git.monstr.eu Git - linux-2.6-microblaze.git/log

net: team: do not use dynamic lockdep key

team interface has used a dynamic lockdep key to avoid false-positive
lockdep deadlock detection. Virtual interfaces such as team usually
have their own lock for protecting private data.
These interfaces can be nested.
team0
  |
team1

Each interface's lock is actually different(team0->lock and team1->lock).
So,
mutex_lock(&team0->lock);
mutex_lock(&team1->lock);
mutex_unlock(&team1->lock);
mutex_unlock(&team0->lock);
The above case is absolutely safe. But lockdep warns about deadlock.
Because the lockdep understands these two locks are same. This is a
false-positive lockdep warning.

So, in order to avoid this problem, the team interfaces started to use
dynamic lockdep key. The false-positive problem was fixed, but it
introduced a new problem.

When the new team virtual interface is created, it registers a dynamic
lockdep key(creates dynamic lockdep key) and uses it. But there is the
limitation of the number of lockdep keys.
So, If so many team interfaces are created, it consumes all lockdep keys.
Then, the lockdep stops to work and warns about it.

In order to fix this problem, team interfaces use the subclass instead
of the dynamic key. So, when a new team interface is created, it doesn't
register(create) a new lockdep, but uses existed subclass key instead.
It is already used by the bonding interface for a similar case.

As the bonding interface does, the subclass variable is the same as
the 'dev->nested_level'. This variable indicates the depth in the stacked
interface graph.

The 'dev->nested_level' is protected by RTNL and RCU.
So, 'mutex_lock_nested()' for 'team->lock' requires RTNL or RCU.
In the current code, 'team->lock' is usually acquired under RTNL, there is
no problem with using 'dev->nested_level'.

The 'team_nl_team_get()' and The 'lb_stats_refresh()' functions acquire
'team->lock' without RTNL.
But these don't iterate their own ports nested so they don't need nested
lock.

Reproducer:
   for i in {0..1000}
   do
           ip link add team$i type team
           ip link add dummy$i master team$i type dummy
           ip link set dummy$i up
           ip link set team$i up
   done

Splat looks like:
   BUG: MAX_LOCKDEP_ENTRIES too low!
   turning off the locking correctness validator.
   Please attach the output of /proc/lock_stat to the bug report
   CPU: 0 PID: 4104 Comm: ip Not tainted 6.5.0-rc7+ #45
   Call Trace:
    <TASK>
   dump_stack_lvl+0x64/0xb0
   add_lock_to_list+0x30d/0x5e0
   check_prev_add+0x73a/0x23a0
   ...
   sock_def_readable+0xfe/0x4f0
   netlink_broadcast+0x76b/0xac0
   nlmsg_notify+0x69/0x1d0
   dev_open+0xed/0x130
   ...

Reported-by: syzbot+9bbbacfbf1e04d5221f7@syzkaller.appspotmail.com
Fixes: 369f61bee0f5 ("team: fix nested locking lockdep warning")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/ipv6: SKB symmetric hash should incorporate transport ports

__skb_get_hash_symmetric() was added to compute a symmetric hash over
the protocol, addresses and transport ports, by commit eb70db875671
("packet: Use symmetric hash for PACKET_FANOUT_HASH."). It uses
flow_keys_dissector_symmetric_keys as the flow_dissector to incorporate
IPv4 addresses, IPv6 addresses and ports. However, it should not specify
the flag as FLOW_DISSECTOR_F_STOP_AT_FLOW_LABEL, which stops further
dissection when an IPv6 flow label is encountered, making transport
ports not being incorporated in such case.

As a consequence, the symmetric hash is based on 5-tuple for IPv4 but
3-tuple for IPv6 when flow label is present. It caused a few problems,
e.g. when nft symhash and openvswitch l4_sym rely on the symmetric hash
to perform load balancing as different L4 flows between two given IPv6
addresses would always get the same symmetric hash, leading to uneven
traffic distribution.

Removing the use of FLOW_DISSECTOR_F_STOP_AT_FLOW_LABEL makes sure the
symmetric hash is based on 5-tuple for both IPv4 and IPv6 consistently.

Fixes: eb70db875671 ("packet: Use symmetric hash for PACKET_FANOUT_HASH.")
Reported-by: Lars Ekman <uablrek@gmail.com>
Closes: https://github.com/antrea-io/antrea/issues/5457
Signed-off-by: Quan Tian <qtian@vmware.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

octeontx2-af: Fix truncation of smq in CN10K NIX AQ enqueue mbox handler

The smq value used in the CN10K NIX AQ instruction enqueue mailbox
handler was truncated to 9-bit value from 10-bit value because of
typecasting the CN10K mbox request structure to the CN9K structure.
Though this hasn't caused any problems when programming the NIX SQ
context to the HW because the context structure is the same size.
However, this causes a problem when accessing the structure parameters.
This patch reads the right smq value for each platform.

Fixes: 30077d210c83 ("octeontx2-af: cn10k: Update NIX/NPA context structure")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

igmp: limit igmpv3_newpack() packet size to IP_MAX_MTU

This is a follow up of commit 915d975b2ffa ("net: deal with integer
overflows in kmalloc_reserve()") based on David Laight feedback.

Back in 2010, I failed to realize malicious users could set dev->mtu
to arbitrary values. This mtu has been since limited to 0x7fffffff but
regardless of how big dev->mtu is, it makes no sense for igmpv3_newpack()
to allocate more than IP_MAX_MTU and risk various skb fields overflows.

Fixes: 57e1ab6eaddc ("igmp: refine skb allocations")
Link: https://lore.kernel.org/netdev/d273628df80f45428e739274ab9ecb72@AcuMS.aculab.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: David Laight <David.Laight@ACULAB.COM>
Cc: Kyle Zeng <zengyhkyle@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Revert "net: macsec: preserve ingress frame ordering"

This reverts commit ab046a5d4be4c90a3952a0eae75617b49c0cb01b.

It was trying to work around an issue at the crypto layer by excluding
ASYNC implementations of gcm(aes), because a bug in the AESNI version
caused reordering when some requests bypassed the cryptd queue while
older requests were still pending on the queue.

This was fixed by commit 38b2f68b4264 ("crypto: aesni - Fix cryptd
reordering problem on gcm"), which pre-dates ab046a5d4be4.

Herbert Xu confirmed that all ASYNC implementations are expected to
maintain the ordering of completions wrt requests, so we can use them
in MACsec.

On my test machine, this restores the performance of a single netperf
instance, from 1.4Gbps to 4.4Gbps.

Link: https://lore.kernel.org/netdev/9328d206c5d9f9239cae27e62e74de40b258471d.1692279161.git.sd@queasysnail.net/T/
Link: https://lore.kernel.org/netdev/1b0cec71-d084-8153-2ba4-72ce71abeb65@byu.edu/
Link: https://lore.kernel.org/netdev/d335ddaa-18dc-f9f0-17ee-9783d3b2ca29@mailbox.tu-dresden.de/
Fixes: ab046a5d4be4 ("net: macsec: preserve ingress frame ordering")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/11c952469d114db6fb29242e1d9545e61f52f512.1693757159.git.sd@queasysnail.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

kcm: Destroy mutex in kcm_exit_net()

kcm_exit_net() should call mutex_destroy() on knet->mutex. This is especially
needed if CONFIG_DEBUG_MUTEXES is enabled.

Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module")
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Link: https://lore.kernel.org/r/20230902170708.1727999-1-syoshida@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: sched: sch_qfq: Fix UAF in qfq_dequeue()

When the plug qdisc is used as a class of the qfq qdisc it could trigger a
UAF. This issue can be reproduced with following commands:

  tc qdisc add dev lo root handle 1: qfq
  tc class add dev lo parent 1: classid 1:1 qfq weight 1 maxpkt 512
  tc qdisc add dev lo parent 1:1 handle 2: plug
  tc filter add dev lo parent 1: basic classid 1:1
  ping -c1 127.0.0.1

and boom:

[  285.353793] BUG: KASAN: slab-use-after-free in qfq_dequeue+0xa7/0x7f0
[  285.354910] Read of size 4 at addr ffff8880bad312a8 by task ping/144
[  285.355903]
[  285.356165] CPU: 1 PID: 144 Comm: ping Not tainted 6.5.0-rc3+ #4
[  285.357112] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
[  285.358376] Call Trace:
[  285.358773]  <IRQ>
[  285.359109]  dump_stack_lvl+0x44/0x60
[  285.359708]  print_address_description.constprop.0+0x2c/0x3c0
[  285.360611]  kasan_report+0x10c/0x120
[  285.361195]  ? qfq_dequeue+0xa7/0x7f0
[  285.361780]  qfq_dequeue+0xa7/0x7f0
[  285.362342]  __qdisc_run+0xf1/0x970
[  285.362903]  net_tx_action+0x28e/0x460
[  285.363502]  __do_softirq+0x11b/0x3de
[  285.364097]  do_softirq.part.0+0x72/0x90
[  285.364721]  </IRQ>
[  285.365072]  <TASK>
[  285.365422]  __local_bh_enable_ip+0x77/0x90
[  285.366079]  __dev_queue_xmit+0x95f/0x1550
[  285.366732]  ? __pfx_csum_and_copy_from_iter+0x10/0x10
[  285.367526]  ? __pfx___dev_queue_xmit+0x10/0x10
[  285.368259]  ? __build_skb_around+0x129/0x190
[  285.368960]  ? ip_generic_getfrag+0x12c/0x170
[  285.369653]  ? __pfx_ip_generic_getfrag+0x10/0x10
[  285.370390]  ? csum_partial+0x8/0x20
[  285.370961]  ? raw_getfrag+0xe5/0x140
[  285.371559]  ip_finish_output2+0x539/0xa40
[  285.372222]  ? __pfx_ip_finish_output2+0x10/0x10
[  285.372954]  ip_output+0x113/0x1e0
[  285.373512]  ? __pfx_ip_output+0x10/0x10
[  285.374130]  ? icmp_out_count+0x49/0x60
[  285.374739]  ? __pfx_ip_finish_output+0x10/0x10
[  285.375457]  ip_push_pending_frames+0xf3/0x100
[  285.376173]  raw_sendmsg+0xef5/0x12d0
[  285.376760]  ? do_syscall_64+0x40/0x90
[  285.377359]  ? __static_call_text_end+0x136578/0x136578
[  285.378173]  ? do_syscall_64+0x40/0x90
[  285.378772]  ? kasan_enable_current+0x11/0x20
[  285.379469]  ? __pfx_raw_sendmsg+0x10/0x10
[  285.380137]  ? __sock_create+0x13e/0x270
[  285.380673]  ? __sys_socket+0xf3/0x180
[  285.381174]  ? __x64_sys_socket+0x3d/0x50
[  285.381725]  ? entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[  285.382425]  ? __rcu_read_unlock+0x48/0x70
[  285.382975]  ? ip4_datagram_release_cb+0xd8/0x380
[  285.383608]  ? __pfx_ip4_datagram_release_cb+0x10/0x10
[  285.384295]  ? preempt_count_sub+0x14/0xc0
[  285.384844]  ? __list_del_entry_valid+0x76/0x140
[  285.385467]  ? _raw_spin_lock_bh+0x87/0xe0
[  285.386014]  ? __pfx__raw_spin_lock_bh+0x10/0x10
[  285.386645]  ? release_sock+0xa0/0xd0
[  285.387148]  ? preempt_count_sub+0x14/0xc0
[  285.387712]  ? freeze_secondary_cpus+0x348/0x3c0
[  285.388341]  ? aa_sk_perm+0x177/0x390
[  285.388856]  ? __pfx_aa_sk_perm+0x10/0x10
[  285.389441]  ? check_stack_object+0x22/0x70
[  285.390032]  ? inet_send_prepare+0x2f/0x120
[  285.390603]  ? __pfx_inet_sendmsg+0x10/0x10
[  285.391172]  sock_sendmsg+0xcc/0xe0
[  285.391667]  __sys_sendto+0x190/0x230
[  285.392168]  ? __pfx___sys_sendto+0x10/0x10
[  285.392727]  ? kvm_clock_get_cycles+0x14/0x30
[  285.393328]  ? set_normalized_timespec64+0x57/0x70
[  285.393980]  ? _raw_spin_unlock_irq+0x1b/0x40
[  285.394578]  ? __x64_sys_clock_gettime+0x11c/0x160
[  285.395225]  ? __pfx___x64_sys_clock_gettime+0x10/0x10
[  285.395908]  ? _copy_to_user+0x3e/0x60
[  285.396432]  ? exit_to_user_mode_prepare+0x1a/0x120
[  285.397086]  ? syscall_exit_to_user_mode+0x22/0x50
[  285.397734]  ? do_syscall_64+0x71/0x90
[  285.398258]  __x64_sys_sendto+0x74/0x90
[  285.398786]  do_syscall_64+0x64/0x90
[  285.399273]  ? exit_to_user_mode_prepare+0x1a/0x120
[  285.399949]  ? syscall_exit_to_user_mode+0x22/0x50
[  285.400605]  ? do_syscall_64+0x71/0x90
[  285.401124]  entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[  285.401807] RIP: 0033:0x495726
[  285.402233] Code: ff ff ff f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 11 b8 2c 00 00 00 0f 09
[  285.404683] RSP: 002b:00007ffcc25fb618 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
[  285.405677] RAX: ffffffffffffffda RBX: 0000000000000040 RCX: 0000000000495726
[  285.406628] RDX: 0000000000000040 RSI: 0000000002518750 RDI: 0000000000000000
[  285.407565] RBP: 00000000005205ef R08: 00000000005f8838 R09: 000000000000001c
[  285.408523] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000002517634
[  285.409460] R13: 00007ffcc25fb6f0 R14: 0000000000000003 R15: 0000000000000000
[  285.410403]  </TASK>
[  285.410704]
[  285.410929] Allocated by task 144:
[  285.411402]  kasan_save_stack+0x1e/0x40
[  285.411926]  kasan_set_track+0x21/0x30
[  285.412442]  __kasan_slab_alloc+0x55/0x70
[  285.412973]  kmem_cache_alloc_node+0x187/0x3d0
[  285.413567]  __alloc_skb+0x1b4/0x230
[  285.414060]  __ip_append_data+0x17f7/0x1b60
[  285.414633]  ip_append_data+0x97/0xf0
[  285.415144]  raw_sendmsg+0x5a8/0x12d0
[  285.415640]  sock_sendmsg+0xcc/0xe0
[  285.416117]  __sys_sendto+0x190/0x230
[  285.416626]  __x64_sys_sendto+0x74/0x90
[  285.417145]  do_syscall_64+0x64/0x90
[  285.417624]  entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[  285.418306]
[  285.418531] Freed by task 144:
[  285.418960]  kasan_save_stack+0x1e/0x40
[  285.419469]  kasan_set_track+0x21/0x30
[  285.419988]  kasan_save_free_info+0x27/0x40
[  285.420556]  ____kasan_slab_free+0x109/0x1a0
[  285.421146]  kmem_cache_free+0x1c2/0x450
[  285.421680]  __netif_receive_skb_core+0x2ce/0x1870
[  285.422333]  __netif_receive_skb_one_core+0x97/0x140
[  285.423003]  process_backlog+0x100/0x2f0
[  285.423537]  __napi_poll+0x5c/0x2d0
[  285.424023]  net_rx_action+0x2be/0x560
[  285.424510]  __do_softirq+0x11b/0x3de
[  285.425034]
[  285.425254] The buggy address belongs to the object at ffff8880bad31280
[  285.425254]  which belongs to the cache skbuff_head_cache of size 224
[  285.426993] The buggy address is located 40 bytes inside of
[  285.426993]  freed 224-byte region [ffff8880bad31280, ffff8880bad31360)
[  285.428572]
[  285.428798] The buggy address belongs to the physical page:
[  285.429540] page:00000000f4b77674 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xbad31
[  285.430758] flags: 0x100000000000200(slab|node=0|zone=1)
[  285.431447] page_type: 0xffffffff()
[  285.431934] raw: 0100000000000200 ffff88810094a8c0 dead000000000122 0000000000000000
[  285.432757] raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000
[  285.433562] page dumped because: kasan: bad access detected
[  285.434144]
[  285.434320] Memory state around the buggy address:
[  285.434828]  ffff8880bad31180: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  285.435580]  ffff8880bad31200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  285.436264] >ffff8880bad31280: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  285.436777]                                   ^
[  285.437106]  ffff8880bad31300: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
[  285.437616]  ffff8880bad31380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  285.438126] ==================================================================
[  285.438662] Disabling lock debugging due to kernel taint

Fix this by:
1. Changing sch_plug's .peek handler to qdisc_peek_dequeued(), a
function compatible with non-work-conserving qdiscs
2. Checking the return value of qdisc_dequeue_peeked() in sch_qfq.

Fixes: 462dbc9101ac ("pkt_sched: QFQ Plus: fair-queueing service at DRR cost")
Reported-by: valis <sec@valis.email>
Signed-off-by: valis <sec@valis.email>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20230901162237.11525-1-jhs@mojatatu.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge branch 'af_unix-data-races'

Kuniyuki Iwashima says:

====================
af_unix: Fix four data-races.

While running syzkaller, KCSAN reported 3 data-races with
systemd-coredump using AF_UNIX sockets.

This series fixes the three and another one inspiered by
one of the reports.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

af_unix: Fix data race around sk->sk_err.

As with sk->sk_shutdown shown in the previous patch, sk->sk_err can be
read locklessly by unix_dgram_sendmsg().

Let's use READ_ONCE() for sk_err as well.

Note that the writer side is marked by commit cc04410af7de ("af_unix:
annotate lockless accesses to sk->sk_err").

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

af_unix: Fix data-races around sk->sk_shutdown.

sk->sk_shutdown is changed under unix_state_lock(sk), but
unix_dgram_sendmsg() calls two functions to read sk_shutdown locklessly.

sock_alloc_send_pskb
`- sock_wait_for_wmem

Let's use READ_ONCE() there.

Note that the writer side was marked by commit e1d09c2c2f57 ("af_unix:
Fix data races around sk->sk_shutdown.").

BUG: KCSAN: data-race in sock_alloc_send_pskb / unix_release_sock

write (marked) to 0xffff8880069af12c of 1 bytes by task 1 on cpu 1:
unix_release_sock+0x75c/0x910 net/unix/af_unix.c:631
unix_release+0x59/0x80 net/unix/af_unix.c:1053
__sock_release+0x7d/0x170 net/socket.c:654
sock_close+0x19/0x30 net/socket.c:1386
__fput+0x2a3/0x680 fs/file_table.c:384
____fput+0x15/0x20 fs/file_table.c:412
task_work_run+0x116/0x1a0 kernel/task_work.c:179
resume_user_mode_work include/linux/resume_user_mode.h:49 [inline]
exit_to_user_mode_loop kernel/entry/common.c:171 [inline]
exit_to_user_mode_prepare+0x174/0x180 kernel/entry/common.c:204
__syscall_exit_to_user_mode_work kernel/entry/common.c:286 [inline]
syscall_exit_to_user_mode+0x1a/0x30 kernel/entry/common.c:297
do_syscall_64+0x4b/0x90 arch/x86/entry/common.c:86
entry_SYSCALL_64_after_hwframe+0x6e/0xd8

read to 0xffff8880069af12c of 1 bytes by task 28650 on cpu 0:
sock_alloc_send_pskb+0xd2/0x620 net/core/sock.c:2767
unix_dgram_sendmsg+0x2f8/0x14f0 net/unix/af_unix.c:1944
unix_seqpacket_sendmsg net/unix/af_unix.c:2308 [inline]
unix_seqpacket_sendmsg+0xba/0x130 net/unix/af_unix.c:2292
sock_sendmsg_nosec net/socket.c:725 [inline]
sock_sendmsg+0x148/0x160 net/socket.c:748
____sys_sendmsg+0x4e4/0x610 net/socket.c:2494
___sys_sendmsg+0xc6/0x140 net/socket.c:2548
__sys_sendmsg+0x94/0x140 net/socket.c:2577
__do_sys_sendmsg net/socket.c:2586 [inline]
__se_sys_sendmsg net/socket.c:2584 [inline]
__x64_sys_sendmsg+0x45/0x50 net/socket.c:2584
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x6e/0xd8

value changed: 0x00 -> 0x03

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 28650 Comm: systemd-coredum Not tainted 6.4.0-11989-g6843306689af #6
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

af_unix: Fix data-race around unix_tot_inflight.

unix_tot_inflight is changed under spin_lock(unix_gc_lock), but
unix_release_sock() reads it locklessly.

Let's use READ_ONCE() for unix_tot_inflight.

Note that the writer side was marked by commit 9d6d7f1cb67c ("af_unix:
annote lockless accesses to unix_tot_inflight & gc_in_progress")

BUG: KCSAN: data-race in unix_inflight / unix_release_sock

write (marked) to 0xffffffff871852b8 of 4 bytes by task 123 on cpu 1:
unix_inflight+0x130/0x180 net/unix/scm.c:64
unix_attach_fds+0x137/0x1b0 net/unix/scm.c:123
unix_scm_to_skb net/unix/af_unix.c:1832 [inline]
unix_dgram_sendmsg+0x46a/0x14f0 net/unix/af_unix.c:1955
sock_sendmsg_nosec net/socket.c:724 [inline]
sock_sendmsg+0x148/0x160 net/socket.c:747
____sys_sendmsg+0x4e4/0x610 net/socket.c:2493
___sys_sendmsg+0xc6/0x140 net/socket.c:2547
__sys_sendmsg+0x94/0x140 net/socket.c:2576
__do_sys_sendmsg net/socket.c:2585 [inline]
__se_sys_sendmsg net/socket.c:2583 [inline]
__x64_sys_sendmsg+0x45/0x50 net/socket.c:2583
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x72/0xdc

read to 0xffffffff871852b8 of 4 bytes by task 4891 on cpu 0:
unix_release_sock+0x608/0x910 net/unix/af_unix.c:671
unix_release+0x59/0x80 net/unix/af_unix.c:1058
__sock_release+0x7d/0x170 net/socket.c:653
sock_close+0x19/0x30 net/socket.c:1385
__fput+0x179/0x5e0 fs/file_table.c:321
____fput+0x15/0x20 fs/file_table.c:349
task_work_run+0x116/0x1a0 kernel/task_work.c:179
resume_user_mode_work include/linux/resume_user_mode.h:49 [inline]
exit_to_user_mode_loop kernel/entry/common.c:171 [inline]
exit_to_user_mode_prepare+0x174/0x180 kernel/entry/common.c:204
__syscall_exit_to_user_mode_work kernel/entry/common.c:286 [inline]
syscall_exit_to_user_mode+0x1a/0x30 kernel/entry/common.c:297
do_syscall_64+0x4b/0x90 arch/x86/entry/common.c:86
entry_SYSCALL_64_after_hwframe+0x72/0xdc

value changed: 0x00000000 -> 0x00000001

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 4891 Comm: systemd-coredum Not tainted 6.4.0-rc5-01219-gfa0e21fa4443 #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014

Fixes: 9305cfa4443d ("[AF_UNIX]: Make unix_tot_inflight counter non-atomic")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

af_unix: Fix data-races around user->unix_inflight.

user->unix_inflight is changed under spin_lock(unix_gc_lock),
but too_many_unix_fds() reads it locklessly.

Let's annotate the write/read accesses to user->unix_inflight.

BUG: KCSAN: data-race in unix_attach_fds / unix_inflight

write to 0xffffffff8546f2d0 of 8 bytes by task 44798 on cpu 1:
unix_inflight+0x157/0x180 net/unix/scm.c:66
unix_attach_fds+0x147/0x1e0 net/unix/scm.c:123
unix_scm_to_skb net/unix/af_unix.c:1827 [inline]
unix_dgram_sendmsg+0x46a/0x14f0 net/unix/af_unix.c:1950
unix_seqpacket_sendmsg net/unix/af_unix.c:2308 [inline]
unix_seqpacket_sendmsg+0xba/0x130 net/unix/af_unix.c:2292
sock_sendmsg_nosec net/socket.c:725 [inline]
sock_sendmsg+0x148/0x160 net/socket.c:748
____sys_sendmsg+0x4e4/0x610 net/socket.c:2494
___sys_sendmsg+0xc6/0x140 net/socket.c:2548
__sys_sendmsg+0x94/0x140 net/socket.c:2577
__do_sys_sendmsg net/socket.c:2586 [inline]
__se_sys_sendmsg net/socket.c:2584 [inline]
__x64_sys_sendmsg+0x45/0x50 net/socket.c:2584
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x6e/0xd8

read to 0xffffffff8546f2d0 of 8 bytes by task 44814 on cpu 0:
too_many_unix_fds net/unix/scm.c:101 [inline]
unix_attach_fds+0x54/0x1e0 net/unix/scm.c:110
unix_scm_to_skb net/unix/af_unix.c:1827 [inline]
unix_dgram_sendmsg+0x46a/0x14f0 net/unix/af_unix.c:1950
unix_seqpacket_sendmsg net/unix/af_unix.c:2308 [inline]
unix_seqpacket_sendmsg+0xba/0x130 net/unix/af_unix.c:2292
sock_sendmsg_nosec net/socket.c:725 [inline]
sock_sendmsg+0x148/0x160 net/socket.c:748
____sys_sendmsg+0x4e4/0x610 net/socket.c:2494
___sys_sendmsg+0xc6/0x140 net/socket.c:2548
__sys_sendmsg+0x94/0x140 net/socket.c:2577
__do_sys_sendmsg net/socket.c:2586 [inline]
__se_sys_sendmsg net/socket.c:2584 [inline]
__x64_sys_sendmsg+0x45/0x50 net/socket.c:2584
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x6e/0xd8

value changed: 0x000000000000000c -> 0x000000000000000d

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 44814 Comm: systemd-coredum Not tainted 6.4.0-11989-g6843306689af #6
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014

Fixes: 712f4aad406b ("unix: properly account for FDs passed over unix sockets")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Willy Tarreau <w@1wt.eu>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

af_unix: Fix msg_controllen test in scm_pidfd_recv() for MSG_CMSG_COMPAT.

Heiko Carstens reported that SCM_PIDFD does not work with MSG_CMSG_COMPAT
because scm_pidfd_recv() always checks msg_controllen against sizeof(struct
cmsghdr).

We need to use sizeof(struct compat_cmsghdr) for the compat case.

Fixes: 5e2ff6704a27 ("scm: add SO_PASSPIDFD and SCM_PIDFD")
Reported-by: Heiko Carstens <hca@linux.ibm.com>
Closes: https://lore.kernel.org/netdev/20230901200517.8742-A-hca@linux.ibm.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Tested-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

docs: netdev: update the netdev infra URLs

Some corporate proxies block our current NIPA URLs because
they use a free / shady DNS domain. As suggested by Jesse
we got a new DNS entry from Konstantin - netdev.bots.linux.dev,
use it.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

docs: netdev: document patchwork patch states

The patchwork states are largely self-explanatory but small
ambiguities may still come up. Document how we interpret
the states in networking.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: phy: micrel: Correct bit assignments for phy_device flags

Previously, the defines for phy_device flags in the Micrel driver were
ambiguous in their representation. They were intended to be bit masks
but were mistakenly defined as bit positions. This led to the following
issues:

- MICREL_KSZ8_P1_ERRATA, designated for KSZ88xx switches, overlapped
  with MICREL_PHY_FXEN and MICREL_PHY_50MHZ_CLK.
- Due to this overlap, the code path for MICREL_PHY_FXEN, tailored for
  the KSZ8041 PHY, was not executed for KSZ88xx PHYs.
- Similarly, the code associated with MICREL_PHY_50MHZ_CLK wasn't
  triggered for KSZ88xx.

To rectify this, all three flags have now been explicitly converted to
use the `BIT()` macro, ensuring they are defined as bit masks and
preventing potential overlaps in the future.

Fixes: 49011e0c1555 ("net: phy: micrel: ksz886x/ksz8081: add cabletest support")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ipv6/addrconf: avoid integer underflow in ipv6_create_tempaddr

The existing code incorrectly casted a negative value (the result of a
subtraction) to an unsigned value without checking. For example, if
/proc/sys/net/ipv6/conf/*/temp_prefered_lft was set to 1, the preferred
lifetime would jump to 4 billion seconds. On my machine and network the
shortest lifetime that avoided underflow was 3 seconds.

Fixes: 76506a986dc3 ("IPv6: fix DESYNC_FACTOR")
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

veth: Fixing transmit return status for dropped packets

The veth_xmit function returns NETDEV_TX_OK even when packets are dropped.
This behavior leads to incorrect calculations of statistics counts, as
well as things like txq->trans_start updates.

Fixes: e314dbdc1c0d ("[NET]: Virtual ethernet device driver.")
Signed-off-by: Liang Chen <liangchen.linux@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

gve: fix frag_list chaining

gve_rx_append_frags() is able to build skbs chained with frag_list,
like GRO engine.

Problem is that shinfo->frag_list should only be used
for the head of the chain.

All other links should use skb->next pointer.

Otherwise, built skbs are not valid and can cause crashes.

Equivalent code in GRO (skb_gro_receive()) is:

    if (NAPI_GRO_CB(p)->last == p)
        skb_shinfo(p)->frag_list = skb;
    else
        NAPI_GRO_CB(p)->last->next = skb;
    NAPI_GRO_CB(p)->last = skb;

Fixes: 9b8dd5e5ea48 ("gve: DQO: Add RX path")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Bailey Forrest <bcf@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Catherine Sullivan <csully@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: deal with integer overflows in kmalloc_reserve()

Blamed commit changed:
    ptr = kmalloc(size);
    if (ptr)
      size = ksize(ptr);

to:
    size = kmalloc_size_roundup(size);
    ptr = kmalloc(size);

This allowed various crash as reported by syzbot [1]
and Kyle Zeng.

Problem is that if @size is bigger than 0x80000001,
kmalloc_size_roundup(size) returns 2^32.

kmalloc_reserve() uses a 32bit variable (obj_size),
so 2^32 is truncated to 0.

kmalloc(0) returns ZERO_SIZE_PTR which is not handled by
skb allocations.

Following trace can be triggered if a netdev->mtu is set
close to 0x7fffffff

We might in the future limit netdev->mtu to more sensible
limit (like KMALLOC_MAX_SIZE).

This patch is based on a syzbot report, and also a report
and tentative fix from Kyle Zeng.

[1]
BUG: KASAN: user-memory-access in __build_skb_around net/core/skbuff.c:294 [inline]
BUG: KASAN: user-memory-access in __alloc_skb+0x3c4/0x6e8 net/core/skbuff.c:527
Write of size 32 at addr 00000000fffffd10 by task syz-executor.4/22554

CPU: 1 PID: 22554 Comm: syz-executor.4 Not tainted 6.1.39-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/03/2023
Call trace:
dump_backtrace+0x1c8/0x1f4 arch/arm64/kernel/stacktrace.c:279
show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:286
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x120/0x1a0 lib/dump_stack.c:106
print_report+0xe4/0x4b4 mm/kasan/report.c:398
kasan_report+0x150/0x1ac mm/kasan/report.c:495
kasan_check_range+0x264/0x2a4 mm/kasan/generic.c:189
memset+0x40/0x70 mm/kasan/shadow.c:44
__build_skb_around net/core/skbuff.c:294 [inline]
__alloc_skb+0x3c4/0x6e8 net/core/skbuff.c:527
alloc_skb include/linux/skbuff.h:1316 [inline]
igmpv3_newpack+0x104/0x1088 net/ipv4/igmp.c:359
add_grec+0x81c/0x1124 net/ipv4/igmp.c:534
igmpv3_send_cr net/ipv4/igmp.c:667 [inline]
igmp_ifc_timer_expire+0x1b0/0x1008 net/ipv4/igmp.c:810
call_timer_fn+0x1c0/0x9f0 kernel/time/timer.c:1474
expire_timers kernel/time/timer.c:1519 [inline]
__run_timers+0x54c/0x710 kernel/time/timer.c:1790
run_timer_softirq+0x28/0x4c kernel/time/timer.c:1803
_stext+0x380/0xfbc
____do_softirq+0x14/0x20 arch/arm64/kernel/irq.c:79
call_on_irq_stack+0x24/0x4c arch/arm64/kernel/entry.S:891
do_softirq_own_stack+0x20/0x2c arch/arm64/kernel/irq.c:84
invoke_softirq kernel/softirq.c:437 [inline]
__irq_exit_rcu+0x1c0/0x4cc kernel/softirq.c:683
irq_exit_rcu+0x14/0x78 kernel/softirq.c:695
el0_interrupt+0x7c/0x2e0 arch/arm64/kernel/entry-common.c:717
__el0_irq_handler_common+0x18/0x24 arch/arm64/kernel/entry-common.c:724
el0t_64_irq_handler+0x10/0x1c arch/arm64/kernel/entry-common.c:729
el0t_64_irq+0x1a0/0x1a4 arch/arm64/kernel/entry.S:584

Fixes: 12d6c1d3a2ad ("skbuff: Proactively round up to kmalloc bucket size")
Reported-by: syzbot <syzkaller@googlegroups.com>
Reported-by: Kyle Zeng <zengyhkyle@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

igb: disable virtualization features on 82580

Disable virtualization features on 82580 just as on i210/i211.
This avoids that virt functions are acidentally called on 82850.

Fixes: 55cac248caa4 ("igb: Add full support for 82580 devices")
Signed-off-by: Corinna Vinschen <vinschen@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

sfc: check for zero length in EF10 RX prefix

When EF10 RXDP firmware is operating in cut-through mode, packet length
is not known at the time the RX prefix is generated, so it is left as
zero and RX event merging is inhibited to ensure that the length is
available in the RX event. However, it has been found that in certain
circumstances the RX events for these packets still get merged,
meaning the driver cannot read the length from the RX event, and tries
to use the length from the prefix.
The resulting zero-length SKBs cause crashes in GRO since commit
1d11fa696733 ("net-gro: remove GRO_DROP"), so add a check to the driver
to detect these zero-length RX events and discard the packet.

Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'dst-hint-multipath'

Sriram Yagnaraman says:

====================
Avoid TCP resets when using ECMP for load-balancing between multiple servers.

All packets in the same flow (L3/L4 depending on multipath hash policy)
should be directed to the same target, but after [0]/[1] we see stray
packets directed towards other targets. This, for instance, causes RST
to be sent on TCP connections.

The first two patches solve the problem by ignoring route hints for
destinations that are part of multipath group, by using new SKB flags
for IPv4 and IPv6. The third patch is a selftest that tests the
scenario.

Thanks to Ido, for reviewing and suggesting a way forward in [2] and
also suggesting how to write a selftest for this.

v4->v5:
- Fixed review comments from Ido
v3->v4:
- Remove single path test
- Rebase to latest
v2->v3:
- Add NULL check for skb in fib6_select_path (Ido Schimmel)
- Use fib_tests.sh for selftest instead of the forwarding suite (Ido
Schimmel)
v1->v2:
- Update to commit messages describing the solution (Ido Schimmel)
- Use perf stat to count fib table lookups in selftest (Ido Schimmel)
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: fib_tests: Add multipath list receive tests

The test uses perf stat to count the number of fib:fib_table_lookup
tracepoint hits for IPv4 and the number of fib6:fib6_table_lookup for
IPv6. The measured count is checked to be within 5% of the total number
of packets sent via veth1.

Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: ignore dst hint for multipath routes

Route hints when the nexthop is part of a multipath group causes packets
in the same receive batch to be sent to the same nexthop irrespective of
the multipath hash of the packet. So, do not extract route hint for
packets whose destination is part of a multipath group.

A new SKB flag IP6SKB_MULTIPATH is introduced for this purpose, set the
flag when route is looked up in fib6_select_path() and use it in
ip6_can_use_hint() to check for the existence of the flag.

Fixes: 197dbf24e360 ("ipv6: introduce and uses route look hints for list input.")
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv4: ignore dst hint for multipath routes

Route hints when the nexthop is part of a multipath group causes packets
in the same receive batch to be sent to the same nexthop irrespective of
the multipath hash of the packet. So, do not extract route hint for
packets whose destination is part of a multipath group.

A new SKB flag IPSKB_MULTIPATH is introduced for this purpose, set the
flag when route is looked up in ip_mkroute_input() and use it in
ip_extract_route_hint() to check for the existence of the flag.

Fixes: 02b24941619f ("ipv4: use dst hint for ipv4 list receive")
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

skbuff: skb_segment, Call zero copy functions before using skbuff frags

Commit bf5c25d60861 ("skbuff: in skb_segment, call zerocopy functions
once per nskb") added the call to zero copy functions in skb_segment().
The change introduced a bug in skb_segment() because skb_orphan_frags()
may possibly change the number of fragments or allocate new fragments
altogether leaving nrfrags and frag to point to the old values. This can
cause a panic with stacktrace like the one below.

[  193.894380] BUG: kernel NULL pointer dereference, address: 00000000000000bc
[  193.895273] CPU: 13 PID: 18164 Comm: vh-net-17428 Kdump: loaded Tainted: G           O      5.15.123+ #26
[  193.903919] RIP: 0010:skb_segment+0xb0e/0x12f0
[  194.021892] Call Trace:
[  194.027422]  <TASK>
[  194.072861]  tcp_gso_segment+0x107/0x540
[  194.082031]  inet_gso_segment+0x15c/0x3d0
[  194.090783]  skb_mac_gso_segment+0x9f/0x110
[  194.095016]  __skb_gso_segment+0xc1/0x190
[  194.103131]  netem_enqueue+0x290/0xb10 [sch_netem]
[  194.107071]  dev_qdisc_enqueue+0x16/0x70
[  194.110884]  __dev_queue_xmit+0x63b/0xb30
[  194.121670]  bond_start_xmit+0x159/0x380 [bonding]
[  194.128506]  dev_hard_start_xmit+0xc3/0x1e0
[  194.131787]  __dev_queue_xmit+0x8a0/0xb30
[  194.138225]  macvlan_start_xmit+0x4f/0x100 [macvlan]
[  194.141477]  dev_hard_start_xmit+0xc3/0x1e0
[  194.144622]  sch_direct_xmit+0xe3/0x280
[  194.147748]  __dev_queue_xmit+0x54a/0xb30
[  194.154131]  tap_get_user+0x2a8/0x9c0 [tap]
[  194.157358]  tap_sendmsg+0x52/0x8e0 [tap]
[  194.167049]  handle_tx_zerocopy+0x14e/0x4c0 [vhost_net]
[  194.173631]  handle_tx+0xcd/0xe0 [vhost_net]
[  194.176959]  vhost_worker+0x76/0xb0 [vhost]
[  194.183667]  kthread+0x118/0x140
[  194.190358]  ret_from_fork+0x1f/0x30
[  194.193670]  </TASK>

In this case calling skb_orphan_frags() updated nr_frags leaving nrfrags
local variable in skb_segment() stale. This resulted in the code hitting
i >= nrfrags prematurely and trying to move to next frag_skb using
list_skb pointer, which was NULL, and caused kernel panic. Move the call
to zero copy functions before using frags and nr_frags.

Fixes: bf5c25d60861 ("skbuff: in skb_segment, call zerocopy functions once per nskb")
Signed-off-by: Mohamed Khalfella <mkhalfella@purestorage.com>
Reported-by: Amit Goyal <agoyal@purestorage.com>
Cc: stable@vger.kernel.org
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'net-data-race-annotations'

Eric Dumazet says:

====================
net: another round of data-race annotations

Series inspired by some syzbot reports, taking care
of 4 socket fields that can be read locklessly.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: annotate data-races around sk->sk_bind_phc

sk->sk_bind_phc is read locklessly. Add corresponding annotations.

Fixes: d463126e23f1 ("net: sock: extend SO_TIMESTAMPING for PHC binding")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: annotate data-races around sk->sk_tsflags

sk->sk_tsflags can be read locklessly, add corresponding annotations.

Fixes: b9f40e21ef42 ("net-timestamp: move timestamp flags out of sk_flags")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mptcp: annotate data-races around msk->rmem_fwd_alloc

msk->rmem_fwd_alloc can be read locklessly.

Add mptcp_rmem_fwd_alloc_add(), similar to sk_forward_alloc_add(),
and appropriate READ_ONCE()/WRITE_ONCE() annotations.

Fixes: 6511882cdd82 ("mptcp: allocate fwd memory separately on the rx and tx path")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: annotate data-races around sk->sk_forward_alloc

Every time sk->sk_forward_alloc is read locklessly,
add a READ_ONCE().

Add sk_forward_alloc_add() helper to centralize updates,
to reduce number of WRITE_ONCE().

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: use sk_forward_alloc_get() in sk_get_meminfo()

inet_sk_diag_fill() has been changed to use sk_forward_alloc_get(),
but sk_get_meminfo() was forgotten.

Fixes: 292e6077b040 ("net: introduce sk_forward_alloc_get()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/handshake: fix null-ptr-deref in handshake_nl_done_doit()

We should not call trace_handshake_cmd_done_err() if socket lookup has failed.

Also we should call trace_handshake_cmd_done_err() before releasing the file,
otherwise dereferencing sock->sk can return garbage.

This also reverts 7afc6d0a107f ("net/handshake: Fix uninitialized local variable")

Unable to handle kernel paging request at virtual address dfff800000000003
KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f]
Mem abort info:
ESR = 0x0000000096000005
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x05: level 1 translation fault
Data abort info:
ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[dfff800000000003] address between user and kernel address ranges
Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
Modules linked in:
CPU: 1 PID: 5986 Comm: syz-executor292 Not tainted 6.5.0-rc7-syzkaller-gfe4469582053 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023
pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : handshake_nl_done_doit+0x198/0x9c8 net/handshake/netlink.c:193
lr : handshake_nl_done_doit+0x180/0x9c8
sp : ffff800096e37180
x29: ffff800096e37200 x28: 1ffff00012dc6e34 x27: dfff800000000000
x26: ffff800096e373d0 x25: 0000000000000000 x24: 00000000ffffffa8
x23: ffff800096e373f0 x22: 1ffff00012dc6e38 x21: 0000000000000000
x20: ffff800096e371c0 x19: 0000000000000018 x18: 0000000000000000
x17: 0000000000000000 x16: ffff800080516cc4 x15: 0000000000000001
x14: 1fffe0001b14aa3b x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000003
x8 : 0000000000000003 x7 : ffff800080afe47c x6 : 0000000000000000
x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffff800080a88078
x2 : 0000000000000001 x1 : 00000000ffffffa8 x0 : 0000000000000000
Call trace:
handshake_nl_done_doit+0x198/0x9c8 net/handshake/netlink.c:193
genl_family_rcv_msg_doit net/netlink/genetlink.c:970 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:1050 [inline]
genl_rcv_msg+0x96c/0xc50 net/netlink/genetlink.c:1067
netlink_rcv_skb+0x214/0x3c4 net/netlink/af_netlink.c:2549
genl_rcv+0x38/0x50 net/netlink/genetlink.c:1078
netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline]
netlink_unicast+0x660/0x8d4 net/netlink/af_netlink.c:1365
netlink_sendmsg+0x834/0xb18 net/netlink/af_netlink.c:1914
sock_sendmsg_nosec net/socket.c:725 [inline]
sock_sendmsg net/socket.c:748 [inline]
____sys_sendmsg+0x56c/0x840 net/socket.c:2494
___sys_sendmsg net/socket.c:2548 [inline]
__sys_sendmsg+0x26c/0x33c net/socket.c:2577
__do_sys_sendmsg net/socket.c:2586 [inline]
__se_sys_sendmsg net/socket.c:2584 [inline]
__arm64_sys_sendmsg+0x80/0x94 net/socket.c:2584
__invoke_syscall arch/arm64/kernel/syscall.c:37 [inline]
invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:51
el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:136
do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:155
el0_svc+0x58/0x16c arch/arm64/kernel/entry-common.c:678
el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:696
el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591
Code: 12800108 b90043e8 910062b3 d343fe68 (387b6908)

Fixes: 3b3009ea8abb ("net/handshake: Create a NETLINK service for handling handshake requests")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'for-netdev' of https://git./linux/kernel/git/bpf/bpf

Daniel Borkmann says:

====================
pull-request: bpf 2023-08-31

We've added 15 non-merge commits during the last 3 day(s) which contain
a total of 17 files changed, 468 insertions(+), 97 deletions(-).

The main changes are:

1) BPF selftest fixes: one flake and one related to clang18 testing,
   from Yonghong Song.

2) Fix a d_path BPF selftest failure after fast-forward from Linus'
   tree, from Jiri Olsa.

3) Fix a preempt_rt splat in sockmap when using raw_spin_lock_t,
   from John Fastabend.

4) Fix a xsk_diag_fill use-after-free race during socket cleanup,
   from Magnus Karlsson.

5) Fix xsk_build_skb to address a buggy dereference of an ERR_PTR(),
   from Tirthendu Sarkar.

6) Fix a bpftool build warning when compiled with -Wtype-limits,
   from Yafang Shao.

7) Several misc fixes and cleanups in standardization docs,
   from David Vernet.

8) Fix BPF selftest install to consider no_alu32/cpuv4/bpf-gcc flavors,
   from Björn Töpel.

9) Annotate a data race in bpf_long_memcpy for KCSAN, from Daniel Borkmann.

10) Extend documentation with a description for CO-RE relocations,
    from Eduard Zingerman.

11) Fix several invalid escape sequence warnings in bpf_doc.py script,
    from Vishal Chourasia.

12) Fix the instruction set doc wrt offset of BPF-to-BPF call,
    from Will Hawkins.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  selftests/bpf: Include build flavors for install target
  bpf: Annotate bpf_long_memcpy with data_race
  selftests/bpf: Fix d_path test
  bpf, docs: Fix invalid escape sequence warnings in bpf_doc.py
  xsk: Fix xsk_diag use-after-free error during socket cleanup
  bpf, docs: s/eBPF/BPF in standards documents
  bpf, docs: Add abi.rst document to standardization subdirectory
  bpf, docs: Move linux-notes.rst to root bpf docs tree
  bpf, sockmap: Fix preempt_rt splat when using raw_spin_lock_t
  docs/bpf: Add description for CO-RE relocations
  bpf, docs: Correct source of offset for program-local call
  selftests/bpf: Fix flaky cgroup_iter_sleepable subtest
  xsk: Fix xsk_build_skb() error: 'skb' dereferencing possible ERR_PTR()
  bpftool: Fix build warnings with -Wtype-limits
  bpf: Prevent inlining of bpf_fentry_test7()
====================

Link: https://lore.kernel.org/r/20230831210019.14417-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests/bpf: Include build flavors for install target

When using the "install" or targets depending on install, e.g. "gen_tar",
the BPF machine flavors weren't included.

A command like:
  | make ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- O=/workspace/kbuild \
  |    HOSTCC=gcc FORMAT= SKIP_TARGETS="arm64 ia64 powerpc sparc64 x86 sgx" \
  |    -C tools/testing/selftests gen_tar
would not include bpf/no_alu32, bpf/cpuv4, or bpf/bpf-gcc.

Include the BPF machine flavors for "install" make target.

Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230831162954.111485-1-bjorn@kernel.org

bpf: Annotate bpf_long_memcpy with data_race

syzbot reported a data race splat between two processes trying to
update the same BPF map value via syscall on different CPUs:

  BUG: KCSAN: data-race in bpf_percpu_array_update / bpf_percpu_array_update

  write to 0xffffe8fffe7425d8 of 8 bytes by task 8257 on cpu 1:
   bpf_long_memcpy include/linux/bpf.h:428 [inline]
   bpf_obj_memcpy include/linux/bpf.h:441 [inline]
   copy_map_value_long include/linux/bpf.h:464 [inline]
   bpf_percpu_array_update+0x3bb/0x500 kernel/bpf/arraymap.c:380
   bpf_map_update_value+0x190/0x370 kernel/bpf/syscall.c:175
   generic_map_update_batch+0x3ae/0x4f0 kernel/bpf/syscall.c:1749
   bpf_map_do_batch+0x2df/0x3d0 kernel/bpf/syscall.c:4648
   __sys_bpf+0x28a/0x780
   __do_sys_bpf kernel/bpf/syscall.c:5241 [inline]
   __se_sys_bpf kernel/bpf/syscall.c:5239 [inline]
   __x64_sys_bpf+0x43/0x50 kernel/bpf/syscall.c:5239
   do_syscall_x64 arch/x86/entry/common.c:50 [inline]
   do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
   entry_SYSCALL_64_after_hwframe+0x63/0xcd

  write to 0xffffe8fffe7425d8 of 8 bytes by task 8268 on cpu 0:
   bpf_long_memcpy include/linux/bpf.h:428 [inline]
   bpf_obj_memcpy include/linux/bpf.h:441 [inline]
   copy_map_value_long include/linux/bpf.h:464 [inline]
   bpf_percpu_array_update+0x3bb/0x500 kernel/bpf/arraymap.c:380
   bpf_map_update_value+0x190/0x370 kernel/bpf/syscall.c:175
   generic_map_update_batch+0x3ae/0x4f0 kernel/bpf/syscall.c:1749
   bpf_map_do_batch+0x2df/0x3d0 kernel/bpf/syscall.c:4648
   __sys_bpf+0x28a/0x780
   __do_sys_bpf kernel/bpf/syscall.c:5241 [inline]
   __se_sys_bpf kernel/bpf/syscall.c:5239 [inline]
   __x64_sys_bpf+0x43/0x50 kernel/bpf/syscall.c:5239
   do_syscall_x64 arch/x86/entry/common.c:50 [inline]
   do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
   entry_SYSCALL_64_after_hwframe+0x63/0xcd

  value changed: 0x0000000000000000 -> 0xfffffff000002788

The bpf_long_memcpy is used with 8-byte aligned pointers, power-of-8 size
and forced to use long read/writes to try to atomically copy long counters.
It is best-effort only and no barriers are here since it _will_ race with
concurrent updates from BPF programs. The bpf_long_memcpy() is called from
bpf(2) syscall. Marco suggested that the best way to make this known to
KCSAN would be to use data_race() annotation.

Reported-by: syzbot+97522333291430dd277f@syzkaller.appspotmail.com
Suggested-by: Marco Elver <elver@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Marco Elver <elver@google.com>
Link: https://lore.kernel.org/bpf/000000000000d87a7f06040c970c@google.com
Link: https://lore.kernel.org/bpf/57628f7a15e20d502247c3b55fceb1cb2b31f266.1693342186.git.daniel@iogearbox.net

selftests/bpf: Fix d_path test

Recent commit [1] broke d_path test, because now filp_close is not called
directly from sys_close, but eventually later when the file is finally
released.

As suggested by Hou Tao we don't need to re-hook the bpf program, but just
instead we can use sys_close_range to trigger filp_close synchronously.

[1] 021a160abf62 ("fs: use __fput_sync in close(2)")

Suggested-by: Hou Tao <houtao@huaweicloud.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230831141103.359810-1-jolsa@kernel.org

bpf, docs: Fix invalid escape sequence warnings in bpf_doc.py

The script bpf_doc.py generates multiple SyntaxWarnings related to invalid
escape sequences when executed with Python 3.12. These warnings do not appear
in Python 3.10 and 3.11 and do not affect the kernel build, which completes
successfully.

This patch resolves these SyntaxWarnings by converting the relevant string
literals to raw strings or by escaping backslashes. This ensures that
backslashes are interpreted as literal characters, eliminating the warnings.

Reported-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Vishal Chourasia <vishalc@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20230829074931.2511204-1-vishalc@linux.ibm.com

xsk: Fix xsk_diag use-after-free error during socket cleanup

Fix a use-after-free error that is possible if the xsk_diag interface
is used after the socket has been unbound from the device. This can
happen either due to the socket being closed or the device
disappearing. In the early days of AF_XDP, the way we tested that a
socket was not bound to a device was to simply check if the netdevice
pointer in the xsk socket structure was NULL. Later, a better system
was introduced by having an explicit state variable in the xsk socket
struct. For example, the state of a socket that is on the way to being
closed and has been unbound from the device is XSK_UNBOUND.

The commit in the Fixes tag below deleted the old way of signalling
that a socket is unbound, setting dev to NULL. This in the belief that
all code using the old way had been exterminated. That was
unfortunately not true as the xsk diagnostics code was still using the
old way and thus does not work as intended when a socket is going
down. Fix this by introducing a test against the state variable. If
the socket is in the state XSK_UNBOUND, simply abort the diagnostic's
netlink operation.

Fixes: 18b1ab7aa76b ("xsk: Fix race at socket teardown")
Reported-by: syzbot+822d1359297e2694f873@syzkaller.appspotmail.com
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: syzbot+822d1359297e2694f873@syzkaller.appspotmail.com
Tested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20230831100119.17408-1-magnus.karlsson@gmail.com

net: fib: avoid warn splat in flow dissector

New skbs allocated via nf_send_reset() have skb->dev == NULL.

fib*_rules_early_flow_dissect helpers already have a 'struct net'
argument but its not passed down to the flow dissector core, which
will then WARN as it can't derive a net namespace to use:

WARNING: CPU: 0 PID: 0 at net/core/flow_dissector.c:1016 __skb_flow_dissect+0xa91/0x1cd0
[..]
  ip_route_me_harder+0x143/0x330
  nf_send_reset+0x17c/0x2d0 [nf_reject_ipv4]
  nft_reject_inet_eval+0xa9/0xf2 [nft_reject_inet]
  nft_do_chain+0x198/0x5d0 [nf_tables]
  nft_do_chain_inet+0xa4/0x110 [nf_tables]
  nf_hook_slow+0x41/0xc0
  ip_local_deliver+0xce/0x110
  ..

Cc: Stanislav Fomichev <sdf@google.com>
Cc: David Ahern <dsahern@kernel.org>
Cc: Ido Schimmel <idosch@nvidia.com>
Fixes: 812fa71f0d96 ("netfilter: Dissect flow after packet mangling")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217826
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230830110043.30497-1-fw@strlen.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: read sk->sk_family once in sk_mc_loop()

syzbot is playing with IPV6_ADDRFORM quite a lot these days,
and managed to hit the WARN_ON_ONCE(1) in sk_mc_loop()

We have many more similar issues to fix.

WARNING: CPU: 1 PID: 1593 at net/core/sock.c:782 sk_mc_loop+0x165/0x260
Modules linked in:
CPU: 1 PID: 1593 Comm: kworker/1:3 Not tainted 6.1.40-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023
Workqueue: events_power_efficient gc_worker
RIP: 0010:sk_mc_loop+0x165/0x260 net/core/sock.c:782
Code: 34 1b fd 49 81 c7 18 05 00 00 4c 89 f8 48 c1 e8 03 42 80 3c 20 00 74 08 4c 89 ff e8 25 36 6d fd 4d 8b 37 eb 13 e8 db 33 1b fd <0f> 0b b3 01 eb 34 e8 d0 33 1b fd 45 31 f6 49 83 c6 38 4c 89 f0 48
RSP: 0018:ffffc90000388530 EFLAGS: 00010246
RAX: ffffffff846d9b55 RBX: 0000000000000011 RCX: ffff88814f884980
RDX: 0000000000000102 RSI: ffffffff87ae5160 RDI: 0000000000000011
RBP: ffffc90000388550 R08: 0000000000000003 R09: ffffffff846d9a65
R10: 0000000000000002 R11: ffff88814f884980 R12: dffffc0000000000
R13: ffff88810dbee000 R14: 0000000000000010 R15: ffff888150084000
FS: 0000000000000000(0000) GS:ffff8881f6b00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000180 CR3: 000000014ee5b000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<IRQ>
[<ffffffff8507734f>] ip6_finish_output2+0x33f/0x1ae0 net/ipv6/ip6_output.c:83
[<ffffffff85062766>] __ip6_finish_output net/ipv6/ip6_output.c:200 [inline]
[<ffffffff85062766>] ip6_finish_output+0x6c6/0xb10 net/ipv6/ip6_output.c:211
[<ffffffff85061f8c>] NF_HOOK_COND include/linux/netfilter.h:298 [inline]
[<ffffffff85061f8c>] ip6_output+0x2bc/0x3d0 net/ipv6/ip6_output.c:232
[<ffffffff852071cf>] dst_output include/net/dst.h:444 [inline]
[<ffffffff852071cf>] ip6_local_out+0x10f/0x140 net/ipv6/output_core.c:161
[<ffffffff83618fb4>] ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:483 [inline]
[<ffffffff83618fb4>] ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:529 [inline]
[<ffffffff83618fb4>] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline]
[<ffffffff83618fb4>] ipvlan_queue_xmit+0x1174/0x1be0 drivers/net/ipvlan/ipvlan_core.c:677
[<ffffffff8361ddd9>] ipvlan_start_xmit+0x49/0x100 drivers/net/ipvlan/ipvlan_main.c:229
[<ffffffff84763fc0>] netdev_start_xmit include/linux/netdevice.h:4925 [inline]
[<ffffffff84763fc0>] xmit_one net/core/dev.c:3644 [inline]
[<ffffffff84763fc0>] dev_hard_start_xmit+0x320/0x980 net/core/dev.c:3660
[<ffffffff8494c650>] sch_direct_xmit+0x2a0/0x9c0 net/sched/sch_generic.c:342
[<ffffffff8494d883>] qdisc_restart net/sched/sch_generic.c:407 [inline]
[<ffffffff8494d883>] __qdisc_run+0xb13/0x1e70 net/sched/sch_generic.c:415
[<ffffffff8478c426>] qdisc_run+0xd6/0x260 include/net/pkt_sched.h:125
[<ffffffff84796eac>] net_tx_action+0x7ac/0x940 net/core/dev.c:5247
[<ffffffff858002bd>] __do_softirq+0x2bd/0x9bd kernel/softirq.c:599
[<ffffffff814c3fe8>] invoke_softirq kernel/softirq.c:430 [inline]
[<ffffffff814c3fe8>] __irq_exit_rcu+0xc8/0x170 kernel/softirq.c:683
[<ffffffff814c3f09>] irq_exit_rcu+0x9/0x20 kernel/softirq.c:695

Fixes: 7ad6848c7e81 ("ip: fix mc_loop checks for tunnels with multicast outer addresses")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230830101244.1146934-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

ipv4: annotate data-races around fi->fib_dead

syzbot complained about a data-race in fib_table_lookup() [1]

Add appropriate annotations to document it.

[1]
BUG: KCSAN: data-race in fib_release_info / fib_table_lookup

write to 0xffff888150f31744 of 1 bytes by task 1189 on cpu 0:
fib_release_info+0x3a0/0x460 net/ipv4/fib_semantics.c:281
fib_table_delete+0x8d2/0x900 net/ipv4/fib_trie.c:1777
fib_magic+0x1c1/0x1f0 net/ipv4/fib_frontend.c:1106
fib_del_ifaddr+0x8cf/0xa60 net/ipv4/fib_frontend.c:1317
fib_inetaddr_event+0x77/0x200 net/ipv4/fib_frontend.c:1448
notifier_call_chain kernel/notifier.c:93 [inline]
blocking_notifier_call_chain+0x90/0x200 kernel/notifier.c:388
__inet_del_ifa+0x4df/0x800 net/ipv4/devinet.c:432
inet_del_ifa net/ipv4/devinet.c:469 [inline]
inetdev_destroy net/ipv4/devinet.c:322 [inline]
inetdev_event+0x553/0xaf0 net/ipv4/devinet.c:1606
notifier_call_chain kernel/notifier.c:93 [inline]
raw_notifier_call_chain+0x6b/0x1c0 kernel/notifier.c:461
call_netdevice_notifiers_info net/core/dev.c:1962 [inline]
call_netdevice_notifiers_mtu+0xd2/0x130 net/core/dev.c:2037
dev_set_mtu_ext+0x30b/0x3e0 net/core/dev.c:8673
do_setlink+0x5be/0x2430 net/core/rtnetlink.c:2837
rtnl_setlink+0x255/0x300 net/core/rtnetlink.c:3177
rtnetlink_rcv_msg+0x807/0x8c0 net/core/rtnetlink.c:6445
netlink_rcv_skb+0x126/0x220 net/netlink/af_netlink.c:2549
rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:6463
netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline]
netlink_unicast+0x56f/0x640 net/netlink/af_netlink.c:1365
netlink_sendmsg+0x665/0x770 net/netlink/af_netlink.c:1914
sock_sendmsg_nosec net/socket.c:725 [inline]
sock_sendmsg net/socket.c:748 [inline]
sock_write_iter+0x1aa/0x230 net/socket.c:1129
do_iter_write+0x4b4/0x7b0 fs/read_write.c:860
vfs_writev+0x1a8/0x320 fs/read_write.c:933
do_writev+0xf8/0x220 fs/read_write.c:976
__do_sys_writev fs/read_write.c:1049 [inline]
__se_sys_writev fs/read_write.c:1046 [inline]
__x64_sys_writev+0x45/0x50 fs/read_write.c:1046
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

read to 0xffff888150f31744 of 1 bytes by task 21839 on cpu 1:
fib_table_lookup+0x2bf/0xd50 net/ipv4/fib_trie.c:1585
fib_lookup include/net/ip_fib.h:383 [inline]
ip_route_output_key_hash_rcu+0x38c/0x12c0 net/ipv4/route.c:2751
ip_route_output_key_hash net/ipv4/route.c:2641 [inline]
__ip_route_output_key include/net/route.h:134 [inline]
ip_route_output_flow+0xa6/0x150 net/ipv4/route.c:2869
send4+0x1e7/0x500 drivers/net/wireguard/socket.c:61
wg_socket_send_skb_to_peer+0x94/0x130 drivers/net/wireguard/socket.c:175
wg_socket_send_buffer_to_peer+0xd6/0x100 drivers/net/wireguard/socket.c:200
wg_packet_send_handshake_initiation drivers/net/wireguard/send.c:40 [inline]
wg_packet_handshake_send_worker+0x10c/0x150 drivers/net/wireguard/send.c:51
process_one_work+0x434/0x860 kernel/workqueue.c:2600
worker_thread+0x5f2/0xa10 kernel/workqueue.c:2751
kthread+0x1d7/0x210 kernel/kthread.c:389
ret_from_fork+0x2e/0x40 arch/x86/kernel/process.c:145
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304

value changed: 0x00 -> 0x01

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 21839 Comm: kworker/u4:18 Tainted: G W 6.5.0-syzkaller #0

Fixes: dccd9ecc3744 ("ipv4: Do not use dead fib_info entries.")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230830095520.1046984-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

sctp: annotate data-races around sk->sk_wmem_queued

sk->sk_wmem_queued can be read locklessly from sctp_poll()

Use sk_wmem_queued_add() when the field is changed,
and add READ_ONCE() annotations in sctp_writeable()
and sctp_assocs_seq_show()

syzbot reported:

BUG: KCSAN: data-race in sctp_poll / sctp_wfree

read-write to 0xffff888149d77810 of 4 bytes by interrupt on cpu 0:
sctp_wfree+0x170/0x4a0 net/sctp/socket.c:9147
skb_release_head_state+0xb7/0x1a0 net/core/skbuff.c:988
skb_release_all net/core/skbuff.c:1000 [inline]
__kfree_skb+0x16/0x140 net/core/skbuff.c:1016
consume_skb+0x57/0x180 net/core/skbuff.c:1232
sctp_chunk_destroy net/sctp/sm_make_chunk.c:1503 [inline]
sctp_chunk_put+0xcd/0x130 net/sctp/sm_make_chunk.c:1530
sctp_datamsg_put+0x29a/0x300 net/sctp/chunk.c:128
sctp_chunk_free+0x34/0x50 net/sctp/sm_make_chunk.c:1515
sctp_outq_sack+0xafa/0xd70 net/sctp/outqueue.c:1381
sctp_cmd_process_sack net/sctp/sm_sideeffect.c:834 [inline]
sctp_cmd_interpreter net/sctp/sm_sideeffect.c:1366 [inline]
sctp_side_effects net/sctp/sm_sideeffect.c:1198 [inline]
sctp_do_sm+0x12c7/0x31b0 net/sctp/sm_sideeffect.c:1169
sctp_assoc_bh_rcv+0x2b2/0x430 net/sctp/associola.c:1051
sctp_inq_push+0x108/0x120 net/sctp/inqueue.c:80
sctp_rcv+0x116e/0x1340 net/sctp/input.c:243
sctp6_rcv+0x25/0x40 net/sctp/ipv6.c:1120
ip6_protocol_deliver_rcu+0x92f/0xf30 net/ipv6/ip6_input.c:437
ip6_input_finish net/ipv6/ip6_input.c:482 [inline]
NF_HOOK include/linux/netfilter.h:303 [inline]
ip6_input+0xbd/0x1b0 net/ipv6/ip6_input.c:491
dst_input include/net/dst.h:468 [inline]
ip6_rcv_finish+0x1e2/0x2e0 net/ipv6/ip6_input.c:79
NF_HOOK include/linux/netfilter.h:303 [inline]
ipv6_rcv+0x74/0x150 net/ipv6/ip6_input.c:309
__netif_receive_skb_one_core net/core/dev.c:5452 [inline]
__netif_receive_skb+0x90/0x1b0 net/core/dev.c:5566
process_backlog+0x21f/0x380 net/core/dev.c:5894
__napi_poll+0x60/0x3b0 net/core/dev.c:6460
napi_poll net/core/dev.c:6527 [inline]
net_rx_action+0x32b/0x750 net/core/dev.c:6660
__do_softirq+0xc1/0x265 kernel/softirq.c:553
run_ksoftirqd+0x17/0x20 kernel/softirq.c:921
smpboot_thread_fn+0x30a/0x4a0 kernel/smpboot.c:164
kthread+0x1d7/0x210 kernel/kthread.c:389
ret_from_fork+0x2e/0x40 arch/x86/kernel/process.c:145
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304

read to 0xffff888149d77810 of 4 bytes by task 17828 on cpu 1:
sctp_writeable net/sctp/socket.c:9304 [inline]
sctp_poll+0x265/0x410 net/sctp/socket.c:8671
sock_poll+0x253/0x270 net/socket.c:1374
vfs_poll include/linux/poll.h:88 [inline]
do_pollfd fs/select.c:873 [inline]
do_poll fs/select.c:921 [inline]
do_sys_poll+0x636/0xc00 fs/select.c:1015
__do_sys_ppoll fs/select.c:1121 [inline]
__se_sys_ppoll+0x1af/0x1f0 fs/select.c:1101
__x64_sys_ppoll+0x67/0x80 fs/select.c:1101
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

value changed: 0x00019e80 -> 0x0000cc80

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 17828 Comm: syz-executor.1 Not tainted 6.5.0-rc7-syzkaller-00185-g28f20a19294d #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/20230830094519.950007-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net/sched: fq_pie: avoid stalls in fq_pie_timer()

When setting a high number of flows (limit being 65536),
fq_pie_timer() is currently using too much time as syzbot reported.

Add logic to yield the cpu every 2048 flows (less than 150 usec
on debug kernels).
It should also help by not blocking qdisc fast paths for too long.
Worst case (65536 flows) would need 31 jiffies for a complete scan.

Relevant extract from syzbot report:

rcu: INFO: rcu_preempt detected expedited stalls on CPUs/tasks: { 0-.... } 2663 jiffies s: 873 root: 0x1/.
rcu: blocking rcu_node structures (internal RCU debug):
Sending NMI from CPU 1 to CPUs 0:
NMI backtrace for cpu 0
CPU: 0 PID: 5177 Comm: syz-executor273 Not tainted 6.5.0-syzkaller-00453-g727dbda16b83 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023
RIP: 0010:check_kcov_mode kernel/kcov.c:173 [inline]
RIP: 0010:write_comp_data+0x21/0x90 kernel/kcov.c:236
Code: 2e 0f 1f 84 00 00 00 00 00 65 8b 05 01 b2 7d 7e 49 89 f1 89 c6 49 89 d2 81 e6 00 01 00 00 49 89 f8 65 48 8b 14 25 80 b9 03 00 <a9> 00 01 ff 00 74 0e 85 f6 74 59 8b 82 04 16 00 00 85 c0 74 4f 8b
RSP: 0018:ffffc90000007bb8 EFLAGS: 00000206
RAX: 0000000000000101 RBX: ffffc9000dc0d140 RCX: ffffffff885893b0
RDX: ffff88807c075940 RSI: 0000000000000100 RDI: 0000000000000001
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffffc9000dc0d178
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
FS: 0000555555d54380(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f6b442f6130 CR3: 000000006fe1c000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<NMI>
</NMI>
<IRQ>
pie_calculate_probability+0x480/0x850 net/sched/sch_pie.c:415
fq_pie_timer+0x1da/0x4f0 net/sched/sch_fq_pie.c:387
call_timer_fn+0x1a0/0x580 kernel/time/timer.c:1700

Fixes: ec97ecf1ebe4 ("net: sched: add Flow Queue PIE packet scheduler")
Link: https://lore.kernel.org/lkml/00000000000017ad3f06040bf394@google.com/
Reported-by: syzbot+e46fbd5289363464bc13@syzkaller.appspotmail.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20230829123541.3745013-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge tag 'nf-23-08-31' of git://git./linux/kernel/git/netfilter/nf

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Fix mangling of TCP options with non-linear skbuff, from Xiao Liang.

2) OOB read in xt_sctp due to missing sanitization of array length field.
   From Wander Lairson Costa.

3) OOB read in xt_u32 due to missing sanitization of array length field.
   Also from Wander Lairson Costa.

All of them above, always broken for several releases.

4) Missing audit log for set element reset command, from Phil Sutter.

5) Missing audit log for rule reset command, also from Phil.

These audit log support are missing in 6.5.

* tag 'nf-23-08-31' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nf_tables: Audit log rule reset
  netfilter: nf_tables: Audit log setelem reset
  netfilter: xt_u32: validate user space input
  netfilter: xt_sctp: validate the flag_info count
  netfilter: nft_exthdr: Fix non-linear header modification
====================

Link: https://lore.kernel.org/r/20230830235935.465690-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

doc/netlink: Fix missing classic_netlink doc reference

Add missing cross-reference label for classic_netlink.

Fixes: 2db8abf0b455 ("doc/netlink: Document the netlink-raw schema extensions")
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20230829085539.36354-1-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

NFC: nxp: add NXP1002

It is backwards compatible

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230829084717.961-1-oneukum@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: stmmac: failure to probe without MAC interface specified

Alexander Stein reports that commit a014c35556b9 ("net: stmmac: clarify
difference between "interface" and "phy_interface"") caused breakage,
because plat->mac_interface will never be negative. Fix this by using
the "rc" temporary variable in stmmac_probe_config_dt().

Reported-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/E1qayn0-006Q8J-GE@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

netfilter: nf_tables: Audit log rule reset

Resetting rules' stateful data happens outside of the transaction logic,
so 'get' and 'dump' handlers have to emit audit log entries themselves.

Fixes: 8daa8fde3fc3f ("netfilter: nf_tables: Introduce NFT_MSG_GETRULE_RESET")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nf_tables: Audit log setelem reset

Since set element reset is not integrated into nf_tables' transaction
logic, an explicit log call is needed, similar to NFT_MSG_GETOBJ_RESET
handling.

For the sake of simplicity, catchall element reset will always generate
a dedicated log entry. This relieves nf_tables_dump_set() from having to
adjust the logged element count depending on whether a catchall element
was found or not.

Fixes: 079cd633219d7 ("netfilter: nf_tables: Introduce NFT_MSG_GETSETELEM_RESET")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: xt_u32: validate user space input

The xt_u32 module doesn't validate the fields in the xt_u32 structure.
An attacker may take advantage of this to trigger an OOB read by setting
the size fields with a value beyond the arrays boundaries.

Add a checkentry function to validate the structure.

This was originally reported by the ZDI project (ZDI-CAN-18408).

Fixes: 1b50b8a371e9 ("[NETFILTER]: Add u32 match")
Cc: stable@vger.kernel.org
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: xt_sctp: validate the flag_info count

sctp_mt_check doesn't validate the flag_count field. An attacker can
take advantage of that to trigger a OOB read and leak memory
information.

Add the field validation in the checkentry function.

Fixes: 2e4e6a17af35 ("[NETFILTER] x_tables: Abstraction layer for {ip,ip6,arp}_tables")
Cc: stable@vger.kernel.org
Reported-by: Lucas Leong <wmliang@infosec.exchange>
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nft_exthdr: Fix non-linear header modification

Fix skb_ensure_writable() size. Don't use nft_tcp_header_pointer() to
make it explicit that pointers point to the packet (not local buffer).

Fixes: 99d1712bc41c ("netfilter: exthdr: tcp option set support")
Fixes: 7890cbea66e7 ("netfilter: exthdr: add support for tcp option removal")
Cc: stable@vger.kernel.org
Signed-off-by: Xiao Liang <shaw.leon@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

bpf, docs: s/eBPF/BPF in standards documents

There isn't really anything other than just "BPF" at this point,
so referring to it as "eBPF" in our standards document just causes
unnecessary confusion. Let's just be consistent and use "BPF".

Suggested-by: Will Hawkins <hawkinsw@obs.cr>
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230828155948.123405-4-void@manifault.com

bpf, docs: Add abi.rst document to standardization subdirectory

As specified in the IETF BPF charter, the BPF working group has plans to
add one or more informational documents that recommend conventions and
guidelines for producing portable BPF program binaries. The
instruction-set.rst document currently contains a "Registers and calling
convention" subsection which dictates a calling convention that belongs
in an ABI document, rather than an instruction set document. Let's move
it to a new abi.rst document so we can clean it up. The abi.rst document
will of course be significantly changed and expanded upon over time. For
now, it's really just a placeholder which will contain ABI-specific
language that doesn't belong in other documents.

Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230828155948.123405-3-void@manifault.com

bpf, docs: Move linux-notes.rst to root bpf docs tree

In commit 4d496be9ca05 ("bpf,docs: Create new standardization
subdirectory"), I added a standardization/ directory to the BPF
documentation, which will contain the docs that will be standardized
as part of the effort with the IETF.

I included linux-notes.rst in that directory, but I shouldn't have. It
doesn't contain anything that will be standardized. Let's move it back
to Documentation/bpf.

Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230828155948.123405-2-void@manifault.com

net: ipv4, ipv6: fix IPSTATS_MIB_OUTOCTETS increment duplicated

commit edf391ff1723 ("snmp: add missing counters for RFC 4293") had
already added OutOctets for RFC 4293. In commit 2d8dbb04c63e ("snmp: fix
OutOctets counter to include forwarded datagrams"), OutOctets was
counted again, but not removed from ip_output().

According to RFC 4293 "3.2.3. IP Statistics Tables",
ipipIfStatsOutTransmits is not equal to ipIfStatsOutForwDatagrams. So
"IPSTATS_MIB_OUTOCTETS must be incremented when incrementing" is not
accurate. And IPSTATS_MIB_OUTOCTETS should be counted after fragment.

This patch reverts commit 2d8dbb04c63e ("snmp: fix OutOctets counter to
include forwarded datagrams") and move IPSTATS_MIB_OUTOCTETS to
ip_finish_output2 for ipv4.

Reviewed-by: Filip Pudak <filip.pudak@windriver.com>
Signed-off-by: Heng Guo <heng.guo@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bpf, sockmap: Fix preempt_rt splat when using raw_spin_lock_t

Sockmap and sockhash maps are a collection of psocks that are
objects representing a socket plus a set of metadata needed
to manage the BPF programs associated with the socket. These
maps use the stab->lock to protect from concurrent operations
on the maps, e.g. trying to insert to objects into the array
at the same time in the same slot. Additionally, a sockhash map
has a bucket lock to protect iteration and insert/delete into
the hash entry.

Each psock has a psock->link which is a linked list of all the
maps that a psock is attached to. This allows a psock (socket)
to be included in multiple sockmap and sockhash maps. This
linked list is protected the psock->link_lock.

They _must_ be nested correctly to avoid deadlock:

  lock(stab->lock)
    : do BPF map operations and psock insert/delete
    lock(psock->link_lock)
       : add map to psock linked list of maps
    unlock(psock->link_lock)
  unlock(stab->lock)

For non PREEMPT_RT kernels both raw_spin_lock_t and spin_lock_t
are guaranteed to not sleep. But, with PREEMPT_RT kernels the
spin_lock_t variants may sleep. In the current code we have
many patterns like this:

   rcu_critical_section:
      raw_spin_lock(stab->lock)
         spin_lock(psock->link_lock) <- may sleep ouch
         spin_unlock(psock->link_lock)
      raw_spin_unlock(stab->lock)
   rcu_critical_section

Nesting spin_lock() inside a raw_spin_lock() violates locking
rules for PREEMPT_RT kernels. And additionally we do alloc(GFP_ATOMICS)
inside the stab->lock, but those might sleep on PREEMPT_RT kernels.
The result is splats like this:

./test_progs -t sockmap_basic
[   33.344330] bpf_testmod: loading out-of-tree module taints kernel.
[   33.441933]
[   33.442089] =============================
[   33.442421] [ BUG: Invalid wait context ]
[   33.442763] 6.5.0-rc5-01731-gec0ded2e0282 #4958 Tainted: G           O
[   33.443320] -----------------------------
[   33.443624] test_progs/2073 is trying to lock:
[   33.443960] ffff888102a1c290 (&psock->link_lock){....}-{3:3}, at: sock_map_update_common+0x2c2/0x3d0
[   33.444636] other info that might help us debug this:
[   33.444991] context-{5:5}
[   33.445183] 3 locks held by test_progs/2073:
[   33.445498]  #0: ffff88811a208d30 (sk_lock-AF_INET){+.+.}-{0:0}, at: sock_map_update_elem_sys+0xff/0x330
[   33.446159]  #1: ffffffff842539e0 (rcu_read_lock){....}-{1:3}, at: sock_map_update_elem_sys+0xf5/0x330
[   33.446809]  #2: ffff88810d687240 (&stab->lock){+...}-{2:2}, at: sock_map_update_common+0x177/0x3d0
[   33.447445] stack backtrace:
[   33.447655] CPU: 10 PID

To fix observe we can't readily remove the allocations (for that
we would need to use/create something similar to bpf_map_alloc). So
convert raw_spin_lock_t to spin_lock_t. We note that sock_map_update
that would trigger the allocate and potential sleep is only allowed
through sys_bpf ops and via sock_ops which precludes hw interrupts
and low level atomic sections in RT preempt kernel. On non RT
preempt kernel there are no changes here and spin locks sections
and alloc(GFP_ATOMIC) are still not sleepable.

Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230830053517.166611-1-john.fastabend@gmail.com

docs/bpf: Add description for CO-RE relocations

Add a section on CO-RE relocations to llvm_relo.rst. Describe relevant .BTF.ext
structure, `enum bpf_core_relo_kind` and `struct bpf_core_relo` in some detail.

Description is based on doc-strings from:

- include/uapi/linux/bpf.h:struct bpf_core_relo
- tools/lib/bpf/relo_core.c:__bpf_core_types_match()

Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20230826222912.2560865-2-eddyz87@gmail.com

bpf, docs: Correct source of offset for program-local call

The offset to use when calculating the target of a program-local call is
in the instruction's imm field, not its offset field.

Signed-off-by: Will Hawkins <hawkinsw@obs.cr>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/bpf/20230826053258.1860167-1-hawkinsw@obs.cr

selftests/bpf: Fix flaky cgroup_iter_sleepable subtest

Occasionally, with './test_progs -j' on my vm, I will hit the
following failure:

  test_cgrp_local_storage:PASS:join_cgroup /cgrp_local_storage 0 nsec
  test_cgroup_iter_sleepable:PASS:skel_open 0 nsec
  test_cgroup_iter_sleepable:PASS:skel_load 0 nsec
  test_cgroup_iter_sleepable:PASS:attach_iter 0 nsec
  test_cgroup_iter_sleepable:PASS:iter_create 0 nsec
  test_cgroup_iter_sleepable:FAIL:cgroup_id unexpected cgroup_id: actual 1 != expected 2812
  #48/5    cgrp_local_storage/cgroup_iter_sleepable:FAIL
  #48      cgrp_local_storage:FAIL

Finally, I decided to do some investigation since the test is introduced
by myself. It turns out the reason is due to cgroup_fd with value 0.
In cgroup_iter, a cgroup_fd of value 0 means the root cgroup.

/* from cgroup_iter.c */
        if (fd)
                cgrp = cgroup_v1v2_get_from_fd(fd);
        else if (id)
                cgrp = cgroup_get_from_id(id);
        else /* walk the entire hierarchy by default. */
                cgrp = cgroup_get_from_path("/");

That is why we got cgroup_id 1 instead of expected 2812.

Why we got a cgroup_fd 0? Nobody should really touch 'stdin' (fd 0) in
test_progs. I traced 'close' syscall with stack trace and found the root
cause, which is a bug in bpf_obj_pinning.c. Basically, the code closed
fd 0 although it should not. Fixing the bug in bpf_obj_pinning.c also
resolved the above cgroup_iter_sleepable subtest failure.

Fixes: 3b22f98e5a05 ("selftests/bpf: Add path_fd-based BPF_OBJ_PIN and BPF_OBJ_GET tests")
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230827150551.1743497-1-yonghong.song@linux.dev

xsk: Fix xsk_build_skb() error: 'skb' dereferencing possible ERR_PTR()

Currently, xsk_build_skb() is a function that builds skb in two possible
ways and then is ended with common error handling.

We can distinguish four possible error paths and handling in xsk_build_skb():

1. sock_alloc_send_skb fails: Retry (skb is NULL).
2. skb_store_bits fails : Free skb and retry.
3. MAX_SKB_FRAGS exceeded: Free skb, cleanup and drop packet.
4. alloc_page fails for frag: Retry page allocation w/o freeing skb

1] and 3] can happen in xsk_build_skb_zerocopy(), which is one of the
two code paths responsible for building skb. Common error path in
xsk_build_skb() assumes that in case errno != -EAGAIN, skb is a valid
pointer, which is wrong as kernel test robot reports that in
xsk_build_skb_zerocopy() other errno values are returned for skb being
NULL.

To fix this, set -EOVERFLOW as error when MAX_SKB_FRAGS are exceeded
and packet needs to be dropped in both xsk_build_skb() and
xsk_build_skb_zerocopy() and use this to distinguish against all other
error cases. Also, add explicit kfree_skb() for 3] so that handling
of 1], 2], and 3] becomes identical where allocation needs to be retried.

Fixes: cf24f5a5feea ("xsk: add support for AF_XDP multi-buffer on Tx path")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Tirthendu Sarkar <tirthendu.sarkar@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Closes: https://lore.kernel.org/r/202307210434.OjgqFcbB-lkp@intel.com
Link: https://lore.kernel.org/bpf/20230823144713.2231808-1-tirthendu.sarkar@intel.com

bpftool: Fix build warnings with -Wtype-limits

Quentin reported build warnings when building bpftool :

    link.c: In function ‘perf_config_hw_cache_str’:
    link.c:86:18: warning: comparison of unsigned expression in ‘>= 0’ is always true [-Wtype-limits]
       86 |         if ((id) >= 0 && (id) < ARRAY_SIZE(array))      \
          |                  ^~
    link.c:320:20: note: in expansion of macro ‘perf_event_name’
      320 |         hw_cache = perf_event_name(evsel__hw_cache, config & 0xff);
          |                    ^~~~~~~~~~~~~~~
    [... more of the same for the other calls to perf_event_name ...]

He also pointed out the reason and the solution:

  We're always passing unsigned, so it should be safe to drop the check on
  (id) >= 0.

Fixes: 62b57e3ddd64 ("bpftool: Add perf event names")
Reported-by: Quentin Monnet <quentin@isovalent.com>
Suggested-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Closes: https://lore.kernel.org/bpf/a35d9a2d-54a0-49ec-9ed1-8fcf1369d3cc@isovalent.com
Link: https://lore.kernel.org/bpf/20230830030325.3786-1-laoar.shao@gmail.com

bpf: Prevent inlining of bpf_fentry_test7()

With latest clang18, I hit test_progs failures for the following test:

  #13/2    bpf_cookie/multi_kprobe_link_api:FAIL
  #13/3    bpf_cookie/multi_kprobe_attach_api:FAIL
  #13      bpf_cookie:FAIL
  #75      fentry_fexit:FAIL
  #76/1    fentry_test/fentry:FAIL
  #76      fentry_test:FAIL
  #80/1    fexit_test/fexit:FAIL
  #80      fexit_test:FAIL
  #110/1   kprobe_multi_test/skel_api:FAIL
  #110/2   kprobe_multi_test/link_api_addrs:FAIL
  #110/3   kprobe_multi_test/link_api_syms:FAIL
  #110/4   kprobe_multi_test/attach_api_pattern:FAIL
  #110/5   kprobe_multi_test/attach_api_addrs:FAIL
  #110/6   kprobe_multi_test/attach_api_syms:FAIL
  #110     kprobe_multi_test:FAIL

For example, for #13/2, the error messages are:

  [...]
  kprobe_multi_test_run:FAIL:kprobe_test7_result unexpected kprobe_test7_result: actual 0 != expected 1
  [...]
  kprobe_multi_test_run:FAIL:kretprobe_test7_result unexpected kretprobe_test7_result: actual 0 != expected 1

clang17 does not have this issue.

Further investigation shows that kernel func bpf_fentry_test7(), used in
the above tests, is inlined by the compiler although it is marked as
noinline.

  int noinline bpf_fentry_test7(struct bpf_fentry_test_t *arg)
  {
        return (long)arg;
  }

It is known that for simple functions like the above (e.g. just returning
a constant or an input argument), the clang compiler may still do inlining
for a noinline function. Adding 'asm volatile ("")' in the beginning of the
bpf_fentry_test7() can prevent inlining.

Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20230826200843.2210074-1-yonghong.song@linux.dev

Merge tag 'net-next-6.6' of git://git./linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"Core:

   - Increase size limits for to-be-sent skb frag allocations. This
     allows tun, tap devices and packet sockets to better cope with
     large writes operations

   - Store netdevs in an xarray, to simplify iterating over netdevs

   - Refactor nexthop selection for multipath routes

   - Improve sched class lifetime handling

   - Add backup nexthop ID support for bridge

   - Implement drop reasons support in openvswitch

   - Several data races annotations and fixes

   - Constify the sk parameter of routing functions

   - Prepend kernel version to netconsole message

  Protocols:

   - Implement support for TCP probing the peer being under memory
     pressure

   - Remove hard coded limitation on IPv6 specific info placement inside
     the socket struct

   - Get rid of sysctl_tcp_adv_win_scale and use an auto-estimated per
     socket scaling factor

   - Scaling-up the IPv6 expired route GC via a separated list of
     expiring routes

   - In-kernel support for the TLS alert protocol

   - Better support for UDP reuseport with connected sockets

   - Add NEXT-C-SID support for SRv6 End.X behavior, reducing the SR
     header size

   - Get rid of additional ancillary per MPTCP connection struct socket

   - Implement support for BPF-based MPTCP packet schedulers

   - Format MPTCP subtests selftests results in TAP

   - Several new SMC 2.1 features including unique experimental options,
     max connections per lgr negotiation, max links per lgr negotiation

  BPF:

   - Multi-buffer support in AF_XDP

   - Add multi uprobe BPF links for attaching multiple uprobes and usdt
     probes, which is significantly faster and saves extra fds

   - Implement an fd-based tc BPF attach API (TCX) and BPF link support
     on top of it

   - Add SO_REUSEPORT support for TC bpf_sk_assign

   - Support new instructions from cpu v4 to simplify the generated code
     and feature completeness, for x86, arm64, riscv64

   - Support defragmenting IPv(4|6) packets in BPF

   - Teach verifier actual bounds of bpf_get_smp_processor_id() and fix
     perf+libbpf issue related to custom section handling

   - Introduce bpf map element count and enable it for all program types

   - Add a BPF hook in sys_socket() to change the protocol ID from
     IPPROTO_TCP to IPPROTO_MPTCP to cover migration for legacy

   - Introduce bpf_me_mcache_free_rcu() and fix OOM under stress

   - Add uprobe support for the bpf_get_func_ip helper

   - Check skb ownership against full socket

   - Support for up to 12 arguments in BPF trampoline

   - Extend link_info for kprobe_multi and perf_event links

  Netfilter:

   - Speed-up process exit by aborting ruleset validation if a fatal
     signal is pending

   - Allow NLA_POLICY_MASK to be used with BE16/BE32 types

  Driver API:

   - Page pool optimizations, to improve data locality and cache usage

   - Introduce ndo_hwtstamp_get() and ndo_hwtstamp_set() to avoid the
     need for raw ioctl() handling in drivers

   - Simplify genetlink dump operations (doit/dumpit) providing them the
     common information already populated in struct genl_info

   - Extend and use the yaml devlink specs to [re]generate the split ops

   - Introduce devlink selective dumps, to allow SF filtering SF based
     on handle and other attributes

   - Add yaml netlink spec for netlink-raw families, allow route, link
     and address related queries via the ynl tool

   - Remove phylink legacy mode support

   - Support offload LED blinking to phy

   - Add devlink port function attributes for IPsec

  New hardware / drivers:

   - Ethernet:
      - Broadcom ASP 2.0 (72165) ethernet controller
      - MediaTek MT7988 SoC
      - Texas Instruments AM654 SoC
      - Texas Instruments IEP driver
      - Atheros qca8081 phy
      - Marvell 88Q2110 phy
      - NXP TJA1120 phy

   - WiFi:
      - MediaTek mt7981 support

   - Can:
      - Kvaser SmartFusion2 PCI Express devices
      - Allwinner T113 controllers
      - Texas Instruments tcan4552/4553 chips

   - Bluetooth:
      - Intel Gale Peak
      - Qualcomm WCN3988 and WCN7850
      - NXP AW693 and IW624
      - Mediatek MT2925

  Drivers:

   - Ethernet NICs:
      - nVidia/Mellanox:
         - mlx5:
            - support UDP encapsulation in packet offload mode
            - IPsec packet offload support in eswitch mode
            - improve aRFS observability by adding new set of counters
            - extends MACsec offload support to cover RoCE traffic
            - dynamic completion EQs
         - mlx4:
            - convert to use auxiliary bus instead of custom interface
              logic
      - Intel
         - ice:
            - implement switchdev bridge offload, even for LAG
              interfaces
            - implement SRIOV support for LAG interfaces
         - igc:
            - add support for multiple in-flight TX timestamps
      - Broadcom:
         - bnxt:
            - use the unified RX page pool buffers for XDP and non-XDP
            - use the NAPI skb allocation cache
      - OcteonTX2:
         - support Round Robin scheduling HTB offload
         - TC flower offload support for SPI field
      - Freescale:
         - add XDP_TX feature support
      - AMD:
         - ionic: add support for PCI FLR event
         - sfc:
            - basic conntrack offload
            - introduce eth, ipv4 and ipv6 pedit offloads
      - ST Microelectronics:
         - stmmac: maximze PTP timestamping resolution

   - Virtual NICs:
      - Microsoft vNIC:
         - batch ringing RX queue doorbell on receiving packets
         - add page pool for RX buffers
      - Virtio vNIC:
         - add per queue interrupt coalescing support
      - Google vNIC:
         - add queue-page-list mode support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add port range matching tc-flower offload
         - permit enslavement to netdevices with uppers

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - convert to phylink_pcs
      - Renesas:
         - r8A779fx: add speed change support
         - rzn1: enables vlan support

   - Ethernet PHYs:
      - convert mv88e6xxx to phylink_pcs

   - WiFi:
      - Qualcomm Wi-Fi 7 (ath12k):
         - extremely High Throughput (EHT) PHY support
      - RealTek (rtl8xxxu):
         - enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU),
           RTL8192EU and RTL8723BU
      - RealTek (rtw89):
         - Introduce Time Averaged SAR (TAS) support

   - Connector:
      - support for event filtering"

* tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1806 commits)
  net: ethernet: mtk_wed: minor change in wed_{tx,rx}info_show
  net: ethernet: mtk_wed: add some more info in wed_txinfo_show handler
  net: stmmac: clarify difference between "interface" and "phy_interface"
  r8152: add vendor/device ID pair for D-Link DUB-E250
  devlink: move devlink_notify_register/unregister() to dev.c
  devlink: move small_ops definition into netlink.c
  devlink: move tracepoint definitions into core.c
  devlink: push linecard related code into separate file
  devlink: push rate related code into separate file
  devlink: push trap related code into separate file
  devlink: use tracepoint_enabled() helper
  devlink: push region related code into separate file
  devlink: push param related code into separate file
  devlink: push resource related code into separate file
  devlink: push dpipe related code into separate file
  devlink: move and rename devlink_dpipe_send_and_alloc_skb() helper
  devlink: push shared buffer related code into separate file
  devlink: push port related code into separate file
  devlink: push object register/unregister notifications into separate helpers
  inet: fix IP_TRANSPARENT error handling
  ...

Merge tag 'v6.6-p1' of git://git./linux/kernel/git/herbert/crypto-2.6

Pull crypto updates from Herbert Xu:
"API:
   - Move crypto engine callback from tfm ctx into algorithm object
   - Fix atomic sleep bug in crypto_destroy_instance
   - Move lib/mpi into lib/crypto

  Algorithms:
   - Add chacha20 and poly1305 implementation for powerpc p10

  Drivers:
   - Add AES skcipher and aead support to starfive
   - Add Dynamic Boost Control support to ccp
   - Add support for STM32P13 platform to stm32"

* tag 'v6.6-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (149 commits)
  Revert "dt-bindings: crypto: qcom,prng: Add SM8450"
  crypto: chelsio - Remove unused declarations
  X.509: if signature is unsupported skip validation
  crypto: qat - fix crypto capability detection for 4xxx
  crypto: drivers - Explicitly include correct DT includes
  crypto: engine - Remove crypto_engine_ctx
  crypto: zynqmp - Use new crypto_engine_op interface
  crypto: virtio - Use new crypto_engine_op interface
  crypto: stm32 - Use new crypto_engine_op interface
  crypto: jh7110 - Use new crypto_engine_op interface
  crypto: rk3288 - Use new crypto_engine_op interface
  crypto: omap - Use new crypto_engine_op interface
  crypto: keembay - Use new crypto_engine_op interface
  crypto: sl3516 - Use new crypto_engine_op interface
  crypto: caam - Use new crypto_engine_op interface
  crypto: aspeed - Remove non-standard sha512 algorithms
  crypto: aspeed - Use new crypto_engine_op interface
  crypto: amlogic - Use new crypto_engine_op interface
  crypto: sun8i-ss - Use new crypto_engine_op interface
  crypto: sun8i-ce - Use new crypto_engine_op interface
  ...

Merge tag 'gpio-updates-for-v6.6' of git://git./linux/kernel/git/brgl/linux

Pull gpio updates from Bartosz Golaszewski:
"We have a lot of code refactoring using common helpers and ended up
  removing more lines then we're adding this release cycle.

  Nothing really stands out, just small updates all over the place.

  Core GPIOLIB updates:
   - wake-up poll() in user-space on device unbind
   - improve fwnode usage
   - interrupt domain handling improvements
   - correctly handle the ngpios property in gpio-mmio

  Driver cleanups:
   - remove unneeded calls to platform_set_drvdata() all around the
     place
   - remove unneeded of_match_ptr() expansions whenever a driver depends
     on CONFIG_OF
   - remove redundant calls to dev_err_probe() from gpio-omap and
     gpio-davinci

  Driver improvements:
   - use autopointers and guards from cleanup.h in gpio-sim
   - shrink code in gpio-sim using some common helpers
   - convert the idio family of drivers to using gpio-regmap
   - convert gpio-ws16c48 to using gpio-regmap
   - use devres to simplify code in gpio-pisosr and gpio-mxc
   - update gpio-sifive: support IRQ wake, improve interrupt handling,
     allow building as module
   - make gpio-ge and gpio-bcm-kona OF-independent (plus some minor
     tweaks)
   - add support for new models in gpio-pca953x and gpio-ds4520
   - add runtime PM support to gpio-mxc
   - fix a build warning in gpio-mxs
   - add support for adding pin ranges to gpio-mlxbf3
   - add counter/timer support to gpio-104-dio-48e
   - switch to dynamic GPIO base allocation in gpio-vf610
   - minor oneliners here and there

  Device-tree bindings updates:
   - enable the gpio-line-names property in snps,dw-apb and STMPE GPIO
   - document new models in fsl-imx-gpio, ds4520 and pca95xx
   - convert the bindings for brcm,kona-gpio to YAML"

* tag 'gpio-updates-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (94 commits)
  gpio: pca953x: add support for TCA9538
  dt-bindings: gpio: pca95xx: document new tca9538 chip
  gpio: pca953x: Use i2c_get_match_data()
  gpio: mlxbf3: use capital "OR" for multiple licenses in SPDX
  gpio: pcf857x: Extend match data support for OF tables
  gpio: vf610: switch to dynamic allocat GPIO base
  gpiolib: provide and use gpiod_line_state_notify()
  gpio: cdev: wake up lineevent poll() on device unbind
  gpio: cdev: wake up linereq poll() on device unbind
  gpio: cdev: wake up chardev poll() on device unbind
  gpiolib: add a second blocking notifier to struct gpio_device
  gpio: cdev: open-code to_gpio_chardev_data()
  gpiolib: rename the gpio_device notifier
  gpio: mlxbf3: Support add_pin_ranges()
  gpio: mxc: Use helper function devm_clk_get_optional_enabled()
  gpio: pca9570: fix kerneldoc
  gpio: sim: simplify code with cleanup helpers
  gpio: sim: replace memmove() + strstrip() with skip_spaces() + strim()
  gpio: sim: simplify gpio_sim_device_config_live_store()
  gpio: mxc: release the parent IRQ in runtime suspend
  ...

Merge tag 'hwmon-for-v6.6' of git://git./linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:
"New drivers:

   - Renesas HS3001

  Chip support added to existing drivers:

   - pmbus/mp2975 driver now supports MP2971 and MP2973

  Functional improvements:

   - Additional voltage and temperature sensor support for
     NCT6798/NCT6799 in nt6755 driver

   - it87 driver now detects AMDTSI sensor type

   - dimmtemp now supports more than 32 DIMMs

  Driver removals:

   - sm665 driver removed as unsupportable and long since obsolete

  .. and minor fixes, cleanups, and simplifications in several drivers"

* tag 'hwmon-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (57 commits)
  hwmon: (tmp513) Simplify probe()
  hwmon: (tmp513) Fix the channel number in tmp51x_is_visible()
  hwmon: (mlxreg-fan) Extend number of supported fans
  hwmon: (sis5595) Do PCI error checks on own line
  hwmon: (vt8231) Do PCI error checks on own line
  hwmon: (via686a) Do PCI error checks on own line
  hwmon: pmbus: Fix -EIO seen on pli1209
  hwmon: pmbus: Drop unnecessary clear fault page
  hwmon: pmbus: Reduce clear fault page invocations
  hwmon: (nsa320-hwmon) Remove redundant of_match_ptr()
  hwmon: (pmbus/ucd9200) fix Wvoid-pointer-to-enum-cast warning
  hwmon: (pmbus/ucd9000) fix Wvoid-pointer-to-enum-cast warning
  hwmon: (pmbus/tps53679) fix Wvoid-pointer-to-enum-cast warning
  hwmon: (pmbus/ibm-cffps) fix Wvoid-pointer-to-enum-cast warning
  hwmon: (tmp513) fix Wvoid-pointer-to-enum-cast warning
  hwmon: (max6697) fix Wvoid-pointer-to-enum-cast warning
  hwmon: (max20730) fix Wvoid-pointer-to-enum-cast warning
  hwmon: (lm90) fix Wvoid-pointer-to-enum-cast warning
  hwmon: (lm85) fix Wvoid-pointer-to-enum-cast warning
  hwmon: (lm75) fix Wvoid-pointer-to-enum-cast warning
  ...

Merge tag 'mmc-v6.6' of git://git./linux/kernel/git/ulfh/mmc

Pull MMC updates from Ulf Hansson:
"MMC core:
   - Convert drivers to use the ->remove_new() callback
   - Propagate the removable attribute for the card's device

  MMC host:
   - Convert drivers to use the ->remove_new() callback
   - atmel-mci: Convert to gpio descriptors and cleanup the code
   - davinci: Make SDIO irq truly optional
   - renesas_sdhi: Register irqs before registering controller
   - sdhci: Simplify the sdhci_pltfm_* interface a bit
   - sdhci-esdhc-imx: Improve support for the 1.8V errata
   - sdhci-of-at91: Add support for the microchip sam9x7 variant
   - sdhci-of-dwcmshc: Add support for runtime PM
   - sdhci-pci-o2micro: Add support for the new Bayhub GG8 variant
   - sdhci-sprd: Add support for SD high-speed mode tuning
   - uniphier-sd: Register irqs before registering controller"

* tag 'mmc-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (108 commits)
  mmc: atmel-mci: Move card detect gpio polarity quirk to gpiolib
  mmc: atmel-mci: move atmel MCI header file
  mmc: atmel-mci: Convert to gpio descriptors
  mmc: sdhci-sprd: Add SD HS mode online tuning
  mmc: core: Add host specific tuning support for SD HS mode
  mmc: sdhci-of-dwcmshc: Add runtime PM operations
  mmc: sdhci-of-dwcmshc: Add error handling in dwcmshc_resume
  mmc: sdhci-esdhc-imx: improve ESDHC_FLAG_ERR010450
  mmc: sdhci-pltfm: Rename sdhci_pltfm_register()
  mmc: sdhci-pltfm: Remove sdhci_pltfm_unregister()
  mmc: sdhci-st: Use sdhci_pltfm_remove()
  mmc: sdhci-pxav2: Use sdhci_pltfm_remove()
  mmc: sdhci-of-sparx5: Use sdhci_pltfm_remove()
  mmc: sdhci-of-hlwd: Use sdhci_pltfm_remove()
  mmc: sdhci-of-esdhc: Use sdhci_pltfm_remove()
  mmc: sdhci-of-at91: Use sdhci_pltfm_remove()
  mmc: sdhci-of-arasan: Use sdhci_pltfm_remove()
  mmc: sdhci-iproc: Use sdhci_pltfm_remove()
  mmc: sdhci_f_sdh30: Use sdhci_pltfm_remove()
  mmc: sdhci-dove: Use sdhci_pltfm_remove()
  ...

Merge tag 'spi-v6.6' of git://git./linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
"There's been quite a lot of generic activity here, but more
  administrative than featuers. We also have a bunch of new drivers,
  including one that's part of a MFD so we pulled in the core parts of
  that:

   - Lots of work from both Yang Yingliang and Andy Shevchenko on moving
     to host/device/controller based terminology for devices.

   - QuadSPI SPI support for Allwinner sun6i.

   - New device support Cirrus Logic CS43L43, Longsoon, Qualcomm GENI
     QuPv3 and StarFive JH7110 QSPI"

* tag 'spi-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (151 commits)
  spi: at91-usart: Use PTR_ERR_OR_ZERO() to simplify code
  spi: spi-sn-f-ospi: switch to use modern name
  spi: sifive: switch to use modern name
  spi: sh: switch to use modern name
  spi: sh-sci: switch to use modern name
  spi: sh-msiof: switch to use modern name
  spi: sh-hspi: switch to use modern name
  spi: sc18is602: switch to use modern name
  spi: s3c64xx: switch to use modern name
  spi: rzv2m-csi: switch to use devm_spi_alloc_host()
  spi: rspi: switch to use spi_alloc_host()
  spi: rockchip: switch to use modern name
  spi: rockchip-sfc: switch to use modern name
  spi: realtek-rtl: switch to use devm_spi_alloc_host()
  spi: rb4xx: switch to use modern name
  spi: qup: switch to use modern name
  spi: spi-qcom-qspi: switch to use modern name
  spi: pxa2xx: switch to use modern name
  spi: ppc4xx: switch to use modern name
  spi: spl022: switch to use modern name
  ...

Merge tag 'regulator-v6.6' of git://git./linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
"Other than new device support and some minor fixes this has been a
  really quiet release, the only notable things are the new drivers.

  There's a couple of MFDs among the new devices so the generic parts
  are pulled in:

   - Support for Analog Devices MAX77831/57/59, Awinc AW37503, Qualcom
     PMX75 and RFGEN, RealTek RT5733, RichTek RTQ2208 and Texas
     Instruments TPS65086"

* tag 'regulator-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (68 commits)
  regulator: userspace-consumer: Drop event support for this cycle
  regulator: aw37503: Switch back to use struct i2c_driver's .probe()
  dt-bindings: regulator: qcom,rpmh-regulator: allow i, j, l, m & n as RPMh resource name suffix
  regulator: dt-bindings: Add Awinic AW37503
  regulator: aw37503: add regulator driver for Awinic AW37503
  regulator: tps65086: Select dedicated regulator config for chip variant
  mfd: tps65086: Read DEVICE ID register 1 from device
  regulator: raa215300: Update help description
  regulator: raa215300: Add missing blank space
  regulator: raa215300: Change rate from 32000->32768
  regulator: db8500-prcmu: Remove unused declaration power_state_active_is_enabled()
  regulator: raa215300: Add const definition
  regulator: raa215300: Fix resource leak in case of error
  regulator: rtq2208: Switch back to use struct i2c_driver's .probe()
  regulator: lp872x: Fix Wvoid-pointer-to-enum-cast warning
  regulator: max77857: Fix Wvoid-pointer-to-enum-cast warning
  regulator: ltc3589: Fix Wvoid-pointer-to-enum-cast warning
  regulator: qcom_rpm-regulator: Use devm_kmemdup to replace devm_kmalloc + memcpy
  regulator: tps6286x-regulator: Remove redundant of_match_ptr() macros
  regulator: pfuze100-regulator: Remove redundant of_match_ptr() macro
  ...

Merge tag 'regmap-v6.6' of git://git./linux/kernel/git/broonie/regmap

Pull regmap updates from Mark Brown:
"This is a much quieter release than the past few, there's one small
  API addition that I noticed a user for in ALSA and a bunch of
  cleanups:

   - Provide an interface for determining if a register is present in
     the cache and add a user of it in ALSA.

   - Full support for dynamic allocations, following the temporary
     bodges that were done as fixes in the previous release.

   - Remove the unused and questionably working 64 bit support"

* tag 'regmap-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: Fix the type used for a bitmap pointer
  regmap: Remove dynamic allocation warnings for rbtree and maple
  regmap: rbtree: Use alloc_flags for memory allocations
  regmap: maple: Use alloc_flags for memory allocations
  regmap: Reject fast_io regmap configurations with RBTREE and MAPLE caches
  ALSA: hda: Use regcache_reg_cached() rather than open coding
  regmap: Provide test for regcache_reg_present()
  regmap: Let users check if a register is cached
  regmap: Provide user selectable option to enable regmap
  regmap: mmio: Remove unused 64-bit support code
  regmap: cache: Revert "Add 64-bit mode support"
  regmap: Revert "add 64-bit mode support" and Co.

Merge tag 'hsi-for-6.6' of git://git./linux/kernel/git/sre/linux-hsi

Pull HSI update from Sebastian Reichel:

- explicitly include correct DT includes

* tag 'hsi-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
hsi: omap_ssi: Explicitly include correct DT includes

Merge tag 'for-v6.6' of git://git./linux/kernel/git/sre/linux-power-supply

Pull power supply and reset updates from Sebastian Reichel:

- core: avoid duplicate hwmon device from thermal framework

- convert multiple drivers to devm_platform_ioremap_resource

- at91-reset: add sysfs interface to the power on reason

- misc small fixes and improvements

* tag 'for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
  power: supply: qcom_pmi8998_charger: fix charger status
  power: supply: qcom_pmi8998_charger: remove CHARGE_CONTROL_LIMIT_* props
  power: supply: qcom_pmi8998_charger: fix uninitialized variable
  power: reset: oxnas-restart: remove obsolete restart driver
  power: supply: core: Avoid duplicate hwmon device from thermal framework
  power: reset: ocelot: Convert to devm_platform_ioremap_resource()
  power: reset: msm: Convert to devm_platform_ioremap_resource()
  power: reset: gemini-poweroff: Convert to devm_platform_ioremap_resource()
  power: reset: brcm-kona: Convert to devm_platform_ioremap_resource()
  power: reset: at91-sama5d2_shdwc: Convert to devm_platform_ioremap_resource()
  power: reset: at91-poweroff: Convert to devm_platform_ioremap_resource()
  power: reset: at91-reset: add sysfs interface to the power on reason
  power: supply: bd99954: make read-only array sub_status_reg
  power: supply: bq24190: Considers FORCE_20PCT when getting IPRECHG
  power: Explicitly include correct DT includes

Merge tag 'auxdisplay-6.6' of https://github.com/ojeda/linux

Pull auxdisplay update from Miguel Ojeda:

- hd44780: move cursor home after clear display command

   The change allows to support displays like the NewHaven
   NHD-0220DZW-AG5 which has a non-standard controller.

* tag 'auxdisplay-6.6' of https://github.com/ojeda/linux:
  auxdisplay: hd44780: move cursor home after clear display command

Merge tag 'rust-6.6' of https://github.com/Rust-for-Linux/linux

Pull rust updates from Miguel Ojeda:
"In terms of lines, most changes this time are on the pinned-init API
  and infrastructure. While we have a Rust version upgrade, and thus a
  bunch of changes from the vendored 'alloc' crate as usual, this time
  those do not account for many lines.

  Toolchain and infrastructure:

   - Upgrade to Rust 1.71.1. This is the second such upgrade, which is a
     smaller jump compared to the last time.

     This version allows us to remove the '__rust_*' allocator functions
     -- the compiler now generates them as expected, thus now our
     'KernelAllocator' is used.

     It also introduces the 'offset_of!' macro in the standard library
     (as an unstable feature) which we will need soon. So far, we were
     using a declarative macro as a prerequisite in some not-yet-landed
     patch series, which did not support sub-fields (i.e. nested
     structs):

         #[repr(C)]
         struct S {
             a: u16,
             b: (u8, u8),
         }

         assert_eq!(offset_of!(S, b.1), 3);

   - Upgrade to bindgen 0.65.1. This is the first time we upgrade its
     version.

     Given it is a fairly big jump, it comes with a fair number of
     improvements/changes that affect us, such as a fix needed to
     support LLVM 16 as well as proper support for '__noreturn' C
     functions, which are now mapped to return the '!' type in Rust:

         void __noreturn f(void); // C
         pub fn f() -> !;         // Rust

   - 'scripts/rust_is_available.sh' improvements and fixes.

     This series takes care of all the issues known so far and adds a
     few new checks to cover for even more cases, plus adds some more
     help texts. All this together will hopefully make problematic
     setups easier to identify and to be solved by users building the
     kernel.

     In addition, it adds a test suite which covers all branches of the
     shell script, as well as tests for the issues found so far.

   - Support rust-analyzer for out-of-tree modules too.

   - Give 'cfg's to rust-analyzer for the 'core' and 'alloc' crates.

   - Drop 'scripts/is_rust_module.sh' since it is not needed anymore.

  Macros crate:

   - New 'paste!' proc macro.

     This macro is a more flexible version of 'concat_idents!': it
     allows the resulting identifier to be used to declare new items and
     it allows to transform the identifiers before concatenating them,
     e.g.

         let x_1 = 42;
         paste!(let [<x _2>] = [<x _1>];);
         assert!(x_1 == x_2);

     The macro is then used for several of the pinned-init API changes
     in this pull.

  Pinned-init API:

   - Make '#[pin_data]' compatible with conditional compilation of
     fields, allowing to write code like:

         #[pin_data]
         pub struct Foo {
             #[cfg(CONFIG_BAR)]
             a: Bar,
             #[cfg(not(CONFIG_BAR))]
             a: Baz,
         }

   - New '#[derive(Zeroable)]' proc macro for the 'Zeroable' trait,
     which allows 'unsafe' implementations for structs where every field
     implements the 'Zeroable' trait, e.g.:

         #[derive(Zeroable)]
         pub struct DriverData {
             id: i64,
             buf_ptr: *mut u8,
             len: usize,
         }

   - Add '..Zeroable::zeroed()' syntax to the 'pin_init!' macro for
     zeroing all other fields, e.g.:

         pin_init!(Buf {
             buf: [1; 64],
             ..Zeroable::zeroed()
         });

   - New '{,pin_}init_array_from_fn()' functions to create array
     initializers given a generator function, e.g.:

         let b: Box<[usize; 1_000]> = Box::init::<Error>(
             init_array_from_fn(|i| i)
         ).unwrap();

         assert_eq!(b.len(), 1_000);
         assert_eq!(b[123], 123);

   - New '{,pin_}chain' methods for '{,Pin}Init<T, E>' that allow to
     execute a closure on the value directly after initialization, e.g.:

         let foo = init!(Foo {
             buf <- init::zeroed()
         }).chain(|foo| {
             foo.setup();
             Ok(())
         });

   - Support arbitrary paths in init macros, instead of just identifiers
     and generic types.

   - Implement the 'Zeroable' trait for the 'UnsafeCell<T>' and
     'Opaque<T>' types.

   - Make initializer values inaccessible after initialization.

   - Make guards in the init macros hygienic.

  'allocator' module:

   - Use 'krealloc_aligned()' in 'KernelAllocator::alloc' preventing
     misaligned allocations when the Rust 1.71.1 upgrade is applied
     later in this pull.

     The equivalent fix for the previous compiler version (where
     'KernelAllocator' is not yet used) was merged into 6.5 already,
     which added the 'krealloc_aligned()' function used here.

   - Implement 'KernelAllocator::{realloc, alloc_zeroed}' for
     performance, using 'krealloc_aligned()' too, which forwards the
     call to the C API.

  'types' module:

   - Make 'Opaque' be '!Unpin', removing the need to add a
     'PhantomPinned' field to Rust structs that contain C structs which
     must not be moved.

   - Make 'Opaque' use 'UnsafeCell' as the outer type, rather than
     inner.

  Documentation:

   - Suggest obtaining the source code of the Rust's 'core' library
     using the tarball instead of the repository.

  MAINTAINERS:

   - Andreas and Alice, from Samsung and Google respectively, are
     joining as reviewers of the "RUST" entry.

  As well as a few other minor changes and cleanups"

* tag 'rust-6.6' of https://github.com/Rust-for-Linux/linux: (42 commits)
  rust: init: update expanded macro explanation
  rust: init: add `{pin_}chain` functions to `{Pin}Init<T, E>`
  rust: init: make `PinInit<T, E>` a supertrait of `Init<T, E>`
  rust: init: implement `Zeroable` for `UnsafeCell<T>` and `Opaque<T>`
  rust: init: add support for arbitrary paths in init macros
  rust: init: add functions to create array initializers
  rust: init: add `..Zeroable::zeroed()` syntax for zeroing all missing fields
  rust: init: make initializer values inaccessible after initializing
  rust: init: wrap type checking struct initializers in a closure
  rust: init: make guards in the init macros hygienic
  rust: add derive macro for `Zeroable`
  rust: init: make `#[pin_data]` compatible with conditional compilation of fields
  rust: init: consolidate init macros
  docs: rust: clarify what 'rustup override' does
  docs: rust: update instructions for obtaining 'core' source
  docs: rust: add command line to rust-analyzer section
  scripts: generate_rust_analyzer: provide `cfg`s for `core` and `alloc`
  rust: bindgen: upgrade to 0.65.1
  rust: enable `no_mangle_with_rust_abi` Clippy lint
  rust: upgrade to Rust 1.71.1
  ...

Merge tag 'tpmdd-v6.6' of git://git./linux/kernel/git/jarkko/linux-tpmdd

Pull tpm updates from Jarkko Sakkinen:

- Restrict linking of keys to .ima and .evm keyrings based on
   digitalSignature attribute in the certificate

- PowerVM: load machine owner keys into the .machine [1] keyring

- PowerVM: load module signing keys into the secondary trusted keyring
   (keys blessed by the vendor)

- tpm_tis_spi: half-duplex transfer mode

- tpm_tis: retry corrupted transfers

- Apply revocation list (.mokx) to an all system keyrings (e.g.
   .machine keyring)

Link: https://blogs.oracle.com/linux/post/the-machine-keyring
* tag 'tpmdd-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
  certs: Reference revocation list for all keyrings
  tpm/tpm_tis_synquacer: Use module_platform_driver macro to simplify the code
  tpm: remove redundant variable len
  tpm_tis: Resend command to recover from data transfer errors
  tpm_tis: Use responseRetry to recover from data transfer errors
  tpm_tis: Move CRC check to generic send routine
  tpm_tis_spi: Add hardware wait polling
  KEYS: Replace all non-returning strlcpy with strscpy
  integrity: PowerVM support for loading third party code signing keys
  integrity: PowerVM machine keyring enablement
  integrity: check whether imputed trust is enabled
  integrity: remove global variable from machine_keyring.c
  integrity: ignore keys failing CA restrictions on non-UEFI platform
  integrity: PowerVM support for loading CA keys on machine keyring
  integrity: Enforce digitalSignature usage in the ima and evm keyrings
  KEYS: DigitalSignature link restriction
  tpm_tis: Revert "tpm_tis: Disable interrupts on ThinkPad T490s"

Merge git://git./linux/kernel/git/netdev/net

Merge in late fixes to prepare for the 6.6 net-next PR.

No conflicts.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge tag 'linux-kselftest-nolibc-6.6-rc1' of git://git./linux/kernel/git/shuah/linux-kselftest

Pull nolibc updates from Shuah Khan:
"Nolibc:
   - improved portability by removing build errors with -ENOSYS
   - added syscall6() on MIPS to support pselect6() and mmap()
   - added setvbuf(), rmdir(), pipe(), pipe2()
   - add support for ppc/ppc64
   - environ is no longer optional
   - fixed frame pointer issues at -O0
   - dropped sys_stat() in favor of sys_statx()
   - centralized _start_c() to remove lots of asm code
   - switched size_t to __SIZE_TYPE__

  Selftests:
   - improved status reporting (success/warning/failure counts, path to
     log file)
   - various code cleanups (indent, unused variables, ...)
   - more consistent test numbering
   - enabled compiler warnings
   - dropped unreliable chmod_net test
   - improved reliability (create /dev/zero & /tmp, rely less on /proc)
   - new tests (brk/sbrk/mmap/munmap)
   - improved compatibility with musl
   - new run-nolibc-test target to build and run natively
   - new run-libc-test target to build and run against native libc
   - made the cmdline parser more reliable against boolean arguments
   - dropped dependency on memfd for vfprintf() test
   - nolibc-test is no longer stripped
   - added support for extending ARCH via XARCH

  Other:
   - add Thomas as co-maintainer"

* tag 'linux-kselftest-nolibc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (103 commits)
  tools/nolibc: avoid undesired casts in the __sysret() macro
  tools/nolibc: keep brk(), sbrk(), mmap() away from __sysret()
  tools/nolibc: silence ppc64 compile warnings
  selftests/nolibc: libc-test: use HOSTCC instead of CC
  tools/nolibc: stackprotector.h: make __stack_chk_init static
  selftests/nolibc: allow report with existing test log
  selftests/nolibc: add test support for ppc64
  selftests/nolibc: add test support for ppc64le
  selftests/nolibc: add test support for ppc
  selftests/nolibc: add XARCH and ARCH mapping support
  tools/nolibc: add support for powerpc64
  tools/nolibc: add support for powerpc
  MAINTAINERS: nolibc: add myself as co-maintainer
  selftests/nolibc: enable compiler warnings
  selftests/nolibc: don't strip nolibc-test
  selftests/nolibc: prevent out of bounds access in expect_vfprintf
  selftests/nolibc: use correct return type for read() and write()
  selftests/nolibc: avoid sign-compare warnings
  selftests/nolibc: avoid unused parameter warnings
  selftests/nolibc: make functions static if possible
  ...

Merge tag 'linux-kselftest-kunit-6.6-rc1' of git://git./linux/kernel/git/shuah/linux-kselftest

Pull kunit updates from Shuah Khan:

- add support for running Rust documentation tests as KUnit tests

- make init, str, sync, types doctests compilable/testable

- add support for attributes API which include speed, modules
   attributes, ability to filter and report attributes

- add support for marking tests slow using attributes API

- add attributes API documentation

- fix a wild-memory-access bug in kunit_filter_suites() and a possible
   memory leak in kunit_filter_suites()

- add support for counting number of test suites in a module, list
   action to kunit test modules, and test filtering on module tests

* tag 'linux-kselftest-kunit-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (25 commits)
  kunit: fix struct kunit_attr header
  kunit: replace KUNIT_TRIGGER_STATIC_STUB maro with KUNIT_STATIC_STUB_REDIRECT
  kunit: Allow kunit test modules to use test filtering
  kunit: Make 'list' action available to kunit test modules
  kunit: Report the count of test suites in a module
  kunit: fix uninitialized variables bug in attributes filtering
  kunit: fix possible memory leak in kunit_filter_suites()
  kunit: fix wild-memory-access bug in kunit_filter_suites()
  kunit: Add documentation of KUnit test attributes
  kunit: add tests for filtering attributes
  kunit: time: Mark test as slow using test attributes
  kunit: memcpy: Mark tests as slow using test attributes
  kunit: tool: Add command line interface to filter and report attributes
  kunit: Add ability to filter attributes
  kunit: Add module attribute
  kunit: Add speed attribute
  kunit: Add test attributes API structure
  MAINTAINERS: add Rust KUnit files to the KUnit entry
  rust: support running Rust documentation tests as KUnit ones
  rust: types: make doctests compilable/testable
  ...

Merge tag 'linux-kselftest-next-6.6-rc1' of git://git./linux/kernel/git/shuah/linux-kselftest

Pull Kselftest updates from Shuah Khan:
"A mix of fixes, enhancements, and new tests. Bulk of the changes
  enhance and fix rseq and resctrl tests.

  In addition, user_events, dmabuf-heaps and perf_events are added to
  default kselftest build and test coverage. A futex test fix, enhance
  prctl test coverage, and minor fixes are included in this update"

* tag 'linux-kselftest-next-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (32 commits)
  selftests: cachestat: use proper syscall number macro
  selftests: cachestat: properly link in librt
  selftests/futex: Order calls to futex_lock_pi
  selftests: Hook more tests into the build infrastructure
  selftests/user_events: Reenable build
  selftests/filesystems: Add six consecutive 'x' characters to mktemp
  selftests/rseq: Use rseq_unqual_scalar_typeof in macros
  selftests/rseq: Fix arm64 buggy load-acquire/store-release macros
  selftests/rseq: Implement rseq_unqual_scalar_typeof
  selftests/rseq: Fix CID_ID typo in Makefile
  selftests:prctl: add set-process-name to .gitignore
  selftests:prctl: Fix make clean override warning
  selftests/resctrl: Remove test type checks from cat_val()
  selftests/resctrl: Pass the real number of tests to show_cache_info()
  selftests/resctrl: Move CAT/CMT test global vars to function they are used in
  selftests/resctrl: Don't use variable argument list for ->setup()
  selftests/resctrl: Don't pass test name to fill_buf
  selftests/resctrl: Improve parameter consistency in fill_buf
  selftests/resctrl: Remove unnecessary startptr global from fill_buf
  selftests/resctrl: Remove "malloc_and_init_memory" param from run_fill_buf()
  ...

Merge tag 'thermal-6.6-rc1' of git://git./linux/kernel/git/rafael/linux-pm

Pull thermal control updates from Rafael Wysocki:
"These rework the Intel DTS IOSF and the ACPI thermal drivers to pass
  tables of generic trip point structures to the core during
  initialization and make some requisite modifications in the thermal
  core, fix a few issues elsewhere and clean up code.

  This includes changes that are present in the ACPI updates too,
  because they involve both ACPI and the thermal core. The list of
  specific changes below is limited to thermal control, however.

  Specifics:

   - Make the ACPI thermal driver use its own Notify() handler (Michal
     Wilczynski)

   - Rework the ACPI thermal driver to use a table of generic trip point
     structures on top of the internal representation of trip points and
     remove thermal zone callbacks that are not necessary any more from
     that driver (Rafael Wysocki)

   - Fix a few issues in the Intel DTS IOSF thermal driver, clean up
     code in it and make it pass tables of generic trip point structures
     to the core during thermal zone registration (Rafael Wysocki)

   - Drop a redundant check from the Intel DTS IOSF thermal driver's
     "remove" routine (Zhang Rui)

   - Use module_platform_driver() to replace an open-coded counterpart
     of it in the int340x thermal driver (Yang Yingliang)

   - Fix possible uninitialized value access in __thermal_of_bind() and
     __thermal_of_unbind() (Peng Fan)

   - Make the int3400 driver use thermal zone device wrappers (Daniel
     Lezcano)

   - Remove redundant thermal zone state check from the int340x thermal
     driver (Daniel Lezcano)

   - Drop non-functional nocrt parameter from ACPI thermal (Mario
     Limonciello)

   - Explicitly include correct DT includes in the thermal core and
     drivers (Rob Herring)"

* tag 'thermal-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: intel: intel_soc_dts_iosf: Remove redundant check
  thermal: intel: int340x: simplify the code with module_platform_driver()
  thermal/of: Fix potential uninitialized value access
  thermal: intel: intel_soc_dts_iosf: Use struct thermal_trip
  thermal: intel: intel_soc_dts_iosf: Rework critical trip setup
  thermal: intel: intel_soc_dts_iosf: Add helper for resetting trip points
  thermal: intel: intel_soc_dts_iosf: Change initialization ordering
  thermal: intel: intel_soc_dts_iosf: Pass sensors to update_trip_temp()
  thermal: intel: intel_soc_dts_iosf: Untangle update_trip_temp()
  thermal: intel: intel_soc_dts_iosf: Always assume notification support
  thermal: intel: intel_soc_dts_iosf: Drop redundant symbol definition
  thermal: intel: intel_soc_dts_iosf: Always use 2 trips
  thermal: Explicitly include correct DT includes
  thermal/drivers/int340x: Do not check the thermal zone state
  thermal/drivers/int3400: Use thermal zone device wrappers

Merge tag 'pm-6.6-rc1' of git://git./linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
"These rework cpuidle governors to call tick_nohz_get_sleep_length()
  less often and fix one of them, rework hibernation to avoid storing
  pages filled with zeros in hibernation images, switch over some
  cpufreq drivers to use void remove callbacks, fix and clean up
  multiple cpufreq drivers, fix the devfreq core, update the cpupower
  utility and make other assorted improvements.

  Specifics:

   - Rework the menu and teo cpuidle governors to avoid calling
     tick_nohz_get_sleep_length(), which is likely to become quite
     expensive going forward, too often and improve making decisions
     regarding whether or not to stop the scheduler tick in the teo
     governor (Rafael Wysocki)

   - Improve the performance of cpufreq_stats_create_table() in some
     cases (Liao Chang)

   - Fix two issues in the amd-pstate-ut cpufreq driver (Swapnil Sapkal)

   - Use clamp() helper macro to improve the code readability in
     cpufreq_verify_within_limits() (Liao Chang)

   - Set stale CPU frequency to minimum in intel_pstate (Doug Smythies)

   - Migrate cpufreq drivers for various platforms to use void remove
     callback (Yangtao Li)

   - Add online/offline/exit hooks for Tegra driver (Sumit Gupta)

   - Explicitly include correct DT includes in cpufreq (Rob Herring)

   - Frequency domain updates for qcom-hw driver (Neil Armstrong)

   - Modify AMD pstate driver return the highest_perf value (Meng Li)

   - Generic cleanups for cppc, mediatek and powernow driver (Liao
     Chang, Konrad Dybcio)

   - Add more platforms to cpufreq-arm driver's blocklist
     (AngeloGioacchino Del Regno and Konrad Dybcio)

   - brcmstb-avs-cpufreq: Fix -Warray-bounds bug (Gustavo A. R. Silva)

   - Add device PM helpers to allow a device to remain powered-on during
     system-wide transitions (Ulf Hansson)

   - Rework hibernation memory snapshotting to avoid storing pages
     filled with zeros in hibernation image files (Brian Geffon)

   - Add check to make sure that CPU latency QoS constraints do not use
     negative values (Clive Lin)

   - Optimize rp->domains memory allocation in the Intel RAPL power
     capping driver (xiongxin)

   - Remove recursion while parsing zones in the arm_scmi power capping
     driver (Cristian Marussi)

   - Fix memory leak in devfreq_dev_release() (Boris Brezillon)

   - Rewrite devfreq_monitor_start() kerneldoc comment (Manivannan
     Sadhasivam)

   - Explicitly include correct DT includes in devfreq (Rob Herring)

   - Remove unsued pm_runtime_update_max_time_suspended() extern
     declaration (YueHaibing)

   - Add turbo-boost support to cpupower (Wyes Karny)

   - Add support for amd_pstate mode change to cpupower (Wyes Karny)

   - Fix 'cpupower idle_set' command to accept only numeric values of
     arguments (Likhitha Korrapati)

   - Clean up OPP code and add new frequency related APIs to it (Viresh
     Kumar, Manivannan Sadhasivam)

   - Convert ti cpufreq/opp bindings to json schema (Nishanth Menon)"

* tag 'pm-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (74 commits)
  cpufreq: tegra194: remove opp table in exit hook
  cpufreq: powernow-k8: Use related_cpus instead of cpus in driver.exit()
  cpufreq: tegra194: add online/offline hooks
  cpuidle: teo: Avoid unnecessary variable assignments
  cpufreq: qcom-cpufreq-hw: add support for 4 freq domains
  dt-bindings: cpufreq: qcom-hw: add a 4th frequency domain
  cpufreq: amd-pstate-ut: Fix kernel panic when loading the driver
  cpufreq: amd-pstate-ut: Remove module parameter access
  cpufreq: Use clamp() helper macro to improve the code readability
  PM: sleep: Add helpers to allow a device to remain powered-on
  PM: QoS: Add check to make sure CPU latency is non-negative
  PM: runtime: Remove unsued extern declaration of pm_runtime_update_max_time_suspended()
  cpufreq: intel_pstate: set stale CPU frequency to minimum
  cpufreq: stats: Improve the performance of cpufreq_stats_create_table()
  dt-bindings: cpufreq: Convert ti-cpufreq to json schema
  dt-bindings: opp: Convert ti-omap5-opp-supply to json schema
  OPP: Fix argument name in doc comment
  cpuidle: menu: Skip tick_nohz_get_sleep_length() call in some cases
  cpufreq: cppc: Set fie_disabled to FIE_DISABLED if fails to create kworker_fie
  cpufreq: cppc: cppc_cpufreq_get_rate() returns zero in all error cases.
  ...

Merge tag 'acpi-6.6-rc1' of git://git./linux/kernel/git/rafael/linux-pm

Pull ACPI updates from Rafael Wysocki:
"These include new ACPICA material, a rework of the ACPI thermal
  driver, a switch-over of the ACPI processor driver to using _OSC
  instead of (long deprecated) _PDC for CPU initialization, a rework of
  firmware notifications handling in several drivers, fixes and cleanups
  for suspend-to-idle handling on AMD systems, ACPI backlight driver
  updates and more.

  Specifics:

   - Update the ACPICA code in the kernel to upstream revision 20230628
     including the following changes:
      - Suppress a GCC 12 dangling-pointer warning (Philip Prindeville)
      - Reformat the ACPI_STATE_COMMON macro and its users (George Guo)
      - Replace the ternary operator with ACPI_MIN() (Jiangshan Yi)
      - Add support for _DSC as per ACPI 6.5 (Saket Dumbre)
      - Remove a duplicate macro from zephyr header (Najumon B.A)
      - Add data structures for GED and _EVT tracking (Jose Marinho)
      - Fix misspelled CDAT DSMAS define (Dave Jiang)
      - Simplify an error message in acpi_ds_result_push() (Christophe
        Jaillet)
      - Add a struct size macro related to SRAT (Dave Jiang)
      - Add AML_NO_OPERAND_RESOLVE flag to Timer (Abhishek Mainkar)
      - Add support for RISC-V external interrupt controllers in MADT
        (Sunil V L)
      - Add RHCT flags, CMO and MMU nodes (Sunil V L)
      - Change ACPICA version to 20230628 (Bob Moore)

   - Introduce new wrappers for ACPICA notify handler install/remove and
     convert multiple drivers to using their own Notify() handlers
     instead of the ACPI bus type .notify() slated for removal (Michal
     Wilczynski)

   - Add backlight=native DMI quirk for Apple iMac12,1 and iMac12,2
     (Hans de Goede)

   - Put ACPI video and its child devices explicitly into D0 on boot to
     avoid platform firmware confusion (Kai-Heng Feng)

   - Add backlight=native DMI quirk for Lenovo Ideapad Z470 (Jiri Slaby)

   - Support obtaining physical CPU ID from MADT on LoongArch (Bibo Mao)

   - Convert ACPI CPU initialization to using _OSC instead of _PDC that
     has been depreceted since 2018 and dropped from the specification
     in ACPI 6.5 (Michal Wilczynski, Rafael Wysocki)

   - Drop non-functional nocrt parameter from ACPI thermal (Mario
     Limonciello)

   - Clean up the ACPI thermal driver, rework the handling of firmware
     notifications in it and make it provide a table of generic trip
     point structures to the core during initialization (Rafael Wysocki)

   - Defer enumeration of devices with _DEP pointing to IVSC (Wentong
     Wu)

   - Install SystemCMOS address space handler for ACPI000E (TAD) to meet
     platform firmware expectations on some platforms (Zhang Rui)

   - Fix finding the generic error data in the ACPi extlog driver for
     compatibility with old and new firmware interface versions
     (Xiaochun Lee)

   - Remove assorted unused declarations of functions (Yue Haibing)

   - Move AMBA bus scan handling into arm64 specific directory (Sudeep
     Holla)

   - Fix and clean up suspend-to-idle interface for AMD systems (Mario
     Limonciello, Andy Shevchenko)

   - Fix string truncation warning in pnpacpi_add_device() (Sunil V L)"

* tag 'acpi-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (66 commits)
  ACPI: x86: s2idle: Add a function to get LPS0 constraint for a device
  ACPI: x86: s2idle: Add for_each_lpi_constraint() helper
  ACPI: x86: s2idle: Add more debugging for AMD constraints parsing
  ACPI: x86: s2idle: Fix a logic error parsing AMD constraints table
  ACPI: x86: s2idle: Catch multiple ACPI_TYPE_PACKAGE objects
  ACPI: x86: s2idle: Post-increment variables when getting constraints
  ACPI: Adjust #ifdef for *_lps0_dev use
  ACPI: TAD: Install SystemCMOS address space handler for ACPI000E
  ACPI: Remove assorted unused declarations of functions
  ACPI: extlog: Fix finding the generic error data for v3 structure
  PNP: ACPI: Fix string truncation warning
  ACPI: Remove unused extern declaration acpi_paddr_to_node()
  ACPI: video: Add backlight=native DMI quirk for Apple iMac12,1 and iMac12,2
  ACPI: video: Put ACPI video and its child devices into D0 on boot
  ACPI: processor: LoongArch: Get physical ID from MADT
  ACPI: scan: Defer enumeration of devices with a _DEP pointing to IVSC device
  ACPI: thermal: Eliminate code duplication from acpi_thermal_notify()
  ACPI: thermal: Drop unnecessary thermal zone callbacks
  ACPI: thermal: Rework thermal_get_trend()
  ACPI: thermal: Use trip point table to register thermal zones
  ...

Merge tag 'tag-chrome-platform-firmware-for-v6.6' of git://git./linux/kernel/git/chrome-platform/linux

Pull chrome platform firmware update from Tzung-Bi Shih:

- Add MAINTAINERS entry for chrome platform firmware

* tag 'tag-chrome-platform-firmware-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
MAINTAINERS: Add drivers/firmware/google/ entry

Merge tag 'tag-chrome-platform-for-v6.6' of git://git./linux/kernel/git/chrome-platform/linux

Pull chrome platform updates from Tzung-Bi Shih:
"Improvements:

  - Remove shutdown timeout on EC panic for offering the filesystem a
    chance to sync

  - Support official HID "GOOG0016" for ChromeOS ACPI

  Fixes:

  - Print hex string instead of using "%s" for ACPI_TYPE_BUFFER

  Misc:

  - Update MAINTAINERS"

* tag 'tag-chrome-platform-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
  platform/chrome: chromeos_acpi: print hex string for ACPI_TYPE_BUFFER
  platform/chrome: chromeos_acpi: support official HID GOOG0016
  platform/chrome: cros_ec_lpc: Remove EC panic shutdown timeout
  MAINTAINERS: update maintainers of chrome-platform

Merge tag 'for-linus-6.6-rc1-tag' of git://git./linux/kernel/git/xen/tip

Pull xen updates from Juergen Gross:

- a bunch of minor cleanups

- a patch adding irqfd support for virtio backends running as user
   daemon supporting Xen guests

* tag 'for-linus-6.6-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen: privcmd: Add support for irqfd
  xen/xenbus: Avoid a lockdep warning when adding a watch
  xen: Fix one kernel-doc comment
  xen: xenbus: Use helper function IS_ERR_OR_NULL()
  xen: Switch to use kmemdup() helper
  xen-pciback: Remove unused function declarations
  x86/xen: Make virt_to_pfn() a static inline
  xen: remove a confusing comment on auto-translated guest I/O
  xen/evtchn: Remove unused function declaration xen_set_affinity_evtchn()

Merge tag 'arm64-upstream' of git://git./linux/kernel/git/arm64/linux

Pull arm64 updates from Will Deacon:
"I think we have a bit less than usual on the architecture side, but
  that's somewhat balanced out by a large crop of perf/PMU driver
  updates and extensions to our selftests.

  CPU features and system registers:

   - Advertise hinted conditional branch support (FEAT_HBC) to userspace

   - Avoid false positive "SANITY CHECK" warning when xCR registers
     differ outside of the length field

  Documentation:

   - Fix macro name typo in SME documentation

  Entry code:

   - Unmask exceptions earlier on the system call entry path

  Memory management:

   - Don't bother clearing PTE_RDONLY for dirty ptes in pte_wrprotect()
     and pte_modify()

  Perf and PMU drivers:

   - Initial support for Coresight TRBE devices on ACPI systems (the
     coresight driver changes will come later)

   - Fix hw_breakpoint single-stepping when called from bpf

   - Fixes for DDR PMU on i.MX8MP SoC

   - Add NUMA-awareness to Hisilicon PCIe PMU driver

   - Fix locking dependency issue in Arm DMC620 PMU driver

   - Workaround Hisilicon erratum 162001900 in the SMMUv3 PMU driver

   - Add support for Arm CMN-700 r3 parts to the CMN PMU driver

   - Add support for recent Arm Cortex CPU PMUs

   - Update Hisilicon PMU maintainers

  Selftests:

   - Add a bunch of new features to the hwcap test (JSCVT, PMULL, AES,
     SHA1, etc)

   - Fix SSVE test to leave streaming-mode after grabbing the signal
     context

   - Add new test for SVE vector-length changes with SME enabled

  Miscellaneous:

   - Allow compiler to warn on suspicious looking system register
     expressions

   - Work around SDEI firmware bug by aborting any running handlers on a
     kernel crash

   - Fix some harmless warnings when building with W=1

   - Remove some unused function declarations

   - Other minor fixes and cleanup"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (62 commits)
  drivers/perf: hisi: Update HiSilicon PMU maintainers
  arm_pmu: acpi: Add a representative platform device for TRBE
  arm_pmu: acpi: Refactor arm_spe_acpi_register_device()
  kselftest/arm64: Fix hwcaps selftest build
  hw_breakpoint: fix single-stepping when using bpf_overflow_handler
  arm64/sysreg: refactor deprecated strncpy
  kselftest/arm64: add jscvt feature to hwcap test
  kselftest/arm64: add pmull feature to hwcap test
  kselftest/arm64: add AES feature check to hwcap test
  kselftest/arm64: add SHA1 and related features to hwcap test
  arm64: sysreg: Generate C compiler warnings on {read,write}_sysreg_s arguments
  kselftest/arm64: build BTI tests in output directory
  perf/imx_ddr: don't enable counter0 if none of 4 counters are used
  perf/imx_ddr: speed up overflow frequency of cycle
  drivers/perf: hisi: Schedule perf session according to locality
  kselftest/arm64: fix a memleak in zt_regs_run()
  perf/arm-dmc620: Fix dmc620_pmu_irqs_lock/cpu_hotplug_lock circular lock dependency
  perf/smmuv3: Add MODULE_ALIAS for module auto loading
  perf/smmuv3: Enable HiSilicon Erratum 162001900 quirk for HIP08/09
  kselftest/arm64: Size sycall-abi buffers for the actual maximum VL
  ...

Merge tag 'm68k-for-v6.6-tag1' of git://git./linux/kernel/git/geert/linux-m68k

Pull m68k updates from Geert Uytterhoeven:

- Remove <asm/export.h>

- Miscellaneous W=1 fixes

- defconfig updates

* tag 'm68k-for-v6.6-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  zorro: Include zorro.h in names.c
  m68k: Add memcmp() declaration
  m68k: Define __div64_32() to avoid a warning
  m68k: Remove <asm/export.h>
  m68k: Replace #include <asm/export.h> with #include <linux/export.h>
  m68k: defconfig: Update defconfigs for v6.5-rc1

Merge tag 's390-6.6-1' of git://git./linux/kernel/git/s390/linux

Pull s390 updates from Heiko Carstens:

- Add vfio-ap support to pass-through crypto devices to secure
   execution guests

- Add API ordinal 6 support to zcrypt_ep11misc device drive, which is
   required to handle key generate and key derive (e.g. secure key to
   protected key) correctly

- Add missing secure/has_secure sysfs files for the case where it is
   not possible to figure where a system has been booted from. Existing
   user space relies on that these files are always present

- Fix DCSS block device driver list corruption, caused by incorrect
   error handling

- Convert virt_to_pfn() and pfn_to_virt() from defines to static inline
   functions to enforce type checking

- Cleanups, improvements, and minor fixes to the kernel mapping setup

- Fix various virtual vs physical address confusions

- Move pfault code to separate file, since it has nothing to do with
   regular fault handling

- Move s390 documentation to Documentation/arch/ like it has been done
   for other architectures already

- Add HAVE_FUNCTION_GRAPH_RETVAL support

- Factor out the s390_hypfs filesystem and add a new config option for
   it. The filesystem is deprecated and as soon as all users are gone it
   can be removed some time in the not so near future

- Remove support for old CEX2 and CEX3 crypto cards from zcrypt device
   driver

- Add support for user-defined certificates: receive user-defined
   certificates with a diagnose call and provide them via 'cert_store'
   keyring to user space

- Couple of other small fixes and improvements all over the place

* tag 's390-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (66 commits)
  s390/pci: use builtin_misc_device macro to simplify the code
  s390/vfio-ap: make sure nib is shared
  KVM: s390: export kvm_s390_pv*_is_protected functions
  s390/uv: export uv_pin_shared for direct usage
  s390/vfio-ap: check for TAPQ response codes 0x35 and 0x36
  s390/vfio-ap: handle queue state change in progress on reset
  s390/vfio-ap: use work struct to verify queue reset
  s390/vfio-ap: store entire AP queue status word with the queue object
  s390/vfio-ap: remove upper limit on wait for queue reset to complete
  s390/vfio-ap: allow deconfigured queue to be passed through to a guest
  s390/vfio-ap: wait for response code 05 to clear on queue reset
  s390/vfio-ap: clean up irq resources if possible
  s390/vfio-ap: no need to check the 'E' and 'I' bits in APQSW after TAPQ
  s390/ipl: refactor deprecated strncpy
  s390/ipl: fix virtual vs physical address confusion
  s390/zcrypt_ep11misc: support API ordinal 6 with empty pin-blob
  s390/paes: fix PKEY_TYPE_EP11_AES handling for secure keyblobs
  s390/pkey: fix PKEY_TYPE_EP11_AES handling for sysfs attributes
  s390/pkey: fix PKEY_TYPE_EP11_AES handling in PKEY_VERIFYKEY2 IOCTL
  s390/pkey: fix PKEY_TYPE_EP11_AES handling in PKEY_KBLOB2PROTK[23]
  ...

Merge tag 'x86-cleanups-2023-08-28' of git://git./linux/kernel/git/tip/tip

Pull misc x86 cleanups from Ingo Molnar:
"The following commit deserves special mention:

   22dc02f81cddd Revert "sched/fair: Move unused stub functions to header"

  This is in x86/cleanups, because the revert is a re-application of a
  number of cleanups that got removed inadvertedly"

[ This also effectively undoes the amd_check_microcode() microcode
  declaration change I had done in my microcode loader merge in commit
  42a7f6e3ffe0 ("Merge tag 'x86_microcode_for_v6.6_rc1' [...]").

  I picked the declaration change by Arnd from this branch instead,
  which put it in <asm/processor.h> instead of <asm/microcode.h> like I
  had done in my merge resolution   - Linus ]

* tag 'x86-cleanups-2023-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/platform/uv: Refactor code using deprecated strncpy() interface to use strscpy()
  x86/hpet: Refactor code using deprecated strncpy() interface to use strscpy()
  x86/platform/uv: Refactor code using deprecated strcpy()/strncpy() interfaces to use strscpy()
  x86/qspinlock-paravirt: Fix missing-prototype warning
  x86/paravirt: Silence unused native_pv_lock_init() function warning
  x86/alternative: Add a __alt_reloc_selftest() prototype
  x86/purgatory: Include header for warn() declaration
  x86/asm: Avoid unneeded __div64_32 function definition
  Revert "sched/fair: Move unused stub functions to header"
  x86/apic: Hide unused safe_smp_processor_id() on 32-bit UP
  x86/cpu: Fix amd_check_microcode() declaration

Merge tag 'sched-core-2023-08-28' of git://git./linux/kernel/git/tip/tip

Pull scheduler updates from Ingo Molnar:

- The biggest change is introduction of a new iteration of the
   SCHED_FAIR interactivity code: the EEVDF ("Earliest Eligible Virtual
   Deadline First") scheduler

   EEVDF too is a virtual-time scheduler, with two parameters (weight
   and relative deadline), compared to CFS that had weight only. It
   completely reworks the base scheduler: placement, preemption, picking
   -- everything

   LWN.net, as usual, has a terrific writeup about EEVDF:

      https://lwn.net/Articles/925371/

   Preemption (both tick and wakeup) is driven by testing against a
   fresh pick. Because the tree is now effectively an interval tree, and
   the selection is no longer the 'leftmost' task, over-scheduling is
   less of a problem. A lot of the CFS heuristics are removed or
   replaced by more natural latency-space parameters & constructs

   In terms of expected performance regressions: we will and can fix
   everything where a 'good' workload misbehaves with the new scheduler,
   but EEVDF inevitably changes workload scheduling in a binary fashion,
   hopefully for the better in the overwhelming majority of cases, but
   in some cases it won't, especially in adversarial loads that got
   lucky with the previous code, such as some variants of hackbench. We
   are trying hard to err on the side of fixing all performance
   regressions, but we expect some inevitable post-release iterations of
   that process

- Improve load-balancing on hybrid x86 systems: enable cluster
   scheduling (again)

- Improve & fix bandwidth-scheduling on nohz systems

- Improve bandwidth-throttling

- Use lock guards to simplify and de-goto-ify control flow

- Misc improvements, cleanups and fixes

* tag 'sched-core-2023-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (43 commits)
  sched/eevdf/doc: Modify the documented knob to base_slice_ns as well
  sched/eevdf: Curb wakeup-preemption
  sched: Simplify sched_core_cpu_{starting,deactivate}()
  sched: Simplify try_steal_cookie()
  sched: Simplify sched_tick_remote()
  sched: Simplify sched_exec()
  sched: Simplify ttwu()
  sched: Simplify wake_up_if_idle()
  sched: Simplify: migrate_swap_stop()
  sched: Simplify sysctl_sched_uclamp_handler()
  sched: Simplify get_nohz_timer_target()
  sched/rt: sysctl_sched_rr_timeslice show default timeslice after reset
  sched/rt: Fix sysctl_sched_rr_timeslice intial value
  sched/fair: Block nohz tick_stop when cfs bandwidth in use
  sched, cgroup: Restore meaning to hierarchical_quota
  MAINTAINERS: Add Peter explicitly to the psi section
  sched/psi: Select KERNFS as needed
  sched/topology: Align group flags when removing degenerate domain
  sched/fair: remove util_est boosting
  sched/fair: Propagate enqueue flags into place_entity()
  ...

Merge tag 'perf-core-2023-08-28' of git://git./linux/kernel/git/tip/tip

Pull perf event updates from Ingo Molnar:

- AMD IBS improvements

- Intel PMU driver updates

- Extend core perf facilities & the ARM PMU driver to better handle ARM big.LITTLE events

- Micro-optimize software events and the ring-buffer code

- Misc cleanups & fixes

* tag 'perf-core-2023-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/uncore: Remove unnecessary ?: operator around pcibios_err_to_errno() call
  perf/x86/intel: Add Crestmont PMU
  x86/cpu: Update Hybrids
  x86/cpu: Fix Crestmont uarch
  x86/cpu: Fix Gracemont uarch
  perf: Remove unused extern declaration arch_perf_get_page_size()
  perf: Remove unused PERF_PMU_CAP_HETEROGENEOUS_CPUS capability
  arm_pmu: Remove unused PERF_PMU_CAP_HETEROGENEOUS_CPUS capability
  perf/x86: Remove unused PERF_PMU_CAP_HETEROGENEOUS_CPUS capability
  arm_pmu: Add PERF_PMU_CAP_EXTENDED_HW_TYPE capability
  perf/x86/ibs: Set mem_lvl_num, mem_remote and mem_hops for data_src
  perf/mem: Add PERF_MEM_LVLNUM_NA to PERF_MEM_NA
  perf/mem: Introduce PERF_MEM_LVLNUM_UNC
  perf/ring_buffer: Use local_try_cmpxchg in __perf_output_begin
  locking/arch: Avoid variable shadowing in local_try_cmpxchg()
  perf/core: Use local64_try_cmpxchg in perf_swevent_set_period
  perf/x86: Use local64_try_cmpxchg
  perf/amd: Prevent grouping of IBS events

Merge tag 'locking-core-2023-08-28' of git://git./linux/kernel/git/tip/tip

Pull locking update from Ingo Molnar:
"Simplify the locking self-tests via using the new <linux/cleanup.h>
facilities for lock guards"

* tag 'locking-core-2023-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
lockdep/selftests: Use SBRM APIs for wait context tests

Merge tag 'efi-next-for-v6.6' of git://git./linux/kernel/git/efi/efi

Pull EFI updates from Ard Biesheuvel:
"This primarily covers some cleanup work on the EFI runtime wrappers,
  which are shared between all EFI architectures except Itanium, and
  which provide some level of isolation to prevent faults occurring in
  the firmware code (which runs at the same privilege level as the
  kernel) from bringing down the system.

  Beyond that, there is a fix that did not make it into v6.5, and some
  doc fixes and dead code cleanup.

   - one bugfix for x86 mixed mode that did not make it into v6.5

   - first pass of cleanup for the EFI runtime wrappers

   - some cosmetic touchups"

* tag 'efi-next-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  x86/efistub: Fix PCI ROM preservation in mixed mode
  efi/runtime-wrappers: Clean up white space and add __init annotation
  acpi/prmt: Use EFI runtime sandbox to invoke PRM handlers
  efi/runtime-wrappers: Don't duplicate setup/teardown code
  efi/runtime-wrappers: Remove duplicated macro for service returning void
  efi/runtime-wrapper: Move workqueue manipulation out of line
  efi/runtime-wrappers: Use type safe encapsulation of call arguments
  efi/riscv: Move EFI runtime call setup/teardown helpers out of line
  efi/arm64: Move EFI runtime call setup/teardown helpers out of line
  efi/riscv: libstub: Fix comment about absolute relocation
  efi: memmap: Remove kernel-doc warnings
  efi: Remove unused extern declaration efi_lookup_mapped_addr()

Merge tag 'x86_microcode_for_v6.6_rc1' of git://git./linux/kernel/git/tip/tip

Pull x86 microcode loading updates from Borislav Petkov:
"The first, cleanup part of the microcode loader reorg tglx has been
  working on. The other part wasn't fully ready in time so it will
  follow on later.

  This part makes the loader core code as it is practically enabled on
  pretty much every baremetal machine so there's no need to have the
  Kconfig items.

  In addition, there are cleanups which prepare for future feature
  enablement"

* tag 'x86_microcode_for_v6.6_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/microcode: Remove remaining references to CONFIG_MICROCODE_AMD
  x86/microcode/intel: Remove pointless mutex
  x86/microcode/intel: Remove debug code
  x86/microcode: Move core specific defines to local header
  x86/microcode/intel: Rename get_datasize() since its used externally
  x86/microcode: Make reload_early_microcode() static
  x86/microcode: Include vendor headers into microcode.h
  x86/microcode/intel: Move microcode functions out of cpu/intel.c
  x86/microcode: Hide the config knob
  x86/mm: Remove unused microcode.h include
  x86/microcode: Remove microcode_mutex
  x86/microcode/AMD: Rip out static buffers

Merge tag 'x86_sev_for_v6.6_rc1' of git://git./linux/kernel/git/tip/tip

Pull x86 SEV updates from Borislav Petkov:

- Handle the case where the beginning virtual address of the address
   range whose SEV encryption status needs to change, is not page
   aligned so that callers which round up the number of pages to be
   decrypted, would mark a trailing page as decrypted and thus cause
   corruption during live migration.

- Return an error from the #VC handler on AMD SEV-* guests when the
   debug registers swapping is enabled as a DR7 access should not happen
   then - that register is guest/host switched.

* tag 'x86_sev_for_v6.6_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/sev: Make enc_dec_hypercall() accept a size instead of npages
  x86/sev: Do not handle #VC for DR7 read/write

Merge tag 'ras_core_for_v6.6_rc1' of git://git./linux/kernel/git/tip/tip

Pull x86 RAS updates from Borislav Petkov:

- Add a quirk for AMD Zen machines where Instruction Fetch unit poison
   consumption MCEs are not delivered synchronously but still within the
   same context, which can lead to erroneously increased error severity
   and unneeded kernel panics

- Do not log errors caught by polling shared MCA banks as they
   materialize as duplicated error records otherwise

* tag 'ras_core_for_v6.6_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/MCE: Always save CS register on AMD Zen IF Poison errors
  x86/mce: Prevent duplicate error records

Merge tag 'x86_misc_for_v6.6_rc1' of git://git./linux/kernel/git/tip/tip

Pull misc x86 updates from Borislav Petkov:

- Add PCI device IDs for a new AMD family 0x1a CPUs and use them in the
   respective drivers

- Update HPE Superdome Flex maintainers list

* tag 'x86_misc_for_v6.6_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/uv: Update HPE Superdome Flex Maintainers
  EDAC/amd64: Add support for AMD family 1Ah models 00h-1Fh and 40h-4Fh
  hwmon: (k10temp) Add thermal support for AMD Family 1Ah-based models
  x86/amd_nb: Add PCI IDs for AMD Family 1Ah-based models