crypto: cavium - prevent integer overflow loading firmware

The "code_length" value comes from the firmware file.  If your firmware
is untrusted realistically there is probably very little you can do to
protect yourself.  Still we try to limit the damage as much as possible.
Also Smatch marks any data read from the filesystem as untrusted and
prints warnings if it not capped correctly.

The "ntohl(ucode->code_length) * 2" multiplication can have an
integer overflow.

Fixes: 9e2c7d99941d ("crypto: cavium - Add Support for Octeon-tx CPT Engine")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: marvell/octeontx - prevent integer overflows

The "code_length" value comes from the firmware file.  If your firmware
is untrusted realistically there is probably very little you can do to
protect yourself.  Still we try to limit the damage as much as possible.
Also Smatch marks any data read from the filesystem as untrusted and
prints warnings if it not capped correctly.

The "code_length * 2" can overflow.  The round_up(ucode_size, 16) +
sizeof() expression can overflow too.  Prevent these overflows.

Fixes: d9110b0b01ff ("crypto: marvell - add support for OCTEON TX CPT engine")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: aspeed - fix build error when only CRYPTO_DEV_ASPEED is enabled

Fix build error within the following configs setting:
- CONFIG_CRYPTO_DEV_ASPEED=y
- CONFIG_CRYPTO_DEV_ASPEED_HACE_HASH is not set
- CONFIG_CRYPTO_DEV_ASPEED_HACE_CRYPTO is not set

Error messages:
make[4]: *** No rule to make target 'drivers/crypto/aspeed/aspeed_crypto.o'
, needed by 'drivers/crypto/aspeed/built-in.a'.
make[4]: Target '__build' not remade because of errors.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Neal Liu <neal_liu@aspeedtech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: hisilicon/qm - fix the qos value initialization

The default qos value is not initialized when sriov is repeatedly enabled
and disabled. So add the vf qos value initialized in the sriov enable
process.

Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: sun4i-ss - use DEFINE_SHOW_ATTRIBUTE to simplify sun4i_ss_debugfs

Use DEFINE_SHOW_ATTRIBUTE helper macro to simplify the code.

Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: tcrypt - add async speed test for aria cipher

In order to test for the performance of aria-avx implementation, it needs
an async speed test.
So, it adds async speed tests to the tcrypt.

Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: aria-avx - add AES-NI/AVX/x86_64/GFNI assembler implementation of aria cipher

The implementation is based on the 32-bit implementation of the aria.
Also, aria-avx process steps are the similar to the camellia-avx.
1. Byteslice(16way)
2. Add-round-key.
3. Sbox
4. Diffusion layer.

Except for s-box, all steps are the same as the aria-generic
implementation. s-box step is very similar to camellia and
sm4 implementation.

There are 2 implementations for s-box step.
One is to use AES-NI and affine transformation, which is the same as
Camellia, sm4, and others.
Another is to use GFNI.
GFNI implementation is faster than AES-NI implementation.
So, it uses GFNI implementation if the running CPU supports GFNI.

There are 4 s-boxes in the ARIA and the 2 s-boxes are the same as
AES's s-boxes.

To calculate the first sbox, it just uses the aesenclast and then
inverts shift_row.
No more process is needed for this job because the first s-box is
the same as the AES encryption s-box.

To calculate the second sbox(invert of s1), it just uses the aesdeclast
and then inverts shift_row.
No more process is needed for this job because the second s-box is
the same as the AES decryption s-box.

To calculate the third s-box, it uses the aesenclast,
then affine transformation, which is combined AES inverse affine and
ARIA S2.

To calculate the last s-box, it uses the aesdeclast,
then affine transformation, which is combined X2 and AES forward affine.

The optimized third and last s-box logic and GFNI s-box logic are
implemented by Jussi Kivilinna.

The aria-generic implementation is based on a 32-bit implementation,
not an 8-bit implementation. the aria-avx Diffusion Layer implementation
is based on aria-generic implementation because 8-bit implementation is
not fit for parallel implementation but 32-bit is enough to fit for this.

Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: aria - prepare generic module for optimized implementations

It renames aria to aria_generic and exports some functions such as
aria_set_key(), aria_encrypt(), and aria_decrypt() to be able to be
used by aria-avx implementation.

Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: artpec6 - Fix printk warning on size_t/%d

Switch to %zu instead of %d for printing size_t.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: add __init/__exit annotations to init/exit funcs

Add missing __init/__exit annotations to init/exit funcs.

Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: blake2s - revert unintended config addition of CRYPTO_BLAKE2S

Commit 2d16803c562e ("crypto: blake2s - remove shash module") removes the
config CRYPTO_BLAKE2S.

Commit 3f342a23257d ("crypto: Kconfig - simplify hash entries") makes
various changes to the config descriptions as part of some consolidation
and clean-up, but among all those changes, it also accidently adds back
CRYPTO_BLAKE2S after its removal due to the original patch being based on
a state before the CRYPTO_BLAKE2S removal.

See Link for the author's confirmation of this happening accidently.

Fixes: 3f342a23257d ("crypto: Kconfig - simplify hash entries")
Link: https://lore.kernel.org/all/MW5PR84MB18424AB8C095BFC041AE33FDAB479@MW5PR84MB1842.NAMPRD84.PROD.OUTLOOK.COM/
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: arm64 - revert unintended config name change for CRYPTO_SHA1_ARM64_CE

Commit 3f342a23257d ("crypto: Kconfig - simplify hash entries") makes
various changes to the config descriptions as part of some consolidation
and clean-up, but among all those changes, it also accidently renames
CRYPTO_SHA1_ARM64_CE to CRYPTO_SHA1_ARM64.

Revert this unintended config name change.

See Link for the author's confirmation of this happening accidently.

Fixes: 3f342a23257d ("crypto: Kconfig - simplify hash entries")
Link: https://lore.kernel.org/all/MW5PR84MB18424AB8C095BFC041AE33FDAB479@MW5PR84MB1842.NAMPRD84.PROD.OUTLOOK.COM/
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: inside-secure - Replace generic aes with libaes

Commit 363a90c2d517 ("crypto: safexcel/aes - switch to
library version of key expansion routine") removed
CRYPTO_AES in the config. However, some portions of codes
still rely on generic AES cipher (e.g. refer to
safexcel_aead_gcm_cra_init(), safexcel_xcbcmac_cra_init()).
This causes transform allocation failure for those algos,
if CRYPTO_AES is not manually enabled.

To resolve that, we replace all existing AES cipher
dependent codes with their AES library counterpart.

Fixes: 363a90c2d517 ("crypto: safexcel/aes - switch to library version of key expansion routine")
Signed-off-by: Peter Harliman Liem <pliem@maxlinear.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: inside_secure - Avoid dma map if size is zero

From commit d03c54419274 ("dma-mapping: disallow .map_sg
operations from returning zero on error"), dma_map_sg()
produces warning if size is 0. This results in visible
warnings if crypto length is zero.
To avoid that, we avoid calling dma_map_sg if size is zero.

Signed-off-by: Peter Harliman Liem <pliem@maxlinear.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: qat - use reference to structure in dma_map_single()

When mapping the input and output parameters, the implementations of RSA
and DH pass to the function dma_map_single() a pointer to the first
member of the structure they want to map instead of a pointer to the
actual structure.
This results in set of warnings reported by the static analyser Smatch:

    drivers/crypto/qat/qat_common/qat_asym_algs.c:335 qat_dh_compute_value() error: dma_map_single_attrs() '&qat_req->in.dh.in.b' too small (8 vs 64)
    drivers/crypto/qat/qat_common/qat_asym_algs.c:341 qat_dh_compute_value() error: dma_map_single_attrs() '&qat_req->out.dh.r' too small (8 vs 64)
    drivers/crypto/qat/qat_common/qat_asym_algs.c:732 qat_rsa_enc() error: dma_map_single_attrs() '&qat_req->in.rsa.enc.m' too small (8 vs 64)
    drivers/crypto/qat/qat_common/qat_asym_algs.c:738 qat_rsa_enc() error: dma_map_single_attrs() '&qat_req->out.rsa.enc.c' too small (8 vs 64)
    drivers/crypto/qat/qat_common/qat_asym_algs.c:878 qat_rsa_dec() error: dma_map_single_attrs() '&qat_req->in.rsa.dec.c' too small (8 vs 64)
    drivers/crypto/qat/qat_common/qat_asym_algs.c:884 qat_rsa_dec() error: dma_map_single_attrs() '&qat_req->out.rsa.dec.m' too small (8 vs 64)

Where the address of the first element of a structure is used as an
input for the function dma_map_single(), replace it with the address of
the structure. This fix does not introduce any functional change as the
addresses are the same.

Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Revert "crypto: qat - reduce size of mapped region"

This reverts commit e48767c17718067ba21fb2ef461779ec2506f845.

In an attempt to resolve a set of warnings reported by the static
analyzer Smatch, the reverted commit improperly reduced the sizes of the
DMA mappings used for the input and output parameters for both RSA and
DH creating a mismatch (map size=8 bytes, unmap size=64 bytes).

This issue is reported when CONFIG_DMA_API_DEBUG is selected, when the
crypto self test is run. The function dma_unmap_single() reports a
warning similar to the one below, saying that the `device driver frees
DMA memory with different size`.

    DMA-API: 4xxx 0000:06:00.0: device driver frees DMA memory with different size [device address=0x0000000123206c80] [map size=8 bytes] [unmap size=64 bytes]
    WARNING: CPU: 0 PID: 0 at kernel/dma/debug.c:973 check_unmap+0x3d0/0x8c0\
    ...
    Call Trace:
    <IRQ>
    debug_dma_unmap_page+0x5c/0x60
    qat_dh_cb+0xd7/0x110 [intel_qat]
    qat_alg_asym_callback+0x1a/0x30 [intel_qat]
    adf_response_handler+0xbd/0x1a0 [intel_qat]
    tasklet_action_common.constprop.0+0xcd/0xe0
    __do_softirq+0xf8/0x30c
    __irq_exit_rcu+0xbf/0x140
    common_interrupt+0xb9/0xd0
    </IRQ>
    <TASK>

The original commit was correct.

Cc: <stable@vger.kernel.org>
Reported-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: qat - fix DMA transfer direction

When CONFIG_DMA_API_DEBUG is selected, while running the crypto self
test on the QAT crypto algorithms, the function add_dma_entry() reports
a warning similar to the one below, saying that overlapping mappings
are not supported. This occurs in tests where the input and the output
scatter list point to the same buffers (i.e. two different scatter lists
which point to the same chunks of memory).

The logic that implements the mapping uses the flag DMA_BIDIRECTIONAL
for both the input and the output scatter lists which leads to
overlapped write mappings. These are not supported by the DMA layer.

Fix by specifying the correct DMA transfer directions when mapping
buffers. For in-place operations where the input scatter list
matches the output scatter list, buffers are mapped once with
DMA_BIDIRECTIONAL, otherwise input buffers are mapped using the flag
DMA_TO_DEVICE and output buffers are mapped with DMA_FROM_DEVICE.
Overlapping a read mapping with a write mapping is a valid case in
dma-coherent devices like QAT.
The function that frees and unmaps the buffers, qat_alg_free_bufl()
has been changed accordingly to the changes to the mapping function.

   DMA-API: 4xxx 0000:06:00.0: cacheline tracking EEXIST, overlapping mappings aren't supported
   WARNING: CPU: 53 PID: 4362 at kernel/dma/debug.c:570 add_dma_entry+0x1e9/0x270
   ...
   Call Trace:
   dma_map_page_attrs+0x82/0x2d0
   ? preempt_count_add+0x6a/0xa0
   qat_alg_sgl_to_bufl+0x45b/0x990 [intel_qat]
   qat_alg_aead_dec+0x71/0x250 [intel_qat]
   crypto_aead_decrypt+0x3d/0x70
   test_aead_vec_cfg+0x649/0x810
   ? number+0x310/0x3a0
   ? vsnprintf+0x2a3/0x550
   ? scnprintf+0x42/0x70
   ? valid_sg_divisions.constprop.0+0x86/0xa0
   ? test_aead_vec+0xdf/0x120
   test_aead_vec+0xdf/0x120
   alg_test_aead+0x185/0x400
   alg_test+0x3d8/0x500
   ? crypto_acomp_scomp_free_ctx+0x30/0x30
   ? __schedule+0x32a/0x12a0
   ? ttwu_queue_wakelist+0xbf/0x110
   ? _raw_spin_unlock_irqrestore+0x23/0x40
   ? try_to_wake_up+0x83/0x570
   ? _raw_spin_unlock_irqrestore+0x23/0x40
   ? __set_cpus_allowed_ptr_locked+0xea/0x1b0
   ? crypto_acomp_scomp_free_ctx+0x30/0x30
   cryptomgr_test+0x27/0x50
   kthread+0xe6/0x110
   ? kthread_complete_and_exit+0x20/0x20
   ret_from_fork+0x1f/0x30

Fixes: d370cec ("crypto: qat - Intel(R) QAT crypto interface")
Link: https://lore.kernel.org/linux-crypto/20220223080400.139367-1-gilad@benyossef.com/
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: hisilicon - support get algs by the capability register

The value of qm algorithm can change dynamically according to the
value of the capability register.

Add xxx_set_qm_algs() function to obtain the algs that the
hardware device supported from the capability register and set
them into usr mode attribute files.

Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com>
Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com>
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: hisilicon/sec - get algorithm bitmap from registers

Add function 'sec_get_alg_bitmap' to get hardware algorithm bitmap
before register algorithm to crypto, instead of determining
whether to register an algorithm based on hardware platform's version.

Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com>
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: hisilicon/zip - support zip capability

Add function 'hisi_zip_alg_support' to get device configuration
information from capability registers, instead of determining whether
to register an algorithm based on hardware platform's version.

Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: hisilicon/hpre - optimize registration of ecdh

Use table to store the different ecdh curve configuration,
making the registration of ecdh clearer and expansion more
convenient.

Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com>
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: hisilicon/hpre - support hpre capability

Read some hpre device configuration info from capability
register, instead of fixed macros.

Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com>
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: hisilicon/qm - support get device irq information from hardware registers

Support get device irq information from hardware registers
instead of fixed macros.

Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: hisilicon/qm - get error type from hardware registers

Hardware V3 and later versions support get error type from
registers. To be compatible with later hardware versions,
get error type from registers instead of fixed marco.

Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: hisilicon/qm - add UACCE_CMD_QM_SET_QP_INFO support

To be compatible with accelerator devices of different
versions, 'UACCE_CMD_QM_SET_QP_INFO' ioctl is added to obtain
queue information in userspace, including queue depth and buffer
description size.

Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: hisilicon/qm - get qp num and depth from hardware registers

Hardware V3 and later versions can obtain qp num and depth supported
by the hardware from registers. To be compatible with later hardware
versions, get qp num and depth from registers instead of fixed marcos.

Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: hisilicon/qm - get hardware features from hardware registers

Before hardware V3, hardwares do not provide the feature registers,
driver resolves hardware differences based on the hardware version.
As a result, the driver does not support the new hardware.

Hardware V3 and later versions support to obtain hardware features,
such as power-gating management and doorbell isolation, through
the hardware registers. To be compatible with later hardware versions,
the features of the current device is obtained by reading the
hardware registers instead of the hardware version.

Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: hisilicon/sec - delete redundant blank lines

Some coding style fixes in sec crypto file.

Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: inside-secure - Change swab to swab32

The use of swab() is causing failures in 64-bit arch, as it
translates to __swab64() instead of the intended __swab32().
It eventually causes wrong results in xcbcmac & cmac algo.

Fixes: 78cf1c8bfcb8 ("crypto: inside-secure - Move ipad/opad into safexcel_context")
Signed-off-by: Peter Harliman Liem <pliem@maxlinear.com>
Acked-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: nx - Remove the unneeded result variable

Return the value set_msg_len() directly instead of storing it in another
redundant variable.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: ccp - Release dma channels before dmaengine unrgister

A warning is shown during shutdown,

__dma_async_device_channel_unregister called while 2 clients hold a reference
WARNING: CPU: 15 PID: 1 at drivers/dma/dmaengine.c:1110 __dma_async_device_channel_unregister+0xb7/0xc0

Call dma_release_channel for occupied channles before dma_async_device_unregister.

Fixes: 54cce8ecb925 ("crypto: ccp - ccp_dmaengine_unregister release dma channels")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Koba Ko <koba.ko@canonical.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: octeontx - Remove the unneeded result variable

Return the value cptvf_send_msg_to_pf_timeout() directly instead of
storing it in another redundant variable.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: akcipher - default implementation for setting a private key

Changes from v1:
  * removed the default implementation from set_pub_key: it is assumed that
    an implementation must always have this callback defined as there are
    no use case for an algorithm, which doesn't need a public key

Many akcipher implementations (like ECDSA) support only signature
verifications, so they don't have all callbacks defined.

Commit 78a0324f4a53 ("crypto: akcipher - default implementations for
request callbacks") introduced default callbacks for sign/verify
operations, which just return an error code.

However, these are not enough, because before calling sign the caller would
likely call set_priv_key first on the instantiated transform (as the
in-kernel testmgr does). This function does not have a default stub, so the
kernel crashes, when trying to set a private key on an akcipher, which
doesn't support signature generation.

I've noticed this, when trying to add a KAT vector for ECDSA signature to
the testmgr.

With this patch the testmgr returns an error in dmesg (as it should)
instead of crashing the kernel NULL ptr dereference.

Fixes: 78a0324f4a53 ("crypto: akcipher - default implementations for request callbacks")
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: aspeed - fix return value check in aspeed_hace_probe()

In case of error, the function devm_ioremap_resource() returns
ERR_PTR() not NULL. The NULL test in the return value check must be
replaced with IS_ERR().

Fixes: 108713a713c7 ("crypto: aspeed - Add HACE hash driver")
Signed-off-by: Sun Ke <sunke32@huawei.com>
Reviewed-by: Neal Liu<neal_liu@aspeedtech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: aspeed - Fix sparse warnings

This patch fixes a bunch of bit endianness warnings and two missing
static modifiers.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Neal Liu <neal_liu@aspeedtech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: aspeed: fix format unexpected build warning

This fixes the following similar build warning when
enabling compile test:

aspeed-hace-hash.c:188:9: warning: format '%x' expects argument of type
'unsigned int', but argument 7 has type 'size_t' {aka 'long unsigned int'}
[-Wformat=]

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Neal Liu <neal_liu@aspeedtech.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: aspeed - fix build module error

If CONFIG_MODULES=y and CONFIG_CRYPTO_DEV_ASPEED=m,
build modpost would be failed.

Error messages:
  ERROR: modpost: "aspeed_register_hace_hash_algs"
  [drivers/crypto/aspeed/aspeed_crypto.ko] undefined!
  ERROR: modpost: "aspeed_unregister_hace_hash_algs"
  [drivers/crypto/aspeed/aspeed_crypto.ko] undefined!

Change build sequence to fix this.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Neal Liu <neal_liu@aspeedtech.com>
Tested-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: hisilicon/qm - return failure if vfs_num exceeds total VFs

The accelerator drivers supports users to enable VFs through the
module parameter 'vfs_num'. If the number of VFs to be enabled
exceeds the total VFs, all VFs are enabled. Change it to the same
as enabling VF through the 'sriov_numvfs' file. Returns -ERANGE
if the number of VFs to be enabled exceeds total VFs.

Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: hisilicon/qm - fix missing put dfx access

In function qm_cmd_write(), if function returns from
branch 'atomic_read(&qm->status.flags) == QM_STOP',
the got dfx access is forgotten to put.

Fixes: 607c191b371d ("crypto: hisilicon - support runtime PM for accelerator device")
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: hisilicon/qm - check mailbox operation result

After the mailbox operation is complete, the result may be unsuccessful.
It needs to check the status bits of the mailbox register,
if it fails, -EIO is returned.

Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: aspeed - Enable compile testing

This driver compile tests just fine.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Neal Liu <neal_liu@aspeedtech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: qat - fix default value of WDT timer

The QAT HW supports an hardware mechanism to detect an accelerator hang.
The reporting of a hang occurs after a watchdog timer (WDT) expires.

The value of the WDT set previously was too small and was causing false
positives.
Change the default value of the WDT to 0x7000000ULL to avoid this.

Fixes: 1c4d9d5bbb5a ("crypto: qat - enable detection of accelerators hang")
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: testmgr - fix indentation for test_acomp() args

Set right indentation for test_acomp().

Signed-off-by: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: bcm - fix repeated words in comments

Delete the redundant word 'in'.

Signed-off-by: wangjianli <wangjianli@cdjrlc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: marvell/octeontx - fix repeated words in comments

Delete the redundant word 'is'.

Signed-off-by: wangjianli <wangjianli@cdjrlc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: n2 - fix repeated words in comments

Delete the redundant word 'to'.

Signed-off-by: wangjianli <wangjianli@cdjrlc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

hwrng: imx-rngc - Moving IRQ handler registering after imx_rngc_irq_mask_clear()

Issue:
While servicing interrupt, if the IRQ happens to be because of a SEED_DONE
due to a previous boot stage, you end up completing the completion
prematurely, hence causing kernel to crash while booting.

Fix:
Moving IRQ handler registering after imx_rngc_irq_mask_clear()

Fixes: 1d5449445bd0 (hwrng: mx-rngc - add a driver for Freescale RNGC)
Signed-off-by: Kshitiz Varshney <kshitiz.varshney@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Revert "crypto: allwinner - Fix dma_map_sg error check"

This reverts commit 2b02187bdb0bb75000850bd0309e70eb8664159e.

The original code was correct and arguably more robust than the
patched version.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Revert "crypto: gemini - Fix error check for dma_map_sg"

This reverts commit 545665ad1e84eb8f047018a2f607e78cef29c7fa.

The original code was correct and arguably more robust than the
patched version.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: Kconfig - simplify compression/RNG entries

Shorten menu titles and make them consistent:
- acronym
- name
- architecture features in parenthesis
- no suffixes like "<something> algorithm", "support", or
  "hardware acceleration", or "optimized"

Simplify help text descriptions, update references, and ensure that
https references are still valid.

Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: Kconfig - simplify cipher entries

Shorten menu titles and make them consistent:
- acronym
- name
- architecture features in parenthesis
- no suffixes like "<something> algorithm", "support", or
  "hardware acceleration", or "optimized"

Simplify help text descriptions, update references, and ensure that
https references are still valid.

Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: Kconfig - simplify userspace entries

Shorten menu titles and make them consistent:
- acronym
- name
- architecture features in parenthesis
- no suffixes like "<something> algorithm", "support", or
  "hardware acceleration", or "optimized"

Simplify help text descriptions, update references, and ensure that
https references are still valid.

Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: Kconfig - simplify hash entries

Shorten menu titles and make them consistent:
- acronym
- name
- architecture features in parenthesis
- no suffixes like "<something> algorithm", "support", or
  "hardware acceleration", or "optimized"

Simplify help text descriptions, update references, and ensure that
https references are still valid.

Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: Kconfig - simplify aead entries

Shorten menu titles and make them consistent:
- acronym
- name
- architecture features in parenthesis
- no suffixes like "<something> algorithm", "support", or
  "hardware acceleration", or "optimized"

Simplify help text descriptions, update references, and ensure that
https references are still valid.

Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: Kconfig - simplify CRC entries

Shorten menu titles and make them consistent:
- acronym
- name
- architecture features in parenthesis
- no suffixes like "<something> algorithm", "support", or
  "hardware acceleration", or "optimized"

Simplify help text descriptions, update references, and ensure that
https references are still valid.

Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: Kconfig - simplify public-key entries

Shorten menu titles and make them consistent:
- acronym
- name
- architecture features in parenthesis
- no suffixes like "<something> algorithm", "support", or
  "hardware acceleration", or "optimized"

Simplify help text descriptions, update references, and ensure that
https references are still valid.

Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: Kconfig - add submenus

Convert each comment section into a submenu:
  Cryptographic API
    Crypto core or helper
    Public-key cryptography
    Block ciphers
    Length-preserving ciphers and modes
    AEAD (authenticated encryption with associated data) ciphers
    Hashes, digests, and MACs
    CRCs (cyclic redundancy checks)
    Compression
    Random number generation
    Userspace interface

That helps find entries (e.g., searching for a name like SHA512 doesn't
just report the location is Main menu -> Cryptography API, leaving you
to wade through 153 entries; it points you to the Digests page).

Move entries so they fall into the correct submenus and are
better sorted.

Suggested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: Kconfig - sort the arm entries

Sort the arm entries so all like entries are together.

Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: Kconfig - sort the arm64 entries

Sort the arm64 entries so all like entries are together.

Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: Kconfig - submenus for arm and arm64

Move ARM- and ARM64-accelerated menus into a submenu under
the Crypto API menu (paralleling all the architectures).

Make each submenu always appear if the corresponding architecture
is supported. Get rid of the ARM_CRYPTO and ARM64_CRYPTO symbols.

The "ARM Accelerated" or "ARM64 Accelerated" entry disappears from:
    General setup  --->
    Platform selection  --->
    Kernel Features  --->
    Boot options  --->
    Power management options  --->
    CPU Power Management  --->
[*] ACPI (Advanced Configuration and Power Interface) Support  --->
[*] Virtualization  --->
[*] ARM Accelerated Cryptographic Algorithms  --->
     (or)
[*] ARM64 Accelerated Cryptographic Algorithms  --->
    ...
-*- Cryptographic API  --->
    Library routines  --->
    Kernel hacking  --->

and moves into the Cryptographic API menu, which now contains:
      ...
      Accelerated Cryptographic Algorithms for CPU (arm) --->
      (or)
      Accelerated Cryptographic Algorithms for CPU (arm64) --->
[*]   Hardware crypto devices  --->
      ...

Suggested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: Kconfig - remove AES_ARM64 ref by SA2UL

Remove the CRYPTO_AES_ARM64 selection by the TI security
accelerator driver (SA2UL), which leads to this problem when
running make allmodconfig for arm (32-bit):

WARNING: unmet direct dependencies detected for CRYPTO_AES_ARM64
  Depends on [n]: CRYPTO [=y] && ARM64
  Selected by [m]:
  - CRYPTO_DEV_SA2UL [=m] && CRYPTO [=y] && CRYPTO_HW [=y] && (ARCH_K3
    || COMPILE_TEST [=y])

Fixes: 7694b6ca649fe ("crypto: sa2ul - Add crypto driver")
Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: Kconfig - move x86 entries to a submenu

Move CPU-specific crypto/Kconfig entries to arch/xxx/crypto/Kconfig
and create a submenu for them under the Crypto API menu.

Suggested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: Kconfig - move sparc entries to a submenu

Move CPU-specific crypto/Kconfig entries to arch/xxx/crypto/Kconfig
and create a submenu for them under the Crypto API menu.

Suggested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: Kconfig - move s390 entries to a submenu

Move CPU-specific crypto/Kconfig entries to arch/xxx/crypto/Kconfig
and create a submenu for them under the Crypto API menu.

Suggested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: Kconfig - move powerpc entries to a submenu

Move CPU-specific crypto/Kconfig entries to arch/xxx/crypto/Kconfig
and create a submenu for them under the Crypto API menu.

Suggested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: Kconfig - move mips entries to a submenu

Move CPU-specific crypto/Kconfig entries to arch/xxx/crypto/Kconfig
and create a submenu for them under the Crypto API menu.

Suggested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: hisilicon/qm - no judgment in the back process

Judgment should not be added in the back process. So clean it.

Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: ccree - Fix dma_map_sg error check

dma_map_sg return 0 on error, and dma_map_error is not supposed to use
here.

Cc: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: allwinner - Fix dma_map_sg error check

dma_map_sg return 0 on error.

Cc: Corentin Labbe <clabbe.montjoie@gmail.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Samuel Holland <samuel@sholland.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Minghao Chi <chi.minghao@zte.com.cn>
Cc: Peng Wu <wupeng58@huawei.com>
Cc: Alexey Khoroshilov <khoroshilov@ispras.ru>
Cc: linux-crypto@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-sunxi@lists.linux.dev
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: amlogic - Fix dma_map_sg error check

dma_map_sg return 0 on error.

Cc: Corentin Labbe <clabbe@baylibre.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Cc: linux-amlogic@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: qce - Fix dma_map_sg error check

dma_map_sg return 0 on error, fix the error check and return -EIO to
caller.

Cc: Thara Gopinath <thara.gopinath@gmail.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: sahara - Fix error check for dma_map_sg

dma_map_sg return 0 on error, it returns the number of
DMA address segments mapped (this may be shorter
than <nents> passed in if some elements of the scatter/gather
list are physically or virtually adjacent and an IOMMU maps
them with a single entry).

Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: gemini - Fix error check for dma_map_sg

dma_map_sg return 0 on error.

Cc: Corentin Labbe <clabbe@baylibre.com>
Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: drivers - move from strlcpy with unused retval to strscpy

Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.

Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: core - move from strlcpy with unused retval to strscpy

Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.

Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: aspeed - add HACE crypto driver

Add HACE crypto driver to support symmetric-key
encryption and decryption with multiple modes of
operation.

Signed-off-by: Neal Liu <neal_liu@aspeedtech.com>
Signed-off-by: Johnny Huang <johnny_huang@aspeedtech.com>
Reviewed-by: Dhananjay Phadke <dphadke@linux.microsoft.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

dt-bindings: crypto: add documentation for aspeed hace

Add device tree binding documentation for the Aspeed Hash
and Crypto Engines (HACE) Controller.

Signed-off-by: Neal Liu <neal_liu@aspeedtech.com>
Signed-off-by: Johnny Huang <johnny_huang@aspeedtech.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

ARM: dts: aspeed: Add HACE device controller node

Add hace node to device tree for AST2500/AST2600.

Signed-off-by: Neal Liu <neal_liu@aspeedtech.com>
Signed-off-by: Johnny Huang <johnny_huang@aspeedtech.com>
Reviewed-by: Dhananjay Phadke <dphadke@linux.microsoft.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

dt-bindings: clock: Add AST2500/AST2600 HACE reset definition

Add HACE reset bit definition for AST2500/AST2600.

Signed-off-by: Neal Liu <neal_liu@aspeedtech.com>
Signed-off-by: Johnny Huang <johnny_huang@aspeedtech.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: aspeed - Add HACE hash driver

Hash and Crypto Engine (HACE) is designed to accelerate the
throughput of hash data digest, encryption, and decryption.

Basically, HACE can be divided into two independently engines
- Hash Engine and Crypto Engine. This patch aims to add HACE
hash engine driver for hash accelerator.

Signed-off-by: Neal Liu <neal_liu@aspeedtech.com>
Signed-off-by: Johnny Huang <johnny_huang@aspeedtech.com>
Reviewed-by: Dhananjay Phadke <dphadke@linux.microsoft.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: ccp - Fail the PSP initialization when writing psp data file failed

Currently the OS continues the PSP initialization when there is a write
failure to the init_ex_file. Therefore, the userspace would be told that
SEV is properly INIT'd even though the psp data file is not updated.
This is problematic because later when asked for the SEV data, the OS
won't be able to provide it.

Fixes: 3d725965f836 ("crypto: ccp - Add SEV_INIT_EX support")
Reported-by: Peter Gonda <pgonda@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jacky Li <jackyli@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: ccp - Initialize PSP when reading psp data file failed

Currently the OS fails the PSP initialization when the file specified at
'init_ex_path' does not exist or has invalid content. However the SEV
spec just requires users to allocate 32KB of 0xFF in the file, which can
be taken care of by the OS easily.

To improve the robustness during the PSP init, leverage the retry
mechanism and continue the init process:

Before the first INIT_EX call, if the content is invalid or missing,
continue the process by feeding those contents into PSP instead of
aborting. PSP will then override it with 32KB 0xFF and return
SEV_RET_SECURE_DATA_INVALID status code. In the second INIT_EX call,
this 32KB 0xFF content will then be fed and PSP will write the valid
data to the file.

In order to do this, sev_read_init_ex_file should only be called once
for the first INIT_EX call. Calling it again for the second INIT_EX call
will cause the invalid file content overwriting the valid 32KB 0xFF data
provided by PSP in the first INIT_EX call.

Co-developed-by: Peter Gonda <pgonda@google.com>
Signed-off-by: Peter Gonda <pgonda@google.com>
Signed-off-by: Jacky Li <jackyli@google.com>
Reported-by: Alper Gun <alpergun@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

hwrng: imx-rngc - use devres for hwrng registration

Replace hwrng_register with devm_hwrng_register and let devres unregister
our hwrng when the device is removed.

It's possible to do this now that devres also handles clock
disable+uprepare. When we had to disable+unprepare the clock ourselves,
we had to unregister the hwrng before this and couldn't use devres.

There's nothing left to do for imx_rngc_remove, this function can go.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

hwrng: imx-rngc - use devm_clk_get_enabled

Use the new devm_clk_get_enabled function to get our clock.

We don't have to disable and unprepare the clock ourselves any more in
error paths and in the remove function.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: tcrypt - remove mode=1000

The lists of algothms checked for existence by
    modprobe tcrypt mode=1000
generates three bogus errors:
    modprobe tcrypt mode=1000

    console log:
    tcrypt: alg rot13 not found
    tcrypt: alg cts not found
    tcrypt: alg arc4 not found

rot13 is not an algorithm in the crypto API or tested.

cts is a wrapper, not a base algorithm.

arc4 is named ecb(arc4), not arc4.

Also, the list is missing numerous algorithms that are tested by
other test modes:
    blake2b-512
    blake2s-256
    crct10dif
    xxhash64
    ghash
    cast5
    sm4
    ansi_prng

Several of the algorithms are only available if
CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE is enabled:
    arc4
    khazad
    seed
    tea, xtea, xeta

Rather that fix that list, remove test mode=1000 entirely.
It seems to have limited utility, and a web search shows no
discussion of anybody using it.

Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Robert Elliott <elliott@hpe.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Merge git://git./linux/kernel/git/herbert/crypto-2.6

Merge crypto tree to pick up backport of XOR_BLOCKS Kconfig fix.

crypto: lib - remove unneeded selection of XOR_BLOCKS

CRYPTO_LIB_CHACHA_GENERIC doesn't need to select XOR_BLOCKS.  It perhaps
was thought that it's needed for __crypto_xor, but that's not the case.

Enabling XOR_BLOCKS is problematic because the XOR_BLOCKS code runs a
benchmark when it is initialized.  That causes a boot time regression on
systems that didn't have it enabled before.

Therefore, remove this unnecessary and problematic selection.

Fixes: e56e18985596 ("lib/crypto: add prompts back to crypto libraries")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

hwrng: imx-rngc - use KBUILD_MODNAME as driver name

Use KBUILD_MODNAME instead of hard coding the driver name.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: artpec6 - move spin_lock_bh to spin_lock in tasklet

it is unnecessary to call spin_lock_bh in a tasklet.

Signed-off-by: Tuo Cao <91tuocao@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: testmgr - don't generate WARN for missing modules

This userspace command:
    modprobe tcrypt
or
    modprobe tcrypt mode=0

runs all the tcrypt test cases numbered <200 (i.e., all the
test cases calling tcrypt_test() and returning return values).

Tests are sparsely numbered from 0 to 1000. For example:
    modprobe tcrypt mode=12
tests sha512, and
    modprobe tcrypt mode=152
tests rfc4543(gcm(aes))) - AES-GCM as GMAC

The test manager generates WARNING crashdumps every time it attempts
a test using an algorithm that is not available (not built-in to the
kernel or available as a module):

    alg: skcipher: failed to allocate transform for ecb(arc4): -2
    ------------[ cut here ]-----------
    alg: self-tests for ecb(arc4) (ecb(arc4)) failed (rc=-2)
    WARNING: CPU: 9 PID: 4618 at crypto/testmgr.c:5777
alg_test+0x30b/0x510
    [50 more lines....]

    ---[ end trace 0000000000000000 ]---

If the kernel is compiled with CRYPTO_USER_API_ENABLE_OBSOLETE
disabled (the default), then these algorithms are not compiled into
the kernel or made into modules and trigger WARNINGs:
    arc4 tea xtea khazad anubis xeta seed

Additionally, any other algorithms that are not enabled in .config
will generate WARNINGs. In RHEL 9.0, for example, the default
selection of algorithms leads to 16 WARNING dumps.

One attempt to fix this was by modifying tcrypt_test() to check
crypto_has_alg() and immediately return 0 if crypto_has_alg() fails,
rather than proceed and return a non-zero error value that causes
the caller (alg_test() in crypto/testmgr.c) to invoke WARN().
That knocks out too many algorithms, though; some combinations
like ctr(des3_ede) would work.

Instead, change the condition on the WARN to ignore a return
value is ENOENT, which is the value returned when the algorithm
or combination of algorithms doesn't exist. Add a pr_warn to
communicate that information in case the WARN is skipped.

This approach allows algorithm tests to work that are combinations,
not provided by one driver, like ctr(blowfish).

Result - no more WARNINGs:
modprobe tcrypt
[  115.541765] tcrypt: testing md5
[  115.556415] tcrypt: testing sha1
[  115.570463] tcrypt: testing ecb(des)
[  115.585303] cryptomgr: alg: skcipher: failed to allocate transform for ecb(des): -2
[  115.593037] cryptomgr: alg: self-tests for ecb(des) using ecb(des) failed (rc=-2)
[  115.593038] tcrypt: testing cbc(des)
[  115.610641] cryptomgr: alg: skcipher: failed to allocate transform for cbc(des): -2
[  115.618359] cryptomgr: alg: self-tests for cbc(des) using cbc(des) failed (rc=-2)
...

Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: x86/sha512 - load based on CPU features

x86 optimized crypto modules built as modules rather than built-in
to the kernel end up as .ko files in the filesystem, e.g., in
/usr/lib/modules. If the filesystem itself is a module, these might
not be available when the crypto API is initialized, resulting in
the generic implementation being used (e.g., sha512_transform rather
than sha512_transform_avx2).

In one test case, CPU utilization in the sha512 function dropped
from 15.34% to 7.18% after forcing loading of the optimized module.

Add module aliases for this x86 optimized crypto module based on CPU
feature bits so udev gets a chance to load them later in the boot
process when the filesystems are all running.

Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: hisilicon/qm - remove unneeded hardware cache write back

Data in the hardware cache needs to be written back to the memory
before the queue memory is released. Currently, the queue memory is
applied for when the driver is loaded and released when the driver is
removed. Therefore, the hardware cache does not need to be written back
when process puts queue.

Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: hisilicon/qm - remove unneeded data storage

The dump_show() is used to output hardware information for error locating.
It is not need to apply for memory to temporarily store the converted data.
It can directly output the data. Therefore, remove some unnecessary code.

Signed-off-by: Junchong Pan <panjunchong@hisilicon.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: hisilicon/qm - fix missing destroy qp_idr

In the function hisi_qm_memory_init(), if resource alloc fails after
idr_init, the initialized qp_idr needs to be destroyed.

Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: hisilicon/hpre - change return type of hpre_cluster_inqry_write()

hpre_cluster_inqry_write() always returns 0. So change the type
of hpre_cluster_inqry_write() to void.

Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: hisilicon/zip - some misc cleanup

Some cleanup for code:
1. Change names for easy to understand.
2. Unify the variables type.
3. Use the right return value.

Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: hisilicon/zip - optimization for performance

1.Remove some useless steps during doing requests.
2.Adjust the possibility of branch prediction.

Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: testmgr - extend acomp tests for NULL destination buffer

Acomp API supports NULL destination buffer for compression
and decompression requests. In such cases allocation is
performed by API.

Add test cases for crypto_acomp_compress() and crypto_acomp_decompress()
with dst buffer allocated by API.

Tests will only run if CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y.

Signed-off-by: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: api - Fix comment typo

The double `to' is duplicated in the comment, remove one.

Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: cavium - Fix comment typo

The double `the' is duplicated in the comment, remove one.

Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>