git.monstr.eu Git - linux-2.6-microblaze.git/log

io_uring: use cond_resched() in io_ring_ctx_wait_and_kill()

While working on to make io_uring sqpoll mode support syscalls that need
struct files_struct, I got cpu soft lockup in io_ring_ctx_wait_and_kill(),

while (ctx->sqo_thread && !wq_has_sleeper(&ctx->sqo_wait))
cpu_relax();

above loop never has an chance to exit, it's because preempt isn't enabled
in the kernel, and the context calling io_ring_ctx_wait_and_kill() and
io_sq_thread() run in the same cpu, if io_sq_thread calls a cond_resched()
yield cpu and another context enters above loop, then io_sq_thread() will
always in runqueue and never exit.

Use cond_resched() can fix this issue.

Reported-by: syzbot+66243bb7126c410cefe6@syzkaller.appspotmail.com
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_uring: use proper references for fallback_req locking

Use ctx->fallback_req address for test_and_set_bit_lock() and
clear_bit_unlock().

Signed-off-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_uring: only force async punt if poll based retry can't handle it

We do blocking retry from our poll handler, if the file supports polled
notifications. Only mark the request as needing an async worker if we
can't poll for it.

Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_uring: enable poll retry for any file with ->read_iter / ->write_iter

We can have files like eventfd where it's perfectly fine to do poll
based retry on them, right now io_file_supports_async() doesn't take
that into account.

Pass in data direction and check the f_op instead of just always needing
an async worker.

Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_uring: statx must grab the file table for valid fd

Clay reports that OP_STATX fails for a test case with a valid fd
and empty path:

-- Test 0: statx:fd 3: SUCCEED, file mode 100755
-- Test 1: statx:path ./uring_statx: SUCCEED, file mode 100755
-- Test 2: io_uring_statx:fd 3: FAIL, errno 9: Bad file descriptor
-- Test 3: io_uring_statx:path ./uring_statx: SUCCEED, file mode 100755

This is due to statx not grabbing the process file table, hence we can't
lookup the fd in async context. If the fd is valid, ensure that we grab
the file table so we can grab the file from async context.

Cc: stable@vger.kernel.org # v5.6
Reported-by: Clay Harris <bugs@claycon.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_uring: only restore req->work for req that needs do completion

When testing io_uring IORING_FEAT_FAST_POLL feature, I got below panic:
BUG: kernel NULL pointer dereference, address: 0000000000000030
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 5 PID: 2154 Comm: io_uring_echo_s Not tainted 5.6.0+ #359
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS rel-1.11.1-0-g0551a4be2c-prebuilt.qemu-project.org 04/01/2014
RIP: 0010:io_wq_submit_work+0xf/0xa0
Code: ff ff ff be 02 00 00 00 e8 ae c9 19 00 e9 58 ff ff ff 66 0f 1f
84 00 00 00 00 00 0f 1f 44 00 00 41 54 49 89 fc 55 53 48 8b 2f <8b>
45 30 48 8d 9d 48 ff ff ff 25 01 01 00 00 83 f8 01 75 07 eb 2a
RSP: 0018:ffffbef543e93d58 EFLAGS: 00010286
RAX: ffffffff84364f50 RBX: ffffa3eb50f046b8 RCX: 0000000000000000
RDX: ffffa3eb0efc1840 RSI: 0000000000000006 RDI: ffffa3eb50f046b8
RBP: 0000000000000000 R08: 00000000fffd070d R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffffa3eb50f046b8
R13: ffffa3eb0efc2088 R14: ffffffff85b69be0 R15: ffffa3eb0effa4b8
FS:  00007fe9f69cc4c0(0000) GS:ffffa3eb5ef40000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000030 CR3: 0000000020410000 CR4: 00000000000006e0
Call Trace:
task_work_run+0x6d/0xa0
do_exit+0x39a/0xb80
? get_signal+0xfe/0xbc0
do_group_exit+0x47/0xb0
get_signal+0x14b/0xbc0
? __x64_sys_io_uring_enter+0x1b7/0x450
do_signal+0x2c/0x260
? __x64_sys_io_uring_enter+0x228/0x450
exit_to_usermode_loop+0x87/0xf0
do_syscall_64+0x209/0x230
entry_SYSCALL_64_after_hwframe+0x49/0xb3
RIP: 0033:0x7fe9f64f8df9
Code: Bad RIP value.

task_work_run calls io_wq_submit_work unexpectedly, it's obvious that
struct callback_head's func member has been changed. After looking into
codes, I found this issue is still due to the union definition:
    union {
        /*
         * Only commands that never go async can use the below fields,
         * obviously. Right now only IORING_OP_POLL_ADD uses them, and
         * async armed poll handlers for regular commands. The latter
         * restore the work, if needed.
         */
        struct {
            struct callback_head task_work;
            struct hlist_node hash_node;
            struct async_poll *apoll;
        };
        struct io_wq_work work;
    };

When task_work_run has multiple work to execute, the work that calls
io_poll_remove_all() will do req->work restore for  non-poll request
always, but indeed if a non-poll request has been added to a new
callback_head, subsequent callback will call io_async_task_func() to
handle this request, that means we should not do the restore work
for such non-poll request. Meanwhile in io_async_task_func(), we should
drop submit ref when req has been canceled.

Fix both issues.

Fixes: b1f573bd15fd ("io_uring: restore req->work when canceling poll request")
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Use io_double_put_req()

Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_uring: don't count rqs failed after current one

When checking for draining with __req_need_defer(), it tries to match
how many requests were sent before a current one with number of already
completed. Dropped SQEs are included in req->sequence, and they won't
ever appear in CQ. To compensate for that, __req_need_defer() substracts
ctx->cached_sq_dropped.
However, what it should really use is number of SQEs dropped __before__
the current one. In other words, any submitted request shouldn't
shouldn't affect dequeueing from the drain queue of previously submitted
ones.

Instead of saving proper ctx->cached_sq_dropped in each request,
substract from req->sequence it at initialisation, so it includes number
of properly submitted requests.

note: it also changes behaviour of timeouts, but
1. it's already diverge from the description because of using SQ
2. the description is ambiguous regarding dropped SQEs

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_uring: kill already cached timeout.seq_offset

req->timeout.count and req->io->timeout.seq_offset store the same value,
which is sqe->off. Kill the second one

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_uring: fix cached_sq_head in io_timeout()

io_timeout() can be executed asynchronously by a worker and without
holding ctx->uring_lock

1. using ctx->cached_sq_head there is racy there
2. it should count events from a moment of timeout's submission, but
not execution

Use req->sequence.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_uring: only post events in io_poll_remove_all() if we completed some

syzbot reports this crash:

BUG: unable to handle page fault for address: ffffffffffffffe8
PGD f96e17067 P4D f96e17067 PUD f96e19067 PMD 0
Oops: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
CPU: 55 PID: 211750 Comm: trinity-c127 Tainted: G    B        L    5.7.0-rc1-next-20200413 #4
Hardware name: HP ProLiant DL380 Gen9/ProLiant DL380 Gen9, BIOS P89 04/12/2017
RIP: 0010:__wake_up_common+0x98/0x290
el/sched/wait.c:87
Code: 40 4d 8d 78 e8 49 8d 7f 18 49 39 fd 0f 84 80 00 00 00 e8 6b bd 2b 00 49 8b 5f 18 45 31 e4 48 83 eb 18 4c 89 ff e8 08 bc 2b 00 <45> 8b 37 41 f6 c6 04 75 71 49 8d 7f 10 e8 46 bd 2b 00 49 8b 47 10
RSP: 0018:ffffc9000adbfaf0 EFLAGS: 00010046
RAX: 0000000000000000 RBX: ffffffffffffffe8 RCX: ffffffffaa9636b8
RDX: 0000000000000003 RSI: dffffc0000000000 RDI: ffffffffffffffe8
RBP: ffffc9000adbfb40 R08: fffffbfff582c5fd R09: fffffbfff582c5fd
R10: ffffffffac162fe3 R11: fffffbfff582c5fc R12: 0000000000000000
R13: ffff888ef82b0960 R14: ffffc9000adbfb80 R15: ffffffffffffffe8
FS:  00007fdcba4c4740(0000) GS:ffff889033780000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffffffffe8 CR3: 0000000f776a0004 CR4: 00000000001606e0
Call Trace:
__wake_up_common_lock+0xea/0x150
ommon_lock at kernel/sched/wait.c:124
? __wake_up_common+0x290/0x290
? lockdep_hardirqs_on+0x16/0x2c0
__wake_up+0x13/0x20
io_cqring_ev_posted+0x75/0xe0
v_posted at fs/io_uring.c:1160
io_ring_ctx_wait_and_kill+0x1c0/0x2f0
l at fs/io_uring.c:7305
io_uring_create+0xa8d/0x13b0
? io_req_defer_prep+0x990/0x990
? __kasan_check_write+0x14/0x20
io_uring_setup+0xb8/0x130
? io_uring_create+0x13b0/0x13b0
? check_flags.part.28+0x220/0x220
? lockdep_hardirqs_on+0x16/0x2c0
__x64_sys_io_uring_setup+0x31/0x40
do_syscall_64+0xcc/0xaf0
? syscall_return_slowpath+0x580/0x580
? lockdep_hardirqs_off+0x1f/0x140
? entry_SYSCALL_64_after_hwframe+0x3e/0xb3
? trace_hardirqs_off_caller+0x3a/0x150
? trace_hardirqs_off_thunk+0x1a/0x1c
entry_SYSCALL_64_after_hwframe+0x49/0xb3
RIP: 0033:0x7fdcb9dd76ed
Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 6b 57 2c 00 f7 d8 64 89 01 48
RSP: 002b:00007ffe7fd4e4f8 EFLAGS: 00000246 ORIG_RAX: 00000000000001a9
RAX: ffffffffffffffda RBX: 00000000000001a9 RCX: 00007fdcb9dd76ed
RDX: fffffffffffffffc RSI: 0000000000000000 RDI: 0000000000005d54
RBP: 00000000000001a9 R08: 0000000e31d3caa7 R09: 0082400004004000
R10: ffffffffffffffff R11: 0000000000000246 R12: 0000000000000002
R13: 00007fdcb842e058 R14: 00007fdcba4c46c0 R15: 00007fdcb842e000
Modules linked in: bridge stp llc nfnetlink cn brd vfat fat ext4 crc16 mbcache jbd2 loop kvm_intel kvm irqbypass intel_cstate intel_uncore dax_pmem intel_rapl_perf dax_pmem_core ip_tables x_tables xfs sd_mod tg3 firmware_class libphy hpsa scsi_transport_sas dm_mirror dm_region_hash dm_log dm_mod [last unloaded: binfmt_misc]
CR2: ffffffffffffffe8
---[ end trace f9502383d57e0e22 ]---
RIP: 0010:__wake_up_common+0x98/0x290
Code: 40 4d 8d 78 e8 49 8d 7f 18 49 39 fd 0f 84 80 00 00 00 e8 6b bd 2b 00 49 8b 5f 18 45 31 e4 48 83 eb 18 4c 89 ff e8 08 bc 2b 00 <45> 8b 37 41 f6 c6 04 75 71 49 8d 7f 10 e8 46 bd 2b 00 49 8b 47 10
RSP: 0018:ffffc9000adbfaf0 EFLAGS: 00010046
RAX: 0000000000000000 RBX: ffffffffffffffe8 RCX: ffffffffaa9636b8
RDX: 0000000000000003 RSI: dffffc0000000000 RDI: ffffffffffffffe8
RBP: ffffc9000adbfb40 R08: fffffbfff582c5fd R09: fffffbfff582c5fd
R10: ffffffffac162fe3 R11: fffffbfff582c5fc R12: 0000000000000000
R13: ffff888ef82b0960 R14: ffffc9000adbfb80 R15: ffffffffffffffe8
FS:  00007fdcba4c4740(0000) GS:ffff889033780000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffffffffe8 CR3: 0000000f776a0004 CR4: 00000000001606e0
Kernel panic - not syncing: Fatal exception
Kernel Offset: 0x29800000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
---[ end Kernel panic - not syncing: Fatal exception ]—

which is due to error injection (or allocation failure) preventing the
rings from being setup. On shutdown, we attempt to remove any pending
requests, and for poll request, we call io_cqring_ev_posted() when we've
killed poll requests. However, since the rings aren't setup, we won't
find any poll requests. Make the calling of io_cqring_ev_posted()
dependent on actually having completed requests. This fixes this setup
corner case, and removes spurious calls if we remove poll requests and
don't find any.

Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_uring: io_async_task_func() should check and honor cancelation

If the request has been marked as canceled, don't try and issue it.
Instead just fill a canceled event and finish the request.

Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_uring: check for need to re-wait in polled async handling

We added this for just the regular poll requests in commit a6ba632d2c24
("io_uring: retry poll if we got woken with non-matching mask"), we
should do the same for the poll handler used pollable async requests.
Move the re-wait check and arm into a helper, and call it from
io_async_task_func() as well.

Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_uring: correct O_NONBLOCK check for splice punt

The splice file punt check uses file->f_mode to check for O_NONBLOCK,
but it should be checking file->f_flags. This leads to punting even
for files that have O_NONBLOCK set, which isn't necessary. This equates
to checking for FMODE_PATH, which will never be set on the fd in
question.

Fixes: 7d67af2c0134 ("io_uring: add splice(2) support")
Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_uring: restore req->work when canceling poll request

When running liburing test case 'accept', I got below warning:
RED: Invalid credentials
RED: At include/linux/cred.h:285
RED: Specified credentials: 00000000d02474a0
RED: ->magic=4b, put_addr=000000005b4f46e9
RED: ->usage=-1699227648, subscr=-25693
RED: ->*uid = { 256,-25693,-25693,65534 }
RED: ->*gid = { 0,-1925859360,-1789740800,-1827028688 }
RED: ->security is 00000000258c136e
eneral protection fault, probably for non-canonical address 0xdead4ead00000000: 0000 [#1] SMP PTI
PU: 21 PID: 2037 Comm: accept Not tainted 5.6.0+ #318
ardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS rel-1.11.1-0-g0551a4be2c-prebuilt.qemu-project.org 04/01/2014
IP: 0010:dump_invalid_creds+0x16f/0x184
ode: 48 8b 83 88 00 00 00 48 3d ff 0f 00 00 76 29 48 89 c2 81 e2 00 ff ff ff 48
81 fa 00 6b 6b 6b 74 17 5b 48 c7 c7 4b b1 10 8e 5d <8b> 50 04 41 5c 8b 30 41 5d
e9 67 e3 04 00 5b 5d 41 5c 41 5d c3 0f
SP: 0018:ffffacc1039dfb38 EFLAGS: 00010087
AX: dead4ead00000000 RBX: ffff9ba39319c100 RCX: 0000000000000007
DX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff8e10b14b
BP: ffffffff8e108476 R08: 0000000000000000 R09: 0000000000000001
10: 0000000000000000 R11: ffffacc1039df9e5 R12: 000000009552b900
13: 000000009319c130 R14: ffff9ba39319c100 R15: 0000000000000246
S: 00007f96b2bfc4c0(0000) GS:ffff9ba39f340000(0000) knlGS:0000000000000000
S: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
R2: 0000000000401870 CR3: 00000007db7a4000 CR4: 00000000000006e0
all Trace:
__invalid_creds+0x48/0x4a
__io_req_aux_free+0x2e8/0x3b0
? io_poll_remove_one+0x2a/0x1d0
__io_free_req+0x18/0x200
io_free_req+0x31/0x350
io_poll_remove_one+0x17f/0x1d0
io_poll_cancel.isra.80+0x6c/0x80
io_async_find_and_cancel+0x111/0x120
io_issue_sqe+0x181/0x10e0
? __lock_acquire+0x552/0xae0
? lock_acquire+0x8e/0x310
? fs_reclaim_acquire.part.97+0x5/0x30
__io_queue_sqe.part.100+0xc4/0x580
? io_submit_sqes+0x751/0xbd0
? rcu_read_lock_sched_held+0x32/0x40
io_submit_sqes+0x9ba/0xbd0
? __x64_sys_io_uring_enter+0x2b2/0x460
? __x64_sys_io_uring_enter+0xaf/0x460
? find_held_lock+0x2d/0x90
? __x64_sys_io_uring_enter+0x111/0x460
__x64_sys_io_uring_enter+0x2d7/0x460
do_syscall_64+0x5a/0x230
entry_SYSCALL_64_after_hwframe+0x49/0xb3

After looking into codes, it turns out that this issue is because we didn't
restore the req->work, which is changed in io_arm_poll_handler(), req->work
is a union with below struct:
struct {
struct callback_head task_work;
struct hlist_node hash_node;
struct async_poll *apoll;
};
If we forget to restore, members in struct io_wq_work would be invalid,
restore the req->work to fix this issue.

Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Get rid of not needed 'need_restore' variable.

Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_uring: move all request init code in one place

Requests initialisation is scattered across several functions, namely
io_init_req(), io_submit_sqes(), io_submit_sqe(). Put it
in io_init_req() for better data locality and code clarity.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_uring: keep all sqe->flags in req->flags

It's a good idea to not read sqe->flags twice, as it's prone to security
bugs. Instead of passing it around, embeed them in req->flags. It's
already so except for IOSQE_IO_LINK.
1. rename former REQ_F_LINK -> REQ_F_LINK_HEAD
2. introduce and copy REQ_F_LINK, which mimics IO_IOSQE_LINK

And leave req_set_fail_links() using new REQ_F_LINK, because it's more
sensible.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_uring: early submission req fail code

Having only one place for cleaning up a request after a link assembly/
submission failure will play handy in the future. At least it allows
to remove duplicated cleanup sequence.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_uring: track mm through current->mm

As a preparation for extracting request init bits, remove self-coded mm
tracking from io_submit_sqes(), but rely on current->mm. It's more
convenient, than passing this piece of state in other functions.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_uring: remove obsolete @mm_fault

If io_submit_sqes() can't grab an mm, it fails and exits right away.
There is no need to track the fact of the failure. Remove @mm_fault.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge branch 'akpm' (patches from Andrew)

Merge yet more updates from Andrew Morton:

- Almost all of the rest of MM (memcg, slab-generic, slab, pagealloc,
   gup, hugetlb, pagemap, memremap)

- Various other things (hfs, ocfs2, kmod, misc, seqfile)

* akpm: (34 commits)
  ipc/util.c: sysvipc_find_ipc() should increase position index
  kernel/gcov/fs.c: gcov_seq_next() should increase position index
  fs/seq_file.c: seq_read(): add info message about buggy .next functions
  drivers/dma/tegra20-apb-dma.c: fix platform_get_irq.cocci warnings
  change email address for Pali Rohár
  selftests: kmod: test disabling module autoloading
  selftests: kmod: fix handling test numbers above 9
  docs: admin-guide: document the kernel.modprobe sysctl
  fs/filesystems.c: downgrade user-reachable WARN_ONCE() to pr_warn_once()
  kmod: make request_module() return an error when autoloading is disabled
  mm/memremap: set caching mode for PCI P2PDMA memory to WC
  mm/memory_hotplug: add pgprot_t to mhp_params
  powerpc/mm: thread pgprot_t through create_section_mapping()
  x86/mm: introduce __set_memory_prot()
  x86/mm: thread pgprot_t through init_memory_mapping()
  mm/memory_hotplug: rename mhp_restrictions to mhp_params
  mm/memory_hotplug: drop the flags field from struct mhp_restrictions
  mm/special: create generic fallbacks for pte_special() and pte_mkspecial()
  mm/vma: introduce VM_ACCESS_FLAGS
  mm/vma: define a default value for VM_DATA_DEFAULT_FLAGS
  ...

Merge tag 'docs-5.7-2' of git://git.lwn.net/linux

Pull Documentation fixes from Jonathan Corbet:
"A handful of late-arriving fixes for the documentation tree"

* tag 'docs-5.7-2' of git://git.lwn.net/linux:
  Documentation: android: binderfs: add 'stats' mount option
  Documentation: driver-api/usb/writing_usb_driver.rst Updates documentation links
  docs: driver-api: address duplicate label warning
  Documentation: sysrq: fix RST formatting
  docs: kernel-parameters.txt: Fix broken references
  docs: kernel-parameters.txt: Remove nompx
  docs: filesystems: fix typo in qnx6.rst

Merge tag 'for-linus-5.7-ofs1' of git://git./linux/kernel/git/hubcap/linux

Pull orangefs updates from Mike Marshall:
"A fix and two cleanups.

  Fix:

   - Christoph Hellwig noticed that some logic I added to
     orangefs_file_read_iter introduced a race condition, so he sent a
     reversion patch. I had to modify his patch since reverting at this
     point broke Orangefs.

  Cleanups:

   - Christoph Hellwig noticed that we were doing some unnecessary work
     in orangefs_flush, so he sent in a patch that removed the un-needed
     code.

   - Al Viro told me he had trouble building Orangefs. Orangefs should
     be easy to build, even for Al :-).

     I looked back at the test server build notes in orangefs.txt, just
     in case that's where the trouble really is, and found a couple of
     typos and made a couple of clarifications"

* tag 'for-linus-5.7-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
  orangefs: clarify build steps for test server in orangefs.txt
  orangefs: don't mess with I_DIRTY_TIMES in orangefs_flush
  orangefs: get rid of knob code...

Merge tag 'xtensa-20200410' of git://github.com/jcmvbkbc/linux-xtensa

Pull xtensa updates from Max Filippov:

- replace setup_irq() by request_irq()

- cosmetic fixes in xtensa Kconfig and boot/Makefile

* tag 'xtensa-20200410' of git://github.com/jcmvbkbc/linux-xtensa:
  arch/xtensa: fix grammar in Kconfig help text
  xtensa: remove meaningless export ccflags-y
  xtensa: replace setup_irq() by request_irq()

Merge tag 'for-linus-5.7-rc1b-tag' of git://git./linux/kernel/git/xen/tip

Pull more xen updates from Juergen Gross:

- two cleanups

- fix a boot regression introduced in this merge window

- fix wrong use of memory allocation flags

* tag 'for-linus-5.7-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  x86/xen: fix booting 32-bit pv guest
  x86/xen: make xen_pvmmu_arch_setup() static
  xen/blkfront: fix memory allocation flags in blkfront_setup_indirect()
  xen: Use evtchn_type_t as a type for event channels

ipc/util.c: sysvipc_find_ipc() should increase position index

If seq_file .next function does not change position index, read after
some lseek can generate unexpected output.

https://bugzilla.kernel.org/show_bug.cgi?id=206283
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Waiman Long <longman@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: NeilBrown <neilb@suse.com>
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/b7a20945-e315-8bb0-21e6-3875c14a8494@virtuozzo.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel/gcov/fs.c: gcov_seq_next() should increase position index

If seq_file .next function does not change position index, read after
some lseek can generate unexpected output.

https://bugzilla.kernel.org/show_bug.cgi?id=206283
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: NeilBrown <neilb@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Waiman Long <longman@redhat.com>
Link: http://lkml.kernel.org/r/f65c6ee7-bd00-f910-2f8a-37cc67e4ff88@virtuozzo.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/seq_file.c: seq_read(): add info message about buggy .next functions

Patch series "seq_file .next functions should increase position index".

In Aug 2018 NeilBrown noticed commit 1f4aace60b0e ("fs/seq_file.c:
simplify seq_file iteration code and interface")

"Some ->next functions do not increment *pos when they return NULL...
Note that such ->next functions are buggy and should be fixed.  A simple
demonstration is dd if=/proc/swaps bs=1000 skip=1 Choose any block size
larger than the size of /proc/swaps.  This will always show the whole
last line of /proc/swaps"

Described problem is still actual.  If you make lseek into middle of
last output line following read will output end of last line and whole
last line once again.

  $ dd if=/proc/swaps bs=1  # usual output
  Filename Type Size Used Priority
  /dev/dm-0                             partition 4194812 97536 -2
  104+0 records in
  104+0 records out
  104 bytes copied

  $ dd if=/proc/swaps bs=40 skip=1    # last line was generated twice
  dd: /proc/swaps: cannot skip to specified offset
  v/dm-0                                partition 4194812 97536 -2
  /dev/dm-0                             partition 4194812 97536 -2
  3+1 records in
  3+1 records out
  131 bytes copied

There are lot of other affected files, I've found 30+ including
/proc/net/ip_tables_matches and /proc/sysvipc/*

I've sent patches into maillists of affected subsystems already, this
patch-set fixes the problem in files related to pstore, tracing, gcov,
sysvipc and other subsystems processed via linux-kernel@ mailing list
directly

https://bugzilla.kernel.org/show_bug.cgi?id=206283

This patch (of 4):

Add debug code to seq_read() to detect missed or out-of-tree incorrect
.next seq_file functions.

[akpm@linux-foundation.org: s/pr_info/pr_info_ratelimited/, per Qian Cai]
https://bugzilla.kernel.org/show_bug.cgi?id=206283
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: NeilBrown <neilb@suse.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: Waiman Long <longman@redhat.com>
Link: http://lkml.kernel.org/r/244674e5-760c-86bd-d08a-047042881748@virtuozzo.com
Link: http://lkml.kernel.org/r/7c24087c-e280-e580-5b0c-0cdaeb14cd18@virtuozzo.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/dma/tegra20-apb-dma.c: fix platform_get_irq.cocci warnings

Remove dev_err() messages after platform_get_irq*() failures.
platform_get_irq() already prints an error.

Generated by: scripts/coccinelle/api/platform_get_irq.cocci

Fixes: 6c41ac96ad92 ("dmaengine: tegra-apb: Support COMPILE_TEST")
Signed-off-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Cc: Laxman Dewangan <ldewangan@nvidia.com>
Cc: Vinod Koul <vinod.koul@linux.intel.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Jon Hunter <jonathanh@nvidia.com>
Link: http://lkml.kernel.org/r/alpine.DEB.2.21.2002271133450.2973@hadrien
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

change email address for Pali Rohár

For security reasons I stopped using gmail account and kernel address is
now up-to-date alias to my personal address.

People periodically send me emails to address which they found in source
code of drivers, so this change reflects state where people can contact
me.

[ Added .mailmap entry as per Joe Perches - Linus ]
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Joe Perches <joe@perches.com>
Link: http://lkml.kernel.org/r/20200307104237.8199-1-pali@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

selftests: kmod: test disabling module autoloading

Test that request_module() fails with -ENOENT when
/proc/sys/kernel/modprobe contains (a) a nonexistent path, and (b) an
empty path.

Case (b) is a regression test for the patch "kmod: make request_module()
return an error when autoloading is disabled".

Tested with 'kmod.sh -t 0010 && kmod.sh -t 0011', and also simply with
'kmod.sh' to run all kmod tests.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: NeilBrown <neilb@suse.com>
Link: http://lkml.kernel.org/r/20200312202552.241885-5-ebiggers@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

selftests: kmod: fix handling test numbers above 9

get_test_count() and get_test_enabled() were broken for test numbers
above 9 due to awk interpreting a field specification like '$0010' as
octal rather than decimal. Fix it by stripping the leading zeroes.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: NeilBrown <neilb@suse.com>
Link: http://lkml.kernel.org/r/20200318230515.171692-5-ebiggers@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

docs: admin-guide: document the kernel.modprobe sysctl

Document the kernel.modprobe sysctl in the same place that all the other
kernel.* sysctls are documented. Make sure to mention how to use this
sysctl to completely disable module autoloading, and how this sysctl
relates to CONFIG_STATIC_USERMODEHELPER.

[ebiggers@google.com: v5]
Link: http://lkml.kernel.org/r/20200318230515.171692-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: NeilBrown <neilb@suse.com>
Link: http://lkml.kernel.org/r/20200312202552.241885-4-ebiggers@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/filesystems.c: downgrade user-reachable WARN_ONCE() to pr_warn_once()

After request_module(), nothing is stopping the module from being
unloaded until someone takes a reference to it via try_get_module().

The WARN_ONCE() in get_fs_type() is thus user-reachable, via userspace
running 'rmmod' concurrently.

Since WARN_ONCE() is for kernel bugs only, not for user-reachable
situations, downgrade this warning to pr_warn_once().

Keep it printed once only, since the intent of this warning is to detect
a bug in modprobe at boot time. Printing the warning more than once
wouldn't really provide any useful extra information.

Fixes: 41124db869b7 ("fs: warn in case userspace lied about modprobe return")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jessica Yu <jeyu@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: NeilBrown <neilb@suse.com>
Cc: <stable@vger.kernel.org> [4.13+]
Link: http://lkml.kernel.org/r/20200312202552.241885-3-ebiggers@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kmod: make request_module() return an error when autoloading is disabled

Patch series "module autoloading fixes and cleanups", v5.

This series fixes a bug where request_module() was reporting success to
kernel code when module autoloading had been completely disabled via
'echo > /proc/sys/kernel/modprobe'.

It also addresses the issues raised on the original thread
(https://lkml.kernel.org/lkml/20200310223731.126894-1-ebiggers@kernel.org/T/#u)
bydocumenting the modprobe sysctl, adding a self-test for the empty path
case, and downgrading a user-reachable WARN_ONCE().

This patch (of 4):

It's long been possible to disable kernel module autoloading completely
(while still allowing manual module insertion) by setting
/proc/sys/kernel/modprobe to the empty string.

This can be preferable to setting it to a nonexistent file since it
avoids the overhead of an attempted execve(), avoids potential
deadlocks, and avoids the call to security_kernel_module_request() and
thus on SELinux-based systems eliminates the need to write SELinux rules
to dontaudit module_request.

However, when module autoloading is disabled in this way,
request_module() returns 0. This is broken because callers expect 0 to
mean that the module was successfully loaded.

Apparently this was never noticed because this method of disabling
module autoloading isn't used much, and also most callers don't use the
return value of request_module() since it's always necessary to check
whether the module registered its functionality or not anyway.

But improperly returning 0 can indeed confuse a few callers, for example
get_fs_type() in fs/filesystems.c where it causes a WARNING to be hit:

if (!fs && (request_module("fs-%.*s", len, name) == 0)) {
fs = __get_fs_type(name, len);
WARN_ONCE(!fs, "request_module fs-%.*s succeeded, but still no fs?\n", len, name);
}

This is easily reproduced with:

echo > /proc/sys/kernel/modprobe
mount -t NONEXISTENT none /

It causes:

request_module fs-NONEXISTENT succeeded, but still no fs?
WARNING: CPU: 1 PID: 1106 at fs/filesystems.c:275 get_fs_type+0xd6/0xf0
[...]

This should actually use pr_warn_once() rather than WARN_ONCE(), since
it's also user-reachable if userspace immediately unloads the module.
Regardless, request_module() should correctly return an error when it
fails. So let's make it return -ENOENT, which matches the error when
the modprobe binary doesn't exist.

I've also sent patches to document and test this case.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Jessica Yu <jeyu@kernel.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Ben Hutchings <benh@debian.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200310223731.126894-1-ebiggers@kernel.org
Link: http://lkml.kernel.org/r/20200312202552.241885-1-ebiggers@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memremap: set caching mode for PCI P2PDMA memory to WC

PCI BAR IO memory should never be mapped as WB, however prior to this
the PAT bits were set WB and it was typically overridden by MTRR
registers set by the firmware.

Set PCI P2PDMA memory to be UC as this is what it currently, typically,
ends up being mapped as on x86 after the MTRR registers override the
cache setting.

Future use-cases may need to generalize this by adding flags to select
the caching type, as some P2PDMA cases may not want UC. However, those
use-cases are not upstream yet and this can be changed when they arrive.

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Eric Badger <ebadger@gigaio.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/20200306170846.9333-8-logang@deltatee.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memory_hotplug: add pgprot_t to mhp_params

devm_memremap_pages() is currently used by the PCI P2PDMA code to create
struct page mappings for IO memory.  At present, these mappings are
created with PAGE_KERNEL which implies setting the PAT bits to be WB.
However, on x86, an mtrr register will typically override this and force
the cache type to be UC-.  In the case firmware doesn't set this
register it is effectively WB and will typically result in a machine
check exception when it's accessed.

Other arches are not currently likely to function correctly seeing they
don't have any MTRR registers to fall back on.

To solve this, provide a way to specify the pgprot value explicitly to
arch_add_memory().

Of the arches that support MEMORY_HOTPLUG: x86_64, and arm64 need a
simple change to pass the pgprot_t down to their respective functions
which set up the page tables.  For x86_32, set the page tables
explicitly using _set_memory_prot() (seeing they are already mapped).

For ia64, s390 and sh, reject anything but PAGE_KERNEL settings -- this
should be fine, for now, seeing these architectures don't support
ZONE_DEVICE.

A check in __add_pages() is also added to ensure the pgprot parameter
was set for all arches.

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Eric Badger <ebadger@gigaio.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/20200306170846.9333-7-logang@deltatee.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

powerpc/mm: thread pgprot_t through create_section_mapping()

In prepartion to support a pgprot_t argument for arch_add_memory().

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Eric Badger <ebadger@gigaio.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/20200306170846.9333-6-logang@deltatee.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86/mm: introduce __set_memory_prot()

For use in the 32bit arch_add_memory() to set the pgprot type of the
memory to add.

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Eric Badger <ebadger@gigaio.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/20200306170846.9333-5-logang@deltatee.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86/mm: thread pgprot_t through init_memory_mapping()

In preparation to support a pgprot_t argument for arch_add_memory().

It's required to move the prototype of init_memory_mapping() seeing the
original location came before the definition of pgprot_t.

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Eric Badger <ebadger@gigaio.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/20200306170846.9333-4-logang@deltatee.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memory_hotplug: rename mhp_restrictions to mhp_params

The mhp_restrictions struct really doesn't specify anything resembling a
restriction anymore so rename it to be mhp_params as it is a list of
extended parameters.

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Eric Badger <ebadger@gigaio.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/20200306170846.9333-3-logang@deltatee.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memory_hotplug: drop the flags field from struct mhp_restrictions

Patch series "Allow setting caching mode in arch_add_memory() for
P2PDMA", v4.

Currently, the page tables created using memremap_pages() are always
created with the PAGE_KERNEL cacheing mode.  However, the P2PDMA code is
creating pages for PCI BAR memory which should never be accessed through
the cache and instead use either WC or UC.  This still works in most
cases, on x86, because the MTRR registers typically override the caching
settings in the page tables for all of the IO memory to be UC-.
However, this tends not to work so well on other arches or some rare x86
machines that have firmware which does not setup the MTRR registers in
this way.

Instead of this, this series proposes a change to arch_add_memory() to
take the pgprot required by the mapping which allows us to explicitly
set pagetable entries for P2PDMA memory to UC.

This changes is pretty routine for most of the arches: x86_64, arm64 and
powerpc simply need to thread the pgprot through to where the page
tables are setup.  x86_32 unfortunately sets up the page tables at boot
so must use _set_memory_prot() to change their caching mode.  ia64, s390
and sh don't appear to have an easy way to change the page tables so,
for now at least, we just return -EINVAL on such mappings and thus they
will not support P2PDMA memory until the work for this is done.  This
should be fine as they don't yet support ZONE_DEVICE.

This patch (of 7):

This variable is not used anywhere and should therefore be removed from
the structure.

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Eric Badger <ebadger@gigaio.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Link: http://lkml.kernel.org/r/20200306170846.9333-2-logang@deltatee.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/special: create generic fallbacks for pte_special() and pte_mkspecial()

Currently there are many platforms that dont enable ARCH_HAS_PTE_SPECIAL
but required to define quite similar fallback stubs for special page
table entry helpers such as pte_special() and pte_mkspecial(), as they
get build in generic MM without a config check. This creates two
generic fallback stub definitions for these helpers, eliminating much
code duplication.

mips platform has a special case where pte_special() and pte_mkspecial()
visibility is wider than what ARCH_HAS_PTE_SPECIAL enablement requires.
This restricts those symbol visibility in order to avoid redefinitions
which is now exposed through this new generic stubs and subsequent build
failure. arm platform set_pte_at() definition needs to be moved into a
C file just to prevent a build failure.

[anshuman.khandual@arm.com: use defined(CONFIG_ARCH_HAS_PTE_SPECIAL) in mips per Thomas]
Link: http://lkml.kernel.org/r/1583851924-21603-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Guo Ren <guoren@kernel.org> [csky]
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Acked-by: Stafford Horne <shorne@gmail.com> [openrisc]
Acked-by: Helge Deller <deller@gmx.de> [parisc]
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Sam Creasey <sammy@sammy.net>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Link: http://lkml.kernel.org/r/1583802551-15406-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/vma: introduce VM_ACCESS_FLAGS

There are many places where all basic VMA access flags (read, write,
exec) are initialized or checked against as a group. One such example
is during page fault. Existing vma_is_accessible() wrapper already
creates the notion of VMA accessibility as a group access permissions.

Hence lets just create VM_ACCESS_FLAGS (VM_READ|VM_WRITE|VM_EXEC) which
will not only reduce code duplication but also extend the VMA
accessibility concept in general.

Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Rob Springer <rspringer@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Link: http://lkml.kernel.org/r/1583391014-8170-3-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/vma: define a default value for VM_DATA_DEFAULT_FLAGS

There are many platforms with exact same value for VM_DATA_DEFAULT_FLAGS
This creates a default value for VM_DATA_DEFAULT_FLAGS in line with the
existing VM_STACK_DEFAULT_FLAGS. While here, also define some more
macros with standard VMA access flag combinations that are used
frequently across many platforms. Apart from simplification, this
reduces code duplication as well.

Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Rich Felker <dalias@libc.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Chris Zankel <chris@zankel.net>
Link: http://lkml.kernel.org/r/1583391014-8170-2-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memory.c: add vm_insert_pages()

Add the ability to insert multiple pages at once to a user VM with lower
PTE spinlock operations.

The intention of this patch-set is to reduce atomic ops for tcp zerocopy
receives, which normally hits the same spinlock multiple times
consecutively.

[akpm@linux-foundation.org: pte_alloc() no longer takes the `addr' argument]
[arjunroy@google.com: add missing page_count() check to vm_insert_pages()]
Link: http://lkml.kernel.org/r/20200214005929.104481-1-arjunroy.kdev@gmail.com
[arjunroy@google.com: vm_insert_pages() checks if pte_index defined]
Link: http://lkml.kernel.org/r/20200228054714.204424-2-arjunroy.kdev@gmail.com
Signed-off-by: Arjun Roy <arjunroy@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: David Miller <davem@davemloft.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Link: http://lkml.kernel.org/r/20200128025958.43490-2-arjunroy.kdev@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: define pte_index as macro for x86

pte_index() is either defined as a macro (e.g.  sparc64) or as an
inlined function (e.g.  x86).  vm_insert_pages() depends on pte_index
but it is not defined on all platforms (e.g.  m68k).

To fix compilation of vm_insert_pages() on architectures not providing
pte_index(), we perform the following fix:

0. For platforms where it is meaningful, and defined as a macro, no
    change is needed.
1. For platforms where it is meaningful and defined as an inlined
    function, and we want to use it with vm_insert_pages(), we define
    a degenerate macro of the form:  #define pte_index pte_index
2. vm_insert_pages() checks for the existence of a pte_index macro
   definition. If found, it implements a batched insert. If not found,
   it devolves to calling vm_insert_page() in a loop.

This patch implements step 1 for x86.

v3 of this patch fixes a compilation warning for an unused method.
v2 of this patch moved a macro definition to a more readable location.

Signed-off-by: Arjun Roy <arjunroy@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: David Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Link: http://lkml.kernel.org/r/20200228054714.204424-1-arjunroy.kdev@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: bring sparc pte_index() semantics inline with other platforms

pte_index() on platforms other than sparc return a numerical index.  On
sparc, it returns a pte_t*.  This presents an issue for
vm_insert_pages(), which relies on pte_index() to find the offset for a
pte within a pmd, for batched inserts.

This patch:
1. Modifies pte_index() for sparc to return a numerical index, like
   other platforms,
2. Defines pte_entry() for sparc which returns a pte_t*
   (as pte_index() used to),
3. Converts existing sparc callers for pte_index() to use pte_entry().

[sfr@canb.auug.org.au: remove pte_entry and just directly modified pte_offset_kernel instead]
Signed-off-by: Arjun Roy <arjunroy@google.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: David Miller <davem@davemloft.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Arjun Roy <arjunroy.kdev@gmail.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Link: http://lkml.kernel.org/r/20200227105045.6b421d9f@canb.auug.org.au
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memory.c: refactor insert_page to prepare for batched-lock insert

Add helper methods for vm_insert_page()/insert_page() to prepare for
vm_insert_pages(), which batch-inserts pages to reduce spinlock
operations when inserting multiple consecutive pages into the user page
table.

The intention of this patch-set is to reduce atomic ops for tcp zerocopy
receives, which normally hits the same spinlock multiple times
consecutively.

Signed-off-by: Arjun Roy <arjunroy@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: David Miller <davem@davemloft.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Link: http://lkml.kernel.org/r/20200128025958.43490-1-arjunroy.kdev@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/mmap.c: initialize align_offset explicitly for vm_unmapped_area

On passing requirement to vm_unmapped_area, arch_get_unmapped_area and
arch_get_unmapped_area_topdown did not set align_offset.  Internally on
both unmapped_area and unmapped_area_topdown, if info->align_mask is 0,
then info->align_offset was meaningless.

But commit df529cabb7a2 ("mm: mmap: add trace point of
vm_unmapped_area") always prints info->align_offset even though it is
uninitialized.

Fix this uninitialized value issue by setting it to 0 explicitly.

Before:
  vm_unmapped_area: addr=0x755b155000 err=0 total_vm=0x15aaf0 flags=0x1 len=0x109000 lo=0x8000 hi=0x75eed48000 mask=0x0 ofs=0x4022

After:
  vm_unmapped_area: addr=0x74a4ca1000 err=0 total_vm=0x168ab1 flags=0x1 len=0x9000 lo=0x8000 hi=0x753d94b000 mask=0x0 ofs=0x0

Signed-off-by: Jaewon Kim <jaewon31.kim@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michel Lespinasse <walken@google.com>
Cc: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/20200409094035.19457-1-jaewon31.kim@samsung.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: hugetlb: optionally allocate gigantic hugepages using cma

Commit 944d9fec8d7a ("hugetlb: add support for gigantic page allocation
at runtime") has added the run-time allocation of gigantic pages.

However it actually works only at early stages of the system loading,
when the majority of memory is free.  After some time the memory gets
fragmented by non-movable pages, so the chances to find a contiguous 1GB
block are getting close to zero.  Even dropping caches manually doesn't
help a lot.

At large scale rebooting servers in order to allocate gigantic hugepages
is quite expensive and complex.  At the same time keeping some constant
percentage of memory in reserved hugepages even if the workload isn't
using it is a big waste: not all workloads can benefit from using 1 GB
pages.

The following solution can solve the problem:
1) On boot time a dedicated cma area* is reserved. The size is passed
   as a kernel argument.
2) Run-time allocations of gigantic hugepages are performed using the
   cma allocator and the dedicated cma area

In this case gigantic hugepages can be allocated successfully with a
high probability, however the memory isn't completely wasted if nobody
is using 1GB hugepages: it can be used for pagecache, anon memory, THPs,
etc.

* On a multi-node machine a per-node cma area is allocated on each node.
  Following gigantic hugetlb allocation are using the first available
  numa node if the mask isn't specified by a user.

Usage:
1) configure the kernel to allocate a cma area for hugetlb allocations:
   pass hugetlb_cma=10G as a kernel argument

2) allocate hugetlb pages as usual, e.g.
   echo 10 > /sys/kernel/mm/hugepages/hugepages-1048576kB/nr_hugepages

If the option isn't enabled or the allocation of the cma area failed,
the current behavior of the system is preserved.

x86 and arm-64 are covered by this patch, other architectures can be
trivially added later.

The patch contains clean-ups and fixes proposed and implemented by Aslan
Bakirov and Randy Dunlap.  It also contains ideas and suggestions
proposed by Rik van Riel, Michal Hocko and Mike Kravetz.  Thanks!

Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Andreas Schaufler <andreas.schaufler@gmx.de>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Aslan Bakirov <aslan@fb.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Link: http://lkml.kernel.org/r/20200407163840.92263-3-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: cma: NUMA node interface

I've noticed that there is no interface exposed by CMA which would let
me to declare contigous memory on particular NUMA node.

This patchset adds the ability to try to allocate contiguous memory on a
specific node. It will fallback to other nodes if the specified one
doesn't work.

Implement a new method for declaring contigous memory on particular node
and keep cma_declare_contiguous() as a wrapper.

[akpm@linux-foundation.org: build fix]
Signed-off-by: Aslan Bakirov <aslan@fb.com>
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Andreas Schaufler <andreas.schaufler@gmx.de>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Link: http://lkml.kernel.org/r/20200407163840.92263-2-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2: no need try to truncate file beyond i_size

Linux fallocate(2) with FALLOC_FL_PUNCH_HOLE mode set, its offset can
exceed the inode size.  Ocfs2 now doesn't allow that offset beyond inode
size.  This restriction is not necessary and violates fallocate(2)
semantics.

If fallocate(2) offset is beyond inode size, just return success and do
nothing further.

Otherwise, ocfs2 will crash the kernel.

  kernel BUG at fs/ocfs2//alloc.c:7264!
   ocfs2_truncate_inline+0x20f/0x360 [ocfs2]
   ocfs2_remove_inode_range+0x23c/0xcb0 [ocfs2]
   __ocfs2_change_file_space+0x4a5/0x650 [ocfs2]
   ocfs2_fallocate+0x83/0xa0 [ocfs2]
   vfs_fallocate+0x148/0x230
   SyS_fallocate+0x48/0x80
   do_syscall_64+0x79/0x170

Signed-off-by: Changwei Ge <chge@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200407082754.17565-1-chge@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/page_alloc: make pcpu_drain_mutex and pcpu_drain static

Fix the following sparse warning:

mm/page_alloc.c:106:1: warning: symbol 'pcpu_drain_mutex' was not declared. Should it be static?
mm/page_alloc.c:107:1: warning: symbol '__pcpu_scope_pcpu_drain' was not declared. Should it be static?

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200407023925.46438-1-yanaijie@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/page_alloc.c: fix kernel-doc warning

Add description of function parameter 'mt' to fix kernel-doc warning:

mm/page_alloc.c:3246: warning: Function parameter or member 'mt' not described in '__putback_isolated_page'

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Link: http://lkml.kernel.org/r/02998bd4-0b82-2f15-2570-f86130304d1e@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

docs: mm: slab.h: fix a broken cross-reference

There is a typo at the cross-reference link, causing this warning:

include/linux/slab.h:11: WARNING: undefined label: memory-allocation (if the link has no caption the label must precede a section header)

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Link: http://lkml.kernel.org/r/0aeac24235d356ebd935d11e147dcc6edbb6465c.1586359676.git.mchehab+huawei@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, slab_common: fix a typo in comment "eariler"->"earlier"

There is a typo in comment, fix it.
s/eariler/earlier/

Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Christoph Lameter <cl@linux.com>
Link: http://lkml.kernel.org/r/20200405160544.1246-1-hqjagain@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, memcg: do not high throttle allocators based on wraparound

If a cgroup violates its memory.high constraints, we may end up unduly
penalising it.  For example, for the following hierarchy:

  A:   max high, 20 usage
  A/B: 9 high, 10 usage
  A/C: max high, 10 usage

We would end up doing the following calculation below when calculating
high delay for A/B:

  A/B: 10 - 9 = 1...
  A:   20 - PAGE_COUNTER_MAX = 21, so set max_overage to 21.

This gets worse with higher disparities in usage in the parent.

I have no idea how this disappeared from the final version of the patch,
but it is certainly Not Good(tm).  This wasn't obvious in testing because,
for a simple cgroup hierarchy with only one child, the result is usually
roughly the same.  It's only in more complex hierarchies that things go
really awry (although still, the effects are limited to a maximum of 2
seconds in schedule_timeout_killable at a maximum).

[chris@chrisdown.name: changelog]
Fixes: e26733e0d0ec ("mm, memcg: throttle allocators based on ancestral memory.high")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Chris Down <chris@chrisdown.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org> [5.4.x]
Link: http://lkml.kernel.org/r/20200331152424.GA1019937@chrisdown.name
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hfsplus: fix crash and filesystem corruption when deleting files

When removing files containing extended attributes, the hfsplus driver may
remove the wrong entries from the attributes b-tree, causing major
filesystem damage and in some cases even kernel crashes.

To remove a file, all its extended attributes have to be removed as well.
The driver does this by looking up all keys in the attributes b-tree with
the cnid of the file.  Each of these entries then gets deleted using the
key used for searching, which doesn't contain the attribute's name when it
should.  Since the key doesn't contain the name, the deletion routine will
not find the correct entry and instead remove the one in front of it.  If
parent nodes have to be modified, these become corrupt as well.  This
causes invalid links and unsorted entries that not even macOS's fsck_hfs
is able to fix.

To fix this, modify the search key before an entry is deleted from the
attributes b-tree by copying the found entry's key into the search key,
therefore ensuring that the correct entry gets removed from the tree.

Signed-off-by: Simon Gander <simon@tuxera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Anton Altaparmakov <anton@tuxera.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200327155541.1521-1-simon@tuxera.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

printk: queue wake_up_klogd irq_work only if per-CPU areas are ready

printk_deferred(), similarly to printk_safe/printk_nmi, does not
immediately attempt to print a new message on the consoles, avoiding
calls into non-reentrant kernel paths, e.g. scheduler or timekeeping,
which potentially can deadlock the system.

Those printk() flavors, instead, rely on per-CPU flush irq_work to print
messages from safer contexts. For same reasons (recursive scheduler or
timekeeping calls) printk() uses per-CPU irq_work in order to wake up
user space syslog/kmsg readers.

However, only printk_safe/printk_nmi do make sure that per-CPU areas
have been initialised and that it's safe to modify per-CPU irq_work.
This means that, for instance, should printk_deferred() be invoked "too
early", that is before per-CPU areas are initialised, printk_deferred()
will perform illegal per-CPU access.

Lech Perczak [0] reports that after commit 1b710b1b10ef ("char/random:
silence a lockdep splat with printk()") user-space syslog/kmsg readers
are not able to read new kernel messages.

The reason is printk_deferred() being called too early (as was pointed
out by Petr and John).

Fix printk_deferred() and do not queue per-CPU irq_work before per-CPU
areas are initialized.

Link: https://lore.kernel.org/lkml/aa0732c6-5c4e-8a8b-a1c1-75ebe3dca05b@camlintechnologies.com/
Reported-by: Lech Perczak <l.perczak@camlintechnologies.com>
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Tested-by: Jann Horn <jannh@google.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'for-linus' of git://git./linux/kernel/git/ebiederm/user-namespace

Pull proc fix from Eric Biederman:
"A brown paper bag slipped through my proc changes, and syzcaller
  caught it when the code ended up in your tree.

  I have opted to fix it the simplest cleanest way I know how, so there
  is no reasonable chance for the bug to repeat"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  proc: Use a dedicated lock in struct pid

Merge tag 'pwm/for-5.7-rc1' of git://git./linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
"There's quite a few changes this time around.

  Most of these are fixes and cleanups, but there's also new chip
  support for some drivers and a bit of rework"

* tag 'pwm/for-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (33 commits)
  pwm: pca9685: Fix PWM/GPIO inter-operation
  pwm: Make pwm_apply_state_debug() static
  pwm: meson: Remove redundant assignment to variable fin_freq
  pwm: jz4740: Allow selection of PWM channels 0 and 1
  pwm: jz4740: Obtain regmap from parent node
  pwm: jz4740: Improve algorithm of clock calculation
  pwm: jz4740: Use clocks from TCU driver
  pwm: sun4i: Remove redundant needs_delay
  pwm: omap-dmtimer: Implement .apply callback
  pwm: omap-dmtimer: Do not disable PWM before changing period/duty_cycle
  pwm: omap-dmtimer: Fix PWM enabling sequence
  pwm: omap-dmtimer: Update description for PWM OMAP DM timer
  pwm: omap-dmtimer: Drop unused header file
  pwm: renesas-tpu: Drop confusing registered message
  pwm: renesas-tpu: Fix late Runtime PM enablement
  pwm: rcar: Fix late Runtime PM enablement
  dt-bindings: pwm: renesas-tpu: Document more R-Car Gen2 support
  pwm: meson: Fix confusing indentation
  pwm: pca9685: Use gpio core provided macro GPIO_LINE_DIRECTION_OUT
  pwm: pca9685: Replace CONFIG_PM with __maybe_unused
  ...

Merge tag 'for-linus-5.7-1' of git://github.com/cminyard/linux-ipmi

Pull IPMI updates from Corey Minyard:
"Bug fixes for main IPMI driver, kcs updates

  A couple of bug fixes for the main IPMI driver, one functional and two
  annotations.

  The kcs driver has some significant updates that have been pending for
  a while, but I forgot to include in next until a week ago. But this
  code is only used by the people who are sending it to me, really, so
  it's not a big deal. I did want it to sit in next for at least a week,
  and it did result in a fix"

* tag 'for-linus-5.7-1' of git://github.com/cminyard/linux-ipmi:
  ipmi: kcs: Fix aspeed_kcs_probe_of_v1()
  ipmi: Add missing annotation for ipmi_ssif_lock_cond() and ipmi_ssif_unlock_cond()
  ipmi: kcs: aspeed: Implement v2 bindings
  ipmi: kcs: Finish configuring ASPEED KCS device before enable
  dt-bindings: ipmi: aspeed: Introduce a v2 binding for KCS
  ipmi: fix hung processes in __get_guid()
  drivers: char: ipmi: ipmi_msghandler: Pass lockdep expression to RCU lists

Merge tag 'drm-next-2020-04-10' of git://anongit.freedesktop.org/drm/drm

Pull more drm fixes from Dave Airlie:
"As expected, more fixes did turn up in the latter part of the week.

  The drm_local_map build regression fix is here, along with temporary
  disabling of the hugepage work due to some amdgpu related crashes.

  Otherwise it's just a bunch of i915, and amdgpu fixes.

  legacy:
   - fix drm_local_map.offset type

  ttm:
   - temporarily disable hugepages to debug amdgpu problems.

  prime:
   - fix sg extraction

  amdgpu:
   - Various Renoir fixes
   - Fix gfx clockgating sequence on gfx10
   - RAS fixes
   - Avoid MST property creation after registration
   - Various cursor/viewport fixes
   - Fix a confusing log message about optional firmwares

  i915:
   - Flush all the reloc_gpu batch (Chris)
   - Ignore readonly failures when updating relocs (Chris)
   - Fill all the unused space in the GGTT (Chris)
   - Return the right vswing table (Jose)
   - Don't enable DDI IO power on a TypeC port in TBT mode for ICL+ (Imre)

  analogix_dp:
   - probe fix

  virtio:
   - oob fix in object create"

* tag 'drm-next-2020-04-10' of git://anongit.freedesktop.org/drm/drm: (34 commits)
  drm/ttm: Temporarily disable the huge_fault() callback
  drm/bridge: analogix_dp: Split bind() into probe() and real bind()
  drm/legacy: Fix type for drm_local_map.offset
  drm/amdgpu/display: fix warning when compiling without debugfs
  drm/amdgpu: unify fw_write_wait for new gfx9 asics
  drm/amd/powerplay: error out on forcing clock setting not supported
  drm/amdgpu: fix gfx hang during suspend with video playback (v2)
  drm/amd/display: Check for null fclk voltage when parsing clock table
  drm/amd/display: Acknowledge wm_optimized_required
  drm/amd/display: Make cursor source translation adjustment optional
  drm/amd/display: Calculate scaling ratios on every medium/full update
  drm/amd/display: Program viewport when source pos changes for DCN20 hw seq
  drm/amd/display: Fix incorrect cursor pos on scaled primary plane
  drm/amd/display: change default pipe_split policy for DCN1
  drm/amd/display: Translate cursor position by source rect
  drm/amd/display: Update stream adjust in dc_stream_adjust_vmin_vmax
  drm/amd/display: Avoid create MST prop after registration
  drm/amdgpu/psp: dont warn on missing optional TA's
  drm/amdgpu: update RAS related dmesg print
  drm/amdgpu: resolve mGPU RAS query instability
  ...

Merge tag 'sound-fix-5.7-rc1' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
"A collection of small fixes gathered since the previous update.

  ALSA core:
   - Regression fix for OSS PCM emulation

  ASoC:
   - Trivial fixes in reg bit mask ops, DAPM, DPCM and topology
   - Lots of fixes for Intel-based devices
   - Minor fixes for AMD, STM32, Qualcomm, Realtek

  Others:
   - Fixes for the bugs in mixer handling in HD-audio and ice1724
     drivers that were caught by the recent kctl validator
   - New quirks for HD-audio and USB-audio

  Also this contains a fix for EDD firmware fix, which slipped from
  anyone's hands"

* tag 'sound-fix-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (35 commits)
  ALSA: hda: Add driver blacklist
  ALSA: usb-audio: Add mixer workaround for TRX40 and co
  ALSA: hda/realtek - Add quirk for MSI GL63
  ALSA: ice1724: Fix invalid access for enumerated ctl items
  ALSA: hda: Fix potential access overflow in beep helper
  ASoC: cs4270: pull reset GPIO low then high
  ALSA: hda/realtek - Add HP new mute led supported for ALC236
  ALSA: hda/realtek - Add supported new mute Led for HP
  ASoC: rt5645: Add platform-data for Medion E1239T
  ASoC: Intel: bytcr_rt5640: Add quirk for MPMAN MPWIN895CL tablet
  ASoC: stm32: sai: Add missing cleanup
  ALSA: usb-audio: Add registration quirk for Kingston HyperX Cloud Alpha S
  ASoC: Intel: atom: Fix uninitialized variable compiler warning
  ASoC: Intel: atom: Check drv->lock is locked in sst_fill_and_send_cmd_unlocked
  ASoC: Intel: atom: Take the drv->lock mutex before calling sst_send_slot_map()
  ASoC: SOF: Turn "firmware boot complete" message into a dbg message
  ALSA: usb-audio: Add Pioneer DJ DJM-250MK2 quirk
  ALSA: pcm: oss: Fix regression by buffer overflow fix (again)
  ALSA: pcm: oss: Fix regression by buffer overflow fix
  edd: Use scnprintf() for avoiding potential buffer overflow
  ...

Merge tag 'scsi-misc' of git://git./linux/kernel/git/jejb/scsi

Pull more SCSI updates from James Bottomley:
"This is a batch of changes that didn't make it in the initial pull
  request because the lpfc series had to be rebased to redo an incorrect
  split.

  It's basically driver updates to lpfc, target, bnx2fc and ufs with the
  rest being minor updates except the sr_block_release one which fixes a
  use after free introduced by the removal of the global mutex in the
  first patch set"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (35 commits)
  scsi: core: Add DID_ALLOC_FAILURE and DID_MEDIUM_ERROR to hostbyte_table
  scsi: ufs: Use ufshcd_config_pwr_mode() when scaling gear
  scsi: bnx2fc: fix boolreturn.cocci warnings
  scsi: zfcp: use fallthrough;
  scsi: aacraid: do not overwrite retval in aac_reset_adapter()
  scsi: sr: Fix sr_block_release()
  scsi: aic7xxx: Remove more FreeBSD-specific code
  scsi: mpt3sas: Fix kernel panic observed on soft HBA unplug
  scsi: ufs: set device as active power mode after resetting device
  scsi: iscsi: Report unbind session event when the target has been removed
  scsi: lpfc: Change default SCSI LUN QD to 64
  scsi: libfc: rport state move to PLOGI if all PRLI retry exhausted
  scsi: libfc: If PRLI rejected, move rport to PLOGI state
  scsi: bnx2fc: Update the driver version to 2.12.13
  scsi: bnx2fc: Fix SCSI command completion after cleanup is posted
  scsi: bnx2fc: Process the RQE with CQE in interrupt context
  scsi: target: use the stack for XCOPY passthrough cmds
  scsi: target: increase XCOPY I/O size
  scsi: target: avoid per-loop XCOPY buffer allocations
  scsi: target: drop xcopy DISK BLOCK LENGTH debug
  ...

Merge tag 'libata-5.7-2020-04-09' of git://git.kernel.dk/linux-block

Pull libata fixes from Jens Axboe:
"A few followup changes/fixes for libata:

   - PMP removal fix (Kai-Heng)

   - Add remapped NVMe device attribute to sysfs (Kai-Heng)

   - Remove redundant assignment (Colin)

   - Add yet another Comet Lake ID (Jian-Hong)"

* tag 'libata-5.7-2020-04-09' of git://git.kernel.dk/linux-block:
  ahci: Add Intel Comet Lake PCH RAID PCI ID
  ata: ahci: Add sysfs attribute to show remapped NVMe device count
  ata: ahci-imx: remove redundant assignment to ret
  libata: Return correct status in sata_pmp_eh_recover_pm() when ATA_DFLAG_DETACH is set

Merge tag 'block-5.7-2020-04-10' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:
"Here's a set of fixes that should go into this merge window. This
  contains:

   - NVMe pull request from Christoph with various fixes

   - Better discard support for loop (Evan)

   - Only call ->commit_rqs() if we have queued IO (Keith)

   - blkcg offlining fixes (Tejun)

   - fix (and fix the fix) for busy partitions"

* tag 'block-5.7-2020-04-10' of git://git.kernel.dk/linux-block:
  block: fix busy device checking in blk_drop_partitions again
  block: fix busy device checking in blk_drop_partitions
  nvmet-rdma: fix double free of rdma queue
  blk-mq: don't commit_rqs() if none were queued
  nvme-fc: Revert "add module to ops template to allow module references"
  nvme: fix deadlock caused by ANA update wrong locking
  nvmet-rdma: fix bonding failover possible NULL deref
  loop: Better discard support for block devices
  loop: Report EOPNOTSUPP properly
  nvmet: fix NULL dereference when removing a referral
  nvme: inherit stable pages constraint in the mpath stack device
  blkcg: don't offline parent blkcg first
  blkcg: rename blkcg->cgwb_refcnt to ->online_pin and always use it
  nvme-tcp: fix possible crash in recv error flow
  nvme-tcp: don't poll a non-live queue
  nvme-tcp: fix possible crash in write_zeroes processing
  nvmet-fc: fix typo in comment
  nvme-rdma: Replace comma with a semicolon
  nvme-fcloop: fix deallocation of working context
  nvme: fix compat address handling in several ioctls

Merge tag 'io_uring-5.7-2020-04-09' of git://git.kernel.dk/linux-block

Pull io_uring fixes from Jens Axboe:
"Here's a set of fixes that either weren't quite ready for the first,
  or came about from some intensive testing on memcached with 350K+
  sockets.

  Summary:

   - Fixes for races or deadlocks around poll handling

   - Don't double account fixed files against RLIMIT_NOFILE

   - IORING_OP_OPENAT LFS fix

   - Poll retry handling (Bijan)

   - Missing finish_wait() for SQPOLL (Hillf)

   - Cleanup/split of io_kiocb alloc vs ctx references (Pavel)

   - Fixed file unregistration and init fixes (Xiaoguang)

   - Various little fixes (Xiaoguang, Pavel, Colin)"

* tag 'io_uring-5.7-2020-04-09' of git://git.kernel.dk/linux-block:
  io_uring: punt final io_ring_ctx wait-and-free to workqueue
  io_uring: fix fs cleanup on cqe overflow
  io_uring: don't read user-shared sqe flags twice
  io_uring: remove req init from io_get_req()
  io_uring: alloc req only after getting sqe
  io_uring: simplify io_get_sqring
  io_uring: do not always copy iovec in io_req_map_rw()
  io_uring: ensure openat sets O_LARGEFILE if needed
  io_uring: initialize fixed_file_data lock
  io_uring: remove redundant variable pointer nxt and io_wq_assign_next call
  io_uring: fix ctx refcounting in io_submit_sqes()
  io_uring: process requests completed with -EAGAIN on poll list
  io_uring: remove bogus RLIMIT_NOFILE check in file registration
  io_uring: use io-wq manager as backup task if task is exiting
  io_uring: grab task reference for poll requests
  io_uring: retry poll if we got woken with non-matching mask
  io_uring: add missing finish_wait() in io_sq_thread()
  io_uring: refactor file register/unregister/update handling

Merge tag 'xfs-5.7-merge-12' of git://git./fs/xfs/xfs-linux

Pull more xfs updates from Darrick Wong:
"As promised last week, this batch changes how xfs interacts with
  memory reclaim; how the log batches and throttles log items; how hard
  writes near ENOSPC will try to squeeze more space out of the
  filesystem; and hopefully fix the last of the umount hangs after a
  catastrophic failure.

  Summary:

   - Validate the realtime geometry in the superblock when mounting

   - Refactor a bunch of tricky flag handling in the log code

   - Flush the CIL more judiciously so that we don't wait until there
     are millions of log items consuming a lot of memory.

   - Throttle transaction commits to prevent the xfs frontend from
     flooding the CIL with too many log items.

   - Account metadata buffers correctly for memory reclaim.

   - Mark slabs properly for memory reclaim. These should help reclaim
     run more effectively when XFS is using a lot of memory.

   - Don't write a garbage log record at unmount time if we're trying to
     trigger summary counter recalculation at next mount.

   - Don't block the AIL on locked dquot/inode buffers; instead trigger
     its backoff mechanism to give the lock holder a chance to finish
     up.

   - Ratelimit writeback flushing when buffered writes encounter ENOSPC.

   - Other minor cleanups.

   - Make reflink a synchronous operation when the fs is mounted with
     wsync or sync, which means that now we force the log to disk to
     record the changes"

* tag 'xfs-5.7-merge-12' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (26 commits)
  xfs: reflink should force the log out if mounted with wsync
  xfs: factor out a new xfs_log_force_inode helper
  xfs: fix inode number overflow in ifree cluster helper
  xfs: remove redundant variable assignment in xfs_symlink()
  xfs: ratelimit inode flush on buffered write ENOSPC
  xfs: return locked status of inode buffer on xfsaild push
  xfs: trylock underlying buffer on dquot flush
  xfs: remove unnecessary ternary from xfs_create
  xfs: don't write a corrupt unmount record to force summary counter recalc
  xfs: factor inode lookup from xfs_ifree_cluster
  xfs: tail updates only need to occur when LSN changes
  xfs: factor common AIL item deletion code
  xfs: correctly acount for reclaimable slabs
  xfs: Improve metadata buffer reclaim accountability
  xfs: don't allow log IO to be throttled
  xfs: Throttle commits on delayed background CIL push
  xfs: Lower CIL flush limit for large logs
  xfs: remove some stale comments from the log code
  xfs: refactor unmount record writing
  xfs: merge xlog_commit_record with xlog_write_done
  ...

Merge tag 'acpi-5.7-rc1-3' of git://git./linux/kernel/git/rafael/linux-pm

Pull more ACPI updates from Rafael Wysocki:
"These prevent a false-positive static checker warning from triggering
  in the ACPI EC driver (Rafael Wysocki), fix white space in an ACPI
  document (Vilhelm Prytz) and add static annotation to one variable
  (Jason Yan)"

* tag 'acpi-5.7-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI, x86/boot: make acpi_nobgrt static
  Documentation: firmware-guide: ACPI: fix table alignment in namespace.rst
  ACPI: EC: Fix up fast path check in acpi_ec_add()

Merge tag 'pm-5.7-rc1-3' of git://git./linux/kernel/git/rafael/linux-pm

Pull more power management updates from Rafael Wysocki:
"Rework compat ioctl handling in the user space hibernation interface
  (Christoph Hellwig) and fix a typo in a function name in the cpuidle
  haltpoll driver (Yihao Wu)"

* tag 'pm-5.7-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpuidle-haltpoll: Fix small typo
  PM / sleep: handle the compat case in snapshot_set_swap_area()
  PM / sleep: move SNAPSHOT_SET_SWAP_AREA handling into a helper

Merge tag 's390-5.7-2' of git://git./linux/kernel/git/s390/linux

Pull more s390 updates from Vasily Gorbik:
"Second round of s390 fixes and features for 5.7:

   - The rest of fallthrough; annotations conversion

   - Couple of fixes for ADD uevents in the common I/O layer

   - Minor refactoring of the queued direct I/O code"

* tag 's390-5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/cio: generate delayed uevent for vfio-ccw subchannels
  s390/cio: avoid duplicated 'ADD' uevents
  s390/qdio: clear DSCI early for polling drivers
  s390/qdio: inline shared_ind()
  s390/qdio: remove cdev from init_data
  s390/qdio: allow for non-contiguous SBAL array in init_data
  zfcp: inline zfcp_qdio_setup_init_data()
  s390/qdio: cleanly split alloc and establish
  s390/mm: use fallthrough;

Documentation: android: binderfs: add 'stats' mount option

Add documentation of the binderfs 'stats' mount option.

Description taken from the commit message.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/baa0aa81-007d-af46-16a5-91fead0bd1b9@infradead.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

block: fix busy device checking in blk_drop_partitions again

The previous fix had an off by one in the bd_openers checking, counting
the callers blkdev_get.

Fixes: d3ef5536274f ("block: fix busy device checking in blk_drop_partitions")
Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Qian Cai <cai@lca.pw>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge branch 'pm-cpuidle'

* pm-cpuidle:
cpuidle-haltpoll: Fix small typo

Merge branches 'acpi-ec' and 'acpi-x86'

* acpi-ec:
ACPI: EC: Fix up fast path check in acpi_ec_add()

* acpi-x86:
ACPI, x86/boot: make acpi_nobgrt static

io_uring: punt final io_ring_ctx wait-and-free to workqueue

We can't reliably wait in io_ring_ctx_wait_and_kill(), since the
task_works list isn't ordered (in fact it's LIFO ordered). We could
either fix this with a separate task_works list for io_uring work, or
just punt the wait-and-free to async context. This ensures that
task_work that comes in while we're shutting down is processed
correctly. If we don't go async, we could have work past the fput()
work for the ring that depends on work that won't be executed until
after we're done with the wait-and-free. But as this operation is
blocking, it'll never get a chance to run.

This was reproduced with hundreds of thousands of sockets running
memcached, haven't been able to reproduce this synthetically.

Reported-by: Dan Melnic <dmm@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge tag 'amd-drm-fixes-5.7-2020-04-08' of git://people.freedesktop.org/~agd5f/linux into drm-next

amd-drm-fixes-5.7-2020-04-08:

amdgpu:
- Various Renoir fixes
- Fix gfx clockgating sequence on gfx10
- RAS fixes
- Avoid MST property creation after registration
- Various cursor/viewport fixes
- Fix a confusing log message about optional firmwares

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408222240.3942-1-alexander.deucher@amd.com

Merge tag 'drm-intel-next-fixes-2020-04-08' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

- Flush all the reloc_gpu batch (Chris)
- Ignore readonly failures when updating relocs (Chris)
- Fill all the unused space in the GGTT (Chris)
- Return the right vswing table (Jose)
- Don't enable DDI IO power on a TypeC port in TBT mode for ICL+ (Imre)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408215952.GA1623934@intel.com

drm/ttm: Temporarily disable the huge_fault() callback

With amdgpu and CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y, there are
errors like:
BUG: non-zero pgtables_bytes on freeing mm
and:
BUG: Bad rss-counter state
with TTM transparent huge-pages.
Until we've figured out what other TTM drivers do differently compared to
vmwgfx, disable the huge_fault() callback, eliminating transhuge
page-table entries.

Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Thomas Hellstrom (VMware) <thomas_os@shipmail.org>
Reported-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
Tested-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200409164925.11912-1-thomas_os@shipmail.org

Merge tag 'drm-misc-next-fixes-2020-04-09' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

A few DMA-related fixes, an OOB fix for virtio and a probe-related fix for
analogix_dp

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200409091424.cfpqqbqjxtkgnfme@gilmour.lan

Merge tag 'modules-for-v5.7' of git://git./linux/kernel/git/jeyu/linux

Pull module updates from Jessica Yu:
"Only a small cleanup this time around: a trivial conversion of
zero-length arrays to flexible arrays"

* tag 'modules-for-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
kernel: module: Replace zero-length array with flexible-array member

Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull arm64 fixes from Catalin Marinas:

- Ensure that the compiler and linker versions are aligned so that ld
   doesn't complain about not understanding a .note.gnu.property section
   (emitted when pointer authentication is enabled).

- Force -mbranch-protection=none when the feature is not enabled, in
   case a compiler may choose a different default value.

- Remove CONFIG_DEBUG_ALIGN_RODATA. It was never in defconfig and
   rarely enabled.

- Fix checking 16-bit Thumb-2 instructions checking mask in the
   emulation of the SETEND instruction (it could match the bottom half
   of a 32-bit Thumb-2 instruction).

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: armv8_deprecated: Fix undef_hook mask for thumb setend
  arm64: remove CONFIG_DEBUG_ALIGN_RODATA feature
  arm64: Always force a branch protection mode when the compiler has one
  arm64: Kconfig: ptrauth: Add binutils version check to fix mismatch
  init/kconfig: Add LD_VERSION Kconfig

Merge tag 'powerpc-5.7-2' of git://git./linux/kernel/git/powerpc/linux

Pull more powerpc updates from Michael Ellerman:
"The bulk of this is the series to make CONFIG_COMPAT user-selectable,
  it's been around for a long time but was blocked behind the
  syscall-in-C series.

  Plus there's also a few fixes and other minor things.

  Summary:

   - A fix for a crash in machine check handling on pseries (ie. guests)

   - A small series to make it possible to disable CONFIG_COMPAT, and
     turn it off by default for ppc64le where it's not used.

   - A few other miscellaneous fixes and small improvements.

  Thanks to: Alexey Kardashevskiy, Anju T Sudhakar, Arnd Bergmann,
  Christophe Leroy, Dan Carpenter, Ganesh Goudar, Geert Uytterhoeven,
  Geoff Levand, Mahesh Salgaonkar, Markus Elfring, Michal Suchanek,
  Nicholas Piggin, Stephen Boyd, Wen Xiong"

* tag 'powerpc-5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  selftests/powerpc: Always build the tm-poison test 64-bit
  powerpc: Improve ppc_save_regs()
  Revert "powerpc/64: irq_work avoid interrupt when called with hardware irqs enabled"
  powerpc/time: Replace <linux/clk-provider.h> by <linux/of_clk.h>
  powerpc/pseries/ddw: Extend upper limit for huge DMA window for persistent memory
  powerpc/perf: split callchain.c by bitness
  powerpc/64: Make COMPAT user-selectable disabled on littleendian by default.
  powerpc/64: make buildable without CONFIG_COMPAT
  powerpc/perf: consolidate valid_user_sp -> invalid_user_sp
  powerpc/perf: consolidate read_user_stack_32
  powerpc: move common register copy functions from signal_32.c to signal.c
  powerpc: Add back __ARCH_WANT_SYS_LLSEEK macro
  powerpc/ps3: Set CONFIG_UEVENT_HELPER=y in ps3_defconfig
  powerpc/ps3: Remove an unneeded NULL check
  powerpc/ps3: Remove duplicate error message
  powerpc/powernv: Re-enable imc trace-mode in kernel
  powerpc/perf: Implement a global lock to avoid races between trace, core and thread imc events.
  powerpc/pseries: Fix MCE handling on pseries
  selftests/eeh: Skip ahci adapters
  powerpc/64s: Fix doorbell wakeup msgclr optimisation

Merge branch 'for-next' of git://git./linux/kernel/git/gerg/m68knommu

Pull m68knommu update from Greg Ungerer:
"Only a single commit, to remove all use of the obsolete setup_irq()
calls within the m68knommu architecture code"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: Replace setup_irq() by request_irq()

Merge tag 'riscv-for-linus-5.7' of git://git./linux/kernel/git/riscv/linux

Pull RISC-V updates from Palmer Dabbelt:
"This contains a handful of new features:

   - Partial support for the Kendryte K210.

     There are still a few outstanding issues that I have patches for,
     but I don't actually have a board to test them so they're not
     included yet.

   - SBI v0.2 support.

   - Fixes to support for building with LLVM-based toolchains. The
     resulting images are known not to boot yet.

  I don't anticipate a part two, but I'll probably have something early
  in the RCs to finish up the K210 support"

* tag 'riscv-for-linus-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (38 commits)
  riscv: create a loader.bin boot image for Kendryte SoC
  riscv: Kendryte K210 default config
  riscv: Add Kendryte K210 device tree
  riscv: Select required drivers for Kendryte SOC
  riscv: Add Kendryte K210 SoC support
  riscv: Add SOC early init support
  riscv: Unaligned load/store handling for M_MODE
  RISC-V: Support cpu hotplug
  RISC-V: Add supported for ordered booting method using HSM
  RISC-V: Add SBI HSM extension definitions
  RISC-V: Export SBI error to linux error mapping function
  RISC-V: Add cpu_ops and modify default booting method
  RISC-V: Move relocate and few other functions out of __init
  RISC-V: Implement new SBI v0.2 extensions
  RISC-V: Introduce a new config for SBI v0.1
  RISC-V: Add SBI v0.2 extension definitions
  RISC-V: Add basic support for SBI v0.2
  RISC-V: Mark existing SBI as 0.1 SBI.
  riscv: Use macro definition instead of magic number
  riscv: Add support to dump the kernel page tables
  ...

proc: Use a dedicated lock in struct pid

syzbot wrote:
> ========================================================
> WARNING: possible irq lock inversion dependency detected
> 5.6.0-syzkaller #0 Not tainted
> --------------------------------------------------------
> swapper/1/0 just changed the state of lock:
> ffffffff898090d8 (tasklist_lock){.+.?}-{2:2}, at: send_sigurg+0x9f/0x320 fs/fcntl.c:840
> but this lock took another, SOFTIRQ-unsafe lock in the past:
>  (&pid->wait_pidfd){+.+.}-{2:2}
>
>
> and interrupts could create inverse lock ordering between them.
>
>
> other info that might help us debug this:
>  Possible interrupt unsafe locking scenario:
>
>        CPU0                    CPU1
>        ----                    ----
>   lock(&pid->wait_pidfd);
>                                local_irq_disable();
>                                lock(tasklist_lock);
>                                lock(&pid->wait_pidfd);
>   <Interrupt>
>     lock(tasklist_lock);
>
>  *** DEADLOCK ***
>
> 4 locks held by swapper/1/0:

The problem is that because wait_pidfd.lock is taken under the tasklist
lock.  It must always be taken with irqs disabled as tasklist_lock can be
taken from interrupt context and if wait_pidfd.lock was already taken this
would create a lock order inversion.

Oleg suggested just disabling irqs where I have added extra calls to
wait_pidfd.lock.  That should be safe and I think the code will eventually
do that.  It was rightly pointed out by Christian that sharing the
wait_pidfd.lock was a premature optimization.

It is also true that my pre-merge window testing was insufficient.  So
remove the premature optimization and give struct pid a dedicated lock of
it's own for struct pid things.  I have verified that lockdep sees all 3
paths where we take the new pid->lock and lockdep does not complain.

It is my current day dream that one day pid->lock can be used to guard the
task lists as well and then the tasklist_lock won't need to be held to
deliver signals.  That will require taking pid->lock with irqs disabled.

Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/lkml/00000000000011d66805a25cd73f@google.com/
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Reported-by: syzbot+343f75cdeea091340956@syzkaller.appspotmail.com
Reported-by: syzbot+832aabf700bc3ec920b9@syzkaller.appspotmail.com
Reported-by: syzbot+f675f964019f884dbd0f@syzkaller.appspotmail.com
Reported-by: syzbot+a9fb1457d720a55d6dc5@syzkaller.appspotmail.com
Fixes: 7bc3e6e55acf ("proc: Use a list of inodes to flush from proc")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

io_uring: fix fs cleanup on cqe overflow

If completion queue overflow occurs, __io_cqring_fill_event() will
update req->cflags, which is in a union with req->work and happens to
be aliased to req->work.fs. Following io_free_req() ->
io_req_work_drop_env() may get a bunch of different problems (miscount
fs->users, segfault, etc) on cleaning @fs.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

ahci: Add Intel Comet Lake PCH RAID PCI ID

Intel Comet Lake should use the default LPM policy for mobile chipsets.
So, add the PCI ID to the driver list of supported devices.

Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

x86/xen: fix booting 32-bit pv guest

Commit 2f62f36e62daec ("x86/xen: Make the boot CPU idle task reliable")
introduced a regression for booting 32 bit Xen PV guests: the address
of the initial stack needs to be a virtual one.

Fixes: 2f62f36e62daec ("x86/xen: Make the boot CPU idle task reliable")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20200409070001.16675-1-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>

drm/bridge: analogix_dp: Split bind() into probe() and real bind()

Analogix_dp driver acquires all its resources in the ->bind() callback,
what is a bit against the component driver based approach, where the
driver initialization is split into a probe(), where all resources are
gathered, and a bind(), where all objects are created and a compound
driver is initialized.

Extract all the resource related operations to analogix_dp_probe() and
analogix_dp_remove(), then call them before/after registration of the
device components from the main Exynos DP and Rockchip DP drivers. Also
move the plat_data initialization to the probe() to make it available for
the analogix_dp_probe() function.

This fixes the multiple calls to the bind() of the DRM compound driver
when the DP PHY driver is not yet loaded/probed:

[drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations
exynos-drm exynos-drm: bound 14400000.fimd (ops fimd_component_ops [exynosdrm])
exynos-drm exynos-drm: bound 14450000.mixer (ops mixer_component_ops [exynosdrm])
exynos-dp 145b0000.dp-controller: no DP phy configured
exynos-drm exynos-drm: failed to bind 145b0000.dp-controller (ops exynos_dp_ops [exynosdrm]): -517
exynos-drm exynos-drm: master bind failed: -517
...
[drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations
exynos-drm exynos-drm: bound 14400000.fimd (ops hdmi_enable [exynosdrm])
exynos-drm exynos-drm: bound 14450000.mixer (ops hdmi_enable [exynosdrm])
exynos-drm exynos-drm: bound 145b0000.dp-controller (ops hdmi_enable [exynosdrm])
exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_enable [exynosdrm])
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
Console: switching to colour frame buffer device 170x48
exynos-drm exynos-drm: fb0: exynosdrmfb frame buffer device
[drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 1
...

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200310103427.26048-1-m.szyprowski@samsung.com
(cherry picked from commit 83a196773b8bc6702f49df1eddc848180e350340)
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/legacy: Fix type for drm_local_map.offset

drm_local_map.offset is not only used for resource_size_t but also
dma_addr_t which may be of different sizes.

Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Fixes: 8e4ff9b56957 ("drm: Remove the dma_alloc_coherent wrapper for internal usage")
Tested-by: Nathan Chancellor <natechancellor@gmail.com> # build
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200402215926.30714-1-chris@chris-wilson.co.uk

Merge tag '9p-for-5.7-2' of git://github.com/martinetd/linux

Pull 9p documentation update from Dominique Martinet:
"Document the new O_NONBLOCK short read behavior"

* tag '9p-for-5.7-2' of git://github.com/martinetd/linux:
9p: document short read behaviour with O_NONBLOCK

Merge tag 'ceph-for-5.7-rc1' of git://github.com/ceph/ceph-client

Pull ceph updates from Ilya Dryomov:
"The main items are:

   - support for asynchronous create and unlink (Jeff Layton).

     Creates and unlinks are satisfied locally, without waiting for a
     reply from the MDS, provided the client has been granted
     appropriate caps (new in v15.y.z ("Octopus") release). This can be
     a big help for metadata heavy workloads such as tar and rsync.
     Opt-in with the new nowsync mount option.

   - multiple blk-mq queues for rbd (Hannes Reinecke and myself).

     When the driver was converted to blk-mq, we settled on a single
     blk-mq queue because of a global lock in libceph and some other
     technical debt. These have since been addressed, so allocate a
     queue per CPU to enhance parallelism.

   - don't hold onto caps that aren't actually needed (Zheng Yan).

     This has been our long-standing behavior, but it causes issues with
     some active/standby applications (synchronous I/O, stalls if the
     standby goes down, etc).

   - .snap directory timestamps consistent with ceph-fuse (Luis
     Henriques)"

* tag 'ceph-for-5.7-rc1' of git://github.com/ceph/ceph-client: (49 commits)
  ceph: fix snapshot directory timestamps
  ceph: wait for async creating inode before requesting new max size
  ceph: don't skip updating wanted caps when cap is stale
  ceph: request new max size only when there is auth cap
  ceph: cleanup return error of try_get_cap_refs()
  ceph: return ceph_mdsc_do_request() errors from __get_parent()
  ceph: check all mds' caps after page writeback
  ceph: update i_requested_max_size only when sending cap msg to auth mds
  ceph: simplify calling of ceph_get_fmode()
  ceph: remove delay check logic from ceph_check_caps()
  ceph: consider inode's last read/write when calculating wanted caps
  ceph: always renew caps if mds_wanted is insufficient
  ceph: update dentry lease for async create
  ceph: attempt to do async create when possible
  ceph: cache layout in parent dir on first sync create
  ceph: add new MDS req field to hold delegated inode number
  ceph: decode interval_sets for delegated inos
  ceph: make ceph_fill_inode non-static
  ceph: perform asynchronous unlink if we have sufficient caps
  ceph: don't take refs to want mask unless we have all bits
  ...

Merge tag 'ovl-update-5.7' of git://git./linux/kernel/git/mszeredi/vfs

Pull overlayfs update from Miklos Szeredi:

- Fix failure to copy-up files from certain NFSv4 mounts

- Sort out inconsistencies between st_ino and i_ino (used in /proc/locks)

- Allow consistent (POSIX-y) inode numbering in more cases

- Allow virtiofs to be used as upper layer

- Miscellaneous cleanups and fixes

* tag 'ovl-update-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
  ovl: document xino expected behavior
  ovl: enable xino automatically in more cases
  ovl: avoid possible inode number collisions with xino=on
  ovl: use a private non-persistent ino pool
  ovl: fix WARN_ON nlink drop to zero
  ovl: fix a typo in comment
  ovl: replace zero-length array with flexible-array member
  ovl: ovl_obtain_alias(): don't call d_instantiate_anon() for old
  ovl: strict upper fs requirements for remote upper fs
  ovl: check if upper fs supports RENAME_WHITEOUT
  ovl: allow remote upper
  ovl: decide if revalidate needed on a per-dentry basis
  ovl: separate detection of remote upper layer from stacked overlay
  ovl: restructure dentry revalidation
  ovl: ignore failure to copy up unknown xattrs
  ovl: document permission model
  ovl: simplify i_ino initialization
  ovl: factor out helper ovl_get_root()
  ovl: fix out of date comment and unreachable code
  ovl: fix value of i_ino for lower hardlink corner case

Merge tag 'iomap-5.7-merge-3' of git://git./fs/xfs/xfs-linux

Pull iomap fix from Darrick Wong:
"Fix a problem in readahead where we can crash if we can't allocate a
full bio due to GFP_NORETRY"

* tag 'iomap-5.7-merge-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
iomap: Handle memory allocation failure in readahead

Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6

Pull crypto fixes from Herbert Xu:
"This fixes a Kconfig dependency for hisilicon as well as a double free
  in marvell/octeontx"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: marvell/octeontx - fix double free of ptr
  crypto: hisilicon - Fix build error

Merge tag 'linux-watchdog-5.7-rc1' of git://linux-watchdog.org/linux-watchdog

Pull watchdog updates from Wim Van Sebroeck:

- add TI K3 RTI watchdog

- add stop_on_reboot parameter to control reboot policy

- wm831x_wdt: Remove GPIO handling

- several small fixes, improvements and clean-ups

* tag 'linux-watchdog-5.7-rc1' of git://www.linux-watchdog.org/linux-watchdog:
  watchdog: Add K3 RTI watchdog support
  dt-bindings: watchdog: Add support for TI K3 RTI watchdog
  watchdog: ziirave_wdt: change name to be more specific
  watchdog: orion: use 0 for unset heartbeat
  watchdog: npcm: remove whitespaces
  watchdog: reset last_hw_keepalive time at start
  watchdog: imx2_wdt: Drop .remove callback
  watchdog: Add stop_on_reboot parameter to control reboot policy
  watchdog: wm831x_wdt: Remove GPIO handling
  watchdog: imx7ulp: Remove unused include of init.h
  watchdog: imx_sc_wdt: Remove unused includes
  watchdog: qcom: Use irq flags from firmware
  watchdog: pm8916_wdt: Add system sleep callbacks
  watchdog: qcom-wdt: disable pretimeout on timer platform

Merge tag 'tag-chrome-platform-for-v5.7' of git://git./linux/kernel/git/chrome-platform/linux

Pull chrome platform updates from Benson Leung:

  cros-usbpd-notify and cros_ec_typec:
   - Add a new notification driver that handles and dispatches USB PD
     related events to other drivers.
   - Add a Type C connector class driver for cros_ec

  CrOS EC:
   - Introduce a new cros_ec_cmd_xfer_status helper

  Sensors/iio:
   - A series from Gwendal that adds Cros EC sensor hub FIFO support

  Wilco EC:
   - Fix a build warning.
   - Platform data shouldn't include kernel.h

  Misc:
   - i2c api conversion complete, with i2c_new_client_device instead of
     i2c_new_device in chromeos_laptop.
   - Replace zero-length array with flexible-array member in
     cros_ec_chardev and wilco_ec
   - Update new structure for SPI transfer delays in cros_ec_spi

* tag 'tag-chrome-platform-for-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: (34 commits)
  platform/chrome: cros_ec_spi: Wait for USECS, not NSECS
  iio: cros_ec: Use Hertz as unit for sampling frequency
  iio: cros_ec: Report hwfifo_watermark_max
  iio: cros_ec: Expose hwfifo_timeout
  iio: cros_ec: Remove pm function
  iio: cros_ec: Register to cros_ec_sensorhub when EC supports FIFO
  iio: expose iio_device_set_clock
  iio: cros_ec: Move function description to .c file
  platform/chrome: cros_ec_sensorhub: Add median filter
  platform/chrome: cros_ec_sensorhub: Add code to spread timestmap
  platform/chrome: cros_ec_sensorhub: Add FIFO support
  platform/chrome: cros_ec_sensorhub: Add the number of sensors in sensorhub
  platform/chrome: chromeos_laptop: make I2C API conversion complete
  platform/chrome: wilco_ec: event: Replace zero-length array with flexible-array member
  platform/chrome: cros_ec_chardev: Replace zero-length array with flexible-array member
  platform/chrome: cros_ec_typec: Update port info from EC
  platform/chrome: Add Type C connector class driver
  platform/chrome: cros_usbpd_notify: Pull PD_HOST_EVENT status
  platform/chrome: cros_usbpd_notify: Amend ACPI driver to plat
  platform/chrome: cros_usbpd_notify: Add driver data struct
  ...

Merge tag 'libnvdimm-for-5.7' of git://git./linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm and dax updates from Dan Williams:
"There were multiple touches outside of drivers/nvdimm/ this round to
  add cross arch compatibility to the devm_memremap_pages() interface,
  enhance numa information for persistent memory ranges, and add a
  zero_page_range() dax operation.

  This cycle I switched from the patchwork api to Konstantin's b4 script
  for collecting tags (from x86, PowerPC, filesystem, and device-mapper
  folks), and everything looks to have gone ok there. This has all
  appeared in -next with no reported issues.

  Summary:

   - Add support for region alignment configuration and enforcement to
     fix compatibility across architectures and PowerPC page size
     configurations.

   - Introduce 'zero_page_range' as a dax operation. This facilitates
     filesystem-dax operation without a block-device.

   - Introduce phys_to_target_node() to facilitate drivers that want to
     know resulting numa node if a given reserved address range was
     onlined.

   - Advertise a persistence-domain for of_pmem and papr_scm. The
     persistence domain indicates where cpu-store cycles need to reach
     in the platform-memory subsystem before the platform will consider
     them power-fail protected.

   - Promote numa_map_to_online_node() to a cross-kernel generic
     facility.

   - Save x86 numa information to allow for node-id lookups for reserved
     memory ranges, deploy that capability for the e820-pmem driver.

   - Pick up some miscellaneous minor fixes, that missed v5.6-final,
     including a some smatch reports in the ioctl path and some unit
     test compilation fixups.

   - Fixup some flexible-array declarations"

* tag 'libnvdimm-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (29 commits)
  dax: Move mandatory ->zero_page_range() check in alloc_dax()
  dax,iomap: Add helper dax_iomap_zero() to zero a range
  dax: Use new dax zero page method for zeroing a page
  dm,dax: Add dax zero_page_range operation
  s390,dcssblk,dax: Add dax zero_page_range operation to dcssblk driver
  dax, pmem: Add a dax operation zero_page_range
  pmem: Add functions for reading/writing page to/from pmem
  libnvdimm: Update persistence domain value for of_pmem and papr_scm device
  tools/test/nvdimm: Fix out of tree build
  libnvdimm/region: Fix build error
  libnvdimm/region: Replace zero-length array with flexible-array member
  libnvdimm/label: Replace zero-length array with flexible-array member
  ACPI: NFIT: Replace zero-length array with flexible-array member
  libnvdimm/region: Introduce an 'align' attribute
  libnvdimm/region: Introduce NDD_LABELING
  libnvdimm/namespace: Enforce memremap_compat_align()
  libnvdimm/pfn: Prevent raw mode fallback if pfn-infoblock valid
  libnvdimm: Out of bounds read in __nd_ioctl()
  acpi/nfit: improve bounds checking for 'func'
  mm/memremap_pages: Introduce memremap_compat_align()
  ...