dt-bindings: clock: qcom, dispcc-sm6125: Require GCC PLL0 DIV clock

The "gcc_disp_gpll0_div_clk_src" clock is consumed by the driver, will
be passed from DT, and should be required by the bindings.

Fixes: 8397c9c0c26b ("dt-bindings: clock: add QCOM SM6125 display clock bindings")
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/548966/
Link: https://lore.kernel.org/r/20230723-sm6125-dpu-v4-5-a3f287dd6c07@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: display/msm: Remove DSI1 ports from SM6350/SM6375 example

Both SM6350 and SM6375 support only a single DSI link, and don't have a
corresponding dsi1 node in DTS.  Their examples should not suggest an
output interface port on the display-controller node to this inexistant
DSI host, with a dsi1_in label reference that doesn't exist in the
example either.

Fixes: 3b7502b0c205 ("dt-bindings: display/msm: Add SM6350 MDSS")
Fixes: 2a5c1021bc77 ("dt-bindings: display/msm: Add SM6375 MDSS")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Acked-by: Rob Herring <robh@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/548961/
Link: https://lore.kernel.org/r/20230723-sm6125-dpu-v4-4-a3f287dd6c07@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dsi: Drop unused regulators from QCM2290 14nm DSI PHY config

The regulator setup was likely copied from other SoCs by mistake.  Just
like SM6125 the DSI PHY on this platform is not getting power from a
regulator but from the MX power domain.

Fixes: 572e9fd6d14a ("drm/msm/dsi: Add phy configuration for QCM2290")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/548959/
Link: https://lore.kernel.org/r/20230723-sm6125-dpu-v4-1-a3f287dd6c07@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: drop DPU_INTF_DATA_COMPRESS from dpu catalog

Now that all usages of DPU_INTF_DATA_COMPRESS have been replaced
with the dpu core's major revision lets drop DPU_INTF_DATA_COMPRESS
from the catalog completely.

Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/546808/
Link: https://lore.kernel.org/r/20230712012003.2212-6-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: rename enable_compression() to program_intf_cmd_cfg()

Rename the intf's enable_compression() op to program_intf_cmd_cfg()
and allow it to accept a struct intf_cmd_mode_cfg to program
all the bits at once. This can be re-used by widebus later on as
well as it touches the same register.

changes in v5:
- rename struct intf_cmd_mode_cfg to dpu_hw_intf_cmd_mode_cfg
- remove couple of comments

Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/546806/
Link: https://lore.kernel.org/r/20230712012003.2212-5-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: rename all hw_intf structs to have dpu_hw prefix

dpu_hw_intf has a few instances of structs which do not have
the dpu_hw prefix. Lets fix this by renaming those structs
and updating the usage of those accordingly.

Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/546805/
Link: https://lore.kernel.org/r/20230712012003.2212-4-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: use dpu core's major version to enable data compress

Instead of using a feature bit to decide whether to enable data
compress or not for DSC use-cases, use dpu core's major version
instead by assigning the enable_compression op based on the
dpu core's major version.

To make this possible pass the struct dpu_mdss_version to
dpu_hw_intf_init().

This will avoid defining feature bits for every bit level details of
registers.

changes in v5:
- none

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/546803/
Link: https://lore.kernel.org/r/20230712012003.2212-3-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: re-introduce dpu core revision to the catalog

Introduce the dpu core revision back as an entry to the catalog so that
we can just use dpu revision checks and enable those bits which
should be enabled unconditionally and not controlled by a catalog
and also simplify the changes to do something like:

if (dpu_core_revision > xxxxx && dpu_core_revision < xxxxx)
   enable the bit;

changes in v5:
- fix the commit text to remove instances of DPU_HW_VER

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/546801/
Link: https://lore.kernel.org/r/20230712012003.2212-2-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dsi: Enable BURST_MODE for command mode for DSI 6G v1.3+

During a frame transfer in command mode, there could be frequent
LP11 <-> HS transitions when multiple DCS commands are sent mid-frame or
if the DSI controller is running on slow clock and is throttled. To
minimize frame latency due to these transitions, it is recommended to
send the frame in a single burst.

This feature is supported for DSI 6G 1.3 and above, thus enable burst
mode if supported.

Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/544551/
Link: https://lore.kernel.org/r/20230608-b4-add-burst-mode-v2-1-2ff468457d46@quicinc.com
[DB: fixed indentation]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: display: msm: dp-controller: document SM8250 compatible

It looks like DP controlled on SM8250 is the same as DP controller on
SM8350. Use the SM8350 compatible as fallback for SM8250.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/546242/
Link: https://lore.kernel.org/r/20230709041926.4052245-2-dmitry.baryshkov@linaro.org

drm/msm/dpu: Update dev core dump to dump registers of sub-blocks

Currently, the device core dump mechanism does not dump registers of
sub-blocks within the DSPP, SSPP, DSC, and PINGPONG blocks. Edit
dpu_kms_mdp_snapshot function to account for sub-blocks.

Signed-off-by: Ryan McCann <quic_rmccann@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/546192/
Link: https://lore.kernel.org/r/20230622-devcoredump_patch-v5-6-67e8b66c4723@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: Refactor printing of main blocks in device core dump

Currently, the names of main blocks are hardcoded into the
msm_disp_snapshot_add_block function rather than using the name that
already exists in the catalog. Change this to take the name directly from
the catalog instead of hardcoding it.

Signed-off-by: Ryan McCann <quic_rmccann@quicinc.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/546194/
Link: https://lore.kernel.org/r/20230622-devcoredump_patch-v5-5-67e8b66c4723@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: Remove redundant prefix/suffix in name of sub-blocks

For a device core dump, the registers of sub-blocks are printed under a
title formatted as <mainBlkName_sblkName>. For example, the csc sub-block
for an SSPP main block "sspp_0" would be printed "sspp_0_sspp_csc0". The
title is clearly redundant due to the duplicate "sspp" and "0" that exist
in both the mainBlkName and sblkName. To eliminate this redundancy, remove
the secondary "sspp" and "0" that exist in the sub-block name by
elimanting the "sspp_" prefix and the concatenation of "num" that results
in the redundant "0" suffix. Remove num parameter altogether from relevant
macros as a consequence of it no longer being used.

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Ryan McCann <quic_rmccann@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/546198/
Link: https://lore.kernel.org/r/20230622-devcoredump_patch-v5-4-67e8b66c4723@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: Define names for unnamed sblks

Some sub-blocks in the hw catalog have not been given a name, so when the
registers from that block are dumped, there is no name to reference.
Define names for relevant sub-blocks to fix this.

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Ryan McCann <quic_rmccann@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/546199/
Link: https://lore.kernel.org/r/20230622-devcoredump_patch-v5-3-67e8b66c4723@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: Drop unused num argument from relevant macros

Drop unused parameter "num" from VIG_SBLK_NOSCALE and DMA sub-block
macros. Update calls to relevant macros to reflect change.

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Ryan McCann <quic_rmccann@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/546196/
Link: https://lore.kernel.org/r/20230622-devcoredump_patch-v5-2-67e8b66c4723@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm: Update dev core dump to not print backwards

Device core dump add block method adds hardware blocks to dumping queue
with stack behavior which causes the hardware blocks to be printed in
reverse order. Change the addition to dumping queue data structure
from "list_add" to "list_add_tail" for FIFO queue behavior.

Fixes: 98659487b845 ("drm/msm: add support to take dpu snapshot")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Ryan McCann <quic_rmccann@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/546200/
Link: https://lore.kernel.org/r/20230622-devcoredump_patch-v5-1-67e8b66c4723@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: drop empty features mask INTF_SDM845_MASK

The INTF_SDM845_MASK features mask is zero. Drop it completely.

Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Tested-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/545386/
Link: https://lore.kernel.org/r/20230704022136.130522-20-dmitry.baryshkov@linaro.org

drm/msm/dpu: drop empty features mask MERGE_3D_SM8150_MASK

The MERGE_3D_SM8150_MASK features mask is zero. Drop it completely.

Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Tested-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/545384/
Link: https://lore.kernel.org/r/20230704022136.130522-19-dmitry.baryshkov@linaro.org

drm/msm/dpu: inline INTF_BLK and INTF_BLK_DSI_TE macros

To simplify making changes to the hardware block definitions, expand
corresponding macros. This way making all the changes are more obvious
and visible in the source files.

Tested-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/545378/
Link: https://lore.kernel.org/r/20230704022136.130522-18-dmitry.baryshkov@linaro.org

drm/msm/dpu: inline WB_BLK macros

To simplify making changes to the hardware block definitions, expand
corresponding macros. This way making all the changes are more obvious
and visible in the source files.

Tested-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/545380/
Link: https://lore.kernel.org/r/20230704022136.130522-17-dmitry.baryshkov@linaro.org

drm/msm/dpu: inline various PP_BLK_* macros

To simplify making changes to the hardware block definitions, expand
corresponding macros. This way making all the changes are more obvious
and visible in the source files.

Tested-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/545371/
Link: https://lore.kernel.org/r/20230704022136.130522-16-dmitry.baryshkov@linaro.org

drm/msm/dpu: inline MERGE_3D_BLK macros

To simplify making changes to the hardware block definitions, expand
corresponding macros. This way making all the changes are more obvious
and visible in the source files.

Tested-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/545382/
Link: https://lore.kernel.org/r/20230704022136.130522-15-dmitry.baryshkov@linaro.org

drm/msm/dpu: inline DSC_BLK and DSC_BLK_1_2 macros

To simplify making changes to the hardware block definitions, expand
corresponding macros. This way making all the changes are more obvious
and visible in the source files.

Tested-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/545370/
Link: https://lore.kernel.org/r/20230704022136.130522-14-dmitry.baryshkov@linaro.org

drm/msm/dpu: inline LM_BLK macros

To simplify making changes to the hardware block definitions, expand
corresponding macros. This way making all the changes are more obvious
and visible in the source files.

Tested-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/545362/
Link: https://lore.kernel.org/r/20230704022136.130522-13-dmitry.baryshkov@linaro.org

drm/msm/dpu: inline DSPP_BLK macros

To simplify making changes to the hardware block definitions, expand
corresponding macros. This way making all the changes are more obvious
and visible in the source files.

Tested-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/545359/
Link: https://lore.kernel.org/r/20230704022136.130522-12-dmitry.baryshkov@linaro.org

drm/msm/dpu: inline SSPP_BLK macros

To simplify making changes to the hardware block definitions, expand
corresponding macros. This way making all the changes are more obvious
and visible in the source files.

Tested-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/545377/
Link: https://lore.kernel.org/r/20230704022136.130522-11-dmitry.baryshkov@linaro.org

drm/msm/dpu: correct indentation for CTL definitions

Shift dpu_ctl_cfg contents to correct the indentation of CTL blocks.
This is done in preparation to expanding the rest of hardware block
defines, so that all blocks have similar indentation.

Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Tested-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/545374/
Link: https://lore.kernel.org/r/20230704022136.130522-10-dmitry.baryshkov@linaro.org

drm/msm/dpu: drop zero features from dpu_ctl_cfg data

Drop useless zero assignments to the dpu_ctl_cfg::features field.

Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Tested-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/545366/
Link: https://lore.kernel.org/r/20230704022136.130522-9-dmitry.baryshkov@linaro.org

drm/msm/dpu: drop zero features from dpu_mdp_cfg data

Drop useless zero assignments to the dpu_mdp_cfg::features field.

Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Tested-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/545369/
Link: https://lore.kernel.org/r/20230704022136.130522-8-dmitry.baryshkov@linaro.org

drm/msm/dpu: expand .clk_ctrls definitions

Use more standard initialisation for .clk_ctrls definitions. Define a
single .clk_ctrls field and use array init inside.

Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Tested-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/545368/
Link: https://lore.kernel.org/r/20230704022136.130522-7-dmitry.baryshkov@linaro.org

drm/msm/dpu: drop enum dpu_mdp and MDP_TOP value

Since there is always just a single MDP_TOP instance, drop the enum
dpu_mdp and corresponding index value.

Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Tested-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/545357/
Link: https://lore.kernel.org/r/20230704022136.130522-6-dmitry.baryshkov@linaro.org

drm/msm/dpu: drop dpu_mdss_cfg::mdp_count field

There is always a single MDP TOP block. Drop the mdp_count field and
stop declaring dpu_mdp_cfg instances as arrays.

Tested-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/545355/
Link: https://lore.kernel.org/r/20230704022136.130522-5-dmitry.baryshkov@linaro.org

drm/msm/dpu: simplify peer LM handling

For each LM there is at max 1 peer LM. Thus there is no need to have a
mask for the peer LM enumeration. Change that to have an ID of the peer LM.

Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Tested-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/545352/
Link: https://lore.kernel.org/r/20230704022136.130522-4-dmitry.baryshkov@linaro.org

drm/msm/dpu: always use MSM_DP/DSI_CONTROLLER_n

In several catalog entries we did not use existing MSM_DP_CONTROLLER_n
constants. Fill them in. Also use freshly defined MSM_DSI_CONTROLLER_n
for DSI interfaces.

Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Tested-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/545353/
Link: https://lore.kernel.org/r/20230704022136.130522-3-dmitry.baryshkov@linaro.org

drm/msm: enumerate DSI interfaces

Follow the DP example and define MSM_DSI_CONTROLLER_n enumeration.

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Tested-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/545351/
Link: https://lore.kernel.org/r/20230704022136.130522-2-dmitry.baryshkov@linaro.org

drm/msm/dsi: Hook up refgen regulator

Consume the refgen supply on configurations that may use it.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/545333/
Link: https://lore.kernel.org/r/20230628-topic-refgen-v3-4-9fbf0e605d23@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: display/msm: dsi-controller-main: Allow refgen-supply

DSI host needs REFGEN to be enabled (if it's present on a given platform).
Allow consuming it.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/545335/
Link: https://lore.kernel.org/r/20230628-topic-refgen-v3-3-9fbf0e605d23@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: display: msm: sm8550-mdss: document displayport controller subnode

Document the optional displayport controller subnode of the SM8550 MDSS.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/544002/
Link: https://lore.kernel.org/r/20230621-topic-sm8x50-upstream-mdss-bindings-dp-subnode-v2-3-733ed383f6b6@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: display: msm: sm8450-mdss: document displayport controller subnode

Document the optional displayport controller subnode of the SM8450 MDSS.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/544000/
Link: https://lore.kernel.org/r/20230621-topic-sm8x50-upstream-mdss-bindings-dp-subnode-v2-2-733ed383f6b6@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: display: msm: sm8350-mdss: document displayport controller subnode

Document the optional displayport controller subnode of the SM8350 MDSS.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/543999/
Link: https://lore.kernel.org/r/20230621-topic-sm8x50-upstream-mdss-bindings-dp-subnode-v2-1-733ed383f6b6@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: remove struct drm_dsc_config from struct msm_display_info

Since struct drm_dsc_config is stored at atomic_enable() instead
of display setup time during boot up, saving struct drm_dsc_config
at struct msm_display_info is not necessary. Lets drop the dsc member
from struct msm_display_info.

Changes in v4:
-- fix "Since" at commit text

Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/543866/
Link: https://lore.kernel.org/r/1687454686-10340-3-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: retrieve DSI DSC struct through priv->dsi[0]

Currently struct drm_dsc_config for DSI is populated at display
setup during system boot up. This mechanism works fine with
embedded display but not for pluggable displays as the
struct drm_dsc_config will become stale once external display
is unplugged.

In preparation of adding support for DP DSC support
move storing of DSI DSC struct to atomic_enable() so that same
mechanism will work for both embedded display and pluggable
displays.

Changes in v4:
-- fix checkpatch.pl warning

Changes in v5:
-- delete dpu_encoder_get_dsc_config() from atomic_mode_set

Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/543867/
Link: https://lore.kernel.org/r/1687454686-10340-2-git-send-email-quic_khsieh@quicinc.com
[DB: fixed commit message]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm: stop storing the array of CRTCs in struct msm_drm_private

The array of CRTC in the struct msm_drm_private duplicates a list of
CRTCs in the drm_device. Drop it and use the existing list for CRTC
enumeration.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/538068/
Link: https://lore.kernel.org/r/20230519150734.3879916-1-dmitry.baryshkov@linaro.org

drm/msm/dpu1: Rename sm8150_dspp_blk to sdm845_dspp_blk

SDM845 was the first SoC to include both PCC v4 and GC v1.8.
We don't currently support any other blocks but the common config
for these two can be reused for a large amount of SoCs.

Rename it to indicate the origin of that combo.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/533003/
Link: https://lore.kernel.org/r/20230420-topic-dpu_gc-v1-1-d9d1a5e40917@linaro.org
[DB: also applied to new catalog files]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/a6xx: Add A610 speedbin support

A610 is implemented on at least three SoCs: SM6115 (bengal), SM6125
(trinket) and SM6225 (khaje). Trinket does not support speed binning
(only a single SKU exists) and we don't yet support khaje upstream.
Hence, add a fuse mapping table for bengal to allow for per-chip
frequency limiting.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542780/
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/a6xx: Add A619_holi speedbin support

A619_holi is implemented on at least two SoCs: SM4350 (holi) and SM6375
(blair). This is what seems to be a first occurrence of this happening,
but it's easy to overcome by guarding the SoC-specific fuse values with
of_machine_is_compatible(). Do just that to enable frequency limiting
on these SoCs.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542772/
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/a6xx: Use adreno_is_aXYZ macros in speedbin matching

Before transitioning to using per-SoC and not per-Adreno speedbin
fuse values (need another patchset to land elsewhere), a good
improvement/stopgap solution is to use adreno_is_aXYZ macros in
place of explicit revision matching. Do so to allow differentiating
between A619 and A619_holi.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542777/
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/a6xx: Use "else if" in GPU speedbin rev matching

The GPU can only be one at a time. Turn a series of ifs into if +
elseifs to save some CPU cycles.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542770/
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/a6xx: Fix some A619 tunables

Adreno 619 expects some tunables to be set differently. Make up for it.

Fixes: b7616b5c69e6 ("drm/msm/adreno: Add A619 support")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542782/
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/a6xx: Add A610 support

A610 is one of (if not the) lowest-tier SKUs in the A6XX family. It
features no GMU, as it's implemented solely on SoCs with SMD_RPM.
What's more interesting is that it does not feature a VDDGX line
either, being powered solely by VDDCX and has an unfortunate hardware
quirk that makes its reset line broken - after a couple of assert/
deassert cycles, it will hang for good and will not wake up again.

This GPU requires mesa changes for proper rendering, and lots of them
at that. The command streams are quite far away from any other A6XX
GPU and hence it needs special care. This patch was validated both
by running an (incomplete) downstream mesa with some hacks (frames
rendered correctly, though some instructions made the GPU hangcheck
which is expected - garbage in, garbage out) and by replaying RD
traces captured with the downstream KGSL driver - no crashes there,
ever.

Add support for this GPU on the kernel side, which comes down to
pretty simply adding A612 HWCG tables, altering a few values and
adding a special case for handling the reset line.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542779/
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/a6xx: Add support for A619_holi

A619_holi is a GMU-less variant of the already-supported A619 GPU.
It's present on at least SM4350 (holi) and SM6375 (blair). No mesa
changes are required. Add the required kernel-side support for it.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542775/
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/adreno: Disable has_cached_coherent in GMU wrapper configurations

A610 and A619_holi don't support the feature. Disable it to make the GPU stop
crashing after almost each and every submission - the received data on
the GPU end was simply incomplete in garbled, resulting in almost nothing
being executed properly. Extend the disablement to adreno_has_gmu_wrapper,
as none of the GMU wrapper Adrenos that don't support yet seem to feature it.

Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542774/
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/a6xx: Introduce GMU wrapper support

Some (particularly SMD_RPM, a.k.a non-RPMh) SoCs implement A6XX GPUs
but don't implement the associated GMUs. This is due to the fact that
the GMU directly pokes at RPMh. Sadly, this means we have to take care
of enabling & scaling power rails, clocks and bandwidth ourselves.

Reuse existing Adreno-common code and modify the deeply-GMU-infused
A6XX code to facilitate these GPUs. This involves if-ing out lots
of GMU callbacks and introducing a new type of GMU - GMU wrapper (it's
the actual name that Qualcomm uses in their downstream kernels).

This is essentially a register region which is convenient to model
as a device. We'll use it for managing the GDSCs. The register
layout matches the actual GMU_CX/GX regions on the "real GMU" devices
and lets us reuse quite a bit of gmu_read/write/rmw calls.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542766/
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/a6xx: Move CX GMU power counter enablement to hw_init

Since the introduction of A6xx support, we've been enabling the CX GMU
power counter 0 in a bit of a weird spot. Move it to hw_init so that
GMU wrapper GPUs can reuse the same code paths. As a bonus, this order
makes it easier to compare mainline and downstream register access traces.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542765/
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/a6xx: Extend and explain UBWC config

Rename lower_bit to hbb_lo and explain what it signifies.
Add explanations (wherever possible to other tunables).

Port setting min_access_length, ubwc_mode and hbb_hi from downstream.

Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542764/
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/a6xx: Remove both GBIF and RBBM GBIF halt on hw init

Currently we're only deasserting REG_A6XX_RBBM_GBIF_HALT, but we also
need REG_A6XX_GBIF_HALT to be set to 0.

This is typically done automatically on successful GX collapse, but in
case that fails, we should take care of it.

Also, add a memory barrier to ensure it's gone through before jumping
to further initialization.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542760/
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/a6xx: Add a helper for software-resetting the GPU

Introduce a6xx_gpu_sw_reset() in preparation for adding GMU wrapper
GPUs and reuse it in a6xx_gmu_force_off().

This helper, contrary to the original usage in GMU code paths, adds
a readback+delay sequence to ensure that the reset is never deasserted
too quickly due to e.g. OoO execution going crazy.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542758/
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/a6xx: Improve a6xx_bus_clear_pending_transactions()

Unify the indentation and explain the cryptic 0xF value.

Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542756/
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/a6xx: Move a6xx_bus_clear_pending_transactions to a6xx_gpu

This function is responsible for telling the GPU to halt transactions
on all of its relevant buses, drain them and leave them in a predictable
state, so that the GPU can be e.g. reset cleanly.

Move the function to a6xx_gpu.c, remove the static keyword and add a
prototype in a6xx_gpu.h to accomodate for the move.

Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542762/
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/a6xx: Move force keepalive vote removal to a6xx_gmu_force_off()

As pointed out by Akhil during the review process of GMU wrapper
introduction [1], it makes sense to move this write into the function
that's responsible for forcibly shutting the GMU off.

It is also very convenient to move this to GMU-specific code, so that
it does not have to be guarded by an if-condition to avoid calling it
on GMU wrapper targets.

Move the write to the aforementioned a6xx_gmu_force_off() to achieve
that. No effective functional change.

[1] https://lore.kernel.org/linux-arm-msm/20230501194022.GA18382@akhilpo-linux.qualcomm.com/

Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542752/
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/a6xx: Remove static keyword from sptprac en/disable functions

These two will be reused by at least A619_holi in the non-gmu
paths. Turn them non-static them to make it possible.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542751/
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/adreno: Use adreno_is_revn for A690

The adreno_is_revn rework came at the same time as A690 introduction
and that resulted in it not covering all cases. Fix it.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542754/
Signed-off-by: Rob Clark <robdclark@chromium.org>

dt-bindings: display/msm/gmu: Add GMU wrapper

The "GMU Wrapper" is Qualcomm's name for "let's treat the GPU blocks
we'd normally assign to the GMU as if they were a part of the GMU, even
though they are not". It's a (good) software representation of the GMU_CX
and GMU_GX register spaces within the GPUSS that helps us programatically
treat these de-facto GMU-less parts in a way that's very similar to their
GMU-equipped cousins, massively saving up on code duplication.

The "wrapper" register space was specifically designed to mimic the layout
of a real GMU, though it rather obviously does not have the M3 core et al.

To sum it all up, the GMU wrapper is essentially a register space within
the GPU, which Linux sees as a dumbed-down regular GMU: there's no clocks,
interrupts, multiple reg spaces, iommus and OPP. Document it.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542750/
Signed-off-by: Rob Clark <robdclark@chromium.org>

dt-bindings: display/msm: gpu: Document GMU wrapper-equipped A6xx

The "GMU Wrapper" is Qualcomm's name for "let's treat the GPU blocks
we'd normally assign to the GMU as if they were a part of the GMU, even
though they are not". It's a (good) software representation of the GMU_CX
and GMU_GX register spaces within the GPUSS that helps us programatically
treat these de-facto GMU-less parts in a way that's very similar to their
GMU-equipped cousins, massively saving up on code duplication.

The "wrapper" register space was specifically designed to mimic the layout
of a real GMU, though it rather obviously does not have the M3 core et al.

GMU wrapper-equipped A6xx GPUs require clocks and clock-names to be
specified under the GPU node, just like their older cousins. Account
for that.

Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542748/
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dsi: split dsi_ctrl_config() function

It makes no sense to pass NULL parameters to dsi_ctrl_config() in the
disable case. Split dsi_ctrl_config() into enable and disable parts and
drop unused params.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/542559/
Link: https://lore.kernel.org/r/20230614224402.296825-2-dmitry.baryshkov@linaro.org

drm/msm/dsi: dsi_host: drop unused clocks

Several source clocks are not used anymore, so stop handling them.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/542558/
Link: https://lore.kernel.org/r/20230614224402.296825-1-dmitry.baryshkov@linaro.org

drm/msm/dpu: remove unused INTF_NONE interfaces

sm6115, sm6375 and qcm2290 do not have INTF_0. Drop corresponding
interface definitions.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/542180/
Link: https://lore.kernel.org/r/20230613001004.3426676-4-dmitry.baryshkov@linaro.org

drm/msm/dpu: correct MERGE_3D length

Each MERGE_3D block has just two registers. Correct the block length
accordingly.

Fixes: 4369c93cf36b ("drm/msm/dpu: initial support for merge3D hardware block")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/542177/
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Link: https://lore.kernel.org/r/20230613001004.3426676-3-dmitry.baryshkov@linaro.org

drm/msm/dpu: fix sc7280 and sc7180 PINGPONG done interrupts

During IRQ conversion we have lost the PP_DONE interrupts for sc7280
platform. This was left unnoticed, because this interrupt is only used
for CMD outputs and probably no sc7[12]80 systems use DSI CMD panels.

Fixes: 667e9985ee24 ("drm/msm/dpu: replace IRQ lookup with the data in hw catalog")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/542175/
Link: https://lore.kernel.org/r/20230613001004.3426676-2-dmitry.baryshkov@linaro.org

drm/msm/dp: Free resources after unregistering them

The DP component's unbind operation walks through the submodules to
unregister and clean things up. But if the unbind happens because the DP
controller itself is being removed, all the memory for those submodules
has just been freed.

Change the order of these operations to avoid the many use-after-free
that otherwise happens in this code path.

Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support")
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542166/
Link: https://lore.kernel.org/r/20230612220259.1884381-1-quic_bjorande@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dp: Drop aux devices together with DP controller

Using devres to depopulate the aux bus made sure that upon a probe
deferral the EDP panel device would be destroyed and recreated upon next
attempt.

But the struct device which the devres is tied to is the DPUs
(drm_dev->dev), which may be happen after the DP controller is torn
down.

Indications of this can be seen in the commonly seen EDID-hexdump full
of zeros in the log, or the occasional/rare KASAN fault where the
panel's attempt to read the EDID information causes a use after free on
DP resources.

It's tempting to move the devres to the DP controller's struct device,
but the resources used by the device(s) on the aux bus are explicitly
torn down in the error path. The KASAN-reported use-after-free also
remains, as the DP aux "module" explicitly frees its devres-allocated
memory in this code path.

As such, explicitly depopulate the aux bus in the error path, and in the
component unbind path, to avoid these issues.

Fixes: 2b57f726611e ("drm/msm/dp: fix aux-bus EP lifetime")
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/542163/
Link: https://lore.kernel.org/r/20230612220106.1884039-1-quic_bjorande@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm: provide fb_dirty implemenation

Since commit 93e81e38e197 ("drm/fb_helper: Minimize damage-helper
overhead") the drm_fb_helper_funcs::fb_dirty helper is required for
proper dirty/damage processing. The drm/msm driver requires that to
function to let CMD panels to work. Use simplified version of
drm_fbdev_generic_helper_fb_dirty() to fix support for CMD mode panels.

Reported-by: Degdag Mohamed <degdagmohamed@gmail.com>
Fixes: 93e81e38e197 ("drm/fb_helper: Minimize damage-helper overhead")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/542002/
Link: https://lore.kernel.org/r/20230612031616.3620134-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dsi: Remove incorrect references to slice_count

Currently, slice_count is being used to calculate word count and
pkt_per_line. Instead, these values should be calculated using slice per
packet, which is not the same as slice_count.

Slice count represents the number of slices per interface, and its value
will not always match that of slice per packet. For example, it is possible
to have cases where there are multiple slices per interface but the panel
specifies only one slice per packet.

Thus, use the default value of one slice per packet and remove slice_count
from the aforementioned calculations.

Fixes: 08802f515c3c ("drm/msm/dsi: Add support for DSC configuration")
Fixes: bc6b6ff8135c ("drm/msm/dsi: Use DSC slice(s) packet size to compute word count")
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/541965/
Link: https://lore.kernel.org/r/20230405-add-dsc-support-v6-5-95eab864d1b6@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: Set DATA_COMPRESS on command mode for DCE/DSC 1.2

Add a DPU INTF op to set the DCE_DATA_COMPRESS bit to enable the
DCE/DSC 1.2 datapath

Note: For now, this op is called for command mode encoders only. Changes to
set DATA_COMPRESS for video mode encoders will be posted along with DSC
v1.2 support for DP.

Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/541966/
Link: https://lore.kernel.org/r/20230405-add-dsc-support-v6-4-95eab864d1b6@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: Add DPU_INTF_DATA_COMPRESS feature flag for DPU >= 7.0

In DPU 7.x and later, DSC/DCE enablement registers have been moved from
PINGPONG to INTF. Thus, add a DPU_INTF_DATA_COMPRESS feature flag that will
be set if the DATA_COMPRESS register is in the INTF block.

Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/541967/
Link: https://lore.kernel.org/r/20230405-add-dsc-support-v6-3-95eab864d1b6@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dsi: Reduce pclk rate for compression

Adjust the pclk rate to divide hdisplay by the compression ratio when DSC
is enabled.

Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/541972/
Link: https://lore.kernel.org/r/20230405-add-dsc-support-v6-2-95eab864d1b6@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

msm/drm/dsi: Round up DSC hdisplay calculation

Currently, when compression is enabled, hdisplay is reduced via integer
division. This causes issues for modes where the original hdisplay is
not a multiple of 3.

To fix this, use DIV_ROUND_UP to divide hdisplay.

Suggested-by: Marijn Suijten <marijn.suijten@somainline.org>
Fixes: 08802f515c3cf ("drm/msm/dsi: Add support for DSC configuration")
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/541970/
Link: https://lore.kernel.org/r/20230405-add-dsc-support-v6-1-95eab864d1b6@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: add DSC 1.2 hw blocks for relevant chipsets

Add DSC 1.2 hardware blocks to the catalog with necessary sub-block and
feature flag information.  Each display compression engine (DCE) contains
dual DSC encoders so both share same base address but with its own
different sub block address.

changes in v4:
-- delete DPU_DSC_HW_REV_1_1
-- re arrange sc8280xp_dsc[]

changes in v4:
-- fix checkpatch warning

changes in v10:
-- remove hard slice from commit text
-- replace DPU_DSC_NATIVE_422_EN with DPU_DSC_NATIVE_42x_EN
-- change DSC_BLK_1_2 .len from 0x100 to 0x29c

changes in v11:
-- remove comment at DSC_BLK_1_2 marco

Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/539507/
Link: https://lore.kernel.org/r/1685036458-22683-10-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: add support for DSC encoder v1.2 engine

Add support for DSC 1.2 by providing the necessary hooks to program
the DPU DSC 1.2 encoder.

Changes in v3:
-- fixed kernel test rebot report that "__iomem *off" is declared but not
   used at dpu_hw_dsc_config_1_2()
-- unrolling thresh loops

Changes in v4:
-- delete DPU_DSC_HW_REV_1_1
-- delete off and used real register name directly

Changes in v7:
-- replace offset with sblk->enc.base
-- replace ss with slice

Changes in v8:
-- fixed checkpatch warning

Changes in v9:
-- replaced __dsc_calc_ob_max_addr() with __dsc_calc_output_buf_max_addr()
-- replaced variable num_ss with num_softslice
-- remove inline from function  declaration

changes in v10:
-- rewording text of changes in v9
-- replace DPU_DSC_NATIVE_422_EN with DPU_DSC_NATIVE_42x_EN
-- replace drm_dsc_calculate_flatness_det_thresh() with drm_dsc_flatness_det_thresh()

Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/539500/
Link: https://lore.kernel.org/r/1685036458-22683-7-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dsi: update hdisplay calculation for dsi_timing_setup

Currently, hdisplay is being divided by 3 for DSC. However, this
calculation only works for cases where BPP = 8.

Update hdisplay calculation to be bytes_per_line / 3, so that it
accounts for cases where BPP != 8.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/539271/
Link: https://lore.kernel.org/r/20230329-rfc-msm-dsc-helper-v14-9-bafc7be95691@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dsi: Use MSM and DRM DSC helper methods

Use MSM and DRM DSC helper methods to configure DSC for DSI.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/539274/
Link: https://lore.kernel.org/r/20230329-rfc-msm-dsc-helper-v14-8-bafc7be95691@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: Fix slice_last_group_size calculation

Correct the math for slice_last_group_size so that it matches the
calculations downstream.

Fixes: c110cfd1753e ("drm/msm/disp/dpu1: Add support for DSC")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/539269/
Link: https://lore.kernel.org/r/20230329-rfc-msm-dsc-helper-v14-7-bafc7be95691@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: Use fixed DRM DSC helper for det_thresh_flatness

The current dpu_hw_dsc calculation for det_thresh_flatness does not
match the downstream calculation or the DSC spec.

Use the DRM DSC helper for det_thresh_flatness to match downstream
implementation and the DSC spec.

Fixes: c110cfd1753e ("drm/msm/disp/dpu1: Add support for DSC")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/539275/
Link: https://lore.kernel.org/r/20230329-rfc-msm-dsc-helper-v14-6-bafc7be95691@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm: Add MSM-specific DSC helper methods

Introduce MSM-specific DSC helper methods, as some calculations are
common between DP and DSC.

Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/539272/
Link: https://lore.kernel.org/r/20230329-rfc-msm-dsc-helper-v14-5-bafc7be95691@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dsi: use DRM DSC helpers for DSC setup

Use new DRM DSC helpers to setup DSI DSC configuration. The
initial_scale_value needs to be adjusted according to the standard, but
this is a separate change.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/539276/
Link: https://lore.kernel.org/r/20230329-rfc-msm-dsc-helper-v14-4-bafc7be95691@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/display/dsc: Add drm_dsc_get_bpp_int helper

Add helper to get the integer value of drm_dsc_config.bits_per_pixel

Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/539268/
Link: https://lore.kernel.org/r/20230329-rfc-msm-dsc-helper-v14-3-bafc7be95691@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/display/dsc: add helper to set semi-const parameters

Add a helper setting config values which are typically constant across
operating modes (table E-4 of the standard) and mux_word_size (which is
a const according to 3.5.2).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/539280/
Link: https://lore.kernel.org/r/20230329-rfc-msm-dsc-helper-v14-2-bafc7be95691@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/display/dsc: Add flatness and initial scale value calculations

Add helpers to calculate det_thresh_flatness and initial_scale_value as
these calculations are defined within the DSC spec.

Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/539282/
Link: https://lore.kernel.org/r/20230329-rfc-msm-dsc-helper-v14-1-bafc7be95691@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu/catalog: define DSPP blocks found on sdm845

Add definitions of DSPP blocks present on the sdm845 platform. This
should enable color-management on sdm845-bassed devices.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542142/
Link: https://lore.kernel.org/r/20230612182534.3345805-2-dmitry.baryshkov@linaro.org

drm/msm/dpu: do not enable color-management if DSPPs are not available

We can not support color management without DSPP blocks being provided
in the HW catalog. Do not enable color management for CRTCs if num_dspps
is 0.

Fixes: 4259ff7ae509 ("drm/msm/dpu: add support for pcc color block in dpu driver")
Reported-by: Yongqin Liu <yongqin.liu@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org>
Tested-by: Yongqin Liu <yongqin.liu@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542141/
Link: https://lore.kernel.org/r/20230612182534.3345805-1-dmitry.baryshkov@linaro.org

drm/msm/adreno: make adreno_is_a690()'s argument const

Change adreno_is_a690() prototype to accept the const struct adreno_gpu
pointer instead of a non-const one. This fixes the following warning:

In file included from drivers/gpu/drm/msm/msm_drv.c:33:
drivers/gpu/drm/msm/adreno/adreno_gpu.h: In function ‘adreno_is_a660_family’:
drivers/gpu/drm/msm/adreno/adreno_gpu.h:303:54: warning: passing argument 1 of ‘adreno_is_a690’ discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers]
  303 |         return adreno_is_a660(gpu) || adreno_is_a690(gpu) || adreno_is_7c3(gpu);

Fixes: 1b90e8f8879c ("drm/msm/adreno: change adreno_is_* functions to accept const argument")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/542138/
Link: https://lore.kernel.org/r/20230612182527.3345786-1-dmitry.baryshkov@linaro.org

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patches depend on these helpers.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/adreno: change adreno_is_* functions to accept const argument

All adreno_is_*() functions do not modify their argument in any way, so
they can be changed to accept const struct adreno_gpu pointer.

Suggested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/531706/
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/adreno: warn if chip revn is verified before being set

The commit 010c8bbad2cb ("drm: msm: adreno: Disable preemption on Adreno
510") tried to check GPU's revn before revn being set. Add WARN_ON_ONCE
to prevent such bugs from happening again. A separate helper is
necessary so that the warning is displayed really just once instead of
being displayed for each of comparisons.

Suggested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/531705/
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/a5xx: really check for A510 in a5xx_gpu_init

The commit 010c8bbad2cb ("drm: msm: adreno: Disable preemption on Adreno
510") added special handling for a510 (this SKU doesn't seem to support
preemption, so the driver should clamp nr_rings to 1). However the
gpu->revn is not yet set (it is set later, in adreno_gpu_init()) and
thus the condition is always false. Check config->rev instead.

Fixes: 010c8bbad2cb ("drm: msm: adreno: Disable preemption on Adreno 510")
Reported-by: Adam Skladowski <a39.skl@gmail.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Adam Skladowski <a39.skl@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/531511/
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/a6xx: Fix a690 CP_PROTECT settings

Allow access to CP_PERFCTR_CP_SEL[n] and RB_PERFCTR_RB_SEL which are
used by fdperf and pps-provider (perfetto).

Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/adreno: Add Adreno A690 support

Introduce support for the Adreno A690, found in Qualcomm SC8280XP.

Tested-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/540335/
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm: Move cmdstream dumping out of sched kthread

This is something that can block for arbitrary amounts of time as
userspace consumes from the FIFO.  So we don't really want this to
be in the fence signaling path.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/532617/

drm/msm/a6xx: don't set IO_PGTABLE_QUIRK_ARM_OUTER_WBWA with coherent SMMU

If the Adreno SMMU is dma-coherent, allocation will fail unless we
disable IO_PGTABLE_QUIRK_ARM_OUTER_WBWA. Skip setting this quirk for the
coherent SMMUs (like we have on sm8350 platform).

Fixes: 54af0ceb7595 ("arm64: dts: qcom: sm8350: add GPU, GMU, GPU CC and SMMU nodes")
Reported-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org> # SM8450 HDK
Patchwork: https://patchwork.freedesktop.org/patch/531562/
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm: drop unused ring variable in msm_ioctl_gem_submit()

The variable ring is not used by msm_parse_deps() and
msm_ioctl_gem_submit() and thus can be dropped.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/529340/
Signed-off-by: Rob Clark <robdclark@chromium.org>