arm64: dts: qcom: ipq5332: add QFPROM node

IPQ5332 has efuse region to determine the various HW quirks. Lets
add the initial support and the individual fuses will be added as they
are required.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230526125305.19626-3-quic_kathirav@quicinc.com

dt-bindings: nvmem: qfprom: add compatible for few IPQ SoCs

Add the QFPROM compatible for IPQ5332, IPQ6018 and IPQ9574

Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230526125305.19626-2-quic_kathirav@quicinc.com

arm64: dts: qcom: ipq9574: add support for RDP453 variant

Add the initial device tree support for the Reference Design Platform (RDP)
453 based on IPQ9574 family of SoCs. This patch adds support for Console
UART, SPI NOR and SMPA1 regulator node.

Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230526153152.777-3-quic_devipriy@quicinc.com

dt-bindings: arm: qcom: document AL02-C8 board based on IPQ9574 family

Document AL02-C8 (Reference Design Platform 453) board based on IPQ9574
family of SoCs.

Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230526153152.777-2-quic_devipriy@quicinc.com

arm64: dts: qcom: ipq9574: add support for RDP449 variant

Add the initial device tree support for the Reference Design Platform (RDP)
449 based on IPQ9574 family of SoCs. This patch adds support for Console
UART, SPI NOR and SMPA1 regulator node.

Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230516135013.3547-3-quic_devipriy@quicinc.com

dt-bindings: arm: qcom: document AL02-C6 board based on IPQ9574 family

Document AL02-C6 (Reference Design Platform 449) board based on IPQ9574
family of SoCs.

Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230516135013.3547-2-quic_devipriy@quicinc.com

arm64: dts: qcom: ipq9574: add support for RDP418 variant

Add the initial device tree support for the Reference Design Platform (RDP)
418 based on IPQ9574 family of SoCs. This patch adds support for Console
UART, SPI NOR, eMMC and SMPA1 regulator node.

Co-developed-by: Anusha Rao <quic_anusha@quicinc.com>
Signed-off-by: Anusha Rao <quic_anusha@quicinc.com>
Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230510104359.16678-3-quic_devipriy@quicinc.com

dt-bindings: arm: qcom: document AL02-C2 board based on IPQ9574 family

Document AL02-C2 (Reference Design Platform 418) board based on IPQ9574
family of SoCs.

Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230510104359.16678-2-quic_devipriy@quicinc.com

arm64: dts: qcom: ipq9574: Add cpufreq support

Add cpu freq nodes in the device tree to bump cpu frequency above 800MHz.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Co-developed-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230517172527.1968-4-quic_devipriy@quicinc.com

arm64: dts: qcom: ipq9574: Add SMPA1 regulator node

Add support for SMPA1 regulator node in IPQ9574.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Co-developed-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230517172527.1968-3-quic_devipriy@quicinc.com

arm64: dts: qcom: ipq9574: Add RPM related nodes

Add RPM Glink & RPM message RAM nodes to support frequency scaling
on IPQ9574.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Co-developed-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230517172527.1968-2-quic_devipriy@quicinc.com

arm64: dts: qcom: ipq9574: Add support for APSS clock controller

Add the APCS & A73 PLL nodes to support CPU frequency scaling.

Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230406061314.10916-5-quic_devipriy@quicinc.com

arm64: dts: qcom: ipq9574: rename al02-c7 dts to rdp433

Rename the dts after Reference Design Platform(RDP) to adopt
standard naming convention.

Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230425084010.15581-7-quic_devipriy@quicinc.com

arm64: dts: qcom: pm7250b: add missing spmi-vadc include

This file is using definitions from the spmi-vadc header, so we need to
include it.

Fixes: 11975b9b8135 ("arm64: dts: qcom: Add pm7250b PMIC")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230407-pm7250b-sid-v1-1-fc648478cc25@fairphone.com

arm64: dts: qcom: Add msm8939 Sony Xperia M4 Aqua

Add a basic booting DTS for the Sony Xperia M4 Aqua aka "tulip".

Tulip is paired with:

- wcn3660
- smb1360 battery charger
- 720p Truly NT35521 Panel

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230407194905.611461-6-bryan.odonoghue@linaro.org

arm64: dts: qcom: Add Square apq8039-t2 board

The apq8039-t2 is an apq8039 based board paired with a wcn3680b WiFi
chipset.

Co-developed-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Co-developed-by: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Co-developed-by: Benjamin Li <benl@squareup.com>
Signed-off-by: Benjamin Li <benl@squareup.com>
Co-developed-by: James Willcox <jwillcox@squareup.com>
Signed-off-by: James Willcox <jwillcox@squareup.com>
Co-developed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Co-developed-by: Joseph Gates <jgates@squareup.com>
Signed-off-by: Joseph Gates <jgates@squareup.com>
Co-developed-by: Max Chen <mchen@squareup.com>
Signed-off-by: Max Chen <mchen@squareup.com>
Co-developed-by: Zac Crosby <zac@squareup.com>
Signed-off-by: Zac Crosby <zac@squareup.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230407194905.611461-5-bryan.odonoghue@linaro.org

arm64: dts: qcom: Add msm8939-pm8916.dtsi include

The msm8939-pm8916.dtsi include configures the regulator supplies of
MSM8939 used together with PM8916, as recommended by Qualcomm. In rare
cases where boards deviate from the recommended design they can just
avoid using this include.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230407194905.611461-4-bryan.odonoghue@linaro.org

arm64: dts: qcom: Add msm8939 SoC

Add msm8939 a derivative SoC of msm8916. This SoC contains a number of key
differences to msm8916.

- big.LITTLE Octa Core - quad 1.5GHz + quad 1.0GHz
- DRAM 1x800 LPDDR3
- Camera 4+4 lane CSI
- Venus @ 1080p60 HEVC
- DSI x 2
- Adreno A405
- WiFi wcn3660/wcn3680b 802.11ac

Co-developed-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Co-developed-by: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Co-developed-by: Benjamin Li <benl@squareup.com>
Signed-off-by: Benjamin Li <benl@squareup.com>
Co-developed-by: James Willcox <jwillcox@squareup.com>
Signed-off-by: James Willcox <jwillcox@squareup.com>
Co-developed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Co-developed-by: Joseph Gates <jgates@squareup.com>
Signed-off-by: Joseph Gates <jgates@squareup.com>
Co-developed-by: Max Chen <mchen@squareup.com>
Signed-off-by: Max Chen <mchen@squareup.com>
Co-developed-by: Zac Crosby <zac@squareup.com>
Signed-off-by: Zac Crosby <zac@squareup.com>
Co-developed-by: Vincent Knecht <vincent.knecht@mailoo.org>
Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
Co-developed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230407194905.611461-3-bryan.odonoghue@linaro.org

dt-bindings: vendor-prefixes: Add Square

Add vendor prefix for Square (https://squareup.com).

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230407194905.611461-2-bryan.odonoghue@linaro.org

dt-bindings: arm: qcom: Add missing msm8960

The list of supported 'SoC's didn't include msm8960 even though
qcom,msm8960-cdp exists.

Signed-off-by: Rudraksha Gupta <guptarud@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230524230338.120619-1-guptarud@gmail.com

arm64: dts: qcom: sdm632-fairphone-fp3: Add notification LED

The phone features a notification LED connected to the pmi632. Configure
the RGB led found on it.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230414-pmi632-v3-2-079d2cada699@z3ntu.xyz

arm64: dts: qcom: Add PMI632 PMIC

The PMI632, commonly found on SoCs with SDM632 has various standard
functions like ADC, GPIOs, LPG and more.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230414-pmi632-v3-1-079d2cada699@z3ntu.xyz

arm64: dts: qcom: sdm845-shift-axolotl: enable flash LEDs

The SHIFT6mq (axolotl) is an SDM845-based smartphone with 2 flash LEDs.
One LED is white, the other one is yellow. Define both LEDs in the DTS
so they can be used as flash or torch and enable the flash LED
controller to control them in PMI8998.

Signed-off-by: Dylan Van Assche <me@dylanvanassche.be>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230518133113.273880-4-me@dylanvanassche.be

arm64: dts: qcom: pmi8998: add flash LED controller

Qualcomm PMIC PMI8998 has a 3 channel flash LED driver which is used
by many phones for 1 or 2 flash LEDs. Each LED can be used in flash mode
or torch mode. Add the flash LED controller node to PMI8998 DTS.

Signed-off-by: Dylan Van Assche <me@dylanvanassche.be>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230518133113.273880-3-me@dylanvanassche.be

arm64: dts: qcom: sm6115: Add CPU idle-states

Add CPU idle-state nodes and power-domains in Qualcomm sm6115 SoC dtsi.

Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230518080031.2509250-1-bhupesh.sharma@linaro.org

arm64: dts: qcom: msm8916-pm8916: Mark always-on regulators

Some of the regulators must be always-on to ensure correct operation of
the system, e.g. PM8916 L2 for the LPDDR RAM, L5 for most digital I/O
and L7 for the CPU PLL (strictly speaking the CPU PLL might only need
an active-only vote but this is not supported for regulators in
mainline currently).

The RPM firmware seems to enforce that internally, these supplies stay
on even if we vote for them to power off (and there is no other
processor running). This means it's pointless to keep sending
enable/disable requests because they will just be ignored.
Also, drivers are much more likely to get a wrong impression of the
regulator status, because regulator_is_enabled() will return false when
there are no users, even though the regulator is always on.

Describe this properly by marking the regulators as always-on.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230510-msm8916-regulators-v1-8-54d4960a05fc@gerhold.net

arm64: dts: qcom: msm8916: Define regulator constraints next to usage

Right now each MSM8916 device has a huge block of regulator constraints
with allowed voltages for each regulator. For lack of better
documentation these voltages are often copied as-is from the vendor
device tree, without much extra thought.

Unfortunately, the voltages in the vendor device trees are often
misleading or even wrong, e.g. because:

 - There is a large voltage range allowed and the actual voltage is
   only set somewhere hidden in some messy vendor driver. This is often
   the case for pm8916_{l14,l15,l16} because they have a broad range of
   1.8-3.3V by default.

 - The voltage is actually wrong but thanks to the voltage constraints
   in the RPM firmware it still ends up applying the correct voltage.

To have proper regulator constraints it is important to review them in
context of the usage. The current setup in the MSM8916 device trees
makes this quite hard because each device duplicates the standard
voltages for components of the SoC and mixes those with minor
device-specific additions and dummy voltages for completely unused
regulators.

The actual usage of the regulators for the SoC components is in
msm8916-pm8916.dtsi, so it can and should also define the related
voltage constraints. These are not board-specific but defined in the
APQ8016E/PM8916 Device Specification. The board DT can then focus on
describing the actual board-specific regulators, which makes it much
easier to review and spot potential mistakes there.

Note that this commit does not make any functional change. All used
regulators still have the same regulator constraints as before. Unused
regulators do not have regulator constraints anymore because most of
these were too broad or even entirely wrong. They should be added back
with proper voltage constraints when there is an actual usage.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230510-msm8916-regulators-v1-7-54d4960a05fc@gerhold.net

arm64: dts: qcom: msm8916-pm8916: Clarify purpose

Goal of the msm8916-pm8916.dtsi is to reduce the boilerplate necessary
to create a device tree for a typical board with the MSM8916 SoC
combined with the PM8916 PMIC. > 99% of all MSM8916 boards use the same
standard setup where many of the PM8916 regulators have a fixed purpose
and only some are left up for board-specific use.

While MSM8916 (and perhaps MSM8939 soon) is currently the only platform
with such an include, it has definitely proven useful. With more than
30 boards using it (not all of them upstream yet) it simplifies the
review a lot and reduces the chance of configuring the standard
components incorrectly.

In preparation of extending its scope slightly, add a comment at the
top that clearly explains what the .dtsi represents and when it should
(or should not) be used.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230510-msm8916-regulators-v1-6-54d4960a05fc@gerhold.net

arm64: dts: qcom: pm8916: Move default regulator "-supply"s

Some of the power supplies for the analog audio codec in PM8916 are
wired externally. While most boards use the regulators currently
specified in pm8916.dtsi, in theory it could be connected differently.

We already have msm8916-pm8916.dtsi that models that standard setup
used by most devices so move the -supply properties there and keep
the base pm8916.dtsi independent.

Currently all MSM8916 boards in mainline make use of
msm8916-pm8916.dtsi, so it is not necessary to adjust any other boards.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230510-msm8916-regulators-v1-5-54d4960a05fc@gerhold.net

arm64: dts: qcom: msm8916: Disable audio codecs by default

Not every device has something connected to the digital audio codec
in MSM8916 and/or the analog audio codec in PM8916. Disable those by
default so the hardware is only powered up when necessary.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230510-msm8916-regulators-v1-4-54d4960a05fc@gerhold.net

arm64: dts: qcom: msm8916: Fix regulator constraints

The regulator constraints for most MSM8916 devices (except DB410c) were
originally taken from Qualcomm's msm-3.10 vendor device tree (for lack
of better documentation). Unfortunately it turns out that Qualcomm's
voltages are slightly off as well and do not match the voltage
constraints applied by the RPM firmware.

This means that we sometimes request a specific voltage but the RPM
firmware actually applies a much lower or higher voltage. This is
particularly critical for pm8916_l11 which is used as SD card VMMC
regulator: The SD card can choose a voltage from the current range of
1.8 - 2.95V. If it chooses to run at 1.8V we pretend that this is fine
but the RPM firmware will still silently end up configuring 2.95V.
This can be easily reproduced with a multimeter or by checking the
SPMI hardware registers of the regulator.

Fix this by making the voltages match the actual "specified range" in
the PM8916 Device Specification which is enforced by the RPM firmware.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230510-msm8916-regulators-v1-3-54d4960a05fc@gerhold.net

arm64: dts: qcom: apq8016-sbc: Fix 1.8V power rail on LS expansion

The 96Boards specification expects a 1.8V power rail on the low-speed
expansion connector that is able to provide at least 0.18W / 100 mA.
According to the DB410c hardware user manual this is done by connecting
both L15 and L16 in parallel with up to 55mA each (for 110 mA total) [1].

Unfortunately the current regulator setup in the DB410c device tree
does not implement the specification correctly and only provides 5 mA:

  - Only L15 is marked always-on, so L16 is never enabled.
  - Without specifying a load the regulator is put into LPM where
    it can only provide 5 mA.

Fix this by:

  - Adding proper voltage constraints for L16.
  - Making L16 always-on.
  - Adding regulator-system-load for both L15 and L16. 100 mA should be
    available in total, so specify 50 mA for each. (The regulator
    hardware can only be in normal (55 mA) or low-power mode (5 mA) so
    this will actually result in the expected 110 mA total...)

[1]: https://www.96boards.org/documentation/consumer/dragonboard/dragonboard410c/hardware-docs/hardware-user-manual.md.html#power-supplies

Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Fixes: 828dd5d66f0f ("arm64: dts: apq8016-sbc: make 1.8v available on LS expansion")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230510-msm8916-regulators-v1-2-54d4960a05fc@gerhold.net

arm64: dts: qcom: apq8016-sbc: Fix regulator constraints

For some reason DB410c has completely bogus regulator constraints that
actually just correspond to the programmable voltages which are already
provided by the regulator driver. Some of them are not just outside the
recommended operating conditions of the APQ8016E SoC but even exceed
the absolute maximum ratings, potentially risking permanent device
damage.

In practice it's not quite as dangerous thanks to the RPM firmware:
It turns out that it has its own voltage constraints and silently
clamps all regulator requests. For example, requesting 3.3V for L5
(allowed by the current regulator constraints!) still results in 1.8V
being programmed in the actual regulator hardware.

Experimentation with various voltages shows that the internal RPM
voltage constraints roughly correspond to the safe "specified range"
in the PM8916 Device Specification (rather than the "programmable
range" used inside apq8016-sbc.dtsi right now).

Combine those together with some fixed voltages used in the old
msm-3.10 device tree from Qualcomm to give DB410c some actually valid
voltage constraints.

Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Fixes: 4c7d53d16d77 ("arm64: dts: apq8016-sbc: add regulators support")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230510-msm8916-regulators-v1-1-54d4960a05fc@gerhold.net

arm64: dts: qcom: sm8250-xiaomi-elish: remove redundant empty line

Remove a redundant empty line introduced by
  commit 51c4c2bd6f31 ("arm64: dts: qcom: sm8250-xiaomi-elish-boe: Add mdss and dsi panel")

Signed-off-by: Jianhua Lu <lujianhua000@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230517133340.21111-1-lujianhua000@gmail.com

arm64: dts: qcom: ipq9574: add few device nodes

Add QUP(SPI / I2C) peripheral, PRNG, WDOG and the remaining UART nodes.
While at it, enable the SPI NOR in RDP433 board.

Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230517072806.13170-1-quic_kathirav@quicinc.com

arm64: dts: qcom: sm8550-qrd: add display and panel

Enable Display Subsystem with Visionox VTDR6130 Panel (same as on
MTP8550).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230516154539.238655-3-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sm8550-mtp: drop redundant MDP status

MDP in sm8550.dtsi is not disabled (although its parent MDSS is), so
board DTS does not have to enable it.

Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230516154539.238655-2-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sm8550: enable DISPCC by default

Enable the Display Clock Controller by default in SoC DTSI so unused
clocks can be turned off.  It does not require any external resources,
so as core SoC component should be always available to boards.

Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230516154539.238655-1-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sm8550-qrd: add flash LEDs

Enable PM8550 PMIC flash LED controller and add two flash LEDs using
four current outputs.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230516150202.188655-3-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: pm8550: add flash LED controller

Add node for PM8550 PMIC flash LED controller.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230516150202.188655-2-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sm6350: Move wifi node to correct place

Somehow wifi was placed further up in the file than where it should be.
Move it down so the nodes are sorted by reg again.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230516-sm6350-order-v1-1-5c3b7c4cd761@fairphone.com

arm64: dts: qcom: sm8450: Add missing RPMhPD OPP levels

We need more granularity for things like the GPU. Add the missing levels.

This unfortunately requires some re-indexing, resulting in an ugly diff.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230516005306.952821-1-konrad.dybcio@linaro.org

arm64: dts: qcom: Add Acer Aspire 1

Acer Aspire 1 is a WoA laptop based on Snapdragon 7c gen1 platform.

The laptop design is similar to trogdor in the choice of primary
components but the specifics on usage of those differ slightly.

Add the devicetree for the laptop with support for most of the
hardware present.

Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230515093744.289045-5-nikita@trvn.ru

dt-bindings: arm: qcom: Add Acer Aspire 1

Acer Aspire 1 is a laptop based on sc7180. Document it's compatible.

Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230515093744.289045-4-nikita@trvn.ru

arm64: dts: qcom: sc7180: Drop redundant disable in mdp

mdss is useless without a display controller which makes explicitly
enabling mdp redundant. Have it enabled by default to drop the extra
node for all users.

Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230515093744.289045-3-nikita@trvn.ru

arm64: dts: qcom: sc7180: Don't enable lpass clocks by default

lpass clocks are usually blocked from HLOS by the firmware and
instead are managed by the ADSP. Mark them as reserved and explicitly
enable in the CrOS boards that have special, cooperative firmware.

The IDP board gets lpass clocks disabled as it doesn't make use of sound
anyway and might use Qualcomm firmware that blocks those clocks. [1]

[1] https://lore.kernel.org/all/ZBJhmDd3zK%2FAiwBD@google.com/

Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230515093744.289045-2-nikita@trvn.ru

arm64: dts: qcom: sm8550-mtp: add WCD9385 audio-codec

Add Qualcomm Aqstic WCD9385 audio codec on two Soundwire interfaces: RX
and TX.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230512160452.206585-2-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sm8550-qrd: add WCD9385 audio-codec

Add Qualcomm Aqstic WCD9385 audio codec on two Soundwire interfaces: RX
and TX.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230512160452.206585-1-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: msm8916-ufi: make UDC dual mode

It's possible to use this device with a (non-standard) hub to get USB
working in host mode, but dr_mode="peripheral" prevents the UDC to
do so.
Remove dr_mode="peripheral" and add usb-role-switch so that it defaults
to otg mode and can be switched to host mode in userspace.

Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/TYZPR04MB632102315884225B7343533B96729@TYZPR04MB6321.apcprd04.prod.outlook.com

arm64: dts: qcom: msm8953: Add BLSP DMAs for I2C

MSM8953 has two DMA controllers for the various I2C, SPI and UART
busses. Add the nodes and configure all the I2C nodes so that the driver
can use the DMA.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230422-msm8953-blsp-dma-v1-1-0024801bb587@z3ntu.xyz

arm64: dts: qcom: pm8953: add GPIOs

Add a node for the GPIOs found on the pm8953.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230421-pm8953-gpio-v1-3-3d33e2de47e3@z3ntu.xyz

arm64: dts: qcom: sm6125: add unit address to soc node

"soc" node is supposed to have unit address:

Warning (unit_address_vs_reg): /soc: node has a reg or ranges property, but no unit name

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230420063610.11068-7-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sdm630: add unit address to soc node

"soc" node is supposed to have unit address:

  Warning (unit_address_vs_reg): /soc: node has a reg or ranges property, but no unit name

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230420063610.11068-6-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: msm8998: add unit address to soc node

"soc" node is supposed to have unit address:

  Warning (unit_address_vs_reg): /soc: node has a reg or ranges property, but no unit name

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230420063610.11068-5-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: msm8996: add unit address to soc node

"soc" node is supposed to have unit address:

  Warning (unit_address_vs_reg): /soc: node has a reg or ranges property, but no unit name

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230420063610.11068-4-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: msm8994: add unit address to soc node

"soc" node is supposed to have unit address:

  Warning (unit_address_vs_reg): /soc: node has a reg or ranges property, but no unit name

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230420063610.11068-3-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: ipq8074: add unit address to soc node

"soc" node is supposed to have unit address:

  Warning (unit_address_vs_reg): /soc: node has a reg or ranges property, but no unit name

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230420063610.11068-2-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: ipq6018: add unit address to soc node

"soc" node is supposed to have unit address:

  Warning (unit_address_vs_reg): /soc: node has a reg or ranges property, but no unit name

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230420063610.11068-1-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sdm845-polaris: add missing touchscreen child node reg

Add missing reg property to touchscreen child node to fix dtbs W=1 warnings:

  Warning (unit_address_vs_reg): /soc@0/geniqup@ac0000/i2c@a98000/touchscreen@20/rmi4-f12@12: node has a unit name, but no reg or ranges property

Fixes: be497abe19bf ("arm64: dts: qcom: Add support for Xiaomi Mi Mix2s")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Molly Sophia <mollysophia379@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-18-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sm8550: correct pinctrl unit address

Match unit-address to reg entry to fix dtbs W=1 warnings:

  Warning (simple_bus_reg): /soc@0/pinctrl@f000000: simple-bus unit address format error, expected "f100000"

Fixes: ffc50b2d3828 ("arm64: dts: qcom: Add base SM8550 dtsi")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-17-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sm8550: correct crypto unit address

Match unit-address to reg entry to fix dtbs W=1 warnings:

  Warning (simple_bus_reg): /soc@0/crypto@1de0000: simple-bus unit address format error, expected "1dfa000"

Fixes: 433477c3bf0b ("arm64: dts: qcom: sm8550: add QCrypto nodes")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-16-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sm8350: correct USB phy unit address

Match unit-address to reg entry to fix dtbs W=1 warnings:

  Warning (simple_bus_reg): /soc@0/phy@88e9000: simple-bus unit address format error, expected "88e8000"

Fixes: 2458a305e80e ("arm64: dts: qcom: sm8350: switch to combo usb3/dp phy")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-15-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sm8350: correct PCI phy unit address

Match unit-address to reg entry to fix dtbs W=1 warnings:

  Warning (simple_bus_reg): /soc@0/phy@1c0f000: simple-bus unit address format error, expected "1c0e000"

Fixes: 6daee40678a0 ("arm64: dts: qcom: sm8350: add PCIe devices")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-14-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sm8350: correct DMA controller unit address

Match unit-address to reg entry to fix dtbs W=1 warnings:

  Warning (simple_bus_reg): /soc@0/dma-controller@900000: simple-bus unit address format error, expected "9800000"

Fixes: bc08fbf49bc8 ("arm64: dts: qcom: sm8350: Define GPI DMA engines")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-13-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sm6115: correct thermal-sensor unit address

Match unit-address to reg entry to fix dtbs W=1 warnings:

  Warning (simple_bus_reg): /soc@0/thermal-sensor@4410000: simple-bus unit address format error, expected "4411000"

Fixes: 7b74cba6b13f ("arm64: dts: qcom: sm6115: Add TSENS node")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-12-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sdm845: correct camss unit address

Match unit-address to reg entry to fix dtbs W=1 warnings:

  Warning (simple_bus_reg): /soc@0/camss@a00000: simple-bus unit address format error, expected "acb3000"

Fixes: d48a6698a6b7 ("arm64: dts: qcom: sdm845: Add CAMSS ISP node")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-11-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sdm630: correct camss unit address

Match unit-address to reg entry to fix dtbs W=1 warnings:

  Warning (simple_bus_reg): /soc/camss@ca00000: simple-bus unit address format error, expected "ca00020"

Fixes: f3d5d3cc6971 ("arm64: dts: qcom: sdm630: Configure the camera subsystem")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-10-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: msm8996: correct camss unit address

Match unit-address to reg entry to fix dtbs W=1 warnings:

  Warning (simple_bus_reg): /soc/camss@a00000: simple-bus unit address format error, expected "a34000"

Fixes: e0531312e78f ("arm64: dts: qcom: msm8996: Add CAMSS support")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-9-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: msm8994: correct SPMI unit address

Match unit-address to reg entry to fix dtbs W=1 warnings:

  Warning (simple_bus_reg): /soc/spmi@fc4c0000: simple-bus unit address format error, expected "fc4cf000"

Fixes: b0ad598f8ec0 ("arm64: dts: qcom: msm8994: Add SPMI PMIC arbiter device")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-8-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: msm8976: correct MMC unit address

Match unit-address to reg entry to fix dtbs W=1 warnings:

  Warning (simple_bus_reg): /soc@0/mmc@7824000: simple-bus unit address format error, expected "7824900"
  Warning (simple_bus_reg): /soc@0/mmc@7864000: simple-bus unit address format error, expected "7864900"
  Warning (simple_bus_reg): /soc@0/mmc@7a24000: simple-bus unit address format error, expected "7a24900"

Fixes: 0484d3ce0902 ("arm64: dts: qcom: Add DTS for MSM8976 and MSM8956 SoCs")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-7-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: msm8953: correct WCNSS unit address

Match unit-address to reg entry to fix dtbs W=1 warnings:

  Warning (simple_bus_reg): /soc@0/remoteproc@a21b000: simple-bus unit address format error, expected "a204000"

Fixes: b12428640ebe ("arm64: dts: MSM8953: Add wcnss nodes")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-6-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: msm8953: correct IOMMU unit address

Match unit-address to reg entry to fix dtbs W=1 warnings:

  Warning (simple_bus_reg): /soc@0/iommu@1e00000: simple-bus unit address format error, expected "1e20000"

Fixes: c0b9575a3606 ("arm64: dts: qcom: msm8953: add APPS IOMMU")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-5-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: msm8916: correct WCNSS unit address

Match unit-address to reg entry to fix dtbs W=1 warnings:

  Warning (simple_bus_reg): /soc@0/remoteproc@a21b000: simple-bus unit address format error, expected "a204000"

Fixes: 88106096cbf8 ("ARM: dts: msm8916: Add and enable wcnss node")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-4-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: msm8916: correct MMC unit address

Match unit-address to reg entry to fix dtbs W=1 warnings:

  Warning (simple_bus_reg): /soc@0/mmc@7824000: simple-bus unit address format error, expected "7824900"
  Warning (simple_bus_reg): /soc@0/mmc@7864000: simple-bus unit address format error, expected "7864900"

Fixes: c4da5a561627 ("arm64: dts: qcom: Add msm8916 sdhci configuration nodes")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-3-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: msm8916: correct camss unit address

Match unit-address to reg entry to fix dtbs W=1 warnings:

  Warning (simple_bus_reg): /soc@0/camss@1b00000: simple-bus unit address format error, expected "1b0ac00"

Fixes: 58f479f90a7c ("arm64: dts: qcom: msm8916: Add CAMSS support")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-2-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: ipq6018: correct qrng unit address

Match unit-address to reg entry to fix dtbs W=1 warnings:

  Warning (simple_bus_reg): /soc/qrng@e1000: simple-bus unit address format error, expected "e3000"

Fixes: 5bf635621245 ("arm64: dts: ipq6018: Add a few device nodes")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-1-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: msm8998: add blsp spi nodes

Add pinctrl and qup nodes in msm8998 device tree to support spi.
Values were ported from downstream msm-4.4 kernel.

Signed-off-by: Arnaud Vrac <avrac@freebox.fr>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230417-msm8998-spi-v2-1-b314c6d9ea31@freebox.fr

arm64: dts: qcom: msm8996-tone: Enable LPG LEDs

Enable the notification LED(s) wired up to the PMI8994(6) LPG.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230413-tone_led-v1-1-bc3c73393bfa@linaro.org

arm64: dts: qcom: sm8250-edo: Enable Venus

Enable Venus on Edo phones. The firmware is signed, as per usual.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230412-edo_venus-v1-1-bcfc82e0efc3@linaro.org

arm64: dts: qcom: sm8150-kumano: Enable SDHCI2

Set up and enable SDHCI2 to enable the microSD slot on Kumano
devices.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230315-topic-kumano_dts0-v2-4-0ca7fa521b86@linaro.org

arm64: dts: qcom: sm8150-kumano: Set up camera fixed regulators

Sony - as per usual - used a whole bunch of GPIO-gated fixed
voltage regulators for camera sensors on Kumano. Describe them
and the corresponding pins.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230315-topic-kumano_dts0-v2-3-0ca7fa521b86@linaro.org

arm64: dts: qcom: sm8150-kumano: Add GPIO line names for TLMM

Sony ever so graciously provides GPIO line names in their downstream
kernel (though sometimes they are not 100% accurate and you can judge
that by simply looking at them and with what drivers they are used).

Add these to the common DTSI to better document the hardware.

The pin assignment for TLMM is identical on both devices. Great job!

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230315-topic-kumano_dts0-v2-2-0ca7fa521b86@linaro.org

arm64: dts: qcom: sm8150-kumano: Add GPIO line names for PMIC GPIOs

Sony ever so graciously provides GPIO line names in their downstream
kernel (though sometimes they are not 100% accurate and you can judge
that by simply looking at them and with what drivers they are used).

Add these to the Griffin and Bahamut device trees to better document
the hardware.

They are the same on both devices! Very nice!

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230315-topic-kumano_dts0-v2-1-0ca7fa521b86@linaro.org

arm64: dts: qcom: pm8998: don't use GIC_SPI for SPMI interrupts

Unlike typical GIC interrupts, first cell for SPMI interrupts is the
USID rather than GIC_SPI/GIC_PPI/GIC_LPI qualifier. Fix the resin
interrupt to use USID value 0x0 rather than GIC_SPI define.

Fixes: f86ae6f23a9e ("arm64: dts: qcom: sagit: add initial device tree for sagit")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230409182145.122895-1-dmitry.baryshkov@linaro.org

arm64: dts: qcom: sm8550: Add video clock controller

Add device node for video clock controller on Qualcomm SM8550 platform.

Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230524145203.13153-5-quic_jkona@quicinc.com

arm64: dts: qcom: sm8450: Add video clock controller

Add device node for video clock controller on Qualcomm SM8450 platform.

Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230524140656.7076-4-quic_tdas@quicinc.com

Merge branch '20230524140656.7076-2-quic_tdas@quicinc.com' into HEAD

Merge the SM8450 Video Clock Controller DeviceTree binding topic branch
in order to get access to the clock constants defined by the binding.

dt-bindings: clock: qcom: Add SM8450 video clock controller

Add device tree bindings for the video clock controller on Qualcomm
SM8450 platform.

Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230524140656.7076-2-quic_tdas@quicinc.com

arm64: dts: qcom: ipq8074: Add QUP5 SPI node

Add node to support the QUP5 SPI controller inside of IPQ8074.
Some devices use this bus in order to manage external switches.

Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230426185647.180166-1-robimarko@gmail.com

arm64: dts: qcom: sa8155p-adp: Move mtl nodes into ethernet node

The mtl nodes aren't evaluated unless they're under the node with the
compatible. Move them so they're now evaluated in case future patchsets
modify them incorrectly.

An example of this can be seen in the link.

Link: https://lore.kernel.org/linux-arm-msm/20230414145844.wyg6pt623pzqwh5l@halaney-x13s/
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230501212446.2570364-5-ahalaney@redhat.com

arm64: dts: qcom: sa8155p-adp: Remove unneeded rgmii_phy information

Using interrupts-extended already indicates what the interrupt-parent
is, so drop the explicit interrupt-parent.

The comment about this being the phy-intr is not helpful either, since
this is the only interrupt in the phy node.

Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230501212446.2570364-4-ahalaney@redhat.com

arm64: dts: qcom: Make -cells decimal

The property logically makes sense in decimal, and is the standard used
elsewhere.

Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230501212446.2570364-3-ahalaney@redhat.com

arm64: dts: qcom: sa8155p-adp: Make compatible the first property

As stated at the below link in another review, compatible is always the
first property.

Follow suit here to avoid copying incorrectly in the future.

Link: https://lore.kernel.org/netdev/20230331215804.783439-1-ahalaney@redhat.com/T/#ma76b4116bbb9e49ee4bcf699e40935d80965b3f3
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230501212446.2570364-2-ahalaney@redhat.com

arm64: dts: qcom: sc7280: Fix EUD dt node syntax

As noted by Konrad while reviewing [1], fix the EUD and DWC3
node syntax in sc7280 dtsi file.

While at it also fix the errors reported by '$ make dtbs_check'
for the EUD node:

 arch/arm64/boot/dts/qcom/sc7280-crd-r3.dtb: eud@88e0000: ports:
    'oneOf' conditional failed, one must be fixed:
'port' is a required property
'#address-cells' is a required property
'#size-cells' is a required property
  From schema: Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml

[1]. https://lore.kernel.org/linux-arm-msm/20221231131945.3286639-1-bhupesh.sharma@linaro.org

Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230502093959.1258889-2-bhupesh.sharma@linaro.org

arm64: dts: qcom: pmk8550: add reboot-mode node using sdam_2 nvmem

Introduce sdam_2 node, which is to be used via nvmem for power on
reasons during reboot. Add supported PoN reasons supported via sdam_2
node.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230503-topic-sm8450-upstream-reboot-reason-v1-2-c5ac3dd5b49f@linaro.org

arm64: dts: qcom: pmk8350: add reboot-mode node using sdam_2 nvmem

Introduce sdam_2 node, which is to be used via nvmem for power on
reasons during reboot. Add supported PoN reasons supported via sdam_2
node.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230503-topic-sm8450-upstream-reboot-reason-v1-1-c5ac3dd5b49f@linaro.org

arm64: dts: qcom: enable dual ("bonded") DSI mode for DB845c

Now as both lt9611 and drm/msm drivers were updated to handle the 4k
modes over DSI, enable "bonded" DSI mode on DB845c. This way the board
utilizes both DSI links and thus can support 4k on the HDMI output.

Cc: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230504160430.4014206-1-dmitry.baryshkov@linaro.org

arm64: dts: qcom: qrb4210-rb2: Enable aDSP and cDSP remoteproc nodes

Enable the aDSP and cDSP remoteproc nodes on Qualcomm QRB4210 RB2 board.

Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230516075908.2323372-4-bhupesh.sharma@linaro.org

arm64: dts: qcom: qrb4210-rb2: Fix CD gpio for SDHC2

Card-Detect (CD) gpio for SDHC2 is an active GPIO line. Fix the same.
This allows the uSD card to be properly detected on the board.

Fixes: 8d58a8c0d930 ("arm64: dts: qcom: Add base qrb4210-rb2 board dts")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230516075908.2323372-3-bhupesh.sharma@linaro.org

arm64: dts: qcom: qrb4210-rb2: Add SD pinctrl states

Add the default and sleep pinctrl states for SDHC1 & 2 controllers
on QRB4210 RB2 board.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230516075908.2323372-2-bhupesh.sharma@linaro.org