drm/i915: Add WA for planes ending close to left screen edge

While running the kms_plane clipping test I noticed a similar problem to
the one described in Display WA #1175. In this case, similarly for
planes other than the cursor, with 1 or 3 pixels visible from the left
edge of the screen to the end of the plane and an odd plane X offset
used for clipping causes the same kind of underflow and display
corruption as described for WA #1175. Fix this in a similar way as that
WA rejecting planes ending <4 pixels from the left screen edge.

v2:
- Rebase on v2 of patch 1/1.

Testcase: igt/kms_plane/plane-clipping-pipe-*-planes
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180116112415.22060-2-imre.deak@intel.com

drm/i915: Add display WA #1175 for planes ending close to right screen edge

As described in the WA on GLK and CNL planes on the right edge of the
screen that have less than 4 pixels visible from the beginning of the
plane to the edge of the screen can cause FIFO underflow and display
corruption.

On GLK/CNL I could trigger the problem only if the plane was at the same
time also aligned to the top edge of the screen (after clipping) and
there were exactly 2 pixels visible from the start of the plane to the
right edge of the screen (so couldn't trigger it with 1 or 3 pixels
visible). Nevertheless, to be sure, I also applied the WA for these cases.

I also couldn't see any problem with the cursor plane and later Art
confirmed that it's not affected, so the WA is applied only for the
other plane types.

v2:
- Use -ERANGE instead of -EINVAL. (Chris)

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180116112415.22060-1-imre.deak@intel.com

drm/i915/cnp: Properly handle VBT ddc pin out of bounds.

If the table result is out of bounds on the array map
there is something really wrong with VBT pin so we don't
return that vbt_pin, but only return 0 instead.

This basically reverts commit 'a8e6f3888b05 ("drm/i915/cnp:
Ignore VBT request for know invalid DDC pin.")'

Also this properly fixes commit 9c3b2689d01f ("drm/i915/cnl:
Map VBT DDC Pin to BSpec DDC Pin.")

v2: Do in a way that we don't break other platforms. (Jani)

v3: Keep debug message (Jani)

v4: Don't mess with 0 mapping was noticed by Jani and
    addressed with a simple solution suggested by Lucas
    that makes this even simpler.

Fixes: a8e6f3888b05 ("drm/i915/cnp: Ignore VBT request for know invalid DDC pin.")
Fixes: 9c3b2689d01f ("drm/i915/cnl: Map VBT DDC Pin to BSpec DDC Pin.")
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Kai Heng Feng <kai.heng.feng@canonical.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Suggested-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180125222524.22059-1-rodrigo.vivi@intel.com

drm/i915: Assert that we do not try to unsubmit a completed request

Assert that we do not try to unsubmit a completed request, as should we
try to resubmit it later, the ring is already past the request's
breadcrumb and the breadcrumb will not be updated.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180129094912.14428-1-chris@chris-wilson.co.uk
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>

drm/i915: Simplify guard logic for setup_scratch_page()

Older gcc is complaining it can't follow the guards and thinks that
addr may be used uninitialised

In the process, we can simplify down to one loop,
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-131 (-131)
Function                                     old     new   delta
setup_scratch_page                           545     414    -131

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180129102840.19901-1-chris@chris-wilson.co.uk

Merge drm-next into drm-intel-next-queued

Pull 4.15 into drm-intel-next-queued for next feature pull.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

Revert "drm/i915: mark all device info struct with __initconst"

This reverts commit 5b54eddd3920e9f6f1a6d972454baf350cbae77e.

 Conflicts:
drivers/gpu/drm/i915/i915_pci.c

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104805
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: 5b54eddd3920 ("drm/i915: mark all device info struct with __initconst")
Link: https://patchwork.freedesktop.org/patch/msgid/20180129083346.29173-1-lionel.g.landwerlin@intel.com

drm/i915/lrc: Remove superfluous WARN_ON

Remove the WARN_ON(ce->state) inside the static function only called
when ce->state == NULL and downgrade the w/a batch setup warning into a
developer only mode (GEM_WARN_ON).

v2: Move the deferred alloc guard into the callee, eliminating the need
for the WARN_ON:
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-1 (-1)
Function                                     old     new   delta
execlists_context_pin                       1819    1818      -1

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180126121846.12007-1-chris@chris-wilson.co.uk

drm/i915/lrc: Clear context restore/save inhibit flags for new contexts

CTX_CONTEXT_CONTROL (CTX_SR_CTL) operates as a masked register and so
will only apply the bits that are selected by the upper half. In the
case of selectively enabling sr inhibit, this may mean the context keeps
the current setting (so forgetting to save the context later, eventually
leading to a very upset GPU!).

Fixes: 517aaffe0c1b ("drm/i915/execlists: Inhibit context save/restore for the fake preempt context")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180125112443.12745-1-chris@chris-wilson.co.uk
Reviewed-by: Michel Thierry <michel.thierry@intel.com>

Merge tag 'drm-misc-next-fixes-2018-01-18' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

Fixes for 4.16:

Fixes one Kconfig issue and a enable some panels to work properly.
There is also a fix of error code return in sun4i.

* tag 'drm-misc-next-fixes-2018-01-18' of git://anongit.freedesktop.org/drm/drm-misc:
  drm: Fix PANEL_ORIENTATION_QUIRKS breaking the Kconfig DRM menuconfig
  drm/panel: lvds: Handle the optional regulator case properly
  drm/sun4i: Fix error code in sun4i_tcon_bind()

Merge branch 'drm-next-4.16' of git://people.freedesktop.org/~agd5f/linux into drm-next

 A few more fixes for 4.16, nothing major.

A few more fixes for 4.16.  This is on top of the pull request from
last week.  Most notable change here is a fix to the link order for
the now separate from amdgpu GPU scheduler to fix crashes when the
modules are build into the kernel rather than as modules.

* 'drm-next-4.16' of git://people.freedesktop.org/~agd5f/linux:
  drm: fix gpu scheduler link order
  drm/amd/display: Demote error print to debug print when ATOM impl missing
  drm/amdgpu: Avoid leaking PM domain on driver unbind (v2)
  drm/amd/amdgpu: Add Polaris version check
  drm/amdgpu: Reenable manual GPU reset from sysfs
  drm/amdgpu: disable MMHUB power gating on raven
  drm/ttm: Don't unreserve swapped BOs that were previously reserved
  drm/ttm: Don't add swapped BOs to swap-LRU list
  drm/amdgpu: only check for ECC on Vega10
  drm/amd/powerplay: Fix smu_table_entry.handle type
  drm/ttm: add VADDR_FLAG_UPDATED_COUNT to correctly update dma_page global count
  drm/radeon: fill in rb backend map on evergreen/ni.
  drm/amdgpu/gfx9: fix ngg enablement to clear gds reserved memory (v2)
  drm/ttm: only free pages rather than update global memory count together
  drm/amdgpu: fix CPU based VM updates
  drm/amdgpu: fix typo in amdgpu_vce_validate_bo
  drm/amdgpu: fix amdgpu_vm_pasid_fault_credit
  drm/ttm: check the return value of register_shrinker
  drm/radeon: fix sparse warning: Should it be static?

drm: fix gpu scheduler link order

It should initialize before the drivers using it.

Signed-off-by: Christian König <christian.koenig@amd.com>
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=104736
Reviewed-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Demote error print to debug print when ATOM impl missing

I assumed wrongfully that all relevant functions should be implemented.
Apparently this isn't the case. Demote the print to debug level for now.

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/i915/guc: Fix comments style in intel_guc_log.c

Use consistent multi-line comment style as per guideline.

v2: Reverted comments prefix update to kernel-doc comment. (Chris)

Suggested-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1516808821-3638-5-git-send-email-sagar.a.kamble@intel.com

drm/i915/guc: Update name and prototype of i915_guc_log_control

i915_guc_log_control is GuC interface and GuC APIs that are not user
facing should be named with "intel_guc" prefix hence we change name to
intel_guc_log_control. Also changed the parameter to intel_guc struct.

v2: Move log vma check to intel_guc_log_control (Michal)
    Return -ENODEV when log isn't initialized. (Chris)

Suggested-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1516808821-3638-4-git-send-email-sagar.a.kamble@intel.com

drm/i915/guc: Fix lockdep due to log relay channel handling under struct_mutex

This patch fixes lockdep issue due to circular locking dependency of
struct_mutex, i_mutex_key, mmap_sem, relay_channels_mutex.
For GuC log relay channel we create debugfs file that requires i_mutex_key
lock and we are doing that under struct_mutex. So we introduced newer
dependency as:
    &dev->struct_mutex --> &sb->s_type->i_mutex_key#3 --> &mm->mmap_sem
However, there is dependency from mmap_sem to struct_mutex. Hence we
separate the relay create/destroy operation from under struct_mutex.
Also added runtime check of relay buffer status.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
======================================================
WARNING: possible circular locking dependency detected
4.15.0-rc6-CI-Patchwork_7614+ #1 Not tainted
------------------------------------------------------
debugfs_test/1388 is trying to acquire lock:
 (&dev->struct_mutex){+.+.}, at: [<00000000d5e1d915>] i915_mutex_lock_interruptible+0x47/0x130 [i915]

but task is already holding lock:
 (&mm->mmap_sem){++++}, at: [<0000000029a9c131>] __do_page_fault+0x106/0x560

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #3 (&mm->mmap_sem){++++}:
       _copy_to_user+0x1e/0x70
       filldir+0x8c/0xf0
       dcache_readdir+0xeb/0x160
       iterate_dir+0xdc/0x140
       SyS_getdents+0xa0/0x130
       entry_SYSCALL_64_fastpath+0x1c/0x89

-> #2 (&sb->s_type->i_mutex_key#3){++++}:
       start_creating+0x59/0x110
       __debugfs_create_file+0x2e/0xe0
       relay_create_buf_file+0x62/0x80
       relay_late_setup_files+0x84/0x250
       guc_log_late_setup+0x4f/0x110 [i915]
       i915_guc_log_register+0x32/0x40 [i915]
       i915_driver_load+0x7b6/0x1720 [i915]
       i915_pci_probe+0x2e/0x90 [i915]
       pci_device_probe+0x9c/0x120
       driver_probe_device+0x2a3/0x480
       __driver_attach+0xd9/0xe0
       bus_for_each_dev+0x57/0x90
       bus_add_driver+0x168/0x260
       driver_register+0x52/0xc0
       do_one_initcall+0x39/0x150
       do_init_module+0x56/0x1ef
       load_module+0x231c/0x2d70
       SyS_finit_module+0xa5/0xe0
       entry_SYSCALL_64_fastpath+0x1c/0x89

-> #1 (relay_channels_mutex){+.+.}:
       relay_open+0x12c/0x2b0
       intel_guc_log_runtime_create+0xab/0x230 [i915]
       intel_guc_init+0x81/0x120 [i915]
       intel_uc_init+0x29/0xa0 [i915]
       i915_gem_init+0x182/0x530 [i915]
       i915_driver_load+0xaa9/0x1720 [i915]
       i915_pci_probe+0x2e/0x90 [i915]
       pci_device_probe+0x9c/0x120
       driver_probe_device+0x2a3/0x480
       __driver_attach+0xd9/0xe0
       bus_for_each_dev+0x57/0x90
       bus_add_driver+0x168/0x260
       driver_register+0x52/0xc0
       do_one_initcall+0x39/0x150
       do_init_module+0x56/0x1ef
       load_module+0x231c/0x2d70
       SyS_finit_module+0xa5/0xe0
       entry_SYSCALL_64_fastpath+0x1c/0x89

-> #0 (&dev->struct_mutex){+.+.}:
       __mutex_lock+0x81/0x9b0
       i915_mutex_lock_interruptible+0x47/0x130 [i915]
       i915_gem_fault+0x201/0x790 [i915]
       __do_fault+0x15/0x70
       __handle_mm_fault+0x677/0xdc0
       handle_mm_fault+0x14f/0x2f0
       __do_page_fault+0x2d1/0x560
       page_fault+0x4c/0x60

other info that might help us debug this:

Chain exists of:
  &dev->struct_mutex --> &sb->s_type->i_mutex_key#3 --> &mm->mmap_sem

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&mm->mmap_sem);
                               lock(&sb->s_type->i_mutex_key#3);
                               lock(&mm->mmap_sem);
  lock(&dev->struct_mutex);

 *** DEADLOCK ***

1 lock held by debugfs_test/1388:
 #0:  (&mm->mmap_sem){++++}, at: [<0000000029a9c131>] __do_page_fault+0x106/0x560

stack backtrace:
CPU: 2 PID: 1388 Comm: debugfs_test Not tainted 4.15.0-rc6-CI-Patchwork_7614+ #1
Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./J4205-ITX, BIOS P1.10 09/29/2016
Call Trace:
 dump_stack+0x5f/0x86
 print_circular_bug.isra.18+0x1d0/0x2c0
 __lock_acquire+0x14ae/0x1b60
 ? lock_acquire+0xaf/0x200
 lock_acquire+0xaf/0x200
 ? i915_mutex_lock_interruptible+0x47/0x130 [i915]
 __mutex_lock+0x81/0x9b0
 ? i915_mutex_lock_interruptible+0x47/0x130 [i915]
 ? i915_mutex_lock_interruptible+0x47/0x130 [i915]
 ? i915_mutex_lock_interruptible+0x47/0x130 [i915]
 i915_mutex_lock_interruptible+0x47/0x130 [i915]
 ? __pm_runtime_resume+0x4f/0x80
 i915_gem_fault+0x201/0x790 [i915]
 __do_fault+0x15/0x70
 ? _raw_spin_unlock+0x29/0x40
 __handle_mm_fault+0x677/0xdc0
 handle_mm_fault+0x14f/0x2f0
 __do_page_fault+0x2d1/0x560
 ? page_fault+0x36/0x60
 page_fault+0x4c/0x60

v2: Added lock protection to guc->log.runtime.relay_chan (Chris)
    Fixed locking inside guc_flush_logs uncovered by new lockdep.

v3: Locking guc_read_update_log_buffer entirely with relay_lock. (Chris)
    Prepared intel_guc_init_early. Moved relay_lock inside relay_create
    relay_destroy, relay_file_create, guc_read_update_log_buffer. (Michal)
    Removed struct_mutex lock around guc_log_flush and removed usage
    of guc_log_has_relay() from runtime_create path as it needs
    struct_mutex lock.

v4: Handle NULL relay sub buffer pointer earlier in read_update_log_buffer
    (Chris). Fixed comment suffix **/. (Michal)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104693
Testcase: igt/debugfs_test/read_all_entries # with enable_guc=1 and guc_log_level=1
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Marta Lofstedt <marta.lofstedt@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1516808821-3638-3-git-send-email-sagar.a.kamble@intel.com

drm/i915/guc: Enable interrupts before resuming GuC during runtime resume

GuC log streaming needs interrupts enabled prior to GuC resume but
runtime pm interrupt setup was happening post GuC resume. Fix it.
While at it, fix the unwinding of steps in the runtime suspend path.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104695
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Marta Lofstedt <marta.lofstedt@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1516808821-3638-2-git-send-email-sagar.a.kamble@intel.com

drm/i915/guc: Grab RPM wakelock while disabling GuC interrupts

Disabling GuC interrupts involves access to GuC IRQ control registers
hence ensure device is RPM awake.

v1-v2: old changelog
1: Add comment about need to synchronize flush work and log runtime
   destroy
2: Moved patch earlier in the series and removed comment about future
work. (Tvrtko)

v3: Added assert_rpm_wakelock_held() to gen9_*_guc_interrupts. (Chris)

Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1516808821-3638-1-git-send-email-sagar.a.kamble@intel.com

drm/i915: Add a comment exlaining CCS hsub/vsub

Let's document why we claim hsub==8,vsub==16 for CCS.

v2: Replace my explanation with Jason's

Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Stone <daniels@collabora.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180119144152.17224-1-ville.syrjala@linux.intel.com
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

drm/i915: Implement display w/a #1143

Apparently SKL/KBL/CFL need some manual help to get the
programmed HDMI vswing to stick. Implement the relevant
workaround (display w/a #1143).

Note that the relevant chicken bits live in a transcoder register
even though the bits affect a specific DDI port rather than a
specific transcoder. Hence we must pick the correct transcoder
register instance based on the port rather than based on the
cpu_transcoder.

Also note that for completeness I included support for DDI A/E
in the code even though we never have HDMI on those ports.

v2: CFL needs the w/a as well (Rodrigo and Art)

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Art Runyan <arthur.j.runyan@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180122174131.28046-1-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Use enum plane_id for frontbuffer tracking

Replace the ad-hoc plane indexing scheme used by the frontbuffer
tracking with enum plane_id.

The old video overlay not being part of the plane_id namespace
will just be given the high bit.

v2: Drop the unintended whitespace change (Chris)

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180123183343.9181-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Shrink the GEM kmem_caches upon idling

When we finally decide the gpu is idle, that is a good time to shrink
our kmem_caches.

v3: Defer until an rcu grace period after we idle.
v4: Think about epoch wraparound and how likely that is.
v5: Use I915_EPOCH_INVALID magic.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180124113608.14909-2-chris@chris-wilson.co.uk

drm/i915: Track the number of times we have woken the GPU up

By counting the number of times we have woken up, we have a very simple
means of defining an epoch, which will come in handy if we want to
perform deferred tasks at the end of an epoch (i.e. while we are going
to sleep) without imposing on the next activity cycle.

v2: No reason to specify precise number of bits here.
v3: Take Tvrtko's advice and reserve 0 as an invalid epoch.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180124113608.14909-1-chris@chris-wilson.co.uk

drm/i915/execlists: Inhibit context save/restore for the fake preempt context

We only use the preempt context to inject an idle point into execlists.
We never need to reference its logical state, so tell the GPU never to
load it or save it.

v2: BIT(2) for save-inhibit.

N.B. Daniele mentioned this bit mbz for ICL, and has been moved into the
submission process rather than the context image.

Suggested-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180123210412.17653-1-chris@chris-wilson.co.uk

drm/i915: Move LRC register offsets to a header file

Newer platforms may have subtle offset changes, which will increase the
number of defines, so it is probably better to start moving them to its
own header file. Also move the macros used while setting the reg state.

v2: Rename to intel_lrc_reg.h, to be consistent with i915_reg.h and
intel_guc_reg.h (Chris)
v3: License notice shenanigans.
v4: Documentation/process/coding-style.rst is always right (Chris)
v5: Rebase.

Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180124004349.22126-2-michel.thierry@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915/lrc: Update reg_state macros to pass checkpatch

The macros we use to init the reg_state had the following issues reported
by checkpatch --strict.

  Macro argument reuse 'reg_state' - possible side-effects
  Macro argument reuse 'pos' - possible side-effects
  Macro argument reuse 'ppgtt' - possible side-effects
  spaces preferred around that '+' (ctx:VxV)

So fix these issues before they are moved to a new header file.

Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180124004349.22126-1-michel.thierry@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915/pmu: Fix sysfs exported counter config

We need to generate the event config value using the uAPI class and not
the driver internal one.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 109ec558370f ("drm/i915/pmu: Only enumerate available counters in sysfs")
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180123134558.3222-1-tvrtko.ursulin@linux.intel.com

drm/i915/cnl: Fix aux selection for WA 1178

Current code always select _CNL_AUX_ANAOVRD1_B
register regardless the pw in use.

CNL_DISP_PW_AUX_B = 9
CNL_DISP_PW_AUX_C = 10
CNL_DISP_PW_AUX_D = 11

And for pick we want

B = 0
C = 1
D = 2

Fixes: ddd39e4b3f8f ("drm/i915/cnl: apply Display WA #1178 to fix type C dongles")
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180123215245.24026-1-rodrigo.vivi@intel.com

drm/i915/cnp: Ignore VBT request for know invalid DDC pin.

Let's ignore VBT request if the pin is clearly wrong.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104139
Cc: Kai Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180123174050.4261-1-rodrigo.vivi@intel.com
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>

drm/amdgpu: Avoid leaking PM domain on driver unbind (v2)

We only support vga_switcheroo and runtime pm on PX/HG systems
so forcing runpm to 1 doesn't do anything useful anyway.

Only call vga_switcheroo_init_domain_pm_ops() for PX/HG so
that the cleanup path is correct as well.  This mirrors what
radeon does as well.

v2: rework the patch originally sent by Lukas (Alex)

Acked-by: Lukas Wunner <lukas@wunner.de>
Reported-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de> (v1)
Cc: stable@vger.kernel.org

drm/amd/amdgpu: Add Polaris version check

Add Polaris version check if firmware support UVD encode

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amdgpu: Reenable manual GPU reset from sysfs

Otherwise it keeps rejecting the reset.

Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/i915/execlists: Skip forcewake for ELSP submission

Now that we can read the CSB from the HWSP, we may avoid having to
perform mmio reads entirely and so forgo the rigmarole of the forcewake
dance.

v2: Include forcewake hint for GEM_TRACE readback of mmio. If we don't
hold fw ourselves, the reads may return garbage.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180122100714.15137-1-chris@chris-wilson.co.uk

drm/i915: Increase render/media power gating hysteresis for gen9+

On gen9+, after an idle period the HW will disable the entire power well
to conserve power (by preventing current leakage). It takes around a 100
microseconds to bring the power well back online afterwards. With the
current hysteresis value of 25us (really 25 * 1280ns), we do not have
sufficient time to respond to an interrupt and schedule the next execution
before the HW powers itself down. (At present, we prevent this by
grabbing the forcewake for prolonged periods of time, but that overkill
fixed in the next patch.) The minimum we want to set the power gating
hysteresis to is the length of time it takes us to service the GPU, which
across a broad spectrum of machines is about 250us.

(Note this also brings guc latency into the same ballpark as execlists.)

v2: Include some notes on where I plucked the numbers from.

Testcase: igt/gem_exec_nop/sequential
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180122135541.32222-1-chris@chris-wilson.co.uk

drm/i915: Per-engine scratch VMA is mandatory

We fail engine initialization if the scratch VMA cannot be created so
there is no point in error handle it later. If the initialization ordering
gets messed up, we can explode during development just as well.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180119100005.9072-2-tvrtko.ursulin@linux.intel.com

drm/i915: Downgrade incorrect engine constructor usage warnings to development

Render engine constructor helpers must only be called from the render
engine constructors, but there is no need to burden the production
binaries with warnings which can only be triggered during development.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180119100005.9072-1-tvrtko.ursulin@linux.intel.com

drm/i915/edp: Do not do link training fallback or prune modes on EDP

In case of eDP because the panel has a fixed mode, the link rate
and lane count at which it is trained corresponds to the link BW
required to support the native resolution of the panel. In case of
panles with lower resolutions where fewer lanes are hooked up internally,
that number is reflected in the MAX_LANE_COUNT DPCD register of the panel.
So it is pointless to fallback to lower link rate/lane count in case
of link training failure on eDP connector since the lower link BW
will not support the native resolution of the panel and we cannot
prune the preferred mode on the eDP connector.

In case of Link training failure on the eDP panel, something is wrong
in the HW internally and hence driver errors out with a loud
and clear DRM_ERROR message.

v2:
* Fix the DEBUG_ERROR and add {} in else (Ville Syrjala)

Cc: Clinton Taylor <clinton.a.taylor@intel.com>
Cc: Jim Bride <jim.bride@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Reference: https://bugs.freedesktop.org/show_bug.cgi?id=103369
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1507835618-23051-1-git-send-email-manasi.d.navare@intel.com

drm/i915: Protect WC stash allocation against direct reclaim

As we attempt to allocate pages for use in a new WC stash, direct
reclaim may run underneath us and fill up the WC stash. We have to be
careful then not to overflow the pvec.

Fixes: 66df1014efba ("drm/i915: Keep a small stash of preallocated WC pages")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103109
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180121173143.17090-1-chris@chris-wilson.co.uk

drm/i915/psr: Don't name status or debug registers like control registers.

Avoids some typo pitfalls.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171220201021.17619-1-dhinakaran.pandiyan@intel.com

drm/amdgpu: disable MMHUB power gating on raven

MMHUB power gating still has issue, and doesn't work on raven at current. So
disable it for the moment.

Signed-off-by: Huang Rui <ray.huang@amd.com>
Acked-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/i915: Shrink the request kmem_cache on allocation error

If we fail to allocate a new request, make sure we recover the pages
that are in the process of being freed by inserting an RCU barrier.

v2: Comment before the shrink and barrier in the error path.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180119144657.22606-1-chris@chris-wilson.co.uk

drm/i915/guc: Keep GuC log disabled by default

It looks that GuC log functionality is not fully functional yet and
causes issues when enabled by auto(-1) modparam on debug builds.
For example, but not limited to:

[   30.062893] ======================================================
[   30.062894] WARNING: possible circular locking dependency detected
[   30.062895] 4.15.0-rc8-CI-CI_DRM_3648+ #1 Tainted: G     U
[   30.062896] ------------------------------------------------------
[   30.062897] debugfs_test/1268 is trying to acquire lock:
[   30.062898]  (&dev->struct_mutex){+.+.}, at: [<00000000e4213449>] i915_mutex_lock_interruptible+0x47/0x130 [i915]
[   30.062921]
               but task is already holding lock:
[   30.062921]  (&mm->mmap_sem){++++}, at: [<00000000dd7adc93>] __do_page_fault+0x106/0x560
[   30.062924]
               which lock already depends on the new lock.

References: 0ed87953532652 ("drm/i915/guc: Redefine guc_log_level modparam values")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104693
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104694
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104695
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Saarinen <jani.saarinen@intel.com>
Cc: Tomi Sarvela <tomi.p.sarvela@intel.com>
Cc: Marta Lofstedt <marta.lofstedt@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180119124926.29844-1-michal.wajdeczko@intel.com
Reviewed-by: Michal Winiarski <michal.winiarski@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915/icl: Gen11 render context size

Gen11 removes the Resource Streamer, which frees up a big chunk of
the context image. BSpec indicates 12544 DWORDs (13 pages), plus
one page for PPHWSP.

Please notice that, when looking at the BSpec context image table,
the right filter has to be applied as some rows are excluded for
specific GENs. Also, some rows apply per-subslice (for the
calculation above, we have supposed I915_MAX_SUBSLICES = 8).

v2: Rebase.
v3: Use the right size as per the BSpec.
v4:
  - Rebased on top of the default context size (Rodrigo)
  - Clarify in the commit message where the subslice calculation
    comes from.
v5: s/12538/12544/ (Daniele)

BSpec: 18907

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Ben Widawsky <benjamin.widawsky@intel.com> (older version)
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1515711307-28979-2-git-send-email-oscar.mateo@intel.com

drm/i915: Return a default RCS context size

Instead of returning whatever size the latest GEN used. This is because
context sizes for new GENs can go up or down, but the only safe thing to
do for missing cases is to use the largest known one, whatever that is.

Suggested-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1515711307-28979-1-git-send-email-oscar.mateo@intel.com

drm/i915/icl: Icelake interrupt register addresses and bits

MMIO addresses and register definition for the new interrupt
registers in Gen11.

v2: Removed spelt out VCS and VECS bit definitions. (Daniel Vetter)
v3: Adjust VCS and VECS. (Daniele Ceraolo Spurio)
v4: Bikeshedding (Paulo).

Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180109232336.11029-5-paulo.r.zanoni@intel.com

drm/i915/icp: Add the ID for ICL PCH - ICP

Add the PCI ID for the ICL PCH - ICP.

v2: rebased.
v3: rebased.
v4: fix ICP name.
v5: fix the ID mask (Fei Li).
v6 (from Paulo): bikesheds.

Cc: Li, Fei <fei.li@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180111180010.24357-9-paulo.r.zanoni@intel.com

drm/i915/icp: add ICP gmbus and gpio support

In ICP, there are three TC ports and 3 DDI ports.

v2:
 - Correct Pin mapping.
v3:
 - Update pin mapping into per platform implementation
   rather than previous approach of port wise mapping.
v4:
 - Update GMBUS_NUM_PINS (Paulo)
v5:
 - rebase.
v6:
 - Update function name, GMBUS_PIN_NUM (Paulo)
v7 (from Paulo):
 - Make it apply.
v8 (from Paulo):
 - Maintain consistent if ladder ordering.

Suggested by: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180111180010.24357-8-paulo.r.zanoni@intel.com

drm/i915/icp: Add backlight Support for ICP

ICP has two backlight controllers - similar to previous platforms like
BXT -, but we only use one controller for now, so we can just reuse
the CNP code.

v2: Remove the usage of ICP_SECOND_PPS_BACKLIGHT register.(Jani)
Reuse CNP code since it is very similar.(Ville)
v3 (from Paulo): Rebase.
v4 (from Paulo): adjust commit message (James) and comment (Rodrigo).

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: James Ausmus <james.ausmus@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180119184812.2888-1-paulo.r.zanoni@intel.com
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>

drm/i915/icp: Add Panel Power Sequencing Support

ICP, like BXT, has has two panel power sequencers.

v2: Simplify the code. Remove unwanted register definitions.
Make code as close to BXT style as possible. (Ville)
Also, remove the use of ICP_SECOND_PPS_BACKLIGHT for now.
Moving forward, if we are sure we need to set this register,
we can access it.

v3: Use INTEL_GEN(dev_priv), make code more readeable. (Ville)

v4 (from Paulo):
 - Coding style fixes.
 - Add a missing HAS_PCH_CNP -> gen10+ check.
 - Rebase.

v5: Use per platform checks rather than INTEL_GEN().
    v4 of this patch breaks on CoffeeLake, since CFL uses
    CNP and per platform check makes sense in that case.

v6 (from Paulo):
 - v5 was a patch on top of v4, not a new version. Now v6 is correctly
   a new version of the original patch.

Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180111180010.24357-6-paulo.r.zanoni@intel.com

drm/i915/icp: Get/set proper Raw clock frequency on ICP

Add register definitions for setting the rawclock.
Set the numerator,denominator and divider values.

v2: Simplify the commit message. Simplify the math.
Add  register bits for numerator. (Paulo)
v3 (from Paulo): coding style bikesheds.

Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180111180010.24357-5-paulo.r.zanoni@intel.com

drm/i915/icp: Introduce Ice Lake PCH

Add the enum additions to ICP PCH.

v2 (from Paulo): don't set any platforms to it yet since ICP support is
incomplete.
v3 (from Rodrigo): Fix ICP name.

Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180111180010.24357-4-paulo.r.zanoni@intel.com

drm/i915/icl: Add initial Icelake definitions.

Icelake is an Intel® Processor containing an Intel® Graphics
Controller.

This is just an initial Icelake definition. PCI IDs, Icelake support
and new features coming in following patches.

v2: Add .ddb_size and .has_guc (Michal Wajdeczko).
v3: Add the ICL_FEATURES macro (Kelvin Gardiner).
v4 (from Paulo): Add missing __initconst (Paulo) and say "graphics
controller" instead of something that looks like an official marketing
name but isn't (Chris).

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180111180010.24357-3-paulo.r.zanoni@intel.com

drm/i915/cnl: Add Port F definition.

Some Cannonlake SKUs will come with a full split between
port A and port E. This will be called port F although it
is not a 6th port, but only a split.

Note this patch alone is not sufficient for port F enabling,
it's just the first step.

v2: Fix size of dvo_ports found by Ander.
v3: Adding missing cases from intel_bios.c for Port_F
v4: Adding other missing cases and fix the commit message.
v5: Rebase on top of display headers rework.
v6 (from Paulo): improve commit message, bikeshed bit definitions.

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180111180010.24357-2-paulo.r.zanoni@intel.com

drm/i915: Check for fused or unused pipes

We may have fused or unused pipes in our system. Let's check that the pipe
in question is within limits of accessible pipes. In case, that we are not
able to access the pipe, we return early with a warning.

v2: Rephrasing of the commit message (Jani)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103206
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Jaswinder Singh Rajput <jaswinder@perfectintelligent.com>
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1513584243-12607-1-git-send-email-mika.kahola@intel.com

drm/i915: Allow up to 32KB stride on SKL+ "sprites"

SKL+ "sprites" no longer have 16KB max stride limit that earlier
platforms had. Bump up the limit to 32KB.

Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Stone <daniels@collabora.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171222192231.17981-7-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Add CCS capability for sprites

Allow sprites to scan out compressed framebuffers.

Since different platforms have a different set of planes that
support CCS let's add a small helper to determine whether a
specific plane supports CCS or not. Currently that information
is spread around in many places, and not all the pieces of
code even agree with each other.

In addition to allowing sprites to scan out compressed fbs,
the other fix here is that we stop rejecting them on pipe C
on CNL.

Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Stone <daniels@collabora.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171222192231.17981-6-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>

drm/i915: Clean up the sprite modifier checks

Split the g4x and snb cases into separate functions to match how we deal
with all other platforms. Also sort the switch cases to match the format
lists we've declared earlier, to ease comparisons.

Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Stone <daniels@collabora.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171222192231.17981-5-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Add the missing Y/Yf modifiers for SKL+ sprites

Y/Yf were dropped out from the SKL+ sprite modifier list on account
of some watermark issues Daniel Stone was having. My subsequent testing
seemed to indicate that things work better now, so add the modifiers
back in.

v2: Update the commit message with a better explanation

Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Stone <daniels@collabora.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171222192231.17981-4-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Nuke a pointless unreachable()

The unreachable() is very much unreachable and the compiler knows
that, so there's no point in having it.

Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Stone <daniels@collabora.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171222192231.17981-3-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Ignore TMDS clock limit for DP++ when EDID override is set

4K modes testing by using dummy EDID data has never been working
properly on boxes with DP++ (dual-mode) adaptors. The reason for
this is that those modes got pruned during hdmi mode validation.
intel_hdmi_mode_valid returns CLOCK_HIGH because the pixel clock
reported by the 4k mode is higher than dual port TMDS clock limit.

However 4k injection does work properly on machines that don't have
DP++ adapters because the mode is never validated against the DP++
TMDS clock limit.

v2: Don't detect the DP++ limits when we're testing using overridden
    EDIDs. Make sure to check for the override condition after
    respecting the value of drm_dp_dual_mode_detect (Jani Nikula).

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101649
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171215102055.11729-1-abdiel.janulgue@linux.intel.com

drm/i915: remove redundant ELD connector type update

drm_edid_to_eld() sets ELD connector type since commit 1d1c36650752
("drm/edid: set ELD connector type in drm_edid_to_eld()"). Remove the
redundant update.

(Commit c945b8c14bb7 ("drm/edid: build ELD in drm_add_edid_modes()") and
commit d471ed04b487 ("drm/drivers: drop redundant drm_edid_to_eld()
calls") are also related.)

v2: Rebase, update commit message with commit references.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171229125547.28672-1-jani.nikula@intel.com

drm/i915: vbt defs typo fixes

No more sing-a-ling.

Reported-by: Adam Jackson <ajax@redhat.com>
You're-my-ding-a-ling-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180118150613.26140-1-jani.nikula@intel.com

drm/ttm: Don't unreserve swapped BOs that were previously reserved

If ttm_bo_swapout doesn't own the lock, don't release it. Someone
else probably depends on it still being locked.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/ttm: Don't add swapped BOs to swap-LRU list

A BO that's already swapped would be added back to the swap-LRU list
for example if its validation failed under high memory pressure. This
could later lead to swapping it out again and leaking previous swap
storage.

This commit adds a condition to prevent that from happening.

v2: Check page_flags instead of swap_storage

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amdgpu: only check for ECC on Vega10

RV doesn't support it.

Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amd/powerplay: Fix smu_table_entry.handle type

The handle describes kernel logical address, should be
unsigned long and not uint32_t.
Fixes KASAN error and GFP on driver unload.

Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/ttm: add VADDR_FLAG_UPDATED_COUNT to correctly update dma_page global count

add this for correctly updating global mem count in ttm_mem_zone.
before that when ttm_mem_global_alloc_page fails, we would update all
dma_page's global mem count in ttm_dma->pages_list. but actually here
we should not update for the last dma_page.

v2: only the update of last dma_page is not right
v3: use lower bits of dma_page vaddr

Signed-off-by: Roger He <Hongbo.He@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/i915/bios: add DP max link rate to VBT child device struct

Update VBT defs to reflect revision 216. While at it, default the
expected child device struct size to sizeof the size rather than a
hardcoded value.

v2: Fix bit order (David)

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180118153310.32437-1-jani.nikula@intel.com

drm/i915/cnl: apply Display WA #1178 to fix type C dongles

Display WA #1178 is meant to fix Aux channel voltage swing too low with
some type C dongles. Although it is for type C, HW engineers reported
that it can be applied to all external ports even if they are not going
to type C.

For CNL we apply the workaround every time Aux B, C and D are powering
up since they will lose the configuration when powered down.

v2: Use common tag for WA

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Arthur J Runyan <arthur.j.runyan@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171128220553.22435-1-lucas.demarchi@intel.com

drm/i915: Use the engine name directly in the error_state file

Instead of using local string names that we will have to keep
maintaining, use the engine->name directly.

v2: Better invalid engine_id handling, capture_bo will not be able know
the engine_id and end up with -1 (Michal).

Suggested-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180110012151.28261-1-michel.thierry@intel.com
[ickle: minor massaging of function names]
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180118175228.2830-1-chris@chris-wilson.co.uk

drm/i915/guc: Change values for i915_guc_log_control

Today we have format mismatch between read/write operations
of i915_guc_log_control entry. For read we return (0, 1..4)
that represents disable/verbosity levels, but for write we
force user to follow internal structure format (0,1,9,11,13).
Let's hide internals from the user and accept same values
as we support for read and related guc_log_level modparam.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180111152441.21676-2-michal.wajdeczko@intel.com
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915/guc: Redefine guc_log_level modparam values

We used value -1 to indicate "disabled" and values 0..3 to
indicate "enabled", but most of our other modparams are using
-1 for "auto" mode and 0 for "disable". For consistency let's
change our log level values to:

-1: auto (depends on platform and Kconfig.debug settings)
 0: disabled
 1: enabled (severity level 0 = min)
 2: enabled (severity level 1)
 3: enabled (severity level 2)
 4: enabled (severity level 3 = max)

v2: fix commit message (Sagar)
    display sanitized modparam value (Sagar)
    unify sanitize messages (Sagar/Michal)

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180111152441.21676-1-michal.wajdeczko@intel.com
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Avoid waitboosting on the active request

Watching a light workload on Baytrail (running glxgears and a 1080p
decode), instead of the system remaining at low frequency, the glxgears
would regularly trigger waitboosting after which it would have to spend
a few seconds throttling back down. In this case, the waitboosting is
counter productive as the minimal wait for glxgears doesn't prevent it
from functioning correctly and delivering frames on time. In this case,
glxgears happens to almost always be waiting on the current request,
which we already expect to complete quickly (see i915_spin_request) and
so avoiding the waitboost on the active request and spinning instead
provides the best latency without overcommitting to upclocking.
However, if the system falls behind we still force the waitboost.
Similarly, we will also trigger upclocking if we detect the system is
not delivering frames on time - again using a mechanism that tries to
detect a miss and not preemptively upclock.

v2: Also skip boosting for after missed vblank if the desired request is
already active.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180118131609.16574-1-chris@chris-wilson.co.uk

drm/i915: Add tracking for CDCLK bypass frequency

The CDCLK bypass frequency can vary on upcoming platforms, so prepare
for that now by tracking its value in the CDCLK state.

Currently on BDW+ the bypass frequency is always the reference clock and
I didn't bother with earlier platforms since it's not all that clear
what's the bypass clock on those.

I also didn't bother adding support for changing this frequency, since
atm I don't see any need for it.

Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180117172508.15993-1-imre.deak@intel.com

drm/i915: Only attempt to scan the requested number of shrinker slabs

Since commit 4e773c3a8a69 ("drm/i915: Wire up shrinkctl->nr_scanned"),
we track the number of objects we scan and do not wish to exceed that as
it will overly penalise our own slabs under mempressure. Given that we
now know the target number of objects to scan, use that as our guide for
deciding to shrink as opposed to the number of objects we manage to
shrink (which doesn't correspond to the numbers we report to shrinkctl).

Fixes: 4e773c3a8a69 ("drm/i915: Wire up shrinkctl->nr_scanned")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180115212455.24046-2-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

Merge tag 'drm-amdkfd-next-fixes-2018-01-15' of git://people.freedesktop.org/~gabbayo/linux into drm-next

- fix NULL pointer dereference
- fix compiler warning on large define values
- remove unnecessary call to execute_queues_cpsch

* tag 'drm-amdkfd-next-fixes-2018-01-15' of git://people.freedesktop.org/~gabbayo/linux:
  drm/amdkfd: Fix potential NULL pointer dereferences
  drm/amdkfd: add ull suffix to 64bit defines
  drm/amdkfd: don't always call execute_queues_cpsch()
  drm/amdkfd: Fix return value 0 when execute_queues_cpsch fails

BackMerge tag 'v4.15-rc8' into drm-next

Linux 4.15-rc8

Daniel requested this for so the intel CI won't fall over on drm-next
so often.

drm: i915: remove timeval users

struct timeval is deprecated because it cannot represent times
past 2038. In this driver, the only use of this structure is
to capture debug information. This is easily changed to ktime_t,
which we then format as needed when printing it later.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180117154916.219273-1-arnd@arndb.de
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915/selftests: Wait for the dma-fence timeout

When testing that the timeout fired, we need to be sure we have waited
just long enough for the timeout to have occurred and for the softirq
(on another cpu) to have completed. Sleeping for an arbitrary amount is
prone to error, so wait for the timeout instead and complain if it was
too late.

v2: Use wait_event_timeout to provide an upper bound
v3: Fix inverted check for wait_event_timeout timing out
v4: Restore the check that the fences aren't signalled too early, by
inspecting them before the expected timeout.

References: https://bugs.freedesktop.org/show_bug.cgi?id=104670
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180117135713.2324-1-chris@chris-wilson.co.uk

drm/i915: Do not WARN_ON with small framebuffers.

It's perfectly legal to create a fb with stride < 512, and one of
the kms_plane_scaling subtests creates a very small fb.

Downgrade the WARN_ON to a simple check check, and because this
function is potentially called on every atomic update/pageflip,
downgrade the other WARN_ON to a WARN_ON_ONCE, and do the right
thing here.

Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180116155331.75175-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm: Fix PANEL_ORIENTATION_QUIRKS breaking the Kconfig DRM menuconfig

All Kconfig menu menu entries should have a depends on MENU_OPTION, the
menu stops after the first Kconfig entry without this depends on.

Since the PANEL_ORIENTATION_QUIRKS option is also used outside of DRM,
it deliberately does not have a depends on DRM, but this causes all
items after it to show as separate items rather then under the DRM
menuconfig.

This commit moves PANEL_ORIENTATION_QUIRKS to the end of the drm Kconfig
file, grouping it with DRM_LIB_RANDOM which also does not depend on DRM,
fixing the DRM menuconfig.

Fixes: 404d1a3edc38 ("drm: Add panel orientation quirks, v6.")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180117081032.6411-1-hdegoede@redhat.com

drm/radeon: fill in rb backend map on evergreen/ni.

This looks to have never gotten filled in, and it seems to
 trigger a bug in mesa.

Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reported-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx9: fix ngg enablement to clear gds reserved memory (v2)

v2: fix register access

Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Ken Wang <ken.wang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/ttm: only free pages rather than update global memory count together

if ttm_get_pages or ttm_mem_global_alloc_page fail, should not update
global memory count.

Signed-off-by: Roger He <Hongbo.He@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Tested-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix CPU based VM updates

That got accidentially removed.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix typo in amdgpu_vce_validate_bo

Otherwise buffer placement is very restrictive and might fail.

Fixes: "drm/amdgpu: fix VCE buffer placement restrictions v2"

Signed-off-by: Christian König <christian.koenig@amd.com>
Reported-by: Deng, Emily <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amdgpu: fix amdgpu_vm_pasid_fault_credit

As soon as the lock is dropped the VM pointer can be invalid.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/ttm: check the return value of register_shrinker

This fixes the build warning:
"ignoring return value of 'register_shrinker', declared with
attribute warn_unused_result [-Wunused-result]"

Signed-off-by: Roger He <Hongbo.He@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: fix sparse warning: Should it be static?

Impact: make symbol static.

Fix this sparse warning:
  drivers/gpu/drm/radeon/radeon_dp_mst.c:332:38: warning: symbol 'mst_cbs' was not declared. Should it be static?

Signed-off-by: Dmitry Rozhkov <dmitry.rozhkov@linux.intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/i915: Always call to intel_display_set_init_power() in resume_early.

intel_power_domains_init_hw() calls set_init_power, but when using
runtime power management this call is skipped. This prevents hw readout
from taking place.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104172
Link: https://patchwork.freedesktop.org/patch/msgid/20180116155324.75120-1-maarten.lankhorst@linux.intel.com
Fixes: bc87229f323e ("drm/i915/skl: enable PC9/10 power states during suspend-to-idle")
Cc: Nivedita Swaminathan <nivedita.swaminathan@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Patrik Jakobsson <patrik.jakobsson@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: <stable@vger.kernel.org> # v4.5+
Reviewed-by: Imre Deak <imre.deak@intel.com>

drm/i915: Rewrite some comments around RCU-deferred object free

Tvrtko noticed that the comments describing the interaction of RCU and
the deferred worker for freeing drm_i915_gem_object were a little
confusing, so attempt to bring some sense to them.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180115205759.13884-1-chris@chris-wilson.co.uk

drm/i915/selftests: Test i915_sw_fence/dma_fence interop

Check that we can successfully wait upon a dma_fence using the
i915_sw_fence, including the optional timeout mechanism.

v2: Account for the rounding up of the timeout to the next second.
Unfortunately, the minimum delay is then 1 second.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180115204348.8480-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: Use our singlethreaded wq for freeing objects

As freeing the objects require serialisation on struct_mutex, we should
prefer to use our singlethreaded driver wq that is dedicated to work
requiring struct_mutex (hence serialised).The benefit should be less
clutter on the system wq, allowing it to make progress even when the
driver/struct_mutex is heavily contended.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180115122846.15193-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: Lock out execlist tasklet while peeking inside for busy-stats

In order to prevent a race condition where we may end up overaccounting
the active state and leaving the busy-stats believing the GPU is 100%
busy, lock out the tasklet while we reconstruct the busy state. There is
no direct spinlock guard for the execlists->port[], so we need to
utilise tasklet_disable() as a synchronous barrier to prevent it, the
only writer to execlists->port[], from running at the same time as the
enable.

Fixes: 4900727d35bb ("drm/i915/pmu: Reconstruct active state on starting busy-stats")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180115092041.13509-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915/fence: Separate timeout mechanism for awaiting on dma-fences

As the timeout mechanism has grown more and more complicated, using
multiple deferred tasks and more than doubling the size of our struct,
split the two implementations to streamline the simpler no-timeout
callback variant.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180115090643.26696-2-chris@chris-wilson.co.uk

drm/i915: Only defer freeing of fence callback when also using the timer

Without an accompanying timer (for internal fences), we can free the
fence callback immediately as we do not need to employ the RCU barrier
to serialise with the timer. By avoiding the RCU delay, we can avoid the
extra mempressure under heavy inter-engine request utilisation.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180115090643.26696-1-chris@chris-wilson.co.uk

drm/panel: lvds: Handle the optional regulator case properly

The devm_regulator_get_optional function, unlike it was assumed in the
commit a1c55bccf600 ("drm/panel: lvds: Add support for the power-supply
property"), is actually returning an error pointer with -ENODEV instead of
NULL when there's no regulator to find.

Make sure we handle that case properly.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Fixes: a1c55bccf600 ("drm/panel: lvds: Add support for the power-supply property")
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180110155941.16109-1-maxime.ripard@free-electrons.com

drm/sun4i: Fix error code in sun4i_tcon_bind()

We accidentally passed the wrong variable to PTR_ERR().

Fixes: a0c1214e4764 ("drm/sun4i: Add LVDS support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180115081113.wlam5wkmdynisf4r@mwanda

Linux 4.15-rc8

Merge branch 'x86-pti-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fixlet from Thomas Gleixner.

Remove a warning about lack of compiler support for retpoline that most
people can't do anything about, so it just annoys them needlessly.

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/retpoline: Remove compile time warning