git.monstr.eu Git - linux-2.6-microblaze.git/log

selftests: mptcp: join: skip test if iptables/tc cmds fail

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

Some tests are using IPTables and/or TC commands to force some
behaviours. If one of these commands fails -- likely because some
features are not available due to missing kernel config -- we should
intercept the error and skip the tests requiring these features.

Note that if we expect to have these features available and if
SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var is set to 1, the tests
will be marked as failed instead of skipped.

This patch also replaces the 'exit 1' by 'return 1' not to stop the
selftest in the middle without the conclusion if there is an issue with
NF or TC.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 8d014eaa9254 ("selftests: mptcp: add ADD_ADDR timeout test case")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: join: skip check if MIB counter not supported

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

One of them is the MPTCP MIB counters introduced in commit fc518953bc9c
("mptcp: add and use MIB counter infrastructure") and more later. The
MPTCP Join selftest heavily relies on these counters.

If a counter is not supported by the kernel, it is not displayed when
using 'nstat -z'. We can then detect that and skip the verification. A
new helper (get_counter()) has been added to do the required checks and
return an error if the counter is not available.

Note that if we expect to have these features available and if
SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var is set to 1, the tests
will be marked as failed instead of skipped.

This new helper also makes sure we get the exact counter we want to
avoid issues we had in the past, e.g. with MPTcpExtRmAddr and
MPTcpExtRmAddrDrop sharing the same prefix. While at it, we uniform the
way we fetch a MIB counter.

Note for the backports: we rarely change these modified blocks so if
there is are conflicts, it is very likely because a counter is not used
in the older kernels and we don't need that chunk.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: b08fbf241064 ("selftests: add test-cases for MPTCP MP_JOIN")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: join: helpers to skip tests

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

Here are some helpers that will be used to mark subtests as skipped if a
feature is not supported. Marking as a fix for the commit introducing
this selftest to help with the backports.

While at it, also check if kallsyms feature is available as it will also
be used in the following commits to check if MPTCP features are
available before starting a test.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: b08fbf241064 ("selftests: add test-cases for MPTCP MP_JOIN")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: join: use 'iptables-legacy' if available

IPTables commands using 'iptables-nft' fail on old kernels, at least
5.15 because it doesn't see the default IPTables chains:

$ iptables -L
iptables/1.8.2 Failed to initialize nft: Protocol not supported

As a first step before switching to NFTables, we can use iptables-legacy
if available.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 8d014eaa9254 ("selftests: mptcp: add ADD_ADDR timeout test case")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: lib: skip if not below kernel version

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

A new function is now available to easily detect if a feature is
missing by looking at the kernel version. That's clearly not ideal and
this kind of check should be avoided as soon as possible. But sometimes,
there are no external sign that a "feature" is available or not:
internal behaviours can change without modifying the uAPI and these
selftests are verifying the internal behaviours. Sometimes, the only
(easy) way to verify if the feature is present is to run the test but
then the validation cannot determine if there is a failure with the
feature or if the feature is missing. Then it looks better to check the
kernel version instead of having tests that can never fail. In any case,
we need a solution not to have a whole selftest being marked as failed
just because one sub-test has failed.

Note that this env var car be set to 1 not to do such check and run the
linked sub-test: SELFTESTS_MPTCP_LIB_NO_KVERSION_CHECK.

This new helper is going to be used in the following commits. In order
to ease the backport of such future patches, it would be good if this
patch is backported up to the introduction of MPTCP selftests, hence the
Fixes tag below: this type of check was supposed to be done from the
beginning.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 048d19d444be ("mptcp: add basic kselftest for mptcp")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'fixes-for-q-usgmii-speeds-and-autoneg'

Maxime Chevallier says:

====================
fixes for Q-USGMII speeds and autoneg

This is the second version of a small changeset for QUSGMII support,
fixing inconsistencies in reported max speed and control word parsing.

As reported here [1], there are some inconsistencies for the Q-USGMII
mode speeds and configuration. The first patch in this fixup series
makes so that we correctly report the max speed of 1Gbps for this mode.

The second patch uses a dedicated helper to decode the control word.
This is necessary as although USGMII control words are close to USXGMII,
they don't support the same speeds.

[1] : https://lore.kernel.org/netdev/ZHnd+6FUO77XFJvQ@shell.armlinux.org.uk/
====================

Link: https://lore.kernel.org/r/20230609080305.546028-1-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: phylink: use a dedicated helper to parse usgmii control word

Q-USGMII is a derivative of USGMII, that uses a specific formatting for
the control word. The layout is close to the USXGMII control word, but
doesn't support speeds over 1Gbps. Use a dedicated decoding logic for
the USGMII control word, re-using USXGMII definitions but only considering
10/100/1000Mbps speeds

Fixes: 5e61fe157a27 ("net: phy: Introduce QUSGMII PHY mode")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: phylink: report correct max speed for QUSGMII

Q-USGMII is the quad port version of USGMII, and supports a max speed of
1Gbps on each line. Make so that phylink_interface_max_speed() reports
this information correctly.

Fixes: ae0e4bb2a0e0 ("net: phylink: Adjust link settings based on rate matching")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'mm-hotfixes-stable-2023-06-12-12-22' of git://git./linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
"19 hotfixes. 14 are cc:stable and the remainder address issues which
  were introduced during this development cycle or which were considered
  inappropriate for a backport"

* tag 'mm-hotfixes-stable-2023-06-12-12-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  zswap: do not shrink if cgroup may not zswap
  page cache: fix page_cache_next/prev_miss off by one
  ocfs2: check new file size on fallocate call
  mailmap: add entry for John Keeping
  mm/damon/core: fix divide error in damon_nr_accesses_to_accesses_bp()
  epoll: ep_autoremove_wake_function should use list_del_init_careful
  mm/gup_test: fix ioctl fail for compat task
  nilfs2: reject devices with insufficient block count
  ocfs2: fix use-after-free when unmounting read-only filesystem
  lib/test_vmalloc.c: avoid garbage in page array
  nilfs2: fix possible out-of-bounds segment allocation in resize ioctl
  riscv/purgatory: remove PGO flags
  powerpc/purgatory: remove PGO flags
  x86/purgatory: remove PGO flags
  kexec: support purgatories with .text.hot sections
  mm/uffd: allow vma to merge as much as possible
  mm/uffd: fix vma operation where start addr cuts part of vma
  radix-tree: move declarations to header
  nilfs2: fix incomplete buffer cleanup in nilfs_btnode_abort_change_key()

igb: fix nvm.ops.read() error handling

Add error handling into igb_set_eeprom() function, in case
nvm.ops.read() fails just quit with error code asap.

Fixes: 9d5c824399de ("igb: PCI-Express 82575 Gigabit Ethernet driver")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

igc: Fix possible system crash when loading module

Guarantee that when probe() is run again, PTM and PCI busmaster will be
in the same state as it was if the driver was never loaded.

Avoid an i225/i226 hardware issue that PTM requests can be made even
though PCI bus mastering is not enabled. These unexpected PTM requests
can crash some systems.

So, "force" disable PTM and busmastering before removing the driver,
so they can be re-enabled in the right order during probe(). This is
more like a workaround and should be applicable for i225 and i226, in
any platform.

Fixes: 1b5d73fb8624 ("igc: Enable PCIe PTM")
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

igc: Clean the TX buffer and TX descriptor ring

There could be a race condition during link down where interrupt
being generated and igc_clean_tx_irq() been called to perform the
TX completion. Properly clear the TX buffer/descriptor ring and
disable the TX Queue ring in igc_free_tx_resources() to avoid that.

Kernel trace:
[  108.237177] Hardware name: Intel Corporation Tiger Lake Client Platform/TigerLake U DDR4 SODIMM RVP, BIOS TGLIFUI1.R00.4204.A00.2105270302 05/27/2021
[  108.237178] RIP: 0010:refcount_warn_saturate+0x55/0x110
[  108.242143] RSP: 0018:ffff9e7980003db0 EFLAGS: 00010286
[  108.245555] Code: 84 bc 00 00 00 c3 cc cc cc cc 85 f6 74 46 80 3d 20 8c 4d 01 00 75 ee 48 c7 c7 88 f4 03 ab c6 05 10 8c 4d 01 01 e8 0b 10 96 ff <0f> 0b c3 cc cc cc cc 80 3d fc 8b 4d 01 00 75 cb 48 c7 c7 b0 f4 03
[  108.250434]
[  108.250434] RSP: 0018:ffff9e798125f910 EFLAGS: 00010286
[  108.254358] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[  108.259325]
[  108.259325] RAX: 0000000000000000 RBX: ffff8ddb935b8000 RCX: 0000000000000027
[  108.261868] RDX: ffff8de250a28800 RSI: ffff8de250a1c580 RDI: ffff8de250a1c580
[  108.265538] RDX: 0000000000000027 RSI: 0000000000000002 RDI: ffff8de250a9c588
[  108.265539] RBP: ffff8ddb935b8000 R08: ffffffffab2655a0 R09: ffff9e798125f898
[  108.267914] RBP: ffff8ddb8a5b8d80 R08: 0000005648eba354 R09: 0000000000000000
[  108.270196] R10: 0000000000000001 R11: 000000002d2d2d2d R12: ffff9e798125f948
[  108.270197] R13: ffff9e798125fa1c R14: ffff8ddb8a5b8d80 R15: 7fffffffffffffff
[  108.273001] R10: 000000002d2d2d2d R11: 000000002d2d2d2d R12: ffff8ddb8a5b8ed4
[  108.276410] FS:  00007f605851b740(0000) GS:ffff8de250a80000(0000) knlGS:0000000000000000
[  108.280597] R13: 00000000000002ac R14: 00000000ffffff99 R15: ffff8ddb92561b80
[  108.282966] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  108.282967] CR2: 00007f053c039248 CR3: 0000000185850003 CR4: 0000000000f70ee0
[  108.286206] FS:  0000000000000000(0000) GS:ffff8de250a00000(0000) knlGS:0000000000000000
[  108.289701] PKRU: 55555554
[  108.289702] Call Trace:
[  108.289704]  <TASK>
[  108.293977] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  108.297562]  sock_alloc_send_pskb+0x20c/0x240
[  108.301494] CR2: 00007f053c03a168 CR3: 0000000184394002 CR4: 0000000000f70ef0
[  108.301495] PKRU: 55555554
[  108.306464]  __ip_append_data.isra.0+0x96f/0x1040
[  108.309441] Call Trace:
[  108.309443]  ? __pfx_ip_generic_getfrag+0x10/0x10
[  108.314927]  <IRQ>
[  108.314928]  sock_wfree+0x1c7/0x1d0
[  108.318078]  ? __pfx_ip_generic_getfrag+0x10/0x10
[  108.320276]  skb_release_head_state+0x32/0x90
[  108.324812]  ip_make_skb+0xf6/0x130
[  108.327188]  skb_release_all+0x16/0x40
[  108.330775]  ? udp_sendmsg+0x9f3/0xcb0
[  108.332626]  napi_consume_skb+0x48/0xf0
[  108.334134]  ? xfrm_lookup_route+0x23/0xb0
[  108.344285]  igc_poll+0x787/0x1620 [igc]
[  108.346659]  udp_sendmsg+0x9f3/0xcb0
[  108.360010]  ? ttwu_do_activate+0x40/0x220
[  108.365237]  ? __pfx_ip_generic_getfrag+0x10/0x10
[  108.366744]  ? try_to_wake_up+0x289/0x5e0
[  108.376987]  ? sock_sendmsg+0x81/0x90
[  108.395698]  ? __pfx_process_timeout+0x10/0x10
[  108.395701]  sock_sendmsg+0x81/0x90
[  108.409052]  __napi_poll+0x29/0x1c0
[  108.414279]  ____sys_sendmsg+0x284/0x310
[  108.419507]  net_rx_action+0x257/0x2d0
[  108.438216]  ___sys_sendmsg+0x7c/0xc0
[  108.439723]  __do_softirq+0xc1/0x2a8
[  108.444950]  ? finish_task_switch+0xb4/0x2f0
[  108.452077]  irq_exit_rcu+0xa9/0xd0
[  108.453584]  ? __schedule+0x372/0xd00
[  108.460713]  common_interrupt+0x84/0xa0
[  108.467840]  ? clockevents_program_event+0x95/0x100
[  108.474968]  </IRQ>
[  108.482096]  ? do_nanosleep+0x88/0x130
[  108.489224]  <TASK>
[  108.489225]  asm_common_interrupt+0x26/0x40
[  108.496353]  ? __rseq_handle_notify_resume+0xa9/0x4f0
[  108.503478] RIP: 0010:cpu_idle_poll+0x2c/0x100
[  108.510607]  __sys_sendmsg+0x5d/0xb0
[  108.518687] Code: 05 e1 d9 c8 00 65 8b 15 de 64 85 55 85 c0 7f 57 e8 b9 ef ff ff fb 65 48 8b 1c 25 00 cc 02 00 48 8b 03 a8 08 74 0b eb 1c f3 90 <48> 8b 03 a8 08 75 13 8b 05 77 63 cd 00 85 c0 75 ed e8 ce ec ff ff
[  108.525817]  do_syscall_64+0x44/0xa0
[  108.531563] RSP: 0018:ffffffffab203e70 EFLAGS: 00000202
[  108.538693]  entry_SYSCALL_64_after_hwframe+0x72/0xdc
[  108.546775]
[  108.546777] RIP: 0033:0x7f605862b7f7
[  108.549495] RAX: 0000000000000001 RBX: ffffffffab20c940 RCX: 000000000000003b
[  108.551955] Code: 0e 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10
[  108.554068] RDX: 4000000000000000 RSI: 000000002da97f6a RDI: 00000000002b8ff4
[  108.559816] RSP: 002b:00007ffc99264058 EFLAGS: 00000246
[  108.564178] RBP: 0000000000000000 R08: 00000000002b8ff4 R09: ffff8ddb01554c80
[  108.571302]  ORIG_RAX: 000000000000002e
[  108.571303] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f605862b7f7
[  108.574023] R10: 000000000000015b R11: 000000000000000f R12: ffffffffab20c940
[  108.574024] R13: 0000000000000000 R14: ffff8de26fbeef40 R15: ffffffffab20c940
[  108.578727] RDX: 0000000000000000 RSI: 00007ffc992640a0 RDI: 0000000000000003
[  108.578728] RBP: 00007ffc99264110 R08: 0000000000000000 R09: 175f48ad1c3a9c00
[  108.581187]  do_idle+0x62/0x230
[  108.585890] R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffc992642d8
[  108.585891] R13: 00005577814ab2ba R14: 00005577814addf0 R15: 00007f605876d000
[  108.587920]  cpu_startup_entry+0x1d/0x20
[  108.591422]  </TASK>
[  108.596127]  rest_init+0xc5/0xd0
[  108.600490] ---[ end trace 0000000000000000 ]---

Test Setup:

DUT:
- Change mac address on DUT Side. Ensure NIC not having same MAC Address
- Running udp_tai on DUT side. Let udp_tai running throughout the test

Example:
./udp_tai -i enp170s0 -P 100000 -p 90 -c 1 -t 0 -u 30004

Host:
- Perform link up/down every 5 second.

Result:
Kernel panic will happen on DUT Side.

Fixes: 13b5b7fd6a4a ("igc: Add support for Tx/Rx rings")
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

zswap: do not shrink if cgroup may not zswap

Before storing a page, zswap first checks if the number of stored pages
exceeds the limit specified by memory.zswap.max, for each cgroup in the
hierarchy. If this limit is reached or exceeded, then zswap shrinking is
triggered and short-circuits the store attempt.

However, since the zswap's LRU is not memcg-aware, this can create the
following pathological behavior: the cgroup whose zswap limit is 0 will
evict pages from other cgroups continually, without lowering its own zswap
usage. This means the shrinking will continue until the need for swap
ceases or the pool becomes empty.

As a result of this, we observe a disproportionate amount of zswap
writeback and a perpetually small zswap pool in our experiments, even
though the pool limit is never hit.

More generally, a cgroup might unnecessarily evict pages from other
cgroups before we drive the memcg back below its limit.

This patch fixes the issue by rejecting zswap store attempt without
shrinking the pool when obj_cgroup_may_zswap() returns false.

[akpm@linux-foundation.org: fix return of unintialized value]
[akpm@linux-foundation.org: s/ENOSPC/ENOMEM/]
Link: https://lkml.kernel.org/r/20230530222440.2777700-1-nphamcs@gmail.com
Link: https://lkml.kernel.org/r/20230530232435.3097106-1-nphamcs@gmail.com
Fixes: f4840ccfca25 ("zswap: memcg accounting")
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

page cache: fix page_cache_next/prev_miss off by one

Ackerley Tng reported an issue with hugetlbfs fallocate here[1].  The
issue showed up after the conversion of hugetlb page cache lookup code to
use page_cache_next_miss.  Code in hugetlb fallocate, userfaultfd and GUP
is now using page_cache_next_miss to determine if a page is present the
page cache.  The following statement is used.

present = page_cache_next_miss(mapping, index, 1) != index;

There are two issues with page_cache_next_miss when used in this way.
1) If the passed value for index is equal to the 'wrap-around' value,
   the same index will always be returned.  This wrap-around value is 0,
   so 0 will be returned even if page is present at index 0.
2) If there is no gap in the range passed, the last index in the range
   will be returned.  When passed a range of 1 as above, the passed
   index value will be returned even if the page is present.
The end result is the statement above will NEVER indicate a page is
present in the cache, even if it is.

As noted by Ackerley in [1], users can see this by hugetlb fallocate
incorrectly returning EEXIST if pages are already present in the file.  In
addition, hugetlb pages will not be included in core dumps if they need to
be brought in via GUP.  userfaultfd UFFDIO_COPY also uses this code and
will not notice pages already present in the cache.  It may try to
allocate a new page and potentially return ENOMEM as opposed to EEXIST.

Both page_cache_next_miss and page_cache_prev_miss have similar issues.
Fix by:
- Check for index equal to 'wrap-around' value and do not exit early.
- If no gap is found in range, return index outside range.
- Update function description to say 'wrap-around' value could be
  returned if passed as index.

[1] https://lore.kernel.org/linux-mm/cover.1683069252.git.ackerleytng@google.com/

Link: https://lkml.kernel.org/r/20230602225747.103865-2-mike.kravetz@oracle.com
Fixes: d0ce0e47b323 ("mm/hugetlb: convert hugetlb fault paths to use alloc_hugetlb_folio()")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Ackerley Tng <ackerleytng@google.com>
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Tested-by: Ackerley Tng <ackerleytng@google.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Vishal Annapurve <vannapurve@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

ocfs2: check new file size on fallocate call

When changing a file size with fallocate() the new size isn't being
checked. In particular, the FSIZE ulimit isn't being checked, which makes
fstest generic/228 fail. Simply adding a call to inode_newsize_ok() fixes
this issue.

Link: https://lkml.kernel.org/r/20230529152645.32680-1-lhenriques@suse.de
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Mark Fasheh <mark@fasheh.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mailmap: add entry for John Keeping

Map my corporate address to my personal one, as I am leaving the
company.

Link: https://lkml.kernel.org/r/20230531144839.1157112-1-john@keeping.me.uk
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/damon/core: fix divide error in damon_nr_accesses_to_accesses_bp()

If 'aggr_interval' is smaller than 'sample_interval', max_nr_accesses in
damon_nr_accesses_to_accesses_bp() becomes zero which leads to divide
error, let's validate the values of them in damon_set_attrs() to fix it,
which similar to others attrs check.

Link: https://lkml.kernel.org/r/20230527032101.167788-1-wangkefeng.wang@huawei.com
Fixes: 2f5bef5a590b ("mm/damon/core: update monitoring results for new monitoring attributes")
Reported-by: syzbot+841a46899768ec7bec67@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=841a46899768ec7bec67
Link: https://lore.kernel.org/damon/00000000000055fc4e05fc975bc2@google.com/
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

epoll: ep_autoremove_wake_function should use list_del_init_careful

autoremove_wake_function uses list_del_init_careful, so should epoll's
more aggressive variant. It only doesn't because it was copied from an
older wait.c rather than the most recent.

[bsegall@google.com: add comment]
Link: https://lkml.kernel.org/r/xm26bki0ulsr.fsf_-_@google.com
Link: https://lkml.kernel.org/r/xm26pm6hvfer.fsf@google.com
Fixes: a16ceb139610 ("epoll: autoremove wakers even more aggressively")
Signed-off-by: Ben Segall <bsegall@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/gup_test: fix ioctl fail for compat task

When tools/testing/selftests/mm/gup_test.c is compiled as 32bit, then run
on arm64 kernel, it reports "ioctl: Inappropriate ioctl for device".

Fix it by filling compat_ioctl in gup_test_fops

Link: https://lkml.kernel.org/r/20230526022125.175728-1-haibo.li@mediatek.com
Signed-off-by: Haibo Li <haibo.li@mediatek.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

nilfs2: reject devices with insufficient block count

The current sanity check for nilfs2 geometry information lacks checks for
the number of segments stored in superblocks, so even for device images
that have been destructively truncated or have an unusually high number of
segments, the mount operation may succeed.

This causes out-of-bounds block I/O on file system block reads or log
writes to the segments, the latter in particular causing
"a_ops->writepages" to repeatedly fail, resulting in sync_inodes_sb() to
hang.

Fix this issue by checking the number of segments stored in the superblock
and avoiding mounting devices that can cause out-of-bounds accesses. To
eliminate the possibility of overflow when calculating the number of
blocks required for the device from the number of segments, this also adds
a helper function to calculate the upper bound on the number of segments
and inserts a check using it.

Link: https://lkml.kernel.org/r/20230526021332.3431-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+7d50f1e54a12ba3aeae2@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=7d50f1e54a12ba3aeae2
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

ocfs2: fix use-after-free when unmounting read-only filesystem

It's trivial to trigger a use-after-free bug in the ocfs2 quotas code using
fstest generic/452. After a read-only remount, quotas are suspended and
ocfs2_mem_dqinfo is freed through ->ocfs2_local_free_info(). When unmounting
the filesystem, an UAF access to the oinfo will eventually cause a crash.

BUG: KASAN: slab-use-after-free in timer_delete+0x54/0xc0
Read of size 8 at addr ffff8880389a8208 by task umount/669
...
Call Trace:
<TASK>
...
timer_delete+0x54/0xc0
try_to_grab_pending+0x31/0x230
__cancel_work_timer+0x6c/0x270
ocfs2_disable_quotas.isra.0+0x3e/0xf0 [ocfs2]
ocfs2_dismount_volume+0xdd/0x450 [ocfs2]
generic_shutdown_super+0xaa/0x280
kill_block_super+0x46/0x70
deactivate_locked_super+0x4d/0xb0
cleanup_mnt+0x135/0x1f0
...
</TASK>

Allocated by task 632:
kasan_save_stack+0x1c/0x40
kasan_set_track+0x21/0x30
__kasan_kmalloc+0x8b/0x90
ocfs2_local_read_info+0xe3/0x9a0 [ocfs2]
dquot_load_quota_sb+0x34b/0x680
dquot_load_quota_inode+0xfe/0x1a0
ocfs2_enable_quotas+0x190/0x2f0 [ocfs2]
ocfs2_fill_super+0x14ef/0x2120 [ocfs2]
mount_bdev+0x1be/0x200
legacy_get_tree+0x6c/0xb0
vfs_get_tree+0x3e/0x110
path_mount+0xa90/0xe10
__x64_sys_mount+0x16f/0x1a0
do_syscall_64+0x43/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc

Freed by task 650:
kasan_save_stack+0x1c/0x40
kasan_set_track+0x21/0x30
kasan_save_free_info+0x2a/0x50
__kasan_slab_free+0xf9/0x150
__kmem_cache_free+0x89/0x180
ocfs2_local_free_info+0x2ba/0x3f0 [ocfs2]
dquot_disable+0x35f/0xa70
ocfs2_susp_quotas.isra.0+0x159/0x1a0 [ocfs2]
ocfs2_remount+0x150/0x580 [ocfs2]
reconfigure_super+0x1a5/0x3a0
path_mount+0xc8a/0xe10
__x64_sys_mount+0x16f/0x1a0
do_syscall_64+0x43/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc

Link: https://lkml.kernel.org/r/20230522102112.9031-1-lhenriques@suse.de
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Tested-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

lib/test_vmalloc.c: avoid garbage in page array

It turns out that alloc_pages_bulk_array() does not treat the page_array
parameter as an output parameter, but rather reads the array and skips any
entries that have already been allocated.

This is somewhat unexpected and breaks this test, as we allocate the pages
array uninitialised on the assumption it will be overwritten.

As a result, the test was referencing uninitialised data and causing the
PFN to not be valid and thus a WARN_ON() followed by a null pointer deref
and panic.

In addition, this is an array of pointers not of struct page objects, so we
need only allocate an array with elements of pointer size.

We solve both problems by simply using kcalloc() and referencing
sizeof(struct page *) rather than sizeof(struct page).

Link: https://lkml.kernel.org/r/20230524082424.10022-1-lstoakes@gmail.com
Fixes: 869cb29a61a1 ("lib/test_vmalloc.c: add vm_map_ram()/vm_unmap_ram() test case")
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

nilfs2: fix possible out-of-bounds segment allocation in resize ioctl

Syzbot reports that in its stress test for resize ioctl, the log writing
function nilfs_segctor_do_construct hits a WARN_ON in
nilfs_segctor_truncate_segments().

It turned out that there is a problem with the current implementation of
the resize ioctl, which changes the writable range on the device (the
range of allocatable segments) at the end of the resize process.

This order is necessary for file system expansion to avoid corrupting the
superblock at trailing edge. However, in the case of a file system
shrink, if log writes occur after truncating out-of-bounds trailing
segments and before the resize is complete, segments may be allocated from
the truncated space.

The userspace resize tool was fine as it limits the range of allocatable
segments before performing the resize, but it can run into this issue if
the resize ioctl is called alone.

Fix this issue by changing nilfs_sufile_resize() to update the range of
allocatable segments immediately after successful truncation of segment
space in case of file system shrink.

Link: https://lkml.kernel.org/r/20230524094348.3784-1-konishi.ryusuke@gmail.com
Fixes: 4e33f9eab07e ("nilfs2: implement resize ioctl")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+33494cd0df2ec2931851@syzkaller.appspotmail.com
Closes: https://lkml.kernel.org/r/0000000000005434c405fbbafdc5@google.com
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

riscv/purgatory: remove PGO flags

If profile-guided optimization is enabled, the purgatory ends up with
multiple .text sections. This is not supported by kexec and crashes the
system.

Link: https://lkml.kernel.org/r/20230321-kexec_clang16-v7-4-b05c520b7296@chromium.org
Fixes: 930457057abe ("kernel/kexec_file.c: split up __kexec_load_puragory")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Cc: <stable@vger.kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Philipp Rudo <prudo@redhat.com>
Cc: Ross Zwisler <zwisler@google.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Rix <trix@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

powerpc/purgatory: remove PGO flags

If profile-guided optimization is enabled, the purgatory ends up with
multiple .text sections. This is not supported by kexec and crashes the
system.

Link: https://lkml.kernel.org/r/20230321-kexec_clang16-v7-3-b05c520b7296@chromium.org
Fixes: 930457057abe ("kernel/kexec_file.c: split up __kexec_load_puragory")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: <stable@vger.kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Philipp Rudo <prudo@redhat.com>
Cc: Ross Zwisler <zwisler@google.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Rix <trix@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

x86/purgatory: remove PGO flags

If profile-guided optimization is enabled, the purgatory ends up with
multiple .text sections. This is not supported by kexec and crashes the
system.

Link: https://lkml.kernel.org/r/20230321-kexec_clang16-v7-2-b05c520b7296@chromium.org
Fixes: 930457057abe ("kernel/kexec_file.c: split up __kexec_load_puragory")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Cc: <stable@vger.kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Philipp Rudo <prudo@redhat.com>
Cc: Ross Zwisler <zwisler@google.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Rix <trix@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

kexec: support purgatories with .text.hot sections

Patch series "kexec: Fix kexec_file_load for llvm16 with PGO", v7.

When upreving llvm I realised that kexec stopped working on my test
platform.

The reason seems to be that due to PGO there are multiple .text sections
on the purgatory, and kexec does not supports that.

This patch (of 4):

Clang16 links the purgatory text in two sections when PGO is in use:

  [ 1] .text             PROGBITS         0000000000000000  00000040
       00000000000011a1  0000000000000000  AX       0     0     16
  [ 2] .rela.text        RELA             0000000000000000  00003498
       0000000000000648  0000000000000018   I      24     1     8
  ...
  [17] .text.hot.        PROGBITS         0000000000000000  00003220
       000000000000020b  0000000000000000  AX       0     0     1
  [18] .rela.text.hot.   RELA             0000000000000000  00004428
       0000000000000078  0000000000000018   I      24    17     8

And both of them have their range [sh_addr ... sh_addr+sh_size] on the
area pointed by `e_entry`.

This causes that image->start is calculated twice, once for .text and
another time for .text.hot. The second calculation leaves image->start
in a random location.

Because of this, the system crashes immediately after:

kexec_core: Starting new kernel

Link: https://lkml.kernel.org/r/20230321-kexec_clang16-v7-0-b05c520b7296@chromium.org
Link: https://lkml.kernel.org/r/20230321-kexec_clang16-v7-1-b05c520b7296@chromium.org
Fixes: 930457057abe ("kernel/kexec_file.c: split up __kexec_load_puragory")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Ross Zwisler <zwisler@google.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Rix <trix@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/uffd: allow vma to merge as much as possible

We used to not pass in the pgoff correctly when register/unregister uffd
regions, it caused incorrect behavior on vma merging and can cause
mergeable vmas being separate after ioctls return.

For example, when we have:

  vma1(range 0-9, with uffd), vma2(range 10-19, no uffd)

Then someone unregisters uffd on range (5-9), it should logically become:

  vma1(range 0-4, with uffd), vma2(range 5-19, no uffd)

But with current code we'll have:

  vma1(range 0-4, with uffd), vma3(range 5-9, no uffd), vma2(range 10-19, no uffd)

This patch allows such merge to happen correctly before ioctl returns.

This behavior seems to have existed since the 1st day of uffd.  Since
pgoff for vma_merge() is only used to identify the possibility of vma
merging, meanwhile here what we did was always passing in a pgoff smaller
than what we should, so there should have no other side effect besides not
merging it.  Let's still tentatively copy stable for this, even though I
don't see anything will go wrong besides vma being split (which is mostly
not user visible).

Link: https://lkml.kernel.org/r/20230517190916.3429499-3-peterx@redhat.com
Fixes: 86039bd3b4e6 ("userfaultfd: add new syscall to provide memory externalization")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reported-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/uffd: fix vma operation where start addr cuts part of vma

Patch series "mm/uffd: Fix vma merge/split", v2.

This series contains two patches that fix vma merge/split for userfaultfd
on two separate issues.

Patch 1 fixes a regression since 6.1+ due to something we overlooked when
converting to maple tree apis.  The plan is we use patch 1 to replace the
commit "2f628010799e (mm: userfaultfd: avoid passing an invalid range to
vma_merge())" in mm-hostfixes-unstable tree if possible, so as to bring
uffd vma operations back aligned with the rest code again.

Patch 2 fixes a long standing issue that vma can be left unmerged even if
we can for either uffd register or unregister.

Many thanks to Lorenzo on either noticing this issue from the assert
movement patch, looking at this problem, and also provided a reproducer on
the unmerged vma issue [1].

[1] https://gist.github.com/lorenzo-stoakes/a11a10f5f479e7a977fc456331266e0e

This patch (of 2):

It seems vma merging with uffd paths is broken with either
register/unregister, where right now we can feed wrong parameters to
vma_merge() and it's found by recent patch which moved asserts upwards in
vma_merge() by Lorenzo Stoakes:

https://lore.kernel.org/all/ZFunF7DmMdK05MoF@FVFF77S0Q05N.cambridge.arm.com/

It's possible that "start" is contained within vma but not clamped to its
start.  We need to convert this into either "cannot merge" case or "can
merge" case 4 which permits subdivision of prev by assigning vma to prev.
As we loop, each subsequent VMA will be clamped to the start.

This patch will eliminate the report and make sure vma_merge() calls will
become legal again.

One thing to mention is that the "Fixes: 29417d292bd0" below is there only
to help explain where the warning can start to trigger, the real commit to
fix should be 69dbe6daf104.  Commit 29417d292bd0 helps us to identify the
issue, but unfortunately we may want to keep it in Fixes too just to ease
kernel backporters for easier tracking.

Link: https://lkml.kernel.org/r/20230517190916.3429499-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20230517190916.3429499-2-peterx@redhat.com
Fixes: 69dbe6daf104 ("userfaultfd: use maple tree iterator to iterate VMAs")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reported-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Closes: https://lore.kernel.org/all/ZFunF7DmMdK05MoF@FVFF77S0Q05N.cambridge.arm.com/
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

radix-tree: move declarations to header

The xarray.c file contains the only call to radix_tree_node_rcu_free(),
and it comes with its own extern declaration for it. This means the
function definition causes a missing-prototype warning:

lib/radix-tree.c:288:6: error: no previous prototype for 'radix_tree_node_rcu_free' [-Werror=missing-prototypes]

Instead, move the declaration for this function to a new header that can
be included by both, and do the same for the radix_tree_node_cachep
variable that has the same underlying problem but does not cause a warning
with gcc.

[zhangpeng.00@bytedance.com: fix building radix tree test suite]
Link: https://lkml.kernel.org/r/20230521095450.21332-1-zhangpeng.00@bytedance.com
Link: https://lkml.kernel.org/r/20230516194212.548910-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

nilfs2: fix incomplete buffer cleanup in nilfs_btnode_abort_change_key()

A syzbot fault injection test reported that nilfs_btnode_create_block, a
helper function that allocates a new node block for b-trees, causes a
kernel BUG for disk images where the file system block size is smaller
than the page size.

This was due to unexpected flags on the newly allocated buffer head, and
it turned out to be because the buffer flags were not cleared by
nilfs_btnode_abort_change_key() after an error occurred during a b-tree
update operation and the buffer was later reused in that state.

Fix this issue by using nilfs_btnode_delete() to abandon the unused
preallocated buffer in nilfs_btnode_abort_change_key().

Link: https://lkml.kernel.org/r/20230513102428.10223-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+b0a35a5c1f7e846d3b09@syzkaller.appspotmail.com
Closes: https://lkml.kernel.org/r/000000000000d1d6c205ebc4d512@google.com
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

io_uring/io-wq: don't clear PF_IO_WORKER on exit

A recent commit gated the core dumping task exit logic on current->flags
remaining consistent in terms of PF_{IO,USER}_WORKER at task exit time.
This exposed a problem with the io-wq handling of that, which explicitly
clears PF_IO_WORKER before calling do_exit().

The reasons for this manual clear of PF_IO_WORKER is historical, where
io-wq used to potentially trigger a sleep on exit. As the io-wq thread
is exiting, it should not participate any further accounting. But these
days we don't need to rely on current->flags anymore, so we can safely
remove the PF_IO_WORKER clearing.

Reported-by: Zorro Lang <zlang@redhat.com>
Reported-by: Dave Chinner <david@fromorbit.com>
Link: https://lore.kernel.org/all/ZIZSPyzReZkGBEFy@dread.disaster.area/
Fixes: f9010dbdce91 ("fork, vhost: Use CLONE_THREAD to fix freezer/ps regression")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'for-6.4-rc6-tag' of git://git./linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:
"A  more fixes and regression fixes:

   - in subpage mode, fix crash when repairing metadata at the end of
     a stripe

   - properly enable async discard when remounting from read-only to
     read-write

   - scrub regression fixes:
      - respect read-only scrub when attempting to do a repair
      - fix reporting of found errors, the stats don't get properly
        accounted after a stripe repair"

* tag 'for-6.4-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: scrub: also report errors hit during the initial read
  btrfs: scrub: respect the read-only flag during repair
  btrfs: properly enable async discard when switching from RO->RW
  btrfs: subpage: fix a crash in metadata repair path

sctp: fix an error code in sctp_sf_eat_auth()

The sctp_sf_eat_auth() function is supposed to enum sctp_disposition
values and returning a kernel error code will cause issues in the
caller. Change -ENOMEM to SCTP_DISPOSITION_NOMEM.

Fixes: 65b07e5d0d09 ("[SCTP]: API updates to suport SCTP-AUTH extensions.")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: handle invalid error codes without calling BUG()

The sctp_sf_eat_auth() function is supposed to return enum sctp_disposition
values but if the call to sctp_ulpevent_make_authkey() fails, it returns
-ENOMEM.

This results in calling BUG() inside the sctp_side_effects() function.
Calling BUG() is an over reaction and not helpful. Call WARN_ON_ONCE()
instead.

This code predates git.

Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipvlan: fix bound dev checking for IPv6 l3s mode

The commit 59a0b022aa24 ("ipvlan: Make skb->skb_iif track skb->dev for l3s
mode") fixed ipvlan bonded dev checking by updating skb skb_iif. This fix
works for IPv4, as in raw_v4_input() the dif is from inet_iif(skb), which
is skb->skb_iif when there is no route.

But for IPv6, the fix is not enough, because in ipv6_raw_deliver() ->
raw_v6_match(), the dif is inet6_iif(skb), which is returns IP6CB(skb)->iif
instead of skb->skb_iif if it's not a l3_slave. To fix the IPv6 part
issue. Let's set IP6CB(skb)->iif to correct ifindex.

BTW, ipvlan handles NS/NA specifically. Since it works fine, I will not
reset IP6CB(skb)->iif when addr->atype is IPVL_ICMPV6.

Fixes: c675e06a98a4 ("ipvlan: decouple l3s mode dependencies from other modes")
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2196710
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

wifi: mac80211: fragment per STA profile correctly

When fragmenting the ML per STA profile, the element ID should be
IEEE80211_MLE_SUBELEM_PER_STA_PROFILE rather than WLAN_EID_FRAGMENT.

Change the helper function to take the to be used element ID and pass
the appropriate value for each of the fragmentation levels.

Fixes: 81151ce462e5 ("wifi: mac80211: support MLO authentication/association with one link")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230611121219.9b5c793d904b.I7dad952bea8e555e2f3139fbd415d0cd2b3a08c3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

net: ethtool: correct MAX attribute value for stats

When compiling YNL generated code compiler complains about
array-initializer-out-of-bounds. Turns out the MAX value
for STATS_GRP uses the value for STATS.

This may lead to random corruptions in user space (kernel
itself doesn't use this value as it never parses stats).

Fixes: f09ea6fb1272 ("ethtool: add a new command for reading standard stats")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

cifs: fix max_credits implementation

The current implementation of max_credits on the client does
not work because the CreditRequest logic for several commands
does not take max_credits into account.

Still, we can end up asking the server for more credits, depending
on the number of credits in flight. For this, we need to
limit the credits while parsing the responses too.

Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

cifs: fix sockaddr comparison in iface_cmp

iface_cmp used to simply do a memcmp of the two
provided struct sockaddrs. The comparison needs to do more
based on the address family. Similar logic was already
present in cifs_match_ipaddr. Doing something similar now.

Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

smb/client: print "Unknown" instead of bogus link speed value

The virtio driver for Linux guests will not set a link speed to its
paravirtualized NICs. This will be seen as -1 in the ethernet layer, and
when some servers (e.g. samba) fetches it, it's converted to an unsigned
value (and multiplied by 1000 * 1000), so in client side we end up with:

1) Speed: 4294967295000000 bps

in DebugData.

This patch introduces a helper that returns a speed string (in Mbps or
Gbps) if interface speed is valid (>= SPEED_10 and <= SPEED_800000), or
"Unknown" otherwise.

The reason to not change the value in iface->speed is because we don't
know the real speed of the HW backing the server NIC, so let's keep
considering these as the fastest NICs available.

Also print "Capabilities: None" when the interface doesn't support any.

Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

cifs: print all credit counters in DebugData

Output of /proc/fs/cifs/DebugData shows only the per-connection
counter for the number of credits of regular type. i.e. the
credits reserved for echo and oplocks are not displayed.

There have been situations recently where having this info
would have been useful. This change prints the credit counters
of all three types: regular, echo, oplocks.

Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

cifs: fix status checks in cifs_tree_connect

The ordering of status checks at the beginning of
cifs_tree_connect is wrong. As a result, a tcon
which is good may stay marked as needing reconnect
infinitely.

Fixes: 2f0e4f034220 ("cifs: check only tcon status on tcon related functions")
Cc: stable@vger.kernel.org # 6.3
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

smb: remove obsolete comment

Because do_gettimeofday has been removed and replaced by ktime_get_real_ts64,
So just remove the comment as it's not needed now.

Signed-off-by: 鑫华 <jixianghua@xfusion.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Linux 6.4-rc6

IB/isert: Fix incorrect release of isert connection

The ib_isert module is releasing the isert connection both in
isert_wait_conn() handler as well as isert_free_conn() handler.
In isert_wait_conn() handler, it is expected to wait for iSCSI
session logout operation to complete. It should free the isert
connection only in isert_free_conn() handler.

When a bunch of iSER target is cleared, this issue can lead to
use-after-free memory issue as isert conn is twice released

Fixes: b02efbfc9a05 ("iser-target: Fix implicit termination of connections")
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/20230606102531.162967-4-saravanan.vajravel@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>

IB/isert: Fix possible list corruption in CMA handler

When ib_isert module receives connection error event, it is
releasing the isert session and removes corresponding list
node but it doesn't take appropriate mutex lock to remove
the list node. This can lead to linked list corruption

Fixes: bd3792205aae ("iser-target: Fix pending connections handling in target stack shutdown sequnce")
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Link: https://lore.kernel.org/r/20230606102531.162967-3-saravanan.vajravel@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>

IB/isert: Fix dead lock in ib_isert

- When a iSER session is released, ib_isert module is taking a mutex
  lock and releasing all pending connections. As part of this, ib_isert
  is destroying rdma cm_id. To destroy cm_id, rdma_cm module is sending
  CM events to CMA handler of ib_isert. This handler is taking same
  mutex lock. Hence it leads to deadlock between ib_isert & rdma_cm
  modules.

- For fix, created local list of pending connections and release the
  connection outside of mutex lock.

Calltrace:
---------
[ 1229.791410] INFO: task kworker/10:1:642 blocked for more than 120 seconds.
[ 1229.791416]       Tainted: G           OE    --------- -  - 4.18.0-372.9.1.el8.x86_64 #1
[ 1229.791418] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1229.791419] task:kworker/10:1    state:D stack:    0 pid:  642 ppid:     2 flags:0x80004000
[ 1229.791424] Workqueue: ib_cm cm_work_handler [ib_cm]
[ 1229.791436] Call Trace:
[ 1229.791438]  __schedule+0x2d1/0x830
[ 1229.791445]  ? select_idle_sibling+0x23/0x6f0
[ 1229.791449]  schedule+0x35/0xa0
[ 1229.791451]  schedule_preempt_disabled+0xa/0x10
[ 1229.791453]  __mutex_lock.isra.7+0x310/0x420
[ 1229.791456]  ? select_task_rq_fair+0x351/0x990
[ 1229.791459]  isert_cma_handler+0x224/0x330 [ib_isert]
[ 1229.791463]  ? ttwu_queue_wakelist+0x159/0x170
[ 1229.791466]  cma_cm_event_handler+0x25/0xd0 [rdma_cm]
[ 1229.791474]  cma_ib_handler+0xa7/0x2e0 [rdma_cm]
[ 1229.791478]  cm_process_work+0x22/0xf0 [ib_cm]
[ 1229.791483]  cm_work_handler+0xf4/0xf30 [ib_cm]
[ 1229.791487]  ? move_linked_works+0x6e/0xa0
[ 1229.791490]  process_one_work+0x1a7/0x360
[ 1229.791491]  ? create_worker+0x1a0/0x1a0
[ 1229.791493]  worker_thread+0x30/0x390
[ 1229.791494]  ? create_worker+0x1a0/0x1a0
[ 1229.791495]  kthread+0x10a/0x120
[ 1229.791497]  ? set_kthread_struct+0x40/0x40
[ 1229.791499]  ret_from_fork+0x1f/0x40

[ 1229.791739] INFO: task targetcli:28666 blocked for more than 120 seconds.
[ 1229.791740]       Tainted: G           OE    --------- -  - 4.18.0-372.9.1.el8.x86_64 #1
[ 1229.791741] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1229.791742] task:targetcli       state:D stack:    0 pid:28666 ppid:  5510 flags:0x00004080
[ 1229.791743] Call Trace:
[ 1229.791744]  __schedule+0x2d1/0x830
[ 1229.791746]  schedule+0x35/0xa0
[ 1229.791748]  schedule_preempt_disabled+0xa/0x10
[ 1229.791749]  __mutex_lock.isra.7+0x310/0x420
[ 1229.791751]  rdma_destroy_id+0x15/0x20 [rdma_cm]
[ 1229.791755]  isert_connect_release+0x115/0x130 [ib_isert]
[ 1229.791757]  isert_free_np+0x87/0x140 [ib_isert]
[ 1229.791761]  iscsit_del_np+0x74/0x120 [iscsi_target_mod]
[ 1229.791776]  lio_target_np_driver_store+0xe9/0x140 [iscsi_target_mod]
[ 1229.791784]  configfs_write_file+0xb2/0x110
[ 1229.791788]  vfs_write+0xa5/0x1a0
[ 1229.791792]  ksys_write+0x4f/0xb0
[ 1229.791794]  do_syscall_64+0x5b/0x1a0
[ 1229.791798]  entry_SYSCALL_64_after_hwframe+0x65/0xca

Fixes: bd3792205aae ("iser-target: Fix pending connections handling in target stack shutdown sequnce")
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Link: https://lore.kernel.org/r/20230606102531.162967-2-saravanan.vajravel@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>

Merge tag 'x86_urgent_for_v6.4_rc6' of git://git./linux/kernel/git/tip/tip

Pull x86 fix from Borislav Petkov:

- Set up the kernel CS earlier in the boot process in case EFI boots
   the kernel after bypassing the decompressor and the CS descriptor
   used ends up being the EFI one which is not mapped in the identity
   page table, leading to early SEV/SNP guest communication exceptions
   resulting in the guest crashing

* tag 'x86_urgent_for_v6.4_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/head/64: Switch to KERNEL_CS as soon as new GDT is installed

Merge tag '6.4-rc5-smb3-server-fixes' of git://git.samba.org/ksmbd

Pull smb server fixes from Steve French:
"Five smb3 server fixes, all also for stable:

   - Fix four slab out of bounds warnings: improve checks for protocol
     id, and for small packet length, and for create context parsing,
     and for negotiate context parsing

   - Fix for incorrect dereferencing POSIX ACLs"

* tag '6.4-rc5-smb3-server-fixes' of git://git.samba.org/ksmbd:
  ksmbd: validate smb request protocol id
  ksmbd: check the validation of pdu_size in ksmbd_conn_handler_loop
  ksmbd: fix posix_acls and acls dereferencing possible ERR_PTR()
  ksmbd: fix out-of-bound read in parse_lease_state()
  ksmbd: fix out-of-bound read in deassemble_neg_contexts()

RDMA/mlx5: Fix affinity assignment

The cited commit aimed to ensure that Virtual Functions (VFs) assign a
queue affinity to a Queue Pair (QP) to distribute traffic when
the LAG master creates a hardware LAG. If the affinity was set while
the hardware was not in LAG, the firmware would ignore the affinity value.

However, this commit unintentionally assigned an affinity to QPs on the LAG
master's VPORT even if the RDMA device was not marked as LAG-enabled.
In most cases, this was not an issue because when the hardware entered
hardware LAG configuration, the RDMA device of the LAG master would be
destroyed and a new one would be created, marked as LAG-enabled.

The problem arises when a user configures Equal-Cost Multipath (ECMP).
In ECMP mode, traffic can be directed to different physical ports based on
the queue affinity, which is intended for use by VPORTS other than the
E-Switch manager. ECMP mode is supported only if both E-Switch managers are
in switchdev mode and the appropriate route is configured via IP. In this
configuration, the RDMA device is not destroyed, and we retain the RDMA
device that is not marked as LAG-enabled.

To ensure correct behavior, Send Queues (SQs) opened by the E-Switch
manager through verbs should be assigned strict affinity. This means they
will only be able to communicate through the native physical port
associated with the E-Switch manager. This will prevent the firmware from
assigning affinity and will not allow the SQs to be remapped in case of
failover.

Fixes: 802dcc7fc5ec ("RDMA/mlx5: Support TX port affinity for VF drivers in LAG mode")
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://lore.kernel.org/r/425b05f4da840bc684b0f7e8ebf61aeb5cef09b0.1685960567.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>

IB/uverbs: Fix to consider event queue closing also upon non-blocking mode

Fix ib_uverbs_event_read() to consider event queue closing also upon
non-blocking mode.

Once the queue is closed (e.g. hot-plug flow) all the existing events
are cleaned-up as part of ib_uverbs_free_event_queue().

An application that uses the non-blocking FD mode should get -EIO in
that case to let it knows that the device was removed already.

Otherwise, it can loose the indication that the device was removed and
won't recover.

As part of that, refactor the code to have a single flow with regards to
'is_closed' for both blocking and non-blocking modes.

Fixes: 14e23bd6d221 ("RDMA/core: Fix locking in ib_uverbs_event_read")
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/97b00116a1e1e13f8dc4ec38a5ea81cf8c030210.1685960567.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>

RDMA/uverbs: Restrict usage of privileged QKEYs

According to the IB specification rel-1.6, section 3.5.3:
"QKEYs with the most significant bit set are considered controlled
QKEYs, and a HCA does not allow a consumer to arbitrarily specify a
controlled QKEY."

Thus, block non-privileged users from setting such a QKEY.

Cc: stable@vger.kernel.org
Fixes: bc38a6abdd5a ("[PATCH] IB uverbs: core implementation")
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://lore.kernel.org/r/c00c809ddafaaf87d6f6cb827978670989a511b3.1685960567.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>

RDMA/cma: Always set static rate to 0 for RoCE

Set static rate to 0 as it should be discovered by path query and
has no meaning for RoCE.
This also avoid of using the rtnl lock and ethtool API, which is
a bottleneck when try to setup many rdma-cm connections at the same
time, especially with multiple processes.

Fixes: 3c86aa70bf67 ("RDMA/cm: Add RDMA CM support for IBoE devices")
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/f72a4f8b667b803aee9fa794069f61afb5839ce4.1685960567.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>

RDMA/mlx5: Fix Q-counters query in LAG mode

Previously we used the core device associated to the IB device in order
to do the Q-counters query to the FW, but in LAG mode it is possible
that the core device isn't the one that created this VF.

Hence instead of using the core device to query the Q-counters
we use the ESW core device which is guaranteed to be that of the VF.

Fixes: d22467a71ebe ("RDMA/mlx5: Expand switchdev Q-counters to expose representor statistics")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/778d7d7a24892348d0bdef17d2e5f9e044717e86.1685960567.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>

RDMA/mlx5: Remove vport Q-counters dependency on normal Q-counters

Previously the Q-counters initialization assumed that the vport Q-counters
structures and the normal Q-counters structures are identical in size,
and hence when a Q-counter was added to normal Q-counters structure but
not to the vport Q-counters struct it would lead to that counter name
being NULL in switchdev mode, which could cause the kernel crash below.

Currently break the dependency between those two structure and always
use the appropriate struct size, in order to remove the assumption
that both structure sizes are equal.

BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 20c64a067 P4D 20c64a067 PUD 20152b067 PMD 0
Oops: 0000 [#1] SMP
CPU: 19 PID: 11717 Comm: devlink Tainted: G           OE      6.2.0_mlnx #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:strlen+0x0/0x20
Code: 66 2e 0f 1f 84 00 00 00 00 00 48 01 fe eb 0f 0f b6 07 38 d0 74 10 48 83 c7 01 84 c0 74 05 48 39 f7 75 ec 31 c0 c3 48 89 f8 c3 <80> 3f 00 48 89 f8 74 10 48 83 c7 01 80 3f 00 75 f7 48 29 c7 48 89
RSP: 0018:ffffc9000318b618 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000002c00
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000000 R08: ffff888211918110 R09: ffff888211918000
R10: 000000000000001e R11: ffff888211918000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: ffff8881038ec250
FS:  00007fa53342fe80(0000) GS:ffff88885fcc0000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000002042b2003 CR4: 0000000000770ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
  <TASK>
  kernfs_name_hash+0x12/0x80
  kernfs_find_ns+0x35/0xb0
  kernfs_remove_by_name_ns+0x46/0xc0
  remove_files.isra.1+0x30/0x70
  internal_create_group+0x253/0x380
  internal_create_groups.part.4+0x3e/0xa0
  setup_port+0x27a/0x8c0 [ib_core]
  ib_setup_port_attrs+0x9d/0x300 [ib_core]
  ib_register_device+0x48e/0x550 [ib_core]
  __mlx5_ib_add+0x2b/0x80 [mlx5_ib]
  mlx5_ib_vport_rep_load+0x141/0x360 [mlx5_ib]
  mlx5_esw_offloads_rep_load+0x48/0xa0 [mlx5_core]
  esw_offloads_enable+0x41e/0xd10 [mlx5_core]
  mlx5_eswitch_enable_locked+0x1e3/0x340 [mlx5_core]
  ? __cond_resched+0x15/0x30
  mlx5_devlink_eswitch_mode_set+0x204/0x3c0 [mlx5_core]
  devlink_nl_cmd_eswitch_set_doit+0x8d/0x100
  genl_family_rcv_msg_doit.isra.19+0xea/0x110
  genl_rcv_msg+0x19b/0x290
  ? devlink_nl_cmd_region_read_dumpit+0x760/0x760
  ? devlink_nl_cmd_port_param_get_doit+0x30/0x30
  ? devlink_put+0x50/0x50
  ? genl_get_cmd_both+0x60/0x60
  netlink_rcv_skb+0x54/0x100
  genl_rcv+0x24/0x40
  netlink_unicast+0x1be/0x2a0
  netlink_sendmsg+0x361/0x4d0
  sock_sendmsg+0x30/0x40
  __sys_sendto+0x11a/0x150
  ? handle_mm_fault+0x101/0x2b0
  ? do_user_addr_fault+0x21d/0x720
  __x64_sys_sendto+0x24/0x30
  do_syscall_64+0x34/0x80
  entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7fa533611cba
Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 76 c3 0f 1f 44 00 00 55 48 83 ec 30 44 89 4c
RSP: 002b:00007ffdb6a898a8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000daab00 RCX: 00007fa533611cba
RDX: 0000000000000038 RSI: 0000000000daab00 RDI: 0000000000000003
RBP: 0000000000daa910 R08: 00007fa533822000 R09: 000000000000000c
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000001
  </TASK>
Modules linked in: rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) mlx5_ib(OE) mlx5_core(OE) mlxdevm(OE) ib_uverbs(OE) ib_core(OE) mlx_compat(OE) mlxfw(OE) memtrack(OE) pci_hyperv_intf nfsv3 nfs_acl rpcsec_gss_krb5 auth_rpcgss nfsv4 xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_filter iptable_nat dns_resolver nf_nat br_netfilter nfs bridge stp llc lockd grace fscache netfs rfkill overlay iTCO_wdt iTCO_vendor_support kvm_intel kvm irqbypass crc32_pclmul ghash_clmulni_intel i2c_i801 sunrpc lpc_ich sha512_ssse3 pcspkr i2c_smbus mfd_core drm sch_fq_codel i2c_core ip_tables fuse crc32c_intel serio_raw virtio_net net_failover failover [last unloaded: mlxfw]
CR2: 0000000000000000
---[ end trace 0000000000000000 ]---
RIP: 0010:strlen+0x0/0x20
Code: 66 2e 0f 1f 84 00 00 00 00 00 48 01 fe eb 0f 0f b6 07 38 d0 74 10 48 83 c7 01 84 c0 74 05 48 39 f7 75 ec 31 c0 c3 48 89 f8 c3 <80> 3f 00 48 89 f8 74 10 48 83 c7 01 80 3f 00 75 f7 48 29 c7 48 89
RSP: 0018:ffffc9000318b618 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000002c00
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000000 R08: ffff888211918110 R09: ffff888211918000
R10: 000000000000001e R11: ffff888211918000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: ffff8881038ec250
FS:  00007fa53342fe80(0000) GS:ffff88885fcc0000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000002042b2003 CR4: 0000000000770ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Kernel panic - not syncing: Fatal exception
Kernel Offset: disabled
---[ end Kernel panic - not syncing: Fatal exception ]---

Fixes: d22467a71ebe ("RDMA/mlx5: Expand switchdev Q-counters to expose representor statistics")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/016777b7f16eb6bb178999ff59097d0c0f91f68a.1685960567.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>

RDMA/mlx5: Fix Q-counters per vport allocation

Previously Q-counters data was being allocated over the PF for all of
the available vports, however that isn't necessary.

Since each VF or SF has a Q-counter allocated for itself.

So we only need to allocate two counters data structures, one for the
device counters, and one for all the other vports to expose the
representors, since they only need to read from it in order to
determine mainly counters numbers and names, so they can all share.

This in turn also solves a bug we previously had where we couldn't
switch the device to switchdev mode when there were more than 128 SF/VFs
configured, since that is the maximum amount of Q-counters available for
a single port

Fixes: d22467a71ebe ("RDMA/mlx5: Expand switchdev Q-counters to expose representor statistics")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/f54671df16e2227a069b229b33b62cd9ee24c475.1685960567.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>

RDMA/mlx5: Create an indirect flow table for steering anchor

A misbehaved user can create a steering anchor that points to a kernel
flow table and then destroy the anchor without freeing the associated
STC. This creates a problem as the kernel can't destroy the flow
table since there is still a reference to it. As a result, this can
exhaust all available flow table resources, preventing other users from
using the RDMA device.

To prevent this problem, a solution is implemented where a special flow
table with two steering rules is created when a user creates a steering
anchor for the first time. The rules include one that drops all traffic
and another that points to the kernel flow table. If the steering anchor
is destroyed, only the rule pointing to the kernel's flow table is removed.
Any traffic reaching the special flow table after that is dropped.

Since the special flow table is not destroyed when the steering anchor is
destroyed, any issues are prevented from occurring. The remaining resources
are only destroyed when the RDMA device is destroyed, which happens after
all DEVX objects are freed, including the STCs, thus mitigating the issue.

Fixes: 0c6ab0ca9a66 ("RDMA/mlx5: Expose steering anchor to userspace")
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Link: https://lore.kernel.org/r/b4a88a871d651fa4e8f98d552553c1cfe9ba2cd6.1685960567.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>

RDMA/mlx5: Initiate dropless RQ for RAW Ethernet functions

Delay drop data is initiated for PFs that have the capability of
rq_delay_drop and are in roce profile.

However, PFs with RAW ethernet profile do not initiate delay drop data
on function load, causing kernel panic if delay drop struct members are
accessed later on in case a dropless RQ is created.

Thus, stage the delay drop initialization as part of RAW ethernet
PF loading process.

Fixes: b5ca15ad7e61 ("IB/mlx5: Add proper representors support")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Link: https://lore.kernel.org/r/2e9d386785043d48c38711826eb910315c1de141.1685960567.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>

Merge tag 'i2c-for-6.4-rc6' of git://git./linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
"Biggest news is that Andi Shyti steps in for maintaining the
  controller drivers. Thank you very much!

  Other than that, one new driver maintainer and the rest is usual
  driver bugfixes. at24 has a Kconfig dependecy fix"

* tag 'i2c-for-6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  MAINTAINERS: Add entries for Renesas RZ/V2M I2C driver
  eeprom: at24: also select REGMAP
  i2c: sprd: Delete i2c adapter in .remove's error path
  i2c: mv64xxx: Fix reading invalid status value in atomic mode
  i2c: designware: fix idx_write_cnt in read loop
  i2c: mchp-pci1xxxx: Avoid cast to incompatible function type
  i2c: img-scb: Fix spelling mistake "innacurate" -> "inaccurate"
  MAINTAINERS: Add myself as I2C host drivers maintainer

Merge tag 'soundwire-6.4-fixes' of git://git./linux/kernel/git/vkoul/soundwire

Pull soundwire fixes from Vinod Koul:
"Core fix for missing flag clear, error patch handling in qcom driver
  and BIOS quirk for HP Spectre x360:

   - HP Spectre x360 soundwire DMI quirk

   - Error path handling for qcom driver

   - Core fix for missing clear of alloc_slave_rt"

* tag 'soundwire-6.4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
  soundwire: stream: Add missing clear of alloc_slave_rt
  soundwire: qcom: add proper error paths in qcom_swrm_startup()
  soundwire: dmi-quirks: add new mapping for HP Spectre x360

Merge tag 'arm-fixes-6.4-2' of git://git./linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
"Most of the changes this time are for the Qualcomm Snapdragon
  platforms.

  There are bug fixes for error handling in Qualcomm icc-bwmon,
  rpmh-rsc, ramp_controller and rmtfs driver as well as the AMD tee
  firmware driver and a missing initialization in the Arm ff-a firmware
  driver. The Qualcomm RPMh and EDAC drivers need some rework to work
  correctly on all supported chips.

  The DT fixes include:

   - i.MX8 fixes for gpio, pinmux and clock settings

   - ADS touchscreen gpio polarity settings in several machines

   - Address dtb warnings for caches, panel and input-enable properties
     on Qualcomm platforms

   - Incorrect data on qualcomm platforms fir SA8155P power domains,
     SM8550 LLCC, SC7180-lite SDRAM frequencies and SM8550 soundwire

   - Remoteproc firmware paths are corrected for Sony Xperia 10 IV"

* tag 'arm-fixes-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (36 commits)
  firmware: arm_ffa: Set handle field to zero in memory descriptor
  ARM: dts: Fix erroneous ADS touchscreen polarities
  arm64: dts: imx8mn-beacon: Fix SPI CS pinmux
  arm64: dts: imx8-ss-dma: assign default clock rate for lpuarts
  arm64: dts: imx8qm-mek: correct GPIOs for USDHC2 CD and WP signals
  EDAC/qcom: Get rid of hardcoded register offsets
  EDAC/qcom: Remove superfluous return variable assignment in qcom_llcc_core_setup()
  arm64: dts: qcom: sm8550: Use the correct LLCC register scheme
  dt-bindings: cache: qcom,llcc: Fix SM8550 description
  arm64: dts: qcom: sc7180-lite: Fix SDRAM freq for misidentified sc7180-lite boards
  arm64: dts: qcom: sm8550: use uint16 for Soundwire interval
  soc: qcom: rpmhpd: Add SA8155P power domains
  arm64: dts: qcom: Split out SA8155P and use correct RPMh power domains
  dt-bindings: power: qcom,rpmpd: Add SA8155P
  soc: qcom: Rename ice to qcom_ice to avoid module name conflict
  soc: qcom: rmtfs: Fix error code in probe()
  soc: qcom: ramp_controller: Fix an error handling path in qcom_ramp_controller_probe()
  ARM: dts: at91: sama7g5ek: fix debounce delay property for shdwc
  ARM: at91: pm: fix imbalanced reference counter for ethernet devices
  arm64: dts: qcom: sm6375-pdx225: Fix remoteproc firmware paths
  ...

bnx2x: fix page fault following EEH recovery

In the last step of the EEH recovery process, the EEH driver calls into
bnx2x_io_resume() to re-initialize the NIC hardware via the function
bnx2x_nic_load().  If an error occurs during bnx2x_nic_load(), OS and
hardware resources are released and an error code is returned to the
caller.  When called from bnx2x_io_resume(), the return code is ignored
and the network interface is brought up unconditionally.  Later attempts
to send a packet via this interface result in a page fault due to a null
pointer reference.

This patch checks the return code of bnx2x_nic_load(), prints an error
message if necessary, and does not enable the interface.

Signed-off-by: David Christensen <drc@linux.vnet.ibm.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'nf-23-06-08' of git://git./linux/kernel/git/netfilter/nf

netfilter pull request 23-06-08

Pablo Neira Ayuso says:

====================
The following patchset contains Netfilter fixes for net:

1) Add commit and abort set operation to pipapo set abort path.

2) Bail out immediately in case of ENOMEM in nfnetlink batch.

3) Incorrect error path handling when creating a new rule leads to
dangling pointer in set transaction list.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

netlabel: fix shift wrapping bug in netlbl_catmap_setlong()

There is a shift wrapping bug in this code on 32-bit architectures.
NETLBL_CATMAP_MAPTYPE is u64, bitmap is unsigned long.
Every second 32-bit word of catmap becomes corrupted.

Signed-off-by: Dmitry Mastykin <dmastykin@astralinux.ru>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'octeontx2-af-fixes'

Naveen Mamindlapalli says:

====================
RVU NIX AF driver fixes

This patch series contains few fixes to the RVU NIX AF driver.

The first patch modifies the driver check to validate whether the req count
for contiguous and non-contiguous arrays is less than the maximum limit.

The second patch fixes HW lbk interface link credit programming.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

octeontx2-af: fix lbk link credits on cn10k

Fix LBK link credits on CN10K to be same as CN9K i.e
16 * MAX_LBK_DATA_RATE instead of current scheme of
calculation based on LBK buf length / FIFO size.

Fixes: 6e54e1c5399a ("octeontx2-af: cn10K: Add MTU configuration")
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

octeontx2-af: fixed resource availability check

txschq_alloc response have two different arrays to store continuous
and non-continuous schedulers of each level. Requested count should
be checked for each array separately.

Fixes: 5d9b976d4480 ("octeontx2-af: Support fixed transmit scheduler topology")
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch '100GbE' of git://git./linux/kernel/git/tnguy/net-queue

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2023-06-08 (ice)

This series contains updates to ice driver only.

Simon Horman stops null pointer dereference for GNSS error path.

Kamil fixes memory leak when downing interface when XDP is enabled.

* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: Fix XDP memory leak when NIC is brought up and down
ice: Don't dereference NULL in ice_gnss_read error path
====================

Link: https://lore.kernel.org/r/20230608200051.451752-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

iavf: remove mask from iavf_irq_enable_queues()

Enable more than 32 IRQs by removing the u32 bit mask in
iavf_irq_enable_queues(). There is no need for the mask as there are no
callers that select individual IRQs through the bitmask. Also, if the PF
allocates more than 32 IRQs, this mask will prevent us from using all of
them.

Modify the comment in iavf_register.h to show that the maximum number
allowed for the IRQ index is 63 as per the iAVF standard 1.0 [1].

link: [1] https://www.intel.com/content/dam/www/public/us/en/documents/product-specifications/ethernet-adaptive-virtual-function-hardware-spec.pdf
Fixes: 5eae00c57f5e ("i40evf: main driver core")
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230608200226.451861-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'selftests-mptcp-skip-tests-not-supported-by-old-kernels-part-2'

Matthieu Baerts says:

====================
selftests: mptcp: skip tests not supported by old kernels (part 2)

After a few years of increasing test coverage in the MPTCP selftests, we
realised [1] the last version of the selftests is supposed to run on old
kernels without issues.

Supporting older versions is not that easy for this MPTCP case: these
selftests are often validating the internals by checking packets that
are exchanged, when some MIB counters are incremented after some
actions, how connections are getting opened and closed in some cases,
etc. In other words, it is not limited to the socket interface between
the userspace and the kernelspace.

In addition to that, the current MPTCP selftests run a lot of different
sub-tests but the TAP13 protocol used in the selftests don't support
sub-tests: one failure in sub-tests implies that the whole selftest is
seen as failed at the end because sub-tests are not tracked. It is then
important to skip sub-tests not supported by old kernels.

To minimise the modifications and reduce the complexity to support old
versions, the idea is to look at external signs and skip the whole
selftests or just some sub-tests before starting them. This cannot be
applied in all cases.

This second part focuses on marking different sub-tests as skipped if
some MPTCP features are not supported. A few techniques are used here:

- Before starting some tests:

  - Check if a file (sysctl knob) is present: that's what patch 13/14 is
    doing for the userspace PM feature.

  - Check if a symbol is present in /proc/kallsyms: patch 1/14 adds some
    helpers in mptcp_lib.sh to ease its use. Then these helpers are used
    in patches 2, 3, 4, 10, 11 and 14/14.

  - Set a flag and get the status to check if a feature is supported:
    patch 8/14 is doing that with the 'fullmesh' flag.

- After having launched the tests:

  - Retrieve the counters after a test and check if they are different
    than 0. Similar to the check with the flag, that's not ideal but in
    this case, the counters were already present before the introduction
    of MPTCP but they have been supported by MPTCP sockets only later.
    Patches 5 and 6/14 are using this technique.

Before skipping tests, SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var
value is checked: if it is set to 1, the test is marked as "failed"
instead of "skipped". MPTCP public CI expects to have all features
supported and it sets this env var to 1 to catch regressions in these
new checks.

Patches 7/14 and 9/14 are a bit different because they don't skip tests:

- Patch 7/14 retrieves the default values instead of using hardcoded
  ones because these default values have been modified at some points.
  Then the comparisons are done with the default values.

- patch 9/14 relaxes the expected returned size from MPTCP's getsockopt
  because the different structures gathering various info can get new
  fields and get bigger over time. We cannot expect that the userspace
  is using the same structure as the kernel.

Patch 12/14 marks the test as "skipped" instead of "failed" if the "ip"
tool is not available.

In this second part, the "mptcp_join" selftest is not modified yet. This
will come soon after in the third part with quite a few patches.

Link: https://lore.kernel.org/stable/CA+G9fYtDGpgT4dckXD-y-N92nqUxuvue_7AtDdBcHrbOMsDZLg@mail.gmail.com/
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
====================

Link: https://lore.kernel.org/r/20230608-upstream-net-20230608-mptcp-selftests-support-old-kernels-part-2-v1-0-20997a6fd841@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: userspace pm: skip PM listener events tests if unavailable

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

One of them is the new listener events linked to the path-manager
introduced by commit f8c9dfbd875b ("mptcp: add pm listener events").

It is possible to look for "mptcp_event_pm_listener" in kallsyms to know
in advance if the kernel supports this feature and skip these sub-tests
if the feature is not supported.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 6c73008aa301 ("selftests: mptcp: listener test for userspace PM")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: userspace pm: skip if not supported

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

One of them is the MPTCP Userspace PM introduced by commit 4638de5aefe5
("mptcp: handle local addrs announced by userspace PMs").

We can skip all these tests if the feature is not supported simply by
looking for the MPTCP pm_type's sysctl knob.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 259a834fadda ("selftests: mptcp: functional tests for the userspace PM type")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: userspace pm: skip if 'ip' tool is unavailable

When a required tool is missing, the return code 4 (SKIP) should be
returned instead of 1 (FAIL).

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 259a834fadda ("selftests: mptcp: functional tests for the userspace PM type")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: sockopt: skip TCP_INQ checks if not supported

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

One of them is TCP_INQ cmsg support introduced in commit 2c9e77659a0c
("mptcp: add TCP_INQ cmsg support").

It is possible to look for "mptcp_ioctl" in kallsyms because it was
needed to introduce the mentioned feature. We can skip these tests and
not set TCPINQ option if the feature is not supported.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 5cbd886ce2a9 ("selftests: mptcp: add TCP_INQ support")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: sockopt: skip getsockopt checks if not supported

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

One of them is the getsockopt(SOL_MPTCP) to get info about the MPTCP
connections introduced by commit 55c42fa7fa33 ("mptcp: add MPTCP_INFO
getsockopt") and the following ones.

It is possible to look for "mptcp_diag_fill_info" in kallsyms because
it is introduced by the mentioned feature. So we can know in advance if
the feature is supported and skip the sub-test if not.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: ce9979129a0b ("selftests: mptcp: add mptcp getsockopt test cases")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: sockopt: relax expected returned size

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

One of them is the getsockopt(SOL_MPTCP) to get info about the MPTCP
connections introduced by commit 55c42fa7fa33 ("mptcp: add MPTCP_INFO
getsockopt") and the following ones.

We cannot guess in advance which sizes the kernel will returned: older
kernel can returned smaller sizes, e.g. recently the tcp_info structure
has been modified in commit 71fc704768f6 ("tcp: add rcv_wnd and
plb_rehash to TCP_INFO") where a new field has been added.

The userspace can also expect a smaller size if it is compiled with old
uAPI kernel headers.

So for these sizes, we can only check if they are above a certain
threshold, 0 for the moment. We can also only compared sizes with the
ones set by the kernel.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: ce9979129a0b ("selftests: mptcp: add mptcp getsockopt test cases")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: pm nl: skip fullmesh flag checks if not supported

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

One of them is the fullmesh flag that can be given to the MPTCP
in-kernel path-manager and introduced in commit 2843ff6f36db ("mptcp:
remote addresses fullmesh").

If the flag is not visible in the dump after having set it, we don't
check the content. Note that if we expect to have this feature and
SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var is set to 1, we always
check the content to avoid regressions.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 6da1dfdd037e ("selftests: mptcp: add set_flags tests in pm_netlink.sh")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: pm nl: remove hardcoded default limits

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

One of them is the checks of the default limits returned by the MPTCP
in-kernel path-manager. The default values have been modified by commit
72bcbc46a5c3 ("mptcp: increase default max additional subflows to 2").
Instead of comparing with hardcoded values, we can get the default one
and compare with them.

Note that if we expect to have the latest version, we continue to check
the hardcoded values to avoid unexpected behaviour changes.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: eedbc685321b ("selftests: add PM netlink functional tests")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: diag: skip inuse tests if not supported

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

One of them is the reporting of the MPTCP sockets being used, introduced
by commit c558246ee73e ("mptcp: add statistics for mptcp socket in use").

Similar to the parent commit, it looks like there is no good pre-check
to do here, i.e. dedicated function available in kallsyms. Instead, we
try to get info and if nothing is returned, the test is marked as
skipped.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: e04a30f78809 ("selftest: mptcp: add test for mptcp socket in use")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: diag: skip listen tests if not supported

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

One of them is the listen diag dump support introduced by
commit 4fa39b701ce9 ("mptcp: listen diag dump support").

It looks like there is no good pre-check to do here, i.e. dedicated
function available in kallsyms. Instead, we try to get info if nothing
is returned, the test is marked as skipped.

That's not ideal because something could be wrong with the feature and
instead of reporting an error, the test could be marked as skipped. If
we know in advanced that the feature is supposed to be supported, the
tester can set SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var to 1: in
this case the test will report an error instead of marking the test as
skipped if nothing is returned.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: f2ae0fa68e28 ("selftests/mptcp: add diag listen tests")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: connect: skip TFO tests if not supported

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

One of them is the support of TCP_FASTOPEN socket option with MPTCP
connections introduced by commit 4ffb0a02346c ("mptcp: add TCP_FASTOPEN
sock option").

It is possible to look for "mptcp_fastopen_" in kallsyms to know if the
feature is supported or not.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: ca7ae8916043 ("selftests: mptcp: mptfo Initiator/Listener")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: connect: skip disconnect tests if not supported

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

One of them is the full support of disconnections from the userspace
introduced by commit b29fcfb54cd7 ("mptcp: full disconnect
implementation").

It is possible to look for "mptcp_pm_data_reset" in kallsyms because a
preparation patch added it to ease the introduction of the mentioned
feature.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 05be5e273c84 ("selftests: mptcp: add disconnect tests")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: connect: skip transp tests if not supported

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

One of them is the support of IP(V6)_TRANSPARENT socket option with
MPTCP connections introduced by commit c9406a23c116 ("mptcp: sockopt:
add SOL_IP freebind & transparent options").

It is possible to look for "__ip_sock_set_tos" in kallsyms because
IP(V6)_TRANSPARENT socket option support has been added after TOS
support which came with the required infrastructure in MPTCP sockopt
code. To support TOS, the following function has been exported (T). Not
great but better than checking for a specific kernel version.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 5fb62e9cd3ad ("selftests: mptcp: add tproxy test case")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: lib: skip if missing symbol

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

New functions are now available to easily detect if a certain feature is
missing by looking at kallsyms.

These new helpers are going to be used in the following commits. In
order to ease the backport of such future patches, it would be good if
this patch is backported up to the introduction of MPTCP selftests,
hence the Fixes tag below: this type of check was supposed to be done
from the beginning.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 048d19d444be ("mptcp: add basic kselftest for mptcp")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

dt-bindings: i3c: silvaco,i3c-master: fix missing schema restriction

Each device schema must end with unevaluatedProperties: false, if it
references other common schema. Otherwise it would allow any properties
to be listed.

Fixes: b8b0446f1f1a ("dt-bindings: i3c: Describe Silvaco master binding")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230609141107.66128-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>

of: overlay: Fix missing of_node_put() in error case of init_overlay_changeset()

In init_overlay_changeset(), the variable "node" is from
of_get_child_by_name(), and the "node" should be discarded in error case.

Fixes: d1651b03c2df ("of: overlay: add overlay symbols to live device tree")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20230602020502.11693-1-hayashi.kunihiko@socionext.com
Signed-off-by: Rob Herring <robh@kernel.org>

Merge tag 'block-6.4-2023-06-09' of git://git.kernel.dk/linux

Pull block fixes from Jens Axboe:

- Fix an issue with the hardware queue nr_active, causing it to become
   imbalanced (Tian)

- Fix an issue with null_blk not releasing pages if configured as
   memory backed (Nitesh)

- Fix a locking issue in dasd (Jan)

* tag 'block-6.4-2023-06-09' of git://git.kernel.dk/linux:
  s390/dasd: Use correct lock while counting channel queue length
  null_blk: Fix: memory release when memory_backed=1
  blk-mq: fix blk_mq_hw_ctx active request accounting

Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost

Pull virtio bug fixes from Michael Tsirkin:
"A bunch of fixes all over the place"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  tools/virtio: use canonical ftrace path
  vhost_vdpa: support PACKED when setting-getting vring_base
  vhost: support PACKED when setting-getting vring_base
  vhost: Fix worker hangs due to missed wake up calls
  vhost: Fix crash during early vhost_transport_send_pkt calls
  vhost_net: revert upend_idx only on retriable error
  vhost_vdpa: tell vqs about the negotiated
  vdpa/mlx5: Fix hang when cvq commands are triggered during device unregister
  tools/virtio: Add .gitignore for ringtest
  tools/virtio: Fix arm64 ringtest compilation error
  vduse: avoid empty string for dev name
  vhost: use kzalloc() instead of kmalloc() followed by memset()

Merge tag 'ceph-for-6.4-rc6' of https://github.com/ceph/ceph-client

Pull ceph fixes from Ilya Dryomov:
"A fix for a potential data corruption in differential backup and
  snapshot-based mirroring scenarios in RBD and a reference counting
  fixup to avoid use-after-free in CephFS, all marked for stable"

* tag 'ceph-for-6.4-rc6' of https://github.com/ceph/ceph-client:
  ceph: fix use-after-free bug for inodes when flushing capsnaps
  rbd: get snapshot context after exclusive lock is ensured to be held
  rbd: move RBD_OBJ_FLAG_COPYUP_ENABLED flag setting

s390/dasd: Use correct lock while counting channel queue length

The lock around counting the channel queue length in the BIODASDINFO
ioctl was incorrectly changed to the dasd_block->queue_lock with commit
583d6535cb9d ("dasd: remove dead code"). This can lead to endless list
iterations and a subsequent crash.

The queue_lock is supposed to be used only for queue lists belonging to
dasd_block. For dasd_device related queue lists the ccwdev lock must be
used.

Fix the mentioned issues by correctly using the ccwdev lock instead of
the queue lock.

Fixes: 583d6535cb9d ("dasd: remove dead code")
Cc: stable@vger.kernel.org # v5.0+
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20230609153750.1258763-2-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge tag 'riscv-for-linus-6.4-rc6' of git://git./linux/kernel/git/riscv/linux

Pull RISC-V fixes from Palmer Dabbelt:

- A fix to avoid ISA-disallowed privilege mappings that can result from
   WRITE+EXEC mmap requests from userspace.

- A fix for kfence to handle the huge pages.

- A fix to avoid converting misaligned VAs to huge pages.

- ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE has been selected so kprobe
   can understand user pointers.

* tag 'riscv-for-linus-6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: fix kprobe __user string arg print fault issue
  riscv: Check the virtual alignment before choosing a map size
  riscv: Fix kfence now that the linear mapping can be backed by PUD/P4D/PGD
  riscv: mm: Ensure prot of VM_WRITE and VM_EXEC must be readable

Merge tag 's390-6.4-3' of git://git./linux/kernel/git/s390/linux

Pull s390 fixes from Alexander Gordeev:

- Avoid linker error for randomly generated config file that has
   CONFIG_BRANCH_PROFILE_NONE enabled and make it similar to riscv, x86
   and also to commit 4bf3ec384edf ("s390: disable branch profiling for
   vdso").

- Currently, if the device is offline and all the channel paths are
   either configured or varied offline, the associated subchannel gets
   unregistered. Don't unregister the subchannel, instead unregister
   offline device.

* tag 's390-6.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/purgatory: disable branch profiling
  s390/cio: unregister device when the only path is gone

RDMA/rxe: Fix the use-before-initialization error of resp_pkts

In the following:

  Call Trace:
   <TASK>
   __dump_stack lib/dump_stack.c:88 [inline]
   dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106
   assign_lock_key kernel/locking/lockdep.c:982 [inline]
   register_lock_class+0xdb6/0x1120 kernel/locking/lockdep.c:1295
   __lock_acquire+0x10a/0x5df0 kernel/locking/lockdep.c:4951
   lock_acquire kernel/locking/lockdep.c:5691 [inline]
   lock_acquire+0x1b1/0x520 kernel/locking/lockdep.c:5656
   __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
   _raw_spin_lock_irqsave+0x3d/0x60 kernel/locking/spinlock.c:162
   skb_dequeue+0x20/0x180 net/core/skbuff.c:3639
   drain_resp_pkts drivers/infiniband/sw/rxe/rxe_comp.c:555 [inline]
   rxe_completer+0x250d/0x3cc0 drivers/infiniband/sw/rxe/rxe_comp.c:652
   rxe_qp_do_cleanup+0x1be/0x820 drivers/infiniband/sw/rxe/rxe_qp.c:761
   execute_in_process_context+0x3b/0x150 kernel/workqueue.c:3473
   __rxe_cleanup+0x21e/0x370 drivers/infiniband/sw/rxe/rxe_pool.c:233
   rxe_create_qp+0x3f6/0x5f0 drivers/infiniband/sw/rxe/rxe_verbs.c:583

This is a use-before-initialization problem.

It happens because rxe_qp_do_cleanup is called during error unwind before
the struct has been fully initialized.

Move the initialization of the skb earlier.

Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20230602035408.741534-1-yanjun.zhu@intel.com
Reported-by: syzbot+eba589d8f49c73d356da@syzkaller.appspotmail.com
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

Merge tag 'gpio-fixes-for-v6.4-rc6' of git://git./linux/kernel/git/brgl/linux

Pull gpio fixes from Bartosz Golaszewski:
"Two fixes for the GPIO testing module and one commit making Andy a
  reviewer for the GPIO subsystem:

   - fix a memory corruption bug in gpio-sim

   - fix inconsistencies in user-space configuration of gpio-sim

   - make Andy Shevchenko a reviewer for the GPIO subsystem"

* tag 'gpio-fixes-for-v6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  MAINTAINERS: add Andy Shevchenko as reviewer for the GPIO subsystem
  gpio: sim: quietly ignore configured lines outside the bank
  gpio: sim: fix memory corruption when adding named lines and unnamed hogs

tools/virtio: use canonical ftrace path

The canonical location for the tracefs filesystem is at /sys/kernel/tracing.

But, from Documentation/trace/ftrace.rst:

  Before 4.1, all ftrace tracing control files were within the debugfs
  file system, which is typically located at /sys/kernel/debug/tracing.
  For backward compatibility, when mounting the debugfs file system,
  the tracefs file system will be automatically mounted at:

  /sys/kernel/debug/tracing

A few spots in tools/virtio still refer to this older debugfs
path, so let's update them to avoid confusion.

Signed-off-by: Ross Zwisler <zwisler@google.com>
Message-Id: <20230215223350.2658616-6-zwisler@google.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>

vhost_vdpa: support PACKED when setting-getting vring_base

Use the right structs for PACKED or split vqs when setting and
getting the vring base.

Fixes: 4c8cf31885f6 ("vhost: introduce vDPA-based backend")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Message-Id: <20230424225031.18947-4-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>

vhost: support PACKED when setting-getting vring_base

Use the right structs for PACKED or split vqs when setting and
getting the vring base.

Fixes: 4c8cf31885f6 ("vhost: introduce vDPA-based backend")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Message-Id: <20230424225031.18947-3-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>

Merge tag 'pinctrl-v6.4-2' of git://git./linux/kernel/git/linusw/linux-pinctrl

Pull pin control fix from Linus Walleij:
"A single fix for the Meson driver, nothing else has surfaced so far
this cycle"

* tag 'pinctrl-v6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: meson-axg: add missing GPIOA_18 gpio group

Merge tag 'sound-6.4-rc6' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
"Lots of small fixes, and almost all are device-specific.

  A few of them are the fixes for the old regressions by the fast kctl
  lookups (introduced around 5.19). Others are ASoC simple-card fixes,
  selftest compile warning fixes, ASoC AMD quirks, various ASoC codec
  fixes as well as usual HD-audio quirks"

* tag 'sound-6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (26 commits)
  ALSA: hda/realtek: Enable 4 amplifiers instead of 2 on a HP platform
  ALSA: hda: Fix kctl->id initialization
  ALSA: gus: Fix kctl->id initialization
  ALSA: cmipci: Fix kctl->id initialization
  ALSA: ymfpci: Fix kctl->id initialization
  ALSA: ice1712,ice1724: fix the kcontrol->id initialization
  ALSA: hda/realtek: Add quirk for Clevo NS50AU
  ALSA: hda/realtek: Add quirks for Asus ROG 2024 laptops using CS35L41
  ALSA: hda/realtek: Add "Intel Reference board" and "NUC 13" SSID in the ALC256
  ALSA: hda/realtek: Add Lenovo P3 Tower platform
  ALSA: hda/realtek: Add a quirk for HP Slim Desktop S01
  selftests: alsa: pcm-test: Fix compiler warnings about the format
  ASoC: fsl_sai: Enable BCI bit if SAI works on synchronous mode with BYP asserted
  ASoC: simple-card-utils: fix PCM constraint error check
  ASoC: cs35l56: Remove NULL check from cs35l56_sdw_dai_set_stream()
  ASoC: max98363: limit the number of channel to 1
  ASoC: max98363: Removed 32bit support
  ASoC: mediatek: mt8195: fix use-after-free in driver remove path
  ASoC: mediatek: mt8188: fix use-after-free in driver remove path
  ASoC: amd: yc: Add Thinkpad Neo14 to quirks list for acp6x
  ...