drm/amd/display: Programming correct VRR_EN bit in VTEM structure

[Why]
In HDMI plugfest, MTK report our EMP with VRR_EN bit = 0.
VRR_EN bit is EMP-MD0-bit 0. Currently driver set 1 to bit 3.

[How]
Programming correct VRR_EN bit in EMP-MD0-bit0.

Signed-off-by: Hugo Hu <hugo.hu@amd.com>
Reviewed-by: Reza Amini <Reza.Amini@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.22

Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: extend EDID support to 1kb

[why]
There exist displays with EDIDs > 512 bytes, existing code
will cause us to ignore all extension blocks.

Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix DP audio regression

Audio was unmuted for HDMI only, need to do so for DP as well.

Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add a hysteresis to BTR frame multiplier

[Why]
Flickering is observed on some displays when the number of inserted BTR
frames changes frequently.

[How]
Add in a margin of drift to prevent the inserted number of frames from
jumping around too frequently.

Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix DP 422 VID_M half the rate issue.

[Description]
when programming VID_TIMING, we were using the original VESA timing for DP_VIDM/N.
for YCbCr420 or compressed YCbCr422, using half rate as  YCbCr444.

Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix setting DP_VID_N_MUL

[Why]
Need to set VID_N_MUL for 4:2:0 cases

[How]
Move setting to enc1_stream_encoder_dp_unblank and
ensure it is also set for non-4:2:0 cases.

Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Move dm_read_reg_func to dc_helper.

Move out of header to dc_helper.c, in preparation for future
implementations.

Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Use drm helper for resetting plane state

[Why]
To help prevent plane state not being set to the correct default
value if any new properties are added in the future.

[How]
Use the drm helper - which seems to be the common solution among other
DRM drivers.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: change generic_reg_wait to void.

we were only checking the return value in one place, thus changing
generic_reg_wait from int to void and reading the register instead of
getting it from generic_reg_wait, when we need the return value.

Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Reset alpha state for planes to the correct values

[Why]
The plane_reset callback is subclassed but hasn't been updated since
the drm helper got updated to include resetting alpha related state
(state->alpha and state->pixel_blend_mode). The overlay planes
exposed by amdgpu_dm were therefore being rendered as invisible by
default ever since supported was exposed for alpha blending properties
on overlays.

This caused regressions in igt@kms_plane_multiple@atomic-tiling-none
and igt@kms_plane@plane-position-covered-pipe tests.

[How]
Reset the plane state values to their correct values as defined in
the drm helper.

This fixes the IGT test regression.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: use more entries for the first paging queue

To aid recoverable page faults.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: free up the first paging queue v2

We need the first paging queue to handle page faults.

v2: handle any number of SDMA instances gracefully

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: re-enable retry faults

Now that we have re-reoute faults to the other IH
ring we can enable retries again.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd/sriov:Put the pre and post reset in exclusive mode v2

add amdgpu_amdkfd_pre_reset and amdgpu_amdkfd_post_reset inside amdgpu_device_reset_sriov.

Signed-off-by: Wentao Lou <Wentao.Lou@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Respect DRM framebuffer info for video surfaces

[Why]
Incorrect hardcoded assumptions are made regarding luma and chroma
alignment. The actual values set for the DRM framebuffer should be used
when programming the address.

[How]
Respect the given pitch for both luma and chroma planes - it's not like
we can force the alignment to anything else at this point anyway.

Use the FB offset for the chroma planes directly. DRM already
provides this to us so there's no need to calculate it manually.

While we don't actually use the chroma surface size parameters on Raven,
these should have technically been fb->width / 2 and fb->height / 2
since the chroma plane is half size of the luma plane for NV12.

Leave a TODO indicating that those should be set based on the actual
surface format instead since this is only correct for YUV420 formats.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Wait for newly allocated PTs to be idle

When page table are updated by the CPU, synchronize with the
allocation and initialization of newly allocated page tables.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: more descriptive message if HMM not enabled

If using old kernel config file, CONFIG_ZONE_DEVICE is not selected,
so CONFIG_HMM and CONFIG_HMM_MIRROR is not enabled, the current driver
error message "Failed to register MMU notifier" is not clear. Inform
user with more descriptive message on how to fix the missing kernel
config option.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109808

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: support userptr cross VMAs case with HMM

userptr may cross two VMAs if the forked child process (not call exec
after fork) malloc buffer, then free it, and then malloc larger size
buf, kerenl will create new VMA adjacent to old VMA which was cloned
from parent process, some pages of userptr are in the first VMA, the
rest pages are in the second VMA.

HMM expects range only have one VMA, loop over all VMAs in the address
range, create multiple ranges to handle this case. See
is_mergeable_anon_vma in mm/mmap.c for details.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: support concurrent userptr update for HMM

Userptr restore may have concurrent userptr invalidation after
hmm_vma_fault adds the range to the hmm->ranges list, needs call
hmm_vma_range_done to remove the range from hmm->ranges list first,
then reschedule the restore worker. Otherwise hmm_vma_fault will add
same range to the list, this will cause loop in the list because
range->next point to range itself.

Add function untrack_invalid_user_pages to reduce code duplication.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: stop evicting busy PDs/PTs

Otherwise we won't be able to cleanly handle page faults.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: wait for VM to become idle during flush

Make sure that not only the entities are flush, but that
we also wait for the HW to finish all processing.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove non-sense NULL ptr check

It's a bug having a dead pointer in the IDR, silently returning
is the worst we can do.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove chash

Remove the chash implementation for now since it isn't used any more.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: use ring/hash for fault handling on GMC9 v3

Further testing showed that the idea with the chash doesn't work as expected.
Especially we can't predict when we can remove the entries from the hash again.

So replace the chash with a ring buffer/hash mix where entries in the container
age automatically based on their timestamp.

v2: use ring buffer / hash mix
v3: check the timeout to make sure all entries age

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> (v2)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: limit the number of IVs processed at once

Only process a maximum of 32 IVs before writing back the RPTR. This improves
hw handling when we get close to an overflow in the ring buffer.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable IH ring 1&2 for Vega20 as well

That doesn't seem to have any negative effects.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable IH doorbell for ring 1&2 on Vega

The doorbells should already be reserved, just enable them.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: change Vega IH ring 1 config

Disable overflow and enable full drain. This makes fault handling on ring 1
much more reliable since we don't generate back pressure any more.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Only clear dumb buffers if ring is enabled

The buffers should be cleared when possible but we also don't want
buffer creation to fail in the rare case where the ring isn't ready
during the call. This could happen during some suspend/resume sequences.

Cc: Christian König <ckoenig.leichtzumerken@gmail.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Clear VRAM for DRM dumb_create buffers

The dumb_create API isn't intended for high performance rendering
and it's more useful for userspace (ie. IGT) to have them precleared.

The bonus here is that we also won't needlessly leak whatever was
previously in VRAM, but it also probably wasn't sensitive if it was
going through this API.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix semicolon.cocci warnings

drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:405:2-3: Unneeded semicolon
drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:435:2-3: Unneeded semicolon

 Remove unneeded semicolon.

Generated by: scripts/coccinelle/misc/semicolon.cocci

CC: xinhui pan <xinhui.pan@amd.com>
Signed-off-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add new ras workflow control flags

add ras post init function.
Do some initialization after all IP have finished their late init.

Add new member flags which will control the ras work flow.
For now, vbios enable ras for us on boot. That might change in the
future.
So there should be a flag from vbios to tell us if ras is enabled or not
on boot. Looks like there is no such info now.

Other bits of the flags are reserved to control other parts of ras.

Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: let ras initialization a little noticeable

add drm info output if ras initialized successfully.
add ras atomfirmware sanity check.

Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix lockdep warning more gracely

lockdep need a static key.
Previously we set ignore bit to avoid the warning.
Now call sysfs_attr_init to initialize the static key.

Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-and-Tested-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix ras debugfs data parse

Unzero char is accepted by sscanf, so when data is structure but
unexpectedly return error invalid;

Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add new member hw_supported

Currently, it is not clear how ras is supported. Both software and
hardware can set the supported. That is confusing.

Fix it by adding new member hw_supported.

Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix warning when lockdep is enabled

Set ignore bit to satisfy locpdep.

Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix NULL pointer when ta is missing

Ta is optional, so check if ta firmware is loaded or not.

Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix ras parameter descriptions

The descriptions of modinfo wrongly show two parameters
for each feature(see below). This patch can fix this
incorrect outputs.

parm:           amdgpu_ras_enable:Enable RAS features on the GPU (0 = disable, 1 = enable, -1 = auto (default))
parm:           ras_enable:int
parm:           amdgpu_ras_mask:Mask of RAS features to enable (default 0xffffffff), only valid when ras_enable == 1
parm:           ras_mask:uint

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: xinhui pan <xinhui.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: export both supported and enabled ras features

Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: lookup vbios table to check ecc capability

Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: query sram ecc/ecc availability from atombios

query sram ecc capability via amdgpu_atomfirmware_ecc_default_enabled
query ecc availability via amdgpu_atomfirmware_sram_ecc_supported

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add atomfirmware helper function to query sram ecc caps

sram ecc capability could be get from firmware_capability field in firmwareinfo table

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add atomfirmware helper function to query ecc status

ecc default status (enabled or disabled) could be get from umc_config field in umc_info table

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: update atomfirmware header with ecc related members

add new umc_info structures and new firmware_capability defines

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: handle ras resume

Suspend will put irq, so resume need get irq back.
And in the same time, skip other ras initialization.

Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: add RAS ECC event support (v3)

RAS ECC event will combine with GPU reset event, due to
ECC interrupts are caused by uncorrectable error that triggers
GPU reset.

v2: Fix misleading-indentation warning
v3: fix build with CONFIG_HSA_AMD disabled

Signed-off-by: Eric Huang <JinhuiEric.Huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: add RAS capabilities in topology for Vega20 (v2)

It is to collaborate with HSA_CAPABILITY in libhsakmt.

v2: squash in NULL pointer check

Signed-off-by: Eric Huang <JinhuiEric.Huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add human readable debugfs control support (v2)

Currently, the debugfs control node can't parse bash-like commands.
Now add such support for any tester that uses scripts.

v2: squash in fixes for input validation

Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: skip gpu reset when ras error occured

gpu reset is not stable on vega20 A1.

Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add ioctl query for enabled ras features (v2)

Add a query for userspace to check which RAS features
are enabled.

v2: squash in warning fix

Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add a new flag to AMDGPU_CTX_OP_QUERY_STATE2

Add AMDGPU_CTX_QUERY2_FLAGS_RAS_CE/UE which indicate if any error happened
between previous query and this query.

Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable ras on gmc9

Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable ras on gfx9 (v2)

Register ecc interrupts and ecc interrupt handler on gfx9.
Add ras support on gfx9

v2: squash in warning fix

Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable ras on sdma4

register IH, enable ras features on sdma.
create sysfs debugfs file for sdma.

Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Eric Huang <JinhuiEric.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: reserve bad pages during recovery

Mark vram pages with errors as bad and prevent the driver
from using them.

Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add debugfs ctrl node

allow userspace enable/disable ras

Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add amdgpu_ras.c to support ras (v2)

add obj management.
add feature control.
add debugfs infrastructure.
add sysfs infrastructure.
add IH infrastructure.
add recovery infrastructure.

It is a framework. Other IPs need call amdgpu_ras_xxx function instead of
psp_ras_xxx functions.

v2: squash in warning fixes

Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add psp cmd submit timeout

Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add psp v11 ras callback

Add trigger_error and cure_posion.

Acked-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add psp ras subsystem infrastructure (v2)

Add ras fw loading, init, terminate.
Add ras cmd submit helper.
Add ras feature enable/disable common function.

v2: squash in unused variable warning fix

Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add psp ras callback func and macro

Define the driver side interface for ras ta.

Acked-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add ta_ras_if.h

Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add module parameters for ras

Allow RAS feature enable/disable via boot parameter.

Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: export ta fw info

Output the ta fw, aka xgmi/ras, via debugfs.

Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add ta ras fw info (v2)

Add ras fw part, xgmi and ras fw are combined together in ta binary.
Reading the data from the info is not implemented yet.

v2: squash in "drm/amdgpu: fix NULL pointer when ta is missing"

Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: move the smc_if_version to asic file

each asic may be has different smc if version,
so move its to asic file to implement.

Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: simplify sw-smu message map macro

simplify macro of MSG_MAP for sw-smu

Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Cosmetic change for calling func amdgpu_gmc_vram_location

Use function parameter mc as the second parameter of amdgpu_gmc_vram_location,
so codes look more consistent.

Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Christian Konig <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix plane address updates for video surface formats

[Why]
For new DC planes the correct plane address fields are filled based
on whether the plane had a graphics or video format.

However, when we perform stream and plane updates using DC we only ever
fill in the graphics format fields. This causing corruption and hangs
when using video surface formats like NV12 for planes.

[How]
Use the same logic everywhere we update dc_plane_address - always
fill in the correct fields based on the surface format type.

There are 3 places this is done:

- Atomic check, during DC plane creation
- Atomic commit, during plane prepare_fb
- Atomic commit tail, during amdgpu_dm_commit_planes

We use the fill_plane_tiling_attributes in all 3 locations and it
already needs the address to update DCC attributes, so the surface
address update logic can be moved into this helper.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Move IB pool init and fini v2

Problem:
Using SDMA for TLB invalidation in certain ASICs exposed a problem
of IB pool not being ready while SDMA already up on Init and already
shutt down while SDMA still running on Fini. This caused
IB allocation failure. Temproary fix was commited into a
bringup branch but this is the generic fix.

Fix:
Init IB pool rigth after GMC is ready but before SDMA is ready.
Do th opposite for Fini.

v2: Remove restriction on SDMA early init and move amdgpu_ib_pool_fini

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: On DCN1, Wait for vupdate on cursor updates

[Why]
Cursor updates must acquire the pipe control lock to
prevent vupdate from triggering in the middle of cursor
programming. On DCN1 the pipe control lock prevents
pageflips from occurring. This means that a cursor update
right before vupdate can delay a pending pageflip

[How]
If the time until the next vupdate is less than a
conservative estimate of the cursor programming time,
wait until the vupdate has passed before locking.

Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Acked-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add i2c over aux failure handling

[why]
We will not retry when EDID read failure using i2c over aux

[how]
treat i2c over aux failure the same as defer

Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix up reference clock abstractions

[why]
"reference clock" is a very overloaded variable in DC and causes confusion
as there are multiple sources of reference clock, which may be different values
incorrect input values to DML will cause DCHUB to be programmed improperly
and lead to hard to debug underflow issues

[how]
instead of using ref clock everywhere, specify WHICH ref clock:
- xtalin
- dccg refclk
- dchub refclk

these are all distinct values which may not be equal

Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: David Francis <David.Francis@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Expose support for alpha blending on overlays

[Why]
The DRM overlay planes DM exposes support RGBA formats but are currently
forced as fully opaque over whatever they overlay.

[How]
Expose DRM blending mode and alpha properties to userspace.

The overlays exposed support per-pixel pre-multiplied alpha along with
global plane opacity.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add HW i2c arbitration with dmcu

Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: implement bounding box update based on uclk breakdown

[why]
Actual breakdown of DPM level varies by SKU (for the same family)
DC needs some ability to ammend pre-silicon numbers

Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.21

Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: reduce abm min reduction, deviation gain and contrast factor

[Why]
Increased power savings are desired for ABM 2.2.

[How]
Reduce the minimum reduction level, the deviation gain and the contrast factor
to allow for more aggressive operation of the algorithm.

Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Rename is_hdmi to is_hdmi_tmds type

HDMI has TMDS and FRL signal types. Be specific about what is used.

Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add pipe lock during stream update

[why]
Stream update will adjust both info packets and stream params,
need to make sure all things are applied togather.

[how]
add pipe lock during stream update

Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Increase DP blank timeout from 30 ms to 50 ms

[Why]
At 24 Hz, a frame is 41.7 ms, so a 30 ms wait can (and does often)
timeout.

[How]
Bump timeout from 30 ms to 50 ms.

Signed-off-by: Ken Chalmers <ken.chalmers@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Combine field toggle macro and sequence write macro.

[Why]
field toggle write is actual field sequence write with the same
field name.

[How]
Use REG_UPDATE_SEQ_2 for both sequence write and toggle.
Rename REG_UPDATE_1by1_3 to REG_UPDATE_SEQ_3.

Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add PSR SMU Interrupt support

[WHY]
We have new bios capabilities enabling s0i2 entry on SMU interrupt. We want
this interrupt to be fired on PSR transitions such that we enter s0i2
when entering PSR active.

[HOW]
Add code to send the SMU interrupt with the appropriate
staticscreen flag when entering and exting PSR. Protect this
code with a config flag since it currently impacts BL PWM.

Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Acked-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Refactor reg_set and reg_update.

[Why]
Current reg update and reg set use same functions and
only delta is update reads reg value and call update function.

[How]
Refactor reg update and reg set functions.
1.Implement different functions for reg update and reg set.
2.Wrap same process to a help function, both reg update and
reg set will call it.

Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Free DCN version of stream encoder

Cross a TODO item off the list. Cleanup SIGNAL_TYPE_HDMI_FRL, it's
not currently supported.

Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: clean up dml_init_instance

Get rid of DV style dml init in favour of the cleaner DC
style.

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: apply Vega20 BACO workaround

Applied vdci flush workaround for Vega20 BACO.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: XGMI pstate switch initial support

Driver vote low to high pstate switch whenever there is an outstanding
XGMI mapping request. Driver vote high to low pstate when all the
outstanding XGMI mapping is terminated.

Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Enable XGMI mapping for peer device

Adjust vram base offset for XGMI mapping when update the PT entry so
the address will fall into correct XGMI aperture for peer device

Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add sysfs entries  for xgmi hive v2.

For each device a file xgmi_device_id is created.
On the first device a subdirectory named xgmi_hive_info is created,
It contains  a file named hive_id and symlinks named node 1-4 linking
to each device in the hive.

v2: Return error codes instead of '-1' and few misspellings.

Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Don't ASSERT when total_planes == AMDGPU_MAX_PLANES

[Why]
Can happen on ASICs with 6 planes, but this isn't a bug since we haven't
written outside the array.

[How]
Use <= instead of <.

Cc: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reported-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Drop atomic_obj_lock for private obj

[Why]
New DRM versions manage locking for private objects for us, so this
is no longer needed.

This also prevents a WARN_ON from occurring when the private object is
duplicated during the forced atomic commit that occurs from the HPD
handler.

The HPD handler calls drm_modeset_lock_all before the forced commit
and if the private object is duplicated then the
DEBUG_LOCKS_WARN_ON(ww_ctx->done_acquire) warning will be triggered
since we're trying to lock something when everything should have
already been locked.

[How]
Drop the lock and let DRM manage this.

Cc: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: Add ENGINE_CNTL register to vcn10 headers

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: allow huge invalid mappings on GMC8

Only GMC9 supports true huge pages, but we can still free invalid mappings
on GMC8.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: drop the huge page flag

Not needed any more since we now free PDs/PTs on demand.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: free PDs/PTs on demand

When something is unmapped we now free the affected PDs/PTs again.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: allocate VM PDs/PTs on demand

Let's start to allocate VM PDs/PTs on demand instead of pre-allocating
them during mapping.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: let amdgpu_vm_clear_bo figure out ats status v2

Instead of providing it from outside figure out the ats status in the
function itself from the data structures.

v2: simplify finding the right level
v3: partially revert changes from v2, more cleanup and split code
    into more functions.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>