drm: Remove drm_fbdev_cma_set_suspend()

drm_fbdev_cma_set_suspend() is not getting called from
any other places. If there is no plan to use it in future
we can remove this API.

Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180730192326.GA31354@jordon-HP-15-Notebook-PC

drm/tinydrm: Replace drm_dev_unref with drm_dev_put

This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180713134601.14391-1-tzimmermann@suse.de

drm/sti: do not remove the drm_bridge that was never added

Removing the drm_bridge_remove call should avoid a NULL dereference
during list processing in drm_bridge_remove if the error path is ever
taken.

The more natural approach would perhaps be to add a drm_bridge_add,
but there are several other bridges that never call drm_bridge_add.
Just removing the drm_bridge_remove is the easier fix.

Fixes: 84601dbdea36 ("drm: sti: rework init sequence")
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180806061910.29914-2-peda@axentia.se

drm: rcar-du: Use __drm_atomic_helper_plane_reset instead of copying the logic

A new helper function(__drm_atomic_helper_plane_reset) has been added
for linking a plane with its state and resetting the core
properties(alpha, rotation, etc.) to their default values.
Use that instead of duplicating the logic.

__drm_atomic_helper_plane_reset initializes the alpha property to its
max value, which is defined by the drm core as DRM_BLEND_ALPHA_OPAQUE,
so nothing changes regarding the alpha value.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180804161530.12275-8-alexandru-cosmin.gheorghe@arm.com

drm/sun4i: Use __drm_atomic_helper_plane_reset instead of copying the logic

A new helper function(__drm_atomic_helper_plane_reset) has been added
for linking a plane with its state and resetting the core
properties(alpha, rotation, etc.) to their default values.
Use that instead of duplicating the logic.

__drm_atomic_helper_plane_reset initializes the alpha property to its
max value, which is defined by the drm core as DRM_BLEND_ALPHA_OPAQUE,
so nothing changes regarding the alpha value.

Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180804161530.12275-9-alexandru-cosmin.gheorghe@arm.com

drm/imx: Use __drm_atomic_helper_plane_reset instead of copying the logic

A new helper function(__drm_atomic_helper_plane_reset) has been added
for linking a plane with its state and resetting the core
properties(alpha, rotation, etc.) to their default values.
Use that instead of duplicating the logic.

Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180804161530.12275-7-alexandru-cosmin.gheorghe@arm.com

drm: atmel-hlcdc: Use __drm_atomic_helper_plane_reset instead of copying the logic

A new helper function(__drm_atomic_helper_plane_reset) has been added
for linking a plane with its state and resetting the core
properties(alpha, rotation, etc.) to their default values.
Use that instead of duplicating the logic.

__drm_atomic_helper_plane_reset initializes the alpha property to its
max value, which is defined by the drm core as DRM_BLEND_ALPHA_OPAQUE,
so nothing changes regarding the alpha value.

Acked-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180804161530.12275-5-alexandru-cosmin.gheorghe@arm.com

drm: mali-dp: Use __drm_atomic_helper_plane_reset instead of copying the logic

A new helper function(__drm_atomic_helper_plane_reset) has been added
for linking a plane with its state and resetting the core
properties(alpha, rotation, etc.) to their default values.
Use that instead of duplicating the logic.

Reviewed-by: Ayan Kumar halder <ayan.halder@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180804161530.12275-4-alexandru-cosmin.gheorghe@arm.com

drm/atomic: Add __drm_atomic_helper_plane_reset

There are a lot of drivers that subclass drm_plane_state, all of them
duplicate the code that links together the plane with plane_state.

On top of that, drivers that enable core properties also have to
duplicate the code for initializing the properties to their default
values, which in all cases are the same as the defaults from core.

Change since v1:
- Make it consistent with the other helpers and require that both
  plane and state not be NULL, suggested by Boris Brezillon and
  Philipp Zabel.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180804161530.12275-2-alexandru-cosmin.gheorghe@arm.com

drm/vkms: Release pages_lock before return

Release pages_lock before return when vkms_obj->vaddr is NULL.
This patch fixes: 6c234fe37c57 ("drm/vkms: Implement CRC debugfs API").

Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180803201142.GA2206@haneenDRM

drm/vkms: Implement CRC debugfs API

This patch implement the necessary functions to compute and add CRCs
entries:

- Implement the set_crc_source() callback.
- Compute CRC using crc32 on the visible part of the framebuffer.
- Use ordered workqueue per output to compute and add CRC at the end
  of a vblank.
- Use appropriate synchronization methods since the CRC computation must
  be atomic wrt the generated vblank event for a given atomic update, by
  using spinlock across atomic_begin/atomic_flush to wrap the event
  handling code completely and match the flip event with the CRC.

Since vkms_crc_work_handle() can sleep, spinlock can't be acquired
while accessing vkms_output->primary_crc to compute CRC.
To make sure the data is updated and released without conflict with
the vkms_crc_work_handle(), the work_struct is flushed @crtc_destroy
and the data is updated before scheduling the work handle again, as
follow:

* CRC data update:
1- store vkms_crc_data {fb, src} per plane_state
2- @plane_duplicate_state -> allocate vkms_crc_data
3- during atomic commit (@atomic_update) ->
a) copy {fb, src} to plane_state->crc_data
b) get reference to fb,
3- @plane_destroy_state -> a) if (fb refcount) remove reference to fb
   b) deallocate crc_data

* Atomic Commit:
1- vkms_plane_atomic_check
2- vkms_prepare_fb -> vmap vkms_gem_obj->vaddr
3- atomic_begin -> hold crc spinlock
4- atomic_plane_update -> a) update vkms_output->primary_crc
  b) get reference to fb
5- atomic_flush -> a) send vblank event while holding event_lock
   b) release crc spinlock

* hrtimer regular callback:
1- hold crc spinlock
2- drm_crtc_handle_vblank()
3- queue vkms_crc_work_handle
4- release crc spinlock

* cleanup:
1- @cleanup_fb ->vunmap vkms_gem_obj->vaddr
2- @crtc_destroy -> flush work struct
3- @plane_destroy -> a) if (fb refcount) remove reference to fb
     b) deallocate crc_data

Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
[seanpaul fixed typo in vkms_crtc s/vblamk/vblank/]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/b948327f48c3e70ab232b4a0848ee6d033b26484.1533171495.git.hamohammed.sa@gmail.com

drm/vkms: Subclass plane state

Subclass plane state struct to enable storing driver's private
state. This patch only adds the base drm_plane_state struct and
the atomic functions that handle it.

Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/c35c512c8987a7255aac94a9eb985d2dd3e6c90d.1533171495.git.hamohammed.sa@gmail.com

drm/rockchip: vop: add px30 vop support

PX30 have vop big and vop lite, just like rk3036 and rk3126
the max input and output resolution is 1920x1080, the main
difference between the two vop is:

vop big:
    win0 support yuv and rgb format;
    win1 and win2 support rgb format;
vop lit:
    win1 support rgb format;

Signed-off-by: Sandy Huang <hjc@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1530003215-46593-3-git-send-email-hjc@rock-chips.com

dt-bindings: display: rockchip: add document for px30 vop

Add the compatible values for the px30 display controllers.

Signed-off-by: Sandy Huang <hjc@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
[added commit message]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1530003215-46593-2-git-send-email-hjc@rock-chips.com

drm/dp: add missing ')' to I2C nack debug message

 "(an unmatched left parenthesis
  creates an unresolved tension
  that will stay with you all day."
               -- Randall Munroe

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180727203331.27778-1-paulo.r.zanoni@intel.com

drm/rockchip: Convert drm_atomic_helper_suspend/resume()

convert drm_atomic_helper_suspend/resume() to use
drm_mode_config_helper_suspend/resume().

With this conversion, rockchip_drm_fb_resume() and
rockchip_drm_fb_suspend() will not be used anymore.
Both of these functions can be removed.

Also, in struct rockchip_drm_private state will not be
used anymore. So this can be removed forever.

Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Co-Developed-by: Ajit Negi <ajitn.linux@gmail.com>
[changed to Co-Developed-by, according to process/submitting-patches.rst]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180731203430.GA30136@jordon-HP-15-Notebook-PC

drm/bridge/ti-sn65dsi86: Fix implicit declaration to drm_mode_connector_attach_encoder

This function name was changed to drm_connector_attach_encoder().
Unfortunately this driver was posted on the list before that change, and
applied after

Fixes: a095f15c00e2 ("drm/bridge: add support for sn65dsi86 bridge
driver")
Cc: Sandeep Panda <spanda@codeaurora.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Reviewed-by: Sandeep Panda <spanda@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180730174225.257255-1-seanpaul@chromium.org

drm/vkms: Use new return type vm_fault_t

Use new return type vm_fault_t for fault handler.

Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180726144549.GA9434@jordon-HP-15-Notebook-PC

drm/bridge/tc358764: fix drm helper name

Recently drm_mode_connector_attach_encoder changed it's name. The change
was not noticed by bridge author, as a result gcc reports compile error
on next branch.

Fixes: f38b7cca6d0e ("drm/bridge: tc358764: Add DSI to LVDS bridge driver")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180727094859.27727-1-a.hajda@samsung.com

drm/vkms: subclass CRTC state

Subclass CRTC state struct to enable storing driver's private
state. This patch only adds the base drm_crtc_state struct and
the atomic functions that handle it.

Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1f3564a5a0a6c4410c5d383c86a572ddda4818a8.1532446182.git.hamohammed.sa@gmail.com

drm/vkms: Add atomic_helper_check_plane_state

Call atomic_helper_check_plane_state to clip plane coordinates.

Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/b8c1bfed8b5720cc4794ace41cf49af66c99a48c.1532446182.git.hamohammed.sa@gmail.com

drm/vkms: map/unmap buffers in [prepare/cleanup]_fb hooks

This patch map/unmap GEM backing memory to kernel address space
in prepare/cleanup_fb respectively and cache the virtual address
for later use.

Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/17d19f61b6539ce1b614c59762d04d816261b307.1532446182.git.hamohammed.sa@gmail.com

drm/vkms: Add functions to map/unmap GEM backing storage

This patch add the necessary functions to map/unmap GEM
backing memory to the kernel's virtual address space.

Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/4b6563ae4f4337a5fd51f872424addf64e8d59a6.1532446182.git.hamohammed.sa@gmail.com

drm/bridge/synopsys: remove commented-out flag in Makefile

Please do not comment out unneeded code.  Remove.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1532496348-11589-1-git-send-email-yamada.masahiro@socionext.com

drm/bridge: tc358764: Add DSI to LVDS bridge driver

Add a drm_bridge driver for the Toshiba TC358764 DSI to LVDS bridge.

Changes in v4:
- removed license blob,
- ordered includes,
- added error handling,
- fixed reset GPIO handling,
- added missing calls to the panel,
- custom OF graph code replaced with helpers,
- removed tc358764_poweroff from remove callback.
v5:
- fixed supply names,
- fixed broken console - added connector to fb_helper,
- added detach callback - unbinding works,
- fixed typo in error checking code,
- removed sparse bridge->encoder check - core does it already.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Maciej Purski <m.purski@samsung.com>
[ a.hajda@samsung.com: v4, v5 ]
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180725154644.25412-6-a.hajda@samsung.com

dt-bindings: tc358754: add DT bindings

The patch adds bindings to Toshiba DSI/LVDS bridge TC358764.
Bindings describe power supplies, reset gpio and video interfaces.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Maciej Purski <m.purski@samsung.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180725154644.25412-5-a.hajda@samsung.com

drm/bridge: add support for sn65dsi86 bridge driver

Add support for TI's sn65dsi86 dsi2edp bridge chip.
The chip converts DSI transmitted signal to eDP signal,
which is fed to the connected eDP panel.

This chip can be controlled via either i2c interface or
dsi interface. Currently in driver all the control registers
are being accessed through i2c interface only.
Also as of now HPD support has not been added to bridge
chip driver.

Changes in v1:
 - Split the dt-bindings and the driver support into separate patches
   (Andrzej Hajda).
 - Use of gpiod APIs to parse and configure gpios instead of obsolete ones
   (Andrzej Hajda).
 - Use macros to define the register offsets (Andrzej Hajda).

Changes in v2:
 - Separate out edp panel specific HW resource handling from bridge
   driver and create a separate edp panel drivers to handle panel
   specific mode information and HW resources (Sean Paul).
 - Replace pr_* APIs to DRM_* APIs to log error or debug information
   (Sean Paul).
 - Remove some of the unnecessary structure/variable from driver (Sean
   Paul).
 - Rename the function and structure prefix "sn65dsi86" to "ti_sn_bridge"
   (Sean Paul / Rob Herring).
 - Remove most of the hard-coding and modified the bridge init sequence
   based on current mode (Sean Paul).
 - Remove the existing function to retrieve the EDID data and
   implemented this as an i2c_adapter and use drm_get_edid() (Sean Paul).
 - Remove the dummy irq handler implementation, will add back the
   proper irq handling later (Sean Paul).
 - Capture the required enable gpios in a single array based on dt entry
   instead of having individual descriptor for each gpio (Sean Paul).

Changes in v3:
 - Remove usage of irq_gpio and replace it as "interrupts" property (Rob
   Herring).
 - Remove the unnecessary header file inclusions (Sean Paul).
 - Rearrange the header files in alphabetical order (Sean Paul).
 - Use regmap interface to perform i2c transactions.
 - Update Copyright/License field and address other review comments
   (Jordan Crouse).

Changes in v4:
 - Update License/Copyright (Sean Paul).
 - Add Kconfig and Makefile changes (Sean Paul).
 - Drop i2c gpio handling from this bridge driver, since i2c sda/scl gpios
   will be handled by i2c master.
 - Update required supplies names.
 - Remove unnecessary goto statements (Sean Paul).
 - Add mutex lock to power_ctrl API to avoid race conditions (Sean
   Paul).
 - Add support to parse reference clk frequency from dt(optional).
 - Update the bridge chip enable/disable sequence.

Changes in v5:
 - Fixed Kbuild test service reported warnings.

Changes in v6:
 - Use PM runtime based ref-counting instead of local ref_count mechanism
   (Stephen Boyd).
 - Clean up some debug logs and indentations (Sean Paul).
 - Simplify dp rate calculation (Sean Paul).
 - Add support to configure refclk based on input REFCLK pin or DACP/N
   pin (Stephen Boyd).

Changes in v7:
 - Use static supply entries instead of dynamic allocation (Andrzej
   Hajda).
 - Defer bridge driver probe if panel is not probed (Andrzej Hajda).
 - Update of_graph APIs for correct node reference management. (Andrzej
   Hajda).
 - Remove local display_mode object (Andrzej Hajda).
 - Remove version id check function from driver.

Changes in v8:
 - Move dsi register/attach function to bridge driver probe (Andrzej
   Hajda).
 - Introduce a new helper function to write 16bit words into consecutive
   registers (Andrzej Hajda).
 - Remove unnecessary macros (Andrzej Hajda).

Changes in v9:
 - Remove dsi register/attach from bridge probe, since dsi dev register
   completion also waits for any panel or bridge to get added. This creates
   deadlock situation when bridge driver calls dsi dev register and
   attach before bridge add, in its probe function.
 - Fix issues faced during testing of bridge driver on actual HW.
 - Remove unnecessary initializations (Stephen Boyd).
 - Use local refclk lut size instead of global macro (Sean Paul).

Changes in v10:
 - Use refclk to determine if continuous dsi clock is needed or not.

Changes in v11:
 - Read DPPLL_SRC register to determine continuous clock instead of
   using refclk handle (Stephen Boyd).

Changes in v12:
 - Explain in comment as in why dsi dev registration is done in
   bridge_attach (Andrzej Hajda).
 - Move HPD disable to bridge_pre_enable (Andrzej Hajda).
 - Make panel/DDC exclusive until HPD support is added (Andrzej Hajda).

Changes in v13:
 - eDP panels report EDID via DP-AUX channel, so remove support for
   dedicated DDC line (Andrzej Hajda).

Changes in v14:
 - Remove unnecessary drm_panel checks (Andrzej Hajda).

Signed-off-by: Sandeep Panda <spanda@codeaurora.org>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1532069642-21392-1-git-send-email-spanda@codeaurora.org

dt-bindings: drm/bridge: Document sn65dsi86 bridge bindings

Document the bindings used for the sn65dsi86 DSI to eDP bridge.

Changes in v1:
 - Rephrase the dt-binding descriptions to be more inline with existing
   bindings (Andrzej Hajda).
 - Add missing dt-binding that are parsed by corresponding driver
   (Andrzej Hajda).

Changes in v2:
 - Remove edp panel specific dt-binding entries. Only keep bridge
   specific entries (Sean Paul).
 - Remove custom-modes dt entry since its usage is removed from driver also (Sean Paul).
 - Remove is-pluggable dt entry since this will not be needed anymore (Sean Paul).

Changes in v3:
 - Remove irq-gpio dt entry and instead populate is an interrupt
   property (Rob Herring).

Changes in v4:
 - Add link to bridge chip datasheet (Stephen Boyd)
 - Add vpll and vcc regulator supply bindings (Stephen Boyd)
 - Add ref clk optional dt binding (Stephen Boyd)
 - Add gpio-controller optional dt binding (Stephen Boyd)

Changes in v5:
 - Use clock property to specify the input refclk (Stephen Boyd).
 - Update gpio cell and pwm cell numbers (Stephen Boyd).

Changes in v6:
 - Add property to mention the lane mapping scheme and polarity inversion
   (Stephen Boyd).

Changes in v7:
 - Detail description of lane mapping scheme dt property (Andrzej
   Hajda/ Rob Herring).
 - Removed HDP gpio binding, since the bridge uses IRQ signal to
   determine HPD, and IRQ property is already documented in binding.

Changes in v8:
 - Removed unnecessary explanation of lane mapping and polarity dt
   property, since these are already explained in media/video-interface
   dt binidng (Rob Herring).

Changes in v9:
 - Avoid putting re-definition of lane mapping and polarity dt binding
   (Rob Herring).

Changes in v10:
 - Use interrupts-extended property instead of interrupts to specify
   interrupt line (Andrzej Hajda).
 - Move data-lanes and lane-polarity property example to proper place (Andrzej Hajda).

Changes in v11:
 - Add a property for suspend gpio function of GPIO1 pin on bridge chip
   (Stephen Boyd).

Changes in v12:
 - Remove binding for dedicated DDC line (Andrzej Hajda).

Signed-off-by: Sandeep Panda <spanda@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180716084330.26698-3-spanda@codeaurora.org

dt-bindings: mipi-dsi: Add dual-channel DSI related info

Add binding info for peripherals that support dual-channel DSI. Add
corresponding optional bindings for DSI host controllers that may
be configured in this mode. Add an example of an I2C controlled
device operating in dual-channel DSI mode.

Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180709090751.10221-3-architt@codeaurora.org

dt-bindings: mipi-dsi: Add info about peripherals with non-DSI control bus

Add a section that describes dt-bindings for peripherals that support
MIPI DSI, but have a different bus as the primary control bus, or no
control bus at all. Add an example for a peripheral with a non-DSI
control bus.

Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180709090751.10221-2-architt@codeaurora.org

drm/sun4i: tcon: Add support for R40 TCON

R40 TV TCON is basically the same as on A83T. However, it needs special
handling, because it has to set up TCON TOP muxes at runtime.

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180710203511.18454-14-jernej.skrabec@siol.net

drm/sun4i: tcon: Add another way for matching mixers with tcon

Till now, new way of matching engines with TCONs was reading their
respective ids and match them by those ids. However, with introduction
of TCON TOP, that might not be so straightforward anymore.
- there might be more TCONs that engines (mixers)
- TCON ids might have non-consecutive ids

Workaround that by matching mixer id with TCON index from TCON list.

For example, R40 has 2 mixers and 4 TCONs. Board designer can choose
2 outputs, which are connected to any of those 4 TCONs. As long as there
are only 2 TCONs enabled in DT, using index in list as alternative id,
will allow to match them with mixer 0 and 1.

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180710203511.18454-13-jernej.skrabec@siol.net

drm/sun4i: Use (struct drm_format_info) fields to determine if a format is yuv and multi planar or not.

We do not need sun4i_backend_format_is_packed_yuv422() /
sun4i_backend_format_is_planar_yuv() to determine if the format is yuv multi planar
or not. (struct drm_format_info *)->is_yuv tells if the format is yuv or not.
And (struct drm_format_info *)->num_planes denotes the number of planes.

This issue was identified during a review on a previous patch:-
https://lists.freedesktop.org/archives/dri-devel/2018-July/183840.html

Signed-off-by: Ayan Kumar halder <ayan.halder@arm.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1532336220-3791-1-git-send-email-ayan.halder@arm.com

drm/rockchip: Replace drm_dev_unref with drm_dev_put

This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180717110927.30776-1-tzimmermann@suse.de

drm: Replace NULL with error value in drm_prime_pages_to_sg

Dan Carpenter has reported that there is the following static checker
warning:
drivers/gpu/drm/drm_prime.c:317 drm_gem_map_dma_buf()
warn: 'sgt' can also be NULL

314 sgt = obj->dev->driver->gem_prime_get_sg_table(obj);
315
316 if (!IS_ERR(sgt)) {
317 if (!dma_map_sg_attrs(attach->dev, sgt->sgl, sgt->nents, dir,

Problematic functions are xen_drm_front_gem_get_sg_table and
drm_gem_cma_prime_get_sg_table. Fix those by replacing NULL with error value.

Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180719093713.3643-1-andr2000@gmail.com

drm/print: Fix DRM_DEBUG_DP macro

This isn't supposed to take dev as an argument, I guess no one noticed!

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180718215716.5784-1-lyude@redhat.com

drm/sun4i: sun4i: Introduce a quirk for lowest plane alpha support

Not all sunxi platforms with the first version of the Display Engine
support an alpha component on the plane with the lowest z position
(as in: lowest z-pos), that gets blended with the background color.

In particular, the A13 is known to have this limitation. However, it was
recently discovered that the A20 and A33 are capable of having alpha on
their lowest plane.

Thus, this introduces a specific quirk to indicate such support,
per-platform. Since this was not tested on sun4i and sun6i platforms, a
conservative approach is kept and this feature is not supported.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180719080838.31598-2-paul.kocialkowski@bootlin.com

drm/sun4i: sun4i: Register quirks with the backend structure

In prevision for introducing a new quirk that will be used at atomic
plane check time, register the quirks structure with the backend
structure. This way, it can easily be grabbed where needed.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180719080838.31598-1-paul.kocialkowski@bootlin.com

drm/sun4i: Handle DRM_BUS_FLAG_PIXDATA_*EDGE checking if panel is used.

Handle both positive and negative dclk polarity,
according to bus_flags, taking care of this:

On A20 and similar SoCs, the only way to achieve Positive Edge
(Rising Edge), is setting dclk clock phase to 2/3(240°).
By default TCON works in Negative Edge(Falling Edge), this is why phase
is set to 0 in that case.
Unfortunately there's no way to logically invert dclk through IO_POL
register.
The only acceptable way to work, triple checked with scope,
is using clock phase set to 0° for Negative Edge and set to 240° for
Positive Edge.
On A33 and similar SoCs there would be a 90° phase option, but it divides
also dclk by 2.
This patch is a way to avoid quirks all around TCON and DOTCLOCK drivers
for using A33 90° phase divided by 2 and consequently increase code
complexity.

Check if panel is used. TCON can also handle VGA DAC, then panel could
be empty.

Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180718142357.120998-1-giulio.benetti@micronovasrl.com

drm/sun4i: Substitute sun4i_backend_format_is_yuv() with format->is_yuv

drm_format_info table has a field 'is_yuv' to denote if the format
is yuv or not. The driver is expected to use this instead of
having a function for the same purpose.

Signed-off-by: Ayan Kumar halder <ayan.halder@arm.com>
Reviewed-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1531847626-22248-5-git-send-email-ayan.halder@arm.com

drm/rockchip: Substitute is_yuv_support() with format->is_yuv

drm_format_info table has a field 'is_yuv' to denote if the format
is yuv or not. The driver is expected to use this instead of
having a function for the same purpose.

Signed-off-by: Ayan Kumar halder <ayan.halder@arm.com>
Reviewed-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1531847626-22248-3-git-send-email-ayan.halder@arm.com

drm/i915: Substitute intel_format_is_yuv() with format->is_yuv

drm_format_info table has a field 'is_yuv' to denote if the format
is yuv or not. The driver is expected to use this instead of
having a function for the same purpose.

Signed-off-by: Ayan Kumar halder <ayan.halder@arm.com>
Reviewed-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1531847626-22248-2-git-send-email-ayan.halder@arm.com

drm/fourcc: Add is_yuv field to drm_format_info to denote if the format is yuv

A lot of drivers duplicate the function to check if a format is yuv or not.
If we add a field (to denote whether the format is yuv or not) in the
drm_format_info table, all the drivers can use this field and it will
prevent duplication of similar logic.

Signed-off-by: Ayan Kumar halder <ayan.halder@arm.com>
Reviewed-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1531847626-22248-1-git-send-email-ayan.halder@arm.com

drm/pl111: Use 64-bit arithmetic instead of 32-bit

Add suffix ULL to constant 1000 in order to give the compiler complete
information about the proper arithmetic to use.

Notice that such constant is used in a context that expects an
expression of type u64 (64 bits, unsigned) and the following
expression is currently being evaluated using 32-bit arithmetic:

mode->clock * 1000

Addresses-Coverity-ID: 1466139 ("Unintentional integer overflow")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180704142255.GA8614@embeddedor.com

drm/pl111: Replace drm_dev_unref with drm_dev_put

This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180717083657.16262-1-tzimmermann@suse.de

drm/vc4: Replace drm_dev_unref with drm_dev_put

This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180717085428.18500-1-tzimmermann@suse.de

drm/sun4i: sun8i: Avoid clearing blending order at each atomic commit

Blending order is set based on the z position of each DRM plane. The
blending order register is currently cleared at each atomic DRM commit,
with the intent that each committed plane will set the appropriate
bits (based on its z-pos) when enabling the plane.

However, it sometimes happens that a particular plane is left unchanged
by an atomic commit and thus will not be configured again. In that
scenario, blending order is cleared and only the bits relevant for the
planes affected by the commit are set. This leaves the planes that did
not change without their blending order set in the register, leading
to that plane not being displayed.

Instead of clearing the blending order register at every atomic commit,
this change moves the register's initial clear at bind time and only
clears the bits for a specific plane when disabling it or changing its
zpos.

This way, planes that are left untouched by a DRM atomic commit are
no longer disabled.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180717122522.11327-1-paul.kocialkowski@bootlin.com

drm/sun4i: Replace drm_dev_unref with drm_dev_put

This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180717084814.18091-1-tzimmermann@suse.de

drm/connector: Fix typo in drm_connector_list_iter_next()

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180716171711.413-1-lyude@redhat.com

drm/dp_helper: Add DP aux channel tracing

This is something we've needed for a very long time now, as it makes
debugging issues with faulty MST hubs along with debugging issues
regarding us interfacing with hubs correctly vastly easier to debug.
Currently this can actually be done if you trace the i2c devices for DP
using ftrace but that's significantly less useful for a couple of
reasons:

- Tracing the i2c devices through ftrace means all of the traces are
  going to contain a lot of "garbage" output that we're sending over the
  i2c line. Most of this garbage comes from retrying transactions, DRM's
  helper library adding extra transactions to work around bad hubs, etc.
- Having a user set up ftrace so that they can provide debugging
  information is a lot more difficult then being able to say "just boot
  with drm.debug=0x100"
- We can potentially expand upon this tracing in the future to print
  debugging information in regards to other DP transactions like MST
  sideband transactions

This is inspired by a patch Rob Clark sent to do this a long time back.
Neither of us could find the patch however, so we both assumed it would
probably just be easier to rewrite it anyway.

Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180716154432.13433-1-lyude@redhat.com

drm: writeback: Fix doc that says connector should be disconnected

During iteration process one of the proposed mechanism for not
breaking existing userspace was to report writeback connectors as
disconnected, however the final version used
DRM_CLIENT_CAP_WRITEBACK_CONNECTORS for that purpose.

Change-Id: I2319d099f7669094c8530f1521abdbca08e76486
Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/238399/

dma-buf: Move BUG_ON from _add_shared_fence to _add_shared_inplace

Fixes the BUG_ON spuriously triggering under the following
circumstances:

* reservation_object_reserve_shared is called with shared_count ==
  shared_max - 1, so obj->staged is freed in preparation of an in-place
  update.

* reservation_object_add_shared_fence is called with the first fence,
  after which shared_count == shared_max.

* reservation_object_add_shared_fence is called with a follow-up fence
  from the same context.

In the second reservation_object_add_shared_fence call, the BUG_ON
triggers. However, nothing bad would happen in
reservation_object_add_shared_inplace, since both fences are from the
same context, so they only occupy a single slot.

Prevent this by moving the BUG_ON to where an overflow would actually
happen (e.g. if a buggy caller didn't call
reservation_object_reserve_shared before).

v2:
* Fix description of breaking scenario (Christian König)
* Add bugzilla reference

Cc: stable@vger.kernel.org
Bugzilla: https://bugs.freedesktop.org/106418
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> # v1
Reviewed-by: Christian König <christian.koenig@amd.com> # v1
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180704151405.10357-1-michel@daenzer.net

drm/meson: Make DMT timings parameters and pixel clock generic

Remove the modes timings tables for DMT modes and calculate the HW
paremeters from the modes timings.

Switch the DMT modes pixel clock calculation out of the static frequency
list to a generic calculation from a range of possible PLL dividers.

This patch is an intermediate step towards usage of the Common Clock
Framwework for PLL setup, by reworking the code to have common
sel_pll() function called by the CEA (HDMI) freq setup and the generic
DMT frequencies setup, we should be able to simply call clk_set_rate()
on the PLL clock handle in a near future.

The CEA (HDMI) and CVBS modes needs very specific clock paths that CCF will
never be able to determine by itself, so there is still some work to do for
a full handoff to CCF handling the clocks.

This setup permits setting non-CEA modes like :
- 1600x900-60Hz
- 1280x1024-75Hz
- 1280x1024-60Hz
- 1440x900-60Hz
- 1366x768-60Hz
- 1280x800-60Hz
- 1152x864-75Hz
- 1024x768-75Hz
- 1024x768-70Hz
- 1024x768-60Hz
- 832x624-75Hz
- 800x600-75Hz
- 800x600-72Hz
- 800x600-60Hz
- 640x480-75Hz
- 640x480-73Hz
- 640x480-67Hz

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
[narmstrong: fixed trivial checkpatch issues]
Link: https://patchwork.freedesktop.org/patch/msgid/1531726814-14638-1-git-send-email-narmstrong@baylibre.com

drm/doc: use inline kerneldoc style for drm_crtc_state

Lots of added text here since I think the various control flow bits
are worth explaining a bit better.

v2: Fix conflict with Boris' no_vblank addition.

Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180709084016.23750-15-daniel.vetter@ffwll.ch

drm/doc: Include drm_of.c helpers

Fixes a dead link I spotted in the struct drm_crtc docs. Comments
themselves are in a surprisingly good state.

v2: Fix subject typo (Sean).

Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180709084016.23750-14-daniel.vetter@ffwll.ch

drm/doc: Group the fb gem helpers better

Instead of spreading them all over the place.

Cc: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180709084016.23750-13-daniel.vetter@ffwll.ch

drm/doc: move struct drm_crtc to in-line comments

And clean them up a bit, as usual.

v2: Fix nits (Sean).

Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180709084016.23750-12-daniel.vetter@ffwll.ch

drm: switch drm_plane to inline comments

And use that opportunity to polish the kernel doc all around:
- Beef up some of the documentation.
- Intro text for drm_plane and better links
- Fix all the hyperlinks!

v2: Fix linebreaks.

Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180709084016.23750-10-daniel.vetter@ffwll.ch

drm: Switch drm_plane_state to inline kerneldoc style

For consistency and to encourage more detailed documentation. While
doing this also beefed up a few of the comments, linking at least to
the setup function. Plus fixed all the hyperlinks.

Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180709084016.23750-9-daniel.vetter@ffwll.ch

drm: drop _mode_ from remaining connector functions

Since there's very few callers of these I've decided to do them all in
one patch. With this the unecessarily long drm_mode_connector_ prefix
is gone from the codebase! The only exception being struct
drm_mode_connector_set_property, which is part of the uapi so can't be
renamed.

Again done with sed+some manual fixups for indent issues.

Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180709084016.23750-8-daniel.vetter@ffwll.ch

drm: drop _mode_ from drm_mode_connector_attach_encoder

Again to align with the usual prefix of just drm_connector_. Again
done with sed + manual fixup for indent issues.

Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180709084016.23750-7-daniel.vetter@ffwll.ch

drm: drop _mode_ from update_edit_property()

Just makes it longer, and for most things in drm_connector.[hc] we
just use the drm_connector_ prefix. Done with sed + a bit of manual
fixup for the indenting.

Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180709084016.23750-6-daniel.vetter@ffwll.ch

drm/doc: polish for sturct drm_connector

- switch everything over to inline comments
- add notes about locking, links to functions and other related stuff
- also include a note about Ville's soon-to-be-merged
  drm_connector_for_each_possible_encoder().

Also check that all the hyperlinks in drm_connector.h work and fix
them as needed.

Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180709084016.23750-5-daniel.vetter@ffwll.ch

drm/doc: switch drm_connector_state to inline comments

For consistency. Also spelled out the docs for ->best_encoder a bit
more while at it.

Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180709084016.23750-4-daniel.vetter@ffwll.ch

drm: move drv test macros out of drmP.h

Last bit the prevented us from starting to delete the drmP.h monster
includes from source files!

Also add kernel-doc while moving them.

A nice consistent drm_dev_ prefix would be cute for these, but since
they're used everywhere I've figured I'll leave this bikeshed aside
for now.

Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180709084016.23750-2-daniel.vetter@ffwll.ch

drm/arm/malidp: Add modifier definitions for describing Arm Framebuffer Compression (AFBC).

AFBC is a proprietary lossless image compression protocol and format.
It provides fine-grained random access and minimizes the amount of data
transferred between IP blocks.
AFBC has several features which may be supported and/or used, which are
represented using bits in the modifier. Not all combinations are valid,
and different devices or use-cases may support different combinations.

Changes from v2:-
- Added ack by Maarten Lankhorst

Signed-off-by: Rosen Zhelev <rosen.zhelev@arm.com>
Signed-off-by: Ayan Kumar halder <ayan.halder@arm.com>
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: James (Qian) Wang <james.qian.wang@arm.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lkml.org/lkml/2018/7/10/360

drm: Fix kerneldoc for DRM_MODE_PROP_IMMUTABLE

Noticed this while browsing the docs.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180713153444.95466-1-seanpaul@chromium.org

drm: Skip __drm_mode_set_config_internal() on atomic drivers

Everything (apart from the actual ->set_config() call)
__drm_mode_set_config_internal() does is now useless on
atomic drivers. So let's just skip all the foreplay.

v2: Use drm_drv_uses_atomic_modeset() (Daniel)

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180705190010.19836-1-ville.syrjala@linux.intel.com

drm: Introduce __setplane_atomic()

All the plane->fb/old_fb/crtc dance of __setplane_internal() is
pointless on atomic drivers. So let's just introduce a simpler
version that skips all that.

Ideally we could also skip the __setplane_check() as
drm_atomic_plane_check() already checks for everything, but the
legacy cursor/"async" .update_plane() tricks bypass that so
we still need to call __setplane_check(). Toss in a FIXME to
remind someone to clean this up later.

v2: Use drm_drv_uses_atomic_modeset() (Daniel)

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180705185907.9524-1-ville.syrjala@linux.intel.com

drm: Extract __setplane_check()

Pull all the error checking out from __set_plane_internal() to a helper
function. We'll have another user of this soon.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180628135457.14647-1-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: add DisplayPort CEC-Tunneling-over-AUX support

Implement support for this DisplayPort feature.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180711132909.25409-4-hverkuil@xs4all.nl

drm-kms-helpers.rst: document the DP CEC helpers

Document the Display Port CEC helper functions.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180711132909.25409-3-hverkuil@xs4all.nl

drm: add support for DisplayPort CEC-Tunneling-over-AUX

This adds support for the DisplayPort CEC-Tunneling-over-AUX
feature that is part of the DisplayPort 1.3 standard.

Unfortunately, not all DisplayPort/USB-C to HDMI adapters with a
chip that has this capability actually hook up the CEC pin, so
even though a CEC device is created, it may not actually work.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180711132909.25409-2-hverkuil@xs4all.nl

drm/client: Fix double free in error path

This fixes a static checker warning:

drivers/gpu/drm/drm_client.c:289 drm_client_buffer_create()
error: double free of 'buffer'

Extend drm_client_buffer_delete() to handle the case when there's no
dumb buffer attached and drop the extra kfree.

Fixes: c76f0f7cb546 ("drm: Begin an API for in-kernel clients")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180712150414.46908-1-noralf@tronnes.org

drm/sti: Replace drm_dev_unref with drm_dev_put

This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180712152639.30934-1-tzimmermann@suse.de

drm/stm: Replace drm_dev_unref with drm_dev_put

This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180713080625.18256-1-tzimmermann@suse.de

drm/tinydrm: add backlight dependency for ili9341

This tinydrm driver fails to link without the backlight support:

drivers/gpu/drm/tinydrm/ili9341.o: In function `ili9341_probe':
ili9341.c:(.text+0x578): undefined reference to `devm_of_find_backlight'

Fixes: 3fa0e8f6f960 ("drm/tinydrm: new driver for ILI9341 display panels")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: David Lechner <david@lechnology.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180709152106.990066-1-arnd@arndb.de

drm/sun4i: tcon-top: Fix return type warning

When commit af11942ee44e ("drm/sun4i: tcon-top: Cleanup clock handling")
was merged, the error handling path of the of_property_match_string was
changed to take into account the fact that the returned value of that
function wasn't an error pointer but an error code.

Unfortunately, this introduced a warning since the now returned value is an
integer, while the sun8i_tcon_top_register_gate function should return an
error pointer.

Fix that by calling ERR_PTR.

Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Cc: Chen-Yu Tsai <wens@csie.org>
Fixes: af11942ee44e ("drm/sun4i: tcon-top: Cleanup clock handling")
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180712080818.3571-1-maxime.ripard@bootlin.com

drm/sun4i: Implement zpos for DE2

Initial implementation of DE2 planes only supported fixed zpos.

Expand implementation with configurable zpos property.

Implementation background:
Channel in DE2 driver represents one DRM plane, whereas pipe is just
mapped channel to known Z position. Pipe 0 will always be at the bottom,
pipe 1 just above pipe 0 and so on. If, for example, channel 1 is mapped
at pipe 0 and channel 0 at pipe 1, whatever is on channel 0 will appear
on top.

Before this commit, channel id was used for addressing channel related
registers (prefixed with SUN8I_MIXER_CHAN_UI_ or SUN8I_MIXER_CHAN_VI_)
and pipe registers (prefixed with SUN8I_MIXER_BLEND_). Additionally,
register SUN8I_MIXER_BLEND_ROUTE, which takes care for mapping channels
to pipes had fixed value. It mapped channel 0 to pipe 0, 1 to 1 and so
on. Consequence of all that was fixed Z order of planes.

With this commit, pipe registers are using zpos property as index and
channel related registers still use channel id as index. Pipe mapping
register is now set dynamically too and pipe enable register is rebuild
every time to make sure only active pipes are enabled.

Testing was done to confirm that there is no issues if bottom plane
contains pixels with alpha value < 0xff and if it doesn't whole screen.

Tested-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180706164732.24166-1-jernej.skrabec@siol.net

drm/vkms: Add framebuffer and plane helpers

This patch appends the minimum helpers related to framebuffer and plane
to make vkms minimally usable.

Changes since V1:
- None
Changes since V2:
- Squash "Add plane helper struct" and "Add helper for framebuffer
  create"
Changes since V3:
 Daniel Vetter:
 - Remove atomic_check from plane helper

Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/d37807da7d3b39444b4c9abb149fe3c518d07c61.1531402095.git.rodrigosiqueiramelo@gmail.com

drm/sun4i: fix build failure with CONFIG_DRM_SUN8I_MIXER=m

Having DRM_SUN4I built-in but DRM_SUN8I_MIXER as a loadable module results in
a link error, as we try to access a symbol from the sun8i_tcon_top.ko module:

ERROR: "sun8i_tcon_top_of_table" [drivers/gpu/drm/sun4i/sun8i-drm-hdmi.ko] undefined!
ERROR: "sun8i_tcon_top_of_table" [drivers/gpu/drm/sun4i/sun4i-drm.ko] undefined!

This solves the problem by adding a silent symbol for the tcon_top module,
building it as a separate module in exactly the cases that we need it,
but in a way that it is reachable by the other modules.

Fixes: 57e23de02f48 ("drm/sun4i: DW HDMI: Expand algorithm for possible crtcs")
Fixes: ef0cf6441fbb ("drm/sun4i: Add support for traversing graph with TCON TOP")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180711144403.1022829-1-arnd@arndb.de

drm/sun4i: mixer: Read id from DT

Currently, TCON supports 2 ways to match TCON with engine (mixer in this
case). Old way is to just traverse of graph backwards and compare node
pointer. New way is to match TCON and engine by their respective ids.
All SoCs with DE2 enabled till now used the old way, which means mixer
id was never used and thus never implemented.

However, for R40, only the new way will be used. To prepare for that,
implement mixer id fetching from DT.

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180711112706.30222-1-jernej.skrabec@siol.net

drm/sun4i: DW HDMI: Make symbol sun8i_dw_hdmi_pltfm_driver static

Fixes the following sparse warning:

drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c:228:24: warning:
 symbol 'sun8i_dw_hdmi_pltfm_driver' was not declared. Should it be static?

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1531315367-190647-1-git-send-email-weiyongjun1@huawei.com

drm/vkms: Add vblank events simulated by hrtimers

This commit adds regular vblank events simulated through hrtimers, which
is a feature required by VKMS to mimic real hardware. Additionally, all
the vblank event send after pageflip is kept in the atomic_flush
function.

Changes since V1:
 - Compute the vblank timer interval per interruption
 Ville Syrjälä and Daniel Vetter:
 - Removes hardcoded vblank interval to get it from user space

Changes since V2:
 Chris Wilson
 - Removes unnecessary algorithm to compute the next period
 Daniel Vetter:
 - Uses drm_calc_timestamping_constants to get the vblank interval
   instead of calculating it manually
 - Adds disable_vblank helper that turns of crtc
 - Simplifies implementation by using drm_crtc_arm_vblank_event
 - Replaces the code in atomic_begin to atomic_flush
 - Removes unnecessary field in vkms_output

Changes since V3:
 Daniel Vetter:
 - Squash "drm/vkms: Add atomic helpers functions" into the commit that
   handling vblank events simulated by hrtimers

Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/7709bba40782ec06332d57fff337797b272581fc.1531359228.git.rodrigosiqueiramelo@gmail.com

drm/vkms: Add connectors helpers

This patch adds the struct drm_connector_helper_funcs with some
necessary hooks. Additionally, it also adds some missing hooks at
drm_connector_funcs.

Changes since V1:
- None
Change since V2:
 Daniel Vetter:
 - Remove vkms_conn_mode_valid

Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/c8ee28b889234e866ef18bce4216385661c48041.1531359228.git.rodrigosiqueiramelo@gmail.com

drm: gma500: Changed __attribute__((packed)) to __packed

Signed-off-by: Eames Trinh <eamestrinh@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180710130021.4499-1-eamestrinh@gmail.com

drm/vkms: Add dumb operations

VKMS currently does not handle dumb data, and as a consequence, it does
not provide mechanisms for handling gem. This commit adds the necessary
support for gem object/handler and the dumb functions.

Changes since V1:
 Daniel Vetter:
 - Add dumb buffer support to the same patchset
Changes since V2:
 Haneen:
 - Add missing gem_free_object_unlocked callback to fix the warning
   "Memory manager not clean during takedown"

Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/70b7becc91c6a323dbc15cb5fc912cbdfe4ef7d9.1531359228.git.rodrigosiqueiramelo@gmail.com

drm/client: Fix: drm_client_new: Don't require DRM to be registered

Commit 894a677f4b3e ("drm/cma-helper: Use the generic fbdev emulation")
broke almost all drivers that use the CMA helper.

The reason is that drm_client_new() requires that the DRM device has
been registered, but the drivers register fbdev before registering DRM.

Remove the requirement that DRM should be registered when creating a
new client.

Fixes: c76f0f7cb546 ("drm: Begin an API for in-kernel clients")
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Icenowy Zheng <icenowy@aosc.io>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180711155632.37437-1-noralf@tronnes.org

drm/tinydrm: Fix doc build warnings

include/drm/tinydrm/tinydrm.h:34: warning: Function parameter or member 'fb_dirty' not described in 'tinydrm_device'
drivers/gpu/drm/tinydrm/mipi-dbi.c:272: warning: Function parameter or member 'crtc_state' not described in 'mipi_dbi_enable_flush'
drivers/gpu/drm/tinydrm/mipi-dbi.c:272: warning: Function parameter or member 'plane_state' not described in 'mipi_dbi_enable_flush'

Move struct member docs inline so it's not missed next time.

Cc: David Lechner <david@lechnology.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: David Lechner <david@lechnology.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180710150518.10528-1-noralf@tronnes.org

drm/panel: simple: Add Sharp LQ035Q7DB03 panel support

The change adds support for Sharp LQ035Q7DB03 3.5" QVGA TFT panel.

Note that this aged panel is already found in the kernel sources,
for instance in board mach files mach-mx21ads.c, mach-mx27ads.c,
mach-pcm043.c, lpd270.c and imx27-phytec-phycore-rdk.dts.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180706185101.31186-1-vz@mleia.com

dt-bindings: display: sun4i-drm: Fix order of DW HDMI PHY compatibles

They are currently sorted alphabetically. However, they should be sorted
by release date of the family and then alphabetically.

Fixes: 03c35dbf73e0 ("dt-bindings: display: sun4i-drm: Add description of A64 HDMI PHY")

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180710203511.18454-19-jernej.skrabec@siol.net

drm/sun4i: tcon-top: Remove mux configuration at probe time

Now that R40 TCON migrated to runtime mux configuration, old code can be
removed.

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180710203511.18454-18-jernej.skrabec@siol.net

drm/sun4i: tcon-top: Add helpers for mux switching

We want to be able to set TCON TOP muxes at runtime. Add helpers for
that.

Old, static configuration of muxes at probe time is preserved for now.
It will be removed when R40 TCON starts using them.

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180710203511.18454-12-jernej.skrabec@siol.net

drm/sun4i: mixer: Order includes alphabetically

Includes are not alphabetically ordered.

Reorder them.

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180710203511.18454-10-jernej.skrabec@siol.net

drm/sun4i: DW HDMI: Release nodes if error happens during CRTC search

If error happens in sun8i_dw_hdmi_find_possible_crtcs(), nodes are not
released with of_node_put() before returning.

Fix that by calling of_node_put() when necessary. While on it, clean up
the code by using of_graph_get_remote_node() which also lowers number of
cases where error handling has to be performed.

Fixes: 57e23de02f48 ("drm/sun4i: DW HDMI: Expand algorithm for possible crtcs")

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180710203511.18454-8-jernej.skrabec@siol.net

dt-bindings: display: sun4i-drm: Add R40 TV TCON description

TCON description is expanded with R40 TV TCON compatible. It is a bit
special, because it is connected to TCON TOP instead directly to mixer
and it needs special handling.

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180710203511.18454-7-jernej.skrabec@siol.net

drm/sun4i: tcon: Release node when traversing of graph

Function sun4i_tcon_find_engine_traverse() doesn't release node if it
needs to traverse of graph deeper than 1 level.

Fix this by calling of_node_put().

Fixes: 49836b11fe71 ("drm/sun4i: tcon: Generalize engine search algorithm")

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180710203511.18454-6-jernej.skrabec@siol.net

drm/sun4i: tcon-top: Cleanup clock handling

There is no need to acquire reference to clock just to get its name.

This commit just cleans up the code. There is no functional change.

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
[Maxime: Fixed the of_property_match_string error check]
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180710203511.18454-5-jernej.skrabec@siol.net

drm/sun4i: Add R40 display engine compatible

R40 has versatile display pipeline. It supports two simultanious outputs
on various outputs (TVE, VGA, HDMI, MIPI DSI, LCD).

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180710203511.18454-3-jernej.skrabec@siol.net

dt-bindings: display: sun4i-drm: Add R40 display engine compatible

R40 has pretty unique display pipeline. It supports two outputs at the
same time.

Possible outputs:
- 1x HDMI,
- 2x TV output
- 1x VGA,
- 1x MIPI DSI and
- 2x LCD outputs

That is the biggest number of possible outputs from all Allwinner SoC.
Because of that, add new compatible for it.

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180710203511.18454-2-jernej.skrabec@siol.net