linux-2.6-microblaze.git
4 years agoMerge tag 'drm-misc-next-2020-07-22' of git://anongit.freedesktop.org/drm/drm-misc...
Dave Airlie [Thu, 23 Jul 2020 04:01:37 +0000 (14:01 +1000)]
Merge tag 'drm-misc-next-2020-07-22' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v5.9:

UAPI Changes:

Cross-subsystem Changes:
- Convert panel-dsi-cm and ingenic bindings to YAML.
- Add lockdep annotations for dma-fence. \o/
- Describe why indefinite fences are a bad idea
- Update binding for rocktech jh057n00900.

Core Changes:
- Add vblank workers.
- Use spin_(un)lock_irq instead of the irqsave/restore variants in crtc code.
- Add managed vram helpers.
- Convert more logging to drm functions.
- Replace more http links with https in core and drivers.
- Cleanup to ttm iomem functions and implementation.
- Remove TTM CMA memtype as it doesn't work correctly.
- Remove TTM_MEMTYPE_FLAG_MAPPABLE for many drivers that have no
  unmappable memory resources.

Driver Changes:
- Add CRC support to nouveau, using the new vblank workers.
- Dithering and atomic state fix for nouveau.
- Fixes for Frida FRD350H54004 panel.
- Add support for OSD mode (sprite planes), IPU (scaling) and multiple
  panels/bridges to ingenic.
- Use managed vram helpers in ast.
- Assorted small fixes to ingenic, i810, mxsfb.
- Remove optional unused ttm dummy functions.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d6bf269e-ccb2-8a7b-fdae-226e9e3f8274@linux.intel.com
4 years agodt-binding: display: Allow a single port node on rocktech, jh057n00900
Ondrej Jirman [Fri, 3 Jul 2020 11:47:17 +0000 (13:47 +0200)]
dt-binding: display: Allow a single port node on rocktech, jh057n00900

The display has one port. Allow it in the binding.

Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200703114717.2140832-3-megous@megous.com
4 years agodt-bindings: display: Fix example in nwl-dsi.yaml
Ondrej Jirman [Fri, 3 Jul 2020 11:47:16 +0000 (13:47 +0200)]
dt-bindings: display: Fix example in nwl-dsi.yaml

The example is now validated against rocktech,jh057n00900 schema
that was ported to yaml, and didn't validate with:

- '#address-cells', '#size-cells', 'port@0' do not match any of
  the regexes: 'pinctrl-[0-9]+'
- 'vcc-supply' is a required property
- 'iovcc-supply' is a required property
- 'reset-gpios' is a required property

Fix it.

Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200703114717.2140832-2-megous@megous.com
4 years agodrm/vblank: Use spin_(un)lock_irq() in drm_crtc_queue_sequence_ioctl()
Lyude Paul [Mon, 20 Jul 2020 19:07:36 +0000 (15:07 -0400)]
drm/vblank: Use spin_(un)lock_irq() in drm_crtc_queue_sequence_ioctl()

This is an ioctl callback, so we're guaranteed to have IRQs enabled when
calling this function. Use the plain _irq() variants of spin_(un)lock()
to make this more obvious.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200720190736.180297-6-lyude@redhat.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
4 years agodrm/vblank: Use spin_(un)lock_irq() in drm_queue_vblank_event()
Lyude Paul [Mon, 20 Jul 2020 19:07:35 +0000 (15:07 -0400)]
drm/vblank: Use spin_(un)lock_irq() in drm_queue_vblank_event()

This one's easy - we're already calling kzalloc(GFP_KERNEL) in this
function, so we must already be guaranteed to have IRQs enabled when
calling this. So, use the plain _irq() variants of spin_(un)lock() to
make this more obvious.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200720190736.180297-5-lyude@redhat.com
4 years agodrm/vblank: Use spin_(un)lock_irq() in drm_legacy_vblank_post_modeset()
Lyude Paul [Mon, 20 Jul 2020 19:07:34 +0000 (15:07 -0400)]
drm/vblank: Use spin_(un)lock_irq() in drm_legacy_vblank_post_modeset()

This function is only ever called from ioctl context, so we're
guaranteed to have interrupts enabled. Stop using the irqsave/irqrestore
variants of spin_(un)lock_irq() to make this more obvious.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200720190736.180297-4-lyude@redhat.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
4 years agodrm/vblank: Use spin_(un)lock_irq() in drm_crtc_vblank_on()
Lyude Paul [Mon, 20 Jul 2020 19:07:33 +0000 (15:07 -0400)]
drm/vblank: Use spin_(un)lock_irq() in drm_crtc_vblank_on()

This is only called from:
* Atomic modesetting hooks
* Module probing routines
* Legacy modesetting hooks

All of which have IRQs enabled, so we can also get rid of
irqsave/restore here to make the IRQ context of this function more
obvious.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200720190736.180297-3-lyude@redhat.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
4 years agodrm/vblank: Use spin_(un)lock_irq() in drm_crtc_vblank_reset()
Lyude Paul [Mon, 20 Jul 2020 19:07:32 +0000 (15:07 -0400)]
drm/vblank: Use spin_(un)lock_irq() in drm_crtc_vblank_reset()

All of the drivers in the kernel tree only call this from one of the
following contexts:

* drm_crtc_funcs->reset
* During initial module load

Since both of these contexts are guaranteed to have interrupts enabled
beforehand, there's no need to use the irqsave/irqrestore variants of
spin_(un)lock(). So, fix this to make the irq context of this function
more obvious.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200720190736.180297-2-lyude@redhat.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
4 years agodrm/qxl: stop using TTM_MEMTYPE_FLAG_MAPPABLE v2
Christian König [Thu, 16 Jul 2020 11:46:05 +0000 (13:46 +0200)]
drm/qxl: stop using TTM_MEMTYPE_FLAG_MAPPABLE v2

The driver doesn't expose any not-mapable memory resources.

v2: remove unused man variable as well

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/378246/
4 years agodrm/nouveau: stop using TTM_MEMTYPE_FLAG_MAPPABLE
Christian König [Thu, 16 Jul 2020 11:35:48 +0000 (13:35 +0200)]
drm/nouveau: stop using TTM_MEMTYPE_FLAG_MAPPABLE

The driver doesn't expose any not-mapable memory resources.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/378244/
4 years agodrm/vmwgfx: stop using TTM_MEMTYPE_FLAG_MAPPABLE
Christian König [Thu, 16 Jul 2020 08:15:17 +0000 (10:15 +0200)]
drm/vmwgfx: stop using TTM_MEMTYPE_FLAG_MAPPABLE

The driver doesn't expose any not-mapable memory resources.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/378241/
4 years agodrm/ttm: remove TTM_MEMTYPE_FLAG_CMA
Christian König [Wed, 15 Jul 2020 12:52:05 +0000 (14:52 +0200)]
drm/ttm: remove TTM_MEMTYPE_FLAG_CMA

The original intention was to avoid CPU page table unmaps
when BOs move between the GTT and SYSTEM domain.

The problem is that this never correctly handled changes
in the caching attributes or backing pages.

Just drop this for now and simply unmap the CPU page
tables in all cases.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/378240/
4 years agodrm/ttm: cleanup coding style and implementation.
Christian König [Wed, 15 Jul 2020 11:22:56 +0000 (13:22 +0200)]
drm/ttm: cleanup coding style and implementation.

Only functional change is to always keep io_reserved_count up to date
for debugging even when it is not used otherwise.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/378242/
4 years agodrm/ttm: remove io_reserve_fastpath flag
Christian König [Wed, 15 Jul 2020 11:05:52 +0000 (13:05 +0200)]
drm/ttm: remove io_reserve_fastpath flag

Just use the use_io_reserve_lru flag. It doesn't make much
sense to have two flags.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/378238/
4 years agodrm/ttm: cleanup io_mem interface with nouveau
Christian König [Mon, 13 Jul 2020 14:50:04 +0000 (16:50 +0200)]
drm/ttm: cleanup io_mem interface with nouveau

Nouveau is the only user of this functionality and evicting io space
on -EAGAIN is really a misuse of the return code.

Instead switch to using -ENOSPC here which makes much more sense and
simplifies the code.

This could unbreak something as we now cleanly return EAGAIN, but the
chance for this are rather low.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/378237/
4 years agodrm: remove optional dummy function from drivers using TTM
Christian König [Fri, 10 Jul 2020 13:13:41 +0000 (15:13 +0200)]
drm: remove optional dummy function from drivers using TTM

Implementing those is completely unnecessary.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Madhav Chauhan <madhav.chauhan@amd.com>
Link: https://patchwork.freedesktop.org/patch/378236/
4 years agodma-buf.rst: Document why indefinite fences are a bad idea
Daniel Vetter [Thu, 9 Jul 2020 12:33:38 +0000 (14:33 +0200)]
dma-buf.rst: Document why indefinite fences are a bad idea

Comes up every few years, gets somewhat tedious to discuss, let's
write this down once and for all.

What I'm not sure about is whether the text should be more explicit in
flat out mandating the amdkfd eviction fences for long running compute
workloads or workloads where userspace fencing is allowed.

v2: Now with dot graph!

v3: Typo (Dave Airlie)

Reviewed-by: Thomas Hellstrom <thomas.hellstrom@intel.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Jesse Natalie <jenatali@microsoft.com>
Cc: Steve Pronovost <spronovo@microsoft.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Thomas Hellstrom <thomas.hellstrom@intel.com>
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: linux-rdma@vger.kernel.org
Cc: amd-gfx@lists.freedesktop.org
Cc: intel-gfx@lists.freedesktop.org
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200709123339.547390-1-daniel.vetter@ffwll.ch
4 years agodma-fence: prime lockdep annotations
Daniel Vetter [Tue, 7 Jul 2020 20:12:06 +0000 (22:12 +0200)]
dma-fence: prime lockdep annotations

Two in one go:
- it is allowed to call dma_fence_wait() while holding a
  dma_resv_lock(). This is fundamental to how eviction works with ttm,
  so required.

- it is allowed to call dma_fence_wait() from memory reclaim contexts,
  specifically from shrinker callbacks (which i915 does), and from mmu
  notifier callbacks (which amdgpu does, and which i915 sometimes also
  does, and probably always should, but that's kinda a debate). Also
  for stuff like HMM we really need to be able to do this, or things
  get real dicey.

Consequence is that any critical path necessary to get to a
dma_fence_signal for a fence must never a) call dma_resv_lock nor b)
allocate memory with GFP_KERNEL. Also by implication of
dma_resv_lock(), no userspace faulting allowed. That's some supremely
obnoxious limitations, which is why we need to sprinkle the right
annotations to all relevant paths.

The one big locking context we're leaving out here is mmu notifiers,
added in

commit 23b68395c7c78a764e8963fc15a7cfd318bf187f
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Mon Aug 26 22:14:21 2019 +0200

    mm/mmu_notifiers: add a lockdep map for invalidate_range_start/end

that one covers a lot of other callsites, and it's also allowed to
wait on dma-fences from mmu notifiers. But there's no ready-made
functions exposed to prime this, so I've left it out for now.

v2: Also track against mmu notifier context.

v3: kerneldoc to spec the cross-driver contract. Note that currently
i915 throws in a hard-coded 10s timeout on foreign fences (not sure
why that was done, but it's there), which is why that rule is worded
with SHOULD instead of MUST.

Also some of the mmu_notifier/shrinker rules might surprise SoC
drivers, I haven't fully audited them all. Which is infeasible anyway,
we'll need to run them with lockdep and dma-fence annotations and see
what goes boom.

v4: A spelling fix from Mika

v5: #ifdef for CONFIG_MMU_NOTIFIER. Reported by 0day. Unfortunately
this means lockdep enforcement is slightly inconsistent, it won't spot
GFP_NOIO and GFP_NOFS allocations in the wrong spot if
CONFIG_MMU_NOTIFIER is disabled in the kernel config. Oh well.

v5: Note that only drivers/gpu has a reasonable (or at least
historical) excuse to use dma_fence_wait() from shrinker and mmu
notifier callbacks. Everyone else should either have a better memory
manager model, or better hardware. This reflects discussions with
Jason Gunthorpe.

Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: kernel test robot <lkp@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com> (v4)
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Thomas Hellstrom <thomas.hellstrom@intel.com>
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: linux-rdma@vger.kernel.org
Cc: amd-gfx@lists.freedesktop.org
Cc: intel-gfx@lists.freedesktop.org
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200707201229.472834-3-daniel.vetter@ffwll.ch
4 years agodma-fence: basic lockdep annotations
Daniel Vetter [Tue, 7 Jul 2020 20:12:05 +0000 (22:12 +0200)]
dma-fence: basic lockdep annotations

Design is similar to the lockdep annotations for workers, but with
some twists:

- We use a read-lock for the execution/worker/completion side, so that
  this explicit annotation can be more liberally sprinkled around.
  With read locks lockdep isn't going to complain if the read-side
  isn't nested the same way under all circumstances, so ABBA deadlocks
  are ok. Which they are, since this is an annotation only.

- We're using non-recursive lockdep read lock mode, since in recursive
  read lock mode lockdep does not catch read side hazards. And we
  _very_ much want read side hazards to be caught. For full details of
  this limitation see

  commit e91498589746065e3ae95d9a00b068e525eec34f
  Author: Peter Zijlstra <peterz@infradead.org>
  Date:   Wed Aug 23 13:13:11 2017 +0200

      locking/lockdep/selftests: Add mixed read-write ABBA tests

- To allow nesting of the read-side explicit annotations we explicitly
  keep track of the nesting. lock_is_held() allows us to do that.

- The wait-side annotation is a write lock, and entirely done within
  dma_fence_wait() for everyone by default.

- To be able to freely annotate helper functions I want to make it ok
  to call dma_fence_begin/end_signalling from soft/hardirq context.
  First attempt was using the hardirq locking context for the write
  side in lockdep, but this forces all normal spinlocks nested within
  dma_fence_begin/end_signalling to be spinlocks. That bollocks.

  The approach now is to simple check in_atomic(), and for these cases
  entirely rely on the might_sleep() check in dma_fence_wait(). That
  will catch any wrong nesting against spinlocks from soft/hardirq
  contexts.

The idea here is that every code path that's critical for eventually
signalling a dma_fence should be annotated with
dma_fence_begin/end_signalling. The annotation ideally starts right
after a dma_fence is published (added to a dma_resv, exposed as a
sync_file fd, attached to a drm_syncobj fd, or anything else that
makes the dma_fence visible to other kernel threads), up to and
including the dma_fence_wait(). Examples are irq handlers, the
scheduler rt threads, the tail of execbuf (after the corresponding
fences are visible), any workers that end up signalling dma_fences and
really anything else. Not annotated should be code paths that only
complete fences opportunistically as the gpu progresses, like e.g.
shrinker/eviction code.

The main class of deadlocks this is supposed to catch are:

Thread A:

mutex_lock(A);
mutex_unlock(A);

dma_fence_signal();

Thread B:

mutex_lock(A);
dma_fence_wait();
mutex_unlock(A);

Thread B is blocked on A signalling the fence, but A never gets around
to that because it cannot acquire the lock A.

Note that dma_fence_wait() is allowed to be nested within
dma_fence_begin/end_signalling sections. To allow this to happen the
read lock needs to be upgraded to a write lock, which means that any
other lock is acquired between the dma_fence_begin_signalling() call and
the call to dma_fence_wait(), and still held, this will result in an
immediate lockdep complaint. The only other option would be to not
annotate such calls, defeating the point. Therefore these annotations
cannot be sprinkled over the code entirely mindless to avoid false
positives.

Originally I hope that the cross-release lockdep extensions would
alleviate the need for explicit annotations:

https://lwn.net/Articles/709849/

But there's a few reasons why that's not an option:

- It's not happening in upstream, since it got reverted due to too
  many false positives:

commit e966eaeeb623f09975ef362c2866fae6f86844f9
Author: Ingo Molnar <mingo@kernel.org>
Date:   Tue Dec 12 12:31:16 2017 +0100

    locking/lockdep: Remove the cross-release locking checks

    This code (CONFIG_LOCKDEP_CROSSRELEASE=y and CONFIG_LOCKDEP_COMPLETIONS=y),
    while it found a number of old bugs initially, was also causing too many
    false positives that caused people to disable lockdep - which is arguably
    a worse overall outcome.

- cross-release uses the complete() call to annotate the end of
  critical sections, for dma_fence that would be dma_fence_signal().
  But we do not want all dma_fence_signal() calls to be treated as
  critical, since many are opportunistic cleanup of gpu requests. If
  these get stuck there's still the main completion interrupt and
  workers who can unblock everyone. Automatically annotating all
  dma_fence_signal() calls would hence cause false positives.

- cross-release had some educated guesses for when a critical section
  starts, like fresh syscall or fresh work callback. This would again
  cause false positives without explicit annotations, since for
  dma_fence the critical sections only starts when we publish a fence.

- Furthermore there can be cases where a thread never does a
  dma_fence_signal, but is still critical for reaching completion of
  fences. One example would be a scheduler kthread which picks up jobs
  and pushes them into hardware, where the interrupt handler or
  another completion thread calls dma_fence_signal(). But if the
  scheduler thread hangs, then all the fences hang, hence we need to
  manually annotate it. cross-release aimed to solve this by chaining
  cross-release dependencies, but the dependency from scheduler thread
  to the completion interrupt handler goes through hw where
  cross-release code can't observe it.

In short, without manual annotations and careful review of the start
and end of critical sections, cross-relese dependency tracking doesn't
work. We need explicit annotations.

v2: handle soft/hardirq ctx better against write side and dont forget
EXPORT_SYMBOL, drivers can't use this otherwise.

v3: Kerneldoc.

v4: Some spelling fixes from Mika

v5: Amend commit message to explain in detail why cross-release isn't
the solution.

v6: Pull out misplaced .rst hunk.

Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Thomas Hellstrom <thomas.hellstrom@intel.com>
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: linux-rdma@vger.kernel.org
Cc: amd-gfx@lists.freedesktop.org
Cc: intel-gfx@lists.freedesktop.org
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200707201229.472834-2-daniel.vetter@ffwll.ch
4 years agodrm/vram-helper: stop using TTM_MEMTYPE_FLAG_MAPPABLE
Christian König [Thu, 16 Jul 2020 11:58:35 +0000 (13:58 +0200)]
drm/vram-helper: stop using TTM_MEMTYPE_FLAG_MAPPABLE

The helper doesn't expose any not-mapable memory resources.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/377649/
4 years agovideo: fbdev: Replace HTTP links with HTTPS ones
Alexander A. Klimov [Sun, 19 Jul 2020 20:37:14 +0000 (22:37 +0200)]
video: fbdev: Replace HTTP links with HTTPS ones

Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
  If not .svg:
    For each line:
      If doesn't contain `\bxmlns\b`:
        For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
  If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
            If both the HTTP and HTTPS versions
            return 200 OK and serve the same content:
              Replace HTTP with HTTPS.

Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200719203714.61745-1-grandmaster@al2klimov.de
4 years agodrm: Replace HTTP links with HTTPS ones
Alexander A. Klimov [Sun, 19 Jul 2020 17:14:28 +0000 (19:14 +0200)]
drm: Replace HTTP links with HTTPS ones

Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
  If not .svg:
    For each line:
      If doesn't contain `\bxmlns\b`:
        For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
  If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
            If both the HTTP and HTTPS versions
            return 200 OK and serve the same content:
              Replace HTTP with HTTPS.

Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200719171428.60470-1-grandmaster@al2klimov.de
4 years agodrm/mxsfb: drop unused function parameter
Uwe Kleine-König [Thu, 16 Jul 2020 17:41:39 +0000 (19:41 +0200)]
drm/mxsfb: drop unused function parameter

flags is unused since the driver was introduced in commit 45d59d704080
("drm: Add new driver for MXSFB controller").

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716174139.16602-1-u.kleine-koenig@pengutronix.de
4 years agodrm/mxsfb: Make supported modifiers explicit
Guido Günther [Mon, 23 Mar 2020 14:52:46 +0000 (15:52 +0100)]
drm/mxsfb: Make supported modifiers explicit

In contrast to other display controllers on imx like DCSS and ipuv3
lcdif/mxsfb does not support detiling e.g. vivante tiled layouts.
Since mesa might assume otherwise make it explicit that only
DRM_FORMAT_MOD_LINEAR is supported.

Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/26877532e272c12a74c33188e2a72abafc9a2e1c.1584973664.git.agx@sigxcpu.org
4 years agodrm: core: Convert device logging to drm_* functions.
Suraj Upadhyay [Sat, 18 Jul 2020 15:09:55 +0000 (20:39 +0530)]
drm: core: Convert device logging to drm_* functions.

Convert device logging with dev_* functions into drm_* functions.

The patch has been generated with the coccinelle script below.
The script focuses on instances of dev_* functions where the drm device
context is clearly visible in its arguments.

@@expression E1; expression list E2; @@
-dev_warn(E1->dev, E2)
+drm_warn(E1, E2)

@@expression E1; expression list E2; @@
-dev_info(E1->dev, E2)
+drm_info(E1, E2)

@@expression E1; expression list E2; @@
-dev_err(E1->dev, E2)
+drm_err(E1, E2)

@@expression E1; expression list E2; @@
-dev_info_once(E1->dev, E2)
+drm_info_once(E1, E2)

@@expression E1; expression list E2; @@
-dev_notice_once(E1->dev, E2)
+drm_notice_once(E1, E2)

@@expression E1; expression list E2; @@
-dev_warn_once(E1->dev, E2)
+drm_warn_once(E1, E2)

@@expression E1; expression list E2; @@
-dev_err_once(E1->dev, E2)
+drm_err_once(E1, E2)

@@expression E1; expression list E2; @@
-dev_err_ratelimited(E1->dev, E2)
+drm_err_ratelimited(E1, E2)

@@expression E1; expression list E2; @@
-dev_dbg(E1->dev, E2)
+drm_dbg(E1, E2)

Signed-off-by: Suraj Upadhyay <usuraj35@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200718150955.GA23103@blackclown
4 years agodrm/i810: switch from 'pci_' to 'dma_' API
Christophe JAILLET [Sat, 18 Jul 2020 07:28:22 +0000 (09:28 +0200)]
drm/i810: switch from 'pci_' to 'dma_' API

The wrappers in include/linux/pci-dma-compat.h should go away.

The patch has been generated with the coccinelle script below and has been
hand modified to replace GFP_ with a correct flag.
It has been compile tested.

When memory is allocated in 'i810_dma_initialize()' GFP_KERNEL can be used
because its only caller, 'i810_dma_init()', already use it and no lock is
taken in the between.

@@
@@
-    PCI_DMA_BIDIRECTIONAL
+    DMA_BIDIRECTIONAL

@@
@@
-    PCI_DMA_TODEVICE
+    DMA_TO_DEVICE

@@
@@
-    PCI_DMA_FROMDEVICE
+    DMA_FROM_DEVICE

@@
@@
-    PCI_DMA_NONE
+    DMA_NONE

@@
expression e1, e2, e3;
@@
-    pci_alloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3;
@@
-    pci_zalloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3, e4;
@@
-    pci_free_consistent(e1, e2, e3, e4)
+    dma_free_coherent(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_single(e1, e2, e3, e4)
+    dma_map_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_single(e1, e2, e3, e4)
+    dma_unmap_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4, e5;
@@
-    pci_map_page(e1, e2, e3, e4, e5)
+    dma_map_page(&e1->dev, e2, e3, e4, e5)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_page(e1, e2, e3, e4)
+    dma_unmap_page(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_sg(e1, e2, e3, e4)
+    dma_map_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_sg(e1, e2, e3, e4)
+    dma_unmap_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
+    dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_device(e1, e2, e3, e4)
+    dma_sync_single_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
+    dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_device(e1, e2, e3, e4)
+    dma_sync_sg_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2;
@@
-    pci_dma_mapping_error(e1, e2)
+    dma_mapping_error(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_dma_mask(e1, e2)
+    dma_set_mask(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_consistent_dma_mask(e1, e2)
+    dma_set_coherent_mask(&e1->dev, e2)

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200718072822.339064-1-christophe.jaillet@wanadoo.fr
4 years agoMerge tag 'drm-misc-next-2020-07-16' of git://anongit.freedesktop.org/drm/drm-misc...
Dave Airlie [Mon, 20 Jul 2020 07:29:49 +0000 (17:29 +1000)]
Merge tag 'drm-misc-next-2020-07-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v5.9:

UAPI Changes:

Cross-subsystem Changes:
- Add ckoenig as dma-buf maintainer.
- Revert invalid fix for dma-fence-chain, and fix selftest.
- Add fixmes to amifb about APUS support.
- Use array3_size in fbcon_prepare_logo, and struct_size() in alloc_apertures.
- Fix leaks in neofb, fb/savage and omapfb.
- Other small fixes to fb code.
- Convert some dt bindings to schema for some panels, and fix simple-framebuffer dt example.

Core Changes:
- Add DRM_FORMAT_MOD_GENERIC_16_16_TILE as alias to DRM_FORMAT_MOD_SAMSUNG_16_16_TILE,
  as it can be used more generic.
- Add support for multiple DispID extension blocks in edid.
- Use https instead of http for some of the urls.
- Use drm_* macros for logging in mipi-dsi and fb-helper.
- Further cleanup ttm_mem_reg handling.
- Remove duplicated words in comments.

Driver Changes:
- Use __drm_atomic_helper_crtc_reset in all atomic drivers.
- Add Amlogic Video FBC support to meson and fourcc to core.
- Refactor hisilicon's hibmc_drv_vdac.
- Create a TXP CRTC for vc4.
- Rework cursor support in ast.
- Fix runtime PM in STM.
- Allow bigger cursors in vkms.
- Cleanup sg handling in radeon and amdgpu, and stop creating dummy
  gtt nodes with ttm fixed.
- Rework crtc handling in mgag200.
- Miscellaneous small fixes to meson, vgem, bridge/dw-hdmi,
  panel/auo,b116xw03, panel/LG LB070WV8, lima, bridge/sil_sii8620,
  virtio, tilcdc.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8b360d65-f228-9286-d247-3004156a5254@linux.intel.com
4 years agodrm/ast: Use managed MM initialization
Thomas Zimmermann [Thu, 16 Jul 2020 12:53:53 +0000 (14:53 +0200)]
drm/ast: Use managed MM initialization

Cleaning up ast's MM code with ast_mm_fini() resets the write-combine
flags on the VRAM I/O memory. Drop ast_mm_fini() in favor of an auto-
release callback. Releasing the device also executes the callback.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716125353.31512-7-tzimmermann@suse.de
4 years agodrm/ast: Initialize DRAM type before posting GPU
Thomas Zimmermann [Thu, 16 Jul 2020 12:53:52 +0000 (14:53 +0200)]
drm/ast: Initialize DRAM type before posting GPU

Posting the GPU requires the correct DRAM type to be stored in
struct ast_private. Therefore first initialize the DRAM info and
then post the GPU. This restores the original order of instructions
in this function.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Fixes: bad09da6deab ("drm/ast: Fixed vram size incorrect issue on POWER")
Cc: Joel Stanley <joel@jms.id.au>
Cc: Y.C. Chen <yc_chen@aspeedtech.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: "Y.C. Chen" <yc_chen@aspeedtech.com>
Cc: <stable@vger.kernel.org> # v4.11+
Link: https://patchwork.freedesktop.org/patch/msgid/20200716125353.31512-6-tzimmermann@suse.de
4 years agodrm/ast: Move VRAM size detection to ast_mm.c
Thomas Zimmermann [Thu, 16 Jul 2020 12:53:51 +0000 (14:53 +0200)]
drm/ast: Move VRAM size detection to ast_mm.c

VRAM size detection is only relevant to the memory management. Move
the code into ast_mm.c.

While at it, rename the function to ast_get_vram_size(). The function
argument's type is now struct ast_private. The result is stored in a
local variable and not in struct ast_private any longer.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716125353.31512-5-tzimmermann@suse.de
4 years agodrm/ast: Use managed VRAM-helper initialization
Thomas Zimmermann [Thu, 16 Jul 2020 12:53:50 +0000 (14:53 +0200)]
drm/ast: Use managed VRAM-helper initialization

As a first step to managed MM code in ast, switch over VRAM MM helpers.

v2:
* updated to use drmm_vram_helper_init()

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716125353.31512-4-tzimmermann@suse.de
4 years agodrm/ast: Rename ast_ttm.c to ast_mm.c
Thomas Zimmermann [Thu, 16 Jul 2020 12:53:49 +0000 (14:53 +0200)]
drm/ast: Rename ast_ttm.c to ast_mm.c

Although built upon TTM, the ast driver's VRAM MM helper does not
expose TTM to its users. Rename the related ast file to ast_mm.c.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716125353.31512-3-tzimmermann@suse.de
4 years agodrm/vram-helper: Managed vram helpers
Thomas Zimmermann [Thu, 16 Jul 2020 12:53:48 +0000 (14:53 +0200)]
drm/vram-helper: Managed vram helpers

Calling drmm_vram_helper_init() sets up a managed instance of
VRAM MM. Releasing the DRM device also frees the memory manager.

The patch also updates the DRM documentation for VRAM helpers. The
tutorial now describes the new managed interface. The old interfaces
are deprecated and should not be used in new code.

v2:
* rename init function to drmm_vram_helper_init()
* return errno code from init function; caller does not
  need vram_mm anyway
* update documentation and remove docs for deprecated
  un-managed functions

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716125353.31512-2-tzimmermann@suse.de
4 years agodrm/ingenic: Silence uninitialized-variable warning
Paul Cercueil [Sun, 19 Jul 2020 09:38:34 +0000 (11:38 +0200)]
drm/ingenic: Silence uninitialized-variable warning

Silence compiler warning about used but uninitialized 'ipu_state'
variable. In practice, the variable would never be used when
uninitialized, but the compiler cannot know that 'priv->ipu_plane' will
always be NULL if CONFIG_INGENIC_IPU is disabled.

Silence the warning by initializing the value to NULL.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200719093834.14084-1-paul@crapouillou.net
4 years agodrm/ingenic: Bump driver to version 1.1
Paul Cercueil [Thu, 16 Jul 2020 16:38:46 +0000 (18:38 +0200)]
drm/ingenic: Bump driver to version 1.1

Bump version to 1.1 and set date to 2020-07-16.

v3: New patch

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716163846.174790-12-paul@crapouillou.net
4 years agodrm/ingenic: Support multiple panels/bridges
Paul Cercueil [Thu, 16 Jul 2020 16:38:45 +0000 (18:38 +0200)]
drm/ingenic: Support multiple panels/bridges

Support multiple panels or bridges connected to the same DPI output of
the SoC. This setup can be found for instance on the GCW Zero, where the
same DPI output interfaces the internal 320x240 TFT panel, and the ITE
IT6610 HDMI chip.

v2: No change

v3: Allow > 80-char lines where it makes sense

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716163846.174790-11-paul@crapouillou.net
4 years agodrm/ingenic: Add support for the IPU
Paul Cercueil [Thu, 16 Jul 2020 16:38:44 +0000 (18:38 +0200)]
drm/ingenic: Add support for the IPU

Add support for the Image Processing Unit (IPU) found in all Ingenic
SoCs.

The IPU can upscale and downscale a source frame of arbitrary size
ranging from 4x4 to 4096x4096 on newer SoCs, with bicubic filtering
on newer SoCs, bilinear filtering on older SoCs. Nearest-neighbour can
also be obtained with proper coefficients.

Starting from the JZ4725B, the IPU supports a mode where its output is
sent directly to the LCDC, without having to be written to RAM first.
This makes it possible to use the IPU as a DRM plane on the compatible
SoCs, and have it convert and scale anything the userspace asks for to
what's available for the display.

Regarding pixel formats, older SoCs support packed YUV 4:2:2 and various
planar YUV formats. Newer SoCs introduced support for RGB.

Since the IPU is a separate hardware block, to make it work properly the
Ingenic DRM driver will now register itself as a component master in
case the IPU driver has been enabled in the config.

When enabled in the config, the CRTC will see the IPU as a second primary
plane. It cannot be enabled at the same time as the regular primary
plane. It has the same priority, which means that it will also display
below the overlay plane.

v2: - ingenic-ipu is no longer its own module. It will be built
      into the ingenic-drm module.
    - If enabled in the config, both the core driver and the IPU
      driver will register as components; otherwise the core
      driver will bypass that and call the ingenic_drm_bind()
      function directly.
    - Since both files now build into the same module, the
      symbols previously exported as GPL are not exported anymore,
      since they are only used internally.
    - Fix SPDX license header in ingenic-ipu.h
    - Avoid using 'for(;;);' loops without trailing statement(s)

v3: - Pass priv structure to IRQ handler; that way we don't hardcode
      the expectation that the IPU plane is at index #0.
    - Rework osd_changed() to account for src_* changes
    - Add multiplanar YUV 4:4:4 support
    - Commit fb addresses to HW at vblank, since addr registers are
      not shadow registers
    - Probe IPU component later so that IPU plane is last
    - Fix driver not working on IPU-less hardware
    - Use IPU driver's name as the IRQ name to avoid having two
      'ingenic-drm' in /proc/interrupts
    - Fix IPU only working for still images on JZ4725B
    - Add a bit more code comments

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716163846.174790-10-paul@crapouillou.net
4 years agodrm/ingenic: Add support for OSD mode
Paul Cercueil [Thu, 16 Jul 2020 16:38:43 +0000 (18:38 +0200)]
drm/ingenic: Add support for OSD mode

All Ingenic SoCs starting from the JZ4725B support OSD mode.

In this mode, two separate planes can be used. They can have different
positions and sizes, and one can be overlayed on top of the other.

v2: Use fallthrough; instead of /* fall-through */

v3: - Add custom atomic_tail function to handle case where HW gives no
      VBLANK
    - Use regmap_set_bits() / regmap_clear_bits() when possible
    - Use dma_hwdesc_f{0,1} fields in priv structure instead of array
    - Use dmam_alloc_coherent() instead of dma_alloc_coherent()
    - Use more meaningful 0xf0 / 0xf1 values as DMA descriptors IDs
    - Add a bit more code comments

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716163846.174790-9-paul@crapouillou.net
4 years agodrm/ingenic: Use dmam_alloc_coherent()
Paul Cercueil [Thu, 16 Jul 2020 16:38:42 +0000 (18:38 +0200)]
drm/ingenic: Use dmam_alloc_coherent()

Use dmam_alloc_coherent() instead of dma_alloc_coherent(). Then we don't
need to register a custom cleanup handler.

v3: New patch

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716163846.174790-8-paul@crapouillou.net
4 years agodrm/ingenic: Move register definitions to ingenic-drm.h
Paul Cercueil [Thu, 16 Jul 2020 16:38:41 +0000 (18:38 +0200)]
drm/ingenic: Move register definitions to ingenic-drm.h

Move the register definitions to ingenic-drm.h, to keep
ingenic-drm-drv.c tidy.

v2: Fix SPDX license tag
v3: No change

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716163846.174790-7-paul@crapouillou.net
4 years agodrm/ingenic: Set DMA descriptor chain address in probe
Paul Cercueil [Thu, 16 Jul 2020 16:38:40 +0000 (18:38 +0200)]
drm/ingenic: Set DMA descriptor chain address in probe

The address of the DMA descriptor never changes. It can therefore be set
in the probe function.

v2-v3: No change

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716163846.174790-6-paul@crapouillou.net
4 years agodrm/ingenic: Add missing CR in debug strings
Paul Cercueil [Thu, 16 Jul 2020 16:38:39 +0000 (18:38 +0200)]
drm/ingenic: Add missing CR in debug strings

If you pass a string that is not terminated with a carriage return to
dev_err(), it will eventually be printed with a carriage return, but
not right away, since the kernel will wait for a pr_cont().

v2: New patch
v3: No change

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716163846.174790-5-paul@crapouillou.net
4 years agodrm/ingenic: Rename ingenic-drm.c to ingenic-drm-drv.c
Paul Cercueil [Thu, 16 Jul 2020 16:38:38 +0000 (18:38 +0200)]
drm/ingenic: Rename ingenic-drm.c to ingenic-drm-drv.c

Full rename without any modification, except to the Makefile.

Renaming ingenic-drm.c to ingenic-drm-drv.c allow to decouple the module
name from the source file name in the Makefile. This will be useful
later when more source files are added.

v2: New patch
v3: No change

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716163846.174790-4-paul@crapouillou.net
4 years agodt-bindings: display: Add ingenic,ipu.yaml
Paul Cercueil [Thu, 16 Jul 2020 16:38:37 +0000 (18:38 +0200)]
dt-bindings: display: Add ingenic,ipu.yaml

Add documentation of the Device Tree bindings for the Image Processing
Unit (IPU) found in most Ingenic SoCs.

v2: Add missing 'const' in items list
v3: No change

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716163846.174790-3-paul@crapouillou.net
4 years agodt-bindings: display: Convert ingenic,lcd.txt to YAML
Paul Cercueil [Thu, 16 Jul 2020 16:38:36 +0000 (18:38 +0200)]
dt-bindings: display: Convert ingenic,lcd.txt to YAML

Convert the ingenic,lcd.txt to a new ingenic,lcd.yaml file.

In the process, the new ingenic,jz4780-lcd compatible string has been
added.

v2: Add info about IPU at port@8
v3: No change

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716163846.174790-2-paul@crapouillou.net
4 years agodrm/ingenic: Fix incorrect assumption about plane->index
Paul Cercueil [Thu, 16 Jul 2020 16:38:35 +0000 (18:38 +0200)]
drm/ingenic: Fix incorrect assumption about plane->index

plane->index is NOT the index of the color plane in a YUV frame.
Actually, a YUV frame is represented by a single drm_plane, even though
it contains three Y, U, V planes.

v2-v3: No change

Cc: stable@vger.kernel.org # v5.3
Fixes: 90b86fcc47b4 ("DRM: Add KMS driver for the Ingenic JZ47xx SoCs")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716163846.174790-1-paul@crapouillou.net
4 years agodrm/nouveau/kms/nvd9-: Fix disabling CRCs alongside OR reprogramming
Lyude Paul [Mon, 29 Jun 2020 22:36:25 +0000 (18:36 -0400)]
drm/nouveau/kms/nvd9-: Fix disabling CRCs alongside OR reprogramming

While I had thought I'd tested this before, it looks like this one issue
slipped by my original CRC patches. Basically, there seem to be a few
rules we need to follow when sending CRC commands to the display
controller:

* CRCs cannot be both disabled and enabled for a single head in the same
  flush
* If a head with CRC reporting enabled switches from one OR to another,
  there must be a flush before the OR is re-enabled regardless of the
  final state of CRC reporting.

So, split nv50_crc_atomic_prepare_notifier_contexts() into two
functions:
* nv_crc_atomic_release_notifier_contexts() - checks whether the CRC
  notifier contexts were released successfully after the first flush
* nv_crc_atomic_init_notifier_contexts() - prepares any CRC notifier
  contexts for use before enabling reporting

Additionally, in order to force a flush when we re-assign ORs with heads
that have CRCs enabled we split our atomic check function into two:

* nv50_crc_atomic_check_head() - called from our heads' atomic checks,
  determines whether a state needs to set or clear CRC reporting
* nv50_crc_atomic_check_outp() - called at the end of the atomic check
  after all ORs have been added to the atomic state, and sets
  nv50_atom->flush_disable if needed

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <skeggsb@gmail.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200629223635.103804-1-lyude@redhat.com
4 years agodrm/nouveau/kms/nvd9-: Add CRC support
Lyude Paul [Mon, 7 Oct 2019 18:20:12 +0000 (14:20 -0400)]
drm/nouveau/kms/nvd9-: Add CRC support

This introduces support for CRC readback on gf119+, using the
documentation generously provided to us by Nvidia:

https://github.com/NVIDIA/open-gpu-doc/blob/master/Display-CRC/display-crc.txt

We expose all available CRC sources. SF, SOR, PIOR, and DAC are exposed
through a single set of "outp" sources: outp-active/auto for a CRC of
the scanout region, outp-complete for a CRC of both the scanout and
blanking/sync region combined, and outp-inactive for a CRC of only the
blanking/sync region. For each source, nouveau selects the appropriate
tap point based on the output path in use. We also expose an "rg"
source, which allows for capturing CRCs of the scanout raster before
it's encoded into a video signal in the output path. This tap point is
referred to as the raster generator.

Note that while there's some other neat features that can be used with
CRC capture on nvidia hardware, like capturing from two CRC sources
simultaneously, I couldn't see any usecase for them and did not
implement them.

Nvidia only allows for accessing CRCs through a shared DMA region that
we program through the core EVO/NvDisplay channel which is referred to
as the notifier context. The notifier context is limited to either 255
(for Fermi-Pascal) or 2047 (Volta+) entries to store CRCs in, and
unfortunately the hardware simply drops CRCs and reports an overflow
once all available entries in the notifier context are filled.

Since the DRM CRC API and igt-gpu-tools don't expect there to be a limit
on how many CRCs can be captured, we work around this in nouveau by
allocating two separate notifier contexts for each head instead of one.
We schedule a vblank worker ahead of time so that once we start getting
close to filling up all of the available entries in the notifier
context, we can swap the currently used notifier context out with
another pre-prepared notifier context in a manner similar to page
flipping.

Unfortunately, the hardware only allows us to this by flushing two
separate updates on the core channel: one to release the current
notifier context handle, and one to program the next notifier context's
handle. When the hardware processes the first update, the CRC for the
current frame is lost. However, the second update can be flushed
immediately without waiting for the first to complete so that CRC
generation resumes on the next frame. According to Nvidia's hardware
engineers, there isn't any cleaner way of flipping notifier contexts
that would avoid this.

Since using vblank workers to swap out the notifier context will ensure
we can usually flush both updates to hardware within the timespan of a
single frame, we can also ensure that there will only be exactly one
frame lost between the first and second update being executed by the
hardware. This gives us the guarantee that we're always correctly
matching each CRC entry with it's respective frame even after a context
flip. And since IGT will retrieve the CRC entry for a frame by waiting
until it receives a CRC for any subsequent frames, this doesn't cause an
issue with any tests and is much simpler than trying to change the
current DRM API to accommodate.

In order to facilitate testing of correct handling of this limitation,
we also expose a debugfs interface to manually control the threshold for
when we start trying to flip the notifier context. We will use this in
igt to trigger a context flip for testing purposes without needing to
wait for the notifier to completely fill up. This threshold is reset
to the default value set by nouveau after each capture, and is exposed
in a separate folder within each CRTC's debugfs directory labelled
"nv_crc".

Changes since v1:
* Forgot to finish saving crc.h before saving, whoops. This just adds
  some corrections to the empty function declarations that we use if
  CONFIG_DEBUG_FS isn't enabled.
Changes since v2:
* Don't check return code from debugfs_create_dir() or
  debugfs_create_file() - Greg K-H
Changes since v3:
  (no functional changes)
* Fix SPDX license identifiers (checkpatch)
* s/uint32_t/u32/ (checkpatch)
* Fix indenting in switch cases (checkpatch)
Changes since v4:
* Remove unneeded param changes with nv50_head_flush_clr/set
* Rebase
Changes since v5:
* Remove set but unused variable (outp) in nv50_crc_atomic_check() -
  Kbuild bot

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200627194657.156514-10-lyude@redhat.com
4 years agodrm/nouveau/kms/nv50-: Move hard-coded object handles into header
Lyude Paul [Tue, 21 Jan 2020 20:53:46 +0000 (15:53 -0500)]
drm/nouveau/kms/nv50-: Move hard-coded object handles into header

While most of the functionality on Nvidia GPUs doesn't require using an
explicit handle instead of the main VRAM handle + offset, there are a
couple of places that do require explicit handles, such as CRC
functionality. Since this means we're about to add another
nouveau-chosen handle, let's just go ahead and move any hard-coded
handles into a single header. This is just to keep things slightly
organized, and to make it a little bit easier if we need to add more
handles in the future.

This patch should contain no functional changes.

Changes since v3:
* Correct SPDX license identifier (checkpatch)

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200627194657.156514-9-lyude@redhat.com
4 years agodrm/nouveau/kms/nv50-: Expose nv50_outp_atom in disp.h
Lyude Paul [Fri, 7 Feb 2020 19:10:46 +0000 (14:10 -0500)]
drm/nouveau/kms/nv50-: Expose nv50_outp_atom in disp.h

In order to make sure that we flush disable updates at the right time
when disabling CRCs, we'll need to be able to look at the outp state to
see if we're changing it at the same time that we're disabling CRCs.

So, expose the struct in disp.h.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200627194657.156514-8-lyude@redhat.com
4 years agodrm/nouveau/kms/nv140-: Track wndw mappings in nv50_head_atom
Lyude Paul [Thu, 6 Feb 2020 19:37:36 +0000 (14:37 -0500)]
drm/nouveau/kms/nv140-: Track wndw mappings in nv50_head_atom

While we're not quite ready yet to add support for flexible wndw
mappings, we are going to need to at least keep track of the static wndw
mappings we're currently using in each head's atomic state. We'll likely
use this in the future to implement real flexible window mapping, but
the primary reason we'll need this is for CRC support.

See: on nvidia hardware, each CRC entry in the CRC notifier dma context
has a "tag". This tag corresponds to the nth update on a specific
EVO/NvDisplay channel, which itself is referred to as the "controlling
channel". For gf119+ this can be the core channel, ovly channel, or base
channel. Since we don't expose CRC entry tags to userspace, we simply
ignore this feature and always use the core channel as the controlling
channel. Simple.

Things get a little bit more complicated on gv100+ though. GV100+ only
lets us set the controlling channel to a specific wndw channel, and that
wndw must be owned by the head that we're grabbing CRCs when we enable
CRC generation. Thus, we always need to make sure that each atomic head
state has at least one wndw that is mapped to the head, which will be
used as the controlling channel.

Note that since we don't have flexible wndw mappings yet, we don't
expect to run into any scenarios yet where we'd have a head with no
mapped wndws. When we do add support for flexible wndw mappings however,
we'll need to make sure that we handle reprogramming CRC capture if our
controlling wndw is moved to another head (and potentially reject the
new head state entirely if we can't find another available wndw to
replace it).

With that being said, nouveau currently tracks wndw visibility on heads.
It does not keep track of the actual ownership mappings, which are
(currently) statically programmed. To fix this, we introduce another
bitmask into nv50_head_atom.wndw to keep track of ownership separately
from visibility. We then introduce a nv50_head callback to handle
populating the wndw ownership map, and call it during the atomic check
phase when core->assign_windows is set to true.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200627194657.156514-7-lyude@redhat.com
4 years agodrm/nouveau/kms/nv50-: Fix disabling dithering
Lyude Paul [Tue, 17 Mar 2020 18:54:06 +0000 (14:54 -0400)]
drm/nouveau/kms/nv50-: Fix disabling dithering

While we expose the ability to turn off hardware dithering for nouveau,
we actually make the mistake of turning it on anyway, due to
dithering_depth containing a non-zero value if our dithering depth isn't
also set to 6 bpc.

So, fix it by never enabling dithering when it's disabled.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200627194657.156514-6-lyude@redhat.com
4 years agodrm/nouveau/kms/nv140-: Don't modify depth in state during atomic commit
Lyude Paul [Fri, 13 Dec 2019 22:06:59 +0000 (17:06 -0500)]
drm/nouveau/kms/nv140-: Don't modify depth in state during atomic commit

Currently, we modify the depth value stored in the atomic state when
performing a commit in order to workaround the fact we haven't
implemented support for depths higher then 10 yet. This isn't idempotent
though, as it will happen every atomic commit where we modify the OR
state even if the head's depth in the atomic state hasn't been modified.

Normally this wouldn't matter, since we don't modify OR state outside of
modesets, but since the CRC capture region is implemented as part of the
OR state in hardware we'll want to make sure all commits modifying OR
state are idempotent so as to avoid changing the depth unexpectedly.

So, fix this by simply not writing the reduced depth value we come up
with to the atomic state.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200627194657.156514-5-lyude@redhat.com
4 years agodrm/vblank: Add vblank works
Lyude Paul [Fri, 17 Apr 2020 19:33:13 +0000 (15:33 -0400)]
drm/vblank: Add vblank works

Add some kind of vblank workers. The interface is similar to regular
delayed works, and is mostly based off kthread_work. It allows for
scheduling delayed works that execute once a particular vblank sequence
has passed. It also allows for accurate flushing of scheduled vblank
works - in that flushing waits for both the vblank sequence and job
execution to complete, or for the work to get cancelled - whichever
comes first.

Whatever hardware programming we do in the work must be fast (must at
least complete during the vblank or scanout period, sometimes during the
first few scanlines of the vblank). As such we use a high-priority
per-CRTC thread to accomplish this.

Changes since v7:
* Stuff drm_vblank_internal.h and drm_vblank_work_internal.h contents
  into drm_internal.h
* Get rid of unnecessary spinlock in drm_crtc_vblank_on()
* Remove !vblank->worker check
* Grab vbl_lock in drm_vblank_work_schedule()
* Mention self-rearming work items in drm_vblank_work_schedule() kdocs
* Return 1 from drm_vblank_work_schedule() if the work was scheduled
  successfully, 0 or error code otherwise
* Use drm_dbg_core() instead of DRM_DEV_ERROR() in
  drm_vblank_work_schedule()
* Remove vblank->worker checks in drm_vblank_destroy_worker() and
  drm_vblank_flush_worker()
Changes since v6:
* Get rid of ->pending and seqcounts, and implement flushing through
  simpler means - danvet
* Get rid of work_lock, just use drm_device->event_lock
* Move drm_vblank_work item cleanup into drm_crtc_vblank_off() so that
  we ensure that all vblank work has finished before disabling vblanks
* Add checks into drm_crtc_vblank_reset() so we yell if it gets called
  while there's vblank workers active
* Grab event_lock in both drm_crtc_vblank_on()/drm_crtc_vblank_off(),
  the main reason for this is so that other threads calling
  drm_vblank_work_schedule() are blocked from attempting to schedule
  while we're in the middle of enabling/disabling vblanks.
* Move drm_handle_vblank_works() call below drm_handle_vblank_events()
* Simplify drm_vblank_work_cancel_sync()
* Fix drm_vblank_work_cancel_sync() documentation
* Move wake_up_all() calls out of spinlock where we can. The only one I
  left was the call to wake_up_all() in drm_vblank_handle_works() as
  this seemed like it made more sense just living in that function
  (which is all technically under lock)
* Move drm_vblank_work related functions into their own source files
* Add drm_vblank_internal.h so we can export some functions we don't
  want drivers using, but that we do need to use in drm_vblank_work.c
* Add a bunch of documentation
Changes since v4:
* Get rid of kthread interfaces we tried adding and move all of the
  locking into drm_vblank.c. For implementing drm_vblank_work_flush(),
  we now use a wait_queue and sequence counters in order to
  differentiate between multiple work item executions.
* Get rid of drm_vblank_work_cancel() - this would have been pretty
  difficult to actually reimplement and it occurred to me that neither
  nouveau or i915 are even planning to use this function. Since there's
  also no async cancel function for most of the work interfaces in the
  kernel, it seems a bit unnecessary anyway.
* Get rid of to_drm_vblank_work() since we now are also able to just
  pass the struct drm_vblank_work to work item callbacks anyway
Changes since v3:
* Use our own spinlocks, don't integrate so tightly with kthread_works
Changes since v2:
* Use kthread_workers instead of reinventing the wheel.

Cc: Tejun Heo <tj@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Co-developed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200627194657.156514-4-lyude@redhat.com
4 years agodrm/vblank: Use spin_(un)lock_irq() in drm_crtc_vblank_off()
Lyude Paul [Tue, 23 Jun 2020 20:24:00 +0000 (16:24 -0400)]
drm/vblank: Use spin_(un)lock_irq() in drm_crtc_vblank_off()

This got me confused for a bit while looking over this code: I had been
planning on adding some blocking function calls into this function, but
seeing the irqsave/irqrestore variants of spin_(un)lock() didn't make it
very clear whether or not that would actually be safe.

So I went ahead and reviewed every single driver in the kernel that uses
this function, and they all fall into three categories:

* Driver probe code
* ->atomic_disable() callbacks
* Legacy modesetting callbacks

All of these will be guaranteed to have IRQs enabled, which means it's
perfectly safe to block here. Just to make things a little less
confusing to others in the future, let's switch over to
spin_lock_irq()/spin_unlock_irq() to make that fact a little more
obvious.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200627194657.156514-3-lyude@redhat.com
4 years agodrm/vblank: Register drmm cleanup action once per drm_vblank_crtc
Lyude Paul [Tue, 14 Apr 2020 16:34:52 +0000 (12:34 -0400)]
drm/vblank: Register drmm cleanup action once per drm_vblank_crtc

Since we'll be allocating resources for kthread_create_worker() in the
next commit (which could fail and require us to clean up the mess),
let's simplify the cleanup process a bit by registering a
drm_vblank_init_release() action for each drm_vblank_crtc so they're
still cleaned up if we fail to initialize one of them.

Changes since v3:
* Use drmm_add_action_or_reset() - Daniel Vetter

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200627194657.156514-2-lyude@redhat.com
4 years agodrm/tidss: Replace HTTP links with HTTPS ones
Alexander A. Klimov [Mon, 13 Jul 2020 12:39:13 +0000 (14:39 +0200)]
drm/tidss: Replace HTTP links with HTTPS ones

Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
  If not .svg:
    For each line:
      If doesn't contain `\bxmlns\b`:
        For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
  If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
            If both the HTTP and HTTPS versions
            return 200 OK and serve the same content:
              Replace HTTP with HTTPS.

Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Acked-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200713123913.34205-1-grandmaster@al2klimov.de
4 years agodrm/vboxvideo: Replace HTTP links with HTTPS ones
Alexander A. Klimov [Mon, 13 Jul 2020 12:49:23 +0000 (14:49 +0200)]
drm/vboxvideo: Replace HTTP links with HTTPS ones

Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
  If not .svg:
    For each line:
      If doesn't contain `\bxmlns\b`:
        For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
  If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
            If both the HTTP and HTTPS versions
            return 200 OK and serve the same content:
              Replace HTTP with HTTPS.

Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200713124923.34282-1-grandmaster@al2klimov.de
4 years agodt-bindings: display: panel-dsi-cm: convert to YAML
Sebastian Reichel [Thu, 16 Jul 2020 12:57:30 +0000 (14:57 +0200)]
dt-bindings: display: panel-dsi-cm: convert to YAML

Convert panel-dsi-cm bindings to YAML and add
missing properties while at it.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716125733.83654-2-sebastian.reichel@collabora.com
4 years agodrm/panel-simple: Add 50 Hz mode to the Frida FRD350H54004 panel
Paul Cercueil [Thu, 16 Jul 2020 12:56:47 +0000 (14:56 +0200)]
drm/panel-simple: Add 50 Hz mode to the Frida FRD350H54004 panel

By changing the pixel clock and the length of the back porch, it is
possible to obtain a perfect 50 Hz refresh rate.

v2: Rebase on drm-misc-next

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716125647.10964-2-paul@crapouillou.net
4 years agodrm/panel-simple: Fix inverted V/H SYNC for Frida FRD350H54004 panel
Paul Cercueil [Thu, 16 Jul 2020 12:56:46 +0000 (14:56 +0200)]
drm/panel-simple: Fix inverted V/H SYNC for Frida FRD350H54004 panel

The FRD350H54004 panel was marked as having active-high VSYNC and HSYNC
signals, which sorts-of worked, but resulted in the picture fading out
under certain circumstances.

Fix this issue by marking VSYNC and HSYNC signals active-low.

v2: Rebase on drm-misc-next

Fixes: 7b6bd8433609 ("drm/panel: simple: Add support for the Frida FRD350H54004 panel")
Cc: stable@vger.kernel.org # v5.5
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716125647.10964-1-paul@crapouillou.net
4 years agodrm: drm_rect.h: delete duplicated word in comment
Randy Dunlap [Wed, 15 Jul 2020 05:23:49 +0000 (22:23 -0700)]
drm: drm_rect.h: delete duplicated word in comment

Drop doubled word "the" in a comment.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200715052349.23319-7-rdunlap@infradead.org
4 years agodrm: msm_drm.h: delete duplicated words in comments
Randy Dunlap [Wed, 15 Jul 2020 05:23:48 +0000 (22:23 -0700)]
drm: msm_drm.h: delete duplicated words in comments

Drop the doubled word "to" in comments.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200715052349.23319-6-rdunlap@infradead.org
4 years agodrm: i915_drm.h: delete duplicated words in comments
Randy Dunlap [Wed, 15 Jul 2020 05:23:47 +0000 (22:23 -0700)]
drm: i915_drm.h: delete duplicated words in comments

Drop doubled words "the" and "be" in comments.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200715052349.23319-5-rdunlap@infradead.org
4 years agodrm: drm_mode_config.h: delete duplicated words in comments
Randy Dunlap [Wed, 15 Jul 2020 05:23:46 +0000 (22:23 -0700)]
drm: drm_mode_config.h: delete duplicated words in comments

Drop doubled word "is" in several comments.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200715052349.23319-4-rdunlap@infradead.org
4 years agodrm: drm_gem.h: delete duplicated words in comments
Randy Dunlap [Wed, 15 Jul 2020 05:23:45 +0000 (22:23 -0700)]
drm: drm_gem.h: delete duplicated words in comments

Drop the doubled words "the" and "by" in comments.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200715052349.23319-3-rdunlap@infradead.org
4 years agodrm: drm_bridge.h: delete duplicated word in comment
Randy Dunlap [Wed, 15 Jul 2020 05:23:44 +0000 (22:23 -0700)]
drm: drm_bridge.h: delete duplicated word in comment

Drop doubled word "should" in a comment.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200715052349.23319-2-rdunlap@infradead.org
4 years agodrm: drm_atomic.h: delete duplicated word in comment
Randy Dunlap [Wed, 15 Jul 2020 05:23:43 +0000 (22:23 -0700)]
drm: drm_atomic.h: delete duplicated word in comment

Drop doubled word "than" in a comment.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200715052349.23319-1-rdunlap@infradead.org
4 years agodrm/virtio: Remove open-coded commit-tail function
Daniel Vetter [Thu, 9 Jul 2020 12:33:39 +0000 (14:33 +0200)]
drm/virtio: Remove open-coded commit-tail function

Exactly matches the one in the helpers.

This avoids me having to roll out dma-fence critical section
annotations to this copy.

Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: virtualization@lists.linux-foundation.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200709123339.547390-2-daniel.vetter@ffwll.ch
4 years agodrm/tilcdc: Use standard drm_atomic_helper_commit
Daniel Vetter [Wed, 8 Jul 2020 14:20:50 +0000 (16:20 +0200)]
drm/tilcdc: Use standard drm_atomic_helper_commit

Gives us proper nonblocking support for free, and a pile of other
things. The tilcdc code is simply old enough that it was never
converted over, but was stuck forever with the copypasta from when it
was initially merged.

The riskiest thing with this conversion is maybe that there's an issue
with the vblank handling or vblank event handling, which will upset
the modern commit support in atomic helpers. But from a cursory review
drm_crtc_vblank_on/off is called in the right places, and the event
handling also seems to exist (albeit with much hand-rolling and
probably some races, could perhaps be converted over to
drm_crtc_arm_vblank_event without any real loss).

Motivated by me not having to hand-roll the dma-fence annotations for
this.

v2: Clear out crtc_state->event when we're handling the event, to
avoid upsetting the helpers (reported by Jyri).

v3: Also send out even whent the crtc is getting disabled. Tilcdc looks a
bit like conversion to simple display helpers would work out really
nice.

Tested-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200708142050.530240-1-daniel.vetter@ffwll.ch
4 years agodrm/mgag200: Inline mga_crtc_{prepare, commit}() into enable function
Thomas Zimmermann [Tue, 7 Jul 2020 08:24:11 +0000 (10:24 +0200)]
drm/mgag200: Inline mga_crtc_{prepare, commit}() into enable function

There's only trivial code left in mga_crtc_{prepare,commit}(). Merge the
functions into the simple pipe's enable function.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200707082411.6583-8-tzimmermann@suse.de
4 years agodrm/mgag200: Rename G200WB prepare/commit function
Thomas Zimmermann [Tue, 7 Jul 2020 08:24:10 +0000 (10:24 +0200)]
drm/mgag200: Rename G200WB prepare/commit function

The prepare and commit helpers for G200WB devices control the BMC.
Rename them accordingly. While at it, also change the passed value's
type to struct mga_device and remove some type upcasting.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200707082411.6583-7-tzimmermann@suse.de
4 years agodrm/mgag200: Set/clear <syncrst> field in display enable/disable helpers
Thomas Zimmermann [Tue, 7 Jul 2020 08:24:09 +0000 (10:24 +0200)]
drm/mgag200: Set/clear <syncrst> field in display enable/disable helpers

Modifying the <syncrst> field in mgag200_{enable,disable}_display()
makes the code more readable. Also clear the <asyncrst> field to enable
the display. The other bits in SEQ0 are unused, so no functional changes
are made.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200707082411.6583-6-tzimmermann@suse.de
4 years agodrm/mgag200: Split DPMS function into helpers
Thomas Zimmermann [Tue, 7 Jul 2020 08:24:08 +0000 (10:24 +0200)]
drm/mgag200: Split DPMS function into helpers

Of the DPMS code, only ON and OFF states are used. Simplify mode setting
by moving both into separate functions and removing the rest.

The original code busy waited in the middle of updating the screen state
in SEQ1. To simplify the procedure, the new code busy waits first and then
updates SEQ1 in one chunk.

The DPMS code also set the LUT before enabling the screen. The patch moves
this code into the simple-display pipe's enable function.

v2:
* comment on SEQ1 updates in commit message

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200707082411.6583-5-tzimmermann@suse.de
4 years agodrm/mgag200: Don't set or clear <scroff> field during modeset
Thomas Zimmermann [Tue, 7 Jul 2020 08:24:07 +0000 (10:24 +0200)]
drm/mgag200: Don't set or clear <scroff> field during modeset

The simple pipe's disable function disables the screen by calling
mgag200_disable_screen(). The simple pipe's enable function enables the
screen by calling mgag200_enable_display().

During modeset operations the screen is off and remains off. It's only
enabled after the modeset has been completed. Therefore remove all code
that sets or clears the <scroff> field while in modeset.

The related code also modifies the <syncrst> field in SEQ0. For now, keep
this code in place.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200707082411.6583-4-tzimmermann@suse.de
4 years agodrm/mgag200: Move PLL setup out of mode-setting function
Thomas Zimmermann [Tue, 7 Jul 2020 08:24:06 +0000 (10:24 +0200)]
drm/mgag200: Move PLL setup out of mode-setting function

Makes the code slightly more flexible. No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200707082411.6583-3-tzimmermann@suse.de
4 years agodrm/mgag200: Don't write-protect CRTC 0-7 while in mga_crtc_prepare()
Thomas Zimmermann [Tue, 7 Jul 2020 08:24:05 +0000 (10:24 +0200)]
drm/mgag200: Don't write-protect CRTC 0-7 while in mga_crtc_prepare()

The prepare function write-protects several registers that it doesn't
even touch. Removed the related code.

The code for unprotecting registers also clears VINT interrupts. Both
is now done once during initialization.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200707082411.6583-2-tzimmermann@suse.de
4 years agodrm/bridge: sil_sii8620: initialize return of sii8620_readb
Tom Rix [Sun, 12 Jul 2020 15:24:53 +0000 (08:24 -0700)]
drm/bridge: sil_sii8620: initialize return of sii8620_readb

clang static analysis flags this error

sil-sii8620.c:184:2: warning: Undefined or garbage value
  returned to caller [core.uninitialized.UndefReturn]
        return ret;
        ^~~~~~~~~~

sii8620_readb calls sii8620_read_buf.
sii8620_read_buf can return without setting its output
pararmeter 'ret'.

So initialize ret.

Fixes: ce6e153f414a ("drm/bridge: add Silicon Image SiI8620 driver")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200712152453.27510-1-trix@redhat.com
4 years agodrm/amdgpu: stop allocating dummy GTT nodes
Christian König [Mon, 6 Jul 2020 17:23:46 +0000 (19:23 +0200)]
drm/amdgpu: stop allocating dummy GTT nodes

Now that TTM is fixed up we can finally stop that nonsense.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Madhav Chauhan <madhav.chauhan@amd.com>
Link: https://patchwork.freedesktop.org/patch/375620
4 years agodrm/ttm: further cleanup ttm_mem_reg handling
Christian König [Mon, 6 Jul 2020 15:32:55 +0000 (17:32 +0200)]
drm/ttm: further cleanup ttm_mem_reg handling

Stop touching the backend private pointer alltogether and
make sure we never put the same mem twice by.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Madhav Chauhan <madhav.chauhan@amd.com>
Link: https://patchwork.freedesktop.org/patch/375613/
4 years agodrm: radeon: fix common struct sg_table related issues
Marek Szyprowski [Fri, 19 Jun 2020 10:36:17 +0000 (12:36 +0200)]
drm: radeon: fix common struct sg_table related issues

The Documentation/DMA-API-HOWTO.txt states that the dma_map_sg() function
returns the number of the created entries in the DMA address space.
However the subsequent calls to the dma_sync_sg_for_{device,cpu}() and
dma_unmap_sg must be called with the original number of the entries
passed to the dma_map_sg().

struct sg_table is a common structure used for describing a non-contiguous
memory buffer, used commonly in the DRM and graphics subsystems. It
consists of a scatterlist with memory pages and DMA addresses (sgl entry),
as well as the number of scatterlist entries: CPU pages (orig_nents entry)
and DMA mapped pages (nents entry).

It turned out that it was a common mistake to misuse nents and orig_nents
entries, calling DMA-mapping functions with a wrong number of entries or
ignoring the number of mapped entries returned by the dma_map_sg()
function.

To avoid such issues, lets use a common dma-mapping wrappers operating
directly on the struct sg_table objects and use scatterlist page
iterators where possible. This, almost always, hides references to the
nents and orig_nents entries, making the code robust, easier to follow
and copy/paste safe.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/371172/
Signed-off-by: Christian König <christian.koenig@amd.com>
4 years agodrm: amdgpu: fix common struct sg_table related issues
Marek Szyprowski [Fri, 19 Jun 2020 10:36:04 +0000 (12:36 +0200)]
drm: amdgpu: fix common struct sg_table related issues

The Documentation/DMA-API-HOWTO.txt states that the dma_map_sg() function
returns the number of the created entries in the DMA address space.
However the subsequent calls to the dma_sync_sg_for_{device,cpu}() and
dma_unmap_sg must be called with the original number of the entries
passed to the dma_map_sg().

struct sg_table is a common structure used for describing a non-contiguous
memory buffer, used commonly in the DRM and graphics subsystems. It
consists of a scatterlist with memory pages and DMA addresses (sgl entry),
as well as the number of scatterlist entries: CPU pages (orig_nents entry)
and DMA mapped pages (nents entry).

It turned out that it was a common mistake to misuse nents and orig_nents
entries, calling DMA-mapping functions with a wrong number of entries or
ignoring the number of mapped entries returned by the dma_map_sg()
function.

To avoid such issues, lets use a common dma-mapping wrappers operating
directly on the struct sg_table objects and use scatterlist page
iterators where possible. This, almost always, hides references to the
nents and orig_nents entries, making the code robust, easier to follow
and copy/paste safe.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/371142/
Signed-off-by: Christian König <christian.koenig@amd.com>
4 years agodrm/lima: Expose job_hang_limit module parameter
Andrey Lebedev [Fri, 19 Jun 2020 07:58:59 +0000 (10:58 +0300)]
drm/lima: Expose job_hang_limit module parameter

Some pp or gp jobs can be successfully repeated even after they time outs.
Introduce lima module parameter to specify number of times a job can hang
before being dropped.

Signed-off-by: Andrey Lebedev <andrey@lebedev.lt>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200619075900.3030696-1-andrey.lebedev@gmail.com
4 years agodrm/vkms: change the max cursor width/height
Melissa Wen [Fri, 10 Jul 2020 16:03:13 +0000 (13:03 -0300)]
drm/vkms: change the max cursor width/height

This change expands the coverage for the IGT kms_cursor_crc test, where
the size varies between 64 and 512 for a square cursor. With this, in
addition to the cursor 64x64, this patch enables the test of cursors with
sizes: 128x128, 256x256, and 512x512.

Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Reviewed-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200710160313.xjoz6ereyma5vkc3@smtp.gmail.com
4 years agodrm: panel: simple: Fix bpc for LG LB070WV8 panel
Laurent Pinchart [Sat, 11 Jul 2020 22:53:17 +0000 (01:53 +0300)]
drm: panel: simple: Fix bpc for LG LB070WV8 panel

The LG LB070WV8 panel incorrectly reports a 16 bits per component value,
while the panel uses 8 bits per component. Fix it.

Fixes: dd0150026901 ("drm/panel: simple: Add support for LG LB070WV8 800x480 7" panel")
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200711225317.28476-1-laurent.pinchart+renesas@ideasonboard.com
4 years agodrm/panel: auo,b116xw03: fix flash backlight when power on
Jitao Shi [Sun, 5 Jul 2020 09:45:14 +0000 (17:45 +0800)]
drm/panel: auo,b116xw03: fix flash backlight when power on

Delay the backlight on to make sure the video stable.

Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200705094514.34526-1-jitao.shi@mediatek.com
4 years agodt-bindings: fix simple-framebuffer example
Sam Ravnborg [Sat, 4 Jul 2020 14:35:44 +0000 (16:35 +0200)]
dt-bindings: fix simple-framebuffer example

Now that dt-extract-example gained support for using root nodes
in examples, update the example for the simple-frambuffer binding to use it.

This gives us a better example and kill a long standing warning:

simple-framebuffer.example.dts:23.16-39.11:
Warning (chosen_node_is_root): /example-0/chosen: chosen node must be at root node

Note: To get the update dt-extract-example execute:
pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade

v2:
  - fix spelling of framebuffer (Geert)
  - drop stdout-path (Rob)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: linux-fbdev@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200704143544.789345-2-sam@ravnborg.org
4 years agodt-bindings: display: convert sharp,lq101r1sx01 to DT Schema
Sam Ravnborg [Sat, 4 Jul 2020 10:28:06 +0000 (12:28 +0200)]
dt-bindings: display: convert sharp,lq101r1sx01 to DT Schema

This binding describes a panel with a secondary channel.

v3:
  - Add reg property and unit-address to dsi nodes (Rob)

v2:
  - add check for required properties if link2 is present (Rob)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200704102806.735713-4-sam@ravnborg.org
4 years agodt-bindings: display: convert samsung,s6e8aa0 to DT Schema
Sam Ravnborg [Sat, 4 Jul 2020 10:28:05 +0000 (12:28 +0200)]
dt-bindings: display: convert samsung,s6e8aa0 to DT Schema

v2:
  - Add missing types (Rob)
  - Fix example to specify panel@0 (Rob)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200704102806.735713-3-sam@ravnborg.org
4 years agodt-bindings: display: convert innolux,p079zca to DT Schema
Sam Ravnborg [Sat, 4 Jul 2020 10:28:04 +0000 (12:28 +0200)]
dt-bindings: display: convert innolux,p079zca to DT Schema

As the binding matches panel-simple-dsi, added the compatible to the
panel-simple-dsi list.
With this change enable-gpios is now optional.

v2:
  - It is a DSI panel, add it to panel-simple-dsi (Rob)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Chris Zhong <zyw@rock-chips.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200704102806.735713-2-sam@ravnborg.org
4 years agodrm: fb-helper: Convert logging to drm_* functions.
Suraj Upadhyay [Tue, 7 Jul 2020 16:37:21 +0000 (22:07 +0530)]
drm: fb-helper: Convert logging to drm_* functions.

Change logging information from dev_info() to drm_info().

Signed-off-by: Suraj Upadhyay <usuraj35@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/0d37c7a614eb0885f0f0bed18e48a4d26b345a8e.1594136880.git.usuraj35@gmail.com
4 years agodrm: mipi-dsi: Convert logging to drm_* functions.
Suraj Upadhyay [Tue, 7 Jul 2020 16:28:48 +0000 (21:58 +0530)]
drm: mipi-dsi: Convert logging to drm_* functions.

Convert logging errors from dev_err() to drm_err().

Signed-off-by: Suraj Upadhyay <usuraj35@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/feeec2816debcf4105ac22af1661fd2d491d02b9.1594136880.git.usuraj35@gmail.com
4 years agodrm/bridge: Replace HTTP links with HTTPS ones
Alexander A. Klimov [Wed, 8 Jul 2020 12:16:04 +0000 (14:16 +0200)]
drm/bridge: Replace HTTP links with HTTPS ones

Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
  If not .svg:
    For each line:
      If doesn't contain `\bxmlns\b`:
        For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
  If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
            If both the HTTP and HTTPS versions
            return 200 OK and serve the same content:
              Replace HTTP with HTTPS.

Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200708121604.14292-1-grandmaster@al2klimov.de
4 years agodrm/bridge: dw-hdmi: Always add the bridge in the global bridge list
Liu Ying [Thu, 9 Jul 2020 02:02:36 +0000 (10:02 +0800)]
drm/bridge: dw-hdmi: Always add the bridge in the global bridge list

It doesn't hurt to add the bridge in the global bridge list also for
platform specific dw-hdmi drivers which are based on the component
framework.  This can be achieved by moving the drm_bridge_add() function
call from dw_hdmi_probe() to __dw_hdmi_probe().  A counterpart movement
for drm_bridge_remove() is also needed then.  Moreover, since drm_bridge_add()
initializes &bridge->hpd_mutex, this may help those platform specific
dw-hdmi drivers(based on the component framework) avoid accessing the
uninitialized mutex in drm_bridge_hpd_notify() which is called in
dw_hdmi_irq().  Putting drm_bridge_add() in __dw_hdmi_probe() just before
it returns successfully should bring no logic change for platforms based
on the DRM bridge API, which is a good choice from safety point of view.
Also, __dw_hdmi_probe() is renamed to dw_hdmi_probe() since dw_hdmi_probe()
does nothing else but calling __dw_hdmi_probe().  Similar renaming applies
to the __dw_hdmi_remove()/dw_hdmi_remove() pair.

Fixes: ec971aaa6775 ("drm: bridge: dw-hdmi: Make connector creation optional")
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Cheng-Yi Chiang <cychiang@chromium.org>
Cc: Dariusz Marcinkiewicz <darekm@google.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Jose Abreu <joabreu@synopsys.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: dri-devel@lists.freedesktop.org
Cc: NXP Linux Team <linux-imx@nxp.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1594260156-8316-2-git-send-email-victor.liu@nxp.com
4 years agodrm/bridge: dw-hdmi: Don't cleanup i2c adapter and ddc ptr in __dw_hdmi_probe() bailo...
Liu Ying [Thu, 9 Jul 2020 02:02:35 +0000 (10:02 +0800)]
drm/bridge: dw-hdmi: Don't cleanup i2c adapter and ddc ptr in __dw_hdmi_probe() bailout path

It's unnecessary to cleanup the i2c adapter and the ddc pointer in
the bailout path of  __dw_hdmi_probe(), since the adapter is not
added and the ddc pointer is not set.

Fixes: a23d6265f033 ("drm: bridge: dw-hdmi: Extract PHY interrupt setup to a function")
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Cheng-Yi Chiang <cychiang@chromium.org>
Cc: Dariusz Marcinkiewicz <darekm@google.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Jose Abreu <joabreu@synopsys.com>
Cc: dri-devel@lists.freedesktop.org
Cc: NXP Linux Team <linux-imx@nxp.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1594260156-8316-1-git-send-email-victor.liu@nxp.com
4 years agodrm/panel: Replace HTTP links with HTTPS ones
Alexander A. Klimov [Thu, 9 Jul 2020 18:47:55 +0000 (20:47 +0200)]
drm/panel: Replace HTTP links with HTTPS ones

Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
  If not .svg:
    For each line:
      If doesn't contain `\bxmlns\b`:
        For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
  If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
            If both the HTTP and HTTPS versions
            return 200 OK and serve the same content:
              Replace HTTP with HTTPS.

Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200709184755.24798-1-grandmaster@al2klimov.de
4 years agofbdev: sm712fb: set error code in probe
Evgeny Novikov [Mon, 6 Jul 2020 15:53:28 +0000 (18:53 +0300)]
fbdev: sm712fb: set error code in probe

If smtcfb_pci_probe() does not detect a valid chip it cleans up
everything and returns 0. This can result in various bad things later.
The patch sets the error code on the corresponding path.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Teddy Wang <teddy.wang@siliconmotion.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200706155328.8396-1-novikov@ispras.ru
4 years agofbdev: da8xx-fb: go to proper label on error handling paths in probe
Evgeny Novikov [Thu, 2 Jul 2020 16:05:40 +0000 (19:05 +0300)]
fbdev: da8xx-fb: go to proper label on error handling paths in probe

fb_probe() can successfully allocate a new frame buffer, but then fail
to perform some operations with regulator. In these cases fb_probe()
goes to label err_pm_runtime_disable where the frame buffer is not
released. The patch makes fb_probe() to go to label err_release_fb on
corresponding error handling paths.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702160540.24546-1-novikov@ispras.ru
4 years agovideo: fbdev: vt8623fb: Constify static vga_regsets
Rikard Falkeborn [Wed, 1 Jul 2020 21:02:48 +0000 (23:02 +0200)]
video: fbdev: vt8623fb: Constify static vga_regsets

These are not modified so make them const to allow the compiler to put
them in read-only memory.

Before:
   text    data     bss     dec     hex filename
  25509    7928      64   33501    82dd drivers/video/fbdev/vt8623fb.o

After:
   text    data     bss     dec     hex filename
  26533    6904      64   33501    82dd drivers/video/fbdev/vt8623fb.o

Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701210248.64893-1-rikard.falkeborn@gmail.com
4 years agoomapfb: dss: Fix max fclk divider for omap36xx
Adam Ford [Tue, 30 Jun 2020 18:26:36 +0000 (13:26 -0500)]
omapfb: dss: Fix max fclk divider for omap36xx

The drm/omap driver was fixed to correct an issue where using a
divider of 32 breaks the DSS despite the TRM stating 32 is a valid
number.  Through experimentation, it appears that 31 works, and
it is consistent with the value used by the drm/omap driver.

This patch fixes the divider for fbdev driver instead of the drm.

Fixes: f76ee892a99e ("omapfb: copy omapdss & displays for omapfb")
Cc: <stable@vger.kernel.org> #4.5+
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
[b.zolnierkie: mark patch as applicable to stable 4.5+ (was 4.9+)]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200630182636.439015-1-aford173@gmail.com