dt-bindings: display/msm/gpu: fix the schema being not applied

dtschema v2024.4, v2024.5 and maybe earlier do not select device nodes for
given binding validation if the schema contains compatible list with
pattern and a const fallback.  This leads to binding being a no-op - not
being applied at all.  Issue should be fixed in the dtschema but for now
add a work-around do the binding can be used against DTS validation.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/600507/
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240623-qcom-adreno-dts-bindings-driver-v2-4-9496410de992@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: display/msm/gpu: simplify compatible regex

Regex for newer Adreno compatibles can be simpler.

Suggested-by: Conor Dooley <conor@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Patchwork: https://patchwork.freedesktop.org/patch/600505/
Link: https://lore.kernel.org/r/20240623-qcom-adreno-dts-bindings-driver-v2-3-9496410de992@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: display/msm/gpu: define reg-names in top-level

All devices should (and actually do) have same order of entries, if
possible.  That's the case for reg/reg-names, so define the reg-names in
top-level to enforce that.

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/600510/
Link: https://lore.kernel.org/r/20240623-qcom-adreno-dts-bindings-driver-v2-2-9496410de992@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: display/msm/gpu: constrain clocks in top-level

We expect each schema with variable number of clocks, to have the widest
constrains in top-level "properties:".  This is more readable and also
makes binding stricter, if there is no "if:then:" block for given
variant.

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/600504/
Link: https://lore.kernel.org/r/20240623-qcom-adreno-dts-bindings-driver-v2-1-9496410de992@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: remove CRTC frame event callback registration

The frame event callback is always set to dpu_crtc_frame_event_cb() (or
to NULL) and the data is always either the CRTC itself or NULL
(correpondingly). Thus drop the event callback registration, call the
dpu_crtc_frame_event_cb() directly and gate on the dpu_enc->crtc
assigned using dpu_encoder_assign_crtc().

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/600751/
Link: https://lore.kernel.org/r/20240625-dpu-no-crtc-register-v3-1-1b161df13776@linaro.org

drm/msm/dsi: Add phy configuration for MSM8937

Add phy configuration for 28nm dsi phy found on MSM8937 SoC. Only
difference from existing msm8916 configuration is number of phy
and io_start addresses.

Signed-off-by: Daniil Titov <daniilt971@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Barnabás Czémán <trabarni@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/600518/
Link: https://lore.kernel.org/r/20240623-dsi-v2-4-a0ca70fb4846@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: msm: dsi-phy-28nm: Document msm8937 compatible

The MSM8937 SoC uses a slightly different 28nm dsi phy. Add a new
compatible for it.

Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Barnabás Czémán <trabarni@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/600514/
Link: https://lore.kernel.org/r/20240623-dsi-v2-3-a0ca70fb4846@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/mdp5: Add MDP5 configuration for MSM8937

Add the mdp5_cfg_hw entry for MDP5 version v1.14 found on msm8937.

Signed-off-by: Daniil Titov <daniilt971@gmail.com>
Signed-off-by: Barnabás Czémán <trabarni@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/600513/
Link: https://lore.kernel.org/r/20240623-dsi-v2-2-a0ca70fb4846@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: display/msm: qcom, mdp5: Add msm8937 compatible

Add the compatible for the MDP5 found on MSM8937.

Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Barnabás Czémán <trabarni@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/600512/
Link: https://lore.kernel.org/r/20240623-dsi-v2-1-a0ca70fb4846@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/mdp5: Remove MDP_CAP_SRC_SPLIT from msm8x53_config

Remove MDP_CAP_SRC_SPLIT from msm8x53_config because
it is not referenced in downstream.

Fixes: fb25d4474fa0 ("drm/msm/mdp5: Add configuration for MDP v1.16")
Signed-off-by: Barnabás Czémán <trabarni@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/600521/
Link: https://lore.kernel.org/r/20240624-msm8953-mdp-fix-v1-1-be4d3262ebe3@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dp: switch to struct drm_edid

Prefer the struct drm_edid based functions for reading the EDID and
updating the connector.

Simplify the flow by updating the EDID property when the EDID is read
instead of at .get_modes.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/593976/
Link: https://lore.kernel.org/r/93d6c446ed4831dadfb4a77635a67cf5f27e19ff.1715691257.git.jani.nikula@intel.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: guard ctl irq callback register/unregister

CTLs on older qualcomm SOCs like msm8953 and msm8996 has not got interrupts,
so better to skip CTL irq callback register/unregister
make dpu_ctl_cfg be able to define without intr_start.

Signed-off-by: Barnabás Czémán <trabarni@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/596854/
Link: https://lore.kernel.org/r/20240509-ctl_irq-v1-1-9433f2da9dc7@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: rename dpu_hw_setup_vsync_source functions

Rename dpu_hw_setup_vsync_source functions to make the names match the
implementation: on DPU 5.x the TOP only contains timer setup, while 3.x
and 4.x used MDP_VSYNC_SEL register to select TE source.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/598745/
Link: https://lore.kernel.org/r/20240613-dpu-handle-te-signal-v2-8-67a0116b5366@linaro.org

drm/msm/dpu: support setting the TE source

Make the DPU driver use the TE source specified in the DT. If none is
specified, the driver defaults to the first GPIO (mdp_vsync_p).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/598733/
Link: https://lore.kernel.org/r/20240613-dpu-handle-te-signal-v2-7-67a0116b5366@linaro.org

drm/msm/dsi: parse vsync source from device tree

Allow board's device tree to specify the vsync source (aka TE source).
If the property is omitted, the display controller driver will use the
default setting.

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
[DB: fixed clearing of return value if there is no TE property]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/598740/
Link: https://lore.kernel.org/r/20240613-dpu-handle-te-signal-v2-6-67a0116b5366@linaro.org

drm/msm/dpu: rework vsync_source handling

The struct msm_display_info has is_te_using_watchdog_timer field which
is neither set anywhere nor is flexible enough to specify different
sources. Replace it with the field specifying the vsync source using
enum dpu_vsync_source.

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/598738/
Link: https://lore.kernel.org/r/20240613-dpu-handle-te-signal-v2-5-67a0116b5366@linaro.org

drm/msm/dpu: pull the is_cmd_mode out of _dpu_encoder_update_vsync_source()

Setting vsync source makes sense only for DSI CMD panels. Pull the
is_cmd_mode condition out of the function into the calling code, so that
it becomes more explicit.

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/598736/
Link: https://lore.kernel.org/r/20240613-dpu-handle-te-signal-v2-4-67a0116b5366@linaro.org

drm/msm/dsi: drop unused GPIOs handling

Neither disp-enable-gpios nor disp-te-gpios are defined in the schema.
None of the board DT files use those GPIO pins. Drop them from the
driver.

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/598734/
Link: https://lore.kernel.org/r/20240613-dpu-handle-te-signal-v2-3-67a0116b5366@linaro.org

drm/msm/dpu: convert vsync source defines to the enum

Add enum dpu_vsync_source instead of a series of defines. Use this enum
to pass vsync information.

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/598743/
Link: https://lore.kernel.org/r/20240613-dpu-handle-te-signal-v2-2-67a0116b5366@linaro.org

dt-bindings: display/msm/dsi: allow specifying TE source

Command mode panels provide TE signal back to the DSI host to signal
that the frame display has completed and update of the image will not
cause tearing. Usually it is connected to the first GPIO with the
mdp_vsync function, which is the default. In such case the property can
be skipped.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/598732/
Link: https://lore.kernel.org/r/20240613-dpu-handle-te-signal-v2-1-67a0116b5366@linaro.org

drm/msm/dpu: drop validity checks for clear_pending_flush() ctl op

clear_pending_flush() ctl op is always assigned irrespective of the DPU
hardware revision. Hence there is no needed to check whether the op has
been assigned before calling it.

Drop the checks across the driver for clear_pending_flush() and also
update its documentation that it is always expected to be assigned.

changes in v2:
- instead of adding more validity checks just drop the one for clear_pending_flush
- update the documentation for clear_pending_flush() ctl op
- update the commit text reflecting these changes

changes in v3:
- simplify the documentation of clear_pending_flush

Fixes: d7d0e73f7de3 ("drm/msm/dpu: introduce the dpu_encoder_phys_* for writeback")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/464fbd84-0d1c-43c3-a40b-31656ac06456@moroto.mountain/T/
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/600241/
Link: https://lore.kernel.org/r/20240620201731.3694593-1-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm: mdss: Add SM7150 support

Add support for MDSS on SM7150.

Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/599133/
Link: https://lore.kernel.org/r/20240614215855.82093-5-danila@jiaxyga.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: display/msm: Add SM7150 MDSS

Document the MDSS hardware found on the Qualcomm SM7150 platform.

Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/599132/
Link: https://lore.kernel.org/r/20240614215855.82093-4-danila@jiaxyga.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: Add SM7150 support

Add definitions for the display hardware used on the Qualcomm SM7150
platform.

Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/599129/
Link: https://lore.kernel.org/r/20240614215855.82093-3-danila@jiaxyga.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: display/msm: Add SM7150 DPU

Document the DPU hardware found on the Qualcomm SM7150 platform.

Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/599127/
Link: https://lore.kernel.org/r/20240614215855.82093-2-danila@jiaxyga.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dsi: add a comment to explain pkt_per_line encoding

Make it clear why the pkt_per_line value is being "divided by 2".

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/596236/
Link: https://lore.kernel.org/r/20240530-msm-drm-dsc-dsi-video-upstream-4-v6-6-2ab1d334c657@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dsi: set VIDEO_COMPRESSION_MODE_CTRL_WC

Video mode DSC won't work if this field is not set correctly. Set it to fix
video mode DSC (for slice_per_pkt==1 cases at least).

Fixes: 08802f515c3c ("drm/msm/dsi: Add support for DSC configuration")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/596234/
Link: https://lore.kernel.org/r/20240530-msm-drm-dsc-dsi-video-upstream-4-v6-5-2ab1d334c657@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dsi: set video mode widebus enable bit when widebus is enabled

The value returned by msm_dsi_wide_bus_enabled() doesn't match what the
driver is doing in video mode. Fix that by actually enabling widebus for
video mode.

Fixes: efcbd6f9cdeb ("drm/msm/dsi: Enable widebus for DSI")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Patchwork: https://patchwork.freedesktop.org/patch/596232/
Link: https://lore.kernel.org/r/20240530-msm-drm-dsc-dsi-video-upstream-4-v6-4-2ab1d334c657@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: enable compression bit in cfg2 for DSC

Enable compression bit in cfg2 register for DSC in the DSI case
per hardware version.

Signed-off-by: Jun Nie <jun.nie@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/596231/
Link: https://lore.kernel.org/r/20240530-msm-drm-dsc-dsi-video-upstream-4-v6-3-2ab1d334c657@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: adjust data width for widen bus case

data is valid for only half the active window if widebus
is enabled

Signed-off-by: Jun Nie <jun.nie@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/596229/
Link: https://lore.kernel.org/r/20240530-msm-drm-dsc-dsi-video-upstream-4-v6-2-2ab1d334c657@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: fix video mode DSC for DSI

Add width change in DPU timing for DSC compression case to work with
DSI video mode.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/596227/
Link: https://lore.kernel.org/r/20240530-msm-drm-dsc-dsi-video-upstream-4-v6-1-2ab1d334c657@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dsi: Remove dsi_phy_write_[un]delay()

These are dummy wrappers that do literally nothing interesting.
Remove them.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/590703/
Link: https://lore.kernel.org/r/20240423-topic-msm_cleanup-v1-2-b30f39f43b90@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dsi: Remove dsi_phy_read/write()

These are dummy wrappers that do literally nothing interesting.
Remove them.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/590700/
Link: https://lore.kernel.org/r/20240423-topic-msm_cleanup-v1-1-b30f39f43b90@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/a7xx: Add missing register writes from downstream

This isn't known to fix anything yet, but it's a good idea to add it.

Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/592043/
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm: Add MSM_PARAM_RAYTRACING uapi

Expose the value of the software fuse to userspace.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/592044/
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/a7xx: Initialize a750 "software fuse"

On all Qualcomm platforms with a7xx GPUs, qcom_scm provides a method to
initialize cx_mem. Copy this from downstream (minus BCL which we
currently don't support). On a750, this includes a new "fuse" register
which can be used by qcom_scm to fuse off certain features like
raytracing in software. The fuse is default off, and is initialized by
calling the method. Afterwards we have to read it to find out which
features were enabled.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/592042/
Signed-off-by: Rob Clark <robdclark@chromium.org>

firmware: qcom_scm: Add gpu_init_regs call

This will used by drm/msm to initialize GPU registers that Qualcomm's
firmware doesn't make writeable to the kernel.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Bjorn Andersson <andersson@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/592039/
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/adreno: Check for zap node availability

This should allow disabling the zap node via an overlay, for slbounce.

Suggested-by: Nikita Travkin <nikita@trvn.ru>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/594572/

drm/msm: Add obj flags to gpu devcoredump

When debugging faults, it is useful to know how the BO is mapped (cached
vs WC, gpu readonly, etc).

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/593854/

drm/msm: Add GPU memory traces

Perfetto can use these traces to track global and per-process GPU memory
usage.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/580854/

drm/msm/a6xx: Fix A702 UBWC mode

UBWC_MODE is a one-bit-wide field, so a value of 2 is obviously bogus.

Replace it with the correct value (0).

Fixes: 18397519cb62 ("drm/msm/adreno: Add A702 support")
Reported-by: Connor Abbott <cwabbott0@gmail.com>
Closes: https://lore.kernel.org/linux-arm-msm/CACu1E7FTN=kwaDJMNiTmFspALzj2+Q-nvsN5ugi=vz4RdUGvGw@mail.gmail.com/
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/597359/
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/a6xx: use __unused__ to fix compiler warnings for gen7_* includes

GCC diagnostic pragma method throws below warnings in some of the versions

drivers/gpu/drm/msm/adreno/a6xx_gpu_state.c:16:9: warning: unknown
option after '#pragma GCC diagnostic' kind [-Wpragmas]
  #pragma GCC diagnostic ignored "-Wunused-const-variable"
          ^
In file included from drivers/gpu/drm/msm/adreno/a6xx_gpu_state.c:18:0:
drivers/gpu/drm/msm/adreno/adreno_gen7_0_0_snapshot.h:924:19: warning:
'gen7_0_0_external_core_regs' defined but not used [-Wunused-variable]
  static const u32 *gen7_0_0_external_core_regs[] = {
                    ^
In file included from drivers/gpu/drm/msm/adreno/a6xx_gpu_state.c:19:0:
drivers/gpu/drm/msm/adreno/adreno_gen7_2_0_snapshot.h:748:19: warning:
'gen7_2_0_external_core_regs' defined but not used [-Wunused-variable]
  static const u32 *gen7_2_0_external_core_regs[] = {
                    ^
In file included from drivers/gpu/drm/msm/adreno/a6xx_gpu_state.c:20:0:
drivers/gpu/drm/msm/adreno/adreno_gen7_9_0_snapshot.h:1188:43: warning:
'gen7_9_0_sptp_clusters' defined but not used [-Wunused-variable]
  static struct gen7_sptp_cluster_registers gen7_9_0_sptp_clusters[] = {
                                            ^
drivers/gpu/drm/msm/adreno/adreno_gen7_9_0_snapshot.h:1438:19: warning:
'gen7_9_0_external_core_regs' defined but not used [-Wunused-variable]
  static const u32 *gen7_9_0_external_core_regs[] = {

Remove GCC version dependency by using __unused__ for the unused gen7_* includes.

Changes in v2:
- Fix the warnings in the commit text
- Use __attribute((__unused__)) instead of local assignment

changes in v3:
- drop the Link from the auto add

changes in v4:
- replace __attribute((__unused__)) with __always_unused

Fixes: 64d6255650d4 ("drm/msm: More fully implement devcoredump for a7xx")
Suggested-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/597265/
[Add gen7_9_0_cx_debugbus_blocks as well]
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/adreno: Move CP_PROTECT settings to hw catalog

Move the CP_PROTECT settings into the hw catalog.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/599731/

drm/msm/adreno: Move hwcg table into a6xx specific info

Introduce a6xx_info where we can stash gen specific stuff without
polluting the toplevel adreno_info struct.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/599728/

drm/msm/adreno: Move hwcg regs to a6xx hw catalog

Move the hwcg tables into the hw catalog.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/599727/

drm/msm/adreno: Split catalog into separate files

Split each gen's gpu table into it's own file.  Only code-motion, no
functional change.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/599725/

drm/msm/adreno: Split up giant device table

Split into a separate table per generation, in preparation to move each
gen's device table to it's own file.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/599723/

Merge remote-tracking branch 'drm-misc/drm-misc-next' into HEAD

Merge drm-misc-next tree into the msm-next tree in order to be able to
use HDMI connector framework for the MSM HDMI driver.

drm/bridge-connector: implement glue code for HDMI connector

In order to let bridge chains implement HDMI connector infrastructure,
add necessary glue code to the drm_bridge_connector. In case there is a
bridge that sets DRM_BRIDGE_OP_HDMI, drm_bridge_connector will register
itself as a HDMI connector and provide proxy drm_connector_hdmi_funcs
implementation.

Note, to simplify implementation, there can be only one bridge in a
chain that sets DRM_BRIDGE_OP_HDMI. Setting more than one is considered
an error. This limitation can be lifted later, if the need arises.

Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240607-bridge-hdmi-connector-v5-3-ab384e6021af@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/bridge-connector: switch to using drmm allocations

Turn drm_bridge_connector to using drmm_kzalloc() and
drmm_connector_init() and drop the custom destroy function. The
drm_connector_unregister() and fwnode_handle_put() are already handled
by the drm_connector_cleanup() and so are safe to be dropped.

Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240607-bridge-hdmi-connector-v5-2-ab384e6021af@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/connector: hdmi: allow disabling Audio Infoframe

Add drm_atomic_helper_connector_hdmi_disable_audio_infoframe(), an API
to allow the driver disable sending the Audio Infoframe. This is to be
used by the drivers if setup of the infoframes is not tightly coupled
with the audio functionality and just disabling the audio playback
doesn't stop the HDMI hardware from sending the Infoframe.

Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240607-bridge-hdmi-connector-v5-1-ab384e6021af@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/panel: Update TODO list item for cleaning up prepared/enabled tracking

Now that most panels have been updated not to track/double-check their
prepared/enabled state update the TODO with next steps.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240604172305.v3.23.I104cdece7324b0c365e552a17f9883414ffaea01@changeid
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240604172305.v3.23.I104cdece7324b0c365e552a17f9883414ffaea01@changeid

drm/panel: raydium-rm67191: Don't call unprepare+disable at shutdown

It's the responsibility of a correctly written DRM modeset driver to
call drm_atomic_helper_shutdown() at shutdown time and that should be
disabling / unpreparing the panel if needed. Panel drivers shouldn't
be calling these functions themselves.

A recent effort was made to fix as many DRM modeset drivers as
possible [1] [2] [3] and most drivers are fixed now.

A grep through mainline for compatible strings used by this driver
indicates that it is used by IMX boards. The IMX driver appears to be
correctly calling drm_atomic_helper_shutdown() so we can remove the
calls.

[1] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org
[2] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org
[3] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.org

Cc: Robert Chiras <robert.chiras@nxp.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240604172305.v3.22.Id14188f1a8af7d524751c27c343a5b583ff5361f@changeid
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240604172305.v3.22.Id14188f1a8af7d524751c27c343a5b583ff5361f@changeid

drm/panel: raydium-rm67191: Stop tracking enabled

As talked about in commit d2aacaf07395 ("drm/panel: Check for already
prepared/enabled in drm_panel"), we want to remove needless code from
panel drivers that was storing and double-checking the
prepared/enabled state. Even if someone was relying on the
double-check before, that double-check is now in the core and not
needed in individual drivers.

The conversion of the rm67191 panel driver follows many of the other
panel drivers but has a few differences that need to be called out.

Like in commit 1e0465eb16a4 ("drm/panel: otm8009a: Don't double check
prepared/enabled"), this panel also uses the "prepared" flag to
prevent the backlight functions from running when the panel is powered
off. This is probably not the safest thing to do but the old behavior
was preserved. See the discussion in the otm8009a patch. Because of
this, I've left the driver tracking "prepared" but removed its
tracking of "enabled".

NOTE: as part of this, transition the panel's direct calls to its
disable/unprepare functions in shutdown to call through DRM panel.

Cc: Robert Chiras <robert.chiras@nxp.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240604172305.v3.21.I20f82e9dd1597a14ae37a64c6b8275add60fbdb1@changeid
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240604172305.v3.21.I20f82e9dd1597a14ae37a64c6b8275add60fbdb1@changeid

drm/panel: sharp-ls043t1le01: Don't call disable at shutdown/remove

It's the responsibility of a correctly written DRM modeset driver to
call drm_atomic_helper_shutdown() at shutdown time and that should be
disabling / unpreparing the panel if needed. Panel drivers shouldn't
be calling these functions themselves.

A recent effort was made to fix as many DRM modeset drivers as
possible [1] [2] [3] and most drivers are fixed now.

A grep through mainline for compatible strings used by this driver
indicates that it is used by Qualcomm boards. The Qualcomm driver
appears to be correctly calling drm_atomic_helper_shutdown() so we can
remove the calls.

[1] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org
[2] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org
[3] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.org

Cc: Werner Johansson <werner.johansson@sonymobile.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240604172305.v3.20.I89ee53f7fc2f0806cab318128e5fa927990d830f@changeid
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240604172305.v3.20.I89ee53f7fc2f0806cab318128e5fa927990d830f@changeid

drm/panel: sharp-ls043t1le01: Stop tracking prepared

As talked about in commit d2aacaf07395 ("drm/panel: Check for already
prepared/enabled in drm_panel"), we want to remove needless code from
panel drivers that was storing and double-checking the
prepared/enabled state. Even if someone was relying on the
double-check before, that double-check is now in the core and not
needed in individual drivers.

Cc: Werner Johansson <werner.johansson@sonymobile.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240604172305.v3.19.I56849dbe7c906f0cff076dc5286fd05c7e3e9c18@changeid
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240604172305.v3.19.I56849dbe7c906f0cff076dc5286fd05c7e3e9c18@changeid

drm/panel: sharp-lq101r1sx01: Don't call disable at shutdown/remove

It's the responsibility of a correctly written DRM modeset driver to
call drm_atomic_helper_shutdown() at shutdown time and that should be
disabling / unpreparing the panel if needed. Panel drivers shouldn't
be calling these functions themselves.

A recent effort was made to fix as many DRM modeset drivers as
possible [1] [2] [3] and most drivers are fixed now.

A grep through mainline for compatible strings used by this driver
indicates that it is used by Tegra boards. The Tegra driver appears to
be correctly calling drm_atomic_helper_shutdown() so we can remove the
calls.

[1] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org
[2] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org
[3] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.org

Cc: Thierry Reding <treding@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240604172305.v3.18.I6a87fce1ee027c96f71c7adf74248b865f50b336@changeid
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240604172305.v3.18.I6a87fce1ee027c96f71c7adf74248b865f50b336@changeid

drm/panel: sharp-lq101r1sx01: Stop tracking prepared/enabled

As talked about in commit d2aacaf07395 ("drm/panel: Check for already
prepared/enabled in drm_panel"), we want to remove needless code from
panel drivers that was storing and double-checking the
prepared/enabled state. Even if someone was relying on the
double-check before, that double-check is now in the core and not
needed in individual drivers.

Cc: Thierry Reding <treding@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240604172305.v3.17.Ifd6b12b8a4bca7d492e892ea7455e83f5c0ab5a8@changeid
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240604172305.v3.17.Ifd6b12b8a4bca7d492e892ea7455e83f5c0ab5a8@changeid

drm/panel: seiko-43wvf1g: Don't call disable at shutdown/remove

It's the responsibility of a correctly written DRM modeset driver to
call drm_atomic_helper_shutdown() at shutdown time and that should be
disabling / unpreparing the panel if needed. Panel drivers shouldn't
be calling these functions themselves.

A recent effort was made to fix as many DRM modeset drivers as
possible [1] [2] [3] and most drivers are fixed now.

A grep through mainline for compatible strings used by this driver
indicates that it is used by IMX boards. As far as I can tell, all IMX
boards are now correctly calling drm_atomic_helper_shutdown() so we
can remove the calls.

[1] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org
[2] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org
[3] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.org

Cc: Marco Franchi <marco.franchi@nxp.com>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: imx@lists.linux.dev
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240604172305.v3.16.Ief712fb6720cb98bdf9ec8644362d028b6554f9b@changeid
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240604172305.v3.16.Ief712fb6720cb98bdf9ec8644362d028b6554f9b@changeid

drm/panel: seiko-43wvf1g: Stop tracking prepared/enabled

As talked about in commit d2aacaf07395 ("drm/panel: Check for already
prepared/enabled in drm_panel"), we want to remove needless code from
panel drivers that was storing and double-checking the
prepared/enabled state. Even if someone was relying on the
double-check before, that double-check is now in the core and not
needed in individual drivers.

Cc: Marco Franchi <marco.franchi@nxp.com>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: imx@lists.linux.dev
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240604172305.v3.15.Idda91d310ca2e4f5a4ab4ca6eaf1afdaf14eeb51@changeid
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240604172305.v3.15.Idda91d310ca2e4f5a4ab4ca6eaf1afdaf14eeb51@changeid

drm/panel: panasonic-vvx10f034n00: Don't call disable at shutdown/remove

It's the responsibility of a correctly written DRM modeset driver to
call drm_atomic_helper_shutdown() at shutdown time and that should be
disabling / unpreparing the panel if needed. Panel drivers shouldn't
be calling these functions themselves.

A recent effort was made to fix as many DRM modeset drivers as
possible [1] [2] [3] and most drivers are fixed now.

Unfortunately, grepping mainline for this panel's compatible string
shows no hits, so we can't be 100% sure if the DRM modeset driver used
with this panel has been fixed. If it is found that the DRM modeset
driver hasn't been fixed then this patch could be temporarily reverted
until it is.

[1] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org
[2] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org
[3] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.org

Cc: Werner Johansson <werner.johansson@sonymobile.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240604172305.v3.14.I1562c864ee35a9c166765488c95104b7e4e562da@changeid
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240604172305.v3.14.I1562c864ee35a9c166765488c95104b7e4e562da@changeid

drm/panel: panasonic-vvx10f034n00: Stop tracking prepared/enabled

As talked about in commit d2aacaf07395 ("drm/panel: Check for already
prepared/enabled in drm_panel"), we want to remove needless code from
panel drivers that was storing and double-checking the
prepared/enabled state. Even if someone was relying on the
double-check before, that double-check is now in the core and not
needed in individual drivers.

Cc: Werner Johansson <werner.johansson@sonymobile.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240604172305.v3.13.I7278e956ffd1cf686e737834578d4bb3ea527c7f@changeid
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240604172305.v3.13.I7278e956ffd1cf686e737834578d4bb3ea527c7f@changeid

drm/panel: jdi-lt070me05000: Don't call disable at shutdown/remove

It's the responsibility of a correctly written DRM modeset driver to
call drm_atomic_helper_shutdown() at shutdown time and that should be
disabling / unpreparing the panel if needed. Panel drivers shouldn't
be calling these functions themselves.

A recent effort was made to fix as many DRM modeset drivers as
possible [1] [2] [3] and most drivers are fixed now.

A grep through mainline for compatible strings used by this driver
indicates that it is used by Qualcomm boards. The Qualcomm driver
appears to be correctly calling drm_atomic_helper_shutdown() so we can
remove the calls.

[1] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org
[2] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org
[3] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.org

Cc: Vinay Simha BN <simhavcs@gmail.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240604172305.v3.12.I5f3426e511e77b93c247e0aac114bd12b2b2a933@changeid
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240604172305.v3.12.I5f3426e511e77b93c247e0aac114bd12b2b2a933@changeid

drm/panel: jdi-lt070me05000: Stop tracking prepared/enabled

As talked about in commit d2aacaf07395 ("drm/panel: Check for already
prepared/enabled in drm_panel"), we want to remove needless code from
panel drivers that was storing and double-checking the
prepared/enabled state. Even if someone was relying on the
double-check before, that double-check is now in the core and not
needed in individual drivers.

NOTE: as part of this, transition the panel's direct calls to its
disable function in shutdown/remove to call through DRM panel.

Cc: Vinay Simha BN <simhavcs@gmail.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240604172305.v3.11.I2e991044def6644c18ad8d7d686f4f3006f278de@changeid
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240604172305.v3.11.I2e991044def6644c18ad8d7d686f4f3006f278de@changeid

drm/panel: tdo-tl070wsh30: Don't call unprepare+disable at shutdown/remove

It's the responsibility of a correctly written DRM modeset driver to
call drm_atomic_helper_shutdown() at shutdown time and that should be
disabling / unpreparing the panel if needed. Panel drivers shouldn't
be calling these functions themselves.

A recent effort was made to fix as many DRM modeset drivers as
possible [1] [2] [3] and most drivers are fixed now.

Unfortunately, grepping mainline for this panel's compatible string
shows no hits, so we can't be 100% sure if the DRM modeset driver used
with this panel has been fixed. If it is found that the DRM modeset
driver hasn't been fixed then this patch could be temporarily reverted
until it is.

[1] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org
[2] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org
[3] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.org

Cc: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240604172305.v3.10.I46ff4e28c260bcd8e81205debd0994e76fd8aeac@changeid
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240604172305.v3.10.I46ff4e28c260bcd8e81205debd0994e76fd8aeac@changeid

drm/panel: tdo-tl070wsh30: Stop tracking prepared

As talked about in commit d2aacaf07395 ("drm/panel: Check for already
prepared/enabled in drm_panel"), we want to remove needless code from
panel drivers that was storing and double-checking the
prepared/enabled state. Even if someone was relying on the
double-check before, that double-check is now in the core and not
needed in individual drivers.

Cc: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240604172305.v3.9.I5025ab14adc2efeef1be1843648547fb725106be@changeid
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240604172305.v3.9.I5025ab14adc2efeef1be1843648547fb725106be@changeid

drm/panel: osd-osd101t2587-53ts: Don't call unprepare+disable at shutdown/remove

It's the responsibility of a correctly written DRM modeset driver to
call drm_atomic_helper_shutdown() at shutdown time and that should be
disabling / unpreparing the panel if needed. Panel drivers shouldn't
be calling these functions themselves.

A recent effort was made to fix as many DRM modeset drivers as
possible [1] [2] [3] and most drivers are fixed now.

A grep through mainline for compatible strings used by this driver
indicates that it is used by TI OMAP boards. The OMAP driver appears
to be correctly calling drm_atomic_helper_shutdown() so we can remove
the calls.

[1] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org
[2] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org
[3] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.org

Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240604172305.v3.8.Ic533ce1323b94230d4155f9364c2b7c1bc47e798@changeid
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240604172305.v3.8.Ic533ce1323b94230d4155f9364c2b7c1bc47e798@changeid

drm/panel: osd-osd101t2587-53ts: Stop tracking prepared/enabled

As talked about in commit d2aacaf07395 ("drm/panel: Check for already
prepared/enabled in drm_panel"), we want to remove needless code from
panel drivers that was storing and double-checking the
prepared/enabled state. Even if someone was relying on the
double-check before, that double-check is now in the core and not
needed in individual drivers.

Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240604172305.v3.7.Ic7f6b4ae48027668940a756090cfc454645d3da4@changeid
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240604172305.v3.7.Ic7f6b4ae48027668940a756090cfc454645d3da4@changeid

drm/panel: olimex-lcd-olinuxino: Don't call unprepare+disable at remove

It's the responsibility of a correctly written DRM modeset driver to
call drm_atomic_helper_shutdown() at shutdown time and that should be
disabling / unpreparing the panel if needed. Panel drivers shouldn't
be calling these functions themselves.

A recent effort was made to fix as many DRM modeset drivers as
possible [1] [2] [3] and most drivers are fixed now.

Unfortunately, grepping mainline for this panel's compatible string
shows no hits, so we can't be 100% sure if the DRM modeset driver used
with this panel has been fixed. If it is found that the DRM modeset
driver hasn't been fixed then this patch could be temporarily reverted
until it is.

[1] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org
[2] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org
[3] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.org

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240604172305.v3.6.I4c79deffb7551ecfb0378302f8dee1275fd1c060@changeid
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240604172305.v3.6.I4c79deffb7551ecfb0378302f8dee1275fd1c060@changeid

drm/panel: olimex-lcd-olinuxino: Stop tracking prepared/enabled

As talked about in commit d2aacaf07395 ("drm/panel: Check for already
prepared/enabled in drm_panel"), we want to remove needless code from
panel drivers that was storing and double-checking the
prepared/enabled state. Even if someone was relying on the
double-check before, that double-check is now in the core and not
needed in individual drivers.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240604172305.v3.5.I6a96d762be98321e02f56b5864359258d65d9da8@changeid
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240604172305.v3.5.I6a96d762be98321e02f56b5864359258d65d9da8@changeid

drm/panel: khadas-ts050: Don't call unprepare+disable at shutdown/remove

It's the responsibility of a correctly written DRM modeset driver to
call drm_atomic_helper_shutdown() at shutdown time and that should be
disabling / unpreparing the panel if needed. Panel drivers shouldn't
be calling these functions themselves.

A recent effort was made to fix as many DRM modeset drivers as
possible [1] [2] [3] and most drivers are fixed now.

Unfortunately, grepping mainline for this panel's compatible string
shows no hits, so we can't be 100% sure if the DRM modeset driver used
with this panel has been fixed. If it is found that the DRM modeset
driver hasn't been fixed then this patch could be temporarily reverted
until it is.

[1] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org
[2] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org
[3] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.org

Cc: Jacobe Zang <jacobe.zang@wesion.com>
Cc: Nicolas Belin <nbelin@baylibre.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240604172305.v3.4.I1ee65e7905bf5bf46a0e6c5126ac3c7aa25cb80b@changeid
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240604172305.v3.4.I1ee65e7905bf5bf46a0e6c5126ac3c7aa25cb80b@changeid

drm/panel: khadas-ts050: Stop tracking prepared/enabled

As talked about in commit d2aacaf07395 ("drm/panel: Check for already
prepared/enabled in drm_panel"), we want to remove needless code from
panel drivers that was storing and double-checking the
prepared/enabled state. Even if someone was relying on the
double-check before, that double-check is now in the core and not
needed in individual drivers.

Cc: Jacobe Zang <jacobe.zang@wesion.com>
Cc: Nicolas Belin <nbelin@baylibre.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240604172305.v3.3.Ibed1026f20cab08c90fa376e68c2f23a343e826b@changeid
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240604172305.v3.3.Ibed1026f20cab08c90fa376e68c2f23a343e826b@changeid

drm/panel: boe-himax8279d: Don't call unprepare+disable at shutdown/remove

It's the responsibility of a correctly written DRM modeset driver to
call drm_atomic_helper_shutdown() at shutdown time and that should be
disabling / unpreparing the panel if needed. Panel drivers shouldn't
be calling these functions themselves.

A recent effort was made to fix as many DRM modeset drivers as
possible [1] [2] [3] and most drivers are fixed now.

Unfortunately, grepping mainline for this panel's compatible string
shows no hits, so we can't be 100% sure if the DRM modeset driver used
with this panel has been fixed. If it is found that the DRM modeset
driver hasn't been fixed then this patch could be temporarily reverted
until it is.

[1] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org
[2] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org
[3] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.org

Cc: Jerry Han <jerry.han.hq@gmail.com>
Cc: Jitao Shi <jitao.shi@mediatek.com>
Cc: Rock Wang <rock_wang@himax.com.cn>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240604172305.v3.2.I19086c524d38f28f746befe85cb39ffda9d2f666@changeid
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240604172305.v3.2.I19086c524d38f28f746befe85cb39ffda9d2f666@changeid

drm/panel: boe-himax8279d: Stop tracking prepared/enabled

As talked about in commit d2aacaf07395 ("drm/panel: Check for already
prepared/enabled in drm_panel"), we want to remove needless code from
panel drivers that was storing and double-checking the
prepared/enabled state. Even if someone was relying on the
double-check before, that double-check is now in the core and not
needed in individual drivers.

NOTE: as part of this, transition the panel's direct calls to its
disable/unprepare functions in shutdown/remove to call through DRM
panel.

Cc: Jerry Han <jerry.han.hq@gmail.com>
Cc: Jitao Shi <jitao.shi@mediatek.com>
Cc: Rock Wang <rock_wang@himax.com.cn>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240604172305.v3.1.Ia3f254ab6e04e4f7afba6c066454498c8fb01324@changeid
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240604172305.v3.1.Ia3f254ab6e04e4f7afba6c066454498c8fb01324@changeid

drm/bridge: it6505: update usleep_range for RC circuit charge time

The spec of timing between IVDD/OVDD and SYSRTEN is 10ms, but SYSRSTN RC
circuit need at least 25ms for rising time, update for match spec

Signed-off-by: Kuro Chung <kuro.chung@ite.com.tw>
Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240604024405.1122488-1-kuro.chung@ite.com.tw

drm/bridge: samsung-dsim: Fix porch calcalcuation rounding

The VFP, HBP, and HSA are divided between the available lanes if
there is more than one lane.  For certain timings and lane
configurations, the HFP may not be evenly divisible. If the HFP
is rounded down, it ends up being too small which can cause some
monitors to not sync properly. In these instances, adjust htotal
and hsync to round the HFP up, and recalculate the htotal.

This allows 720P-60 to operation on an i.MX8MP with a four-lane
configuration.

Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> # Kontron BL i.MX8MM with HDMI monitor
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240601144103.198299-2-aford173@gmail.com

drm/bridge: samsung-dsim: Set P divider based on min/max of fin pll

The P divider should be set based on the min and max values of
the fin pll which may vary between different platforms.
These ranges are defined per platform, but hard-coded values
were used instead which resulted in a smaller range available
on the i.MX8M[MNP] than what was possible.

As noted by Frieder, there are descripencies between the reference
manuals of the Mini, Nano and Plus, so I reached out to my NXP
rep and got the following response regarding the varing notes
in the documentation.

"Yes it is definitely wrong, the one that is part of the NOTE in
MIPI_DPHY_M_PLLPMS register table against PMS_P, PMS_M and PMS_S is
not correct. I will report this to Doc team, the one customer should
be take into account is the Table 13-40 DPHY PLL Parameters and the
Note above."

With this patch, the clock rates now match the values used in NXP's
downstream kernel.

Fixes: 846307185f0f ("drm/bridge: samsung-dsim: update PLL reference clock")
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240601144103.198299-1-aford173@gmail.com

drm/bridge: tc358767: Check if fully initialized before signalling HPD event via IRQ

Make sure the connector is fully initialized before signalling any
HPD events via drm_kms_helper_hotplug_event(), otherwise this may
lead to NULL pointer dereference.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240531203333.277476-1-marex@denx.de

drm/bridge: tc358767: Fix comment in tc_edp_mode_valid

Fix comment copy-paste error in tc_edp_mode_valid(), this function
is validating DP/eDP clock, not DPI clock frequency. Update the
comment to match. No functional change.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240531203213.277421-1-marex@denx.de

drm/bridge: Drop drm_bridge_chain_mode_fixup

There are no users left of drm_bridge_chain_mode_fixup() and we
do not want to have this function available, so drop it.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240531-bridge_chain_mode-v1-2-8b49e36c5dd3@ravnborg.org

drm/mediatek: Drop chain_mode_fixup call in mode_valid()

The mode_valid implementation had a call to
drm_bridge_chain_mode_fixup() which would be wrong as the mode_valid is
not allowed to change anything - only to validate the mode.

As the next bridge is often/always a connector the call had no effect
anyway. So drop it.

From the git history I could see this call was included in the original
version of the driver so there was no help there to find out why it was
added in the first place. But a lot has changed since the initial driver
were added and is seems safe to remove the call now.

v4:
  - Link to v3: https://lore.kernel.org/dri-devel/20220717174454.46616-4-sam@ravnborg.org/
  - Rebase, and added acks/rb
v3:
  - Link to v2: https://lore.kernel.org/dri-devel/20211020181901.2114645-6-sam@ravnborg.org/
v2:
  - Link to v1: https://lore.kernel.org/dri-devel/20210722062246.2512666-6-sam@ravnborg.org/

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Cc: linux-mediatek@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240531-bridge_chain_mode-v1-1-8b49e36c5dd3@ravnborg.org

drm/panic: Add a kmsg panic screen

Add a kmsg option, which will display the last lines of kmsg,
and should be similar to fbcon.
Add a drm.panic_screen module parameter, so you can choose between
the different panic screens available.
two options currently, but more will be added later:
 * "user": a short message telling the user to reboot the machine.
 * "kmsg": fill the screen with the last lines of kmsg.

You can even change it at runtime by writing to
/sys/module/drm/parameters/panic_screen

v2:
 * Use module parameter instead of Kconfig choice
   (Javier Martinez Canillas)

v3:
 * Add help for module parameter usage in Kconfig
   (Javier Martivez Canillas)
 * Fix use of font->height before checking it isn't null.
   (kernel test robot, Dan Carpenter)

Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240603095343.39588-4-jfalempe@redhat.com

drm/panic: Add a set_pixel() callback to drm_scanout_buffer

This allows drivers to draw the pixel, and handle tiling, or specific
color formats.

v2:
 * Use fg_color for blit() functions (Javier Martinez Canillas)

Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240603095343.39588-3-jfalempe@redhat.com

drm/panic: only draw the foreground color in drm_panic_blit()

The whole framebuffer is cleared, so it's useless to rewrite the
background colored pixels. It allows to simplify the drawing
functions, and prepare the work for the set_pixel() callback.

v2:
 * keep fg16/fg24/fg32 as variable name for the blit function.
 * add drm_panic_is_pixel_fg() to avoid code duplication.
 both suggested by Javier Martinez Canillas

Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240603095343.39588-2-jfalempe@redhat.com

drm/sun4i: Fix layer zpos change/atomic modesetting

Identical configurations of planes can lead to different (and wrong)
layer -> pipe routing at HW level, depending on the order of atomic
plane changes.

For example:

- Layer 1 is configured to zpos 0 and thus uses pipe 0. No other layer
  is enabled. This is a typical situation at boot.

- When a compositor takes over and layer 3 is enabled,
  sun8i_ui_layer_enable() will get called with old_zpos=0 zpos=1, which
  will lead to incorrect disabling of pipe 0 and enabling of pipe 1.

What happens is that sun8i_ui_layer_enable() function may disable
blender pipes even if it is no longer assigned to its layer.

To correct this, move the routing setup out of individual plane's
atomic_update into crtc's atomic_update, where it can be calculated
and updated all at once.

Remove the atomic_disable callback because it is no longer needed.

Signed-off-by: Ondrej Jirman <megi@xff.cz>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240224150604.3855534-4-megi@xff.cz
Signed-off-by: Maxime Ripard <mripard@kernel.org>

drm/sun4i: Add more parameters to sunxi_engine commit callback

These will be needed later on when we move layer configuration to
crtc update.

Signed-off-by: Ondrej Jirman <megi@xff.cz>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240224150604.3855534-3-megi@xff.cz
Signed-off-by: Maxime Ripard <mripard@kernel.org>

drm/sun4i: Unify sun8i_*_layer structs

These structs are identical, use a single struct to represent private
data for the DRM plane. This is a preparation for configuring layer
routing from the CRTC (mixer) instead of current approach of setting
up routing from individual layer's atomic_update callback.

Signed-off-by: Ondrej Jirman <megi@xff.cz>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240224150604.3855534-2-megi@xff.cz
Signed-off-by: Maxime Ripard <mripard@kernel.org>

drm: add missing MODULE_DESCRIPTION() macros

On x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/gud/gud.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/drm_panel_orientation_quirks.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/drm_mipi_dbi.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/i915/kvmgt.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/udl/udl.o

Add the missing invocation of the MODULE_DESCRIPTION() macro to all
files which have a MODULE_LICENSE().

For consistency this includes drivers/gpu/drm/drm_simple_kms_helper.c
since it contains a MODULE_LICENSE() even though it isn't built as a
separate module -- it is always built as part of drm_kms_helper and
drm_kms_helper_common.c already provides a MODULE_DESCRIPTION for that
module.

Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240609-md-drivers-gpu-drm-v1-1-89e9a316d513@quicinc.com

drm/bridge: add missing MODULE_DESCRIPTION() macros

make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/bridge/lontium-lt9611.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/bridge/lontium-lt9611uxc.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/bridge/sil-sii8620.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/bridge/sii9234.o

Add the missing invocations of the MODULE_DESCRIPTION() macro.

Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240609-md-drivers-gpu-drm-bridge-v1-1-b582c5c815d7@quicinc.com

drm/tiny: add missing MODULE_DESCRIPTION() macros

make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/tiny/bochs.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/tiny/cirrus.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/tiny/gm12u320.o

Add the missing invocations of the MODULE_DESCRIPTION() macro.

Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240609-md-drivers-gpu-drm-tiny-v1-1-6905fe4ada50@quicinc.com

drm/panel: add missing MODULE_DESCRIPTION() macros

make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/panel/panel-abt-y030xx067a.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/panel/panel-auo-a030jtn01.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/panel/panel-innolux-ej030na.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/panel/panel-newvision-nv3052c.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/panel/panel-novatek-nt39016.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/panel/panel-orisetech-ota5601a.o

Add the missing invocations of the MODULE_DESCRIPTION() macro.

Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240609-md-drivers-gpu-drm-panel-v1-1-04b2a1ae7412@quicinc.com

drm/tests: add missing MODULE_DESCRIPTION() macros

make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/tests/drm_kunit_helpers.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/tests/drm_buddy_test.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/tests/drm_cmdline_parser_test.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/tests/drm_connector_test.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/tests/drm_damage_helper_test.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/tests/drm_dp_mst_helper_test.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/tests/drm_exec_test.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/tests/drm_format_test.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/tests/drm_framebuffer_test.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/tests/drm_gem_shmem_test.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/tests/drm_managed_test.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/tests/drm_mm_test.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/tests/drm_modes_test.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/tests/drm_plane_helper_test.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/tests/drm_probe_helper_test.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/tests/drm_rect_test.o

Add the missing invocations of the MODULE_DESCRIPTION() macro.

Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240606-md-drivers-gpu-drm-tests-v1-1-228ca6213969@quicinc.com

drm/tiny: panel-mipi-dbi: Support the pixel format property

Add support for these pixel format property values:
- r5g6b5, RGB565
- b6x2g6x2r6x2, BGR666

BGR666 is presented to userspace as RGB888. The 2 LSB in each color
are discarded by the controller. The pixel is sent on the wire using
8 bits per word (little endian) so the controller sees it as BGR.

RGB565 is the default if the property is not present.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240604-panel-mipi-dbi-rgb666-v4-5-d7c2bcb9b78d@tronnes.org
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>

drm/mipi-dbi: Add support for DRM_FORMAT_RGB888

DRM_FORMAT_RGB888 is 24 bits per pixel and it would be natural to send it
on the SPI bus using a 24 bits per word transfer. The problem with this
is that not all SPI controllers support 24 bpw.

Since DRM_FORMAT_RGB888 is stored in memory as little endian and the SPI
bus is big endian we use 8 bpw to always get the same pixel format on the
bus: b8g8r8.

The MIPI DCS specification lists the standard commands that can be sent
over the MIPI DBI interface. The set_address_mode (36h) command has one
bit in the parameter that controls RGB/BGR order. This means that the
controller can be configured to receive the pixel as BGR.

RGB888 is rarely supported on these controllers but RGB666 is very common.
All datasheets I have seen do at least support the pixel format option
where each color is sent as one byte and the 6 MSB's are used.

All this put together means that we can send each pixel as b8g8r8 and an
RGB666 capable controller sees this as b6x2g6x2r6x2.

v4:
- s/emulation_format/pixel_format/ (Dmitry)

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240604-panel-mipi-dbi-rgb666-v4-4-d7c2bcb9b78d@tronnes.org
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>

drm/mipi-dbi: Make bits per word configurable for pixel transfers

MIPI DCS write/set commands have 8 bit parameters except for the
write_memory commands where it depends on the pixel format.
drm_mipi_dbi does currently only support RGB565 which is 16-bit and it
has to make sure that the pixels enters the SPI bus in big endian format
since the MIPI DBI spec doesn't have support for little endian.

drm_mipi_dbi is optimized for DBI interface option 3 which means that the
16-bit bytes are swapped by the upper layer if the SPI bus does not
support 16 bits per word, signified by the swap_bytes member.

In order to support both 16-bit and 24-bit pixel transfers we need a way
to tell the DBI command layer the format of the buffer. Add a
write_memory_bpw member that the upper layer can use to tell how many
bits per word to use for the SPI transfer.

v4:
- Expand the commit message (Dmitry)

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240604-panel-mipi-dbi-rgb666-v4-3-d7c2bcb9b78d@tronnes.org
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>

drm/mipi-dbi: Remove mipi_dbi_machine_little_endian()

mipi_dbi_machine_little_endian() should really have been called
mipi_dbi_framebuffer_little_endian() because that's the function it
performs. When I added support for these SPI displays I thought that the
framebuffers on big endian machines were also big endian, but I have
later learned that this is not the case. There's a bit in the fourcc code
that controls this: DRM_FORMAT_BIG_ENDIAN.

Just remove the function to avoid confusion. We can add big endian support
later should the need arise and we have hardware to test on.

Instead of just amending the docs, expand it to explain the endianness
handling.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240604-panel-mipi-dbi-rgb666-v4-2-d7c2bcb9b78d@tronnes.org
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>

dt-bindings: display: panel: mipi-dbi-spi: Add a pixel format property

The MIPI DBI 2.0 specification (2005) lists only two pixel formats for
the Type C Interface (SPI) and that is 3-bits/pixel RGB111 with
2 options for bit layout.

For Type A and B (parallel) the following formats are listed: RGB332,
RGB444, RGB565, RGB666 and RGB888 (some have 2 options for the bit layout).

Many MIPI DBI compatible controllers support all interface types on the
same chip and often the manufacturers have chosen to provide support for
the Type A/B interface pixel formats also on the Type C interface.

Some chips provide many pixel formats with optional bit layouts over SPI,
but the most common by far are RGB565 and RGB666. So even if the
specification doesn't list these formats for the Type C interface, the
industry has chosen to include them.

The MIPI DCS specification lists the standard commands that can be sent
over the MIPI DBI interface. The set_address_mode (36h) command has one
bit in the parameter that controls RGB/BGR order:
    This bit controls the RGB data latching order transferred from the
    peripheral’s frame memory to the display device.
This means that each supported RGB format also has a BGR variant.

Based on this rationale document the following pixel formats describing
the bit layout going over the wire:
- RGB111 (option 1): x2r1g1b1r1g1b1 (2 pixels per byte)
- BGR111 (option 1): x2b1g1r1b1g1r1 (2 pixels per byte)
- RGB111 (option 2): x1r1g1b1x1r1g1b1 (2 pixels per byte)
- BGR111 (option 2): x1b1g1r1x1b1g1r1 (2 pixels per byte)
- RGB565: r5g6b5 (2 bytes)
- BGR565: b5g6r5 (2 bytes)
- RGB666: r6x2g6x2b6x2 (3 bytes)
- BGR666: b6x2g6x2r6x2 (3 bytes)
(x: don't care)

v2:
- Use 'default: r5g6b5' (Rob)

Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240604-panel-mipi-dbi-rgb666-v4-1-d7c2bcb9b78d@tronnes.org
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>

drm/i915: Don't use __func__ as prefix for drm_dbg_printer

Updated code of drm_dbg_printer() is already printing symbolic
name of the caller like drm_dbg() does.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240517163406.2348-4-michal.wajdeczko@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/print: Improve drm_dbg_printer

With recent introduction of a generic drm dev printk function, we
can now store and use location where drm_dbg_printer was invoked
and output it's symbolic name like we do for all drm debug prints.

Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240517163406.2348-3-michal.wajdeczko@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/print: Add generic drm dev printk function

We already have some drm printk functions that need to duplicate
a code to get a similar format of the final result, for example:

  [ ] 0000:00:00.0: [drm:foo] bar
  [ ] 0000:00:00.0: [drm] foo bar
  [ ] 0000:00:00.0: [drm] *ERROR* foo

Add a generic __drm_dev_vprintk() function that can format the
final message like all other existing function do and allows us
to keep the formatting code in one place.

Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240517163406.2348-2-michal.wajdeczko@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>