pds_core: Fix documentation for pds_client_register

The documentation above pds_client_register states that it returns 0 on
success and negative on error. However, it actually returns a positive
client ID on success and negative on error. Fix the documentation to
state exactly that.

Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Link: https://lore.kernel.org/r/20230801165833.1622-1-brett.creeley@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: switchdev: Remove unused typedef switchdev_obj_dump_cb_t()

Commit 29ab586c3d83 ("net: switchdev: Remove bridge bypass support from switchdev")
leave this unused.

Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230801144209.27512-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

netlabel: Remove unused declaration netlbl_cipsov4_doi_free()

Since commit b1edeb102397 ("netlabel: Replace protocol/NetLabel linking with refrerence counts")
this declaration is unused and can be removed.

Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/20230801143453.24452-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ila: Remove unnecessary file net/ila.h

Commit 642c2c95585d ("ila: xlat changes") removed ila_xlat_outgoing()
and ila_xlat_incoming() functions, then this file became unnecessary.

Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230801143129.40652-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

udp: Remove unused function declaration udp_bpf_get_proto()

commit 8a59f9d1e3d4 ("sock: Introduce sk->sk_prot->psock_update_sk_prot()")
left behind this.

Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20230801133902.3660-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

cirrus: cs89x0: fix the return value handle and remove redundant dev_warn() for platform_get_irq()

There is no possible for platform_get_irq() to return 0
and the return value of platform_get_irq() is more sensible
to show the error reason.

And there is no need to call the dev_warn() function directly to print
a custom message when handling an error from platform_get_irq() function as
it is going to display an appropriate error message in case of a failure.

Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20230801133121.416319-1-ruanjinjie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: hellcreek: Replace bogus comment

Replace bogus comment about matching the latched timestamp to one of the
received frames. That comment is probably copied from mv88e6xxx and true for
these switches. However, the hellcreek switch is configured to insert the
timestamp directly into the PTP packets.

While here, remove the other comments regarding the list splicing and locking as
well, because it doesn't add any value.

Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20230801131647.84697-1-kurt@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

bnx2x: Remove unnecessary ternary operators

There are a little ternary operators, the true or false judgement
of which is unnecessary in C language semantics.

Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230801111928.300231-1-ruanjinjie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

octeontx2: Remove unnecessary ternary operators

There are a little ternary operators, the true or false judgement
of which is unnecessary in C language semantics. So remove it
to clean Code.

Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Sunil Goutham <sgoutham@marvell.com>
Link: https://lore.kernel.org/r/20230801112638.317149-1-ruanjinjie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: hisilicon: fix the return value handle and remove redundant netdev_err() for platform_get_irq()

There is no possible for platform_get_irq() to return 0
and the return value of platform_get_irq() is more sensible
to show the error reason.

And there is no need to call the netdev_err() function directly to print
a custom message when handling an error from platform_get_irq() function as
it is going to display an appropriate error message in case of a failure.

Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20230731073858.3633193-1-ruanjinjie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: Remove duplicated include in mac.c

./drivers/net/ethernet/freescale/fman/mac.c: linux/of_platform.h is included more than once.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=6039
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests/net: report rcv_mss in tcp_mmap

tcp_mmap tests TCP_ZEROCOPY_RECEIVE. If 0% of data is received using
mmap, this may be due to mss. Report rcv_mss to identify this cause.

Output of a run failed due to too small mss:

    received 32768 MB (0 % mmap'ed) in 8.40458 s, 32.7057 Gbit
      cpu usage user:0.027922 sys:8.21126, 251.44 usec per MB, 3252 c-switches, rcv_mss 1428

Output on a successful run:

    received 32768 MB (99.9507 % mmap'ed) in 4.69023 s, 58.6064 Gbit
      cpu usage user:0.029172 sys:2.56105, 79.0473 usec per MB, 57591 c-switches, rcv_mss 4096

Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'icssg-driver'

MD Danish Anwar says:

====================
Introduce ICSSG based ethernet Driver

The Programmable Real-time Unit and Industrial Communication Subsystem
Gigabit (PRU_ICSSG) is a low-latency microcontroller subsystem in the TI
SoCs. This subsystem is provided for the use cases like the implementation
of custom peripheral interfaces, offloading of tasks from the other
processor cores of the SoC, etc.

The subsystem includes many accelerators for data processing like
multiplier and multiplier-accumulator. It also has peripherals like
UART, MII/RGMII, MDIO, etc. Every ICSSG core includes two 32-bit
load/store RISC CPU cores called PRUs.

The above features allow it to be used for implementing custom firmware
based peripherals like ethernet.

This series adds the YAML documentation and the driver with basic EMAC
support for TI AM654 Silicon Rev 2 SoC with the PRU_ICSSG Sub-system.
running dual-EMAC firmware.
This currently supports basic EMAC with 1Gbps and 100Mbps link. 10M and
half-duplex modes are not yet supported because they require the support
of an IEP, which will be added later.
Advanced features like switch-dev and timestamping will be added later.

This is the v13 of the patch series [v1]. This version of the patchset
addresses comments made on v12.

There series doesn't have any dependency.

Changes from v12 to v13 :
*) Rebased the series on latest net-next.
*) Addressed Jakub's comments on ndo_xmit API. Now we will only stop queues
   based on occupancy not on dma errors.
*) Removed limiting the number of serviced packets to budget for Tx NAPI.
   Now Tx NAPI will keep servicing packets.
*) Removed netif_running() check when packet arrives.
*) Introduced prototypes of APIs in the same patch where these APIs are added.
   Dropped __maybe_unused tags as compiler only cares about prototypes
   existing, not whether actual callers are in place. Now prototypes of these
   APIs are present in the same patch where they are introduced but thes APIs
   are called later (in patch 6).

Changes from v11 to v12 :
*) Rebased the series on latest net-next.
*) Addressed Jakub's comments on ndo_xmit API.
*) Added hooks to .get_rmon_stats for the driver. Now tx / rx bucket size
   and frame counts per bucket will be fetched by ethtool_rmon_stats instead
   of ethtool -S.
*) Added __maybe_unused tags to unused config and classifier APIs in patch
   2,3 and 4. These tags are later removed in patch 6.

Changes from v10 to v11 :
*) Rebased the series on latest net-next.
*) Split the ICSSG driver introduction patch into 9 different patches as
   asked by Jakub.
*) Introduced new patch(patch 8/10) to dump Standard network interface
   staticstics via ndo_get_stats64. Now certain stats that are reported by
   ICSSG hardware and are also part of struct rtnl_link_stats64, will be
   reported by ndo_get_stats64. While other stats that are not part of the
   struct rtnl_link_stats64 will be reported by ethtool -S. These stats
   are not duplicated.

Changes from v9 to v10 :
*) Rebased the series on latest net-next.
*) Moved 'ndev prueth->emac[mac] == emac' assignment to the end of function
   prueth_netdev_init().
*) In unsupported phy_mode switch case instead of returning -EINVAL, store
   the error code in ret and 'goto free'

Changes from v8 to v9 :
*) Rebased the series on latest net-next.
*) Fixed smatch and sparse warnings as pointed by Simon.
*) Fixed leaky ndev in prueth_netdev_init() as asked by Simon.

Changes from v7 to v8 :
*) Rebased the series on 6.5-rc1.
*) Fixed few formattings.

Changes from v6 to v7 :
*) Added RB tag of Rob in patch 1 of this series.
*) Addressed Simon's comment on patch 2 of the series.
*) Rebased patchset on next-20230428 linux-next.

Changes from v5 to v6 :
*) Added RB tag of Andrew Lunn in patch 2 of this series.
*) Addressed Rob's comment on patch 1 of the series.
*) Rebased patchset on next-20230421 linux-next.

Changes from v4 to v5 :
*) Re-arranged properties section in ti,icssg-prueth.yaml file.
*) Added requirement for minimum one ethernet port.
*) Fixed some minor formatting errors as asked by Krzysztof.
*) Dropped SGMII mode from enum mii_mode as SGMII mode is not currently
   supported by the driver.
*) Added switch-case block to handle different phy modes by ICSSG driver.

Changes from v3 to v4 :
*) Addressed Krzysztof's comments and fixed dt_binding_check errors in
   patch 1/2.
*) Added interrupt-extended property in ethernet-ports properties section.
*) Fixed comments in file icssg_switch_map.h according to the Linux coding
   style in patch 2/2. Added Documentation of structures in patch 2/2.

Changes from v2 to v3 :
*) Addressed Rob and Krzysztof's comments on patch 1 of this series.
   Fixed indentation. Removed description and pinctrl section from
   ti,icssg-prueth.yaml file.
*) Addressed Krzysztof, Paolo, Randy, Andrew and Christophe's comments on
   patch 2 of this seires.
*) Fixed blanklines in Kconfig and Makefile. Changed structures to const
   as suggested by Krzysztof.
*) Fixed while loop logic in emac_tx_complete_packets() API as suggested
   by Paolo. Previously in the loop's last iteration 'budget' was 0 and
   napi_consume_skb would wrongly assume the caller is not in NAPI context
   Now, budget won't be zero in last iteration of loop.
*) Removed inline functions addr_to_da1() and addr_to_da0() as asked by
   Andrew.
*) Added dev_err_probe() instead of dev_err() as suggested by Christophe.
*) In ti,icssg-prueth.yaml file, in the patternProperties section of
   ethernet-ports, kept the port name as "port" instead of "ethernet-port"
   as all other drivers were using "port". Will change it if is compulsory
   to use "ethernet-port".
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: ti: icssg-prueth: Add Power management support

Add suspend / resume APIs to support power management in ICSSG ethernet
driver.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ti: icssg-prueth: Add ethtool ops for ICSSG Ethernet driver

Add icssg_ethtool.c file. This file will be used for dumping statistics
via ethtool for ICSSG ethernet driver.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ti: icssg-prueth: Add Standard network staticstics

Implement .ndo_get_stats64 to dump standard network interface
statistics for ICSSG ethernet driver.

Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ti: icssg-prueth: Add ICSSG Stats

Add icssg_stats.c to help dump, icssg related driver statistics.

ICSSG has hardware registers for providing statistics like total rx bytes,
total tx bytes, etc. These registers are of 32 bits and hence in case of 1G
link, they overflows in around 32 seconds. The behaviour of these registers
is such that they don't roll back to 0 after overflow but rather stay at
UINT_MAX.

These registers support a feature where the value written to them is
subtracted from the register. This feature can be utilized to fix the
overflowing of stats.

This solution uses a Workqueues based solution where a function gets
called before the registers overflow (every 25 seconds in 1G link, 25000
seconds in 100M link), this function saves the register
values in local variables and writes the last read value to the
register. So any update during the read will be taken care of.

Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ti: icssg-prueth: Add ICSSG ethernet driver

This is the Ethernet driver for TI AM654 Silicon rev. 2
with the ICSSG PRU Sub-system running dual-EMAC firmware.

The Programmable Real-time Unit and Industrial Communication Subsystem
Gigabit (PRU_ICSSG) is a low-latency microcontroller subsystem in the TI
SoCs. This subsystem is provided for the use cases like implementation of
custom peripheral interfaces, offloading of tasks from the other
processor cores of the SoC, etc.

Every ICSSG core has two Programmable Real-Time Unit(PRUs),
two auxiliary Real-Time Transfer Unit (RT_PRUs), and
two Transmit Real-Time Transfer Units (TX_PRUs). Each one of these runs
its own firmware. Every ICSSG core has two MII ports connect to these
PRUs and also a MDIO port.

The cores can run different firmwares to support different protocols and
features like switch-dev, timestamping, etc.

It uses System DMA to transfer and receive packets and
shared memory register emulation between the firmware and
driver for control and configuration.

This patch adds support for basic EMAC functionality with 1Gbps
and 100Mbps link speed. 10M and half duplex mode are not supported
currently as they require IEP, the support for which will be added later.
Support for switch-dev, timestamp, etc. will be added later
by subsequent patch series.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

dt-bindings: net: Add ICSSG Ethernet

Add a YAML binding document for the ICSSG Programmable real time unit
based Ethernet hardware. The ICSSG driver uses the PRU and PRUSS consumer
APIs to interface the PRUs and load/run the firmware for supporting
ethernet functionality.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ti: icssg-prueth: Add icssg queues APIs and macros

Add icssg_queue.c file. This file introduces macros and APIs related to
ICSSG queues. These will be used by ICSSG Ethernet driver.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ti: icssg-prueth: Add Firmware config and classification APIs.

Add icssg_config.h / .c and icssg_classifier.c files. These are firmware
configuration and classification related files. These will be used by
ICSSG ethernet driver.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ti: icssg-prueth: Add mii helper apis and macros

Add MII helper APIs and MACROs. These APIs and MACROs will be later used
by ICSSG Ethernet driver. Also introduce icssg_prueth.h which has
definition of prueth related structures.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ti: icssg-prueth: Add Firmware Interface for ICSSG Ethernet driver.

Add firmware interface related headers and macros for ICSSG Ethernet
driver. These macros will be later used by the ICSSG ethernet driver.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: mv88e6xxx: Add erratum 3.14 for 88E6390X and 88E6190X

Fixes XAUI/RXAUI lane alignment errors.
Issue causes dropped packets when trying to communicate over
fiber via SERDES lanes of port 9 and 10.
Errata document applies only to 88E6190X and 88E6390X devices.
Requires poking in undocumented registers.

Signed-off-by: Ante Knezic <ante.knezic@helmholz.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'tc-flower-SPI'

Ratheesh Kannoth says:

====================
Packet classify by matching against SPI

1.  net: flow_dissector: Add IPSEC dissector.
Flow dissector patch reads IPSEC headers (ESP or AH) header
from packet and retrieves the SPI header.

2. tc: flower: support for SPI.
TC control path changes to pass SPI field from userspace to
kernel.

3. tc: flower: Enable offload support IPSEC SPI field.
Next patch enables the HW support for classify offload for ESP/AH.
This patch enables the HW offload control.

4. octeontx2-pf: TC flower offload support for SPI field.
HW offload support for classification in octeontx2 driver.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

octeontx2-pf: TC flower offload support for SPI field

Driver support to offload TC flower rules which matches
against SPI field of IPSEC packets (AH/ESP).

Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tc: flower: Enable offload support IPSEC SPI field.

This patch enables offload for TC classifier
flower rules which matches against SPI field.

Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tc: flower: support for SPI

tc flower rules support to classify ESP/AH
packets matching SPI field.

Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: flow_dissector: Add IPSEC dissector

Support for dissecting IPSEC field SPI (which is
32bits in size) for ESP and AH packets.

Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'oxnas=dwmac-removal'

Neil Armstrong says:

====================
net: ethernet: dwmac: oxnas glue removal

With [1] removing MPCore SMP support, this makes the OX820 barely usable,
associated with a clear lack of maintainance, development and migration to
dt-schema it's clear that Linux support for OX810 and OX820 should be removed.

In addition, the OX810 hasn't been booted for years and isn't even present
in an ARM config file.

For the OX820, lack of USB and SATA support makes the platform not usable
in the current Linux support and relies on off-tree drivers hacked from the
vendor (defunct for years) sources.

The last users are in the OpenWRT distribution, and today's removal means
support will still be in stable 6.1 LTS kernel until end of 2026.

If someone wants to take over the development even with lack of SMP, I'll
be happy to hand off maintainance.

It has been a fun time adding support for this architecture, but it's time
to get over!

This patchset only removes net changes, and is derived from:
https://lore.kernel.org/r/20230630-topic-oxnas-upstream-remove-v2-0-fb6ab3dea87c@linaro.org

---
Changes in v3:
- Removed applied changes
- Added Andy's tags
- Reduced for net
- Link to v2: https://lore.kernel.org/r/20230630-topic-oxnas-upstream-remove-v2-0-fb6ab3dea87c@linaro.org

Changes in v2:
- s/maintainance/maintenance/
- added acked/review tags
- dropped already applied patches
- drop RFC
- Link to v1: https://lore.kernel.org/r/20230331-topic-oxnas-upstream-remove-v1-0-5bd58fd1dd1f@linaro.org
====================

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

dt-bindings: net: oxnas-dwmac: remove obsolete bindings

Due to lack of maintenance and stall of development for a few years now,
and since no new features will ever be added upstream, remove the
OX810 and OX820 dwmac glue.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: stmmac: dwmac-oxnas: remove obsolete dwmac glue driver

Due to lack of maintenance and stall of development for a few years now,
and since no new features will ever be added upstream, remove support
for OX810 and OX820 ethernet.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'selftests-mlxsw'

Petr Machata says:

====================
selftests: New selftests for out-of-order-operations patches in mlxsw

In the past, the mlxsw driver made the assumption that the user applies
configuration in a bottom-up manner. Thus netdevices needed to be added to
the bridge before IP addresses were configured on that bridge or SVI added
on top of it, because whatever happened before a netdevice was mlxsw upper
was generally ignored by mlxsw. Recently, several patch series were pushed
to introduce the bookkeeping and replays necessary to offload the full
state, not just the immediate configuration step.

In this patchset, introduce new selftests that directly exercise the out of
order code paths in mlxsw.

- Patch #1 adds new tests into the existing selftest router_bridge.sh.
- Patches #2-#5 add new generic selftests.
- Patches #6-#8 add new mlxsw-specific selftests.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: mlxsw: rif_bridge: Add a new selftest

This test verifies driver behavior with regards to creation of RIFs for a
bridge as LAGs are added or removed to/from it, and ports added or removed
to/from the LAG.

Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: mlxsw: rif_lag_vlan: Add a new selftest

This test verifies driver behavior with regards to creation of RIFs for LAG
VLAN uppers as ports are added or removed to/from the LAG.

Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: mlxsw: rif_lag: Add a new selftest

This test verifies driver behavior with regards to creation of RIFs for a
LAG as ports are added or removed to/from it.

Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: router_bridge_1d_lag: Add a new selftest

Add a selftest to verify that routing through several bridges works when
LAG VLANs are used instead of physical ports, and that routing through LAG
VLANs themselves works as physical ports are de/enslaved.

Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: router_bridge_lag: Add a new selftest

Add a selftest to verify that routing through a bridge works when LAG is
used instead of physical ports.

Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: router_bridge_vlan_upper: Add a new selftest

Add a selftest that verifies routing through VLAN bridge uppers.

Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: router_bridge_1d: Add a new selftest

Add a selftest to verify that routing through a 1d bridge works when VLAN
upper of a physical port is used instead of a physical port. Also verify
that when a port is attached to an already-configured bridge, the
configuration is applied.

Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: router_bridge: Add remastering tests

Add two tests to deslave a port from and reenslave to a bridge. This should
retain the ability of the system to forward traffic, but on an offloading
driver that is sensitive to ordering of operations, it might not.

The first test does this configuration in a way that relies on
vlan_default_pvid to assign the PVID. The second test disables that
autoconfiguration and configures PVID by hand in a separate step.

Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: stmmac: XGMAC support for mdio C22 addr > 3

For XGMAC versions < 2.2 number of supported mdio C22 addresses is
restricted to 3. From XGMAC version 2.2 there are no restrictions on
the C22 addresses, it supports all valid mdio addresses(0 to 31).

Signed-off-by: Rohan G Thomas <rohan.g.thomas@intel.com>
Acked-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'add-tja1120-support'

Radu Pirea says:

====================
Add TJA1120 support

This patch series got bigger than I expected. It cleans up the
next-c45-tja11xx driver and adds support for the TJA1120(1000BaseT1
automotive phy).

Master/slave custom implementation was replaced with the generic
implementation (genphy_c45_config_aneg/genphy_c45_read_status).

The TJA1120 and TJA1103 are a bit different when it comes to the PTP
interface. The timestamp read procedure was changed, some addresses were
changed and some bits were moved from one register to another. Adding
TJA1120 support was tricky, and I tried not to duplicate the code. If
something looks too hacky to you, I am open to suggestions.
====================

Link: https://lore.kernel.org/r/20230731091619.77961-1-radu-nicolae.pirea@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: phy: nxp-c45-tja11xx: reset PCS if the link goes down

During PTP testing on early TJA1120 engineering samples I observed that
if the link is lost and recovered, the tx timestamps will be randomly
lost. To avoid this HW issue, the PCS should be reset.

Resetting the PCS will break the link and we should reset the PCS on
LINK UP -> LINK DOWN transition, otherwise we will trigger and infinite
loop of LINK UP -> LINK DOWN events.

Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230731091619.77961-12-radu-nicolae.pirea@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: phy: nxp-c45-tja11xx: read ext trig ts on TJA1120

On TJA1120, the external trigger timestamp now has a VALID bit. This
changes the logic and we can't use the TJA1103 procedure.

For TJA1103, we can always read a valid timestamp from the registers,
compare the new timestamp with the old timestamp and, if they are not the
same, an event occurred. This logic cannot be applied for TJA1120 because
the timestamp is 0 if the VALID bit is not set.

Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Link: https://lore.kernel.org/r/20230731091619.77961-11-radu-nicolae.pirea@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: phy: nxp-c45-tja11xx: run cable test with the PHY in test mode

For TJA1120, the enable bit for cable test is not writable if the PHY is
not in test mode.

Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230731091619.77961-10-radu-nicolae.pirea@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: phy: nxp-c45-tja11xx: handle FUSA irq

TJA1120 and TJA1103 have a set of functional safety hardware tests
executed after every reset, and when the tests are done, the IRQ line is
asserted. For the moment, the purpose of these handlers is to acknowledge
the IRQ and not to check the FUSA tests status.

Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230731091619.77961-9-radu-nicolae.pirea@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: phy: nxp-c45-tja11xx: read egress ts on TJA1120

The egress timestamp FIFO/circular buffer work different on TJA1120 than
TJA1103.

For TJA1103 the new timestamp should be manually moved from the FIFO to
the hardware buffer before checking if the timestamp is valid.

For TJA1120 the hardware will move automatically the new timestamp
from the FIFO to the buffer and the user should check the valid bit, read
the timestamp and unlock the buffer by writing any of the buffer
registers(which are read only).

Another change for the TJA1120 is the behaviour of the EGR TS IRQ bit.
This bit was a self-clear bit for TJA1103, but now should be cleared
before reading the timestamp.

Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Link: https://lore.kernel.org/r/20230731091619.77961-8-radu-nicolae.pirea@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: phy: nxp-c45-tja11xx: enable LTC sampling on both ext_ts edges

The external trigger configuration for TJA1120 has changed. The PHY
supports sampling of the LTC on rising and on falling edge.

Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230731091619.77961-7-radu-nicolae.pirea@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: phy: nxp-c45-tja11xx: add TJA1120 support

Add TJA1120 driver entry and its driver_data.

Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230731091619.77961-6-radu-nicolae.pirea@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: phy: nxp-c45-tja11xx: use get_features

PHY_BASIC_T1_FEATURES are not the right features supported by TJA1103
anymore.
For example ethtool reports:
[root@alarm ~]# ethtool end0
Settings for end0:
        Supported ports: [ TP ]
        Supported link modes:   100baseT1/Full
                                10baseT1L/Full

10baseT1L/Full is not supported by TJA1103 and supported ports list is
not completed. The PHY also have a MII port.

genphy_c45_pma_read_abilities implementation can detect the PHY features
and they look like this.
[root@alarm ~]# ethtool end0
Settings for end0:
        Supported ports: [ TP    MII ]
        Supported link modes:   100baseT1/Full
        Supported pause frame use: Symmetric
        Supports auto-negotiation: No
        Supported FEC modes: Not reported
        Advertised link modes:  100baseT1/Full
        Advertised pause frame use: Symmetric
        Advertised auto-negotiation: No
        Advertised FEC modes: Not reported
        Speed: 100Mb/s
        Duplex: Full
        Auto-negotiation: off
        master-slave cfg: forced master
        master-slave status: master
        Port: Twisted Pair
        PHYAD: 1
        Transceiver: external
        MDI-X: Unknown
        Supports Wake-on: g
        Wake-on: d
        Link detected: yes
        SQI: 7/7

Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230731091619.77961-5-radu-nicolae.pirea@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: phy: nxp-c45-tja11xx: prepare the ground for TJA1120

Between TJA1120 and TJA1103 the hardware was improved, but some register
addresses were changed and some bit fields were moved from one register
to another.

Introduce the nxp_c45_reg_field structure and its associated functions to
abstract the differences between the PHYs.

Remove the defined bits and register addresses that are not common
between TJA1103 and TJA1120 and replace them with reg_fields and
register addresses from phydev->drv->driver_data.

Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Link: https://lore.kernel.org/r/20230731091619.77961-4-radu-nicolae.pirea@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: phy: nxp-c45-tja11xx: remove RX BIST frame counters

Remove RX BIST frame counters from the PHY statistics.
In production mode, these counters are always read as 0.

Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230731091619.77961-3-radu-nicolae.pirea@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: phy: nxp-c45-tja11xx: use phylib master/slave implementation

Remove the custom implementation of master/save setup and read status
and use genphy_c45_config_aneg and genphy_c45_read_status since phylib
has support for master/slave setup and master/slave status.

Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230731091619.77961-2-radu-nicolae.pirea@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'virtio_net-add-per-queue-interrupt-coalescing-support'

Gavin Li says:

====================
virtio_net: add per queue interrupt coalescing support

Currently, coalescing parameters are grouped for all transmit and receive
virtqueues. This patch series add support to set or get the parameters for
a specified virtqueue.

When the traffic between virtqueues is unbalanced, for example, one virtqueue
is busy and another virtqueue is idle, then it will be very useful to
control coalescing parameters at the virtqueue granularity.

Example command:
$ ethtool -Q eth5 queue_mask 0x1 --coalesce tx-packets 10
Would set max_packets=10 to VQ 1.
$ ethtool -Q eth5 queue_mask 0x1 --coalesce rx-packets 10
Would set max_packets=10 to VQ 0.
$ ethtool -Q eth5 queue_mask 0x1 --show-coalesce
 Queue: 0
 Adaptive RX: off  TX: off
 stats-block-usecs: 0
 sample-interval: 0
 pkt-rate-low: 0
 pkt-rate-high: 0

 rx-usecs: 222
 rx-frames: 0
 rx-usecs-irq: 0
 rx-frames-irq: 256

 tx-usecs: 222
 tx-frames: 0
 tx-usecs-irq: 0
 tx-frames-irq: 256

 rx-usecs-low: 0
 rx-frame-low: 0
 tx-usecs-low: 0
 tx-frame-low: 0

 rx-usecs-high: 0
 rx-frame-high: 0
 tx-usecs-high: 0
 tx-frame-high: 0
====================

Link: https://lore.kernel.org/r/20230731070656.96411-1-gavinl@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

virtio_net: enable per queue interrupt coalesce feature

Enable per queue interrupt coalesce feature bit in driver and validate its
dependency with control queue.

Signed-off-by: Gavin Li <gavinl@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20230731070656.96411-4-gavinl@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

virtio_net: support per queue interrupt coalesce command

Add interrupt_coalesce config in send_queue and receive_queue to cache user
config.

Send per virtqueue interrupt moderation config to underlying device in
order to have more efficient interrupt moderation and cpu utilization of
guest VM.

Additionally, address all the VQs when updating the global configuration,
as now the individual VQs configuration can diverge from the global
configuration.

Signed-off-by: Gavin Li <gavinl@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20230731070656.96411-3-gavinl@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

virtio_net: extract interrupt coalescing settings to a structure

Extract interrupt coalescing settings to a structure so that it could be
reused in other data structures.

Signed-off-by: Gavin Li <gavinl@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Heng Qi <hengqi@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230731070656.96411-2-gavinl@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

inet6: Remove unused function declaration udpv6_connect()

This is never implemented since the beginning of git history.

Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230731140437.37056-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: make sure we never create ifindex = 0

Instead of allocating from 1 use proper xa_init flag,
to protect ourselves from IDs wrapping back to 0.

Fixes: 759ab1edb56c ("net: store netdevs in an xarray")
Reported-by: Stephen Hemminger <stephen@networkplumber.org>
Link: https://lore.kernel.org/all/20230728162350.2a6d4979@hermes.local/
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230731171159.988962-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/macmace: Replace zero-length array with DECLARE_FLEX_ARRAY() helper

Since zero-length arrays are deprecated, we are replacing
them with C99 flexible-array members. As a result, instead
of declaring a zero-length array, use the new
DECLARE_FLEX_ARRAY() helper macro.

This fixes warnings such as:
./drivers/net/ethernet/apple/macmace.c:80:4-8: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays)

Signed-off-by: Atul Raut <rauji.raut@gmail.com>
Link: https://lore.kernel.org/r/20230730231442.15003-1-rauji.raut@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: qca8k: use dsa_for_each macro instead of for loop

Convert for loop to dsa_for_each macro to save some redundant write on
unconnected/unused port and tidy things up.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20230730074113.21889-5-ansuelsmth@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: dsa: qca8k: move qca8xxx hol fixup to separate function

Move qca8xxx hol fixup to separate function to tidy things up and to
permit using a more efficent loop in future patch.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20230730074113.21889-4-ansuelsmth@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: dsa: qca8k: limit user ports access to the first CPU port on setup

In preparation for multi-CPU support, set CPU port LOOKUP MEMBER outside
the port loop and setup the LOOKUP MEMBER mask for user ports only to
the first CPU port.

This is to handle flooding condition where every CPU port is set as
target and prevent packet duplication for unknown frames from user ports.

Secondary CPU port LOOKUP MEMBER mask will be setup later when
port_change_master will be implemented.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20230730074113.21889-3-ansuelsmth@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: dsa: qca8k: make learning configurable and keep off if standalone

Address learning should initially be turned off by the driver for port
operation in standalone mode, then the DSA core handles changes to it
via ds->ops->port_bridge_flags().

Currently this is not the case for qca8k where learning is enabled
unconditionally in qca8k_setup for every user port.

Handle ports configured in standalone mode by making the learning
configurable and not enabling it by default.

Implement .port_pre_bridge_flags and .port_bridge_flags dsa ops to
enable learning for bridge that request it and tweak
.port_stp_state_set to correctly disable learning when port is
configured in standalone mode.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20230730074113.21889-2-ansuelsmth@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: dsa: tag_qca: return early if dev is not found

Currently checksum is recalculated and dsa tag stripped even if we later
don't find the dev.

To improve code, exit early if we don't find the dev and skip additional
operation on the skb since it will be freed anyway.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20230730074113.21889-1-ansuelsmth@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge branch 'net-sched-improve-class-lifetime-handling'

Pedro Tammela says:

====================
net/sched: improve class lifetime handling

Valis says[0]:
============
Three classifiers (cls_fw, cls_u32 and cls_route) always copy
tcf_result struct into the new instance of the filter on update.

This causes a problem when updating a filter bound to a class,
as tcf_unbind_filter() is always called on the old instance in the
success path, decreasing filter_cnt of the still referenced class
and allowing it to be deleted, leading to a use-after-free.
============

Turns out these could have been spotted easily with proper warnings.
Improve the current class lifetime with wrappers that check for
overflow/underflow.

While at it add an extack for when a class in use is deleted.

[0] https://lore.kernel.org/all/20230721174856.3045-1-sec@valis.email/
====================

Link: https://lore.kernel.org/r/20230728153537.1865379-1-pctammela@mojatatu.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net/sched: sch_qfq: warn about class in use while deleting

Add extack to warn that delete was rejected because
the class is still in use

Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net/sched: sch_htb: warn about class in use while deleting

Add extack to warn that delete was rejected because
the class is still in use

Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net/sched: sch_hfsc: warn about class in use while deleting

Add extack to warn that delete was rejected because
the class is still in use

Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net/sched: sch_drr: warn about class in use while deleting

Add extack to warn that delete was rejected because
the class is still in use

Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net/sched: wrap open coded Qdics class filter counter

The 'filter_cnt' counter is used to control a Qdisc class lifetime.
Each filter referecing this class by its id will eventually
increment/decrement this counter in their respective
'add/update/delete' routines.
As these operations are always serialized under rtnl lock, we don't
need an atomic type like 'refcount_t'.

It also means that we lose the overflow/underflow checks already
present in refcount_t, which are valuable to hunt down bugs
where the unsigned counter wraps around as it aids automated tools
like syzkaller to scream in such situations.

Wrap the open coded increment/decrement into helper functions and
add overflow checks to the operations.

Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge branch 'mptcp-cleanup-and-improvements-in-the-selftests'

Matthieu Baerts says:

====================
mptcp: cleanup and improvements in the selftests

This small series of 4 patches adds some improvements in MPTCP
selftests:

- Patch 1 reworks the detailed report of mptcp_join.sh selftest to
  better display what went well or wrong per test.

- Patch 2 adds colours (if supported, forced and/or not disabled) in
  mptcp_join.sh selftest output to help spotting issues.

- Patch 3 modifies an MPTCP selftest tool to interact with the
  path-manager via Netlink to always look for errors if any. This makes
  sure odd behaviours can be seen in the logs and errors can be caught
  later if needed.

- Patch 4 removes stdout and stderr redirections to /dev/null when using
  pm_nl_ctl if no errors are expected in order to log odd behaviours.
====================

Link: https://lore.kernel.org/r/20230730-upstream-net-next-20230728-mptcp-selftests-misc-v1-0-7e9cc530a9cd@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: userspace_pm: unmute unexpected errors

All pm_nl_ctl commands were muted. If there was an unexpected error with
one of them, this was simply not visible in the logs, making the
analysis very hard. It could also hide misuse of commands by mistake.

Now the output is only muted when we do expect to have an error, e.g.
when giving invalid arguments on purpose.

Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20230730-upstream-net-next-20230728-mptcp-selftests-misc-v1-4-7e9cc530a9cd@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: pm_nl_ctl: always look for errors

If a Netlink command for the MPTCP path-managers is not valid, it is
important to check if there are errors. If yes, they need to be reported
instead of being ignored and exiting without errors.

Now if no replies are expected, an ACK from the kernelspace is asked by
the userspace in order to always expect a reply. We can use the same
buffer that is currently always >1024 bytes. Then we can check if there
is an error (err->error), print it if any and report the error.

After this modification, it is required to mute expected errors in
mptcp_join.sh and pm_netlink.sh selftests:

- when trying to add a bad endpoint, e.g. duplicated
- when trying to set the two limits above the hard limit

Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20230730-upstream-net-next-20230728-mptcp-selftests-misc-v1-3-7e9cc530a9cd@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: join: colored results

Thanks to the parent commit, it is easy to change the output and add
some colours to help spotting issues.

The colours are not used if stdout is redirected or if NO_COLOR env var
is set to 1 as specified in https://no-color.org.

It is possible to force displaying the colours even if stdout is
redirected by setting this env var:

  SELFTESTS_MPTCP_LIB_COLOR_FORCE=1

Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20230730-upstream-net-next-20230728-mptcp-selftests-misc-v1-2-7e9cc530a9cd@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: join: rework detailed report

This patch modifies how the detailed results are printed, mainly to
improve what is displayed in case of issue:

- Now the test name (title) is printed earlier, when starting the test
  if it is not intentionally skipped: by doing that, errors linked to
  a test will be printed after having written the test name and then
  avoid confusions.

- Due to the previous item, it is required to add a new line after
  having printed the test name because in case of error with a command,
  it is better not to have the output in the middle of the screen.

- Each check is printed on a dedicated line with aligned status (ok,
  skip, fail): it is easier to spot which one has failed, simpler to
  manage in the code not having to deal with alignment case by case and
  helpers can be used to uniform what is done. These helpers can also be
  useful later to do more actions depending on the results or change in
  one place what is printed.

- Info messages have been reduced and aligned as well. And info messages
  about the creation of the default test files of 1 KB are no longer
  printed.

Example:

  001 no JOIN
        syn                                 [ ok ]
        synack                              [ ok ]
        ack                                 [ ok ]

Or with a skip and a failure:

  001 no JOIN
        syn                                 [ ok ]
        synack                              [fail] got 42 JOIN[s] synack expected 0
  Server ns stats
  (...)
  Client ns stats
  (...)
        ack                                 [skip]

Or with info:

  104 Infinite map
        Test file (size 128 KB) for client
        Test file (size 128 KB) for server
        file received by server has inverted byte at 169
        5 corrupted pkts
        syn                                 [ ok ]
        synack                              [ ok ]

While at it, verify_listener_events() now also print more info in case
of failure and in pm_nl_check_endpoint(), the test is marked as failed
instead of skipped if no ID has been given (internal selftest issue).

Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20230730-upstream-net-next-20230728-mptcp-selftests-misc-v1-1-7e9cc530a9cd@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/hsr: Remove unused function declarations

commit f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)")
introducted these but never implemented.

Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230729123456.36340-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: connector: Fix input argument error paths to skip

Fix input argument parsing paths to skip from their error legs.
This fix helps to avoid false test failure reports without running
the test.

Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Anjali Kulkarni <anjali.k.kulkarni@oracle.com>
Link: https://lore.kernel.org/r/20230729002403.4278-1-skhan@linuxfoundation.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tcx: Fix splat during dev unregister

During unregister_netdevice_many_notify(), the ordering of our concerned
function calls is like this:

  unregister_netdevice_many_notify
    dev_shutdown
qdisc_put
            clsact_destroy
    tcx_uninstall

The syzbot reproducer triggered a case that the qdisc refcnt is not
zero during dev_shutdown().

tcx_uninstall() will then WARN_ON_ONCE(tcx_entry(entry)->miniq_active)
because the miniq is still active and the entry should not be freed.
The latter assumed that qdisc destruction happens before tcx teardown.

This fix is to avoid tcx_uninstall() doing tcx_entry_free() when the
miniq is still alive and let the clsact_destroy() do the free later, so
that we do not assume any specific ordering for either of them.

If still active, tcx_uninstall() does clear the entry when flushing out
the prog/link. clsact_destroy() will then notice the "!tcx_entry_is_active()"
and then does the tcx_entry_free() eventually.

Fixes: e420bed02507 ("bpf: Add fd-based tcx multi-prog infra with link support")
Reported-by: syzbot+376a289e86a0fd02b9ba@syzkaller.appspotmail.com
Reported-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: syzbot+376a289e86a0fd02b9ba@syzkaller.appspotmail.com
Tested-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/222255fe07cb58f15ee662e7ee78328af5b438e4.1690549248.git.daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: bcmgenet: Remove TX ring full logging

There is no need to spam the kernel log with such an indication, remove
this message.

Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230728183945.760531-1-florian.fainelli@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

vsock: Remove unused function declarations

These are never implemented since introduction in
commit d021c344051a ("VSOCK: Introduce VM Sockets")

Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20230729122036.32988-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/smc: Remove unused function declarations

commit f9aab6f2ce57 ("net/smc: immediate freeing in smc_lgr_cleanup_early()")
left behind smc_lgr_schedule_free_work_fast() declaration.
And since commit 349d43127dac ("net/smc: fix kernel panic caused by race of smc_sock")
smc_ib_modify_qp_reset() is not used anymore.

Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Link: https://lore.kernel.org/r/20230729121929.17180-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'connector-proc_filter-test-fixes'

Shuah Khan says:

====================
Connector/proc_filter test fixes

The first patch fixes the LKFT reported compile error, second
one adds .gitignore.
====================

Applying the first 2 patches, third one resent separately.

Link: https://lore.kernel.org/r/cover.1690564372.git.skhan@linuxfoundation.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: connector: Add .gitignore and poupulate it with test

Add gitignore and poupulate it with test name - proc_filter

Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/e3d04cc34e9af07909dc882b50fb1b6f1ce7705b.1690564372.git.skhan@linuxfoundation.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: connector: Fix Makefile to include KHDR_INCLUDES

The test compile fails with following errors. Fix the Makefile
CFLAGS to include KHDR_INCLUDES to pull in uapi defines.

gcc -Wall     proc_filter.c  -o ../tools/testing/selftests/connector/proc_filter
proc_filter.c: In function ‘send_message’:
proc_filter.c:22:33: error: invalid application of ‘sizeof’ to incomplete type ‘struct proc_input’
   22 |                          sizeof(struct proc_input))
      |                                 ^~~~~~
proc_filter.c:42:19: note: in expansion of macro ‘NL_MESSAGE_SIZE’
   42 |         char buff[NL_MESSAGE_SIZE];
      |                   ^~~~~~~~~~~~~~~
proc_filter.c:22:33: error: invalid application of ‘sizeof’ to incomplete type ‘struct proc_input’
   22 |                          sizeof(struct proc_input))
      |                                 ^~~~~~
proc_filter.c:48:34: note: in expansion of macro ‘NL_MESSAGE_SIZE’
   48 |                 hdr->nlmsg_len = NL_MESSAGE_SIZE;
      |                                  ^~~~~~~~~~~~~~~
`

Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Link: https://lore.kernel.org/all/CA+G9fYt=6ysz636XcQ=-KJp7vJcMZ=NjbQBrn77v7vnTcfP2cA@mail.gmail.com/
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/d0055c8cdf18516db8ba9edec99cfc5c08f32a7c.1690564372.git.skhan@linuxfoundation.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

i40e: remove i40e_status

Replace uses of i40e_status to as equivalent as possible error codes.
Remove enum i40e_status as it is no longer needed

Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230728171336.2446156-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tcp: Remove unused function declarations

commit 8a59f9d1e3d4 ("sock: Introduce sk->sk_prot->psock_update_sk_prot()")
left behind tcp_bpf_get_proto() declaration. And tcp_v4_tw_remember_stamp()
function is remove in ccb7c410ddc0 ("timewait_sock: Create and use getpeer op.").
Since commit 686989700cab ("tcp: simplify tcp_mark_skb_lost")
tcp_skb_mark_lost_uncond_verify() declaration is not used anymore.

Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230729122644.10648-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

devlink: Remove unused extern declaration devlink_port_region_destroy()

devlink_port_region_destroy() is never implemented since
commit 544e7c33ec2f ("net: devlink: Add support for port regions").

Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230728132113.32888-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: Use sockaddr_storage for getsockopt(SO_PEERNAME).

Commit df8fc4e934c1 ("kbuild: Enable -fstrict-flex-arrays=3") started
applying strict rules to standard string functions.

It does not work well with conventional socket code around each protocol-
specific sockaddr_XXX struct, which is cast from sockaddr_storage and has
a bigger size than fortified functions expect.  See these commits:

 commit 06d4c8a80836 ("af_unix: Fix fortify_panic() in unix_bind_bsd().")
 commit ecb4534b6a1c ("af_unix: Terminate sun_path when bind()ing pathname socket.")
 commit a0ade8404c3b ("af_packet: Fix warning of fortified memcpy() in packet_getname().")

We must cast the protocol-specific address back to sockaddr_storage
to call such functions.

However, in the case of getsockaddr(SO_PEERNAME), the rationale is a bit
unclear as the buffer is defined by char[128] which is the same size as
sockaddr_storage.

Let's use sockaddr_storage explicitly.

Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: flow_dissector: Use 64bits for used_keys

As 32bits of dissector->used_keys are exhausted,
increase the size to 64bits.

This is base change for ESP/AH flow dissector patch.
Please find patch and discussions at
https://lore.kernel.org/netdev/ZMDNjD46BvZ5zp5I@corigine.com/T/#t

Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw
Tested-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

team: Remove NULL check before dev_{put, hold}

The call netdev_{put, hold} of dev_{put, hold} will check NULL,
so there is no need to check before using dev_{put, hold},
remove it to silence the warning:

./drivers/net/team/team.c:2325:3-10: WARNING: NULL check before dev_{put, hold} functions is not needed.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5991
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: mtk_eth_soc: enable nft hw flowtable_offload for MT7988 SoC

Enable hw Packet Process Engine (PPE) for MT7988 SoC.

Tested-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/5e86341b0220a49620dadc02d77970de5ded9efc.1690441576.git.lorenzo@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: ethernet: mtk_eth_soc: enable page_pool support for MT7988 SoC

In order to recycle pages, enable page_pool allocator for MT7988 SoC.

Tested-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/fd4e8693980e47385a543e7b002eec0b88bd09df.1690440675.git.lorenzo@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: bcmasp: Clean up redundant dev_err_probe()

Referring to platform_get_irq()'s definition, the return value has
already been checked, error message also been printed via
dev_err_probe() if ret < 0. Calling dev_err_probe() one more time
outside platform_get_irq() is obviously redundant.

Removing dev_err_probe() outside platform_get_irq() to clean up
above problem.

Signed-off-by: Chen Jiahao <chenjiahao16@huawei.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Justin Chen <justin.chen@broadcom.com>
Link: https://lore.kernel.org/r/20230727115551.2655840-1-chenjiahao16@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

bonding: 3ad: Remove unused declaration bond_3ad_update_lacp_active()

This is not used since commit 3a755cd8b7c6 ("bonding: add new option lacp_active")

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20230726143816.15280-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'r8152-reduce-control-transfer'

Hayes Wang says:

====================
r8152: reduce control transfer

The two patches are used to reduce the number of control transfer when
access the registers in bulk.
====================

Link: https://lore.kernel.org/r/20230726030808.9093-417-nic_swsd@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

r8152: set bp in bulk

PLA_BP_0 ~ PLA_BP_15 (0xfc28 ~ 0xfc46) are continuous registers, so we
could combine the control transfers into one control transfer.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Link: https://lore.kernel.org/r/20230726030808.9093-419-nic_swsd@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

r8152: adjust generic_ocp_write function

Reduce the control transfer if all bytes of first or the last DWORD are
written.

The original method is to split the control transfer into three parts
(the first DWORD, middle continuous data, and the last DWORD). However,
they could be combined if whole bytes of the first DWORD or last DWORD
are written. That is, the first DWORD or the last DWORD could be combined
with the middle continuous data, if the byte_en is 0xff.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Link: https://lore.kernel.org/r/20230726030808.9093-418-nic_swsd@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: ethernet: slicoss: remove redundant increment of pointer data

The pointer data is being incremented but this change to the pointer
is not used afterwards. The increment is redundant and can be removed.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Link: https://lore.kernel.org/r/20230726164522.369206-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>