drm/xe: Use DRM_GPUVM_RESV_PROTECTED for gpuvm

Use DRM_GPUVM_RESV_PROTECTED to use corse-grained locking for the
evict and external object list.
Since we are already holding the relevant RESV locks, for now at least,
we don't need the fine-grained locking.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231212100144.6833-3-thomas.hellstrom@linux.intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Use DRM GPUVM helpers for external- and evicted objects

Adapt to the DRM_GPUVM helpers moving removing a lot of complicated
driver-specific code.

For now this uses fine-grained locking for the evict list and external
object list, which may incur a slight performance penalty in some
situations.

v2:
- Don't lock all bos and validate on LR exec submissions (Matthew Brost)
- Add some kerneldoc

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231212100144.6833-2-thomas.hellstrom@linux.intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Fix lockdep warning in xe_force_wake calls

Use spin_lock_irqsave, spin_unlock_irqrestore

Fix for below:
[13994.811263] ========================================================
[13994.811295] WARNING: possible irq lock inversion dependency detected
[13994.811326] 6.6.0-rc3-xe #2 Tainted: G     U
[13994.811358] --------------------------------------------------------
[13994.811388] swapper/0/0 just changed the state of lock:
[13994.811416] ffff895c7e044db8 (&cpuctx_lock){-...}-{2:2}, at:
__perf_event_read+0xb7/0x3a0
[13994.811494] but this lock took another, HARDIRQ-unsafe lock in the
past:
[13994.811528]  (&fw->lock){+.+.}-{2:2}
[13994.811544]

               and interrupts could create inverse lock ordering between
them.

[13994.811606]
               other info that might help us debug this:
[13994.811636]  Possible interrupt unsafe locking scenario:

[13994.811667]        CPU0                    CPU1
[13994.811691]        ----                    ----
[13994.811715]   lock(&fw->lock);
[13994.811744]                                local_irq_disable();
[13994.811773]                                lock(&cpuctx_lock);
[13994.811810]                                lock(&fw->lock);
[13994.811846]   <Interrupt>
[13994.811865]     lock(&cpuctx_lock);
[13994.811895]
                *** DEADLOCK ***

v2: Use spin_lock in atomic context and spin_lock_irq in a non atomic
context (Matthew Brost)

v3: just use spin_lock_irqsave/restore

Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Check skip_guc_pc before disabling gucrc

Also, use the new C6 helper instead of duplicating that code.

v2: Check skip flag at the beginning of the function (Rodrigo)

Fixes: 975e4a3795d4 ("drm/xe: Manually setup C6 when skip_guc_pc is set")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Use NULL PTEs as scratch PTEs

Currently scratch PTEs are write-enabled and points to a single scratch
page. This has the side effect that buggy applications with out-of-bounds
memory accesses may not notice the bad access since what's written may
be read back.

Instead use NULL PTEs as scratch PTEs. These always return 0 when reading,
and writing has no effect. As a slight benefit, we can also use huge NULL
PTEs.

One drawback pointed out is that debugging may be hampered since previously
when inspecting the content of the scratch page, it might be possible to
detect writes to out-of-bound addresses and possibly also
from where the out-of-bounds address originated. However since the scratch
page-table structure is kept, it will be easy to add back the single
RW-enabled scratch page under a debug define if needed.

Also update the kerneldoc accordingly and move the function to create the
scratch page-tables from xe_pt.c to xe_pt.h since it is accessing
vm structure internals and this also makes it possible to make it static.

v2:
- Don't try to encode scratch PTEs larger than 1GiB.
- Move xe_pt_create_scratch(), Update kerneldoc.
v3:
- Rebase.

Cc: Brian Welty <brian.welty@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com> #for general direction.
Reviewed-by: Brian Welty <brian.welty@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231209151843.7903-3-thomas.hellstrom@linux.intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Restrict huge PTEs to 1GiB

Add a define for the highest level for which we can encode a huge PTE,
and use it for page-table building. Also update an assert that checks that
we don't try to encode for larger sizes.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Brian Welty <brian.welty@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231209151843.7903-2-thomas.hellstrom@linux.intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Add frequency throttle reasons sysfs attributes

Add throttle reasons sysfs attributes under a separate directory.

/device/tile<n>/gt<n>/freq0/throttle
|- reason_pl1
|- reason_pl2
|- reason_pl4
|- reason_prochot
|- reason_ratl
|- reason_vr_tdc
|- reason_vr_thermalert
|- status

v2: Remove unnecessary headers and clean-up action (Riana)

Signed-off-by: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Reviewed-by: Riana Tauro <riana.tauro@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Create a xe_gt_freq component for raw management and sysfs

Goals of this new xe_gt_freq component:
1. Detach sysfs controls and raw freq management from GuC SLPC.
2. Create a directory that could later be aligned with devfreq.
3. Encapsulate all the freq control in a single directory. Although
   we only have one freq domain per GT, already start with a numbered
   freq0 directory so it could be expanded in the future if multiple
   domains or PLL are needed.

Note: Although in the goal #1, the raw freq management control is
mentioned, this patch only starts by the sysfs control. The RP freq
configuration and init freq selection are still under the guc_pc, but
should be moved to this component in a follow-up patch.

v2: - Add /tile# to the doc and remove unnecessary kobject_put (Riana)
    - s/ssize_t/int on some ret variables (Vinay)

Cc: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Cc: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Change the name of frequency sysfs attributes

Switching the names of frequency sysfs attrbutes to align with
required devfreq changes. The name changes are as below;

-freq_act -> act_freq
-freq_cur -> cur_freq
-freq_rpn -> rpn_freq
-freq_rpe -> rpe_freq
-freq_rp0 -> rp0_freq
-freq_min -> min_freq
-freq_max -> max_freq

Signed-off-by: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Reviewed-by: Riana Tauro <riana.tauro@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/vm: Avoid asid lookup if none allocated

The destroy path can and will get called for incomplete
vm objects on error paths, where the asid is not yet allocated.
This leads to lookup fail and assert triggered.

Fix this by not asserting of asid existence if vm never
got assigned one.

Cc: Ohad Sharabi <osharabi@habana.ai>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Rename info.supports_* to info.has_*

Rename supports_mmio_ext and supports_usm to use a has_ prefix so the
flags are grouped together. This settles on just one variant for
positive info matching ("has_") and one for negative ("skip_").

Also make sure the has_* flags are grouped together in xe_pci.c.

Reviewed-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20231205145235.2114761-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/kunit: Add test for LMTT operations

The LMTT variants are abstracted with xe_lmtt_ops. Make sure that
both 2L and ML ops implementations are correct.

Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://lore.kernel.org/r/20231128151507.1015-6-michal.wajdeczko@intel.com
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/kunit: Enable CONFIG_PCI_IOV in .kunitconfig

We will add kunit tests for the PF specific code that is by default
enabled only under CONFIG_PCI_IOV. Update our .kunitconfig to allow
running those test cases by our CI.

Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://lore.kernel.org/r/20231128151507.1015-5-michal.wajdeczko@intel.com
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/pf: Introduce Local Memory Translation Table

The Local Memory Translation Table (LMTT) provides additional
abstraction for Virtual Functions (VF) accessing device VRAM.

This code is based on prior work of Michal Winiarski.

In this patch we focus only on LMTT initialization. Remaining LMTT
functions will be used once we add a VF provisioning to the PF.

Bspec: 44117, 52404, 59314
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://lore.kernel.org/r/20231128151507.1015-4-michal.wajdeczko@intel.com
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Introduce SR-IOV logging macros

To simplify logging and help identify SR-IOV specific messages
define set of helper macros that will prefix messages based on
the current SR-IOV mode.

Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20231128151507.1015-3-michal.wajdeczko@intel.com
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Define DRM_XE_DEBUG_SRIOV config

We will be using extra logs during enabling of the SR-IOV features
or when adding support for new platforms. Define separate config
flag to keep that low level logs disabled if we're not debugging.

Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20231128151507.1015-2-michal.wajdeczko@intel.com
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Avoid any races around ccs_mode update

Ensure that there are no drm clients when changing CCS mode.
Allow exec_queue creation only with enabled CCS engines.

v2: Rebase

Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Allow userspace to configure CCS mode

Allow user to configure the CCS mode setting through a
'ccs_mode' sysfs interface. Also report the current
CCS mode configuration and number of compute slices
available through this interface.

v2: Rebase, make it platform agnostic
v3: Separte out num_cslices sysfs interface and make
    xe_gt_ccs_mode_sysfs_init() return void

Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Enable Fixed CCS mode setting

Disable dynamic HW load balancing of compute resource assignment
to engines and instead enabled fixed mode of mapping compute
resources to engines on all platforms with more than one compute
engine.

By default enable only one CCS engine with all compute slices
assigned to it. This is the desired configuration for common
workloads.

PVC platform supports only the fixed CCS mode (workaround 16016805146).

v2: Rebase, make it platform agnostic
v3: Minor code refactoring

Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/xe2: Add workaround 18032095049 and 16021639441

This workaround applies to graphics 20.04 on all engines.

Workaround has three parts :
1. Pipe flush before MI_ATOMIC - This part isn't relevant to Xe
   (at least not right now) since we don't use MI_ATOMIC anywhere
   in the kernel mode driver.
2. Memory-based interrupt masking - Memory-based interrupt processing
   isn't supported on physical functions, only virtual functions,
   according to bspec 60352. So this is probably only relevant once
   SRIOV support lands in the driver.
3. Disabling CSB/timestamp updates to the ghwsp and pphwsp - Workaround
   is added by this change.

The CSB reports to gHWSP and ppHWSP have been discussed as part
of a different topic on some internal threads and we've confirmed
that neither the KMD nor the GuC firmware use those for anything,
so disabling them is always "safe" and should have no functional
or performance impact on system operation.  The same is true for
the timestamp updates in the ppHWSP as well.  Given that, it might
make sense to just combine these two workarounds into a single
record (and single patch) and apply it on all steppings. Disabling
the reports for RCS on higher steppings doesn't have any kind of
negative impact and will simplify the overall situation.

V3(MattR):
  - Combine WA apply same WA for all engines, no performance impact
V2(MattR):
  - Mention detail in commit message
  - Reorder bit define
  - Improve bit naming
  - Remove workaround part which isnt relevant

Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/xe2: Add workaround 14019988906

This workaround applies to Graphics 20.04 as engine
workaround

V2(MattR):
 - Reorder bit define
 - Apply WA for RCS only

Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/huc: HuC authentication via GSC

HuC authentication via GSC is performed by submitting the appropriate
PXP packet to the GSC FW. This packet can trigger a "pending" reply from
the FW, so we need to handle that and resubmit. Note that the auth via
GSC can only be performed if the HuC has already been authenticated by
the GuC.

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Vivaik Balasubrawmanian <vivaik.balasubrawmanian@intel.com>
Reviewed-by: Vivaik Balasubrawmanian <vivaik.balasubrawmanian@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/huc: Prepare for 2-step HuC authentication

Starting on MTL, the HuC is authenticated twice, once via GuC (same as
with older integrated platforms) and once via GSC; the first
authentication allows the HuC to be used for clear-media workloads,
while the second one unlocks support for protected content.
Ahead of adding the authentication flow via GSC, this patch adds support
for differentiating the 2 auth steps and checking if they're complete.

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Vivaik Balasubrawmanian <vivaik.balasubrawmanian@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/kunit: Test WAs for MTL and LNL

Now that the kunit infra has proper support for GMD_ID platforms, add a
few variants of MTL and LNL.

v2: Remove bogus check for setting both media and graphics version in
    test (Matt Roper)

Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20231129232807.1499826-6-lucas.demarchi@intel.com
Link: https://lore.kernel.org/r/20231205133954.2089546-4-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/kunit: Add stub to read_gmdid

Currently it's not possible to test the WAs for platforms using gmdid
since they don't have the IP information on the descriptor struct. In
order to allow that, add a stub function for read_gmdid() that is
activated when the test executes, replacing the iomap and read of the
real register.

Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20231129232807.1499826-5-lucas.demarchi@intel.com
Link: https://lore.kernel.org/r/20231205133954.2089546-3-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/kunit: Move fake pci data to test-priv

Instead of passing as parameter to xe_pci_fake_device_init(), use
test->priv to pass parameters down the call stack. The main advantage is
that then the data is readily available on other functions by using
kunit_get_current_test().

This is a preparation to fix the initialization of fake devices when
they were supposed to be using GMD_ID.

Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20231129232807.1499826-4-lucas.demarchi@intel.com
Link: https://lore.kernel.org/r/20231205133954.2089546-2-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/kunit: Remove handling of XE_TEST_SUBPLATFORM_ANY

The only user passing XE_TEST_SUBPLATFORM_ANY is
xe_pci_fake_device_init_any(), but then the function would return
earlier when handling XE_TEST_PLATFORM_ANY. Platforms without a
subplatform use XE_SUBPLATFORM_NONE.

Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20231129232807.1499826-3-lucas.demarchi@intel.com
Link: https://lore.kernel.org/r/20231129232807.1499826-6-lucas.demarchi@intel.com
Link: https://lore.kernel.org/r/20231205133954.2089546-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Expand XE_REG_OPTION_MASKED documentation

Expand documentation and add an example to make clear this isn't about
generic masks in registers. Also, fix the doc regarding read operations:
the mask part has no effect on them.

Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20231205155820.2133813-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/uapi: Kill exec_queue_set_property

All the properties should be immutable and set upon exec_queue creation
using the existent extension. So, let's kill this useless and dangerous
uapi.

Cc: Francois Dugast <francois.dugast@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>

drm/xe: Remove unused extension definition

The vm_create ioctl function doesn't accept any extension.
Remove this left over.
A backward compatible change.

Cc: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/xe/uapi: Use LR abbrev for long-running vms

Currently we're using "compute mode" for long running VMs using
preempt-fences for memory management, and "fault mode" for long
running VMs using page faults.

Change this to use the terminology "long-running" abbreviated as LR for
long-running VMs. These VMs can then either be in preempt-fence mode or
fault mode. The user can force fault mode at creation time, but otherwise
the driver can choose to use fault- or preempt-fence mode for long-running
vms depending on the device capabilities. Initially unless fault-mode is
specified, the driver uses preempt-fence mode.

v2:
- Fix commit message wording and the documentation around
  CREATE_FLAG_LR_MODE and CREATE_FLAG_FAULT_MODE

Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/uapi: Move xe_exec after xe_exec_queue

Although the exec ioctl is a very important one, it makes no sense
to explain xe_exec before explaining the exec_queue. So, let's
move this down to help bring a better flow on the documentation
and code readability.

It is important to highlight that this patch is changing all
the ioctl numbers in a non-backward compatible way. However, we
are doing this final uapi clean-up before we submit our first
pull-request to be part of the upstream Kernel. Once we get
there, no other change like this will ever happen and all the
backward compatibility will be respected.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/xe/uapi: Fix various struct padding for 64b alignment

Let's respect Documentation/process/botching-up-ioctls.rst
and add the proper padding for a 64b alignment with all as
well as all the required checks and settings for the pads
and the reserved entries.

v2: Fix remaining holes and double check with pahole (Jose)
    Ensure with pahole that both 32b and 64b have exact same
    layout (Thomas)
    Do not set query's pad and reserved bits to zero since it
    is redundant and already done by kzalloc (Matt)

v3: Fix alignment after rebase (José Roberto de Souza)

v4: Fix pad check (Francois Dugast)

Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Francois Dugast <francois.dugast@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/xe/uapi: Add Tile ID information to the GT info query

As an information only. So Userspace can use this information
and be able to correlate different GTs.

Make API symmetric between Engine and GT info.

There's no need right now to include a tile_query entry
since there's no other information that we need from tile
that is not already exposed through different queries.

However, this could be added later if we have different Tile
information that could matter to userspace. But let's keep
the API ready for a direct reference to Tile ID based on
the GT entry.

Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/xe/uapi: Crystal Reference Clock updates

First of all, let's remove the duplication.
But also, let's rename it to remove the word 'frequency'
out of it. In general, the first thing people think of frequency
is the frequency in which the GTs are operating to execute the
GPU instructions.

While this frequency here is a crystal reference clock frequency
which is the base of everything else, and in this case of this
uAPI it is used to calculate a better and precise timestamp.

v2: (Suggested by Jose) Remove the engine_cs and keep the GT info one
since it might be useful for other SRIOV cases where the engine_cs
will be zeroed. So, grabbing from the GT_LIST should be cleaner.

v3: Keep comment on put_user() call (José Roberto de Souza)

Cc: Matt Roper <matthew.d.roper@intel.com>
Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Cc: Jose Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/xe/uapi: Kill tile_mask

It is currently unused, so by the rules it cannot go upstream.
Also there was the desire to convert that to align with the
engine_class_instance selection, but the consensus on that one
is to remain with the global gt_id. So we are keeping the gt_id
there, not converting to a generic sched_group and also killing
this tile_mask and only using the default behavior of 0 that is
to create a mapping / page_table entry on every tile, similar
to what i915.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/xe/uapi: Split xe_sync types from flags

Let's continue on the uapi clean-up with more splits
with stuff into their own exclusive fields instead of
reusing stuff.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/xe/uapi: Align on a common way to return arrays (engines)

The uAPI provides queries which return arrays of elements. As of now
the format used in the struct is different depending on which element
is queried. Fix this for engines by applying the pattern below:

        struct drm_xe_query_Xs {
           __u32 num_Xs;
           struct drm_xe_X Xs[];
           ...
        }

Instead of directly returning an array of struct
drm_xe_query_engine_info, a new struct drm_xe_query_engines is
introduced. It contains itself an array of struct drm_xe_engine
which holds the information about each engine.

v2: Use plural for struct drm_xe_query_engines as multiple engines
    are returned (José Roberto de Souza)

Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/uapi: Align on a common way to return arrays (gt)

The uAPI provides queries which return arrays of elements. As of now
the format used in the struct is different depending on which element
is queried. However, aligning on the new common pattern:

    struct drm_xe_query_Xs {
       __u32 num_Xs;
       struct drm_xe_X Xs[];
       ...
    }

... would mean bringing back the name "gts" which is avoided per commit
fca54ba12470 ("drm/xe/uapi: Rename gts to gt_list") so make an exception
for gt and leave gt_list. Also, this change removes "query" in the
name of struct drm_xe_query_gt as it is not returned from the query
IOCTL. There is no functional change.

v2: Leave gt_list (Matt Roper)

Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/uapi: Align on a common way to return arrays (memory regions)

The uAPI provides queries which return arrays of elements. As of now
the format used in the struct is different depending on which element
is queried. Fix this for memory regions by applying the pattern below:

    struct drm_xe_query_Xs {
       __u32 num_Xs;
       struct drm_xe_X Xs[];
       ...
    }

This removes "query" in the name of struct drm_xe_query_mem_region
as it is not returned from the query IOCTL. There is no functional
change.

v2: Only rename drm_xe_query_mem_region to drm_xe_mem_region
    (José Roberto de Souza)

v3: Rename usage to mem_regions in xe_query.c (José Roberto de Souza)

Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/uapi: Reject bo creation of unaligned size

For xe bo creation we request passing size which matches system or
vram minimum page alignment. This way we want to ensure userspace
is aware of region constraints and not aligned allocations will be
rejected returning EINVAL.

v2:
- Rebase, Update uAPI documentation. (Thomas)
v3:
- Adjust the dma-buf kunit test accordingly. (Thomas)
v4:
- Fixed rebase conflicts and updated commit message. (Francois)

Signed-off-by: Mauro Carvalho Chehab <mauro.chehab@linux.intel.com>
Signed-off-by: Zbigniew Kempczyński <zbigniew.kempczynski@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Make DRM_XE_DEVICE_QUERY_ENGINES future proof

We have at least 2 future features(OA and future media engines
capabilities) that will require Xe to provide more information about
engines to UMDs.

But this information should not just be added to
drm_xe_engine_class_instance for a couple of reasons:
- drm_xe_engine_class_instance is used as input to other structs/uAPIs
and those uAPIs don't care about any of these future new engine fields
- those new fields are useless information after initialization for
some UMDs, so it should not need to carry that around

So here my proposal is to make DRM_XE_DEVICE_QUERY_ENGINES return an
array of drm_xe_query_engine_info that contain
drm_xe_engine_class_instance and 3 u64s to be used for future features.

Reference OA:
https://patchwork.freedesktop.org/patch/558362/?series=121084&rev=6

v2: Reduce reserved[] to 3 u64 (Matthew Brost)

Cc: Francois Dugast <francois.dugast@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Rodrigo Rebased]
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/xe/uapi: Separate bo_create placement from flags

Although the flags are about the creation, the memory placement
of the BO deserves a proper dedicated field in the uapi.

Besides getting more clear, it also allows to remove the
'magic' shifts from the flags that was a concern during the
uapi reviews.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/xe: Extend drm_xe_vm_bind_op

The bind api is extensible but for a single bind op, there
is not a mechanism to extend. Add extensions field to
struct drm_xe_vm_bind_op.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Francois Dugast <francois.dugast@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Dominik Grzegorzek <dominik.grzegorzek@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: add some debug info for d3cold

From the CI logs we want to easily know if the machine is capable and
allowed to enter d3cold, and can therefore potentially trigger the
d3cold RPM suspend and resume path.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/guc: Split GuC params used for "hwconfig" and "post-hwconfig"

Move params that are not used for initial "hwconfig" load to
"post-hwconfig" phase.

Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/uc: Extract xe_uc_sanitize_reset

Earlier GuC load will require more fine-grained control over reset.
Extract it outside of xe_uc_init_hw.

Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/uc: Store firmware binary in system-memory backed BO

The firmware loading for GuC is about to be moved, and will happen much
earlier in the probe process, when local-memory is not yet available.
While this has the potential to make the firmware loading process
slower, this is only happening during probe and full device reset.
Since both are not hot-paths - store all UC-like firmware in system
memory.

Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/uc: Split xe_uc_fw_init

The function does a driver specific "request firmware" step that
includes validating the input, followed by wrapping the firmware binary
into a buffer object. Split it into smaller parts.

Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Add a helper for DRM device-lifetime BO create

A helper for managed BO allocations makes it possible to remove specific
"fini" actions and will simplify the following patches adding ability to
execute a release action for specific BO directly.

Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Reorder GGTT init to earlier point in probe

GuC will need to be loaded earlier during probe. Having functional GGTT
is one of the prerequisites.
Also rename xe_ggtt_init_noalloc to xe_ggtt_init_early to match the new
call site.

Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Move force_wake init to earlier point in probe

GuC will need to be loaded earlier during probe. And in order to load
GuC, being able to take the forcewake is going to be needed.

Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Move system memory management init to earlier point in probe

GuC will need to be loaded earlier during probe. And in order to load
GuC, we will need the ability to create system memory allocations.

Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Don't "peek" into GMD_ID

Now that MMIO init got moved to device early, we can use regular
xe_mmio_read helpers to get to GMD_ID register.

Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/device: Introduce xe_device_probe_early

SR-IOV VF doesn't have access to MMIO registers used to determine
graphics/media ID. It can however communicate with GuC.
Introduce xe_device_probe_early, which initializes enough HW to use
MMIO GuC communication.
This will allow both VF and PF/native driver to have unified probe
ordering.

Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Map the entire BAR0 and hold onto the initial mapping

Both MMIO registers and GGTT for root tile will need to be used earlier
during probe. Don't rely on tile count to compute the mapping size.
Further more, there's no need to remap after figuring out the real
resource size.

Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Introduce xe_tile_init_early and use at earlier point in probe

It also merges the GT (which is part of tile) initialization happening
at xe_info_init with allocating other per-tile data structures into a
common helper function.

Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Split xe_info_init

Parts of xe_info_init are only dealing with processing driver_data.
Extract it into xe_info_init_early to be able to use it earlier during
probe.

Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/dsb: DSB implementation for xe

Add xe specific DSB buffer handling methods.

v1: Initial version.
v2: Add null check after dynamic memory allocation of vma. [Uma]

Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/xe2: Add workaround 16020292621

Workaround applies to Graphics 20.04 as part of ring
submission

V4(MattR):
  - Rule for engine in oob WA not supported, add explicitly
V3(MattR):
  - Pass hwe and rename API name to hint end of ring work
  - Use existing RING_NOPID API
V2:
  - Marking this WA for 20.04 instead of 20.00

Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/xe2: Respond to TRTT faults as unsuccessful page fault

SW is not expected to handle TRTT faults and should report these as
unsuccessful page fault in the reply, such that HW can respond by
raising a CAT error.

Signed-off-by: Brian Welty <brian.welty@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Support device page faults on integrated platforms

Update xe_migrate_prepare_vm() to use the usm batch buffer even for
servicing device page faults on integrated platforms. And as we have
no VRAM on integrated platforms, device pagefault handler should not
attempt to migrate into VRAM.
LNL is first integrated platform to support device pagefaults.

Signed-off-by: Brian Welty <brian.welty@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Move xe_mmio_probe_tiles outside of MMIO setup

MMIO is going to be setup earlier during probe. Move xe_mmio_probe_tiles
outside of MMIO setup.

Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20231129214509.1174116-6-michal.winiarski@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Move xe_set_dma_info outside of MMIO setup

MMIO is going to be setup earlier during probe. Move xe_set_dma_info
outside of MMIO setup.

Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20231129214509.1174116-5-michal.winiarski@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/irq: Don't call pci_free_irq_vectors

For devres managed devices, pci_alloc_irq_vectors is also managed (see
pci_setup_msi_context for reference).
PCI device used by Xe is devres managed (it was enabled with
pcim_enable_device), which means that calls to pci_free_irq_vectors are
redundant and can be safely removed.

Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20231129214509.1174116-4-michal.winiarski@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Use managed pci_enable_device

Xe uses devres for most of its driver-lifetime resources, use it for pci
device as well.

Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20231129214509.1174116-3-michal.winiarski@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Skip calling drm_dev_put on probe error

DRM device used by Xe is managed, which means that final ref will be
dropped on driver detach.

Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20231129214509.1174116-2-michal.winiarski@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Fix header guard warning

Additional underscore in the header guard causes the build to fail with:

drivers/gpu/drm/xe/xe_hw_engine_class_sysfs.h:6:9: error: '_XE_ENGINE_CLASS_SYSFS_H_' is used as a header guard here, followed by #define of a different macro [-Werror,-Wheader-guard]

Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20231129214509.1174116-1-michal.winiarski@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: rename bypass_mtcfg to skip_mtcfg

Per device, set this flag to access the MTCFG register or to skip it.
This is done to standardise Xe driver naming if an access to any HW
should be avoided.

Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: add skip_pcode flag

Per device, set this flag to enable access to the PCODE uC or to skip it.

Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/mocs: update MOCS table for xe2

Looks like there were some changes at some point here for preferring L4
uncached for some of the indexes. Triple checked the PAT settings also,
but that looks all correct as per current BSpec.

BSpec: 71582
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Manually setup C6 when skip_guc_pc is set

Skip the init/start/stop GuC PC functions and toggle C6 using
register writes instead. Also request max possible frequency
as dynamic freq management is disabled.

v2: Fix compile warning

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Add skip_guc_pc flag

This flag can be used to disable GuC based power management. This
could be used for debug or comparison to host based C6.

v2: Fix missing definition

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Rename xe_gt_idle_sysfs to xe_gt_idle

Prep this file to contain C6 toggling as well instead
of just sysfs related stuff.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/doc: Include documentation about xe_assert()

Our xe_assert() macros are well documented.
Include that in master documentation.

Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20231115112921.1905-1-michal.wajdeczko@intel.com
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/guc: Include only required GuC ABI headers

On i915 we were adding new GuC ABI headers directly to guc_fwif.h
file since we were replacing old definitions from that file.

On xe driver we could do more and better by including ABI headers
only in files that need those definitions.

Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/741
Cc: Jani Nikula <jani.nikula@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20231128203203.1147-3-michal.wajdeczko@intel.com
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/guc: Remove obsolete GuC CTB documentation

Refer to already described CTB Descriptor and CTB HXG Message.

Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20231128203203.1147-2-michal.wajdeczko@intel.com
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/guc: Drop ancient GuC CTB definitions

Those definitions were applicable for old GuC firmwares only.

Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/741
Link: https://lore.kernel.org/r/20231128203203.1147-1-michal.wajdeczko@intel.com
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: explicitly set GGTT access for GuC DMA

Confirmed with hardware that setting GGTT memory access for GuC
firmware loading is correct for all platforms and required for
new platforms going forward.

Signed-off-by: Fei Yang <fei.yang@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20231122204501.1353325-2-fei.yang@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/uapi: support pat_index selection with vm_bind

Allow userspace to directly control the pat_index for a given vm
binding. This should allow directly controlling the coherency, caching
behaviour, compression and potentially other stuff in the future for the
ppGTT binding.

The exact meaning behind the pat_index is very platform specific (see
BSpec or PRMs) but effectively maps to some predefined memory
attributes. From the KMD pov we only care about the coherency that is
provided by the pat_index, which falls into either NONE, 1WAY or 2WAY.
The vm_bind coherency mode for the given pat_index needs to be at least
1way coherent when using cpu_caching with DRM_XE_GEM_CPU_CACHING_WB. For
platforms that lack the explicit coherency mode attribute, we treat
UC/WT/WC as NONE and WB as AT_LEAST_1WAY.

For userptr mappings we lack a corresponding gem object, so the expected
coherency mode is instead implicit and must fall into either 1WAY or
2WAY. Trying to use NONE will be rejected by the kernel. For imported
dma-buf (from a different device) the coherency mode is also implicit
and must also be either 1WAY or 2WAY.

v2:
  - Undefined coh_mode(pat_index) can now be treated as programmer
    error. (Matt Roper)
  - We now allow gem_create.coh_mode <= coh_mode(pat_index), rather than
    having to match exactly. This ensures imported dma-buf can always
    just use 1way (or even 2way), now that we also bundle 1way/2way into
    at_least_1way. We still require 1way/2way for external dma-buf, but
    the policy can now be the same for self-import, if desired.
  - Use u16 for pat_index in uapi. u32 is massive overkill. (José)
  - Move as much of the pat_index validation as we can into
    vm_bind_ioctl_check_args. (José)
v3 (Matt Roper):
  - Split the pte_encode() refactoring into separate patch.
v4:
  - Rebase
v5:
  - Check for and reject !coh_mode which would indicate hw reserved
    pat_index on xe2.
v6:
  - Rebase on removal of coh_mode from uapi. We just need to reject
    cpu_caching=wb + pat_index with coh_none.

Testcase: igt@xe_pat
Bspec: 45101, 44235 #xe
Bspec: 70552, 71582, 59400 #xe2
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Pallavi Mishra <pallavi.mishra@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Filip Hazubski <filip.hazubski@intel.com>
Cc: Carl Zhang <carl.zhang@intel.com>
Cc: Effie Yu <effie.yu@intel.com>
Cc: Zhengguo Xu <zhengguo.xu@intel.com>
Cc: Francois Dugast <francois.dugast@intel.com>
Tested-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Zhengguo Xu <zhengguo.xu@intel.com>
Acked-by: Bartosz Dunajski <bartosz.dunajski@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/pat: annotate pat_index with coherency mode

Future uapi needs to give userspace the ability to select the pat_index
for a given vm_bind. However we need to be able to extract the coherency
mode from the provided pat_index to ensure it's compatible with the
cpu_caching mode set at object creation. There are various security
reasons for why this matters.  However the pat_index itself is very
platform specific, so seems reasonable to annotate each platform
definition of the pat table.  On some older platforms there is no
explicit coherency mode, so we just pick whatever makes sense.

v2:
  - Simplify with COH_AT_LEAST_1_WAY
  - Add some kernel-doc
v3 (Matt Roper):
  - Some small tweaks
v4:
  - Rebase
v5:
  - Rebase on Xe2 PAT additions
v6:
  - Rebase on removal of coh_mode from uapi

Bspec: 45101, 44235 #xe
Bspec: 70552, 71582, 59400 #xe2
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Pallavi Mishra <pallavi.mishra@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Filip Hazubski <filip.hazubski@intel.com>
Cc: Carl Zhang <carl.zhang@intel.com>
Cc: Effie Yu <effie.yu@intel.com>
Cc: Zhengguo Xu <zhengguo.xu@intel.com>
Cc: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Pallavi Mishra <pallavi.mishra@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/uapi: Add support for CPU caching mode

Allow userspace to specify the CPU caching mode at object creation.
Modify gem create handler and introduce xe_bo_create_user to replace
xe_bo_create. In a later patch we will support setting the pat_index as
part of vm_bind, where expectation is that the coherency mode extracted
from the pat_index must be least 1way coherent if using cpu_caching=wb.

v2
  - s/smem_caching/smem_cpu_caching/ and
    s/XE_GEM_CACHING/XE_GEM_CPU_CACHING/. (Matt Roper)
  - Drop COH_2WAY and just use COH_NONE + COH_AT_LEAST_1WAY; KMD mostly
    just cares that zeroing/swap-in can't be bypassed with the given
    smem_caching mode. (Matt Roper)
  - Fix broken range check for coh_mode and smem_cpu_caching and also
    don't use constant value, but the already defined macros. (José)
  - Prefer switch statement for smem_cpu_caching -> ttm_caching. (José)
  - Add note in kernel-doc for dgpu and coherency modes for system
    memory. (José)
v3 (José):
  - Make sure to reject coh_mode == 0 for VRAM-only.
  - Also make sure to actually pass along the (start, end) for
    __xe_bo_create_locked.
v4
  - Drop UC caching mode. Can be added back if we need it. (Matt Roper)
  - s/smem_cpu_caching/cpu_caching. Idea is that VRAM is always WC, but
    that is currently implicit and KMD controlled. Make it explicit in
    the uapi with the limitation that it currently must be WC. For VRAM
    + SYS objects userspace must now select WC. (José)
  - Make sure to initialize bo_flags. (José)
v5
  - Make to align with the other uapi and prefix uapi constants with
    DRM_ (José)
v6:
  - Make it clear that zero cpu_caching is only allowed for kernel
    objects. (José)
v7: (Oak)
  - With all the changes from the original design, it looks we can
    further simplify here and drop the explicit coh_mode. We can just
    infer the coh_mode from the cpu_caching. i.e reject cpu_caching=wb +
    coh_none. It's one less thing for userspace to maintain so seems
    worth it.
v8:
  - Make sure to also update the kselftests.

Testcase: igt@xe_mmap@cpu-caching
Signed-off-by: Pallavi Mishra <pallavi.mishra@intel.com>
Co-developed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Filip Hazubski <filip.hazubski@intel.com>
Cc: Carl Zhang <carl.zhang@intel.com>
Cc: Effie Yu <effie.yu@intel.com>
Cc: Zhengguo Xu <zhengguo.xu@intel.com>
Cc: Francois Dugast <francois.dugast@intel.com>
Cc: Oak Zeng <oak.zeng@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Zhengguo Xu <zhengguo.xu@intel.com>
Acked-by: Bartosz Dunajski <bartosz.dunajski@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/kunit: Return number of iterated devices

In xe_call_for_each_device() we are already counting number of
iterated devices. Lets make that available to the caller too.
We will use that functionality in upcoming patches.

Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20231115115816.1993-1-michal.wajdeczko@intel.com
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: fix mem_access for early lrc generation

We spawn some hw queues during device probe to generate the default LRC
for every engine type, however the queue destruction step is typically
async. Queue destruction needs to do stuff like GuC context deregister
which requires GuC CT, which in turn requires an active mem_access ref.
The caller during probe is meant to hold the mem_access token, however
due to the async destruction it might have already been dropped if we
are unlucky.

Similar to how we already handle migrate VMs for which there is no
mem_access ref, fix this by keeping the callers token alive, releasing
it only when destroying the queue. We can treat a NULL vm as indication
that we need to grab our own extra ref.

Fixes the following splat sometimes seen during load:

[ 1682.899930] WARNING: CPU: 1 PID: 8642 at drivers/gpu/drm/xe/xe_device.c:537 xe_device_assert_mem_access+0x27/0x30 [xe]
[ 1682.900209] CPU: 1 PID: 8642 Comm: kworker/u24:97 Tainted: G     U  W   E    N 6.6.0-rc3+ #6
[ 1682.900214] Workqueue: submit_wq xe_sched_process_msg_work [xe]
[ 1682.900303] RIP: 0010:xe_device_assert_mem_access+0x27/0x30 [xe]
[ 1682.900388] Code: 90 90 90 66 0f 1f 00 0f 1f 44 00 00 53 48 89 fb e8 1e 6c 03 00 48 85 c0 74 06 5b c3 cc cc cc cc 8b 83 28 23 00 00 85 c0 75 f0 <0f> 0b 5b c3 cc cc cc cc 90 90 90 90 90 90 90 90 90 90 90 90 90 90
[ 1682.900390] RSP: 0018:ffffc900021cfb68 EFLAGS: 00010246
[ 1682.900394] RAX: 0000000000000000 RBX: ffff8886a96d8000 RCX: 0000000000000000
[ 1682.900396] RDX: 0000000000000001 RSI: ffff8886a6311a00 RDI: ffff8886a96d8000
[ 1682.900398] RBP: ffffc900021cfcc0 R08: 0000000000000001 R09: 0000000000000000
[ 1682.900400] R10: ffffc900021cfcd0 R11: 0000000000000002 R12: 0000000000000004
[ 1682.900402] R13: 0000000000000000 R14: ffff8886a6311990 R15: ffffc900021cfd74
[ 1682.900405] FS:  0000000000000000(0000) GS:ffff888829880000(0000) knlGS:0000000000000000
[ 1682.900407] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1682.900409] CR2: 000055f70bad3fb0 CR3: 000000025243a004 CR4: 00000000003706e0
[ 1682.900412] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1682.900413] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 1682.900415] Call Trace:
[ 1682.900418]  <TASK>
[ 1682.900420]  ? xe_device_assert_mem_access+0x27/0x30 [xe]
[ 1682.900504]  ? __warn+0x85/0x170
[ 1682.900510]  ? xe_device_assert_mem_access+0x27/0x30 [xe]
[ 1682.900596]  ? report_bug+0x171/0x1a0
[ 1682.900604]  ? handle_bug+0x3c/0x80
[ 1682.900608]  ? exc_invalid_op+0x17/0x70
[ 1682.900612]  ? asm_exc_invalid_op+0x1a/0x20
[ 1682.900621]  ? xe_device_assert_mem_access+0x27/0x30 [xe]
[ 1682.900706]  ? xe_device_assert_mem_access+0x12/0x30 [xe]
[ 1682.900790]  guc_ct_send_locked+0xb9/0x1550 [xe]
[ 1682.900882]  ? lock_acquire+0xca/0x2b0
[ 1682.900885]  ? guc_ct_send+0x3c/0x1a0 [xe]
[ 1682.900977]  ? lock_is_held_type+0x9b/0x110
[ 1682.900984]  ? __mutex_lock+0xc0/0xb90
[ 1682.900989]  ? __pfx___drm_printfn_info+0x10/0x10
[ 1682.900999]  guc_ct_send+0x53/0x1a0 [xe]
[ 1682.901090]  ? __lock_acquire+0xf22/0x21b0
[ 1682.901097]  ? process_one_work+0x1a0/0x500
[ 1682.901109]  xe_guc_ct_send+0x19/0x50 [xe]
[ 1682.901202]  set_min_preemption_timeout+0x75/0xa0 [xe]
[ 1682.901294]  disable_scheduling_deregister+0x55/0x250 [xe]
[ 1682.901383]  ? xe_sched_process_msg_work+0x76/0xd0 [xe]
[ 1682.901467]  ? lock_release+0xc9/0x260
[ 1682.901474]  xe_sched_process_msg_work+0x82/0xd0 [xe]
[ 1682.901559]  process_one_work+0x20a/0x500

v2: Add the splat

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/gsc: Define GSC FW for MTL

We track GSC FW based on its compatibility version, which is what
determines the interface it supports.
Also add a modparam override like the ones for GuC and HuC.

v2: fix module param description (John)

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/gsc: Define GSCCS for MTL

Add the GSCCS to the media_xelpmp engine list. Note that since the
GSCCS is only used with the GSC FW, we can consider it disabled if we
don't have the FW available.

v2: mark GSCCS as allowed on the media IP in kunit tests

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/gsc: Query GSC compatibility version

The version is obtained via a dedicated MKHI GSC HECI command.
The compatibility version is what we want to match against for the GSC,
so we need to call the FW version checker after obtaining the version.

Since this is the first time we send a GSC HECI command via the GSCCS,
this patch also introduces common infrastructure to send such commands
to the GSC. Communication with the GSC FW is done via input/output
buffers, whose addresses are provided via a GSCCS command. The buffers
contain a generic header and a client-specific packet (e.g. PXP, HDCP);
the clients don't care about the header format and/or the GSCCS command
in the batch, they only care about their client-specific header. This
patch therefore introduces helpers that allow the callers to
automatically fill in the input header, submit the GSCCS job and decode
the output header, to make it so that the caller only needs to worry about
their client-specific input and output messages.

v3: squash of 2 separate patches ahead of merge, so that the common
functions and their first user are added at the same time

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.Com> #v1
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/gsc: Trigger a driver flr to cleanup the GSC on unload

GSC is only killed by an FLR, so we need to trigger one on unload to
make sure we stop it. This is because we assign a chunk of memory to
the GSC as part of the FW load, so we need to make sure it stops
using it when we release it to the system on driver unload. Note that
this is not a problem of the unload per-se, because the GSC will not
touch that memory unless there are requests for it coming from the
driver; therefore, no accesses will happen while Xe is not loaded,
but if we re-load the driver then the GSC might wake up and try to
access that old memory location again.

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/gsc: Implement WA 14015076503

When the GSC FW is loaded, we need to inform it when a GSCCS reset is
coming and then wait 200ms for it to get ready to process the reset.

v2: move WA code to GSC file, use variable in Makefile (John)

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <john.c.harrison@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/gsc: GSC FW load

The GSC FW must be copied in a 4MB stolen memory allocation, whose GGTT
address is then passed as a parameter to a dedicated load instruction
submitted via the GSC engine.

Since the GSC load is relatively slow (up to 250ms), we perform it
asynchronously via a worker. This requires us to make sure that the
worker has stopped before suspending/unloading.

Note that we can't yet use xe_migrate_copy for the copy because it
doesn't work with stolen memory right now, so we do a memcpy from the
CPU side instead.

v2: add comment about timeout value, fix GSC status checking
    before load (John)

Bspec: 65306, 65346
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/gsc: Parse GSC FW header

The GSC blob starts with a layout header, from which we can move to the
boot directory, which in turns allows us to find the CPD. The CPD uses
the same format as the one in the HuC binary, so we can re-use the same
parsing code to get to the manifest, which contains the release and
security versions of the FW.

v2: Fix comments in struct definition (John)

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/gsc: Introduce GSC FW

Add the basic definitions and init function. Same as HuC, GSC is only
supported on the media GT on MTL and newer platforms.
Note that the GSC requires submission resources which can't be allocated
during init (because we don't have the hwconfig yet), so it can't be
marked as loadable at the end of the init function. The allocation of
those resources will come in the patch that makes use of them to load
the FW.

v2: better comment, move num FWs define inside the enum (John)

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/uc: Rework uC version tracking

The GSC firmware, support for which is coming soon for Xe, has both a
release version (updated on every release) and a compatibility version
(update only on interface changes). The GuC has something similar, with
a global release version and a submission version (which is also known
as the VF compatibility version). The main difference is that for the
GuC we still want to check the driver requirement against the release
version, while for the GSC we'll need to check against the compatibility
version.
Instead of special casing the GSC, this patch reworks the FW logic so
that we store both versions at the uc_fw level for all binaries and we
allow checking against either of the versions. Initially, we'll use it
to support GSC, but the logic could be re-used to allow VFs to check
against the GuC compatibility version.
Note that the GSC version has 4 numbers (major, minor, hotfix, build),
so support for that has been added as part of the rework and will be
used in follow-up patches.

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Encapsulate all the module parameters

Encapsulate all the module parameters in one single global struct
variable. This also removes the extra xe_module.h from includes.

v2: naming consistency as suggested by Jani and Lucas
v3: fix checkpatch errors/warnings
v4: adding blank line after struct declaration

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Bommithi Sakeena <bommithi.sakeena@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/xe2: Add workaround 14020013138

This workaround applies to Xe2_LPG A0

V3:
  - Apply rule RENDER class
V2(Matt):
  - Apply WA in lrc context

Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/dg2: Drop Wa_22014600077

The workaround database has been updated to drop this workaround for all
DG2 variants.

Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20231127190332.4099519-2-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Sync MTL PCI IDs with i915

For Xe1 platforms, it's better to follow the way i915 adds the PCI IDs
to the header, so it's easier to catch up when there is an update. This
brings the same logic applied in commit 2e3c369f23a7 ("drm/i915/mtl:
Eliminate subplatforms") to the equivalent xe header.

The end result of this header for Xe1 platforms is now in sync with i915
as of commit 5032c607e886 ("drm/i915: ATS-M device ID update"). This can
be seen by

$ git show 5032c607e886:include/drm/i915_pciids.h > a.h
$ git diff --color-words  --no-index a.h include/drm/xe_pciids.h

Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20231121195209.802235-2-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Internally change the compute_mode and no_dma_fence mode naming

The name "compute_mode" can be confusing since compute uses either this
mode or fault_mode to achieve the long-running semantics, and compute_mode
can, moving forward, enable fault_mode under the hood to work around
hardware limitations.

Also the name no_dma_fence_mode really refers to what we elsewhere call
long-running mode and the mode contrary to what its name suggests allows
dma-fences as in-fences.

So in an attempt to be more consistent, rename
no_dma_fence_mode -> lr_mode
compute_mode      -> preempt_fence_mode

And adjust flags so that

preempt_fence_mode sets XE_VM_FLAG_LR_MODE
fault_mode sets XE_VM_FLAG_LR_MODE | XE_VM_FLAG_FAULT_MODE

v2:
- Fix a typo in the commit message (Oak Zeng)

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Oak Zeng <oak.zeng@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231127123349.23698-1-thomas.hellstrom@linux.intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/vm: Fix ASID XA usage

xa_alloc_cyclic() returns 1 on successful allocation, if wrapping occurs,
but the code incorrectly treats that as an error. Fix that.
Also, xa_alloc_cyclic() requires xa_init_flags(..., XA_FLAGS_ALLOC), so
fix that, and assuming we don't want a zero ASID, instead of using
XA_FLAGS_ALLOC1, adjust the xa limits at alloc_cyclic time.

v2:
- On CONFIG_DRM_XE_DEBUG, Initialize the cyclic ASID allocation in such a
  way that the next allocated ASID will be the maximum one, and the one
  following will cause an ASID wrap, (all to have CI test high ASIDs
  and ASID wraps).
v3:
- Stricter return value checking from xa_alloc_cyclic() (Matthew Auld)

Suggested-by: Ohad Sharabi <osharabi@habana.ai>
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/946
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Ohad Sharabi <osharabi@habana.ai> #v1
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231124153345.97385-5-thomas.hellstrom@linux.intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe/bo: Remove leftover trace_printk()

trace_printk() is not intended for production code. Remove it.

Suggested-by: Ohad Sharabi <osharabi@habana.ai>
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/946
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Ohad Sharabi <osharabi@habana.ai>
Link: https://patchwork.freedesktop.org/patch/msgid/20231122110359.4087-4-thomas.hellstrom@linux.intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>