git.monstr.eu Git - linux-2.6-microblaze.git/log

drm/xe/uapi: Expose SIMD16 EU mask in topology query

PVC, Xe2 and later platforms have 16-wide EUs. We were implicitly
reporting for PVC the number of 16-wide EUs without giving userspace any
hint that they were different than for other platforms. Xe2 and later
also have 16-wide, but in those cases the reported number would
correspond to the 8-wide count.

To avoid confusion and make sure the right number is used by userspace
depending on the platform, add a new item to the topology query and drop
the one that is not available. The new mask reported for both PVC and
Xe2 should now match the numbers reported via hwconfig.

v2: Use a different topo item with EU type in its name to report the
new mask instead of adding the type itself as the item (Matt Roper)

Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Jablonski <mateusz.jablonski@intel.com>
Acked-by: Wenbin Lu <wenbin.lu@intel.com>
Acked-by: Effie Yu <effie.yu@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240710220446.2169797-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

drm/xe: Remove unused xe_sync_entry_wait

xe_sync_entry_wait is no longer used, remove it.

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240717140429.1396820-2-matthew.brost@intel.com

drm/xe: Validate user fence during creation

Fail invalid addresses during user fence creation.

Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240717140429.1396820-1-matthew.brost@intel.com

drm/xe/pm: Add trace for pm functions

Add trace for xe pm function for better debuggability.

v2: Fix indentation and add trace for xe_pm_runtime_get_ioctl

Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240717125950.9952-1-nirmoy.das@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>

drm/xe/fbdev: Limit the usage of stolen for LNL+

As per recommendation in the workarounds:
WA_22019338487

There is an issue with accessing Stolen memory pages due a
hardware limitation. Limit the usage of stolen memory for
fbdev for LNL+. Don't use BIOS FB from stolen on LNL+ and
assign the same from system memory.

v2: Corrected the WA Number, limited WA to LNL and
    Adopted XE_WA framework as suggested by Lucas and Matt.

v3: Introduced the waxxx_display to implement display side
    of WA changes on Lunarlake. Used xe_root_mmio_gt and
    avoid the for loop (Suggested by Lucas)

v4: Fixed some nits (Luca)

Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240717082252.3875909-1-uma.shankar@intel.com

drm/xe/xe2: Do not run xe_bo_test for xe2+ dgfx

In xe2+ dgfx, we don't need to handle the copying of ccs
metadata during migration. This test validates the ccs data post
clear and copy during evict/restore operation. Thus, we can skip
this test on xe2+ dgfx.

Signed-off-by: Akshata Jahagirdar <akshata.jahagirdar@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/57d9df82ad02e53c9b0d2a7d40bb27acce57b927.1721250309.git.akshata.jahagirdar@intel.com

drm/xe/migrate: Add kunit to test migration functionality for BMG

This part of kunit verifies that
- main data is decompressed and ccs data is clear post bo eviction.
- main data is raw copied and ccs data is clear post bo restore.

v2: Added missing bo_put()/bo_unlock() (Matt Auld)

Signed-off-by: Akshata Jahagirdar <akshata.jahagirdar@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1d36d4377c566508e42b3fb80d3fe4a588fd00ca.1721250309.git.akshata.jahagirdar@intel.com

drm/xe/xe_migrate: Handle migration logic for xe2+ dgfx

During eviction (vram->sysmem), we use compressed -> uncompressed mapping.
During restore (sysmem->vram), we need to use mapping from
uncompressed -> uncompressed.
Handle logic for selecting the compressed identity map for eviction,
and selecting uncompressed map for restore operations.
v2: Move check of xe_migrate_ccs_emit() before calling
xe_migrate_ccs_copy(). (Nirmoy)

Signed-off-by: Akshata Jahagirdar <akshata.jahagirdar@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/79b3a016e686a662ae68c32b5fc7f0f2ac8043e9.1721250309.git.akshata.jahagirdar@intel.com

drm/xe/xe2: Introduce identity map for compressed pat for vram

Xe2+ has unified compression (exactly one compression mode/format),
where compression is now controlled via PAT at PTE level.
This simplifies KMD operations, as it can now decompress freely
without concern for the buffer's original compression format—unlike DG2,
which had multiple compression formats and thus required copying the
raw CCS state during VRAM eviction. In addition mixed VRAM and system
memory buffers were not supported with compression enabled.

On Xe2 dGPU compression is still only supported with VRAM, however we
can now support compression with VRAM and system memory buffers,
with GPU access being seamless underneath. So long as when doing
VRAM -> system memory the KMD uses compressed -> uncompressed,
to decompress it. This also allows CPU access to such buffers,
assuming that userspace first decompress the corresponding
pages being accessed.
If the pages are already in system memory then KMD would have already
decompressed them. When restoring such buffers with sysmem -> VRAM
the KMD can't easily know which pages were originally compressed,
so we always use uncompressed -> uncompressed here.
With this it also means we can drop all the raw CCS handling on such
platforms (including needing to allocate extra CCS storage).

In order to support this we now need to have two different identity
mappings for compressed and uncompressed VRAM.
In this patch, we set up the additional identity map for the VRAM with
compressed pat_index. We then select the appropriate mapping during
migration/clear. During eviction (vram->sysmem), we use the mapping
from compressed -> uncompressed. During restore (sysmem->vram), we need
the mapping from uncompressed -> uncompressed.
Therefore, we need to have two different mappings for compressed and
uncompressed vram. We set up an additional identity map for the vram
with compressed pat_index.
We then select the appropriate mapping during migration/clear.

v2: Formatting nits, Updated code to match recent changes in
xe_migrate_prepare_vm(). (Matt)

v3: Move identity map loop to a helper function. (Matt Brost)

v4: Split helper function in different patch, and
add asserts and nits. (Matt Brost)

v5: Convert the 2 bool arguments of pte_update_size to flags
argument (Matt Brost)

v6: Formatting nits (Matt Brost)

Signed-off-by: Akshata Jahagirdar <akshata.jahagirdar@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b00db5c7267e54260cb6183ba24b15c1e6ae52a3.1721250309.git.akshata.jahagirdar@intel.com

drm/xe/migrate: Add helper function to program identity map

Add an helper function to program identity map.

v2: Formatting nits

Signed-off-by: Akshata Jahagirdar <akshata.jahagirdar@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/91dc05f05bd33076fb9a9f74f8495b48d2abff53.1721250309.git.akshata.jahagirdar@intel.com

drm/xe/migrate: Add kunit to test clear functionality

This test verifies if the main and ccs data are cleared during bo creation.
The motivation to use Kunit instead of IGT is that, although we can verify
whether the data is zero following bo creation,
we cannot confirm whether the zero value after bo creation is the result of
our clear function or simply because the initial data present was zero.

v2: Updated the mutex_lock and unlock logic,
Changed out_unlock to out_put. (Matt)

v3: Added missing dma_fence_put(). (Nirmoy)

v4: Rebase.

v5: Add missing bo_put(), bo_unlock() calls. (Matt Auld)

Signed-off-by: Akshata Jahagirdar <akshata.jahagirdar@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c07603439b88cfc99e78c0e2069327e65d5aa87d.1721250309.git.akshata.jahagirdar@intel.com

drm/xe/migrate: Handle clear ccs logic for xe2 dgfx

For Xe2 dGPU, we clear the bo by modifying the VRAM using an
uncompressed pat index which then indirectly updates the
compression status as uncompressed i.e zeroed CCS.
So xe_migrate_clear() should be updated for BMG to not
emit CCS surf copy commands.

v2: Moved xe_device_needs_ccs_emit() to xe_migrate.c and changed
name to xe_migrate_needs_ccs_emit() since its very specific to
migration.(Matt)

Signed-off-by: Akshata Jahagirdar <akshata.jahagirdar@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8dd869dd8dda5e17ace28c04f1a48675f5540874.1721250309.git.akshata.jahagirdar@intel.com

drm/xe: Don't suspend device upon wedge

When wedging a device we shouldn't be suspending device as state for
debug will be lost.

Also this appears to not work as the below stack trace pops upon trying
to resume a wedged device:

[  304.245044] INFO: task cat:12115 blocked for more than 151 seconds.
[  304.251333]       Tainted: G        W          6.10.0-rc7-xe+ #3518
[  304.257617] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  304.265459] task:cat             state:D stack:13384 pid:12115 tgid:12115 ppid:3986   flags:0x00000006
[  304.265465] Call Trace:
[  304.265467]  <TASK>
[  304.265469]  __schedule+0x3c4/0xdf0
[  304.265478]  schedule+0x3c/0x140
[  304.265481]  rpm_resume+0x1cc/0x740
[  304.265484]  ? __pfx_autoremove_wake_function+0x10/0x10
[  304.265489]  __pm_runtime_resume+0x49/0x80
[  304.265494]  guc_info+0x6b/0xb0 [xe]
[  304.265538]  ? __pfx___drm_printfn_seq_file+0x10/0x10
[  304.265541]  ? __pfx___drm_puts_seq_file+0x10/0x10
[  304.265545]  seq_read_iter+0x111/0x4c0
[  304.265551]  seq_read+0xfc/0x140
[  304.265556]  full_proxy_read+0x58/0x80
[  304.265560]  vfs_read+0xa7/0x360
[  304.265563]  ? find_held_lock+0x2b/0x80
[  304.265568]  ksys_read+0x64/0xe0
[  304.265571]  do_syscall_64+0x68/0x140
[  304.265575]  entry_SYSCALL_64_after_hwframe+0x76/0x7e
[  304.265578] RIP: 0033:0x7f4254d14992
[  304.265580] RSP: 002b:00007ffc558666f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[  304.265583] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f4254d14992
[  304.265584] RDX: 0000000000020000 RSI: 00007f4254ebb000 RDI: 0000000000000003
[  304.265586] RBP: 00007f4254ebb000 R08: 00007f4254eba010 R09: 00007f4254eba010
[  304.265587] R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000022000
[  304.265588] R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000
[  304.265593]  </TASK>
[  304.265594]
               Showing all locks held in the system:
[  304.265598] 1 lock held by khungtaskd/57:
[  304.265599]  #0: ffffffff8273b860 (rcu_read_lock){....}-{1:2}, at: debug_show_all_locks+0x36/0x1c0
[  304.265607] 3 locks held by kworker/6:1/90:
[  304.265610] 1 lock held by in:imklog/547:
[  304.265611]  #0: ffff88810498cd88 (&f->f_pos_lock){+.+.}-{3:3}, at: __fdget_pos+0x76/0xc0
[  304.265620] 1 lock held by dmesg/1310:

v2: Drop local 'err' variable (Jonathan)

Fixes: 8ed9aaae39f3 ("drm/xe: Force wedged state and block GT reset upon any GPU hang")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240716063902.1390130-2-matthew.brost@intel.com

drm/xe: Wedge the entire device

Wedge the entire device, not just GT which may have triggered the wedge.
To implement this, cleanup the layering so xe_device_declare_wedged()
calls into the lower layers (GT) to ensure entire device is wedged.

While we are here, also signal any pending GT TLB invalidations upon
wedging device.

Lastly, short circuit reset wait if device is wedged.

v2:
- Short circuit reset wait if device is wedged (Local testing)

Fixes: 8ed9aaae39f3 ("drm/xe: Force wedged state and block GT reset upon any GPU hang")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240716063902.1390130-1-matthew.brost@intel.com

drm/xe/gsc: add Battlemage support

Add heci_cscfi support bit for new CSC engine type.
It has same mmio offsets as DG2 GSC but separate interrupt flow.

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240708084906.2827024-1-alexander.usyskin@intel.com

drm/xe/vf: Track writes to inaccessible registers from VF

Only limited set of registers is accessible for the VF driver and
the hardware will silently drop writes to inaccessible registers.
To improve our VF driver lets intercept all such writes to warn
about such unexpected writes on debug builds or optionally allow
to provide some substitution (as a potential future extension).

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Cc: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240713142643.1242-2-michal.wajdeczko@intel.com

drm/xe/xe2: Add Wa_15015404425

Wa_15015404425 asks us to perform four "dummy" writes to a
non-existent register offset before every real register read.
Although the specific offset of the writes doesn't directly
matter, the workaround suggests offset 0x130030 as a good target
so that these writes will be easy to recognize and filter out in
debugging traces.

V5(MattR):
  - Avoid negating an equality comparison
V4(MattR):
  - Use writel and remove xe_reg usage
V3(MattR):
  - Define dummy reg local to function
  - Avoid tracing dummy writes
  - Update commit message
V2:
  - Add WA to 8/16/32bit reads also - MattR
  - Corrected dummy reg address - MattR
  - Use for loop to avoid mental pause - JaniN

Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240709155606.2998941-1-tejas.upadhyay@intel.com

drm/xe/pf: Limit fair VF LMEM provisioning

Due to the current design of the BO and VRAM manager, any object
with XE_BO_FLAG_PINNED flag, which the PF driver uses during VF
LMEM provisionining, is created with the TTM_PL_FLAG_CONTIGUOUS
flag, which may cause VRAM fragmentation that prevents subsequent
allocations of larger objects, like fair VF LMEM provisioning.

To avoid such failures, round down fair VF LMEM provisioning size
to next power of two size, to compensate what xe_ttm_vram_mgr is
doing to achieve contiguous allocations.

Fixes: ac6598aed1b3 ("drm/xe/pf: Add support to configure SR-IOV VFs")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240711192320.1198-2-michal.wajdeczko@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

drm/xe/exec: Fix minor bug related to xe_sync_entry_cleanup

Increment num_syncs after xe_sync_entry_parse() is successful to ensure
the xe_sync_entry_cleanup() logic under "err_syncs" label works correctly.

v2: Use the same pattern as that in xe_vm.c (Matt Brost)

Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240711211203.3728180-1-ashutosh.dixit@intel.com

drm/xe/kunit: Simplify xe_mocs live tests code layout

The test case logic is implemented by the functions compiled as
part of the core Xe driver module and then exported to build and
register the test suite in the live test module.

But we don't need to export individual test case functions, we may
just export the entire test suite. And we don't need to register
this test suite in a separate file, it can be done in the main
file of the live test module.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240708111210.1154-5-michal.wajdeczko@intel.com

drm/xe/kunit: Simplify xe_migrate live tests code layout

The test case logic is implemented by the functions compiled as
part of the core Xe driver module and then exported to build and
register the test suite in the live test module.

But we don't need to export individual test case functions, we may
just export the entire test suite. And we don't need to register
this test suite in a separate file, it can be done in the main
file of the live test module.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240708111210.1154-4-michal.wajdeczko@intel.com

drm/xe/kunit: Simplify xe_dma_buf live tests code layout

The test case logic is implemented by the functions compiled as
part of the core Xe driver module and then exported to build and
register the test suite in the live test module.

But we don't need to export individual test case functions, we may
just export the entire test suite. And we don't need to register
this test suite in a separate file, it can be done in the main
file of the live test module.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240708111210.1154-3-michal.wajdeczko@intel.com

drm/xe/kunit: Simplify xe_bo live tests code layout

The test case logic is implemented by the functions compiled as
part of the core Xe driver module and then exported to build and
register the test suite in the live test module.

But we don't need to export individual test case functions, we may
just export the entire test suite. And we don't need to register
this test suite in a separate file, it can be done in the main
file of the live test module.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240708111210.1154-2-michal.wajdeczko@intel.com

drm/xe/kunit: Drop XE_TEST_EXPORT

It's unused and can be replaced with VISIBLE_IF_KUNIT if needed.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240705191057.1110-3-michal.wajdeczko@intel.com

drm/xe/kunit: Kill xe_cur_kunit()

We shouldn't use custom helper if there is a official one.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240705191057.1110-2-michal.wajdeczko@intel.com

drm/xe: Add process name and PID to job timedout message

This will be very helpful for Mesa CI, where it uses PID to match
the exacly test that cause timedout/GPU hang and mark that test as
failing.

Also printing the process name as it might be relavant for human
readers.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240710213149.57662-1-jose.souza@intel.com

drm/xe/xe2: Make subsequent L2 flush sequential

Issuing the flush on top of an ongoing flush is not desirable.
Lets use lock to make it sequential.

Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240710052750.3031586-1-tejas.upadhyay@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>

drm/xe/display/xe_hdcp_gsc: Free arbiter on driver removal

Free arbiter allocated in intel_hdcp_gsc_init().

Fixes: 152f2df954d8 ("drm/xe/hdcp: Enable HDCP for XE")
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Arun R Murthy <arun.r.murthy@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240708125918.23573-1-nirmoy.das@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>

drm/xe: Generate oob before compiling anything

Instead of keep adding more dependencies as WAs are needed in different
places of the driver, just add a rule with all the objects so the code
generation happens before anything else.

While at it, group lines related to wa_oob in the Makefile.

v2: Prefix $(obj) when declaring dependency

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240708213041.1734028-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

drm/xe/gt: Remove double include

The header generated/xe_wa_oob.h is included twice. Remove one.

Fixes: 01570b446939 ("drm/xe/bmg: implement Wa_16023588340")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/r/202407052122.AzuWSPuo-lkp@intel.com/
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240708173301.1543871-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

drm/xe/xe2lpg: Extend workaround 14021402888

workaround 14021402888 also applies to Xe2_LPG.
Replicate the existing entry to one specific for Xe2_LPG.

Signed-off-by: Bommu Krishnaiah <krishnaiah.bommu@intel.com>
Cc: Tejas Upadhyay <tejas.upadhyay@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240703090754.1323647-1-krishnaiah.bommu@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

drm/xe: Drop trace_xe_hw_fence_free

fence->ctx may be stale memory when trace_xe_hw_fence_free is called
resuling UAF bug when deriving the device name. This tracepoint is not
all that useful, so just drop it.

Fixes: 501c4255c409 ("drm/xe/trace: Print device_id in xe_trace events")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240708211008.956384-1-matthew.brost@intel.com

drm/xe/xe2lpm: Extend Wa_16021639441

Wa_16021639441 applies to Xe2_LPM.

Signed-off-by: Ngai-Mint Kwan <ngai-mint.kwan@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240701184637.531794-1-ngai-mint.kwan@linux.intel.com

drm/xe: Use write-back caching mode for system memory on DGFX

The caching mode for buffer objects with VRAM as a possible
placement was forced to write-combined, regardless of placement.

However, write-combined system memory is expensive to allocate and
even though it is pooled, the pool is expensive to shrink, since
it involves global CPU TLB flushes.

Moreover write-combined system memory from TTM is only reliably
available on x86 and DGFX doesn't have an x86 restriction.

So regardless of the cpu caching mode selected for a bo,
internally use write-back caching mode for system memory on DGFX.

Coherency is maintained, but user-space clients may perceive a
difference in cpu access speeds.

v2:
- Update RB- and Ack tags.
- Rephrase wording in xe_drm.h (Matt Roper)
v3:
- Really rephrase wording.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Fixes: 622f709ca629 ("drm/xe/uapi: Add support for CPU caching mode")
Cc: Pallavi Mishra <pallavi.mishra@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Effie Yu <effie.yu@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Jose Souza <jose.souza@intel.com>
Cc: Michal Mrozek <michal.mrozek@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Acked-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Fixes: 622f709ca629 ("drm/xe/uapi: Add support for CPU caching mode")
Acked-by: Michal Mrozek <michal.mrozek@intel.com>
Acked-by: Effie Yu <effie.yu@intel.com> #On chat
Link: https://patchwork.freedesktop.org/patch/msgid/20240705132828.27714-1-thomas.hellstrom@linux.intel.com

drm/i915: disable fbc due to Wa_16023588340

On BMG-G21 we need to disable fbc due to complications around the WA.

v2:
- Try to handle with i915_drv.h and compat layer. (Rodrigo)
v3:
- For simplicity retreat back to the original design for now.
- Drop the extra \ from the Makefile (Jani)

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Vinod Govindapillai <vinod.govindapillai@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240703124338.208220-4-matthew.auld@intel.com

drm/xe/bmg: implement Wa_16023588340

This involves enabling l2 caching of host side memory access to VRAM
through the CPU BAR. The main fallout here is with display since VRAM
writes from CPU can now be cached in GPU l2, and display is never
coherent with caches, so needs various manual flushing. In the case of
fbc we disable it due to complications in getting this to work
correctly (in a later patch).

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240703124338.208220-3-matthew.auld@intel.com

drm/xe: Use VF_CAP_REG for device wmb

To force a write barrier on the device memory, we write to the
SOFTWARE_FLAGS_SPR33 register, but this particular register was
selected because it was one of the writable and unused register.

Since a write barrier should also work if we use the read-only
register, switch to VF_CAP_REG register that is also marked as
accessible for VFs.

While at it, add simple kernel-doc for xe_device_wmb() function.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240702183704.1022-4-michal.wajdeczko@intel.com

drm/xe: Kill regs/xe_sriov_regs.h

There is no real benefit to maintain a separate file. The register
definitions related to SR-IOV can be placed in existing headers.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240702183704.1022-3-michal.wajdeczko@intel.com

drm/xe: Fix register definition order in xe_regs.h

Swap XEHP_CLOCK_GATE_DIS(0x101014) with GU_DEBUG(x101018).

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240702183704.1022-2-michal.wajdeczko@intel.com

drm/xe: Add VM bind IOCTL error injection

Add VM bind IOCTL error injection which steals MSB of the bind flags
field which if set injects errors at various points in the VM bind
IOCTL. Intended to validate error paths. Enabled by CONFIG_DRM_XE_DEBUG.

v4:
- Change define layout (Jonathan)

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240704041652.272920-8-matthew.brost@intel.com

drm/xe: Update PT layer with better error handling

Update PT layer so if a memory allocation for a PTE fails the error can
be propagated to the user without requiring the VM to be killed.

v5:
- change return value invalidation_fence_init to void (Matthew Auld)
v7:
- Invert i,j usage in two places (Matthew Auld)
- s/0/NULL (Matthew Auld)
- Don't ignore return value of xe_pt_new_shared (Matthew Auld)
- Don't check for NULL in xe_pt_entry (Matthew Auld)

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240704041652.272920-7-matthew.brost@intel.com

drm/xe: Update VM trace events

The trace events have changed moving to a single job per VM bind IOCTL,
update the trace events align with old behavior as much as possible.

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240704041652.272920-6-matthew.brost@intel.com

drm/xe: Convert multiple bind ops into single job

This aligns with the uAPI of an array of binds or single bind that
results in multiple GPUVA ops to be considered a single atomic
operations.

The design is roughly:
- xe_vma_ops is a list of xe_vma_op (GPUVA op)
- each xe_vma_op resolves to 0-3 PT ops
- xe_vma_ops creates a single job
- if at any point during binding a failure occurs, xe_vma_ops contains
the information necessary unwind the PT and VMA (GPUVA) state

v2:
- add missing dma-resv slot reservation (CI, testing)
v4:
- Fix TLB invalidation (Paulo)
- Add missing xe_sched_job_last_fence_add/test_dep check (Inspection)
v5:
- Invert i, j usage (Matthew Auld)
- Add helper to test and add job dep (Matthew Auld)
- Return on anything but -ETIME for cpu bind (Matthew Auld)
- Return -ENOBUFS if suballoc of BB fails due to size (Matthew Auld)
- s/do/Do (Matthew Auld)
- Add missing comma (Matthew Auld)
- Do not assign return value to xe_range_fence_insert (Matthew Auld)
v6:
- s/0x1ff/MAX_PTE_PER_SDI (Matthew Auld, CI)
- Check to large of SA in Xe to avoid triggering WARN (Matthew Auld)
- Fix checkpatch issues
v7:
- Rebase
- Support more than 510 PTEs updates in a bind job (Paulo, mesa testing)
v8:
- Rebase

Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240704041652.272920-5-matthew.brost@intel.com

drm/xe: Add xe_exec_queue_last_fence_test_dep

Helpful to determine if a bind can immediately use CPU or needs to be
deferred a drm scheduler job.

v7:
- Better wording in kernel doc (Matthew Auld)

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240704041652.272920-4-matthew.brost@intel.com

drm/xe: Add xe_vm_pgtable_update_op to xe_vma_ops

Each xe_vma_op resolves to 0-3 pt_ops. Add storage for the pt_ops to
xe_vma_ops which is dynamically allocated based the number and types of
xe_vma_op in the xe_vma_ops list. Allocation only implemented in this
patch.

This will help with converting xe_vma_ops (multiple xe_vma_op) in a
atomic update unit.

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240704041652.272920-3-matthew.brost@intel.com

drm/xe: s/xe_tile_migrate_engine/xe_tile_migrate_exec_queue

Engine is old nomenclature, replace with exec queue.

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240704041652.272920-2-matthew.brost@intel.com

drm/xe/uapi: Rename xe perf layer as xe observation layer

In Xe, the perf layer allows capture of HW counter streams. These HW
counters are generally performance related but don't have to be necessarily
so. Also, the name "perf" is a carryover from i915 and is not preferred.

Here we propose the name "observation" for this common layer which allows
capture of different types of these counter streams.

v2: Rename observability layer to observation layer (Lucas/Rodrigo)
v3: Rename sysctl file to "observation_paranoid" (Jose)

Fixes: 52c2e956dceb ("drm/xe/perf/uapi: "Perf" layer to support multiple perf counter stream types")
Fixes: fe8929bdf835 ("drm/xe/perf/uapi: Add perf_stream_paranoid sysctl")
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240703164801.2561423-1-ashutosh.dixit@intel.com

drm/xe: Add timeout to preempt fences

To adhere to dma fencing rules that fences must signal within a
reasonable amount of time, add a 5 second timeout to preempt fences. If
this timeout occurs, kill the associated VM as this fatal to the VM.

v2:
- Add comment for smp_wmb (Checkpatch)
- Fix kernel doc typo (Inspection)
- Add comment for killed check (Niranjana)
v3:
- Drop smp_wmb (Matthew Auld)
- Don't take vm->lock in preempt fence worker (Matthew Auld)
- Drop RB given changes to patch
v4:
- Add WRITE/READ_ONCE (Niranjana)
- Don't export xe_vm_kill (Niranjana)

Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Tested-by: Stuart Summers <stuart.summers@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240626004137.4060806-1-matthew.brost@intel.com

drm/xe/guc: Demote GuC IDs usage message to debug

Printing message at INFO level about available GuC IDs is not that
important, DEBUG level is enough. It will also match message about
available doorbells:

[ ] xe ... [drm:xe_guc_id_mgr_init [xe]] GT0: using 65535 GuC IDs
[ ] xe ... [drm:xe_guc_db_mgr_init [xe]] GT0: using 256 doorbells

While at it, use proper "GuC" name.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240701193030.978-1-michal.wajdeczko@intel.com

drm/xe/bmg: Apply Wa_22019338487

Extend this WA to BMG GT as well. In this case media GT is
not affected. The cap frequencies and max allowed ggtt writes
are different as well. On BMG, we need to do a flush after 1100
GGTT writes, and we need to limit the GT frequency request
to 2133 Mhz during driver load and leave it at that value after
driver unloads.

v3: Fix checkpatch issue

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240701231529.2582452-2-vinay.belgaumkar@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/guc: Prevent use of uninitialized mutex

When skip_guc_pc is set and/or this is for a VF.

Fixes: 3b1592fb7835 ("drm/xe/lnl: Apply Wa_22019338487")
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240701231529.2582452-1-vinay.belgaumkar@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/oa: Destroy the stream_lock mutex

The mutex allocated in xe_oa_stream_init() was never previously
destroyed. Do so now.

Fixes: e936f885f1e9 ("drm/xe/oa/uapi: Expose OA stream fd")
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240628052125.1847989-1-ashutosh.dixit@intel.com

drm/xe/rtp: Fix out-of-bounds array access

Increment the counter before checking for number of rules, otherwise
when there's no XE_RTP_MATCH_OR an out-of-bounds access is done, as
reported by kasan:

BUG: KASAN: global-out-of-bounds in rule_matches+0xb6d/0x11c0 [xe]
Read of size 1 at addr ffffffffa0a50b70 by task systemd-udevd/243

Fixes: dc72c52a42e0 ("drm/xe/rtp: Allow to OR rules")
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240628161726.836734-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

drm/xe/pf: Restart VFs provisioning after GT reset

Any prior configurations pushed to the GuC are lost when the GT
is reset. Push again all non-empty VF configurations to the GuC
as part of the GuC reset procedure.

This will also help restore early manual provisioning, when the
PF was in the meantime suspended and then resumed.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240701102738.934-3-michal.wajdeczko@intel.com

drm/xe/pf: Skip fair VFs provisioning if already provisioned

Our debugfs allows to view and change VFs' provisioning configs.

If we attempt to experiment with VFs provisioning before enabling
them, this early config will affect fair provisioning calculations,
and will also be overwritten, which is undesirable behavior.

To improve this, check if the VFs configs are empty (unprovisioned)
before starting the fair provisioning procedure.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240701102738.934-2-michal.wajdeczko@intel.com

drm/xe/pf: Remove inlined #ifdef CONFIG_PCI_IOV

We can remove #ifdef CONFIG_PCI_IOV in .c files if we provide
dummy replacement of the xe_pci_sriov_configure() function.

Suggested-by: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240627104305.1477-1-michal.wajdeczko@intel.com

drm/xe/guc: Configure TLB timeout based on CT buffer size

GuC TLB invalidation depends on GuC to process the request from the CT
queue and then the real time to invalidate TLB. Add a function to return
overestimated possible time a TLB inval H2G might take which can be used
as timeout value for TLB invalidation wait time.

v4: Make sure CTB is in 4K blocks(Michal) and other doc fixes
v3: Pass CT to xe_guc_ct_queue_proc_time_jiffies() (Michal)
Add tlb_timeout_jiffies() that replaces TLB_TIMEOUT(Michal)
v2: Address reviews from Michal.

Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1622
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Suggested-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Acked-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240628085845.2369-1-nirmoy.das@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>

drm/xe/mcr: Avoid clobbering DSS steering

A couple copy/paste mistakes in the code that selects steering targets
for OADDRM and INSTANCE0 unintentionally clobbered the steering target
for DSS ranges in some cases.

The OADDRM/INSTANCE0 values were also not assigned as intended, although
that mistake wound up being harmless since the desired values for those
specific ranges were '0' which the kzalloc of the GT structure should
have already taken care of implicitly.

Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240626210536.1620176-2-matthew.d.roper@intel.com

drm/xe/mocs: Clarify difference between hw and sw sizes

It's not very obvious what the difference is between the 'size' and
'n_entries' fields of the MOCS structure. Rename both fields slightly
and add some comments explaining that one is the documentation-defined
table size, while the other is the number of entries that can be
programmed into the hardware (and the documented table size can
potentially be smaller than the number of hardware entries).

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240627203741.2042752-4-matthew.d.roper@intel.com

drm/xe/mocs: Update MOCS assertions and remove redundant checks

Rely more heavily on assertions to describe the MOCS programming
invariants. CI checks these assertions and will ensure no violations
sneak in due to programmer error, so we can remove some of the redundant
WARN and silent return checks from non-debug builds.

Also tweak/augment some of the existing assertions: there's no reason
we'd ever want a platform not to have a MOCS 'ops' structure hooked up
so ensure info->ops is non-NULL. Likewise, we should never have a case
where the bspec-defined MOCS setting table is larger than the number of
MOCS registers exposed by the hardware, so add an extra assert on those
sizes as well.

Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240627203741.2042752-3-matthew.d.roper@intel.com

drm/xe: Get hwe domain specific FW to read RING_TIMESTAMP

Per client engine utilization uses RING_TIMESTAMP to return
drm-total-cycles to the user. Current code uses XE_FW_GT to read this
register on the first available engine in a GT. When testing on DG2, it
is observed that this value is 0 when running test on some engines. To
resolve that, get the hwe domain specific FW for reading the engine
timestamp.

v2:
- update commit message
- use domain specific FW (Matt)

v3:
- Drop check for hwe in the helper (Matt, Michal)

v4:
- checkpatch fixes

v5: Rebase

Fixes: 188ced1e0ff8 ("drm/xe/client: Print runtime to fdinfo")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240627235105.2631135-1-umesh.nerlige.ramappa@intel.com

drm/xe/client: Check return value of xe_force_wake_get

xe_force_wake_get() can return error so check it's return value
before reading gpu_timestamp value.

v2: set HWE to NULL instead of setting timestamp to 0(Lucas)
Add a warn on for xe_force_wake_put(Himal)

Fixes: 188ced1e0ff8 ("drm/xe/client: Print runtime to fdinfo")
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240625094228.5327-1-nirmoy.das@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

drm/xe/hwmon: Remove xe_hwmon_process_reg

Remove xe_hwmon_process_reg as it is a umbrella function which can be
avoided (Lucas).

v2: Improve commit message. (Badal)

v3: Add couple of comments. (Lucas)

Signed-off-by: Karthik Poosa <karthik.poosa@intel.com>
Suggested-by: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Badal Nilawar <badal.nilawar@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240626170746.2926011-2-karthik.poosa@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

drm/xe: fix error handling in xe_migrate_update_pgtables

Don't call drm_suballoc_free with sa_bo pointing to PTR_ERR.

References: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2120
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240620102025.127699-2-matthew.auld@intel.com

drm/xe/oa/uapi: Allow preemption to be disabled on the stream exec queue

Mesa VK_KHR_performance_query use case requires preemption and timeslicing
to be disabled for the stream exec queue. Implement this functionality
here.

v2: Minor change to debug print to print both ret values (Umesh)

Acked-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240626181817.1516229-3-ashutosh.dixit@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/oa: Allow stream enable/disable functions to return error

Stream enable/disable functions previously had void return because failure
during function execution was not possible. This will change when we
introduce functionality to disable preemption on the stream exec
queue. Therefore, in preparation for this functionality, prepare this code
to be able to handle error returns.

Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240626181817.1516229-2-ashutosh.dixit@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/pf: Disable VFs on remove

We shouldn't leave VFs enabled when unloading the PF driver.
Otherwise we will get a message like:

[ ] xe 0000:4d:00.0: driver left SR-IOV enabled after remove

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240626111827.1389-2-michal.wajdeczko@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/irq: remove xe_irq_shutdown

The cleanup is done by devres in irq_uninstall.

Commit bbc9651fe9f4 ("drm/xe/irq: move irq_uninstall over to devm")
resolved the ordering issue where irq_uninstall (registered with drmm)
was called after pci_free_irq_vectors (registered with devm upon calling
pci_alloc_irq_vectors). This happened because drmm action list is
registered with devm very early in the init flow - before
pci_alloc_irq_vectors.

Now that irq_uninstall is registered with devm, it will be called before
pci_free_irq_vectors and we can remove xe_irq_shutdown.

Signed-off-by: Ilia Levi <illevi@habana.ai>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240606124705.822451-1-illevi@habana.ai
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/pf: Trigger explicit FLR while disabling VFs

We attempt to unprovision all VFs GuC when disabling them, but
GuC may reject such request if the target VF was previously active
but VF driver didn't unload with explicit VF reset H2G action or
the VMM has not started the VF FLR.

To avoid mismatches between configs maintained the PF and GuC,
trigger an explicit FLR sequences just before releasing resources.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240625194546.1301-2-michal.wajdeczko@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/guc: Print GuC error codes as hex value

We maintain GuC error code values in hex format. Also print them
in that format for easier matching.

While at it, slightly reformat the log and add missing \n.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240625141258.1257-4-michal.wajdeczko@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/guc: Add more GuC error codes to ABI

There are many more error codes used that the GuC firmware can
return in the RESPONSE_FAILURE message. Add to the ABI header
those which are more likely to be seen by the PF or VF drivers.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240625141258.1257-3-michal.wajdeczko@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/guc: Demote the H2G retry log message to debug

The G2H RETRY message sent by the GuC does not necessary indicate
any serious problem and can be a part of the normal communication
flow. Switch the log level from warning to more appropriate debug.
This will also let the CI ignore these logs which were seen in few
SR-IOV scenarios.

While at it, use hex to print the reason and add missing \n.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240625141258.1257-2-michal.wajdeczko@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/vf: Skip attempt to start GuC PC if VF

We have already marked the GuC PC feature as not applicable for
VF devices, but we missed the fact that there may be still some
privileged activities performed by this component, who does much
more than its name suggests.

Explicitly skip xe_guc_pc_start() if running as a VF driver and
use a GT oriented message to report any error.

v2: also skip xe_guc_pc_stop (Vinay)

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240622094253.1081-1-michal.wajdeczko@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/oa: Fix kernel doc in xe_drm.h

Fix kernel doc in xe_drm.h. Also eliminate private/non-abi enum
definitions.

v2: Remove __DRM_XE_PERF_TYPE_MAX since it is unused (Michal)
v3: Also remove DRM_XE_OA_PROPERTY_MAX since it can also be
eliminated (Michal)

Suggested-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240623203119.3840283-1-ashutosh.dixit@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/huc: Use GT oriented error messages in xe_huc.c

If applicable, we prefer GT oriented dmesg messages. Update all
HuC related messages and use more user friendly error codes.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240621172522.1037-1-michal.wajdeczko@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/guc: Request max GT freq during resume

We already request max freq in the load path, moving it
to __xe_guc_upload will ensure this speeds up GuC load in
the resume path as well.

v2: Rename xe_guc_pc_init_early since we now call it per
GuC load (Michal W)

v3: Keep pc_init_early() and init RPx values there (Rodrigo)

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240620224928.3986377-3-vinay.belgaumkar@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/lnl: Apply Wa_22019338487

This WA requires us to limit media GT frequency requests to a certain
cap value during driver load. Freq limits are restored after load
completes, so perf will not be affected during normal operations.

During normal driver operation, this WA requires dummy writes to media
offset 0x380D8C after every ~63 GGTT writes. This will ensure completion
of the LMEM writes originating from Gunit.

During driver unload(before FLR), the WA requires that we set requested
frequency to the cap value again.

v3: Do not use WA number in function name. Call WA wrapper from xe_device.
Rename some variables, check for locks in the correct function (Rodrigo).
Ensure reset path is also covered for this WA.

v4: Fix BAT failure

v5: Add a function pointer for ggtt_ops (Michal W)

v6: Fix name collision and use static function (Rodrigo)

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240620224928.3986377-2-vinay.belgaumkar@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-xe-next

Need to sync some header include that propagated through
drm-intel-next.

v2: After some changes in drm/drm-next

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

agp: add missing MODULE_DESCRIPTION() macros

make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/agp/amd64-agp.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/agp/intel-agp.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/agp/intel-gtt.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/agp/sis-agp.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/agp/via-agp.o

Add the missing invocations of the MODULE_DESCRIPTION() macro.

Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240603-md-agp-v1-1-9a1582114ced@quicinc.com

Merge tag 'drm-intel-next-2024-06-19' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-next

drm/i915 feature pull for v6.11:

Features and functionality:
- Battlemage (BMG) Xe2 HPD display enabling (Balasubramani, Clint, Gustavo,
José, Matt, Anusha, Lucas, Ravi, Radhakrishna, Nirmoy, Ankit, Matthew)
- Panel Replay enabling (Jouni, Animesh)
- DP AUX-less ALPM (Advanced Link Power Management) and LOBF (Link off between
frames) enabling (Animesh, Jouni)
- Enable link training failure fallback for DP MST links (Imre)
- CMRR (Content Match Refresh Rate) enabling (Mitul)
- Allow the first async flip to change modifier (Ville)
- Enable eDP AUX based HDR backlight (Suraj)
- Increase ADL-S/ADL-P/DG2+ max TMDS bitrate to 6 Gbps (Ville)

Refactoring and cleanups:
- Stop using implicit dev_priv local variable in macros (Jani)
- Expand and clean up VBT table definitions (Ville)
- PSR/ALPM refactoring (Jouni, Animesh)
- Plane fb refactoring (Ville)
- Rawclk, FSB, and mem frequency refactoring (Jani)
- GVT register macro usage cleanups (Jani, Ville)
- Plane, cursor, wm and ddb register macro and usage cleanups (Ville)
- Pipe CRC register macro cleanups (Ville)
- PCI ID macro cleanups and refactoring to match xe style (Jani)
- Move drm-intel repo to gitlab.freedesktop.org (Ryszard)
- Identify all platforms/subplatforms in display probe (Jani)
- Move Intel drm headers under include/drm/intel (Jani)
- Drop local redundant W=1 warnings in favour of drm subsystem warnigs (Jani)
- Include cleanups; include what you use (Jani)
- Convert overlay and DMC error state printing to drm_printer (Jani)
- Joiner renames (Stan)
- DSB interface cleanups (Ville)
- Improve workaround for disabling FBC when VT-d is active (Vinod)
- State checker refactoring and cleanups for color, planes and cdclk (Ville)
- Cleanups around scanline arithmetic (Ville)
- Use drm_crtc_vblank_crtc() instead of open coding (Ville)
- DSC cleanups (Ville)

Fixes:
- Improve VBT array bounds check (Luca)
- LNL PSR fixes (Jouni)
- Audio workaround, disable min hblank fix (Uma)
- Stop selecting ACPI_BUTTON config (Jani)
- Add MTL Cx0 PHY config compare (Mika)
- Fix MTL C20 PHY port clock verification (Mika)
- Fix static analyzer warning for uapi.event access (Luca)
- HDCP fixes and workarounds (Suraj)
- Fix DP MST DSC input BPP computation (Imre)
- Fix assert on pending async-put power domain work (Imre)
- Fix documentation build for DMC wakelocks (Luca)
- Disable DSC on eDP when indicated by VBT (Ville)

DRM Core changes:
- Various DPCD register additions for panel replay and ALPM (Jouni)
- Add target_rr_divider to adaptive sync SDP (Mitul)

Xe driver changes:
- Remove unused xe->enabled_irq_mask and xe->sb_lock members (Jani)
- i915 display compat header cleanups (Jani)
- Remove redundant copy of intel_fbdev_fb.h (Ville)
- Add process name to devcoredump (José)
- Add xe_gt_err_once() (Matthew)
- Implement transient flush for BMG/Xe3 (Nirmoy)

Merges:
- Backmerges to sync with xe, drm-misc and upstream (Rodrigo, Jani)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87y170eu80.fsf@intel.com

Merge tag 'drm-misc-next-2024-06-20' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next

drm-misc-next for 6.11:

UAPI Changes:
  - New monochrome TV mode variant

Cross-subsystem Changes:
  - dma heaps: Change slightly the allocation hook prototype

Core Changes:

Driver Changes:
- ivpu: various improvements over firmware handling, clocks, power
   management, scheduling and logging.
- mgag200: Add BMC output, enable polling
- panfrost: Enable MT8188 support
- tidss: drm_panic support
- zynqmp_dp: IRQ cleanups, debugfs DP compliance testing API
- bridge:
   - sii902x: state validation improvements
- panel:
   - edp: Drop legacy panel compatibles
   - simple-bridge: Switch to devm_drm_bridge_add

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240620-heretic-honored-macaque-b40f8a@houat

Merge tag 'drm-misc-next-2024-06-13' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next

drm-misc-next for 6.11:

UAPI Changes:

Cross-subsystem Changes:

Core Changes:
- Sprinkle MODULE_DESCRIPTIONS everywhere they are missing
- bridge: Remove drm_bridge_chain_mode_fixup
- ci: Require a more recent version of mesa, improve farm estup and
   test generation
- mipi-dbi: Remove mipi_dbi_machine_little_endian, make SPI bits per
   word configurable, support RGB888, and allow pixel formats to be
   specified in the DT.
- mm: Remove drm_mm_replace_node
- panic: Allow to dump kmsg to the screen
- print: Add a drm prefix to warn level messages too, remove
   ___drm_dbg, consolidate prefix handling

Driver Changes:
- sun4i: Rework the blender setup for DE2
- bridges:
   - bridge-connector: Plumb in the new HDMI helpers
   - samsung-dsim: Fix timings calculation
   - tc358767: Plenty of small fixes
- panels:
   - More cleanup of prepare / enable state tracking in drivers
   - New panel: PrimeView PM070WL4,

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240613-cicada-of-infinite-unity-0955ca@houat

Merge tag 'drm-misc-next-2024-06-06' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next

drm-misc-next for 6.10:

UAPI Changes:

Cross-subsystem Changes:
  - dma-buf: Warn when reserving 0 fence slots, internal API
    enhancements for heaps

Core Changes:

Driver Changes:
  - atmel-hlcdc: Support XLCDC in sam9x7
  - msm: Validate registers XML description against schema in CI
  - v3d: Fix build warning
  - bridges:
    - analogix_dp: Various improvements
  - panels:
    - New panel: WL-355608-A8

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240606-vivid-amphibian-jackrabbit-40b1d1@houat

Merge tag 'drm-misc-next-2024-05-30' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next

drm-misc-next for 6.11:

UAPI Changes:
  - Deprecate DRM date and return a 0 date in DRM_IOCTL_VERSION

Core Changes:
  - connector: Create a set of helpers to help with HDMI support
  - fbdev: Create memory manager optimized fbdev emulation
  - panic: Allow to select fonts, improve drm_fb_dma_get_scanout_buffer

Driver Changes:
  - Remove driver owner assignments
  - Allow more drivers to compile with COMPILE_TEST
  - Conversions to drm_edid
  - ivpu: hardware scheduler support, profiling support, improvements
    to the platform support layer
  - mgag200: general reworks and improvements
  - nouveau: Add NVreg_RegistryDwords command line option
  - rockchip: Conversion to the hdmi helpers
  - sun4i: Conversion to the hdmi helpers
  - vc4: Conversion to the hdmi helpers
  - v3d: Perf counters improvements
  - zynqmp: IRQ and debugfs improvements
  - bridge:
    - Remove redundant checks on bridge->encoder
  - panels:
    - Switch panels from register table initialization to proper code
    - Now that the panel code tracks the panel state, remove every
      ad-hoc implementation in the panel drivers
    - New panels: Lincoln Tech Sol LCD185-101CT, Microtips Technology
      13-101HIEBCAF0-C, Microtips Technology MF-103HIEB0GA0, BOE
      nv110wum-l60, IVO t109nw41

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240530-hilarious-flat-magpie-5fa186@houat

drm/xe: Simplify locking in new_vma

Rather than acquiring and dropping the VM / BO dma-resv around
xe_vma_create and do the same thing upon adding preempt fences or an
error, hold these locks through the entire new_vma() function.

v2:
- Rebase (CI)

Cc: Fei Yang <fei.yang@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jagmeet Randhawa <jagmeet.randhawa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240618003859.3239239-1-matthew.brost@intel.com

drm/xe: Invert runnable_state / pending enable check and assert

Rather than checking for pending enable and asserting runnable_state ==
1 in sched done handler, invert these. This is more robust code taking
action based on the G2H message and asserting KMD tracking state is
correct.

Suggested-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240614061343.2931649-1-matthew.brost@intel.com

drm/xe/vf: Custom HuC initialization if VF

The HuC firmware is loaded and initialized by the PF driver. Make
sure VF driver performs only limited data structure initialization.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619214557.905-10-michal.wajdeczko@intel.com

drm/xe/vf: Skip engine ring enabling if VF

All engines will be correctly initialized by the PF driver.
Moreover, VF drivers can't access related engine registers.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619214557.905-9-michal.wajdeczko@intel.com

drm/xe/vf: Don't use register based TLB invalidation if VF

VF drivers can only use GuC-based TLB invalidation, as they don't
have access to the related registers. However, VFs shouldn't need
any explicit TLB invalidation before enabling CTB communication,
as there will be an implicit GGTT TLB invalidation issued by the
GuC itself as part of MMIO-based action handling.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619214557.905-8-michal.wajdeczko@intel.com

drm/xe/vf: Don't support gtidle if VF

VF drivers can't access any of gtidle control registers as this
functionality is owned by the PF driver.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619214557.905-7-michal.wajdeczko@intel.com

drm/xe/vf: Don't initialize OA if VF

We don't support Observation Architecture on the VF device.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619214557.905-6-michal.wajdeczko@intel.com

drm/xe/vf: Don't change hwe IRQ masks if using memory IRQs

We currently do not support changing the engine interrupt enable
mask on the per-engine basis when using memory based interrupts.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619214557.905-5-michal.wajdeczko@intel.com

drm/xe/vf: Don't apply tile workarounds if VF

The VF drivers can't apply any workarounds as they don't have
access to related registers. Since xe_wa_apply_tile_workarounds()
function is not using RTP yet, we have to add early return.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619214557.905-4-michal.wajdeczko@intel.com

drm/xe/vf: Don't run any save-restore RTP actions if VF

There are no RTP save-restore actions applicable for VFs on
current platforms. If any future platform will require some,
we will need to update the RTP framework to support VF_READY
or VF_ONLY actions. In the meantime, just skip all actions if
we are running as VF driver.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619214557.905-3-michal.wajdeczko@intel.com

drm/xe/vf: Disable features that do not apply to VFs

We already maintain several flags that control the availability
of features on a given device. Disable features, like PCODE or
GuC PC or GSC, that do not apply to a VF device.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240620100147.949-1-michal.wajdeczko@intel.com

drm/xe/xelpgp: Extend Wa_14019877138 to graphics 12.74

Wa_14019877138 is also needed for xe_lpgp graphics 12.74

Signed-off-by: Sai Teja Pottumuttu <sai.teja.pottumuttu@intel.com>
Reviewed-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619065614.131151-1-sai.teja.pottumuttu@intel.com

drm/xe/oa: Remove WARN_ON's for unsupported configurations

The OA ioctl's already have drm_dbg's which are sufficient to tell the user
that OA is not supported on unsupported configurations (execlist mode and
platform gen < 12). Having additional WARN_ON's for these during driver
probe create unnecessary noise. Just remove these WARN_ON's.

Suggested-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619225617.3465899-1-ashutosh.dixit@intel.com

drm/xe/oa: Call xe_oa_emit_oa_config() with new config when updating config

When UMD ask config to be updated, xe_oa_config_locked() was calling
xe_oa_emit_oa_config() that would use stream->oa_config but that is
only changed to the next oa_config after xe_oa_emit_oa_config() finish.
So it was setting the same config for all DRM_XE_PERF_IOCTL_CONFIG
calls.

Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619192854.199289-1-jose.souza@intel.com

drm/xe/oa: Fix potential NPD when OA is not initialized

If oa->xe can be NULL then we shall not use it as a valid pointer.

Fixes: cdf02fe1a94a ("drm/xe/oa/uapi: Add/remove OA config perf ops")
Fixes: b6fd51c62119 ("drm/xe/oa/uapi: Define and parse OA stream properties")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619175427.861-1-michal.wajdeczko@intel.com