB location: N/A
[ 964.324006] EEH: Frozen PHB#30-PE#10000 detected
<..>
Fixes:
33439620680b ("powerpc/eeh: Handle hugepages in ioremap space")
Cc: stable@vger.kernel.org # v5.3+
Reported-by: Dominic DeMarco <ddemarc@us.ibm.com>
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/161821396263.48361.2796709239866588652.stgit@jupiter
Cédric Le Goater [Wed, 31 Mar 2021 14:45:14 +0000 (16:45 +0200)]
powerpc/xive: Modernize XIVE-IPI domain with an 'alloc' handler
Instead of calling irq_create_mapping() to map the IPI for a node,
introduce an 'alloc' handler. This is usually an extension to support
hierarchy irq_domains which is not exactly the case for XIVE-IPI
domain. However, we can now use the irq_domain_alloc_irqs() routine
which allocates the IRQ descriptor on the specified node, even better
for cache performance on multi node machines.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331144514.892250-10-clg@kaod.org
Cédric Le Goater [Wed, 31 Mar 2021 14:45:13 +0000 (16:45 +0200)]
powerpc/xive: Map one IPI interrupt per node
ipistorm [*] can be used to benchmark the raw interrupt rate of an
interrupt controller by measuring the number of IPIs a system can
sustain. When applied to the XIVE interrupt controller of POWER9 and
POWER10 systems, a significant drop of the interrupt rate can be
observed when crossing the second node boundary.
This is due to the fact that a single IPI interrupt is used for all
CPUs of the system. The structure is shared and the cache line updates
impact greatly the traffic between nodes and the overall IPI
performance.
As a workaround, the impact can be reduced by deactivating the IRQ
lockup detector ("noirqdebug") which does a lot of accounting in the
Linux IRQ descriptor structure and is responsible for most of the
performance penalty.
As a fix, this proposal allocates an IPI interrupt per node, to be
shared by all CPUs of that node. It solves the scaling issue, the IRQ
lockup detector still has an impact but the XIVE interrupt rate scales
linearly. It also improves the "noirqdebug" case as showed in the
tables below.
* P9 DD2.2 - 2s * 64 threads
"noirqdebug"
Mint/s Mint/s
chips cpus IPI/sys IPI/chip IPI/chip IPI/sys
--------------------------------------------------------------
1 0-15 4.984023 4.875405 4.996536 5.048892
0-31 10.879164 10.544040 10.757632 11.037859
0-47 15.345301 14.688764 14.926520 15.310053
0-63 17.064907 17.066812 17.613416 17.874511
2 0-79 11.768764 21.650749 22.689120 22.566508
0-95 10.616812 26.878789 28.434703 28.320324
0-111 10.151693 31.397803 31.771773 32.388122
0-127 9.948502 33.139336 34.875716 35.224548
* P10 DD1 - 4s (not homogeneous) 352 threads
"noirqdebug"
Mint/s Mint/s
chips cpus IPI/sys IPI/chip IPI/chip IPI/sys
--------------------------------------------------------------
1 0-15 2.409402 2.364108 2.383303 2.395091
0-31 6.028325 6.046075 6.089999 6.073750
0-47 8.655178 8.644531 8.712830 8.724702
0-63 11.629652 11.735953 12.088203 12.055979
0-79 14.392321 14.729959 14.986701 14.973073
0-95 12.604158 13.004034 17.528748 17.568095
2 0-111 9.767753 13.719831 19.968606 20.024218
0-127 6.744566 16.418854 22.898066 22.995110
0-143 6.005699 19.174421 25.425622 25.417541
0-159 5.649719 21.938836 27.952662 28.059603
0-175 5.441410 24.109484 31.133915 31.127996
3 0-191 5.318341 24.405322 33.999221 33.775354
0-207 5.191382 26.449769 36.050161 35.867307
0-223 5.102790 29.356943 39.544135 39.508169
0-239 5.035295 31.933051 42.135075 42.071975
0-255 4.969209 34.477367 44.655395 44.757074
4 0-271 4.907652 35.887016 47.080545 47.318537
0-287 4.839581 38.076137 50.464307 50.636219
0-303 4.786031 40.881319 53.478684 53.310759
0-319 4.743750 43.448424 56.388102 55.973969
0-335 4.709936 45.623532 59.400930 58.926857
0-351 4.681413 45.646151 62.035804 61.830057
[*] https://github.com/antonblanchard/ipistorm
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331144514.892250-9-clg@kaod.org
Cédric Le Goater [Wed, 31 Mar 2021 14:45:12 +0000 (16:45 +0200)]
powerpc/xive: Fix xmon command "dxi"
When under xmon, the "dxi" command dumps the state of the XIVE
interrupts. If an interrupt number is specified, only the state of
the associated XIVE interrupt is dumped. This form of the command
lacks an irq_data parameter which is nevertheless used by
xmon_xive_get_irq_config(), leading to an xmon crash.
Fix that by doing a lookup in the system IRQ mapping to query the IRQ
descriptor data. Invalid interrupt numbers, or not belonging to the
XIVE IRQ domain, OPAL event interrupt number for instance, should be
caught by the previous query done at the firmware level.
Fixes:
97ef27507793 ("powerpc/xive: Fix xmon support on the PowerNV platform")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331144514.892250-8-clg@kaod.org
Cédric Le Goater [Wed, 31 Mar 2021 14:45:11 +0000 (16:45 +0200)]
powerpc/xive: Simplify the dump of XIVE interrupts under xmon
Move the xmon routine under XIVE subsystem and rework the loop on the
interrupts taking into account the xive_irq_domain to filter out IPIs.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331144514.892250-7-clg@kaod.org
Cédric Le Goater [Wed, 31 Mar 2021 14:45:10 +0000 (16:45 +0200)]
powerpc/xive: Drop check on irq_data in xive_core_debug_show()
When looping on IRQ descriptor, irq_data is always valid.
Fixes:
930914b7d528 ("powerpc/xive: Add a debugfs file to dump internal XIVE state")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331144514.892250-6-clg@kaod.org
Cédric Le Goater [Wed, 31 Mar 2021 14:45:09 +0000 (16:45 +0200)]
powerpc/xive: Simplify xive_core_debug_show()
Now that the IPI interrupt has its own domain, the checks on the HW
interrupt number XIVE_IPI_HW_IRQ and on the chip can be replaced by a
check on the domain.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331144514.892250-5-clg@kaod.org
Cédric Le Goater [Wed, 31 Mar 2021 14:45:08 +0000 (16:45 +0200)]
powerpc/xive: Remove useless check on XIVE_IPI_HW_IRQ
The IPI interrupt has its own domain now. Testing the HW interrupt
number is not needed anymore.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331144514.892250-4-clg@kaod.org
Cédric Le Goater [Wed, 31 Mar 2021 14:45:07 +0000 (16:45 +0200)]
powerpc/xive: Introduce an IPI interrupt domain
The IPI interrupt is a special case of the XIVE IRQ domain. When
mapping and unmapping the interrupts in the Linux interrupt number
space, the HW interrupt number 0 (XIVE_IPI_HW_IRQ) is checked to
distinguish the IPI interrupt from other interrupts of the system.
Simplify the XIVE interrupt domain by introducing a specific domain
for the IPI.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331144514.892250-3-clg@kaod.org
Yu Kuai [Wed, 7 Apr 2021 12:59:03 +0000 (20:59 +0800)]
powerpc/smp: Make some symbols static
The sparse tool complains as follows:
arch/powerpc/kernel/smp.c:86:1: warning:
symbol '__pcpu_scope_cpu_coregroup_map' was not declared. Should it be static?
arch/powerpc/kernel/smp.c:125:1: warning:
symbol '__pcpu_scope_thread_group_l1_cache_map' was not declared. Should it be static?
arch/powerpc/kernel/smp.c:132:1: warning:
symbol '__pcpu_scope_thread_group_l2_cache_map' was not declared. Should it be static?
These symbols are not used outside of smp.c, so this
commit marks them static.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210407125903.4139663-1-yukuai3@huawei.com
Yu Kuai [Wed, 7 Apr 2021 12:58:03 +0000 (20:58 +0800)]
macintosh/via-pmu: Make some symbols static
The sparse tool complains as follows:
drivers/macintosh/via-pmu.c:183:5: warning:
symbol 'pmu_cur_battery' was not declared. Should it be static?
drivers/macintosh/via-pmu.c:190:5: warning:
symbol '__fake_sleep' was not declared. Should it be static?
These symbols are not used outside of via-pmu.c, so this
commit marks them static.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210407125803.4138837-1-yukuai3@huawei.com
Yu Kuai [Wed, 7 Apr 2021 12:57:38 +0000 (20:57 +0800)]
windfarm: make symbol 'wf_thread' static
The sparse tool complains as follows:
drivers/macintosh/windfarm_core.c:59:20: warning:
symbol 'wf_thread' was not declared. Should it be static?
This symbol is not used outside of windfarm_core.c, so this
commit marks it static.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210407125738.4138480-1-yukuai3@huawei.com
Yu Kuai [Wed, 7 Apr 2021 12:57:12 +0000 (20:57 +0800)]
macintosh/windfarm: Make symbol 'pm121_sys_state' static
The sparse tool complains as follows:
drivers/macintosh/windfarm_pm121.c:436:24: warning:
symbol 'pm121_sys_state' was not declared. Should it be static?
This symbol is not used outside of windfarm_pm121.c, so this
commit marks it static.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210407125712.4138033-1-yukuai3@huawei.com
Li Huafei [Thu, 8 Apr 2021 03:58:02 +0000 (11:58 +0800)]
powerpc/mce: Make symbol 'mce_ue_event_work' static
The sparse tool complains as follows:
arch/powerpc/kernel/mce.c:43:1: warning:
symbol 'mce_ue_event_work' was not declared. Should it be static?
This symbol is not used outside of mce.c, so this commit marks it
static.
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210408035802.31853-1-lihuafei1@huawei.com
Li Huafei [Thu, 8 Apr 2021 03:39:51 +0000 (11:39 +0800)]
powerpc/security: Make symbol 'stf_barrier' static
The sparse tool complains as follows:
arch/powerpc/kernel/security.c:253:6: warning:
symbol 'stf_barrier' was not declared. Should it be static?
This symbol is not used outside of security.c, so this commit marks it
static.
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210408033951.28369-1-lihuafei1@huawei.com
Christophe Leroy [Thu, 1 Apr 2021 13:30:43 +0000 (13:30 +0000)]
powerpc/32s: Define a MODULE area below kernel text all the time
On book3s/32, the segment below kernel text is used for module
allocation when CONFIG_STRICT_KERNEL_RWX is defined.
In order to benefit from the powerpc specific module_alloc()
function which allocate modules with 32 Mbytes from
end of kernel text, use that segment below PAGE_OFFSET at all time.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a46dcdd39a9e80b012d86c294c4e5cd8d31665f3.1617283827.git.christophe.leroy@csgroup.eu
Christophe Leroy [Thu, 1 Apr 2021 13:30:42 +0000 (13:30 +0000)]
powerpc/8xx: Define a MODULE area below kernel text
On the 8xx, TASK_SIZE is 0x80000000. The space between TASK_SIZE
and PAGE_OFFSET is not used.
In order to benefit from the powerpc specific module_alloc()
function which allocate modules with 32 Mbytes from
end of kernel text, define MODULES_VADDR and MODULES_END.
Set a 256Mb area just below PAGE_OFFSET, like book3s/32.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a225606d5b3a8bc53fe612ad52c855c60b0a0a58.1617283827.git.christophe.leroy@csgroup.eu
Christophe Leroy [Thu, 1 Apr 2021 13:30:41 +0000 (13:30 +0000)]
powerpc/modules: Load modules closer to kernel text
On book3s/32, when STRICT_KERNEL_RWX is selected, modules are
allocated on the segment just before kernel text, ie on the
0xb0000000-0xbfffffff when PAGE_OFFSET is 0xc0000000.
On the 8xx, TASK_SIZE is 0x80000000. The space between TASK_SIZE and
PAGE_OFFSET is not used and could be used for modules.
The idea comes from ARM architecture.
Having modules just below PAGE_OFFSET offers an opportunity to
minimise the distance between kernel text and modules and avoid
trampolines in modules to access kernel functions or other module
functions.
When MODULES_VADDR is defined, powerpc has it's own module_alloc()
function. In that function, first try to allocate the module
above the limit defined by '_etext - 32M'. Then if the allocation
fails, fallback to the entire MODULES area.
DEBUG logs in module_32.c without the patch:
[ 1572.588822] module_32: Applying ADD relocate section 13 to 12
[ 1572.588891] module_32: Doing plt for call to 0xc00671a4 at 0xcae04024
[ 1572.588964] module_32: Initialized plt for 0xc00671a4 at
cae04000
[ 1572.589037] module_32: REL24 value =
CAE04000. location =
CAE04024
[ 1572.589110] module_32: Location before:
48000001.
[ 1572.589171] module_32: Location after:
4BFFFFDD.
[ 1572.589231] module_32: ie. jump to
03FFFFDC+
CAE04024 =
CEE04000
[ 1572.589317] module_32: Applying ADD relocate section 15 to 14
[ 1572.589386] module_32: Doing plt for call to 0xc00671a4 at 0xcadfc018
[ 1572.589457] module_32: Initialized plt for 0xc00671a4 at
cadfc000
[ 1572.589529] module_32: REL24 value =
CADFC000. location =
CADFC018
[ 1572.589601] module_32: Location before:
48000000.
[ 1572.589661] module_32: Location after:
4BFFFFE8.
[ 1572.589723] module_32: ie. jump to
03FFFFE8+
CADFC018 =
CEDFC000
With the patch:
[ 279.404671] module_32: Applying ADD relocate section 13 to 12
[ 279.404741] module_32: REL24 value =
C00671B4. location =
BF808024
[ 279.404814] module_32: Location before:
48000001.
[ 279.404874] module_32: Location after:
4885F191.
[ 279.404933] module_32: ie. jump to
0085F190+
BF808024 =
C00671B4
[ 279.405016] module_32: Applying ADD relocate section 15 to 14
[ 279.405085] module_32: REL24 value =
C00671B4. location =
BF800018
[ 279.405156] module_32: Location before:
48000000.
[ 279.405215] module_32: Location after:
4886719C.
[ 279.405275] module_32: ie. jump to
0086719C+
BF800018 =
C00671B4
We see that with the patch, no plt entries are set.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/0c3d5cb8a4dfdf6ca1b8aeb385c01470d6628d55.1617283827.git.christophe.leroy@csgroup.eu
Vaibhav Jain [Sun, 4 Apr 2021 16:31:48 +0000 (22:01 +0530)]
powerpc/mm: Add cond_resched() while removing hpte mappings
While removing large number of mappings from hash page tables for
large memory systems as soft-lockup is reported because of the time
spent inside htap_remove_mapping() like one below:
watchdog: BUG: soft lockup - CPU#8 stuck for 23s!
<snip>
NIP plpar_hcall+0x38/0x58
LR pSeries_lpar_hpte_invalidate+0x68/0xb0
Call Trace:
0x1fffffffffff000 (unreliable)
pSeries_lpar_hpte_removebolted+0x9c/0x230
hash__remove_section_mapping+0xec/0x1c0
remove_section_mapping+0x28/0x3c
arch_remove_memory+0xfc/0x150
devm_memremap_pages_release+0x180/0x2f0
devm_action_release+0x30/0x50
release_nodes+0x28c/0x300
device_release_driver_internal+0x16c/0x280
unbind_store+0x124/0x170
drv_attr_store+0x44/0x60
sysfs_kf_write+0x64/0x90
kernfs_fop_write+0x1b0/0x290
__vfs_write+0x3c/0x70
vfs_write+0xd4/0x270
ksys_write+0xdc/0x130
system_call+0x5c/0x70
Fix this by adding a cond_resched() to the loop in
htap_remove_mapping() that issues hcall to remove hpte mapping. The
call to cond_resched() is issued every HZ jiffies which should prevent
the soft-lockup from being reported.
Suggested-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210404163148.321346-1-vaibhav@linux.ibm.com
Shivaprasad G Bhat [Mon, 29 Mar 2021 17:36:43 +0000 (13:36 -0400)]
powerpc/papr_scm: Implement support for H_SCM_FLUSH hcall
Add support for ND_REGION_ASYNC capability if the device tree
indicates 'ibm,hcall-flush-required' property in the NVDIMM node.
Flush is done by issuing H_SCM_FLUSH hcall to the hypervisor.
If the flush request failed, the hypervisor is expected to
to reflect the problem in the subsequent nvdimm H_SCM_HEALTH call.
This patch prevents mmap of namespaces with MAP_SYNC flag if the
nvdimm requires an explicit flush[1].
References:
[1] https://github.com/avocado-framework-tests/avocado-misc-tests/blob/master/memory/ndctl.py.data/map_sync.c
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
[mpe: Use unsigned long / long instead of uint64_t/int64_t]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/161703936121.36.7260632399582101498.stgit@e1fbed493c87
Christophe Leroy [Sun, 11 Apr 2021 16:39:53 +0000 (16:39 +0000)]
powerpc/signal32: Fix build failure with CONFIG_SPE
Add missing fault exit label in unsafe_copy_from_user() in order to
avoid following build failure with CONFIG_SPE
CC arch/powerpc/kernel/signal_32.o
arch/powerpc/kernel/signal_32.c: In function 'restore_user_regs':
arch/powerpc/kernel/signal_32.c:565:36: error: macro "unsafe_copy_from_user" requires 4 arguments, but only 3 given
565 | ELF_NEVRREG * sizeof(u32));
| ^
In file included from ./include/linux/uaccess.h:11,
from ./include/linux/sched/task.h:11,
from ./include/linux/sched/signal.h:9,
from ./include/linux/rcuwait.h:6,
from ./include/linux/percpu-rwsem.h:7,
from ./include/linux/fs.h:33,
from ./include/linux/huge_mm.h:8,
from ./include/linux/mm.h:707,
from arch/powerpc/kernel/signal_32.c:17:
./arch/powerpc/include/asm/uaccess.h:428: note: macro "unsafe_copy_from_user" defined here
428 | #define unsafe_copy_from_user(d, s, l, e) \
|
arch/powerpc/kernel/signal_32.c:564:3: error: 'unsafe_copy_from_user' undeclared (first use in this function); did you mean 'raw_copy_from_user'?
564 | unsafe_copy_from_user(current->thread.evr, &sr->mc_vregs,
| ^~~~~~~~~~~~~~~~~~~~~
| raw_copy_from_user
arch/powerpc/kernel/signal_32.c:564:3: note: each undeclared identifier is reported only once for each function it appears in
make[3]: *** [arch/powerpc/kernel/signal_32.o] Error 1
Fixes:
627b72bee84d ("powerpc/signal32: Convert restore_[tm]_user_regs() to user access block")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/aad2cb1801a3cc99bc27081022925b9fc18a0dfb.1618159169.git.christophe.leroy@csgroup.eu
Christophe Leroy [Mon, 5 Apr 2021 09:57:27 +0000 (09:57 +0000)]
powerpc/32: Remove powerpc specific definition of 'ptrdiff_t'
For unknown reason, old commit
d27dfd388715 ("Import pre2.0.8")
changed 'ptrdiff_t' from 'int' to 'long'.
GCC expects it as 'int' really, and this leads to the following
warning when building KFENCE:
CC mm/kfence/report.o
In file included from ./include/linux/printk.h:7,
from ./include/linux/kernel.h:16,
from mm/kfence/report.c:10:
mm/kfence/report.c: In function 'kfence_report_error':
./include/linux/kern_levels.h:5:18: warning: format '%td' expects argument of type 'ptrdiff_t', but argument 6 has type 'long int' [-Wformat=]
5 | #define KERN_SOH "\001" /* ASCII Start Of Header */
| ^~~~~~
./include/linux/kern_levels.h:11:18: note: in expansion of macro 'KERN_SOH'
11 | #define KERN_ERR KERN_SOH "3" /* error conditions */
| ^~~~~~~~
./include/linux/printk.h:343:9: note: in expansion of macro 'KERN_ERR'
343 | printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
| ^~~~~~~~
mm/kfence/report.c:213:3: note: in expansion of macro 'pr_err'
213 | pr_err("Out-of-bounds %s at 0x%p (%luB %s of kfence-#%td):\n",
| ^~~~~~
<asm-generic/uapi/posix-types.h> defines it as 'int', and
defines 'size_t' and 'ssize_t' exactly as powerpc do, so
remove the powerpc specific definitions and fallback on
generic ones.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/e43d133bf52fa19e577f64f3a3a38cedc570377d.1617616601.git.christophe.leroy@csgroup.eu
Randy Dunlap [Sun, 4 Apr 2021 19:26:23 +0000 (12:26 -0700)]
powerpc: iommu: fix build when neither PCI or IBMVIO is set
When neither CONFIG_PCI nor CONFIG_IBMVIO is set/enabled, iommu.c has a
build error. The fault injection code is not useful in that kernel config,
so make the FAIL_IOMMU option depend on PCI || IBMVIO.
Prevents this build error (warning escalated to error):
../arch/powerpc/kernel/iommu.c:178:30: error: 'fail_iommu_bus_notifier' defined but not used [-Werror=unused-variable]
178 | static struct notifier_block fail_iommu_bus_notifier = {
Fixes:
d6b9a81b2a45 ("powerpc: IOMMU fault injection")
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210404192623.10697-1-rdunlap@infradead.org
Yang Li [Tue, 6 Apr 2021 01:33:05 +0000 (09:33 +0800)]
powerpc/pseries: remove unneeded semicolon
Eliminate the following coccicheck warning:
./arch/powerpc/platforms/pseries/lpar.c:1633:2-3: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1617672785-81372-1-git-send-email-yang.lee@linux.alibaba.com
Nicholas Piggin [Tue, 6 Apr 2021 02:55:08 +0000 (12:55 +1000)]
powerpc/64s: power4 nap fixup in C
There is no need for this to be in asm, use the new intrrupt entry wrapper.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210406025508.821718-1-npiggin@gmail.com
Athira Rajeev [Tue, 6 Apr 2021 16:16:01 +0000 (12:16 -0400)]
powerpc/perf: Fix PMU constraint check for EBB events
The power PMU group constraints includes check for EBB events to make
sure all events in a group must agree on EBB. This will prevent
scheduling EBB and non-EBB events together. But in the existing check,
settings for constraint mask and value is interchanged. Patch fixes the
same.
Before the patch, PMU selftest "cpu_event_pinned_vs_ebb_test" fails with
below in dmesg logs. This happens because EBB event gets enabled along
with a non-EBB cpu event.
[35600.453346] cpu_event_pinne[41326]: illegal instruction (4)
at
10004a18 nip
10004a18 lr
100049f8 code 1 in
cpu_event_pinned_vs_ebb_test[
10000000+10000]
Test results after the patch:
$ ./pmu/ebb/cpu_event_pinned_vs_ebb_test
test: cpu_event_pinned_vs_ebb
tags: git_version:
v5.12-rc5-93-gf28c3125acd3-dirty
Binding to cpu 8
EBB Handler is at 0x100050c8
read error on event 0x7fffe6bd4040!
PM_RUN_INST_CMPL: result 9872 running/enabled
37930432
success: cpu_event_pinned_vs_ebb
This bug was hidden by other logic until commit
1908dc911792 (perf:
Tweak perf_event_attr::exclusive semantics).
Fixes:
4df489991182 ("powerpc/perf: Add power8 EBB support")
Reported-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Mention commit
1908dc911792]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1617725761-1464-1-git-send-email-atrajeev@linux.vnet.ibm.com
Jordan Niethe [Thu, 25 Feb 2021 03:21:07 +0000 (14:21 +1100)]
selftests/powerpc: Suggest memtrace instead of /dev/mem for ci memory
The suggested alternative for getting cache-inhibited memory with 'mem='
and /dev/mem is pretty hacky. Also, PAPR guests do not allow system
memory to be mapped cache-inhibited so despite /dev/mem being available
this will not work which can cause confusion. Instead recommend using
the memtrace buffers. memtrace is only available on powernv so there
will not be any chance of trying to do this in a guest.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210225032108.1458352-2-jniethe5@gmail.com
Jordan Niethe [Thu, 25 Feb 2021 03:21:06 +0000 (14:21 +1100)]
powerpc/powernv/memtrace: Allow mmaping trace buffers
Let the memory removed from the linear mapping to be used for the trace
buffers be mmaped. This is a useful way of providing cache-inhibited
memory for the alignment_handler selftest.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
[mpe: make memtrace_mmap() static as noticed by lkp@intel.com]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210225032108.1458352-1-jniethe5@gmail.com
Michael Ellerman [Mon, 15 Mar 2021 03:41:59 +0000 (14:41 +1100)]
powerpc/kexec: Don't use .machine ppc64 in trampoline_64.S
As best as I can tell the ".machine" directive in trampoline_64.S is no
longer, or never was, necessary.
It was added in commit
0d97631392c2 ("powerpc: Add purgatory for
kexec_file_load() implementation."), which created the file based on
the kexec-tools purgatory. It may be/have-been necessary in the
kexec-tools version, but we have a completely different build system,
and we already pass the desired CPU flags, eg:
gcc ... -m64 -Wl,-a64 -mabi=elfv2 -Wa,-maltivec -Wa,-mpower4 -Wa,-many
... arch/powerpc/purgatory/trampoline_64.S
So drop the ".machine" directive and rely on the assembler flags.
Reported-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Link: https://lore.kernel.org/r/20210315034159.315675-1-mpe@ellerman.id.au
Michael Ellerman [Fri, 26 Mar 2021 10:12:01 +0000 (21:12 +1100)]
powerpc/64: Move security code into security.c
When the original spectre/meltdown mitigations were merged we put them
in setup_64.c for lack of a better place.
Since then we created security.c for some of the other mitigation
related code. But it should all be in there.
This sort of code movement can cause trouble for backports, but
hopefully this code is relatively stable these days (famous last words).
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210326101201.1973552-1-mpe@ellerman.id.au
Michael Ellerman [Wed, 31 Mar 2021 00:38:45 +0000 (11:38 +1100)]
powerpc/mm/64s: Allow STRICT_KERNEL_RWX again
We have now fixed the known bugs in STRICT_KERNEL_RWX for Book3S
64-bit Hash and Radix MMUs, see preceding commits, so allow the
option to be selected again.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331003845.216246-6-mpe@ellerman.id.au
Michael Ellerman [Wed, 31 Mar 2021 00:38:44 +0000 (11:38 +1100)]
powerpc/mm/64s/hash: Add real-mode change_memory_range() for hash LPAR
When we enabled STRICT_KERNEL_RWX we received some reports of boot
failures when using the Hash MMU and running under phyp. The crashes
are intermittent, and often exhibit as a completely unresponsive
system, or possibly an oops.
One example, which was caught in xmon:
[ 14.068327][ T1] devtmpfs: mounted
[ 14.069302][ T1] Freeing unused kernel memory: 5568K
[ 14.142060][ T347] BUG: Unable to handle kernel instruction fetch
[ 14.142063][ T1] Run /sbin/init as init process
[ 14.142074][ T347] Faulting instruction address: 0xc000000000004400
cpu 0x2: Vector: 400 (Instruction Access) at [
c00000000c7475e0]
pc:
c000000000004400: exc_virt_0x4400_instruction_access+0x0/0x80
lr:
c0000000001862d4: update_rq_clock+0x44/0x110
sp:
c00000000c747880
msr:
8000000040001031
current = 0xc00000000c60d380
paca = 0xc00000001ec9de80 irqmask: 0x03 irq_happened: 0x01
pid = 347, comm = kworker/2:1
...
enter ? for help
[
c00000000c747880]
c0000000001862d4 update_rq_clock+0x44/0x110 (unreliable)
[
c00000000c7478f0]
c000000000198794 update_blocked_averages+0xb4/0x6d0
[
c00000000c7479f0]
c000000000198e40 update_nohz_stats+0x90/0xd0
[
c00000000c747a20]
c0000000001a13b4 _nohz_idle_balance+0x164/0x390
[
c00000000c747b10]
c0000000001a1af8 newidle_balance+0x478/0x610
[
c00000000c747be0]
c0000000001a1d48 pick_next_task_fair+0x58/0x480
[
c00000000c747c40]
c000000000eaab5c __schedule+0x12c/0x950
[
c00000000c747cd0]
c000000000eab3e8 schedule+0x68/0x120
[
c00000000c747d00]
c00000000016b730 worker_thread+0x130/0x640
[
c00000000c747da0]
c000000000174d50 kthread+0x1a0/0x1b0
[
c00000000c747e10]
c00000000000e0f0 ret_from_kernel_thread+0x5c/0x6c
This shows that CPU 2, which was idle, woke up and then appears to
randomly take an instruction fault on a completely valid area of
kernel text.
The cause turns out to be the call to hash__mark_rodata_ro(), late in
boot. Due to the way we layout text and rodata, that function actually
changes the permissions for all of text and rodata to read-only plus
execute.
To do the permission change we use a hypervisor call, H_PROTECT. On
phyp that appears to be implemented by briefly removing the mapping of
the kernel text, before putting it back with the updated permissions.
If any other CPU is executing during that window, it will see spurious
faults on the kernel text and/or data, leading to crashes.
To fix it we use stop machine to collect all other CPUs, and then have
them drop into real mode (MMU off), while we change the mapping. That
way they are unaffected by the mapping temporarily disappearing.
We don't see this bug on KVM because KVM always use VPM=1, where
faults are directed to the hypervisor, and the fault will be
serialised vs the h_protect() by HPTE_V_HVLOCK.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331003845.216246-5-mpe@ellerman.id.au
Michael Ellerman [Wed, 31 Mar 2021 00:38:43 +0000 (11:38 +1100)]
powerpc/mm/64s/hash: Factor out change_memory_range()
Pull the loop calling hpte_updateboltedpp() out of
hash__change_memory_range() into a helper function. We need it to be a
separate function for the next patch.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331003845.216246-4-mpe@ellerman.id.au
Michael Ellerman [Wed, 31 Mar 2021 00:38:42 +0000 (11:38 +1100)]
powerpc/64s: Use htab_convert_pte_flags() in hash__mark_rodata_ro()
In hash__mark_rodata_ro() we pass the raw PP_RXXX value to
hash__change_memory_range(). That has the effect of setting the key to
zero, because PP_RXXX contains no key value.
Fix it by using htab_convert_pte_flags(), which knows how to convert a
pgprot into a pp value, including the key.
Fixes:
d94b827e89dc ("powerpc/book3s64/kuap: Use Key 3 for kernel mapping with hash translation")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Link: https://lore.kernel.org/r/20210331003845.216246-3-mpe@ellerman.id.au
Michael Ellerman [Wed, 31 Mar 2021 00:38:41 +0000 (11:38 +1100)]
powerpc/pseries: Add key to flags in pSeries_lpar_hpte_updateboltedpp()
The flags argument to plpar_pte_protect() (aka. H_PROTECT), includes
the key in bits 9-13, but currently we always set those bits to zero.
In the past that hasn't been a problem because we always used key 0
for the kernel, and updateboltedpp() is only used for kernel mappings.
However since commit
d94b827e89dc ("powerpc/book3s64/kuap: Use Key 3
for kernel mapping with hash translation") we are now inadvertently
changing the key (to zero) when we call plpar_pte_protect().
That hasn't broken anything because updateboltedpp() is only used for
STRICT_KERNEL_RWX, which is currently disabled on 64s due to other
bugs.
But we want to fix that, so first we need to pass the key correctly to
plpar_pte_protect(). We can't pass our newpp value directly in, we
have to convert it into the form expected by the hcall.
The hcall we're using here is H_PROTECT, which is specified in section
14.5.4.1.6 of LoPAPR v1.1.
It takes a `flags` parameter, and the description for flags says:
* flags: AVPN, pp0, pp1, pp2, key0-key4, n, and for the CMO
option: CMO Option flags as defined in Table 189‚
If you then go to the start of the parent section, 14.5.4.1, on page
405, it says:
Register Linkage (For hcall() tokens 0x04 - 0x18)
* On Call
* R3 function call token
* R4 flags (see Table 178‚ “Page Frame Table Access flags field
definition‚” on page 401)
Then you have to go to section 14.5.3, and on page 394 there is a list
of hcalls and their tokens (table 176), and there you can see that
H_PROTECT == 0x18.
Finally you can look at table 178, on page 401, where it specifies the
layout of the bits for the key:
Bit Function
-----------------
50-54 | key0-key4
Those are big-endian bit numbers, converting to normal bit numbers you
get bits 9-13, or 0x3e00.
In the kernel we have:
#define HPTE_R_KEY_HI ASM_CONST(0x3000000000000000)
#define HPTE_R_KEY_LO ASM_CONST(0x0000000000000e00)
So the LO bits of newpp are already in the right place, and the HI
bits need to be shifted down by 48.
Fixes:
d94b827e89dc ("powerpc/book3s64/kuap: Use Key 3 for kernel mapping with hash translation")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331003845.216246-2-mpe@ellerman.id.au
Michael Ellerman [Wed, 31 Mar 2021 00:38:40 +0000 (11:38 +1100)]
powerpc/mm/64s: Add _PAGE_KERNEL_ROX
In the past we had a fallback definition for _PAGE_KERNEL_ROX, but we
removed that in commit
d82fd29c5a8c ("powerpc/mm: Distribute platform
specific PAGE and PMD flags and definitions") and added definitions
for each MMU family.
However we missed adding a definition for 64s, which was not really a
bug because it's currently not used.
But we'd like to use PAGE_KERNEL_ROX in a future patch so add a
definition now.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331003845.216246-1-mpe@ellerman.id.au
Jordan Niethe [Mon, 8 Feb 2021 03:29:57 +0000 (14:29 +1100)]
selftests/powerpc: Test for spurious kernel memory faults on radix
Previously when mapping kernel memory on radix, no ptesync was
included which would periodically lead to unhandled spurious faults.
Mapping kernel memory is used when code patching with Strict RWX
enabled. As suggested by Chris Riedl, turning ftrace on and off does a
large amount of code patching so is a convenient way to see this kind
of fault.
Add a selftest to try and trigger this kind of a spurious fault. It
tests for 30 seconds which is usually long enough for the issue to
show up.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
[mpe: Rename it to better reflect what it does, rather than the symptom]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210208032957.1232102-2-jniethe5@gmail.com
Jordan Niethe [Mon, 8 Feb 2021 03:29:56 +0000 (14:29 +1100)]
powerpc/64s: Fix pte update for kernel memory on radix
When adding a PTE a ptesync is needed to order the update of the PTE
with subsequent accesses otherwise a spurious fault may be raised.
radix__set_pte_at() does not do this for performance gains. For
non-kernel memory this is not an issue as any faults of this kind are
corrected by the page fault handler. For kernel memory these faults
are not handled. The current solution is that there is a ptesync in
flush_cache_vmap() which should be called when mapping from the
vmalloc region.
However, map_kernel_page() does not call flush_cache_vmap(). This is
troublesome in particular for code patching with Strict RWX on radix.
In do_patch_instruction() the page frame that contains the instruction
to be patched is mapped and then immediately patched. With no ordering
or synchronization between setting up the PTE and writing to the page
it is possible for faults.
As the code patching is done using __put_user_asm_goto() the resulting
fault is obscured - but using a normal store instead it can be seen:
BUG: Unable to handle kernel data access on write at 0xc008000008f24a3c
Faulting instruction address: 0xc00000000008bd74
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV
Modules linked in: nop_module(PO+) [last unloaded: nop_module]
CPU: 4 PID: 757 Comm: sh Tainted: P O
5.10.0-rc5-01361-ge3c1b78c8440-dirty #43
NIP:
c00000000008bd74 LR:
c00000000008bd50 CTR:
c000000000025810
REGS:
c000000016f634a0 TRAP: 0300 Tainted: P O (
5.10.0-rc5-01361-ge3c1b78c8440-dirty)
MSR:
9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR:
44002884 XER:
00000000
CFAR:
c00000000007c68c DAR:
c008000008f24a3c DSISR:
42000000 IRQMASK: 1
This results in the kind of issue reported here:
https://lore.kernel.org/linuxppc-dev/
15AC5B0E-A221-4B8C-9039-
FA96B8EF7C88@lca.pw/
Chris Riedl suggested a reliable way to reproduce the issue:
$ mount -t debugfs none /sys/kernel/debug
$ (while true; do echo function > /sys/kernel/debug/tracing/current_tracer ; echo nop > /sys/kernel/debug/tracing/current_tracer ; done) &
Turning ftrace on and off does a large amount of code patching which
in usually less then 5min will crash giving a trace like:
ftrace-powerpc: (____ptrval____): replaced (
4b473b11) != old (
60000000)
------------[ ftrace bug ]------------
ftrace failed to modify
[<
c000000000bf8e5c>] napi_busy_loop+0xc/0x390
actual: 11:3b:47:4b
Setting ftrace call site to call ftrace function
ftrace record flags:
80000001
(1)
expected tramp:
c00000000006c96c
------------[ cut here ]------------
WARNING: CPU: 4 PID: 809 at kernel/trace/ftrace.c:2065 ftrace_bug+0x28c/0x2e8
Modules linked in: nop_module(PO-) [last unloaded: nop_module]
CPU: 4 PID: 809 Comm: sh Tainted: P O
5.10.0-rc5-01360-gf878ccaf250a #1
NIP:
c00000000024f334 LR:
c00000000024f330 CTR:
c0000000001a5af0
REGS:
c000000004c8b760 TRAP: 0700 Tainted: P O (
5.10.0-rc5-01360-gf878ccaf250a)
MSR:
900000000282b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR:
28008848 XER:
20040000
CFAR:
c0000000001a9c98 IRQMASK: 0
GPR00:
c00000000024f330 c000000004c8b9f0 c000000002770600 0000000000000022
GPR04:
00000000ffff7fff c000000004c8b6d0 0000000000000027 c0000007fe9bcdd8
GPR08:
0000000000000023 ffffffffffffffd8 0000000000000027 c000000002613118
GPR12:
0000000000008000 c0000007fffdca00 0000000000000000 0000000000000000
GPR16:
0000000023ec37c5 0000000000000000 0000000000000000 0000000000000008
GPR20:
c000000004c8bc90 c0000000027a2d20 c000000004c8bcd0 c000000002612fe8
GPR24:
0000000000000038 0000000000000030 0000000000000028 0000000000000020
GPR28:
c000000000ff1b68 c000000000bf8e5c c00000000312f700 c000000000fbb9b0
NIP ftrace_bug+0x28c/0x2e8
LR ftrace_bug+0x288/0x2e8
Call Trace:
ftrace_bug+0x288/0x2e8 (unreliable)
ftrace_modify_all_code+0x168/0x210
arch_ftrace_update_code+0x18/0x30
ftrace_run_update_code+0x44/0xc0
ftrace_startup+0xf8/0x1c0
register_ftrace_function+0x4c/0xc0
function_trace_init+0x80/0xb0
tracing_set_tracer+0x2a4/0x4f0
tracing_set_trace_write+0xd4/0x130
vfs_write+0xf0/0x330
ksys_write+0x84/0x140
system_call_exception+0x14c/0x230
system_call_common+0xf0/0x27c
To fix this when updating kernel memory PTEs using ptesync.
Fixes:
f1cb8f9beba8 ("powerpc/64s/radix: avoid ptesync after set_pte and ptep_set_access_flags")
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Tidy up change log slightly]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210208032957.1232102-1-jniethe5@gmail.com
Bhaskar Chowdhury [Wed, 20 Jan 2021 14:20:21 +0000 (19:50 +0530)]
powerpc: Spelling/typo fixes
Various spelling/typo fixes.
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Christophe Leroy [Tue, 23 Mar 2021 15:47:59 +0000 (15:47 +0000)]
powerpc: Switch to relative jump labels
Convert powerpc to relative jump labels.
Before the patch, pseries_defconfig vmlinux.o has:
9074 __jump_table
0003f2a0 0000000000000000 0000000000000000 01321fa8 2**0
With the patch, the same config gets:
9074 __jump_table
0002a0e0 0000000000000000 0000000000000000 01321fb4 2**0
Size is 258720 without the patch, 172256 with the patch.
That's a 33% size reduction.
Largely copied from commit
c296146c058c ("arm64/kernel: jump_label:
Switch to relative references")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/828348da7868eda953ce023994404dfc49603b64.1616514473.git.christophe.leroy@csgroup.eu
Christophe Leroy [Mon, 22 Mar 2021 16:37:53 +0000 (16:37 +0000)]
powerpc/bpf: Reallocate BPF registers to volatile registers when possible on PPC32
When the BPF routine doesn't call any function, the non volatile
registers can be reallocated to volatile registers in order to
avoid having to save them/restore on the stack.
Before this patch, the test #359 ADD default X is:
0: 7c 64 1b 78 mr r4,r3
4: 38 60 00 00 li r3,0
8: 94 21 ff b0 stwu r1,-80(r1)
c: 60 00 00 00 nop
10: 92 e1 00 2c stw r23,44(r1)
14: 93 01 00 30 stw r24,48(r1)
18: 93 21 00 34 stw r25,52(r1)
1c: 93 41 00 38 stw r26,56(r1)
20: 39 80 00 00 li r12,0
24: 39 60 00 00 li r11,0
28: 3b 40 00 00 li r26,0
2c: 3b 20 00 00 li r25,0
30: 7c 98 23 78 mr r24,r4
34: 7c 77 1b 78 mr r23,r3
38: 39 80 00 42 li r12,66
3c: 39 60 00 00 li r11,0
40: 7d 8c d2 14 add r12,r12,r26
44: 39 60 00 00 li r11,0
48: 7d 83 63 78 mr r3,r12
4c: 82 e1 00 2c lwz r23,44(r1)
50: 83 01 00 30 lwz r24,48(r1)
54: 83 21 00 34 lwz r25,52(r1)
58: 83 41 00 38 lwz r26,56(r1)
5c: 38 21 00 50 addi r1,r1,80
60: 4e 80 00 20 blr
After this patch, the same test has become:
0: 7c 64 1b 78 mr r4,r3
4: 38 60 00 00 li r3,0
8: 94 21 ff b0 stwu r1,-80(r1)
c: 60 00 00 00 nop
10: 39 80 00 00 li r12,0
14: 39 60 00 00 li r11,0
18: 39 00 00 00 li r8,0
1c: 38 e0 00 00 li r7,0
20: 7c 86 23 78 mr r6,r4
24: 7c 65 1b 78 mr r5,r3
28: 39 80 00 42 li r12,66
2c: 39 60 00 00 li r11,0
30: 7d 8c 42 14 add r12,r12,r8
34: 39 60 00 00 li r11,0
38: 7d 83 63 78 mr r3,r12
3c: 38 21 00 50 addi r1,r1,80
40: 4e 80 00 20 blr
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b94562d7d2bb21aec89de0c40bb3cd91054b65a2.1616430991.git.christophe.leroy@csgroup.eu
Christophe Leroy [Mon, 22 Mar 2021 16:37:52 +0000 (16:37 +0000)]
powerpc/bpf: Implement extended BPF on PPC32
Implement Extended Berkeley Packet Filter on Powerpc 32
Test result with test_bpf module:
test_bpf: Summary: 378 PASSED, 0 FAILED, [354/366 JIT'ed]
Registers mapping:
[BPF_REG_0] = r11-r12
/* function arguments */
[BPF_REG_1] = r3-r4
[BPF_REG_2] = r5-r6
[BPF_REG_3] = r7-r8
[BPF_REG_4] = r9-r10
[BPF_REG_5] = r21-r22 (Args 9 and 10 come in via the stack)
/* non volatile registers */
[BPF_REG_6] = r23-r24
[BPF_REG_7] = r25-r26
[BPF_REG_8] = r27-r28
[BPF_REG_9] = r29-r30
/* frame pointer aka BPF_REG_10 */
[BPF_REG_FP] = r17-r18
/* eBPF jit internal registers */
[BPF_REG_AX] = r19-r20
[TMP_REG] = r31
As PPC32 doesn't have a redzone in the stack, a stack frame must always
be set in order to host at least the tail count counter.
The stack frame remains for tail calls, it is set by the first callee
and freed by the last callee.
r0 is used as temporary register as much as possible. It is referenced
directly in the code in order to avoid misusing it, because some
instructions interpret it as value 0 instead of register r0
(ex: addi, addis, stw, lwz, ...)
The following operations are not implemented:
case BPF_ALU64 | BPF_DIV | BPF_X: /* dst /= src */
case BPF_ALU64 | BPF_MOD | BPF_X: /* dst %= src */
case BPF_STX | BPF_XADD | BPF_DW: /* *(u64 *)(dst + off) += src */
The following operations are only implemented for power of two constants:
case BPF_ALU64 | BPF_MOD | BPF_K: /* dst %= imm */
case BPF_ALU64 | BPF_DIV | BPF_K: /* dst /= imm */
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/61d8b149176ddf99e7d5cef0b6dc1598583ca202.1616430991.git.christophe.leroy@csgroup.eu
Christophe Leroy [Mon, 22 Mar 2021 16:37:51 +0000 (16:37 +0000)]
powerpc/asm: Add some opcodes in asm/ppc-opcode.h for PPC32 eBPF
The following opcodes will be needed for the implementation
of eBPF for PPC32. Add them in asm/ppc-opcode.h
PPC_RAW_ADDE
PPC_RAW_ADDZE
PPC_RAW_ADDME
PPC_RAW_MFLR
PPC_RAW_ADDIC
PPC_RAW_ADDIC_DOT
PPC_RAW_SUBFC
PPC_RAW_SUBFE
PPC_RAW_SUBFIC
PPC_RAW_SUBFZE
PPC_RAW_ANDIS
PPC_RAW_NOR
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f7bd573a368edd78006f8a5af508c726e7ce1ed2.1616430991.git.christophe.leroy@csgroup.eu
Christophe Leroy [Mon, 22 Mar 2021 16:37:50 +0000 (16:37 +0000)]
powerpc/bpf: Change values of SEEN_ flags
Because PPC32 will use more non volatile registers,
move SEEN_ flags to positions 0-2 which corresponds to special
registers.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/608faa1dc3ecfead649e15392abd07b00313d2ba.1616430991.git.christophe.leroy@csgroup.eu
Christophe Leroy [Mon, 22 Mar 2021 16:37:49 +0000 (16:37 +0000)]
powerpc/bpf: Move common functions into bpf_jit_comp.c
Move into bpf_jit_comp.c the functions that will remain common to
PPC64 and PPC32 when we add support of EBPF for PPC32.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/2c339d77fb168ef12b213ccddfee3cb6c8ce8ae1.1616430991.git.christophe.leroy@csgroup.eu
Christophe Leroy [Mon, 22 Mar 2021 16:37:48 +0000 (16:37 +0000)]
powerpc/bpf: Move common helpers into bpf_jit.h
Move functions bpf_flush_icache(), bpf_is_seen_register() and
bpf_set_seen_register() in order to reuse them in future
bpf_jit_comp32.c
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/28e8d5a75e64807d7e9d39a4b52658755e259f8c.1616430991.git.christophe.leroy@csgroup.eu
Christophe Leroy [Mon, 22 Mar 2021 16:37:47 +0000 (16:37 +0000)]
powerpc/bpf: Change register numbering for bpf_set/is_seen_register()
Instead of using BPF register number as input in functions
bpf_set_seen_register() and bpf_is_seen_register(), use
CPU register number directly.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/0cd2506f598e7095ea43e62dca1f472de5474a0d.1616430991.git.christophe.leroy@csgroup.eu
projects / linux-2.6-microblaze.git / log