linux-2.6-microblaze.git
11 years ago[media] exynos4-is: Prevent NULL pointer dereference when firmware isn't loaded
Sylwester Nawrocki [Fri, 31 May 2013 11:40:35 +0000 (08:40 -0300)]
[media] exynos4-is: Prevent NULL pointer dereference when firmware isn't loaded

Ensure the firmware isn't accessed in the driver when the firmware loading
routine has not completed. This fixes a potential kernel crash:
[   96.510000] Unable to handle kernel NULL pointer dereference at virtual address 00000000
[   96.520000] pgd = ee604000
[   96.520000] [00000000] *pgd=6e947831, *pte=00000000, *ppte=00000000
[   96.530000] Internal error: Oops: 17 [#1] PREEMPT SMP ARM
[   96.530000] Modules linked in:
[   96.530000] CPU: 2 PID: 2787 Comm: camera_test Not tainted 3.10.0-rc1-00269-gcdbde37-dirty #2158
[   96.545000] task: ee42e400 ti: edfcc000 task.ti: edfcc000
[   96.545000] PC is at fimc_is_start_firmware+0x14/0x94
[   96.545000] LR is at fimc_isp_subdev_s_power+0x13c/0x1f8
...
[   96.745000] [<c03e0354>] (fimc_is_start_firmware+0x14/0x94) from [<c03e1cc4>] (fimc_isp_subdev_s_power+0x13c/0x1f8)
[   96.745000] [<c03e1cc4>] (fimc_isp_subdev_s_power+0x13c/0x1f8) from [<c03ed088>] (__subdev_set_power+0x70/0x84)
[   96.745000] [<c03ed088>] (__subdev_set_power+0x70/0x84) from [<c03ed164>] (fimc_pipeline_s_power+0xc8/0x164)
[   96.745000] [<c03ed164>] (fimc_pipeline_s_power+0xc8/0x164) from [<c03ee2b8>] (__fimc_pipeline_open+0x90/0x268)
[   96.745000] [<c03ee2b8>] (__fimc_pipeline_open+0x90/0x268) from [<c03ec5f0>] (fimc_capture_open+0xe4/0x1ec)
[   96.745000] [<c03ec5f0>] (fimc_capture_open+0xe4/0x1ec) from [<c03c5560>] (v4l2_open+0xa8/0xe4)
[   96.745000] [<c03c5560>] (v4l2_open+0xa8/0xe4) from [<c0112900>] (chrdev_open+0x9c/0x158)
[   96.745000] [<c0112900>] (chrdev_open+0x9c/0x158) from [<c010d3e0>] (do_dentry_open+0x1f4/0x27c)
[   96.745000] [<c010d3e0>] (do_dentry_open+0x1f4/0x27c) from [<c010d558>] (finish_open+0x34/0x50)
[   96.745000] [<c010d558>] (finish_open+0x34/0x50) from [<c011bea0>] (do_last+0x59c/0xbcc)
[   96.745000] [<c011bea0>] (do_last+0x59c/0xbcc) from [<c011c580>] (path_openat+0xb0/0x484)
[   96.745000] [<c011c580>] (path_openat+0xb0/0x484) from [<c011ca58>] (do_filp_open+0x30/0x84)
[   96.745000] [<c011ca58>] (do_filp_open+0x30/0x84) from [<c010d060>] (do_sys_open+0xe8/0x170)
[   96.745000] [<c010d060>] (do_sys_open+0xe8/0x170) from [<c000f040>] (ret_fast_syscall+0x0/0x30)

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] s5p-mfc: Add NULL check for allocated buffer
Sachin Kamat [Wed, 29 May 2013 03:10:00 +0000 (00:10 -0300)]
[media] s5p-mfc: Add NULL check for allocated buffer

In certain cases, dma_alloc_coherent returns NULL. Add check for
NULL pointer.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] s5p-mfc: added missing end-of-lines in debug messages
Andrzej Hajda [Tue, 28 May 2013 06:26:16 +0000 (03:26 -0300)]
[media] s5p-mfc: added missing end-of-lines in debug messages

Many debug messages missed end-of-line.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] s5p-mfc: v4l2 controls setup routine moved to initialization code
Andrzej Hajda [Tue, 28 May 2013 06:26:15 +0000 (03:26 -0300)]
[media] s5p-mfc: v4l2 controls setup routine moved to initialization code

Callback .start_streaming is called once for every queue,
so v4l2_ctrl_handler_setup was called twice during stream start.
Moving v4l2_ctrl_handler_setup to context initialization
reduces numbers of calls and seems to be more consistent with API.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] s5p-mfc: separate encoder parameters for h264 and mpeg4
Andrzej Hajda [Tue, 28 May 2013 06:26:14 +0000 (03:26 -0300)]
[media] s5p-mfc: separate encoder parameters for h264 and mpeg4

This patch fixes a bug which caused overwriting h264 codec
parameters by mpeg4 parameters during V4L2 control setting.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] s5p-mfc: Remove special clock usage in driver
Arun Kumar K [Mon, 27 May 2013 06:39:29 +0000 (03:39 -0300)]
[media] s5p-mfc: Remove special clock usage in driver

MFC uses two clocks - MFC gate clock and special clock
which is named as "sclk_mfc" in exynos4 and "aclk_333" in
exynos5 SoC. The driver was doing just a clk_prepare on
this special clock without a clk_enable call. As this
sclk is the parent of gate clock, it gets prepared and
enabled along with the gate clock. So there is no need
for the driver to use this sclk. This patch removes the
sclk usage from driver.

Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] s5p-mfc: Remove unused s5p_mfc_get_decoded_status_v6() function
Sylwester Nawrocki [Sat, 25 May 2013 10:25:55 +0000 (07:25 -0300)]
[media] s5p-mfc: Remove unused s5p_mfc_get_decoded_status_v6() function

This patch fixes following compilation warning:
  CC [M]  drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.o
drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c:1733:12: warning: ‘s5p_mfc_get_decoded_status_v6’ defined but not used
It assigns existing but not used s5p_mfc_get_dec_status_v6() function to the
get_dec_status callback. It seems the get_dec_status callback is not used
anyway, as there is no corresponding s5p_mfc_hw_call().

Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] v4l2: mem2mem: save irq flags correctly
John Sheu [Thu, 23 May 2013 23:41:48 +0000 (20:41 -0300)]
[media] v4l2: mem2mem: save irq flags correctly

Save flags correctly when taking spinlocks in v4l2_m2m_try_schedule.

Signed-off-by: John Sheu <sheu@google.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] coda: v4l2-compliance fix: add VIDIOC_CREATE_BUFS support
Philipp Zabel [Tue, 21 May 2013 07:16:29 +0000 (04:16 -0300)]
[media] coda: v4l2-compliance fix: add VIDIOC_CREATE_BUFS support

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] v4l2-mem2mem: add v4l2_m2m_create_bufs helper
Philipp Zabel [Tue, 21 May 2013 07:16:28 +0000 (04:16 -0300)]
[media] v4l2-mem2mem: add v4l2_m2m_create_bufs helper

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] media: v4l2-mem2mem: return for polling if a buffer is available
Seung-Woo Kim [Tue, 21 May 2013 02:47:30 +0000 (23:47 -0300)]
[media] media: v4l2-mem2mem: return for polling if a buffer is available

The v4l2_m2m_poll() does not need to wait if there is already a buffer in
done_list of source and destination queues, but current v4l2_m2m_poll() always
waits. So done_list of each queue is checked before calling poll_wait().

Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] media: vb2: return for polling if a buffer is available
Seung-Woo Kim [Tue, 21 May 2013 02:47:29 +0000 (23:47 -0300)]
[media] media: vb2: return for polling if a buffer is available

The vb2_poll() does not need to wait next vb_buffer_done() if there is already
a buffer in done_list of queue, but current vb2_poll() always waits.
So done_list is checked before calling poll_wait().

Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] s5p-mfc: Update v6 encoder buffer alloc
Arun Kumar K [Wed, 24 Apr 2013 12:41:53 +0000 (09:41 -0300)]
[media] s5p-mfc: Update v6 encoder buffer alloc

MFC v6 needs minimum number of output buffers to be queued
for encoder depending on the stream type and profile.
The patch modifies the driver so that encoding cannot be
started with lesser number of OUTPUT buffers than required.
This also fixes the crash happeninig during multi instance
encoder-decoder simultaneous run due to memory allocation
happening from interrupt context.

Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] staging/solo6x10: select the desired font
Xiong Zhou [Fri, 17 May 2013 10:24:05 +0000 (07:24 -0300)]
[media] staging/solo6x10: select the desired font

Make sure FONT_8x16 can be found by find_font().

Signed-off-by: Xiong Zhou <jencce.kernel@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] drivers/staging: davinci: vpfe: fix dependency for building the driver
Lad, Prabhakar [Mon, 13 May 2013 09:39:07 +0000 (06:39 -0300)]
[media] drivers/staging: davinci: vpfe: fix dependency for building the driver

from commit 3778d05036cc7ddd983ae2451da579af00acdac2
[media: davinci: kconfig: fix incorrect selects]
VIDEO_VPFE_CAPTURE was removed but there was a negative
dependancy for building the DM365 VPFE MC based capture driver
(VIDEO_DM365_VPFE), This patch fixes this dependency by replacing
the VIDEO_VPFE_CAPTURE with VIDEO_DM365_ISIF, so as when older DM365
ISIF v4l driver is selected the newer media controller driver for
DM365 isnt visible.

Reported-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] exynos4-is: Correct fimc-lite compatible property description
Sylwester Nawrocki [Thu, 9 May 2013 11:43:34 +0000 (08:43 -0300)]
[media] exynos4-is: Correct fimc-lite compatible property description

Ensure the compatible property for FIMC-LITE IP blocks is properly
documented, a cut&paste error fix.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] exynos4-is: Fix off-by-one valid range checking for is->config_index
Axel Lin [Tue, 30 Apr 2013 13:18:23 +0000 (10:18 -0300)]
[media] exynos4-is: Fix off-by-one valid range checking for is->config_index

Current code uses is->config_index as array subscript, thus the valid value
range is 0 ... ARRAY_SIZE(cmd) - 1.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] s5c73m3: Fix off-by-one valid range checking for fie->index
Axel Lin [Tue, 30 Apr 2013 03:42:16 +0000 (00:42 -0300)]
[media] s5c73m3: Fix off-by-one valid range checking for fie->index

Current code uses fie->index as array subscript, thus the valid value range
is 0 ... ARRAY_SIZE(s5c73m3_intervals) - 1.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] s3c-camif: Fix incorrect variable type
Sachin Kamat [Tue, 30 Apr 2013 05:16:19 +0000 (02:16 -0300)]
[media] s3c-camif: Fix incorrect variable type

'rotation' was an 8 bit variable and hence could not have values
greater than 255. Since we need higher values, change it to 16
bit type.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] exynos4-is: Fix potential null pointer dereference in mipi-csis.c
Sachin Kamat [Fri, 26 Apr 2013 07:52:57 +0000 (04:52 -0300)]
[media] exynos4-is: Fix potential null pointer dereference in mipi-csis.c

When 'node' is NULL, the print statement tries to dereference it.
Hence replace the variable with the one that is accessible.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] vpfe-capture.c: remove unused label probe_free_lock
Hans Verkuil [Fri, 10 May 2013 10:53:08 +0000 (07:53 -0300)]
[media] vpfe-capture.c: remove unused label probe_free_lock

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] DocBook: media: update codec section, drop obsolete 'suspended' state
Hans Verkuil [Tue, 7 May 2013 11:06:11 +0000 (08:06 -0300)]
[media] DocBook: media: update codec section, drop obsolete 'suspended' state

The Codec section in the V4L2 specification was marked as 'suspended', even
though codec support has been around for quite some time. Update this
section, explaining a bit about memory-to-memory devices and pointing to
the MPEG controls section.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] radio-si476x: depend on SND_SOC
Arnd Bergmann [Thu, 2 May 2013 14:16:26 +0000 (11:16 -0300)]
[media] radio-si476x: depend on SND_SOC

It is not possible to select SND_SOC_SI476X if we have not also
enabled SND_SOC.
warning: (RADIO_SI476X) selects SND_SOC_SI476X which has unmet
 direct dependencies (SOUND && !M68K && !UML && SND && SND_SOC)

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[hans.verkuil@cisco.com: fixed wrong driver name in subject]
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] v4l2: SI476X MFD - Do not use binary constants
Geert Uytterhoeven [Wed, 8 May 2013 19:23:41 +0000 (16:23 -0300)]
[media] v4l2: SI476X MFD - Do not use binary constants

Gcc < 4.3 doesn't understand binary constanrs (0b*):
drivers/media/radio/radio-si476x.c:862:20: error: invalid suffix "b10000000" on integer constant
Hence use a hexadecimal constant (0x*) instead.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] davinci: vpfe: fix error return code in vpfe_probe()
Wei Yongjun [Tue, 7 May 2013 10:51:21 +0000 (07:51 -0300)]
[media] davinci: vpfe: fix error return code in vpfe_probe()

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] davinci: vpfe: fix error path in probe
Lad, Prabhakar [Fri, 10 May 2013 03:48:38 +0000 (00:48 -0300)]
[media] davinci: vpfe: fix error path in probe

The error path on failure was calling mutex_unlock(), but there was
no actuall call before for mutex_lock(). This patch fixes this issue
by pointing it to proper go label.

Reported-by: Jose Pablo Carballo <jose.carballo@ridgerun.com>
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] media: davinci: vpbe: fix layer availability for NV12 format
Lad, Prabhakar [Tue, 7 May 2013 04:07:25 +0000 (01:07 -0300)]
[media] media: davinci: vpbe: fix layer availability for NV12 format

For NV12 format, even if display data is single image,
both VIDWIN0 and VIDWIN1 parameters must be used. The start
address of Y data plane and C data plane is configured in
VIDEOWIN0ADH/L and VIDEOWIN1ADH/L respectively.
cuurently only one layer was requested, which is suffice
for yuv422, but for yuv420(NV12) two layers are required and
fix the same by requesting for other layer if pix fmt is NV12
during set_fmt.

Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] gspca-sonixb: Adjust hstart on sn9c103 + pas202
Hans de Goede [Mon, 29 Apr 2013 11:54:14 +0000 (08:54 -0300)]
[media] gspca-sonixb: Adjust hstart on sn9c103 + pas202

For some unknown reason we need to increase hstart by 1 on when using the
PAS202 on the sn9c103 (versus on the sn9c102), otherwise we get the wrong
colors, due to shifting of the bayer pattern.

Reported-by: Patrizio Bassi <patrizio.bassi@gmail.com>
Tested-by: Patrizio Bassi <patrizio.bassi@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] pwc: Fix comment wrt lock ordering
Hans de Goede [Mon, 1 Apr 2013 21:04:21 +0000 (18:04 -0300)]
[media] pwc: Fix comment wrt lock ordering

With all the changes to handle the locking in the v4l2-core rather then at
the driver level, the order in which the 2 pwc locks need to be taken has
changed, update the comment in the header file to correctly reflect this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years agoMerge branch 'devel-for-v3.10' into v4l_for_linus
Mauro Carvalho Chehab [Tue, 30 Apr 2013 12:01:04 +0000 (09:01 -0300)]
Merge branch 'devel-for-v3.10' into v4l_for_linus

* patchwork: (831 commits)
  [media] cx88: make core less verbose
  [media] em28xx: fix oops at em28xx_dvb_bus_ctrl()
  [media] s5c73m3: fix indentation of the help section in Kconfig
  [media] cx25821-alsa: get rid of a __must_check warning
  [media] cx25821-video: declare cx25821_vidioc_s_std as static
  [media] cx25821-video: remove maxw from cx25821_vidioc_try_fmt_vid_cap
  [media] r820t: Remove a warning for an unused value
  [media] dib0090: Fix a warning at dib0090_set_EFUSE
  [media] dib8000: fix a warning
  [media] dib8000: Fix sub-channel range
  [media] dib8000: store dtv_property_cache in a temp var
  [media] dib8000: warning fix: declare internal functions as static
  [media] r820t: quiet gcc warning on n_ring
  [media] r820t: memory leak in release()
  [media] r820t: precendence bug in r820t_xtal_check()
  [media] videodev2.h: Remove the unused old V4L1 buffer types
  [media] anysee: Grammar s/report the/report to/
  [media] anysee: Initialize ret = 0 in anysee_frontend_attach()
  [media] media: videobuf2: fix the length check for mmap
  [media] em28xx: save isoc endpoint number for DVB only if endpoint has alt settings with xMaxPacketSize != 0
  ...

Conflicts:
drivers/media/pci/cx25821/cx25821-video.c
drivers/media/platform/Kconfig

11 years agoMerge tag 'v3.9' into v4l_for_linus
Mauro Carvalho Chehab [Tue, 30 Apr 2013 12:00:33 +0000 (09:00 -0300)]
Merge tag 'v3.9' into v4l_for_linus

Linux 3.9

* tag 'v3.9': (1099 commits)
  Linux 3.9
  vm: add no-mmu vm_iomap_memory() stub
  efivars: only check for duplicates on the registered list
  TTY: fix atime/mtime regression
  aio: fix possible invalid memory access when DEBUG is enabled
  parisc: use spin_lock_irqsave/spin_unlock_irqrestore for PTE updates
  parisc: disable -mlong-calls compiler option for kernel modules
  parisc: uaccess: fix compiler warnings caused by __put_user casting
  parisc: Change kunmap macro to static inline function
  parisc: Provide __ucmpdi2 to resolve undefined references in 32 bit builds.
  sparc64: Fix missing put_cpu_var() in tlb_batch_add_one() when not batching.
  Revert "gpio: pxa: set initcall level to module init"
  efi: Check EFI revision in setup_efi_vars
  x86, efi: Fix a build warning
  Revert "MIPS: page.h: Provide more readable definition for PAGE_MASK."
  kernel/hz.bc: ignore.
  Linux 3.9-rc8
  events: Protect access via task_subsys_state_check()
  net: fix incorrect credentials passing
  x86, microcode: Verify the family before dispatching microcode patching
  ...

11 years agoLinux 3.9
Linus Torvalds [Mon, 29 Apr 2013 00:36:01 +0000 (17:36 -0700)]
Linux 3.9

11 years ago[media] cx88: make core less verbose
Mauro Carvalho Chehab [Sun, 28 Apr 2013 10:15:41 +0000 (07:15 -0300)]
[media] cx88: make core less verbose

Along the time, several debug messages were added at cx88-cards.
While those are still useful to track some troubles with
tuners, they're too verbose:
[ 5768.281801] cx88[0]: Calling XC2028/3028 callback
[ 5768.287388] cx88[0]: Calling XC2028/3028 callback
[ 5768.292575] cx88[0]: Calling XC2028/3028 callback
[ 5768.299408] cx88[0]: Calling XC2028/3028 callback
[ 5768.306244] cx88[0]: Calling XC2028/3028 callback
...

and, most of the time, useless.

So, disable them, except if core_debug modprobe parameter
is used.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] em28xx: fix oops at em28xx_dvb_bus_ctrl()
Mauro Carvalho Chehab [Sun, 28 Apr 2013 13:33:57 +0000 (10:33 -0300)]
[media] em28xx: fix oops at em28xx_dvb_bus_ctrl()

em28xx is oopsing with some DVB devices:

[10856.061884] general protection fault: 0000 [#1] SMP
[10856.067041] Modules linked in: rc_hauppauge em28xx_rc xc5000 drxk em28xx_dvb dvb_core em28xx videobuf2_vmalloc videobuf2_memops videobuf2_core rc_pixelview_new tuner_xc2028 tuner cx8800 cx88xx tveeprom btcx_risc videobuf_dma_sg videobuf_core rc_core v4l2_common videodev ebtable_nat ebtables nf_conntrack_ipv4 nf_defrag_ipv4 xt_CHECKSUM be2iscsi iscsi_boot_sysfs iptable_mangle bnx2i cnic uio cxgb4i cxgb4 tun bridge cxgb3i cxgb3 stp ip6t_REJECT mdio libcxgbi nf_conntrack_ipv6 llc nf_defrag_ipv6 ib_iser rdma_cm ib_addr xt_conntrack iw_cm ib_cm ib_sa nf_conntrack ib_mad ib_core bnep bluetooth iscsi_tcp libiscsi_tcp ip6table_filter libiscsi ip6_tables scsi_transport_iscsi xfs libcrc32c snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_seq snd_seq_device snd_pcm tg3 snd_page_alloc snd_timer
[10856.139176]  snd ptp iTCO_wdt soundcore pps_core iTCO_vendor_support lpc_ich mfd_core coretemp nfsd hp_wmi crc32c_intel microcode serio_raw rfkill sparse_keymap nfs_acl lockd sunrpc kvm_intel kvm uinput binfmt_misc firewire_ohci nouveau mxm_wmi i2c_algo_bit drm_kms_helper firewire_core crc_itu_t ttm drm i2c_core wmi [last unloaded: dib0070]
[10856.168969] CPU 1
[10856.170799] Pid: 13606, comm: dvbv5-zap Not tainted 3.9.0-rc5+ #26 Hewlett-Packard HP Z400 Workstation/0AE4h
[10856.181187] RIP: 0010:[<ffffffffa0459e47>]  [<ffffffffa0459e47>] em28xx_write_regs_req+0x37/0x1c0 [em28xx]
[10856.191028] RSP: 0018:ffff880118401a58  EFLAGS: 00010282
[10856.196533] RAX: 00020000012d0000 RBX: ffff88010804aec8 RCX: ffff880118401b14
[10856.203852] RDX: 0000000000000048 RSI: 0000000000000000 RDI: ffff88010804aec8
[10856.211174] RBP: ffff880118401ac8 R08: 0000000000000001 R09: 0000000000000000
[10856.218496] R10: 0000000000000000 R11: 0000000000000006 R12: 0000000000000048
[10856.226026] R13: ffff880118401b14 R14: ffff88011752b258 R15: ffff88011752b258
[10856.233352] FS:  00007f26636d2740(0000) GS:ffff88011fc20000(0000) knlGS:0000000000000000
[10856.241626] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[10856.247565] CR2: 00007f2663716e20 CR3: 00000000c7eb1000 CR4: 00000000000007e0
[10856.254889] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[10856.262215] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[10856.269542] Process dvbv5-zap (pid: 13606, threadinfo ffff880118400000, task ffff8800cd625d40)
[10856.278340] Stack:
[10856.280564]  ffff88011ffe8de8 0000000000000002 0000000000000000 ffff88011ffe9b00
[10856.288191]  ffff880118401b14 00ff88011ffe9b08 ffff880100000048 ffffffff8112a52a
[10856.295893]  0000000000000001 ffff88010804aec8 0000000000000048 ffff880118401b14
[10856.303521] Call Trace:
[10856.306182]  [<ffffffff8112a52a>] ? __alloc_pages_nodemask+0x15a/0x960
[10856.312912]  [<ffffffffa045a002>] em28xx_write_regs+0x32/0xa0 [em28xx]
[10856.319638]  [<ffffffffa045a221>] em28xx_write_reg+0x21/0x30 [em28xx]
[10856.326279]  [<ffffffffa045a2cc>] em28xx_gpio_set+0x9c/0x100 [em28xx]
[10856.332919]  [<ffffffffa045a3ac>] em28xx_set_mode+0x7c/0x80 [em28xx]
[10856.339472]  [<ffffffffa03ef032>] em28xx_dvb_bus_ctrl+0x32/0x40 [em28xx_dvb]

This is caused by commit c7a45e5b4f8c2f96cd242ae1b1c06e7fb19a08d0,
that added support for two I2C buses. A partial fix was applied
at 3de09fbbfaa521e68675bd30cfece252c4856600, but it doesn't cover
all cases, as the DVB core fills fe->dvb->priv with adapter->priv.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years agoMerge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm...
Linus Torvalds [Sat, 27 Apr 2013 20:58:36 +0000 (13:58 -0700)]
Merge tag 'fixes-for-linus' of git://git./linux/kernel/git/arm/arm-soc

Pull ARM SoC fix from Olof Johansson:
 "A late-arriving fix for musb on OMAP4, resolving an issue where the
  musb IP won't be clocked and thus not functional.  Small in scope,
  most of the lines changed is a longish comment."

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: OMAP4: hwmod data: make 'ocp2scp_usb_phy_phy_48m" as the main clock

11 years agovm: add no-mmu vm_iomap_memory() stub
Linus Torvalds [Sat, 27 Apr 2013 20:25:38 +0000 (13:25 -0700)]
vm: add no-mmu vm_iomap_memory() stub

I think we could just move the full vm_iomap_memory() function into
util.h or similar, but I didn't get any reply from anybody actually
using nommu even to this trivial patch, so I'm not going to touch it any
more than required.

Here's the fairly minimal stub to make the nommu case at least
potentially work.  It doesn't seem like anybody cares, though.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoMerge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sat, 27 Apr 2013 17:08:09 +0000 (10:08 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull perf fix from Ingo Molnar:
 "This fix adds missing RCU read protection"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  events: Protect access via task_subsys_state_check()

11 years agoMerge tag 'omap-for-v3.9-rc6/fixes-signed' of git://git.kernel.org/pub/scm/linux...
Olof Johansson [Sat, 27 Apr 2013 00:35:13 +0000 (17:35 -0700)]
Merge tag 'omap-for-v3.9-rc6/fixes-signed' of git://git./linux/kernel/git/tmlind/linux-omap into fixes

From Tony Lindgren:
One MUSB regression fix that I forgot to send earlier. Without
this MUSB no longer works on omap4 based devices.

* tag 'omap-for-v3.9-rc6/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP4: hwmod data: make 'ocp2scp_usb_phy_phy_48m" as the main clock

Signed-off-by: Olof Johansson <olof@lixom.net>
11 years agoMerge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab...
Linus Torvalds [Fri, 26 Apr 2013 15:17:07 +0000 (08:17 -0700)]
Merge branch 'v4l_for_linus' of git://git./linux/kernel/git/mchehab/linux-media

Pull media fixes from Mauro Carvalho Chehab:
 "Two driver fixes.

  One avoids reading any file at a system with a cx25821 board
  (fortunately, this is not a common device).  The other one prevents
  reading after a buffer with ISDB-T devices based on mb86a20s."

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] cx25821: do not expose broken video output streams
  [media] mb86a20s: Fix estimate_rate setting

11 years agoMerge branch 'fixes-3.9-late' of git://git.kernel.org/pub/scm/linux/kernel/git/deller...
Linus Torvalds [Fri, 26 Apr 2013 15:05:01 +0000 (08:05 -0700)]
Merge branch 'fixes-3.9-late' of git://git./linux/kernel/git/deller/parisc-linux

Pull late parisc fixes from Helge Deller:
 "I know it's *very* late in the 3.9 release cycle, but since there
  aren't that many people testing the parisc linux kernel, a few (for
  our port) critical issues just showed up a few days back for the first
  time.

  What's in it?
   - add missing __ucmpdi2 symbol, which is required for btrfs on 32bit
     kernel.
   - change kunmap() macro to static inline function.  This fixes a
     debian/gcc-4.4 build error.
   - add locking when doing PTE updates.  This fixes random userspace
     crashes.
   - disable (optional) -mlong-calls compiler option for modules, else
     modules can't be loaded at runtime.
   - a smart patch by Will Deacon which fixes 64bit put_user() warnings
     on 32bit kernel."

* 'fixes-3.9-late' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: use spin_lock_irqsave/spin_unlock_irqrestore for PTE updates
  parisc: disable -mlong-calls compiler option for kernel modules
  parisc: uaccess: fix compiler warnings caused by __put_user casting
  parisc: Change kunmap macro to static inline function
  parisc: Provide __ucmpdi2 to resolve undefined references in 32 bit builds.

11 years agoefivars: only check for duplicates on the registered list
Matt Fleming [Fri, 26 Apr 2013 09:10:55 +0000 (10:10 +0100)]
efivars: only check for duplicates on the registered list

variable_is_present() accesses '__efivars' directly, but when called via
gsmi_init() Michel reports observing the following crash,

  BUG: unable to handle kernel NULL pointer dereference at (null)
  IP: variable_is_present+0x55/0x170
  Call Trace:
    register_efivars+0x106/0x370
    gsmi_init+0x2ad/0x3da
    do_one_initcall+0x3f/0x170

The reason for the crash is that '__efivars' hasn't been initialised nor
has it been registered with register_efivars() by the time the google
EFI SMI driver runs.  The gsmi code uses its own struct efivars, and
therefore, a different variable list.  Fix the above crash by passing
the registered struct efivars to variable_is_present(), so that we
traverse the correct list.

Reported-by: Michel Lespinasse <walken@google.com>
Tested-by: Michel Lespinasse <walken@google.com>
Cc: Mike Waychison <mikew@google.com>
Cc: Matthew Garrett <matthew.garrett@nebula.com>
Cc: Seiji Aguchi <seiji.aguchi@hds.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoTTY: fix atime/mtime regression
Jiri Slaby [Fri, 26 Apr 2013 11:48:53 +0000 (13:48 +0200)]
TTY: fix atime/mtime regression

In commit b0de59b5733d ("TTY: do not update atime/mtime on read/write")
we removed timestamps from tty inodes to fix a security issue and waited
if something breaks.  Well, 'w', the utility to find out logged users
and their inactivity time broke.  It shows that users are inactive since
the time they logged in.

To revert to the old behaviour while still preventing attackers to
guess the password length, we update the timestamps in one-minute
intervals by this patch.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoaio: fix possible invalid memory access when DEBUG is enabled
Zhao Hongjiang [Fri, 26 Apr 2013 03:03:53 +0000 (11:03 +0800)]
aio: fix possible invalid memory access when DEBUG is enabled

dprintk() shouldn't access @ring after it's unmapped.

Signed-off-by: Zhao Hongjiang <zhaohongjiang@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoMerge tag 'efi-urgent' into x86/urgent
H. Peter Anvin [Thu, 25 Apr 2013 21:00:22 +0000 (14:00 -0700)]
Merge tag 'efi-urgent' into x86/urgent

 * The EFI variable anti-bricking algorithm merged in -rc8 broke booting
   on some Apple machines because they implement EFI spec 1.10, which
   doesn't provide a QueryVariableInfo() runtime function and the logic
   used to check for the existence of that function was insufficient.
   Fix from Josh Boyer.

 * The anti-bricking algorithm also introduced a compiler warning on
   32-bit. Fix from Borislav Petkov.

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
11 years agoparisc: use spin_lock_irqsave/spin_unlock_irqrestore for PTE updates
John David Anglin [Tue, 23 Apr 2013 20:42:07 +0000 (22:42 +0200)]
parisc: use spin_lock_irqsave/spin_unlock_irqrestore for PTE updates

User applications running on SMP kernels have long suffered from instability
and random segmentation faults.  This patch improves the situation although
there is more work to be done.

One of the problems is the various routines in pgtable.h that update page table
entries use different locking mechanisms, or no lock at all (set_pte_at).  This
change modifies the routines to all use the same lock pa_dbit_lock.  This lock
is used for dirty bit updates in the interruption code. The patch also purges
the TLB entries associated with the PTE to ensure that inconsistent values are
not used after the page table entry is updated.  The UP and SMP code are now
identical.

The change also includes a minor update to the purge_tlb_entries function in
cache.c to improve its efficiency.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: Helge Deller <deller@gmx.de>
Signed-off-by: Helge Deller <deller@gmx.de>
11 years agoparisc: disable -mlong-calls compiler option for kernel modules
Helge Deller [Tue, 23 Apr 2013 19:29:03 +0000 (21:29 +0200)]
parisc: disable -mlong-calls compiler option for kernel modules

CONFIG_MLONGCALLS was introduced in commit
ec758f98328da3eb933a25dc7a2eed01ef44d849 to overcome linker issues when linking
huge linux kernels, e.g. with many modules linked in.

But in the kernel module loader there is no support yet for the new relocation
types, which is why modules built with -mlong-calls can't be loaded.
Furthermore, for modules long calls are not really necessary, since we already
use stub sections which resolve long distance calls.

So, let's just disable this compiler option when compiling kernel modules.

Signed-off-by: Helge Deller <deller@gmx.de>
11 years agoparisc: uaccess: fix compiler warnings caused by __put_user casting
Will Deacon [Mon, 22 Apr 2013 12:53:43 +0000 (12:53 +0000)]
parisc: uaccess: fix compiler warnings caused by __put_user casting

When targetting 32-bit processors, __put_user emits a pair of stw
instructions for the 8-byte case. If the type of __val is a pointer, the
marshalling code casts it to the wider integer type of u64, resulting
in the following compiler warnings:

  kernel/signal.c: In function 'copy_siginfo_to_user':
  kernel/signal.c:2752:11: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
  kernel/signal.c:2752:11: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
  [...]

This patch fixes the warnings by removing the marshalling code and using
the correct output modifiers in the __put_{user,kernel}_asm64 macros
so that GCC will allocate the right registers without the need to
extract the two words explicitly.

Cc: Helge Deller <deller@gmx.de>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Helge Deller <deller@gmx.de>
11 years agoparisc: Change kunmap macro to static inline function
John David Anglin [Tue, 23 Apr 2013 00:23:50 +0000 (00:23 +0000)]
parisc: Change kunmap macro to static inline function

Change kunmap macro to static inline function to fix build error
compiling drivers/base/dma-buf.c.

Without the change, the following error can occur:

   CC      drivers/base/dma-buf.o
drivers/base/dma-buf.c: In function 'dma_buf_kunmap':
drivers/base/dma-buf.c:427:46:
error: macro "kunmap" passed 3 arguments, but takes just 1

I believe parisc is the only arch to implement kunmap using a macro.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Helge Deller <deller@gmx.de>
Signed-off-by: Helge Deller <deller@gmx.de>
11 years agoparisc: Provide __ucmpdi2 to resolve undefined references in 32 bit builds.
John David Anglin [Sat, 20 Apr 2013 19:41:06 +0000 (19:41 +0000)]
parisc: Provide __ucmpdi2 to resolve undefined references in 32 bit builds.

The Debian experimental linux source package (3.8.5-1) build fails
with the following errors:
...
MODPOST 2016 modules
ERROR: "__ucmpdi2" [fs/btrfs/btrfs.ko] undefined!
ERROR: "__ucmpdi2" [drivers/md/dm-verity.ko] undefined!

The attached patch resolves this problem.  It is based on the s390
implementation of ucmpdi2.c.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Signed-off-by: Helge Deller <deller@gmx.de>
11 years ago[media] s5c73m3: fix indentation of the help section in Kconfig
Gianluca Gennari [Thu, 25 Apr 2013 13:46:38 +0000 (10:46 -0300)]
[media] s5c73m3: fix indentation of the help section in Kconfig

The 'help' section of the Kconfig entry for this driver is missing
an extra alignment. That seems to violate what's stated at:
Documentation/kbuild/kconfig-language.txt

Even if it works, the better is to add 2 extra spaces there, as
this is the common practice and helps human reading of the file.

Also, the way it is, it breaks backport trees.

Signed-off-by: Gianluca Gennari <gennarone@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] cx25821-alsa: get rid of a __must_check warning
Mauro Carvalho Chehab [Thu, 25 Apr 2013 18:58:44 +0000 (15:58 -0300)]
[media] cx25821-alsa: get rid of a __must_check warning

The hole reason for __must_check is to not ignore an error.

However, a "ret" value is used at cx25821 just to avoid the
Kernel compilation to compain about it.

That, however, produces another warning (with W=1):

drivers/media/pci/cx25821/cx25821-alsa.c: In function 'cx25821_audio_fini':
drivers/media/pci/cx25821/cx25821-alsa.c:727:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]

With the current implementation of driver_for_each_device() and
cx25821_alsa_exit_callback(), there's actually just one
very unlikely condition where it will currently produce
an error: if driver_find() returns NULL.

Ok, there's not much that can be done, as it is on a driver's
function that returns void, but it can at least print some message
if the error happens.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] cx25821-video: declare cx25821_vidioc_s_std as static
Mauro Carvalho Chehab [Thu, 25 Apr 2013 18:49:33 +0000 (15:49 -0300)]
[media] cx25821-video: declare cx25821_vidioc_s_std as static

Fixes the following warning:

drivers/media/pci/cx25821/cx25821-video.c: At top level:
drivers/media/pci/cx25821/cx25821-video.c:766:5: warning: no previous prototype for 'cx25821_vidioc_s_std' [-Wmissing-prototypes]

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] cx25821-video: remove maxw from cx25821_vidioc_try_fmt_vid_cap
Mauro Carvalho Chehab [Thu, 25 Apr 2013 18:46:36 +0000 (15:46 -0300)]
[media] cx25821-video: remove maxw from cx25821_vidioc_try_fmt_vid_cap

After cx25821-video cleanup, this var is not used anymore:

drivers/media/pci/cx25821/cx25821-video.c: In function 'cx25821_vidioc_try_fmt_vid_cap':
drivers/media/pci/cx25821/cx25821-video.c:591:15: warning: variable 'maxw' set but not used [-Wunused-but-set-variable]

as the code now checks the max width as the default case for the
range check.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] r820t: Remove a warning for an unused value
Mauro Carvalho Chehab [Thu, 25 Apr 2013 18:40:21 +0000 (15:40 -0300)]
[media] r820t: Remove a warning for an unused value

Currently, the driver complains about the pre_detect var:

drivers/media/tuners/r820t.c: In function 'r820t_sysfreq_sel':
drivers/media/tuners/r820t.c:722:31: warning: variable 'pre_dect' set but not used [-Wunused-but-set-variable]

While rtl8232 code comments it, perhaps some other driver may use.
So, the better is to keep the code there, allowing to enable it
via r820t config data.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] dib0090: Fix a warning at dib0090_set_EFUSE
Mauro Carvalho Chehab [Thu, 25 Apr 2013 18:30:40 +0000 (15:30 -0300)]
[media] dib0090: Fix a warning at dib0090_set_EFUSE

The check if the values for c, h and n are within the range is
always true, as, if one of this values is out of range, the
previous "if" clauses will default to a value within the
range.

That fixes the following warning:

drivers/media/dvb-frontends/dib0090.c: In function 'dib0090_set_EFUSE':
drivers/media/dvb-frontends/dib0090.c:1545:5: warning: comparison is always true due to limited range of data type [-Wtype-limits]

and makes the code easier to read.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] dib8000: fix a warning
Mauro Carvalho Chehab [Thu, 25 Apr 2013 18:22:20 +0000 (15:22 -0300)]
[media] dib8000: fix a warning

drivers/media/dvb-frontends/dib8000.c: In function 'dib8000_wait_lock':
drivers/media/dvb-frontends/dib8000.c:3972:1: warning: 'value' may be used uninitialized in this function [-Wmaybe-uninitialized]
drivers/media/dvb-frontends/dib8000.c:2419:6: note: 'value' was declared here

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] dib8000: Fix sub-channel range
Mauro Carvalho Chehab [Thu, 25 Apr 2013 14:15:54 +0000 (11:15 -0300)]
[media] dib8000: Fix sub-channel range

isdbt_sb_subchannel is unsigned with 8 bits. So, it will
never be -1. Instead, any value bigger than 13 is invalid.

As is, the current code generates the following warnings:

drivers/media/dvb-frontends/dib8000.c: In function 'dib8000_set_isdbt_common_channel':
drivers/media/dvb-frontends/dib8000.c:2358:3: warning: comparison is always true due to limited range of data type [-Wtype-limits]
drivers/media/dvb-frontends/dib8000.c: In function 'dib8000_tune':
drivers/media/dvb-frontends/dib8000.c:3107:8: warning: comparison is always false due to limited range of data type [-Wtype-limits]
drivers/media/dvb-frontends/dib8000.c:3153:9: warning: comparison is always false due to limited range of data type [-Wtype-limits]
drivers/media/dvb-frontends/dib8000.c:3160:5: warning: comparison is always false

It should also be noticed that ARIB STD-B31, item
"3.15.6.8 Number of segments" at TMCC table defines the
value 15 for unused segment, and 14 as reserved.

So, better to change the check to consider any value
bigger than 13 to mean that sub-channels should be
disabled, fixing the warning and doing the right thing
even if an invalid value is filled by userspace.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] dib8000: store dtv_property_cache in a temp var
Mauro Carvalho Chehab [Thu, 25 Apr 2013 13:51:15 +0000 (10:51 -0300)]
[media] dib8000: store dtv_property_cache in a temp var

dtv_property_cache is used on several places on very long lines.

On all places it is used, a long list of struct reference is done.

Instead of doing it, at the routines where it is used more than once,
replace it by one temporary var. That may help the compiler to
use a better code. It also makes easier to review the code, as the
lines becomes closer to 80 columns, making them a way clearer
to read.

No functional changes.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] dib8000: warning fix: declare internal functions as static
Mauro Carvalho Chehab [Thu, 25 Apr 2013 13:36:56 +0000 (10:36 -0300)]
[media] dib8000: warning fix: declare internal functions as static

drivers/media/dvb-frontends/dib8000.c:2412:5: warning: no previous prototype for 'dib8000_wait_lock' [-Wmissing-prototypes]
drivers/media/dvb-frontends/dib8000.c:2688:5: warning: no previous prototype for 'dib8000_get_symbol_duration' [-Wmissing-prototypes]

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] r820t: quiet gcc warning on n_ring
Fengguang Wu [Sat, 20 Apr 2013 09:02:16 +0000 (06:02 -0300)]
[media] r820t: quiet gcc warning on n_ring

drivers/media/tuners/r820t.c: In function 'r820t_imr':
 drivers/media/tuners/r820t.c:1871:8: warning: 'n_ring' may be used uninitialized in this function [-Wmaybe-uninitialized]
Mauro: This is a FALSE POSITIVE: the loop will always return a value
for n_ring, as the last test will fill it with 15, if the loop fails.

Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] r820t: memory leak in release()
Dan Carpenter [Thu, 18 Apr 2013 18:21:17 +0000 (15:21 -0300)]
[media] r820t: memory leak in release()

I've moved the kfree(fe->tuner_priv) one line earlier, otherwise it is
a no-op.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] r820t: precendence bug in r820t_xtal_check()
Dan Carpenter [Thu, 18 Apr 2013 18:20:40 +0000 (15:20 -0300)]
[media] r820t: precendence bug in r820t_xtal_check()

The test as written is always false.  It looks like the intent was to
test that the bit was not set.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] videodev2.h: Remove the unused old V4L1 buffer types
Mauro Carvalho Chehab [Sat, 20 Apr 2013 15:07:16 +0000 (12:07 -0300)]
[media] videodev2.h: Remove the unused old V4L1 buffer types

Those aren't used anywhere for a long time. Drop it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years agoMerge branch 'topic/cx25821' into patchwork
Mauro Carvalho Chehab [Thu, 25 Apr 2013 13:28:18 +0000 (10:28 -0300)]
Merge branch 'topic/cx25821' into patchwork

* topic/cx25821: (31 commits)
  [media] cx25821: remove cx25821-audio-upstream.c from the Makefile
  [media] cx25821: replace custom ioctls with write()
  [media] cx25821: drop cx25821-video-upstream-ch2.c/h
  [media] cx25821: add output format ioctls
  [media] cx25821: prepare querycap for output support
  [media] cx25821: group all fmt functions together
  [media] cx25821: setup output nodes correctly
  [media] cx25821: remove references to subdevices that aren't there
  [media] cx25821: remove custom ioctls that duplicate v4l2 ioctls
  [media] cx25821: g/s/try/enum_fmt related fixes and cleanups
  [media] cx25821: switch to v4l2_fh, add event and prio handling
  [media] cx25821: replace resource management functions with fh ownership
  [media] cx25821: move vidq from cx25821_fh to cx25821_channel
  [media] cx25821: remove 'type' field from cx25821_fh
  [media] cx25821: use core locking
  [media] cx25821: remove unnecessary debug messages
  [media] cx25821: remove TRUE/FALSE/STATUS_(UN)SUCCESSFUL defines
  [media] cx25821: convert to the control framework
  [media] cx25821: embed video_device, clean up some kernel log spam
  [media] cx25821: remove bogus dependencies
  ...

11 years agoMerge branch 'topic/si476x' into patchwork
Mauro Carvalho Chehab [Thu, 25 Apr 2013 13:26:43 +0000 (10:26 -0300)]
Merge branch 'topic/si476x' into patchwork

* topic/si476x:
  Revert "[media] mfd: Add chip properties handling code for SI476X MFD"
  Revert "[media] mfd: Add the main bulk of core driver for SI476x code"
  Revert "[media] mfd: Add commands abstraction layer for SI476X MFD"
  [media] v4l2: Add a V4L2 driver for SI476X MFD

11 years agoMerge branch 'topic/r820t' into patchwork
Mauro Carvalho Chehab [Thu, 25 Apr 2013 13:26:21 +0000 (10:26 -0300)]
Merge branch 'topic/r820t' into patchwork

* topic/r820t: (31 commits)
  [media] r820t: Don't divide the IF by two
  [media] r820t: disable auto gain/VGA setting
  [media] rtl2832: Fix IF calculus
  [media] r820t: put it into automatic gain mode
  [media] r820t: Fix hp_cor filter mask
  [media] r820t: fix PLL calculus
  [media] r820t: Don't put it in standby if not initialized yet
  [media] r820t: avoid rewrite all regs when not needed
  [media] r820t: Allow disabling IMR callibration
  [media] r820t: add a commented code for GPIO
  [media] r820t: add IMR calibrate code
  [media] r820t: proper initialize the PLL register
  [media] r820t: use usleep_range()
  [media] r820t: fix prefix of the r820t_read() function
  [media] r820t: split the function that read cached regs
  [media] r820t: better report signal strength
  [media] r820t: add support for diplexer
  [media] r820t: Show the read data in the bit-reversed order
  [media] r820t: use the second table for 7MHz
  [media] r820t: Invert bits for read ops
  ...

11 years ago[media] anysee: Grammar s/report the/report to/
Geert Uytterhoeven [Wed, 24 Apr 2013 10:36:46 +0000 (07:36 -0300)]
[media] anysee: Grammar s/report the/report to/

[mchehab@redhat.com: Fix a merge conflict]
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] anysee: Initialize ret = 0 in anysee_frontend_attach()
Geert Uytterhoeven [Wed, 24 Apr 2013 10:36:45 +0000 (07:36 -0300)]
[media] anysee: Initialize ret = 0 in anysee_frontend_attach()

drivers/media/usb/dvb-usb-v2/anysee.c: In function ‘anysee_frontend_attach’:
drivers/media/usb/dvb-usb-v2/anysee.c:641: warning: ‘ret’ may be used uninitialized in this function
And gcc is right (see the ANYSEE_HW_507T case), so initialize ret to zero
to fix this.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] media: videobuf2: fix the length check for mmap
Mauro Carvalho Chehab [Fri, 19 Apr 2013 10:18:01 +0000 (07:18 -0300)]
[media] media: videobuf2: fix the length check for mmap

Memory maps typically require that the buffer size to be page
aligned. Currently, two memops drivers do such alignment
internally, but videobuf-vmalloc doesn't.
Also, the buffer overflow check doesn't take it into account.
So, instead of doing it at each memops driver, enforce it at
VB2 core.

Reported-by: Prabhakar lad <prabhakar.csengg@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] em28xx: save isoc endpoint number for DVB only if endpoint has alt settings...
Frank Schaefer [Mon, 8 Apr 2013 16:06:59 +0000 (13:06 -0300)]
[media] em28xx: save isoc endpoint number for DVB only if endpoint has alt settings with xMaxPacketSize != 0

X-Patchwork-Delegate: mchehab@redhat.com
In addition to commit 72cc9ba3 "em28xx: ignore isoc DVB USB endpoints with
wMaxPacketSize = 0 bytes for all alt settings" we should not save the endpoint
number of the isoc DVB endpoint before it has been validated.
While the current code works fine, dev->dvb_ep_isoc != 0 could be interpreted
as indicator that the device provides DVB support.

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] videobuf-dma-contig: remove support for cached mem
Mauro Carvalho Chehab [Wed, 17 Apr 2013 11:22:15 +0000 (08:22 -0300)]
[media] videobuf-dma-contig: remove support for cached mem

videobuf_queue_dma_contig_init_cached() is not used anywhere.
Drop support for it, cleaning up the code a little bit.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] mem2mem_testdev: set timestamp_type and add debug param
Hans Verkuil [Wed, 17 Apr 2013 06:04:10 +0000 (03:04 -0300)]
[media] mem2mem_testdev: set timestamp_type and add debug param

While testing v4l2-ctl I noticed that this m2m driver didn't set timestamp_type
and that it spammed the kernel log with debug messages. Set timestamp_type
correctly and add debug module option to enable debug messages.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] mx2-emmaprp: Add copy time stamp handling
Kamil Debski [Thu, 25 Apr 2013 10:21:24 +0000 (07:21 -0300)]
[media] mx2-emmaprp: Add copy time stamp handling

Since the introduction of the timestamp_type field, it is necessary that
the driver chooses which type it will use. This patch adds support for
the timestamp_type.

Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] m2m-deinterlace: Add copy time stamp handling
Kamil Debski [Wed, 24 Apr 2013 13:58:47 +0000 (10:58 -0300)]
[media] m2m-deinterlace: Add copy time stamp handling

Since the introduction of the timestamp_type field, it is necessary that
the driver chooses which type it will use. This patch adds support for
the timestamp_type.

Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] exynos-gsc: Add copy time stamp handling
Kamil Debski [Wed, 24 Apr 2013 13:50:55 +0000 (10:50 -0300)]
[media] exynos-gsc: Add copy time stamp handling

Since the introduction of the timestamp_type field, it is necessary that
the driver chooses which type it will use. This patch adds support for
the timestamp_type.

Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] coda: Add copy time stamp handling
Kamil Debski [Wed, 24 Apr 2013 13:38:24 +0000 (10:38 -0300)]
[media] coda: Add copy time stamp handling

Since the introduction of the timestamp_type field, it is necessary that
the driver chooses which type it will use. This patch adds support for
the timestamp_type.

Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] s5p-mfc: Optimize copy time stamp handling
Kamil Debski [Wed, 24 Apr 2013 13:31:05 +0000 (10:31 -0300)]
[media] s5p-mfc: Optimize copy time stamp handling

For the sake of simplicity and readability memcpy was replaced with
assignment.

Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] s5p-jpeg: Add copy time stamp handling
Kamil Debski [Wed, 24 Apr 2013 13:08:02 +0000 (10:08 -0300)]
[media] s5p-jpeg: Add copy time stamp handling

Since the introduction of the timestamp_type field, it is necessary that
the driver chooses which type it will use. This patch adds support for
the timestamp_type.

Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] s5p-g2d: Add copy time stamp handling
Kamil Debski [Wed, 24 Apr 2013 12:34:03 +0000 (09:34 -0300)]
[media] s5p-g2d: Add copy time stamp handling

Since the introduction of the timestamp_type field, it is necessary that
the driver chooses which type it will use. This patch adds support for
the timestamp_type.

Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] exynos4-is: Copy timestamps from M2M OUTPUT to CAPTURE buffer queue
Sylwester Nawrocki [Wed, 24 Apr 2013 16:07:49 +0000 (13:07 -0300)]
[media] exynos4-is: Copy timestamps from M2M OUTPUT to CAPTURE buffer queue

Add copying of buffer timestamps and set the timestamp_type to
V4L2_BUF_FLAG_TIMESTAMP_COPY to avoid warnings about UNDEFINED
timestamp type like:
WARNING: at drivers/media/v4l2-core/videobuf2-core.c:2042 vb2_queue_init+0xe0/0x18c()
Modules linked in:
[<c0016ef0>] (unwind_backtrace+0x0/0x13c) from [<c0029b3c>] (warn_slowpath_common+0x54/0x64)
[<c0029b3c>] (warn_slowpath_common+0x54/0x64) from [<c0029b68>] (warn_slowpath_null+0x1c/0x24)
[<c0029b68>] (warn_slowpath_null+0x1c/0x24) from [<c03b7018>] (vb2_queue_init+0xe0/0x18c)
[<c03b7018>] (vb2_queue_init+0xe0/0x18c) from [<c03b4e08>] (v4l2_m2m_ctx_init+0xa0/0xc4)
[<c03b4e08>] (v4l2_m2m_ctx_init+0xa0/0xc4) from [<c03ca6c4>] (fimc_m2m_open+0x130/0x1f8)
[<c03ca6c4>] (fimc_m2m_open+0x130/0x1f8) from [<c03a5dd4>] (v4l2_open+0xac/0xe8)
[<c03a5dd4>] (v4l2_open+0xac/0xe8) from [<c0113920>] (chrdev_open+0x9c/0x158)
[<c0113920>] (chrdev_open+0x9c/0x158) from [<c010e488>] (do_dentry_open+0x1f8/0x280)
[<c010e488>] (do_dentry_open+0x1f8/0x280) from [<c010e600>] (finish_open+0x34/0x50)
[<c010e600>] (finish_open+0x34/0x50) from [<c011cc58>] (do_last+0x5bc/0xc00)
[<c011cc58>] (do_last+0x5bc/0xc00) from [<c011d34c>] (path_openat+0xb0/0x484)
[<c011d34c>] (path_openat+0xb0/0x484) from [<c011d824>] (do_filp_open+0x30/0x84)
[<c011d824>] (do_filp_open+0x30/0x84) from [<c010e0f8>] (do_sys_open+0xe8/0x170)
[<c010e0f8>] (do_sys_open+0xe8/0x170) from [<c000f040>] (ret_fast_syscall+0x0/0x30)

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] exynos4-is: Fix TRY format propagation at MIPI-CSIS subdev
Sylwester Nawrocki [Tue, 23 Apr 2013 15:40:24 +0000 (12:40 -0300)]
[media] exynos4-is: Fix TRY format propagation at MIPI-CSIS subdev

Ensure TRY format is propagated from the sink to source pad.
The format at both pads is always same so the TRY format buffer
for pad 0 is used to hold format for both pads.
While at it remove redundant fmt->pad checking.

Reported-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] exynos4-is: Fix driver name reported in vidioc_querycap
Sylwester Nawrocki [Tue, 23 Apr 2013 14:36:04 +0000 (11:36 -0300)]
[media] exynos4-is: Fix driver name reported in vidioc_querycap

Originally struct v4l2_capability driver and card name was filled
with name of the platform device. After switching to the device tree
the device names have changed and now are 4 different driver names
reported, depending on the video device opened. So instead of e.g.
"exynos4-fimc" there is now one of: 11800000.fimc, 11810000.fimc,
11820000.fimc, 11830000.fimc.
Fix this by using dev->driver_name, rather than platform device name.
A common vidioc_querycap function is created for both M2M and capture
video node.
This fixes any breakage at user space should any application/library
rely on the driver's name.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] s5p-mfc: fix error return code in s5p_mfc_probe()
Wei Yongjun [Thu, 18 Apr 2013 02:18:19 +0000 (23:18 -0300)]
[media] s5p-mfc: fix error return code in s5p_mfc_probe()

Fix to return a negative error code from the error handling
case instead of 0, as returned elsewhere in this function.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] exynos4-is: Fix runtime PM handling on fimc-is probe error path
Sylwester Nawrocki [Thu, 18 Apr 2013 17:26:19 +0000 (14:26 -0300)]
[media] exynos4-is: Fix runtime PM handling on fimc-is probe error path

Ensure there is no unbalanced pm_runtime_put().

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] exynos4-is: Change function call order in fimc_is_module_exit()
Sylwester Nawrocki [Thu, 18 Apr 2013 17:18:22 +0000 (14:18 -0300)]
[media] exynos4-is: Change function call order in fimc_is_module_exit()

Due to hardware dependencies (clocks/power domain) the I2C bus
controller needs to be unregistered before fimc-is.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] exynos4-is: Remove debugfs entries properly
Sylwester Nawrocki [Thu, 18 Apr 2013 17:10:02 +0000 (14:10 -0300)]
[media] exynos4-is: Remove debugfs entries properly

Ensure both debugfs: fimc_is directory and the fw_log file
are properly removed in the driver cleanup sequence.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] exynos4-is: Remove redundant module_put() for MIPI-CSIS module
Sylwester Nawrocki [Thu, 18 Apr 2013 16:49:23 +0000 (13:49 -0300)]
[media] exynos4-is: Remove redundant module_put() for MIPI-CSIS module

Currently there is unbalanced module_put() on the s5p-csis module
which prevents it from being unloaded. The subdev's owner module
has reference count decremented in v4l2_device_unregister_subdev()
so just remove this erroneous call.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] exynos4-is: Set fimc-lite subdev owner module
Sylwester Nawrocki [Thu, 18 Apr 2013 16:40:42 +0000 (13:40 -0300)]
[media] exynos4-is: Set fimc-lite subdev owner module

The FIMC-LITE.n subdevs have currently sd->owner field not set,
the exynos-fimc-lite module can be removed at any time, regardless
it is in use by other modules. When this module is unloaded the
kernel can crash easily by accessing video or media device nodes.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] exynos4-is: Unregister fimc-is subdevs from the media device properly
Sylwester Nawrocki [Thu, 18 Apr 2013 12:05:54 +0000 (09:05 -0300)]
[media] exynos4-is: Unregister fimc-is subdevs from the media device properly

Add missing v4l2_device_unregister_subdev() call for the FIMC-IS subdevs
(currently there is only the FIMC-IS-ISP subdev) so corresponding resources
are properly freed upon the media device driver module removal.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyugmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] exynos4-is: Don't overwrite subdevdata in the fimc-is sensor driver
Sylwester Nawrocki [Thu, 18 Apr 2013 12:00:45 +0000 (09:00 -0300)]
[media] exynos4-is: Don't overwrite subdevdata in the fimc-is sensor driver

It's an I2C client driver and it must not overwrite the struct v4l2_subdev
dev_priv field, which is used by the v4l2 core to store a pointer to
struct i2c_client.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] exynos4-is: Fix regulator/gpio resource releasing on the driver removal
Sylwester Nawrocki [Thu, 18 Apr 2013 11:55:23 +0000 (08:55 -0300)]
[media] exynos4-is: Fix regulator/gpio resource releasing on the driver removal

Remove regulator_bulk_free() calls as devm_regulator_bulk_get() function
is used to get the regulators so those will be freed automatically while
the driver is removed.
Missing gpio free is fixed by requesting a gpio with the devm_* API.
All that is done now in the I2C client driver remove() callback is the
media entity cleanup call.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] exynos4-is: Fix initialization of subdev 'flags' field
Sylwester Nawrocki [Thu, 18 Apr 2013 11:49:54 +0000 (08:49 -0300)]
[media] exynos4-is: Fix initialization of subdev 'flags' field

Ensure the value of struct v4l2_subdev::flags field as set
in v4l2_subdev_init() is preserved when initializing it in
the subdev drivers.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] exynos4-is: Remove redundant MODULE_DEVICE_TABLE entries
Sylwester Nawrocki [Tue, 16 Apr 2013 16:15:25 +0000 (13:15 -0300)]
[media] exynos4-is: Remove redundant MODULE_DEVICE_TABLE entries

Remove unneeded MODULE_DEVICE_TABLE(of,...) instances from files that
are linked into same module. This fixes following error when building
as a module:
LD [M]  drivers/media/platform/exynos4-is/s5p-fimc.o
drivers/media/platform/exynos4-is/fimc-is-sensor.o: In function `.LANCHOR1':
fimc-is-sensor.c:(.rodata+0x48): multiple definition of `__mod_of_device_table'
drivers/media/platform/exynos4-is/fimc-is.o:fimc-is.c:(.rodata+0x174): first defined here
drivers/media/platform/exynos4-is/fimc-is-i2c.o:(.rodata+0x5c): multiple definition of `__mod_of_device_table'
drivers/media/platform/exynos4-is/fimc-is.o:fimc-is.c:(.rodata+0x174): first defined here
make[4]: *** [drivers/media/platform/exynos4-is/exynos-fimc-is.o] Error 1
Also remove exporting fimc_is_(un)register_i2c_driver functions, it
is not needed since these functions should be called only from our
module.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] s5c73m3: Add missing subdev .unregistered callback
Sylwester Nawrocki [Thu, 18 Apr 2013 17:34:05 +0000 (14:34 -0300)]
[media] s5c73m3: Add missing subdev .unregistered callback

This is needed to free any resources requested in
the .registered subdev op.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] s5c73m3: Fix remove() callback to free requested resources
Sylwester Nawrocki [Wed, 17 Apr 2013 18:03:34 +0000 (15:03 -0300)]
[media] s5c73m3: Fix remove() callback to free requested resources

Make sure v4l2_device_unregister_subdev() is called for both:
oif and sensor subdev and both media entities are freed on
driver removal.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] exynos4-is: Convert index variable to signed
Sachin Kamat [Tue, 16 Apr 2013 06:02:20 +0000 (03:02 -0300)]
[media] exynos4-is: Convert index variable to signed

index variable is used to check the validity of the data by
testing for negative values. Hence make it signed.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years ago[media] exynos4-is: Fix potential null pointer dereferencing
Sachin Kamat [Tue, 16 Apr 2013 06:02:19 +0000 (03:02 -0300)]
[media] exynos4-is: Fix potential null pointer dereferencing

If fimc->drv_data is NULL, then fimc->drv_data->num_entities would
cause NULL pointer dereferencing. Hence remove it from print statement.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc
Linus Torvalds [Thu, 25 Apr 2013 00:10:18 +0000 (17:10 -0700)]
Merge git://git./linux/kernel/git/davem/sparc

Pull sparc fix from David Miller:
 "Brown paper bag fix for sparc64"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc64: Fix missing put_cpu_var() in tlb_batch_add_one() when not batching.

11 years agoMerge tag 'gpio-v3.9-lastminute' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Thu, 25 Apr 2013 00:01:58 +0000 (17:01 -0700)]
Merge tag 'gpio-v3.9-lastminute' of git://git./linux/kernel/git/linusw/linux-gpio

Pull gpi fix from Linus Walleij:
 "This is a last minute revert for the GPIO tree, as Mike Dunn noticed
  breakage on some older PXA machines due to moving PXA GPIO initcalls
  to the module_init initlevel"

* tag 'gpio-v3.9-lastminute' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  Revert "gpio: pxa: set initcall level to module init"

11 years agosparc64: Fix missing put_cpu_var() in tlb_batch_add_one() when not batching.
David S. Miller [Wed, 24 Apr 2013 23:52:18 +0000 (16:52 -0700)]
sparc64: Fix missing put_cpu_var() in tlb_batch_add_one() when not batching.

Reported-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: David S. Miller <davem@davemloft.net>