iio: adc: sc27xx: Replace devm_add_action() followed by failure action with devm_add_action_or_reset()

devm_add_action_or_reset() is introduced as a helper function which
internally calls devm_add_action(). If devm_add_action() fails
then it will execute the action mentioned and return the error code.
This reduce source code size (avoid writing the action twice)
and reduce the likelyhood of bugs.

Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: sc27xx: Introduce local variable 'struct device *dev'

Introduce local variable 'struct device *dev' and use it instead of
dereferencing it repeatly.

Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

MAINTAINERS: add entry for plantower pms7003 driver

Add myself as a plantower pms7003 driver maintainer.

Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: chemical: pms7003: convert bindings to yaml

Convert existing device tree bindings to yaml.

Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: rtl8192*: display ESSIDs using %pE

Everywhere else in the kernel ESSIDs are printed using %pE, and I can't
see why there should be an exception here.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Link: https://lore.kernel.org/r/1562799574-13315-1-git-send-email-bfields@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: hal: Remove unneeded variable pU1Tmp

Both pu8 and pU1Tmp are of same data type u8. So replace pU1Tmp with u8.

Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Link: https://lore.kernel.org/r/20190725032325.GA16473@hari-Inspiron-1545
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: Remove unused function prototype ODM_SetAntenna()

Remove unused function prototype ODM_SetAntenna.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190725052645.2372-9-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: Replace function ODM_TXPowerTrackingCheck()

Remove function ODM_TXPowerTrackingCheck as all it does is call
odm_TXPowerTrackingCheckCE.
Rename odm_TXPowerTrackingCheckCE to ODM_TXPowerTrackingCheck to
maintain compatibility with call site.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190725052645.2372-8-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: Replace function odm_TXPowerTrackingInit()

Remove function odm_TXPowerTrackingInit as all it does is call
odm_TXPowerTrackingThermalMeterInit.
Rename odm_TXPowerTrackingThermalMeterInit to
odm_TXPowerTrackingInit to maintain compatibility with call sites.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190725052645.2372-7-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: Replace function beacon_timing_control()

Remove function beacon_timing_control as it does nothing except call
rtw_hal_bcn_related_reg_setting.
Rename rtw_hal_bcn_related_reg_setting to beacon_timing_control to
maintain compatibility with call site.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190725052645.2372-6-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: hal: Replace function rtl8723b_set_ap_wowlan_cmd()

Remove function rtl8723b_set_ap_wowlan_cmd as all it does is call
rtl8723b_set_AP_FwWoWlanRelated_cmd.
Rename rtl8723b_set_AP_FwWoWlanRelated_cmd to
rtl8723b_set_ap_wowlan_cmd to maintain compatibility with call site.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190725052645.2372-5-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: hal: Replace function rtl8723b_set_wowlan_cmd()

Remove function rtl8723b_set_wowlan_cmd as all it does is call
rtl8723b_set_FwWoWlanRelated_cmd.
Rename rtl8723b_set_FwWoWlanRelated_cmd to rtl8723b_set_wowlan_cmd to
maintain compatibility with call site.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190725052645.2372-4-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: hal: Replace function PHY_GetTxPowerIndex()

Remove function PHY_GetTxPowerIndex as it does nothing except call
PHY_GetTxPowerIndex_8723B.
Rename PHY_GetTxPowerIndex_8723B to PHY_GetTxPowerIndex to maintain
compatibility with call site.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190725052645.2372-3-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: hal: Replace function PHY_SetTxPowerIndex()

Remove function PHY_SetTxPowerIndex as it does nothing except call
PHY_SetTxPowerIndex_8723B.
Rename PHY_SetTxPowerIndex_8723B to PHY_SetTxPowerIndex to maintain
compatibility with call site.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190725052645.2372-2-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: rtw_pwrctrl: Change true/false checks

Change comparisons to true to the variable itself.
Change comparisons to false to the negation of the variable.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190725052645.2372-1-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/rtl8192u: fix indentation issue, remove extra tab

A statement is indented one level too deeply; clean this up by
removing a tab.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20190723145022.11608-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: mt7621-pci: avoid use 'err' local variable

Function 'mt7621_pcie_request_resources' is using 'err'
local variable to get value returned from 'devm_request_pci_bus_resources'
and returning after that. This is not needed at all. Instead of that
just directly return returned value by the function which is also
returning zero on success.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20190720072908.16795-1-sergio.paracuellos@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: remove set but not used variable 'payload '

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/staging/rtl8192e/rtllib_rx.c: In function rtllib_rx_InfraAdhoc:
drivers/staging/rtl8192e/rtllib_rx.c:1303:6: warning:
 variable payload set but not used [-Wunused-but-set-variable]

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190717143551.29200-1-yuehaibing@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: hal: remove redundant assignment to variable n

The variable n is being assigned a value that is never read, the
assignment is redundant and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20190723145905.13514-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: remove unused file hal_phy.c

Remove the unused file hal_phy.c. No function from this file is used
in the driver code and it is not listed in the Makefile.

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20190721175735.24173-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: core: Remove Unneeded variable ret

Remove Unneeded variable ret . Return _FAIL .

We cannot change return type of on_action_spct as its callback function.

Issue identified with coccicheck.

Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Link: https://lore.kernel.org/r/20190717180635.GA11412@hari-Inspiron-1545
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: os_dep: change return type of rtw_suspend_ap_wow

Change return type of rtw_suspend_ap_wow as its always return SUCCCESS.

Issue found with coccicheck

Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Link: https://lore.kernel.org/r/20190717175642.GA10582@hari-Inspiron-1545
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: remove set but not used variable 'cck_highpwr'

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/staging/rtl8723bs/hal/odm_HWConfig.c:
 In function odm_RxPhyStatus92CSeries_Parsing:
drivers/staging/rtl8723bs/hal/odm_HWConfig.c:92:5: warning:
 variable cck_highpwr set but not used [-Wunused-but-set-variable]

It is never used and can be removed.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190717142014.43216-1-yuehaibing@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: r8712_free_recvframe(): Change return type

Change return type of r8712_free_recvframe from int to void as it always
returns _SUCCESS and its return value is never used.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190722092341.21030-8-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: r8712_init_recvbuf(): Change return type

Change return type of r8712_init_recvbuf from int to void as it always
returned _SUCCESS and this return value was never used at any call site.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190722092341.21030-7-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: r8712_set_802_11_add_wep(): Change return values

Change call sites of r8712_set_802_11_add_wep to check for 0 and
non-zero values (e.g -EINVAL, -ENOMEM) instead of for _SUCCESS and
_FAIL.
Change return values of r8712_set_802_11_add_wep from true and false and
_SUCCESS to -EINVAL and the return value of r8712_set_key.
Change return type from u8 to int to accommodate these new return
values.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190722092341.21030-6-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: init_mp_priv(): Change return values

Change return values of init_mp_priv from _SUCCESS/_FAIL to 0/-ENOMEM
respectively.
Remove label that returns the required value and return the values
directly as they are set.
Consequently remove now-unnecessary return variable.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190722092341.21030-5-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: r8712_register_cmd_alive(): Change return values

Change return values of r8712_register_cmd_alive from _SUCCESS and _FAIL
to 0 and -EINVAL.
Change the return type of this function from sint to int.
Modify its call site to check for 0 instead of _SUCCESS.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190722092341.21030-4-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: r8712_set_key(): Change return values

Change return values of r8712_set_key from _SUCCESS and _FAIL to 0 and
-ENOMEM or -EINVAL, as the case may require.
Modify return statements and return variable accordingly.
Change return type from sint to int.
As there is only one site where the return value is used, update that
call site according to the change in the return values.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190722092341.21030-3-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: r8712_set_auth(): Change return values

Change return values of r8712_set_auth from _SUCCESS/_FAIL to 0/-ENOMEM
respectively. Modify call site accordingly. Also change return type of
the function from sint to int.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190722092341.21030-2-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: r8712_init_mlme_priv(): Change return values

Change return values of r8712_init_mlme_priv from _SUCCESS/_FAIL to
0/-ENOMEM respectively. Modify call site accordingly.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190722092341.21030-1-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: Merge memcpy + be16_to_cpus to get_unaligned_be16

Merge the combo of memcpy and be16_to_cpus.
Use get_unaligned_be16 instead.
This simplifies the code.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Link: https://lore.kernel.org/r/20190719070921.27749-1-hslester96@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: recv_linux.c: Align * on block comment

Block comments should align the * on each line.
This warning was reported by checkpatch.pl

Signed-off-by: Christian L Moreno <christianluciano.m@gmail.com>
Link: https://lore.kernel.org/r/20190716190915.30869-1-christianluciano.m@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: Merge memcpy + le32_to_cpus to get_unaligned_le32

Merge the combo use of memcpy and le32_to_cpus.
Use get_unaligned_le32 instead.
This simplifies the code.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Link: https://lore.kernel.org/r/20190725025203.8772-1-hslester96@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: daqboard2000: Remove function db2k_initialize_dac()

Remove function db2k_initialize_dac as all it does is call
db2k_dac_disarm.
Modify call site accordingly.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190725052359.2308-1-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: ion: Remove unused rbtree for ion_buffer

ion_buffer_add() insert ion_buffer into rbtree every time creating
an ion_buffer but never use it after ION reworking.
Also, buffer_lock protects only rbtree operation, remove it together.

Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com>
Cc: YJ Chiang <yj.chiang@mediatek.com>
Cc: Lecopzer Chen <lecopzer.chen@mediatek.com>
Acked-by: Laura Abbott <labbott@redhat.com>
Link: https://lore.kernel.org/r/20190712084717.12441-1-lecopzer.chen@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: mt7621-pinctrl: Add of_node_put() before return

Each iteration of for_each_compatible_node puts the previous node, but
in the case of a return from the middle of the loop, there is no put,
thus causing a memory leak. Add an of_node_put before the return.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190716055908.3183-1-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: mt7621-pci: Add of_node_put() before return

Each iteration of for_each_available_child_of_node puts the previous
node, but in the case of a return from the middle of the loop, there is
no put, thus causing a memory leak. Hence add an of_node_put before the
return in two places.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190716055944.3237-1-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: erofs: support bmap

Add erofs_bmap() to support FIBMAP ioctl on flatmode inode.

Reviewed-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Link: https://lore.kernel.org/r/20190716093256.108791-1-yuchao0@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: erofs: avoid opened loop codes

Use __GFP_NOFAIL to avoid opened loop codes in z_erofs_vle_unzip().

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Reviewed-by: Gao Xiang <gaoxiang25@huawei.com>
Link: https://lore.kernel.org/r/20190716094422.110805-1-yuchao0@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: change alignment to match parenthesis

Change indentation to match parentheses.  This complies with the Linux
kernel coding style and improves readability.

Signed-off-by: Benjamin Sherman <benjamin@bensherman.io>
Link: https://lore.kernel.org/r/20190716045754.fivh5n44bybe2uce@valkyrie-mobile.localdomain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Replace function rtl88eu_phy_rf_config()

Remove function rtl88eu_phy_rf_config as all it does is call
rtl88e_phy_rf6052_config.
Rename rtl88e_phy_rf6052_config to rtl88eu_phy_rf_config and change its
type from static to non-static to maintain compatibility with call
sites.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190712071746.2474-8-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Replace function rtl88e_phy_rf6052_config()

Remove function rtl88e_phy_rf6052_config as all it does is call
rf6052_conf_para.
Rename rf6052_conf_para to rtl88e_phy_rf6052_config to maintain
compatibility with call site.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190712071746.2474-7-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Replace function rtw_alloc_network()

Change external call site of _rtw_alloc_network to rtw_alloc_network.
Remove function rtw_alloc_network as all it does is call
_rtw_alloc_network.
Rename _rtw_alloc_network to rtw_alloc_network to maintain compatibility
with call sites. Keep its type as non-static (even though the old
rtw_alloc_network was static) as this functionality is used in other
files as well.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190712071746.2474-6-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove function rtw_modular64()

Remove function rtw_modular64 as all it does is call do_div.
Replace call to rtw_modular64 with call to do_div.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190712071746.2474-5-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove function rtw_os_indicate_scan_done()

In function rtw_indicate_scan_done, replace call to
rtw_os_indicate_scan_done with call to indicate_wx_scan_complete_event
as all that rtw_os_indicate_scan_done does is call
indicate_wx_scan_complete_event.
Remove now-unused function rtw_os_indicate_scan_done.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190712071746.2474-4-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Replace function beacon_timing_control()

Remove function beacon_timing_control as all it does is call
rtw_hal_bcn_related_reg_setting.
Rename rtw_hal_bcn_related_reg_setting to beacon_timing_control for
compatibility with call sites.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190712071746.2474-3-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: core: Remove function enable_rate_adaptive()

Remove function enable_rate_adaptive as it does nothing except call
Update_RA_Entry.
Modify call site of enable_rate_adaptive to call Update_RA_Entry
instead.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190712071746.2474-2-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: core: Replace function Set_MSR()

Change reference to Set_NETYPE0_MSR to Set_MSR.
Replace the contents of Set_MSR with the contents of Set_NETYPE0_MSR as
Set_MSR does nothing but call Set_NETYPE0_MSR.
Delete Set_NETYPE0_MSR.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190712071746.2474-1-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: core: Change return type of init_mlme_ext_priv

As init_mlme_ext_priv function always returns SUCCESS , We can change
return type from int to void.

Fixes below issue identified by coccicheck
drivers/staging/rtl8723bs/core/rtw_mlme_ext.c:464:5-8: Unneeded
variable: "res". Return "_SUCCESS" on line 492

Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Link: https://lore.kernel.org/r/20190715174618.GA8947@hari-Inspiron-1545
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: os_dep: Remove code valid only for 5GHz

As per TODO ,remove code valid only for 5 GHz(channel > 14).

Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Link: https://lore.kernel.org/r/20190714173134.GA7111@hari-Inspiron-1545
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: core: Remove code valid only for 5GHz

As per TODO ,remove code valid only for 5 GHz(channel > 14).

Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Link: https://lore.kernel.org/r/20190714172826.GA6950@hari-Inspiron-1545
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: hal: Remove code valid only for 5GHz

As per TODO ,remove code valid only for 5 GHz(channel > 14).

Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Link: https://lore.kernel.org/r/20190714172451.GA6779@hari-Inspiron-1545
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: kpc2000: kpc_spi: Remove unnecessary null check before kfree

A null check before a kfree is redundant, so remove it.
This is detected by coccinelle.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190711140726.46732-1-yuehaibing@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: remove unused definitions from hal8188e_phy_reg.h

Remove unused definitions from the file hal8188e_phy_reg.h.

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20190707165649.1558-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-dpaa2/ethsw: Add comments to ETHSW_VLAN flags

Document each ETHSW_VLAN flag with the appropriate comment.

Signed-off-by: Razvan Stefanescu <razvan.stefanescu@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/1562336836-17119-7-git-send-email-ioana.ciornei@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-dpaa2/ethsw: Add ndo_get_phys_port_name

Add the ndo_get_phys_port_name callback to the ethsw driver.

Signed-off-by: Razvan Stefanescu <razvan.stefanescu@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/1562336836-17119-5-git-send-email-ioana.ciornei@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-dpaa2/ethsw: Remove netdevice on port probing error

If the ethsw_port_init() call failed, the netdevice remains registered in
the system.

Use labels to ensure that netdevice is unregistered and freed in this case.

Signed-off-by: Razvan Stefanescu <razvan.stefanescu@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/1562336836-17119-4-git-send-email-ioana.ciornei@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-dpaa2/ethsw: Add network interface statistics

Allocate MC portal with atomic context for I/O and enable network interface
statistics for hardware counters.

Signed-off-by: Razvan Stefanescu <razvan.stefanescu@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/1562336836-17119-3-git-send-email-ioana.ciornei@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-dpaa2/ethsw: Fix setting port learning/flooding flags

ethsw_set_learning()/ethsw_set_flood() use flags parameter as an
enable/disable (1/0) indicator. Previous usage sent incorrect values.

Signed-off-by: Razvan Stefanescu <razvan.stefanescu@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/1562336836-17119-2-git-send-email-ioana.ciornei@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: use "%*pE" for serial number

Almost every user of "%*pE" in the kernel uses just bare "%*pE".  This
is the only user of "%pEhp".  I can't see why it's needed.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Link: https://lore.kernel.org/r/1562799656-13401-1-git-send-email-bfields@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: Replace function wilc_wlan_cfg_get_val()

Include wilc_wlan_cfg.h in wilc_netdev.c to enable it to call functions
in wilc_wlan_cfg.c.
Remove function wilc_wlan_cfg_get_val as all it does is call
wilc_wlan_cfg_get_wid_value in file wilc_wlan_cfg.c.
Rename function wilc_wlan_cfg_get_wid_value to wilc_wlan_cfg_get_val to
maintain compatibility with call sites (including in wilc_netdev.c).
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190712072009.2550-1-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: Replace function hfa384x_dowmem()

Remove parameters mode, cmdcb, usercb, and usercb_data from
hfa384x_dowmem as these parameters are only assigned the same constant
values (DOWAIT, NULL, NULL, NULL respectively).
Modify hfa384x_dowmem to use these constants directly. Remove check for
value of mode (as it will always be DOWAIT).
Remove function hfa384x_dowmem_wait as it does nothing except call
hfa384x_dowmem with these extra arguments.
Modify call sites of hfa384x_dowmem_wait to call hfa384x_dowmem instead.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190712062807.9361-10-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: Replace function hfa384x_dormem()

Remove parameters mode, cmdcb, usercb, and usercb_data from
hfa384x_dormem as these parameters are only assigned the same constant
values (DOWAIT, NULL, NULL, NULL respectively).
Modify hfa384x_dormem to use these constants directly. Remove check for
value of mode (as it will always be DOWAIT).
Remove function hfa384x_dormem_wait as it does nothing except call
hfa384x_dormem with these extra arguments.
Modify call sites of hfa384x_dormem_wait to call hfa384x_dormem instead.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190712062807.9361-9-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: Remove function hfa384x_docmd_wait()

As hfa384x_docmd is only called by hfa384x_docmd_wait, and
hfa384x_docmd_wait always passes 4 constant arguments (DOWAIT,
NULL, NULL, NULL) to hfa384x_docmd, these constant parameters may be
removed from hfa384x_docmd and their values used directly instead.
Remove check for one of these constant parameters of hfa384x_docmd as
it is no longer necessary.
Remove hfa384x_docmd_wait as it does nothing except call hfa384x_docmd.
Modify call sites of hfa384x_docmd_wait to call hfa384x_docmd instead.
Change type of hfa384x_docmd to inline to match type of former
hfa384x_docmd_wait.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190712062807.9361-8-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: Remove unused function hfa384x_docmd_async()

Remove unused function hfa384x_docmd_async.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190712062807.9361-7-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: Remove function hfa384x_dowmem_async()

Remove unused function hfa384x_dowmem_async.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190712062807.9361-6-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: Remove unused function hfa384x_dormem_async()

Remove unused function hfa384x_dormem_async.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190712062807.9361-5-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: Remove unused function hfa384x_dorrid_async()

Remove unused function hfa384x_dorrid_async.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190712062807.9361-4-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: Remove function hfa384x_dowrid_async()

Remove function hfa384x_dowrid_async as it does nothing except call
hfa384x_dowrid, and itself is called only once.
Move the contents of hfa384x_dowrid_async (i.e the call to
hfa384x_dowrid) to its call site.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190712062807.9361-3-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: Remove function hfa384x_dowrid_wait()

Remove inline function hfa384x_dowrid_wait as it is only called once (in
hfa384x_drvr_setconfig) and its contents are only a single line (a call
to hfa384x_dowrid).
Replace the call to hfa384x_dowrid_wait with its contents i.e the call
to hfa384x_dowrid.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190712062807.9361-2-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: Remove function hfa384x_dorrid_wait()

Remove function hfa384x_dorrid_wait as it is only called once and it
does nothing except call hfa384x_dorrid.
Move contents of hfa384x_dorrid_wait to its only call site to maintain
functionality.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190712062807.9361-1-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: dim2: Remove function dimcb_io_write()

Remove function dimcb_io_write as all it does is call writel.
Modify calls to dimcb_io_write to writel, flipping the order of the
arguments as required.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190708064145.3250-3-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: dim2: Remove function dimcb_io_read()

Remove function dimcb_io_read as it does nothing except call inbuilt
function readl.
Modify call sites accordingly.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190708064145.3250-2-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: dim2: Replace function dim_norm_ctrl_async_buffer_size()

Remove function dim_norm_ctrl_async_buffer_size as it does nothing
except call norm_ctrl_async_buffer_size.
Rename norm_ctrl_async_buffer_size to dim_norm_ctrl_async_buffer_size to
maintain compatibility with call sites of the latter.
Change type of new dim_norm_ctrl_async_buffer_size from static inline to
non-static to match the old version.
Modify only remaining call site of norm_ctrl_async_buffer_size to call
dim_norm_ctrl_async_buffer_size instead.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190708064145.3250-1-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: remove redundant assignment to variable res

The variable res is being initialized with a value that is never
read and it is being updated later with a new value. The
initialization is redundant and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20190705082554.15588-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: erofs: Remove function erofs_kill_sb()

Remove function erofs_kill_sb as all it does is call kill_block_super.
Modify references to the former to point to the latter.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Reviewed-by: Gao Xiang <gaoxiang25@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Link: https://lore.kernel.org/r/20190712071247.2357-1-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: erofs:converting all 'unsigned' to 'unsigned int'

Fixed checkpatch warnings: converting all 'unsigned' to 'unsigned int'

Signed-off-by: Pratik Shinde <pratikshinde320@gmail.com>
Reviewed-by: Gao Xiang <gaoxiang25@huawei.com>
Link: https://lore.kernel.org/r/20190715122127.13733-1-pratikshinde320@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: greybus: remove redundant assignment to variable is_empty

The variable is_empty is being initialized with a value that is never
read and it is being updated later with a new value. The
initialization is redundant and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Link: https://lore.kernel.org/r/20190704133031.28809-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: greybus: Replace function gb_i2c_device_setup()

Remove function gb_i2c_device_setup as all it does is call
gb_i2c_functionality_operation.
Rename gb_i2c_functionality_operation to gb_i2c_device_setup to maintain
compatibility with call sites.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190705131131.27354-1-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: Delete an error message for a failed memory allocation

The kfifo_alloc() failure generates enough information and doesn't need
to be accompanied by another error statement.

Signed-off-by: Keyur Patel <iamkeyur96@gmail.com>
Link: https://lore.kernel.org/r/20190714172708.5067-1-iamkeyur96@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linus 5.3-rc1

Merge tag 'devicetree-fixes-for-5.3' of git://git./linux/kernel/git/robh/linux

Pull Devicetree fixes from Rob Herring:
 "Fix several warnings/errors in validation of binding schemas"

* tag 'devicetree-fixes-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: pinctrl: stm32: Fix missing 'clocks' property in examples
  dt-bindings: iio: ad7124: Fix dtc warnings in example
  dt-bindings: iio: avia-hx711: Fix avdd-supply typo in example
  dt-bindings: pinctrl: aspeed: Fix AST2500 example errors
  dt-bindings: pinctrl: aspeed: Fix 'compatible' schema errors
  dt-bindings: riscv: Limit cpus schema to only check RiscV 'cpu' nodes
  dt-bindings: Ensure child nodes are of type 'object'

Merge branch 'work.misc' of git://git./linux/kernel/git/viro/vfs

Pull vfs documentation typo fix from Al Viro.

* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  typo fix: it's d_make_root, not d_make_inode...

Merge tag '5.3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs fixes from Steve French:
 "Two fixes for stable, one that had dependency on earlier patch in this
  merge window and can now go in, and a perf improvement in SMB3 open"

* tag '5.3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: update internal module number
  cifs: flush before set-info if we have writeable handles
  smb3: optimize open to not send query file internal info
  cifs: copy_file_range needs to strip setuid bits and update timestamps
  CIFS: fix deadlock in cached root handling

iommu/amd: fix a crash in iova_magazine_free_pfns

The commit b3aa14f02254 ("iommu: remove the mapping_error dma_map_ops
method") incorrectly changed the checking from dma_ops_alloc_iova() in
map_sg() causes a crash under memory pressure as dma_ops_alloc_iova()
never return DMA_MAPPING_ERROR on failure but 0, so the error handling
is all wrong.

   kernel BUG at drivers/iommu/iova.c:801!
    Workqueue: kblockd blk_mq_run_work_fn
    RIP: 0010:iova_magazine_free_pfns+0x7d/0xc0
    Call Trace:
     free_cpu_cached_iovas+0xbd/0x150
     alloc_iova_fast+0x8c/0xba
     dma_ops_alloc_iova.isra.6+0x65/0xa0
     map_sg+0x8c/0x2a0
     scsi_dma_map+0xc6/0x160
     pqi_aio_submit_io+0x1f6/0x440 [smartpqi]
     pqi_scsi_queue_command+0x90c/0xdd0 [smartpqi]
     scsi_queue_rq+0x79c/0x1200
     blk_mq_dispatch_rq_list+0x4dc/0xb70
     blk_mq_sched_dispatch_requests+0x249/0x310
     __blk_mq_run_hw_queue+0x128/0x200
     blk_mq_run_work_fn+0x27/0x30
     process_one_work+0x522/0xa10
     worker_thread+0x63/0x5b0
     kthread+0x1d2/0x1f0
     ret_from_fork+0x22/0x40

Fixes: b3aa14f02254 ("iommu: remove the mapping_error dma_map_ops method")
Signed-off-by: Qian Cai <cai@lca.pw>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hexagon: switch to generic version of pte allocation

The hexagon implementation pte_alloc_one(), pte_alloc_one_kernel(),
pte_free_kernel() and pte_free() is identical to the generic except of
lack of __GFP_ACCOUNT for the user PTEs allocation.

Switch hexagon to use generic version of these functions.

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'ntb-5.3' of git://github.com/jonmason/ntb

Pull NTB updates from Jon Mason:
 "New feature to add support for NTB virtual MSI interrupts, the ability
  to test and use this feature in the NTB transport layer.

  Also, bug fixes for the AMD and Switchtec drivers, as well as some
  general patches"

* tag 'ntb-5.3' of git://github.com/jonmason/ntb: (22 commits)
  NTB: Describe the ntb_msi_test client in the documentation.
  NTB: Add MSI interrupt support to ntb_transport
  NTB: Add ntb_msi_test support to ntb_test
  NTB: Introduce NTB MSI Test Client
  NTB: Introduce MSI library
  NTB: Rename ntb.c to support multiple source files in the module
  NTB: Introduce functions to calculate multi-port resource index
  NTB: Introduce helper functions to calculate logical port number
  PCI/switchtec: Add module parameter to request more interrupts
  PCI/MSI: Support allocating virtual MSI interrupts
  ntb_hw_switchtec: Fix setup MW with failure bug
  ntb_hw_switchtec: Skip unnecessary re-setup of shared memory window for crosslink case
  ntb_hw_switchtec: Remove redundant steps of switchtec_ntb_reinit_peer() function
  NTB: correct ntb_dev_ops and ntb_dev comment typos
  NTB: amd: Silence shift wrapping warning in amd_ntb_db_vector_mask()
  ntb_hw_switchtec: potential shift wrapping bug in switchtec_ntb_init_sndev()
  NTB: ntb_transport: Ensure qp->tx_mw_dma_addr is initaliazed
  NTB: ntb_hw_amd: set peer limit register
  NTB: ntb_perf: Clear stale values in doorbell and command SPAD register
  NTB: ntb_perf: Disable NTB link after clearing peer XLAT registers
  ...

typo fix: it's d_make_root, not d_make_inode...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

dt-bindings: pinctrl: stm32: Fix missing 'clocks' property in examples

Now that examples are validated against the DT schema, an error with
required 'clocks' property missing is exposed:

Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.example.dt.yaml: \
pinctrl@40020000: gpio@0: 'clocks' is a required property
Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.example.dt.yaml: \
pinctrl@50020000: gpio@1000: 'clocks' is a required property
Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.example.dt.yaml: \
pinctrl@50020000: gpio@2000: 'clocks' is a required property

Add the missing 'clocks' properties to the examples to fix the errors.

Fixes: 2c9239c125f0 ("dt-bindings: pinctrl: Convert stm32 pinctrl bindings to json-schema")
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: linux-gpio@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: iio: ad7124: Fix dtc warnings in example

With the conversion to DT schema, the examples are now compiled with
dtc. The ad7124 binding example has the following warning:

Documentation/devicetree/bindings/iio/adc/adi,ad7124.example.dts:19.11-21: \
Warning (reg_format): /example-0/adc@0:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1)

There's a default #size-cells and #address-cells values of 1 for
examples. For examples needing different values such as this one on a
SPI bus, they need to provide a SPI bus parent node.

Fixes: 26ae15e62d3c ("Convert AD7124 bindings documentation to YAML format.")

Cc: Jonathan Cameron <jic23@kernel.org>
Cc: linux-iio@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: iio: avia-hx711: Fix avdd-supply typo in example

Now that examples are validated against the DT schema, a typo in
avia-hx711 example generates a warning:

Documentation/devicetree/bindings/iio/adc/avia-hx711.example.dt.yaml: weight: 'avdd-supply' is a required property

Fix the typo.

Fixes: 5150ec3fe125 ("avia-hx711.yaml: transform DT binding to YAML")
Cc: Andreas Klinger <ak@it-klinger.de>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: linux-iio@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: pinctrl: aspeed: Fix AST2500 example errors

The schema examples are now validated against the schema itself. The
AST2500 pinctrl schema has a couple of errors:

Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.example.dt.yaml: \
example-0: $nodename:0: 'example-0' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.example.dt.yaml: \
pinctrl: aspeed,external-nodes: [[1, 2]] is too short

Fixes: 0a617de16730 ("dt-bindings: pinctrl: aspeed: Convert AST2500 bindings to json-schema")
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Joel Stanley <joel@jms.id.au>
Cc: linux-aspeed@lists.ozlabs.org
Cc: linux-gpio@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: pinctrl: aspeed: Fix 'compatible' schema errors

The Aspeed pinctl schema have errors in the 'compatible' schema:

Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml: \
properties:compatible:enum: ['aspeed', 'ast2400-pinctrl', 'aspeed', 'g4-pinctrl'] has non-unique elements
Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml: \
properties:compatible:enum: ['aspeed', 'ast2500-pinctrl', 'aspeed', 'g5-pinctrl'] has non-unique elements

Flow style sequences have to be quoted if the vales contain ','. Fix
this by using the more common one line per entry formatting.

Fixes: 0a617de16730 ("dt-bindings: pinctrl: aspeed: Convert AST2500 bindings to json-schema")
Fixes: 07457937bb5c ("dt-bindings: pinctrl: aspeed: Convert AST2400 bindings to json-schema")
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Joel Stanley <joel@jms.id.au>
Cc: linux-aspeed@lists.ozlabs.org
Cc: linux-gpio@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: riscv: Limit cpus schema to only check RiscV 'cpu' nodes

Matching on the 'cpus' node was a bad choice because the schema is
incorrectly applied to non-RiscV cpus nodes. As we now have a common cpus
schema which checks the general structure, it is also redundant to do so
in the Risc-V CPU schema.

The downside is one could conceivably mix different architecture's cpu
nodes or have typos in the compatible string. The latter problem pretty
much exists for every schema.

Acked-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: Ensure child nodes are of type 'object'

Properties which are child node definitions need to have an explict
type. Otherwise, a matching (DT) property can silently match when an
error is desired. Fix this up tree-wide. Once this is fixed, the
meta-schema will enforce this on any child node definitions.

Cc: Chen-Yu Tsai <wens@csie.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: linux-mtd@lists.infradead.org
Cc: linux-gpio@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-spi@vger.kernel.org
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

Pull more input updates from Dmitry Torokhov:

 - Apple SPI keyboard and trackpad driver for newer Macs

 - ALPS driver will ignore trackpoint-only devices to give the
   trackpoint driver a chance to handle them properly

 - another Lenovo is switched over to SMbus from PS/2

 - assorted driver fixups.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: alps - fix a mismatch between a condition check and its comment
  Input: psmouse - fix build error of multiple definition
  Input: applespi - remove set but not used variables 'sts'
  Input: add Apple SPI keyboard and trackpad driver
  Input: alps - don't handle ALPS cs19 trackpoint-only device
  Input: hyperv-keyboard - remove dependencies on PAGE_SIZE for ring buffer
  Input: adp5589 - initialize GPIO controller parent device
  Input: iforce - remove empty multiline comments
  Input: synaptics - fix misuse of strlcpy
  Input: auo-pixcir-ts - switch to using  devm_add_action_or_reset()
  Input: gtco - bounds check collection indent level
  Input: mtk-pmic-keys - add of_node_put() before return
  Input: sun4i-lradc-keys - add of_node_put() before return
  Input: synaptics - whitelist Lenovo T580 SMBus intertouch

Merge tag 'dma-mapping-5.3-1' of git://git.infradead.org/users/hch/dma-mapping

Pull dma-mapping fixes from Christoph Hellwig:
 "Fix various regressions:

   - force unencrypted dma-coherent buffers if encryption bit can't fit
     into the dma coherent mask (Tom Lendacky)

   - avoid limiting request size if swiotlb is not used (me)

   - fix swiotlb handling in dma_direct_sync_sg_for_cpu/device (Fugang
     Duan)"

* tag 'dma-mapping-5.3-1' of git://git.infradead.org/users/hch/dma-mapping:
  dma-direct: correct the physical addr in dma_direct_sync_sg_for_cpu/device
  dma-direct: only limit the mapping size if swiotlb could be used
  dma-mapping: add a dma_addressing_limited helper
  dma-direct: Force unencrypted DMA under SME for certain DMA masks

Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Thomas Gleixner:
 "A set of x86 specific fixes and updates:

   - The CR2 corruption fixes which store CR2 early in the entry code
     and hand the stored address to the fault handlers.

   - Revert a forgotten leftover of the dropped FSGSBASE series.

   - Plug a memory leak in the boot code.

   - Make the Hyper-V assist functionality robust by zeroing the shadow
     page.

   - Remove a useless check for dead processes with LDT

   - Update paravirt and VMware maintainers entries.

   - A few cleanup patches addressing various compiler warnings"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/entry/64: Prevent clobbering of saved CR2 value
  x86/hyper-v: Zero out the VP ASSIST PAGE on allocation
  x86, boot: Remove multiple copy of static function sanitize_boot_params()
  x86/boot/compressed/64: Remove unused variable
  x86/boot/efi: Remove unused variables
  x86/mm, tracing: Fix CR2 corruption
  x86/entry/64: Update comments and sanity tests for create_gap
  x86/entry/64: Simplify idtentry a little
  x86/entry/32: Simplify common_exception
  x86/paravirt: Make read_cr2() CALLEE_SAVE
  MAINTAINERS: Update PARAVIRT_OPS_INTERFACE and VMWARE_HYPERVISOR_INTERFACE
  x86/process: Delete useless check for dead process with LDT
  x86: math-emu: Hide clang warnings for 16-bit overflow
  x86/e820: Use proper booleans instead of 0/1
  x86/apic: Silence -Wtype-limits compiler warnings
  x86/mm: Free sme_early_buffer after init
  x86/boot: Fix memory leak in default_get_smp_config()
  Revert "x86/ptrace: Prevent ptrace from clearing the FS/GS selector" and fix the test

Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull perf tooling updates from Thomas Gleixner:
 "A set of perf improvements and fixes:

  perf db-export:
   - Improvements in how COMM details are exported to databases for post
     processing and use in the sql-viewer.py UI.

   - Export switch events to the database.

  BPF:
   - Bump rlimit(MEMLOCK) for 'perf test bpf' and 'perf trace', just
     like selftests/bpf/bpf_rlimit.h do, which makes errors due to
     exhaustion of this limit, which are kinda cryptic (EPERM sometimes)
     less frequent.

  perf version:
   - Fix segfault due to missing OPT_END(), noticed on PowerPC.

  perf vendor events:
   - Add JSON files for IBM s/390 machine type 8561.

  perf cs-etm (ARM):
   - Fix two cases of error returns not bing done properly: Invalid
     ERR_PTR() use and loss of propagation error codes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (28 commits)
  perf version: Fix segfault due to missing OPT_END()
  perf vendor events s390: Add JSON files for machine type 8561
  perf cs-etm: Return errcode in cs_etm__process_auxtrace_info()
  perf cs-etm: Remove errnoeous ERR_PTR() usage in cs_etm__process_auxtrace_info
  perf scripts python: export-to-postgresql.py: Export switch events
  perf scripts python: export-to-sqlite.py: Export switch events
  perf db-export: Export switch events
  perf db-export: Factor out db_export__threads()
  perf script: Add scripting operation process_switch()
  perf scripts python: exported-sql-viewer.py: Use new 'has_calls' column
  perf scripts python: exported-sql-viewer.py: Remove redundant semi-colons
  perf scripts python: export-to-postgresql.py: Add has_calls column to comms table
  perf scripts python: export-to-sqlite.py: Add has_calls column to comms table
  perf db-export: Also export thread's current comm
  perf db-export: Factor out db_export__comm()
  perf scripts python: export-to-postgresql.py: Export comm details
  perf scripts python: export-to-sqlite.py: Export comm details
  perf db-export: Export comm details
  perf db-export: Fix a white space issue in db_export__sample()
  perf db-export: Move export__comm_thread into db_export__sample()
  ...